diff options
48 files changed, 53 insertions, 53 deletions
diff --git a/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt b/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt index a7e155a..36afa32 100644 --- a/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt +++ b/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt @@ -127,7 +127,7 @@ Nintendo Wii device tree - reg : should contain the SDHCI registers location and length - interrupts : should contain the SDHCI interrupt -1.j) The Inter-Processsor Communication (IPC) node +1.j) The Inter-Processor Communication (IPC) node Represent the Inter-Processor Communication interface. This interface enables communications between the Broadway and the Starlet processors. diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 492e81d..9536652 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -226,7 +226,7 @@ Who: Zhang Rui <rui.zhang@intel.com> What: CONFIG_ACPI_PROCFS_POWER When: 2.6.39 Why: sysfs I/F for ACPI power devices, including AC and Battery, - has been working in upstream kenrel since 2.6.24, Sep 2007. + has been working in upstream kernel since 2.6.24, Sep 2007. In 2.6.37, we make the sysfs I/F always built in and this option disabled by default. Remove this option and the ACPI power procfs interface in 2.6.39. diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h index c98c759..2f494b6 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap.h @@ -55,7 +55,7 @@ #include "msm_iomap-8960.h" -/* Virtual addressses shared across all MSM targets. */ +/* Virtual addresses shared across all MSM targets. */ #define MSM_CSR_BASE IOMEM(0xE0001000) #define MSM_QGIC_DIST_BASE IOMEM(0xF0000000) #define MSM_QGIC_CPU_BASE IOMEM(0xF0001000) diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index c2804c1..a016c8b 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -236,7 +236,7 @@ #define OMAP343X_CONTROL_WKUP_DEBOBS3 (OMAP343X_CONTROL_GENERAL_WKUP + 0x014) #define OMAP343X_CONTROL_WKUP_DEBOBS4 (OMAP343X_CONTROL_GENERAL_WKUP + 0x018) -/* 36xx-only RTA - Retention till Accesss control registers and bits */ +/* 36xx-only RTA - Retention till Access control registers and bits */ #define OMAP36XX_CONTROL_MEM_RTA_CTRL 0x40C #define OMAP36XX_RTA_DISABLE 0x0 diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c index 4ce8d13..ab3ccab 100644 --- a/arch/ia64/hp/common/sba_iommu.c +++ b/arch/ia64/hp/common/sba_iommu.c @@ -1063,7 +1063,7 @@ static void sba_unmap_page(struct device *dev, dma_addr_t iova, size_t size, /* ** Address does not fall w/in IOVA, must be bypassing */ - DBG_BYPASS("sba_unmap_single_atttrs() bypass addr: 0x%lx\n", + DBG_BYPASS("sba_unmap_single_attrs() bypass addr: 0x%lx\n", iova); #ifdef ENABLE_MARK_CLEAN diff --git a/arch/powerpc/include/asm/pte-hash64-64k.h b/arch/powerpc/include/asm/pte-hash64-64k.h index c4490f9..59247e8 100644 --- a/arch/powerpc/include/asm/pte-hash64-64k.h +++ b/arch/powerpc/include/asm/pte-hash64-64k.h @@ -22,7 +22,7 @@ #define _PAGE_HASHPTE _PAGE_HPTE_SUB /* Note the full page bits must be in the same location as for normal - * 4k pages as the same asssembly will be used to insert 64K pages + * 4k pages as the same assembly will be used to insert 64K pages * wether the kernel has CONFIG_PPC_64K_PAGES or not */ #define _PAGE_F_SECOND 0x00008000 /* full page: hidx bits */ diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c index 42850ee..9411747 100644 --- a/arch/powerpc/kernel/kgdb.c +++ b/arch/powerpc/kernel/kgdb.c @@ -142,7 +142,7 @@ static int kgdb_singlestep(struct pt_regs *regs) return 0; /* - * On Book E and perhaps other processsors, singlestep is handled on + * On Book E and perhaps other processors, singlestep is handled on * the critical exception stack. This causes current_thread_info() * to fail, since it it locates the thread_info by masking off * the low bits of the current stack pointer. We work around diff --git a/arch/x86/xen/pci-swiotlb-xen.c b/arch/x86/xen/pci-swiotlb-xen.c index bfd0632..b480d42 100644 --- a/arch/x86/xen/pci-swiotlb-xen.c +++ b/arch/x86/xen/pci-swiotlb-xen.c @@ -36,7 +36,7 @@ int __init pci_xen_swiotlb_detect(void) /* If running as PV guest, either iommu=soft, or swiotlb=force will * activate this IOMMU. If running as PV privileged, activate it - * irregardlesss. + * irregardless. */ if ((xen_initial_domain() || swiotlb || swiotlb_force) && (xen_pv_domain())) diff --git a/drivers/acpi/acpica/utresrc.c b/drivers/acpi/acpica/utresrc.c index 84e0518..6ffd3a8 100644 --- a/drivers/acpi/acpica/utresrc.c +++ b/drivers/acpi/acpica/utresrc.c @@ -50,7 +50,7 @@ ACPI_MODULE_NAME("utresrc") #if defined(ACPI_DISASSEMBLER) || defined (ACPI_DEBUGGER) /* * Strings used to decode resource descriptors. - * Used by both the disasssembler and the debugger resource dump routines + * Used by both the disassembler and the debugger resource dump routines */ const char *acpi_gbl_bm_decode[] = { "NotBusMaster", diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index ec574fc..db39e9e 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -1521,7 +1521,7 @@ static void acpi_video_device_notify(acpi_handle handle, u32 event, void *data) acpi_bus_generate_proc_event(device, event, 0); keycode = KEY_BRIGHTNESSDOWN; break; - case ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS: /* zero brightnesss */ + case ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS: /* zero brightness */ if (brightness_switch_enabled) acpi_video_switch_brightness(video_device, event); acpi_bus_generate_proc_event(device, event, 0); diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c index ff0c373..5629a0c 100644 --- a/drivers/firmware/efivars.c +++ b/drivers/firmware/efivars.c @@ -321,7 +321,7 @@ efivar_show_raw(struct efivar_entry *entry, char *buf) /* * Generic read/write functions that call the specific functions of - * the atttributes... + * the attributes... */ static ssize_t efivar_attr_show(struct kobject *kobj, struct attribute *attr, char *buf) diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c index bb8b722..0ff92c2 100644 --- a/drivers/macintosh/therm_pm72.c +++ b/drivers/macintosh/therm_pm72.c @@ -44,11 +44,11 @@ * TODO: - Check MPU structure version/signature * - Add things like /sbin/overtemp for non-critical * overtemp conditions so userland can take some policy - * decisions, like slewing down CPUs + * decisions, like slowing down CPUs * - Deal with fan and i2c failures in a better way * - Maybe do a generic PID based on params used for * U3 and Drives ? Definitely need to factor code a bit - * bettter... also make sensor detection more robust using + * better... also make sensor detection more robust using * the device-tree to probe for them * - Figure out how to get the slots consumption and set the * slots fan accordingly diff --git a/drivers/media/dvb/dvb-usb/dw2102.c b/drivers/media/dvb/dvb-usb/dw2102.c index f5b9da1..d312323 100644 --- a/drivers/media/dvb/dvb-usb/dw2102.c +++ b/drivers/media/dvb/dvb-usb/dw2102.c @@ -1377,7 +1377,7 @@ static struct rc_map_table rc_map_su3000_table[] = { { 0x0f, KEY_BLUE }, /* bottom yellow button */ { 0x14, KEY_AUDIO }, /* Snapshot */ { 0x38, KEY_TV }, /* TV/Radio */ - { 0x0c, KEY_ESC } /* upper Red buttton */ + { 0x0c, KEY_ESC } /* upper Red button */ }; static struct rc_map_dvb_usb_table_table keys_tables[] = { diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/video/msp3400-driver.c index 8126622..de5d481 100644 --- a/drivers/media/video/msp3400-driver.c +++ b/drivers/media/video/msp3400-driver.c @@ -96,7 +96,7 @@ MODULE_PARM_DESC(debug, "Enable debug messages [0-3]"); MODULE_PARM_DESC(stereo_threshold, "Sets signal