Merge remote-tracking branch 'common/android-3.0' into android-samsung-30-wip-mergedown

* common/android-3.0: (1178 commits)
  cpufreq: interactive: remove unused target_validate_time_in_idle
  cpufreq: interactive: Boost frequency on touchscreen input
  cpufreq: Separate speed target revalidate time and initial set time
  cpufreq: interactive: based hispeed bump on target freq, not actual
  cpufreq: interactive: adjust code and documentation to match
  cpufreq: interactive: configurable delay before raising above hispeed
  sync: add poll support
  sw_sync: add fill_driver_data support
  sync: add ioctl to get fence data
  sw_sync: add debug support
  sync: add debugfs support
  sync: add timestamps to sync_pts
  sw_sync: add cpu based sync driver
  sync: Add synchronization framework
  Linux 3.0.28
  Bluetooth: Fix l2cap conn failures for ssp devices
  TOMOYO: Fix mount flags checking order.
  iommu/amd: Make sure IOMMU interrupts are re-enabled on resume
  cred: copy_process() should clear child->replacement_session_keyring
  ASoC: ak4642: fixup: mute needs +1 step
  ...

Conflicts:
	mm/compaction.c

Change-Id: I3dc59225d2435eddbed0c639155179e580891ac8
Signed-off-by: JP Abgrall <jpa@google.com>

5 files changed, 15 insertions, 15 deletions

diff --git a/drivers/usb/gadget/f_loopback.c b/drivers/usb/gadget/f_loopback.c
index b37960f..0e64a47 100644
--- a/drivers/usb/gadget/f_loopback.c
+++ b/drivers/usb/gadget/f_loopback.c
@@ -373,7 +373,7 @@ int __init loopback_add(struct usb_composite_dev *cdev, bool autoresume)
 
 	/* support autoresume for remote wakeup testing */
 	if (autoresume)
-		sourcesink_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+		loopback_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 
 	/* support OTG systems */
 	if (gadget_is_otg(cdev->gadget)) {
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index 4e48331..5308381 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -767,7 +767,7 @@ out:
  * @is_last: return flag if it is the last dTD of the request
  * return: pointer to the built dTD */
 static struct ep_td_struct *fsl_build_dtd(struct fsl_req *req, unsigned *length,
-		dma_addr_t *dma, int *is_last)
+		dma_addr_t *dma, int *is_last, gfp_t gfp_flags)
 {
 	u32 swap_temp;
 	struct ep_td_struct *dtd;
@@ -776,7 +776,7 @@ static struct ep_td_struct *fsl_build_dtd(struct fsl_req *req, unsigned *length,
 	*length = min(req->req.length - req->req.actual,
 			(unsigned)EP_MAX_LENGTH_TRANSFER);
 
-	dtd = dma_pool_alloc(udc_controller->td_pool, GFP_KERNEL, dma);
+	dtd = dma_pool_alloc(udc_controller->td_pool, gfp_flags, dma);
 	if (dtd == NULL)
 		return dtd;
 
@@ -826,7 +826,7 @@ static struct ep_td_struct *fsl_build_dtd(struct fsl_req *req, unsigned *length,
 }
 
 /* Generate dtd chain for a request */
-static int fsl_req_to_dtd(struct fsl_req *req)
+static int fsl_req_to_dtd(struct fsl_req *req, gfp_t gfp_flags)
 {
 	unsigned	count;
 	int		is_last;
@@ -835,7 +835,7 @@ static int fsl_req_to_dtd(struct fsl_req *req)
 	dma_addr_t dma;
 
 	do {
-		dtd = fsl_build_dtd(req, &count, &dma, &is_last);
+		dtd = fsl_build_dtd(req, &count, &dma, &is_last, gfp_flags);
 		if (dtd == NULL)
 			return -ENOMEM;
 
@@ -909,13 +909,11 @@ fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 	req->req.actual = 0;
 	req->dtd_count = 0;
 
-	spin_lock_irqsave(&udc->lock, flags);
-
 	/* build dtds and push them to device queue */
-	if (!fsl_req_to_dtd(req)) {
+	if (!fsl_req_to_dtd(req, gfp_flags)) {
+		spin_lock_irqsave(&udc->lock, flags);
 		fsl_queue_td(ep, req);
 	} else {
-		spin_unlock_irqrestore(&udc->lock, flags);
 		return -ENOMEM;
 	}
 
@@ -1294,7 +1292,7 @@ static int ep0_prime_status(struct fsl_udc *udc, int direction)
 			ep_is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
 	req->mapped = 1;
 
-	if (fsl_req_to_dtd(req) == 0)
+	if (fsl_req_to_dtd(req, GFP_ATOMIC) == 0)
 		fsl_queue_td(ep, req);
 	else
 		return -ENOMEM;
@@ -1378,7 +1376,7 @@ static void ch9getstatus(struct fsl_udc *udc, u8 request_type, u16 value,
 	req->mapped = 1;
 
 	/* prime the data phase */
-	if ((fsl_req_to_dtd(req) == 0))
+	if ((fsl_req_to_dtd(req, GFP_ATOMIC) == 0))
 		fsl_queue_td(ep, req);
 	else			/* no mem */
 		goto stall;
diff --git a/drivers/usb/gadget/hid.c b/drivers/usb/gadget/hid.c
index 2523e54..79afa82 100644
--- a/drivers/usb/gadget/hid.c
+++ b/drivers/usb/gadget/hid.c
@@ -69,9 +69,9 @@ static struct usb_device_descriptor device_desc = {
 	/* .bDeviceClass =		USB_CLASS_COMM, */
 	/* .bDeviceSubClass =	0, */
 	/* .bDeviceProtocol =	0, */
-	.bDeviceClass =		0xEF,
-	.bDeviceSubClass =	2,
-	.bDeviceProtocol =	1,
+	.bDeviceClass =		USB_CLASS_PER_INTERFACE,
+	.bDeviceSubClass =	0,
+	.bDeviceProtocol =	0,
 	/* .bMaxPacketSize0 = f(hardware) */
 
 	/* Vendor and product id can be overridden by module parameters.  */
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index a56876a..febadaa 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -1050,6 +1050,8 @@ ep0_read (struct file *fd, char __user *buf, size_t len, loff_t *ptr)
 // FIXME don't call this with the spinlock held ...
 				if (copy_to_user (buf, dev->req->buf, len))
 					retval = -EFAULT;
+				else
+					retval = len;
 				clean_req (dev->gadget->ep0, dev->req);
 				/* NOTE userspace can't yet choose to stall */
 			}
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index 271ef94..88a464c 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -1602,7 +1602,7 @@ cleanup(void)
 	if (status)
 		ERROR(dev, "usb_gadget_unregister_driver %x\n", status);
 
-	unregister_chrdev_region(g_printer_devno, 2);
+	unregister_chrdev_region(g_printer_devno, 1);
 	class_destroy(usb_gadget_class);
 	mutex_unlock(&usb_printer_gadget.lock_printer_io);
 }