diff options
39 files changed, 1700 insertions, 843 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 92e1ab8..040fee6 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -229,14 +229,6 @@ and is between 256 and 4096 characters. It is defined in the file to assume that this machine's pmtimer latches its value and always returns good values. - acpi.power_nocheck= [HW,ACPI] - Format: 1/0 enable/disable the check of power state. - On some bogus BIOS the _PSC object/_STA object of - power resource can't return the correct device power - state. In such case it is unneccessary to check its - power state again in power transition. - 1 : disable the power state check - acpi_sci= [HW,ACPI] ACPI System Control Interrupt trigger mode Format: { level | edge | high | low } diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index 78e354b..f2296ec 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -920,7 +920,7 @@ The available commands are: echo '<LED number> off' >/proc/acpi/ibm/led echo '<LED number> blink' >/proc/acpi/ibm/led -The <LED number> range is 0 to 7. The set of LEDs that can be +The <LED number> range is 0 to 15. The set of LEDs that can be controlled varies from model to model. Here is the common ThinkPad mapping: @@ -932,6 +932,11 @@ mapping: 5 - UltraBase battery slot 6 - (unknown) 7 - standby + 8 - dock status 1 + 9 - dock status 2 + 10, 11 - (unknown) + 12 - thinkvantage + 13, 14, 15 - (unknown) All of the above can be turned on and off and can be made to blink. @@ -940,10 +945,12 @@ sysfs notes: The ThinkPad LED sysfs interface is described in detail by the LED class documentation, in Documentation/leds-class.txt. -The leds are named (in LED ID order, from 0 to 7): +The LEDs are named (in LED ID order, from 0 to 12): "tpacpi::power", "tpacpi:orange:batt", "tpacpi:green:batt", "tpacpi::dock_active", "tpacpi::bay_active", "tpacpi::dock_batt", -"tpacpi::unknown_led", "tpacpi::standby". +"tpacpi::unknown_led", "tpacpi::standby", "tpacpi::dock_status1", +"tpacpi::dock_status2", "tpacpi::unknown_led2", "tpacpi::unknown_led3", +"tpacpi::thinkvantage". Due to limitations in the sysfs LED class, if the status of the LED indicators cannot be read due to an error, thinkpad-acpi will report it as @@ -958,6 +965,12 @@ ThinkPad indicator LED should blink in hardware accelerated mode, use the "timer" trigger, and leave the delay_on and delay_off parameters set to zero (to request hardware acceleration autodetection). +LEDs that are known not to exist in a given ThinkPad model are not +made available through the sysfs interface. If you have a dock and you +notice there are LEDs listed for your ThinkPad that do not exist (and +are not in the dock), or if you notice that there are missing LEDs, +a report to ibm-acpi-devel@lists.sourceforge.net is appreciated. + ACPI sounds -- /proc/acpi/ibm/beep ---------------------------------- @@ -1156,17 +1169,19 @@ may not be distinct. Later Lenovo models that implement the ACPI display backlight brightness control methods have 16 levels, ranging from 0 to 15. -There are two interfaces to the firmware for direct brightness control, -EC and UCMS (or CMOS). To select which one should be used, use the -brightness_mode module parameter: brightness_mode=1 selects EC mode, -brightness_mode=2 selects UCMS mode, brightness_mode=3 selects EC -mode with NVRAM backing (so that brightness changes are remembered -across shutdown/reboot). +For IBM ThinkPads, there are two interfaces to the firmware for direct +brightness control, EC and UCMS (or CMOS). To select which one should be +used, use the brightness_mode module parameter: brightness_mode=1 selects +EC mode, brightness_mode=2 selects UCMS mode, brightness_mode=3 selects EC +mode with NVRAM backing (so that brightness changes are remembered across +shutdown/reboot). The driver tries to select which interface to use from a table of defaults for each ThinkPad model. If it makes a wrong choice, please report this as a bug, so that we can fix it. +Lenovo ThinkPads only support brightness_mode=2 (UCMS). + When display backlight brightness controls are available through the standard ACPI interface, it is best to use it instead of this direct ThinkPad-specific interface. The driver will disable its native @@ -1254,7 +1269,7 @@ Fan control and monitoring: fan speed, fan enable/disable procfs: /proc/acpi/ibm/fan sysfs device attributes: (hwmon "thinkpad") fan1_input, pwm1, - pwm1_enable + pwm1_enable, fan2_input sysfs hwmon driver attributes: fan_watchdog NOTE NOTE NOTE: fan control operations are disabled by default for @@ -1267,6 +1282,9 @@ from the hardware registers of the embedded controller. This is known to work on later R, T, X and Z series ThinkPads but may show a bogus value on other models. +Some Lenovo ThinkPads support a secondary fan. This fan cannot be +controlled separately, it shares the main fan control. + Fan levels: Most ThinkPad fans work in "levels" at the firmware interface. Level 0 @@ -1397,6 +1415,11 @@ hwmon device attribute fan1_input: which can take up to two minutes. May return rubbish on older ThinkPads. +hwmon device attribute fan2_input: + Fan tachometer reading, in RPM, for the secondary fan. + Available only on some ThinkPads. If the secondary fan is + not installed, will always read 0. + hwmon driver attribute fan_watchdog: Fan safety watchdog timer interval, in seconds. Minimum is 1 second, maximum is 120 seconds. 0 disables the watchdog. @@ -1555,3 +1578,7 @@ Sysfs interface changelog: 0x020300: hotkey enable/disable support removed, attributes hotkey_bios_enabled and hotkey_enable deprecated and marked for removal. + +0x020400: Marker for 16 LEDs support. Also, LEDs that are known + to not exist in a given model are not registered with + the LED sysfs class anymore. diff --git a/MAINTAINERS b/MAINTAINERS index 303129a..7d9d374 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -230,6 +230,13 @@ L: linux-acenic@sunsite.dk S: Maintained F: drivers/net/acenic* +ACER ASPIRE ONE TEMPERATURE AND FAN DRIVER +P: Peter Feuerer +M: peter@piie.net +W: http://piie.net/?section=acerhdf +S: Maintained +F: drivers/platform/x86/acerhdf.c + ACER WMI LAPTOP EXTRAS P: Carlos Corbacho M: carlos@strangeworlds.co.uk diff --git a/arch/ia64/kernel/acpi-processor.c b/arch/ia64/kernel/acpi-processor.c index cbe6cee..dbda7bd 100644 --- a/arch/ia64/kernel/acpi-processor.c +++ b/arch/ia64/kernel/acpi-processor.c @@ -71,3 +71,15 @@ void arch_acpi_processor_init_pdc(struct acpi_processor *pr) } EXPORT_SYMBOL(arch_acpi_processor_init_pdc); + +void