diff options
80 files changed, 4495 insertions, 482 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index debde01..1e6b6bd 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4448,7 +4448,7 @@ L: platform-driver-x86@vger.kernel.org S: Maintained F: drivers/platform/x86/panasonic-laptop.c -PANASONIC MN10300/AM33 PORT +PANASONIC MN10300/AM33/AM34 PORT M: David Howells <dhowells@redhat.com> M: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> L: linux-am33-list@redhat.com (moderated for non-subscribers) diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig index a0a16e6..81e2781 100644 --- a/arch/mn10300/Kconfig +++ b/arch/mn10300/Kconfig @@ -48,7 +48,7 @@ config GENERIC_CALIBRATE_DELAY def_bool y config GENERIC_CMOS_UPDATE - def_bool y + def_bool n config GENERIC_FIND_NEXT_BIT def_bool y @@ -72,10 +72,6 @@ config GENERIC_HARDIRQS config HOTPLUG_CPU def_bool n -config HZ - int - default 1000 - mainmenu "Matsushita MN10300/AM33 Kernel Configuration" source "init/Kconfig" @@ -98,6 +94,9 @@ config MN10300_UNIT_ASB2303 config MN10300_UNIT_ASB2305 bool "ASB2305" +config MN10300_UNIT_ASB2364 + bool "ASB2364" + endchoice choice @@ -115,17 +114,13 @@ config MN10300_PROC_MN103E010 select MN10300_PROC_HAS_TTYSM1 select MN10300_PROC_HAS_TTYSM2 -endchoice - -choice - prompt "Processor core support" - default MN10300_CPU_AM33V2 - help - This option specifies the processor core for which the kernel will be - compiled. It affects the instruction set used. - -config MN10300_CPU_AM33V2 - bool "AM33v2" +config MN10300_PROC_MN2WS0050 + bool "MN2WS0050" + depends on MN10300_UNIT_ASB2364 + select AM34_2 + select MN10300_PROC_HAS_TTYSM0 + select MN10300_PROC_HAS_TTYSM1 + select MN10300_PROC_HAS_TTYSM2 endchoice @@ -138,7 +133,7 @@ config MN10300_HAS_ATOMIC_OPS_UNIT config FPU bool "FPU present" default y - depends on MN10300_PROC_MN103E010 + depends on MN10300_PROC_MN103E010 || MN10300_PROC_MN2WS0050 config LAZY_SAVE_FPU bool "Save FPU state lazily" @@ -179,24 +174,55 @@ config KERNEL_TEXT_ADDRESS config KERNEL_ZIMAGE_BASE_ADDRESS hex "Base address of compressed vmlinux image" - default "0x90700000" + default "0x50700000" + +config BOOT_STACK_OFFSET + hex + default "0xF00" if SMP + default "0xFF0" if !SMP +config BOOT_STACK_SIZE + hex + depends on SMP + default "0x100" endmenu -config PREEMPT - bool "Preemptible Kernel" - help - This option reduces the latency of the kernel when reacting to - real-time or interactive events by allowing a low priority process to - be preempted even if it is in kernel mode executing a system call. - This allows applications to run more reliably even when the system is - under load. +config SMP + bool "Symmetric multi-processing support" + default y + depends on MN10300_PROC_MN2WS0038 || MN10300_PROC_MN2WS0050 + ---help--- + This enables support for systems with more than one CPU. If you have + a system with only one CPU, like most personal computers, say N. If + you have a system with more than one CPU, say Y. + + If you say N here, the kernel will run on single and multiprocessor + machines, but will use only one CPU of a multiprocessor machine. If + you say Y here, the kernel will run on many, but not all, + singleprocessor machines. On a singleprocessor machine, the kernel + will run faster if you say N here. + + See also <file:Documentation/i386/IO-APIC.txt>, + <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at + <http://www.tldp.org/docs.html#howto>. - Say Y here if you are building a kernel for a desktop, embedded - or real-time system. Say N if you are unsure. + If you don't know what to do here, say N. + +config NR_CPUS + int + depends on SMP + default "2" + +config USE_GENERIC_SMP_HELPERS + bool + depends on SMP + default y + +source "kernel/Kconfig.preempt" config MN10300_CURRENT_IN_E2 bool "Hold current task address in E2 register" + depends on !SMP default y help This option removes the E2/R2 register from the set available to gcc @@ -218,12 +244,14 @@ config MN10300_USING_JTAG suppresses the use of certain hardware debugging features, such as single-stepping, which are taken over completely by the JTAG unit. +source "kernel/Kconfig.hz" + config MN10300_RTC bool "Using MN10300 RTC" - depends on MN10300_PROC_MN103E010 + depends on MN10300_PROC_MN103E010 || MN10300_PROC_MN2WS0050 + select GENERIC_CMOS_UPDATE default n help - This option enables support for the RTC, thus enabling time to be tracked, even when system is powered down. This is available on-chip on the MN103E010. @@ -315,14 +343,23 @@ config MN10300_TTYSM1 choice prompt "Select the timer to supply the clock for SIF1" - default MN10300_TTYSM0_TIMER9 + default MN10300_TTYSM1_TIMER12 \ + if !(AM33_2 || AM33_3) + default MN10300_TTYSM1_TIMER9 \ + if AM33_2 || AM33_3 depends on MN10300_TTYSM1 +config MN10300_TTYSM1_TIMER12 + bool "Use timer 12 (16-bit)" + depends on !(AM33_2 || AM33_3) + config MN10300_TTYSM1_TIMER9 bool "Use timer 9 (16-bit)" + depends on AM33_2 || AM33_3 config MN10300_TTYSM1_TIMER3 bool "Use timer 3 (8-bit)" + depends on AM33_2 || AM33_3 endchoice @@ -337,17 +374,33 @@ config MN10300_TTYSM2 choice prompt "Select the timer to supply the clock for SIF2" - default MN10300_TTYSM0_TIMER10 + default MN10300_TTYSM2_TIMER3 \ + if !(AM33_2 || AM33_3) + default MN10300_TTYSM2_TIMER10 \ + if AM33_2 || AM33_3 depends on MN10300_TTYSM2 +config MN10300_TTYSM2_TIMER9 + bool "Use timer 9 (16-bit)" + depends on !(AM33_2 || AM33_3) + +config MN10300_TTYSM2_TIMER1 + bool "Use timer 1 (8-bit)" + depends on !(AM33_2 || AM33_3) + +config MN10300_TTYSM2_TIMER3 + bool "Use timer 3 (8-bit)" + depends on !(AM33_2 || AM33_3) + config MN10300_TTYSM2_TIMER10 bool "Use timer 10 (16-bit)" + depends on AM33_2 || AM33_3 endchoice config MN10300_TTYSM2_CTS bool "Enable the use of the CTS line /dev/ttySM2" - depends on MN10300_TTYSM2 + depends on MN10300_TTYSM2 && AM33_2 endmenu diff --git a/arch/mn10300/Makefile b/arch/mn10300/Makefile index ac5c6bd..7120282 100644 --- a/arch/mn10300/Makefile +++ b/arch/mn10300/Makefile @@ -36,6 +36,9 @@ endif ifeq ($(CONFIG_MN10300_PROC_MN103E010),y) PROCESSOR := mn103e010 endif +ifeq ($(CONFIG_MN10300_PROC_MN2WS0050),y) +PROCESSOR := mn2ws0050 +endif ifeq ($(CONFIG_MN10300_UNIT_ASB2303),y) UNIT := asb2303 @@ -43,6 +46,9 @@ endif ifeq ($(CONFIG_MN10300_UNIT_ASB2305),y) UNIT := asb2305 endif +ifeq ($(CONFIG_MN10300_UNIT_ASB2364),y) +UNIT := asb2364 +endif head-y := arch/mn10300/kernel/head.o arch/mn10300/kernel/init_task.o diff --git a/arch/mn10300/boot/compressed/head.S b/arch/mn10300/boot/compressed/head.S index 4ef608a..7b50345 100644 --- a/arch/mn10300/boot/compressed/head.S +++ b/arch/mn10300/boot/compressed/head.S @@ -15,10 +15,28 @@ #include <linux/linkage.h> #include <asm/cpu-regs.h> #include <asm/cache.h> +#ifdef CONFIG_SMP +#include <proc/smp-regs.h> +#endif .globl startup_32 startup_32: - # first save off parameters from bootloader +#ifdef CONFIG_SMP + # + # Secondary CPUs jump directly to the kernel entry point + # + # Must save primary CPU's D0-D2 registers as they hold boot parameters + # + mov (CPUID), d3 + and CPUID_MASK,d3 + beq startup_primary + mov CONFIG_KERNEL_TEXT_ADDRESS,a0 + jmp (a0) + +startup_primary: +#endif /* CONFIG_SMP */ + + # first save parameters from bootloader mov param_save_area,a0 mov d0,(a0) mov d1,(4,a0) diff --git a/arch/mn10300/include/asm/exceptions.h b/arch/mn10300/include/asm/exceptions.h index 7d8080b..ca3e205 100644 --- a/arch/mn10300/include/asm/exceptions.h +++ b/arch/mn10300/include/asm/exceptions.h @@ -114,6 +114,8 @@ extern void die(const char *, struct pt_regs *, enum exception_code) extern int die_if_no_fixup(const char *, struct pt_regs *, enum exception_code); +#define NUM2EXCEP_IRQ_LEVEL(num) (EXCEP_IRQ_LEVEL0 + (num) * 8) + #endif /* __ASSEMBLY__ */ #endif /* _ASM_EXCEPTIONS_H */ diff --git a/arch/mn10300/include/asm/frame.inc b/arch/mn10300/include/asm/frame.inc index 5b1949b..406060e 100644 --- a/arch/mn10300/include/asm/frame.inc +++ b/arch/mn10300/include/asm/frame.inc @@ -18,6 +18,9 @@ #ifndef __ASM_OFFSETS_H__ #include <asm/asm-offsets.h> #endif +#ifdef CONFIG_SMP +#include <proc/smp-regs.h> +#endif #define pi break @@ -37,9 +40,25 @@ movm [d2,d3,a2,a3,exreg0,exreg1,exother],(sp) mov sp,fp # FRAME pointer in A3 add -12,sp # allow for calls to be made +#ifdef CONFIG_SMP +#ifdef CONFIG_PREEMPT /* FIXME */ + mov epsw,d2 + and ~EPSW_IE,epsw +#endif + mov (CPUID),a0 + add a0,a0 + add a0,a0 + mov (___frame,a0),a1 + mov a1,(REG_NEXT,fp) + mov fp,(___frame,a0) +#ifdef CONFIG_PREEMPT /* FIXME */ + mov d2,epsw +#endif +#else /* CONFIG_SMP */ mov (__frame),a1 mov a1,(REG_NEXT,fp) mov fp,(__frame) +#endif /* CONFIG_SMP */ and ~EPSW_FE,epsw # disable the FPU inside the kernel @@ -57,10 +76,27 @@ .macro RESTORE_ALL # peel back the stack to the calling frame # - this permits execve() to discard extra frames due to kernel syscalls +#ifdef CONFIG_SMP +#ifdef CONFIG_PREEMPT /* FIXME */ + mov epsw,d2 + and ~EPSW_IE,epsw +#endif + mov (CPUID),a0 + add a0,a0 + add a0,a0 + mov (___frame,a0),fp + mov fp,sp + mov (REG_NEXT,fp),d0 # userspace has regs->next == 0 + mov d0,(___frame,a0) +#ifdef CONFIG_PREEMPT /* FIXME */ + mov d2,epsw +#endif +#else /* CONFIG_SMP */ mov (__frame),fp mov fp,sp mov (REG_NEXT,fp),d0 # userspace has regs->next == 0 mov d0,(__frame) +#endif /* CONFIG_SMP */ #ifndef CONFIG_MN10300_USING_JTAG mov (REG_EPSW,fp),d0 diff --git a/arch/mn10300/include/asm/hardirq.h b/arch/mn10300/include/asm/hardirq.h index 7bd9b7c..0000d65 100644 --- a/arch/mn10300/include/asm/hardirq.h +++ b/arch/mn10300/include/asm/hardirq.h @@ -19,8 +19,10 @@ /* assembly code in softirq.h is sensitive to the offsets of these fields */ typedef struct { unsigned int __softirq_pending; +#ifdef CONFIG_MN10300_WD_TIMER unsigned int __nmi_count; /* arch dependent */ unsigned int __irq_count; /* arch dependent */ +#endif } ____cacheline_aligned irq_cpustat_t; #include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */ diff --git a/arch/mn10300/include/asm/intctl-regs.h b/arch/mn10300/include/asm/intctl-regs.h index ba544c7..585b708 100644 --- a/arch/mn10300/include/asm/intctl-regs.h +++ b/arch/mn10300/include/asm/intctl-regs.h @@ -15,24 +15,19 @@ #ifdef __KERNEL__ -/* interrupt controller registers */ -#define GxICR(X) __SYSREG(0xd4000000 + (X) * 4, u16) /* group irq ctrl regs */ - -#define IAGR __SYSREG(0xd4000100, u16) /* intr acceptance group reg */ -#define IAGR_GN 0x00fc /* group number register - * (documentation _has_ to be wrong) - */ +/* + * Interrupt controller registers + * - Registers 64-191 are at addresses offset from the main array + */ +#define GxICR(X) \ + __SYSREG(0xd4000000 + (X) * 4 + \ + (((X) >= 64) && ((X) < 192)) * 0xf00, u16) -#define EXTMD __SYSREG(0xd4000200, u16) /* external pin intr spec reg */ -#define GET_XIRQ_TRIGGER(X) ((EXTMD >> ((X) * 2)) & 3) +#define GxICR_u8(X) \ + __SYSREG(0xd4000000 + (X) * 4 + \ + (((X) >= 64) && ((X) < 192)) * 0xf00, u8) -#define SET_XIRQ_TRIGGER(X,Y) \ -do { \ - u16 x = EXTMD; \ - x &= ~(3 << ((X) * 2)); \ - x |= ((Y) & 3) << ((X) * 2); \ - EXTMD = x; \ -} while (0) +#include <proc/intctl-regs.h> #define XIRQ_TRIGGER_LOWLEVEL 0 #define XIRQ_TRIGGER_HILEVEL 1 @@ -59,10 +54,18 @@ do { \ #define GxICR_LEVEL_5 0x5000 /* - level 5 */ #define GxICR_LEVEL_6 0x6000 /* - level 6 */ #define GxICR_LEVEL_SHIFT 12 +#define GxICR_NMI 0x8000 /* nmi request flag */ + +#define NUM2GxICR_LEVEL(num) ((num) << GxICR_LEVEL_SHIFT) #ifndef __ASSEMBLY__ extern void set_intr_level(int irq, u16 level); -extern void set_intr_postackable(int irq); +extern void mn10300_intc_set_level(unsigned int irq, unsigned int level); +extern void mn10300_intc_clear(unsigned int irq); +extern void mn10300_intc_set(unsigned int irq); +extern void mn10300_intc_enable(unsigned int irq); +extern void mn10300_intc_disable(unsigned int irq); +extern void mn10300_set_lateack_irq_type(int irq); #endif /* external interrupts */ diff --git a/arch/mn10300/include/asm/irq.h b/arch/mn10300/include/asm/irq.h index 25c045d..b7b8e17 100644 --- a/arch/mn10300/include/asm/irq.h +++ b/arch/mn10300/include/asm/irq.h @@ -22,7 +22,11 @@ #define NO_IRQ INT_MAX /* hardware irq numbers */ +#ifdef CONFIG_SMP +#define NR_IRQS GxICR_NUM_EXT_IRQS +#else #define NR_IRQS GxICR_NUM_IRQS +#endif /* external hardware irq numbers */ #define NR_XIRQS GxICR_NUM_XIRQS diff --git a/arch/mn10300/include/asm/irqflags.h b/arch/mn10300/include/asm/irqflags.h index b3ab207..7a7ae12 100644 --- a/arch/mn10300/include/asm/irqflags.h +++ b/arch/mn10300/include/asm/irqflags.h @@ -13,6 +13,9 @@ #define _ASM_IRQFLAGS_H #include <asm/cpu-regs.h> +#ifndef __ASSEMBLY__ +#include <linux/smp.h> +#endif /* * interrupt control @@ -60,11 +63,12 @@ static inline unsigned long arch_local_irq_save(void) /* * we make sure arch_irq_enable() doesn't cause priority inversion */ -extern unsigned long __mn10300_irq_enabled_epsw; +extern unsigned long __mn10300_irq_enabled_epsw[]; static inline void arch_local_irq_enable(void) { unsigned long tmp; + int cpu = raw_smp_processor_id(); asm volatile( " mov epsw,%0 \n" @@ -72,8 +76,8 @@ static inline void arch_local_irq_enable(void) " or %2,%0 \n" " mov %0,epsw \n" : "=&d"(tmp) - : "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw) - : "memory"); + : "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw[cpu]) + : "memory", "cc"); } static inline void arch_local_irq_restore(unsigned long flags) @@ -105,6 +109,9 @@ static inline bool arch_irqs_disabled(void) */ static inline void arch_safe_halt(void) { +#ifdef CONFIG_SMP + arch_local_irq_enable(); +#else asm volatile( " or %0,epsw \n" " nop \n" @@ -113,8 +120,21 @@ static inline void arch_safe_halt(void) : : "i"(EPSW_IE|EPSW_IM), "n"(&CPUM), "i"(CPUM_SLEEP) : "cc"); +#endif } +#define __sleep_cpu() \ +do { \ + asm volatile( \ + " bset %1,(%0)\n" \ + "1: btst %1,(%0)\n" \ + " bne 1b\n" \ + : \ + : "i"(&CPUM), "i"(CPUM_SLEEP) \ + : "cc" \ + ); \ +} while (0) + static inline void arch_local_cli(void) { asm volatile( diff --git a/arch/mn10300/include/asm/pgtable.h b/arch/mn10300/include/asm/pgtable.h index 05dda64..cd568bf 100644 --- a/arch/mn10300/include/asm/pgtable.h +++ b/arch/mn10300/include/asm/pgtable.h @@ -90,9 +90,15 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; * The vmalloc() routines also leaves a hole of 4kB between each vmalloced * area to catch addressing errors. */ +#ifndef __ASSEMBLY__ +#define VMALLOC_OFFSET (8UL * 1024 * 1024) +#define VMALLOC_START (0x70000000UL) +#define VMALLOC_END (0x7C000000UL) +#else #define VMALLOC_OFFSET (8 * 1024 * 1024) #define VMALLOC_START (0x70000000) #define VMALLOC_END (0x7C000000) +#endif #ifndef __ASSEMBLY__ extern pte_t kernel_vmalloc_ptes[(VMALLOC_END - VMALLOC_START) / PAGE_SIZE]; @@ -329,11 +335,7 @@ static inline int pte_exec_kernel(pte_t pte) return 1; } -/* - * Bits 0 and 1 are taken, split up the 29 bits of offset - * into this range: - */ -#define PTE_FILE_MAX_BITS 29 +#define PTE_FILE_MAX_BITS 30 #define pte_to_pgoff(pte) (pte_val(pte) >> 2) #define pgoff_to_pte(off) __pte((off) << 2 | _PAGE_FILE) @@ -379,8 +381,13 @@ static inline void ptep_mkdirty(pte_t *ptep) * Macro to mark a page protection value as "uncacheable". On processors which * do not support it, this is a no-op. */ -#define pgprot_noncached(prot) __pgprot(pgprot_val(prot) | _PAGE_CACHE) +#define pgprot_noncached(prot) __pgprot(pgprot_val(prot) & ~_PAGE_CACHE) +/* + * Macro to mark a page protection value as "Write-Through". + * On processors which do not support it, this is a no-op. + */ +#define pgprot_through(prot) __pgprot(pgprot_val(prot) | _PAGE_CACHE_WT) /* * Conversion functions: convert a page and protection to a page entry, diff --git a/arch/mn10300/include/asm/processor.h b/arch/mn10300/include/asm/processor.h index 0032fc7..75c422a 100644 --- a/arch/mn10300/include/asm/processor.h +++ b/arch/mn10300/include/asm/processor.h @@ -33,6 +33,8 @@ struct mm_struct; __pc; \ }) +extern void get_mem_info(unsigned long *mem_base, unsigned long *mem_size); + extern void show_registers(struct pt_regs *regs); /* @@ -43,17 +45,22 @@ extern void show_registers(struct pt_regs *regs); struct mn10300_cpuinfo { int type; - unsigned long loops_per_sec; + unsigned long loops_per_jiffy; char hard_math; - unsigned long *pgd_quick; - unsigned long *pte_quick; - unsigned long pgtable_cache_sz; }; extern struct mn10300_cpuinfo boot_cpu_data; +#ifdef CONFIG_SMP +#if CONFIG_NR_CPUS < 2 || CONFIG_NR_CPUS > 8 +# error Sorry, NR_CPUS should be 2 to 8 +#endif +extern struct mn10300_cpuinfo cpu_data[]; +#define current_cpu_data cpu_data[smp_processor_id()] +#else /* CONFIG_SMP */ #define cpu_data &boot_cpu_data #define current_cpu_data boot_cpu_data +#endif /* CONFIG_SMP */ extern void identify_cpu(struct mn10300_cpuinfo *); extern void print_cpu_info(struct mn10300_cpuinfo *); @@ -92,21 +99,21 @@ struct thread_struct { unsigned long a3; /* kernel FP */ unsigned long wchan; unsigned long usp; - struct pt_regs *__frame; + struct pt_regs *frame; unsigned long fpu_flags; #define THREAD_USING_FPU 0x00000001 /* T if this task is using the FPU */ #define THREAD_HAS_FPU 0x00000002 /* T if this task owns the FPU right now */ struct fpu_state_struct fpu_state; }; -#define INIT_THREAD \ -{ \ - .uregs = init_uregs, \ - .pc = 0, \ - .sp = 0, \ - .a3 = 0, \ - .wchan = 0, \ - .__frame = NULL, \ +#define INIT_THREAD \ +{ \ + .uregs = init_uregs, \ + .pc = 0, \ + .sp = 0, \ + .a3 = 0, \ + .wchan = 0, \ + .frame = NULL, \ } #define INIT_MMAP \ @@ -118,6 +125,19 @@ struct thread_struct { * - need to discard the frame stacked by the kernel thread invoking the execve * syscall (see RESTORE_ALL macro) */ +#if defined(CONFIG_SMP) && defined(CONFIG_PREEMPT) /* FIXME */ +#define start_thread(regs, new_pc, new_sp) do { \ + int cpu; \ + preempt_disable(); \ + cpu = CPUID; \ + set_fs(USER_DS); \ + ___frame[cpu] = current->thread.uregs; \ + ___frame[cpu]->epsw = EPSW_nSL | EPSW_IE | EPSW_IM;\ + ___frame[cpu]->pc = new_pc; \ + ___frame[cpu]->sp = new_sp; \ + preempt_enable(); \ +} while (0) +#else /* CONFIG_SMP && CONFIG_PREEMPT */ #define start_thread(regs, new_pc, new_sp) do { \ set_fs(USER_DS); \ __frame = current->thread.uregs; \ @@ -125,6 +145,7 @@ struct thread_struct { __frame->pc = new_pc; \ __frame->sp = new_sp; \ } while (0) +#endif /* CONFIG_SMP && CONFIG_PREEMPT */ /* Free all resources held by a thread. */ extern void release_thread(struct task_struct *); diff --git a/arch/mn10300/include/asm/ptrace.h b/arch/mn10300/include/asm/ptrace.h index 7c2e911..c2b77bd 100644 --- a/arch/mn10300/include/asm/ptrace.h +++ b/arch/mn10300/include/asm/ptrace.h @@ -40,7 +40,6 @@ #define PT_PC 26 #define NR_PTREGS 27 -#ifndef __ASSEMBLY__ /* * This defines the way registers are stored in the event of an exception * - the strange order is due to the MOVM instruction @@ -75,7 +74,6 @@ struct pt_regs { unsigned long epsw; unsigned long pc; }; -#endif /* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ #define PTRACE_GETREGS 12 @@ -86,12 +84,13 @@ struct pt_regs { /* options set using PTRACE_SETOPTIONS */ #define PTRACE_O_TRACESYSGOOD 0x00000001 -#if defined(__KERNEL__) +#ifdef __KERNEL__ +#ifdef CONFIG_SMP +extern struct pt_regs *___frame[]; /* current frame pointer */ +#else extern struct pt_regs *__frame; /* current frame pointer */ - -#if !defined(__ASSEMBLY__) -struct task_struct; +#endif #define user_mode(regs) (((regs)->epsw & EPSW_nSL) == EPSW_nSL) #define instruction_pointer(regs) ((regs)->pc) @@ -100,9 +99,7 @@ extern void show_regs(struct pt_regs *); #define arch_has_single_step() (1) -#endif /* !__ASSEMBLY */ - #define profile_pc(regs) ((regs)->pc) -#endif /* __KERNEL__ */ +#endif /* __KERNEL__ */ #endif /* _ASM_PTRACE_H */ diff --git a/arch/mn10300/include/asm/reset-regs.h b/arch/mn10300/include/asm/reset-regs.h index 174523d..10c7502 100644 --- a/arch/mn10300/include/asm/reset-regs.h +++ b/arch/mn10300/include/asm/reset-regs.h @@ -50,7 +50,7 @@ static inline void mn10300_proc_hard_reset(void) RSTCTR |= RSTCTR_CHIPRST; } -extern unsigned int watchdog_alert_counter; +extern unsigned int watchdog_alert_counter[]; extern void watchdog_go(void); extern asmlinkage void watchdog_handler(void); diff --git a/arch/mn10300/include/asm/rtc.h b/arch/mn10300/include/asm/rtc.h index c295194..6c14bb1 100644 --- a/arch/mn10300/include/asm/rtc.h +++ b/arch/mn10300/include/asm/rtc.h @@ -15,25 +15,14 @@ #include <linux/init.h> -extern void check_rtc_time(void); extern void __init calibrate_clock(void); -extern unsigned long __init get_initial_rtc_time(void); #else /* !CONFIG_MN10300_RTC */ -static inline void check_rtc_time(void) -{ -} - static inline void calibrate_clock(void) { } -static inline unsigned long get_initial_rtc_time(void) -{ - return 0; -} - #endif /* !CONFIG_MN10300_RTC */ #include <asm-generic/rtc.h> diff --git a/arch/mn10300/include/asm/rwlock.h b/arch/mn10300/include/asm/rwlock.h new file mode 100644 index 0000000..6d594d4 --- /dev/null +++ b/arch/mn10300/include/asm/rwlock.h @@ -0,0 +1,125 @@ +/* + * Helpers used by both rw spinlocks and rw semaphores. + * + * Based in part on code from semaphore.h and + * spinlock.h Copyright 1996 Linus Torvalds. + * + * Copyright 1999 Red Hat, Inc. + * + * Written by Benjamin LaHaise. + * + * Modified by Matsushita Electric Industrial Co., Ltd. + * Modifications: + * 13-Nov-2006 MEI Temporarily delete lock functions for SMP support. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ +#ifndef _ASM_RWLOCK_H +#define _ASM_RWLOCK_H + +#define RW_LOCK_BIAS 0x01000000 + +#ifndef CONFIG_SMP + +typedef struct { unsigned long a[100]; } __dummy_lock_t; +#define __dummy_lock(lock) (*(__dummy_lock_t *)(lock)) + +#define RW_LOCK_BIAS_STR "0x01000000" + +#define __build_read_lock_ptr(rw, helper) \ + do { \ + asm volatile( \ + " mov (%0),d3 \n" \ + " sub 1,d3 \n" \ + " mov d3,(%0) \n" \ + " blt 1f \n" \ + " bra 2f \n" \ + "1: jmp 3f \n" \ + "2: \n" \ + " .section .text.lock,\"ax\" \n" \ + "3: call "helper"[],0 \n" \ + " jmp 2b \n" \ + " .previous" \ + : \ + : "d" (rw) \ + : "memory", "d3", "cc"); \ + } while (0) + +#define __build_read_lock_const(rw, helper) \ + do { \ + asm volatile( \ + " mov (%0),d3 \n" \ + " sub 1,d3 \n" \ + " mov d3,(%0) \n" \ + " blt 1f \n" \ + " bra 2f \n" \ + "1: jmp 3f \n" \ + "2: \n" \ + " .section .text.lock,\"ax\" \n" \ + "3: call "helper"[],0 \n" \ + " jmp 2b \n" \ + " .previous" \ + : \ + : "d" (rw) \ + : "memory", "d3", "cc"); \ + } while (0) + +#define __build_read_lock(rw, helper) \ + do { \ + if (__builtin_constant_p(rw)) \ + __build_read_lock_const(rw, helper); \ + else \ + __build_read_lock_ptr(rw, helper); \ + } while (0) + +#define __build_write_lock_ptr(rw, helper) \ + do { \ + asm volatile( \ + " mov (%0),d3 \n" \ + " sub 1,d3 \n" \ + " mov d3,(%0) \n" \ + " blt 1f \n" \ + " bra 2f \n" \ + "1: jmp 3f \n" \ + "2: \n" \ + " .section .text.lock,\"ax\" \n" \ + "3: call "helper"[],0 \n" \ + " jmp 2b \n" \ + " .previous" \ + : \ + : "d" (rw) \ + : "memory", "d3", "cc"); \ + } while (0) + +#define __build_write_lock_const(rw, helper) \ + do { \ + asm volatile( \ + " mov (%0),d3 \n" \ + " sub 1,d3 \n" \ + " mov d3,(%0) \n" \ + " blt 1f \n" \ + " bra 2f \n" \ + "1: jmp 3f \n" \ + "2: \n" \ + " .section .text.lock,\"ax\" \n" \ + "3: call "helper"[],0 \n" \ + " jmp 2b \n" \ + " .previous" \ + : \ + : "d" (rw) \ + : "memory", "d3", "cc"); \ + } while (0) + +#define __build_write_lock(rw, helper) \ + do { \ + if (__builtin_constant_p(rw)) \ + __build_write_lock_const(rw, helper); \ + else \ + __build_write_lock_ptr(rw, helper); \ + } while (0) + +#endif /* CONFIG_SMP */ +#endif /* _ASM_RWLOCK_H */ diff --git a/arch/mn10300/include/asm/serial-regs.h b/arch/mn10300/include/asm/serial-regs.h index 6498469..8320cda 100644 --- a/arch/mn10300/include/asm/serial-regs.h +++ b/arch/mn10300/include/asm/serial-regs.h @@ -20,18 +20,25 @@ /* serial port 0 */ #define SC0CTR __SYSREG(0xd4002000, u16) /* control reg */ #define SC01CTR_CK 0x0007 /* clock source select */ -#define SC0CTR_CK_TM8UFLOW_8 0x0000 /* - 1/8 timer 8 underflow (serial port 0 only) */ -#define SC1CTR_CK_TM9UFLOW_8 0x0000 /* - 1/8 timer 9 underflow (serial port 1 only) */ #define SC01CTR_CK_IOCLK_8 0x0001 /* - 1/8 IOCLK */ #define SC01CTR_CK_IOCLK_32 0x0002 /* - 1/32 IOCLK */ +#define SC01CTR_CK_EXTERN_8 0x0006 /* - 1/8 external closk */ +#define SC01CTR_CK_EXTERN 0x0007 /* - external closk */ +#if defined(CONFIG_AM33_2) || defined(CONFIG_AM33_3) +#define SC0CTR_CK_TM8UFLOW_8 0x0000 /* - 1/8 timer 8 underflow (serial port 0 only) */ #define SC0CTR_CK_TM2UFLOW_2 0x0003 /* - 1/2 timer 2 underflow (serial port 0 only) */ -#define SC1CTR_CK_TM3UFLOW_2 0x0003 /* - 1/2 timer 3 underflow (serial port 1 only) */ -#define SC0CTR_CK_TM0UFLOW_8 0x0004 /* - 1/8 timer 1 underflow (serial port 0 only) */ -#define SC1CTR_CK_TM1UFLOW_8 0x0004 /* - 1/8 timer 2 underflow (serial port 1 only) */ +#define SC0CTR_CK_TM0UFLOW_8 0x0004 /* - 1/8 timer 0 underflow (serial port 0 only) */ #define SC0CTR_CK_TM2UFLOW_8 0x0005 /* - 1/8 timer 2 underflow (serial port 0 only) */ +#define SC1CTR_CK_TM9UFLOW_8 0x0000 /* - 1/8 timer 9 underflow (serial port 1 only) */ +#define SC1CTR_CK_TM3UFLOW_2 0x0003 /* - 1/2 timer 3 underflow (serial port 1 only) */ +#define SC1CTR_CK_TM1UFLOW_8 0x0004 /* - 1/8 timer 1 underflow (serial port 1 only) */ #define SC1CTR_CK_TM3UFLOW_8 0x0005 /* - 1/8 timer 3 underflow (serial port 1 only) */ -#define SC01CTR_CK_EXTERN_8 0x0006 /* - 1/8 external closk */ -#define SC01CTR_CK_EXTERN 0x0007 /* - external closk */ +#else /* CONFIG_AM33_2 || CONFIG_AM33_3 */ +#define SC0CTR_CK_TM8UFLOW_8 0x0000 /* - 1/8 timer 8 underflow (serial port 0 only) */ +#define SC0CTR_CK_TM0UFLOW_8 0x0004 /* - 1/8 timer 0 underflow (serial port 0 only) */ +#define SC0CTR_CK_TM2UFLOW_8 0x0005 /* - 1/8 timer 2 underflow (serial port 0 only) */ +#define SC1CTR_CK_TM12UFLOW_8 0x0000 /* - 1/8 timer 12 underflow (serial port 1 only) */ +#endif /* CONFIG_AM33_2 || CONFIG_AM33_3 */ #define SC01CTR_STB 0x0008 /* stop bit select */ #define SC01CTR_STB_1BIT 0x0000 /* - 1 stop bit */ #define SC01CTR_STB_2BIT 0x0008 /* - 2 stop bits */ @@ -100,11 +107,23 @@ /* serial port 2 */ #define SC2CTR __SYSREG(0xd4002020, u16) /* control reg */ +#ifdef CONFIG_AM33_2 #define SC2CTR_CK 0x0003 /* clock source select */ #define SC2CTR_CK_TM10UFLOW 0x0000 /* - timer 10 underflow */ #define SC2CTR_CK_TM2UFLOW 0x0001 /* - timer 2 underflow */ #define SC2CTR_CK_EXTERN 0x0002 /* - external closk */ #define SC2CTR_CK_TM3UFLOW 0x0003 /* - timer 3 underflow */ +#else /* CONFIG_AM33_2 */ +#define SC2CTR_CK 0x0007 /* clock source select */ +#define SC2CTR_CK_TM9UFLOW_8 0x0000 /* - 1/8 timer 9 underflow */ +#define SC2CTR_CK_IOCLK_8 0x0001 /* - 1/8 IOCLK */ +#define SC2CTR_CK_IOCLK_32 0x0002 /* - 1/32 IOCLK */ +#define SC2CTR_CK_TM3UFLOW_2 0x0003 /* - 1/2 timer 3 underflow */ +#define SC2CTR_CK_TM1UFLOW_8 0x0004 /* - 1/8 timer 1 underflow */ +#define SC2CTR_CK_TM3UFLOW_8 0x0005 /* - 1/8 timer 3 underflow */ +#define SC2CTR_CK_EXTERN_8 0x0006 /* - 1/8 external closk */ +#define SC2CTR_CK_EXTERN 0x0007 /* - external closk */ +#endif /* CONFIG_AM33_2 */ #define SC2CTR_STB 0x0008 /* stop bit select */ #define SC2CTR_STB_1BIT 0x0000 /* - 1 stop bit */ #define SC2CTR_STB_2BIT 0x0008 /* - 2 stop bits */ @@ -134,9 +153,14 @@ #define SC2ICR_RES 0x04 /* receive error select */ #define SC2ICR_RI 0x01 /* receive interrupt cause */ -#define SC2TXB __SYSREG(0xd4002018, u8) /* transmit buffer reg */ -#define SC2RXB __SYSREG(0xd4002019, u8) /* receive buffer reg */ -#define SC2STR __SYSREG(0xd400201c, u8) /* status reg */ +#define SC2TXB __SYSREG(0xd4002028, u8) /* transmit buffer reg */ +#define SC2RXB __SYSREG(0xd4002029, u8) /* receive buffer reg */ + +#ifdef CONFIG_AM33_2 +#define SC2STR __SYSREG(0xd400202c, u8) /* status reg */ +#else /* CONFIG_AM33_2 */ +#define SC2STR __SYSREG(0xd400202c, u16) /* status reg */ +#endif /* CONFIG_AM33_2 */ #define SC2STR_OEF 0x0001 /* overrun error found */ #define SC2STR_PEF 0x0002 /* parity error found */ #define SC2STR_FEF 0x0004 /* framing error found */ @@ -146,10 +170,17 @@ #define SC2STR_RXF 0x0040 /* receive status */ #define SC2STR_TXF 0x0080 /* transmit status */ +#ifdef CONFIG_AM33_2 #define SC2TIM __SYSREG(0xd400202d, u8) /* status reg */ +#endif +#ifdef CONFIG_AM33_2 #define SC2RXIRQ 24 /* serial 2 Receive IRQ */ #define SC2TXIRQ 25 /* serial 2 Transmit IRQ */ +#else /* CONFIG_AM33_2 */ +#define SC2RXIRQ 68 /* serial 2 Receive IRQ */ +#define SC2TXIRQ 69 /* serial 2 Transmit IRQ */ +#endif /* CONFIG_AM33_2 */ #define SC2RXICR GxICR(SC2RXIRQ) /* serial 2 receive intr ctrl reg */ #define SC2TXICR GxICR(SC2TXIRQ) /* serial 2 transmit intr ctrl reg */ diff --git a/arch/mn10300/include/asm/serial.h b/arch/mn10300/include/asm/serial.h index a29445c..23a7992 100644 --- a/arch/mn10300/include/asm/serial.h +++ b/arch/mn10300/include/asm/serial.h @@ -9,10 +9,8 @@ * 2 of the Licence, or (at your option) any later version. */ -/* - * The ASB2305 has an 18.432 MHz clock the UART - */ -#define BASE_BAUD (18432000 / 16) +#ifndef _ASM_SERIAL_H +#define _ASM_SERIAL_H /* Standard COM flags (except for COM4, because of the 8514 problem) */ #ifdef CONFIG_SERIAL_DETECT_IRQ @@ -34,3 +32,5 @@ #endif #include <unit/serial.h> + +#endif /* _ASM_SERIAL_H */ diff --git a/arch/mn10300/include/asm/smp.h b/arch/mn10300/include/asm/smp.h index 4eb8c61..b8585b4 100644 --- a/arch/mn10300/include/asm/smp.h +++ b/arch/mn10300/include/asm/smp.h @@ -3,6 +3,16 @@ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) * + * Modified by Matsushita Electric Industrial Co., Ltd. + * Modifications: + * 13-Nov-2006 MEI Define IPI-IRQ number and add inline/macro function + * for SMP support. + * 22-Jan-2007 MEI Add the define related to SMP_BOOT_IRQ. + * 23-Feb-2007 MEI Add the define related to SMP icahce invalidate. + * 23-Jun-2008 MEI Delete INTC_IPI. + * 22-Jul-2008 MEI Add smp_nmi_call_function and related defines. + * 04-Aug-2008 MEI Delete USE_DOIRQ_CACHE_IPI. + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public Licence * as published by the Free Software Foundation; either version @@ -11,8 +21,98 @@ #ifndef _ASM_SMP_H #define _ASM_SMP_H +#ifndef __ASSEMBLY__ +#include <linux/threads.h> +#include <linux/cpumask.h> +#endif + #ifdef CONFIG_SMP -#error SMP not yet supported for MN10300 +#include <proc/smp-regs.h> + +#define RESCHEDULE_IPI 63 +#define CALL_FUNC_SINGLE_IPI 192 +#define LOCAL_TIMER_IPI 193 +#define FLUSH_CACHE_IPI 194 +#define CALL_FUNCTION_NMI_IPI 195 +#define GDB_NMI_IPI 196 + +#define SMP_BOOT_IRQ 195 + +#define RESCHEDULE_GxICR_LV GxICR_LEVEL_6 +#define CALL_FUNCTION_GxICR_LV GxICR_LEVEL_4 +#define LOCAL_TIMER_GxICR_LV GxICR_LEVEL_4 +#define FLUSH_CACHE_GxICR_LV GxICR_LEVEL_0 +#define SMP_BOOT_GxICR_LV GxICR_LEVEL_0 + +#define TIME_OUT_COUNT_BOOT_IPI 100 +#define DELAY_TIME_BOOT_IPI 75000 + + +#ifndef __ASSEMBLY__ + +/** + * raw_smp_processor_id - Determine the raw CPU ID of the CPU running it + * + * What we really want to do is to use the CPUID hardware CPU register to get + * this information, but accesses to that aren't cached, and run at system bus + * speed, not CPU speed. A copy of this value is, however, stored in the + * thread_info struct, and that can be cached. + * + * An alternate way of dealing with this could be to use the EPSW.S bits to + * cache this information for systems with up to four CPUs. + */ +#if 0 +#define raw_smp_processor_id() (CPUID) +#else +#define raw_smp_processor_id() (current_thread_info()->cpu) #endif +static inline int cpu_logical_map(int cpu) +{ + return cpu; +} + +static inline int cpu_number_map(int cpu) +{ + return cpu; +} + + +extern cpumask_t cpu_boot_map; + +extern void smp_init_cpus(void); +extern void smp_cache_interrupt(void); +extern void send_IPI_allbutself(int irq); +extern int smp_nmi_call_function(smp_call_func_t func, void *info, int wait); + +extern void arch_send_call_function_single_ipi(int cpu); +extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); + +#ifdef CONFIG_HOTPLUG_CPU +extern int __cpu_disable(void); +extern void __cpu_die(unsigned int cpu); +#endif /* CONFIG_HOTPLUG_CPU */ + +#ifdef CONFIG_PREEMPT /* FIXME */ +#define __frame \ + ({ \ + struct pt_regs *f; \ + preempt_disable(); \ + f = ___frame[CPUID]; \ + preempt_enable(); \ + f; \ + }) +#else +#define __frame ___frame[CPUID] #endif + +#endif /* __ASSEMBLY__ */ +#else /* CONFIG_SMP */ +#ifndef __ASSEMBLY__ + +static inline void smp_init_cpus(void) {} + +#endif /* __ASSEMBLY__ */ +#endif /* CONFIG_SMP */ + +#endif /* _ASM_SMP_H */ diff --git a/arch/mn10300/include/asm/spinlock.h b/arch/mn10300/include/asm/spinlock.h index 4bf9c8b..9342915 100644 --- a/arch/mn10300/include/asm/spinlock.h +++ b/arch/mn10300/include/asm/spinlock.h @@ -11,6 +11,183 @@ #ifndef _ASM_SPINLOCK_H #define _ASM_SPINLOCK_H -#error SMP spinlocks not implemented for MN10300 +#include <asm/atomic.h> +#include <asm/rwlock.h> +#include <asm/page.h> +/* + * Simple spin lock operations. There are two variants, one clears IRQ's + * on the local processor, one does not. + * + * We make no fairness assumptions. They have a cost. + */ + +#define arch_spin_is_locked(x) (*(volatile signed char *)(&(x)->slock) != 0) +#define arch_spin_unlock_wait(x) do { barrier(); } while (arch_spin_is_locked(x)) + +static inline void arch_spin_unlock(arch_spinlock_t *lock) +{ + asm volatile( + " bclr 1,(0,%0) \n" + : + : "a"(&lock->slock) + : "memory", "cc"); +} + +static inline int arch_spin_trylock(arch_spinlock_t *lock) +{ + int ret; + + asm volatile( + " mov 1,%0 \n" + " bset %0,(%1) \n" + " bne 1f \n" + " clr %0 \n" + "1: xor 1,%0 \n" + : "=d"(ret) + : "a"(&lock->slock) + : "memory", "cc"); + + return ret; +} + +static inline void arch_spin_lock(arch_spinlock_t *lock) +{ + asm volatile( + "1: bset 1,(0,%0) \n" + " bne 1b \n" + : + : "a"(&lock->slock) + : "memory", "cc"); +} + +static inline void arch_spin_lock_flags(arch_spinlock_t *lock, + unsigned long flags) +{ + int temp; + + asm volatile( + "1: bset 1,(0,%2) \n" + " beq 3f \n" + " mov %1,epsw \n" + "2: mov (0,%2),%0 \n" + " or %0,%0 \n" + " bne 2b \n" + " mov %3,%0 \n" + " mov %0,epsw \n" + " nop \n" + " nop \n" + " bra 1b\n" + "3: \n" + : "=&d" (temp) + : "d" (flags), "a"(&lock->slock), "i"(EPSW_IE | MN10300_CLI_LEVEL) + : "memory", "cc"); +} + +#ifdef __KERNEL__ + +/* + * Read-write spinlocks, allowing multiple readers + * but only one writer. + * + * NOTE! it is quite common to have readers in interrupts + * but no interrupt writers. For those circumstances we + * can "mix" irq-safe locks - any writer needs to get a + * irq-safe write-lock, but readers can get non-irqsafe + * read-locks. + */ + +/** + * read_can_lock - would read_trylock() succeed? + * @lock: the rwlock in question. + */ +#define arch_read_can_lock(x) ((int)(x)->lock > 0) + +/** + * write_can_lock - would write_trylock() succeed? + * @lock: the rwlock in question. + */ +#define arch_write_can_lock(x) ((x)->lock == RW_LOCK_BIAS) + +/* + * On mn10300, we implement read-write locks as a 32-bit counter + * with the high bit (sign) being the "contended" bit. + */ +static inline void arch_read_lock(arch_rwlock_t *rw) +{ +#if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT + __build_read_lock(rw, "__read_lock_failed"); +#else + { + atomic_t *count = (atomic_t *)rw; + while (atomic_dec_return(count) < 0) + atomic_inc(count); + } +#endif +} + +static inline void arch_write_lock(arch_rwlock_t *rw) +{ +#if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT + __build_write_lock(rw, "__write_lock_failed"); +#else + { + atomic_t *count = (atomic_t *)rw; + while (!atomic_sub_and_test(RW_LOCK_BIAS, count)) + atomic_add(RW_LOCK_BIAS, count); + } +#endif +} + +static inline void arch_read_unlock(arch_rwlock_t *rw) +{ +#if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT + __build_read_unlock(rw); +#else + { + atomic_t *count = (atomic_t *)rw; + atomic_inc(count); + } +#endif +} + +static inline void arch_write_unlock(arch_rwlock_t *rw) +{ +#if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT + __build_write_unlock(rw); +#else + { + atomic_t *count = (atomic_t *)rw; + atomic_add(RW_LOCK_BIAS, count); + } +#endif +} + +static inline int arch_read_trylock(arch_rwlock_t *lock) +{ + atomic_t *count = (atomic_t *)lock; + atomic_dec(count); + if (atomic_read(count) >= 0) + return 1; + atomic_inc(count); + return 0; +} + +static inline int arch_write_trylock(arch_rwlock_t *lock) +{ + atomic_t *count = (atomic_t *)lock; + if (atomic_sub_and_test(RW_LOCK_BIAS, count)) + return 1; + atomic_add(RW_LOCK_BIAS, count); + return 0; +} + +#define arch_read_lock_flags(lock, flags) arch_read_lock(lock) +#define arch_write_lock_flags(lock, flags) arch_write_lock(lock) + +#define _raw_spin_relax(lock) cpu_relax() +#define _raw_read_relax(lock) cpu_relax() +#define _raw_write_relax(lock) cpu_relax() + +#endif /* __KERNEL__ */ #endif /* _ASM_SPINLOCK_H */ diff --git a/arch/mn10300/include/asm/spinlock_types.h b/arch/mn10300/include/asm/spinlock_types.h new file mode 100644 index 0000000..653dc51 --- /dev/null +++ b/arch/mn10300/include/asm/spinlock_types.h @@ -0,0 +1,20 @@ +#ifndef _ASM_SPINLOCK_TYPES_H +#define _ASM_SPINLOCK_TYPES_H + +#ifndef __LINUX_SPINLOCK_TYPES_H +# error "please don't include this file directly" +#endif + +typedef struct arch_spinlock { + unsigned int slock; +} arch_spinlock_t; + +#define __ARCH_SPIN_LOCK_UNLOCKED { 0 } + +typedef struct { + unsigned int lock; +} arch_rwlock_t; + +#define __ARCH_RW_LOCK_UNLOCKED { RW_LOCK_BIAS } + +#endif /* _ASM_SPINLOCK_TYPES_H */ diff --git a/arch/mn10300/include/asm/system.h b/arch/mn10300/include/asm/system.h index 7de90bc..8ff3e5a 100644 --- a/arch/mn10300/include/asm/system.h +++ b/arch/mn10300/include/asm/system.h @@ -12,6 +12,7 @@ #define _ASM_SYSTEM_H #include <asm/cpu-regs.h> +#include <asm/intctl-regs.h> #ifdef __KERNEL__ #ifndef __ASSEMBLY__ @@ -57,8 +58,6 @@ do { \ #define nop() asm volatile ("nop") -#endif /* !__ASSEMBLY__ */ - /* * Force strict CPU ordering. * And yes, this is required on UP too when we're talking @@ -85,17 +84,19 @@ do { \ #define smp_mb() mb() #define smp_rmb() rmb() #define smp_wmb() wmb() -#else +#define set_mb(var, value) do { xchg(&var, value); } while (0) +#else /* CONFIG_SMP */ #define smp_mb() barrier() #define smp_rmb() barrier() #define smp_wmb() barrier() -#endif - #define set_mb(var, value) do { var = value; mb(); } while (0) +#endif /* CONFIG_SMP */ + #define set_wmb(var, value) do { var = value; wmb(); } while (0) #define read_barrier_depends() do {} while (0) #define smp_read_barrier_depends() do {} while (0) +#endif /* !__ASSEMBLY__ */ #endif /* __KERNEL__ */ #endif /* _ASM_SYSTEM_H */ diff --git a/arch/mn10300/include/asm/timer-regs.h b/arch/mn10300/include/asm/timer-regs.h index 1d883b7..c634977 100644 --- a/arch/mn10300/include/asm/timer-regs.h +++ b/arch/mn10300/include/asm/timer-regs.h @@ -17,21 +17,27 @@ #ifdef __KERNEL__ -/* timer prescalar control */ +/* + * Timer prescalar control + */ #define TMPSCNT __SYSREG(0xd4003071, u8) /* timer prescaler control */ #define TMPSCNT_ENABLE 0x80 /* timer prescaler enable */ #define TMPSCNT_DISABLE 0x00 /* timer prescaler disable */ -/* 8 bit timers */ +/* + * 8-bit timers + */ #define TM0MD __SYSREG(0xd4003000, u8) /* timer 0 mode register */ #define TM0MD_SRC 0x07 /* timer source */ #define TM0MD_SRC_IOCLK 0x00 /* - IOCLK */ #define TM0MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ #define TM0MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM0MD_SRC_TM2IO 0x03 /* - TM2IO pin input */ #define TM0MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ #define TM0MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) +#define TM0MD_SRC_TM2IO 0x03 /* - TM2IO pin input */ #define TM0MD_SRC_TM0IO 0x07 /* - TM0IO pin input */ +#endif /* CONFIG_AM33_2 */ #define TM0MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM0MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -43,7 +49,9 @@ #define TM1MD_SRC_TM0CASCADE 0x03 /* - cascade with timer 0 */ #define TM1MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM1MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) #define TM1MD_SRC_TM1IO 0x07 /* - TM1IO pin input */ +#endif /* CONFIG_AM33_2 */ #define TM1MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM1MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -55,7 +63,9 @@ #define TM2MD_SRC_TM1CASCADE 0x03 /* - cascade with timer 1 */ #define TM2MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM2MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#if defined(CONFIG_AM33_2) #define TM2MD_SRC_TM2IO 0x07 /* - TM2IO pin input */ +#endif /* CONFIG_AM33_2 */ #define TM2MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM2MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -64,11 +74,13 @@ #define TM3MD_SRC_IOCLK 0x00 /* - IOCLK */ #define TM3MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ #define TM3MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM3MD_SRC_TM1CASCADE 0x03 /* - cascade with timer 2 */ +#define TM3MD_SRC_TM2CASCADE 0x03 /* - cascade with timer 2 */ #define TM3MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM3MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ #define TM3MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) #define TM3MD_SRC_TM3IO 0x07 /* - TM3IO pin input */ +#endif /* CONFIG_AM33_2 */ #define TM3MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM3MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -96,7 +108,9 @@ #define TM2ICR GxICR(TM2IRQ) /* timer 2 uflow intr ctrl reg */ #define TM3ICR GxICR(TM3IRQ) /* timer 3 uflow intr ctrl reg */ -/* 16-bit timers 4,5 & 7-11 */ +/* + * 16-bit timers 4,5 & 7-15 + */ #define TM4MD __SYSREG(0xd4003080, u8) /* timer 4 mode register */ #define TM4MD_SRC 0x07 /* timer source */ #define TM4MD_SRC_IOCLK 0x00 /* - IOCLK */ @@ -105,7 +119,9 @@ #define TM4MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM4MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ #define TM4MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) #define TM4MD_SRC_TM4IO 0x07 /* - TM4IO pin input */ +#endif /* CONFIG_AM33_2 */ #define TM4MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM4MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -118,7 +134,11 @@ #define TM5MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM5MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ #define TM5MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) #define TM5MD_SRC_TM5IO 0x07 /* - TM5IO pin input */ +#else /* !CONFIG_AM33_2 */ +#define TM5MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ +#endif /* CONFIG_AM33_2 */ #define TM5MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM5MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -130,7 +150,9 @@ #define TM7MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM7MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ #define TM7MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) #define TM7MD_SRC_TM7IO 0x07 /* - TM7IO pin input */ +#endif /* CONFIG_AM33_2 */ #define TM7MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM7MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -143,7 +165,11 @@ #define TM8MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM8MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ #define TM8MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) #define TM8MD_SRC_TM8IO 0x07 /* - TM8IO pin input */ +#else /* !CONFIG_AM33_2 */ +#define TM8MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ +#endif /* CONFIG_AM33_2 */ #define TM8MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM8MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -156,7 +182,11 @@ #define TM9MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM9MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ #define TM9MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) #define TM9MD_SRC_TM9IO 0x07 /* - TM9IO pin input */ +#else /* !CONFIG_AM33_2 */ +#define TM9MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ +#endif /* CONFIG_AM33_2 */ #define TM9MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM9MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -169,7 +199,11 @@ #define TM10MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM10MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ #define TM10MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) #define TM10MD_SRC_TM10IO 0x07 /* - TM10IO pin input */ +#else /* !CONFIG_AM33_2 */ +#define TM10MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ +#endif /* CONFIG_AM33_2 */ #define TM10MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM10MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -178,32 +212,101 @@ #define TM11MD_SRC_IOCLK 0x00 /* - IOCLK */ #define TM11MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ #define TM11MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM11MD_SRC_TM7CASCADE 0x03 /* - cascade with timer 7 */ #define TM11MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM11MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ #define TM11MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) #define TM11MD_SRC_TM11IO 0x07 /* - TM11IO pin input */ +#else /* !CONFIG_AM33_2 */ +#define TM11MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ +#endif /* CONFIG_AM33_2 */ #define TM11MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM11MD_COUNT_ENABLE 0x80 /* timer count enable */ +#if defined(CONFIG_AM34_2) +#define TM12MD __SYSREG(0xd4003180, u8) /* timer 11 mode register */ +#define TM12MD_SRC 0x07 /* timer source */ +#define TM12MD_SRC_IOCLK 0x00 /* - IOCLK */ +#define TM12MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ +#define TM12MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ +#define TM12MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ +#define TM12MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#define TM12MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#define TM12MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ +#define TM12MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ +#define TM12MD_COUNT_ENABLE 0x80 /* timer count enable */ + +#define TM13MD __SYSREG(0xd4003182, u8) /* timer 11 mode register */ +#define TM13MD_SRC 0x07 /* timer source */ +#define TM13MD_SRC_IOCLK 0x00 /* - IOCLK */ +#define TM13MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ +#define TM13MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ +#define TM13MD_SRC_TM12CASCADE 0x03 /* - cascade with timer 12 */ +#define TM13MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ +#define TM13MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#define TM13MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#define TM13MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ +#define TM13MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ +#define TM13MD_COUNT_ENABLE 0x80 /* timer count enable */ + +#define TM14MD __SYSREG(0xd4003184, u8) /* timer 11 mode register */ +#define TM14MD_SRC 0x07 /* timer source */ +#define TM14MD_SRC_IOCLK 0x00 /* - IOCLK */ +#define TM14MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ +#define TM14MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ +#define TM14MD_SRC_TM13CASCADE 0x03 /* - cascade with timer 13 */ +#define TM14MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ +#define TM14MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#define TM14MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#define TM14MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ +#define TM14MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ +#define TM14MD_COUNT_ENABLE 0x80 /* timer count enable */ + +#define TM15MD __SYSREG(0xd4003186, u8) /* timer 11 mode register */ +#define TM15MD_SRC 0x07 /* timer source */ +#define TM15MD_SRC_IOCLK 0x00 /* - IOCLK */ +#define TM15MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ +#define TM15MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ +#define TM15MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ +#define TM15MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#define TM15MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#define TM15MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ +#define TM15MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ +#define TM15MD_COUNT_ENABLE 0x80 /* timer count enable */ +#endif /* CONFIG_AM34_2 */ + + #define TM4BR __SYSREG(0xd4003090, u16) /* timer 4 base register */ #define TM5BR __SYSREG(0xd4003092, u16) /* timer 5 base register */ +#define TM45BR __SYSREG(0xd4003090, u32) /* timer 4:5 base register */ #define TM7BR __SYSREG(0xd4003096, u16) /* timer 7 base register */ #define TM8BR __SYSREG(0xd4003098, u16) /* timer 8 base register */ #define TM9BR __SYSREG(0xd400309a, u16) /* timer 9 base register */ +#define TM89BR __SYSREG(0xd4003098, u32) /* timer 8:9 base register */ #define TM10BR __SYSREG(0xd400309c, u16) /* timer 10 base register */ #define TM11BR __SYSREG(0xd400309e, u16) /* timer 11 base register */ -#define TM45BR __SYSREG(0xd4003090, u32) /* timer 4:5 base register */ +#if defined(CONFIG_AM34_2) +#define TM12BR __SYSREG(0xd4003190, u16) /* timer 12 base register */ +#define TM13BR __SYSREG(0xd4003192, u16) /* timer 13 base register */ +#define TM14BR __SYSREG(0xd4003194, u16) /* timer 14 base register */ +#define TM15BR __SYSREG(0xd4003196, u16) /* timer 15 base register */ +#endif /* CONFIG_AM34_2 */ #define TM4BC __SYSREG(0xd40030a0, u16) /* timer 4 binary counter */ #define TM5BC __SYSREG(0xd40030a2, u16) /* timer 5 binary counter */ #define TM45BC __SYSREG(0xd40030a0, u32) /* timer 4:5 binary counter */ - #define TM7BC __SYSREG(0xd40030a6, u16) /* timer 7 binary counter */ #define TM8BC __SYSREG(0xd40030a8, u16) /* timer 8 binary counter */ #define TM9BC __SYSREG(0xd40030aa, u16) /* timer 9 binary counter */ +#define TM89BC __SYSREG(0xd40030a8, u32) /* timer 8:9 binary counter */ #define TM10BC __SYSREG(0xd40030ac, u16) /* timer 10 binary counter */ #define TM11BC __SYSREG(0xd40030ae, u16) /* timer 11 binary counter */ +#if defined(CONFIG_AM34_2) +#define TM12BC __SYSREG(0xd40031a0, u16) /* timer 12 binary counter */ +#define TM13BC __SYSREG(0xd40031a2, u16) /* timer 13 binary counter */ +#define TM14BC __SYSREG(0xd40031a4, u16) /* timer 14 binary counter */ +#define TM15BC __SYSREG(0xd40031a6, u16) /* timer 15 binary counter */ +#endif /* CONFIG_AM34_2 */ #define TM4IRQ 6 /* timer 4 IRQ */ #define TM5IRQ 7 /* timer 5 IRQ */ @@ -212,6 +315,12 @@ #define TM9IRQ 13 /* timer 9 IRQ */ #define TM10IRQ 14 /* timer 10 IRQ */ #define TM11IRQ 15 /* timer 11 IRQ */ +#if defined(CONFIG_AM34_2) +#define TM12IRQ 64 /* timer 12 IRQ */ +#define TM13IRQ 65 /* timer 13 IRQ */ +#define TM14IRQ 66 /* timer 14 IRQ */ +#define TM15IRQ 67 /* timer 15 IRQ */ +#endif /* CONFIG_AM34_2 */ #define TM4ICR GxICR(TM4IRQ) /* timer 4 uflow intr ctrl reg */ #define TM5ICR GxICR(TM5IRQ) /* timer 5 uflow intr ctrl reg */ @@ -220,8 +329,16 @@ #define TM9ICR GxICR(TM9IRQ) /* timer 9 uflow intr ctrl reg */ #define TM10ICR GxICR(TM10IRQ) /* timer 10 uflow intr ctrl reg */ #define TM11ICR GxICR(TM11IRQ) /* timer 11 uflow intr ctrl reg */ - -/* 16-bit timer 6 */ +#if defined(CONFIG_AM34_2) +#define TM12ICR GxICR(TM12IRQ) /* timer 12 uflow intr ctrl reg */ +#define TM13ICR GxICR(TM13IRQ) /* timer 13 uflow intr ctrl reg */ +#define TM14ICR GxICR(TM14IRQ) /* timer 14 uflow intr ctrl reg */ +#define TM15ICR GxICR(TM15IRQ) /* timer 15 uflow intr ctrl reg */ +#endif /* CONFIG_AM34_2 */ + +/* + * 16-bit timer 6 + */ #define TM6MD __SYSREG(0xd4003084, u16) /* timer6 mode register */ #define TM6MD_SRC 0x0007 /* timer source */ #define TM6MD_SRC_IOCLK 0x0000 /* - IOCLK */ @@ -229,10 +346,14 @@ #define TM6MD_SRC_IOCLK_32 0x0002 /* - 1/32 IOCLK */ #define TM6MD_SRC_TM0UFLOW 0x0004 /* - timer 0 underflow */ #define TM6MD_SRC_TM1UFLOW 0x0005 /* - timer 1 underflow */ -#define TM6MD_SRC_TM6IOB_BOTH 0x0006 /* - TM6IOB pin input (both edges) */ +#define TM6MD_SRC_TM2UFLOW 0x0006 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) +/* #define TM6MD_SRC_TM6IOB_BOTH 0x0006 */ /* - TM6IOB pin input (both edges) */ #define TM6MD_SRC_TM6IOB_SINGLE 0x0007 /* - TM6IOB pin input (single edge) */ -#define TM6MD_CLR_ENABLE 0x0010 /* clear count enable */ +#endif /* CONFIG_AM33_2 */ #define TM6MD_ONESHOT_ENABLE 0x0040 /* oneshot count */ +#define TM6MD_CLR_ENABLE 0x0010 /* clear count enable */ +#if defined(CONFIG_AM33_2) #define TM6MD_TRIG_ENABLE 0x0080 /* TM6IOB pin trigger enable */ #define TM6MD_PWM 0x3800 /* PWM output mode */ #define TM6MD_PWM_DIS 0x0000 /* - disabled */ @@ -240,10 +361,15 @@ #define TM6MD_PWM_11BIT 0x1800 /* - 11 bits mode */ #define TM6MD_PWM_12BIT 0x3000 /* - 12 bits mode */ #define TM6MD_PWM_14BIT 0x3800 /* - 14 bits mode */ +#endif /* CONFIG_AM33_2 */ + #define TM6MD_INIT_COUNTER 0x4000 /* initialize TMnBC to zero */ #define TM6MD_COUNT_ENABLE 0x8000 /* timer count enable */ #define TM6MDA __SYSREG(0xd40030b4, u8) /* timer6 cmp/cap A mode reg */ +#define TM6MDA_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */ +#define TM6MDA_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */ +#if defined(CONFIG_AM33_2) #define TM6MDA_OUT 0x07 /* output select */ #define TM6MDA_OUT_SETA_RESETB 0x00 /* - set at match A, reset at match B */ #define TM6MDA_OUT_SETA_RESETOV 0x01 /* - set at match A, reset at overflow */ @@ -251,30 +377,35 @@ #define TM6MDA_OUT_RESETA 0x03 /* - reset at match A */ #define TM6MDA_OUT_TOGGLE 0x04 /* - toggle on match A */ #define TM6MDA_MODE 0xc0 /* compare A register mode */ -#define TM6MDA_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */ -#define TM6MDA_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */ #define TM6MDA_MODE_CAP_S_EDGE 0x80 /* - capture, single edge mode */ #define TM6MDA_MODE_CAP_D_EDGE 0xc0 /* - capture, double edge mode */ #define TM6MDA_EDGE 0x20 /* compare A edge select */ #define TM6MDA_EDGE_FALLING 0x00 /* capture on falling edge */ #define TM6MDA_EDGE_RISING 0x20 /* capture on rising edge */ #define TM6MDA_CAPTURE_ENABLE 0x10 /* capture enable */ +#else /* !CONFIG_AM33_2 */ +#define TM6MDA_MODE 0x40 /* compare A register mode */ +#endif /* CONFIG_AM33_2 */ #define TM6MDB __SYSREG(0xd40030b5, u8) /* timer6 cmp/cap B mode reg */ +#define TM6MDB_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */ +#define TM6MDB_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */ +#if defined(CONFIG_AM33_2) #define TM6MDB_OUT 0x07 /* output select */ #define TM6MDB_OUT_SETB_RESETA 0x00 /* - set at match B, reset at match A */ #define TM6MDB_OUT_SETB_RESETOV 0x01 /* - set at match B */ #define TM6MDB_OUT_RESETB 0x03 /* - reset at match B */ #define TM6MDB_OUT_TOGGLE 0x04 /* - toggle on match B */ #define TM6MDB_MODE 0xc0 /* compare B register mode */ -#define TM6MDB_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */ -#define TM6MDB_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */ #define TM6MDB_MODE_CAP_S_EDGE 0x80 /* - capture, single edge mode */ #define TM6MDB_MODE_CAP_D_EDGE 0xc0 /* - capture, double edge mode */ #define TM6MDB_EDGE 0x20 /* compare B edge select */ #define TM6MDB_EDGE_FALLING 0x00 /* capture on falling edge */ #define TM6MDB_EDGE_RISING 0x20 /* capture on rising edge */ #define TM6MDB_CAPTURE_ENABLE 0x10 /* capture enable */ +#else /* !CONFIG_AM33_2 */ +#define TM6MDB_MODE 0x40 /* compare B register mode */ +#endif /* CONFIG_AM33_2 */ #define TM6CA __SYSREG(0xd40030c4, u16) /* timer6 cmp/capture reg A */ #define TM6CB __SYSREG(0xd40030d4, u16) /* timer6 cmp/capture reg B */ @@ -288,6 +419,34 @@ #define TM6AICR GxICR(TM6AIRQ) /* timer 6A intr control reg */ #define TM6BICR GxICR(TM6BIRQ) /* timer 6B intr control reg */ +#if defined(CONFIG_AM34_2) +/* + * MTM: OS Tick-Timer + */ +#define TMTMD __SYSREG(0xd4004100, u8) /* Tick Timer mode register */ +#define TMTMD_TMTLDE 0x40 /* initialize TMTBC = TMTBR */ +#define TMTMD_TMTCNE 0x80 /* timer count enable */ + +#define TMTBR __SYSREG(0xd4004110, u32) /* Tick Timer mode reg */ +#define TMTBC __SYSREG(0xd4004120, u32) /* Tick Timer mode reg */ + +/* + * MTM: OS Timestamp-Timer + */ +#define TMSMD __SYSREG(0xd4004140, u8) /* Tick Timer mode register */ +#define TMSMD_TMSLDE 0x40 /* initialize TMSBC = TMSBR */ +#define TMSMD_TMSCNE 0x80 /* timer count enable */ + +#define TMSBR __SYSREG(0xd4004150, u32) /* Tick Timer mode register */ +#define TMSBC __SYSREG(0xd4004160, u32) /* Tick Timer mode register */ + +#define TMTIRQ 119 /* OS Tick timer IRQ */ +#define TMSIRQ 120 /* Timestamp timer IRQ */ + +#define TMTICR GxICR(TMTIRQ) /* OS Tick timer uflow intr ctrl reg */ +#define TMSICR GxICR(TMSIRQ) /* Timestamp timer uflow intr ctrl reg */ +#endif /* CONFIG_AM34_2 */ + #endif /* __KERNEL__ */ #endif /* _ASM_TIMER_REGS_H */ diff --git a/arch/mn10300/include/asm/timex.h b/arch/mn10300/include/asm/timex.h index 8d031f9..ce5719a 100644 --- a/arch/mn10300/include/asm/timex.h +++ b/arch/mn10300/include/asm/timex.h @@ -16,8 +16,7 @@ #define TICK_SIZE (tick_nsec / 1000) -#define CLOCK_TICK_RATE 1193180 /* Underlying HZ - this should probably be set - * to something appropriate, but what? */ +#define CLOCK_TICK_RATE MN10300_JCCLK /* Underlying HZ */ extern cycles_t cacheflush_time; diff --git a/arch/mn10300/include/asm/uaccess.h b/arch/mn10300/include/asm/uaccess.h index 197a7af..47e7951 100644 --- a/arch/mn10300/include/asm/uaccess.h +++ b/arch/mn10300/include/asm/uaccess.h @@ -377,7 +377,7 @@ unsigned long __generic_copy_to_user_nocheck(void *to, const void *from, #if 0 -#error don't use - these macros don't increment to & from pointers +#error "don't use - these macros don't increment to & from pointers" /* Optimize just a little bit when we know the size of the move. */ #define __constant_copy_user(to, from, size) \ do { \ diff --git a/arch/mn10300/kernel/Makefile b/arch/mn10300/kernel/Makefile index 9902235..5b41192 100644 --- a/arch/mn10300/kernel/Makefile +++ b/arch/mn10300/kernel/Makefile @@ -10,8 +10,9 @@ obj-y := process.o signal.o entry.o traps.o irq.o \ ptrace.o setup.o time.o sys_mn10300.o io.o kthread.o \ switch_to.o mn10300_ksyms.o kernel_execve.o $(fpu-obj-y) -obj-$(CONFIG_MN10300_WD_TIMER) += mn10300-watchdog.o mn10300-watchdog-low.o +obj-$(CONFIG_SMP) += smp.o smp-low.o +obj-$(CONFIG_MN10300_WD_TIMER) += mn10300-watchdog.o mn10300-watchdog-low.o obj-$(CONFIG_MN10300_TTYSM) += mn10300-serial.o mn10300-serial-low.o \ mn10300-debug.o diff --git a/arch/mn10300/kernel/asm-offsets.c b/arch/mn10300/kernel/asm-offsets.c index 78e290e..54cc5b6 100644 --- a/arch/mn10300/kernel/asm-offsets.c +++ b/arch/mn10300/kernel/asm-offsets.c @@ -66,7 +66,7 @@ void foo(void) OFFSET(THREAD_SP, thread_struct, sp); OFFSET(THREAD_A3, thread_struct, a3); OFFSET(THREAD_USP, thread_struct, usp); - OFFSET(THREAD_FRAME, thread_struct, __frame); + OFFSET(THREAD_FRAME, thread_struct, frame); #ifdef CONFIG_FPU OFFSET(THREAD_FPU_FLAGS, thread_struct, fpu_flags); OFFSET(THREAD_FPU_STATE, thread_struct, fpu_state); diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S index 355f681..f00b9ba 100644 --- a/arch/mn10300/kernel/entry.S +++ b/arch/mn10300/kernel/entry.S @@ -28,25 +28,17 @@ #include <asm/asm-offsets.h> #include <asm/frame.inc> +#if defined(CONFIG_SMP) && defined(CONFIG_GDBSTUB) +#include <asm/gdb-stub.h> +#endif /* CONFIG_SMP && CONFIG_GDBSTUB */ + #ifdef CONFIG_PREEMPT -#define preempt_stop __cli +#define preempt_stop LOCAL_IRQ_DISABLE #else #define preempt_stop #define resume_kernel restore_all #endif - .macro __cli - and ~EPSW_IM,epsw - or EPSW_IE|MN10300_CLI_LEVEL,epsw - nop - nop - nop - .endm - .macro __sti - or EPSW_IE|EPSW_IM_7,epsw - .endm - - .am33_2 ############################################################################### @@ -88,7 +80,7 @@ syscall_call: syscall_exit: # make sure we don't miss an interrupt setting need_resched or # sigpending between sampling and the rti - __cli + LOCAL_IRQ_DISABLE mov (TI_flags,a2),d2 btst _TIF_ALLWORK_MASK,d2 bne syscall_exit_work @@ -105,7 +97,7 @@ restore_all: syscall_exit_work: btst _TIF_SYSCALL_TRACE,d2 beq work_pending - __sti # could let syscall_trace_exit() call + LOCAL_IRQ_ENABLE # could let syscall_trace_exit() call # schedule() instead mov fp,d0 call syscall_trace_exit[],0 # do_syscall_trace(regs) @@ -121,7 +113,7 @@ work_resched: # make sure we don't miss an interrupt setting need_resched or # sigpending between sampling and the rti - __cli + LOCAL_IRQ_DISABLE # is there any work to be done other than syscall tracing? mov (TI_flags,a2),d2 @@ -168,7 +160,7 @@ ret_from_intr: ENTRY(resume_userspace) # make sure we don't miss an interrupt setting need_resched or # sigpending between sampling and the rti - __cli + LOCAL_IRQ_DISABLE # is there any work to be done on int/exception return? mov (TI_flags,a2),d2 @@ -178,7 +170,7 @@ ENTRY(resume_userspace) #ifdef CONFIG_PREEMPT ENTRY(resume_kernel) - __cli + LOCAL_IRQ_DISABLE mov (TI_preempt_count,a2),d0 # non-zero preempt_count ? cmp 0,d0 bne restore_all @@ -281,6 +273,79 @@ ENTRY(nmi_handler) add -4,sp mov d0,(sp) mov (TBR),d0 + +#ifdef CONFIG_SMP + add -4,sp + mov d0,(sp) # save d0(TBR) + movhu (NMIAGR),d0 + and NMIAGR_GN,d0 + lsr 0x2,d0 + cmp CALL_FUNCTION_NMI_IPI,d0 + bne 5f # if not call function, jump + + # function call nmi ipi + add 4,sp # no need to store TBR + mov GxICR_DETECT,d0 # clear NMI request + movbu d0,(GxICR(CALL_FUNCTION_NMI_IPI)) + movhu (GxICR(CALL_FUNCTION_NMI_IPI)),d0 + and ~EPSW_NMID,epsw # enable NMI + + mov (sp),d0 # restore d0 + SAVE_ALL + call smp_nmi_call_function_interrupt[],0 + RESTORE_ALL + +5: +#ifdef CONFIG_GDBSTUB + cmp GDB_NMI_IPI,d0 + bne 3f # if not gdb nmi ipi, jump + + # gdb nmi ipi + add 4,sp # no need to store TBR + mov GxICR_DETECT,d0 # clear NMI + movbu d0,(GxICR(GDB_NMI_IPI)) + movhu (GxICR(GDB_NMI_IPI)),d0 + and ~EPSW_NMID,epsw # enable NMI +#ifdef CONFIG_MN10300_CACHE_ENABLED + mov (gdbstub_nmi_opr_type),d0 + cmp GDBSTUB_NMI_CACHE_PURGE,d0 + bne 4f # if not gdb cache purge, jump + + # gdb cache purge nmi ipi + add -20,sp + mov d1,(4,sp) + mov a0,(8,sp) + mov a1,(12,sp) + mov mdr,d0 + mov d0,(16,sp) + call gdbstub_local_purge_cache[],0 + mov 0x1,d0 + mov (CPUID),d1 + asl d1,d0 + mov gdbstub_nmi_cpumask,a0 + bclr d0,(a0) + mov (4,sp),d1 + mov (8,sp),a0 + mov (12,sp),a1 + mov (16,sp),d0 + mov d0,mdr + add 20,sp + mov (sp),d0 + add 4,sp + rti +4: +#endif /* CONFIG_MN10300_CACHE_ENABLED */ + # gdb wait nmi ipi + mov (sp),d0 + SAVE_ALL + call gdbstub_nmi_wait[],0 + RESTORE_ALL +3: +#endif /* CONFIG_GDBSTUB */ + mov (sp),d0 # restore TBR to d0 + add 4,sp +#endif /* CONFIG_SMP */ + bra __common_exception_nonmi ENTRY(__common_exception) @@ -314,15 +379,21 @@ __common_exception_nonmi: mov d0,(REG_ORIG_D0,fp) #ifdef CONFIG_GDBSTUB +#ifdef CONFIG_SMP + call gdbstub_busy_check[],0 + and d0,d0 # check return value + beq 2f +#else /* CONFIG_SMP */ btst 0x01,(gdbstub_busy) beq 2f +#endif /* CONFIG_SMP */ and ~EPSW_IE,epsw mov fp,d0 mov a2,d1 call gdbstub_exception[],0 # gdbstub itself caused an exception bra restore_all 2: -#endif +#endif /* CONFIG_GDBSTUB */ mov fp,d0 # arg 0: stacked register file mov a2,d1 # arg 1: exception number @@ -357,11 +428,7 @@ ENTRY(set_excp_vector) add exception_table,d0 mov d1,(d0) mov 4,d1 -#if defined(CONFIG_MN10300_CACHE_WBACK) - jmp mn10300_dcache_flush_inv_range2 -#else ret [],0 -#endif ############################################################################### # diff --git a/arch/mn10300/kernel/gdb-io-serial-low.S b/arch/mn10300/kernel/gdb-io-serial-low.S index 4998b24f..b1d0152 100644 --- a/arch/mn10300/kernel/gdb-io-serial-low.S +++ b/arch/mn10300/kernel/gdb-io-serial-low.S @@ -18,6 +18,7 @@ #include <asm/thread_info.h> #include <asm/frame.inc> #include <asm/intctl-regs.h> +#include <asm/irqflags.h> #include <unit/serial.h> .text @@ -69,7 +70,7 @@ gdbstub_io_rx_overflow: bra gdbstub_io_rx_done gdbstub_io_rx_enter: - or EPSW_IE|EPSW_IM_1,epsw + LOCAL_CHANGE_INTR_MASK_LEVEL(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL+1)) add -4,sp SAVE_ALL @@ -80,7 +81,7 @@ gdbstub_io_rx_enter: mov fp,d0 call gdbstub_rx_irq[],0 # gdbstub_rx_irq(regs,excep) - and ~EPSW_IE,epsw + LOCAL_CLI bclr 0x01,(gdbstub_busy) .globl gdbstub_return diff --git a/arch/mn10300/kernel/gdb-io-serial.c b/arch/mn10300/kernel/gdb-io-serial.c index ae663dc..0d5d63c 100644 --- a/arch/mn10300/kernel/gdb-io-serial.c +++ b/arch/mn10300/kernel/gdb-io-serial.c @@ -23,6 +23,7 @@ #include <asm/exceptions.h> #include <asm/serial-regs.h> #include <unit/serial.h> +#include <asm/smp.h> /* * initialise the GDB stub @@ -45,22 +46,34 @@ void gdbstub_io_init(void) XIRQxICR(GDBPORT_SERIAL_IRQ) = 0; tmp = XIRQxICR(GDBPORT_SERIAL_IRQ); +#if CONFIG_GDBSTUB_IRQ_LEVEL == 0 IVAR0 = EXCEP_IRQ_LEVEL0; - set_intr_stub(EXCEP_IRQ_LEVEL0, gdbstub_io_rx_handler); +#elif CONFIG_GDBSTUB_IRQ_LEVEL == 1 + IVAR1 = EXCEP_IRQ_LEVEL1; +#elif CONFIG_GDBSTUB_IRQ_LEVEL == 2 + IVAR2 = EXCEP_IRQ_LEVEL2; +#elif CONFIG_GDBSTUB_IRQ_LEVEL == 3 + IVAR3 = EXCEP_IRQ_LEVEL3; +#elif CONFIG_GDBSTUB_IRQ_LEVEL == 4 + IVAR4 = EXCEP_IRQ_LEVEL4; +#elif CONFIG_GDBSTUB_IRQ_LEVEL == 5 + IVAR5 = EXCEP_IRQ_LEVEL5; +#else +#error "Unknown irq level for gdbstub." +#endif + + set_intr_stub(NUM2EXCEP_IRQ_LEVEL(CONFIG_GDBSTUB_IRQ_LEVEL), + gdbstub_io_rx_handler); XIRQxICR(GDBPORT_SERIAL_IRQ) &= ~GxICR_REQUEST; - XIRQxICR(GDBPORT_SERIAL_IRQ) = GxICR_ENABLE | GxICR_LEVEL_0; + XIRQxICR(GDBPORT_SERIAL_IRQ) = + GxICR_ENABLE | NUM2GxICR_LEVEL(CONFIG_GDBSTUB_IRQ_LEVEL); tmp = XIRQxICR(GDBPORT_SERIAL_IRQ); GDBPORT_SERIAL_IER = UART_IER_RDI | UART_IER_RLSI; /* permit level 0 IRQs to take place */ - asm volatile( - " and %0,epsw \n" - " or %1,epsw \n" - : - : "i"(~EPSW_IM), "i"(EPSW_IE | EPSW_IM_1) - ); + local_change_intr_mask_level(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1)); } /* @@ -87,6 +100,9 @@ int gdbstub_io_rx_char(unsigned char *_ch, int nonblock) { unsigned ix; u8 ch, st; +#if defined(CONFIG_MN10300_WD_TIMER) + int cpu; +#endif *_ch = 0xff; @@ -104,8 +120,9 @@ int gdbstub_io_rx_char(unsigned char *_ch, int nonblock) if (nonblock) return -EAGAIN; #ifdef CONFIG_MN10300_WD_TIMER - watchdog_alert_counter = 0; -#endif /* CONFIG_MN10300_WD_TIMER */ + for (cpu = 0; cpu < NR_CPUS; cpu++) + watchdog_alert_counter[cpu] = 0; +#endif goto try_again; } diff --git a/arch/mn10300/kernel/gdb-io-ttysm.c b/arch/mn10300/kernel/gdb-io-ttysm.c index a560bbc..97dfda2 100644 --- a/arch/mn10300/kernel/gdb-io-ttysm.c +++ b/arch/mn10300/kernel/gdb-io-ttysm.c @@ -58,9 +58,12 @@ void __init gdbstub_io_init(void) gdbstub_io_set_baud(115200); /* we want to get serial receive interrupts */ - set_intr_level(gdbstub_port->rx_irq, GxICR_LEVEL_0); - set_intr_level(gdbstub_port->tx_irq, GxICR_LEVEL_0); - set_intr_stub(EXCEP_IRQ_LEVEL0, gdbstub_io_rx_handler); + set_intr_level(gdbstub_port->rx_irq, + NUM2GxICR_LEVEL(CONFIG_GDBSTUB_IRQ_LEVEL)); + set_intr_level(gdbstub_port->tx_irq, + NUM2GxICR_LEVEL(CONFIG_GDBSTUB_IRQ_LEVEL)); + set_intr_stub(NUM2EXCEP_IRQ_LEVEL(CONFIG_GDBSTUB_IRQ_LEVEL), + gdbstub_io_rx_handler); *gdbstub_port->rx_icr |= GxICR_ENABLE; tmp = *gdbstub_port->rx_icr; @@ -84,12 +87,7 @@ void __init gdbstub_io_init(void) tmp = *gdbstub_port->_control; /* permit level 0 IRQs only */ - asm volatile( - " and %0,epsw \n" - " or %1,epsw \n" - : - : "i"(~EPSW_IM), "i"(EPSW_IE|EPSW_IM_1) - ); + local_change_intr_mask_level(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1)); } /* @@ -184,6 +182,9 @@ int gdbstub_io_rx_char(unsigned char *_ch, int nonblock) { unsigned ix; u8 ch, st; +#if defined(CONFIG_MN10300_WD_TIMER) + int cpu; +#endif *_ch = 0xff; @@ -201,8 +202,9 @@ try_again: if (nonblock) return -EAGAIN; #ifdef CONFIG_MN10300_WD_TIMER - watchdog_alert_counter = 0; -#endif /* CONFIG_MN10300_WD_TIMER */ + for (cpu = 0; cpu < NR_CPUS; cpu++) + watchdog_alert_counter[cpu] = 0; +#endif goto try_again; } diff --git a/arch/mn10300/kernel/gdb-stub.c b/arch/mn10300/kernel/gdb-stub.c index 41b1170..a5fc3f0 100644 --- a/arch/mn10300/kernel/gdb-stub.c +++ b/arch/mn10300/kernel/gdb-stub.c @@ -440,15 +440,11 @@ static const unsigned char gdbstub_insn_sizes[256] = static int __gdbstub_mark_bp(u8 *addr, int ix) { - if (addr < (u8 *) 0x70000000UL) - return 0; - /* 70000000-7fffffff: vmalloc area */ - if (addr < (u8 *) 0x80000000UL) + /* vmalloc area */ + if (((u8 *) VMALLOC_START <= addr) && (addr < (u8 *) VMALLOC_END)) goto okay; - if (addr < (u8 *) 0x8c000000UL) - return 0; - /* 8c000000-93ffffff: SRAM, SDRAM */ - if (addr < (u8 *) 0x94000000UL) + /* SRAM, SDRAM */ + if (((u8 *) 0x80000000UL <= addr) && (addr < (u8 *) 0xa0000000UL)) goto okay; return 0; @@ -1197,9 +1193,8 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep) mn10300_set_gdbleds(1); asm volatile("mov mdr,%0" : "=d"(mdr)); - asm volatile("mov epsw,%0" : "=d"(epsw)); - asm volatile("mov %0,epsw" - :: "d"((epsw & ~EPSW_IM) | EPSW_IE | EPSW_IM_1)); + local_save_flags(epsw); + local_change_intr_mask_level(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1)); gdbstub_store_fpu(); diff --git a/arch/mn10300/kernel/head.S b/arch/mn10300/kernel/head.S index a81e34f..73e00fc 100644 --- a/arch/mn10300/kernel/head.S +++ b/arch/mn10300/kernel/head.S @@ -19,6 +19,12 @@ #include <asm/frame.inc> #include <asm/param.h> #include <unit/serial.h> +#ifdef CONFIG_SMP +#include <asm/smp.h> +#include <asm/intctl-regs.h> +#include <asm/cpu-regs.h> +#include <proc/smp-regs.h> +#endif /* CONFIG_SMP */ __HEAD @@ -30,17 +36,51 @@ .globl _start .type _start,@function _start: +#ifdef CONFIG_SMP + # + # If this is a secondary CPU (AP), then deal with that elsewhere + # + mov (CPUID),d3 + and CPUID_MASK,d3 + bne startup_secondary + + # + # We're dealing with the primary CPU (BP) here, then. + # Keep BP's D0,D1,D2 register for boot check. + # + + # Set up the Boot IPI for each secondary CPU + mov 0x1,a0 +loop_set_secondary_icr: + mov a0,a1 + asl CROSS_ICR_CPU_SHIFT,a1 + add CROSS_GxICR(SMP_BOOT_IRQ,0),a1 + movhu (a1),d3 + or GxICR_ENABLE|GxICR_LEVEL_0,d3 + movhu d3,(a1) + movhu (a1),d3 # flush + inc a0 + cmp NR_CPUS,a0 + bne loop_set_secondary_icr +#endif /* CONFIG_SMP */ + # save commandline pointer mov d0,a3 # preload the PGD pointer register mov swapper_pg_dir,d0 mov d0,(PTBR) + clr d0 + movbu d0,(PIDR) # turn on the TLBs mov MMUCTR_IIV|MMUCTR_DIV,d0 mov d0,(MMUCTR) +#ifdef CONFIG_AM34_2 + mov MMUCTR_ITE|MMUCTR_DTE|MMUCTR_CE|MMUCTR_WTE,d0 +#else mov MMUCTR_ITE|MMUCTR_DTE|MMUCTR_CE,d0 +#endif mov d0,(MMUCTR) # turn on AM33v2 exception handling mode and set the trap table base @@ -51,6 +91,11 @@ _start: mov d0,(TBR) # invalidate and enable both of the caches +#ifdef CONFIG_SMP + mov ECHCTR,a0 + clr d0 + mov d0,(a0) +#endif mov CHCTR,a0 clr d0 movhu d0,(a0) # turn off first @@ -206,6 +251,44 @@ __no_parameters: call processor_init[],0 call unit_init[],0 +#ifdef CONFIG_SMP + # mark the primary CPU in cpu_boot_map + mov cpu_boot_map,a0 + mov 0x1,d0 + mov d0,(a0) + + # signal each secondary CPU to begin booting + mov 0x1,d2 # CPU ID + +loop_request_boot_secondary: + mov d2,a0 + # send SMP_BOOT_IPI to secondary CPU + asl CROSS_ICR_CPU_SHIFT,a0 + add CROSS_GxICR(SMP_BOOT_IRQ,0),a0 + movhu (a0),d0 + or GxICR_REQUEST|GxICR_DETECT,d0 + movhu d0,(a0) + movhu (a0),d0 # flush + + # wait up to 100ms for AP's IPI to be received + clr d3 +wait_on_secondary_boot: + mov DELAY_TIME_BOOT_IPI,d0 + call __delay[],0 + inc d3 + mov cpu_boot_map,a0 + mov (a0),d0 + lsr d2,d0 + btst 0x1,d0 + bne 1f + cmp TIME_OUT_COUNT_BOOT_IPI,d3 + bne wait_on_secondary_boot +1: + inc d2 + cmp NR_CPUS,d2 + bne loop_request_boot_secondary +#endif /* CONFIG_SMP */ + #ifdef CONFIG_GDBSTUB call gdbstub_init[],0 @@ -217,7 +300,118 @@ __gdbstub_pause: #endif jmp start_kernel - .size _start, _start-. + .size _start,.-_start + +############################################################################### +# +# Secondary CPU boot point +# +############################################################################### +#ifdef CONFIG_SMP +startup_secondary: + # preload the PGD pointer register + mov swapper_pg_dir,d0 + mov d0,(PTBR) + clr d0 + movbu d0,(PIDR) + + # turn on the TLBs + mov MMUCTR_IIV|MMUCTR_DIV,d0 + mov d0,(MMUCTR) +#ifdef CONFIG_AM34_2 + mov MMUCTR_ITE|MMUCTR_DTE|MMUCTR_CE|MMUCTR_WTE,d0 +#else + mov MMUCTR_ITE|MMUCTR_DTE|MMUCTR_CE,d0 +#endif + mov d0,(MMUCTR) + + # turn on AM33v2 exception handling mode and set the trap table base + movhu (CPUP),d0 + or CPUP_EXM_AM33V2,d0 + movhu d0,(CPUP) + + # set the interrupt vector table + mov CONFIG_INTERRUPT_VECTOR_BASE,d0 + mov d0,(TBR) + + # invalidate and enable both of the caches + mov ECHCTR,a0 + clr d0 + mov d0,(a0) + mov CHCTR,a0 + clr d0 + movhu d0,(a0) # turn off first + mov CHCTR_ICINV|CHCTR_DCINV,d0 + movhu d0,(a0) + setlb + mov (a0),d0 + btst CHCTR_ICBUSY|CHCTR_DCBUSY,d0 # wait till not busy (use CPU loop buffer) + lne + +#ifdef CONFIG_MN10300_CACHE_ENABLED +#ifdef CONFIG_MN10300_CACHE_WBACK +#ifndef CONFIG_MN10300_CACHE_WBACK_NOWRALLOC + mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK,d0 +#else + mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK|CHCTR_DCALMD,d0 +#endif /* !NOWRALLOC */ +#else + mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRTHROUGH,d0 +#endif /* WBACK */ + movhu d0,(a0) # enable +#endif /* ENABLED */ + + # Clear the boot IPI interrupt for this CPU + movhu (GxICR(SMP_BOOT_IRQ)),d0 + and ~GxICR_REQUEST,d0 + movhu d0,(GxICR(SMP_BOOT_IRQ)) + movhu (GxICR(SMP_BOOT_IRQ)),d0 # flush + + /* get stack */ + mov CONFIG_INTERRUPT_VECTOR_BASE + CONFIG_BOOT_STACK_OFFSET,a0 + mov (CPUID),d0 + and CPUID_MASK,d0 + mulu CONFIG_BOOT_STACK_SIZE,d0 + sub d0,a0 + mov a0,sp + + # init interrupt for AP + call smp_prepare_cpu_init[],0 + + # mark this secondary CPU in cpu_boot_map + mov (CPUID),d0 + mov 0x1,d1 + asl d0,d1 + mov cpu_boot_map,a0 + bset d1,(a0) + + or EPSW_IE|EPSW_IM_1,epsw # permit level 0 interrupts + nop + nop +#ifdef CONFIG_MN10300_CACHE_WBACK + # flush the local cache if it's in writeback mode + call mn10300_local_dcache_flush_inv[],0 + setlb + mov (CHCTR),d0 + btst CHCTR_DCBUSY,d0 # wait till not busy (use CPU loop buffer) + lne +#endif + + # now sleep waiting for further instructions +secondary_sleep: + mov CPUM_SLEEP,d0 + movhu d0,(CPUM) + nop + nop + bra secondary_sleep + .size startup_secondary,.-startup_secondary +#endif /* CONFIG_SMP */ + +############################################################################### +# +# +# +############################################################################### ENTRY(__head_end) /* diff --git a/arch/mn10300/kernel/internal.h b/arch/mn10300/kernel/internal.h index eee2eee..3b1f48b 100644 --- a/arch/mn10300/kernel/internal.h +++ b/arch/mn10300/kernel/internal.h @@ -18,3 +18,15 @@ extern int kernel_thread_helper(int); * entry.S */ extern void ret_from_fork(struct task_struct *) __attribute__((noreturn)); + +/* + * smp-low.S + */ +#ifdef CONFIG_SMP +extern void mn10300_low_ipi_handler(void); +#endif + +/* + * time.c + */ +extern irqreturn_t local_timer_interrupt(void); diff --git a/arch/mn10300/kernel/irq.c b/arch/mn10300/kernel/irq.c index b5b970d..80f1572 100644 --- a/arch/mn10300/kernel/irq.c +++ b/arch/mn10300/kernel/irq.c @@ -12,11 +12,34 @@ #include <linux/interrupt.h> #include <linux/kernel_stat.h> #include <linux/seq_file.h> +#include <linux/cpumask.h> #include <asm/setup.h> +#include <asm/serial-regs.h> -unsigned long __mn10300_irq_enabled_epsw = EPSW_IE | EPSW_IM_7; +#ifdef CONFIG_SMP +#undef GxICR +#define GxICR(X) CROSS_GxICR(X, irq_affinity_online[X]) + +#undef GxICR_u8 +#define GxICR_u8(X) CROSS_GxICR_u8(X, irq_affinity_online[X]) +#endif /* CONFIG_SMP */ + +unsigned long __mn10300_irq_enabled_epsw[NR_CPUS] __cacheline_aligned_in_smp = { + [0 ... NR_CPUS - 1] = EPSW_IE | EPSW_IM_7 +}; EXPORT_SYMBOL(__mn10300_irq_enabled_epsw); +#ifdef CONFIG_SMP +static char irq_affinity_online[NR_IRQS] = { + [0 ... NR_IRQS - 1] = 0 +}; + +#define NR_IRQ_WORDS ((NR_IRQS + 31) / 32) +static unsigned long irq_affinity_request[NR_IRQ_WORDS] = { + [0 ... NR_IRQ_WORDS - 1] = 0 +}; +#endif /* CONFIG_SMP */ + atomic_t irq_err_count; /* @@ -24,30 +47,65 @@ atomic_t irq_err_count; */ static void mn10300_cpupic_ack(unsigned int irq) { + unsigned long flags; + u16 tmp; + + flags = arch_local_cli_save(); + GxICR_u8(irq) = GxICR_DETECT; + tmp = GxICR(irq); + arch_local_irq_restore(flags); +} + +static void __mask_and_set_icr(unsigned int irq, + unsigned int mask, unsigned int set) +{ + unsigned long flags; u16 tmp; - *(volatile u8 *) &GxICR(irq) = GxICR_DETECT; + + flags = arch_local_cli_save(); tmp = GxICR(irq); + GxICR(irq) = (tmp & mask) | set; + tmp = GxICR(irq); + arch_local_irq_restore(flags); } static void mn10300_cpupic_mask(unsigned int irq) { - u16 tmp = GxICR(irq); - GxICR(irq) = (tmp & GxICR_LEVEL); - tmp = GxICR(irq); + __mask_and_set_icr(irq, GxICR_LEVEL, 0); } static void mn10300_cpupic_mask_ack(unsigned int irq) { - u16 tmp = GxICR(irq); - GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_DETECT; - tmp = GxICR(irq); +#ifdef CONFIG_SMP + unsigned long flags; + u16 tmp; + + flags = arch_local_cli_save(); + + if (!test_and_clear_bit(irq, irq_affinity_request)) { + tmp = GxICR(irq); + GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_DETECT; + tmp = GxICR(irq); + } else { + u16 tmp2; + tmp = GxICR(irq); + GxICR(irq) = (tmp & GxICR_LEVEL); + tmp2 = GxICR(irq); + + irq_affinity_online[irq] = any_online_cpu(*irq_desc[irq].affinity); + GxICR(irq) = (tmp & (GxICR_LEVEL | GxICR_ENABLE)) | GxICR_DETECT; + tmp = GxICR(irq); + } + + arch_local_irq_restore(flags); +#else /* CONFIG_SMP */ + __mask_and_set_icr(irq, GxICR_LEVEL, GxICR_DETECT); +#endif /* CONFIG_SMP */ } static void mn10300_cpupic_unmask(unsigned int irq) { - u16 tmp = GxICR(irq); - GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE; - tmp = GxICR(irq); + __mask_and_set_icr(irq, GxICR_LEVEL, GxICR_ENABLE); } static void mn10300_cpupic_unmask_clear(unsigned int irq) @@ -56,11 +114,89 @@ static void mn10300_cpupic_unmask_clear(unsigned int irq) * device has ceased to assert its interrupt line and the interrupt * channel has been disabled in the PIC, so for level-triggered * interrupts we need to clear the request bit when we re-enable */ - u16 tmp = GxICR(irq); - GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE | GxICR_DETECT; - tmp = GxICR(irq); +#ifdef CONFIG_SMP + unsigned long flags; + u16 tmp; + + flags = arch_local_cli_save(); + + if (!test_and_clear_bit(irq, irq_affinity_request)) { + tmp = GxICR(irq); + GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE | GxICR_DETECT; + tmp = GxICR(irq); + } else { + tmp = GxICR(irq); + + irq_affinity_online[irq] = any_online_cpu(*irq_desc[irq].affinity); + GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE | GxICR_DETECT; + tmp = GxICR(irq); + } + + arch_local_irq_restore(flags); +#else /* CONFIG_SMP */ + __mask_and_set_icr(irq, GxICR_LEVEL, GxICR_ENABLE | GxICR_DETECT); +#endif /* CONFIG_SMP */ } +#ifdef CONFIG_SMP +static int +mn10300_cpupic_setaffinity(unsigned int irq, const struct cpumask *mask) +{ + unsigned long flags; + int err; + + flags = arch_local_cli_save(); + + /* check irq no */ + switch (irq) { + case TMJCIRQ: + case RESCHEDULE_IPI: + case CALL_FUNC_SINGLE_IPI: + case LOCAL_TIMER_IPI: + case FLUSH_CACHE_IPI: + case CALL_FUNCTION_NMI_IPI: + case GDB_NMI_IPI: +#ifdef CONFIG_MN10300_TTYSM0 + case SC0RXIRQ: + case SC0TXIRQ: +#ifdef CONFIG_MN10300_TTYSM0_TIMER8 + case TM8IRQ: +#elif CONFIG_MN10300_TTYSM0_TIMER2 + case TM2IRQ: +#endif /* CONFIG_MN10300_TTYSM0_TIMER8 */ +#endif /* CONFIG_MN10300_TTYSM0 */ + +#ifdef CONFIG_MN10300_TTYSM1 + case SC1RXIRQ: + case SC1TXIRQ: +#ifdef CONFIG_MN10300_TTYSM1_TIMER12 + case TM12IRQ: +#elif CONFIG_MN10300_TTYSM1_TIMER9 + case TM9IRQ: +#elif CONFIG_MN10300_TTYSM1_TIMER3 + case TM3IRQ: +#endif /* CONFIG_MN10300_TTYSM1_TIMER12 */ +#endif /* CONFIG_MN10300_TTYSM1 */ + +#ifdef CONFIG_MN10300_TTYSM2 + case SC2RXIRQ: + case SC2TXIRQ: + case TM10IRQ: +#endif /* CONFIG_MN10300_TTYSM2 */ + err = -1; + break; + + default: + set_bit(irq, irq_affinity_request); + err = 0; + break; + } + + arch_local_irq_restore(flags); + return err; +} +#endif /* CONFIG_SMP */ + /* * MN10300 PIC level-triggered IRQ handling. * @@ -79,6 +215,9 @@ static struct irq_chip mn10300_cpu_pic_level = { .mask = mn10300_cpupic_mask, .mask_ack = mn10300_cpupic_mask, .unmask = mn10300_cpupic_unmask_clear, +#ifdef CONFIG_SMP + .set_affinity = mn10300_cpupic_setaffinity, +#endif /* CONFIG_SMP */ }; /* @@ -94,6 +233,9 @@ static struct irq_chip mn10300_cpu_pic_edge = { .mask = mn10300_cpupic_mask, .mask_ack = mn10300_cpupic_mask_ack, .unmask = mn10300_cpupic_unmask, +#ifdef CONFIG_SMP + .set_affinity = mn10300_cpupic_setaffinity, +#endif /* CONFIG_SMP */ }; /* @@ -111,14 +253,34 @@ void ack_bad_irq(int irq) */ void set_intr_level(int irq, u16 level) { - u16 tmp; + BUG_ON(in_interrupt()); - if (in_interrupt()) - BUG(); + __mask_and_set_icr(irq, GxICR_ENABLE, level); +} - tmp = GxICR(irq); - GxICR(irq) = (tmp & GxICR_ENABLE) | level; - tmp = GxICR(irq); +void mn10300_intc_set_level(unsigned int irq, unsigned int level) +{ + set_intr_level(irq, NUM2GxICR_LEVEL(level) & GxICR_LEVEL); +} + +void mn10300_intc_clear(unsigned int irq) +{ + __mask_and_set_icr(irq, GxICR_LEVEL | GxICR_ENABLE, GxICR_DETECT); +} + +void mn10300_intc_set(unsigned int irq) +{ + __mask_and_set_icr(irq, 0, GxICR_REQUEST | GxICR_DETECT); +} + +void mn10300_intc_enable(unsigned int irq) +{ + mn10300_cpupic_unmask(irq); +} + +void mn10300_intc_disable(unsigned int irq) +{ + mn10300_cpupic_mask(irq); } /* @@ -126,7 +288,7 @@ void set_intr_level(int irq, u16 level) * than before * - see Documentation/mn10300/features.txt */ -void set_intr_postackable(int irq) +void mn10300_set_lateack_irq_type(int irq) { set_irq_chip_and_handler(irq, &mn10300_cpu_pic_level, handle_level_irq); @@ -147,6 +309,7 @@ void __init init_IRQ(void) * interrupts */ set_irq_chip_and_handler(irq, &mn10300_cpu_pic_edge, handle_level_irq); + unit_init_IRQ(); } @@ -156,6 +319,7 @@ void __init init_IRQ(void) asmlinkage void do_IRQ(void) { unsigned long sp, epsw, irq_disabled_epsw, old_irq_enabled_epsw; + unsigned int cpu_id = smp_processor_id(); int irq; sp = current_stack_pointer(); @@ -163,12 +327,14 @@ asmlinkage void do_IRQ(void) /* make sure local_irq_enable() doesn't muck up the interrupt priority * setting in EPSW */ - old_irq_enabled_epsw = __mn10300_irq_enabled_epsw; + old_irq_enabled_epsw = __mn10300_irq_enabled_epsw[cpu_id]; local_save_flags(epsw); - __mn10300_irq_enabled_epsw = EPSW_IE | (EPSW_IM & epsw); + __mn10300_irq_enabled_epsw[cpu_id] = EPSW_IE | (EPSW_IM & epsw); irq_disabled_epsw = EPSW_IE | MN10300_CLI_LEVEL; - __IRQ_STAT(smp_processor_id(), __irq_count)++; +#ifdef CONFIG_MN10300_WD_TIMER + __IRQ_STAT(cpu_id, __irq_count)++; +#endif irq_enter(); @@ -188,7 +354,7 @@ asmlinkage void do_IRQ(void) local_irq_restore(epsw); } - __mn10300_irq_enabled_epsw = old_irq_enabled_epsw; + __mn10300_irq_enabled_epsw[cpu_id] = old_irq_enabled_epsw; irq_exit(); } @@ -239,11 +405,13 @@ int show_interrupts(struct seq_file *p, void *v) /* polish off with NMI and error counters */ case NR_IRQS: +#ifdef CONFIG_MN10300_WD_TIMER seq_printf(p, "NMI: "); for (j = 0; j < NR_CPUS; j++) if (cpu_online(j)) seq_printf(p, "%10u ", nmi_count(j)); seq_putc(p, '\n'); +#endif seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count)); break; @@ -251,3 +419,51 @@ int show_interrupts(struct seq_file *p, void *v) return 0; } + +#ifdef CONFIG_HOTPLUG_CPU +void migrate_irqs(void) +{ + irq_desc_t *desc; + int irq; + unsigned int self, new; + unsigned long flags; + + self = smp_processor_id(); + for (irq = 0; irq < NR_IRQS; irq++) { + desc = irq_desc + irq; + + if (desc->status == IRQ_PER_CPU) + continue; + + if (cpu_isset(self, irq_desc[irq].affinity) && + !cpus_intersects(irq_affinity[irq], cpu_online_map)) { + int cpu_id; + cpu_id = first_cpu(cpu_online_map); + cpu_set(cpu_id, irq_desc[irq].affinity); + } + /* We need to operate irq_affinity_online atomically. */ + arch_local_cli_save(flags); + if (irq_affinity_online[irq] == self) { + u16 x, tmp; + + x = CROSS_GxICR(irq, self); + CROSS_GxICR(irq, self) = x & GxICR_LEVEL; + tmp = CROSS_GxICR(irq, self); + + new = any_online_cpu(irq_desc[irq].affinity); + irq_affinity_online[irq] = new; + + CROSS_GxICR(irq, new) = + (x & GxICR_LEVEL) | GxICR_DETECT; + tmp = CROSS_GxICR(irq, new); + + x &= GxICR_LEVEL | GxICR_ENABLE; + if (CROSS_GxICR(irq, self) & GxICR_REQUEST) + x |= GxICR_REQUEST | GxICR_DETECT; + CROSS_GxICR(irq, new) = x; + tmp = CROSS_GxICR(irq, new); + } + arch_local_irq_restore(flags); + } +} +#endif /* CONFIG_HOTPLUG_CPU */ diff --git a/arch/mn10300/kernel/mn10300-serial-low.S b/arch/mn10300/kernel/mn10300-serial-low.S index 66702d2..dfc1b6f 100644 --- a/arch/mn10300/kernel/mn10300-serial-low.S +++ b/arch/mn10300/kernel/mn10300-serial-low.S @@ -39,7 +39,7 @@ ############################################################################### .balign L1_CACHE_BYTES ENTRY(mn10300_serial_vdma_interrupt) - or EPSW_IE,psw # permit overriding by +# or EPSW_IE,psw # permit overriding by # debugging interrupts movm [d2,d3,a2,a3,exreg0],(sp) @@ -164,7 +164,7 @@ mnsc_vdma_tx_noint: rti mnsc_vdma_tx_empty: - mov +(GxICR_LEVEL_1|GxICR_DETECT),d2 + mov +(NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL)|GxICR_DETECT),d2 movhu d2,(e3) # disable the interrupt movhu (e3),d2 # flush @@ -175,7 +175,7 @@ mnsc_vdma_tx_break: movhu (SCxCTR,e2),d2 # turn on break mode or SC01CTR_BKE,d2 movhu d2,(SCxCTR,e2) - mov +(GxICR_LEVEL_1|GxICR_DETECT),d2 + mov +(NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL)|GxICR_DETECT),d2 movhu d2,(e3) # disable transmit interrupts on this # channel movhu (e3),d2 # flush diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c index db509dd..996384d 100644 --- a/arch/mn10300/kernel/mn10300-serial.c +++ b/arch/mn10300/kernel/mn10300-serial.c @@ -44,6 +44,11 @@ static const char serial_revdate[] = "2007-11-06"; #include <unit/timex.h> #include "mn10300-serial.h" +#ifdef CONFIG_SMP +#undef GxICR +#define GxICR(X) CROSS_GxICR(X, 0) +#endif /* CONFIG_SMP */ + #define kenter(FMT, ...) \ printk(KERN_DEBUG "-->%s(" FMT ")\n", __func__, ##__VA_ARGS__) #define _enter(FMT, ...) \ @@ -57,6 +62,11 @@ static const char serial_revdate[] = "2007-11-06"; #define _proto(FMT, ...) \ no_printk(KERN_DEBUG "### MNSERIAL " FMT " ###\n", ##__VA_ARGS__) +#ifndef CODMSB +/* c_cflag bit meaning */ +#define CODMSB 004000000000 /* change Transfer bit-order */ +#endif + #define NR_UARTS 3 #ifdef CONFIG_MN10300_TTYSM_CONSOLE @@ -152,26 +162,35 @@ struct mn10300_serial_port mn10300_serial_port_sif0 = { .name = "ttySM0", ._iobase = &SC0CTR, ._control = &SC0CTR, - ._status = (volatile u8 *) &SC0STR, + ._status = (volatile u8 *)&SC0STR, ._intr = &SC0ICR, ._rxb = &SC0RXB, ._txb = &SC0TXB, .rx_name = "ttySM0:Rx", .tx_name = "ttySM0:Tx", -#ifdef CONFIG_MN10300_TTYSM0_TIMER8 +#if defined(CONFIG_MN10300_TTYSM0_TIMER8) .tm_name = "ttySM0:Timer8", ._tmxmd = &TM8MD, ._tmxbr = &TM8BR, ._tmicr = &TM8ICR, .tm_irq = TM8IRQ, .div_timer = MNSCx_DIV_TIMER_16BIT, -#else /* CONFIG_MN10300_TTYSM0_TIMER2 */ +#elif defined(CONFIG_MN10300_TTYSM0_TIMER0) + .tm_name = "ttySM0:Timer0", + ._tmxmd = &TM0MD, + ._tmxbr = (volatile u16 *)&TM0BR, + ._tmicr = &TM0ICR, + .tm_irq = TM0IRQ, + .div_timer = MNSCx_DIV_TIMER_8BIT, +#elif defined(CONFIG_MN10300_TTYSM0_TIMER2) .tm_name = "ttySM0:Timer2", ._tmxmd = &TM2MD, - ._tmxbr = (volatile u16 *) &TM2BR, + ._tmxbr = (volatile u16 *)&TM2BR, ._tmicr = &TM2ICR, .tm_irq = TM2IRQ, .div_timer = MNSCx_DIV_TIMER_8BIT, +#else +#error "Unknown config for ttySM0" #endif .rx_irq = SC0RXIRQ, .tx_irq = SC0TXIRQ, @@ -205,26 +224,35 @@ struct mn10300_serial_port mn10300_serial_port_sif1 = { .name = "ttySM1", ._iobase = &SC1CTR, ._control = &SC1CTR, - ._status = (volatile u8 *) &SC1STR, + ._status = (volatile u8 *)&SC1STR, ._intr = &SC1ICR, ._rxb = &SC1RXB, ._txb = &SC1TXB, .rx_name = "ttySM1:Rx", .tx_name = "ttySM1:Tx", -#ifdef CONFIG_MN10300_TTYSM1_TIMER9 +#if defined(CONFIG_MN10300_TTYSM1_TIMER9) .tm_name = "ttySM1:Timer9", ._tmxmd = &TM9MD, ._tmxbr = &TM9BR, ._tmicr = &TM9ICR, .tm_irq = TM9IRQ, .div_timer = MNSCx_DIV_TIMER_16BIT, -#else /* CONFIG_MN10300_TTYSM1_TIMER3 */ +#elif defined(CONFIG_MN10300_TTYSM1_TIMER3) .tm_name = "ttySM1:Timer3", ._tmxmd = &TM3MD, - ._tmxbr = (volatile u16 *) &TM3BR, + ._tmxbr = (volatile u16 *)&TM3BR, ._tmicr = &TM3ICR, .tm_irq = TM3IRQ, .div_timer = MNSCx_DIV_TIMER_8BIT, +#elif defined(CONFIG_MN10300_TTYSM1_TIMER12) + .tm_name = "ttySM1/Timer12", + ._tmxmd = &TM12MD, + ._tmxbr = &TM12BR, + ._tmicr = &TM12ICR, + .tm_irq = TM12IRQ, + .div_timer = MNSCx_DIV_TIMER_16BIT, +#else +#error "Unknown config for ttySM1" #endif .rx_irq = SC1RXIRQ, .tx_irq = SC1TXIRQ, @@ -260,20 +288,45 @@ struct mn10300_serial_port mn10300_serial_port_sif2 = { .uart.lock = __SPIN_LOCK_UNLOCKED(mn10300_serial_port_sif2.uart.lock), .name = "ttySM2", - .rx_name = "ttySM2:Rx", - .tx_name = "ttySM2:Tx", - .tm_name = "ttySM2:Timer10", ._iobase = &SC2CTR, ._control = &SC2CTR, - ._status = &SC2STR, + ._status = (volatile u8 *)&SC2STR, ._intr = &SC2ICR, ._rxb = &SC2RXB, ._txb = &SC2TXB, + .rx_name = "ttySM2:Rx", + .tx_name = "ttySM2:Tx", +#if defined(CONFIG_MN10300_TTYSM2_TIMER10) + .tm_name = "ttySM2/Timer10", ._tmxmd = &TM10MD, ._tmxbr = &TM10BR, ._tmicr = &TM10ICR, .tm_irq = TM10IRQ, .div_timer = MNSCx_DIV_TIMER_16BIT, +#elif defined(CONFIG_MN10300_TTYSM2_TIMER9) + .tm_name = "ttySM2/Timer9", + ._tmxmd = &TM9MD, + ._tmxbr = &TM9BR, + ._tmicr = &TM9ICR, + .tm_irq = TM9IRQ, + .div_timer = MNSCx_DIV_TIMER_16BIT, +#elif defined(CONFIG_MN10300_TTYSM2_TIMER1) + .tm_name = "ttySM2/Timer1", + ._tmxmd = &TM1MD, + ._tmxbr = (volatile u16 *)&TM1BR, + ._tmicr = &TM1ICR, + .tm_irq = TM1IRQ, + .div_timer = MNSCx_DIV_TIMER_8BIT, +#elif defined(CONFIG_MN10300_TTYSM2_TIMER3) + .tm_name = "ttySM2/Timer3", + ._tmxmd = &TM3MD, + ._tmxbr = (volatile u16 *)&TM3BR, + ._tmicr = &TM3ICR, + .tm_irq = TM3IRQ, + .div_timer = MNSCx_DIV_TIMER_8BIT, +#else +#error "Unknown config for ttySM2" +#endif .rx_irq = SC2RXIRQ, .tx_irq = SC2TXIRQ, .rx_icr = &GxICR(SC2RXIRQ), @@ -322,9 +375,13 @@ struct mn10300_serial_port *mn10300_serial_ports[NR_UARTS + 1] = { */ static void mn10300_serial_mask_ack(unsigned int irq) { + unsigned long flags; u16 tmp; + + flags = arch_local_cli_save(); GxICR(irq) = GxICR_LEVEL_6; tmp = GxICR(irq); /* flush write buffer */ + arch_local_irq_restore(flags); } static void mn10300_serial_nop(unsigned int irq) @@ -348,23 +405,36 @@ struct mn10300_serial_int mn10300_serial_int_tbl[NR_IRQS]; static void mn10300_serial_dis_tx_intr(struct mn10300_serial_port *port) { + unsigned long flags; u16 x; - *port->tx_icr = GxICR_LEVEL_1 | GxICR_DETECT; + + flags = arch_local_cli_save(); + *port->tx_icr = NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL); x = *port->tx_icr; + arch_local_irq_restore(flags); } static void mn10300_serial_en_tx_intr(struct mn10300_serial_port *port) { + unsigned long flags; u16 x; - *port->tx_icr = GxICR_LEVEL_1 | GxICR_ENABLE; + + flags = arch_local_cli_save(); + *port->tx_icr = + NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL) | GxICR_ENABLE; x = *port->tx_icr; + arch_local_irq_restore(flags); } static void mn10300_serial_dis_rx_intr(struct mn10300_serial_port *port) { + unsigned long flags; u16 x; - *port->rx_icr = GxICR_LEVEL_1 | GxICR_DETECT; + + flags = arch_local_cli_save(); + *port->rx_icr = NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL); x = *port->rx_icr; + arch_local_irq_restore(flags); } /* @@ -650,7 +720,7 @@ static unsigned int mn10300_serial_tx_empty(struct uart_port *_port) static void mn10300_serial_set_mctrl(struct uart_port *_port, unsigned int mctrl) { - struct mn10300_serial_port *port = + struct mn10300_serial_port *port __attribute__ ((unused)) = container_of(_port, struct mn10300_serial_port, uart); _enter("%s,%x", port->name, mctrl); @@ -706,6 +776,7 @@ static void mn10300_serial_start_tx(struct uart_port *_port) UART_XMIT_SIZE)); /* kick the virtual DMA controller */ + arch_local_cli(); x = *port->tx_icr; x |= GxICR_ENABLE; @@ -716,10 +787,14 @@ static void mn10300_serial_start_tx(struct uart_port *_port) _debug("CTR=%04hx ICR=%02hx STR=%04x TMD=%02hx TBR=%04hx ICR=%04hx", *port->_control, *port->_intr, *port->_status, - *port->_tmxmd, *port->_tmxbr, *port->tx_icr); + *port->_tmxmd, + (port->div_timer == MNSCx_DIV_TIMER_8BIT) ? + *(volatile u8 *)port->_tmxbr : *port->_tmxbr, + *port->tx_icr); *port->tx_icr = x; x = *port->tx_icr; + arch_local_sti(); } /* @@ -842,8 +917,10 @@ static int mn10300_serial_startup(struct uart_port *_port) pint->port = port; pint->vdma = mn10300_serial_vdma_tx_handler; - set_intr_level(port->rx_irq, GxICR_LEVEL_1); - set_intr_level(port->tx_irq, GxICR_LEVEL_1); + set_intr_level(port->rx_irq, + NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL)); + set_intr_level(port->tx_irq, + NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL)); set_irq_chip(port->tm_irq, &mn10300_serial_pic); if (request_irq(port->rx_irq, mn10300_serial_interrupt, @@ -876,6 +953,7 @@ error: */ static void mn10300_serial_shutdown(struct uart_port *_port) { + u16 x; struct mn10300_serial_port *port = container_of(_port, struct mn10300_serial_port, uart); @@ -897,8 +975,12 @@ static void mn10300_serial_shutdown(struct uart_port *_port) free_irq(port->rx_irq, port); free_irq(port->tx_irq, port); - *port->rx_icr = GxICR_LEVEL_1; - *port->tx_icr = GxICR_LEVEL_1; + arch_local_cli(); + *port->rx_icr = NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL); + x = *port->rx_icr; + *port->tx_icr = NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL); + x = *port->tx_icr; + arch_local_sti(); } /* @@ -947,11 +1029,66 @@ static void mn10300_serial_change_speed(struct mn10300_serial_port *port, /* Determine divisor based on baud rate */ battempt = 0; - if (div_timer == MNSCx_DIV_TIMER_16BIT) - scxctr |= SC0CTR_CK_TM8UFLOW_8; /* ( == SC1CTR_CK_TM9UFLOW_8 - * == SC2CTR_CK_TM10UFLOW) */ - else if (div_timer == MNSCx_DIV_TIMER_8BIT) + switch (port->uart.line) { +#ifdef CONFIG_MN10300_TTYSM0 + case 0: /* ttySM0 */ +#if defined(CONFIG_MN10300_TTYSM0_TIMER8) + scxctr |= SC0CTR_CK_TM8UFLOW_8; +#elif defined(CONFIG_MN10300_TTYSM0_TIMER0) + scxctr |= SC0CTR_CK_TM0UFLOW_8; +#elif defined(CONFIG_MN10300_TTYSM0_TIMER2) scxctr |= SC0CTR_CK_TM2UFLOW_8; +#else +#error "Unknown config for ttySM0" +#endif + break; +#endif /* CONFIG_MN10300_TTYSM0 */ + +#ifdef CONFIG_MN10300_TTYSM1 + case 1: /* ttySM1 */ +#if defined(CONFIG_AM33_2) || defined(CONFIG_AM33_3) +#if defined(CONFIG_MN10300_TTYSM1_TIMER9) + scxctr |= SC1CTR_CK_TM9UFLOW_8; +#elif defined(CONFIG_MN10300_TTYSM1_TIMER3) + scxctr |= SC1CTR_CK_TM3UFLOW_8; +#else +#error "Unknown config for ttySM1" +#endif +#else /* CONFIG_AM33_2 || CONFIG_AM33_3 */ +#if defined(CONFIG_MN10300_TTYSM1_TIMER12) + scxctr |= SC1CTR_CK_TM12UFLOW_8; +#else +#error "Unknown config for ttySM1" +#endif +#endif /* CONFIG_AM33_2 || CONFIG_AM33_3 */ + break; +#endif /* CONFIG_MN10300_TTYSM1 */ + +#ifdef CONFIG_MN10300_TTYSM2 + case 2: /* ttySM2 */ +#if defined(CONFIG_AM33_2) +#if defined(CONFIG_MN10300_TTYSM2_TIMER10) + scxctr |= SC2CTR_CK_TM10UFLOW; +#else +#error "Unknown config for ttySM2" +#endif +#else /* CONFIG_AM33_2 */ +#if defined(CONFIG_MN10300_TTYSM2_TIMER9) + scxctr |= SC2CTR_CK_TM9UFLOW_8; +#elif defined(CONFIG_MN10300_TTYSM2_TIMER1) + scxctr |= SC2CTR_CK_TM1UFLOW_8; +#elif defined(CONFIG_MN10300_TTYSM2_TIMER3) + scxctr |= SC2CTR_CK_TM3UFLOW_8; +#else +#error "Unknown config for ttySM2" +#endif +#endif /* CONFIG_AM33_2 */ + break; +#endif /* CONFIG_MN10300_TTYSM2 */ + + default: + break; + } try_alternative: baud = uart_get_baud_rate(&port->uart, new, old, 0, @@ -1195,6 +1332,12 @@ static void mn10300_serial_set_termios(struct uart_port *_port, ctr &= ~SC2CTR_TWE; *port->_control = ctr; } + + /* change Transfer bit-order (LSB/MSB) */ + if (new->c_cflag & CODMSB) + *port->_control |= SC01CTR_OD_MSBFIRST; /* MSB MODE */ + else + *port->_control &= ~SC01CTR_OD_MSBFIRST; /* LSB MODE */ } /* @@ -1302,11 +1445,16 @@ static int __init mn10300_serial_init(void) printk(KERN_INFO "%s version %s (%s)\n", serial_name, serial_version, serial_revdate); -#ifdef CONFIG_MN10300_TTYSM2 - SC2TIM = 8; /* make the baud base of timer 2 IOCLK/8 */ +#if defined(CONFIG_MN10300_TTYSM2) && defined(CONFIG_AM33_2) + { + int tmp; + SC2TIM = 8; /* make the baud base of timer 2 IOCLK/8 */ + tmp = SC2TIM; + } #endif - set_intr_stub(EXCEP_IRQ_LEVEL1, mn10300_serial_vdma_interrupt); + set_intr_stub(NUM2EXCEP_IRQ_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL), + mn10300_serial_vdma_interrupt); ret = uart_register_driver(&mn10300_serial_driver); if (!ret) { @@ -1366,9 +1514,11 @@ static void mn10300_serial_console_write(struct console *co, port = mn10300_serial_ports[co->index]; /* firstly hijack the serial port from the "virtual DMA" controller */ + arch_local_cli(); txicr = *port->tx_icr; - *port->tx_icr = GxICR_LEVEL_1; + *port->tx_icr = NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL); tmp = *port->tx_icr; + arch_local_sti(); /* the transmitter may be disabled */ scxctr = *port->_control; @@ -1422,8 +1572,10 @@ static void mn10300_serial_console_write(struct console *co, if (!(scxctr & SC01CTR_TXE)) *port->_control = scxctr; + arch_local_cli(); *port->tx_icr = txicr; tmp = *port->tx_icr; + arch_local_sti(); } /* diff --git a/arch/mn10300/kernel/mn10300-watchdog-low.S b/arch/mn10300/kernel/mn10300-watchdog-low.S index 9962447..f2f5c9c 100644 --- a/arch/mn10300/kernel/mn10300-watchdog-low.S +++ b/arch/mn10300/kernel/mn10300-watchdog-low.S @@ -16,6 +16,7 @@ #include <asm/intctl-regs.h> #include <asm/timer-regs.h> #include <asm/frame.inc> +#include <linux/threads.h> .text @@ -53,7 +54,13 @@ watchdog_handler: .type touch_nmi_watchdog,@function touch_nmi_watchdog: clr d0 - mov d0,(watchdog_alert_counter) + clr d1 + mov watchdog_alert_counter, a0 + setlb + mov d0, (a0+) + inc d1 + cmp NR_CPUS, d1 + lne ret [],0 .size touch_nmi_watchdog,.-touch_nmi_watchdog diff --git a/arch/mn10300/kernel/mn10300-watchdog.c b/arch/mn10300/kernel/mn10300-watchdog.c index f362d9d..965dd61 100644 --- a/arch/mn10300/kernel/mn10300-watchdog.c +++ b/arch/mn10300/kernel/mn10300-watchdog.c @@ -30,7 +30,7 @@ static DEFINE_SPINLOCK(watchdog_print_lock); static unsigned int watchdog; static unsigned int watchdog_hz = 1; -unsigned int watchdog_alert_counter; +unsigned int watchdog_alert_counter[NR_CPUS]; EXPORT_SYMBOL(touch_nmi_watchdog); @@ -39,9 +39,6 @@ EXPORT_SYMBOL(touch_nmi_watchdog); * is to check its timer makes IRQ counts. If they are not * changing then that CPU has some problem. * - * as these watchdog NMI IRQs are generated on every CPU, we only - * have to check the current processor. - * * since NMIs dont listen to _any_ locks, we have to be extremely * careful not to rely on unsafe variables. The printk might lock * up though, so we have to break up any console locks first ... @@ -69,8 +66,8 @@ int __init check_watchdog(void) printk(KERN_INFO "OK.\n"); - /* now that we know it works we can reduce NMI frequency to - * something more reasonable; makes a difference in some configs + /* now that we know it works we can reduce NMI frequency to something + * more reasonable; makes a difference in some configs */ watchdog_hz = 1; @@ -121,15 +118,22 @@ void __init watchdog_go(void) } } +#ifdef CONFIG_SMP +static void watchdog_dump_register(void *dummy) +{ + printk(KERN_ERR "--- Register Dump (CPU%d) ---\n", CPUID); + show_registers(__frame); +} +#endif + asmlinkage void watchdog_interrupt(struct pt_regs *regs, enum exception_code excep) { - /* * Since current-> is always on the stack, and we always switch * the stack NMI-atomically, it's safe to use smp_processor_id(). */ - int sum, cpu = smp_processor_id(); + int sum, cpu; int irq = NMIIRQ; u8 wdt, tmp; @@ -138,43 +142,61 @@ void watchdog_interrupt(struct pt_regs *regs, enum exception_code excep) tmp = WDCTR; NMICR = NMICR_WDIF; - nmi_count(cpu)++; + nmi_count(smp_processor_id())++; kstat_incr_irqs_this_cpu(irq, irq_to_desc(irq)); - sum = irq_stat[cpu].__irq_count; - - if (last_irq_sums[cpu] == sum) { - /* - * Ayiee, looks like this CPU is stuck ... - * wait a few IRQs (5 seconds) before doing the oops ... - */ - watchdog_alert_counter++; - if (watchdog_alert_counter == 5 * watchdog_hz) { - spin_lock(&watchdog_print_lock); + + for_each_online_cpu(cpu) { + + sum = irq_stat[cpu].__irq_count; + + if ((last_irq_sums[cpu] == sum) +#if defined(CONFIG_GDBSTUB) && defined(CONFIG_SMP) + && !(CHK_GDBSTUB_BUSY() + || atomic_read(&cpu_doing_single_step)) +#endif + ) { /* - * We are in trouble anyway, lets at least try - * to get a message out. + * Ayiee, looks like this CPU is stuck ... + * wait a few IRQs (5 seconds) before doing the oops ... */ - bust_spinlocks(1); - printk(KERN_ERR - "NMI Watchdog detected LOCKUP on CPU%d," - " pc %08lx, registers:\n", - cpu, regs->pc); - show_registers(regs); - printk("console shuts up ...\n"); - console_silent(); - spin_unlock(&watchdog_print_lock); - bust_spinlocks(0); + watchdog_alert_counter[cpu]++; + if (watchdog_alert_counter[cpu] == 5 * watchdog_hz) { + spin_lock(&watchdog_print_lock); + /* + * We are in trouble anyway, lets at least try + * to get a message out. + */ + bust_spinlocks(1); + printk(KERN_ERR + "NMI Watchdog detected LOCKUP on CPU%d," + " pc %08lx, registers:\n", + cpu, regs->pc); +#ifdef CONFIG_SMP + printk(KERN_ERR + "--- Register Dump (CPU%d) ---\n", + CPUID); +#endif + show_registers(regs); +#ifdef CONFIG_SMP + smp_nmi_call_function(watchdog_dump_register, + NULL, 1); +#endif + printk(KERN_NOTICE "console shuts up ...\n"); + console_silent(); + spin_unlock(&watchdog_print_lock); + bust_spinlocks(0); #ifdef CONFIG_GDBSTUB - if (gdbstub_busy) - gdbstub_exception(regs, excep); - else - gdbstub_intercept(regs, excep); + if (CHK_GDBSTUB_BUSY_AND_ACTIVE()) + gdbstub_exception(regs, excep); + else + gdbstub_intercept(regs, excep); #endif - do_exit(SIGSEGV); + do_exit(SIGSEGV); + } + } else { + last_irq_sums[cpu] = sum; + watchdog_alert_counter[cpu] = 0; } - } else { - last_irq_sums[cpu] = sum; - watchdog_alert_counter = 0; } WDCTR = wdt | WDCTR_WDRST; diff --git a/arch/mn10300/kernel/process.c b/arch/mn10300/kernel/process.c index 243e33c..b2e85ed 100644 --- a/arch/mn10300/kernel/process.c +++ b/arch/mn10300/kernel/process.c @@ -57,6 +57,7 @@ unsigned long thread_saved_pc(struct task_struct *tsk) void (*pm_power_off)(void); EXPORT_SYMBOL(pm_power_off); +#if !defined(CONFIG_SMP) || defined(CONFIG_HOTPLUG_CPU) /* * we use this if we don't have any better idle routine */ @@ -69,6 +70,35 @@ static void default_idle(void) local_irq_enable(); } +#else /* !CONFIG_SMP || CONFIG_HOTPLUG_CPU */ +/* + * On SMP it's slightly faster (but much more power-consuming!) + * to poll the ->work.need_resched flag instead of waiting for the + * cross-CPU IPI to arrive. Use this option with caution. + */ +static inline void poll_idle(void) +{ + int oldval; + + local_irq_enable(); + + /* + * Deal with another CPU just having chosen a thread to + * run here: + */ + oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED); + + if (!oldval) { + set_thread_flag(TIF_POLLING_NRFLAG); + while (!need_resched()) + cpu_relax(); + clear_thread_flag(TIF_POLLING_NRFLAG); + } else { + set_need_resched(); + } +} +#endif /* !CONFIG_SMP || CONFIG_HOTPLUG_CPU */ + /* * the idle thread * - there's no useful work to be done, so just try to conserve power and have @@ -77,8 +107,6 @@ static void default_idle(void) */ void cpu_idle(void) { - int cpu = smp_processor_id(); - /* endless idle loop with no priority at all */ for (;;) { while (!need_resched()) { @@ -86,8 +114,13 @@ void cpu_idle(void) smp_rmb(); idle = pm_idle; - if (!idle) + if (!idle) { +#if defined(CONFIG_SMP) && !defined(CONFIG_HOTPLUG_CPU) + idle = poll_idle; +#else /* CONFIG_SMP && !CONFIG_HOTPLUG_CPU */ idle = default_idle; +#endif /* CONFIG_SMP && !CONFIG_HOTPLUG_CPU */ + } idle(); } @@ -233,7 +266,7 @@ int copy_thread(unsigned long clone_flags, } /* set up things up so the scheduler can start the new task */ - p->thread.__frame = c_kregs; + p->thread.frame = c_kregs; p->thread.a3 = (unsigned long) c_kregs; p->thread.sp = c_ksp; p->thread.pc = (unsigned long) ret_from_fork; diff --git a/arch/mn10300/kernel/profile.c b/arch/mn10300/kernel/profile.c index 20d7d03..4f342f7 100644 --- a/arch/mn10300/kernel/profile.c +++ b/arch/mn10300/kernel/profile.c @@ -41,7 +41,7 @@ static __init int profile_init(void) tmp = TM11ICR; printk(KERN_INFO "Profiling initiated on timer 11, priority 0, %uHz\n", - mn10300_ioclk / 8 / (TM11BR + 1)); + MN10300_IOCLK / 8 / (TM11BR + 1)); printk(KERN_INFO "Profile histogram stored %p-%p\n", prof_buffer, (u8 *)(prof_buffer + prof_len) - 1); diff --git a/arch/mn10300/kernel/rtc.c b/arch/mn10300/kernel/rtc.c index 4eef0e7..e9e20f9 100644 --- a/arch/mn10300/kernel/rtc.c +++ b/arch/mn10300/kernel/rtc.c @@ -20,18 +20,22 @@ DEFINE_SPINLOCK(rtc_lock); EXPORT_SYMBOL(rtc_lock); -/* time for RTC to update itself in ioclks */ -static unsigned long mn10300_rtc_update_period; - +/* + * Read the current RTC time + */ void read_persistent_clock(struct timespec *ts) { struct rtc_time tm; get_rtc_time(&tm); - ts->tv_sec = mktime(tm.tm_year, tm.tm_mon, tm.tm_mday, - tm.tm_hour, tm.tm_min, tm.tm_sec); ts->tv_nsec = 0; + ts->tv_sec = mktime(tm.tm_year, tm.tm_mon, tm.tm_mday, + tm.tm_hour, tm.tm_min, tm.tm_sec); + + /* if rtc is way off in the past, set something reasonable */ + if (ts->tv_sec < 0) + ts->tv_sec = mktime(2009, 1, 1, 12, 0, 0); } /* @@ -115,39 +119,14 @@ int update_persistent_clock(struct timespec now) */ void __init calibrate_clock(void) { - unsigned long count0, counth, count1; unsigned char status; /* make sure the RTC is running and is set to operate in 24hr mode */ status = RTSRC; RTCRB |= RTCRB_SET; RTCRB |= RTCRB_TM_24HR; + RTCRB &= ~RTCRB_DM_BINARY; RTCRA |= RTCRA_DVR; RTCRA &= ~RTCRA_DVR; RTCRB &= ~RTCRB_SET; - - /* work out the clock speed by counting clock cycles between ends of - * the RTC update cycle - track the RTC through one complete update - * cycle (1 second) - */ - startup_timestamp_counter(); - - while (!(RTCRA & RTCRA_UIP)) {} - while ((RTCRA & RTCRA_UIP)) {} - - count0 = TMTSCBC; - - while (!(RTCRA & RTCRA_UIP)) {} - - counth = TMTSCBC; - - while ((RTCRA & RTCRA_UIP)) {} - - count1 = TMTSCBC; - - shutdown_timestamp_counter(); - - MN10300_TSCCLK = count0 - count1; /* the timers count down */ - mn10300_rtc_update_period = counth - count1; - MN10300_TSC_PER_HZ = MN10300_TSCCLK / HZ; } diff --git a/arch/mn10300/kernel/setup.c b/arch/mn10300/kernel/setup.c index d464aff..1251457 100644 --- a/arch/mn10300/kernel/setup.c +++ b/arch/mn10300/kernel/setup.c @@ -22,6 +22,7 @@ #include <linux/init.h> #include <linux/bootmem.h> #include <linux/seq_file.h> +#include <linux/cpu.h> #include <asm/processor.h> #include <linux/console.h> #include <asm/uaccess.h> @@ -30,7 +31,6 @@ #include <asm/io.h> #include <asm/smp.h> #include <proc/proc.h> -#include <asm/busctl-regs.h> #include <asm/fpu.h> #include <asm/sections.h> @@ -64,11 +64,13 @@ unsigned long memory_size; struct thread_info *__current_ti = &init_thread_union.thread_info; struct task_struct *__current = &init_task; -#define mn10300_known_cpus 3 +#define mn10300_known_cpus 5 static const char *const mn10300_cputypes[] = { - "am33v1", - "am33v2", - "am34v1", + "am33-1", + "am33-2", + "am34-1", + "am33-3", + "am34-2", "unknown" }; @@ -123,6 +125,7 @@ void __init setup_arch(char **cmdline_p) cpu_init(); unit_setup(); + smp_init_cpus(); parse_mem_cmdline(cmdline_p); init_mm.start_code = (unsigned long)&_text; @@ -179,7 +182,6 @@ void __init setup_arch(char **cmdline_p) void __init cpu_init(void) { unsigned long cpurev = CPUREV, type; - unsigned long base, size; type = (CPUREV & CPUREV_TYPE) >> CPUREV_TYPE_S; if (type > mn10300_known_cpus) @@ -189,47 +191,46 @@ void __init cpu_init(void) mn10300_cputypes[type], (cpurev & CPUREV_REVISION) >> CPUREV_REVISION_S); - /* determine the memory size and base from the memory controller regs */ - memory_size = 0; - - base = SDBASE(0); - if (base & SDBASE_CE) { - size = (base & SDBASE_CBAM) << SDBASE_CBAM_SHIFT; - size = ~size + 1; - base &= SDBASE_CBA; + get_mem_info(&phys_memory_base, &memory_size); + phys_memory_end = phys_memory_base + memory_size; - printk(KERN_INFO "SDRAM[0]: %luMb @%08lx\n", size >> 20, base); - memory_size += size; - phys_memory_base = base; - } + fpu_init_state(); +} - base = SDBASE(1); - if (base & SDBASE_CE) { - size = (base & SDBASE_CBAM) << SDBASE_CBAM_SHIFT; - size = ~size + 1; - base &= SDBASE_CBA; +static struct cpu cpu_devices[NR_CPUS]; - printk(KERN_INFO "SDRAM[1]: %luMb @%08lx\n", size >> 20, base); - memory_size += size; - if (phys_memory_base == 0) - phys_memory_base = base; - } +static int __init topology_init(void) +{ + int i; - phys_memory_end = phys_memory_base + memory_size; + for_each_present_cpu(i) + register_cpu(&cpu_devices[i], i); -#ifdef CONFIG_FPU - fpu_init_state(); -#endif + return 0; } +subsys_initcall(topology_init); + /* * Get CPU information for use by the procfs. */ static int show_cpuinfo(struct seq_file *m, void *v) { +#ifdef CONFIG_SMP + struct mn10300_cpuinfo *c = v; + unsigned long cpu_id = c - cpu_data; + unsigned long cpurev = c->type, type, icachesz, dcachesz; +#else /* CONFIG_SMP */ + unsigned long cpu_id = 0; unsigned long cpurev = CPUREV, type, icachesz, dcachesz; +#endif /* CONFIG_SMP */ - type = (CPUREV & CPUREV_TYPE) >> CPUREV_TYPE_S; +#ifdef CONFIG_SMP + if (!cpu_online(cpu_id)) + return 0; +#endif + + type = (cpurev & CPUREV_TYPE) >> CPUREV_TYPE_S; if (type > mn10300_known_cpus) type = mn10300_known_cpus; @@ -244,13 +245,14 @@ static int show_cpuinfo(struct seq_file *m, void *v) 1024; seq_printf(m, - "processor : 0\n" + "processor : %ld\n" "vendor_id : Matsushita\n" "cpu core : %s\n" "cpu rev : %lu\n" "model name : " PROCESSOR_MODEL_NAME "\n" "icache size: %lu\n" "dcache size: %lu\n", + cpu_id, mn10300_cputypes[type], (cpurev & CPUREV_REVISION) >> CPUREV_REVISION_S, icachesz, @@ -262,8 +264,13 @@ static int show_cpuinfo(struct seq_file *m, void *v) "bogomips : %lu.%02lu\n\n", MN10300_IOCLK / 1000000, (MN10300_IOCLK / 10000) % 100, +#ifdef CONFIG_SMP + c->loops_per_jiffy / (500000 / HZ), + (c->loops_per_jiffy / (5000 / HZ)) % 100 +#else /* CONFIG_SMP */ loops_per_jiffy / (500000 / HZ), (loops_per_jiffy / (5000 / HZ)) % 100 +#endif /* CONFIG_SMP */ ); return 0; diff --git a/arch/mn10300/kernel/smp-low.S b/arch/mn10300/kernel/smp-low.S new file mode 100644 index 0000000..72938ce --- /dev/null +++ b/arch/mn10300/kernel/smp-low.S @@ -0,0 +1,97 @@ +/* SMP IPI low-level handler + * + * Copyright (C) 2006-2007 Matsushita Electric Industrial Co., Ltd. + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#include <linux/sys.h> +#include <linux/linkage.h> +#include <asm/smp.h> +#include <asm/system.h> +#include <asm/thread_info.h> +#include <asm/cpu-regs.h> +#include <proc/smp-regs.h> +#include <asm/asm-offsets.h> +#include <asm/frame.inc> + + .am33_2 + +############################################################################### +# +# IPI interrupt handler +# +############################################################################### + .globl mn10300_low_ipi_handler +mn10300_low_ipi_handler: + add -4,sp + mov d0,(sp) + movhu (IAGR),d0 + and IAGR_GN,d0 + lsr 0x2,d0 +#ifdef CONFIG_MN10300_CACHE_ENABLED + cmp FLUSH_CACHE_IPI,d0 + beq mn10300_flush_cache_ipi +#endif + cmp SMP_BOOT_IRQ,d0 + beq mn10300_smp_boot_ipi + /* OTHERS */ + mov (sp),d0 + add 4,sp +#ifdef CONFIG_GDBSTUB + jmp gdbstub_io_rx_handler +#else + jmp end +#endif + +############################################################################### +# +# Cache flush IPI interrupt handler +# +############################################################################### +#ifdef CONFIG_MN10300_CACHE_ENABLED +mn10300_flush_cache_ipi: + mov (sp),d0 + add 4,sp + + /* FLUSH_CACHE_IPI */ + add -4,sp + SAVE_ALL + mov GxICR_DETECT,d2 + movbu d2,(GxICR(FLUSH_CACHE_IPI)) # ACK the interrupt + movhu (GxICR(FLUSH_CACHE_IPI)),d2 + call smp_cache_interrupt[],0 + RESTORE_ALL + jmp end +#endif + +############################################################################### +# +# SMP boot CPU IPI interrupt handler +# +############################################################################### +mn10300_smp_boot_ipi: + /* clear interrupt */ + movhu (GxICR(SMP_BOOT_IRQ)),d0 + and ~GxICR_REQUEST,d0 + movhu d0,(GxICR(SMP_BOOT_IRQ)) + mov (sp),d0 + add 4,sp + + # get stack + mov (CPUID),a0 + add -1,a0 + add a0,a0 + add a0,a0 + mov (start_stack,a0),a0 + mov a0,sp + jmp initialize_secondary + + +# Jump here after RTI to suppress the icache lookahead +end: diff --git a/arch/mn10300/kernel/smp.c b/arch/mn10300/kernel/smp.c new file mode 100644 index 0000000..b80234c --- /dev/null +++ b/arch/mn10300/kernel/smp.c @@ -0,0 +1,1141 @@ +/* SMP support routines. + * + * Copyright (C) 2006-2008 Panasonic Corporation + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/init.h> +#include <linux/jiffies.h> +#include <linux/cpumask.h> +#include <linux/err.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/profile.h> +#include <linux/smp.h> +#include <asm/tlbflush.h> +#include <asm/system.h> +#include <asm/bitops.h> +#include <asm/processor.h> +#include <asm/bug.h> +#include <asm/exceptions.h> +#include <asm/hardirq.h> +#include <asm/fpu.h> +#include <asm/mmu_context.h> +#include <asm/thread_info.h> +#include <asm/cpu-regs.h> +#include <asm/intctl-regs.h> +#include "internal.h" + +#ifdef CONFIG_HOTPLUG_CPU +#include <linux/cpu.h> +#include <asm/cacheflush.h> + +static unsigned long sleep_mode[NR_CPUS]; + +static void run_sleep_cpu(unsigned int cpu); +static void run_wakeup_cpu(unsigned int cpu); +#endif /* CONFIG_HOTPLUG_CPU */ + +/* + * Debug Message function + */ + +#undef DEBUG_SMP +#ifdef DEBUG_SMP +#define Dprintk(fmt, ...) printk(KERN_DEBUG fmt, ##__VA_ARGS__) +#else +#define Dprintk(fmt, ...) no_printk(KERN_DEBUG fmt, ##__VA_ARGS__) +#endif + +/* timeout value in msec for smp_nmi_call_function. zero is no timeout. */ +#define CALL_FUNCTION_NMI_IPI_TIMEOUT 0 + +/* + * Structure and data for smp_nmi_call_function(). + */ +struct nmi_call_data_struct { + smp_call_func_t func; + void *info; + cpumask_t started; + cpumask_t finished; + int wait; + char size_alignment[0] + __attribute__ ((__aligned__(SMP_CACHE_BYTES))); +} __attribute__ ((__aligned__(SMP_CACHE_BYTES))); + +static DEFINE_SPINLOCK(smp_nmi_call_lock); +static struct nmi_call_data_struct *nmi_call_data; + +/* + * Data structures and variables + */ +static cpumask_t cpu_callin_map; /* Bitmask of callin CPUs */ +static cpumask_t cpu_callout_map; /* Bitmask of callout CPUs */ +cpumask_t cpu_boot_map; /* Bitmask of boot APs */ +unsigned long start_stack[NR_CPUS - 1]; + +/* + * Per CPU parameters + */ +struct mn10300_cpuinfo cpu_data[NR_CPUS] __cacheline_aligned; + +static int cpucount; /* The count of boot CPUs */ +static cpumask_t smp_commenced_mask; +cpumask_t cpu_initialized __initdata = CPU_MASK_NONE; + +/* + * Function Prototypes + */ +static int do_boot_cpu(int); +static void smp_show_cpu_info(int cpu_id); +static void smp_callin(void); +static void smp_online(void); +static void smp_store_cpu_info(int); +static void smp_cpu_init(void); +static void smp_tune_scheduling(void); +static void send_IPI_mask(const cpumask_t *cpumask, int irq); +static void init_ipi(void); + +/* + * IPI Initialization interrupt definitions + */ +static void mn10300_ipi_disable(unsigned int irq); +static void mn10300_ipi_enable(unsigned int irq); +static void mn10300_ipi_ack(unsigned int irq); +static void mn10300_ipi_nop(unsigned int irq); + +static struct irq_chip mn10300_ipi_type = { + .name = "cpu_ipi", + .disable = mn10300_ipi_disable, + .enable = mn10300_ipi_enable, + .ack = mn10300_ipi_ack, + .eoi = mn10300_ipi_nop +}; + +static irqreturn_t smp_reschedule_interrupt(int irq, void *dev_id); +static irqreturn_t smp_call_function_interrupt(int irq, void *dev_id); +static irqreturn_t smp_ipi_timer_interrupt(int irq, void *dev_id); + +static struct irqaction reschedule_ipi = { + .handler = smp_reschedule_interrupt, + .name = "smp reschedule IPI" +}; +static struct irqaction call_function_ipi = { + .handler = smp_call_function_interrupt, + .name = "smp call function IPI" +}; +static struct irqaction local_timer_ipi = { + .handler = smp_ipi_timer_interrupt, + .flags = IRQF_DISABLED, + .name = "smp local timer IPI" +}; + +/** + * init_ipi - Initialise the IPI mechanism + */ +static void init_ipi(void) +{ + unsigned long flags; + u16 tmp16; + + /* set up the reschedule IPI */ + set_irq_chip_and_handler(RESCHEDULE_IPI, + &mn10300_ipi_type, handle_percpu_irq); + setup_irq(RESCHEDULE_IPI, &reschedule_ipi); + set_intr_level(RESCHEDULE_IPI, RESCHEDULE_GxICR_LV); + mn10300_ipi_enable(RESCHEDULE_IPI); + + /* set up the call function IPI */ + set_irq_chip_and_handler(CALL_FUNC_SINGLE_IPI, + &mn10300_ipi_type, handle_percpu_irq); + setup_irq(CALL_FUNC_SINGLE_IPI, &call_function_ipi); + set_intr_level(CALL_FUNC_SINGLE_IPI, CALL_FUNCTION_GxICR_LV); + mn10300_ipi_enable(CALL_FUNC_SINGLE_IPI); + + /* set up the local timer IPI */ + set_irq_chip_and_handler(LOCAL_TIMER_IPI, + &mn10300_ipi_type, handle_percpu_irq); + setup_irq(LOCAL_TIMER_IPI, &local_timer_ipi); + set_intr_level(LOCAL_TIMER_IPI, LOCAL_TIMER_GxICR_LV); + mn10300_ipi_enable(LOCAL_TIMER_IPI); + +#ifdef CONFIG_MN10300_CACHE_ENABLED + /* set up the cache flush IPI */ + flags = arch_local_cli_save(); + __set_intr_stub(NUM2EXCEP_IRQ_LEVEL(FLUSH_CACHE_GxICR_LV), + mn10300_low_ipi_handler); + GxICR(FLUSH_CACHE_IPI) = FLUSH_CACHE_GxICR_LV | GxICR_DETECT; + mn10300_ipi_enable(FLUSH_CACHE_IPI); + arch_local_irq_restore(flags); +#endif + + /* set up the NMI call function IPI */ + flags = arch_local_cli_save(); + GxICR(CALL_FUNCTION_NMI_IPI) = GxICR_NMI | GxICR_ENABLE | GxICR_DETECT; + tmp16 = GxICR(CALL_FUNCTION_NMI_IPI); + arch_local_irq_restore(flags); + + /* set up the SMP boot IPI */ + flags = arch_local_cli_save(); + __set_intr_stub(NUM2EXCEP_IRQ_LEVEL(SMP_BOOT_GxICR_LV), + mn10300_low_ipi_handler); + arch_local_irq_restore(flags); +} + +/** + * mn10300_ipi_shutdown - Shut down handling of an IPI + * @irq: The IPI to be shut down. + */ +static void mn10300_ipi_shutdown(unsigned int irq) +{ + unsigned long flags; + u16 tmp; + + flags = arch_local_cli_save(); + + tmp = GxICR(irq); + GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_DETECT; + tmp = GxICR(irq); + + arch_local_irq_restore(flags); +} + +/** + * mn10300_ipi_enable - Enable an IPI + * @irq: The IPI to be enabled. + */ +static void mn10300_ipi_enable(unsigned int irq) +{ + unsigned long flags; + u16 tmp; + + flags = arch_local_cli_save(); + + tmp = GxICR(irq); + GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE; + tmp = GxICR(irq); + + arch_local_irq_restore(flags); +} + +/** + * mn10300_ipi_disable - Disable an IPI + * @irq: The IPI to be disabled. + */ +static void mn10300_ipi_disable(unsigned int irq) +{ + unsigned long flags; + u16 tmp; + + flags = arch_local_cli_save(); + + tmp = GxICR(irq); + GxICR(irq) = tmp & GxICR_LEVEL; + tmp = GxICR(irq); + + arch_local_irq_restore(flags); +} + +/** + * mn10300_ipi_ack - Acknowledge an IPI interrupt in the PIC + * @irq: The IPI to be acknowledged. + * + * Clear the interrupt detection flag for the IPI on the appropriate interrupt + * channel in the PIC. + */ +static void mn10300_ipi_ack(unsigned int irq) +{ + unsigned long flags; + u16 tmp; + + flags = arch_local_cli_save(); + GxICR_u8(irq) = GxICR_DETECT; + tmp = GxICR(irq); + arch_local_irq_restore(flags); +} + +/** + * mn10300_ipi_nop - Dummy IPI action + * @irq: The IPI to be acted upon. + */ +static void mn10300_ipi_nop(unsigned int irq) +{ +} + +/** + * send_IPI_mask - Send IPIs to all CPUs in list + * @cpumask: The list of CPUs to target. + * @irq: The IPI request to be sent. + * + * Send the specified IPI to all the CPUs in the list, not waiting for them to + * finish before returning. The caller is responsible for synchronisation if + * that is needed. + */ +static void send_IPI_mask(const cpumask_t *cpumask, int irq) +{ + int i; + u16 tmp; + + for (i = 0; i < NR_CPUS; i++) { + if (cpu_isset(i, *cpumask)) { + /* send IPI */ + tmp = CROSS_GxICR(irq, i); + CROSS_GxICR(irq, i) = + tmp | GxICR_REQUEST | GxICR_DETECT; + tmp = CROSS_GxICR(irq, i); /* flush write buffer */ + } + } +} + +/** + * send_IPI_self - Send an IPI to this CPU. + * @irq: The IPI request to be sent. + * + * Send the specified IPI to the current CPU. + */ +void send_IPI_self(int irq) +{ + send_IPI_mask(cpumask_of(smp_processor_id()), irq); +} + +/** + * send_IPI_allbutself - Send IPIs to all the other CPUs. + * @irq: The IPI request to be sent. + * + * Send the specified IPI to all CPUs in the system barring the current one, + * not waiting for them to finish before returning. The caller is responsible + * for synchronisation if that is needed. + */ +void send_IPI_allbutself(int irq) +{ + cpumask_t cpumask; + + cpumask = cpu_online_map; + cpu_clear(smp_processor_id(), cpumask); + send_IPI_mask(&cpumask, irq); +} + +void arch_send_call_function_ipi_mask(const struct cpumask *mask) +{ + BUG(); + /*send_IPI_mask(mask, CALL_FUNCTION_IPI);*/ +} + +void arch_send_call_function_single_ipi(int cpu) +{ + send_IPI_mask(cpumask_of(cpu), CALL_FUNC_SINGLE_IPI); +} + +/** + * smp_send_reschedule - Send reschedule IPI to a CPU + * @cpu: The CPU to target. + */ +void smp_send_reschedule(int cpu) +{ + send_IPI_mask(cpumask_of(cpu), RESCHEDULE_IPI); +} + +/** + * smp_nmi_call_function - Send a call function NMI IPI to all CPUs + * @func: The function to ask to be run. + * @info: The context data to pass to that function. + * @wait: If true, wait (atomically) until function is run on all CPUs. + * + * Send a non-maskable request to all CPUs in the system, requesting them to + * run the specified function with the given context data, and, potentially, to + * wait for completion of that function on all CPUs. + * + * Returns 0 if successful, -ETIMEDOUT if we were asked to wait, but hit the + * timeout. + */ +int smp_nmi_call_function(smp_call_func_t func, void *info, int wait) +{ + struct nmi_call_data_struct data; + unsigned long flags; + unsigned int cnt; + int cpus, ret = 0; + + cpus = num_online_cpus() - 1; + if (cpus < 1) + return 0; + + data.func = func; + data.info = info; + data.started = cpu_online_map; + cpu_clear(smp_processor_id(), data.started); + data.wait = wait; + if (wait) + data.finished = data.started; + + spin_lock_irqsave(&smp_nmi_call_lock, flags); + nmi_call_data = &data; + smp_mb(); + + /* Send a message to all other CPUs and wait for them to respond */ + send_IPI_allbutself(CALL_FUNCTION_NMI_IPI); + + /* Wait for response */ + if (CALL_FUNCTION_NMI_IPI_TIMEOUT > 0) { + for (cnt = 0; + cnt < CALL_FUNCTION_NMI_IPI_TIMEOUT && + !cpus_empty(data.started); + cnt++) + mdelay(1); + + if (wait && cnt < CALL_FUNCTION_NMI_IPI_TIMEOUT) { + for (cnt = 0; + cnt < CALL_FUNCTION_NMI_IPI_TIMEOUT && + !cpus_empty(data.finished); + cnt++) + mdelay(1); + } + + if (cnt >= CALL_FUNCTION_NMI_IPI_TIMEOUT) + ret = -ETIMEDOUT; + + } else { + /* If timeout value is zero, wait until cpumask has been + * cleared */ + while (!cpus_empty(data.started)) + barrier(); + if (wait) + while (!cpus_empty(data.finished)) + barrier(); + } + + spin_unlock_irqrestore(&smp_nmi_call_lock, flags); + return ret; +} + +/** + * stop_this_cpu - Callback to stop a CPU. + * @unused: Callback context (ignored). + */ +void stop_this_cpu(void *unused) +{ + static volatile int stopflag; + unsigned long flags; + +#ifdef CONFIG_GDBSTUB + /* In case of single stepping smp_send_stop by other CPU, + * clear procindebug to avoid deadlock. + */ + atomic_set(&procindebug[smp_processor_id()], 0); +#endif /* CONFIG_GDBSTUB */ + + flags = arch_local_cli_save(); + cpu_clear(smp_processor_id(), cpu_online_map); + + while (!stopflag) + cpu_relax(); + + cpu_set(smp_processor_id(), cpu_online_map); + arch_local_irq_restore(flags); +} + +/** + * smp_send_stop - Send a stop request to all CPUs. + */ +void smp_send_stop(void) +{ + smp_nmi_call_function(stop_this_cpu, NULL, 0); +} + +/** + * smp_reschedule_interrupt - Reschedule IPI handler + * @irq: The interrupt number. + * @dev_id: The device ID. + * + * We need do nothing here, since the scheduling will be effected on our way + * back through entry.S. + * + * Returns IRQ_HANDLED to indicate we handled the interrupt successfully. + */ +static irqreturn_t smp_reschedule_interrupt(int irq, void *dev_id) +{ + /* do nothing */ + return IRQ_HANDLED; +} + +/** + * smp_call_function_interrupt - Call function IPI handler + * @irq: The interrupt number. + * @dev_id: The device ID. + * + * Returns IRQ_HANDLED to indicate we handled the interrupt successfully. + */ +static irqreturn_t smp_call_function_interrupt(int irq, void *dev_id) +{ + /* generic_smp_call_function_interrupt(); */ + generic_smp_call_function_single_interrupt(); + return IRQ_HANDLED; +} + +/** + * smp_nmi_call_function_interrupt - Non-maskable call function IPI handler + */ +void smp_nmi_call_function_interrupt(void) +{ + smp_call_func_t func = nmi_call_data->func; + void *info = nmi_call_data->info; + int wait = nmi_call_data->wait; + + /* Notify the initiating CPU that I've grabbed the data and am about to + * execute the function + */ + smp_mb(); + cpu_clear(smp_processor_id(), nmi_call_data->started); + (*func)(info); + + if (wait) { + smp_mb(); + cpu_clear(smp_processor_id(), nmi_call_data->finished); + } +} + +/** + * smp_ipi_timer_interrupt - Local timer IPI handler + * @irq: The interrupt number. + * @dev_id: The device ID. + * + * Returns IRQ_HANDLED to indicate we handled the interrupt successfully. + */ +static irqreturn_t smp_ipi_timer_interrupt(int irq, void *dev_id) +{ + return local_timer_interrupt(); +} + +void __init smp_init_cpus(void) +{ + int i; + for (i = 0; i < NR_CPUS; i++) { + set_cpu_possible(i, true); + set_cpu_present(i, true); + } +} + +/** + * smp_cpu_init - Initialise AP in start_secondary. + * + * For this Application Processor, set up init_mm, initialise FPU and set + * interrupt level 0-6 setting. + */ +static void __init smp_cpu_init(void) +{ + unsigned long flags; + int cpu_id = smp_processor_id(); + u16 tmp16; + + if (test_and_set_bit(cpu_id, &cpu_initialized)) { + printk(KERN_WARNING "CPU#%d already initialized!\n", cpu_id); + for (;;) + local_irq_enable(); + } + printk(KERN_INFO "Initializing CPU#%d\n", cpu_id); + + atomic_inc(&init_mm.mm_count); + current->active_mm = &init_mm; + BUG_ON(current->mm); + + enter_lazy_tlb(&init_mm, current); + + /* Force FPU initialization */ + clear_using_fpu(current); + + GxICR(CALL_FUNC_SINGLE_IPI) = CALL_FUNCTION_GxICR_LV | GxICR_DETECT; + mn10300_ipi_enable(CALL_FUNC_SINGLE_IPI); + + GxICR(LOCAL_TIMER_IPI) = LOCAL_TIMER_GxICR_LV | GxICR_DETECT; + mn10300_ipi_enable(LOCAL_TIMER_IPI); + + GxICR(RESCHEDULE_IPI) = RESCHEDULE_GxICR_LV | GxICR_DETECT; + mn10300_ipi_enable(RESCHEDULE_IPI); + +#ifdef CONFIG_MN10300_CACHE_ENABLED + GxICR(FLUSH_CACHE_IPI) = FLUSH_CACHE_GxICR_LV | GxICR_DETECT; + mn10300_ipi_enable(FLUSH_CACHE_IPI); +#endif + + mn10300_ipi_shutdown(SMP_BOOT_IRQ); + + /* Set up the non-maskable call function IPI */ + flags = arch_local_cli_save(); + GxICR(CALL_FUNCTION_NMI_IPI) = GxICR_NMI | GxICR_ENABLE | GxICR_DETECT; + tmp16 = GxICR(CALL_FUNCTION_NMI_IPI); + arch_local_irq_restore(flags); +} + +/** + * smp_prepare_cpu_init - Initialise CPU in startup_secondary + * + * Set interrupt level 0-6 setting and init ICR of gdbstub. + */ +void smp_prepare_cpu_init(void) +{ + int loop; + + /* Set the interrupt vector registers */ + IVAR0 = EXCEP_IRQ_LEVEL0; + IVAR1 = EXCEP_IRQ_LEVEL1; + IVAR2 = EXCEP_IRQ_LEVEL2; + IVAR3 = EXCEP_IRQ_LEVEL3; + IVAR4 = EXCEP_IRQ_LEVEL4; + IVAR5 = EXCEP_IRQ_LEVEL5; + IVAR6 = EXCEP_IRQ_LEVEL6; + + /* Disable all interrupts and set to priority 6 (lowest) */ + for (loop = 0; loop < GxICR_NUM_IRQS; loop++) + GxICR(loop) = GxICR_LEVEL_6 | GxICR_DETECT; + +#ifdef CONFIG_GDBSTUB + /* initialise GDB-stub */ + do { + unsigned long flags; + u16 tmp16; + + flags = arch_local_cli_save(); + GxICR(GDB_NMI_IPI) = GxICR_NMI | GxICR_ENABLE | GxICR_DETECT; + tmp16 = GxICR(GDB_NMI_IPI); + arch_local_irq_restore(flags); + } while (0); +#endif +} + +/** + * start_secondary - Activate a secondary CPU (AP) + * @unused: Thread parameter (ignored). + */ +int __init start_secondary(void *unused) +{ + smp_cpu_init(); + + smp_callin(); + while (!cpu_isset(smp_processor_id(), smp_commenced_mask)) + cpu_relax(); + + local_flush_tlb(); + preempt_disable(); + smp_online(); + + cpu_idle(); + return 0; +} + +/** + * smp_prepare_cpus - Boot up secondary CPUs (APs) + * @max_cpus: Maximum number of CPUs to boot. + * + * Call do_boot_cpu, and boot up APs. + */ +void __init smp_prepare_cpus(unsigned int max_cpus) +{ + int phy_id; + + /* Setup boot CPU information */ + smp_store_cpu_info(0); + smp_tune_scheduling(); + + init_ipi(); + + /* If SMP should be disabled, then finish */ + if (max_cpus == 0) { + printk(KERN_INFO "SMP mode deactivated.\n"); + goto smp_done; + } + + /* Boot secondary CPUs (for which phy_id > 0) */ + for (phy_id = 0; phy_id < NR_CPUS; phy_id++) { + /* Don't boot primary CPU */ + if (max_cpus <= cpucount + 1) + continue; + if (phy_id != 0) + do_boot_cpu(phy_id); + set_cpu_possible(phy_id, true); + smp_show_cpu_info(phy_id); + } + +smp_done: + Dprintk("Boot done.\n"); +} + +/** + * smp_store_cpu_info - Save a CPU's information + * @cpu: The CPU to save for. + * + * Save boot_cpu_data and jiffy for the specified CPU. + */ +static void __init smp_store_cpu_info(int cpu) +{ + struct mn10300_cpuinfo *ci = &cpu_data[cpu]; + + *ci = boot_cpu_data; + ci->loops_per_jiffy = loops_per_jiffy; + ci->type = CPUREV; +} + +/** + * smp_tune_scheduling - Set time slice value + * + * Nothing to do here. + */ +static void __init smp_tune_scheduling(void) +{ +} + +/** + * do_boot_cpu: Boot up one CPU + * @phy_id: Physical ID of CPU to boot. + * + * Send an IPI to a secondary CPU to boot it. Returns 0 on success, 1 + * otherwise. + */ +static int __init do_boot_cpu(int phy_id) +{ + struct task_struct *idle; + unsigned long send_status, callin_status; + int timeout, cpu_id; + + send_status = GxICR_REQUEST; + callin_status = 0; + timeout = 0; + cpu_id = phy_id; + + cpucount++; + + /* Create idle thread for this CPU */ + idle = fork_idle(cpu_id); + if (IS_ERR(idle)) + panic("Failed fork for CPU#%d.", cpu_id); + + idle->thread.pc = (unsigned long)start_secondary; + + printk(KERN_NOTICE "Booting CPU#%d\n", cpu_id); + start_stack[cpu_id - 1] = idle->thread.sp; + + task_thread_info(idle)->cpu = cpu_id; + + /* Send boot IPI to AP */ + send_IPI_mask(cpumask_of(phy_id), SMP_BOOT_IRQ); + + Dprintk("Waiting for send to finish...\n"); + + /* Wait for AP's IPI receive in 100[ms] */ + do { + udelay(1000); + send_status = + CROSS_GxICR(SMP_BOOT_IRQ, phy_id) & GxICR_REQUEST; + } while (send_status == GxICR_REQUEST && timeout++ < 100); + + Dprintk("Waiting for cpu_callin_map.\n"); + + if (send_status == 0) { + /* Allow AP to start initializing */ + cpu_set(cpu_id, cpu_callout_map); + + /* Wait for setting cpu_callin_map */ + timeout = 0; + do { + udelay(1000); + callin_status = cpu_isset(cpu_id, cpu_callin_map); + } while (callin_status == 0 && timeout++ < 5000); + + if (callin_status == 0) + Dprintk("Not responding.\n"); + } else { + printk(KERN_WARNING "IPI not delivered.\n"); + } + + if (send_status == GxICR_REQUEST || callin_status == 0) { + cpu_clear(cpu_id, cpu_callout_map); + cpu_clear(cpu_id, cpu_callin_map); + cpu_clear(cpu_id, cpu_initialized); + cpucount--; + return 1; + } + return 0; +} + +/** + * smp_show_cpu_info - Show SMP CPU information + * @cpu: The CPU of interest. + */ +static void __init smp_show_cpu_info(int cpu) +{ + struct mn10300_cpuinfo *ci = &cpu_data[cpu]; + + printk(KERN_INFO + "CPU#%d : ioclk speed: %lu.%02luMHz : bogomips : %lu.%02lu\n", + cpu, + MN10300_IOCLK / 1000000, + (MN10300_IOCLK / 10000) % 100, + ci->loops_per_jiffy / (500000 / HZ), + (ci->loops_per_jiffy / (5000 / HZ)) % 100); +} + +/** + * smp_callin - Set cpu_callin_map of the current CPU ID + */ +static void __init smp_callin(void) +{ + unsigned long timeout; + int cpu; + + cpu = smp_processor_id(); + timeout = jiffies + (2 * HZ); + + if (cpu_isset(cpu, cpu_callin_map)) { + printk(KERN_ERR "CPU#%d already present.\n", cpu); + BUG(); + } + Dprintk("CPU#%d waiting for CALLOUT\n", cpu); + + /* Wait for AP startup 2s total */ + while (time_before(jiffies, timeout)) { + if (cpu_isset(cpu, cpu_callout_map)) + break; + cpu_relax(); + } + + if (!time_before(jiffies, timeout)) { + printk(KERN_ERR + "BUG: CPU#%d started up but did not get a callout!\n", + cpu); + BUG(); + } + +#ifdef CONFIG_CALIBRATE_DELAY + calibrate_delay(); /* Get our bogomips */ +#endif + + /* Save our processor parameters */ + smp_store_cpu_info(cpu); + + /* Allow the boot processor to continue */ + cpu_set(cpu, cpu_callin_map); +} + +/** + * smp_online - Set cpu_online_map + */ +static void __init smp_online(void) +{ + int cpu; + + cpu = smp_processor_id(); + + local_irq_enable(); + + cpu_set(cpu, cpu_online_map); + smp_wmb(); +} + +/** + * smp_cpus_done - + * @max_cpus: Maximum CPU count. + * + * Do nothing. + */ +void __init smp_cpus_done(unsigned int max_cpus) +{ +} + +/* + * smp_prepare_boot_cpu - Set up stuff for the boot processor. + * + * Set up the cpu_online_map, cpu_callout_map and cpu_callin_map of the boot + * processor (CPU 0). + */ +void __devinit smp_prepare_boot_cpu(void) +{ + cpu_set(0, cpu_callout_map); + cpu_set(0, cpu_callin_map); + current_thread_info()->cpu = 0; +} + +/* + * initialize_secondary - Initialise a secondary CPU (Application Processor). + * + * Set SP register and jump to thread's PC address. + */ +void initialize_secondary(void) +{ + asm volatile ( + "mov %0,sp \n" + "jmp (%1) \n" + : + : "a"(current->thread.sp), "a"(current->thread.pc)); +} + +/** + * __cpu_up - Set smp_commenced_mask for the nominated CPU + * @cpu: The target CPU. + */ +int __devinit __cpu_up(unsigned int cpu) +{ + int timeout; + +#ifdef CONFIG_HOTPLUG_CPU + if (num_online_cpus() == 1) + disable_hlt(); + if (sleep_mode[cpu]) + run_wakeup_cpu(cpu); +#endif /* CONFIG_HOTPLUG_CPU */ + + cpu_set(cpu, smp_commenced_mask); + + /* Wait 5s total for a response */ + for (timeout = 0 ; timeout < 5000 ; timeout++) { + if (cpu_isset(cpu, cpu_online_map)) + break; + udelay(1000); + } + + BUG_ON(!cpu_isset(cpu, cpu_online_map)); + return 0; +} + +/** + * setup_profiling_timer - Set up the profiling timer + * @multiplier - The frequency multiplier to use + * + * The frequency of the profiling timer can be changed by writing a multiplier + * value into /proc/profile. + */ +int setup_profiling_timer(unsigned int multiplier) +{ + return -EINVAL; +} + +/* + * CPU hotplug routines + */ +#ifdef CONFIG_HOTPLUG_CPU + +static DEFINE_PER_CPU(struct cpu, cpu_devices); + +static int __init topology_init(void) +{ + int cpu, ret; + + for_each_cpu(cpu) { + ret = register_cpu(&per_cpu(cpu_devices, cpu), cpu, NULL); + if (ret) + printk(KERN_WARNING + "topology_init: register_cpu %d failed (%d)\n", + cpu, ret); + } + return 0; +} + +subsys_initcall(topology_init); + +int __cpu_disable(void) +{ + int cpu = smp_processor_id(); + if (cpu == 0) + return -EBUSY; + + migrate_irqs(); + cpu_clear(cpu, current->active_mm->cpu_vm_mask); + return 0; +} + +void __cpu_die(unsigned int cpu) +{ + run_sleep_cpu(cpu); + + if (num_online_cpus() == 1) + enable_hlt(); +} + +#ifdef CONFIG_MN10300_CACHE_ENABLED +static inline void hotplug_cpu_disable_cache(void) +{ + int tmp; + asm volatile( + " movhu (%1),%0 \n" + " and %2,%0 \n" + " movhu %0,(%1) \n" + "1: movhu (%1),%0 \n" + " btst %3,%0 \n" + " bne 1b \n" + : "=&r"(tmp) + : "a"(&CHCTR), + "i"(~(CHCTR_ICEN | CHCTR_DCEN)), + "i"(CHCTR_ICBUSY | CHCTR_DCBUSY) + : "memory", "cc"); +} + +static inline void hotplug_cpu_enable_cache(void) +{ + int tmp; + asm volatile( + "movhu (%1),%0 \n" + "or %2,%0 \n" + "movhu %0,(%1) \n" + : "=&r"(tmp) + : "a"(&CHCTR), + "i"(CHCTR_ICEN | CHCTR_DCEN) + : "memory", "cc"); +} + +static inline void hotplug_cpu_invalidate_cache(void) +{ + int tmp; + asm volatile ( + "movhu (%1),%0 \n" + "or %2,%0 \n" + "movhu %0,(%1) \n" + : "=&r"(tmp) + : "a"(&CHCTR), + "i"(CHCTR_ICINV | CHCTR_DCINV) + : "cc"); +} + +#else /* CONFIG_MN10300_CACHE_ENABLED */ +#define hotplug_cpu_disable_cache() do {} while (0) +#define hotplug_cpu_enable_cache() do {} while (0) +#define hotplug_cpu_invalidate_cache() do {} while (0) +#endif /* CONFIG_MN10300_CACHE_ENABLED */ + +/** + * hotplug_cpu_nmi_call_function - Call a function on other CPUs for hotplug + * @cpumask: List of target CPUs. + * @func: The function to call on those CPUs. + * @info: The context data for the function to be called. + * @wait: Whether to wait for the calls to complete. + * + * Non-maskably call a function on another CPU for hotplug purposes. + * + * This function must be called with maskable interrupts disabled. + */ +static int hotplug_cpu_nmi_call_function(cpumask_t cpumask, + smp_call_func_t func, void *info, + int wait) +{ + /* + * The address and the size of nmi_call_func_mask_data + * need to be aligned on L1_CACHE_BYTES. + */ + static struct nmi_call_data_struct nmi_call_func_mask_data + __cacheline_aligned; + unsigned long start, end; + + start = (unsigned long)&nmi_call_func_mask_data; + end = start + sizeof(struct nmi_call_data_struct); + + nmi_call_func_mask_data.func = func; + nmi_call_func_mask_data.info = info; + nmi_call_func_mask_data.started = cpumask; + nmi_call_func_mask_data.wait = wait; + if (wait) + nmi_call_func_mask_data.finished = cpumask; + + spin_lock(&smp_nmi_call_lock); + nmi_call_data = &nmi_call_func_mask_data; + mn10300_local_dcache_flush_range(start, end); + smp_wmb(); + + send_IPI_mask(cpumask, CALL_FUNCTION_NMI_IPI); + + do { + mn10300_local_dcache_inv_range(start, end); + barrier(); + } while (!cpus_empty(nmi_call_func_mask_data.started)); + + if (wait) { + do { + mn10300_local_dcache_inv_range(start, end); + barrier(); + } while (!cpus_empty(nmi_call_func_mask_data.finished)); + } + + spin_unlock(&smp_nmi_call_lock); + return 0; +} + +static void restart_wakeup_cpu(void) +{ + unsigned int cpu = smp_processor_id(); + + cpu_set(cpu, cpu_callin_map); + local_flush_tlb(); + cpu_set(cpu, cpu_online_map); + smp_wmb(); +} + +static void prepare_sleep_cpu(void *unused) +{ + sleep_mode[smp_processor_id()] = 1; + smp_mb(); + mn10300_local_dcache_flush_inv(); + hotplug_cpu_disable_cache(); + hotplug_cpu_invalidate_cache(); +} + +/* when this function called, IE=0, NMID=0. */ +static void sleep_cpu(void *unused) +{ + unsigned int cpu_id = smp_processor_id(); + /* + * CALL_FUNCTION_NMI_IPI for wakeup_cpu() shall not be requested, + * before this cpu goes in SLEEP mode. + */ + do { + smp_mb(); + __sleep_cpu(); + } while (sleep_mode[cpu_id]); + restart_wakeup_cpu(); +} + +static void run_sleep_cpu(unsigned int cpu) +{ + unsigned long flags; + cpumask_t cpumask = cpumask_of(cpu); + + flags = arch_local_cli_save(); + hotplug_cpu_nmi_call_function(cpumask, prepare_sleep_cpu, NULL, 1); + hotplug_cpu_nmi_call_function(cpumask, sleep_cpu, NULL, 0); + udelay(1); /* delay for the cpu to sleep. */ + arch_local_irq_restore(flags); +} + +static void wakeup_cpu(void) +{ + hotplug_cpu_invalidate_cache(); + hotplug_cpu_enable_cache(); + smp_mb(); + sleep_mode[smp_processor_id()] = 0; +} + +static void run_wakeup_cpu(unsigned int cpu) +{ + unsigned long flags; + + flags = arch_local_cli_save(); +#if NR_CPUS == 2 + mn10300_local_dcache_flush_inv(); +#else + /* + * Before waking up the cpu, + * all online cpus should stop and flush D-Cache for global data. + */ +#error not support NR_CPUS > 2, when CONFIG_HOTPLUG_CPU=y. +#endif + hotplug_cpu_nmi_call_function(cpumask_of(cpu), wakeup_cpu, NULL, 1); + arch_local_irq_restore(flags); +} + +#endif /* CONFIG_HOTPLUG_CPU */ diff --git a/arch/mn10300/kernel/switch_to.S b/arch/mn10300/kernel/switch_to.S index 630aad7..b08cb2e 100644 --- a/arch/mn10300/kernel/switch_to.S +++ b/arch/mn10300/kernel/switch_to.S @@ -15,6 +15,9 @@ #include <linux/linkage.h> #include <asm/thread_info.h> #include <asm/cpu-regs.h> +#ifdef CONFIG_SMP +#include <proc/smp-regs.h> +#endif /* CONFIG_SMP */ .text @@ -35,7 +38,14 @@ ENTRY(__switch_to) mov d1,a1 # save prev context +#ifdef CONFIG_SMP + mov (CPUID),a2 + add a2,a2 + add a2,a2 + mov (___frame,a2),d0 +#else /* CONFIG_SMP */ mov (__frame),d0 +#endif /* CONFIG_SMP */ mov d0,(THREAD_FRAME,a0) mov __switch_back,d0 mov d0,(THREAD_PC,a0) @@ -59,7 +69,14 @@ ENTRY(__switch_to) #endif mov (THREAD_FRAME,a1),a2 +#ifdef CONFIG_SMP + mov (CPUID),a0 + add a0,a0 + add a0,a0 + mov a2,(___frame,a0) +#else /* CONFIG_SMP */ mov a2,(__frame) +#endif /* CONFIG_SMP */ mov (THREAD_PC,a1),a2 mov d2,d0 # for ret_from_fork mov d0,a0 # for __switch_to diff --git a/arch/mn10300/kernel/time.c b/arch/mn10300/kernel/time.c index 0b5c856..0cb9bdb 100644 --- a/arch/mn10300/kernel/time.c +++ b/arch/mn10300/kernel/time.c @@ -22,12 +22,7 @@ #include <asm/processor.h> #include <asm/intctl-regs.h> #include <asm/rtc.h> - -#ifdef CONFIG_MN10300_RTC -unsigned long mn10300_ioclk; /* system I/O clock frequency */ -unsigned long mn10300_iobclk; /* system I/O clock frequency */ -unsigned long mn10300_tsc_per_HZ; /* number of ioclks per jiffy */ -#endif /* CONFIG_MN10300_RTC */ +#include "internal.h" static unsigned long mn10300_last_tsc; /* time-stamp counter at last time * interrupt occurred */ @@ -95,6 +90,19 @@ static void __init mn10300_sched_clock_init(void) __muldiv64u(NSEC_PER_SEC, 1 << 16, MN10300_TSCCLK); } +/** + * local_timer_interrupt - Local timer interrupt handler + * + * Handle local timer interrupts for this CPU. They may have been propagated + * to this CPU from the CPU that actually gets them by way of an IPI. + */ +irqreturn_t local_timer_interrupt(void) +{ + profile_tick(CPU_PROFILING); + update_process_times(user_mode(get_irq_regs())); + return IRQ_HANDLED; +} + /* * advance the kernel's time keeping clocks (xtime and jiffies) * - we use Timer 0 & 1 cascaded as a clock to nudge us the next time @@ -103,6 +111,7 @@ static void __init mn10300_sched_clock_init(void) static irqreturn_t timer_interrupt(int irq, void *dev_id) { unsigned tsc, elapse; + irqreturn_t ret; write_seqlock(&xtime_lock); @@ -114,15 +123,16 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id) mn10300_last_tsc -= MN10300_TSC_PER_HZ; /* advance the kernel's time tracking system */ - profile_tick(CPU_PROFILING); do_timer(1); } write_sequnlock(&xtime_lock); - update_process_times(user_mode(get_irq_regs())); - - return IRQ_HANDLED; + ret = local_timer_interrupt(); +#ifdef CONFIG_SMP + send_IPI_allbutself(LOCAL_TIMER_IPI); +#endif + return ret; } /* @@ -148,7 +158,7 @@ void __init time_init(void) /* use timer 0 & 1 cascaded to tick at as close to HZ as possible */ setup_irq(TMJCIRQ, &timer_irq); - set_intr_level(TMJCIRQ, TMJCICR_LEVEL); + set_intr_level(TMJCIRQ, NUM2GxICR_LEVEL(CONFIG_TIMER_IRQ_LEVEL)); startup_jiffies_counter(); diff --git a/arch/mn10300/kernel/traps.c b/arch/mn10300/kernel/traps.c index 716a221..c924a1d 100644 --- a/arch/mn10300/kernel/traps.c +++ b/arch/mn10300/kernel/traps.c @@ -45,8 +45,13 @@ #error "INTERRUPT_VECTOR_BASE not aligned to 16MiB boundary!" #endif +#ifdef CONFIG_SMP +struct pt_regs *___frame[NR_CPUS]; /* current frame pointer */ +EXPORT_SYMBOL(___frame); +#else /* CONFIG_SMP */ struct pt_regs *__frame; /* current frame pointer */ EXPORT_SYMBOL(__frame); +#endif /* CONFIG_SMP */ int kstack_depth_to_print = 24; @@ -221,11 +226,14 @@ void show_registers_only(struct pt_regs *regs) printk(KERN_EMERG "threadinfo=%p task=%p)\n", current_thread_info(), current); - if ((unsigned long) current >= 0x90000000UL && - (unsigned long) current < 0x94000000UL) + if ((unsigned long) current >= PAGE_OFFSET && + (unsigned long) current < (unsigned long)high_memory) printk(KERN_EMERG "Process %s (pid: %d)\n", current->comm, current->pid); +#ifdef CONFIG_SMP + printk(KERN_EMERG "CPUID: %08x\n", CPUID); +#endif printk(KERN_EMERG "CPUP: %04hx\n", CPUP); printk(KERN_EMERG "TBR: %08x\n", TBR); printk(KERN_EMERG "DEAR: %08x\n", DEAR); @@ -521,8 +529,12 @@ void __init set_intr_stub(enum exception_code code, void *handler) { unsigned long addr; u8 *vector = (u8 *)(CONFIG_INTERRUPT_VECTOR_BASE + code); + unsigned long flags; addr = (unsigned long) handler - (unsigned long) vector; + + flags = arch_local_cli_save(); + vector[0] = 0xdc; /* JMP handler */ vector[1] = addr; vector[2] = addr >> 8; @@ -532,6 +544,8 @@ void __init set_intr_stub(enum exception_code code, void *handler) vector[6] = 0xcb; vector[7] = 0xcb; + arch_local_irq_restore(flags); + #ifndef CONFIG_MN10300_CACHE_SNOOP mn10300_dcache_flush_inv(); mn10300_icache_inv(); diff --git a/arch/mn10300/lib/delay.c b/arch/mn10300/lib/delay.c index fdf6f71..8e7ceb8 100644 --- a/arch/mn10300/lib/delay.c +++ b/arch/mn10300/lib/delay.c @@ -38,14 +38,14 @@ EXPORT_SYMBOL(__delay); */ void __udelay(unsigned long usecs) { - signed long ioclk, stop; + unsigned long start, stop, cnt; /* usecs * CLK / 1E6 */ stop = __muldiv64u(usecs, MN10300_TSCCLK, 1000000); - stop = TMTSCBC - stop; + start = TMTSCBC; do { - ioclk = TMTSCBC; - } while (stop < ioclk); + cnt = start - TMTSCBC; + } while (cnt < stop); } EXPORT_SYMBOL(__udelay); diff --git a/arch/mn10300/mm/fault.c b/arch/mn10300/mm/fault.c index 906e4c8..59c3da4 100644 --- a/arch/mn10300/mm/fault.c +++ b/arch/mn10300/mm/fault.c @@ -39,10 +39,6 @@ void bust_spinlocks(int yes) { if (yes) { oops_in_progress = 1; -#ifdef CONFIG_SMP - /* Many serial drivers do __global_cli() */ - global_irq_lock = 0; -#endif } else { int loglevel_save = console_loglevel; #ifdef CONFIG_VT @@ -334,10 +330,10 @@ no_context: */ out_of_memory: up_read(&mm->mmap_sem); - if ((fault_code & MMUFCR_xFC_ACCESS) != MMUFCR_xFC_ACCESS_USR) - goto no_context; - pagefault_out_of_memory(); - return; + printk(KERN_ALERT "VM: killing process %s\n", tsk->comm); + if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR) + do_exit(SIGKILL); + goto no_context; do_sigbus: up_read(&mm->mmap_sem); diff --git a/arch/mn10300/proc-mn103e010/include/proc/clock.h b/arch/mn10300/proc-mn103e010/include/proc/clock.h index aa23e14..704a819 100644 --- a/arch/mn10300/proc-mn103e010/include/proc/clock.h +++ b/arch/mn10300/proc-mn103e010/include/proc/clock.h @@ -13,6 +13,4 @@ #include <unit/clock.h> -#define MN10300_WDCLK MN10300_IOCLK - #endif /* _ASM_PROC_CLOCK_H */ diff --git a/arch/mn10300/proc-mn103e010/include/proc/intctl-regs.h b/arch/mn10300/proc-mn103e010/include/proc/intctl-regs.h new file mode 100644 index 0000000..f537801 --- /dev/null +++ b/arch/mn10300/proc-mn103e010/include/proc/intctl-regs.h @@ -0,0 +1,29 @@ +#ifndef _ASM_PROC_INTCTL_REGS_H +#define _ASM_PROC_INTCTL_REGS_H + +#ifndef _ASM_INTCTL_REGS_H +# error "please don't include this file directly" +#endif + +/* intr acceptance group reg */ +#define IAGR __SYSREG(0xd4000100, u16) + +/* group number register */ +#define IAGR_GN 0x00fc + +#define __GET_XIRQ_TRIGGER(X, Z) (((Z) >> ((X) * 2)) & 3) + +#define __SET_XIRQ_TRIGGER(X, Y, Z) \ +({ \ + typeof(Z) x = (Z); \ + x &= ~(3 << ((X) * 2)); \ + x |= ((Y) & 3) << ((X) * 2); \ + (Z) = x; \ +}) + +/* external pin intr spec reg */ +#define EXTMD __SYSREG(0xd4000200, u16) +#define GET_XIRQ_TRIGGER(X) __GET_XIRQ_TRIGGER(X, EXTMD) +#define SET_XIRQ_TRIGGER(X, Y) __SET_XIRQ_TRIGGER(X, Y, EXTMD) + +#endif /* _ASM_PROC_INTCTL_REGS_H */ diff --git a/arch/mn10300/proc-mn103e010/proc-init.c b/arch/mn10300/proc-mn103e010/proc-init.c index 0cee787..27b9798 100644 --- a/arch/mn10300/proc-mn103e010/proc-init.c +++ b/arch/mn10300/proc-mn103e010/proc-init.c @@ -11,6 +11,7 @@ #include <linux/kernel.h> #include <asm/fpu.h> #include <asm/rtc.h> +#include <asm/busctl-regs.h> /* * initialise the on-silicon processor peripherals @@ -75,3 +76,37 @@ asmlinkage void __init processor_init(void) calibrate_clock(); } + +/* + * determine the memory size and base from the memory controller regs + */ +void __init get_mem_info(unsigned long *mem_base, unsigned long *mem_size) +{ + unsigned long base, size; + + *mem_base = 0; + *mem_size = 0; + + base = SDBASE(0); + if (base & SDBASE_CE) { + size = (base & SDBASE_CBAM) << SDBASE_CBAM_SHIFT; + size = ~size + 1; + base &= SDBASE_CBA; + + printk(KERN_INFO "SDRAM[0]: %luMb @%08lx\n", size >> 20, base); + *mem_size += size; + *mem_base = base; + } + + base = SDBASE(1); + if (base & SDBASE_CE) { + size = (base & SDBASE_CBAM) << SDBASE_CBAM_SHIFT; + size = ~size + 1; + base &= SDBASE_CBA; + + printk(KERN_INFO "SDRAM[1]: %luMb @%08lx\n", size >> 20, base); + *mem_size += size; + if (*mem_base == 0) + *mem_base = base; + } +} diff --git a/arch/mn10300/proc-mn2ws0050/Makefile b/arch/mn10300/proc-mn2ws0050/Makefile new file mode 100644 index 0000000..d4ca133 --- /dev/null +++ b/arch/mn10300/proc-mn2ws0050/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the linux kernel. +# + +obj-y := proc-init.o diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/cache.h b/arch/mn10300/proc-mn2ws0050/include/proc/cache.h new file mode 100644 index 0000000..cafd7b5 --- /dev/null +++ b/arch/mn10300/proc-mn2ws0050/include/proc/cache.h @@ -0,0 +1,48 @@ +/* Cache specification + * + * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * Modified by Matsushita Electric Industrial Co., Ltd. + * Modifications: + * 13-Nov-2006 MEI Add L1_CACHE_SHIFT_MAX definition. + * 29-Jul-2008 MEI Add define for MN10300_HAS_AREAPURGE_REG. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_PROC_CACHE_H +#define _ASM_PROC_CACHE_H + +/* + * L1 cache + */ +#define L1_CACHE_NWAYS 4 /* number of ways in caches */ +#define L1_CACHE_NENTRIES 128 /* number of entries in each way */ +#define L1_CACHE_BYTES 32 /* bytes per entry */ +#define L1_CACHE_SHIFT 5 /* shift for bytes per entry */ +#define L1_CACHE_WAYDISP 0x1000 /* distance from one way to the next */ + +#define L1_CACHE_TAG_VALID 0x00000001 /* cache tag valid bit */ +#define L1_CACHE_TAG_DIRTY 0x00000008 /* data cache tag dirty bit */ +#define L1_CACHE_TAG_ENTRY 0x00000fe0 /* cache tag entry address mask */ +#define L1_CACHE_TAG_ADDRESS 0xfffff000 /* cache tag line address mask */ + +/* + * specification of the interval between interrupt checking intervals whilst + * managing the cache with the interrupts disabled + */ +#define MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL 4 + +/* + * The size of range at which it becomes more economical to just flush the + * whole cache rather than trying to flush the specified range. + */ +#define MN10300_DCACHE_FLUSH_BORDER \ + +(L1_CACHE_NWAYS * L1_CACHE_NENTRIES * L1_CACHE_BYTES) +#define MN10300_DCACHE_FLUSH_INV_BORDER \ + +(L1_CACHE_NWAYS * L1_CACHE_NENTRIES * L1_CACHE_BYTES) + +#endif /* _ASM_PROC_CACHE_H */ diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/clock.h b/arch/mn10300/proc-mn2ws0050/include/proc/clock.h new file mode 100644 index 0000000..fe4c0a4 --- /dev/null +++ b/arch/mn10300/proc-mn2ws0050/include/proc/clock.h @@ -0,0 +1,20 @@ +/* clock.h: proc-specific clocks + * + * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * Modified by Matsushita Electric Industrial Co., Ltd. + * Modifications: + * 23-Feb-2007 MEI Delete define for watchdog timer. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_PROC_CLOCK_H +#define _ASM_PROC_CLOCK_H + +#include <unit/clock.h> + +#endif /* _ASM_PROC_CLOCK_H */ diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/dmactl-regs.h b/arch/mn10300/proc-mn2ws0050/include/proc/dmactl-regs.h new file mode 100644 index 0000000..4c4319e --- /dev/null +++ b/arch/mn10300/proc-mn2ws0050/include/proc/dmactl-regs.h @@ -0,0 +1,103 @@ +/* MN2WS0050 on-board DMA controller registers + * + * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + */ + +#ifndef _ASM_PROC_DMACTL_REGS_H +#define _ASM_PROC_DMACTL_REGS_H + +#include <asm/cpu-regs.h> + +#ifdef __KERNEL__ + +/* DMA registers */ +#define DMxCTR(N) __SYSREG(0xd4005000+(N*0x100), u32) /* control reg */ +#define DMxCTR_BG 0x0000001f /* transfer request source */ +#define DMxCTR_BG_SOFT 0x00000000 /* - software source */ +#define DMxCTR_BG_SC0TX 0x00000002 /* - serial port 0 transmission */ +#define DMxCTR_BG_SC0RX 0x00000003 /* - serial port 0 reception */ +#define DMxCTR_BG_SC1TX 0x00000004 /* - serial port 1 transmission */ +#define DMxCTR_BG_SC1RX 0x00000005 /* - serial port 1 reception */ +#define DMxCTR_BG_SC2TX 0x00000006 /* - serial port 2 transmission */ +#define DMxCTR_BG_SC2RX 0x00000007 /* - serial port 2 reception */ +#define DMxCTR_BG_TM0UFLOW 0x00000008 /* - timer 0 underflow */ +#define DMxCTR_BG_TM1UFLOW 0x00000009 /* - timer 1 underflow */ +#define DMxCTR_BG_TM2UFLOW 0x0000000a /* - timer 2 underflow */ +#define DMxCTR_BG_TM3UFLOW 0x0000000b /* - timer 3 underflow */ +#define DMxCTR_BG_TM6ACMPCAP 0x0000000c /* - timer 6A compare/capture */ +#define DMxCTR_BG_RYBY 0x0000000d /* - NAND Flash RY/BY request source */ +#define DMxCTR_BG_RMC 0x0000000e /* - remote controller output */ +#define DMxCTR_BG_XIRQ12 0x00000011 /* - XIRQ12 pin interrupt source */ +#define DMxCTR_BG_XIRQ13 0x00000012 /* - XIRQ13 pin interrupt source */ +#define DMxCTR_BG_TCK 0x00000014 /* - tick timer underflow */ +#define DMxCTR_BG_SC4TX 0x00000019 /* - serial port4 transmission */ +#define DMxCTR_BG_SC4RX 0x0000001a /* - serial port4 reception */ +#define DMxCTR_BG_SC5TX 0x0000001b /* - serial port5 transmission */ +#define DMxCTR_BG_SC5RX 0x0000001c /* - serial port5 reception */ +#define DMxCTR_BG_SC6TX 0x0000001d /* - serial port6 transmission */ +#define DMxCTR_BG_SC6RX 0x0000001e /* - serial port6 reception */ +#define DMxCTR_BG_TMSUFLOW 0x0000001f /* - timestamp timer underflow */ +#define DMxCTR_SAM 0x00000060 /* DMA transfer src addr mode */ +#define DMxCTR_SAM_INCR 0x00000000 /* - increment */ +#define DMxCTR_SAM_DECR 0x00000020 /* - decrement */ +#define DMxCTR_SAM_FIXED 0x00000040 /* - fixed */ +#define DMxCTR_DAM 0x00000300 /* DMA transfer dest addr mode */ +#define DMxCTR_DAM_INCR 0x00000000 /* - increment */ +#define DMxCTR_DAM_DECR 0x00000100 /* - decrement */ +#define DMxCTR_DAM_FIXED 0x00000200 /* - fixed */ +#define DMxCTR_UT 0x00006000 /* DMA transfer unit */ +#define DMxCTR_UT_1 0x00000000 /* - 1 byte */ +#define DMxCTR_UT_2 0x00002000 /* - 2 byte */ +#define DMxCTR_UT_4 0x00004000 /* - 4 byte */ +#define DMxCTR_UT_16 0x00006000 /* - 16 byte */ +#define DMxCTR_RRE 0x00008000 /* DMA round robin enable */ +#define DMxCTR_TEN 0x00010000 /* DMA channel transfer enable */ +#define DMxCTR_RQM 0x00060000 /* external request input source mode */ +#define DMxCTR_RQM_FALLEDGE 0x00000000 /* - falling edge */ +#define DMxCTR_RQM_RISEEDGE 0x00020000 /* - rising edge */ +#define DMxCTR_RQM_LOLEVEL 0x00040000 /* - low level */ +#define DMxCTR_RQM_HILEVEL 0x00060000 /* - high level */ +#define DMxCTR_RQF 0x01000000 /* DMA transfer request flag */ +#define DMxCTR_PERR 0x40000000 /* DMA transfer parameter error flag */ +#define DMxCTR_XEND 0x80000000 /* DMA transfer end flag */ + +#define DMxSRC(N) __SYSREG(0xd4005004+(N*0x100), u32) /* control reg */ + +#define DMxDST(N) __SYSREG(0xd4005008+(N*0x100), u32) /* source addr reg */ + +#define DMxSIZ(N) __SYSREG(0xd400500c+(N*0x100), u32) /* dest addr reg */ +#define DMxSIZ_CT 0x000fffff /* number of bytes to transfer */ + +#define DMxCYC(N) __SYSREG(0xd4005010+(N*0x100), u32) /* intermittent size reg */ +#define DMxCYC_CYC 0x000000ff /* number of interrmittent transfers -1 */ + +#define DM0IRQ 16 /* DMA channel 0 complete IRQ */ +#define DM1IRQ 17 /* DMA channel 1 complete IRQ */ +#define DM2IRQ 18 /* DMA channel 2 complete IRQ */ +#define DM3IRQ 19 /* DMA channel 3 complete IRQ */ + +#define DM0ICR GxICR(DM0IRQ) /* DMA channel 0 complete intr ctrl reg */ +#define DM1ICR GxICR(DM0IR1) /* DMA channel 1 complete intr ctrl reg */ +#define DM2ICR GxICR(DM0IR2) /* DMA channel 2 complete intr ctrl reg */ +#define DM3ICR GxICR(DM0IR3) /* DMA channel 3 complete intr ctrl reg */ + +#ifndef __ASSEMBLY__ + +struct mn10300_dmactl_regs { + u32 ctr; + const void *src; + void *dst; + u32 siz; + u32 cyc; +} __attribute__((aligned(0x100))); + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_PROC_DMACTL_REGS_H */ diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/intctl-regs.h b/arch/mn10300/proc-mn2ws0050/include/proc/intctl-regs.h new file mode 100644 index 0000000..a1e9772 --- /dev/null +++ b/arch/mn10300/proc-mn2ws0050/include/proc/intctl-regs.h @@ -0,0 +1,29 @@ +#ifndef _ASM_PROC_INTCTL_REGS_H +#define _ASM_PROC_INTCTL_REGS_H + +#ifndef _ASM_INTCTL_REGS_H +# error "please don't include this file directly" +#endif + +/* intr acceptance group reg */ +#define IAGR __SYSREG(0xd4000100, u16) + +/* group number register */ +#define IAGR_GN 0x003fc + +#define __GET_XIRQ_TRIGGER(X, Z) (((Z) >> ((X) * 2)) & 3) + +#define __SET_XIRQ_TRIGGER(X, Y, Z) \ +({ \ + typeof(Z) x = (Z); \ + x &= ~(3 << ((X) * 2)); \ + x |= ((Y) & 3) << ((X) * 2); \ + (Z) = x; \ +}) + +/* external pin intr spec reg */ +#define EXTMD0 __SYSREG(0xd4000200, u32) +#define GET_XIRQ_TRIGGER(X) __GET_XIRQ_TRIGGER(X, EXTMD0) +#define SET_XIRQ_TRIGGER(X, Y) __SET_XIRQ_TRIGGER(X, Y, EXTMD0) + +#endif /* _ASM_PROC_INTCTL_REGS_H */ diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/irq.h b/arch/mn10300/proc-mn2ws0050/include/proc/irq.h new file mode 100644 index 0000000..37777a8 --- /dev/null +++ b/arch/mn10300/proc-mn2ws0050/include/proc/irq.h @@ -0,0 +1,49 @@ +/* MN2WS0050 on-board interrupt controller registers + * + * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * Modified by Matsushita Electric Industrial Co., Ltd. + * Modifications: + * 13-Nov-2006 MEI Define extended IRQ number for SMP support. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _PROC_IRQ_H +#define _PROC_IRQ_H + +#ifdef __KERNEL__ + +#define GxICR_NUM_IRQS 163 +#ifdef CONFIG_SMP +#define GxICR_NUM_EXT_IRQS 197 +#endif /* CONFIG_SMP */ + +#define GxICR_NUM_XIRQS 16 + +#define XIRQ0 34 +#define XIRQ1 35 +#define XIRQ2 36 +#define XIRQ3 37 +#define XIRQ4 38 +#define XIRQ5 39 +#define XIRQ6 40 +#define XIRQ7 41 +#define XIRQ8 42 +#define XIRQ9 43 +#define XIRQ10 44 +#define XIRQ11 45 +#define XIRQ12 46 +#define XIRQ13 47 +#define XIRQ14 48 +#define XIRQ15 49 + +#define XIRQ2IRQ(num) (XIRQ0 + num) + +#endif /* __KERNEL__ */ + +#endif /* _PROC_IRQ_H */ diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/nand-regs.h b/arch/mn10300/proc-mn2ws0050/include/proc/nand-regs.h new file mode 100644 index 0000000..84448f3 --- /dev/null +++ b/arch/mn10300/proc-mn2ws0050/include/proc/nand-regs.h @@ -0,0 +1,120 @@ +/* NAND flash interface register definitions + * + * Copyright (C) 2008-2009 Panasonic Corporation + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _PROC_NAND_REGS_H_ +#define _PROC_NAND_REGS_H_ + +/* command register */ +#define FCOMMAND_0 __SYSREG(0xd8f00000, u8) /* fcommand[24:31] */ +#define FCOMMAND_1 __SYSREG(0xd8f00001, u8) /* fcommand[16:23] */ +#define FCOMMAND_2 __SYSREG(0xd8f00002, u8) /* fcommand[8:15] */ +#define FCOMMAND_3 __SYSREG(0xd8f00003, u8) /* fcommand[0:7] */ + +/* for dma 16 byte trans, use FCOMMAND2 register */ +#define FCOMMAND2_0 __SYSREG(0xd8f00110, u8) /* fcommand2[24:31] */ +#define FCOMMAND2_1 __SYSREG(0xd8f00111, u8) /* fcommand2[16:23] */ +#define FCOMMAND2_2 __SYSREG(0xd8f00112, u8) /* fcommand2[8:15] */ +#define FCOMMAND2_3 __SYSREG(0xd8f00113, u8) /* fcommand2[0:7] */ + +#define FCOMMAND_FIEN 0x80 /* nand flash I/F enable */ +#define FCOMMAND_BW_8BIT 0x00 /* 8bit bus width */ +#define FCOMMAND_BW_16BIT 0x40 /* 16bit bus width */ +#define FCOMMAND_BLOCKSZ_SMALL 0x00 /* small block */ +#define FCOMMAND_BLOCKSZ_LARGE 0x20 /* large block */ +#define FCOMMAND_DMASTART 0x10 /* dma start */ +#define FCOMMAND_RYBY 0x08 /* ready/busy flag */ +#define FCOMMAND_RYBYINTMSK 0x04 /* mask ready/busy interrupt */ +#define FCOMMAND_XFWP 0x02 /* write protect enable */ +#define FCOMMAND_XFCE 0x01 /* flash device disable */ +#define FCOMMAND_SEQKILL 0x10 /* stop seq-read */ +#define FCOMMAND_ANUM 0x07 /* address cycle */ +#define FCOMMAND_ANUM_NONE 0x00 /* address cycle none */ +#define FCOMMAND_ANUM_1CYC 0x01 /* address cycle 1cycle */ +#define FCOMMAND_ANUM_2CYC 0x02 /* address cycle 2cycle */ +#define FCOMMAND_ANUM_3CYC 0x03 /* address cycle 3cycle */ +#define FCOMMAND_ANUM_4CYC 0x04 /* address cycle 4cycle */ +#define FCOMMAND_ANUM_5CYC 0x05 /* address cycle 5cycle */ +#define FCOMMAND_FCMD_READ0 0x00 /* read1 command */ +#define FCOMMAND_FCMD_SEQIN 0x80 /* page program 1st command */ +#define FCOMMAND_FCMD_PAGEPROG 0x10 /* page program 2nd command */ +#define FCOMMAND_FCMD_RESET 0xff /* reset command */ +#define FCOMMAND_FCMD_ERASE1 0x60 /* erase 1st command */ +#define FCOMMAND_FCMD_ERASE2 0xd0 /* erase 2nd command */ +#define FCOMMAND_FCMD_STATUS 0x70 /* read status command */ +#define FCOMMAND_FCMD_READID 0x90 /* read id command */ +#define FCOMMAND_FCMD_READOOB 0x50 /* read3 command */ +/* address register */ +#define FADD __SYSREG(0xd8f00004, u32) +/* address register 2 */ +#define FADD2 __SYSREG(0xd8f00008, u32) +/* error judgement register */ +#define FJUDGE __SYSREG(0xd8f0000c, u32) +#define FJUDGE_NOERR 0x0 /* no error */ +#define FJUDGE_1BITERR 0x1 /* 1bit error in data area */ +#define FJUDGE_PARITYERR 0x2 /* parity error */ +#define FJUDGE_UNCORRECTABLE 0x3 /* uncorrectable error */ +#define FJUDGE_ERRJDG_MSK 0x3 /* mask of judgement result */ +/* 1st ECC store register */ +#define FECC11 __SYSREG(0xd8f00010, u32) +/* 2nd ECC store register */ +#define FECC12 __SYSREG(0xd8f00014, u32) +/* 3rd ECC store register */ +#define FECC21 __SYSREG(0xd8f00018, u32) +/* 4th ECC store register */ +#define FECC22 __SYSREG(0xd8f0001c, u32) +/* 5th ECC store register */ +#define FECC31 __SYSREG(0xd8f00020, u32) +/* 6th ECC store register */ +#define FECC32 __SYSREG(0xd8f00024, u32) +/* 7th ECC store register */ +#define FECC41 __SYSREG(0xd8f00028, u32) +/* 8th ECC store register */ +#define FECC42 __SYSREG(0xd8f0002c, u32) +/* data register */ +#define FDATA __SYSREG(0xd8f00030, u32) +/* access pulse register */ +#define FPWS __SYSREG(0xd8f00100, u32) +#define FPWS_PWS1W_2CLK 0x00000000 /* write pulse width 1clock */ +#define FPWS_PWS1W_3CLK 0x01000000 /* write pulse width 2clock */ +#define FPWS_PWS1W_4CLK 0x02000000 /* write pulse width 4clock */ +#define FPWS_PWS1W_5CLK 0x03000000 /* write pulse width 5clock */ +#define FPWS_PWS1W_6CLK 0x04000000 /* write pulse width 6clock */ +#define FPWS_PWS1W_7CLK 0x05000000 /* write pulse width 7clock */ +#define FPWS_PWS1W_8CLK 0x06000000 /* write pulse width 8clock */ +#define FPWS_PWS1R_3CLK 0x00010000 /* read pulse width 3clock */ +#define FPWS_PWS1R_4CLK 0x00020000 /* read pulse width 4clock */ +#define FPWS_PWS1R_5CLK 0x00030000 /* read pulse width 5clock */ +#define FPWS_PWS1R_6CLK 0x00040000 /* read pulse width 6clock */ +#define FPWS_PWS1R_7CLK 0x00050000 /* read pulse width 7clock */ +#define FPWS_PWS1R_8CLK 0x00060000 /* read pulse width 8clock */ +#define FPWS_PWS2W_2CLK 0x00000100 /* write pulse interval 2clock */ +#define FPWS_PWS2W_3CLK 0x00000200 /* write pulse interval 3clock */ +#define FPWS_PWS2W_4CLK 0x00000300 /* write pulse interval 4clock */ +#define FPWS_PWS2W_5CLK 0x00000400 /* write pulse interval 5clock */ +#define FPWS_PWS2W_6CLK 0x00000500 /* write pulse interval 6clock */ +#define FPWS_PWS2R_2CLK 0x00000001 /* read pulse interval 2clock */ +#define FPWS_PWS2R_3CLK 0x00000002 /* read pulse interval 3clock */ +#define FPWS_PWS2R_4CLK 0x00000003 /* read pulse interval 4clock */ +#define FPWS_PWS2R_5CLK 0x00000004 /* read pulse interval 5clock */ +#define FPWS_PWS2R_6CLK 0x00000005 /* read pulse interval 6clock */ +/* command register 2 */ +#define FCOMMAND2 __SYSREG(0xd8f00110, u32) +/* transfer frequency register */ +#define FNUM __SYSREG(0xd8f00114, u32) +#define FSDATA_ADDR 0xd8f00400 +/* active data register */ +#define FSDATA __SYSREG(FSDATA_ADDR, u32) + +#endif /* _PROC_NAND_REGS_H_ */ diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/proc.h b/arch/mn10300/proc-mn2ws0050/include/proc/proc.h new file mode 100644 index 0000000..90d5cad --- /dev/null +++ b/arch/mn10300/proc-mn2ws0050/include/proc/proc.h @@ -0,0 +1,18 @@ +/* proc.h: MN2WS0050 processor description + * + * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_PROC_PROC_H +#define _ASM_PROC_PROC_H + +#define PROCESSOR_VENDOR_NAME "Panasonic" +#define PROCESSOR_MODEL_NAME "mn2ws0050" + +#endif /* _ASM_PROC_PROC_H */ diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/smp-regs.h b/arch/mn10300/proc-mn2ws0050/include/proc/smp-regs.h new file mode 100644 index 0000000..22f277f --- /dev/null +++ b/arch/mn10300/proc-mn2ws0050/include/proc/smp-regs.h @@ -0,0 +1,51 @@ +/* MN10300/AM33v2 Microcontroller SMP registers + * + * Copyright (C) 2006 Matsushita Electric Industrial Co., Ltd. + * All Rights Reserved. + * Created: + * 13-Nov-2006 MEI Add extended cache and atomic operation register + * for SMP support. + * 23-Feb-2007 MEI Add define for gdbstub SMP. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_PROC_SMP_REGS_H +#define _ASM_PROC_SMP_REGS_H + +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ +#include <linux/types.h> +#endif +#include <asm/cpu-regs.h> + +/* + * Reference to the interrupt controllers of other CPUs + */ +#define CROSS_ICR_CPU_SHIFT 16 + +#define CROSS_GxICR(X, CPU) __SYSREG(0xc4000000 + (X) * 4 + \ + ((X) >= 64 && (X) < 192) * 0xf00 + ((CPU) << CROSS_ICR_CPU_SHIFT), u16) +#define CROSS_GxICR_u8(X, CPU) __SYSREG(0xc4000000 + (X) * 4 + \ + (((X) >= 64) && ((X) < 192)) * 0xf00 + ((CPU) << CROSS_ICR_CPU_SHIFT), u8) + +/* CPU ID register */ +#define CPUID __SYSREGC(0xc0000054, u32) +#define CPUID_MASK 0x00000007 /* CPU ID mask */ + +/* extended cache control register */ +#define ECHCTR __SYSREG(0xc0000c20, u32) +#define ECHCTR_IBCM 0x00000001 /* instruction cache broad cast mask */ +#define ECHCTR_DBCM 0x00000002 /* data cache broad cast mask */ +#define ECHCTR_ISPM 0x00000004 /* instruction cache snoop mask */ +#define ECHCTR_DSPM 0x00000008 /* data cache snoop mask */ + +#define NMIAGR __SYSREG(0xd400013c, u16) +#define NMIAGR_GN 0x03fc + +#endif /* __KERNEL__ */ +#endif /* _ASM_PROC_SMP_REGS_H */ diff --git a/arch/mn10300/proc-mn2ws0050/proc-init.c b/arch/mn10300/proc-mn2ws0050/proc-init.c new file mode 100644 index 0000000..c58249b --- /dev/null +++ b/arch/mn10300/proc-mn2ws0050/proc-init.c @@ -0,0 +1,134 @@ +/* MN2WS0050 processor initialisation + * + * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/interrupt.h> + +#include <asm/processor.h> +#include <asm/system.h> +#include <asm/uaccess.h> +#include <asm/io.h> +#include <asm/atomic.h> +#include <asm/smp.h> +#include <asm/pgalloc.h> +#include <asm/busctl-regs.h> +#include <unit/timex.h> +#include <asm/fpu.h> +#include <asm/rtc.h> + +#define MEMCONF __SYSREGC(0xdf800400, u32) + +/* + * initialise the on-silicon processor peripherals + */ +asmlinkage void __init processor_init(void) +{ + int loop; + + /* set up the exception table first */ + for (loop = 0x000; loop < 0x400; loop += 8) + __set_intr_stub(loop, __common_exception); + + __set_intr_stub(EXCEP_ITLBMISS, itlb_miss); + __set_intr_stub(EXCEP_DTLBMISS, dtlb_miss); + __set_intr_stub(EXCEP_IAERROR, itlb_aerror); + __set_intr_stub(EXCEP_DAERROR, dtlb_aerror); + __set_intr_stub(EXCEP_BUSERROR, raw_bus_error); + __set_intr_stub(EXCEP_DOUBLE_FAULT, double_fault); + __set_intr_stub(EXCEP_FPU_DISABLED, fpu_disabled); + __set_intr_stub(EXCEP_SYSCALL0, system_call); + + __set_intr_stub(EXCEP_NMI, nmi_handler); + __set_intr_stub(EXCEP_WDT, nmi_handler); + __set_intr_stub(EXCEP_IRQ_LEVEL0, irq_handler); + __set_intr_stub(EXCEP_IRQ_LEVEL1, irq_handler); + __set_intr_stub(EXCEP_IRQ_LEVEL2, irq_handler); + __set_intr_stub(EXCEP_IRQ_LEVEL3, irq_handler); + __set_intr_stub(EXCEP_IRQ_LEVEL4, irq_handler); + __set_intr_stub(EXCEP_IRQ_LEVEL5, irq_handler); + __set_intr_stub(EXCEP_IRQ_LEVEL6, irq_handler); + + IVAR0 = EXCEP_IRQ_LEVEL0; + IVAR1 = EXCEP_IRQ_LEVEL1; + IVAR2 = EXCEP_IRQ_LEVEL2; + IVAR3 = EXCEP_IRQ_LEVEL3; + IVAR4 = EXCEP_IRQ_LEVEL4; + IVAR5 = EXCEP_IRQ_LEVEL5; + IVAR6 = EXCEP_IRQ_LEVEL6; + +#ifndef CONFIG_MN10300_HAS_CACHE_SNOOP + mn10300_dcache_flush_inv(); + mn10300_icache_inv(); +#endif + + /* disable all interrupts and set to priority 6 (lowest) */ +#ifdef CONFIG_SMP + for (loop = 0; loop < GxICR_NUM_IRQS; loop++) + GxICR(loop) = GxICR_LEVEL_6 | GxICR_DETECT; +#else /* !CONFIG_SMP */ + for (loop = 0; loop < NR_IRQS; loop++) + GxICR(loop) = GxICR_LEVEL_6 | GxICR_DETECT; +#endif /* !CONFIG_SMP */ + + /* clear the timers */ + TM0MD = 0; + TM1MD = 0; + TM2MD = 0; + TM3MD = 0; + TM4MD = 0; + TM5MD = 0; + TM6MD = 0; + TM6MDA = 0; + TM6MDB = 0; + TM7MD = 0; + TM8MD = 0; + TM9MD = 0; + TM10MD = 0; + TM11MD = 0; + TM12MD = 0; + TM13MD = 0; + TM14MD = 0; + TM15MD = 0; + + calibrate_clock(); +} + +/* + * determine the memory size and base from the memory controller regs + */ +void __init get_mem_info(unsigned long *mem_base, unsigned long *mem_size) +{ + unsigned long memconf = MEMCONF; + unsigned long size = 0; /* order: MByte */ + + *mem_base = 0x90000000; /* fixed address */ + + switch (memconf & 0x00000003) { + case 0x01: + size = 256 / 8; /* 256 Mbit per chip */ + break; + case 0x02: + size = 512 / 8; /* 512 Mbit per chip */ + break; + case 0x03: + size = 1024 / 8; /* 1 Gbit per chip */ + break; + default: + panic("Invalid SDRAM size"); + break; + } + + printk(KERN_INFO "DDR2-SDRAM: %luMB x 2 @%08lx\n", size, *mem_base); + + *mem_size = (size * 2) << 20; +} diff --git a/arch/mn10300/unit-asb2303/include/unit/clock.h b/arch/mn10300/unit-asb2303/include/unit/clock.h index 2a0bf79..0316907 100644 --- a/arch/mn10300/unit-asb2303/include/unit/clock.h +++ b/arch/mn10300/unit-asb2303/include/unit/clock.h @@ -14,32 +14,11 @@ #ifndef __ASSEMBLY__ -#ifdef CONFIG_MN10300_RTC - -extern unsigned long mn10300_ioclk; /* IOCLK (crystal speed) in HZ */ -extern unsigned long mn10300_iobclk; -extern unsigned long mn10300_tsc_per_HZ; - -#define MN10300_IOCLK mn10300_ioclk -/* If this processors has a another clock, uncomment the below. */ -/* #define MN10300_IOBCLK mn10300_iobclk */ - -#else /* !CONFIG_MN10300_RTC */ - #define MN10300_IOCLK 33333333UL /* #define MN10300_IOBCLK 66666666UL */ -#endif /* !CONFIG_MN10300_RTC */ - -#define MN10300_JCCLK MN10300_IOCLK -#define MN10300_TSCCLK MN10300_IOCLK - -#ifdef CONFIG_MN10300_RTC -#define MN10300_TSC_PER_HZ mn10300_tsc_per_HZ -#else /* !CONFIG_MN10300_RTC */ -#define MN10300_TSC_PER_HZ (MN10300_TSCCLK/HZ) -#endif /* !CONFIG_MN10300_RTC */ - #endif /* !