[SCSI] aacraid: driver shutdown method

Add in pci shutdown method so that the adapter shuts down correctly and
flushes its cache. Shutdown should also disable the adapter's interrupt
when shutdown (in particularly if the driver is rmmod'd) to prevent
spurious hardware activities.

Signed-off-by: Mark Haverkamp <markh@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

5 files changed, 76 insertions, 3 deletions

diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index ddbbb85..6f4906e 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -460,6 +460,7 @@ struct adapter_ops
 {
 	void (*adapter_interrupt)(struct aac_dev *dev);
 	void (*adapter_notify)(struct aac_dev *dev, u32 event);
+	void (*adapter_disable_int)(struct aac_dev *dev);
 	int  (*adapter_sync_cmd)(struct aac_dev *dev, u32 command, u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6, u32 *status, u32 *r1, u32 *r2, u32 *r3, u32 *r4);
 	int  (*adapter_check_health)(struct aac_dev *dev);
 };
@@ -994,6 +995,9 @@ struct aac_dev
 #define aac_adapter_notify(dev, event) \
 	(dev)->a_ops.adapter_notify(dev, event)
 
+#define aac_adapter_disable_int(dev) \
+	(dev)->a_ops.adapter_disable_int(dev)
+
 #define aac_adapter_sync_cmd(dev, command, p1, p2, p3, p4, p5, p6, status, r1, r2, r3, r4) \
 	(dev)->a_ops.adapter_sync_cmd(dev, command, p1, p2, p3, p4, p5, p6, status, r1, r2, r3, r4)
 
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index b6dda99..41255f7 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -849,11 +849,12 @@ static int __devinit aac_probe_one(struct pci_dev *pdev,
 
 	return 0;
 
-out_deinit:
+ out_deinit:
 	kill_proc(aac->thread_pid, SIGKILL, 0);
 	wait_for_completion(&aac->aif_completion);
 
 	aac_send_shutdown(aac);
+	aac_adapter_disable_int(aac);
 	fib_map_free(aac);
 	pci_free_consistent(aac->pdev, aac->comm_size, aac->comm_addr, aac->comm_phys);
 	kfree(aac->queues);
@@ -870,6 +871,13 @@ out_deinit:
 	return error;
 }
 
+static void aac_shutdown(struct pci_dev *dev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(dev);
+	struct aac_dev *aac = (struct aac_dev *)shost->hostdata;
+	aac_send_shutdown(aac);
+}
+
 static void __devexit aac_remove_one(struct pci_dev *pdev)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
@@ -881,6 +889,7 @@ static void __devexit aac_remove_one(struct pci_dev *pdev)
 	wait_for_completion(&aac->aif_completion);
 
 	aac_send_shutdown(aac);
+	aac_adapter_disable_int(aac);
 	fib_map_free(aac);
 	pci_free_consistent(aac->pdev, aac->comm_size, aac->comm_addr,
 			aac->comm_phys);
@@ -901,6 +910,7 @@ static struct pci_driver aac_pci_driver = {
 	.id_table	= aac_pci_tbl,
 	.probe		= aac_probe_one,
 	.remove		= __devexit_p(aac_remove_one),
+	.shutdown 	= aac_shutdown,
 };
 
 static int __init aac_init(void)
@@ -919,6 +929,7 @@ static int __init aac_init(void)
 		printk(KERN_WARNING
 		       "aacraid: unable to register \"aac\" device.\n");
 	}
+
 	return 0;
 }
 
diff --git a/drivers/scsi/aacraid/rkt.c b/drivers/scsi/aacraid/rkt.c
index 7d68b78..557287a 100644
--- a/drivers/scsi/aacraid/rkt.c
+++ b/drivers/scsi/aacraid/rkt.c
@@ -88,6 +88,16 @@ static irqreturn_t aac_rkt_intr(int irq, void *dev_id, struct pt_regs *regs)
 }
 
 /**
+ *	aac_rkt_disable_interrupt	-	Disable interrupts
+ *	@dev: Adapter
+ */
+
+static void aac_rkt_disable_interrupt(struct aac_dev *dev)
+{
+	rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff);
+}
+
+/**
  *	rkt_sync_cmd	-	send a command and wait
  *	@dev: Adapter
  *	@command: Command to execute
@@ -412,10 +422,19 @@ int aac_rkt_init(struct aac_dev *dev)
 	 *	Fill in the function dispatch table.
 	 */
 	dev->a_ops.adapter_interrupt = aac_rkt_interrupt_adapter;
+	dev->a_ops.adapter_disable_int = aac_rkt_disable_interrupt;
 	dev->a_ops.adapter_notify = aac_rkt_notify_adapter;
 	dev->a_ops.adapter_sync_cmd = rkt_sync_cmd;
 	dev->a_ops.adapter_check_health = aac_rkt_check_health;
 
