Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6

10 files changed, 53 insertions, 73 deletions

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index f00f5c7..2e767cf 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1310,6 +1310,16 @@ static void ath9k_hw_override_ini(struct ath_hw *ah,
 	 * Necessary to avoid issues on AR5416 2.0
 	 */
 	REG_WRITE(ah, 0x9800 + (651 << 2), 0x11);
+
+	/*
+	 * Disable RIFS search on some chips to avoid baseband
+	 * hang issues.
+	 */
+	if (AR_SREV_9100(ah) || AR_SREV_9160(ah)) {
+		val = REG_READ(ah, AR_PHY_HEAVY_CLIP_FACTOR_RIFS);
+		val &= ~AR_PHY_RIFS_INIT_DELAY;
+		REG_WRITE(ah, AR_PHY_HEAVY_CLIP_FACTOR_RIFS, val);
+	}
 }
 
 static u32 ath9k_hw_def_ini_fixup(struct ath_hw *ah,
diff --git a/drivers/net/wireless/ath/ath9k/phy.h b/drivers/net/wireless/ath/ath9k/phy.h
index 31de27d..0999a49 100644
--- a/drivers/net/wireless/ath/ath9k/phy.h
+++ b/drivers/net/wireless/ath/ath9k/phy.h
@@ -384,6 +384,9 @@ bool ath9k_hw_set_rf_regs(struct ath_hw *ah,
 
 #define AR_PHY_HEAVY_CLIP_ENABLE         0x99E0
 
+#define AR_PHY_HEAVY_CLIP_FACTOR_RIFS    0x99EC
+#define AR_PHY_RIFS_INIT_DELAY         0x03ff0000
+
 #define AR_PHY_M_SLEEP      0x99f0
 #define AR_PHY_REFCLKDLY    0x99f4
 #define AR_PHY_REFCLKPD     0x99f8
diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
index 073be56..0a00d42 100644
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -3,7 +3,6 @@ config B43
 	depends on SSB_POSSIBLE && MAC80211 && HAS_DMA
 	select SSB
 	select FW_LOADER
-	select SSB_BLOCKIO
 	---help---
 	  b43 is a driver for the Broadcom 43xx series wireless devices.
 
@@ -79,6 +78,14 @@ config B43_SDIO
 
 	  If unsure, say N.
 
+#Data transfers to the device via PIO. We want it as a fallback even
+# if we can do DMA.
+config B43_PIO
+	bool
+	depends on B43
+	select SSB_BLOCKIO
+	default y
+
 config B43_NPHY
 	bool "Pre IEEE 802.11n support (BROKEN)"
 	depends on B43 && EXPERIMENTAL && BROKEN
@@ -130,4 +137,12 @@ config B43_DEBUG
 	  for production use.
 	  Only say Y, if you are debugging a problem in the b43 driver sourcecode.
 
+config B43_FORCE_PIO
+	bool "Force usage of PIO instead of DMA"
+	depends on B43 && B43_DEBUG
+	---help---
+	  This will disable DMA and always enable PIO instead.
 
+	  Say N!
+	  This is only for debugging the PIO engine code. You do
+	  _NOT_ want to enable this.
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index 6a6ab0f..b8807fb 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -702,6 +702,7 @@ struct b43_wldev {
 	bool radio_hw_enable;	/* saved state of radio hardware enabled state */
 	bool qos_enabled;		/* TRUE, if QoS is used. */
 	bool hwcrypto_enabled;		/* TRUE, if HW crypto acceleration is enabled. */
+	bool use_pio;			/* TRUE if next init should use PIO */
 
 	/* PHY/Radio device. */
 	struct b43_phy phy;
@@ -886,6 +887,12 @@ static inline bool b43_using_pio_transfers(struct b43_wldev *dev)
 	return dev->__using_pio_transfers;
 }
 
+#ifdef CONFIG_B43_FORCE_PIO
+# define B43_PIO_DEFAULT 1
+#else
+# define B43_PIO_DEFAULT 0
+#endif
+
 /* Message printing */
 void b43info(struct b43_wl *wl, const char *fmt, ...)
     __attribute__ ((format(printf, 2, 3)));
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index aa33d74..1521b1e 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -107,9 +107,9 @@ int b43_modparam_verbose = B43_VERBOSITY_DEFAULT;
 module_param_named(verbose, b43_modparam_verbose, int, 0644);
 MODULE_PARM_DESC(verbose, "Log message verbosity: 0=error, 1=warn, 2=info(default), 3=debug");
 
