aboutsummaryrefslogtreecommitdiffstats
path: root/sound/isa/wss
diff options
context:
space:
mode:
authorKrzysztof Helt <krzysztof.h1@wp.pl>2009-01-09 23:10:52 +0100
committerTakashi Iwai <tiwai@suse.de>2009-01-11 13:09:05 +0100
commit199f7978730a4bbd88038fd84212b30759579f1a (patch)
treeee3deea40e2db5a38967fce16cb55a3b6103d154 /sound/isa/wss
parentc59765042f53a79a7a65585042ff463b69cb248c (diff)
downloadkernel_samsung_aries-199f7978730a4bbd88038fd84212b30759579f1a.zip
kernel_samsung_aries-199f7978730a4bbd88038fd84212b30759579f1a.tar.gz
kernel_samsung_aries-199f7978730a4bbd88038fd84212b30759579f1a.tar.bz2
ALSA: wss-lib: move AD1845 frequency setting into wss-lib
This is required to allow the sscape driver to autodetect installed codec. Also, do not create a timer if detected codec has no hardware timer (e.g. AD1848). Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Rene Herman Signed-off-by: Takashi Iwai <tiwai@suse.de>
Diffstat (limited to 'sound/isa/wss')
-rw-r--r--sound/isa/wss/wss_lib.c40
1 files changed, 40 insertions, 0 deletions
diff --git a/sound/isa/wss/wss_lib.c b/sound/isa/wss/wss_lib.c
index 3d6c5f2..13299ae 100644
--- a/sound/isa/wss/wss_lib.c
+++ b/sound/isa/wss/wss_lib.c
@@ -646,6 +646,24 @@ static void snd_wss_playback_format(struct snd_wss *chip,
full_calib = 0;
}
spin_unlock_irqrestore(&chip->reg_lock, flags);
+ } else if (chip->hardware == WSS_HW_AD1845) {
+ unsigned rate = params_rate(params);
+
+ /*
+ * Program the AD1845 correctly for the playback stream.
+ * Note that we do NOT need to toggle the MCE bit because
+ * the PLAYBACK_ENABLE bit of the Interface Configuration
+ * register is set.
+ *
+ * NOTE: We seem to need to write to the MSB before the LSB
+ * to get the correct sample frequency.
+ */
+ spin_lock_irqsave(&chip->reg_lock, flags);
+ snd_wss_out(chip, CS4231_PLAYBK_FORMAT, (pdfr & 0xf0));
+ snd_wss_out(chip, AD1845_UPR_FREQ_SEL, (rate >> 8) & 0xff);
+ snd_wss_out(chip, AD1845_LWR_FREQ_SEL, rate & 0xff);
+ full_calib = 0;
+ spin_unlock_irqrestore(&chip->reg_lock, flags);
}
if (full_calib) {
snd_wss_mce_up(chip);
@@ -690,6 +708,24 @@ static void snd_wss_capture_format(struct snd_wss *chip,
full_calib = 0;
}
spin_unlock_irqrestore(&chip->reg_lock, flags);
+ } else if (chip->hardware == WSS_HW_AD1845) {
+ unsigned rate = params_rate(params);
+
+ /*
+ * Program the AD1845 correctly for the capture stream.
+ * Note that we do NOT need to toggle the MCE bit because
+ * the PLAYBACK_ENABLE bit of the Interface Configuration
+ * register is set.
+ *
+ * NOTE: We seem to need to write to the MSB before the LSB
+ * to get the correct sample frequency.
+ */
+ spin_lock_irqsave(&chip->reg_lock, flags);
+ snd_wss_out(chip, CS4231_REC_FORMAT, (cdfr & 0xf0));
+ snd_wss_out(chip, AD1845_UPR_FREQ_SEL, (rate >> 8) & 0xff);
+ snd_wss_out(chip, AD1845_LWR_FREQ_SEL, rate & 0xff);
+ full_calib = 0;
+ spin_unlock_irqrestore(&chip->reg_lock, flags);
}
if (full_calib) {
snd_wss_mce_up(chip);
@@ -1314,6 +1350,10 @@ static int snd_wss_probe(struct snd_wss *chip)
chip->image[CS4231_ALT_FEATURE_2] =
chip->hardware == WSS_HW_INTERWAVE ? 0xc2 : 0x01;
}
+ /* enable fine grained frequency selection */
+ if (chip->hardware == WSS_HW_AD1845)
+ chip->image[AD1845_PWR_DOWN] = 8;
+
ptr = (unsigned char *) &chip->image;
regnum = (chip->hardware & WSS_HW_AD1848_MASK) ? 16 : 32;
snd_wss_mce_down(chip);