Merge remote-tracking branch 'common/android-3.0' into android-samsung-30-wip-mergedown

* common/android-3.0: (1178 commits)
  cpufreq: interactive: remove unused target_validate_time_in_idle
  cpufreq: interactive: Boost frequency on touchscreen input
  cpufreq: Separate speed target revalidate time and initial set time
  cpufreq: interactive: based hispeed bump on target freq, not actual
  cpufreq: interactive: adjust code and documentation to match
  cpufreq: interactive: configurable delay before raising above hispeed
  sync: add poll support
  sw_sync: add fill_driver_data support
  sync: add ioctl to get fence data
  sw_sync: add debug support
  sync: add debugfs support
  sync: add timestamps to sync_pts
  sw_sync: add cpu based sync driver
  sync: Add synchronization framework
  Linux 3.0.28
  Bluetooth: Fix l2cap conn failures for ssp devices
  TOMOYO: Fix mount flags checking order.
  iommu/amd: Make sure IOMMU interrupts are re-enabled on resume
  cred: copy_process() should clear child->replacement_session_keyring
  ASoC: ak4642: fixup: mute needs +1 step
  ...

Conflicts:
	mm/compaction.c

Change-Id: I3dc59225d2435eddbed0c639155179e580891ac8
Signed-off-by: JP Abgrall <jpa@google.com>

6 files changed, 147 insertions, 55 deletions

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 4e0b86a..803b67e 100755
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -498,7 +498,7 @@ config BMP085
 	  module will be called bmp085.
 
 config PCH_PHUB
-	tristate "Intel EG20T PCH / OKI SEMICONDUCTOR IOH(ML7213/ML7223) PHUB"
+	tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB"
 	depends on PCI
 	help
 	  This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of
@@ -506,12 +506,13 @@ config PCH_PHUB
 	  processor. The Topcliff has MAC address and Option ROM data in SROM.
 	  This driver can access MAC address and Option ROM data in SROM.
 
-	  This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
-	  Output Hub), ML7213 and ML7223.
-	  ML7213 IOH is for IVI(In-Vehicle Infotainment) use and ML7223 IOH is
-	  for MP(Media Phone) use.
-	  ML7213/ML7223 is companion chip for Intel Atom E6xx series.
-	  ML7213/ML7223 is completely compatible for Intel EG20T PCH.
+	  This driver also can be used for LAPIS Semiconductor's IOH,
+	  ML7213/ML7223/ML7831.
+	  ML7213 which is for IVI(In-Vehicle Infotainment) use.
+	  ML7223 IOH is for MP(Media Phone) use.
+	  ML7831 IOH is for general purpose use.
+	  ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
+	  ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
 
 	  To compile this driver as a module, choose M here: the module will
 	  be called pch_phub.
diff --git a/drivers/misc/cb710/core.c b/drivers/misc/cb710/core.c
index efec413..b1f16d6 100644
--- a/drivers/misc/cb710/core.c
+++ b/drivers/misc/cb710/core.c
@@ -244,6 +244,7 @@ static int __devinit cb710_probe(struct pci_dev *pdev,
 	if (err)
 		return err;
 
+	spin_lock_init(&chip->irq_lock);
 	chip->pdev = pdev;
 	chip->iobase = pcim_iomap_table(pdev)[0];
 
diff --git a/drivers/misc/cs5535-mfgpt.c b/drivers/misc/cs5535-mfgpt.c
index bc685bf..87a390d 100644
--- a/drivers/misc/cs5535-mfgpt.c
+++ b/drivers/misc/cs5535-mfgpt.c
@@ -262,7 +262,7 @@ static void __init reset_all_timers(void)
  * In other cases (such as with VSAless OpenFirmware), the system firmware
  * leaves timers available for us to use.
  */
-static int __init scan_timers(struct cs5535_mfgpt_chip *mfgpt)
+static int __devinit scan_timers(struct cs5535_mfgpt_chip *mfgpt)
 {
 	struct cs5535_mfgpt_timer timer = { .chip = mfgpt };
 	unsigned long flags;
diff --git a/drivers/misc/kgdbts.c b/drivers/misc/kgdbts.c
index 8cebec5..cdefef2 100644
--- a/drivers/misc/kgdbts.c
+++ b/drivers/misc/kgdbts.c
@@ -133,12 +133,17 @@ static int force_hwbrks;
 static int hwbreaks_ok;
 static int hw_break_val;
 static int hw_break_val2;
+static int cont_instead_of_sstep;
+static unsigned long cont_thread_id;
+static unsigned long sstep_thread_id;
 #if defined(CONFIG_ARM) || defined(CONFIG_MIPS) || defined(CONFIG_SPARC)
 static int arch_needs_sstep_emulation = 1;
 #else
 static int arch_needs_sstep_emulation;
 #endif
+static unsigned long cont_addr;
 static unsigned long sstep_addr;
+static int restart_from_top_after_write;
 static int sstep_state;
 
