[PATCH] i810fb: Cleanup I2C code

- The functions for reading the 1st and 2nd bus are essentially the same,
  except for the register.  Consolidate them all.

- According to Nicolas Boichat, there is an undocumented 3rd i2c bus for
  attaching daughter cards.  Add support for this.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 47 insertions, 88 deletions

diff --git a/drivers/video/i810/i810-i2c.c b/drivers/video/i810/i810-i2c.c
index 689d258..c61bad0 100644
--- a/drivers/video/i810/i810-i2c.c
+++ b/drivers/video/i810/i810-i2c.c
@@ -46,92 +46,45 @@ static void i810i2c_setscl(void *data, int state)
         struct i810fb_par         *par = chan->par;
 	u8                        __iomem *mmio = par->mmio_start_virtual;
 
-	i810_writel(mmio, GPIOB, (state ? SCL_VAL_OUT : 0) | SCL_DIR |
+	i810_writel(mmio, chan->ddc_base, (state ? SCL_VAL_OUT : 0) | SCL_DIR |
 		    SCL_DIR_MASK | SCL_VAL_MASK);
-	i810_readl(mmio, GPIOB);	/* flush posted write */
+	i810_readl(mmio, chan->ddc_base);	/* flush posted write */
 }
 
 static void i810i2c_setsda(void *data, int state)
 {
-        struct i810fb_i2c_chan    *chan = (struct i810fb_i2c_chan *)data;
+        struct i810fb_i2c_chan    *chan = data;
         struct i810fb_par         *par = chan->par;
 	u8                        __iomem *mmio = par->mmio_start_virtual;
 
- 	i810_writel(mmio, GPIOB, (state ? SDA_VAL_OUT : 0) | SDA_DIR |
+ 	i810_writel(mmio, chan->ddc_base, (state ? SDA_VAL_OUT : 0) | SDA_DIR |
 		    SDA_DIR_MASK | SDA_VAL_MASK);
-	i810_readl(mmio, GPIOB);	/* flush posted write */
+	i810_readl(mmio, chan->ddc_base);	/* flush posted write */
 }
 
 static int i810i2c_getscl(void *data)
 {
-        struct i810fb_i2c_chan    *chan = (struct i810fb_i2c_chan *)data;
+        struct i810fb_i2c_chan    *chan = data;
         struct i810fb_par         *par = chan->par;
 	u8                        __iomem *mmio = par->mmio_start_virtual;
 
-	i810_writel(mmio, GPIOB, SCL_DIR_MASK);
-	i810_writel(mmio, GPIOB, 0);
-	return (0 != (i810_readl(mmio, GPIOB) & SCL_VAL_IN));
+	i810_writel(mmio, chan->ddc_base, SCL_DIR_MASK);
+	i810_writel(mmio, chan->ddc_base, 0);
+	return ((i810_readl(mmio, chan->ddc_base) & SCL_VAL_IN) != 0);
 }
 
 static int i810i2c_getsda(void *data)
 {
-        struct i810fb_i2c_chan    *chan = (struct i810fb_i2c_chan *)data;
+        struct i810fb_i2c_chan    *chan = data;
         struct i810fb_par         *par = chan->par;
 	u8                        __iomem *mmio = par->mmio_start_virtual;
 
-	i810_writel(mmio, GPIOB, SDA_DIR_MASK);
-	i810_writel(mmio, GPIOB, 0);
-	return (0 != (i810_readl(mmio, GPIOB) & SDA_VAL_IN));
-}
-
-static void i810ddc_setscl(void *data, int state)
-{
-        struct i810fb_i2c_chan    *chan = (struct i810fb_i2c_chan *)data;
-        struct i810fb_par       *par = chan->par;
-	u8                      __iomem *mmio = par->mmio_start_virtual;
-
-	i810_writel(mmio, GPIOA, (state ? SCL_VAL_OUT : 0) | SCL_DIR |
-		    SCL_DIR_MASK | SCL_VAL_MASK);
-	i810_readl(mmio, GPIOA);	/* flush posted write */
-}
-
-static void i810ddc_setsda(void *data, int state)
-{
-        struct i810fb_i2c_chan    *chan = (struct i810fb_i2c_chan *)data;
-        struct i810fb_par         *par = chan->par;
-	u8                      __iomem *mmio = par->mmio_start_virtual;
-
- 	i810_writel(mmio, GPIOA, (state ? SDA_VAL_OUT : 0) | SDA_DIR |
-		    SDA_DIR_MASK | SDA_VAL_MASK);
-	i810_readl(mmio, GPIOA);	/* flush posted write */
-}
-
-static int i810ddc_getscl(void *data)
-{
-        struct i810fb_i2c_chan    *chan = (struct i810fb_i2c_chan *)data;
-        struct i810fb_par         *par = chan->par;
-	u8                      __iomem *mmio = par->mmio_start_virtual;
-
-	i810_writel(mmio, GPIOA, SCL_DIR_MASK);
-	i810_writel(mmio, GPIOA, 0);
-	return (0 != (i810_readl(mmio, GPIOA) & SCL_VAL_IN));
-}
-
-static int i810ddc_getsda(void *data)
-{
-        struct i810fb_i2c_chan    *chan = (struct i810fb_i2c_chan *)data;
-        struct i810fb_par         *par = chan->par;
-	u8                      __iomem *mmio = par->mmio_start_virtual;
-
-	i810_writel(mmio, GPIOA, SDA_DIR_MASK);
-	i810_writel(mmio, GPIOA, 0);
-	return (0 != (i810_readl(mmio, GPIOA) & SDA_VAL_IN));
+	i810_writel(mmio, chan->ddc_base, SDA_DIR_MASK);
+	i810_writel(mmio, chan->ddc_base, 0);
+	return ((i810_readl(mmio, chan->ddc_base) & SDA_VAL_IN) != 0);
 }
 