threshold to activate stereo"); MODULE_PARM_DESC(standard, "Specify audio standard: 32 = NTSC, 64 = radio, Default: Autodetect"); MODULE_PARM_DESC(amsound, "Hardwire AM sound at 6.5Hz (France), FM can autoscan"); -MODULE_PARM_DESC(dolby, "Activates Dolby processsing"); +MODULE_PARM_DESC(dolby, "Activates Dolby processing"); /* ---------------------------------------------------------------------- */ diff --git a/drivers/media/video/saa7164/saa7164-encoder.c b/drivers/media/video/saa7164/saa7164-encoder.c index f9d5946..4003645 100644 --- a/drivers/media/video/saa7164/saa7164-encoder.c +++ b/drivers/media/video/saa7164/saa7164-encoder.c @@ -177,7 +177,7 @@ static int saa7164_encoder_buffers_alloc(struct saa7164_port *port) } } - /* Allocate some kenrel kernel buffers for copying + /* Allocate some kernel buffers for copying * to userpsace. */ len = params->numberoflines * params->pitch; diff --git a/drivers/media/video/saa7164/saa7164-vbi.c b/drivers/media/video/saa7164/saa7164-vbi.c index 9e5b01c..bc1fced 100644 --- a/drivers/media/video/saa7164/saa7164-vbi.c +++ b/drivers/media/video/saa7164/saa7164-vbi.c @@ -148,7 +148,7 @@ static int saa7164_vbi_buffers_alloc(struct saa7164_port *port) } } - /* Allocate some kenrel kernel buffers for copying + /* Allocate some kernel buffers for copying * to userpsace. */ len = params->numberoflines * params->pitch; diff --git a/drivers/message/i2o/README.ioctl b/drivers/message/i2o/README.ioctl index 65c0c47..5fb195af4 100644 --- a/drivers/message/i2o/README.ioctl +++ b/drivers/message/i2o/README.ioctl @@ -110,7 +110,7 @@ V. Getting Logical Configuration Table ENOBUFS Buffer not large enough. If this occurs, the required buffer length is written into *(lct->reslen) -VI. Settting Parameters +VI. Setting Parameters SYNOPSIS diff --git a/drivers/net/can/pch_can.c b/drivers/net/can/pch_can.c index e54712b..d11fbb2 100644 --- a/drivers/net/can/pch_can.c +++ b/drivers/net/can/pch_can.c @@ -653,7 +653,7 @@ static int pch_can_rx_normal(struct net_device *ndev, u32 obj_num, int quota) u16 data_reg; do { - /* Reading the messsage object from the Message RAM */ + /* Reading the message object from the Message RAM */ iowrite32(PCH_CMASK_RX_TX_GET, &priv->regs->ifregs[0].cmask); pch_can_rw_msg_obj(&priv->regs->ifregs[0].creq, obj_num); diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c index 872183f..d532dde 100644 --- a/drivers/net/irda/ali-ircc.c +++ b/drivers/net/irda/ali-ircc.c @@ -1800,7 +1800,7 @@ static int ali_ircc_dma_receive_complete(struct ali_ircc_cb *self) MessageCount = inb(iobase+ FIR_LSR)&0x07; if (MessageCount > 0) - IRDA_DEBUG(0, "%s(), Messsage count = %d,\n", __func__ , MessageCount); + IRDA_DEBUG(0, "%s(), Message count = %d,\n", __func__ , MessageCount); for (i=0; i<=MessageCount; i++) { diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 337bdcd..665c3d8 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -7231,7 +7231,7 @@ static void do_s2io_card_down(struct s2io_nic *sp, int do_io) /* As per the HW requirement we need to replenish the * receive buffer to avoid the ring bump. Since there is * no intention of processing the Rx frame at this pointwe are - * just settting the ownership bit of rxd in Each Rx + * just setting the ownership bit of rxd in Each Rx * ring to HW and set the appropriate buffer size * based on the ring mode */ diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c index 6f92e48..cfd8881 100644 --- a/drivers/net/ucc_geth_ethtool.c +++ b/drivers/net/ucc_geth_ethtool.c @@ -6,7 +6,7 @@ * Author: Li Yang <leoli@freescale.com> * * Limitation: - * Can only get/set setttings of the first queue. + * Can only get/set settings of the first queue. * Need to re-open the interface manually after changing some parameters. * * This program is free software; you can redistribute it and/or