-static int modparam_pio;
-module_param_named(pio, modparam_pio, int, 0444);
-MODULE_PARM_DESC(pio, "enable(1) / disable(0) PIO mode");
+int b43_modparam_pio = B43_PIO_DEFAULT;
+module_param_named(pio, b43_modparam_pio, int, 0644);
+MODULE_PARM_DESC(pio, "Use PIO accesses by default: 0=DMA, 1=PIO");
 
 static const struct ssb_device_id b43_ssb_tbl[] = {
 	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 5),
@@ -1804,8 +1804,9 @@ static void b43_do_interrupt_thread(struct b43_wldev *dev)
 			       dma_reason[4], dma_reason[5]);
 			b43err(dev->wl, "This device does not support DMA "
 			       "on your system. Please use PIO instead.\n");
-			b43err(dev->wl, "Unload the b43 module and reload "
-			       "with 'pio=1'\n");
+			/* Fall back to PIO transfers if we get fatal DMA errors! */
+			dev->use_pio = 1;
+			b43_controller_restart(dev, "DMA error");
 			return;
 		}
 		if (merged_dma_reason & B43_DMAIRQ_NONFATALMASK) {
@@ -4357,7 +4358,7 @@ static int b43_wireless_core_init(struct b43_wldev *dev)
 
 	if ((dev->dev->bus->bustype == SSB_BUSTYPE_PCMCIA) ||
 	    (dev->dev->bus->bustype == SSB_BUSTYPE_SDIO) ||
-	    modparam_pio) {
+	    dev->use_pio) {
 		dev->__using_pio_transfers = 1;
 		err = b43_pio_init(dev);
 	} else {
@@ -4824,6 +4825,7 @@ static int b43_one_core_attach(struct ssb_device *dev, struct b43_wl *wl)
 	if (!wldev)
 		goto out;
 
+	wldev->use_pio = b43_modparam_pio;
 	wldev->dev = dev;
 	wldev->wl = wl;
 	b43_set_status(wldev, B43_STAT_UNINIT);
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index af60b17..6aeb82b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -2941,21 +2941,10 @@ static int iwl_mac_ampdu_action(struct ieee80211_hw *hw,
 			return ret;
 	case IEEE80211_AMPDU_TX_START:
 		IWL_DEBUG_HT(priv, "start Tx\n");
-		ret = iwl_tx_agg_start(priv, sta->addr, tid, ssn);
-		if (ret == 0) {
-			priv->agg_tids_count++;
-			IWL_DEBUG_HT(priv, "priv->agg_tids_count = %u\n",
-				priv->agg_tids_count);
-		}
-		return ret;
+		return iwl_tx_agg_start(priv, sta->addr, tid, ssn);
 	case IEEE80211_AMPDU_TX_STOP:
 		IWL_DEBUG_HT(priv, "stop Tx\n");
 		ret = iwl_tx_agg_stop(priv, sta->addr, tid);
-		if ((ret == 0) && (priv->agg_tids_count > 0)) {
-			priv->agg_tids_count--;
-			IWL_DEBUG_HT(priv, "priv->agg_tids_count = %u\n",
-				priv->agg_tids_count);
-		}
 		if (test_bit(STATUS_EXIT_PENDING, &priv->status))
 			return 0;
 		else
@@ -3376,7 +3365,6 @@ static int iwl_init_drv(struct iwl_priv *priv)
 	priv->iw_mode = NL80211_IFTYPE_STATION;
 	priv->current_ht_config.smps = IEEE80211_SMPS_STATIC;
 	priv->missed_beacon_threshold = IWL_MISSED_BEACON_THRESHOLD_DEF;
-	priv->agg_tids_count = 0;
 
 	/* initialize force reset */
 	priv->force_reset[IWL_RF_RESET].reset_duration =
diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index ab3c77b..6383d9f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -2623,6 +2623,7 @@ struct iwl_ssid_ie {
 #define TX_CMD_LIFE_TIME_INFINITE	cpu_to_le32(0xFFFFFFFF)
 #define IWL_GOOD_CRC_TH			cpu_to_le16(1)
 #define IWL_MAX_SCAN_SIZE 1024
+#define IWL_MAX_CMD_SIZE 4096
 #define IWL_MAX_PROBE_REQUEST		200
 
 /*
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 7914d65..ab891b9 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -1084,9 +1084,6 @@ struct iwl_priv {
 	/* storing the jiffies when the plcp error rate is received */
 	unsigned long plcp_jiffies;
 
-	/* reporting the number of tids has AGG on. 0 means no AGGREGATION */
-	u8 agg_tids_count;
-
 	/* force reset */
 	struct iwl_force_reset force_reset[IWL_MAX_FORCE_RESET];
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index 0d09f57..df257bc 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -616,11 +616,6 @@ static void iwl_accumulative_statistics(struct iwl_priv *priv,
 
 #define REG_RECALIB_PERIOD (60)
 
-/* the threshold ratio of actual_ack_cnt to expected_ack_cnt in percent */
-#define ACK_CNT_RATIO (50)
-#define BA_TIMEOUT_CNT (5)
-#define BA_TIMEOUT_MAX (16)
-
 #define PLCP_MSG "plcp_err exceeded %u, %u, %u, %u, %u, %d, %u mSecs\n"
 void iwl_rx_statistics(struct iwl_priv *priv,
 			      struct iwl_rx_mem_buffer *rxb)
@@ -630,9 +625,6 @@ void iwl_rx_statistics(struct iwl_priv *priv,
 	int combined_plcp_delta;
 	unsigned int plcp_msec;
 	unsigned long plcp_received_jiffies;
-	int actual_ack_cnt_delta;
-	int expected_ack_cnt_delta;
-	int ba_timeout_delta;
 
