Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-next-2.6

50 files changed, 1250 insertions, 3676 deletions

diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 22e1e9a..865f298 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -14,30 +14,6 @@ config WLAN_PRE80211
 	  This option does not affect the kernel build, it only
 	  lets you choose drivers.
 
-config STRIP
-	tristate "STRIP (Metricom starmode radio IP)"
-	depends on INET && WLAN_PRE80211
-	select WIRELESS_EXT
-	---help---
-	  Say Y if you have a Metricom radio and intend to use Starmode Radio
-	  IP. STRIP is a radio protocol developed for the MosquitoNet project
-	  (on the WWW at <http://mosquitonet.stanford.edu/>) to send Internet
-	  traffic using Metricom radios.  Metricom radios are small, battery
-	  powered, 100kbit/sec packet radio transceivers, about the size and
-	  weight of a cellular telephone. (You may also have heard them called
-	  "Metricom modems" but we avoid the term "modem" because it misleads
-	  many people into thinking that you can plug a Metricom modem into a
-	  phone line and use it as a modem.)
-
-	  You can use STRIP on any Linux machine with a serial port, although
-	  it is obviously most useful for people with laptop computers. If you
-	  think you might get a Metricom radio in the future, there is no harm
-	  in saying Y to STRIP now, except that it makes the kernel a bit
-	  bigger.
-
-	  To compile this as a module, choose M here: the module will be
-	  called strip.
-
 config ARLAN
 	tristate "Aironet Arlan 655 & IC2200 DS support"
 	depends on ISA && !64BIT && WLAN_PRE80211
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
index 54a4f6f..2668934 100644
--- a/drivers/net/wireless/Makefile
+++ b/drivers/net/wireless/Makefile
@@ -6,7 +6,6 @@ obj-$(CONFIG_IPW2100) += ipw2100.o
 
 obj-$(CONFIG_IPW2200) += ipw2200.o
 
-obj-$(CONFIG_STRIP) += strip.o
 obj-$(CONFIG_ARLAN) += arlan.o 
 
 arlan-objs := arlan-main.o arlan-proc.o
diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c
index 0ba55ba..3333d45 100644
--- a/drivers/net/wireless/adm8211.c
+++ b/drivers/net/wireless/adm8211.c
@@ -1685,7 +1685,6 @@ static void adm8211_tx_raw(struct ieee80211_hw *dev, struct sk_buff *skb,
 static int adm8211_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 {
 	struct adm8211_tx_hdr *txhdr;
-	u16 fc;
 	size_t payload_len, hdrlen;
 	int plcp, dur, len, plcp_signal, short_preamble;
 	struct ieee80211_hdr *hdr;
@@ -1696,8 +1695,7 @@ static int adm8211_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 	plcp_signal = txrate->bitrate;
 
 	hdr = (struct ieee80211_hdr *)skb->data;
-	fc = le16_to_cpu(hdr->frame_control) & ~IEEE80211_FCTL_PROTECTED;
-	hdrlen = ieee80211_get_hdrlen(fc);
+	hdrlen = ieee80211_hdrlen(hdr->frame_control);
 	memcpy(skb->cb, skb->data, hdrlen);
 	hdr = (struct ieee80211_hdr *)skb->cb;
 	skb_pull(skb, hdrlen);
@@ -1711,8 +1709,6 @@ static int adm8211_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 	txhdr->frame_control = hdr->frame_control;
 
 	len = hdrlen + payload_len + FCS_LEN;
-	if (fc & IEEE80211_FCTL_PROTECTED)
-		len += 8;
 
 	txhdr->frag = cpu_to_le16(0x0FFF);
 	adm8211_calc_durations(&dur, &plcp, payload_len,
@@ -1730,9 +1726,6 @@ static int adm8211_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 	if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS)
 		txhdr->header_control |= cpu_to_le16(ADM8211_TXHDRCTL_ENABLE_RTS);
 
-	if (fc & IEEE80211_FCTL_PROTECTED)
-		txhdr->header_control |= cpu_to_le16(ADM8211_TXHDRCTL_ENABLE_WEP_ENGINE);
-
 	txhdr->retry_limit = info->control.retry_limit;
 
 	adm8211_tx_raw(dev, skb, plcp_signal, hdrlen);
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index e30f8b7..b5cd850 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -85,10 +85,10 @@ static struct pci_driver airo_driver = {
 
 /* Include Wireless Extension definition and check version - Jean II */
 #include <linux/wireless.h>
-#define WIRELESS_SPY		// enable iwspy support
-#include <net/iw_handler.h>	// New driver API
+#define WIRELESS_SPY		/* enable iwspy support */
+#include <net/iw_handler.h>	/* New driver API */
 
-#define CISCO_EXT		// enable Cisco extensions
+#define CISCO_EXT		/* enable Cisco extensions */
 #ifdef CISCO_EXT
 #include <linux/delay.h>
 #endif
@@ -281,7 +281,7 @@ MODULE_PARM_DESC(proc_perm, "The permission bits of the files in /proc");
 /* This is a kind of sloppy hack to get this information to OUT4500 and
    IN4500.  I would be extremely interested in the situation where this
    doesn't work though!!! */
-static int do8bitIO = 0;
+static int do8bitIO /* = 0 */;
 
 /* Return codes */
 #define SUCCESS 0
@@ -398,8 +398,8 @@ static int do8bitIO = 0;
 #define MAXTXQ 64
 
 /* BAP selectors */
-#define BAP0 0 // Used for receiving packets
-#define BAP1 2 // Used for xmiting packets and working with RIDS
+#define BAP0 0 /* Used for receiving packets */
+#define BAP1 2 /* Used for xmiting packets and working with RIDS */
 
 /* Flags */
 #define COMMAND_BUSY 0x8000
@@ -5522,11 +5522,13 @@ static int airo_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 	Cmd cmd;
 	Resp rsp;
 
-	if ((ai->APList == NULL) &&
-		(ai->APList = kmalloc(sizeof(APListRid), GFP_KERNEL)) == NULL)
+	if (!ai->APList)
+		ai->APList = kmalloc(sizeof(APListRid), GFP_KERNEL);
+	if (!ai->APList)
 		return -ENOMEM;
-	if ((ai->SSID == NULL) &&
-		(ai->SSID = kmalloc(sizeof(SsidRid), GFP_KERNEL)) == NULL)
+	if (!ai->SSID)
+		ai->SSID = kmalloc(sizeof(SsidRid), GFP_KERNEL);
+	if (!ai->SSID)
 		return -ENOMEM;
 	readAPListRid(ai, ai->APList);
 	readSsidRid(ai, ai->SSID);
@@ -5537,7 +5539,7 @@ static int airo_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 	disable_MAC(ai, 0);
 	netif_device_detach(dev);
 	ai->power = state;
-	cmd.cmd=HOSTSLEEP;
+	cmd.cmd = HOSTSLEEP;
 	issuecommand(ai, &cmd, &rsp);
 
 	pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
@@ -5567,7 +5569,7 @@ static int airo_pci_resume(struct pci_dev *pdev)
 		msleep(100);
 	}
 
-	set_bit (FLAG_COMMIT, &ai->flags);
+	set_bit(FLAG_COMMIT, &ai->flags);
 	disable_MAC(ai, 0);
         msleep(200);
 	if (ai->SSID) {
@@ -5594,9 +5596,6 @@ static int airo_pci_resume(struct pci_dev *pdev)
 static int __init airo_init_module( void )
 {
 	int i;
-#if 0
-	int have_isa_dev = 0;
-#endif
 
 	airo_entry = create_proc_entry("driver/aironet",
 				       S_IFDIR | airo_perm,
@@ -5607,15 +5606,11 @@ static int __init airo_init_module( void )
 		airo_entry->gid = proc_gid;
 	}
 
-	for( i = 0; i < 4 && io[i] && irq[i]; i++ ) {
+	for (i = 0; i < 4 && io[i] && irq[i]; i++) {
 		airo_print_info("", "Trying to configure ISA adapter at irq=%d "
 			"io=0x%x", irq[i], io[i] );
 		if (init_airo_card( irq[i], io[i], 0, NULL ))
-#if 0
-			have_isa_dev = 1;
-#else
 			/* do nothing */ ;
-#endif
 	}
 
 #ifdef CONFIG_PCI
@@ -5661,7 +5656,7 @@ static void __exit airo_cleanup_module( void )
 
 static u8 airo_rssi_to_dbm (tdsRssiEntry *rssi_rid, u8 rssi)
 {
-	if( !rssi_rid )
+	if (!rssi_rid)
 		return 0;
 
 	return (0x100 - rssi_rid[rssi].rssidBm);
@@ -5671,10 +5666,10 @@ static u8 airo_dbm_to_pct (tdsRssiEntry *rssi_rid, u8 dbm)
 {
 	int i;
 
-	if( !rssi_rid )
+	if (!rssi_rid)
 		return 0;
 
-	for( i = 0; i < 256; i++ )
+	for (i = 0; i < 256; i++)
 		if (rssi_rid[i].rssidBm == dbm)
 			return rssi_rid[i].rssipct;
 
@@ -7156,6 +7151,7 @@ out:
  * format that the Wireless Tools will understand - Jean II
  */
 static inline char *airo_translate_scan(struct net_device *dev,
+					struct iw_request_info *info,
 					char *current_ev,
 					char *end_buf,
 					BSSListRid *bss)
@@ -7172,7 +7168,8 @@ static inline char *airo_translate_scan(struct net_device *dev,
 	iwe.cmd = SIOCGIWAP;
 	iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
 	memcpy(iwe.u.ap_addr.sa_data, bss->bssid, ETH_ALEN);
-	current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_ADDR_LEN);
+	current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+					  &iwe, IW_EV_ADDR_LEN);
 
 	/* Other entries will be displayed in the order we give them */
 
@@ -7182,7 +7179,8 @@ static inline char *airo_translate_scan(struct net_device *dev,
 		iwe.u.data.length = 32;
 	iwe.cmd = SIOCGIWESSID;
 	iwe.u.data.flags = 1;
-	current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, bss->ssid);
+	current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+					  &iwe, bss->ssid);
 
 	/* Add mode */
 	iwe.cmd = SIOCGIWMODE;
@@ -7192,7 +7190,8 @@ static inline char *airo_translate_scan(struct net_device *dev,
 			iwe.u.mode = IW_MODE_MASTER;
 		else
 			iwe.u.mode = IW_MODE_ADHOC;
-		current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_UINT_LEN);
+		current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+						  &iwe, IW_EV_UINT_LEN);
 	}
 
 	/* Add frequency */
@@ -7203,7 +7202,8 @@ static inline char *airo_translate_scan(struct net_device *dev,
 	 */
 	iwe.u.freq.m = frequency_list[iwe.u.freq.m - 1] * 100000;
 	iwe.u.freq.e = 1;
-	current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_FREQ_LEN);
+	current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+					  &iwe, IW_EV_FREQ_LEN);
 
 	dBm = le16_to_cpu(bss->dBm);
 
@@ -7223,7 +7223,8 @@ static inline char *airo_translate_scan(struct net_device *dev,
 				| IW_QUAL_DBM;
 	}
 	iwe.u.qual.noise = ai->wstats.qual.noise;
-	current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_QUAL_LEN);
+	current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+					  &iwe, IW_EV_QUAL_LEN);
 
 	/* Add encryption capability */
 	iwe.cmd = SIOCGIWENCODE;
@@ -7232,11 +7233,12 @@ static inline char *airo_translate_scan(struct net_device *dev,
 	else
 		iwe.u.data.flags = IW_ENCODE_DISABLED;
 	iwe.u.data.length = 0;
-	current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, bss->ssid);
+	current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+					  &iwe, bss->ssid);
 
 	/* Rate : stuffing multiple values in a single event require a bit
 	 * more of magic - Jean II */
-	current_val = current_ev + IW_EV_LCP_LEN;
+	current_val = current_ev + iwe_stream_lcp_len(info);
 
 	iwe.cmd = SIOCGIWRATE;
 	/* Those two flags are ignored... */
@@ -7249,10 +7251,12 @@ static inline char *airo_translate_scan(struct net_device *dev,
 		/* Bit rate given in 500 kb/s units (+ 0x80) */
 		iwe.u.bitrate.value = ((bss->rates[i] & 0x7f) * 500000);
 		/* Add new value to event */
-		current_val = iwe_stream_add_value(current_ev, current_val, end_buf, &iwe, IW_EV_PARAM_LEN);
+		current_val = iwe_stream_add_value(info, current_ev,
+						   current_val, end_buf,
+						   &iwe, IW_EV_PARAM_LEN);
 	}
 	/* Check if we added any event */
-	if((current_val - current_ev) > IW_EV_LCP_LEN)
+	if ((current_val - current_ev) > iwe_stream_lcp_len(info))
 		current_ev = current_val;
 
 	/* Beacon interval */
@@ -7261,7 +7265,8 @@ static inline char *airo_translate_scan(struct net_device *dev,
 		iwe.cmd = IWEVCUSTOM;
 		sprintf(buf, "bcn_int=%d", bss->beaconInterval);
 		iwe.u.data.length = strlen(buf);
-		current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, buf);
+		current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+						  &iwe, buf);
 		kfree(buf);
 	}
 
@@ -7295,8 +7300,10 @@ static inline char *airo_translate_scan(struct net_device *dev,
 					iwe.cmd = IWEVGENIE;
 					iwe.u.data.length = min(info_element->len + 2,
 								  MAX_WPA_IE_LEN);
-					current_ev = iwe_stream_add_point(current_ev, end_buf,
-							&iwe, (char *) info_element);
+					current_ev = iwe_stream_add_point(
+							info, current_ev,
+							end_buf, &iwe,
+							(char *) info_element);
 				}
 				break;
 
@@ -7304,8 +7311,9 @@ static inline char *airo_translate_scan(struct net_device *dev,
 				iwe.cmd = IWEVGENIE;
 				iwe.u.data.length = min(info_element->len + 2,
 							  MAX_WPA_IE_LEN);
-				current_ev = iwe_stream_add_point(current_ev, end_buf,
-						&iwe, (char *) info_element);
+				current_ev = iwe_stream_add_point(
+					info, current_ev, end_buf,
+					&iwe, (char *) info_element);
 				break;
 
 			default:
@@ -7344,7 +7352,7 @@ static int airo_get_scan(struct net_device *dev,
 
 	list_for_each_entry (net, &ai->network_list, list) {
 		/* Translate to WE format this entry */
-		current_ev = airo_translate_scan(dev, current_ev,
+		current_ev = airo_translate_scan(dev, info, current_ev,
 						 extra + dwrq->length,
 						 &net->bss);
 
diff --git a/drivers/net/wireless/ath5k/Kconfig b/drivers/net/wireless/ath5k/Kconfig
index f1f2aea..75383a5 100644
--- a/drivers/net/wireless/ath5k/Kconfig
+++ b/drivers/net/wireless/ath5k/Kconfig
@@ -1,6 +1,9 @@
 config ATH5K
 	tristate "Atheros 5xxx wireless cards support"
 	depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
+	select MAC80211_LEDS
+	select LEDS_CLASS
+	select NEW_LEDS
 	---help---
 	  This module adds support for wireless adapters based on
 	  Atheros 5xxx chipset.
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index 85045af..a43e9b2 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -58,11 +58,6 @@
 #include "reg.h"
 #include "debug.h"
 
-enum {
-	ATH_LED_TX,
-	ATH_LED_RX,
-};
-
 static int ath5k_calinterval = 10; /* Calibrate PHY every 10 secs (TODO: Fixme) */
 
 
@@ -309,13 +304,10 @@ static void 	ath5k_tasklet_reset(unsigned long data);
 
 static void 	ath5k_calibrate(unsigned long data);
 /* LED functions */
-static void 	ath5k_led_off(unsigned long data);
-static void 	ath5k_led_blink(struct ath5k_softc *sc,
-				unsigned int on,
-				unsigned int off);
-static void 	ath5k_led_event(struct ath5k_softc *sc,
-				int event);
-
+static int	ath5k_init_leds(struct ath5k_softc *sc);
+static void	ath5k_led_enable(struct ath5k_softc *sc);
+static void	ath5k_led_off(struct ath5k_softc *sc);
+static void	ath5k_unregister_leds(struct ath5k_softc *sc);
 
 /*
  * Module init/exit functions
@@ -596,8 +588,7 @@ ath5k_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
 	struct ath5k_softc *sc = hw->priv;
 
-	if (test_bit(ATH_STAT_LEDSOFT, sc->status))
-		ath5k_hw_set_gpio(sc->ah, sc->led_pin, 1);
+	ath5k_led_off(sc);
 
 	ath5k_stop_hw(sc);
 	pci_save_state(pdev);
@@ -632,10 +623,7 @@ ath5k_pci_resume(struct pci_dev *pdev)
 	pci_write_config_byte(pdev, 0x41, 0);
 
 	ath5k_init(sc);
-	if (test_bit(ATH_STAT_LEDSOFT, sc->status)) {
-		ath5k_hw_set_gpio_output(ah, sc->led_pin);
-		ath5k_hw_set_gpio(ah, sc->led_pin, 0);
-	}
+	ath5k_led_enable(sc);
 
 	/*
 	 * Reset the key cache since some parts do not
@@ -742,27 +730,6 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
 	tasklet_init(&sc->txtq, ath5k_tasklet_tx, (unsigned long)sc);
 	tasklet_init(&sc->restq, ath5k_tasklet_reset, (unsigned long)sc);
 	setup_timer(&sc->calib_tim, ath5k_calibrate, (unsigned long)sc);
-	setup_timer(&sc->led_tim, ath5k_led_off, (unsigned long)sc);
-
-	sc->led_on = 0; /* low true */
-	/*
-	 * Auto-enable soft led processing for IBM cards and for
-	 * 5211 minipci cards.
-	 */
-	if (pdev->device == PCI_DEVICE_ID_ATHEROS_AR5212_IBM ||
-			pdev->device == PCI_DEVICE_ID_ATHEROS_AR5211) {
-		__set_bit(ATH_STAT_LEDSOFT, sc->status);
-		sc->led_pin = 0;
-	}
-	/* Enable softled on PIN1 on HP Compaq nc6xx, nc4000 & nx5000 laptops */
-	if (pdev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ) {
-		__set_bit(ATH_STAT_LEDSOFT, sc->status);
-		sc->led_pin = 0;
-	}
-	if (test_bit(ATH_STAT_LEDSOFT, sc->status)) {
-		ath5k_hw_set_gpio_output(ah, sc->led_pin);
-		ath5k_hw_set_gpio(ah, sc->led_pin, !sc->led_on);
-	}
 
 	ath5k_hw_get_lladdr(ah, mac);
 	SET_IEEE80211_PERM_ADDR(hw, mac);
@@ -776,6 +743,8 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
 		goto err_queues;
 	}
 
+	ath5k_init_leds(sc);
+
 	return 0;
 err_queues:
 	ath5k_txq_release(sc);
@@ -809,6 +778,7 @@ ath5k_detach(struct pci_dev *pdev, struct ieee80211_hw *hw)
 	ath5k_desc_free(sc, pdev);
 	ath5k_txq_release(sc);
 	ath5k_hw_release_tx_queue(sc->ah, sc->bhalq);
+	ath5k_unregister_leds(sc);
 
 	/*
 	 * NB: can't reclaim these until after ieee80211_ifdetach
@@ -1060,65 +1030,9 @@ ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan)
 	return 0;
 }
 
-/*
- * TODO: CLEAN THIS !!!
- */
 static void
 ath5k_setcurmode(struct ath5k_softc *sc, unsigned int mode)
 {
-	if (unlikely(test_bit(ATH_STAT_LEDSOFT, sc->status))) {
-		/* from Atheros NDIS driver, w/ permission */
-		static const struct {
-			u16 rate;	/* tx/rx 802.11 rate */
-			u16 timeOn;	/* LED on time (ms) */
-			u16 timeOff;	/* LED off time (ms) */
-		} blinkrates[] = {
-			{ 108,  40,  10 },
-			{  96,  44,  11 },
-			{  72,  50,  13 },
-			{  48,  57,  14 },
-			{  36,  67,  16 },
-			{  24,  80,  20 },
-			{  22, 100,  25 },
-			{  18, 133,  34 },
-			{  12, 160,  40 },
-			{  10, 200,  50 },
-			{   6, 240,  58 },
-			{   4, 267,  66 },
-			{   2, 400, 100 },
-			{   0, 500, 130 }
-		};
-		const struct ath5k_rate_table *rt =
-				ath5k_hw_get_rate_table(sc->ah, mode);
-		unsigned int i, j;
-
-		BUG_ON(rt == NULL);
-
-		memset(sc->hwmap, 0, sizeof(sc->hwmap));
-		for (i = 0; i < 32; i++) {
-			u8 ix = rt->rate_code_to_index[i];
-			if (ix == 0xff) {
-				sc->hwmap[i].ledon = msecs_to_jiffies(500);
-				sc->hwmap[i].ledoff = msecs_to_jiffies(130);
-				continue;
-			}
-			sc->hwmap[i].txflags = IEEE80211_RADIOTAP_F_DATAPAD;
-			/* receive frames include FCS */
-			sc->hwmap[i].rxflags = sc->hwmap[i].txflags |
-					IEEE80211_RADIOTAP_F_FCS;
-			/* setup blink rate table to avoid per-packet lookup */
-			for (j = 0; j < ARRAY_SIZE(blinkrates) - 1; j++)
-				if (blinkrates[j].rate == /* XXX why 7f? */
-						(rt->rates[ix].dot11_rate&0x7f))
-					break;
-
-			sc->hwmap[i].ledon = msecs_to_jiffies(blinkrates[j].
-					timeOn);
-			sc->hwmap[i].ledoff = msecs_to_jiffies(blinkrates[j].
-					timeOff);
-		}
-	}
-
 	sc->curmode = mode;
 
 	if (mode == AR5K_MODE_11A) {
@@ -1691,9 +1605,9 @@ ath5k_rx_decrypted(struct ath5k_softc *sc, struct ath5k_desc *ds,
 	/* Apparently when a default key is used to decrypt the packet
 	   the hw does not set the index used to decrypt.  In such cases
 	   get the index from the packet. */
-	if ((le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_PROTECTED) &&
-			!(rs->rs_status & AR5K_RXERR_DECRYPT) &&
-			skb->len >= hlen + 4) {
+	if (ieee80211_has_protected(hdr->frame_control) &&
+	    !(rs->rs_status & AR5K_RXERR_DECRYPT) &&
+	    skb->len >= hlen + 4) {
 		keyix = skb->data[hlen + 3] >> 6;
 
 		if (test_bit(keyix, sc->keymap))
@@ -1712,10 +1626,7 @@ ath5k_check_ibss_tsf(struct ath5k_softc *sc, struct sk_buff *skb,
 	u32 hw_tu;
 	struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)skb->data;
 
-	if ((le16_to_cpu(mgmt->frame_control) & IEEE80211_FCTL_FTYPE) ==
-		IEEE80211_FTYPE_MGMT &&
-	    (le16_to_cpu(mgmt->frame_control) & IEEE80211_FCTL_STYPE) ==
-		IEEE80211_STYPE_BEACON &&
+	if (ieee80211_is_beacon(mgmt->frame_control) &&
 	    le16_to_cpu(mgmt->u.beacon.capab_info) & WLAN_CAPABILITY_IBSS &&
 	    memcmp(mgmt->bssid, sc->ah->ah_bssid, ETH_ALEN) == 0) {
 		/*
@@ -1903,8 +1814,6 @@ accept:
 			ath5k_check_ibss_tsf(sc, skb, &rxs);
 
 		__ieee80211_rx(sc->hw, skb, &rxs);
-		sc->led_rxrate = rs.rs_rate;
-		ath5k_led_event(sc, ATH_LED_RX);
 next:
 		list_move_tail(&bf->list, &sc->rxbuf);
 	} while (ath5k_rxbuf_setup(sc, bf) == 0);
@@ -1985,13 +1894,9 @@ ath5k_tasklet_tx(unsigned long data)
 	struct ath5k_softc *sc = (void *)data;
 
 	ath5k_tx_processq(sc, sc->txq);
-
-	ath5k_led_event(sc, ATH_LED_TX);
 }
 
 
-
-
 /*****************\
 * Beacon handling *
 \*****************/
@@ -2366,11 +2271,7 @@ ath5k_stop_locked(struct ath5k_softc *sc)
 	ieee80211_stop_queues(sc->hw);
 
 	if (!test_bit(ATH_STAT_INVALID, sc->status)) {
-		if (test_bit(ATH_STAT_LEDSOFT, sc->status)) {
-			del_timer_sync(&sc->led_tim);
-			ath5k_hw_set_gpio(ah, sc->led_pin, !sc->led_on);
-			__clear_bit(ATH_STAT_LEDBLINKING, sc->status);
-		}
+		ath5k_led_off(sc);
 		ath5k_hw_set_intr(ah, 0);
 	}
 	ath5k_txq_cleanup(sc);
@@ -2566,55 +2467,124 @@ ath5k_calibrate(unsigned long data)
 \***************/
 
 static void
-ath5k_led_off(unsigned long data)
+ath5k_led_enable(struct ath5k_softc *sc)
 {
-	struct ath5k_softc *sc = (void *)data;
-
-	if (test_bit(ATH_STAT_LEDENDBLINK, sc->status))
-		__clear_bit(ATH_STAT_LEDBLINKING, sc->status);
-	else {
-		__set_bit(ATH_STAT_LEDENDBLINK, sc->status);
-		ath5k_hw_set_gpio(sc->ah, sc->led_pin, !sc->led_on);
-		mod_timer(&sc->led_tim, jiffies + sc->led_off);
+	if (test_bit(ATH_STAT_LEDSOFT, sc->status)) {
+		ath5k_hw_set_gpio_output(sc->ah, sc->led_pin);
+		ath5k_led_off(sc);
 	}
 }
 
-/*
- * Blink the LED according to the specified on/off times.
- */
 static void
-ath5k_led_blink(struct ath5k_softc *sc, unsigned int on,
-		unsigned int off)
+ath5k_led_on(struct ath5k_softc *sc)
 {
-	ATH5K_DBG(sc, ATH5K_DEBUG_LED, "on %u off %u\n", on, off);
+	if (!test_bit(ATH_STAT_LEDSOFT, sc->status))
+		return;
 	ath5k_hw_set_gpio(sc->ah, sc->led_pin, sc->led_on);
-	__set_bit(ATH_STAT_LEDBLINKING, sc->status);
-	__clear_bit(ATH_STAT_LEDENDBLINK, sc->status);
-	sc->led_off = off;
-	mod_timer(&sc->led_tim, jiffies + on);
 }
 
 static void
-ath5k_led_event(struct ath5k_softc *sc, int event)
+ath5k_led_off(struct ath5k_softc *sc)
 {
-	if (likely(!test_bit(ATH_STAT_LEDSOFT, sc->status)))
+	if (!test_bit(ATH_STAT_LEDSOFT, sc->status))
 		return;
-	if (unlikely(test_bit(ATH_STAT_LEDBLINKING, sc->status)))
-		return; /* don't interrupt active blink */
-	switch (event) {
-	case ATH_LED_TX:
-		ath5k_led_blink(sc, sc->hwmap[sc->led_txrate].ledon,
-			sc->hwmap[sc->led_txrate].ledoff);
-		break;
-	case ATH_LED_RX:
-		ath5k_led_blink(sc, sc->hwmap[sc->led_rxrate].ledon,
-			sc->hwmap[sc->led_rxrate].ledoff);
-		break;
+	ath5k_hw_set_gpio(sc->ah, sc->led_pin, !sc->led_on);
+}
+
+static void
+ath5k_led_brightness_set(struct led_classdev *led_dev,
+	enum led_brightness brightness)
+{
+	struct ath5k_led *led = container_of(led_dev, struct ath5k_led,
+		led_dev);
+
+	if (brightness == LED_OFF)
+		ath5k_led_off(led->sc);
+	else
+		ath5k_led_on(led->sc);
+}
+
+static int
+ath5k_register_led(struct ath5k_softc *sc, struct ath5k_led *led,
+		   const char *name, char *trigger)
+{
+	int err;
+
+	led->sc = sc;
+	strncpy(led->name, name, sizeof(led->name));
+	led->led_dev.name = led->name;
+	led->led_dev.default_trigger = trigger;
+	led->led_dev.brightness_set = ath5k_led_brightness_set;
+
+	err = led_classdev_register(&sc->pdev->dev, &led->led_dev);
+	if (err)
+	{
+		ATH5K_WARN(sc, "could not register LED %s\n", name);
+		led->sc = NULL;
 	}
+	return err;
+}
+
+static void
+ath5k_unregister_led(struct ath5k_led *led)
+{
+	if (!led->sc)
+		return;
+	led_classdev_unregister(&led->led_dev);
+	ath5k_led_off(led->sc);
+	led->sc = NULL;
 }
 
+static void
+ath5k_unregister_leds(struct ath5k_softc *sc)
+{
+	ath5k_unregister_led(&sc->rx_led);
+	ath5k_unregister_led(&sc->tx_led);
+}
 
 
+static int
+ath5k_init_leds(struct ath5k_softc *sc)
+{
+	int ret = 0;
+	struct ieee80211_hw *hw = sc->hw;
+	struct pci_dev *pdev = sc->pdev;
+	char name[ATH5K_LED_MAX_NAME_LEN + 1];
+
+	sc->led_on = 0;  /* active low */
+
+	/*
+	 * Auto-enable soft led processing for IBM cards and for
+	 * 5211 minipci cards.
+	 */
+	if (pdev->device == PCI_DEVICE_ID_ATHEROS_AR5212_IBM ||
+	    pdev->device == PCI_DEVICE_ID_ATHEROS_AR5211) {
+		__set_bit(ATH_STAT_LEDSOFT, sc->status);
+		sc->led_pin = 0;
+	}
+	/* Enable softled on PIN1 on HP Compaq nc6xx, nc4000 & nx5000 laptops */
+	if (pdev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ) {
+		__set_bit(ATH_STAT_LEDSOFT, sc->status);
+		sc->led_pin = 1;
+	}
+	if (!test_bit(ATH_STAT_LEDSOFT, sc->status))
+		goto out;
+
+	ath5k_led_enable(sc);
+
+	snprintf(name, sizeof(name), "ath5k-%s::rx", wiphy_name(hw->wiphy));
+	ret = ath5k_register_led(sc, &sc->rx_led, name,
+		ieee80211_get_rx_led_name(hw));
+	if (ret)
+		goto out;
+
+	snprintf(name, sizeof(name), "ath5k-%s::tx", wiphy_name(hw->wiphy));
+	ret = ath5k_register_led(sc, &sc->tx_led, name,
+		ieee80211_get_tx_led_name(hw));
+out:
+	return ret;
+}
+
 
 /********************\
 * Mac80211 functions *
@@ -2625,7 +2595,6 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 {
 	struct ath5k_softc *sc = hw->priv;
 	struct ath5k_buf *bf;
-	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	unsigned long flags;
 	int hdrlen;
 	int pad;
@@ -2651,8 +2620,6 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 		memmove(skb->data, skb->data+pad, hdrlen);
 	}
 
-	sc->led_txrate = ieee80211_get_tx_rate(hw, info)->hw_value;
-
 	spin_lock_irqsave(&sc->txbuflock, flags);
 	if (list_empty(&sc->txbuf)) {
 		ATH5K_ERR(sc, "no further txbuf available, dropping packet\n");
diff --git a/drivers/net/wireless/ath5k/base.h b/drivers/net/wireless/ath5k/base.h
index bb4b26d..47f414b 100644
--- a/drivers/net/wireless/ath5k/base.h
+++ b/drivers/net/wireless/ath5k/base.h
@@ -45,6 +45,7 @@
 #include <linux/list.h>
 #include <linux/wireless.h>
 #include <linux/if_ether.h>
+#include <linux/leds.h>
 
 #include "ath5k.h"
 #include "debug.h"
@@ -79,6 +80,19 @@ struct ath5k_txq {
 	bool			setup;
 };
 
+#define ATH5K_LED_MAX_NAME_LEN 31
+
+/*
+ * State for LED triggers
+ */
+struct ath5k_led
+{
+	char name[ATH5K_LED_MAX_NAME_LEN + 1];	/* name of the LED in sysfs */
+	struct ath5k_softc *sc;			/* driver state */
+	struct led_classdev led_dev;		/* led classdev */
+};
+
+
 #if CHAN_DEBUG
 #define ATH_CHAN_MAX	(26+26+26+200+200)
 #else
@@ -118,13 +132,11 @@ struct ath5k_softc {
 	size_t			desc_len;	/* size of TX/RX descriptors */
 	u16			cachelsz;	/* cache line size */
 
-	DECLARE_BITMAP(status, 6);
+	DECLARE_BITMAP(status, 4);
 #define ATH_STAT_INVALID	0		/* disable hardware accesses */
 #define ATH_STAT_MRRETRY	1		/* multi-rate retry support */
 #define ATH_STAT_PROMISC	2
-#define ATH_STAT_LEDBLINKING	3		/* LED blink operation active */
-#define ATH_STAT_LEDENDBLINK	4		/* finish LED blink operation */
-#define ATH_STAT_LEDSOFT	5		/* enable LED gpio status */
+#define ATH_STAT_LEDSOFT	3		/* enable LED gpio status */
 
 	unsigned int		filter_flags;	/* HW flags, AR5K_RX_FILTER_* */
 	unsigned int		curmode;	/* current phy mode */
@@ -132,13 +144,6 @@ struct ath5k_softc {
 
 	struct ieee80211_vif *vif;
 
-	struct {
-		u8	rxflags;	/* radiotap rx flags */
-		u8	txflags;	/* radiotap tx flags */
-		u16	ledon;		/* softled on time */
-		u16	ledoff;		/* softled off time */
-	} hwmap[32];				/* h/w rate ix mappings */
-
 	enum ath5k_int		imask;		/* interrupt mask copy */
 
 	DECLARE_BITMAP(keymap, AR5K_KEYCACHE_SIZE); /* key use bit map */
@@ -148,9 +153,6 @@ struct ath5k_softc {
 	unsigned int		led_pin,	/* GPIO pin for driving LED */
 				led_on,		/* pin setting for LED on */
 				led_off;	/* off time for current blink */
-	struct timer_list	led_tim;	/* led off timer */
-	u8			led_rxrate;	/* current rx rate for LED */
-	u8			led_txrate;	/* current tx rate for LED */
 
 	struct tasklet_struct	restq;		/* reset tasklet */
 
@@ -159,6 +161,7 @@ struct ath5k_softc {
 	spinlock_t		rxbuflock;
 	u32			*rxlink;	/* link ptr in last RX desc */
 	struct tasklet_struct	rxtq;		/* rx intr tasklet */
+	struct ath5k_led	rx_led;		/* rx led */
 
 	struct list_head	txbuf;		/* transmit buffer */
 	spinlock_t		txbuflock;
@@ -167,6 +170,7 @@ struct ath5k_softc {
 
 	struct ath5k_txq	*txq;		/* beacon and tx*/
 	struct tasklet_struct	txtq;		/* tx intr tasklet */
+	struct ath5k_led	tx_led;		/* tx led */
 
 	struct ath5k_buf	*bbuf;		/* beacon buffer */
 	unsigned int		bhalq,		/* SW q for outgoing beacons */
diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c
index 77990b5..c6d12c5 100644
--- a/drivers/net/wireless/ath5k/hw.c
+++ b/drivers/net/wireless/ath5k/hw.c
@@ -31,14 +31,14 @@
 #include "base.h"
 #include "debug.h"
 
-/*Rate tables*/
+/* Rate tables */
 static const struct ath5k_rate_table ath5k_rt_11a = AR5K_RATES_11A;
 static const struct ath5k_rate_table ath5k_rt_11b = AR5K_RATES_11B;
 static const struct ath5k_rate_table ath5k_rt_11g = AR5K_RATES_11G;
 static const struct ath5k_rate_table ath5k_rt_turbo = AR5K_RATES_TURBO;
 static const struct ath5k_rate_table ath5k_rt_xr = AR5K_RATES_XR;
 
-/*Prototypes*/
+/* Prototypes */
 static int ath5k_hw_nic_reset(struct ath5k_hw *, u32);
 static int ath5k_hw_nic_wakeup(struct ath5k_hw *, int, bool);
 static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *, struct ath5k_desc *,
diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c
index 7bb2646..28b6ff3 100644
--- a/drivers/net/wireless/atmel.c
+++ b/drivers/net/wireless/atmel.c
@@ -2310,30 +2310,40 @@ static int atmel_get_scan(struct net_device *dev,
 		iwe.cmd = SIOCGIWAP;
 		iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
 		memcpy(iwe.u.ap_addr.sa_data, priv->BSSinfo[i].BSSID, 6);
-		current_ev = iwe_stream_add_event(current_ev, extra + IW_SCAN_MAX_DATA, &iwe, IW_EV_ADDR_LEN);
+		current_ev = iwe_stream_add_event(info, current_ev,
+						  extra + IW_SCAN_MAX_DATA,
+						  &iwe, IW_EV_ADDR_LEN);
 
 		iwe.u.data.length =  priv->BSSinfo[i].SSIDsize;
 		if (iwe.u.data.length > 32)
 			iwe.u.data.length = 32;
 		iwe.cmd = SIOCGIWESSID;
 		iwe.u.data.flags = 1;
-		current_ev = iwe_stream_add_point(current_ev, extra + IW_SCAN_MAX_DATA, &iwe, priv->BSSinfo[i].SSID);
+		current_ev = iwe_stream_add_point(info, current_ev,
+						  extra + IW_SCAN_MAX_DATA,
+						  &iwe, priv->BSSinfo[i].SSID);
 
 		iwe.cmd = SIOCGIWMODE;
 		iwe.u.mode = priv->BSSinfo[i].BSStype;
-		current_ev = iwe_stream_add_event(current_ev, extra + IW_SCAN_MAX_DATA, &iwe, IW_EV_UINT_LEN);
+		current_ev = iwe_stream_add_event(info, current_ev,
+						  extra + IW_SCAN_MAX_DATA,
+						  &iwe, IW_EV_UINT_LEN);
 
 		iwe.cmd = SIOCGIWFREQ;
 		iwe.u.freq.m = priv->BSSinfo[i].channel;
 		iwe.u.freq.e = 0;
-		current_ev = iwe_stream_add_event(current_ev, extra + IW_SCAN_MAX_DATA, &iwe, IW_EV_FREQ_LEN);
+		current_ev = iwe_stream_add_event(info, current_ev,
+						  extra + IW_SCAN_MAX_DATA,
+						  &iwe, IW_EV_FREQ_LEN);
 