modify it diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index 069c1cf..fef9ecc 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -109,7 +109,7 @@ int usbnet_get_endpoints(struct usbnet *dev, struct usb_interface *intf) /* take the first altsetting with in-bulk + out-bulk; * remember any status endpoint, just in case; - * ignore other endpoints and altsetttings. + * ignore other endpoints and altsettings. */ for (ep = 0; ep < alt->desc.bNumEndpoints; ep++) { struct usb_host_endpoint *e; diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c index f875cfa..737b59f 100644 --- a/drivers/net/wan/pc300_drv.c +++ b/drivers/net/wan/pc300_drv.c @@ -1445,7 +1445,7 @@ static void falc_update_stats(pc300_t * card, int ch) * Description: In the remote loopback mode the clock and data recovered * from the line inputs RL1/2 or RDIP/RDIN are routed back * to the line outputs XL1/2 or XDOP/XDON via the analog - * transmitter. As in normal mode they are processsed by + * transmitter. As in normal mode they are processed by * the synchronizer and then sent to the system interface. *---------------------------------------------------------------------------- */ diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index 6eadf97..aa1ba5d 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -3329,26 +3329,26 @@ static int ar9300_eeprom_restore_internal(struct ath_hw *ah, else cptr = AR9300_BASE_ADDR; ath_dbg(common, ATH_DBG_EEPROM, - "Trying EEPROM accesss at Address 0x%04x\n", cptr); + "Trying EEPROM access at Address 0x%04x\n", cptr); if (ar9300_check_eeprom_header(ah, read, cptr)) goto found; cptr = AR9300_BASE_ADDR_512; ath_dbg(common, ATH_DBG_EEPROM, - "Trying EEPROM accesss at Address 0x%04x\n", cptr); + "Trying EEPROM access at Address 0x%04x\n", cptr); if (ar9300_check_eeprom_header(ah, read, cptr)) goto found; read = ar9300_read_otp; cptr = AR9300_BASE_ADDR; ath_dbg(common, ATH_DBG_EEPROM, - "Trying OTP accesss at Address 0x%04x\n", cptr); + "Trying OTP access at Address 0x%04x\n", cptr); if (ar9300_check_eeprom_header(ah, read, cptr)) goto found; cptr = AR9300_BASE_ADDR_512; ath_dbg(common, ATH_DBG_EEPROM, - "Trying OTP accesss at Address 0x%04x\n", cptr); + "Trying OTP access at Address 0x%04x\n", cptr); if (ar9300_check_eeprom_header(ah, read, cptr)) goto found; diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c index 42c3fe3..87813c3 100644 --- a/drivers/net/wireless/ipw2x00/ipw2200.c +++ b/drivers/net/wireless/ipw2x00/ipw2200.c @@ -7430,7 +7430,7 @@ static int ipw_associate_network(struct ipw_priv *priv, priv->assoc_request.capability &= ~cpu_to_le16(WLAN_CAPABILITY_SHORT_SLOT_TIME); - IPW_DEBUG_ASSOC("%sssocation attempt: '%s', channel %d, " + IPW_DEBUG_ASSOC("%ssociation attempt: '%s', channel %d, " "802.11%c [%d], %s[:%s], enc=%s%s%s%c%c\n", roaming ? "Rea" : "A", print_ssid(ssid, priv->essid, priv->essid_len), diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.c b/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.c index 078ed60..232aff1 100644 --- a/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.c +++ b/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.c @@ -1,5 +1,5 @@ /* - * Aic7xxx SCSI host adapter firmware asssembler symbol table implementation + * Aic7xxx SCSI host adapter firmware assembler symbol table implementation * * Copyright (c) 1997 Justin T. Gibbs. * Copyright (c) 2002 Adaptec Inc. diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.h b/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.h index 2ba73ae..34bbcad 100644 --- a/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.h +++ b/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.h @@ -1,5 +1,5 @@ /* - * Aic7xxx SCSI host adapter firmware asssembler symbol table definitions + * Aic7xxx SCSI host adapter firmware assembler symbol