[PATCH] m32r: Support M3A-2170(Mappi-III) platform

This patchset is for supporting a new m32r platform, M3A-2170(Mappi-III)
evaluation board.  An M32R chip multiprocessor is equipped on the board.
http://http://www.linux-m32r.org/eng/platform/platform.html

	* arch/m32r/Kconfig: Support Mappi-III platform.
	* arch/m32r/kernel/Makefile: ditto.
	* arch/m32r/kernel/io_mappi3.c: ditto.
	* arch/m32r/kernel/setup.c: ditto.
	* arch/m32r/kernel/setup_mappi3.c: ditto.
	* include/asm-m32r/m32102.h: ditto.
	* include/asm-m32r/m32r.h: ditto.
	* include/asm-m32r/mappi3/mappi3_pld.h: ditto.

	* include/asm-m32r/ide.h: CF support for Mappi-III.
	* arch/m32r/kernel/setup_mappi3.c: ditto.

	* arch/m32r/mappi3/defconfig.smp: A default config file for Mappi-III.
	* arch/m32r/mappi3/dot.gdbinit: A default .gdbinit file for Mappi-III.

	* arch/m32r/boot/compressed/m32r_sio.c: Modified for Mappi-III
	  - At boot time, m32r-g00ff bootloader makes MMU off for Mappi-III,
	    on the contrary it makes MMU on for Mappi-II.

	* arch/m32r/kernel/io_mappi2.c: Update comments.
	* arch/m32r/kernel/setup_mappi2.c: ditto.

Signed-off-by: Mamoru Sakugawa <sakugawa@linux-m32r.org>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 143 insertions, 0 deletions

diff --git a/include/asm-m32r/mappi3/mappi3_pld.h b/include/asm-m32r/mappi3/mappi3_pld.h
new file mode 100644
index 0000000..3f1551f
--- /dev/null
+++ b/include/asm-m32r/mappi3/mappi3_pld.h
@@ -0,0 +1,143 @@
+/*
+ * include/asm/mappi3/mappi3_pld.h
+ *
+ * Definitions for Extended IO Logic on MAPPI3 board.
+ *  based on m32700ut_pld.h
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file "COPYING" in the main directory of
+ * this archive for more details.
+ *
+ */
+
+#ifndef _MAPPI3_PLD_H
+#define _MAPPI3_PLD_H
+
+#ifndef __ASSEMBLY__
+/* FIXME:
+ * Some C functions use non-cache address, so can't define non-cache address.
+ */
+#define PLD_BASE		(0x1c000000 /* + NONCACHE_OFFSET */)
+#define __reg8			(volatile unsigned char *)
+#define __reg16			(volatile unsigned short *)
+#define __reg32			(volatile unsigned int *)
+#else
+#define PLD_BASE		(0x1c000000 + NONCACHE_OFFSET)
+#define __reg8
+#define __reg16
+#define __reg32
+#endif	/* __ASSEMBLY__ */
+
+/* CFC */
+#define	PLD_CFRSTCR		__reg16(PLD_BASE + 0x0000)
+#define PLD_CFSTS		__reg16(PLD_BASE + 0x0002)
+#define PLD_CFIMASK		__reg16(PLD_BASE + 0x0004)
+#define PLD_CFBUFCR		__reg16(PLD_BASE + 0x0006)
+#define PLD_CFCR0		__reg16(PLD_BASE + 0x000a)
+#define PLD_CFCR1		__reg16(PLD_BASE + 0x000c)
+
+/* MMC */
+#define PLD_MMCCR		__reg16(PLD_BASE + 0x4000)
+#define PLD_MMCMOD		__reg16(PLD_BASE + 0x4002)
+#define PLD_MMCSTS		__reg16(PLD_BASE + 0x4006)
+#define PLD_MMCBAUR		__reg16(PLD_BASE + 0x400a)
+#define PLD_MMCCMDBCUT		__reg16(PLD_BASE + 0x400c)
+#define PLD_MMCCDTBCUT		__reg16(PLD_BASE + 0x400e)
+#define PLD_MMCDET		__reg16(PLD_BASE + 0x4010)
+#define PLD_MMCWP		__reg16(PLD_BASE + 0x4012)
+#define PLD_MMCWDATA		__reg16(PLD_BASE + 0x5000)
+#define PLD_MMCRDATA		__reg16(PLD_BASE + 0x6000)
+#define PLD_MMCCMDDATA		__reg16(PLD_BASE + 0x7000)
+#define PLD_MMCRSPDATA		__reg16(PLD_BASE + 0x7006)
+
+/* Power Control of MMC and CF */
+#define PLD_CPCR		__reg16(PLD_BASE + 0x14000)
+
+
+/*==== ICU ====*/
+#define  M32R_IRQ_PC104        (5)   /* INT4(PC/104) */
+#define  M32R_IRQ_I2C          (28)  /* I2C-BUS     */
+#define  PLD_IRQ_CFIREQ       (6)  /* INT5 CFC Card Interrupt */
+#define  PLD_IRQ_CFC_INSERT   (7)  /* INT6 CFC Card Insert */
+#define  PLD_IRQ_CFC_EJECT    (8)  /* INT7 CFC Card Eject */
+#define  PLD_IRQ_MMCCARD      (43)  /* MMC Card Insert */
+#define  PLD_IRQ_MMCIRQ       (44)  /* MMC Transfer Done */
+
+
+#if 0
+/* LED Control
+ *
+ * 1: DIP swich side
+ * 2: Reset switch side
+ */
+#define PLD_IOLEDCR		__reg16(PLD_BASE + 0x14002)
+#define PLD_IOLED_1_ON		0x001
+#define PLD_IOLED_1_OFF		0x000
+#define PLD_IOLED_2_ON		0x002
+#define PLD_IOLED_2_OFF		0x000
+
+/* DIP Switch
+ *  0: Write-protect of Flash Memory (0:protected, 1:non-protected)
+ *  1: -
+ *  2: -
+ *  3: -
+ */
+#define PLD_IOSWSTS		__reg16(PLD_BASE + 0x14004)
+#define	PLD_IOSWSTS_IOSW2	0x0200
+#define	PLD_IOSWSTS_IOSW1	0x0100
+#define	PLD_IOSWSTS_IOWP0	0x0001
+
+#endif
+
+/* CRC */
+#define PLD_CRC7DATA		__reg16(PLD_BASE + 0x18000)
+#define PLD_CRC7INDATA		__reg16(PLD_BASE + 0x18002)
+#define PLD_CRC16DATA		__reg16(PLD_BASE + 0x18004)
+#define PLD_CRC16INDATA		__reg16(PLD_BASE + 0x18006)
+#define PLD_CRC16ADATA		__reg16(PLD_BASE + 0x18008)
+#define PLD_CRC16AINDATA	__reg16(PLD_BASE + 0x1800a)
+
+
+#if 0
+/* RTC */
+#define PLD_RTCCR		__reg16(PLD_BASE + 0x1c000)
+#define PLD_RTCBAUR		__reg16(PLD_BASE + 0x1c002)
+#define PLD_RTCWRDATA		__reg16(PLD_BASE + 0x1c004)
+#define PLD_RTCRDDATA		__reg16(PLD_BASE + 0x1c006)
+#define PLD_RTCRSTODT		__reg16(PLD_BASE + 0x1c008)
+
+/* SIO0 */
+#define PLD_ESIO0CR		__reg16(PLD_BASE + 0x20000)
+#define	PLD_ESIO0CR_TXEN	0x0001
+#define	PLD_ESIO0CR_RXEN	0x0002
+#define PLD_ESIO0MOD0		__reg16(PLD_BASE + 0x20002)
+#define	PLD_ESIO0MOD0_CTSS	0x0040
+#define	PLD_ESIO0MOD0_RTSS	0x0080
+#define PLD_ESIO0MOD1		__reg16(PLD_BASE + 0x20004)
+#define	PLD_ESIO0MOD1_LMFS	0x0010
+#define PLD_ESIO0STS		__reg16(PLD_BASE + 0x20006)
+#define	PLD_ESIO0STS_TEMP	0x0001
+#define	PLD_ESIO0STS_TXCP	0x0002
+#define	PLD_ESIO0STS_RXCP	0x0004
+#define	PLD_ESIO0STS_TXSC	0x0100
+#define	PLD_ESIO0STS_RXSC	0x0200
+#define PLD_ESIO0STS_TXREADY	(PLD_ESIO0STS_TXCP | PLD_ESIO0STS_TEMP)
+#define PLD_ESIO0INTCR		__reg16(PLD_BASE + 0x20008)
+#define	PLD_ESIO0INTCR_TXIEN	0x0002
+#define	PLD_ESIO0INTCR_RXCEN	0x0004
+#define PLD_ESIO0BAUR		__reg16(PLD_BASE + 0x2000a)
+#define PLD_ESIO0TXB		__reg16(PLD_BASE + 0x2000c)
+#define PLD_ESIO0RXB		__reg16(PLD_BASE + 0x2000e)
+
+/* SIM Card */
+#define PLD_SCCR		__reg16(PLD_BASE + 0x38000)
+#define PLD_SCMOD		__reg16(PLD_BASE + 0x38004)
+#define PLD_SCSTS		__reg16(PLD_BASE + 0x38006)
+#define PLD_SCINTCR		__reg16(PLD_BASE + 0x38008)
+#define PLD_SCBAUR		__reg16(PLD_BASE + 0x3800a)
+#define PLD_SCTXB		__reg16(PLD_BASE + 0x3800c)
+#define PLD_SCRXB		__reg16(PLD_BASE + 0x3800e)
+
+#endif
+
+#endif	/* _MAPPI3_PLD.H */