 		/* Add quality statistics */
 		iwe.cmd = IWEVQUAL;
 		iwe.u.qual.level = priv->BSSinfo[i].RSSI;
 		iwe.u.qual.qual  = iwe.u.qual.level;
 		/* iwe.u.qual.noise  = SOMETHING */
-		current_ev = iwe_stream_add_event(current_ev, extra + IW_SCAN_MAX_DATA , &iwe, IW_EV_QUAL_LEN);
+		current_ev = iwe_stream_add_event(info, current_ev,
+						  extra + IW_SCAN_MAX_DATA,
+						  &iwe, IW_EV_QUAL_LEN);
 
 
 		iwe.cmd = SIOCGIWENCODE;
@@ -2342,7 +2352,9 @@ static int atmel_get_scan(struct net_device *dev,
 		else
 			iwe.u.data.flags = IW_ENCODE_DISABLED;
 		iwe.u.data.length = 0;
-		current_ev = iwe_stream_add_point(current_ev, extra + IW_SCAN_MAX_DATA, &iwe, NULL);
+		current_ev = iwe_stream_add_point(info, current_ev,
+						  extra + IW_SCAN_MAX_DATA,
+						  &iwe, NULL);
 	}
 
 	/* Length of data */
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index 532365f..edcdfa3 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -441,6 +441,8 @@ enum {
 #define B43_FWPANIC_DIE			0 /* Firmware died. Don't auto-restart it. */
 #define B43_FWPANIC_RESTART		1 /* Firmware died. Schedule a controller reset. */
 
+/* The firmware register that contains the watchdog counter. */
+#define B43_WATCHDOG_REG		1
 
 /* Device specific rate values.
  * The actual values defined here are (rate_in_mbps * 2).
diff --git a/drivers/net/wireless/b43/debugfs.c b/drivers/net/wireless/b43/debugfs.c
index 210e278..29851bc 100644
--- a/drivers/net/wireless/b43/debugfs.c
+++ b/drivers/net/wireless/b43/debugfs.c
@@ -74,70 +74,327 @@ struct b43_dfs_file * fops_to_dfs_file(struct b43_wldev *dev,
 	} while (0)
 
 
-/* wl->irq_lock is locked */
-static ssize_t tsf_read_file(struct b43_wldev *dev,
-			     char *buf, size_t bufsize)
+/* The biggest address values for SHM access from the debugfs files. */
+#define B43_MAX_SHM_ROUTING	4
+#define B43_MAX_SHM_ADDR	0xFFFF
+
+static ssize_t shm16read__read_file(struct b43_wldev *dev,
+				    char *buf, size_t bufsize)
 {
 	ssize_t count = 0;
-	u64 tsf;
+	unsigned int routing, addr;
+	u16 val;
 
-	b43_tsf_read(dev, &tsf);
-	fappend("0x%08x%08x\n",
-		(unsigned int)((tsf & 0xFFFFFFFF00000000ULL) >> 32),
-		(unsigned int)(tsf & 0xFFFFFFFFULL));
+	routing = dev->dfsentry->shm16read_routing_next;
+	addr = dev->dfsentry->shm16read_addr_next;
+	if ((routing > B43_MAX_SHM_ROUTING) ||
+	    (addr > B43_MAX_SHM_ADDR))
+		return -EDESTADDRREQ;
+
+	val = b43_shm_read16(dev, routing, addr);
+	fappend("0x%04X\n", val);
 
 	return count;
 }
 
-/* wl->irq_lock is locked */
-static int tsf_write_file(struct b43_wldev *dev,
-			  const char *buf, size_t count)
+static int shm16read__write_file(struct b43_wldev *dev,
+				 const char *buf, size_t count)
 {
-	u64 tsf;
+	unsigned int routing, addr;
+	int res;
 
-	if (sscanf(buf, "%llu", (unsigned long long *)(&tsf)) != 1)
+	res = sscanf(buf, "0x%X 0x%X", &routing, &addr);
+	if (res != 2)
 		return -EINVAL;
-	b43_tsf_write(dev, tsf);
+	if (routing > B43_MAX_SHM_ROUTING)
+		return -EADDRNOTAVAIL;
+	if (addr > B43_MAX_SHM_ADDR)
+		return -EADDRNOTAVAIL;
+	if (routing == B43_SHM_SHARED) {
+		if ((addr % 2) != 0)
+			return -EADDRNOTAVAIL;
+	}
+
+	dev->dfsentry->shm16read_routing_next = routing;
+	dev->dfsentry->shm16read_addr_next = addr;
 
 	return 0;
 }
 
-/* wl->irq_lock is locked */
-static ssize_t ucode_regs_read_file(struct b43_wldev *dev,
+static int shm16write__write_file(struct b43_wldev *dev,
+				  const char *buf, size_t count)
+{
+	unsigned int routing, addr, mask, set;
+	u16 val;
+	int res;
+	unsigned long flags;
+
+	res = sscanf(buf, "0x%X 0x%X 0x%X 0x%X",
+		     &routing, &addr, &mask, &set);
+	if (res != 4)
+		return -EINVAL;
+	if (routing > B43_MAX_SHM_ROUTING)
+		return -EADDRNOTAVAIL;
+	if (addr > B43_MAX_SHM_ADDR)
+		return -EADDRNOTAVAIL;
+	if (routing == B43_SHM_SHARED) {
+		if ((addr % 2) != 0)
+			return -EADDRNOTAVAIL;
+	}
+	if ((mask > 0xFFFF) || (set > 0xFFFF))
+		return -E2BIG;
+
+	spin_lock_irqsave(&dev->wl->shm_lock, flags);
+	if (mask == 0)
+		val = 0;
+	else
+		val = __b43_shm_read16(dev, routing, addr);
+	val &= mask;
+	val |= set;
+	__b43_shm_write16(dev, routing, addr, val);
+	spin_unlock_irqrestore(&dev->wl->shm_lock, flags);
+
+	return 0;
+}
+
+static ssize_t shm32read__read_file(struct b43_wldev *dev,
 				    char *buf, size_t bufsize)
 {
 	ssize_t count = 0;
-	int i;
+	unsigned int routing, addr;
+	u32 val;
+
+	routing = dev->dfsentry->shm32read_routing_next;
+	addr = dev->dfsentry->shm32read_addr_next;
+	if ((routing > B43_MAX_SHM_ROUTING) ||
+	    (addr > B43_MAX_SHM_ADDR))
+		return -EDESTADDRREQ;
 
-	for (i = 0; i < 64; i++) {
-		fappend("r%d = 0x%04x\n", i,
-			b43_shm_read16(dev, B43_SHM_SCRATCH, i));
+	val = b43_shm_read32(dev, routing, addr);
+	fappend("0x%08X\n", val);
+
+	return count;
+}
+
+static int shm32read__write_file(struct b43_wldev *dev,
+				 const char *buf, size_t count)
+{
+	unsigned int routing, addr;
+	int res;
+
+	res = sscanf(buf, "0x%X 0x%X", &routing, &addr);
+	if (res != 2)
+		return -EINVAL;
+	if (routing > B43_MAX_SHM_ROUTING)
+		return -EADDRNOTAVAIL;
+	if (addr > B43_MAX_SHM_ADDR)
+		return -EADDRNOTAVAIL;
+	if (routing == B43_SHM_SHARED) {
+		if ((addr % 2) != 0)
+			return -EADDRNOTAVAIL;
+	}
+
+	dev->dfsentry->shm32read_routing_next = routing;
+	dev->dfsentry->shm32read_addr_next = addr;
+
+	return 0;
+}
+
+static int shm32write__write_file(struct b43_wldev *dev,
+				  const char *buf, size_t count)
+{
+	unsigned int routing, addr, mask, set;
+	u32 val;
+	int res;
+	unsigned long flags;
+
+	res = sscanf(buf, "0x%X 0x%X 0x%X 0x%X",
+		     &routing, &addr, &mask, &set);
+	if (res != 4)
+		return -EINVAL;
+	if (routing > B43_MAX_SHM_ROUTING)
+		return -EADDRNOTAVAIL;
+	if (addr > B43_MAX_SHM_ADDR)
+		return -EADDRNOTAVAIL;
+	if (routing == B43_SHM_SHARED) {
+		if ((addr % 2) != 0)
+			return -EADDRNOTAVAIL;
 	}
+	if ((mask > 0xFFFFFFFF) || (set > 0xFFFFFFFF))
+		return -E2BIG;
+
+	spin_lock_irqsave(&dev->wl->shm_lock, flags);
+	if (mask == 0)
+		val = 0;
+	else
+		val = __b43_shm_read32(dev, routing, addr);
+	val &= mask;
+	val |= set;
+	__b43_shm_write32(dev, routing, addr, val);
+	spin_unlock_irqrestore(&dev->wl->shm_lock, flags);
+
+	return 0;
+}
+
+/* The biggest MMIO address that we allow access to from the debugfs files. */
+#define B43_MAX_MMIO_ACCESS	(0xF00 - 1)
+
+static ssize_t mmio16read__read_file(struct b43_wldev *dev,
+				     char *buf, size_t bufsize)
+{
+	ssize_t count = 0;
+	unsigned int addr;
+	u16 val;
+
+	addr = dev->dfsentry->mmio16read_next;
+	if (addr > B43_MAX_MMIO_ACCESS)
+		return -EDESTADDRREQ;
+
+	val = b43_read16(dev, addr);
+	fappend("0x%04X\n", val);
+
+	return count;
+}
+
+static int mmio16read__write_file(struct b43_wldev *dev,
+				  const char *buf, size_t count)
+{
+	unsigned int addr;
+	int res;
+
+	res = sscanf(buf, "0x%X", &addr);
+	if (res != 1)
+		return -EINVAL;
+	if (addr > B43_MAX_MMIO_ACCESS)
+		return -EADDRNOTAVAIL;
+	if ((addr % 2) != 0)
+		return -EINVAL;
+
+	dev->dfsentry->mmio16read_next = addr;
+
+	return 0;
+}
+
+static int mmio16write__write_file(struct b43_wldev *dev,
+				   const char *buf, size_t count)
+{
+	unsigned int addr, mask, set;
+	int res;
+	u16 val;
+
+	res = sscanf(buf, "0x%X 0x%X 0x%X", &addr, &mask, &set);
+	if (res != 3)
+		return -EINVAL;
+	if (addr > B43_MAX_MMIO_ACCESS)
+		return -EADDRNOTAVAIL;
+	if ((mask > 0xFFFF) || (set > 0xFFFF))
+		return -E2BIG;
+	if ((addr % 2) != 0)
+		return -EINVAL;
+
+	if (mask == 0)
+		val = 0;
+	else
+		val = b43_read16(dev, addr);
+	val &= mask;
+	val |= set;
+	b43_write16(dev, addr, val);
+
+	return 0;
+}
+
+static ssize_t mmio32read__read_file(struct b43_wldev *dev,
+				     char *buf, size_t bufsize)
+{
+	ssize_t count = 0;
+	unsigned int addr;
+	u32 val;
+
+	addr = dev->dfsentry->mmio32read_next;
+	if (addr > B43_MAX_MMIO_ACCESS)
+		return -EDESTADDRREQ;
+
+	val = b43_read32(dev, addr);
+	fappend("0x%08X\n", val);
 
 	return count;
 }
 
+static int mmio32read__write_file(struct b43_wldev *dev,
+				  const char *buf, size_t count)
+{
+	unsigned int addr;
+	int res;
+
+	res = sscanf(buf, "0x%X", &addr);
+	if (res != 1)
+		return -EINVAL;
+	if (addr > B43_MAX_MMIO_ACCESS)
+		return -EADDRNOTAVAIL;
+	if ((addr % 4) != 0)
+		return -EINVAL;
+
+	dev->dfsentry->mmio32read_next = addr;
+
+	return 0;
+}
+
+static int mmio32write__write_file(struct b43_wldev *dev,
+				   const char *buf, size_t count)
+{
+	unsigned int addr, mask, set;
+	int res;
+	u32 val;
+
+	res = sscanf(buf, "0x%X 0x%X 0x%X", &addr, &mask, &set);
+	if (res != 3)
+		return -EINVAL;
+	if (addr > B43_MAX_MMIO_ACCESS)
+		return -EADDRNOTAVAIL;
+	if ((mask > 0xFFFFFFFF) || (set > 0xFFFFFFFF))
+		return -E2BIG;
+	if ((addr % 4) != 0)
+		return -EINVAL;
+
+	if (mask == 0)
+		val = 0;
+	else
+		val = b43_read32(dev, addr);
+	val &= mask;
+	val |= set;
+	b43_write32(dev, addr, val);
+
+	return 0;
+}
+
 /* wl->irq_lock is locked */
-static ssize_t shm_read_file(struct b43_wldev *dev,
+static ssize_t tsf_read_file(struct b43_wldev *dev,
 			     char *buf, size_t bufsize)
 {
 	ssize_t count = 0;
-	int i;
-	u16 tmp;
-	__le16 *le16buf = (__le16 *)buf;
+	u64 tsf;
 
-	for (i = 0; i < 0x1000; i++) {
-		if (bufsize < sizeof(tmp))
-			break;
-		tmp = b43_shm_read16(dev, B43_SHM_SHARED, 2 * i);
-		le16buf[i] = cpu_to_le16(tmp);
-		count += sizeof(tmp);
-		bufsize -= sizeof(tmp);
-	}
+	b43_tsf_read(dev, &tsf);
+	fappend("0x%08x%08x\n",
+		(unsigned int)((tsf & 0xFFFFFFFF00000000ULL) >> 32),
+		(unsigned int)(tsf & 0xFFFFFFFFULL));
 
 	return count;
 }
 
+/* wl->irq_lock is locked */
+static int tsf_write_file(struct b43_wldev *dev,
+			  const char *buf, size_t count)
+{
+	u64 tsf;
+
+	if (sscanf(buf, "%llu", (unsigned long long *)(&tsf)) != 1)
+		return -EINVAL;
+	b43_tsf_write(dev, tsf);
+
+	return 0;
+}
+
 static ssize_t txstat_read_file(struct b43_wldev *dev,
 				char *buf, size_t bufsize)
 {
@@ -496,9 +753,15 @@ out_unlock:
 		.take_irqlock	= _take_irqlock,		\
 	}
 
+B43_DEBUGFS_FOPS(shm16read, shm16read__read_file, shm16read__write_file, 1);
+B43_DEBUGFS_FOPS(shm16write, NULL, shm16write__write_file, 1);
+B43_DEBUGFS_FOPS(shm32read, shm32read__read_file, shm32read__write_file, 1);
+B43_DEBUGFS_FOPS(shm32write, NULL, shm32write__write_file, 1);
+B43_DEBUGFS_FOPS(mmio16read, mmio16read__read_file, mmio16read__write_file, 1);
+B43_DEBUGFS_FOPS(mmio16write, NULL, mmio16write__write_file, 1);
+B43_DEBUGFS_FOPS(mmio32read, mmio32read__read_file, mmio32read__write_file, 1);
+B43_DEBUGFS_FOPS(mmio32write, NULL, mmio32write__write_file, 1);
 B43_DEBUGFS_FOPS(tsf, tsf_read_file, tsf_write_file, 1);
-B43_DEBUGFS_FOPS(ucode_regs, ucode_regs_read_file, NULL, 1);
-B43_DEBUGFS_FOPS(shm, shm_read_file, NULL, 1);
 B43_DEBUGFS_FOPS(txstat, txstat_read_file, NULL, 0);
 B43_DEBUGFS_FOPS(txpower_g, txpower_g_read_file, txpower_g_write_file, 0);
 B43_DEBUGFS_FOPS(restart, NULL, restart_write_file, 1);
@@ -538,6 +801,7 @@ static void b43_add_dynamic_debug(struct b43_wldev *dev)
 	add_dyn_dbg("debug_pwork_fast", B43_DBG_PWORK_FAST, 0);
 	add_dyn_dbg("debug_pwork_stop", B43_DBG_PWORK_STOP, 0);
 	add_dyn_dbg("debug_lo", B43_DBG_LO, 0);
+	add_dyn_dbg("debug_firmware", B43_DBG_FIRMWARE, 0);
 
 #undef add_dyn_dbg
 }
@@ -584,6 +848,13 @@ void b43_debugfs_add_device(struct b43_wldev *dev)
 		return;
 	}
 
+	e->mmio16read_next = 0xFFFF; /* invalid address */
+	e->mmio32read_next = 0xFFFF; /* invalid address */
+	e->shm16read_routing_next = 0xFFFFFFFF; /* invalid routing */
+	e->shm16read_addr_next = 0xFFFFFFFF; /* invalid address */
+	e->shm32read_routing_next = 0xFFFFFFFF; /* invalid routing */
+	e->shm32read_addr_next = 0xFFFFFFFF; /* invalid address */
+
 #define ADD_FILE(name, mode)	\
 	do {							\
 		struct dentry *d;				\
@@ -596,9 +867,15 @@ void b43_debugfs_add_device(struct b43_wldev *dev)
 	} while (0)
 
 
+	ADD_FILE(shm16read, 0600);
+	ADD_FILE(shm16write, 0200);
+	ADD_FILE(shm32read, 0600);
+	ADD_FILE(shm32write, 0200);
+	ADD_FILE(mmio16read, 0600);
+	ADD_FILE(mmio16write, 0200);
+	ADD_FILE(mmio32read, 0600);
+	ADD_FILE(mmio32write, 0200);
 	ADD_FILE(tsf, 0600);
-	ADD_FILE(ucode_regs, 0400);
-	ADD_FILE(shm, 0400);
 	ADD_FILE(txstat, 0400);
 	ADD_FILE(txpower_g, 0600);
 	ADD_FILE(restart, 0200);
@@ -620,9 +897,15 @@ void b43_debugfs_remove_device(struct b43_wldev *dev)
 		return;
 	b43_remove_dynamic_debug(dev);
 
+	debugfs_remove(e->file_shm16read.dentry);
+	debugfs_remove(e->file_shm16write.dentry);
+	debugfs_remove(e->file_shm32read.dentry);
+	debugfs_remove(e->file_shm32write.dentry);
+	debugfs_remove(e->file_mmio16read.dentry);
+	debugfs_remove(e->file_mmio16write.dentry);
+	debugfs_remove(e->file_mmio32read.dentry);
+	debugfs_remove(e->file_mmio32write.dentry);
 	debugfs_remove(e->file_tsf.dentry);
-	debugfs_remove(e->file_ucode_regs.dentry);
-	debugfs_remove(e->file_shm.dentry);
 	debugfs_remove(e->file_txstat.dentry);
 	debugfs_remove(e->file_txpower_g.dentry);
 	debugfs_remove(e->file_restart.dentry);
diff --git a/drivers/net/wireless/b43/debugfs.h b/drivers/net/wireless/b43/debugfs.h
index c75cff4..22ffd02 100644
--- a/drivers/net/wireless/b43/debugfs.h
+++ b/drivers/net/wireless/b43/debugfs.h
@@ -11,6 +11,7 @@ enum b43_dyndbg {		/* Dynamic debugging features */
 	B43_DBG_PWORK_FAST,
 	B43_DBG_PWORK_STOP,
 	B43_DBG_LO,
+	B43_DBG_FIRMWARE,
 	__B43_NR_DYNDBG,
 };
 
@@ -36,9 +37,15 @@ struct b43_dfsentry {
 	struct b43_wldev *dev;
 	struct dentry *subdir;
 
+	struct b43_dfs_file file_shm16read;
+	struct b43_dfs_file file_shm16write;
+	struct b43_dfs_file file_shm32read;
+	struct b43_dfs_file file_shm32write;
+	struct b43_dfs_file file_mmio16read;
+	struct b43_dfs_file file_mmio16write;
+	struct b43_dfs_file file_mmio32read;
+	struct b43_dfs_file file_mmio32write;
 	struct b43_dfs_file file_tsf;
-	struct b43_dfs_file file_ucode_regs;
-	struct b43_dfs_file file_shm;
 	struct b43_dfs_file file_txstat;
 	struct b43_dfs_file file_txpower_g;
 	struct b43_dfs_file file_restart;
@@ -46,6 +53,18 @@ struct b43_dfsentry {
 
 	struct b43_txstatus_log txstatlog;
 
+	/* The cached address for the next mmio16read file read */
+	u16 mmio16read_next;
+	/* The cached address for the next mmio32read file read */
+	u16 mmio32read_next;
+
+	/* The cached address for the next shm16read file read */
+	u32 shm16read_routing_next;
+	u32 shm16read_addr_next;
+	/* The cached address for the next shm32read file read */
+	u32 shm32read_routing_next;
+	u32 shm32read_addr_next;
+
 	/* Enabled/Disabled list for the dynamic debugging features. */
 	u32 dyn_debug[__B43_NR_DYNDBG];
 	/* Dentries for the dynamic debugging entries. */
diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c
index 8a09a1d..098f886 100644
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -328,11 +328,11 @@ static inline
 	dma_addr_t dmaaddr;
 
 	if (tx) {
-		dmaaddr = dma_map_single(ring->dev->dev->dma_dev,
-					 buf, len, DMA_TO_DEVICE);
+		dmaaddr = ssb_dma_map_single(ring->dev->dev,
+					     buf, len, DMA_TO_DEVICE);
 	} else {
-		dmaaddr = dma_map_single(ring->dev->dev->dma_dev,
-					 buf, len, DMA_FROM_DEVICE);
+		dmaaddr = ssb_dma_map_single(ring->dev->dev,
+					     buf, len, DMA_FROM_DEVICE);
 	}
 
 	return dmaaddr;
@@ -343,11 +343,11 @@ static inline
 			  dma_addr_t addr, size_t len, int tx)
 {
 	if (tx) {
-		dma_unmap_single(ring->dev->dev->dma_dev,
-				 addr, len, DMA_TO_DEVICE);
+		ssb_dma_unmap_single(ring->dev->dev,
+				     addr, len, DMA_TO_DEVICE);
 	} else {
-		dma_unmap_single(ring->dev->dev->dma_dev,
-				 addr, len, DMA_FROM_DEVICE);
+		ssb_dma_unmap_single(ring->dev->dev,
+				     addr, len, DMA_FROM_DEVICE);
 	}
 }
 
@@ -356,8 +356,8 @@ static inline
 				 dma_addr_t addr, size_t len)
 {
 	B43_WARN_ON(ring->tx);
-	dma_sync_single_for_cpu(ring->dev->dev->dma_dev,
-				addr, len, DMA_FROM_DEVICE);
+	ssb_dma_sync_single_for_cpu(ring->dev->dev,
+				    addr, len, DMA_FROM_DEVICE);
 }
 
 static inline
@@ -365,8 +365,8 @@ static inline
 				    dma_addr_t addr, size_t len)
 {
 	B43_WARN_ON(ring->tx);
-	dma_sync_single_for_device(ring->dev->dev->dma_dev,
-				   addr, len, DMA_FROM_DEVICE);
+	ssb_dma_sync_single_for_device(ring->dev->dev,
+				       addr, len, DMA_FROM_DEVICE);
 }
 
 static inline
@@ -381,7 +381,6 @@ static inline
 
 static int alloc_ringmemory(struct b43_dmaring *ring)
 {
-	struct device *dma_dev = ring->dev->dev->dma_dev;
 	gfp_t flags = GFP_KERNEL;
 
 	/* The specs call for 4K buffers for 30- and 32-bit DMA with 4K
@@ -392,11 +391,14 @@ static int alloc_ringmemory(struct b43_dmaring *ring)
 	 * For unknown reasons - possibly a hardware error - the BCM4311 rev
 	 * 02, which uses 64-bit DMA, needs the ring buffer in very low memory,
 	 * which accounts for the GFP_DMA flag below.
+	 *
+	 * The flags here must match the flags in free_ringmemory below!
 	 */
 	if (ring->type == B43_DMA_64BIT)
 		flags |= GFP_DMA;
-	ring->descbase = dma_alloc_coherent(dma_dev, B43_DMA_RINGMEMSIZE,
-					    &(ring->dmabase), flags);
+	ring->descbase = ssb_dma_alloc_consistent(ring->dev->dev,
+						  B43_DMA_RINGMEMSIZE,
+						  &(ring->dmabase), flags);
 	if (!ring->descbase) {
 		b43err(ring->dev->wl, "DMA ringmemory allocation failed\n");
 		return -ENOMEM;
@@ -408,10 +410,13 @@ static int alloc_ringmemory(struct b43_dmaring *ring)
 
 static void free_ringmemory(struct b43_dmaring *ring)
 {
-	struct device *dma_dev = ring->dev->dev->dma_dev;
+	gfp_t flags = GFP_KERNEL;
+
+	if (ring->type == B43_DMA_64BIT)
+		flags |= GFP_DMA;
 
-	dma_free_coherent(dma_dev, B43_DMA_RINGMEMSIZE,
-			  ring->descbase, ring->dmabase);
+	ssb_dma_free_consistent(ring->dev->dev, B43_DMA_RINGMEMSIZE,
+				ring->descbase, ring->dmabase, flags);
 }
 
 /* Reset the RX DMA channel */
@@ -518,7 +523,7 @@ static bool b43_dma_mapping_error(struct b43_dmaring *ring,
 				  dma_addr_t addr,
 				  size_t buffersize, bool dma_to_device)
 {
-	if (unlikely(dma_mapping_error(addr)))
+	if (unlikely(ssb_dma_mapping_error(ring->dev->dev, addr)))
 		return 1;
 
 	switch (ring->type) {
@@ -844,10 +849,10 @@ struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev,
 			goto err_kfree_meta;
 
 		/* test for ability to dma to txhdr_cache */
-		dma_test = dma_map_single(dev->dev->dma_dev,
-					  ring->txhdr_cache,
-					  b43_txhdr_size(dev),
-					  DMA_TO_DEVICE);
+		dma_test = ssb_dma_map_single(dev->dev,
+					      ring->txhdr_cache,
+					      b43_txhdr_size(dev),
+					      DMA_TO_DEVICE);
 
 		if (b43_dma_mapping_error(ring, dma_test,
 					  b43_txhdr_size(dev), 1)) {
@@ -859,10 +864,10 @@ struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev,
 			if (!ring->txhdr_cache)
 				goto err_kfree_meta;
 
-			dma_test = dma_map_single(dev->dev->dma_dev,
-						  ring->txhdr_cache,
-						  b43_txhdr_size(dev),
-						  DMA_TO_DEVICE);
+			dma_test = ssb_dma_map_single(dev->dev,
+						      ring->txhdr_cache,
+						      b43_txhdr_size(dev),
+						      DMA_TO_DEVICE);
 
 			if (b43_dma_mapping_error(ring, dma_test,
 						  b43_txhdr_size(dev), 1)) {
@@ -873,9 +878,9 @@ struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev,
 			}
 		}
 
-		dma_unmap_single(dev->dev->dma_dev,
-				 dma_test, b43_txhdr_size(dev),
-				 DMA_TO_DEVICE);
+		ssb_dma_unmap_single(dev->dev,
+				     dma_test, b43_txhdr_size(dev),
+				     DMA_TO_DEVICE);
 	}
 
 	err = alloc_ringmemory(ring);
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 704dd35..9d2eb27 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -373,13 +373,10 @@ static inline void b43_shm_control_word(struct b43_wldev *dev,
 	b43_write32(dev, B43_MMIO_SHM_CONTROL, control);
 }
 
-u32 b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset)
+u32 __b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset)
 {
-	struct b43_wl *wl = dev->wl;
-	unsigned long flags;
 	u32 ret;
 
-	spin_lock_irqsave(&wl->shm_lock, flags);
 	if (routing == B43_SHM_SHARED) {
 		B43_WARN_ON(offset & 0x0001);
 		if (offset & 0x0003) {
@@ -397,18 +394,26 @@ u32 b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset)
 	b43_shm_control_word(dev, routing, offset);
 	ret = b43_read32(dev, B43_MMIO_SHM_DATA);
 out:
-	spin_unlock_irqrestore(&wl->shm_lock, flags);
-
 	return ret;
 }
 
-u16 b43_shm_read16(struct b43_wldev * dev, u16 routing, u16 offset)
+u32 b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset)
 {
 	struct b43_wl *wl = dev->wl;
 	unsigned long flags;
-	u16 ret;
+	u32 ret;
 
 	spin_lock_irqsave(&wl->shm_lock, flags);
+	ret = __b43_shm_read32(dev, routing, offset);
+	spin_unlock_irqrestore(&wl->shm_lock, flags);
+
+	return ret;
+}
+
+u16 __b43_shm_read16(struct b43_wldev *dev, u16 routing, u16 offset)
+{
+	u16 ret;
+
 	if (routing == B43_SHM_SHARED) {
 		B43_WARN_ON(offset & 0x0001);
 		if (offset & 0x0003) {
@@ -423,17 +428,24 @@ u16 b43_shm_read16(struct b43_wldev * dev, u16 routing, u16 offset)
 	b43_shm_control_word(dev, routing, offset);
 	ret = b43_read16(dev, B43_MMIO_SHM_DATA);
 out:
-	spin_unlock_irqrestore(&wl->shm_lock, flags);
-
 	return ret;
 }
 
-void b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value)
+u16 b43_shm_read16(struct b43_wldev *dev, u16 routing, u16 offset)
 {
 	struct b43_wl *wl = dev->wl;
 	unsigned long flags;
+	u16 ret;
 
 	spin_lock_irqsave(&wl->shm_lock, flags);
+	ret = __b43_shm_read16(dev, routing, offset);
+	spin_unlock_irqrestore(&wl->shm_lock, flags);
+
+	return ret;
+}
+
+void __b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value)
+{
 	if (routing == B43_SHM_SHARED) {
 		B43_WARN_ON(offset & 0x0001);
 		if (offset & 0x0003) {
@@ -443,35 +455,47 @@ void b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value)
 				    (value >> 16) & 0xffff);
 			b43_shm_control_word(dev, routing, (offset >> 2) + 1);
 			b43_write16(dev, B43_MMIO_SHM_DATA, value & 0xffff);
-			goto out;
+			return;
 		}
 		offset >>= 2;
 	}
 	b43_shm_control_word(dev, routing, offset);
 	b43_write32(dev, B43_MMIO_SHM_DATA, value);
-out:
-	spin_unlock_irqrestore(&wl->shm_lock, flags);
 }
 
-void b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value)
+void b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value)
 {
 	struct b43_wl *wl = dev->wl;
 	unsigned long flags;
 
 	spin_lock_irqsave(&wl->shm_lock, flags);
+	__b43_shm_write32(dev, routing, offset, value);
+	spin_unlock_irqrestore(&wl->shm_lock, flags);
+}
+
+void __b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value)
+{
 	if (routing == B43_SHM_SHARED) {
 		B43_WARN_ON(offset & 0x0001);
 		if (offset & 0x0003) {
 			/* Unaligned access */
 			b43_shm_control_word(dev, routing, offset >> 2);
 			b43_write16(dev, B43_MMIO_SHM_DATA_UNALIGNED, value);
-			goto out;
+			return;
 		}
 		offset >>= 2;
 	}
 	b43_shm_control_word(dev, routing, offset);
 	b43_write16(dev, B43_MMIO_SHM_DATA, value);
-out:
+}
+
+void b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value)
+{
+	struct b43_wl *wl = dev->wl;
+	unsigned long flags;
+
+	spin_lock_irqsave(&wl->shm_lock, flags);
+	__b43_shm_write16(dev, routing, offset, value);
 	spin_unlock_irqrestore(&wl->shm_lock, flags);
 }
 