arch_acpi_processor_cleanup_pdc(struct acpi_processor *pr) +{ + if (pr->pdc) { + kfree(pr->pdc->pointer->buffer.pointer); + kfree(pr->pdc->pointer); + kfree(pr->pdc); + pr->pdc = NULL; + } +} + +EXPORT_SYMBOL(arch_acpi_processor_cleanup_pdc); diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h index 4518dc5..20d1465 100644 --- a/arch/x86/include/asm/acpi.h +++ b/arch/x86/include/asm/acpi.h @@ -144,6 +144,7 @@ static inline unsigned int acpi_processor_cstate_check(unsigned int max_cstate) #else /* !CONFIG_ACPI */ +#define acpi_disabled 1 #define acpi_lapic 0 #define acpi_ioapic 0 static inline void acpi_noirq_set(void) { } diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h index cb739cc..d419f5c 100644 --- a/arch/x86/include/asm/pci_x86.h +++ b/arch/x86/include/asm/pci_x86.h @@ -121,6 +121,9 @@ extern int __init pcibios_init(void); extern int __init pci_mmcfg_arch_init(void); extern void __init pci_mmcfg_arch_free(void); +extern struct acpi_mcfg_allocation *pci_mmcfg_config; +extern int pci_mmcfg_config_num; + /* * AMD Fam10h CPUs are buggy, and cannot access MMIO config space * on their northbrige except through the * %eax register. As such, you MUST diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 6310861..6b8ca3a 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -44,11 +44,7 @@ static int __initdata acpi_force = 0; u32 acpi_rsdt_forced; -#ifdef CONFIG_ACPI -int acpi_disabled = 0; -#else -int acpi_disabled = 1; -#endif +int acpi_disabled; EXPORT_SYMBOL(acpi_disabled); #ifdef CONFIG_X86_64 @@ -122,72 +118,6 @@ void __init __acpi_unmap_table(char *map, unsigned long size) early_iounmap(map, size); } -#ifdef CONFIG_PCI_MMCONFIG - -static int acpi_mcfg_64bit_base_addr __initdata = FALSE; - -/* The physical address of the MMCONFIG aperture. Set from ACPI tables. */ -struct acpi_mcfg_allocation *pci_mmcfg_config; -int pci_mmcfg_config_num; - -static int __init acpi_mcfg_oem_check(struct acpi_table_mcfg *mcfg) -{ - if (!strcmp(mcfg->header.oem_id, "SGI")) - acpi_mcfg_64bit_base_addr = TRUE; - - return 0; -} - -int __init acpi_parse_mcfg(struct acpi_table_header *header) -{ - struct acpi_table_mcfg *mcfg; - unsigned long i; - int config_size; - - if (!header) - return -EINVAL; - - mcfg = (struct acpi_table_mcfg *)header; - - /* how many config structures do we have */ - pci_mmcfg_config_num = 0; - i = header->length - sizeof(struct acpi_table_mcfg); - while (i >= sizeof(struct acpi_mcfg_allocation)) { - ++pci_mmcfg_config_num; - i -= sizeof(struct acpi_mcfg_allocation); - }; - if (pci_mmcfg_config_num == 0) { - printk(KERN_ERR PREFIX "MMCONFIG has no entries\n"); - return -ENODEV; - } - - config_size = pci_mmcfg_config_num * sizeof(*pci_mmcfg_config); - pci_mmcfg_config = kmalloc(config_size, GFP_KERNEL); - if (!pci_mmcfg_config) { - printk(KERN_WARNING PREFIX - "No memory for MCFG config tables\n"); - return -ENOMEM; - } - - memcpy(pci_mmcfg_config, &mcfg[1], config_size); - - acpi_mcfg_oem_check(mcfg); - - for (i = 0; i < pci_mmcfg_config_num; ++i) { - if ((pci_mmcfg_config[i].address > 0xFFFFFFFF) && - !acpi_mcfg_64bit_base_addr) { - printk(KERN_ERR PREFIX - "MMCONFIG not in low 4GB of memory\n"); - kfree(pci_mmcfg_config); - pci_mmcfg_config_num = 0; - return -ENODEV; - } - } - - return 0; -} -#endif /* CONFIG_PCI_MMCONFIG */ - #ifdef CONFIG_X86_LOCAL_APIC static int __init acpi_parse_madt(struct acpi_table_header *table) { @@ -1519,14 +1449,6 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = { }, { .callback = force_acpi_ht, - .ident = "ASUS P4B266", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - DMI_MATCH(DMI_BOARD_NAME, "P4B266"), - }, - }, - { - .callback = force_acpi_ht, .ident = "ASUS P2B-DS", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c index bbbe4bb..8c44c23 100644 --- a/arch/x86/kernel/acpi/cstate.c +++ b/arch/x86/kernel/acpi/cstate.c @@ -34,12 +34,22 @@ void acpi_processor_power_init_bm_check(struct acpi_processor_flags *flags, flags->bm_check = 1; else if (c->x86_vendor == X86_VENDOR_INTEL) { /* - * Today all CPUs that support C3 share cache. - * TBD: This needs to look at cache shared map, once - * multi-core detection patch makes to the base. + * Today all MP CPUs that support C3 share cache. + * And caches should not be flushed by software while + * entering C3 type state. */ flags->bm_check = 1; } + + /* + * On all recent Intel platforms, ARB_DISABLE is a nop. + * So, set bm_control to zero to indicate that ARB_DISABLE + * is not required while entering C3 type state on + * P4, Core and beyond CPUs + */ + if (c->x86_vendor == X86_VENDOR_INTEL && + (c->x86 > 0x6 || (c->x86 == 6 && c->x86_model >= 14))) + flags->bm_control = 0; } EXPORT_SYMBOL(acpi_processor_power_init_bm_check); diff --git a/arch/x86/kernel/acpi/processor.c b/arch/x86/kernel/acpi/processor.c index 7c074ee..d296f4a 100644 --- a/arch/x86/kernel/acpi/processor.c +++ b/arch/x86/kernel/acpi/processor.c @@ -72,6 +72,7 @@ static void init_intel_pdc(struct acpi_processor *pr, struct cpuinfo_x86 *c) return; } + /* Initialize _PDC data based on the CPU vendor */ void arch_acpi_processor_init_pdc(struct acpi_processor *pr) { @@ -85,3 +86,15 @@ void arch_acpi_processor_init_pdc(struct acpi_processor *pr) } EXPORT_SYMBOL(arch_acpi_processor_init_pdc); + +void arch_acpi_processor_cleanup_pdc(struct acpi_processor *pr) +{ + if (pr->pdc) { + kfree(pr->pdc->pointer->buffer.pointer); + kfree(pr->pdc->pointer); + kfree(pr->pdc); + pr->pdc = NULL; + } +} + +EXPORT_SYMBOL(arch_acpi_processor_cleanup_pdc); diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c index 8766b0e..712443e 100644 --- a/arch/x86/pci/mmconfig-shared.c +++ b/arch/x86/pci/mmconfig-shared.c @@ -523,6 +523,69 @@ reject: static int __initdata known_bridge; +static int acpi_mcfg_64bit_base_addr __initdata = FALSE; + +/* The physical address of the MMCONFIG aperture. Set from ACPI tables. */ +struct acpi_mcfg_allocation *pci_mmcfg_config; +int pci_mmcfg_config_num; + +static int __init acpi_mcfg_oem_check(struct acpi_table_mcfg *mcfg) +{ + if (!strcmp(mcfg->header.oem_id, "SGI")) + acpi_mcfg_64bit_base_addr = TRUE; + + return 0; +} + +static int __init pci_parse_mcfg(struct acpi_table_header *header) +{ + struct acpi_table_mcfg *mcfg; + unsigned long i; + int config_size; + + if (!header) + return -EINVAL; + + mcfg = (struct acpi_table_mcfg *)header; + + /* how many config structures do we have */ + pci_mmcfg_config_num = 0; + i = header->length - sizeof(struct acpi_table_mcfg); + while (i >= sizeof(struct