table definitions * * Copyright (c) 1997 Justin T. Gibbs. * Copyright (c) 2002 Adaptec Inc. diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c index d0c8234..d0cdde5 100644 --- a/drivers/scsi/constants.c +++ b/drivers/scsi/constants.c @@ -34,7 +34,7 @@ static const char * cdb_byte0_names[] = { /* 00-03 */ "Test Unit Ready", "Rezero Unit/Rewind", NULL, "Request Sense", /* 04-07 */ "Format Unit/Medium", "Read Block Limits", NULL, - "Reasssign Blocks", + "Reassign Blocks", /* 08-0d */ "Read(6)", NULL, "Write(6)", "Seek(6)", NULL, NULL, /* 0e-12 */ NULL, "Read Reverse", "Write Filemarks", "Space", "Inquiry", /* 13-16 */ "Verify(6)", "Recover Buffered Data", "Mode Select(6)", diff --git a/drivers/scsi/esp_scsi.c b/drivers/scsi/esp_scsi.c index 5755852..182831e 100644 --- a/drivers/scsi/esp_scsi.c +++ b/drivers/scsi/esp_scsi.c @@ -1059,7 +1059,7 @@ static struct esp_cmd_entry *esp_reconnect_with_tag(struct esp *esp, esp->ops->send_dma_cmd(esp, esp->command_block_dma, 2, 2, 1, ESP_CMD_DMA | ESP_CMD_TI); - /* ACK the msssage. */ + /* ACK the message. */ scsi_esp_cmd(esp, ESP_CMD_MOK); for (i = 0; i < ESP_RESELECT_TAG_LIMIT; i++) { diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 17d7893..8dcbf8f 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -4532,7 +4532,7 @@ lpfc_set_vport_symbolic_name(struct fc_vport *fc_vport) * * This function is called by the lpfc_get_cfgparam() routine to set the * module lpfc_log_verbose into the @phba cfg_log_verbose for use with - * log messsage according to the module's lpfc_log_verbose parameter setting + * log message according to the module's lpfc_log_verbose parameter setting * before hba port or vport created. **/ static void diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h index 95f11ed..86b6f7e 100644 --- a/drivers/scsi/lpfc/lpfc_hw.h +++ b/drivers/scsi/lpfc/lpfc_hw.h @@ -1002,7 +1002,7 @@ typedef struct _ELS_PKT { /* Structure is in Big Endian format */ #define SLI_MGMT_GRPL 0x102 /* Get registered Port list */ #define SLI_MGMT_GPAT 0x110 /* Get Port attributes */ #define SLI_MGMT_RHBA 0x200 /* Register HBA */ -#define SLI_MGMT_RHAT 0x201 /* Register HBA atttributes */ +#define SLI_MGMT_RHAT 0x201 /* Register HBA attributes */ #define SLI_MGMT_RPRT 0x210 /* Register Port */ #define SLI_MGMT_RPA 0x211 /* Register Port attributes */ #define SLI_MGMT_DHBA 0x300 /* De-register HBA */ diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index dacabbe..63c5d62 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -3040,7 +3040,7 @@ lpfc_sli_sp_handle_rspiocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, list_add_tail(&rspiocbp->list, &(pring->iocb_continueq)); pring->iocb_continueq_cnt++; - /* Now, determine whetehr the list is completed for processing */ + /* Now, determine whether the list is completed for processing */ irsp = &rspiocbp->iocb; if (irsp->ulpLe) { /* diff --git a/drivers/scsi/nsp32_debug.c b/drivers/scsi/nsp32_debug.c index 2fb3fb5..58806f4 100644 --- a/drivers/scsi/nsp32_debug.c +++ b/drivers/scsi/nsp32_debug.c @@ -13,7 +13,7 @@ static const char unknown[] = "UNKNOWN"; static const char * group_0_commands[] = { /* 00-03 */ "Test Unit Ready", "Rezero Unit", unknown, "Request Sense", -/* 04-07 */ "Format Unit", "Read Block Limits", unknown, "Reasssign Blocks", +/* 04-07 */ "Format Unit", "Read Block Limits", unknown, "Reassign Blocks", /* 08-0d */ "Read (6)", unknown, "Write (6)", "Seek (6)", unknown, unknown, /* 0e-12 */ unknown, "Read Reverse", "Write Filemarks", "Space", "Inquiry", /* 13-16 */ unknown, "Recover Buffered Data", "Mode Select", "Reserve", diff --git a/drivers/scsi/pcmcia/nsp_debug.c b/drivers/scsi/pcmcia/nsp_debug.c index 3c6ef64..6aa7d26 100644 --- a/drivers/scsi/pcmcia/nsp_debug.c +++ b/drivers/scsi/pcmcia/nsp_debug.c @@ -15,7 +15,7 @@ static const char unknown[] = "UNKNOWN"; static const char * group_0_commands[] = { /* 00-03 */ "Test Unit Ready", "Rezero Unit", unknown, "Request Sense", -/* 04-07 */ "Format Unit", "Read Block Limits", unknown, "Reasssign Blocks", +/* 04-07 */ "Format Unit", "Read Block Limits", unknown, "Reassign Blocks", /* 08-0d */ "Read (6)", unknown, "Write (6)", "Seek (6)", unknown, unknown, /* 0e-12 */ unknown, "Read Reverse", "Write Filemarks", "Space", "Inquiry", /* 13-16 */ unknown, "Recover Buffered Data", "Mode Select", "Reserve", diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c index f9d81c8..d78b58d 100644 --- a/drivers/scsi/qla4xxx/ql4_mbx.c +++ b/drivers/scsi/qla4xxx/ql4_mbx.c @@ -19,7 +19,7 @@ * @mbx_cmd: data pointer for mailbox in registers. * @mbx_sts: data pointer for mailbox out registers. * - * This routine isssue mailbox commands and waits for completion. + * This routine issue mailbox commands and waits for completion. * If outCount is 0, this routine completes successfully WITHOUT waiting * for the mailbox command to complete. **/ diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 74273e6..77623b9 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -2128,7 +2128,7 @@ static int gsmld_attach_gsm(struct tty_struct *tty, struct gsm_mux *gsm) /** * gsmld_detach_gsm - stop doing 0710 mux - * @tty: tty atttached to the mux + * @tty: tty attached to the mux * @gsm: mux * * Shutdown and then clean up the resources used by the line discipline diff --git a/drivers/usb/host/imx21-dbg.c b/drivers/usb/host/imx21-dbg.c index 512f647..6d75334 100644 --- a/drivers/usb/host/imx21-dbg.c +++ b/drivers/usb/host/imx21-dbg.c @@ -384,7 +384,7 @@ static void debug_isoc_show_one(struct seq_file *s, seq_printf(s, "%s %d:\n" "cc=0X%02X\n" "scheduled frame %d (%d)\n" - "submittted frame %d (%d)\n" + "submitted frame %d (%d)\n" "completed frame %d (%d)\n" "requested length=%d\n" "completed length=%d\n\n", diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 388cc12..ff9a01f 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -104,7 +104,7 @@ get_endpoints(struct usbtest_dev *dev, struct usb_interface *intf) alt = intf->altsetting + tmp; /* take the first altsetting with in-bulk + out-bulk; - * ignore other endpoints and altsetttings. + * ignore other endpoints and altsettings. */ for (ep = 0; ep < alt->desc.bNumEndpoints; ep++) { struct usb_host_endpoint *e; diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index 199a801..f340f7c 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -709,7 +709,7 @@ again: WARN_ON(cur->checked); if (!list_empty(&cur->upper)) { /* - * the backref was added previously when processsing + * the backref was added previously when processing * backref of type BTRFS_TREE_BLOCK_REF_KEY */ BUG_ON(!list_is_singular(&cur->upper)); diff --git a/fs/freevxfs/vxfs_inode.c b/fs/freevxfs/vxfs_inode.c index 2ba6719..1a43114 100644 --- a/fs/freevxfs/vxfs_inode.c +++ b/fs/freevxfs/vxfs_inode.c @@ -272,7 +272,7 @@ vxfs_get_fake_inode(struct super_block *sbp, struct vxfs_inode_info *vip) * *ip: VFS inode * * Description: - * vxfs_put_fake_inode frees all data asssociated with @ip. + * vxfs_put_fake_inode frees all data associated with @ip. */ void vxfs_put_fake_inode(struct inode *ip) diff --git a/fs/nfsd/stats.c b/fs/nfsd/stats.c index 5232d3e..a2e2402 100644 --- a/fs/nfsd/stats.c +++ b/fs/nfsd/stats.c @@ -8,7 +8,7 @@ * Statistsics for the reply cache * fh <stale> <total-lookups> <anonlookups> <dir-not-in-dcache> <nondir-not-in-dcache> * statistics for filehandle lookup - * io <bytes-read> <bytes-writtten> + * io <bytes-read> <bytes-written> * statistics for IO throughput * th <threads> <fullcnt> <10%-20%> <20%-30%> ... <90%-100%> <100%> * time (seconds) when nfsd thread usage above thresholds diff --git a/fs/squashfs/Kconfig b/fs/squashfs/Kconfig index