@@ -2463,6 +2487,19 @@ static void b43_gpio_cleanup(struct b43_wldev *dev)
 /* http://bcm-specs.sipsolutions.net/EnableMac */
 void b43_mac_enable(struct b43_wldev *dev)
 {
+	if (b43_debug(dev, B43_DBG_FIRMWARE)) {
+		u16 fwstate;
+
+		fwstate = b43_shm_read16(dev, B43_SHM_SHARED,
+					 B43_SHM_SH_UCODESTAT);
+		if ((fwstate != B43_SHM_SH_UCODESTAT_SUSP) &&
+		    (fwstate != B43_SHM_SH_UCODESTAT_SLEEP)) {
+			b43err(dev->wl, "b43_mac_enable(): The firmware "
+			       "should be suspended, but current state is %u\n",
+			       fwstate);
+		}
+	}
+
 	dev->mac_suspended--;
 	B43_WARN_ON(dev->mac_suspended < 0);
 	if (dev->mac_suspended == 0) {
@@ -2783,6 +2820,21 @@ static void b43_periodic_every30sec(struct b43_wldev *dev)
 static void b43_periodic_every15sec(struct b43_wldev *dev)
 {
 	struct b43_phy *phy = &dev->phy;
+	u16 wdr;
+
+	if (dev->fw.opensource) {
+		/* Check if the firmware is still alive.
+		 * It will reset the watchdog counter to 0 in its idle loop. */
+		wdr = b43_shm_read16(dev, B43_SHM_SCRATCH, B43_WATCHDOG_REG);
+		if (unlikely(wdr)) {
+			b43err(dev->wl, "Firmware watchdog: The firmware died!\n");
+			b43_controller_restart(dev, "Firmware watchdog");
+			return;
+		} else {
+			b43_shm_write16(dev, B43_SHM_SCRATCH,
+					B43_WATCHDOG_REG, 1);
+		}
+	}
 
 	if (phy->type == B43_PHYTYPE_G) {
 		//TODO: update_aci_moving_average
diff --git a/drivers/net/wireless/b43/main.h b/drivers/net/wireless/b43/main.h
index dad23c4..f871a25 100644
--- a/drivers/net/wireless/b43/main.h
+++ b/drivers/net/wireless/b43/main.h
@@ -95,9 +95,13 @@ void b43_tsf_read(struct b43_wldev *dev, u64 * tsf);
 void b43_tsf_write(struct b43_wldev *dev, u64 tsf);
 
 u32 b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset);
+u32 __b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset);
 u16 b43_shm_read16(struct b43_wldev *dev, u16 routing, u16 offset);
+u16 __b43_shm_read16(struct b43_wldev *dev, u16 routing, u16 offset);
 void b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value);
+void __b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value);
 void b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value);
+void __b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value);
 
 u64 b43_hf_read(struct b43_wldev *dev);
 void b43_hf_write(struct b43_wldev *dev, u64 value);
diff --git a/drivers/net/wireless/b43/pio.c b/drivers/net/wireless/b43/pio.c
index 8b1555d..40159126 100644
--- a/drivers/net/wireless/b43/pio.c
+++ b/drivers/net/wireless/b43/pio.c
@@ -586,7 +586,7 @@ void b43_pio_handle_txstatus(struct b43_wldev *dev,
 
 	spin_lock(&q->lock); /* IRQs are already disabled. */
 
-	info = (void *)pack->skb;
+	info = IEEE80211_SKB_CB(pack->skb);
 	memset(&info->status, 0, sizeof(info->status));
 
 	b43_fill_txstatus_report(info, status);
diff --git a/drivers/net/wireless/b43/rfkill.c b/drivers/net/wireless/b43/rfkill.c
index 11f53cb..4cca203 100644
--- a/drivers/net/wireless/b43/rfkill.c
+++ b/drivers/net/wireless/b43/rfkill.c
@@ -88,7 +88,7 @@ static int b43_rfkill_soft_toggle(void *data, enum rfkill_state state)
 		goto out_unlock;
 	err = 0;
 	switch (state) {
-	case RFKILL_STATE_ON:
+	case RFKILL_STATE_UNBLOCKED:
 		if (!dev->radio_hw_enable) {
 			/* No luck. We can't toggle the hardware RF-kill
 			 * button from software. */
@@ -98,10 +98,13 @@ static int b43_rfkill_soft_toggle(void *data, enum rfkill_state state)
 		if (!dev->phy.radio_on)
 			b43_radio_turn_on(dev);
 		break;
-	case RFKILL_STATE_OFF:
+	case RFKILL_STATE_SOFT_BLOCKED:
 		if (dev->phy.radio_on)
 			b43_radio_turn_off(dev, 0);
 		break;
+	default:
+		b43warn(wl, "Received unexpected rfkill state %d.\n", state);
+		break;
 	}
 out_unlock:
 	mutex_unlock(&wl->mutex);
diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c
index f9e1cff..bf6f6c1 100644
--- a/drivers/net/wireless/b43/xmit.c
+++ b/drivers/net/wireless/b43/xmit.c
@@ -193,7 +193,7 @@ int b43_generate_txhdr(struct b43_wldev *dev,
 	const struct ieee80211_hdr *wlhdr =
 	    (const struct ieee80211_hdr *)fragment_data;
 	int use_encryption = (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT));
-	u16 fctl = le16_to_cpu(wlhdr->frame_control);
+	__le16 fctl = wlhdr->frame_control;
 	struct ieee80211_rate *fbrate;
 	u8 rate, rate_fb;
 	int rate_ofdm, rate_fb_ofdm;
@@ -259,7 +259,7 @@ int b43_generate_txhdr(struct b43_wldev *dev,
 			   B43_TXH_MAC_KEYIDX;
 		mac_ctl |= (key->algorithm << B43_TXH_MAC_KEYALG_SHIFT) &
 			   B43_TXH_MAC_KEYALG;
-		wlhdr_len = ieee80211_get_hdrlen(fctl);
+		wlhdr_len = ieee80211_hdrlen(fctl);
 		iv_len = min((size_t) info->control.iv_len,
 			     ARRAY_SIZE(txhdr->iv));
 		memcpy(txhdr->iv, ((u8 *) wlhdr) + wlhdr_len, iv_len);
@@ -317,8 +317,7 @@ int b43_generate_txhdr(struct b43_wldev *dev,
 	/* MAC control */
 	if (!(info->flags & IEEE80211_TX_CTL_NO_ACK))
 		mac_ctl |= B43_TXH_MAC_ACK;
-	if (!(((fctl & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_CTL) &&
-	      ((fctl & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_PSPOLL)))
+	if (!ieee80211_is_pspoll(fctl))
 		mac_ctl |= B43_TXH_MAC_HWSEQ;
 	if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
 		mac_ctl |= B43_TXH_MAC_STMSDU;
@@ -509,7 +508,7 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr)
 	struct b43_plcp_hdr6 *plcp;
 	struct ieee80211_hdr *wlhdr;
 	const struct b43_rxhdr_fw4 *rxhdr = _rxhdr;
-	u16 fctl;
+	__le16 fctl;
 	u16 phystat0, phystat3, chanstat, mactime;
 	u32 macstat;
 	u16 chanid;
@@ -549,7 +548,7 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr)
 		goto drop;
 	}
 	wlhdr = (struct ieee80211_hdr *)(skb->data);
-	fctl = le16_to_cpu(wlhdr->frame_control);
+	fctl = wlhdr->frame_control;
 
 	if (macstat & B43_RX_MAC_DEC) {
 		unsigned int keyidx;
@@ -564,7 +563,7 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr)
 		B43_WARN_ON(keyidx >= dev->max_nr_keys);
 
 		if (dev->key[keyidx].algorithm != B43_SEC_ALGO_NONE) {
-			wlhdr_len = ieee80211_get_hdrlen(fctl);
+			wlhdr_len = ieee80211_hdrlen(fctl);
 			if (unlikely(skb->len < (wlhdr_len + 3))) {
 				b43dbg(dev->wl,
 				       "RX: Packet size underrun (3)\n");
@@ -604,9 +603,7 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr)
 	 * of timestamp, i.e. about 65 milliseconds after the PHY received
 	 * the first symbol.
 	 */
-	if (((fctl & (IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE))
-	    == (IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_BEACON)) ||
-	    dev->wl->radiotap_enabled) {
+	if (ieee80211_is_beacon(fctl) || dev->wl->radiotap_enabled) {
 		u16 low_mactime_now;
 
 		b43_tsf_read(dev, &status.mactime);
diff --git a/drivers/net/wireless/b43legacy/dma.c b/drivers/net/wireless/b43legacy/dma.c
index 203b0f42..eb0243a 100644
--- a/drivers/net/wireless/b43legacy/dma.c
+++ b/drivers/net/wireless/b43legacy/dma.c
@@ -393,13 +393,13 @@ dma_addr_t map_descbuffer(struct b43legacy_dmaring *ring,
 	dma_addr_t dmaaddr;
 
 	if (tx)
-		dmaaddr = dma_map_single(ring->dev->dev->dma_dev,
-					 buf, len,
-					 DMA_TO_DEVICE);
+		dmaaddr = ssb_dma_map_single(ring->dev->dev,
+					     buf, len,
+					     DMA_TO_DEVICE);
 	else
-		dmaaddr = dma_map_single(ring->dev->dev->dma_dev,
-					 buf, len,
-					 DMA_FROM_DEVICE);
+		dmaaddr = ssb_dma_map_single(ring->dev->dev,
+					     buf, len,
+					     DMA_FROM_DEVICE);
 
 	return dmaaddr;
 }
@@ -411,13 +411,13 @@ void unmap_descbuffer(struct b43legacy_dmaring *ring,
 		      int tx)
 {
 	if (tx)
-		dma_unmap_single(ring->dev->dev->dma_dev,
-				 addr, len,
-				 DMA_TO_DEVICE);
+		ssb_dma_unmap_single(ring->dev->dev,
+				     addr, len,
+				     DMA_TO_DEVICE);
 	else
-		dma_unmap_single(ring->dev->dev->dma_dev,
-				 addr, len,
-				 DMA_FROM_DEVICE);
+		ssb_dma_unmap_single(ring->dev->dev,
+				     addr, len,
+				     DMA_FROM_DEVICE);
 }
 
 static inline
@@ -427,8 +427,8 @@ void sync_descbuffer_for_cpu(struct b43legacy_dmaring *ring,
 {
 	B43legacy_WARN_ON(ring->tx);
 
-	dma_sync_single_for_cpu(ring->dev->dev->dma_dev,
-				addr, len, DMA_FROM_DEVICE);
+	ssb_dma_sync_single_for_cpu(ring->dev->dev,
+				    addr, len, DMA_FROM_DEVICE);
 }
 
 static inline
@@ -438,8 +438,8 @@ void sync_descbuffer_for_device(struct b43legacy_dmaring *ring,
 {
 	B43legacy_WARN_ON(ring->tx);
 
-	dma_sync_single_for_device(ring->dev->dev->dma_dev,
-				   addr, len, DMA_FROM_DEVICE);
+	ssb_dma_sync_single_for_device(ring->dev->dev,
+				       addr, len, DMA_FROM_DEVICE);
 }
 
 static inline
@@ -458,10 +458,11 @@ void free_descriptor_buffer(struct b43legacy_dmaring *ring,
 
 static int alloc_ringmemory(struct b43legacy_dmaring *ring)
 {
-	struct device *dma_dev = ring->dev->dev->dma_dev;
-
-	ring->descbase = dma_alloc_coherent(dma_dev, B43legacy_DMA_RINGMEMSIZE,
-					    &(ring->dmabase), GFP_KERNEL);
+	/* GFP flags must match the flags in free_ringmemory()! */
+	ring->descbase = ssb_dma_alloc_consistent(ring->dev->dev,
+						  B43legacy_DMA_RINGMEMSIZE,
+						  &(ring->dmabase),
+						  GFP_KERNEL);
 	if (!ring->descbase) {
 		b43legacyerr(ring->dev->wl, "DMA ringmemory allocation"
 			     " failed\n");
@@ -474,10 +475,8 @@ static int alloc_ringmemory(struct b43legacy_dmaring *ring)
 
 static void free_ringmemory(struct b43legacy_dmaring *ring)
 {
-	struct device *dma_dev = ring->dev->dev->dma_dev;
-
-	dma_free_coherent(dma_dev, B43legacy_DMA_RINGMEMSIZE,
-			  ring->descbase, ring->dmabase);
+	ssb_dma_free_consistent(ring->dev->dev, B43legacy_DMA_RINGMEMSIZE,
+				ring->descbase, ring->dmabase, GFP_KERNEL);
 }
 
 /* Reset the RX DMA channel */
@@ -589,7 +588,7 @@ static bool b43legacy_dma_mapping_error(struct b43legacy_dmaring *ring,
 					 size_t buffersize,
 					 bool dma_to_device)
 {
-	if (unlikely(dma_mapping_error(addr)))
+	if (unlikely(ssb_dma_mapping_error(ring->dev->dev, addr)))
 		return 1;
 
 	switch (ring->type) {
@@ -894,9 +893,9 @@ struct b43legacy_dmaring *b43legacy_setup_dmaring(struct b43legacy_wldev *dev,
 			goto err_kfree_meta;
 
 		/* test for ability to dma to txhdr_cache */
-		dma_test = dma_map_single(dev->dev->dma_dev, ring->txhdr_cache,
-					  sizeof(struct b43legacy_txhdr_fw3),
-					  DMA_TO_DEVICE);
+		dma_test = ssb_dma_map_single(dev->dev, ring->txhdr_cache,
+					      sizeof(struct b43legacy_txhdr_fw3),
+					      DMA_TO_DEVICE);
 
 		if (b43legacy_dma_mapping_error(ring, dma_test,
 					sizeof(struct b43legacy_txhdr_fw3), 1)) {
@@ -908,7 +907,7 @@ struct b43legacy_dmaring *b43legacy_setup_dmaring(struct b43legacy_wldev *dev,
 			if (!ring->txhdr_cache)
 				goto err_kfree_meta;
 
-			dma_test = dma_map_single(dev->dev->dma_dev,
+				dma_test = ssb_dma_map_single(dev->dev,
 					ring->txhdr_cache,
 					sizeof(struct b43legacy_txhdr_fw3),
 					DMA_TO_DEVICE);
@@ -918,9 +917,9 @@ struct b43legacy_dmaring *b43legacy_setup_dmaring(struct b43legacy_wldev *dev,
 				goto err_kfree_txhdr_cache;
 		}
 
-		dma_unmap_single(dev->dev->dma_dev,
-				 dma_test, sizeof(struct b43legacy_txhdr_fw3),
-				 DMA_TO_DEVICE);
+		ssb_dma_unmap_single(dev->dev, dma_test,
+				     sizeof(struct b43legacy_txhdr_fw3),
+				     DMA_TO_DEVICE);
 	}
 
 	ring->nr_slots = nr_slots;
diff --git a/drivers/net/wireless/b43legacy/rfkill.c b/drivers/net/wireless/b43legacy/rfkill.c
index d178dfb..8935a30 100644
--- a/drivers/net/wireless/b43legacy/rfkill.c
+++ b/drivers/net/wireless/b43legacy/rfkill.c
@@ -90,7 +90,7 @@ static int b43legacy_rfkill_soft_toggle(void *data, enum rfkill_state state)
 		goto out_unlock;
 	err = 0;
 	switch (state) {
-	case RFKILL_STATE_ON:
+	case RFKILL_STATE_UNBLOCKED:
 		if (!dev->radio_hw_enable) {
 			/* No luck. We can't toggle the hardware RF-kill
 			 * button from software. */
@@ -100,10 +100,14 @@ static int b43legacy_rfkill_soft_toggle(void *data, enum rfkill_state state)
 		if (!dev->phy.radio_on)
 			b43legacy_radio_turn_on(dev);
 		break;
-	case RFKILL_STATE_OFF:
+	case RFKILL_STATE_SOFT_BLOCKED:
 		if (dev->phy.radio_on)
 			b43legacy_radio_turn_off(dev, 0);
 		break;
+	default:
+		b43legacywarn(wl, "Received unexpected rfkill state %d.\n",
+			      state);
+		break;
 	}
 
 out_unlock:
diff --git a/drivers/net/wireless/b43legacy/xmit.c b/drivers/net/wireless/b43legacy/xmit.c
index 82dc04d..a354078 100644
--- a/drivers/net/wireless/b43legacy/xmit.c
+++ b/drivers/net/wireless/b43legacy/xmit.c
@@ -442,7 +442,7 @@ void b43legacy_rx(struct b43legacy_wldev *dev,
 	struct b43legacy_plcp_hdr6 *plcp;
 	struct ieee80211_hdr *wlhdr;
 	const struct b43legacy_rxhdr_fw3 *rxhdr = _rxhdr;
-	u16 fctl;
+	__le16 fctl;
 	u16 phystat0;
 	u16 phystat3;
 	u16 chanstat;
@@ -480,7 +480,7 @@ void b43legacy_rx(struct b43legacy_wldev *dev,
 		goto drop;
 	}
 	wlhdr = (struct ieee80211_hdr *)(skb->data);
-	fctl = le16_to_cpu(wlhdr->frame_control);
+	fctl = wlhdr->frame_control;
 
 	if ((macstat & B43legacy_RX_MAC_DEC) &&
 	    !(macstat & B43legacy_RX_MAC_DECERR)) {
@@ -499,11 +499,11 @@ void b43legacy_rx(struct b43legacy_wldev *dev,
 
 		if (dev->key[keyidx].algorithm != B43legacy_SEC_ALGO_NONE) {
 			/* Remove PROTECTED flag to mark it as decrypted. */
-			B43legacy_WARN_ON(!(fctl & IEEE80211_FCTL_PROTECTED));
-			fctl &= ~IEEE80211_FCTL_PROTECTED;
-			wlhdr->frame_control = cpu_to_le16(fctl);
+			B43legacy_WARN_ON(!ieee80211_has_protected(fctl));
+			fctl &= ~cpu_to_le16(IEEE80211_FCTL_PROTECTED);
+			wlhdr->frame_control = fctl;
 
-			wlhdr_len = ieee80211_get_hdrlen(fctl);
+			wlhdr_len = ieee80211_hdrlen(fctl);
 			if (unlikely(skb->len < (wlhdr_len + 3))) {
 				b43legacydbg(dev->wl, "RX: Packet size"
 					     " underrun3\n");
@@ -556,9 +556,7 @@ void b43legacy_rx(struct b43legacy_wldev *dev,
 	 * of timestamp, i.e. about 65 milliseconds after the PHY received
 	 * the first symbol.
 	 */
-	if (((fctl & (IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE))
-	    == (IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_BEACON)) ||
-	    dev->wl->radiotap_enabled) {
+	if (ieee80211_is_beacon(fctl) || dev->wl->radiotap_enabled) {
 		u16 low_mactime_now;
 
 		b43legacy_tsf_read(dev, &status.mactime);
diff --git a/drivers/net/wireless/hostap/hostap.h b/drivers/net/wireless/hostap/hostap.h
index 547ba84..3a386a6 100644
--- a/drivers/net/wireless/hostap/hostap.h
+++ b/drivers/net/wireless/hostap/hostap.h
@@ -67,7 +67,8 @@ void * ap_crypt_get_ptrs(struct ap_data *ap, u8 *addr, int permanent,
 int prism2_ap_get_sta_qual(local_info_t *local, struct sockaddr addr[],
 			   struct iw_quality qual[], int buf_size,
 			   int aplist);
-int prism2_ap_translate_scan(struct net_device *dev, char *buffer);
+int prism2_ap_translate_scan(struct net_device *dev,
+			     struct iw_request_info *info, char *buffer);
 int prism2_hostapd(struct ap_data *ap, struct prism2_hostapd_param *param);
 
 
diff --git a/drivers/net/wireless/hostap/hostap_ap.c b/drivers/net/wireless/hostap/hostap_ap.c
index 0acd958..06b23df 100644
--- a/drivers/net/wireless/hostap/hostap_ap.c
+++ b/drivers/net/wireless/hostap/hostap_ap.c
@@ -2420,7 +2420,8 @@ int prism2_ap_get_sta_qual(local_info_t *local, struct sockaddr addr[],
 
 /* Translate our list of Access Points & Stations to a card independant
  * format that the Wireless Tools will understand - Jean II */
-int prism2_ap_translate_scan(struct net_device *dev, char *buffer)
+int prism2_ap_translate_scan(struct net_device *dev,
+			     struct iw_request_info *info, char *buffer)
 {
 	struct hostap_interface *iface;
 	local_info_t *local;
@@ -2449,8 +2450,8 @@ int prism2_ap_translate_scan(struct net_device *dev, char *buffer)
 		iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
 		memcpy(iwe.u.ap_addr.sa_data, sta->addr, ETH_ALEN);
 		iwe.len = IW_EV_ADDR_LEN;
-		current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe,
-						  IW_EV_ADDR_LEN);
+		current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+						  &iwe, IW_EV_ADDR_LEN);
 
 		/* Use the mode to indicate if it's a station or
 		 * an Access Point */
@@ -2461,8 +2462,8 @@ int prism2_ap_translate_scan(struct net_device *dev, char *buffer)
 		else
 			iwe.u.mode = IW_MODE_INFRA;
 		iwe.len = IW_EV_UINT_LEN;
-		current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe,
-						  IW_EV_UINT_LEN);
+		current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+						  &iwe, IW_EV_UINT_LEN);
 
 		/* Some quality */
 		memset(&iwe, 0, sizeof(iwe));
@@ -2477,8 +2478,8 @@ int prism2_ap_translate_scan(struct net_device *dev, char *buffer)
 		iwe.u.qual.noise = HFA384X_LEVEL_TO_dBm(sta->last_rx_silence);
 		iwe.u.qual.updated = sta->last_rx_updated;
 		iwe.len = IW_EV_QUAL_LEN;
-		current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe,
-						  IW_EV_QUAL_LEN);
+		current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+						  &iwe, IW_EV_QUAL_LEN);
 
 #ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT
 		if (sta->ap) {
@@ -2486,8 +2487,8 @@ int prism2_ap_translate_scan(struct net_device *dev, char *buffer)
 			iwe.cmd = SIOCGIWESSID;
 			iwe.u.data.length = sta->u.ap.ssid_len;
 			iwe.u.data.flags = 1;
-			current_ev = iwe_stream_add_point(current_ev, end_buf,
-							  &iwe,
+			current_ev = iwe_stream_add_point(info, current_ev,
+							  end_buf, &iwe,
 							  sta->u.ap.ssid);
 
 			memset(&iwe, 0, sizeof(iwe));
@@ -2497,10 +2498,9 @@ int prism2_ap_translate_scan(struct net_device *dev, char *buffer)
 					IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
 			else
 				iwe.u.data.flags = IW_ENCODE_DISABLED;
-			current_ev = iwe_stream_add_point(current_ev, end_buf,
-							  &iwe,
-							  sta->u.ap.ssid
-							  /* 0 byte memcpy */);
+			current_ev = iwe_stream_add_point(info, current_ev,
+							  end_buf, &iwe,
+							  sta->u.ap.ssid);
 
 			if (sta->u.ap.channel > 0 &&
 			    sta->u.ap.channel <= FREQ_COUNT) {
@@ -2510,7 +2510,7 @@ int prism2_ap_translate_scan(struct net_device *dev, char *buffer)
 					* 100000;
 				iwe.u.freq.e = 1;
 				current_ev = iwe_stream_add_event(
-					current_ev, end_buf, &iwe,
+					info, current_ev, end_buf, &iwe,
 					IW_EV_FREQ_LEN);
 			}
 
@@ -2519,8 +2519,8 @@ int prism2_ap_translate_scan(struct net_device *dev, char *buffer)
 			sprintf(buf, "beacon_interval=%d",
 				sta->listen_interval);
 			iwe.u.data.length = strlen(buf);
-			current_ev = iwe_stream_add_point(current_ev, end_buf,
-							  &iwe, buf);
+			current_ev = iwe_stream_add_point(info, current_ev,
+							  end_buf, &iwe, buf);
 		}
 #endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
 
diff --git a/drivers/net/wireless/hostap/hostap_ioctl.c b/drivers/net/wireless/hostap/hostap_ioctl.c
index 0ca0bfe..ed52d98 100644
--- a/drivers/net/wireless/hostap/hostap_ioctl.c
+++ b/drivers/net/wireless/hostap/hostap_ioctl.c
@@ -1793,6 +1793,7 @@ static int prism2_ioctl_siwscan(struct net_device *dev,
 
 #ifndef PRISM2_NO_STATION_MODES
 static char * __prism2_translate_scan(local_info_t *local,
+				      struct iw_request_info *info,
 				      struct hfa384x_hostscan_result *scan,
 				      struct hostap_bss_info *bss,
 				      char *current_ev, char *end_buf)
@@ -1823,7 +1824,7 @@ static char * __prism2_translate_scan(local_info_t *local,
 	iwe.cmd = SIOCGIWAP;
 	iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
 	memcpy(iwe.u.ap_addr.sa_data, bssid, ETH_ALEN);
-	current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe,
+	current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe,
 					  IW_EV_ADDR_LEN);
 
 	/* Other entries will be displayed in the order we give them */
@@ -1832,7 +1833,8 @@ static char * __prism2_translate_scan(local_info_t *local,
 	iwe.cmd = SIOCGIWESSID;
 	iwe.u.data.length = ssid_len;
 	iwe.u.data.flags = 1;
-	current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, ssid);
+	current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+					  &iwe, ssid);
 
 	memset(&iwe, 0, sizeof(iwe));
 	iwe.cmd = SIOCGIWMODE;
@@ -1847,8 +1849,8 @@ static char * __prism2_translate_scan(local_info_t *local,
 			iwe.u.mode = IW_MODE_MASTER;
 		else
 			iwe.u.mode = IW_MODE_ADHOC;
-		current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe,
-						  IW_EV_UINT_LEN);
+		current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+						  &iwe, IW_EV_UINT_LEN);
 	}
 
 	memset(&iwe, 0, sizeof(iwe));
@@ -1864,8 +1866,8 @@ static char * __prism2_translate_scan(local_info_t *local,
 	if (chan > 0) {
 		iwe.u.freq.m = freq_list[chan - 1] * 100000;
 		iwe.u.freq.e = 1;
-		current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe,
-						  IW_EV_FREQ_LEN);
+		current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+						  &iwe, IW_EV_FREQ_LEN);
 	}
 
 	if (scan) {
@@ -1884,8 +1886,8 @@ static char * __prism2_translate_scan(local_info_t *local,
 			| IW_QUAL_NOISE_UPDATED
 			| IW_QUAL_QUAL_INVALID
 			| IW_QUAL_DBM;
-		current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe,
-						  IW_EV_QUAL_LEN);
+		current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+						  &iwe, IW_EV_QUAL_LEN);
 	}
 
 	memset(&iwe, 0, sizeof(iwe));
@@ -1895,13 +1897,13 @@ static char * __prism2_translate_scan(local_info_t *local,
 	else
 		iwe.u.data.flags = IW_ENCODE_DISABLED;
 	iwe.u.data.length = 0;
-	current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, "");
+	current_ev = iwe_stream_add_point(info, current_ev, end_buf, &iwe, "");
 
 	/* TODO: add SuppRates into BSS table */
 	if (scan) {
 		memset(&iwe, 0, sizeof(iwe));
 		iwe.cmd = SIOCGIWRATE;
-		current_val = current_ev + IW_EV_LCP_LEN;
+		current_val = current_ev + iwe_stream_lcp_len(info);
 		pos = scan->sup_rates;
 		for (i = 0; i < sizeof(scan->sup_rates); i++) {
 			if (pos[i] == 0)
@@ -1909,11 +1911,11 @@ static char * __prism2_translate_scan(local_info_t *local,
 			/* Bit rate given in 500 kb/s units (+ 0x80) */
 			iwe.u.bitrate.value = ((pos[i] & 0x7f) * 500000);
 			current_val = iwe_stream_add_value(
-				current_ev, current_val, end_buf, &iwe,
+				info, current_ev, current_val, end_buf, &iwe,
 				IW_EV_PARAM_LEN);
 		}
 		/* Check if we added any event */
-		if ((current_val - current_ev) > IW_EV_LCP_LEN)
+		if ((current_val - current_ev) > iwe_stream_lcp_len(info))
 			current_ev = current_val;
 	}
 
@@ -1924,15 +1926,15 @@ static char * __prism2_translate_scan(local_info_t *local,
 		iwe.cmd = IWEVCUSTOM;
 		sprintf(buf, "bcn_int=%d", le16_to_cpu(scan->beacon_interval));
 		iwe.u.data.length = strlen(buf);
-		current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe,
-						  buf);
+		current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+						  &iwe, buf);
 
 		memset(&iwe, 0, sizeof(iwe));
 		iwe.cmd = IWEVCUSTOM;
 		sprintf(buf, "resp_rate=%d", le16_to_cpu(scan->rate));
 		iwe.u.data.length = strlen(buf);
-		current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe,
-						  buf);
+		current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+						  &iwe, buf);
 
 		if (local->last_scan_type == PRISM2_HOSTSCAN &&
 		    (capabilities & WLAN_CAPABILITY_IBSS)) {
@@ -1940,8 +1942,8 @@ static char * __prism2_translate_scan(local_info_t *local,
 			iwe.cmd = IWEVCUSTOM;
 			sprintf(buf, "atim=%d", le16_to_cpu(scan->atim));
 			iwe.u.data.length = strlen(buf);
-			current_ev = iwe_stream_add_point(current_ev, end_buf,
-							  &iwe, buf);
+			current_ev = iwe_stream_add_point(info, current_ev,
+							  end_buf, &iwe, buf);
 		}
 	}
 	kfree(buf);
@@ -1950,16 +1952,16 @@ static char * __prism2_translate_scan(local_info_t *local,
 		memset(&iwe, 0, sizeof(iwe));
 		iwe.cmd = IWEVGENIE;
 		iwe.u.data.length = bss->wpa_ie_len;
-		current_ev = iwe_stream_add_point(
-			current_ev, end_buf, &iwe, bss->wpa_ie);
+		current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+						  &iwe, bss->wpa_ie);
 	}
 
 	if (bss && bss->rsn_ie_len > 0 && bss->rsn_ie_len <= MAX_WPA_IE_LEN) {
 		memset(&iwe, 0, sizeof(iwe));
 		iwe.cmd = IWEVGENIE;
 		iwe.u.data.length = bss->rsn_ie_len;
-		current_ev = iwe_stream_add_point(
-			current_ev, end_buf, &iwe, bss->rsn_ie);
+		current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+						  &iwe, bss->rsn_ie);
 	}
 
 	return current_ev;
@@ -1969,6 +1971,7 @@ static char * __prism2_translate_scan(local_info_t *local,
 /* Translate scan data returned from the card to a card independant
  * format that the Wireless Tools will understand - Jean II */
 static inline int prism2_translate_scan(local_info_t *local,
+					struct iw_request_info *info,
 					char *buffer, int buflen)
 {
 	struct hfa384x_hostscan_result *scan;
@@ -1999,13 +2002,14 @@ static inline int prism2_translate_scan(local_info_t *local,
 			if (memcmp(bss->bssid, scan->bssid, ETH_ALEN) == 0) {
 				bss->included = 1;
 				current_ev = __prism2_translate_scan(
-					local, scan, bss, current_ev, end_buf);
+					local, info, scan, bss, current_ev,
+					end_buf);
 				found++;
 			}
 		}
 		if (!found) {
 			current_ev = __prism2_translate_scan(
-				local, scan, NULL, current_ev, end_buf);
+				local, info, scan, NULL, current_ev, end_buf);
 		}
 		/* Check if there is space for one more entry */
 		if ((end_buf - current_ev) <= IW_EV_ADDR_LEN) {
@@ -2023,7 +2027,7 @@ static inline int prism2_translate_scan(local_info_t *local,
 		bss = list_entry(ptr, struct hostap_bss_info, list);
 		if (bss->included)
 			continue;
-		current_ev = __prism2_translate_scan(local, NULL, bss,
+		current_ev = __prism2_translate_scan(local, info, NULL, bss,
 						     current_ev, end_buf);
 		/* Check if there is space for one more entry */
 		if ((end_buf - current_ev) <= IW_EV_ADDR_LEN) {
@@ -2070,7 +2074,7 @@ static inline int prism2_ioctl_giwscan_sta(struct net_device *dev,
 	}
 	local->scan_timestamp = 0;
 
-	res = prism2_translate_scan(local, extra, data->length);
+	res = prism2_translate_scan(local, info, extra, data->length);
 
 	if (res >= 0) {
 		data->length = res;
@@ -2103,7 +2107,7 @@ static int prism2_ioctl_giwscan(struct net_device *dev,
 		 * Jean II */
 
 		/* Translate to WE format */
-		res = prism2_ap_translate_scan(dev, extra);
+		res = prism2_ap_translate_scan(dev, info, extra);
 		if (res >= 0) {
 			printk(KERN_DEBUG "Scan result translation succeeded "
 			       "(length=%d)\n", res);
diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig
index a382c00..d7ea32f 100644
--- a/drivers/net/wireless/iwlwifi/Kconfig
+++ b/drivers/net/wireless/iwlwifi/Kconfig
@@ -8,7 +8,7 @@ config IWLCORE
 	select MAC80211_LEDS if IWLWIFI_LEDS
 	select LEDS_CLASS if IWLWIFI_LEDS
 	select RFKILL if IWLWIFI_RFKILL
-	select RFKILL_INPUT if IWLWIFI_RFKILL
+	select RFKILL_INPUT if (IWLWIFI_RFKILL && INPUT)
 
 config IWLWIFI_LEDS
 	bool
diff --git a/drivers/net/wireless/iwlwifi/iwl-rfkill.c b/drivers/net/wireless/iwlwifi/iwl-rfkill.c
index 5f09874..ffefbb4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rfkill.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rfkill.c
@@ -54,17 +54,20 @@ static int iwl_rfkill_soft_rf_kill(void *data, enum rfkill_state state)
 	mutex_lock(&priv->mutex);
 
 	switch (state) {
-	case RFKILL_STATE_ON:
+	case RFKILL_STATE_UNBLOCKED:
 		iwl_radio_kill_sw_enable_radio(priv);
 		/* if HW rf-kill is set dont allow ON state */
 		if (iwl_is_rfkill(priv))
 			err = -EBUSY;
 		break;
-	case RFKILL_STATE_OFF:
+	case RFKILL_STATE_SOFT_BLOCKED:
 		iwl_radio_kill_sw_disable_radio(priv);
 		if (!iwl_is_rfkill(priv))
 			err = -EBUSY;
 		break;
+	default:
+		IWL_WARNING("we recieved unexpected RFKILL state %d\n", state);
+		break;
 	}
 	mutex_unlock(&priv->mutex);
 
@@ -95,6 +98,7 @@ int iwl_rfkill_init(struct iwl_priv *priv)
 	priv->rfkill_mngr.rfkill->dev.class->suspend = NULL;
 	priv->rfkill_mngr.rfkill->dev.class->resume = NULL;
 
+#if defined(CONFIG_RFKILL_INPUT) || defined(CONFIG_RFKILL_INPUT_MODULE)
 	priv->rfkill_mngr.input_dev = input_allocate_device();
 	if (!priv->rfkill_mngr.input_dev) {
 		IWL_ERROR("Unable to allocate rfkill input device.\n");
@@ -109,6 +113,7 @@ int iwl_rfkill_init(struct iwl_priv *priv)
 	priv->rfkill_mngr.input_dev->dev.parent = device;
 	priv->rfkill_mngr.input_dev->evbit[0] = BIT(EV_KEY);
 	set_bit(KEY_WLAN, priv->rfkill_mngr.input_dev->keybit);
+#endif
 
 	ret = rfkill_register(priv->rfkill_mngr.rfkill);
 	if (ret) {
@@ -116,11 +121,13 @@ int iwl_rfkill_init(struct iwl_priv *priv)
 		goto free_input_dev;
 	}
 
+#if defined(CONFIG_RFKILL_INPUT) || defined(CONFIG_RFKILL_INPUT_MODULE)
 	ret = input_register_device(priv->rfkill_mngr.input_dev);
 	if (ret) {
 		IWL_ERROR("Unable to register rfkill input device: %d\n", ret);
 		goto unregister_rfkill;
 	}
+#endif
 
 	IWL_DEBUG_RF_KILL("RFKILL initialization complete.\n");
 	return ret;
@@ -130,8 +137,10 @@ unregister_rfkill:
 	priv->rfkill_mngr.rfkill = NULL;
 
 free_input_dev:
+#if defined(CONFIG_RFKILL_INPUT) || defined(CONFIG_RFKILL_INPUT_MODULE)
 	input_free_device(priv->rfkill_mngr.input_dev);
 	priv->rfkill_mngr.input_dev = NULL;
+#endif
 
 freed_rfkill:
 	if (priv->rfkill_mngr.rfkill != NULL)
@@ -147,13 +156,16 @@ EXPORT_SYMBOL(iwl_rfkill_init);
 void iwl_rfkill_unregister(struct iwl_priv *priv)
 {
 
+#if defined(CONFIG_RFKILL_INPUT) || defined(CONFIG_RFKILL_INPUT_MODULE)
 	if (priv->rfkill_mngr.input_dev)
 		input_unregister_device(priv->rfkill_mngr.input_dev);
+	input_free_device(priv->rfkill_mngr.input_dev);
+	priv->rfkill_mngr.input_dev = NULL;
+#endif
 
 	if (priv->rfkill_mngr.rfkill)
 		rfkill_unregister(priv->rfkill_mngr.rfkill);
 
-	priv->rfkill_mngr.input_dev = NULL;
 	priv->rfkill_mngr.rfkill = NULL;
 }
 EXPORT_SYMBOL(iwl_rfkill_unregister);
diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c
index d448c97..343ed38 100644
--- a/drivers/net/wireless/libertas/scan.c
+++ b/drivers/net/wireless/libertas/scan.c
@@ -776,8 +776,9 @@ out:
 #define MAX_CUSTOM_LEN 64
 
 static inline char *lbs_translate_scan(struct lbs_private *priv,
-				       char *start, char *stop,
-				       struct bss_descriptor *bss)
+					    struct iw_request_info *info,
+					    char *start, char *stop,
+					    struct bss_descriptor *bss)
 {
 	struct chan_freq_power *cfp;
 	char *current_val;	/* For rates */
@@ -801,24 +802,24 @@ static inline char *lbs_translate_scan(struct lbs_private *priv,
 	iwe.cmd = SIOCGIWAP;
 	iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
 	memcpy(iwe.u.ap_addr.sa_data, &bss->bssid, ETH_ALEN);
-	start = iwe_stream_add_event(start, stop, &iwe, IW_EV_ADDR_LEN);
+	start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_ADDR_LEN);
 
 	/* SSID */
 	iwe.cmd = SIOCGIWESSID;
 	iwe.u.data.flags = 1;
 	iwe.u.data.length = min((uint32_t) bss->ssid_len, (uint32_t) IW_ESSID_MAX_SIZE);
-	start = iwe_stream_add_point(start, stop, &iwe, bss->ssid);
+	start = iwe_stream_add_point(info, start, stop, &iwe, bss->ssid);
 
 	/* Mode */
 	iwe.cmd = SIOCGIWMODE;
 	iwe.u.mode = bss->mode;
-	start = iwe_stream_add_event(start, stop, &iwe, IW_EV_UINT_LEN);
+	start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_UINT_LEN);
 
 	/* Frequency */
 	iwe.cmd = SIOCGIWFREQ;
 	iwe.u.freq.m = (long)cfp->freq * 100000;
 	iwe.u.freq.e = 1;
-	start = iwe_stream_add_event(start, stop, &iwe, IW_EV_FREQ_LEN);
+	start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_FREQ_LEN);
 
 	/* Add quality statistics */
 	iwe.cmd = IWEVQUAL;
@@ -852,7 +853,7 @@ static inline char *lbs_translate_scan(struct lbs_private *priv,
 		nf = priv->NF[TYPE_RXPD][TYPE_AVG] / AVG_SCALE;
 		iwe.u.qual.level = CAL_RSSI(snr, nf);
 	}
-	start = iwe_stream_add_event(start, stop, &iwe, IW_EV_QUAL_LEN);
+	start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_QUAL_LEN);
 
 	/* Add encryption capability */
 	iwe.cmd = SIOCGIWENCODE;
@@ -862,9 +863,9 @@ static inline char *lbs_translate_scan(struct lbs_private *priv,
 		iwe.u.data.flags = IW_ENCODE_DISABLED;
 	}
 	iwe.u.data.length = 0;
-	start = iwe_stream_add_point(start, stop, &iwe, bss->ssid);
+	start = iwe_stream_add_point(info, start, stop, &iwe, bss->ssid);
 
-	current_val = start + IW_EV_LCP_LEN;
+	current_val = start + iwe_stream_lcp_len(info);
 
 	iwe.cmd = SIOCGIWRATE;
 	iwe.u.bitrate.fixed = 0;
@@ -874,19 +875,19 @@ static inline char *lbs_translate_scan(struct lbs_private *priv,
 	for (j = 0; bss->rates[j] && (j < sizeof(bss->rates)); j++) {
 		/* Bit rate given in 500 kb/s units */
 		iwe.u.bitrate.value = bss->rates[j] * 500000;
-		current_val = iwe_stream_add_value(start, current_val,
-					 stop, &iwe, IW_EV_PARAM_LEN);
+		current_val = iwe_stream_add_value(info, start, current_val,
+						   stop, &iwe, IW_EV_PARAM_LEN);
 	}
 	if ((bss->mode == IW_MODE_ADHOC) && priv->adhoccreate
 	    && !lbs_ssid_cmp(priv->curbssparams.ssid,
 			     priv->curbssparams.ssid_len,
 			     bss->ssid, bss->ssid_len)) {
 		iwe.u.bitrate.value = 22 * 500000;
-		current_val = iwe_stream_add_value(start, current_val,
+		current_val = iwe_stream_add_value(info, start, current_val,
 						   stop, &iwe, IW_EV_PARAM_LEN);
 	}
 	/* Check if we added any event */
-	if((current_val - start) > IW_EV_LCP_LEN)
+	if ((current_val - start) > iwe_stream_lcp_len(info))
 		start = current_val;
 
 	memset(&iwe, 0, sizeof(iwe));
@@ -895,7 +896,7 @@ static inline char *lbs_translate_scan(struct lbs_private *priv,
 		memcpy(buf, bss->wpa_ie, bss->wpa_ie_len);
 		iwe.cmd = IWEVGENIE;
 		iwe.u.data.length = bss->wpa_ie_len;
-		start = iwe_stream_add_point(start, stop, &iwe, buf);
+		start = iwe_stream_add_point(info, start, stop, &iwe, buf);
 	}
 
 	memset(&iwe, 0, sizeof(iwe));
@@ -904,7 +905,7 @@ static inline char *lbs_translate_scan(struct lbs_private *priv,
 		memcpy(buf, bss->rsn_ie, bss->rsn_ie_len);
 		iwe.cmd = IWEVGENIE;
 		iwe.u.data.length = bss->rsn_ie_len;
-		start = iwe_stream_add_point(start, stop, &iwe, buf);
+		start = iwe_stream_add_point(info, start, stop, &iwe, buf);
 	}
 
 	if (bss->mesh) {
@@ -915,7 +916,8 @@ static inline char *lbs_translate_scan(struct lbs_private *priv,
 		p += snprintf(p, MAX_CUSTOM_LEN, "mesh-type: olpc");
 		iwe.u.data.length = p - custom;
 		if (iwe.u.data.length)
-			start = iwe_stream_add_point(start, stop, &iwe, custom);
+			start = iwe_stream_add_point(info, start, stop,
+						     &iwe, custom);
 	}
 
 out:
@@ -1036,7 +1038,7 @@ int lbs_get_scan(struct net_device *dev, struct iw_request_info *info,
 		}
 