+	/*
+	 *	First clear out all interrupts.  Then enable the one's that we
+	 *	can handle.
+	 */
+	rkt_writeb(dev, MUnit.OIMR, 0xff);
+	rkt_writel(dev, MUnit.ODR, 0xffffffff);
+	rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
+
 	if (aac_init_adapter(dev) == NULL)
 		goto error_irq;
 	/*
@@ -438,6 +457,7 @@ error_kfree:
 	kfree(dev->queues);
 
 error_irq:
+	rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff);
 	free_irq(dev->scsi_host_ptr->irq, (void *)dev);
 
 error_iounmap:
diff --git a/drivers/scsi/aacraid/rx.c b/drivers/scsi/aacraid/rx.c
index 1ff25f4..a8459fa 100644
--- a/drivers/scsi/aacraid/rx.c
+++ b/drivers/scsi/aacraid/rx.c
@@ -88,6 +88,16 @@ static irqreturn_t aac_rx_intr(int irq, void *dev_id, struct pt_regs *regs)
 }
 
 /**
+ *	aac_rx_disable_interrupt	-	Disable interrupts
+ *	@dev: Adapter
+ */
+
+static void aac_rx_disable_interrupt(struct aac_dev *dev)
+{
+	rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff);
+}
+
+/**
  *	rx_sync_cmd	-	send a command and wait
  *	@dev: Adapter
  *	@command: Command to execute
@@ -412,10 +422,19 @@ int aac_rx_init(struct aac_dev *dev)
 	 *	Fill in the function dispatch table.
 	 */
 	dev->a_ops.adapter_interrupt = aac_rx_interrupt_adapter;
+	dev->a_ops.adapter_disable_int = aac_rx_disable_interrupt;
 	dev->a_ops.adapter_notify = aac_rx_notify_adapter;
 	dev->a_ops.adapter_sync_cmd = rx_sync_cmd;
 	dev->a_ops.adapter_check_health = aac_rx_check_health;
 
+	/*
+	 *	First clear out all interrupts.  Then enable the one's that we
+	 *	can handle.
+	 */
+	rx_writeb(dev, MUnit.OIMR, 0xff);
+	rx_writel(dev, MUnit.ODR, 0xffffffff);
+	rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
+
 	if (aac_init_adapter(dev) == NULL)
 		goto error_irq;
 	/*
@@ -438,6 +457,7 @@ error_kfree:
 	kfree(dev->queues);
 
 error_irq:
+	rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff);
 	free_irq(dev->scsi_host_ptr->irq, (void *)dev);
 
 error_iounmap:
diff --git a/drivers/scsi/aacraid/sa.c b/drivers/scsi/aacraid/sa.c
index 0680249..3900abc 100644
--- a/drivers/scsi/aacraid/sa.c
+++ b/drivers/scsi/aacraid/sa.c
@@ -82,6 +82,16 @@ static irqreturn_t aac_sa_intr(int irq, void *dev_id, struct pt_regs *regs)
 }
 
 /**
+ *	aac_sa_disable_interrupt	-	disable interrupt
+ *	@dev: Which adapter to enable.
+ */
+
+static void aac_sa_disable_interrupt (struct aac_dev *dev)
+{
+	sa_writew(dev, SaDbCSR.PRISETIRQMASK, 0xffff);
+}
+
+/**
  *	aac_sa_notify_adapter		-	handle adapter notification
  *	@dev:	Adapter that notification is for
  *	@event:	Event to notidy
@@ -214,9 +224,8 @@ static int sa_sync_cmd(struct aac_dev *dev, u32 command,
  
 static void aac_sa_interrupt_adapter (struct aac_dev *dev)
 {
-	u32 ret;
 	sa_sync_cmd(dev, BREAKPOINT_REQUEST, 0, 0, 0, 0, 0, 0,
-			&ret, NULL, NULL, NULL, NULL);
+			NULL, NULL, NULL, NULL, NULL);
 }
 
 /**
@@ -352,10 +361,18 @@ int aac_sa_init(struct aac_dev *dev)
 	 */
 
 	dev->a_ops.adapter_interrupt = aac_sa_interrupt_adapter;
+	dev->a_ops.adapter_disable_int = aac_sa_disable_interrupt;
 	dev->a_ops.adapter_notify = aac_sa_notify_adapter;
 	dev->a_ops.adapter_sync_cmd = sa_sync_cmd;
 	dev->a_ops.adapter_check_health = aac_sa_check_health;
 
+	/*
+	 *	First clear out all interrupts.  Then enable the one's that 
+	 *	we can handle.
+	 */
+	sa_writew(dev, SaDbCSR.PRISETIRQMASK, 0xffff);
+	sa_writew(dev, SaDbCSR.PRICLEARIRQMASK, (PrintfReady | DOORBELL_1 | 
+				DOORBELL_2 | DOORBELL_3 | DOORBELL_4));
 
 	if(aac_init_adapter(dev) == NULL)
 		goto error_irq;
@@ -381,6 +398,7 @@ error_kfree:
 	kfree(dev->queues);
 
 error_irq:
+	sa_writew(dev, SaDbCSR.PRISETIRQMASK, 0xffff);
 	free_irq(dev->scsi_host_ptr->irq, (void *)dev);
 
 error_iounmap: