mv watchdog tree under drivers

move watchdog tree from drivers/char/watchdog to drivers/watchdog.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

1 files changed, 563 insertions, 0 deletions

diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
new file mode 100644
index 0000000..5d1c15f
--- /dev/null
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -0,0 +1,563 @@
+/* linux/drivers/char/watchdog/s3c2410_wdt.c
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 Watchdog Timer Support
+ *
+ * Based on, softdog.c by Alan Cox,
+ *     (c) Copyright 1996 Alan Cox <alan@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * Changelog:
+ *	05-Oct-2004	BJD	Added semaphore init to stop crashes on open
+ *				Fixed tmr_count / wdt_count confusion
+ *				Added configurable debug
+ *
+ *	11-Jan-2005	BJD	Fixed divide-by-2 in timeout code
+ *
+ *	25-Jan-2005	DA	Added suspend/resume support
+ *				Replaced reboot notifier with .shutdown method
+ *
+ *	10-Mar-2005	LCVR	Changed S3C2410_VA to S3C24XX_VA
+*/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/timer.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+
+#include <asm/uaccess.h>
+#include <asm/io.h>
+
+#include <asm/arch/map.h>
+
+#undef S3C_VA_WATCHDOG
+#define S3C_VA_WATCHDOG (0)
+
+#include <asm/plat-s3c/regs-watchdog.h>
+
+#define PFX "s3c2410-wdt: "
+
+#define CONFIG_S3C2410_WATCHDOG_ATBOOT		(0)
+#define CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME	(15)
+
+static int nowayout	= WATCHDOG_NOWAYOUT;
+static int tmr_margin	= CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME;
+static int tmr_atboot	= CONFIG_S3C2410_WATCHDOG_ATBOOT;
+static int soft_noboot	= 0;
+static int debug	= 0;
+
+module_param(tmr_margin,  int, 0);
+module_param(tmr_atboot,  int, 0);
+module_param(nowayout,    int, 0);
+module_param(soft_noboot, int, 0);
+module_param(debug,	  int, 0);
+
+MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. default=" __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME) ")");
+
+MODULE_PARM_DESC(tmr_atboot, "Watchdog is started at boot time if set to 1, default=" __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_ATBOOT));
+
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, 0 to reboot (default depends on ONLY_TESTING)");
+
+MODULE_PARM_DESC(debug, "Watchdog debug, set to >1 for debug, (default 0)");
+
+
+typedef enum close_state {
+	CLOSE_STATE_NOT,
+	CLOSE_STATE_ALLOW=0x4021
+} close_state_t;
+
+static DECLARE_MUTEX(open_lock);
+
+static struct device    *wdt_dev;	/* platform device attached to */
+static struct resource	*wdt_mem;
+static struct resource	*wdt_irq;
+static struct clk	*wdt_clock;
+static void __iomem	*wdt_base;
+static unsigned int	 wdt_count;
+static close_state_t	 allow_close;
+
+/* watchdog control routines */
+
+#define DBG(msg...) do { \
+	if (debug) \
+		printk(KERN_INFO msg); \
+	} while(0)
+
+/* functions */
+
+static int s3c2410wdt_keepalive(void)
+{
+	writel(wdt_count, wdt_base + S3C2410_WTCNT);
+	return 0;
+}
+
+static int s3c2410wdt_stop(void)
+{
+	unsigned long wtcon;
+
+	wtcon = readl(wdt_base + S3C2410_WTCON);
+	wtcon &= ~(S3C2410_WTCON_ENABLE | S3C2410_WTCON_RSTEN);
+	writel(wtcon, wdt_base + S3C2410_WTCON);
+
+	return 0;
+}
+
+static int s3c2410wdt_start(void)
+{
+	unsigned long wtcon;
+
+	s3c2410wdt_stop();
+
+	wtcon = readl(wdt_base + S3C2410_WTCON);
+	wtcon |= S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128;
+
+	if (soft_noboot) {
+		wtcon |= S3C2410_WTCON_INTEN;
+		wtcon &= ~S3C2410_WTCON_RSTEN;
+	} else {
+		wtcon &= ~S3C2410_WTCON_INTEN;
+		wtcon |= S3C2410_WTCON_RSTEN;
+	}
+
+	DBG("%s: wdt_count=0x%08x, wtcon=%08lx\n",
+	    __FUNCTION__, wdt_count, wtcon);
+
+	writel(wdt_count, wdt_base + S3C2410_WTDAT);
+	writel(wdt_count, wdt_base + S3C2410_WTCNT);
+	writel(wtcon, wdt_base + S3C2410_WTCON);
+
+	return 0;
+}
+
+static int s3c2410wdt_set_heartbeat(int timeout)
+{
+	unsigned int freq = clk_get_rate(wdt_clock);
+	unsigned int count;
+	unsigned int divisor = 1;
+	unsigned long wtcon;
+
+	if (timeout < 1)
+		return -EINVAL;
+
+	freq /= 128;
+	count = timeout * freq;
+
+	DBG("%s: count=%d, timeout=%d, freq=%d\n",
+	    __FUNCTION__, count, timeout, freq);
+
+	/* if the count is bigger than the watchdog register,
+	   then work out what we need to do (and if) we can
+	   actually make this value
+	*/
+
+	if (count >= 0x10000) {
+		for (divisor = 1; divisor <= 0x100; divisor++) {
+			if ((count / divisor) < 0x10000)
+				break;
+		}
+
+		if ((count / divisor) >= 0x10000) {
+			dev_err(wdt_dev, "timeout %d too big\n", timeout);
+			return -EINVAL;
+		}
+	}
+
+	tmr_margin = timeout;
+
+	DBG("%s: timeout=%d, divisor=%d, count=%d (%08x)\n",
+	    __FUNCTION__, timeout, divisor, count, count/divisor);
+
+	count /= divisor;
+	wdt_count = count;
+
+	/* update the pre-scaler */
+	wtcon = readl(wdt_base + S3C2410_WTCON);
+	wtcon &= ~S3C2410_WTCON_PRESCALE_MASK;
+	wtcon |= S3C2410_WTCON_PRESCALE(divisor-1);
+
+	writel(count, wdt_base + S3C2410_WTDAT);
+	writel(wtcon, wdt_base + S3C2410_WTCON);
+
+	return 0;
+}
+
+/*
+ *	/dev/watchdog handling
+ */
+
+static int s3c2410wdt_open(struct inode *inode, struct file *file)
+{
+	if(down_trylock(&open_lock))
+		return -EBUSY;
+
+	if (nowayout)
+		__module_get(THIS_MODULE);
+
+	allow_close = CLOSE_STATE_NOT;
+
+	/* start the timer */
+	s3c2410wdt_start();
+	return nonseekable_open(inode, file);
+}
+
+static int s3c2410wdt_release(struct inode *inode, struct file *file)
+{
+	/*
+	 *	Shut off the timer.
+	 * 	Lock it in if it's a module and we set nowayout
+	 */
+
+	if (allow_close == CLOSE_STATE_ALLOW) {
+		s3c2410wdt_stop();
+	} else {
+		dev_err(wdt_dev, "Unexpected close, not stopping watchdog\n");
+		s3c2410wdt_keepalive();
+	}
+
+	allow_close = CLOSE_STATE_NOT;
+	up(&open_lock);
+	return 0;
+}
+
+static ssize_t s3c2410wdt_write(struct file *file, const char __user *data,
+				size_t len, loff_t *ppos)
+{
+	/*
+	 *	Refresh the timer.
+	 */
+	if(len) {
+		if (!nowayout) {
+			size_t i;
+
+			/* In case it was set long ago */
+			allow_close = CLOSE_STATE_NOT;
+
+			for (i = 0; i != len; i++) {
+				char c;
+
+				if (get_user(c, data + i))
+					return -EFAULT;
+				if (c == 'V')
+					allow_close = CLOSE_STATE_ALLOW;
+			}
+		}
+
+		s3c2410wdt_keepalive();
+	}
+	return len;
+}
+
+#define OPTIONS WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE
+
+static struct watchdog_info s3c2410_wdt_ident = {
+	.options          =     OPTIONS,
+	.firmware_version =	0,
+	.identity         =	"S3C2410 Watchdog",
+};
+
+
+static int s3c2410wdt_ioctl(struct inode *inode, struct file *file,
+	unsigned int cmd, unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	int new_margin;
+
+	switch (cmd) {
+		default:
+			return -ENOTTY;
+
+		case WDIOC_GETSUPPORT:
+			return copy_to_user(argp, &s3c2410_wdt_ident,
+				sizeof(s3c2410_wdt_ident)) ? -EFAULT : 0;
+
+		case WDIOC_GETSTATUS:
+		case WDIOC_GETBOOTSTATUS:
+			return put_user(0, p);
+
+		case WDIOC_KEEPALIVE:
+			s3c2410wdt_keepalive();
+			return 0;
+
+		case WDIOC_SETTIMEOUT:
+			if (get_user(new_margin, p))
+				return -EFAULT;
+
+			if (s3c2410wdt_set_heartbeat(new_margin))
+				return -EINVAL;
+
+			s3c2410wdt_keepalive();
+			return put_user(tmr_margin, p);
+
+		case WDIOC_GETTIMEOUT:
+			return put_user(tmr_margin, p);
+	}
+}
+
+/* kernel interface */
+
+static const struct file_operations s3c2410wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= s3c2410wdt_write,
+	.ioctl		= s3c2410wdt_ioctl,
+	.open		= s3c2410wdt_open,
+	.release	= s3c2410wdt_release,
+};
+
+static struct miscdevice s3c2410wdt_miscdev = {
+	.minor		= WATCHDOG_MINOR,
+	.name		= "watchdog",
+	.fops		= &s3c2410wdt_fops,
+};
+
+/* interrupt handler code */
+
+static irqreturn_t s3c2410wdt_irq(int irqno, void *param)
+{
+	dev_info(wdt_dev, "watchdog timer expired (irq)\n");
+
+	s3c2410wdt_keepalive();
+	return IRQ_HANDLED;
+}
+/* device interface */
+
+static int s3c2410wdt_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct device *dev;
+	unsigned int wtcon;
+	int started = 0;
+	int ret;
+	int size;
+
+	DBG("%s: probe=%p\n", __FUNCTION__, pdev);
+
+	dev = &pdev->dev;
+	wdt_dev = &pdev->dev;
+
+	/* get the memory region for the watchdog timer */
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(dev, "no memory resource specified\n");
+		return -ENOENT;
+	}
+
+	size = (res->end-res->start)+1;
+	wdt_mem = request_mem_region(res->start, size, pdev->name);
+	if (wdt_mem == NULL) {
+		dev_err(dev, "failed to get memory region\n");
+		ret = -ENOENT;
+		goto err_req;
+	}
+
+	wdt_base = ioremap(res->start, size);
+	if (wdt_base == 0) {
+		dev_err(dev, "failed to ioremap() region\n");
+		ret = -EINVAL;
+		goto err_req;
+	}
+
+	DBG("probe: mapped wdt_base=%p\n", wdt_base);
+
+	wdt_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (wdt_irq == NULL) {
+		dev_err(dev, "no irq resource specified\n");
+		ret = -ENOENT;
+		goto err_map;
+	}
+
+	ret = request_irq(wdt_irq->start, s3c2410wdt_irq, 0, pdev->name, pdev);
+	if (ret != 0) {
+		dev_err(dev, "failed to install irq (%d)\n", ret);
+		goto err_map;
+	}
+
+	wdt_clock = clk_get(&pdev->dev, "watchdog");
+	if (IS_ERR(wdt_clock)) {
+		dev_err(dev, "failed to find watchdog clock source\n");
+		ret = PTR_ERR(wdt_clock);
+		goto err_irq;
+	}
+
+	clk_enable(wdt_clock);
+
+	/* see if we can actually set the requested timer margin, and if
+	 * not, try the default value */
+
+	if (s3c2410wdt_set_heartbeat(tmr_margin)) {
+		started = s3c2410wdt_set_heartbeat(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME);
+
+		if (started == 0) {
+			dev_info(dev,"tmr_margin value out of range, default %d used\n",
+			       CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME);
+		} else {
+			dev_info(dev, "default timer value is out of range, cannot start\n");
+		}
+	}
+
+	ret = misc_register(&s3c2410wdt_miscdev);
+	if (ret) {
+		dev_err(dev, "cannot register miscdev on minor=%d (%d)\n",
+			WATCHDOG_MINOR, ret);
+		goto err_clk;
+	}
+
+	if (tmr_atboot && started == 0) {
+		dev_info(dev, "starting watchdog timer\n");
+		s3c2410wdt_start();
+	} else if (!tmr_atboot) {
+		/* if we're not enabling the watchdog, then ensure it is
+		 * disabled if it has been left running from the bootloader
+		 * or other source */
+
+		s3c2410wdt_stop();
+	}
+
+	/* print out a statement of readiness */
+
+	wtcon = readl(wdt_base + S3C2410_WTCON);
+
+	dev_info(dev, "watchdog %sactive, reset %sabled, irq %sabled\n",
+		 (wtcon & S3C2410_WTCON_ENABLE) ?  "" : "in",
+		 (wtcon & S3C2410_WTCON_RSTEN) ? "" : "dis",
+		 (wtcon & S3C2410_WTCON_INTEN) ? "" : "en");
+	
+	return 0;
+
+ err_clk:
+	clk_disable(wdt_clock);
+	clk_put(wdt_clock);
+
+ err_irq:
+	free_irq(wdt_irq->start, pdev);
+
+ err_map:
+	iounmap(wdt_base);
+
+ err_req:
+	release_resource(wdt_mem);
+	kfree(wdt_mem);
+
+	return ret;
+}
+
+static int s3c2410wdt_remove(struct platform_device *dev)
+{
+	release_resource(wdt_mem);
+	kfree(wdt_mem);
+	wdt_mem = NULL;
+
+	free_irq(wdt_irq->start, dev);
+	wdt_irq = NULL;
+
+	clk_disable(wdt_clock);
+	clk_put(wdt_clock);
+	wdt_clock = NULL;
+
+	iounmap(wdt_base);
+	misc_deregister(&s3c2410wdt_miscdev);
+	return 0;
+}
+
+static void s3c2410wdt_shutdown(struct platform_device *dev)
+{
+	s3c2410wdt_stop();	
+}
+
+#ifdef CONFIG_PM
+
+static unsigned long wtcon_save;
+static unsigned long wtdat_save;
+
+static int s3c2410wdt_suspend(struct platform_device *dev, pm_message_t state)
+{
+	/* Save watchdog state, and turn it off. */
+	wtcon_save = readl(wdt_base + S3C2410_WTCON);
+	wtdat_save = readl(wdt_base + S3C2410_WTDAT);
+
+	/* Note that WTCNT doesn't need to be saved. */
+	s3c2410wdt_stop();
+
+	return 0;
+}
+
+static int s3c2410wdt_resume(struct platform_device *dev)
+{
+	/* Restore watchdog state. */
+
+	writel(wtdat_save, wdt_base + S3C2410_WTDAT);
+	writel(wtdat_save, wdt_base + S3C2410_WTCNT); /* Reset count */
+	writel(wtcon_save, wdt_base + S3C2410_WTCON);
+
+	printk(KERN_INFO PFX "watchdog %sabled\n",
+	       (wtcon_save & S3C2410_WTCON_ENABLE) ? "en" : "dis");
+
+	return 0;
+}
+
+#else
+#define s3c2410wdt_suspend NULL
+#define s3c2410wdt_resume  NULL
+#endif /* CONFIG_PM */
+
+
+static struct platform_driver s3c2410wdt_driver = {
+	.probe		= s3c2410wdt_probe,
+	.remove		= s3c2410wdt_remove,
+	.shutdown	= s3c2410wdt_shutdown,
+	.suspend	= s3c2410wdt_suspend,
+	.resume		= s3c2410wdt_resume,
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= "s3c2410-wdt",
+	},
+};
+
+
+static char banner[] __initdata = KERN_INFO "S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics\n";
+
+static int __init watchdog_init(void)
+{
+	printk(banner);
+	return platform_driver_register(&s3c2410wdt_driver);
+}
+
+static void __exit watchdog_exit(void)
+{
+	platform_driver_unregister(&s3c2410wdt_driver);
+}
+
+module_init(watchdog_init);
+module_exit(watchdog_exit);
+
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>, "
+	      "Dimitry Andric <dimitry.andric@tomtom.com>");
+MODULE_DESCRIPTION("S3C2410 Watchdog Device Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);