-#define I2C_ALGO_DDC_I810   0x0e0000
-#define I2C_ALGO_I2C_I810   0x0f0000
-static int i810_setup_i2c_bus(struct i810fb_i2c_chan *chan, const char *name,
-			      int conn)
+static int i810_setup_i2c_bus(struct i810fb_i2c_chan *chan, const char *name)
 {
         int rc;
 
@@ -139,22 +92,11 @@ static int i810_setup_i2c_bus(struct i810fb_i2c_chan *chan, const char *name,
         chan->adapter.owner             = THIS_MODULE;
         chan->adapter.algo_data         = &chan->algo;
         chan->adapter.dev.parent        = &chan->par->dev->dev;
-	switch (conn) {
-	case 1:
-		chan->adapter.id                = I2C_ALGO_DDC_I810;
-		chan->algo.setsda               = i810ddc_setsda;
-		chan->algo.setscl               = i810ddc_setscl;
-		chan->algo.getsda               = i810ddc_getsda;
-		chan->algo.getscl               = i810ddc_getscl;
-		break;
-	case 2:
-		chan->adapter.id                = I2C_ALGO_I2C_I810;
-		chan->algo.setsda               = i810i2c_setsda;
-		chan->algo.setscl               = i810i2c_setscl;
-		chan->algo.getsda               = i810i2c_getsda;
-		chan->algo.getscl               = i810i2c_getscl;
-		break;
-	}
+	chan->adapter.id                = I2C_HW_B_I810;
+	chan->algo.setsda               = i810i2c_setsda;
+	chan->algo.setscl               = i810i2c_setscl;
+	chan->algo.getsda               = i810i2c_getsda;
+	chan->algo.getscl               = i810i2c_getscl;
 	chan->algo.udelay               = 10;
 	chan->algo.mdelay               = 10;
         chan->algo.timeout              = (HZ/2);
@@ -168,11 +110,15 @@ static int i810_setup_i2c_bus(struct i810fb_i2c_chan *chan, const char *name,
         udelay(20);
 
         rc = i2c_bit_add_bus(&chan->adapter);
+
         if (rc == 0)
                 dev_dbg(&chan->par->dev->dev, "I2C bus %s registered.\n",name);
-        else
+        else {
                 dev_warn(&chan->par->dev->dev, "Failed to register I2C bus "
 			 "%s.\n", name);
+		chan->par = NULL;
+	}
+
         return rc;
 }
 
@@ -180,8 +126,14 @@ void i810_create_i2c_busses(struct i810fb_par *par)
 {
         par->chan[0].par        = par;
 	par->chan[1].par        = par;
-	i810_setup_i2c_bus(&par->chan[0], "I810-DDC", 1);
-	i810_setup_i2c_bus(&par->chan[1], "I810-I2C", 2);
+	par->chan[2].par        = par;
+
+	par->chan[0].ddc_base = GPIOA;
+	i810_setup_i2c_bus(&par->chan[0], "I810-DDC");
+	par->chan[1].ddc_base = GPIOB;
+	i810_setup_i2c_bus(&par->chan[1], "I810-I2C");
+	par->chan[2].ddc_base = GPIOC;
+	i810_setup_i2c_bus(&par->chan[2], "I810-GPIOC");
 }
 
 void i810_delete_i2c_busses(struct i810fb_par *par)
@@ -189,9 +141,14 @@ void i810_delete_i2c_busses(struct i810fb_par *par)
         if (par->chan[0].par)
                 i2c_bit_del_bus(&par->chan[0].adapter);
         par->chan[0].par = NULL;
+
 	if (par->chan[1].par)
 		i2c_bit_del_bus(&par->chan[1].adapter);
 	par->chan[1].par = NULL;
+
+	if (par->chan[2].par)
+		i2c_bit_del_bus(&par->chan[2].adapter);
+	par->chan[2].par = NULL;
 }
 
 static u8 *i810_do_probe_i2c_edid(struct i810fb_i2c_chan *chan)
@@ -221,6 +178,7 @@ static u8 *i810_do_probe_i2c_edid(struct i810fb_i2c_chan *chan)
 		DPRINTK("i810-i2c: I2C Transfer successful\n");
                 return buf;
 	}
+
         DPRINTK("i810-i2c: Unable to read EDID block.\n");
         kfree(buf);
         return NULL;
@@ -233,7 +191,7 @@ int i810_probe_i2c_connector(struct fb_info *info, u8 **out_edid, int conn)
         int i;
 
 	DPRINTK("i810-i2c: Probe DDC%i Bus\n", conn);
-	if (conn < 3) {
+	if (conn < 4) {
 		for (i = 0; i < 3; i++) {
 			/* Do the real work */
 			edid = i810_do_probe_i2c_edid(&par->chan[conn-1]);
@@ -241,11 +199,14 @@ int i810_probe_i2c_connector(struct fb_info *info, u8 **out_edid, int conn)
 				break;
 		}
 	} else {
-		DPRINTK("i810-i2c: Getting EDID from BIOS\n");
-		edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
-		if (edid)
-			memcpy(edid, fb_firmware_edid(info->device),
-			       EDID_LENGTH);
+		const u8 *e = fb_firmware_edid(info->device);
+
+		if (e != NULL) {
+			DPRINTK("i810-i2c: Getting EDID from BIOS\n");
+			edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
+			if (edid)
+				memcpy(edid, e, EDID_LENGTH);
+		}
 	}
 
         if (out_edid)
@@ -253,5 +214,3 @@ int i810_probe_i2c_connector(struct fb_info *info, u8 **out_edid, int conn)
 
         return (edid) ? 0 : 1;
 }
-
-