 		/* Translate to WE format this entry */
-		next_ev = lbs_translate_scan(priv, ev, stop, iter_bss);
+		next_ev = lbs_translate_scan(priv, info, ev, stop, iter_bss);
 		if (next_ev == NULL)
 			continue;
 		ev = next_ev;
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 8da352a..5d30c57 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -430,15 +430,16 @@ static int __init init_mac80211_hwsim(void)
 		hwsim_radios[i] = hw;
 
 		data = hw->priv;
-		data->dev = device_create(hwsim_class, NULL, 0, "hwsim%d", i);
+		data->dev = device_create_drvdata(hwsim_class, NULL, 0, hw,
+						"hwsim%d", i);
 		if (IS_ERR(data->dev)) {
-			printk(KERN_DEBUG "mac80211_hwsim: device_create "
+			printk(KERN_DEBUG
+			       "mac80211_hwsim: device_create_drvdata "
 			       "failed (%ld)\n", PTR_ERR(data->dev));
 			err = -ENOMEM;
 			goto failed;
 		}
 		data->dev->driver = &mac80211_hwsim_driver;
-		dev_set_drvdata(data->dev, hw);
 
 		SET_IEEE80211_DEV(hw, data->dev);
 		addr[3] = i >> 8;
diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c
index 6d13a0d..b047306 100644
--- a/drivers/net/wireless/orinoco.c
+++ b/drivers/net/wireless/orinoco.c
@@ -4046,6 +4046,7 @@ static int orinoco_ioctl_setscan(struct net_device *dev,
  * format that the Wireless Tools will understand - Jean II
  * Return message length or -errno for fatal errors */
 static inline char *orinoco_translate_scan(struct net_device *dev,
+					   struct iw_request_info *info,
 					   char *current_ev,
 					   char *end_buf,
 					   union hermes_scan_info *bss,
@@ -4062,7 +4063,8 @@ static inline char *orinoco_translate_scan(struct net_device *dev,
 	iwe.cmd = SIOCGIWAP;
 	iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
 	memcpy(iwe.u.ap_addr.sa_data, bss->a.bssid, ETH_ALEN);
-	current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_ADDR_LEN);
+	current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+					  &iwe, IW_EV_ADDR_LEN);
 
 	/* Other entries will be displayed in the order we give them */
 
@@ -4072,7 +4074,8 @@ static inline char *orinoco_translate_scan(struct net_device *dev,
 		iwe.u.data.length = 32;
 	iwe.cmd = SIOCGIWESSID;
 	iwe.u.data.flags = 1;
-	current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, bss->a.essid);
+	current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+					  &iwe, bss->a.essid);
 
 	/* Add mode */
 	iwe.cmd = SIOCGIWMODE;
@@ -4082,7 +4085,8 @@ static inline char *orinoco_translate_scan(struct net_device *dev,
 			iwe.u.mode = IW_MODE_MASTER;
 		else
 			iwe.u.mode = IW_MODE_ADHOC;
-		current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_UINT_LEN);
+		current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+						  &iwe, IW_EV_UINT_LEN);
 	}
 
 	channel = bss->s.channel;
@@ -4091,7 +4095,7 @@ static inline char *orinoco_translate_scan(struct net_device *dev,
 		iwe.cmd = SIOCGIWFREQ;
 		iwe.u.freq.m = channel_frequency[channel-1] * 100000;
 		iwe.u.freq.e = 1;
-		current_ev = iwe_stream_add_event(current_ev, end_buf,
+		current_ev = iwe_stream_add_event(info, current_ev, end_buf,
 						  &iwe, IW_EV_FREQ_LEN);
 	}
 
@@ -4106,7 +4110,8 @@ static inline char *orinoco_translate_scan(struct net_device *dev,
 		iwe.u.qual.qual = iwe.u.qual.level - iwe.u.qual.noise;
 	else
 		iwe.u.qual.qual = 0;
-	current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_QUAL_LEN);
+	current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+					  &iwe, IW_EV_QUAL_LEN);
 
 	/* Add encryption capability */
 	iwe.cmd = SIOCGIWENCODE;
@@ -4115,7 +4120,8 @@ static inline char *orinoco_translate_scan(struct net_device *dev,
 	else
 		iwe.u.data.flags = IW_ENCODE_DISABLED;
 	iwe.u.data.length = 0;
-	current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, bss->a.essid);
+	current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+					  &iwe, bss->a.essid);
 
 	/* Add EXTRA: Age to display seconds since last beacon/probe response
 	 * for given network. */
@@ -4126,11 +4132,12 @@ static inline char *orinoco_translate_scan(struct net_device *dev,
 		      jiffies_to_msecs(jiffies - last_scanned));
 	iwe.u.data.length = p - custom;
 	if (iwe.u.data.length)
-		current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, custom);
+		current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+						  &iwe, custom);
 
 	/* Bit rate is not available in Lucent/Agere firmwares */
 	if (priv->firmware_type != FIRMWARE_TYPE_AGERE) {
-		char *current_val = current_ev + IW_EV_LCP_LEN;
+		char *current_val = current_ev + iwe_stream_lcp_len(info);
 		int i;
 		int step;
 
@@ -4149,12 +4156,13 @@ static inline char *orinoco_translate_scan(struct net_device *dev,
 				break;
 			/* Bit rate given in 500 kb/s units (+ 0x80) */
 			iwe.u.bitrate.value = ((bss->p.rates[i] & 0x7f) * 500000);
-			current_val = iwe_stream_add_value(current_ev, current_val,
+			current_val = iwe_stream_add_value(info, current_ev,
+							   current_val,
 							   end_buf, &iwe,
 							   IW_EV_PARAM_LEN);
 		}
 		/* Check if we added any event */
-		if ((current_val - current_ev) > IW_EV_LCP_LEN)
+		if ((current_val - current_ev) > iwe_stream_lcp_len(info))
 			current_ev = current_val;
 	}
 
@@ -4190,7 +4198,7 @@ static int orinoco_ioctl_getscan(struct net_device *dev,
 
 	list_for_each_entry(bss, &priv->bss_list, list) {
 		/* Translate to WE format this entry */
-		current_ev = orinoco_translate_scan(dev, current_ev,
+		current_ev = orinoco_translate_scan(dev, info, current_ev,
 						    extra + srq->length,
 						    &bss->bss,
 						    bss->last_scanned);
diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c
index 5b375b2..97fa14e 100644
--- a/drivers/net/wireless/prism54/isl_ioctl.c
+++ b/drivers/net/wireless/prism54/isl_ioctl.c
@@ -571,8 +571,9 @@ prism54_set_scan(struct net_device *dev, struct iw_request_info *info,
  */
 
 static char *
-prism54_translate_bss(struct net_device *ndev, char *current_ev,
-		      char *end_buf, struct obj_bss *bss, char noise)
+prism54_translate_bss(struct net_device *ndev, struct iw_request_info *info,
+		      char *current_ev, char *end_buf, struct obj_bss *bss,
+		      char noise)
 {
 	struct iw_event iwe;	/* Temporary buffer */
 	short cap;
@@ -584,8 +585,8 @@ prism54_translate_bss(struct net_device *ndev, char *current_ev,
 	memcpy(iwe.u.ap_addr.sa_data, bss->address, 6);
 	iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
 	iwe.cmd = SIOCGIWAP;
-	current_ev =
-	    iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_ADDR_LEN);
+	current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+					  &iwe, IW_EV_ADDR_LEN);
 
 	/* The following entries will be displayed in the same order we give them */
 
@@ -593,7 +594,7 @@ prism54_translate_bss(struct net_device *ndev, char *current_ev,
 	iwe.u.data.length = bss->ssid.length;
 	iwe.u.data.flags = 1;
 	iwe.cmd = SIOCGIWESSID;
-	current_ev = iwe_stream_add_point(current_ev, end_buf,
+	current_ev = iwe_stream_add_point(info, current_ev, end_buf,
 					  &iwe, bss->ssid.octets);
 
 	/* Capabilities */
@@ -610,9 +611,8 @@ prism54_translate_bss(struct net_device *ndev, char *current_ev,
 		iwe.u.mode = IW_MODE_ADHOC;
 	iwe.cmd = SIOCGIWMODE;
 	if (iwe.u.mode)
-		current_ev =
-		    iwe_stream_add_event(current_ev, end_buf, &iwe,
-					 IW_EV_UINT_LEN);
+		current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+						  &iwe, IW_EV_UINT_LEN);
 
 	/* Encryption capability */
 	if (cap & CAP_CRYPT)
@@ -621,14 +621,15 @@ prism54_translate_bss(struct net_device *ndev, char *current_ev,
 		iwe.u.data.flags = IW_ENCODE_DISABLED;
 	iwe.u.data.length = 0;
 	iwe.cmd = SIOCGIWENCODE;
-	current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, NULL);
+	current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+					  &iwe, NULL);
 
 	/* Add frequency. (short) bss->channel is the frequency in MHz */
 	iwe.u.freq.m = bss->channel;
 	iwe.u.freq.e = 6;
 	iwe.cmd = SIOCGIWFREQ;
-	current_ev =
-	    iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_FREQ_LEN);
+	current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+					  &iwe, IW_EV_FREQ_LEN);
 
 	/* Add quality statistics */
 	iwe.u.qual.level = bss->rssi;
@@ -636,20 +637,20 @@ prism54_translate_bss(struct net_device *ndev, char *current_ev,
 	/* do a simple SNR for quality */
 	iwe.u.qual.qual = bss->rssi - noise;
 	iwe.cmd = IWEVQUAL;
-	current_ev =
-	    iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_QUAL_LEN);
+	current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+					  &iwe, IW_EV_QUAL_LEN);
 
 	/* Add WPA/RSN Information Element, if any */
 	wpa_ie_len = prism54_wpa_bss_ie_get(priv, bss->address, wpa_ie);
 	if (wpa_ie_len > 0) {
 		iwe.cmd = IWEVGENIE;
 		iwe.u.data.length = min(wpa_ie_len, (size_t)MAX_WPA_IE_LEN);
-		current_ev = iwe_stream_add_point(current_ev, end_buf,
-				&iwe, wpa_ie);
+		current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+						  &iwe, wpa_ie);
 	}
 	/* Do the bitrates */
 	{
-		char *	current_val = current_ev + IW_EV_LCP_LEN;
+		char *current_val = current_ev + iwe_stream_lcp_len(info);
 		int i;
 		int mask;
 
@@ -662,14 +663,14 @@ prism54_translate_bss(struct net_device *ndev, char *current_ev,
 		for(i = 0; i < sizeof(scan_rate_list); i++) {
 			if(bss->rates & mask) {
 				iwe.u.bitrate.value = (scan_rate_list[i] * 500000);
-				current_val = iwe_stream_add_value(current_ev, current_val,
-								   end_buf, &iwe,
-								   IW_EV_PARAM_LEN);
+				current_val = iwe_stream_add_value(
+					info, current_ev, current_val,
+					end_buf, &iwe, IW_EV_PARAM_LEN);
 			}
 			mask <<= 1;
 		}
 		/* Check if we added any event */
-		if ((current_val - current_ev) > IW_EV_LCP_LEN)
+		if ((current_val - current_ev) > iwe_stream_lcp_len(info))
 			current_ev = current_val;
 	}
 
@@ -710,7 +711,7 @@ prism54_get_scan(struct net_device *ndev, struct iw_request_info *info,
 
 	/* ok now, scan the list and translate its info */
 	for (i = 0; i < (int) bsslist->nr; i++) {
-		current_ev = prism54_translate_bss(ndev, current_ev,
+		current_ev = prism54_translate_bss(ndev, info, current_ev,
 						   extra + dwrq->length,
 						   &(bsslist->bsslist[i]),
 						   noise);
@@ -2704,6 +2705,7 @@ prism2_ioctl_scan_req(struct net_device *ndev,
                      struct prism2_hostapd_param *param)
 {
 	islpci_private *priv = netdev_priv(ndev);
+	struct iw_request_info info;
 	int i, rvalue;
 	struct obj_bsslist *bsslist;
 	u32 noise = 0;
@@ -2727,9 +2729,12 @@ prism2_ioctl_scan_req(struct net_device *ndev,
 	rvalue |= mgt_get_request(priv, DOT11_OID_BSSLIST, 0, NULL, &r);
 	bsslist = r.ptr;
 
+	info.cmd = PRISM54_HOSTAPD;
+	info.flags = 0;
+
 	/* ok now, scan the list and translate its info */
 	for (i = 0; i < min(IW_MAX_AP, (int) bsslist->nr); i++)
-		current_ev = prism54_translate_bss(ndev, current_ev,
+		current_ev = prism54_translate_bss(ndev, &info, current_ev,
 						   extra + IW_SCAN_MAX_DATA,
 						   &(bsslist->bsslist[i]),
 						   noise);
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index f001f2a..00e965b 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -1648,7 +1648,9 @@ static int rndis_iw_set_scan(struct net_device *dev,
 
 
 static char *rndis_translate_scan(struct net_device *dev,
-    char *cev, char *end_buf, struct ndis_80211_bssid_ex *bssid)
+				  struct iw_request_info *info, char *cev,
+				  char *end_buf,
+				  struct ndis_80211_bssid_ex *bssid)
 {
 #ifdef DEBUG
 	struct usbnet *usbdev = dev->priv;
@@ -1667,14 +1669,14 @@ static char *rndis_translate_scan(struct net_device *dev,
 	iwe.cmd = SIOCGIWAP;
 	iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
 	memcpy(iwe.u.ap_addr.sa_data, bssid->mac, ETH_ALEN);
-	cev = iwe_stream_add_event(cev, end_buf, &iwe, IW_EV_ADDR_LEN);
+	cev = iwe_stream_add_event(info, cev, end_buf, &iwe, IW_EV_ADDR_LEN);
 
 	devdbg(usbdev, "SSID(%d) %s", le32_to_cpu(bssid->ssid.length),
 						bssid->ssid.essid);
 	iwe.cmd = SIOCGIWESSID;
 	iwe.u.essid.length = le32_to_cpu(bssid->ssid.length);
 	iwe.u.essid.flags = 1;
-	cev = iwe_stream_add_point(cev, end_buf, &iwe, bssid->ssid.essid);
+	cev = iwe_stream_add_point(info, cev, end_buf, &iwe, bssid->ssid.essid);
 
 	devdbg(usbdev, "MODE %d", le32_to_cpu(bssid->net_infra));
 	iwe.cmd = SIOCGIWMODE;
@@ -1690,12 +1692,12 @@ static char *rndis_translate_scan(struct net_device *dev,
 		iwe.u.mode = IW_MODE_AUTO;
 		break;
 	}
-	cev = iwe_stream_add_event(cev, end_buf, &iwe, IW_EV_UINT_LEN);
+	cev = iwe_stream_add_event(info, cev, end_buf, &iwe, IW_EV_UINT_LEN);
 
 	devdbg(usbdev, "FREQ %d kHz", le32_to_cpu(bssid->config.ds_config));
 	iwe.cmd = SIOCGIWFREQ;
 	dsconfig_to_freq(le32_to_cpu(bssid->config.ds_config), &iwe.u.freq);
-	cev = iwe_stream_add_event(cev, end_buf, &iwe, IW_EV_FREQ_LEN);
+	cev = iwe_stream_add_event(info, cev, end_buf, &iwe, IW_EV_FREQ_LEN);
 
 	devdbg(usbdev, "QUAL %d", le32_to_cpu(bssid->rssi));
 	iwe.cmd = IWEVQUAL;
@@ -1704,7 +1706,7 @@ static char *rndis_translate_scan(struct net_device *dev,
 	iwe.u.qual.updated = IW_QUAL_QUAL_UPDATED
 			| IW_QUAL_LEVEL_UPDATED
 			| IW_QUAL_NOISE_INVALID;
-	cev = iwe_stream_add_event(cev, end_buf, &iwe, IW_EV_QUAL_LEN);
+	cev = iwe_stream_add_event(info, cev, end_buf, &iwe, IW_EV_QUAL_LEN);
 
 	devdbg(usbdev, "ENCODE %d", le32_to_cpu(bssid->privacy));
 	iwe.cmd = SIOCGIWENCODE;
@@ -1714,10 +1716,10 @@ static char *rndis_translate_scan(struct net_device *dev,
 	else
 		iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
 
-	cev = iwe_stream_add_point(cev, end_buf, &iwe, NULL);
+	cev = iwe_stream_add_point(info, cev, end_buf, &iwe, NULL);
 
 	devdbg(usbdev, "RATES:");
-	current_val = cev + IW_EV_LCP_LEN;
+	current_val = cev + iwe_stream_lcp_len(info);
 	iwe.cmd = SIOCGIWRATE;
 	for (i = 0; i < sizeof(bssid->rates); i++) {
 		if (bssid->rates[i] & 0x7f) {
@@ -1725,13 +1727,13 @@ static char *rndis_translate_scan(struct net_device *dev,
 				((bssid->rates[i] & 0x7f) *
 				500000);
 			devdbg(usbdev, " %d", iwe.u.bitrate.value);
-			current_val = iwe_stream_add_value(cev,
+			current_val = iwe_stream_add_value(info, cev,
 				current_val, end_buf, &iwe,
 				IW_EV_PARAM_LEN);
 		}
 	}
 
-	if ((current_val - cev) > IW_EV_LCP_LEN)
+	if ((current_val - cev) > iwe_stream_lcp_len(info))
 		cev = current_val;
 
 	beacon = le32_to_cpu(bssid->config.beacon_period);
@@ -1739,14 +1741,14 @@ static char *rndis_translate_scan(struct net_device *dev,
 	iwe.cmd = IWEVCUSTOM;
 	snprintf(sbuf, sizeof(sbuf), "bcn_int=%d", beacon);
 	iwe.u.data.length = strlen(sbuf);
-	cev = iwe_stream_add_point(cev, end_buf, &iwe, sbuf);
+	cev = iwe_stream_add_point(info, cev, end_buf, &iwe, sbuf);
 
 	atim = le32_to_cpu(bssid->config.atim_window);
 	devdbg(usbdev, "ATIM %d", atim);
 	iwe.cmd = IWEVCUSTOM;
 	snprintf(sbuf, sizeof(sbuf), "atim=%u", atim);
 	iwe.u.data.length = strlen(sbuf);
-	cev = iwe_stream_add_point(cev, end_buf, &iwe, sbuf);
+	cev = iwe_stream_add_point(info, cev, end_buf, &iwe, sbuf);
 
 	ie = (void *)(bssid->ies + sizeof(struct ndis_80211_fixed_ies));
 	ie_len = min(bssid_len - (int)sizeof(*bssid),
@@ -1760,7 +1762,7 @@ static char *rndis_translate_scan(struct net_device *dev,
 					(ie->id == MFIE_TYPE_RSN) ? 2 : 1);
 			iwe.cmd = IWEVGENIE;
 			iwe.u.data.length = min(ie->len + 2, MAX_WPA_IE_LEN);
-			cev = iwe_stream_add_point(cev, end_buf, &iwe,
+			cev = iwe_stream_add_point(info, cev, end_buf, &iwe,
 								(u8 *)ie);
 		}
 
@@ -1803,8 +1805,8 @@ static int rndis_iw_get_scan(struct net_device *dev,
 	devdbg(usbdev, "SIOCGIWSCAN: %d BSSIDs found", count);
 
 	while (count && ((void *)bssid + bssid_len) <= (buf + len)) {
-		cev = rndis_translate_scan(dev, cev, extra + IW_SCAN_MAX_DATA,
-									bssid);
+		cev = rndis_translate_scan(dev, info, cev,
+					   extra + IW_SCAN_MAX_DATA, bssid);
 		bssid = (void *)bssid + bssid_len;
 		bssid_len = le32_to_cpu(bssid->length);
 		count--;
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index bb3d835..b3dffcf 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -632,15 +632,15 @@ static void rt2400pci_init_rxentry(struct rt2x00_dev *rt2x00dev,
 				   struct queue_entry *entry)
 {
 	struct queue_entry_priv_pci *entry_priv = entry->priv_data;
+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 	u32 word;
 
 	rt2x00_desc_read(entry_priv->desc, 2, &word);
-	rt2x00_set_field32(&word, RXD_W2_BUFFER_LENGTH,
-			   entry->queue->data_size);
+	rt2x00_set_field32(&word, RXD_W2_BUFFER_LENGTH, entry->skb->len);
 	rt2x00_desc_write(entry_priv->desc, 2, word);
 
 	rt2x00_desc_read(entry_priv->desc, 1, &word);
-	rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, entry_priv->data_dma);
+	rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma);
 	rt2x00_desc_write(entry_priv->desc, 1, word);
 
 	rt2x00_desc_read(entry_priv->desc, 0, &word);
@@ -1012,7 +1012,7 @@ static void rt2400pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 	 * Start writing the descriptor words.
 	 */
 	rt2x00_desc_read(entry_priv->desc, 1, &word);
-	rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, entry_priv->data_dma);
+	rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma);
 	rt2x00_desc_write(entry_priv->desc, 1, word);
 
 	rt2x00_desc_read(txd, 2, &word);
@@ -1154,7 +1154,7 @@ static void rt2400pci_txdone(struct rt2x00_dev *rt2x00dev,
 		}
 		txdesc.retry = rt2x00_get_field32(word, TXD_W0_RETRY_COUNT);
 
-		rt2x00pci_txdone(rt2x00dev, entry, &txdesc);
+		rt2x00lib_txdone(entry, &txdesc);
 	}
 }
 
@@ -1366,7 +1366,7 @@ static void rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 			       IEEE80211_HW_SIGNAL_DBM;
 	rt2x00dev->hw->extra_tx_headroom = 0;
 
-	SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev);
+	SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
 	SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
 				rt2x00_eeprom_addr(rt2x00dev,
 						   EEPROM_MAC_ADDR_0));
@@ -1412,9 +1412,10 @@ static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 	rt2400pci_probe_hw_mode(rt2x00dev);
 
 	/*
-	 * This device requires the atim queue
+	 * This device requires the atim queue and DMA-mapped skbs.
 	 */
 	__set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags);
+	__set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags);
 
 	/*
 	 * Set the rssi offset.
@@ -1526,7 +1527,7 @@ static int rt2400pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
 	 * Write entire beacon with descriptor to register,
 	 * and kick the beacon generator.
 	 */
-	memcpy(entry_priv->data, skb->data, skb->len);
+	rt2x00queue_map_txskb(rt2x00dev, intf->beacon->skb);
 	rt2x00queue_write_tx_descriptor(intf->beacon, &txdesc);
 	rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, QID_BEACON);
 
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 3c956b9..0423c25 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -727,10 +727,11 @@ static void rt2500pci_init_rxentry(struct rt2x00_dev *rt2x00dev,
 				   struct queue_entry *entry)
 {
 	struct queue_entry_priv_pci *entry_priv = entry->priv_data;
+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 	u32 word;
 
 	rt2x00_desc_read(entry_priv->desc, 1, &word);
-	rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, entry_priv->data_dma);
+	rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma);
 	rt2x00_desc_write(entry_priv->desc, 1, word);
 
 	rt2x00_desc_read(entry_priv->desc, 0, &word);
@@ -1171,7 +1172,7 @@ static void rt2500pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 	 * Start writing the descriptor words.
 	 */
 	rt2x00_desc_read(entry_priv->desc, 1, &word);
-	rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, entry_priv->data_dma);
+	rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma);
 	rt2x00_desc_write(entry_priv->desc, 1, word);
 
 	rt2x00_desc_read(txd, 2, &word);
@@ -1311,7 +1312,7 @@ static void rt2500pci_txdone(struct rt2x00_dev *rt2x00dev,
 		}
 		txdesc.retry = rt2x00_get_field32(word, TXD_W0_RETRY_COUNT);
 
-		rt2x00pci_txdone(rt2x00dev, entry, &txdesc);
+		rt2x00lib_txdone(entry, &txdesc);
 	}
 }
 
@@ -1688,7 +1689,7 @@ static void rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 
 	rt2x00dev->hw->extra_tx_headroom = 0;
 
-	SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev);
+	SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
 	SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
 				rt2x00_eeprom_addr(rt2x00dev,
 						   EEPROM_MAC_ADDR_0));
@@ -1752,9 +1753,10 @@ static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 	rt2500pci_probe_hw_mode(rt2x00dev);
 
 	/*
-	 * This device requires the atim queue
+	 * This device requires the atim queue and DMA-mapped skbs.
 	 */
 	__set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags);
+	__set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags);
 
 	/*
 	 * Set the rssi offset.
@@ -1842,7 +1844,7 @@ static int rt2500pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
 	 * Write entire beacon with descriptor to register,
 	 * and kick the beacon generator.
 	 */
-	memcpy(entry_priv->data, skb->data, skb->len);
+	rt2x00queue_map_txskb(rt2x00dev, intf->beacon->skb);
 	rt2x00queue_write_tx_descriptor(intf->beacon, &txdesc);
 	rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, QID_BEACON);
 
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 0462d6d..0dd1cb5 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1594,7 +1594,7 @@ static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 
 	rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;
 
-	SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_usb(rt2x00dev)->dev);
+	SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
 	SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
 				rt2x00_eeprom_addr(rt2x00dev,
 						   EEPROM_MAC_ADDR_0));
@@ -1678,7 +1678,7 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 static int rt2500usb_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
 {
 	struct rt2x00_dev *rt2x00dev = hw->priv;
-	struct usb_device *usb_dev = rt2x00dev_usb_dev(rt2x00dev);
+	struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev);
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 	struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif);
 	struct queue_entry_priv_usb_bcn *bcn_priv;
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 52d8e96..6842464 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -44,7 +44,7 @@
 /*
  * Module information.
  */
-#define DRV_VERSION	"2.1.7"
+#define DRV_VERSION	"2.1.8"
 #define DRV_PROJECT	"http://rt2x00.serialmonkey.com"
 
 /*
@@ -111,33 +111,6 @@
 #define EIFS			( SIFS + (8 * (IEEE80211_HEADER + ACK_SIZE)) )
 
 /*
- * IEEE802.11 header defines
- */
-static inline int is_rts_frame(u16 fc)
-{
-	return (((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_CTL) &&
-		((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_RTS));
-}
-
-static inline int is_cts_frame(u16 fc)
-{
-	return (((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_CTL) &&
-		((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_CTS));
-}
-
-static inline int is_probe_resp(u16 fc)
-{
-	return (((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) &&
-		((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_PROBE_RESP));
-}
-
-static inline int is_beacon(u16 fc)
-{
-	return (((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) &&
-		((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_BEACON));
-}
-
-/*
  * Chipset identification
  * The chipset on the device is composed of a RT and RF chip.
  * The chipset combination is important for determining device capabilities.
@@ -628,6 +601,7 @@ enum rt2x00_flags {
 	DRIVER_REQUIRE_BEACON_GUARD,
 	DRIVER_REQUIRE_ATIM_QUEUE,
 	DRIVER_REQUIRE_SCHEDULED,
+	DRIVER_REQUIRE_DMA,
 
 	/*
 	 * Driver configuration
@@ -652,11 +626,7 @@ struct rt2x00_dev {
 	 * When accessing this variable, the rt2x00dev_{pci,usb}
 	 * macro's should be used for correct typecasting.
 	 */
-	void *dev;
-#define rt2x00dev_pci(__dev)	( (struct pci_dev *)(__dev)->dev )
-#define rt2x00dev_usb(__dev)	( (struct usb_interface *)(__dev)->dev )
-#define rt2x00dev_usb_dev(__dev)\
-	( (struct usb_device *)interface_to_usbdev(rt2x00dev_usb(__dev)) )
+	struct device *dev;
 
 	/*
 	 * Callback functions.
@@ -931,10 +901,11 @@ static inline u16 get_duration_res(const unsigned int size, const u8 rate)
 }
 
 /**
- * rt2x00queue_alloc_rxskb - allocate a skb for RX purposes.
- * @queue: The queue for which the skb will be applicable.
+ * rt2x00queue_map_txskb - Map a skb into DMA for TX purposes.
+ * @rt2x00dev: Pointer to &struct rt2x00_dev.
+ * @skb: The skb to map.
  */
-struct sk_buff *rt2x00queue_alloc_rxskb(struct data_queue *queue);
+void rt2x00queue_map_txskb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
 
 /**
  * rt2x00queue_create_tx_descriptor - Create TX descriptor from mac80211 input
@@ -985,26 +956,14 @@ struct data_queue *rt2x00queue_get_queue(struct rt2x00_dev *rt2x00dev,
 struct queue_entry *rt2x00queue_get_entry(struct data_queue *queue,
 					  enum queue_index index);
 
-/**
- * rt2x00queue_index_inc - Index incrementation function
- * @queue: Queue (&struct data_queue) to perform the action on.
- * @index: Index type (&enum queue_index) to perform the action on.
- *
- * This function will increase the requested index on the queue,
- * it will grab the appropriate locks and handle queue overflow events by
- * resetting the index to the start of the queue.
- */
-void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index);
-
-
 /*
  * Interrupt context handlers.
  */
 void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev);
 void rt2x00lib_txdone(struct queue_entry *entry,
 		      struct txdone_entry_desc *txdesc);
-void rt2x00lib_rxdone(struct queue_entry *entry,
-		      struct rxdone_entry_desc *rxdesc);
+void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
+		      struct queue_entry *entry);
 
 /*
  * mac80211 handlers.
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index cc4fee1..ae8ab71 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -469,12 +469,19 @@ static void rt2x00lib_intf_scheduled(struct work_struct *work)
 static void rt2x00lib_beacondone_iter(void *data, u8 *mac,
 				      struct ieee80211_vif *vif)
 {
+	struct rt2x00_dev *rt2x00dev = data;
 	struct rt2x00_intf *intf = vif_to_intf(vif);
 
 	if (vif->type != IEEE80211_IF_TYPE_AP &&
 	    vif->type != IEEE80211_IF_TYPE_IBSS)
 		return;
 
+	/*
+	 * Clean up the beacon skb.
+	 */
+	rt2x00queue_free_skb(rt2x00dev, intf->beacon->skb);
+	intf->beacon->skb = NULL;
+
 	spin_lock(&intf->lock);
 	intf->delayed_flags |= DELAYED_UPDATE_BEACON;
 	spin_unlock(&intf->lock);
@@ -498,6 +505,12 @@ void rt2x00lib_txdone(struct queue_entry *entry,
 {
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
+	enum data_queue_qid qid = skb_get_queue_mapping(entry->skb);
+
+	/*
+	 * Unmap the skb.
+	 */
+	rt2x00queue_unmap_skb(rt2x00dev, entry->skb);
 
 	/*
 	 * Send frame to debugfs immediately, after this call is completed
@@ -546,39 +559,77 @@ void rt2x00lib_txdone(struct queue_entry *entry,
 		ieee80211_tx_status_irqsafe(rt2x00dev->hw, entry->skb);
 	else
 		dev_kfree_skb_irq(entry->skb);
+
+	/*
+	 * Make this entry available for reuse.
+	 */
 	entry->skb = NULL;
+	entry->flags = 0;
+
+	rt2x00dev->ops->lib->init_txentry(rt2x00dev, entry);
+
+	__clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
+	rt2x00queue_index_inc(entry->queue, Q_INDEX_DONE);
+
+	/*
+	 * If the data queue was below the threshold before the txdone
+	 * handler we must make sure the packet queue in the mac80211 stack
+	 * is reenabled when the txdone handler has finished.
+	 */
+	if (!rt2x00queue_threshold(entry->queue))
+		ieee80211_wake_queue(rt2x00dev->hw, qid);
 }
 EXPORT_SYMBOL_GPL(rt2x00lib_txdone);
 
-void rt2x00lib_rxdone(struct queue_entry *entry,
-		      struct rxdone_entry_desc *rxdesc)
+void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
+		      struct queue_entry *entry)
 {
-	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+	struct rxdone_entry_desc rxdesc;
+	struct sk_buff *skb;
 	struct ieee80211_rx_status *rx_status = &rt2x00dev->rx_status;
-	unsigned int header_size = ieee80211_get_hdrlen_from_skb(entry->skb);
 	struct ieee80211_supported_band *sband;
 	struct ieee80211_hdr *hdr;
 	const struct rt2x00_rate *rate;
+	unsigned int header_size;
 	unsigned int align;
 	unsigned int i;
 	int idx = -1;
-	u16 fc;
+
+	/*
+	 * Allocate a new sk_buffer. If no new buffer available, drop the
+	 * received frame and reuse the existing buffer.
+	 */
+	skb = rt2x00queue_alloc_rxskb(rt2x00dev, entry);
+	if (!skb)
+		return;
+
+	/*
+	 * Unmap the skb.
+	 */
+	rt2x00queue_unmap_skb(rt2x00dev, entry->skb);
+
+	/*
+	 * Extract the RXD details.
+	 */
+	memset(&rxdesc, 0, sizeof(rxdesc));
+	rt2x00dev->ops->lib->fill_rxdone(entry, &rxdesc);
 
 	/*
 	 * The data behind the ieee80211 header must be
 	 * aligned on a 4 byte boundary.
 	 */
+	header_size = ieee80211_get_hdrlen_from_skb(entry->skb);
 	align = ((unsigned long)(entry->skb->data + header_size)) & 3;
 
 	if (align) {
 		skb_push(entry->skb, align);
 		/* Move entire frame in 1 command */
 		memmove(entry->skb->data, entry->skb->data + align,
-			rxdesc->size);
+			rxdesc.size);
 	}
 
 	/* Update data pointers, trim buffer to correct size */
-	skb_trim(entry->skb, rxdesc->size);
+	skb_trim(entry->skb, rxdesc.size);
 
 	/*
 	 * Update RX statistics.
@@ -587,10 +638,10 @@ void rt2x00lib_rxdone(struct queue_entry *entry,
 	for (i = 0; i < sband->n_bitrates; i++) {
 		rate = rt2x00_get_rate(sband->bitrates[i].hw_value);
 
-		if (((rxdesc->dev_flags & RXDONE_SIGNAL_PLCP) &&
-		     (rate->plcp == rxdesc->signal)) ||
-		    (!(rxdesc->dev_flags & RXDONE_SIGNAL_PLCP) &&
-		      (rate->bitrate == rxdesc->signal))) {
+		if (((rxdesc.dev_flags & RXDONE_SIGNAL_PLCP) &&
+		     (rate->plcp == rxdesc.signal)) ||
+		    (!(rxdesc.dev_flags & RXDONE_SIGNAL_PLCP) &&
+		      (rate->bitrate == rxdesc.signal))) {
 			idx = i;
 			break;
 		}
@@ -598,8 +649,8 @@ void rt2x00lib_rxdone(struct queue_entry *entry,
 
 	if (idx < 0) {
 		WARNING(rt2x00dev, "Frame received with unrecognized signal,"
-			"signal=0x%.2x, plcp=%d.\n", rxdesc->signal,
-			!!(rxdesc->dev_flags & RXDONE_SIGNAL_PLCP));
+			"signal=0x%.2x, plcp=%d.\n", rxdesc.signal,
+			!!(rxdesc.dev_flags & RXDONE_SIGNAL_PLCP));
 		idx = 0;
 	}
 
@@ -607,17 +658,17 @@ void rt2x00lib_rxdone(struct queue_entry *entry,
 	 * Only update link status if this is a beacon frame carrying our bssid.
 	 */
 	hdr = (struct ieee80211_hdr *)entry->skb->data;
-	fc = le16_to_cpu(hdr->frame_control);
-	if (is_beacon(fc) && (rxdesc->dev_flags & RXDONE_MY_BSS))
-		rt2x00lib_update_link_stats(&rt2x00dev->link, rxdesc->rssi);
+	if (ieee80211_is_beacon(hdr->frame_control) &&
+	    (rxdesc.dev_flags & RXDONE_MY_BSS))
+		rt2x00lib_update_link_stats(&rt2x00dev->link, rxdesc.rssi);
 
 	rt2x00dev->link.qual.rx_success++;
 
 	rx_status->rate_idx = idx;
 	rx_status->qual =
-	    rt2x00lib_calculate_link_signal(rt2x00dev, rxdesc->rssi);
-	rx_status->signal = rxdesc->rssi;
-	rx_status->flag = rxdesc->flags;
+	    rt2x00lib_calculate_link_signal(rt2x00dev, rxdesc.rssi);
+	rx_status->signal = rxdesc.rssi;
+	rx_status->flag = rxdesc.flags;
 	rx_status->antenna = rt2x00dev->link.ant.active.rx;
 