 	IWL_DEBUG_RX(priv, "Statistics notification received (%d vs %d).\n",
 		     (int)sizeof(priv->statistics),
@@ -647,44 +639,6 @@ void iwl_rx_statistics(struct iwl_priv *priv,
 #ifdef CONFIG_IWLWIFI_DEBUG
 	iwl_accumulative_statistics(priv, (__le32 *)&pkt->u.stats);
 #endif
-	actual_ack_cnt_delta = le32_to_cpu(pkt->u.stats.tx.actual_ack_cnt) -
-		le32_to_cpu(priv->statistics.tx.actual_ack_cnt);
-	expected_ack_cnt_delta = le32_to_cpu(
-			pkt->u.stats.tx.expected_ack_cnt) -
-		le32_to_cpu(priv->statistics.tx.expected_ack_cnt);
-	ba_timeout_delta = le32_to_cpu(
-			pkt->u.stats.tx.agg.ba_timeout) -
-		le32_to_cpu(priv->statistics.tx.agg.ba_timeout);
-	if ((priv->agg_tids_count > 0) &&
-		(expected_ack_cnt_delta > 0) &&
-		(((actual_ack_cnt_delta * 100) / expected_ack_cnt_delta) <
-			ACK_CNT_RATIO) &&
-		(ba_timeout_delta > BA_TIMEOUT_CNT)) {
-		IWL_DEBUG_RADIO(priv,
-			"actual_ack_cnt delta = %d, expected_ack_cnt = %d\n",
-			actual_ack_cnt_delta, expected_ack_cnt_delta);
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-		IWL_DEBUG_RADIO(priv, "rx_detected_cnt delta = %d\n",
-			priv->delta_statistics.tx.rx_detected_cnt);
-		IWL_DEBUG_RADIO(priv,
-			"ack_or_ba_timeout_collision delta = %d\n",
-			priv->delta_statistics.tx.ack_or_ba_timeout_collision);
-#endif
-		IWL_DEBUG_RADIO(priv, "agg ba_timeout delta = %d\n",
-			ba_timeout_delta);
-		if ((actual_ack_cnt_delta == 0) &&
-			(ba_timeout_delta >=
-				BA_TIMEOUT_MAX)) {
-			IWL_DEBUG_RADIO(priv,
-				"call iwl_force_reset(IWL_FW_RESET)\n");
-			iwl_force_reset(priv, IWL_FW_RESET);
-		} else {
-			IWL_DEBUG_RADIO(priv,
-				"call iwl_force_reset(IWL_RF_RESET)\n");
-			iwl_force_reset(priv, IWL_RF_RESET);
-		}
-	}
 	/*
 	 * check for plcp_err and trigger radio reset if it exceeds
 	 * the plcp error threshold plcp_delta.
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 10701b8..1ed5206 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -364,7 +364,7 @@ int iwl_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq,
 	for (i = 0; i < actual_slots; i++) {
 		/* only happens for cmd queue */
 		if (i == slots_num)
-			len += IWL_MAX_SCAN_SIZE;
+			len = IWL_MAX_CMD_SIZE;
 
 		txq->cmd[i] = kmalloc(len, GFP_KERNEL);
 		if (!txq->cmd[i])
@@ -1023,9 +1023,12 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
 
 	/* If any of the command structures end up being larger than
 	 * the TFD_MAX_PAYLOAD_SIZE, and it sent as a 'small' command then
-	 * we will need to increase the size of the TFD entries */
+	 * we will need to increase the size of the TFD entries
+	 * Also, check to see if command buffer should not exceed the size
+	 * of device_cmd and max_cmd_size. */
 	BUG_ON((fix_size > TFD_MAX_PAYLOAD_SIZE) &&
 	       !(cmd->flags & CMD_SIZE_HUGE));
+	BUG_ON(fix_size > IWL_MAX_CMD_SIZE);
 
 	if (iwl_is_rfkill(priv) || iwl_is_ctkill(priv)) {
 		IWL_WARN(priv, "Not sending command - %s KILL\n",
@@ -1069,8 +1072,8 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
 	if (cmd->flags & CMD_SIZE_HUGE)
 		out_cmd->hdr.sequence |= SEQ_HUGE_FRAME;
 	len = sizeof(struct iwl_device_cmd);
-	len += (idx == TFD_CMD_SLOTS) ?  IWL_MAX_SCAN_SIZE : 0;
-
+	if (idx == TFD_CMD_SLOTS)
+		len = IWL_MAX_CMD_SIZE;
 
 #ifdef CONFIG_IWLWIFI_DEBUG
 	switch (out_cmd->hdr.cmd) {