acpi_mcfg_allocation)) { + ++pci_mmcfg_config_num; + i -= sizeof(struct acpi_mcfg_allocation); + }; + if (pci_mmcfg_config_num == 0) { + printk(KERN_ERR PREFIX "MMCONFIG has no entries\n"); + return -ENODEV; + } + + config_size = pci_mmcfg_config_num * sizeof(*pci_mmcfg_config); + pci_mmcfg_config = kmalloc(config_size, GFP_KERNEL); + if (!pci_mmcfg_config) { + printk(KERN_WARNING PREFIX + "No memory for MCFG config tables\n"); + return -ENOMEM; + } + + memcpy(pci_mmcfg_config, &mcfg[1], config_size); + + acpi_mcfg_oem_check(mcfg); + + for (i = 0; i < pci_mmcfg_config_num; ++i) { + if ((pci_mmcfg_config[i].address > 0xFFFFFFFF) && + !acpi_mcfg_64bit_base_addr) { + printk(KERN_ERR PREFIX + "MMCONFIG not in low 4GB of memory\n"); + kfree(pci_mmcfg_config); + pci_mmcfg_config_num = 0; + return -ENODEV; + } + } + + return 0; +} + static void __init __pci_mmcfg_init(int early) { /* MMCONFIG disabled */ @@ -543,7 +606,7 @@ static void __init __pci_mmcfg_init(int early) } if (!known_bridge) - acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg); + acpi_table_parse(ACPI_SIG_MCFG, pci_parse_mcfg); pci_mmcfg_reject_broken(early); diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c index 09c6980..f6baa77 100644 --- a/drivers/acpi/blacklist.c +++ b/drivers/acpi/blacklist.c @@ -192,6 +192,22 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"), }, }, + { + .callback = dmi_disable_osi_vista, + .ident = "Sony VGN-NS10J_S", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NS10J_S"), + }, + }, + { + .callback = dmi_disable_osi_vista, + .ident = "Sony VGN-SR290J", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "Sony VGN-SR290J"), + }, + }, /* * BIOS invocation of _OSI(Linux) is almost always a BIOS bug. diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c index 8bd2c2a..a8a5c29 100644 --- a/drivers/acpi/glue.c +++ b/drivers/acpi/glue.c @@ -140,46 +140,6 @@ struct device *acpi_get_physical_device(acpi_handle handle) EXPORT_SYMBOL(acpi_get_physical_device); -/* ToDo: When a PCI bridge is found, return the PCI device behind the bridge - * This should work in general, but did not on a Lenovo T61 for the - * graphics card. But this must be fixed when the PCI device is - * bound and the kernel device struct is attached to the acpi device - * Note: A success call will increase reference count by one - * Do call put_device(dev) on the returned device then - */ -struct device *acpi_get_physical_pci_device(acpi_handle handle) -{ - struct device *dev; - long long device_id; - acpi_status status; - - status = - acpi_evaluate_integer(handle, "_ADR", NULL, &device_id); - - if (ACPI_FAILURE(status)) - return NULL; - - /* We need to attempt to determine whether the _ADR refers to a - PCI device or not. There's no terribly good way to do this, - so the best we can hope for is to assume that there'll never - be a device in the host bridge */ - if (device_id >= 0x10000) { - /* It looks like a PCI device. Does it exist? */ - dev = acpi_get_physical_device(handle); - } else { - /* It doesn't look like a PCI device. Does its parent - exist? */ - acpi_handle phandle; - if (acpi_get_parent(handle, &phandle)) - return NULL; - dev = acpi_get_physical_device(phandle); - } - if (!dev) - return NULL; - return dev; -} -EXPORT_SYMBOL(acpi_get_physical_pci_device); - static int acpi_bind_one(struct device *dev, acpi_handle handle) { struct acpi_device *acpi_dev; diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index d916bea..7167071 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -79,6 +79,7 @@ static acpi_osd_handler acpi_irq_handler; static void *acpi_irq_context; static struct workqueue_struct *kacpid_wq; static struct workqueue_struct *kacpi_notify_wq; +static struct workqueue_struct *kacpi_hotplug_wq; struct acpi_res_list { resource_size_t start; @@ -192,8 +193,10 @@ acpi_status acpi_os_initialize1(void) { kacpid_wq = create_singlethread_workqueue("kacpid"); kacpi_notify_wq = create_singlethread_workqueue("kacpi_notify"); + kacpi_hotplug_wq = create_singlethread_workqueue("kacpi_hotplug"); BUG_ON(!kacpid_wq); BUG_ON(!kacpi_notify_wq); + BUG_ON(!kacpi_hotplug_wq); return AE_OK; } @@ -206,6 +209,7 @@ acpi_status acpi_os_terminate(void) destroy_workqueue(kacpid_wq); destroy_workqueue(kacpi_notify_wq); + destroy_workqueue(kacpi_hotplug_wq); return AE_OK; } @@ -716,6 +720,7 @@ static acpi_status __acpi_os_execute(acpi_execute_type type, acpi_status status = AE_OK; struct acpi_os_dpc *dpc; struct workqueue_struct *queue; + work_func_t func; int ret; ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Scheduling function [%p(%p)] for deferred execution.\n", @@ -740,15 +745,17 @@ static acpi_status __acpi_os_execute(acpi_execute_type type, dpc->function = function; dpc->context = context; - if (!hp) { - INIT_WORK(&dpc->work, acpi_os_execute_deferred); - queue = (type == OSL_NOTIFY_HANDLER) ? - kacpi_notify_wq : kacpid_wq; - ret = queue_work(queue, &dpc->work); - } else { - INIT_WORK(&dpc->work, acpi_os_execute_hp_deferred); - ret = schedule_work(&dpc->work); - } + /* + * We can't run hotplug code in keventd_wq/kacpid_wq/kacpid_notify_wq + * because the hotplug code may call driver .remove() functions, + * which invoke flush_scheduled_work/acpi_os_wait_events_complete + * to flush these workqueues. + */ + queue = hp ? kacpi_hotplug_wq : + (type == OSL_NOTIFY_HANDLER ? kacpi_notify_wq : kacpid_wq); + func = hp ? acpi_os_execute_hp_deferred : acpi_os_execute_deferred; + INIT_WORK(&dpc->work, func); + ret = queue_work(queue, &dpc->work); if (!ret) { printk(KERN_ERR PREFIX diff --git a/drivers/acpi/pci_bind.c b/drivers/acpi/pci_bind.c index bc46de3..a5a77b7 100644 --- a/drivers/acpi/pci_bind.c +++ b/drivers/acpi/pci_bind.c @@ -24,12 +24,7 @@ */ #include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> #include <linux/types.h> -#include <linux/proc_fs.h> -#include <linux/spinlock.h> -#include <linux/pm.h> #include <linux/pci.h> #include <linux/acpi.h> #include <acpi/acpi_bus.h> @@ -38,310 +33,76 @@ #define _COMPONENT ACPI_PCI_COMPONENT ACPI_MODULE_NAME("pci_bind"); -struct acpi_pci_data { - struct acpi_pci_id id; - struct pci_bus *bus; - struct pci_dev *dev; -}; - -static int acpi_pci_unbind(struct acpi_device *device); - -static void acpi_pci_data_handler(acpi_handle handle, u32 function, - void *context) -{ - - /* TBD: Anything we need to do here? */ - - return; -} - -/** - * acpi_get_pci_id - * ------------------ - * This function is used by the ACPI Interpreter (a.k.a. Core Subsystem) - * to resolve PCI