 	/*
@@ -626,7 +677,16 @@ void rt2x00lib_rxdone(struct queue_entry *entry,
 	 */
 	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_RXDONE, entry->skb);
 	ieee80211_rx_irqsafe(rt2x00dev->hw, entry->skb, rx_status);
-	entry->skb = NULL;
+
+	/*
+	 * Replace the skb with the freshly allocated one.
+	 */
+	entry->skb = skb;
+	entry->flags = 0;
+
+	rt2x00dev->ops->lib->init_rxentry(rt2x00dev, entry);
+
+	rt2x00queue_index_inc(entry->queue, Q_INDEX);
 }
 EXPORT_SYMBOL_GPL(rt2x00lib_rxdone);
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index 558f45b..1d1f074 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -98,10 +98,57 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
 void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
 		      struct ieee80211_conf *conf, const int force_config);
 
-/*
- * Queue handlers.
+/**
+ * DOC: Queue handlers
+ */
+
+/**
+ * rt2x00queue_alloc_rxskb - allocate a skb for RX purposes.
+ * @rt2x00dev: Pointer to &struct rt2x00_dev.
+ * @queue: The queue for which the skb will be applicable.
+ */
+struct sk_buff *rt2x00queue_alloc_rxskb(struct rt2x00_dev *rt2x00dev,
+					struct queue_entry *entry);
+
+/**
+ * rt2x00queue_unmap_skb - Unmap a skb from DMA.
+ * @rt2x00dev: Pointer to &struct rt2x00_dev.
+ * @skb: The skb to unmap.
+ */
+void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
+
+/**
+ * rt2x00queue_free_skb - free a skb
+ * @rt2x00dev: Pointer to &struct rt2x00_dev.
+ * @skb: The skb to free.
+ */
+void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
+
+/**
+ * rt2x00queue_free_skb - free a skb
+ * @rt2x00dev: Pointer to &struct rt2x00_dev.
+ * @skb: The skb to free.
+ */
+void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
+
+/**
+ * rt2x00queue_write_tx_frame - Write TX frame to hardware
+ * @queue: Queue over which the frame should be send
+ * @skb: The skb to send
  */
 int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb);
+
+/**
+ * rt2x00queue_index_inc - Index incrementation function
+ * @queue: Queue (&struct data_queue) to perform the action on.
+ * @index: Index type (&enum queue_index) to perform the action on.
+ *
+ * This function will increase the requested index on the queue,
+ * it will grab the appropriate locks and handle queue overflow events by
+ * resetting the index to the start of the queue.
+ */
+void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index);
+
 void rt2x00queue_init_rx(struct rt2x00_dev *rt2x00dev);
 void rt2x00queue_init_tx(struct rt2x00_dev *rt2x00dev);
 int rt2x00queue_initialize(struct rt2x00_dev *rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c
index 8d6ad18..adf2876 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.c
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
@@ -60,12 +60,8 @@ int rt2x00pci_write_tx_data(struct queue_entry *entry)
 	 * Fill in skb descriptor
 	 */
 	skbdesc = get_skb_frame_desc(entry->skb);
-	memset(skbdesc, 0, sizeof(*skbdesc));
 	skbdesc->desc = entry_priv->desc;
 	skbdesc->desc_len = entry->queue->desc_size;
-	skbdesc->entry = entry;
-
-	memcpy(entry_priv->data, entry->skb->data, entry->skb->len);
 
 	return 0;
 }
@@ -80,7 +76,6 @@ void rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev)
 	struct queue_entry *entry;
 	struct queue_entry_priv_pci *entry_priv;
 	struct skb_frame_desc *skbdesc;
-	struct rxdone_entry_desc rxdesc;
 	u32 word;
 
 	while (1) {
@@ -91,110 +86,27 @@ void rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev)
 		if (rt2x00_get_field32(word, RXD_ENTRY_OWNER_NIC))
 			break;
 
-		memset(&rxdesc, 0, sizeof(rxdesc));
-		rt2x00dev->ops->lib->fill_rxdone(entry, &rxdesc);
-
 		/*
-		 * Allocate the sk_buffer and copy all data into it.
-		 */
-		entry->skb = rt2x00queue_alloc_rxskb(queue);
-		if (!entry->skb)
-			return;
-
-		memcpy(entry->skb->data, entry_priv->data, rxdesc.size);
-		skb_trim(entry->skb, rxdesc.size);
-
-		/*
-		 * Fill in skb descriptor
+		 * Fill in desc fields of the skb descriptor
 		 */
 		skbdesc = get_skb_frame_desc(entry->skb);
-		memset(skbdesc, 0, sizeof(*skbdesc));
 		skbdesc->desc = entry_priv->desc;
-		skbdesc->desc_len = queue->desc_size;
-		skbdesc->entry = entry;
+		skbdesc->desc_len = entry->queue->desc_size;
 
 		/*
 		 * Send the frame to rt2x00lib for further processing.
 		 */
-		rt2x00lib_rxdone(entry, &rxdesc);
-
-		if (test_bit(DEVICE_ENABLED_RADIO, &queue->rt2x00dev->flags)) {
-			rt2x00_set_field32(&word, RXD_ENTRY_OWNER_NIC, 1);
-			rt2x00_desc_write(entry_priv->desc, 0, word);
-		}
-
-		rt2x00queue_index_inc(queue, Q_INDEX);
+		rt2x00lib_rxdone(rt2x00dev, entry);
 	}
 }
 EXPORT_SYMBOL_GPL(rt2x00pci_rxdone);
 
-void rt2x00pci_txdone(struct rt2x00_dev *rt2x00dev, struct queue_entry *entry,
-		      struct txdone_entry_desc *txdesc)
-{
-	struct queue_entry_priv_pci *entry_priv = entry->priv_data;
-	enum data_queue_qid qid = skb_get_queue_mapping(entry->skb);
-	u32 word;
-
-	rt2x00lib_txdone(entry, txdesc);
-
-	/*
-	 * Make this entry available for reuse.
-	 */
-	entry->flags = 0;
-
-	rt2x00_desc_read(entry_priv->desc, 0, &word);
-	rt2x00_set_field32(&word, TXD_ENTRY_OWNER_NIC, 0);
-	rt2x00_set_field32(&word, TXD_ENTRY_VALID, 0);
-	rt2x00_desc_write(entry_priv->desc, 0, word);
-
-	__clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
-	rt2x00queue_index_inc(entry->queue, Q_INDEX_DONE);
-
-	/*
-	 * If the data queue was below the threshold before the txdone
-	 * handler we must make sure the packet queue in the mac80211 stack
-	 * is reenabled when the txdone handler has finished.
-	 */
-	if (!rt2x00queue_threshold(entry->queue))
-		ieee80211_wake_queue(rt2x00dev->hw, qid);
-
-}
-EXPORT_SYMBOL_GPL(rt2x00pci_txdone);
-
 /*
  * Device initialization handlers.
  */
-#define desc_size(__queue)			\
-({						\
-	 ((__queue)->limit * (__queue)->desc_size);\
-})
-
-#define data_size(__queue)			\
-({						\
-	 ((__queue)->limit * (__queue)->data_size);\
-})
-
-#define dma_size(__queue)			\
-({						\
-	data_size(__queue) + desc_size(__queue);\
-})
-
-#define desc_offset(__queue, __base, __i)	\
-({						\
-	(__base) + data_size(__queue) + 	\
-	    ((__i) * (__queue)->desc_size);	\
-})
-
-#define data_offset(__queue, __base, __i)	\
-({						\
-	(__base) +				\
-	    ((__i) * (__queue)->data_size);	\
-})
-
 static int rt2x00pci_alloc_queue_dma(struct rt2x00_dev *rt2x00dev,
 				     struct data_queue *queue)
 {
-	struct pci_dev *pci_dev = rt2x00dev_pci(rt2x00dev);
 	struct queue_entry_priv_pci *entry_priv;
 	void *addr;
 	dma_addr_t dma;
@@ -203,21 +115,21 @@ static int rt2x00pci_alloc_queue_dma(struct rt2x00_dev *rt2x00dev,
 	/*
 	 * Allocate DMA memory for descriptor and buffer.
 	 */
-	addr = pci_alloc_consistent(pci_dev, dma_size(queue), &dma);
+	addr = dma_alloc_coherent(rt2x00dev->dev,
+				  queue->limit * queue->desc_size,
+				  &dma, GFP_KERNEL | GFP_DMA);
 	if (!addr)
 		return -ENOMEM;
 
-	memset(addr, 0, dma_size(queue));
+	memset(addr, 0, queue->limit * queue->desc_size);
 
 	/*
 	 * Initialize all queue entries to contain valid addresses.
 	 */
 	for (i = 0; i < queue->limit; i++) {
 		entry_priv = queue->entries[i].priv_data;
-		entry_priv->desc = desc_offset(queue, addr, i);
-		entry_priv->desc_dma = desc_offset(queue, dma, i);
-		entry_priv->data = data_offset(queue, addr, i);
-		entry_priv->data_dma = data_offset(queue, dma, i);
+		entry_priv->desc = addr + i * queue->desc_size;
+		entry_priv->desc_dma = dma + i * queue->desc_size;
 	}
 
 	return 0;
@@ -226,19 +138,19 @@ static int rt2x00pci_alloc_queue_dma(struct rt2x00_dev *rt2x00dev,
 static void rt2x00pci_free_queue_dma(struct rt2x00_dev *rt2x00dev,
 				     struct data_queue *queue)
 {
-	struct pci_dev *pci_dev = rt2x00dev_pci(rt2x00dev);
 	struct queue_entry_priv_pci *entry_priv =
 	    queue->entries[0].priv_data;
 
-	if (entry_priv->data)
-		pci_free_consistent(pci_dev, dma_size(queue),
-				    entry_priv->data, entry_priv->data_dma);
-	entry_priv->data = NULL;
+	if (entry_priv->desc)
+		dma_free_coherent(rt2x00dev->dev,
+				  queue->limit * queue->desc_size,
+				  entry_priv->desc, entry_priv->desc_dma);
+	entry_priv->desc = NULL;
 }
 
 int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev)
 {
-	struct pci_dev *pci_dev = rt2x00dev_pci(rt2x00dev);
+	struct pci_dev *pci_dev = to_pci_dev(rt2x00dev->dev);
 	struct data_queue *queue;
 	int status;
 
@@ -279,7 +191,7 @@ void rt2x00pci_uninitialize(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Free irq line.
 	 */
-	free_irq(rt2x00dev_pci(rt2x00dev)->irq, rt2x00dev);
+	free_irq(to_pci_dev(rt2x00dev->dev)->irq, rt2x00dev);
 
 	/*
 	 * Free DMA
@@ -308,7 +220,7 @@ static void rt2x00pci_free_reg(struct rt2x00_dev *rt2x00dev)
 
 static int rt2x00pci_alloc_reg(struct rt2x00_dev *rt2x00dev)
 {
-	struct pci_dev *pci_dev = rt2x00dev_pci(rt2x00dev);
+	struct pci_dev *pci_dev = to_pci_dev(rt2x00dev->dev);
 
 	rt2x00dev->csr.base = ioremap(pci_resource_start(pci_dev, 0),
 				      pci_resource_len(pci_dev, 0));
@@ -357,7 +269,7 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
 	if (pci_set_mwi(pci_dev))
 		ERROR_PROBE("MWI not available.\n");
 
-	if (pci_set_dma_mask(pci_dev, DMA_32BIT_MASK)) {
+	if (dma_set_mask(&pci_dev->dev, DMA_32BIT_MASK)) {
 		ERROR_PROBE("PCI DMA not supported.\n");
 		retval = -EIO;
 		goto exit_disable_device;
@@ -373,7 +285,7 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
 	pci_set_drvdata(pci_dev, hw);
 
 	rt2x00dev = hw->priv;
-	rt2x00dev->dev = pci_dev;
+	rt2x00dev->dev = &pci_dev->dev;
 	rt2x00dev->ops = ops;
 	rt2x00dev->hw = hw;
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.h b/drivers/net/wireless/rt2x00/rt2x00pci.h
index 87c4a0c..50c6df4 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.h
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.h
@@ -107,9 +107,6 @@ int rt2x00pci_write_tx_data(struct queue_entry *entry);
 struct queue_entry_priv_pci {
 	__le32 *desc;
 	dma_addr_t desc_dma;
-
-	void *data;
-	dma_addr_t data_dma;
 };
 
 /**
@@ -118,15 +115,6 @@ struct queue_entry_priv_pci {
  */
 void rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev);
 
-/**
- * rt2x00pci_txdone - Handle TX done events
- * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
- * @entry: Entry which has completed the transmission of a frame.
- * @desc: TX done descriptor
- */
-void rt2x00pci_txdone(struct rt2x00_dev *rt2x00dev, struct queue_entry *entry,
-		      struct txdone_entry_desc *desc);
-
 /*
  * Device initialization handlers.
  */
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 7b52039..8e86611 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -25,34 +25,30 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/dma-mapping.h>
 
 #include "rt2x00.h"
 #include "rt2x00lib.h"
 
-struct sk_buff *rt2x00queue_alloc_rxskb(struct data_queue *queue)
+struct sk_buff *rt2x00queue_alloc_rxskb(struct rt2x00_dev *rt2x00dev,
+					struct queue_entry *entry)
 {
-	struct sk_buff *skb;
 	unsigned int frame_size;
 	unsigned int reserved_size;
+	struct sk_buff *skb;
+	struct skb_frame_desc *skbdesc;
 
 	/*
 	 * The frame size includes descriptor size, because the
 	 * hardware directly receive the frame into the skbuffer.
 	 */
-	frame_size = queue->data_size + queue->desc_size;
+	frame_size = entry->queue->data_size + entry->queue->desc_size;
 
 	/*
-	 * For the allocation we should keep a few things in mind:
-	 * 1) 4byte alignment of 802.11 payload
-	 *
-	 * For (1) we need at most 4 bytes to guarentee the correct
-	 * alignment. We are going to optimize the fact that the chance
-	 * that the 802.11 header_size % 4 == 2 is much bigger then
-	 * anything else. However since we need to move the frame up
-	 * to 3 bytes to the front, which means we need to preallocate
-	 * 6 bytes.
+	 * Reserve a few bytes extra headroom to allow drivers some moving
+	 * space (e.g. for alignment), while keeping the skb aligned.
 	 */
-	reserved_size = 6;
+	reserved_size = 8;
 
 	/*
 	 * Allocate skbuffer.
@@ -64,9 +60,56 @@ struct sk_buff *rt2x00queue_alloc_rxskb(struct data_queue *queue)
 	skb_reserve(skb, reserved_size);
 	skb_put(skb, frame_size);
 
+	/*
+	 * Populate skbdesc.
+	 */
+	skbdesc = get_skb_frame_desc(skb);
+	memset(skbdesc, 0, sizeof(*skbdesc));
+	skbdesc->entry = entry;
+
+	if (test_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags)) {
+		skbdesc->skb_dma = dma_map_single(rt2x00dev->dev,
+						  skb->data,
+						  skb->len,
+						  DMA_FROM_DEVICE);
+		skbdesc->flags |= SKBDESC_DMA_MAPPED_RX;
+	}
+
 	return skb;
 }
-EXPORT_SYMBOL_GPL(rt2x00queue_alloc_rxskb);
+
+void rt2x00queue_map_txskb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb)
+{
+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
+
+	skbdesc->skb_dma = dma_map_single(rt2x00dev->dev, skb->data, skb->len,
+					  DMA_TO_DEVICE);
+	skbdesc->flags |= SKBDESC_DMA_MAPPED_TX;
+}
+EXPORT_SYMBOL_GPL(rt2x00queue_map_txskb);
+
+void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb)
+{
+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
+
+	if (skbdesc->flags & SKBDESC_DMA_MAPPED_RX) {
+		dma_unmap_single(rt2x00dev->dev, skbdesc->skb_dma, skb->len,
+				 DMA_FROM_DEVICE);
+		skbdesc->flags &= ~SKBDESC_DMA_MAPPED_RX;
+	}
+
+	if (skbdesc->flags & SKBDESC_DMA_MAPPED_TX) {
+		dma_unmap_single(rt2x00dev->dev, skbdesc->skb_dma, skb->len,
+				 DMA_TO_DEVICE);
+		skbdesc->flags &= ~SKBDESC_DMA_MAPPED_TX;
+	}
+}
+
+void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb)
+{
+	rt2x00queue_unmap_skb(rt2x00dev, skb);
+	dev_kfree_skb_any(skb);
+}
 
 void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
 				      struct txentry_desc *txdesc)
@@ -80,7 +123,6 @@ void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
 	unsigned int data_length;
 	unsigned int duration;
 	unsigned int residual;
-	u16 frame_control;
 
 	memset(txdesc, 0, sizeof(*txdesc));
 
@@ -96,11 +138,6 @@ void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
 	data_length = entry->skb->len + 4;
 
 	/*
-	 * Read required fields from ieee80211 header.
-	 */
-	frame_control = le16_to_cpu(hdr->frame_control);
-
-	/*
 	 * Check whether this frame is to be acked.
 	 */
 	if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK))
@@ -109,9 +146,10 @@ void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
 	/*
 	 * Check if this is a RTS/CTS frame
 	 */
-	if (is_rts_frame(frame_control) || is_cts_frame(frame_control)) {
+	if (ieee80211_is_rts(hdr->frame_control) ||
+	    ieee80211_is_cts(hdr->frame_control)) {
 		__set_bit(ENTRY_TXD_BURST, &txdesc->flags);
-		if (is_rts_frame(frame_control))
+		if (ieee80211_is_rts(hdr->frame_control))
 			__set_bit(ENTRY_TXD_RTS_FRAME, &txdesc->flags);
 		else
 			__set_bit(ENTRY_TXD_CTS_FRAME, &txdesc->flags);
@@ -139,7 +177,8 @@ void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
 	 * Beacons and probe responses require the tsf timestamp
 	 * to be inserted into the frame.
 	 */
-	if (txdesc->queue == QID_BEACON || is_probe_resp(frame_control))
+	if (ieee80211_is_beacon(hdr->frame_control) ||
+	    ieee80211_is_probe_resp(hdr->frame_control))
 		__set_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags);
 
 	/*
@@ -236,6 +275,7 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb)
 {
 	struct queue_entry *entry = rt2x00queue_get_entry(queue, Q_INDEX);
 	struct txentry_desc txdesc;
+	struct skb_frame_desc *skbdesc;
 
 	if (unlikely(rt2x00queue_full(queue)))
 		return -EINVAL;
@@ -256,11 +296,21 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb)
 	entry->skb = skb;
 	rt2x00queue_create_tx_descriptor(entry, &txdesc);
 
+	/*
+	 * skb->cb array is now ours and we are free to use it.
+	 */
+	skbdesc = get_skb_frame_desc(entry->skb);
+	memset(skbdesc, 0, sizeof(*skbdesc));
+	skbdesc->entry = entry;
+
 	if (unlikely(queue->rt2x00dev->ops->lib->write_tx_data(entry))) {
 		__clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
 		return -EIO;
 	}
 
+	if (test_bit(DRIVER_REQUIRE_DMA, &queue->rt2x00dev->flags))
+		rt2x00queue_map_txskb(queue->rt2x00dev, skb);
+
 	__set_bit(ENTRY_DATA_PENDING, &entry->flags);
 
 	rt2x00queue_index_inc(queue, Q_INDEX);
@@ -336,7 +386,6 @@ void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index)
 
 	spin_unlock_irqrestore(&queue->lock, irqflags);
 }
-EXPORT_SYMBOL_GPL(rt2x00queue_index_inc);
 
 static void rt2x00queue_reset(struct data_queue *queue)
 {
@@ -426,12 +475,41 @@ static int rt2x00queue_alloc_entries(struct data_queue *queue,
 	return 0;
 }
 
+static void rt2x00queue_free_skbs(struct rt2x00_dev *rt2x00dev,
+				  struct data_queue *queue)
+{
+	unsigned int i;
+
+	if (!queue->entries)
+		return;
+
+	for (i = 0; i < queue->limit; i++) {
+		if (queue->entries[i].skb)
+			rt2x00queue_free_skb(rt2x00dev, queue->entries[i].skb);
+	}
+}
+
+static int rt2x00queue_alloc_rxskbs(struct rt2x00_dev *rt2x00dev,
+				    struct data_queue *queue)
+{
+	unsigned int i;
+	struct sk_buff *skb;
+
+	for (i = 0; i < queue->limit; i++) {
+		skb = rt2x00queue_alloc_rxskb(rt2x00dev, &queue->entries[i]);
+		if (!skb)
+			return -ENOMEM;
+		queue->entries[i].skb = skb;
+	}
+
+	return 0;
+}
+
 int rt2x00queue_initialize(struct rt2x00_dev *rt2x00dev)
 {
 	struct data_queue *queue;
 	int status;
 
-
 	status = rt2x00queue_alloc_entries(rt2x00dev->rx, rt2x00dev->ops->rx);
 	if (status)
 		goto exit;
@@ -446,11 +524,14 @@ int rt2x00queue_initialize(struct rt2x00_dev *rt2x00dev)
 	if (status)
 		goto exit;
 
-	if (!test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags))
-		return 0;
+	if (test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags)) {
+		status = rt2x00queue_alloc_entries(&rt2x00dev->bcn[1],
+						   rt2x00dev->ops->atim);
+		if (status)
+			goto exit;
+	}
 
-	status = rt2x00queue_alloc_entries(&rt2x00dev->bcn[1],
-					   rt2x00dev->ops->atim);
+	status = rt2x00queue_alloc_rxskbs(rt2x00dev, rt2x00dev->rx);
 	if (status)
 		goto exit;
 
@@ -468,6 +549,8 @@ void rt2x00queue_uninitialize(struct rt2x00_dev *rt2x00dev)
 {
 	struct data_queue *queue;
 
+	rt2x00queue_free_skbs(rt2x00dev, rt2x00dev->rx);
+
 	queue_for_each(rt2x00dev, queue) {
 		kfree(queue->entries);
 		queue->entries = NULL;
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index fcf52520..5dd9cca 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -42,15 +42,18 @@
 /**
  * DOC: Number of entries per queue
  *
- * After research it was concluded that 12 entries in a RX and TX
- * queue would be sufficient. Although this is almost one third of
- * the amount the legacy driver allocated, the queues aren't getting
- * filled to the maximum even when working with the maximum rate.
+ * Under normal load without fragmentation 12 entries are sufficient
+ * without the queue being filled up to the maximum. When using fragmentation
+ * and the queue threshold code we need to add some additional margins to
+ * make sure the queue will never (or only under extreme load) fill up
+ * completely.
+ * Since we don't use preallocated DMA having a large number of queue entries
+ * will have only minimal impact on the memory requirements for the queue.
  */
-#define RX_ENTRIES	12
-#define TX_ENTRIES	12
+#define RX_ENTRIES	24
+#define TX_ENTRIES	24
 #define BEACON_ENTRIES	1
-#define ATIM_ENTRIES	1
+#define ATIM_ENTRIES	8
 
 /**
  * enum data_queue_qid: Queue identification
@@ -82,10 +85,13 @@ enum data_queue_qid {
 /**
  * enum skb_frame_desc_flags: Flags for &struct skb_frame_desc
  *
+ * @SKBDESC_DMA_MAPPED_RX: &skb_dma field has been mapped for RX
+ * @SKBDESC_DMA_MAPPED_TX: &skb_dma field has been mapped for TX
  */
-//enum skb_frame_desc_flags {
-//	TEMPORARILY EMPTY
-//};
+enum skb_frame_desc_flags {
+	SKBDESC_DMA_MAPPED_RX = (1 << 0),
+	SKBDESC_DMA_MAPPED_TX = (1 << 1),
+};
 
 /**
  * struct skb_frame_desc: Descriptor information for the skb buffer
@@ -94,19 +100,20 @@ enum data_queue_qid {
  * this structure should not exceed the size of that array (40 bytes).
  *
  * @flags: Frame flags, see &enum skb_frame_desc_flags.
- * @data: Pointer to data part of frame (Start of ieee80211 header).
+ * @desc_len: Length of the frame descriptor.
  * @desc: Pointer to descriptor part of the frame.
  *	Note that this pointer could point to something outside
  *	of the scope of the skb->data pointer.
- * @data_len: Length of the frame data.
- * @desc_len: Length of the frame descriptor.
+ * @skb_dma: (PCI-only) the DMA address associated with the sk buffer.
  * @entry: The entry to which this sk buffer belongs.
  */
 struct skb_frame_desc {
 	unsigned int flags;
 
-	void *desc;
 	unsigned int desc_len;
+	void *desc;
+
+	dma_addr_t skb_dma;
 
 	struct queue_entry *entry;
 };
diff --git a/drivers/net/wireless/rt2x00/rt2x00rfkill.c b/drivers/net/wireless/rt2x00/rt2x00rfkill.c
index fcef988..207281c 100644
--- a/drivers/net/wireless/rt2x00/rt2x00rfkill.c
+++ b/drivers/net/wireless/rt2x00/rt2x00rfkill.c
@@ -45,14 +45,17 @@ static int rt2x00rfkill_toggle_radio(void *data, enum rfkill_state state)
 	if (!test_bit(DEVICE_STARTED, &rt2x00dev->flags))
 		return 0;
 
-	if (state == RFKILL_STATE_ON) {
+	if (state == RFKILL_STATE_UNBLOCKED) {
 		INFO(rt2x00dev, "Hardware button pressed, enabling radio.\n");
 		__clear_bit(DEVICE_DISABLED_RADIO_HW, &rt2x00dev->flags);
 		retval = rt2x00lib_enable_radio(rt2x00dev);
-	} else if (state == RFKILL_STATE_OFF) {
+	} else if (state == RFKILL_STATE_SOFT_BLOCKED) {
 		INFO(rt2x00dev, "Hardware button pressed, disabling radio.\n");
 		__set_bit(DEVICE_DISABLED_RADIO_HW, &rt2x00dev->flags);
 		rt2x00lib_disable_radio(rt2x00dev);
+	} else {
+		WARNING(rt2x00dev, "Received unexpected rfkill state %d.\n",
+			state);
 	}
 
 	return retval;
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index 3080969..83862e7 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -40,7 +40,7 @@ int rt2x00usb_vendor_request(struct rt2x00_dev *rt2x00dev,
 			     void *buffer, const u16 buffer_length,
 			     const int timeout)
 {
-	struct usb_device *usb_dev = rt2x00dev_usb_dev(rt2x00dev);
+	struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev);
 	int status;
 	unsigned int i;
 	unsigned int pipe =
@@ -130,10 +130,9 @@ static void rt2x00usb_interrupt_txdone(struct urb *urb)
 	struct queue_entry *entry = (struct queue_entry *)urb->context;
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 	struct txdone_entry_desc txdesc;
-	enum data_queue_qid qid = skb_get_queue_mapping(entry->skb);
 
 	if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) ||
-	    !__test_and_clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
+	    !test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
 		return;
 
 	/*
@@ -157,26 +156,12 @@ static void rt2x00usb_interrupt_txdone(struct urb *urb)
 	txdesc.retry = 0;
 
 	rt2x00lib_txdone(entry, &txdesc);
-
-	/*
-	 * Make this entry available for reuse.
-	 */
-	entry->flags = 0;
-	rt2x00queue_index_inc(entry->queue, Q_INDEX_DONE);
-
-	/*
-	 * If the data queue was below the threshold before the txdone
-	 * handler we must make sure the packet queue in the mac80211 stack
-	 * is reenabled when the txdone handler has finished.
-	 */
-	if (!rt2x00queue_threshold(entry->queue))
-		ieee80211_wake_queue(rt2x00dev->hw, qid);
 }
 
 int rt2x00usb_write_tx_data(struct queue_entry *entry)
 {
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
-	struct usb_device *usb_dev = rt2x00dev_usb_dev(rt2x00dev);
+	struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev);
 	struct queue_entry_priv_usb *entry_priv = entry->priv_data;
 	struct skb_frame_desc *skbdesc;
 	u32 length;
@@ -191,10 +176,8 @@ int rt2x00usb_write_tx_data(struct queue_entry *entry)
 	 * Fill in skb descriptor
 	 */
 	skbdesc = get_skb_frame_desc(entry->skb);
-	memset(skbdesc, 0, sizeof(*skbdesc));
 	skbdesc->desc = entry->skb->data;
 	skbdesc->desc_len = entry->queue->desc_size;
-	skbdesc->entry = entry;
 
 	/*
 	 * USB devices cannot blindly pass the skb->len as the
@@ -264,13 +247,11 @@ static void rt2x00usb_interrupt_rxdone(struct urb *urb)
 {
 	struct queue_entry *entry = (struct queue_entry *)urb->context;
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
-	struct sk_buff *skb;
-	struct skb_frame_desc *skbdesc;
-	struct rxdone_entry_desc rxdesc;
+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 	u8 rxd[32];
 
 	if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) ||
-	    !test_and_clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
+	    !test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
 		return;
 
 	/*
@@ -278,50 +259,22 @@ static void rt2x00usb_interrupt_rxdone(struct urb *urb)
 	 * to be actually valid, or if the urb is signaling
 	 * a problem.
 	 */
-	if (urb->actual_length < entry->queue->desc_size || urb->status)
-		goto skip_entry;
+	if (urb->actual_length < entry->queue->desc_size || urb->status) {
+		__set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
+		usb_submit_urb(urb, GFP_ATOMIC);
+		return;
+	}
 
 	/*
-	 * Fill in skb descriptor
+	 * Fill in desc fields of the skb descriptor
 	 */
-	skbdesc = get_skb_frame_desc(entry->skb);
-	memset(skbdesc, 0, sizeof(*skbdesc));
-	skbdesc->entry = entry;
 	skbdesc->desc = rxd;
 	skbdesc->desc_len = entry->queue->desc_size;
 
-	memset(&rxdesc, 0, sizeof(rxdesc));
-	rt2x00dev->ops->lib->fill_rxdone(entry, &rxdesc);
-
-	/*
-	 * Allocate a new sk buffer to replace the current one.
-	 * If allocation fails, we should drop the current frame
-	 * so we can recycle the existing sk buffer for the new frame.
-	 */
-	skb = rt2x00queue_alloc_rxskb(entry->queue);
-	if (!skb)
-		goto skip_entry;
-
 	/*
 	 * Send the frame to rt2x00lib for further processing.
 	 */
-	rt2x00lib_rxdone(entry, &rxdesc);
-
-	/*
-	 * Replace current entry's skb with the newly allocated one,
-	 * and reinitialize the urb.
-	 */
-	entry->skb = skb;
-	urb->transfer_buffer = entry->skb->data;
-	urb->transfer_buffer_length = entry->skb->len;
-
-skip_entry:
-	if (test_bit(DEVICE_ENABLED_RADIO, &entry->queue->rt2x00dev->flags)) {
-		__set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
-		usb_submit_urb(urb, GFP_ATOMIC);
-	}
-
-	rt2x00queue_index_inc(entry->queue, Q_INDEX);
+	rt2x00lib_rxdone(rt2x00dev, entry);
 }
 
 /*
@@ -331,6 +284,7 @@ void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev)
 {
 	struct queue_entry_priv_usb *entry_priv;
 	struct queue_entry_priv_usb_bcn *bcn_priv;
+	struct data_queue *queue;
 	unsigned int i;
 
 	rt2x00usb_vendor_request_sw(rt2x00dev, USB_RX_CONTROL, 0, 0,
@@ -339,9 +293,11 @@ void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Cancel all queues.
 	 */
-	for (i = 0; i < rt2x00dev->rx->limit; i++) {
-		entry_priv = rt2x00dev->rx->entries[i].priv_data;
-		usb_kill_urb(entry_priv->urb);
+	queue_for_each(rt2x00dev, queue) {
+		for (i = 0; i < queue->limit; i++) {
+			entry_priv = queue->entries[i].priv_data;
+			usb_kill_urb(entry_priv->urb);
+		}
 	}
 
 	/*
@@ -364,7 +320,7 @@ EXPORT_SYMBOL_GPL(rt2x00usb_disable_radio);
 void rt2x00usb_init_rxentry(struct rt2x00_dev *rt2x00dev,
 			    struct queue_entry *entry)
 {
-	struct usb_device *usb_dev = rt2x00dev_usb_dev(rt2x00dev);
+	struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev);
 	struct queue_entry_priv_usb *entry_priv = entry->priv_data;
 
 	usb_fill_bulk_urb(entry_priv->urb, usb_dev,
@@ -431,8 +387,6 @@ static void rt2x00usb_free_urb(struct rt2x00_dev *rt2x00dev,
 		entry_priv = queue->entries[i].priv_data;
 		usb_kill_urb(entry_priv->urb);
 		usb_free_urb(entry_priv->urb);
-		if (queue->entries[i].skb)
-			kfree_skb(queue->entries[i].skb);
 	}
 
 	/*
@@ -454,10 +408,7 @@ static void rt2x00usb_free_urb(struct rt2x00_dev *rt2x00dev,
 int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev)
 {
 	struct data_queue *queue;
-	struct sk_buff *skb;
-	unsigned int entry_size;
-	unsigned int i;
-	int uninitialized_var(status);
+	int status;
 
 	/*
 	 * Allocate DMA
@@ -468,18 +419,6 @@ int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev)
 			goto exit;
 	}
 
-	/*
-	 * For the RX queue, skb's should be allocated.
-	 */
-	entry_size = rt2x00dev->rx->data_size + rt2x00dev->rx->desc_size;
-	for (i = 0; i < rt2x00dev->rx->limit; i++) {
-		skb = rt2x00queue_alloc_rxskb(rt2x00dev->rx);
-		if (!skb)
-			goto exit;
-
-		rt2x00dev->rx->entries[i].skb = skb;
-	}
-
 	return 0;
 
 exit:
@@ -558,7 +497,7 @@ int rt2x00usb_probe(struct usb_interface *usb_intf,
 	usb_set_intfdata(usb_intf, hw);
 
 	rt2x00dev = hw->priv;
-	rt2x00dev->dev = usb_intf;
+	rt2x00dev->dev = &usb_intf->dev;
 	rt2x00dev->ops = ops;
 	rt2x00dev->hw = hw;
 	mutex_init(&rt2x00dev->usb_cache_mutex);
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h
index b1187c8..aad794ad 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.h
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.h
@@ -26,6 +26,12 @@
 #ifndef RT2X00USB_H
 #define RT2X00USB_H
 
+#define to_usb_device_intf(d) \
+({ \
+	struct usb_interface *intf = to_usb_interface(d); \
+	interface_to_usbdev(intf); \
+})
+
 /*
  * This variable should be used with the
  * usb_driver structure initialization.
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 5b7267e..bbf1048 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -1030,11 +1030,12 @@ static void rt61pci_init_rxentry(struct rt2x00_dev *rt2x00dev,
 				 struct queue_entry *entry)
 {
 	struct queue_entry_priv_pci *entry_priv = entry->priv_data;
+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 	u32 word;
 
 	rt2x00_desc_read(entry_priv->desc, 5, &word);
 	rt2x00_set_field32(&word, RXD_W5_BUFFER_PHYSICAL_ADDRESS,
-			   entry_priv->data_dma);
+			   skbdesc->skb_dma);
 	rt2x00_desc_write(entry_priv->desc, 5, word);
 
 	rt2x00_desc_read(entry_priv->desc, 0, &word);
@@ -1522,7 +1523,6 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 				    struct txentry_desc *txdesc)
 {
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
-	struct queue_entry_priv_pci *entry_priv = skbdesc->entry->priv_data;
 	__le32 *txd = skbdesc->desc;
 	u32 word;
 
@@ -1557,7 +1557,7 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 
 	rt2x00_desc_read(txd, 6, &word);
 	rt2x00_set_field32(&word, TXD_W6_BUFFER_PHYSICAL_ADDRESS,
-			   entry_priv->data_dma);
+			   skbdesc->skb_dma);
 	rt2x00_desc_write(txd, 6, word);
 
 	if (skbdesc->desc_len > TXINFO_SIZE) {
@@ -1767,7 +1767,7 @@ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev)
 			__set_bit(TXDONE_UNKNOWN, &txdesc.flags);
 			txdesc.retry = 0;
 
-			rt2x00pci_txdone(rt2x00dev, entry_done, &txdesc);
+			rt2x00lib_txdone(entry_done, &txdesc);
 			entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
 		}
 
@@ -1787,7 +1787,7 @@ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev)
 		}
 		txdesc.retry = rt2x00_get_field32(reg, STA_CSR4_RETRY_COUNT);
 
-		rt2x00pci_txdone(rt2x00dev, entry, &txdesc);
+		rt2x00lib_txdone(entry, &txdesc);
 	}
 }
 
@@ -1973,7 +1973,7 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	 * To determine the RT chip we have to read the
 	 * PCI header of the device.
 	 */
-	pci_read_config_word(rt2x00dev_pci(rt2x00dev),
+	pci_read_config_word(to_pci_dev(rt2x00dev->dev),
 			     PCI_CONFIG_HEADER_DEVICE, &device);
 	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
 	rt2x00pci_register_read(rt2x00dev, MAC_CSR0, &reg);
@@ -2239,7 +2239,7 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	    IEEE80211_HW_SIGNAL_DBM;
 	rt2x00dev->hw->extra_tx_headroom = 0;
 