 /* Storage for the registers, in GDB format. */
@@ -186,7 +191,8 @@ static int kgdbts_unreg_thread(void *ptr)
 	 */
 	while (!final_ack)
 		msleep_interruptible(1500);
-
+	/* Pause for any other threads to exit after final ack. */
+	msleep_interruptible(1000);
 	if (configured)
 		kgdb_unregister_io_module(&kgdbts_io_ops);
 	configured = 0;
@@ -210,7 +216,7 @@ static unsigned long lookup_addr(char *arg)
 	if (!strcmp(arg, "kgdbts_break_test"))
 		addr = (unsigned long)kgdbts_break_test;
 	else if (!strcmp(arg, "sys_open"))
-		addr = (unsigned long)sys_open;
+		addr = (unsigned long)do_sys_open;
 	else if (!strcmp(arg, "do_fork"))
 		addr = (unsigned long)do_fork;
 	else if (!strcmp(arg, "hw_break_val"))
@@ -282,6 +288,16 @@ static void hw_break_val_write(void)
 	hw_break_val++;
 }
 
+static int get_thread_id_continue(char *put_str, char *arg)
+{
+	char *ptr = &put_str[11];
+
+	if (put_str[1] != 'T' || put_str[2] != '0')
+		return 1;
+	kgdb_hex2long(&ptr, &cont_thread_id);
+	return 0;
+}
+
 static int check_and_rewind_pc(char *put_str, char *arg)
 {
 	unsigned long addr = lookup_addr(arg);
@@ -298,13 +314,21 @@ static int check_and_rewind_pc(char *put_str, char *arg)
 	if (addr + BREAK_INSTR_SIZE == ip)
 		offset = -BREAK_INSTR_SIZE;
 #endif
-	if (strcmp(arg, "silent") && ip + offset != addr) {
+
+	if (arch_needs_sstep_emulation && sstep_addr &&
+	    ip + offset == sstep_addr &&
+	    ((!strcmp(arg, "sys_open") || !strcmp(arg, "do_fork")))) {
+		/* This is special case for emulated single step */
+		v2printk("Emul: rewind hit single step bp\n");
+		restart_from_top_after_write = 1;
+	} else if (strcmp(arg, "silent") && ip + offset != addr) {
 		eprintk("kgdbts: BP mismatch %lx expected %lx\n",
 			   ip + offset, addr);
 		return 1;
 	}
 	/* Readjust the instruction pointer if needed */
 	ip += offset;
+	cont_addr = ip;
 #ifdef GDB_ADJUSTS_BREAK_OFFSET
 	instruction_pointer_set(&kgdbts_regs, ip);
 #endif
@@ -314,6 +338,8 @@ static int check_and_rewind_pc(char *put_str, char *arg)
 static int check_single_step(char *put_str, char *arg)
 {
 	unsigned long addr = lookup_addr(arg);
+	static int matched_id;
+
 	/*
 	 * From an arch indepent point of view the instruction pointer
 	 * should be on a different instruction
@@ -323,6 +349,29 @@ static int check_single_step(char *put_str, char *arg)
 	gdb_regs_to_pt_regs(kgdbts_gdb_regs, &kgdbts_regs);
 	v2printk("Singlestep stopped at IP: %lx\n",
 		   instruction_pointer(&kgdbts_regs));
+
+	if (sstep_thread_id != cont_thread_id) {
+		/*
+		 * Ensure we stopped in the same thread id as before, else the
+		 * debugger should continue until the original thread that was
+		 * single stepped is scheduled again, emulating gdb's behavior.
+		 */
+		v2printk("ThrID does not match: %lx\n", cont_thread_id);
+		if (arch_needs_sstep_emulation) {
+			if (matched_id &&
+			    instruction_pointer(&kgdbts_regs) != addr)
+				goto continue_test;
+			matched_id++;
+			ts.idx -= 2;
+			sstep_state = 0;
+			return 0;
+		}
+		cont_instead_of_sstep = 1;
+		ts.idx -= 4;
+		return 0;
+	}
+continue_test:
+	matched_id = 0;
 	if (instruction_pointer(&kgdbts_regs) == addr) {
 		eprintk("kgdbts: SingleStep failed at %lx\n",
 			   instruction_pointer(&kgdbts_regs));
@@ -364,10 +413,40 @@ static int got_break(char *put_str, char *arg)
 	return 1;
 }
 