information for ACPI-PCI devices defined in the namespace. - * This typically occurs when resolving PCI operation region information. - */ -acpi_status acpi_get_pci_id(acpi_handle handle, struct acpi_pci_id *id) +static int acpi_pci_unbind(struct acpi_device *device) { - int result = 0; - acpi_status status = AE_OK; - struct acpi_device *device = NULL; - struct acpi_pci_data *data = NULL; - - - if (!id) - return AE_BAD_PARAMETER; - - result = acpi_bus_get_device(handle, &device); - if (result) { - printk(KERN_ERR PREFIX - "Invalid ACPI Bus context for device %s\n", - acpi_device_bid(device)); - return AE_NOT_EXIST; - } - - status = acpi_get_data(handle, acpi_pci_data_handler, (void **)&data); - if (ACPI_FAILURE(status) || !data) { - ACPI_EXCEPTION((AE_INFO, status, - "Invalid ACPI-PCI context for device %s", - acpi_device_bid(device))); - return status; - } + struct pci_dev *dev; - *id = data->id; + dev = acpi_get_pci_dev(device->handle); + if (!dev || !dev->subordinate) + goto out; - /* - id->segment = data->id.segment; - id->bus = data->id.bus; - id->device = data->id.device; - id->function = data->id.function; - */ + acpi_pci_irq_del_prt(dev->subordinate); - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Device %s has PCI address %04x:%02x:%02x.%d\n", - acpi_device_bid(device), id->segment, id->bus, - id->device, id->function)); + device->ops.bind = NULL; + device->ops.unbind = NULL; - return AE_OK; +out: + pci_dev_put(dev); + return 0; } -EXPORT_SYMBOL(acpi_get_pci_id); - -int acpi_pci_bind(struct acpi_device *device) +static int acpi_pci_bind(struct acpi_device *device) { - int result = 0; acpi_status status; - struct acpi_pci_data *data; - struct acpi_pci_data *pdata; - struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; acpi_handle handle; + struct pci_bus *bus; + struct pci_dev *dev; - if (!device || !device->parent) - return -EINVAL; - - data = kzalloc(sizeof(struct acpi_pci_data), GFP_KERNEL); - if (!data) - return -ENOMEM; - - status = acpi_get_name(device->handle, ACPI_FULL_PATHNAME, &buffer); - if (ACPI_FAILURE(status)) { - kfree(data); - return -ENODEV; - } - - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Binding PCI device [%s]...\n", - (char *)buffer.pointer)); - - /* - * Segment & Bus - * ------------- - * These are obtained via the parent device's ACPI-PCI context. - */ - status = acpi_get_data(device->parent->handle, acpi_pci_data_handler, - (void **)&pdata); - if (ACPI_FAILURE(status) || !pdata || !pdata->bus) { - ACPI_EXCEPTION((AE_INFO, status, - "Invalid ACPI-PCI context for parent device %s", - acpi_device_bid(device->parent))); - result = -ENODEV; - goto end; - } - data->id.segment = pdata->id.segment; - data->id.bus = pdata->bus->number; - - /* - * Device & Function - * ----------------- - * These are simply obtained from the device's _ADR method. Note - * that a value of zero is valid. - */ - data->id.device = device->pnp.bus_address >> 16; - data->id.function = device->pnp.bus_address & 0xFFFF; - - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "...to %04x:%02x:%02x.%d\n", - data->id.segment, data->id.bus, data->id.device, - data->id.function)); - - /* - * TBD: Support slot devices (e.g. function=0xFFFF). - */ - - /* - * Locate PCI Device - * ----------------- - * Locate matching device in PCI namespace. If it doesn't exist - * this typically means that the device isn't currently inserted - * (e.g. docking station, port replicator, etc.). - */ - data->dev = pci_get_slot(pdata->bus, - PCI_DEVFN(data->id.device, data->id.function)); - if (!data->dev) { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Device %04x:%02x:%02x.%d not present in PCI namespace\n", - data->id.segment, data->id.bus, - data->id.device, data->id.function)); - result = -ENODEV; - goto end; - } - if (!data->dev->bus) { - printk(KERN_ERR PREFIX - "Device %04x:%02x:%02x.%d has invalid 'bus' field\n", - data->id.segment, data->id.bus, - data->id.device, data->id.function); - result = -ENODEV; - goto end; - } + dev = acpi_get_pci_dev(device->handle); + if (!dev) + return 0; /* - * PCI Bridge? - * ----------- - * If so, set the 'bus' field and install the 'bind' function to - * facilitate callbacks for all of its children. + * Install the 'bind' function to facilitate callbacks for + * children of the P2P bridge. */ - if (data->dev->subordinate) { + if (dev->subordinate) { ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device %04x:%02x:%02x.%d is a PCI bridge\n", - data->id.segment, data->id.bus, - data->id.device, data->id.function)); - data->bus = data->dev->subordinate; + pci_domain_nr(dev->bus), dev->bus->number, + PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn))); device->ops.bind = acpi_pci_bind; device->ops.unbind = acpi_pci_unbind; } /* - * Attach ACPI-PCI Context - * ----------------------- - * Thus binding the ACPI and PCI devices. - */ - status = acpi_attach_data(device->handle, acpi_pci_data_handler, data); - if (ACPI_FAILURE(status)) { - ACPI_EXCEPTION((AE_INFO, status, - "Unable to attach ACPI-PCI context to device %s", - acpi_device_bid(device))); - result = -ENODEV; - goto end; - } - - /* - * PCI Routing Table - * ----------------- - * Evaluate and parse _PRT, if exists. This code is independent of - * PCI bridges (above) to allow parsing of _PRT objects within the - * scope of non-bridge devices. Note that _PRTs within the scope of - * a PCI bridge assume the bridge's subordinate bus number. + * Evaluate and parse _PRT, if exists. This code allows parsing of + * _PRT objects within the scope of non-bridge devices. Note that + * _PRTs within the scope of a PCI bridge assume the bridge's + * subordinate bus number. * * TBD: Can _PRTs exist within the scope of non-bridge PCI devices? */ status = acpi_get_handle(device->handle, METHOD_NAME__PRT, &handle); - if (ACPI_SUCCESS(status)) { - if (data->bus) /* PCI-PCI bridge */ - acpi_pci_irq_add_prt(device->handle, data->id.segment, - data->bus->number); - else /* non-bridge PCI device */ - acpi_pci_irq_add_prt(device->handle, data->id.segment, - data->id.bus); - } - - end: - kfree(buffer.pointer); - if (result) { - pci_dev_put(data->dev); - kfree(data); - } - return result; -} - -static int acpi_pci_unbind(struct acpi_device *device) -{ - int result = 0; - acpi_status status; - struct acpi_pci_data *data; - struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; - - - if (!device || !device->parent) - return -EINVAL; - - status = acpi_get_name(device->handle, ACPI_FULL_PATHNAME, &buffer); if (ACPI_FAILURE(status)) - return -ENODEV; + goto out; - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Unbinding PCI device [%s]...