-	SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev);
+	SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
 	SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
 				rt2x00_eeprom_addr(rt2x00dev,
 						   EEPROM_MAC_ADDR_0));
@@ -2302,9 +2302,10 @@ static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 	rt61pci_probe_hw_mode(rt2x00dev);
 
 	/*
-	 * This device requires firmware.
+	 * This device requires firmware and DMA mapped skbs.
 	 */
 	__set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
+	__set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags);
 
 	/*
 	 * Set the rssi offset.
@@ -2402,6 +2403,12 @@ static int rt61pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
 				      skb->data, skb->len);
 	rt61pci_kick_tx_queue(rt2x00dev, QID_BEACON);
 
+	/*
+	 * Clean up beacon skb.
+	 */
+	dev_kfree_skb_any(skb);
+	intf->beacon->skb = NULL;
+
 	return 0;
 }
 
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 675ff79..3ef318e 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -1827,7 +1827,7 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	    IEEE80211_HW_SIGNAL_DBM;
 	rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;
 
-	SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_usb(rt2x00dev)->dev);
+	SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
 	SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
 				rt2x00_eeprom_addr(rt2x00dev,
 						   EEPROM_MAC_ADDR_0));
@@ -2007,6 +2007,12 @@ static int rt73usb_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
 				 REGISTER_TIMEOUT32(skb->len));
 	rt73usb_kick_tx_queue(rt2x00dev, QID_BEACON);
 
+	/*
+	 * Clean up the beacon skb.
+	 */
+	dev_kfree_skb(skb);
+	intf->beacon->skb = NULL;
+
 	return 0;
 }
 
diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c
deleted file mode 100644
index 883af89..0000000
--- a/drivers/net/wireless/strip.c
+++ /dev/null
@@ -1,2804 +0,0 @@
-/*
- * Copyright 1996 The Board of Trustees of The Leland Stanford
- * Junior University. All Rights Reserved.
- *
- * Permission to use, copy, modify, and distribute this
- * software and its documentation for any purpose and without
- * fee is hereby granted, provided that the above copyright
- * notice appear in all copies.  Stanford University
- * makes no representations about the suitability of this
- * software for any purpose.  It is provided "as is" without
- * express or implied warranty.
- *
- * strip.c	This module implements Starmode Radio IP (STRIP)
- *		for kernel-based devices like TTY.  It interfaces between a
- *		raw TTY, and the kernel's INET protocol layers (via DDI).
- *
- * Version:	@(#)strip.c	1.3	July 1997
- *
- * Author:	Stuart Cheshire <cheshire@cs.stanford.edu>
- *
- * Fixes:	v0.9 12th Feb 1996 (SC)
- *		New byte stuffing (2+6 run-length encoding)
- *		New watchdog timer task
- *		New Protocol key (SIP0)
- *		
- *		v0.9.1 3rd March 1996 (SC)
- *		Changed to dynamic device allocation -- no more compile
- *		time (or boot time) limit on the number of STRIP devices.
- *		
- *		v0.9.2 13th March 1996 (SC)
- *		Uses arp cache lookups (but doesn't send arp packets yet)
- *		
- *		v0.9.3 17th April 1996 (SC)
- *		Fixed bug where STR_ERROR flag was getting set unneccessarily
- *		(causing otherwise good packets to be unneccessarily dropped)
- *		
- *		v0.9.4 27th April 1996 (SC)
- *		First attempt at using "&COMMAND" Starmode AT commands
- *		
- *		v0.9.5 29th May 1996 (SC)
- *		First attempt at sending (unicast) ARP packets
- *		
- *		v0.9.6 5th June 1996 (Elliot)
- *		Put "message level" tags in every "printk" statement
- *		
- *		v0.9.7 13th June 1996 (laik)
- *		Added support for the /proc fs
- *
- *              v0.9.8 July 1996 (Mema)
- *              Added packet logging
- *
- *              v1.0 November 1996 (SC)
- *              Fixed (severe) memory leaks in the /proc fs code
- *              Fixed race conditions in the logging code
- *
- *              v1.1 January 1997 (SC)
- *              Deleted packet logging (use tcpdump instead)
- *              Added support for Metricom Firmware v204 features
- *              (like message checksums)
- *
- *              v1.2 January 1997 (SC)
- *              Put portables list back in
- *
- *              v1.3 July 1997 (SC)
- *              Made STRIP driver set the radio's baud rate automatically.
- *              It is no longer necessarily to manually set the radio's
- *              rate permanently to 115200 -- the driver handles setting
- *              the rate automatically.
- */
-
-#ifdef MODULE
-static const char StripVersion[] = "1.3A-STUART.CHESHIRE-MODULAR";
-#else
-static const char StripVersion[] = "1.3A-STUART.CHESHIRE";
-#endif
-
-#define TICKLE_TIMERS 0
-#define EXT_COUNTERS 1
-
-
-/************************************************************************/
-/* Header files								*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-#include <asm/system.h>
-#include <asm/uaccess.h>
-
-# include <linux/ctype.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/in.h>
-#include <linux/tty.h>
-#include <linux/errno.h>
-#include <linux/netdevice.h>
-#include <linux/inetdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/if_arp.h>
-#include <linux/if_strip.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/rcupdate.h>
-#include <net/arp.h>
-#include <net/net_namespace.h>
-
-#include <linux/ip.h>
-#include <linux/tcp.h>
-#include <linux/time.h>
-#include <linux/jiffies.h>
-
-/************************************************************************/
-/* Useful structures and definitions					*/
-
-/*
- * A MetricomKey identifies the protocol being carried inside a Metricom
- * Starmode packet.
- */
-
-typedef union {
-	__u8 c[4];
-	__u32 l;
-} MetricomKey;
-
-/*
- * An IP address can be viewed as four bytes in memory (which is what it is) or as
- * a single 32-bit long (which is convenient for assignment, equality testing etc.)
- */
-
-typedef union {
-	__u8 b[4];
-	__u32 l;
-} IPaddr;
-
-/*
- * A MetricomAddressString is used to hold a printable representation of
- * a Metricom address.
- */
-
-typedef struct {
-	__u8 c[24];
-} MetricomAddressString;
-
-/* Encapsulation can expand packet of size x to 65/64x + 1
- * Sent packet looks like "<CR>*<address>*<key><encaps payload><CR>"
- *                           1 1   1-18  1  4         ?         1
- * eg.                     <CR>*0000-1234*SIP0<encaps payload><CR>
- * We allow 31 bytes for the stars, the key, the address and the <CR>s
- */
-#define STRIP_ENCAP_SIZE(X) (32 + (X)*65L/64L)
-
-/*
- * A STRIP_Header is never really sent over the radio, but making a dummy
- * header for internal use within the kernel that looks like an Ethernet
- * header makes certain other software happier. For example, tcpdump
- * already understands Ethernet headers.
- */
-
-typedef struct {
-	MetricomAddress dst_addr;	/* Destination address, e.g. "0000-1234"   */
-	MetricomAddress src_addr;	/* Source address, e.g. "0000-5678"        */
-	unsigned short protocol;	/* The protocol type, using Ethernet codes */
-} STRIP_Header;
-
-typedef struct {
-	char c[60];
-} MetricomNode;
-
-#define NODE_TABLE_SIZE 32
-typedef struct {
-	struct timeval timestamp;
-	int num_nodes;
-	MetricomNode node[NODE_TABLE_SIZE];
-} MetricomNodeTable;
-
-enum { FALSE = 0, TRUE = 1 };
-
-/*
- * Holds the radio's firmware version.
- */
-typedef struct {
-	char c[50];
-} FirmwareVersion;
-
-/*
- * Holds the radio's serial number.
- */
-typedef struct {
-	char c[18];
-} SerialNumber;
-
-/*
- * Holds the radio's battery voltage.
- */
-typedef struct {
-	char c[11];
-} BatteryVoltage;
-
-typedef struct {
-	char c[8];
-} char8;
-
-enum {
-	NoStructure = 0,	/* Really old firmware */
-	StructuredMessages = 1,	/* Parsable AT response msgs */
-	ChecksummedMessages = 2	/* Parsable AT response msgs with checksums */
-};
-
-struct strip {
-	int magic;
-	/*
-	 * These are pointers to the malloc()ed frame buffers.
-	 */
-
-	unsigned char *rx_buff;	/* buffer for received IP packet */
-	unsigned char *sx_buff;	/* buffer for received serial data */
-	int sx_count;		/* received serial data counter */
-	int sx_size;		/* Serial buffer size           */
-	unsigned char *tx_buff;	/* transmitter buffer           */
-	unsigned char *tx_head;	/* pointer to next byte to XMIT */
-	int tx_left;		/* bytes left in XMIT queue     */
-	int tx_size;		/* Serial buffer size           */
-
-	/*
-	 * STRIP interface statistics.
-	 */
-
-	unsigned long rx_packets;	/* inbound frames counter       */
-	unsigned long tx_packets;	/* outbound frames counter      */
-	unsigned long rx_errors;	/* Parity, etc. errors          */
-	unsigned long tx_errors;	/* Planned stuff                */
-	unsigned long rx_dropped;	/* No memory for skb            */
-	unsigned long tx_dropped;	/* When MTU change              */
-	unsigned long rx_over_errors;	/* Frame bigger then STRIP buf. */
-
-	unsigned long pps_timer;	/* Timer to determine pps       */
-	unsigned long rx_pps_count;	/* Counter to determine pps     */
-	unsigned long tx_pps_count;	/* Counter to determine pps     */
-	unsigned long sx_pps_count;	/* Counter to determine pps     */
-	unsigned long rx_average_pps;	/* rx packets per second * 8    */
-	unsigned long tx_average_pps;	/* tx packets per second * 8    */
-	unsigned long sx_average_pps;	/* sent packets per second * 8  */
-
-#ifdef EXT_COUNTERS
-	unsigned long rx_bytes;		/* total received bytes */
-	unsigned long tx_bytes;		/* total received bytes */
-	unsigned long rx_rbytes;	/* bytes thru radio i/f */
-	unsigned long tx_rbytes;	/* bytes thru radio i/f */
-	unsigned long rx_sbytes;	/* tot bytes thru serial i/f */
-	unsigned long tx_sbytes;	/* tot bytes thru serial i/f */
-	unsigned long rx_ebytes;	/* tot stat/err bytes */
-	unsigned long tx_ebytes;	/* tot stat/err bytes */
-#endif
-
-	/*
-	 * Internal variables.
-	 */
-
-	struct list_head  list;		/* Linked list of devices */
-
-	int discard;			/* Set if serial error          */
-	int working;			/* Is radio working correctly?  */
-	int firmware_level;		/* Message structuring level    */
-	int next_command;		/* Next periodic command        */
-	unsigned int user_baud;		/* The user-selected baud rate  */
-	int mtu;			/* Our mtu (to spot changes!)   */
-	long watchdog_doprobe;		/* Next time to test the radio  */
-	long watchdog_doreset;		/* Time to do next reset        */
-	long gratuitous_arp;		/* Time to send next ARP refresh */
-	long arp_interval;		/* Next ARP interval            */
-	struct timer_list idle_timer;	/* For periodic wakeup calls    */
-	MetricomAddress true_dev_addr;	/* True address of radio        */
-	int manual_dev_addr;		/* Hack: See note below         */
-
-	FirmwareVersion firmware_version;	/* The radio's firmware version */
-	SerialNumber serial_number;	/* The radio's serial number    */
-	BatteryVoltage battery_voltage;	/* The radio's battery voltage  */
-
-	/*
-	 * Other useful structures.
-	 */
-
-	struct tty_struct *tty;		/* ptr to TTY structure         */
-	struct net_device *dev;		/* Our device structure         */
-
-	/*
-	 * Neighbour radio records
-	 */
-
-	MetricomNodeTable portables;
-	MetricomNodeTable poletops;
-};
-
-/*
- * Note: manual_dev_addr hack
- * 
- * It is not possible to change the hardware address of a Metricom radio,
- * or to send packets with a user-specified hardware source address, thus
- * trying to manually set a hardware source address is a questionable
- * thing to do.  However, if the user *does* manually set the hardware
- * source address of a STRIP interface, then the kernel will believe it,
- * and use it in certain places. For example, the hardware address listed
- * by ifconfig will be the manual address, not the true one.
- * (Both addresses are listed in /proc/net/strip.)
- * Also, ARP packets will be sent out giving the user-specified address as
- * the source address, not the real address. This is dangerous, because
- * it means you won't receive any replies -- the ARP replies will go to
- * the specified address, which will be some other radio. The case where
- * this is useful is when that other radio is also connected to the same
- * machine. This allows you to connect a pair of radios to one machine,
- * and to use one exclusively for inbound traffic, and the other
- * exclusively for outbound traffic. Pretty neat, huh?
- * 
- * Here's the full procedure to set this up:
- * 
- * 1. "slattach" two interfaces, e.g. st0 for outgoing packets,
- *    and st1 for incoming packets
- * 
- * 2. "ifconfig" st0 (outbound radio) to have the hardware address
- *    which is the real hardware address of st1 (inbound radio).
- *    Now when it sends out packets, it will masquerade as st1, and
- *    replies will be sent to that radio, which is exactly what we want.
- * 
- * 3. Set the route table entry ("route add default ..." or
- *    "route add -net ...", as appropriate) to send packets via the st0
- *    interface (outbound radio). Do not add any route which sends packets
- *    out via the st1 interface -- that radio is for inbound traffic only.
- * 
- * 4. "ifconfig" st1 (inbound radio) to have hardware address zero.
- *    This tells the STRIP driver to "shut down" that interface and not
- *    send any packets through it. In particular, it stops sending the
- *    periodic gratuitous ARP packets that a STRIP interface normally sends.
- *    Also, when packets arrive on that interface, it will search the
- *    interface list to see if there is another interface who's manual
- *    hardware address matches its own real address (i.e. st0 in this
- *    example) and if so it will transfer ownership of the skbuff to
- *    that interface, so that it looks to the kernel as if the packet
- *    arrived on that interface. This is necessary because when the
- *    kernel sends an ARP packet on st0, it expects to get a reply on
- *    st0, and if it sees the reply come from st1 then it will ignore
- *    it (to be accurate, it puts the entry in the ARP table, but
- *    labelled in such a way that st0 can't use it).
- * 
- * Thanks to Petros Maniatis for coming up with the idea of splitting
- * inbound and outbound traffic between two interfaces, which turned
- * out to be really easy to implement, even if it is a bit of a hack.
- * 
- * Having set a manual address on an interface, you can restore it
- * to automatic operation (where the address is automatically kept
- * consistent with the real address of the radio) by setting a manual
- * address of all ones, e.g. "ifconfig st0 hw strip FFFFFFFFFFFF"
- * This 'turns off' manual override mode for the device address.
- * 
- * Note: The IEEE 802 headers reported in tcpdump will show the *real*
- * radio addresses the packets were sent and received from, so that you
- * can see what is really going on with packets, and which interfaces
- * they are really going through.
- */
-
-
-/************************************************************************/
-/* Constants								*/
-
-/*
- * CommandString1 works on all radios
- * Other CommandStrings are only used with firmware that provides structured responses.
- * 
- * ats319=1 Enables Info message for node additions and deletions
- * ats319=2 Enables Info message for a new best node
- * ats319=4 Enables checksums
- * ats319=8 Enables ACK messages
- */
-
-static const int MaxCommandStringLength = 32;
-static const int CompatibilityCommand = 1;
-
-static const char CommandString0[] = "*&COMMAND*ATS319=7";	/* Turn on checksums & info messages */
-static const char CommandString1[] = "*&COMMAND*ATS305?";	/* Query radio name */
-static const char CommandString2[] = "*&COMMAND*ATS325?";	/* Query battery voltage */
-static const char CommandString3[] = "*&COMMAND*ATS300?";	/* Query version information */
-static const char CommandString4[] = "*&COMMAND*ATS311?";	/* Query poletop list */
-static const char CommandString5[] = "*&COMMAND*AT~LA";		/* Query portables list */
-typedef struct {
-	const char *string;
-	long length;
-} StringDescriptor;
-
-static const StringDescriptor CommandString[] = {
-	{CommandString0, sizeof(CommandString0) - 1},
-	{CommandString1, sizeof(CommandString1) - 1},
-	{CommandString2, sizeof(CommandString2) - 1},
-	{CommandString3, sizeof(CommandString3) - 1},
-	{CommandString4, sizeof(CommandString4) - 1},
-	{CommandString5, sizeof(CommandString5) - 1}
-};
-
-#define GOT_ALL_RADIO_INFO(S)      \
-    ((S)->firmware_version.c[0] && \
-     (S)->battery_voltage.c[0]  && \
-     memcmp(&(S)->true_dev_addr, zero_address.c, sizeof(zero_address)))
-
-static const char hextable[16] = "0123456789ABCDEF";
-
-static const MetricomAddress zero_address;
-static const MetricomAddress broadcast_address =
-    { {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF} };
-
-static const MetricomKey SIP0Key = { "SIP0" };
-static const MetricomKey ARP0Key = { "ARP0" };
-static const MetricomKey ATR_Key = { "ATR " };
-static const MetricomKey ACK_Key = { "ACK_" };
-static const MetricomKey INF_Key = { "INF_" };
-static const MetricomKey ERR_Key = { "ERR_" };
-
-static const long MaxARPInterval = 60 * HZ;	/* One minute */
-
-/*
- * Maximum Starmode packet length is 1183 bytes. Allowing 4 bytes for
- * protocol key, 4 bytes for checksum, one byte for CR, and 65/64 expansion
- * for STRIP encoding, that translates to a maximum payload MTU of 1155.
- * Note: A standard NFS 1K data packet is a total of 0x480 (1152) bytes
- * long, including IP header, UDP header, and NFS header. Setting the STRIP
- * MTU to 1152 allows us to send default sized NFS packets without fragmentation.
- */
-static const unsigned short MAX_SEND_MTU = 1152;
-static const unsigned short MAX_RECV_MTU = 1500;	/* Hoping for Ethernet sized packets in the future! */
-static const unsigned short DEFAULT_STRIP_MTU = 1152;
-static const int STRIP_MAGIC = 0x5303;
-static const long LongTime = 0x7FFFFFFF;
-
-/************************************************************************/
-/* Global variables							*/
-
-static LIST_HEAD(strip_list);
-static DEFINE_SPINLOCK(strip_lock);
-
-/************************************************************************/
-/* Macros								*/
-
-/* Returns TRUE if text T begins with prefix P */
-#define has_prefix(T,L,P) (((L) >= sizeof(P)-1) && !strncmp((T), (P), sizeof(P)-1))
-
-/* Returns TRUE if text T of length L is equal to string S */
-#define text_equal(T,L,S) (((L) == sizeof(S)-1) && !strncmp((T), (S), sizeof(S)-1))
-
-#define READHEX(X) ((X)>='0' && (X)<='9' ? (X)-'0' :      \
-                    (X)>='a' && (X)<='f' ? (X)-'a'+10 :   \
-                    (X)>='A' && (X)<='F' ? (X)-'A'+10 : 0 )
-
-#define READHEX16(X) ((__u16)(READHEX(X)))
-
-#define READDEC(X) ((X)>='0' && (X)<='9' ? (X)-'0' : 0)
-
-#define ARRAY_END(X) (&((X)[ARRAY_SIZE(X)]))
-
-#define JIFFIE_TO_SEC(X) ((X) / HZ)
-
-
-/************************************************************************/
-/* Utility routines							*/
-
-static int arp_query(unsigned char *haddr, u32 paddr,
-		     struct net_device *dev)
-{
-	struct neighbour *neighbor_entry;
-	int ret = 0;
-
-	neighbor_entry = neigh_lookup(&arp_tbl, &paddr, dev);
-
-	if (neighbor_entry != NULL) {
-		neighbor_entry->used = jiffies;
-		if (neighbor_entry->nud_state & NUD_VALID) {
-			memcpy(haddr, neighbor_entry->ha, dev->addr_len);
-			ret = 1;
-		}
-		neigh_release(neighbor_entry);
-	}
-	return ret;
-}
-
-static void DumpData(char *msg, struct strip *strip_info, __u8 * ptr,
-		     __u8 * end)
-{
-	static const int MAX_DumpData = 80;
-	__u8 pkt_text[MAX_DumpData], *p = pkt_text;
-
-	*p++ = '\"';
-
-	while (ptr < end && p < &pkt_text[MAX_DumpData - 4]) {
-		if (*ptr == '\\') {
-			*p++ = '\\';
-			*p++ = '\\';
-		} else {
-			if (*ptr >= 32 && *ptr <= 126) {
-				*p++ = *ptr;
-			} else {
-				sprintf(p, "\\%02X", *ptr);
-				p += 3;
-			}
-		}
-		ptr++;
-	}
-
-	if (ptr == end)
-		*p++ = '\"';
-	*p++ = 0;
-
-	printk(KERN_INFO "%s: %-13s%s\n", strip_info->dev->name, msg, pkt_text);
-}
-
-
-/************************************************************************/
-/* Byte stuffing/unstuffing routines					*/
-
-/* Stuffing scheme:
- * 00    Unused (reserved character)
- * 01-3F Run of 2-64 different characters
- * 40-7F Run of 1-64 different characters plus a single zero at the end
- * 80-BF Run of 1-64 of the same character
- * C0-FF Run of 1-64 zeroes (ASCII 0)
- */
-
-typedef enum {
-	Stuff_Diff = 0x00,
-	Stuff_DiffZero = 0x40,
-	Stuff_Same = 0x80,
-	Stuff_Zero = 0xC0,
-	Stuff_NoCode = 0xFF,	/* Special code, meaning no code selected */
-
-	Stuff_CodeMask = 0xC0,
-	Stuff_CountMask = 0x3F,
-	Stuff_MaxCount = 0x3F,
-	Stuff_Magic = 0x0D	/* The value we are eliminating */
-} StuffingCode;
-
-/* StuffData encodes the data starting at "src" for "length" bytes.
- * It writes it to the buffer pointed to by "dst" (which must be at least
- * as long as 1 + 65/64 of the input length). The output may be up to 1.6%
- * larger than the input for pathological input, but will usually be smaller.
- * StuffData returns the new value of the dst pointer as its result.
- * "code_ptr_ptr" points to a "__u8 *" which is used to hold encoding state
- * between calls, allowing an encoded packet to be incrementally built up
- * from small parts. On the first call, the "__u8 *" pointed to should be
- * initialized to NULL; between subsequent calls the calling routine should
- * leave the value alone and simply pass it back unchanged so that the
- * encoder can recover its current state.
- */
-
-#define StuffData_FinishBlock(X) \
-(*code_ptr = (X) ^ Stuff_Magic, code = Stuff_NoCode)
-
-static __u8 *StuffData(__u8 * src, __u32 length, __u8 * dst,
-		       __u8 ** code_ptr_ptr)
-{
-	__u8 *end = src + length;
-	__u8 *code_ptr = *code_ptr_ptr;
-	__u8 code = Stuff_NoCode, count = 0;
-
-	if (!length)
-		return (dst);
-
-	if (code_ptr) {
-		/*
-		 * Recover state from last call, if applicable
-		 */
-		code = (*code_ptr ^ Stuff_Magic) & Stuff_CodeMask;
-		count = (*code_ptr ^ Stuff_Magic) & Stuff_CountMask;
-	}
-
-	while (src < end) {
-		switch (code) {
-			/* Stuff_NoCode: If no current code, select one */
-		case Stuff_NoCode:
-			/* Record where we're going to put this code */
-			code_ptr = dst++;
-			count = 0;	/* Reset the count (zero means one instance) */
-			/* Tentatively start a new block */
-			if (*src == 0) {
-				code = Stuff_Zero;
-				src++;
-			} else {
-				code = Stuff_Same;
-				*dst++ = *src++ ^ Stuff_Magic;
-			}
-			/* Note: We optimistically assume run of same -- */
-			/* which will be fixed later in Stuff_Same */
-			/* if it turns out not to be true. */
-			break;
-
-			/* Stuff_Zero: We already have at least one zero encoded */
-		case Stuff_Zero:
-			/* If another zero, count it, else finish this code block */
-			if (*src == 0) {
-				count++;
-				src++;
-			} else {
-				StuffData_FinishBlock(Stuff_Zero + count);
-			}
-			break;
-
-			/* Stuff_Same: We already have at least one byte encoded */
-		case Stuff_Same:
-			/* If another one the same, count it */
-			if ((*src ^ Stuff_Magic) == code_ptr[1]) {
-				count++;
-				src++;
-				break;
-			}
-			/* else, this byte does not match this block. */
-			/* If we already have two or more bytes encoded, finish this code block */
-			if (count) {
-				StuffData_FinishBlock(Stuff_Same + count);
-				break;
-			}
-			/* else, we only have one so far, so switch to Stuff_Diff code */
-			code = Stuff_Diff;
-			/* and fall through to Stuff_Diff case below
-			 * Note cunning cleverness here: case Stuff_Diff compares 
-			 * the current character with the previous two to see if it
-			 * has a run of three the same. Won't this be an error if
-			 * there aren't two previous characters stored to compare with?
-			 * No. Because we know the current character is *not* the same
-			 * as the previous one, the first test below will necessarily
-			 * fail and the send half of the "if" won't be executed.
-			 */
-
-			/* Stuff_Diff: We have at least two *different* bytes encoded */
-		case Stuff_Diff:
-			/* If this is a zero, must encode a Stuff_DiffZero, and begin a new block */
-			if (*src == 0) {
-				StuffData_FinishBlock(Stuff_DiffZero +
-						      count);
-			}
-			/* else, if we have three in a row, it is worth starting a Stuff_Same block */
-			else if ((*src ^ Stuff_Magic) == dst[-1]
-				 && dst[-1] == dst[-2]) {
-				/* Back off the last two characters we encoded */
-				code += count - 2;
-				/* Note: "Stuff_Diff + 0" is an illegal code */
-				if (code == Stuff_Diff + 0) {
-					code = Stuff_Same + 0;
-				}
-				StuffData_FinishBlock(code);
-				code_ptr = dst - 2;
-				/* dst[-1] already holds the correct value */
-				count = 2;	/* 2 means three bytes encoded */
-				code = Stuff_Same;
-			}
-			/* else, another different byte, so add it to the block */
-			else {
-				*dst++ = *src ^ Stuff_Magic;
-				count++;
-			}
-			src++;	/* Consume the byte */
-			break;
-		}
-		if (count == Stuff_MaxCount) {
-			StuffData_FinishBlock(code + count);
-		}
-	}
-	if (code == Stuff_NoCode) {
-		*code_ptr_ptr = NULL;
-	} else {
-		*code_ptr_ptr = code_ptr;
-		StuffData_FinishBlock(code + count);
-	}
-	return (dst);
-}
-
-/*
- * UnStuffData decodes the data at "src", up to (but not including) "end".
- * It writes the decoded data into the buffer pointed to by "dst", up to a
- * maximum of "dst_length", and returns the new value of "src" so that a
- * follow-on call can read more data, continuing from where the first left off.
- * 
- * There are three types of results:
- * 1. The source data runs out before extracting "dst_length" bytes:
- *    UnStuffData returns NULL to indicate failure.
- * 2. The source data produces exactly "dst_length" bytes:
- *    UnStuffData returns new_src = end to indicate that all bytes were consumed.
- * 3. "dst_length" bytes are extracted, with more remaining.
- *    UnStuffData returns new_src < end to indicate that there are more bytes
- *    to be read.
- * 
- * Note: The decoding may be destructive, in that it may alter the source
- * data in the process of decoding it (this is necessary to allow a follow-on
- * call to resume correctly).
- */
-
-static __u8 *UnStuffData(__u8 * src, __u8 * end, __u8 * dst,
-			 __u32 dst_length)
-{
-	__u8 *dst_end = dst + dst_length;
-	/* Sanity check */
-	if (!src || !end || !dst || !dst_length)
-		return (NULL);
-	while (src < end && dst < dst_end) {
-		int count = (*src ^ Stuff_Magic) & Stuff_CountMask;
-		switch ((*src ^ Stuff_Magic) & Stuff_CodeMask) {
-		case Stuff_Diff:
-			if (src + 1 + count >= end)
-				return (NULL);
-			do {
-				*dst++ = *++src ^ Stuff_Magic;
-			}
-			while (--count >= 0 && dst < dst_end);
-			if (count < 0)
-				src += 1;
-			else {
-				if (count == 0)
-					*src = Stuff_Same ^ Stuff_Magic;
-				else
-					*src =
-					    (Stuff_Diff +
-					     count) ^ Stuff_Magic;
-			}
-			break;
-		case Stuff_DiffZero:
-			if (src + 1 + count >= end)
-				return (NULL);
-			do {
-				*dst++ = *++src ^ Stuff_Magic;
-			}
-			while (--count >= 0 && dst < dst_end);
-			if (count < 0)
-				*src = Stuff_Zero ^ Stuff_Magic;
-			else
-				*src =
-				    (Stuff_DiffZero + count) ^ Stuff_Magic;
-			break;
-		case Stuff_Same:
-			if (src + 1 >= end)
-				return (NULL);
-			do {
-				*dst++ = src[1] ^ Stuff_Magic;
-			}
-			while (--count >= 0 && dst < dst_end);
-			if (count < 0)
-				src += 2;
-			else
-				*src = (Stuff_Same + count) ^ Stuff_Magic;
-			break;
-		case Stuff_Zero:
-			do {
-				*dst++ = 0;
-			}
-			while (--count >= 0 && dst < dst_end);
-			if (count < 0)
-				src += 1;
-			else
-				*src = (Stuff_Zero + count) ^ Stuff_Magic;
-			break;
-		}
-	}
-	if (dst < dst_end)
-		return (NULL);
-	else
-		return (src);
-}
-
-
-/************************************************************************/
-/* General routines for STRIP						*/
-
-/*
- * set_baud sets the baud rate to the rate defined by baudcode
- */
-static void set_baud(struct tty_struct *tty, speed_t baudrate)
-{
-	struct ktermios old_termios;
-
-	mutex_lock(&tty->termios_mutex);
-	old_termios =*(tty->termios);
-	tty_encode_baud_rate(tty, baudrate, baudrate);
-	tty->ops->set_termios(tty, &old_termios);
-	mutex_unlock(&tty->termios_mutex);
-}
-
-/*
- * Convert a string to a Metricom Address.
- */
-
-#define IS_RADIO_ADDRESS(p) (                                                 \
-  isdigit((p)[0]) && isdigit((p)[1]) && isdigit((p)[2]) && isdigit((p)[3]) && \
-  (p)[4] == '-' &&                                                            \
-  isdigit((p)[5]) && isdigit((p)[6]) && isdigit((p)[7]) && isdigit((p)[8])    )
-
-static int string_to_radio_address(MetricomAddress * addr, __u8 * p)
-{
-	if (!IS_RADIO_ADDRESS(p))
-		return (1);
-	addr->c[0] = 0;
-	addr->c[1] = 0;
-	addr->c[2] = READHEX(p[0]) << 4 | READHEX(p[1]);
-	addr->c[3] = READHEX(p[2]) << 4 | READHEX(p[3]);
-	addr->c[4] = READHEX(p[5]) << 4 | READHEX(p[6]);
-	addr->c[5] = READHEX(p[7]) << 4 | READHEX(p[8]);
-	return (0);
-}
-
-/*
- * Convert a Metricom Address to a string.
- */
-
-static __u8 *radio_address_to_string(const MetricomAddress * addr,
-				     MetricomAddressString * p)
-{
-	sprintf(p->c, "%02X%02X-%02X%02X", addr->c[2], addr->c[3],
-		addr->c[4], addr->c[5]);
-	return (p->c);
-}
-
-/*
- * Note: Must make sure sx_size is big enough to receive a stuffed
- * MAX_RECV_MTU packet. Additionally, we also want to ensure that it's
- * big enough to receive a large radio neighbour list (currently 4K).
- */
-
-static int allocate_buffers(struct strip *strip_info, int mtu)
-{
-	struct net_device *dev = strip_info->dev;
-	int sx_size = max_t(int, STRIP_ENCAP_SIZE(MAX_RECV_MTU), 4096);
-	int tx_size = STRIP_ENCAP_SIZE(mtu) + MaxCommandStringLength;
-	__u8 *r = kmalloc(MAX_RECV_MTU, GFP_ATOMIC);
-	__u8 *s = kmalloc(sx_size, GFP_ATOMIC);
-	__u8 *t = kmalloc(tx_size, GFP_ATOMIC);
-	if (r && s && t) {
-		strip_info->rx_buff = r;
-		strip_info->sx_buff = s;
-		strip_info->tx_buff = t;
-		strip_info->sx_size = sx_size;
-		strip_info->tx_size = tx_size;
-		strip_info->mtu = dev->mtu = mtu;
-		return (1);
-	}
-	kfree(r);
-	kfree(s);
-	kfree(t);
-	return (0);
-}
-
-/*
- * MTU has been changed by the IP layer. 
- * We could be in
- * an upcall from the tty driver, or in an ip packet queue.
- */
-static int strip_change_mtu(struct net_device *dev, int new_mtu)
-{
-	struct strip *strip_info = netdev_priv(dev);
-	int old_mtu = strip_info->mtu;
-	unsigned char *orbuff = strip_info->rx_buff;
-	unsigned char *osbuff = strip_info->sx_buff;
-	unsigned char *otbuff = strip_info->tx_buff;
-
-	if (new_mtu > MAX_SEND_MTU) {
-		printk(KERN_ERR
-		       "%s: MTU exceeds maximum allowable (%d), MTU change cancelled.\n",
-		       strip_info->dev->name, MAX_SEND_MTU);
-		return -EINVAL;
-	}
-
-	spin_lock_bh(&strip_lock);
-	if (!allocate_buffers(strip_info, new_mtu)) {
-		printk(KERN_ERR "%s: unable to grow strip buffers, MTU change cancelled.\n",
-		       strip_info->dev->name);
-		spin_unlock_bh(&strip_lock);
-		return -ENOMEM;
-	}
-
-	if (strip_info->sx_count) {
-		if (strip_info->sx_count <= strip_info->sx_size)
-			memcpy(strip_info->sx_buff, osbuff,
-			       strip_info->sx_count);
-		else {
-			strip_info->discard = strip_info->sx_count;
-			strip_info->rx_over_errors++;
-		}
-	}
-
-	if (strip_info->tx_left) {
-		if (strip_info->tx_left <= strip_info->tx_size)
-			memcpy(strip_info->tx_buff, strip_info->tx_head,
-			       strip_info->tx_left);
-		else {
-			strip_info->tx_left = 0;
-			strip_info->tx_dropped++;
-		}
-	}
-	strip_info->tx_head = strip_info->tx_buff;
-	spin_unlock_bh(&strip_lock);
-
-	printk(KERN_NOTICE "%s: strip MTU changed fom %d to %d.\n",
-	       strip_info->dev->name, old_mtu, strip_info->mtu);
-
-	kfree(orbuff);
-	kfree(osbuff);
-	kfree(otbuff);
-	return 0;
-}
-
-static void strip_unlock(struct strip *strip_info)
-{
-	/*
-	 * Set the timer to go off in one second.
-	 */
-	strip_info->idle_timer.expires = jiffies + 1 * HZ;
-	add_timer(&strip_info->idle_timer);
-	netif_wake_queue(strip_info->dev);
-}
-
-
-
-/*
- * If the time is in the near future, time_delta prints the number of
- * seconds to go into the buffer and returns the address of the buffer.
- * If the time is not in the near future, it returns the address of the
- * string "Not scheduled" The buffer must be long enough to contain the
- * ascii representation of the number plus 9 charactes for the " seconds"
- * and the null character.
- */
-#ifdef CONFIG_PROC_FS
-static char *time_delta(char buffer[], long time)
-{
-	time -= jiffies;
-	if (time > LongTime / 2)
-		return ("Not scheduled");
-	if (time < 0)
-		time = 0;	/* Don't print negative times */
-	sprintf(buffer, "%ld seconds", time / HZ);
-	return (buffer);
-}
-
-/* get Nth element of the linked list */
-static struct strip *strip_get_idx(loff_t pos) 
-{
-	struct strip *str;
-	int i = 0;
-
-	list_for_each_entry_rcu(str, &strip_list, list) {
-		if (pos == i)
-			return str;
-		++i;
-	}
-	return NULL;
-}
-
-static void *strip_seq_start(struct seq_file *seq, loff_t *pos)
-{
-	rcu_read_lock();
-	return *pos ? strip_get_idx(*pos - 1) : SEQ_START_TOKEN;
-}
-
-static void *strip_seq_next(struct seq_file *seq, void *v, loff_t *pos)
-{
-	struct list_head *l;
-	struct strip *s;
-
-	++*pos;
-	if (v == SEQ_START_TOKEN)
-		return strip_get_idx(1);
-
-	s = v;
-	l = &s->list;
-	list_for_each_continue_rcu(l, &strip_list) {
-		return list_entry(l, struct strip, list);
-	}
-	return NULL;
-}
-
-static void strip_seq_stop(struct seq_file *seq, void *v)
-{
-	rcu_read_unlock();
-}
-
-static void strip_seq_neighbours(struct seq_file *seq,
-			   const MetricomNodeTable * table,
-			   const char *title)
-{
-	/* We wrap this in a do/while loop, so if the table changes */
-	/* while we're reading it, we just go around and try again. */
-	struct timeval t;
-
-	do {
-		int i;
-		t = table->timestamp;
-		if (table->num_nodes)
-			seq_printf(seq, "\n %s\n", title);
-		for (i = 0; i < table->num_nodes; i++) {
-			MetricomNode node;
-
-			spin_lock_bh(&strip_lock);
-			node = table->node[i];
-			spin_unlock_bh(&strip_lock);
-			seq_printf(seq, "  %s\n", node.c);
-		}
-	} while (table->timestamp.tv_sec != t.tv_sec
-		 || table->timestamp.tv_usec != t.tv_usec);
-}
-
-/*
- * This function prints radio status information via the seq_file
- * interface.  The interface takes care of buffer size and over
- * run issues. 
- *
- * The buffer in seq_file is PAGESIZE (4K) 
- * so this routine should never print more or it will get truncated.
- * With the maximum of 32 portables and 32 poletops
- * reported, the routine outputs 3107 bytes into the buffer.
- */
-static void strip_seq_status_info(struct seq_file *seq, 
-				  const struct strip *strip_info)
-{
-	char temp[32];
-	MetricomAddressString addr_string;
-
-	/* First, we must copy all of our data to a safe place, */
-	/* in case a serial interrupt comes in and changes it.  */
-	int tx_left = strip_info->tx_left;
-	unsigned long rx_average_pps = strip_info->rx_average_pps;
-	unsigned long tx_average_pps = strip_info->tx_average_pps;
-	unsigned long sx_average_pps = strip_info->sx_average_pps;
-	int working = strip_info->working;
-	int firmware_level = strip_info->firmware_level;
-	long watchdog_doprobe = strip_info->watchdog_doprobe;
-	long watchdog_doreset = strip_info->watchdog_doreset;
-	long gratuitous_arp = strip_info->gratuitous_arp;
-	long arp_interval = strip_info->arp_interval;
-	FirmwareVersion firmware_version = strip_info->firmware_version;
-	SerialNumber serial_number = strip_info->serial_number;
-	BatteryVoltage battery_voltage = strip_info->battery_voltage;
-	char *if_name = strip_info->dev->name;
-	MetricomAddress true_dev_addr = strip_info->true_dev_addr;
-	MetricomAddress dev_dev_addr =
-	    *(MetricomAddress *) strip_info->dev->dev_addr;
-	int manual_dev_addr = strip_info->manual_dev_addr;
-#ifdef EXT_COUNTERS
-	unsigned long rx_bytes = strip_info->rx_bytes;
-	unsigned long tx_bytes = strip_info->tx_bytes;
-	unsigned long rx_rbytes = strip_info->rx_rbytes;
-	unsigned long tx_rbytes = strip_info->tx_rbytes;
-	unsigned long rx_sbytes = strip_info->rx_sbytes;
-	unsigned long tx_sbytes = strip_info->tx_sbytes;
-	unsigned long rx_ebytes = strip_info->rx_ebytes;
-	unsigned long tx_ebytes = strip_info->tx_ebytes;
-#endif
-
-	seq_printf(seq, "\nInterface name\t\t%s\n", if_name);
-	seq_printf(seq, " Radio working:\t\t%s\n", working ? "Yes" : "No");
-	radio_address_to_string(&true_dev_addr, &addr_string);
-	seq_printf(seq, " Radio address:\t\t%s\n", addr_string.c);
-	if (manual_dev_addr) {
-		radio_address_to_string(&dev_dev_addr, &addr_string);
-		seq_printf(seq, " Device address:\t%s\n", addr_string.c);
-	}
-	seq_printf(seq, " Firmware version:\t%s", !working ? "Unknown" :
-		     !firmware_level ? "Should be upgraded" :
-		     firmware_version.c);
-	if (firmware_level >= ChecksummedMessages)
-		seq_printf(seq, " (Checksums Enabled)");
-	seq_printf(seq, "\n");
-	seq_printf(seq, " Serial number:\t\t%s\n", serial_number.c);
-	seq_printf(seq, " Battery voltage:\t%s\n", battery_voltage.c);
-	seq_printf(seq, " Transmit queue (bytes):%d\n", tx_left);
-	seq_printf(seq, " Receive packet rate:   %ld packets per second\n",
-		     rx_average_pps / 8);
-	seq_printf(seq, " Transmit packet rate:  %ld packets per second\n",
-		     tx_average_pps / 8);
-	seq_printf(seq, " Sent packet rate:      %ld packets per second\n",
-		     sx_average_pps / 8);
-	seq_printf(seq, " Next watchdog probe:\t%s\n",
-		     time_delta(temp, watchdog_doprobe));
-	seq_printf(seq, " Next watchdog reset:\t%s\n",
-		     time_delta(temp, watchdog_doreset));
-	seq_printf(seq, " Next gratuitous ARP:\t");
-
-	if (!memcmp
-	    (strip_info->dev->dev_addr, zero_address.c,
-	     sizeof(zero_address)))
-		seq_printf(seq, "Disabled\n");
-	else {
-		seq_printf(seq, "%s\n", time_delta(temp, gratuitous_arp));
-		seq_printf(seq, " Next ARP interval:\t%ld seconds\n",
-			     JIFFIE_TO_SEC(arp_interval));
-	}
-
-	if (working) {
-#ifdef EXT_COUNTERS
-		seq_printf(seq, "\n");
-		seq_printf(seq,
-			     " Total bytes:         \trx:\t%lu\ttx:\t%lu\n",
-			     rx_bytes, tx_bytes);
-		seq_printf(seq,
-			     "  thru radio:         \trx:\t%lu\ttx:\t%lu\n",
-			     rx_rbytes, tx_rbytes);
-		seq_printf(seq,
-			     "  thru serial port:   \trx:\t%lu\ttx:\t%lu\n",
-			     rx_sbytes, tx_sbytes);
-		seq_printf(seq,
-			     " Total stat/err bytes:\trx:\t%lu\ttx:\t%lu\n",
-			     rx_ebytes, tx_ebytes);
-#endif
-		strip_seq_neighbours(seq, &strip_info->poletops,
-					"Poletops:");
-		strip_seq_neighbours(seq, &strip_info->portables,
-					"Portables:");
-	}
-}
-
-/*
- * This function is exports status information from the STRIP driver through
- * the /proc file system.
- */
-static int strip_seq_show(struct seq_file *seq, void *v)
-{
-	if (v == SEQ_START_TOKEN)
-		seq_printf(seq, "strip_version: %s\n", StripVersion);
-	else
-		strip_seq_status_info(seq, (const struct strip *)v);
-	return 0;
-}
-
-
-static struct seq_operations strip_seq_ops = {
-	.start = strip_seq_start,
-	.next  = strip_seq_next,
-	.stop  = strip_seq_stop,
-	.show  = strip_seq_show,
-};
-
-static int strip_seq_open(struct inode *inode, struct file *file)
-{
-	return seq_open(file, &strip_seq_ops);
-}
-
-static const struct file_operations strip_seq_fops = {
-	.owner	 = THIS_MODULE,
-	.open    = strip_seq_open,
-	.read    = seq_read,
-	.llseek  = seq_lseek,
-	.release = seq_release,
-};
-#endif
-
-
-
-/************************************************************************/
-/* Sending routines							*/
-
-static void ResetRadio(struct strip *strip_info)
-{
-	struct tty_struct *tty = strip_info->tty;
-	static const char init[] = "ate0q1dt**starmode\r**";
-	StringDescriptor s = { init, sizeof(init) - 1 };
-
-	/* 
-	 * If the radio isn't working anymore,
-	 * we should clear the old status information.
-	 */
-	if (strip_info->working) {
-		printk(KERN_INFO "%s: No response: Resetting radio.\n",
-		       strip_info->dev->name);
-		strip_info->firmware_version.c[0] = '\0';
-		strip_info->serial_number.c[0] = '\0';
-		strip_info->battery_voltage.c[0] = '\0';
-		strip_info->portables.num_nodes = 0;
-		do_gettimeofday(&strip_info->portables.timestamp);
-		strip_info->poletops.num_nodes = 0;
-		do_gettimeofday(&strip_info->poletops.timestamp);
-	}
-
-	strip_info->pps_timer = jiffies;
-	strip_info->rx_pps_count = 0;
-	strip_info->tx_pps_count = 0;
-	strip_info->sx_pps_count = 0;
-	strip_info->rx_average_pps = 0;
-	strip_info->tx_average_pps = 0;
-	strip_info->sx_average_pps = 0;
-
-	/* Mark radio address as unknown */
-	*(MetricomAddress *) & strip_info->true_dev_addr = zero_address;
-	if (!strip_info->manual_dev_addr)
-		*(MetricomAddress *) strip_info->dev->dev_addr =
-		    zero_address;
-	strip_info->working = FALSE;
-	strip_info->firmware_level = NoStructure;
-	strip_info->next_command = CompatibilityCommand;
-	strip_info->watchdog_doprobe = jiffies + 10 * HZ;
-	strip_info->watchdog_doreset = jiffies + 1 * HZ;
-
-	/* If the user has selected a baud rate above 38.4 see what magic we have to do */
-	if (strip_info->user_baud > 38400) {
-		/*
-		 * Subtle stuff: Pay attention :-)
-		 * If the serial port is currently at the user's selected (>38.4) rate,
-		 * then we temporarily switch to 19.2 and issue the ATS304 command
-		 * to tell the radio to switch to the user's selected rate.
-		 * If the serial port is not currently at that rate, that means we just
-		 * issued the ATS304 command last time through, so this time we restore
-		 * the user's selected rate and issue the normal starmode reset string.
-		 */
-		if (strip_info->user_baud == tty_get_baud_rate(tty)) {
-			static const char b0[] = "ate0q1s304=57600\r";
-			static const char b1[] = "ate0q1s304=115200\r";
-			static const StringDescriptor baudstring[2] =
-			    { {b0, sizeof(b0) - 1}
-			, {b1, sizeof(b1) - 1}
-			};
-			set_baud(tty, 19200);
-			if (strip_info->user_baud == 57600)
-				s = baudstring[0];
-			else if (strip_info->user_baud == 115200)
-				s = baudstring[1];
-			else
-				s = baudstring[1];	/* For now */
-		} else
-			set_baud(tty, strip_info->user_baud);
-	}
-
-	tty->ops->write(tty, s.string, s.length);
-#ifdef EXT_COUNTERS
-	strip_info->tx_ebytes += s.length;
-#endif
-}
-
-/*
- * Called by the driver when there's room for more data.  If we have
- * more packets to send, we send them here.
- */
-
-static void strip_write_some_more(struct tty_struct *tty)
-{
-	struct strip *strip_info = (struct strip *) tty->disc_data;
-
-	/* First make sure we're connected. */
-	if (!strip_info || strip_info->magic != STRIP_MAGIC ||
-	    !netif_running(strip_info->dev))
-		return;
-
-	if (strip_info->tx_left > 0) {
-		int num_written =
-		    tty->ops->write(tty, strip_info->tx_head,
-				      strip_info->tx_left);
-		strip_info->tx_left -= num_written;
-		strip_info->tx_head += num_written;
-#ifdef EXT_COUNTERS
-		strip_info->tx_sbytes += num_written;
-#endif
-	} else {		/* Else start transmission of another packet */
-
-		tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP);
-		strip_unlock(strip_info);
-	}
-}
-
-static __u8 *add_checksum(__u8 * buffer, __u8 * end)
-{
-	__u16 sum = 0;
-	__u8 *p = buffer;
-	while (p < end)
-		sum += *p++;
-	end[3] = hextable[sum & 0xF];
-	sum >>= 4;
-	end[2] = hextable[sum & 0xF];
-	sum >>= 4;
-	end[1] = hextable[sum & 0xF];
-	sum >>= 4;
-	end[0] = hextable[sum & 0xF];
-	return (end + 4);
-}
-
-static unsigned char *strip_make_packet(unsigned char *buffer,
-					struct strip *strip_info,
-					struct sk_buff *skb)
-{
-	__u8 *ptr = buffer;
-	__u8 *stuffstate = NULL;
-	STRIP_Header *header = (STRIP_Header *) skb->data;
-	MetricomAddress haddr = header->dst_addr;
-	int len = skb->len - sizeof(STRIP_Header);
-	MetricomKey key;
-
-	/*HexDump("strip_make_packet", strip_info, skb->data, skb->data + skb->len); */
-
-	if (header->protocol == htons(ETH_P_IP))
-		key = SIP0Key;
-	else if (header->protocol == htons(ETH_P_ARP))
-		key = ARP0Key;
-	else {
-		printk(KERN_ERR
-		       "%s: strip_make_packet: Unknown packet type 0x%04X\n",
-		       strip_info->dev->name, ntohs(header->protocol));
-		return (NULL);
-	}
-
-	if (len > strip_info->mtu) {
-		printk(KERN_ERR
-		       "%s: Dropping oversized transmit packet: %d bytes\n",
-		       strip_info->dev->name, len);
-		return (NULL);
-	}
-
-	/*
-	 * If we're sending to ourselves, discard the packet.
-	 * (Metricom radios choke if they try to send a packet to their own address.)
-	 */
-	if (!memcmp(haddr.c, strip_info->true_dev_addr.c, sizeof(haddr))) {
-		printk(KERN_ERR "%s: Dropping packet addressed to self\n",
-		       strip_info->dev->name);
-		return (NULL);
-	}
-
-	/*
-	 * If this is a broadcast packet, send it to our designated Metricom
-	 * 'broadcast hub' radio (First byte of address being 0xFF means broadcast)
-	 */
-	if (haddr.c[0] == 0xFF) {
-		__be32 brd = 0;
-		struct in_device *in_dev;
-
-		rcu_read_lock();
-		in_dev = __in_dev_get_rcu(strip_info->dev);
-		if (in_dev == NULL) {
-			rcu_read_unlock();
-			return NULL;
-		}
-		if (in_dev->ifa_list)
-			brd = in_dev->ifa_list->ifa_broadcast;
-		rcu_read_unlock();
-
-		/* arp_query returns 1 if it succeeds in looking up the address, 0 if it fails */
-		if (!arp_query(haddr.c, brd, strip_info->dev)) {
-			printk(KERN_ERR
-			       "%s: Unable to send packet (no broadcast hub configured)\n",
-			       strip_info->dev->name);
-			return (NULL);
-		}
-		/*
-		 * If we are the broadcast hub, don't bother sending to ourselves.
-		 * (Metricom radios choke if they try to send a packet to their own address.)
-		 */
-		if (!memcmp
-		    (haddr.c, strip_info->true_dev_addr.c, sizeof(haddr)))
-			return (NULL);
-	}
-
-	*ptr++ = 0x0D;
-	*ptr++ = '*';
-	*ptr++ = hextable[haddr.c[2] >> 4];
-	*ptr++ = hextable[haddr.c[2] & 0xF];
-	*ptr++ = hextable[haddr.c[3] >> 4];
-	*ptr++ = hextable[haddr.c[3] & 0xF];
-	*ptr++ = '-';
-	*ptr++ = hextable[haddr.c[4] >> 4];
-	*ptr++ = hextable[haddr.c[4] & 0xF];
-	*ptr++ = hextable[haddr.c[5] >> 4];
-	*ptr++ = hextable[haddr.c[5] & 0xF];
-	*ptr++ = '*';
-	*ptr++ = key.c[0];
-	*ptr++ = key.c[1];
-	*ptr++ = key.c[2];
-	*ptr++ = key.c[3];
-
-	ptr =
-	    StuffData(skb->data + sizeof(STRIP_Header), len, ptr,
-		      &stuffstate);
-
-	if (strip_info->firmware_level >= ChecksummedMessages)
-		ptr = add_checksum(buffer + 1, ptr);
-
-	*ptr++ = 0x0D;
-	return (ptr);
-}
-
-static void strip_send(struct strip *strip_info, struct sk_buff *skb)
-{
-	MetricomAddress haddr;
-	unsigned char *ptr = strip_info->tx_buff;
-	int doreset = (long) jiffies - strip_info->watchdog_doreset >= 0;
-	int doprobe = (long) jiffies - strip_info->watchdog_doprobe >= 0
-	    && !doreset;
-	__be32 addr, brd;
-
-	/*
-	 * 1. If we have a packet, encapsulate it and put it in the buffer
-	 */
-	if (skb) {
-		char *newptr = strip_make_packet(ptr, strip_info, skb);
-		strip_info->tx_pps_count++;
-		if (!newptr)
-			strip_info->tx_dropped++;
-		else {
-			ptr = newptr;
-			strip_info->sx_pps_count++;
-			strip_info->tx_packets++;	/* Count another successful packet */
-#ifdef EXT_COUNTERS
-			strip_info->tx_bytes += skb->len;
-			strip_info->tx_rbytes += ptr - strip_info->tx_buff;
-#endif
-			/*DumpData("Sending:", strip_info, strip_info->tx_buff, ptr); */
-			/*HexDump("Sending", strip_info, strip_info->tx_buff, ptr); */
-		}
-	}
-
-	/*
-	 * 2. If it is time for another tickle, tack it on, after the packet
-	 */
-	if (doprobe) {
-		StringDescriptor ts = CommandString[strip_info->next_command];
-#if TICKLE_TIMERS
-		{
-			struct timeval tv;
-			do_gettimeofday(&tv);
-			printk(KERN_INFO "**** Sending tickle string %d      at %02d.%06d\n",
-			       strip_info->next_command, tv.tv_sec % 100,
-			       tv.tv_usec);
-		}
-#endif
-		if (ptr == strip_info->tx_buff)
-			*ptr++ = 0x0D;
-
-		*ptr++ = '*';	/* First send "**" to provoke an error message */
-		*ptr++ = '*';
-
-		/* Then add the command */
-		memcpy(ptr, ts.string, ts.length);
-
-		/* Add a checksum ? */
-		if (strip_info->firmware_level < ChecksummedMessages)
-			ptr += ts.length;
-		else
-			ptr = add_checksum(ptr, ptr + ts.length);
-
-		*ptr++ = 0x0D;	/* Terminate the command with a <CR> */
-
-		/* Cycle to next periodic command? */
-		if (strip_info->firmware_level >= StructuredMessages)
-			if (++strip_info->next_command >=
-			    ARRAY_SIZE(CommandString))
-				strip_info->next_command = 0;
-#ifdef EXT_COUNTERS
-		strip_info->tx_ebytes += ts.length;
-#endif
-		strip_info->watchdog_doprobe = jiffies + 10 * HZ;
-		strip_info->watchdog_doreset = jiffies + 1 * HZ;
-		/*printk(KERN_INFO "%s: Routine radio test.\n", strip_info->dev->name); */
-	}
-
-	/*
-	 * 3. Set up the strip_info ready to send the data (if any).
-	 */
-	strip_info->tx_head = strip_info->tx_buff;
-	strip_info->tx_left = ptr - strip_info->tx_buff;
-	strip_info->tty->flags |= (1 << TTY_DO_WRITE_WAKEUP);
-
-	/*
-	 * 4. Debugging check to make sure we're not overflowing the buffer.
-	 */
-	if (strip_info->tx_size - strip_info->tx_left < 20)
-		printk(KERN_ERR "%s: Sending%5d bytes;%5d bytes free.\n",
-		       strip_info->dev->name, strip_info->tx_left,
-		       strip_info->tx_size - strip_info->tx_left);
-
-	/*
-	 * 5. If watchdog has expired, reset the radio. Note: if there's data waiting in
-	 * the buffer, strip_write_some_more will send it after the reset has finished
-	 */
-	if (doreset) {
-		ResetRadio(strip_info);
-		return;
-	}
-
-	if (1) {
-		struct in_device *in_dev;
-
-		brd = addr = 0;
-		rcu_read_lock();
-		in_dev = __in_dev_get_rcu(strip_info->dev);
-		if (in_dev) {
-			if (in_dev->ifa_list) {
-				brd = in_dev->ifa_list->ifa_broadcast;
-				addr = in_dev->ifa_list->ifa_local;
-			}
-		}
-		rcu_read_unlock();
-	}
-
-
-	/*
-	 * 6. If it is time for a periodic ARP, queue one up to be sent.
-	 * We only do this if:
-	 *  1. The radio is working
-	 *  2. It's time to send another periodic ARP
-	 *  3. We really know what our address is (and it is not manually set to zero)
-	 *  4. We have a designated broadcast address configured
-	 * If we queue up an ARP packet when we don't have a designated broadcast
-	 * address configured, then the packet will just have to be discarded in
-	 * strip_make_packet. This is not fatal, but it causes misleading information
-	 * to be displayed in tcpdump. tcpdump will report that periodic APRs are
-	 * being sent, when in fact they are not, because they are all being dropped
-	 * in the strip_make_packet routine.
-	 */
-	if (strip_info->working
-	    && (long) jiffies - strip_info->gratuitous_arp >= 0
-	    && memcmp(strip_info->dev->dev_addr, zero_address.c,
-		      sizeof(zero_address))
-	    && arp_query(haddr.c, brd, strip_info->dev)) {
-		/*printk(KERN_INFO "%s: Sending gratuitous ARP with interval %ld\n",
-		   strip_info->dev->name, strip_info->arp_interval / HZ); */
-		strip_info->gratuitous_arp =
-		    jiffies + strip_info->arp_interval;
-		strip_info->arp_interval *= 2;
-		if (strip_info->arp_interval > MaxARPInterval)
-			strip_info->arp_interval = MaxARPInterval;
-		if (addr)
-			arp_send(ARPOP_REPLY, ETH_P_ARP, addr,	/* Target address of ARP packet is our address */
-				 strip_info->dev,	/* Device to send packet on */
-				 addr,	/* Source IP address this ARP packet comes from */
-				 NULL,	/* Destination HW address is NULL (broadcast it) */
-				 strip_info->dev->dev_addr,	/* Source HW address is our HW address */
-				 strip_info->dev->dev_addr);	/* Target HW address is our HW address (redundant) */
-	}
-
-	/*
-	 * 7. All ready. Start the transmission
-	 */
-	strip_write_some_more(strip_info->tty);
-}
-
-/* Encapsulate a datagram and kick it into a TTY queue. */
-static int strip_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct strip *strip_info = netdev_priv(dev);
-
-	if (!netif_running(dev)) {
-		printk(KERN_ERR "%s: xmit call when iface is down\n",
-		       dev->name);
-		return (1);
-	}
-
-	netif_stop_queue(dev);
-
-	del_timer(&strip_info->idle_timer);
-
-
-	if (time_after(jiffies, strip_info->pps_timer + HZ)) {
-		unsigned long t = jiffies - strip_info->pps_timer;
-		unsigned long rx_pps_count = (strip_info->rx_pps_count * HZ * 8 + t / 2) / t;
-		unsigned long tx_pps_count = (strip_info->tx_pps_count * HZ * 8 + t / 2) / t;
-		unsigned long sx_pps_count = (strip_info->sx_pps_count * HZ * 8 + t / 2) / t;
-
-		strip_info->pps_timer = jiffies;
-		strip_info->rx_pps_count = 0;
-		strip_info->tx_pps_count = 0;
-		strip_info->sx_pps_count = 0;
-
-		strip_info->rx_average_pps = (strip_info->rx_average_pps + rx_pps_count + 1) / 2;
-		strip_info->tx_average_pps = (strip_info->tx_average_pps + tx_pps_count + 1) / 2;
-		strip_info->sx_average_pps = (strip_info->sx_average_pps + sx_pps_count + 1) / 2;
-
-		if (rx_pps_count / 8 >= 10)
-			printk(KERN_INFO "%s: WARNING: Receiving %ld packets per second.\n",
-			       strip_info->dev->name, rx_pps_count / 8);
-		if (tx_pps_count / 8 >= 10)
-			printk(KERN_INFO "%s: WARNING: Tx        %ld packets per second.\n",
-			       strip_info->dev->name, tx_pps_count / 8);
-		if (sx_pps_count / 8 >= 10)
-			printk(KERN_INFO "%s: WARNING: Sending   %ld packets per second.\n",
-			       strip_info->dev->name, sx_pps_count / 8);
-	}
-
-	spin_lock_bh(&strip_lock);
-
-	strip_send(strip_info, skb);
-
-	spin_unlock_bh(&strip_lock);
-
-	if (skb)
-		dev_kfree_skb(skb);
-	return 0;
-}
-
-/*
- * IdleTask periodically calls strip_xmit, so even when we have no IP packets
- * to send for an extended period of time, the watchdog processing still gets
- * done to ensure that the radio stays in Starmode
- */
-
-static void strip_IdleTask(unsigned long parameter)
-{
-	strip_xmit(NULL, (struct net_device *) parameter);
-}
-
-/*
- * Create the MAC header for an arbitrary protocol layer
- *
- * saddr!=NULL        means use this specific address (n/a for Metricom)
- * saddr==NULL        means use default device source address
- * daddr!=NULL        means use this destination address
- * daddr==NULL        means leave destination address alone
- *                 (e.g. unresolved arp -- kernel will call
- *                 rebuild_header later to fill in the address)
- */
-
-static int strip_header(struct sk_buff *skb, struct net_device *dev,
-			unsigned short type, const void *daddr,
-			const void *saddr, unsigned len)
-{
-	struct strip *strip_info = netdev_priv(dev);
-	STRIP_Header *header = (STRIP_Header *) skb_push(skb, sizeof(STRIP_Header));
-
-	/*printk(KERN_INFO "%s: strip_header 0x%04X %s\n", dev->name, type,
-	   type == ETH_P_IP ? "IP" : type == ETH_P_ARP ? "ARP" : ""); */
-
-	header->src_addr = strip_info->true_dev_addr;
-	header->protocol = htons(type);
-
-	/*HexDump("strip_header", netdev_priv(dev), skb->data, skb->data + skb->len); */
-
-	if (!daddr)
-		return (-dev->hard_header_len);
-
-	header->dst_addr = *(MetricomAddress *) daddr;
-	return (dev->hard_header_len);
-}
-
-/*
- * Rebuild the MAC header. This is called after an ARP
- * (or in future other address resolution) has completed on this
- * sk_buff. We now let ARP fill in the other fields.
- * I think this should return zero if packet is ready to send,
- * or non-zero if it needs more time to do an address lookup
- */
-
-static int strip_rebuild_header(struct sk_buff *skb)
-{
-#ifdef CONFIG_INET
-	STRIP_Header *header = (STRIP_Header *) skb->data;
-
-	/* Arp find returns zero if if knows the address, */
-	/* or if it doesn't know the address it sends an ARP packet and returns non-zero */
-	return arp_find(header->dst_addr.c, skb) ? 1 : 0;
-#else
-	return 0;
-#endif
-}
-
-
-/************************************************************************/
-/* Receiving routines							*/
-
-/*
- * This function parses the response to the ATS300? command,
- * extracting the radio version and serial number.
- */
-static void get_radio_version(struct strip *strip_info, __u8 * ptr, __u8 * end)
-{
-	__u8 *p, *value_begin, *value_end;
-	int len;
-
-	/* Determine the beginning of the second line of the payload */
-	p = ptr;
-	while (p < end && *p != 10)
-		p++;
-	if (p >= end)
-		return;
-	p++;
-	value_begin = p;
-
-	/* Determine the end of line */
-	while (p < end && *p != 10)
-		p++;
-	if (p >= end)
-		return;
-	value_end = p;
-	p++;
-
-	len = value_end - value_begin;
-	len = min_t(int, len, sizeof(FirmwareVersion) - 1);
-	if (strip_info->firmware_version.c[0] == 0)
-		printk(KERN_INFO "%s: Radio Firmware: %.*s\n",
-		       strip_info->dev->name, len, value_begin);
-	sprintf(strip_info->firmware_version.c, "%.*s", len, value_begin);
-
-	/* Look for the first colon */
-	while (p < end && *p != ':')
-		p++;
-	if (p >= end)
-		return;
-	/* Skip over the space */
-	p += 2;
-	len = sizeof(SerialNumber) - 1;
-	if (p + len <= end) {
-		sprintf(strip_info->serial_number.c, "%.*s", len, p);
-	} else {
-		printk(KERN_DEBUG
-		       "STRIP: radio serial number shorter (%zd) than expected (%d)\n",
-		       end - p, len);
-	}
-}
-
-/*
- * This function parses the response to the ATS325? command,
- * extracting the radio battery voltage.
- */
-static void get_radio_voltage(struct strip *strip_info, __u8 * ptr, __u8 * end)
-{
-	int len;
-
-	len = sizeof(BatteryVoltage) - 1;
-	if (ptr + len <= end) {
-		sprintf(strip_info->battery_voltage.c, "%.*s", len, ptr);
-	} else {
-		printk(KERN_DEBUG
-		       "STRIP: radio voltage string shorter (%zd) than expected (%d)\n",
-		       end - ptr, len);
-	}
-}
-
-/*
- * This function parses the responses to the AT~LA and ATS311 commands,
- * which list the radio's neighbours.
- */
-static void get_radio_neighbours(MetricomNodeTable * table, __u8 * ptr, __u8 * end)
-{
-	table->num_nodes = 0;
-	while (ptr < end && table->num_nodes < NODE_TABLE_SIZE) {
-		MetricomNode *node = &table->node[table->num_nodes++];
-		char *dst = node->c, *limit = dst + sizeof(*node) - 1;
-		while (ptr < end && *ptr <= 32)
-			ptr++;
-		while (ptr < end && dst < limit && *ptr != 10)
-			*dst++ = *ptr++;
-		*dst++ = 0;
-		while (ptr < end && ptr[-1] != 10)
-			ptr++;
-	}
-	do_gettimeofday(&table->timestamp);
-}
-
-static int get_radio_address(struct strip *strip_info, __u8 * p)
-{
-	MetricomAddress addr;
-
-	if (string_to_radio_address(&addr, p))
-		return (1);
-
-	/* See if our radio address has changed */
-	if (memcmp(strip_info->true_dev_addr.c, addr.c, sizeof(addr))) {
-		MetricomAddressString addr_string;
-		radio_address_to_string(&addr, &addr_string);
-		printk(KERN_INFO "%s: Radio address = %s\n",
-		       strip_info->dev->name, addr_string.c);
-		strip_info->true_dev_addr = addr;
-		if (!strip_info->manual_dev_addr)
-			*(MetricomAddress *) strip_info->dev->dev_addr =
-			    addr;
-		/* Give the radio a few seconds to get its head straight, then send an arp */
-		strip_info->gratuitous_arp = jiffies + 15 * HZ;
-		strip_info->arp_interval = 1 * HZ;
-	}
-	return (0);
-}
-
-static int verify_checksum(struct strip *strip_info)
-{
-	__u8 *p = strip_info->sx_buff;
-	__u8 *end = strip_info->sx_buff + strip_info->sx_count - 4;
-	u_short sum =
-	    (READHEX16(end[0]) << 12) | (READHEX16(end[1]) << 8) |
-	    (READHEX16(end[2]) << 4) | (READHEX16(end[3]));
-	while (p < end)
-		sum -= *p++;
-	if (sum == 0 && strip_info->firmware_level == StructuredMessages) {
-		strip_info->firmware_level = ChecksummedMessages;
-		printk(KERN_INFO "%s: Radio provides message checksums\n",
-		       strip_info->dev->name);
-	}
-	return (sum == 0);
-}
-
-static void RecvErr(char *msg, struct strip *strip_info)
-{
-	__u8 *ptr = strip_info->sx_buff;
-	__u8 *end = strip_info->sx_buff + strip_info->sx_count;
-	DumpData(msg, strip_info, ptr, end);
-	strip_info->rx_errors++;
-}
-
-static void RecvErr_Message(struct strip *strip_info, __u8 * sendername,
-			    const __u8 * msg, u_long len)
-{
-	if (has_prefix(msg, len, "001")) {	/* Not in StarMode! */
-		RecvErr("Error Msg:", strip_info);
-		printk(KERN_INFO "%s: Radio %s is not in StarMode\n",
-		       strip_info->dev->name, sendername);
-	}
-
-	else if (has_prefix(msg, len, "002")) {	/* Remap handle */
-		/* We ignore "Remap handle" messages for now */
-	}
-
-	else if (has_prefix(msg, len, "003")) {	/* Can't resolve name */
-		RecvErr("Error Msg:", strip_info);
-		printk(KERN_INFO "%s: Destination radio name is unknown\n",
-		       strip_info->dev->name);
-	}
-
-	else if (has_prefix(msg, len, "004")) {	/* Name too small or missing */
-		strip_info->watchdog_doreset = jiffies + LongTime;
-#if TICKLE_TIMERS
-		{
-			struct timeval tv;
-			do_gettimeofday(&tv);
-			printk(KERN_INFO
-			       "**** Got ERR_004 response         at %02d.%06d\n",
-			       tv.tv_sec % 100, tv.tv_usec);
-		}
-#endif
-		if (!strip_info->working) {
-			strip_info->working = TRUE;
-			printk(KERN_INFO "%s: Radio now in starmode\n",
-			       strip_info->dev->name);
-			/*
-			 * If the radio has just entered a working state, we should do our first
-			 * probe ASAP, so that we find out our radio address etc. without delay.
-			 */
-			strip_info->watchdog_doprobe = jiffies;
-		}
-		if (strip_info->firmware_level == NoStructure && sendername) {
-			strip_info->firmware_level = StructuredMessages;
-			strip_info->next_command = 0;	/* Try to enable checksums ASAP */
-			printk(KERN_INFO
-			       "%s: Radio provides structured messages\n",
-			       strip_info->dev->name);
-		}
-		if (strip_info->firmware_level >= StructuredMessages) {
-			/*
-			 * If this message has a valid checksum on the end, then the call to verify_checksum
-			 * will elevate the firmware_level to ChecksummedMessages for us. (The actual return
-			 * code from verify_checksum is ignored here.)
-			 */
-			verify_checksum(strip_info);
-			/*
-			 * If the radio has structured messages but we don't yet have all our information about it,
-			 * we should do probes without delay, until we have gathered all the information
-			 */
-			if (!GOT_ALL_RADIO_INFO(strip_info))
-				strip_info->watchdog_doprobe = jiffies;
-		}
-	}
-
-	else if (has_prefix(msg, len, "005"))	/* Bad count specification */
-		RecvErr("Error Msg:", strip_info);
-
-	else if (has_prefix(msg, len, "006"))	/* Header too big */
-		RecvErr("Error Msg:", strip_info);
-
-	else if (has_prefix(msg, len, "007")) {	/* Body too big */
-		RecvErr("Error Msg:", strip_info);
-		printk(KERN_ERR
-		       "%s: Error! Packet size too big for radio.\n",
-		       strip_info->dev->name);
-	}
-
-	else if (has_prefix(msg, len, "008")) {	/* Bad character in name */
-		RecvErr("Error Msg:", strip_info);
-		printk(KERN_ERR
-		       "%s: Radio name contains illegal character\n",
-		       strip_info->dev->name);
-	}
-
-	else if (has_prefix(msg, len, "009"))	/* No count or line terminator */
-		RecvErr("Error Msg:", strip_info);
-
-	else if (has_prefix(msg, len, "010"))	/* Invalid checksum */
-		RecvErr("Error Msg:", strip_info);
-
-	else if (has_prefix(msg, len, "011"))	/* Checksum didn't match */
-		RecvErr("Error Msg:", strip_info);
-
-	else if (has_prefix(msg, len, "012"))	/* Failed to transmit packet */
-		RecvErr("Error Msg:", strip_info);
-
-	else
-		RecvErr("Error Msg:", strip_info);
-}
-
-static void process_AT_response(struct strip *strip_info, __u8 * ptr,
-				__u8 * end)
-{
-	u_long len;
-	__u8 *p = ptr;
-	while (p < end && p[-1] != 10)
-		p++;		/* Skip past first newline character */
-	/* Now ptr points to the AT command, and p points to the text of the response. */
-	len = p - ptr;
-
-#if TICKLE_TIMERS
-	{
-		struct timeval tv;
-		do_gettimeofday(&tv);
-		printk(KERN_INFO "**** Got AT response %.7s      at %02d.%06d\n",
-		       ptr, tv.tv_sec % 100, tv.tv_usec);
-	}
-#endif
-
-	if (has_prefix(ptr, len, "ATS300?"))
-		get_radio_version(strip_info, p, end);
-	else if (has_prefix(ptr, len, "ATS305?"))
-		get_radio_address(strip_info, p);
-	else if (has_prefix(ptr, len, "ATS311?"))
-		get_radio_neighbours(&strip_info->poletops, p, end);
-	else if (has_prefix(ptr, len, "ATS319=7"))
-		verify_checksum(strip_info);
-	else if (has_prefix(ptr, len, "ATS325?"))
-		get_radio_voltage(strip_info, p, end);
-	else if (has_prefix(ptr, len, "AT~LA"))
-		get_radio_neighbours(&strip_info->portables, p, end);
-	else
-		RecvErr("Unknown AT Response:", strip_info);
-}
-
-static void process_ACK(struct strip *strip_info, __u8 * ptr, __u8 * end)
-{
-	/* Currently we don't do anything with ACKs from the radio */
-}
-
-static void process_Info(struct strip *strip_info, __u8 * ptr, __u8 * end)
-{
-	if (ptr + 16 > end)
-		RecvErr("Bad Info Msg:", strip_info);
-}
-
-static struct net_device *get_strip_dev(struct strip *strip_info)
-{
-	/* If our hardware address is *manually set* to zero, and we know our */
-	/* real radio hardware address, try to find another strip device that has been */
-	/* manually set to that address that we can 'transfer ownership' of this packet to  */
-	if (strip_info->manual_dev_addr &&
-	    !memcmp(strip_info->dev->dev_addr, zero_address.c,
-		    sizeof(zero_address))
-	    && memcmp(&strip_info->true_dev_addr, zero_address.c,
-		      sizeof(zero_address))) {
-		struct net_device *dev;
-		read_lock_bh(&dev_base_lock);
-		for_each_netdev(&init_net, dev) {
-			if (dev->type == strip_info->dev->type &&
-			    !memcmp(dev->dev_addr,
-				    &strip_info->true_dev_addr,
-				    sizeof(MetricomAddress))) {
-				printk(KERN_INFO
-				       "%s: Transferred packet ownership to %s.\n",
-				       strip_info->dev->name, dev->name);
-				read_unlock_bh(&dev_base_lock);
-				return (dev);
-			}
-		}
-		read_unlock_bh(&dev_base_lock);
-	}
-	return (strip_info->dev);
-}
-
-/*
- * Send one completely decapsulated datagram to the next layer.
- */
-
-static void deliver_packet(struct strip *strip_info, STRIP_Header * header,
-			   __u16 packetlen)
-{
-	struct sk_buff *skb = dev_alloc_skb(sizeof(STRIP_Header) + packetlen);
-	if (!skb) {
-		printk(KERN_ERR "%s: memory squeeze, dropping packet.\n",
-		       strip_info->dev->name);
-		strip_info->rx_dropped++;
-	} else {
-		memcpy(skb_put(skb, sizeof(STRIP_Header)), header,
-		       sizeof(STRIP_Header));
-		memcpy(skb_put(skb, packetlen), strip_info->rx_buff,
-		       packetlen);
-		skb->dev = get_strip_dev(strip_info);
-		skb->protocol = header->protocol;
-		skb_reset_mac_header(skb);
-
-		/* Having put a fake header on the front of the sk_buff for the */
-		/* benefit of tools like tcpdump, skb_pull now 'consumes' that  */
-		/* fake header before we hand the packet up to the next layer.  */
-		skb_pull(skb, sizeof(STRIP_Header));
-
-		/* Finally, hand the packet up to the next layer (e.g. IP or ARP, etc.) */
-		strip_info->rx_packets++;
-		strip_info->rx_pps_count++;
-#ifdef EXT_COUNTERS
-		strip_info->rx_bytes += packetlen;
-#endif
-		skb->dev->last_rx = jiffies;
-		netif_rx(skb);
-	}
-}
-
-static void process_IP_packet(struct strip *strip_info,
-			      STRIP_Header * header, __u8 * ptr,
-			      __u8 * end)
-{
-	__u16 packetlen;
-
-	/* Decode start of the IP packet header */
-	ptr = UnStuffData(ptr, end, strip_info->rx_buff, 4);
-	if (!ptr) {
-		RecvErr("IP Packet too short", strip_info);
-		return;
-	}
-
-	packetlen = ((__u16) strip_info->rx_buff[2] << 8) | strip_info->rx_buff[3];
-
-	if (packetlen > MAX_RECV_MTU) {
-		printk(KERN_INFO "%s: Dropping oversized received IP packet: %d bytes\n",
-		       strip_info->dev->name, packetlen);
-		strip_info->rx_dropped++;
-		return;
-	}
-
-	/*printk(KERN_INFO "%s: Got %d byte IP packet\n", strip_info->dev->name, packetlen); */
-
-	/* Decode remainder of the IP packet */
-	ptr =
-	    UnStuffData(ptr, end, strip_info->rx_buff + 4, packetlen - 4);
-	if (!ptr) {
-		RecvErr("IP Packet too short", strip_info);
-		return;
-	}
-
-	if (ptr < end) {
-		RecvErr("IP Packet too long", strip_info);
-		return;
-	}
-
-	header->protocol = htons(ETH_P_IP);
-
-	deliver_packet(strip_info, header, packetlen);
-}
-
-static void process_ARP_packet(struct strip *strip_info,
-			       STRIP_Header * header, __u8 * ptr,
-			       __u8 * end)
-{
-	__u16 packetlen;
-	struct arphdr *arphdr = (struct arphdr *) strip_info->rx_buff;
-
-	/* Decode start of the ARP packet */
-	ptr = UnStuffData(ptr, end, strip_info->rx_buff, 8);
-	if (!ptr) {
-		RecvErr("ARP Packet too short", strip_info);
-		return;
-	}
-
-	packetlen = 8 + (arphdr->ar_hln + arphdr->ar_pln) * 2;
-
-	if (packetlen > MAX_RECV_MTU) {
-		printk(KERN_INFO
-		       "%s: Dropping oversized received ARP packet: %d bytes\n",
-		       strip_info->dev->name, packetlen);
-		strip_info->rx_dropped++;
-		return;
-	}
-
-	/*printk(KERN_INFO "%s: Got %d byte ARP %s\n",
-	   strip_info->dev->name, packetlen,
-	   ntohs(arphdr->ar_op) == ARPOP_REQUEST ? "request" : "reply"); */
-
-	/* Decode remainder of the ARP packet */
-	ptr =
-	    UnStuffData(ptr, end, strip_info->rx_buff + 8, packetlen - 8);
-	if (!ptr) {
-		RecvErr("ARP Packet too short", strip_info);
-		return;
-	}
-
-	if (ptr < end) {
-		RecvErr("ARP Packet too long", strip_info);
-		return;
-	}
-
-	header->protocol = htons(ETH_P_ARP);
-
-	deliver_packet(strip_info, header, packetlen);
-}
-
-/*
- * process_text_message processes a <CR>-terminated block of data received
- * from the radio that doesn't begin with a '*' character. All normal
- * Starmode communication messages with the radio begin with a '*',
- * so any text that does not indicates a serial port error, a radio that
- * is in Hayes command mode instead of Starmode, or a radio with really
- * old firmware that doesn't frame its Starmode responses properly.
- */
-static void process_text_message(struct strip *strip_info)
-{
-	__u8 *msg = strip_info->sx_buff;
-	int len = strip_info->sx_count;
-
-	/* Check for anything that looks like it might be our radio name */
-	/* (This is here for backwards compatibility with old firmware)  */
-	if (len == 9 && get_radio_address(strip_info, msg) == 0)
-		return;
-
-	if (text_equal(msg, len, "OK"))
-		return;		/* Ignore 'OK' responses from prior commands */
-	if (text_equal(msg, len, "ERROR"))
-		return;		/* Ignore 'ERROR' messages */
-	if (has_prefix(msg, len, "ate0q1"))
-		return;		/* Ignore character echo back from the radio */
-
-	/* Catch other error messages */
-	/* (This is here for backwards compatibility with old firmware) */
-	if (has_prefix(msg, len, "ERR_")) {
-		RecvErr_Message(strip_info, NULL, &msg[4], len - 4);
-		return;
-	}
-
-	RecvErr("No initial *", strip_info);
-}
-
-/*
- * process_message processes a <CR>-terminated block of data received
- * from the radio. If the radio is not in Starmode or has old firmware,
- * it may be a line of text in response to an AT command. Ideally, with
- * a current radio that's properly in Starmode, all data received should
- * be properly framed and checksummed radio message blocks, containing
- * either a starmode packet, or a other communication from the radio
- * firmware, like "INF_" Info messages and &COMMAND responses.
- */
-static void process_message(struct strip *strip_info)
-{
-	STRIP_Header header = { zero_address, zero_address, 0 };
-	__u8 *ptr = strip_info->sx_buff;
-	__u8 *end = strip_info->sx_buff + strip_info->sx_count;
-	__u8 sendername[32], *sptr = sendername;
-	MetricomKey key;
-
-	/*HexDump("Receiving", strip_info, ptr, end); */
-
-	/* Check for start of address marker, and then skip over it */
-	if (*ptr == '*')
-		ptr++;
-	else {
-		process_text_message(strip_info);
-		return;
-	}
-
-	/* Copy out the return address */
-	while (ptr < end && *ptr != '*'
-	       && sptr < ARRAY_END(sendername) - 1)
-		*sptr++ = *ptr++;
-	*sptr = 0;		/* Null terminate the sender name */
-
-	/* Check for end of address marker, and skip over it */
-	if (ptr >= end || *ptr != '*') {
-		RecvErr("No second *", strip_info);
-		return;
-	}
-	ptr++;			/* Skip the second '*' */
-
-	/* If the sender name is "&COMMAND", ignore this 'packet'       */
-	/* (This is here for backwards compatibility with old firmware) */
-	if (!strcmp(sendername, "&COMMAND")) {
-		strip_info->firmware_level = NoStructure;
-		strip_info->next_command = CompatibilityCommand;
-		return;
-	}
-
-	if (ptr + 4 > end) {
-		RecvErr("No proto key", strip_info);
-		return;
-	}
-
-	/* Get the protocol key out of the buffer */
-	key.c[0] = *ptr++;
-	key.c[1] = *ptr++;
-	key.c[2] = *ptr++;
-	key.c[3] = *ptr++;
-
-	/* If we're using checksums, verify the checksum at the end of the packet */
-	if (strip_info->firmware_level >= ChecksummedMessages) {
-		end -= 4;	/* Chop the last four bytes off the packet (they're the checksum) */
-		if (ptr > end) {
-			RecvErr("Missing Checksum", strip_info);
-			return;
-		}
-		if (!verify_checksum(strip_info)) {
-			RecvErr("Bad Checksum", strip_info);
-			return;
-		}
-	}
-
-	/*printk(KERN_INFO "%s: Got packet from \"%s\".\n", strip_info->dev->name, sendername); */
-
-	/*
-	 * Fill in (pseudo) source and destination addresses in the packet.
-	 * We assume that the destination address was our address (the radio does not
-	 * tell us this). If the radio supplies a source address, then we use it.
-	 */
-	header.dst_addr = strip_info->true_dev_addr;
-	string_to_radio_address(&header.src_addr, sendername);
-
-#ifdef EXT_COUNTERS
-	if (key.l == SIP0Key.l) {
-		strip_info->rx_rbytes += (end - ptr);
-		process_IP_packet(strip_info, &header, ptr, end);
-	} else if (key.l == ARP0Key.l) {
-		strip_info->rx_rbytes += (end - ptr);
-		process_ARP_packet(strip_info, &header, ptr, end);
-	} else if (key.l == ATR_Key.l) {
-		strip_info->rx_ebytes += (end - ptr);
-		process_AT_response(strip_info, ptr, end);
-	} else if (key.l == ACK_Key.l) {
-		strip_info->rx_ebytes += (end - ptr);
-		process_ACK(strip_info, ptr, end);
-	} else if (key.l == INF_Key.l) {
-		strip_info->rx_ebytes += (end - ptr);
-		process_Info(strip_info, ptr, end);
-	} else if (key.l == ERR_Key.l) {
-		strip_info->rx_ebytes += (end - ptr);
-		RecvErr_Message(strip_info, sendername, ptr, end - ptr);
-	} else
-		RecvErr("Unrecognized protocol key", strip_info);
-#else
-	if (key.l == SIP0Key.l)
-		process_IP_packet(strip_info, &header, ptr, end);
-	else if (key.l == ARP0Key.l)
-		process_ARP_packet(strip_info, &header, ptr, end);
-	else if (key.l == ATR_Key.l)
-		process_AT_response(strip_info, ptr, end);
-	else if (key.l == ACK_Key.l)
-		process_ACK(strip_info, ptr, end);
-	else if (key.l == INF_Key.l)
-		process_Info(strip_info, ptr, end);
-	else if (key.l == ERR_Key.l)
-		RecvErr_Message(strip_info, sendername, ptr, end - ptr);
-	else
-		RecvErr("Unrecognized protocol key", strip_info);
-#endif
-}
-
-#define TTYERROR(X) ((X) == TTY_BREAK   ? "Break"            : \
-                     (X) == TTY_FRAME   ? "Framing Error"    : \
-                     (X) == TTY_PARITY  ? "Parity Error"     : \
-                     (X) == TTY_OVERRUN ? "Hardware Overrun" : "Unknown Error")
-
-/*
- * Handle the 'receiver data ready' interrupt.
- * This function is called by the 'tty_io' module in the kernel when
- * a block of STRIP data has been received, which can now be decapsulated
- * and sent on to some IP layer for further processing.
- */
-
-static void strip_receive_buf(struct tty_struct *tty, const unsigned char *cp,
-		  char *fp, int count)
-{
-	struct strip *strip_info = (struct strip *) tty->disc_data;
-	const unsigned char *end = cp + count;
-
-	if (!strip_info || strip_info->magic != STRIP_MAGIC
-	    || !netif_running(strip_info->dev))
-		return;
-
-	spin_lock_bh(&strip_lock);
-#if 0
-	{
-		struct timeval tv;
-		do_gettimeofday(&tv);
-		printk(KERN_INFO
-		       "**** strip_receive_buf: %3d bytes at %02d.%06d\n",
-		       count, tv.tv_sec % 100, tv.tv_usec);
-	}
-#endif
-
-#ifdef EXT_COUNTERS
-	strip_info->rx_sbytes += count;
-#endif
-
-	/* Read the characters out of the buffer */
-	while (cp < end) {
-		if (fp && *fp)
-			printk(KERN_INFO "%s: %s on serial port\n",
-			       strip_info->dev->name, TTYERROR(*fp));
-		if (fp && *fp++ && !strip_info->discard) {	/* If there's a serial error, record it */
-			/* If we have some characters in the buffer, discard them */
-			strip_info->discard = strip_info->sx_count;
-			strip_info->rx_errors++;
-		}
-
-		/* Leading control characters (CR, NL, Tab, etc.) are ignored */
-		if (strip_info->sx_count > 0 || *cp >= ' ') {
-			if (*cp == 0x0D) {	/* If end of packet, decide what to do with it */
-				if (strip_info->sx_count > 3000)
-					printk(KERN_INFO
-					       "%s: Cut a %d byte packet (%zd bytes remaining)%s\n",
-					       strip_info->dev->name,
-					       strip_info->sx_count,
-					       end - cp - 1,
-					       strip_info->
-					       discard ? " (discarded)" :
-					       "");
-				if (strip_info->sx_count >
-				    strip_info->sx_size) {
-					strip_info->rx_over_errors++;
-					printk(KERN_INFO
-					       "%s: sx_buff overflow (%d bytes total)\n",
-					       strip_info->dev->name,
-					       strip_info->sx_count);
-				} else if (strip_info->discard)
-					printk(KERN_INFO
-					       "%s: Discarding bad packet (%d/%d)\n",
-					       strip_info->dev->name,
-					       strip_info->discard,
-					       strip_info->sx_count);
-				else
-					process_message(strip_info);
-				strip_info->discard = 0;
-				strip_info->sx_count = 0;
-			} else {
-				/* Make sure we have space in the buffer */
-				if (strip_info->sx_count <
-				    strip_info->sx_size)
-					strip_info->sx_buff[strip_info->
-							    sx_count] =
-					    *cp;
-				strip_info->sx_count++;
-			}
-		}
-		cp++;
-	}
-	spin_unlock_bh(&strip_lock);
-}
-
-
-/************************************************************************/
-/* General control routines						*/
-
-static int set_mac_address(struct strip *strip_info,
-			   MetricomAddress * addr)
-{
-	/*
-	 * We're using a manually specified address if the address is set
-	 * to anything other than all ones. Setting the address to all ones
-	 * disables manual mode and goes back to automatic address determination
-	 * (tracking the true address that the radio has).
-	 */
-	strip_info->manual_dev_addr =
-	    memcmp(addr->c, broadcast_address.c,
-		   sizeof(broadcast_address));
-	if (strip_info->manual_dev_addr)
-		*(MetricomAddress *) strip_info->dev->dev_addr = *addr;
-	else
-		*(MetricomAddress *) strip_info->dev->dev_addr =
-		    strip_info->true_dev_addr;
-	return 0;
-}
-
-static int strip_set_mac_address(struct net_device *dev, void *addr)
-{
-	struct strip *strip_info = netdev_priv(dev);
-	struct sockaddr *sa = addr;
-	printk(KERN_INFO "%s: strip_set_dev_mac_address called\n", dev->name);
-	set_mac_address(strip_info, (MetricomAddress *) sa->sa_data);
-	return 0;
-}
-
-static struct net_device_stats *strip_get_stats(struct net_device *dev)
-{
-	struct strip *strip_info = netdev_priv(dev);
-	static struct net_device_stats stats;
-
-	memset(&stats, 0, sizeof(struct net_device_stats));
-
-	stats.rx_packets = strip_info->rx_packets;
-	stats.tx_packets = strip_info->tx_packets;
-	stats.rx_dropped = strip_info->rx_dropped;
-	stats.tx_dropped = strip_info->tx_dropped;
-	stats.tx_errors = strip_info->tx_errors;
-	stats.rx_errors = strip_info->rx_errors;
-	stats.rx_over_errors = strip_info->rx_over_errors;
-	return (&stats);
-}
-
-
-/************************************************************************/
-/* Opening and closing							*/
-
-/*
- * Here's the order things happen:
- * When the user runs "slattach -p strip ..."
- *  1. The TTY module calls strip_open;;
- *  2. strip_open calls strip_alloc
- *  3.                  strip_alloc calls register_netdev
- *  4.                  register_netdev calls strip_dev_init
- *  5. then strip_open finishes setting up the strip_info
- *
- * When the user runs "ifconfig st<x> up address netmask ..."
- *  6. strip_open_low gets called
- *
- * When the user runs "ifconfig st<x> down"
- *  7. strip_close_low gets called
- *
- * When the user kills the slattach process
- *  8. strip_close gets called
- *  9. strip_close calls dev_close
- * 10. if the device is still up, then dev_close calls strip_close_low
- * 11. strip_close calls strip_free
- */
-
-/* Open the low-level part of the STRIP channel. Easy! */
-
-static int strip_open_low(struct net_device *dev)
-{
-	struct strip *strip_info = netdev_priv(dev);
-
-	if (strip_info->tty == NULL)
-		return (-ENODEV);
-
-	if (!allocate_buffers(strip_info, dev->mtu))
-		return (-ENOMEM);
-
-	strip_info->sx_count = 0;
-	strip_info->tx_left = 0;
-
-	strip_info->discard = 0;
-	strip_info->working = FALSE;
-	strip_info->firmware_level = NoStructure;
-	strip_info->next_command = CompatibilityCommand;
-	strip_info->user_baud = tty_get_baud_rate(strip_info->tty);
-
-	printk(KERN_INFO "%s: Initializing Radio.\n",
-	       strip_info->dev->name);
-	ResetRadio(strip_info);
-	strip_info->idle_timer.expires = jiffies + 1 * HZ;
-	add_timer(&strip_info->idle_timer);
-	netif_wake_queue(dev);
-	return (0);
-}
-
-
-/*
- * Close the low-level part of the STRIP channel. Easy!
- */
-
-static int strip_close_low(struct net_device *dev)
-{
-	struct strip *strip_info = netdev_priv(dev);
-
-	if (strip_info->tty == NULL)
-		return -EBUSY;
-	strip_info->tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP);
-
-	netif_stop_queue(dev);
-
-	/*
-	 * Free all STRIP frame buffers.
-	 */
-	kfree(strip_info->rx_buff);
-	strip_info->rx_buff = NULL;
-	kfree(strip_info->sx_buff);
-	strip_info->sx_buff = NULL;
-	kfree(strip_info->tx_buff);
-	strip_info->tx_buff = NULL;
-
-	del_timer(&strip_info->idle_timer);
-	return 0;
-}
-
-static const struct header_ops strip_header_ops = {
-	.create = strip_header,
-	.rebuild = strip_rebuild_header,
-};
-
-/*
- * This routine is called by DDI when the
- * (dynamically assigned) device is registered
- */
-
-static void strip_dev_setup(struct net_device *dev)
-{
-	/*
-	 * Finish setting up the DEVICE info.
-	 */
-
-	dev->trans_start = 0;
-	dev->last_rx = 0;
-	dev->tx_queue_len = 30;	/* Drop after 30 frames queued */
-
-	dev->flags = 0;
-	dev->mtu = DEFAULT_STRIP_MTU;
-	dev->type = ARPHRD_METRICOM;	/* dtang */
-	dev->hard_header_len = sizeof(STRIP_Header);
-	/*
-	 *  dev->priv             Already holds a pointer to our struct strip
-	 */
-
-	*(MetricomAddress *) & dev->broadcast = broadcast_address;
-	dev->dev_addr[0] = 0;
-	dev->addr_len = sizeof(MetricomAddress);
-
-	/*
-	 * Pointers to interface service routines.
-	 */
-
-	dev->open = strip_open_low;
-	dev->stop = strip_close_low;
-	dev->hard_start_xmit = strip_xmit;
-	dev->header_ops = &strip_header_ops;
-
-	dev->set_mac_address = strip_set_mac_address;
-	dev->get_stats = strip_get_stats;
-	dev->change_mtu = strip_change_mtu;
-}
-
-/*
- * Free a STRIP channel.
- */
-
-static void strip_free(struct strip *strip_info)
-{
-	spin_lock_bh(&strip_lock);
-	list_del_rcu(&strip_info->list);
-	spin_unlock_bh(&strip_lock);
-
-	strip_info->magic = 0;
-
-	free_netdev(strip_info->dev);
-}
-
-
-/*
- * Allocate a new free STRIP channel
- */
-static struct strip *strip_alloc(void)
-{
-	struct list_head *n;
-	struct net_device *dev;
-	struct strip *strip_info;
-
-	dev = alloc_netdev(sizeof(struct strip), "st%d",
-			   strip_dev_setup);
-
-	if (!dev)
-		return NULL;	/* If no more memory, return */
-
-
-	strip_info = netdev_priv(dev);
-	strip_info->dev = dev;
-
-	strip_info->magic = STRIP_MAGIC;
-	strip_info->tty = NULL;
-
-	strip_info->gratuitous_arp = jiffies + LongTime;
-	strip_info->arp_interval = 0;
-	init_timer(&strip_info->idle_timer);
-	strip_info->idle_timer.data = (long) dev;
-	strip_info->idle_timer.function = strip_IdleTask;
-
-
-	spin_lock_bh(&strip_lock);
- rescan:
-	/*
-	 * Search the list to find where to put our new entry
-	 * (and in the process decide what channel number it is
-	 * going to be)
-	 */
-	list_for_each(n, &strip_list) {
-		struct strip *s = hlist_entry(n, struct strip, list);
-
-		if (s->dev->base_addr == dev->base_addr) {
-			++dev->base_addr;
-			goto rescan;
-		}
-	}
-
-	sprintf(dev->name, "st%ld", dev->base_addr);
-
-	list_add_tail_rcu(&strip_info->list, &strip_list);
-	spin_unlock_bh(&strip_lock);
-
-	return strip_info;
-}
-
-/*
- * Open the high-level part of the STRIP channel.
- * This function is called by the TTY module when the
- * STRIP line discipline is called for.  Because we are
- * sure the tty line exists, we only have to link it to
- * a free STRIP channel...
- */
-
-static int strip_open(struct tty_struct *tty)
-{
-	struct strip *strip_info = (struct strip *) tty->disc_data;
-
-	/*
-	 * First make sure we're not already connected.
-	 */
-
-	if (strip_info && strip_info->magic == STRIP_MAGIC)
-		return -EEXIST;
-
-	/*
-	 * We need a write method.
-	 */
-
-	if (tty->ops->write == NULL || tty->ops->set_termios == NULL)
-		return -EOPNOTSUPP;
-
-	/*
-	 * OK.  Find a free STRIP channel to use.
-	 */
-	if ((strip_info = strip_alloc()) == NULL)
-		return -ENFILE;
-
-	/*
-	 * Register our newly created device so it can be ifconfig'd
-	 * strip_dev_init() will be called as a side-effect
-	 */
-
-	if (register_netdev(strip_info->dev) != 0) {
-		printk(KERN_ERR "strip: register_netdev() failed.\n");
-		strip_free(strip_info);
-		return -ENFILE;
-	}
-
-	strip_info->tty = tty;
-	tty->disc_data = strip_info;
-	tty->receive_room = 65536;
-
-	tty_driver_flush_buffer(tty);
-
-	/*
-	 * Restore default settings
-	 */
-
-	strip_info->dev->type = ARPHRD_METRICOM;	/* dtang */
-
-	/*
-	 * Set tty options
-	 */
-
-	tty->termios->c_iflag |= IGNBRK | IGNPAR;	/* Ignore breaks and parity errors. */
-	tty->termios->c_cflag |= CLOCAL;	/* Ignore modem control signals. */
-	tty->termios->c_cflag &= ~HUPCL;	/* Don't close on hup */
-
-	printk(KERN_INFO "STRIP: device \"%s\" activated\n",
-	       strip_info->dev->name);
-
-	/*
-	 * Done.  We have linked the TTY line to a channel.
-	 */
-	return (strip_info->dev->base_addr);
-}
-
-/*
- * Close down a STRIP channel.
- * This means flushing out any pending queues, and then restoring the
- * TTY line discipline to what it was before it got hooked to STRIP
- * (which usually is TTY again).
- */
-
-static void strip_close(struct tty_struct *tty)
-{
-	struct strip *strip_info = (struct strip *) tty->disc_data;
-
-	/*
-	 * First make sure we're connected.
-	 */
-
-	if (!strip_info || strip_info->magic != STRIP_MAGIC)
-		return;
-
-	unregister_netdev(strip_info->dev);
-
-	tty->disc_data = NULL;
-	strip_info->tty = NULL;
-	printk(KERN_INFO "STRIP: device \"%s\" closed down\n",
-	       strip_info->dev->name);
-	strip_free(strip_info);
-	tty->disc_data = NULL;
-}
-
-
-/************************************************************************/
-/* Perform I/O control calls on an active STRIP channel.		*/
-
-static int strip_ioctl(struct tty_struct *tty, struct file *file,
-		       unsigned int cmd, unsigned long arg)
-{
-	struct strip *strip_info = (struct strip *) tty->disc_data;
-
-	/*
-	 * First make sure we're connected.
-	 */
-
-	if (!strip_info || strip_info->magic != STRIP_MAGIC)
-		return -EINVAL;
-
-	switch (cmd) {
-	case SIOCGIFNAME:
-		if(copy_to_user((void __user *) arg, strip_info->dev->name, strlen(strip_info->dev->name) + 1))
-			return -EFAULT;
-		break;
-	case SIOCSIFHWADDR:
-	{
-		MetricomAddress addr;
-		//printk(KERN_INFO "%s: SIOCSIFHWADDR\n", strip_info->dev->name);
-		if(copy_from_user(&addr, (void __user *) arg, sizeof(MetricomAddress)))
-			return -EFAULT;
-		return set_mac_address(strip_info, &addr);
-	}
-	default:
-		return tty_mode_ioctl(tty, file, cmd, arg);
-		break;
-	}
-	return 0;
-}
-
-
-/************************************************************************/
-/* Initialization							*/
-
-static struct tty_ldisc strip_ldisc = {
-	.magic = TTY_LDISC_MAGIC,
-	.name = "strip",
-	.owner = THIS_MODULE,
-	.open = strip_open,
-	.close = strip_close,
-	.ioctl = strip_ioctl,
-	.receive_buf = strip_receive_buf,
-	.write_wakeup = strip_write_some_more,
-};
-
-/*
- * Initialize the STRIP driver.
- * This routine is called at boot time, to bootstrap the multi-channel
- * STRIP driver
- */
-
-static char signon[] __initdata =
-    KERN_INFO "STRIP: Version %s (unlimited channels)\n";
-
-static int __init strip_init_driver(void)
-{
-	int status;
-
-	printk(signon, StripVersion);
-
-	
-	/*
-	 * Fill in our line protocol discipline, and register it
-	 */
-	if ((status = tty_register_ldisc(N_STRIP, &strip_ldisc)))
-		printk(KERN_ERR "STRIP: can't register line discipline (err = %d)\n",
-		       status);
-
-	/*
-	 * Register the status file with /proc
-	 */
-	proc_net_fops_create(&init_net, "strip", S_IFREG | S_IRUGO, &strip_seq_fops);
-
-	return status;
-}
-
-module_init(strip_init_driver);
-
-static const char signoff[] __exitdata =
-    KERN_INFO "STRIP: Module Unloaded\n";
-
-static void __exit strip_exit_driver(void)
-{
-	int i;
-	struct list_head *p,*n;
-
-	/* module ref count rules assure that all entries are unregistered */
-	list_for_each_safe(p, n, &strip_list) {
-		struct strip *s = list_entry(p, struct strip, list);
-		strip_free(s);
-	}
-
-	/* Unregister with the /proc/net file here. */
-	proc_net_remove(&init_net, "strip");
-
-	if ((i = tty_unregister_ldisc(N_STRIP)))
-		printk(KERN_ERR "STRIP: can't unregister line discipline (err = %d)\n", i);
-
-	printk(signoff);
-}
-
-module_exit(strip_exit_driver);
-
-MODULE_AUTHOR("Stuart Cheshire <cheshire@cs.stanford.edu>");
-MODULE_DESCRIPTION("Starmode Radio IP (STRIP) Device Driver");
-MODULE_LICENSE("Dual BSD/GPL");
-
-MODULE_SUPPORTED_DEVICE("Starmode Radio IP (STRIP) modem");
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 42a36b3..3771419 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -1624,25 +1624,25 @@ static int wl3501_get_scan(struct net_device *dev, struct iw_request_info *info,
 		iwe.cmd			= SIOCGIWAP;
 		iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
 		memcpy(iwe.u.ap_addr.sa_data, this->bss_set[i].bssid, ETH_ALEN);
-		current_ev = iwe_stream_add_event(current_ev,
+		current_ev = iwe_stream_add_event(info, current_ev,
 						  extra + IW_SCAN_MAX_DATA,
 						  &iwe, IW_EV_ADDR_LEN);
 		iwe.cmd		  = SIOCGIWESSID;
 		iwe.u.data.flags  = 1;
 		iwe.u.data.length = this->bss_set[i].ssid.el.len;
-		current_ev = iwe_stream_add_point(current_ev,
+		current_ev = iwe_stream_add_point(info, current_ev,
 						  extra + IW_SCAN_MAX_DATA,
 						  &iwe,
 						  this->bss_set[i].ssid.essid);
 		iwe.cmd	   = SIOCGIWMODE;
 		iwe.u.mode = this->bss_set[i].bss_type;
-		current_ev = iwe_stream_add_event(current_ev,
+		current_ev = iwe_stream_add_event(info, current_ev,
 						  extra + IW_SCAN_MAX_DATA,
 						  &iwe, IW_EV_UINT_LEN);
 		iwe.cmd = SIOCGIWFREQ;
 		iwe.u.freq.m = this->bss_set[i].ds_pset.chan;
 		iwe.u.freq.e = 0;
-		current_ev = iwe_stream_add_event(current_ev,
+		current_ev = iwe_stream_add_event(info, current_ev,
 						  extra + IW_SCAN_MAX_DATA,
 						  &iwe, IW_EV_FREQ_LEN);
 		iwe.cmd = SIOCGIWENCODE;
@@ -1651,7 +1651,7 @@ static int wl3501_get_scan(struct net_device *dev, struct iw_request_info *info,
 		else
 			iwe.u.data.flags = IW_ENCODE_DISABLED;
 		iwe.u.data.length = 0;
-		current_ev = iwe_stream_add_point(current_ev,
+		current_ev = iwe_stream_add_point(info, current_ev,
 						  extra + IW_SCAN_MAX_DATA,
 						  &iwe, NULL);
 	}
diff --git a/drivers/net/wireless/zd1201.c b/drivers/net/wireless/zd1201.c
index d5c0c66..07e4d1f 100644
--- a/drivers/net/wireless/zd1201.c
+++ b/drivers/net/wireless/zd1201.c
@@ -1152,32 +1152,36 @@ static int zd1201_get_scan(struct net_device *dev,
 		iwe.cmd = SIOCGIWAP;
 		iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
 		memcpy(iwe.u.ap_addr.sa_data, zd->rxdata+i+6, 6);
-		cev = iwe_stream_add_event(cev, end_buf, &iwe, IW_EV_ADDR_LEN);
+		cev = iwe_stream_add_event(info, cev, end_buf,
+					   &iwe, IW_EV_ADDR_LEN);
 