+static void get_cont_catch(char *arg)
+{
+	/* Always send detach because the test is completed at this point */
+	fill_get_buf("D");
+}
+
+static int put_cont_catch(char *put_str, char *arg)
+{
+	/* This is at the end of the test and we catch any and all input */
+	v2printk("kgdbts: cleanup task: %lx\n", sstep_thread_id);
+	ts.idx--;
+	return 0;
+}
+
+static int emul_reset(char *put_str, char *arg)
+{
+	if (strncmp(put_str, "$OK", 3))
+		return 1;
+	if (restart_from_top_after_write) {
+		restart_from_top_after_write = 0;
+		ts.idx = -1;
+	}
+	return 0;
+}
+
 static void emul_sstep_get(char *arg)
 {
 	if (!arch_needs_sstep_emulation) {
-		fill_get_buf(arg);
+		if (cont_instead_of_sstep) {
+			cont_instead_of_sstep = 0;
+			fill_get_buf("c");
+		} else {
+			fill_get_buf(arg);
+		}
 		return;
 	}
 	switch (sstep_state) {
@@ -397,9 +476,11 @@ static void emul_sstep_get(char *arg)
 static int emul_sstep_put(char *put_str, char *arg)
 {
 	if (!arch_needs_sstep_emulation) {
-		if (!strncmp(put_str+1, arg, 2))
-			return 0;
-		return 1;
+		char *ptr = &put_str[11];
+		if (put_str[1] != 'T' || put_str[2] != '0')
+			return 1;
+		kgdb_hex2long(&ptr, &sstep_thread_id);
+		return 0;
 	}
 	switch (sstep_state) {
 	case 1:
@@ -410,8 +491,7 @@ static int emul_sstep_put(char *put_str, char *arg)
 		v2printk("Stopped at IP: %lx\n",
 			 instruction_pointer(&kgdbts_regs));
 		/* Want to stop at IP + break instruction size by default */
-		sstep_addr = instruction_pointer(&kgdbts_regs) +
-			BREAK_INSTR_SIZE;
+		sstep_addr = cont_addr + BREAK_INSTR_SIZE;
 		break;
 	case 2:
 		if (strncmp(put_str, "$OK", 3)) {
@@ -423,6 +503,9 @@ static int emul_sstep_put(char *put_str, char *arg)
 		if (strncmp(put_str, "$T0", 3)) {
 			eprintk("kgdbts: failed continue sstep\n");
 			return 1;
+		} else {
+			char *ptr = &put_str[11];
+			kgdb_hex2long(&ptr, &sstep_thread_id);
 		}
 		break;
 	case 4:
@@ -501,10 +584,10 @@ static struct test_struct bad_read_test[] = {
 static struct test_struct singlestep_break_test[] = {
 	{ "?", "S0*" }, /* Clear break points */
 	{ "kgdbts_break_test", "OK", sw_break, }, /* set sw breakpoint */
-	{ "c", "T0*", }, /* Continue */
+	{ "c", "T0*", NULL, get_thread_id_continue }, /* Continue */
+	{ "kgdbts_break_test", "OK", sw_rem_break }, /*remove breakpoint */
 	{ "g", "kgdbts_break_test", NULL, check_and_rewind_pc },
 	{ "write", "OK", write_regs }, /* Write registers */
-	{ "kgdbts_break_test", "OK", sw_rem_break }, /*remove breakpoint */
 	{ "s", "T0*", emul_sstep_get, emul_sstep_put }, /* Single step */
 	{ "g", "kgdbts_break_test", NULL, check_single_step },
 	{ "kgdbts_break_test", "OK", sw_break, }, /* set sw breakpoint */
@@ -522,16 +605,16 @@ static struct test_struct singlestep_break_test[] = {
 static struct test_struct do_fork_test[] = {
 	{ "?", "S0*" }, /* Clear break points */
 	{ "do_fork", "OK", sw_break, }, /* set sw breakpoint */
-	{ "c", "T0*", }, /* Continue */
-	{ "g", "do_fork", NULL, check_and_rewind_pc }, /* check location */
-	{ "write", "OK", write_regs }, /* Write registers */
+	{ "c", "T0*", NULL, get_thread_id_continue }, /* Continue */
 	{ "do_fork", "OK", sw_rem_break }, /*remove breakpoint */
+	{ "g", "do_fork", NULL, check_and_rewind_pc }, /* check location */
+	{ "write", "OK", write_regs, emul_reset }, /* Write registers */
 	{ "s", "T0*", emul_sstep_get, emul_sstep_put }, /* Single step */
 	{ "g", "do_fork", NULL, check_single_step },
 	{ "do_fork", "OK", sw_break, }, /* set sw breakpoint */
 	{ "7", "T0*", skip_back_repeat_test }, /* Loop based on repeat_test */
 	{ "D", "OK", NULL, final_ack_set }, /* detach and unregister I/O */
-	{ "", "" },
+	{ "", "", get_cont_catch, put_cont_catch },
 };
 