__ASSEMBLY__ */ +#define MN10300_WDCLK MN10300_IOCLK + #endif /* _ASM_UNIT_CLOCK_H */ diff --git a/arch/mn10300/unit-asb2303/include/unit/serial.h b/arch/mn10300/unit-asb2303/include/unit/serial.h index 047566c..991e356 100644 --- a/arch/mn10300/unit-asb2303/include/unit/serial.h +++ b/arch/mn10300/unit-asb2303/include/unit/serial.h @@ -22,6 +22,11 @@ #define SERIAL_IRQ XIRQ0 /* Dual serial (PC16552) (Hi) */ /* + * The ASB2303 has an 18.432 MHz clock the UART + */ +#define BASE_BAUD (18432000 / 16) + +/* * dispose of the /dev/ttyS0 and /dev/ttyS1 serial ports */ #ifndef CONFIG_GDBSTUB_ON_TTYSx diff --git a/arch/mn10300/unit-asb2303/include/unit/timex.h b/arch/mn10300/unit-asb2303/include/unit/timex.h index 88cd96b..d1b8daf 100644 --- a/arch/mn10300/unit-asb2303/include/unit/timex.h +++ b/arch/mn10300/unit-asb2303/include/unit/timex.h @@ -1,4 +1,4 @@ -/* ASB2303-specific timer specifcations +/* ASB2303-specific timer specifications * * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) @@ -17,6 +17,7 @@ #include <asm/timer-regs.h> #include <unit/clock.h> +#include <asm/param.h> /* * jiffies counter specifications @@ -29,32 +30,43 @@ #define TMJCBR TM01BR #define TMJCIRQ TM1IRQ #define TMJCICR TM1ICR -#define TMJCICR_LEVEL GxICR_LEVEL_5 #ifndef __ASSEMBLY__ +#define MN10300_SRC_IOCLK MN10300_IOCLK + +#ifndef HZ +# error HZ undeclared. +#endif /* !HZ */ +/* use as little prescaling as possible to avoid losing accuracy */ +#if (MN10300_SRC_IOCLK + HZ / 2) / HZ - 1 <= TMJCBR_MAX +# define IOCLK_PRESCALE 1 +# define JC_TIMER_CLKSRC TM0MD_SRC_IOCLK +# define TSC_TIMER_CLKSRC TM4MD_SRC_IOCLK +#elif (MN10300_SRC_IOCLK / 8 + HZ / 2) / HZ - 1 <= TMJCBR_MAX +# define IOCLK_PRESCALE 8 +# define JC_TIMER_CLKSRC TM0MD_SRC_IOCLK_8 +# define TSC_TIMER_CLKSRC TM4MD_SRC_IOCLK_8 +#elif (MN10300_SRC_IOCLK / 32 + HZ / 2) / HZ - 1 <= TMJCBR_MAX +# define IOCLK_PRESCALE 32 +# define JC_TIMER_CLKSRC TM0MD_SRC_IOCLK_32 +# define TSC_TIMER_CLKSRC TM4MD_SRC_IOCLK_32 +#else +# error You lose. +#endif + +#define MN10300_JCCLK (MN10300_SRC_IOCLK / IOCLK_PRESCALE) +#define MN10300_TSCCLK (MN10300_SRC_IOCLK / IOCLK_PRESCALE) + +#define MN10300_JC_PER_HZ ((MN10300_JCCLK + HZ / 2) / HZ) +#define MN10300_TSC_PER_HZ ((MN10300_TSCCLK + HZ / 2) / HZ) + static inline void startup_jiffies_counter(void) { - unsigned rate; u16 md, t16; - /* use as little prescaling as possible to avoid losing accuracy */ - md = TM0MD_SRC_IOCLK; - rate = MN10300_JCCLK / HZ; - - if (rate > TMJCBR_MAX) { - md = TM0MD_SRC_IOCLK_8; - rate = MN10300_JCCLK / 8 / HZ; - - if (rate > TMJCBR_MAX) { - md = TM0MD_SRC_IOCLK_32; - rate = MN10300_JCCLK / 32 / HZ; - - BUG_ON(rate > TMJCBR_MAX); - } - } - - TMJCBR = rate - 1; + md = JC_TIMER_CLKSRC; + TMJCBR = MN10300_JC_PER_HZ - 1; t16 = TMJCBR; TMJCMD = @@ -93,29 +105,39 @@ static inline void shutdown_jiffies_counter(void) static inline void startup_timestamp_counter(void) { + u32 t32; + /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time * - count down from 4Gig-1 to 0 and wrap at IOCLK rate */ TM45BR = TMTSCBR_MAX; + t32 = TM45BR; - TM4MD = TM4MD_SRC_IOCLK; + TM4MD = TSC_TIMER_CLKSRC; TM4MD |= TM4MD_INIT_COUNTER; TM4MD &= ~TM4MD_INIT_COUNTER; TM4ICR = 0; + t32 = TM4ICR; TM5MD = TM5MD_SRC_TM4CASCADE; TM5MD |= TM5MD_INIT_COUNTER; TM5MD &= ~TM5MD_INIT_COUNTER; TM5ICR = 0; + t32 = TM5ICR; TM5MD |= TM5MD_COUNT_ENABLE; TM4MD |= TM4MD_COUNT_ENABLE; + t32 = TM5MD; + t32 = TM4MD; } static inline void shutdown_timestamp_counter(void) { + u8 t8; TM4MD = 0; TM5MD = 0; + t8 = TM4MD; + t8 = TM5MD; } /* diff --git a/arch/mn10300/unit-asb2303/unit-init.c b/arch/mn10300/unit-asb2303/unit-init.c index 70e8cb4..834a76a 100644 --- a/arch/mn10300/unit-asb2303/unit-init.c +++ b/arch/mn10300/unit-asb2303/unit-init.c @@ -31,6 +31,14 @@ asmlinkage void __init unit_init(void) SET_XIRQ_TRIGGER(3, XIRQ_TRIGGER_HILEVEL); SET_XIRQ_TRIGGER(4, XIRQ_TRIGGER_LOWLEVEL); SET_XIRQ_TRIGGER(5, XIRQ_TRIGGER_LOWLEVEL); + +#ifdef CONFIG_EXT_SERIAL_IRQ_LEVEL + set_intr_level(XIRQ0, NUM2GxICR_LEVEL(CONFIG_EXT_SERIAL_IRQ_LEVEL)); +#endif + +#ifdef CONFIG_ETHERNET_IRQ_LEVEL + set_intr_level(XIRQ3, NUM2GxICR_LEVEL(CONFIG_ETHERNET_IRQ_LEVEL)); +#endif } /* @@ -51,7 +59,7 @@ void __init unit_init_IRQ(void) switch (GET_XIRQ_TRIGGER(extnum)) { case XIRQ_TRIGGER_HILEVEL: case XIRQ_TRIGGER_LOWLEVEL: - set_intr_postackable(XIRQ2IRQ(extnum)); + mn10300_set_lateack_irq_type(XIRQ2IRQ(extnum)); break; default: break; diff --git a/arch/mn10300/unit-asb2305/include/unit/clock.h b/arch/mn10300/unit-asb2305/include/unit/clock.h index 67be3f2..29e3425 100644 --- a/arch/mn10300/unit-asb2305/include/unit/clock.h +++ b/arch/mn10300/unit-asb2305/include/unit/clock.h @@ -14,32 +14,11 @@ #ifndef __ASSEMBLY__ -#ifdef CONFIG_MN10300_RTC - -extern unsigned long mn10300_ioclk; /* IOCLK (crystal speed) in HZ */ -extern unsigned long mn10300_iobclk; -extern unsigned long mn10300_tsc_per_HZ; - -#define MN10300_IOCLK mn10300_ioclk -/* If this processors has a another clock, uncomment the below. */ -/* #define MN10300_IOBCLK mn10300_iobclk */ - -#else /* !CONFIG_MN10300_RTC */ - #define MN10300_IOCLK 33333333UL /* #define MN10300_IOBCLK 66666666UL */ -#endif /* !CONFIG_MN10300_RTC */ - -#define MN10300_JCCLK MN10300_IOCLK -#define MN10300_TSCCLK MN10300_IOCLK - -#ifdef CONFIG_MN10300_RTC -#define MN10300_TSC_PER_HZ mn10300_tsc_per_HZ -#else /* !CONFIG_MN10300_RTC */ -#define MN10300_TSC_PER_HZ (MN10300_TSCCLK/HZ) -#endif /* !CONFIG_MN10300_RTC */ - #endif /* !__ASSEMBLY__ */ +#define MN10300_WDCLK MN10300_IOCLK + #endif /* _ASM_UNIT_CLOCK_H */ diff --git a/arch/mn10300/unit-asb2305/include/unit/serial.h b/arch/mn10300/unit-asb2305/include/unit/serial.h index 8086cc0..88c0821 100644 --- a/arch/mn10300/unit-asb2305/include/unit/serial.h +++ b/arch/mn10300/unit-asb2305/include/unit/serial.h @@ -21,6 +21,11 @@ #define SERIAL_IRQ XIRQ0 /* Dual serial (PC16552) (Hi) */ /* + * The ASB2305 has an 18.432 MHz clock the UART + */ +#define BASE_BAUD (18432000 / 16) + +/* * dispose of the /dev/ttyS0 serial port */ #ifndef CONFIG_GDBSTUB_ON_TTYSx diff --git a/arch/mn10300/unit-asb2305/include/unit/timex.h b/arch/mn10300/unit-asb2305/include/unit/timex.h index 0860186..cd8bc14 100644 --- a/arch/mn10300/unit-asb2305/include/unit/timex.h +++ b/arch/mn10300/unit-asb2305/include/unit/timex.h @@ -1,4 +1,4 @@ -/* ASB2305 timer specifcations +/* ASB2305-specific timer specifications * * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) @@ -17,6 +17,7 @@ #include <asm/timer-regs.h> #include <unit/clock.h> +#include <asm/param.h> /* * jiffies counter specifications @@ -29,32 +30,43 @@ #define TMJCBR TM01BR #define TMJCIRQ TM1IRQ #define TMJCICR TM1ICR -#define TMJCICR_LEVEL GxICR_LEVEL_5 #ifndef __ASSEMBLY__ +#define MN10300_SRC_IOCLK MN10300_IOCLK + +#ifndef HZ +# error HZ undeclared. +#endif /* !HZ */ +/* use as little prescaling as possible to avoid losing accuracy */ +#if (MN10300_SRC_IOCLK + HZ / 2) / HZ - 1 <= TMJCBR_MAX +# define IOCLK_PRESCALE 1 +# define JC_TIMER_CLKSRC TM0MD_SRC_IOCLK +# define TSC_TIMER_CLKSRC TM4MD_SRC_IOCLK +#elif (MN10300_SRC_IOCLK / 8 + HZ / 2) / HZ - 1 <= TMJCBR_MAX +# define IOCLK_PRESCALE 8 +# define JC_TIMER_CLKSRC TM0MD_SRC_IOCLK_8 +# define TSC_TIMER_CLKSRC TM4MD_SRC_IOCLK_8 +#elif (MN10300_SRC_IOCLK / 32 + HZ / 2) / HZ - 1 <= TMJCBR_MAX +# define IOCLK_PRESCALE 32 +# define JC_TIMER_CLKSRC TM0MD_SRC_IOCLK_32 +# define TSC_TIMER_CLKSRC TM4MD_SRC_IOCLK_32 +#else +# error You lose. +#endif + +#define MN10300_JCCLK (MN10300_SRC_IOCLK / IOCLK_PRESCALE) +#define MN10300_TSCCLK (MN10300_SRC_IOCLK / IOCLK_PRESCALE) + +#define MN10300_JC_PER_HZ ((MN10300_JCCLK + HZ / 2) / HZ) +#define MN10300_TSC_PER_HZ ((MN10300_TSCCLK + HZ / 2) / HZ) + static inline void startup_jiffies_counter(void) { - unsigned rate; u16 md, t16; - /* use as little prescaling as possible to avoid losing accuracy */ - md = TM0MD_SRC_IOCLK; - rate = MN10300_JCCLK / HZ; - - if (rate > TMJCBR_MAX) { - md = TM0MD_SRC_IOCLK_8; - rate = MN10300_JCCLK / 8 / HZ; - - if (rate > TMJCBR_MAX) { - md = TM0MD_SRC_IOCLK_32; - rate = MN10300_JCCLK / 32 / HZ; - - BUG_ON(rate > TMJCBR_MAX); - } - } - - TMJCBR = rate - 1; + md = JC_TIMER_CLKSRC; + TMJCBR = MN10300_JC_PER_HZ - 1; t16 = TMJCBR; TMJCMD = @@ -93,29 +105,39 @@ static inline void shutdown_jiffies_counter(void) static inline void startup_timestamp_counter(void) { + u32 t32; + /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time * - count down from 4Gig-1 to 0 and wrap at IOCLK rate */ TM45BR = TMTSCBR_MAX; + t32 = TM45BR; - TM4MD = TM4MD_SRC_IOCLK; + TM4MD = TSC_TIMER_CLKSRC; TM4MD |= TM4MD_INIT_COUNTER; TM4MD &= ~TM4MD_INIT_COUNTER; TM4ICR = 0; + t32 = TM4ICR; TM5MD = TM5MD_SRC_TM4CASCADE; TM5MD |= TM5MD_INIT_COUNTER; TM5MD &= ~TM5MD_INIT_COUNTER; TM5ICR = 0; + t32 = TM5ICR; TM5MD |= TM5MD_COUNT_ENABLE; TM4MD |= TM4MD_COUNT_ENABLE; + t32 = TM5MD; + t32 = TM4MD; } static inline void shutdown_timestamp_counter(void) { + u8 t8; TM4MD = 0; TM5MD = 0; + t8 = TM4MD; + t8 = TM5MD; } /* @@ -126,7 +148,7 @@ typedef unsigned long cycles_t; static inline cycles_t read_timestamp_counter(void) { - return (cycles_t) TMTSCBC; + return (cycles_t)TMTSCBC; } #endif /* !__ASSEMBLY__ */ diff --git a/arch/mn10300/unit-asb2305/pci.c b/arch/mn10300/unit-asb2305/pci.c index 6d8720a..a4954fe 100644 --- a/arch/mn10300/unit-asb2305/pci.c +++ b/arch/mn10300/unit-asb2305/pci.c @@ -503,7 +503,7 @@ asmlinkage void __init unit_pci_init(void) struct pci_ops *o = &pci_direct_ampci; u32 x; - set_intr_level(XIRQ1, GxICR_LEVEL_3); + set_intr_level(XIRQ1, NUM2GxICR_LEVEL(CONFIG_PCI_IRQ_LEVEL)); memset(&bus, 0, sizeof(bus)); diff --git a/arch/mn10300/unit-asb2305/unit-init.c b/arch/mn10300/unit-asb2305/unit-init.c index a76c8e0..e1becd6 100644 --- a/arch/mn10300/unit-asb2305/unit-init.c +++ b/arch/mn10300/unit-asb2305/unit-init.c @@ -26,8 +26,10 @@ asmlinkage void __init unit_init(void) { #ifndef CONFIG_GDBSTUB_ON_TTYSx /* set the 16550 interrupt line to level 3 if not being used for GDB */ - set_intr_level(XIRQ0, GxICR_LEVEL_3); +#ifdef CONFIG_EXT_SERIAL_IRQ_LEVEL + set_intr_level(XIRQ0, NUM2GxICR_LEVEL(CONFIG_EXT_SERIAL_IRQ_LEVEL)); #endif +#endif /* CONFIG_GDBSTUB_ON_TTYSx */ } /* @@ -51,7 +53,7 @@ void __init unit_init_IRQ(void) switch (GET_XIRQ_TRIGGER(extnum)) { case XIRQ_TRIGGER_HILEVEL: case XIRQ_TRIGGER_LOWLEVEL: - set_intr_postackable(XIRQ2IRQ(extnum)); + mn10300_set_lateack_irq_type(XIRQ2IRQ(extnum)); break; default: break; diff --git a/arch/mn10300/unit-asb2364/Makefile b/arch/mn10300/unit-asb2364/Makefile new file mode 100644 index 0000000..6dd27d6 --- /dev/null +++ b/arch/mn10300/unit-asb2364/Makefile @@ -0,0 +1,10 @@ +# +# Makefile for the linux kernel. +# +# Note! Dependencies are done automagically by 'make dep', which also +# removes any old dependencies. DON'T put your own dependencies here +# unless it's something special (ie not a .c file). +# +# Note 2! The CFLAGS definitions are now in the main makefile... + +obj-y := unit-init.o leds.o diff --git a/arch/mn10300/unit-asb2364/include/unit/clock.h b/arch/mn10300/unit-asb2364/include/unit/clock.h new file mode 100644 index 0000000..d34ac9a --- /dev/null +++ b/arch/mn10300/unit-asb2364/include/unit/clock.h @@ -0,0 +1,29 @@ +/* clock.h: unit-specific clocks + * + * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * Modified by Matsushita Electric Industrial Co., Ltd. + * Modifications: + * 23-Feb-2007 MEI Add define for watchdog timer. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_UNIT_CLOCK_H +#define _ASM_UNIT_CLOCK_H + +#ifndef __ASSEMBLY__ + +#define MN10300_IOCLK 100000000UL /* for DDR800 */ +/*#define MN10300_IOCLK 83333333UL */ /* for DDR667 */ +#define MN10300_IOBCLK MN10300_IOCLK /* IOBCLK is equal to IOCLK */ + +#endif /* !__ASSEMBLY__ */ + +#define MN10300_WDCLK 27000000UL + +#endif /* _ASM_UNIT_CLOCK_H */ diff --git a/arch/mn10300/unit-asb2364/include/unit/fpga-regs.h b/arch/mn10300/unit-asb2364/include/unit/fpga-regs.h new file mode 100644 index 0000000..a039a50 --- /dev/null +++ b/arch/mn10300/unit-asb2364/include/unit/fpga-regs.h @@ -0,0 +1,50 @@ +/* ASB2364 FPGA registers + */ + +#ifndef _ASM_UNIT_FPGA_REGS_H +#define _ASM_UNIT_FPGA_REGS_H + +#include <asm/cpu-regs.h> + +#ifdef __KERNEL__ + +#define ASB2364_FPGA_REG_RESET_LAN __SYSREG(0xa9001300, u16) +#define ASB2364_FPGA_REG_RESET_UART __SYSREG(0xa9001304, u16) +#define ASB2364_FPGA_REG_RESET_I2C __SYSREG(0xa9001308, u16) +#define ASB2364_FPGA_REG_RESET_USB __SYSREG(0xa900130c, u16) +#define ASB2364_FPGA_REG_RESET_AV __SYSREG(0xa9001310, u16) + +#define ASB2364_FPGA_REG_IRQ_LAN __SYSREG(0xa9001510, u16) +#define ASB2364_FPGA_REG_IRQ_UART __SYSREG(0xa9001514, u16) +#define ASB2364_FPGA_REG_IRQ_I2C __SYSREG(0xa9001518, u16) +#define ASB2364_FPGA_REG_IRQ_USB __SYSREG(0xa900151c, u16) +#define ASB2364_FPGA_REG_IRQ_FPGA __SYSREG(0xa9001524, u16) + +#define ASB2364_FPGA_REG_MASK_LAN __SYSREG(0xa9001590, u16) +#define ASB2364_FPGA_REG_MASK_UART __SYSREG(0xa9001594, u16) +#define ASB2364_FPGA_REG_MASK_I2C __SYSREG(0xa9001598, u16) +#define ASB2364_FPGA_REG_MASK_USB __SYSREG(0xa900159c, u16) +#define ASB2364_FPGA_REG_MASK_FPGA __SYSREG(0xa90015a4, u16) + +#define ASB2364_FPGA_REG_CPLD5_SET1 __SYSREG(0xa9002500, u16) +#define ASB2364_FPGA_REG_CPLD5_SET2 __SYSREG(0xa9002504, u16) +#define ASB2364_FPGA_REG_CPLD6_SET1 __SYSREG(0xa9002600, u16) +#define ASB2364_FPGA_REG_CPLD6_SET2 __SYSREG(0xa9002604, u16) +#define ASB2364_FPGA_REG_CPLD7_SET1 __SYSREG(0xa9002700, u16) +#define ASB2364_FPGA_REG_CPLD7_SET2 __SYSREG(0xa9002704, u16) +#define ASB2364_FPGA_REG_CPLD8_SET1 __SYSREG(0xa9002800, u16) +#define ASB2364_FPGA_REG_CPLD8_SET2 __SYSREG(0xa9002804, u16) +#define ASB2364_FPGA_REG_CPLD9_SET1 __SYSREG(0xa9002900, u16) +#define ASB2364_FPGA_REG_CPLD9_SET2 __SYSREG(0xa9002904, u16) +#define ASB2364_FPGA_REG_CPLD10_SET1 __SYSREG(0xa9002a00, u16) +#define ASB2364_FPGA_REG_CPLD10_SET2 __SYSREG(0xa9002a04, u16) + +#define SyncExBus() \ + do { \ + unsigned short w; \ + w = *(volatile short *)0xa9000000; \ + } while (0) + +#endif /* __KERNEL__ */ + +#endif /* _ASM_UNIT_FPGA_REGS_H */ diff --git a/arch/mn10300/unit-asb2364/include/unit/leds.h b/arch/mn10300/unit-asb2364/include/unit/leds.h new file mode 100644 index 0000000..03a3933 --- /dev/null +++ b/arch/mn10300/unit-asb2364/include/unit/leds.h @@ -0,0 +1,54 @@ +/* Unit-specific leds + * + * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_UNIT_LEDS_H +#define _ASM_UNIT_LEDS_H + +#include <asm/pio-regs.h> +#include <asm/cpu-regs.h> +#include <asm/exceptions.h> + +#define MN10300_USE_7SEGLEDS 0 + +#define ASB2364_7SEGLEDS __SYSREG(0xA9001630, u32) + +/* + * use the 7-segment LEDs to indicate states + */ + +#if MN10300_USE_7SEGLEDS +/* flip the 7-segment LEDs between "Gdb-" and "----" */ +#define mn10300_set_gdbleds(ONOFF) \ + do { \ + ASB2364_7SEGLEDS = (ONOFF) ? 0x8543077f : 0x7f7f7f7f; \ + } while (0) +#else +#define mn10300_set_gdbleds(ONOFF) do {} while (0) +#endif + +#if MN10300_USE_7SEGLEDS +/* indicate double-fault by displaying "db-f" on the LEDs */ +#define mn10300_set_dbfleds \ + mov 0x43077f1d,d0 ; \ + mov d0,(ASB2364_7SEGLEDS) +#else +#define mn10300_set_dbfleds +#endif + +#ifndef __ASSEMBLY__ +extern void peripheral_leds_display_exception(enum exception_code); +extern void peripheral_leds_led_chase(void); +extern void peripheral_leds7x4_display_dec(unsigned int, unsigned int); +extern void peripheral_leds7x4_display_hex(unsigned int, unsigned int); +extern void debug_to_serial(const char *, int); +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_UNIT_LEDS_H */ diff --git a/arch/mn10300/unit-asb2364/include/unit/serial.h b/arch/mn10300/unit-asb2364/include/unit/serial.h new file mode 100644 index 0000000..7f048bb --- /dev/null +++ b/arch/mn10300/unit-asb2364/include/unit/serial.h @@ -0,0 +1,151 @@ +/* Unit-specific 8250 serial ports + * + * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_UNIT_SERIAL_H +#define _ASM_UNIT_SERIAL_H + +#include <asm/cpu-regs.h> +#include <proc/irq.h> +#include <unit/fpga-regs.h> +#include <linux/serial_reg.h> + +#define SERIAL_PORT0_BASE_ADDRESS 0xA8200000 + +#define SERIAL_IRQ XIRQ1 /* single serial (TL16C550C) (Lo) */ + +/* + * The ASB2364 has an 12.288 MHz clock + * for your UART. + * + * It'd be nice if someone built a serial card with a 24.576 MHz + * clock, since the 16550A is capable of handling a top speed of 1.5 + * megabits/second; but this requires the faster clock. + */ +#define BASE_BAUD (12288000 / 16) + +/* + * dispose of the /dev/ttyS0 and /dev/ttyS1 serial ports + */ +#ifndef CONFIG_GDBSTUB_ON_TTYSx + +#define SERIAL_PORT_DFNS \ + { \ + .baud_base = BASE_BAUD, \ + .irq = SERIAL_IRQ, \ + .flags = STD_COM_FLAGS, \ + .iomem_base = (u8 *) SERIAL_PORT0_BASE_ADDRESS, \ + .iomem_reg_shift = 1, \ + .io_type = SERIAL_IO_MEM, \ + }, + +#ifndef __ASSEMBLY__ + +static inline void __debug_to_serial(const char *p, int n) +{ +} + +#endif /* !__ASSEMBLY__ */ + +#else /* CONFIG_GDBSTUB_ON_TTYSx */ + +#define SERIAL_PORT_DFNS /* stolen by gdb-stub */ + +#if defined(CONFIG_GDBSTUB_ON_TTYS0) +#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX * 4, u8) +#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8) +#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8) +#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8) +#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8) +#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8) +#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8) +#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8) +#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8) +#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8) +#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8) +#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8) +#define GDBPORT_SERIAL_IRQ SERIAL_IRQ + +#elif defined(CONFIG_GDBSTUB_ON_TTYS1) +#error The ASB2364 does not have a /dev/ttyS1 +#endif + +#ifndef __ASSEMBLY__ + +static inline void __debug_to_serial(const char *p, int n) +{ + char ch; + +#define LSR_WAIT_FOR(STATE) \ + do {} while (!(GDBPORT_SERIAL_LSR & UART_LSR_##STATE)) +#define FLOWCTL_QUERY(LINE) \ + ({ GDBPORT_SERIAL_MSR & UART_MSR_##LINE; }) +#define FLOWCTL_WAIT_FOR(LINE) \ + do {} while (!(GDBPORT_SERIAL_MSR & UART_MSR_##LINE)) +#define FLOWCTL_CLEAR(LINE) \ + do { GDBPORT_SERIAL_MCR &= ~UART_MCR_##LINE; } while (0) +#define FLOWCTL_SET(LINE) \ + do { GDBPORT_SERIAL_MCR |= UART_MCR_##LINE; } while (0) + + FLOWCTL_SET(DTR); + + for (; n > 0; n--) { + LSR_WAIT_FOR(THRE); + FLOWCTL_WAIT_FOR(CTS); + + ch = *p++; + if (ch == 0x0a) { + GDBPORT_SERIAL_TX = 0x0d; + LSR_WAIT_FOR(THRE); + FLOWCTL_WAIT_FOR(CTS); + } + GDBPORT_SERIAL_TX = ch; + } + + FLOWCTL_CLEAR(DTR); +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* CONFIG_GDBSTUB_ON_TTYSx */ + +#define SERIAL_INITIALIZE \ +do { \ + /* release reset */ \ + ASB2364_FPGA_REG_RESET_UART = 0x0001; \ + SyncExBus(); \ +} while (0) + +#define SERIAL_CHECK_INTERRUPT \ +do { \ + if ((ASB2364_FPGA_REG_IRQ_UART & 0x0001) == 0x0001) { \ + return IRQ_NONE; \ + } \ +} while (0) + +#define SERIAL_CLEAR_INTERRUPT \ +do { \ + ASB2364_FPGA_REG_IRQ_UART = 0x0001; \ + SyncExBus(); \ +} while (0) + +#define SERIAL_SET_INT_MASK \ +do { \ + ASB2364_FPGA_REG_MASK_UART = 0x0001; \ + SyncExBus(); \ +} while (0) + +#define SERIAL_CLEAR_INT_MASK \ +do { \ + ASB2364_FPGA_REG_MASK_UART = 0x0000; \ + SyncExBus(); \ +} while (0) + +#endif /* _ASM_UNIT_SERIAL_H */ diff --git a/arch/mn10300/unit-asb2364/include/unit/timex.h b/arch/mn10300/unit-asb2364/include/unit/timex.h new file mode 100644 index 0000000..b5223f7 --- /dev/null +++ b/arch/mn10300/unit-asb2364/include/unit/timex.h @@ -0,0 +1,125 @@ +/* timex.h: MN2WS0038 architecture timer specifications + * + * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_UNIT_TIMEX_H +#define _ASM_UNIT_TIMEX_H + +#ifndef __ASSEMBLY__ +#include <linux/irq.h> +#endif /* __ASSEMBLY__ */ + +#include <asm/timer-regs.h> +#include <unit/clock.h> +#include <asm/param.h> + +/* + * jiffies counter specifications + */ + +#define TMJCBR_MAX 0xffffff /* 24bit */ +#define TMJCBC TMTBC + +#define TMJCMD TMTMD +#define TMJCBR TMTBR +#define TMJCIRQ TMTIRQ +#define TMJCICR TMTICR + +#ifndef __ASSEMBLY__ + +#define MN10300_SRC_IOBCLK MN10300_IOBCLK + +#ifndef HZ +# error HZ undeclared. +#endif /* !HZ */ + +#define MN10300_JCCLK (MN10300_SRC_IOBCLK) +#define MN10300_TSCCLK (MN10300_SRC_IOBCLK) + +#define MN10300_JC_PER_HZ ((MN10300_JCCLK + HZ / 2) / HZ) +#define MN10300_TSC_PER_HZ ((MN10300_TSCCLK + HZ / 2) / HZ) + +/* Check bit width of MTM interval value that sets base register */ +#if (MN10300_JC_PER_HZ - 1) > TMJCBR_MAX +# error MTM tick timer interval value is overflow. +#endif + + +static inline void startup_jiffies_counter(void) +{ + u32 sync; + + TMJCBR = MN10300_JC_PER_HZ - 1; + sync = TMJCBR; + + TMJCMD = TMTMD_TMTLDE; + TMJCMD = TMTMD_TMTCNE; + sync = TMJCMD; + + TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST; + sync = TMJCICR; +} + +static inline void shutdown_jiffies_counter(void) +{ +} + +#endif /* !__ASSEMBLY__ */ + + +/* + * timestamp counter specifications + */ + +#define TMTSCBR_MAX 0xffffffff +#define TMTSCMD TMSMD +#define TMTSCBR TMSBR +#define TMTSCBC TMSBC +#define TMTSCICR TMSICR + +#ifndef __ASSEMBLY__ + +static inline void startup_timestamp_counter(void) +{ + u32 sync; + + /* set up TMS(Timestamp) 32bit timer register to count real time + * - count down from 4Gig-1 to 0 and wrap at IOBCLK rate + */ + + TMTSCBR = TMTSCBR_MAX; + sync = TMTSCBR; + + TMTSCICR = 0; + sync = TMTSCICR; + + TMTSCMD = TMTMD_TMTLDE; + TMTSCMD = TMTMD_TMTCNE; + sync = TMTSCMD; +} + +static inline void shutdown_timestamp_counter(void) +{ + TMTSCMD = 0; +} + +/* + * we use a cascaded pair of 16-bit down-counting timers to count I/O + * clock cycles for the purposes of time keeping + */ +typedef unsigned long cycles_t; + +static inline cycles_t read_timestamp_counter(void) +{ + return (cycles_t)TMTSCBC; +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_UNIT_TIMEX_H */ diff --git a/arch/mn10300/unit-asb2364/leds.c b/arch/mn10300/unit-asb2364/leds.c new file mode 100644 index 0000000..1ff830c --- /dev/null +++ b/arch/mn10300/unit-asb2364/leds.c @@ -0,0 +1,98 @@ +/* leds.c: ASB2364 peripheral 7seg LEDs x4 support + * + * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/init.h> + +#include <asm/io.h> +#include <asm/processor.h> +#include <asm/intctl-regs.h> +#include <asm/rtc-regs.h> +#include <unit/leds.h> + +#if MN10300_USE_7SEGLEDS +static const u8 asb2364_led_hex_tbl[16] = { + 0x80, 0xf2, 0x48, 0x60, 0x32, 0x24, 0x04, 0xf0, + 0x00, 0x20, 0x10, 0x06, 0x8c, 0x42, 0x0c, 0x1c +}; + +static const u32 asb2364_led_chase_tbl[6] = { + ~0x02020202, /* top - segA */ + ~0x04040404, /* right top - segB */ + ~0x08080808, /* right bottom - segC */ + ~0x10101010, /* bottom - segD */ + ~0x20202020, /* left bottom - segE */ + ~0x40404040, /* left top - segF */ +}; + +static unsigned asb2364_led_chase; + +void peripheral_leds7x4_display_dec(unsigned int val, unsigned int points) +{ + u32 leds; + + leds = asb2364_led_hex_tbl[(val/1000) % 10]; + leds <<= 8; + leds |= asb2364_led_hex_tbl[(val/100) % 10]; + leds <<= 8; + leds |= asb2364_led_hex_tbl[(val/10) % 10]; + leds <<= 8; + leds |= asb2364_led_hex_tbl[val % 10]; + leds |= points^0x01010101; + + ASB2364_7SEGLEDS = leds; +} + +void peripheral_leds7x4_display_hex(unsigned int val, unsigned int points) +{ + u32 leds; + + leds = asb2364_led_hex_tbl[(val/1000) % 10]; + leds <<= 8; + leds |= asb2364_led_hex_tbl[(val/100) % 10]; + leds <<= 8; + leds |= asb2364_led_hex_tbl[(val/10) % 10]; + leds <<= 8; + leds |= asb2364_led_hex_tbl[val % 10]; + leds |= points^0x01010101; + + ASB2364_7SEGLEDS = leds; +} + +/* display triple horizontal bar and exception code */ +void peripheral_leds_display_exception(enum exception_code code) +{ + u32 leds; + + leds = asb2364_led_hex_tbl[(code/0x100) % 0x10]; + leds <<= 8; + leds |= asb2364_led_hex_tbl[(code/0x10) % 0x10]; + leds <<= 8; + leds |= asb2364_led_hex_tbl[code % 0x10]; + leds |= 0x6d010101; + + ASB2364_7SEGLEDS = leds; +} + +void peripheral_leds_led_chase(void) +{ + ASB2364_7SEGLEDS = asb2364_led_chase_tbl[asb2364_led_chase]; + asb2364_led_chase++; + if (asb2364_led_chase >= 6) + asb2364_led_chase = 0; +} +#else /* MN10300_USE_7SEGLEDS */ +void peripheral_leds7x4_display_dec(unsigned int val, unsigned int points) { } +void peripheral_leds7x4_display_hex(unsigned int val, unsigned int points) { } +void peripheral_leds_display_exception(enum exception_code code) { } +void peripheral_leds_led_chase(void) { } +#endif /* MN10300_USE_7SEGLEDS */ diff --git a/arch/mn10300/unit-asb2364/unit-init.c b/arch/mn10300/unit-asb2364/unit-init.c new file mode 100644 index 0000000..a3fc09b --- /dev/null +++ b/arch/mn10300/unit-asb2364/unit-init.c @@ -0,0 +1,85 @@ +/* ASB2364 initialisation + * + * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/delay.h> + +#include <asm/io.h> +#include <asm/setup.h> +#include <asm/processor.h> +#include <asm/irq.h> +#include <asm/intctl-regs.h> + +/* + * initialise some of the unit hardware before gdbstub is set up + */ +asmlinkage void __init unit_init(void) +{ + /* set up the external interrupts */ + + /* XIRQ[0]: NAND RXBY */ + /* SET_XIRQ_TRIGGER(0, XIRQ_TRIGGER_LOWLEVEL); */ + + /* XIRQ[1]: LAN, UART, I2C, USB, PCI, FPGA */ + SET_XIRQ_TRIGGER(1, XIRQ_TRIGGER_LOWLEVEL); + + /* XIRQ[2]: Extend Slot 1-9 */ + /* SET_XIRQ_TRIGGER(2, XIRQ_TRIGGER_LOWLEVEL); */ + +#if defined(CONFIG_EXT_SERIAL_IRQ_LEVEL) && \ + defined(CONFIG_ETHERNET_IRQ_LEVEL) && \ + (CONFIG_EXT_SERIAL_IRQ_LEVEL != CONFIG_ETHERNET_IRQ_LEVEL) +# error CONFIG_EXT_SERIAL_IRQ_LEVEL != CONFIG_ETHERNET_IRQ_LEVEL +#endif + +#if defined(CONFIG_EXT_SERIAL_IRQ_LEVEL) + set_intr_level(XIRQ1, NUM2GxICR_LEVEL(CONFIG_EXT_SERIAL_IRQ_LEVEL)); +#elif defined(CONFIG_ETHERNET_IRQ_LEVEL) + set_intr_level(XIRQ1, NUM2GxICR_LEVEL(CONFIG_ETHERNET_IRQ_LEVEL)); +#endif +} + +/* + * initialise the rest of the unit hardware after gdbstub is ready + */ +asmlinkage void __init unit_setup(void) +{ + +} + +/* + * initialise the external interrupts used by a unit of this type + */ +void __init unit_init_IRQ(void) +{ + unsigned int extnum; + + for (extnum = 0 ; extnum < NR_XIRQS ; extnum++) { + switch (GET_XIRQ_TRIGGER(extnum)) { + /* LEVEL triggered interrupts should be made + * post-ACK'able as they hold their lines until + * serviced + */ + case XIRQ_TRIGGER_HILEVEL: + case XIRQ_TRIGGER_LOWLEVEL: + mn10300_set_lateack_irq_type(XIRQ2IRQ(extnum)); + break; + default: + break; + } + } + +#define IRQCTL __SYSREG(0xd5000090, u32) + IRQCTL |= 0x02; +} |