 		iwe.cmd = SIOCGIWESSID;
 		iwe.u.data.length = zd->rxdata[i+16];
 		iwe.u.data.flags = 1;
-		cev = iwe_stream_add_point(cev, end_buf, &iwe, zd->rxdata+i+18);
+		cev = iwe_stream_add_point(info, cev, end_buf,
+					   &iwe, zd->rxdata+i+18);
 
 		iwe.cmd = SIOCGIWMODE;
 		if (zd->rxdata[i+14]&0x01)
 			iwe.u.mode = IW_MODE_MASTER;
 		else
 			iwe.u.mode = IW_MODE_ADHOC;
-		cev = iwe_stream_add_event(cev, end_buf, &iwe, IW_EV_UINT_LEN);
+		cev = iwe_stream_add_event(info, cev, end_buf,
+					   &iwe, IW_EV_UINT_LEN);
 		
 		iwe.cmd = SIOCGIWFREQ;
 		iwe.u.freq.m = zd->rxdata[i+0];
 		iwe.u.freq.e = 0;
-		cev = iwe_stream_add_event(cev, end_buf, &iwe, IW_EV_FREQ_LEN);
+		cev = iwe_stream_add_event(info, cev, end_buf,
+					   &iwe, IW_EV_FREQ_LEN);
 		
 		iwe.cmd = SIOCGIWRATE;
 		iwe.u.bitrate.fixed = 0;
 		iwe.u.bitrate.disabled = 0;
 		for (j=0; j<10; j++) if (zd->rxdata[i+50+j]) {
 			iwe.u.bitrate.value = (zd->rxdata[i+50+j]&0x7f)*500000;
-			cev=iwe_stream_add_event(cev, end_buf, &iwe,
-			    IW_EV_PARAM_LEN);
+			cev = iwe_stream_add_event(info, cev, end_buf,
+						   &iwe, IW_EV_PARAM_LEN);
 		}
 		
 		iwe.cmd = SIOCGIWENCODE;
@@ -1186,14 +1190,15 @@ static int zd1201_get_scan(struct net_device *dev,
 			iwe.u.data.flags = IW_ENCODE_ENABLED;
 		else
 			iwe.u.data.flags = IW_ENCODE_DISABLED;
-		cev = iwe_stream_add_point(cev, end_buf, &iwe, NULL);
+		cev = iwe_stream_add_point(info, cev, end_buf, &iwe, NULL);
 		
 		iwe.cmd = IWEVQUAL;
 		iwe.u.qual.qual = zd->rxdata[i+4];
 		iwe.u.qual.noise= zd->rxdata[i+2]/10-100;
 		iwe.u.qual.level = (256+zd->rxdata[i+4]*100)/255-100;
 		iwe.u.qual.updated = 7;
-		cev = iwe_stream_add_event(cev, end_buf, &iwe, IW_EV_QUAL_LEN);
+		cev = iwe_stream_add_event(info, cev, end_buf,
+					   &iwe, IW_EV_QUAL_LEN);
 	}
 
 	if (!enabled_save)
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 6d86b36..317c5e2 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -376,8 +376,6 @@ static int zd_calc_tx_length_us(u8 *service, u8 zd_rate, u16 tx_length)
 static void cs_set_control(struct zd_mac *mac, struct zd_ctrlset *cs,
 	                   struct ieee80211_hdr *header, u32 flags)
 {
-	u16 fctl = le16_to_cpu(header->frame_control);
-
 	/*
 	 * CONTROL TODO:
 	 * - if backoff needed, enable bit 0
@@ -395,8 +393,7 @@ static void cs_set_control(struct zd_mac *mac, struct zd_ctrlset *cs,
 		cs->control |= ZD_CS_MULTICAST;
 
 	/* PS-POLL */
-	if ((fctl & (IEEE80211_FCTL_FTYPE|IEEE80211_FCTL_STYPE)) ==
-	    (IEEE80211_FTYPE_CTL|IEEE80211_STYPE_PSPOLL))
+	if (ieee80211_is_pspoll(header->frame_control))
 		cs->control |= ZD_CS_PS_POLL_FRAME;
 
 	if (flags & IEEE80211_TX_CTL_USE_RTS_CTS)
@@ -550,13 +547,11 @@ static int zd_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 static int filter_ack(struct ieee80211_hw *hw, struct ieee80211_hdr *rx_hdr,
 		      struct ieee80211_rx_status *stats)
 {
-	u16 fc = le16_to_cpu(rx_hdr->frame_control);
 	struct sk_buff *skb;
 	struct sk_buff_head *q;
 	unsigned long flags;
 
-	if ((fc & (IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) !=
-	    (IEEE80211_FTYPE_CTL | IEEE80211_STYPE_ACK))
+	if (!ieee80211_is_ack(rx_hdr->frame_control))
 		return 0;
 
 	q = &zd_hw_mac(hw)->ack_wait_queue;
@@ -584,8 +579,8 @@ int zd_mac_rx(struct ieee80211_hw *hw, const u8 *buffer, unsigned int length)
 	const struct rx_status *status;
 	struct sk_buff *skb;
 	int bad_frame = 0;
-	u16 fc;
-	bool is_qos, is_4addr, need_padding;
+	__le16 fc;
+	int need_padding;
 	int i;
 	u8 rate;
 
@@ -644,13 +639,8 @@ int zd_mac_rx(struct ieee80211_hw *hw, const u8 *buffer, unsigned int length)
 			&& !mac->pass_ctrl)
 		return 0;
 
-	fc = le16_to_cpu(*((__le16 *) buffer));
-
-	is_qos = ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA) &&
-		 (fc & IEEE80211_STYPE_QOS_DATA);
-	is_4addr = (fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) ==
-		   (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS);
-	need_padding = is_qos ^ is_4addr;
+	fc = *(__le16 *)buffer;
+	need_padding = ieee80211_is_data_qos(fc) ^ ieee80211_has_a4(fc);
 
 	skb = dev_alloc_skb(length + (need_padding ? 2 : 0));
 	if (skb == NULL)