 /* Test for hitting a breakpoint at sys_open for what ever the number
@@ -540,16 +623,16 @@ static struct test_struct do_fork_test[] = {
 static struct test_struct sys_open_test[] = {
 	{ "?", "S0*" }, /* Clear break points */
 	{ "sys_open", "OK", sw_break, }, /* set sw breakpoint */
-	{ "c", "T0*", }, /* Continue */
-	{ "g", "sys_open", NULL, check_and_rewind_pc }, /* check location */
-	{ "write", "OK", write_regs }, /* Write registers */
+	{ "c", "T0*", NULL, get_thread_id_continue }, /* Continue */
 	{ "sys_open", "OK", sw_rem_break }, /*remove breakpoint */
+	{ "g", "sys_open", NULL, check_and_rewind_pc }, /* check location */
+	{ "write", "OK", write_regs, emul_reset }, /* Write registers */
 	{ "s", "T0*", emul_sstep_get, emul_sstep_put }, /* Single step */
 	{ "g", "sys_open", NULL, check_single_step },
 	{ "sys_open", "OK", sw_break, }, /* set sw breakpoint */
 	{ "7", "T0*", skip_back_repeat_test }, /* Loop based on repeat_test */
 	{ "D", "OK", NULL, final_ack_set }, /* detach and unregister I/O */
-	{ "", "" },
+	{ "", "", get_cont_catch, put_cont_catch },
 };
 
 /*
@@ -692,8 +775,8 @@ static int run_simple_test(int is_get_char, int chr)
 	/* This callback is a put char which is when kgdb sends data to
 	 * this I/O module.
 	 */
-	if (ts.tst[ts.idx].get[0] == '\0' &&
-		ts.tst[ts.idx].put[0] == '\0') {
+	if (ts.tst[ts.idx].get[0] == '\0' && ts.tst[ts.idx].put[0] == '\0' &&
+	    !ts.tst[ts.idx].get_handler) {
 		eprintk("kgdbts: ERROR: beyond end of test on"
 			   " '%s' line %i\n", ts.name, ts.idx);
 		return 0;
@@ -906,6 +989,17 @@ static void kgdbts_run_tests(void)
 	if (ptr)
 		sstep_test = simple_strtol(ptr+1, NULL, 10);
 
+	/* All HW break point tests */
+	if (arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT) {
+		hwbreaks_ok = 1;
+		v1printk("kgdbts:RUN hw breakpoint test\n");
+		run_breakpoint_test(1);
+		v1printk("kgdbts:RUN hw write breakpoint test\n");
+		run_hw_break_test(1);
+		v1printk("kgdbts:RUN access write breakpoint test\n");
+		run_hw_break_test(0);
+	}
+
 	/* required internal KGDB tests */
 	v1printk("kgdbts:RUN plant and detach test\n");
 	run_plant_and_detach_test(0);
@@ -923,35 +1017,11 @@ static void kgdbts_run_tests(void)
 
 	/* ===Optional tests=== */
 
-	/* All HW break point tests */
-	if (arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT) {
-		hwbreaks_ok = 1;
-		v1printk("kgdbts:RUN hw breakpoint test\n");
-		run_breakpoint_test(1);
-		v1printk("kgdbts:RUN hw write breakpoint test\n");
-		run_hw_break_test(1);
-		v1printk("kgdbts:RUN access write breakpoint test\n");
-		run_hw_break_test(0);
-	}
-
 	if (nmi_sleep) {
 		v1printk("kgdbts:RUN NMI sleep %i seconds test\n", nmi_sleep);
 		run_nmi_sleep_test(nmi_sleep);
 	}
 