efc309f..7797218 100644 --- a/fs/squashfs/Kconfig +++ b/fs/squashfs/Kconfig @@ -42,7 +42,7 @@ config SQUASHFS_LZO select LZO_DECOMPRESS help Saying Y here includes support for reading Squashfs file systems - compressed with LZO compresssion. LZO compression is mainly + compressed with LZO compression. LZO compression is mainly aimed at embedded systems with slower CPUs where the overheads of zlib are too high. @@ -57,7 +57,7 @@ config SQUASHFS_XZ select XZ_DEC help Saying Y here includes support for reading Squashfs file systems - compressed with XZ compresssion. XZ gives better compression than + compressed with XZ compression. XZ gives better compression than the default zlib compression, at the expense of greater CPU and memory overhead. diff --git a/fs/squashfs/cache.c b/fs/squashfs/cache.c index c37b520..4b5a3fb 100644 --- a/fs/squashfs/cache.c +++ b/fs/squashfs/cache.c @@ -29,7 +29,7 @@ * plus functions layered ontop of the generic cache implementation to * access the metadata and fragment caches. * - * To avoid out of memory and fragmentation isssues with vmalloc the cache + * To avoid out of memory and fragmentation issues with vmalloc the cache * uses sequences of kmalloced PAGE_CACHE_SIZE buffers. * * It should be noted that the cache is not used for file datablocks, these diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index a37480a..d11ce61 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -1470,7 +1470,7 @@ xfs_itruncate_finish( * file but the log buffers containing the free and reallocation * don't, then we'd end up with garbage in the blocks being freed. * As long as we make the new_size permanent before actually - * freeing any blocks it doesn't matter if they get writtten to. + * freeing any blocks it doesn't matter if they get written to. * * The callers must signal into us whether or not the size * setting here must be synchronous. There are a few cases diff --git a/include/linux/posix-clock.h b/include/linux/posix-clock.h index 7f1183d..34c4498 100644 --- a/include/linux/posix-clock.h +++ b/include/linux/posix-clock.h @@ -45,7 +45,7 @@ struct posix_clock; * @timer_create: Create a new timer * @timer_delete: Remove a previously created timer * @timer_gettime: Get remaining time and interval of a timer - * @timer_setttime: Set a timer's initial expiration and interval + * @timer_settime: Set a timer's initial expiration and interval * @fasync: Optional character device fasync method * @mmap: Optional character device mmap method * @open: Optional character device open method diff --git a/include/net/genetlink.h b/include/net/genetlink.h index b4c7c1c..d420f28 100644 --- a/include/net/genetlink.h +++ b/include/net/genetlink.h @@ -260,7 +260,7 @@ static inline int genlmsg_reply(struct sk_buff *skb, struct genl_info *info) /** * gennlmsg_data - head of message payload - * @gnlh: genetlink messsage header + * @gnlh: genetlink message header */ static inline void *genlmsg_data(const struct genlmsghdr *gnlh) { diff --git a/include/net/netlink.h b/include/net/netlink.h index 8a3906a..02740a9 100644 --- a/include/net/netlink.h +++ b/include/net/netlink.h @@ -290,7 +290,7 @@ static inline int nlmsg_padlen(int payload) /** * nlmsg_data - head of message payload - * @nlh: netlink messsage header + * @nlh: netlink message header */ static inline void *nlmsg_data(const struct nlmsghdr *nlh) { diff --git a/net/sunrpc/xprtrdma/svc_rdma_transport.c b/net/sunrpc/xprtrdma/svc_rdma_transport.c index 1a10dcd..6c014dd 100644 --- a/net/sunrpc/xprtrdma/svc_rdma_transport.c +++ b/net/sunrpc/xprtrdma/svc_rdma_transport.c @@ -333,7 +333,7 @@ static void rq_cq_reap(struct svcxprt_rdma *xprt) } /* - * Processs a completion context + * Process a completion context */ static void process_context(struct svcxprt_rdma *xprt, struct svc_rdma_op_ctxt *ctxt) |