-#ifdef CONFIG_DEBUG_RODATA
-	/* Until there is an api to write to read-only text segments, use
-	 * HW breakpoints for the remainder of any tests, else print a
-	 * failure message if hw breakpoints do not work.
-	 */
-	if (!(arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT && hwbreaks_ok)) {
-		eprintk("kgdbts: HW breakpoints do not work,"
-			"skipping remaining tests\n");
-		return;
-	}
-	force_hwbrks = 1;
-#endif /* CONFIG_DEBUG_RODATA */
-
 	/* If the do_fork test is run it will be the last test that is
 	 * executed because a kernel thread will be spawned at the very
 	 * end to unregister the debug hooks.
diff --git a/drivers/misc/pch_phub.c b/drivers/misc/pch_phub.c
index 5fe79df..97e1a1f 100644
--- a/drivers/misc/pch_phub.c
+++ b/drivers/misc/pch_phub.c
@@ -73,6 +73,9 @@
 #define PCI_DEVICE_ID_ROHM_ML7223_mPHUB	0x8012 /* for Bus-m */
 #define PCI_DEVICE_ID_ROHM_ML7223_nPHUB	0x8002 /* for Bus-n */
 
+/* Macros for ML7831 */
+#define PCI_DEVICE_ID_ROHM_ML7831_PHUB 0x8801
+
 /* SROM ACCESS Macro */
 #define PCH_WORD_ADDR_MASK (~((1 << 2) - 1))
 
@@ -464,7 +467,7 @@ static int pch_phub_write_gbe_mac_addr(struct pch_phub_reg *chip, u8 *data)
 	int retval;
 	int i;
 
-	if (chip->ioh_type == 1) /* EG20T */
+	if ((chip->ioh_type == 1) || (chip->ioh_type == 5)) /* EG20T or ML7831*/
 		retval = pch_phub_gbe_serial_rom_conf(chip);
 	else	/* ML7223 */
 		retval = pch_phub_gbe_serial_rom_conf_mp(chip);
@@ -754,6 +757,22 @@ static int __devinit pch_phub_probe(struct pci_dev *pdev,
 		chip->pch_opt_rom_start_address =\
 						 PCH_PHUB_ROM_START_ADDR_ML7223;
 		chip->pch_mac_start_address = PCH_PHUB_MAC_START_ADDR_ML7223;
+	} else if (id->driver_data == 5) { /* ML7831 */
+		retval = sysfs_create_file(&pdev->dev.kobj,
+					   &dev_attr_pch_mac.attr);
+		if (retval)
+			goto err_sysfs_create;
+
+		retval = sysfs_create_bin_file(&pdev->dev.kobj, &pch_bin_attr);
+		if (retval)
+			goto exit_bin_attr;
+
+		/* set the prefech value */
+		iowrite32(0x000affaa, chip->pch_phub_base_address + 0x14);
+		/* set the interrupt delay value */
+		iowrite32(0x25, chip->pch_phub_base_address + 0x44);
+		chip->pch_opt_rom_start_address = PCH_PHUB_ROM_START_ADDR_EG20T;
+		chip->pch_mac_start_address = PCH_PHUB_MAC_START_ADDR_EG20T;
 	}
 
 	chip->ioh_type = id->driver_data;
@@ -838,6 +857,7 @@ static struct pci_device_id pch_phub_pcidev_id[] = {
 	{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7213_PHUB), 2,  },
 	{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7223_mPHUB), 3,  },
 	{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7223_nPHUB), 4,  },
+	{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7831_PHUB), 5,  },
 	{ }
 };
 MODULE_DEVICE_TABLE(pci, pch_phub_pcidev_id);
diff --git a/drivers/misc/spear13xx_pcie_gadget.c b/drivers/misc/spear13xx_pcie_gadget.c
index cfbddbe..43d073b 100644
--- a/drivers/misc/spear13xx_pcie_gadget.c
+++ b/drivers/misc/spear13xx_pcie_gadget.c
@@ -903,6 +903,6 @@ static void __exit spear_pcie_gadget_exit(void)
 }
 module_exit(spear_pcie_gadget_exit);
 
-MODULE_ALIAS("pcie-gadget-spear");
+MODULE_ALIAS("platform:pcie-gadget-spear");
 MODULE_AUTHOR("Pratyush Anand");
 MODULE_LICENSE("GPL");