\n", - (char *) buffer.pointer)); - kfree(buffer.pointer); + if (dev->subordinate) + bus = dev->subordinate; + else + bus = dev->bus; - status = - acpi_get_data(device->handle, acpi_pci_data_handler, - (void **)&data); - if (ACPI_FAILURE(status)) { - result = -ENODEV; - goto end; - } + acpi_pci_irq_add_prt(device->handle, bus); - status = acpi_detach_data(device->handle, acpi_pci_data_handler); - if (ACPI_FAILURE(status)) { - ACPI_EXCEPTION((AE_INFO, status, - "Unable to detach data from device %s", - acpi_device_bid(device))); - result = -ENODEV; - goto end; - } - if (data->dev->subordinate) { - acpi_pci_irq_del_prt(data->id.segment, data->bus->number); - } - pci_dev_put(data->dev); - kfree(data); - - end: - return result; +out: + pci_dev_put(dev); + return 0; } -int -acpi_pci_bind_root(struct acpi_device *device, - struct acpi_pci_id *id, struct pci_bus *bus) +int acpi_pci_bind_root(struct acpi_device *device) { - int result = 0; - acpi_status status; - struct acpi_pci_data *data = NULL; - struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; - - if (!device || !id || !bus) { - return -EINVAL; - } - - data = kzalloc(sizeof(struct acpi_pci_data), GFP_KERNEL); - if (!data) - return -ENOMEM; - - data->id = *id; - data->bus = bus; device->ops.bind = acpi_pci_bind; device->ops.unbind = acpi_pci_unbind; - status = acpi_get_name(device->handle, ACPI_FULL_PATHNAME, &buffer); - if (ACPI_FAILURE(status)) { - kfree (data); - return -ENODEV; - } - - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Binding PCI root bridge [%s] to " - "%04x:%02x\n", (char *)buffer.pointer, - id->segment, id->bus)); - - status = acpi_attach_data(device->handle, acpi_pci_data_handler, data); - if (ACPI_FAILURE(status)) { - ACPI_EXCEPTION((AE_INFO, status, - "Unable to attach ACPI-PCI context to device %s", - (char *)buffer.pointer)); - result = -ENODEV; - goto end; - } - - end: - kfree(buffer.pointer); - if (result != 0) - kfree(data); - - return result; + return 0; } diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c index 2faa9e2..b794eb8 100644 --- a/drivers/acpi/pci_irq.c +++ b/drivers/acpi/pci_irq.c @@ -182,7 +182,7 @@ static void do_prt_fixups(struct acpi_prt_entry *entry, } } -static int acpi_pci_irq_add_entry(acpi_handle handle, int segment, int bus, +static int acpi_pci_irq_add_entry(acpi_handle handle, struct pci_bus *bus, struct acpi_pci_routing_table *prt) { struct acpi_prt_entry *entry; @@ -196,8 +196,8 @@ static int acpi_pci_irq_add_entry(acpi_handle handle, int segment, int bus, * 1=INTA, 2=INTB. We use the PCI encoding throughout, so convert * it here. */ - entry->id.segment = segment; - entry->id.bus = bus; + entry->id.segment = pci_domain_nr(bus); + entry->id.bus = bus->number; entry->id.device = (prt->address >> 16) & 0xFFFF; entry->pin = prt->pin + 1; @@ -242,7 +242,7 @@ static int acpi_pci_irq_add_entry(acpi_handle handle, int segment, int bus, return 0; } -int acpi_pci_irq_add_prt(acpi_handle handle, int segment, int bus) +int acpi_pci_irq_add_prt(acpi_handle handle, struct pci_bus *bus) { acpi_status status; struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; @@ -271,7 +271,7 @@ int acpi_pci_irq_add_prt(acpi_handle handle, int segment, int bus) entry = buffer.pointer; while (entry && (entry->length > 0)) { - acpi_pci_irq_add_entry(handle, segment, bus, entry); + acpi_pci_irq_add_entry(handle, bus, entry); entry = (struct acpi_pci_routing_table *) ((unsigned long)entry + entry->length); } @@ -280,16 +280,17 @@ int acpi_pci_irq_add_prt(acpi_handle handle, int segment, int bus) return 0; } -void acpi_pci_irq_del_prt(int segment, int bus) +void acpi_pci_irq_del_prt(struct pci_bus *bus) { struct acpi_prt_entry *entry, *tmp; printk(KERN_DEBUG "ACPI: Delete PCI Interrupt Routing Table for %04x:%02x\n", - segment, bus); + pci_domain_nr(bus), bus->number); spin_lock(&acpi_prt_lock); list_for_each_entry_safe(entry, tmp, &acpi_prt_list, list) { - if (segment == entry->id.segment && bus == entry->id.bus) { + if (pci_domain_nr(bus) == entry->id.segment + && bus->number == entry->id.bus) { list_del(&entry->list); kfree(entry); } diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c index 196f97d..8a5bf3b 100644 --- a/drivers/acpi/pci_root.c +++ b/drivers/acpi/pci_root.c @@ -63,9 +63,10 @@ static struct acpi_driver acpi_pci_root_driver = { struct acpi_pci_root { struct list_head node; - struct acpi_device * device; - struct acpi_pci_id id; + struct acpi_device *device; struct pci_bus *bus; + u16 segment; + u8 bus_nr; u32 osc_support_set; /* _OSC state of support bits */ u32 osc_control_set; /* _OSC state of control bits */ @@ -82,7 +83,7 @@ static DEFINE_MUTEX(osc_lock); int acpi_pci_register_driver(struct acpi_pci_driver *driver) { int n = 0; - struct list_head *entry; + struct acpi_pci_root *root; struct acpi_pci_driver **pptr = &sub_driver; while (*pptr) @@ -92,9 +93,7 @@ int acpi_pci_register_driver(struct acpi_pci_driver *driver) if (!driver->add) return 0; - list_for_each(entry, &acpi_pci_roots) { - struct acpi_pci_root *root; - root = list_entry(entry, struct acpi_pci_root, node); + list_for_each_entry(root, &acpi_pci_roots, node) { driver->add(root->device->handle); n++; } @@ -106,7 +105,7 @@ EXPORT_SYMBOL(acpi_pci_register_driver); void acpi_pci_unregister_driver(struct acpi_pci_driver *driver) { - struct list_head *entry; + struct acpi_pci_root *root; struct acpi_pci_driver **pptr = &sub_driver; while (*pptr) { @@ -120,28 +119,48 @@ void acpi_pci_unregister_driver(struct acpi_pci_driver *driver) if (!driver->remove) return; - list_for_each(entry, &acpi_pci_roots) { - struct acpi_pci_root *root; - root = list_entry(entry, struct acpi_pci_root, node); + list_for_each_entry(root, &acpi_pci_roots, node) driver->remove(root->device->handle); - } } EXPORT_SYMBOL(acpi_pci_unregister_driver); acpi_handle acpi_get_pci_rootbridge_handle(unsigned int seg, unsigned int bus) { - struct acpi_pci_root *tmp; + struct acpi_pci_root *root; - list_for_each_entry(tmp, &acpi_pci_roots, node) { - if ((tmp->id.segment == (u16) seg) && (tmp->id.bus == (u16) bus)) - return tmp->device->handle; - } + list_for_each_entry(root, &acpi_pci_roots, node) + if ((root->segment == (u16) seg) && (root->bus_nr == (u16) bus)) + return root->device->handle; return NULL; } EXPORT_SYMBOL_GPL(acpi_get_pci_rootbridge_handle); +/** + * acpi_is_root_bridge - determine whether an ACPI CA node is a PCI root bridge + * @handle - the ACPI CA node in question. + * + * Note: we could make this API take a struct acpi_device * instead, but + * for now, it's more convenient to operate on an acpi_handle. + */ +int acpi_is_root_bridge(acpi_handle handle) +{ + int ret; + struct acpi_device *device; + + ret = acpi_bus_get_device(handle, &device); + if (ret) + return 0; + + ret = acpi_match_device_ids(device, root_device_ids); + if (ret) + return 0; + else + return 1; +} +EXPORT_SYMBOL_GPL(acpi_is_root_bridge); + static acpi_status get_root_bridge_busnr_callback(struct acpi_resource *resource, void *data) { @@ -161,19 +180,22 @@ get_root_bridge_busnr_callback(struct acpi_resource *resource, void *data) return AE_OK; } -static acpi_status try_get_root_bridge_busnr(acpi_handle handle, int *busnum) +static acpi_status try_get_root_bridge_busnr(acpi_handle handle, + unsigned long long *bus) { acpi_status status; + int busnum; - *busnum = -1; + busnum = -1; status = acpi_walk_resources(handle, METHOD_NAME__CRS, - get_root_bridge_busnr_callback, busnum); + get_root_bridge_busnr_callback, &busnum); if (ACPI_FAILURE(status)) return status; /* Check if we really get a bus number from _CRS */ - if (*busnum == -1) + if (busnum == -1) return AE_ERROR; + *bus = busnum; return AE_OK; } @@ -298,6 +320,7 @@ static acpi_status acpi_pci_osc_support(struct acpi_pci_root *root, u32 flags) static struct acpi_pci_root *acpi_pci_find_root(acpi_handle handle) { struct acpi_pci_root *root; + list_for_each_entry(root, &acpi_pci_roots, node) { if (root->device->handle == handle) return root; @@ -305,6 +328,87 @@ static struct acpi_pci_root *acpi_pci_find_root(acpi_handle handle) return NULL; } +struct acpi_handle_node { + struct list_head node; + acpi_handle handle; +}; + +/** + * acpi_get_pci_dev - convert ACPI CA handle to struct pci_dev + * @handle: the handle in question + * + * Given an ACPI CA handle, the desired PCI device is located in the + * list of PCI devices. + * + * If the device is found, its reference count is increased and this + * function returns a pointer to its data structure. The caller must + * decrement the reference count by calling pci_dev_put(). + * If no device is found, %NULL is returned. + */ +struct pci_dev *acpi_get_pci_dev(acpi_handle handle) +{ + int dev, fn; + unsigned long long adr; + acpi_status status; + acpi_handle phandle; + struct pci_bus *pbus; + struct pci_dev *pdev = NULL; + struct acpi_handle_node *node, *tmp; + struct acpi_pci_root *root; + LIST_HEAD(device_list); + + /* + * Walk up the ACPI CA namespace until we reach a PCI root bridge. + */ + phandle = handle; + while (!acpi_is_root_bridge(phandle)) { + node = kzalloc(sizeof(struct acpi_handle_node), GFP_KERNEL); + if (!node) + goto out; + + INIT_LIST_HEAD(&node->node); + node->handle = phandle; + list_add(&node->node, &device_list); + + status = acpi_get_parent(phandle, &phandle); + if (ACPI_FAILURE(status)) + goto out; + } + + root = acpi_pci_find_root(phandle); + if (!root) + goto out; + + pbus = root->bus; + + /* + * Now, walk back down the PCI device tree until we return to our + * original handle. Assumes that everything between the PCI root + * bridge and the device we're looking for must be a P2P bridge. + */ + list_for_each_entry(node, &device_list, node) { + acpi_handle hnd = node->handle; + status = acpi_evaluate_integer(hnd, "_ADR", NULL, &adr); + if (ACPI_FAILURE(status)) + goto out; + dev = (adr >> 16) & 0xffff; + fn = adr & 0xffff; + + pdev = pci_get_slot(pbus, PCI_DEVFN(dev, fn)); + if (hnd == handle) + break; + + pbus = pdev->subordinate; + pci_dev_put(pdev); + } +out: + list_for_each_entry_safe(node, tmp, &device_list, node) + kfree(node); + + return pdev; +} +EXPORT_SYMBOL_GPL(acpi_get_pci_dev); + /** * acpi_pci_osc_control_set - commit requested control to Firmware * @handle: acpi_handle for the target ACPI object @@ -363,31 +467,46 @@ EXPORT_SYMBOL(acpi_pci_osc_control_set); static int __devinit acpi_pci_root_add(struct acpi_device *device) { - int result = 0; - struct acpi_pci_root *root = NULL; - struct acpi_pci_root *tmp; - acpi_status status = AE_OK; - unsigned long long value = 0; - acpi_handle handle = NULL; + unsigned long long segment, bus; + acpi_status status; + int result; + struct acpi_pci_root *root; + acpi_handle handle; struct acpi_device *child; u32 flags, base_flags; + segment = 0; + status = acpi_evaluate_integer(device->handle, METHOD_NAME__SEG, NULL, + &segment); + if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { + printk(KERN_ERR PREFIX "can't evaluate _SEG\n"); + return -ENODEV; + } - if (!device) - return -EINVAL; + /* Check _CRS first, then _BBN. If no _BBN, default to zero. */ + bus = 0; + status = try_get_root_bridge_busnr(device->handle, &bus); + if (ACPI_FAILURE(status)) { + status = acpi_evaluate_integer(device->handle, METHOD_NAME__BBN, NULL, &bus); + if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { + printk(KERN_ERR PREFIX + "no bus number in _CRS and can't evaluate _BBN\n"); + return -ENODEV; + } + } root = kzalloc(sizeof(struct acpi_pci_root), GFP_KERNEL); if (!root) return -ENOMEM; - INIT_LIST_HEAD(&root->node); + INIT_LIST_HEAD(&root->node); root->device = device; + root->segment = segment & 0xFFFF; + root->bus_nr = bus & 0xFF; strcpy(acpi_device_name(device), ACPI_PCI_ROOT_DEVICE_NAME); strcpy(acpi_device_class(device), ACPI_PCI_ROOT_CLASS); device->driver_data = root; - device->ops.bind = acpi_pci_bind; - /* * All supported architectures that use ACPI have support for * PCI domains, so we indicate this in _OSC support capabilities. @@ -395,79 +514,6 @@ static int __devinit acpi_pci_root_add(struct acpi_device *device) flags = base_flags = OSC_PCI_SEGMENT_GROUPS_SUPPORT; acpi_pci_osc_support(root, flags); - /* - * Segment - * ------- - * Obtained via _SEG, if exists, otherwise assumed to be zero (0). - */ - status = acpi_evaluate_integer(device->handle, METHOD_NAME__SEG, NULL, - &value); - switch (status) { - case AE_OK: - root->id.segment = (u16) value; - break; - case AE_NOT_FOUND: - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Assuming segment 0 (no _SEG)\n")); - root->id.segment = 0; - break; - default: - ACPI_EXCEPTION((AE_INFO, status, "Evaluating _SEG")); - result = -ENODEV; - goto end; - } - - /* - * Bus - * --- - * Obtained via _BBN, if exists, otherwise assumed to be zero (0). - */ - status = acpi_evaluate_integer(device->handle, METHOD_NAME__BBN, NULL, - &value); - switch (status) { - case AE_OK: - root->id.bus = (u16) value; - break; - case AE_NOT_FOUND: - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Assuming bus 0 (no _BBN)\n")); - root->id.bus = 0; - break; - default: - ACPI_EXCEPTION((AE_INFO, status, "Evaluating _BBN")); - result = -ENODEV; - goto end; - } - - /* Some systems have wrong _BBN */ - list_for_each_entry(tmp, &acpi_pci_roots, node) { - if ((tmp->id.segment == root->id.segment) - && (tmp->id.bus == root->id.bus)) { - int bus = 0; - acpi_status status; - - printk(KERN_ERR PREFIX - "Wrong _BBN value, reboot" - " and use option 'pci=noacpi'\n"); - - status = try_get_root_bridge_busnr(device->handle, &bus); - if (ACPI_FAILURE(status)) - break; - if (bus != root->id.bus) { - printk(KERN_INFO PREFIX - "PCI _CRS %d overrides _BBN 0\n", bus); - root->id.bus = bus; - } - break; - } - } - /* - * Device & Function - * ----------------- - * Obtained from _ADR (which has already been evaluated for us). - */ - root->id.device = device->pnp.bus_address >> 16; - root->id.function = device->pnp.bus_address & 0xFFFF; - /* * TBD: Need PCI interface for enumeration/configuration of roots. */ @@ -477,7 +523,7 @@ static int __devinit acpi_pci_root_add(struct acpi_device *device) printk(KERN_INFO PREFIX "%s [%s] (%04x:%02x)\n", acpi_device_name(device), acpi_device_bid(device), - root->id.segment, root->id.bus); + root->segment, root->bus_nr); /* * Scan the Root Bridge @@ -486,11 +532,11 @@ static int __devinit acpi_pci_root_add(struct acpi_device *device) * PCI namespace does not get created until this call is made (and * thus the root bridge's pci_dev does not exist). */ - root->bus = pci_acpi_scan_root(device, root->id.segment, root->id.bus); + root->bus = pci_acpi_scan_root(device, segment, bus); if (!root->bus) { printk(KERN_ERR PREFIX "Bus %04x:%02x not present in PCI namespace\n", - root->id.segment, root->id.bus); + root->segment, root->bus_nr); result = -ENODEV; goto end; } @@ -500,7 +546,7 @@ static int __devinit acpi_pci_root_add(struct acpi_device *device) * ----------------------- * Thus binding the ACPI and PCI devices. */ - result = acpi_pci_bind_root(device, &root->id, root->bus); + result = acpi_pci_bind_root(device); if (result) goto end; @@ -511,8 +557,7 @@ static int __devinit acpi_pci_root_add(struct acpi_device *device) */ status = acpi_get_handle(device->handle, METHOD_NAME__PRT, &handle); if (ACPI_SUCCESS(status)) - result = acpi_pci_irq_add_prt(device->handle, root->id.segment, - root->id.bus); + result = acpi_pci_irq_add_prt(device->handle, root->bus); /* * Scan and bind all _ADR-Based Devices @@ -531,42 +576,28 @@ static int __devinit acpi_pci_root_add(struct acpi_device *device) if (flags != base_flags) acpi_pci_osc_support(root, flags); - end: - if (result) { - if (!list_empty(&root->node)) - list_del(&root->node); - kfree(root); - } + return 0; +end: + if (!list_empty(&root->node)) + list_del(&root->node); + kfree(root); return result; } static int acpi_pci_root_start(struct acpi_device *device) { - struct acpi_pci_root *root; + struct acpi_pci_root *root = acpi_driver_data(device); - - list_for_each_entry(root, &acpi_pci_roots, node) { - if (root->device == device) { - pci_bus_add_devices(root->bus); - return 0; - } - } - return -ENODEV; + pci_bus_add_devices(root->bus); + return 0; } static int acpi_pci_root_remove(struct acpi_device *device, int type) { - struct acpi_pci_root *root = NULL; - - - if (!device || !acpi_driver_data(device)) - return -EINVAL; - - root = acpi_driver_data(device); + struct acpi_pci_root *root = acpi_driver_data(device); kfree(root); - return 0; } diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index 56665a6..d74365d 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -194,7 +194,7 @@ static int acpi_power_get_list_state(struct acpi_handle_list *list, int *state) static int acpi_power_on(acpi_handle handle, struct acpi_device *dev) { - int result = 0, state; + int result = 0; int found = 0; acpi_status status = AE_OK; struct acpi_power_resource *resource = NULL; @@ -236,18 +236,6 @@ static int acpi_power_on(acpi_handle handle, struct acpi_device *dev) if (ACPI_FAILURE(status)) return -ENODEV; - if (!acpi_power_nocheck) { - /* - * If acpi_power_nocheck is set, it is unnecessary to check - * the power state after power transition. - */ - result = acpi_power_get_state(resource->device->handle, - &state); - if (result) - return result; - if (state != ACPI_POWER_RESOURCE_STATE_ON) - return -ENOEXEC; - } /* Update the power resource's _device_ power state */ resource->device->power.state = ACPI_STATE_D0; @@ -258,7 +246,7 @@ static int acpi_power_on(acpi_handle handle, struct acpi_device *dev) static int acpi_power_off_device(acpi_handle handle, struct acpi_device *dev) { - int result = 0, state; + int result = 0; acpi_status status = AE_OK; struct acpi_power_resource *resource = NULL; struct list_head *node, *next; @@ -293,18 +281,6 @@ static int acpi_power_off_device(acpi_handle handle, struct acpi_device *dev) if (ACPI_FAILURE(status)) return -ENODEV; - if (!acpi_power_nocheck) { - /* - * If acpi_power_nocheck is set, it is unnecessary to check - * the power state after power transition. - */ - result = acpi_power_get_state(handle, &state); - if (result) - return result; - if (state != ACPI_POWER_RESOURCE_STATE_OFF) - return -ENOEXEC; - } - /* Update the power resource's _device_ power state */ resource->device->power.state = ACPI_STATE_D3; diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 23f0fb8..84e0f3c 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -89,7 +89,7 @@ static int acpi_processor_handle_eject(struct acpi_processor *pr); static const struct acpi_device_id processor_device_ids[] = { {ACPI_PROCESSOR_OBJECT_HID, 0}, - {ACPI_PROCESSOR_HID, 0}, + {"ACPI0007", 0}, {"", 0}, }; MODULE_DEVICE_TABLE(acpi, processor_device_ids); @@ -596,7 +596,21 @@ static int acpi_processor_get_info(struct acpi_device *device) ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No bus mastering arbitration control\n")); - if (!strcmp(acpi_device_hid(device), ACPI_PROCESSOR_HID)) { + if (!strcmp(acpi_device_hid(device), ACPI_PROCESSOR_OBJECT_HID)) { + /* Declared with "Processor" statement; match ProcessorID */ + status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer); + if (ACPI_FAILURE(status)) { + printk(KERN_ERR PREFIX "Evaluating processor object\n"); + return -ENODEV; + } + + /* + * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP. + * >>> 'acpi_get_processor_id(acpi_id, &id)' in + * arch/xxx/acpi.c + */ + pr->acpi_id = object.processor.proc_id; + } else { /* * Declared with "Device" statement; match _UID. * Note that we don't handle string _UIDs yet. @@ -611,20 +625,6 @@ static int acpi_processor_get_info(struct acpi_device *device) } device_declaration = 1; pr->acpi_id = value; - } else { - /* Declared with "Processor" statement; match ProcessorID */ - status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer); - if (ACPI_FAILURE(status)) { - printk(KERN_ERR PREFIX "Evaluating processor object\n"); - return -ENODEV; - } - - /* - * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP. - * >>> 'acpi_get_processor_id(acpi_id, &id)' in - * arch/xxx/acpi.c - */ - pr->acpi_id = object.processor.proc_id; } cpu_index = get_cpu_id(pr->handle, device_declaration, pr->acpi_id); @@ -649,7 +649,16 @@ static int acpi_processor_get_info(struct acpi_device *device) return -ENODEV; } } - + /* + * On some boxes several processors use the same processor bus id. + * But they are located in different scope. For example: + * \_SB.SCK0.CPU0 + * \_SB.SCK1.CPU0 + * Rename the processor device bus id. And the new bus id will be + * generated as the following format: + * CPU+CPU ID. + */ + sprintf(acpi_device_bid(device), "CPU%X", pr->id); ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Processor [%d:%d]\n", pr->id, pr->acpi_id)); @@ -731,6 +740,8 @@ static int __cpuinit acpi_processor_start(struct acpi_device *device) /* _PDC call should be done before doing anything else (if reqd.). */ arch_acpi_processor_init_pdc(pr); acpi_processor_set_pdc(pr); + arch_acpi_processor_cleanup_pdc(pr); + #ifdef CONFIG_CPU_FREQ acpi_processor_ppc_has_changed(pr); #endif diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 10a2d91..0efa59e 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -139,7 +139,7 @@ static void acpi_safe_halt(void) * are affected too. We pick the most conservative approach: we assume * that the local APIC stops in both C2 and C3. */ -static void acpi_timer_check_state(int state, struct acpi_processor *pr, +static void lapic_timer_check_state(int state, struct acpi_processor *pr, struct acpi_processor_cx *cx) { struct acpi_processor_power *pwr = &pr->power; @@ -162,7 +162,7 @@ static void acpi_timer_check_state(int state, struct acpi_processor *pr, pr->power.timer_broadcast_on_state = state; } -static void acpi_propagate_timer_broadcast(struct acpi_processor *pr) +static void lapic_timer_propagate_broadcast(struct acpi_processor *pr) { unsigned long reason; @@ -173,7 +173,7 @@ static void acpi_propagate_timer_broadcast(struct acpi_processor *pr) } /* Power(C) State timer broadcast control */ -static void acpi_state_timer_broadcast(struct acpi_processor *pr, +static void lapic_timer_state_broadcast(struct acpi_processor *pr, struct acpi_processor_cx *cx, int broadcast) { @@ -190,10 +190,10 @@ static void acpi_state_timer_broadcast(struct acpi_processor *pr, #else -static void acpi_timer_check_state(int state, struct acpi_processor *pr, +static void lapic_timer_check_state(int state, struct acpi_processor *pr, struct acpi_processor_cx *cstate) { } -static void acpi_propagate_timer_broadcast(struct acpi_processor *pr) { } -static void acpi_state_timer_broadcast(struct acpi_processor *pr, +static void lapic_timer_propagate_broadcast(struct acpi_processor *pr) { } +static void lapic_timer_state_broadcast(struct acpi_processor *pr, struct acpi_processor_cx *cx, int broadcast) { @@ -515,7 +515,8 @@ static void acpi_processor_power_verify_c2(struct acpi_processor_cx *cx) static void acpi_processor_power_verify_c3(struct acpi_processor *pr, struct acpi_processor_cx *cx) { - static int bm_check_flag; + static int bm_check_flag = -1; + static int bm_control_flag = -1; if (!cx->address) @@ -545,12 +546,14 @@ static void acpi_processor_power_verify_c3(struct acpi_processor *pr, } /* All the logic here assumes flags.bm_check is same across all CPUs */ - if (!bm_check_flag) { + if (bm_check_flag == -1) { /* Determine whether bm_check is needed based on CPU */ acpi_processor_power_init_bm_check(&(pr->flags), pr->id); bm_check_flag = pr->flags.bm_check; + bm_control_flag = pr->flags.bm_control; } else { pr->flags.bm_check = bm_check_flag; + pr->flags.bm_control = bm_control_flag; } if (pr->flags.bm_check) { @@ -614,29 +617,25 @@ static int acpi_processor_power_verify(struct acpi_processor *pr) switch (cx->type) { case ACPI_STATE_C1: cx->valid = 1; - acpi_timer_check_state(i, pr, cx); break; case ACPI_STATE_C2: acpi_processor_power_verify_c2(cx); - if (cx->valid) - acpi_timer_check_state(i, pr, cx); break; case ACPI_STATE_C3: acpi_processor_power_verify_c3(pr, cx); - if (cx->valid) - acpi_timer_check_state(i, pr, cx); break; } - if (cx->valid) - tsc_check_state(cx->type); + if (!cx->valid) + continue; - if (cx->valid) - working++; + lapic_timer_check_state(i, pr, cx); + tsc_check_state(cx->type); + working++; } - acpi_propagate_timer_broadcast(pr); + lapic_timer_propagate_broadcast(pr); return (working); } @@ -839,7 +838,7 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev, return 0; } - acpi_state_timer_broadcast(pr, cx, 1); + lapic_timer_state_broadcast(pr, cx, 1); kt1 = ktime_get_real(); acpi_idle_do_entry(cx); kt2 = ktime_get_real(); @@ -847,7 +846,7 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev, local_irq_enable(); cx->usage++; - acpi_state_timer_broadcast(pr, cx, 0); + lapic_timer_state_broadcast(pr, cx, 0); return idle_time; } @@ -892,7 +891,7 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev, * Must be done before busmaster disable as we might need to * access HPET ! */ - acpi_state_timer_broadcast(pr, cx, 1); + lapic_timer_state_broadcast(pr, cx, 1); if (cx->type == ACPI_STATE_C3) ACPI_FLUSH_CPU_CACHE(); @@ -914,7 +913,7 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev, cx->usage++; - acpi_state_timer_broadcast(pr, cx, 0); + lapic_timer_state_broadcast(pr, cx, 0); cx->time += sleep_ticks; return idle_time; } @@ -981,7 +980,7 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, * Must be done before busmaster disable as we might need to * access HPET ! */ - acpi_state_timer_broadcast(pr, cx, 1); + lapic_timer_state_broadcast(pr, cx, 1); kt1 = ktime_get_real(); /* @@ -1026,7 +1025,7 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, cx->usage++; - acpi_state_timer_broadcast(pr, cx, 0); + lapic_timer_state_broadcast(pr, cx, 0); cx->time += sleep_ticks; return idle_time; } diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 8ff510b..781435d 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -95,7 +95,7 @@ acpi_device_modalias_show(struct device *dev, struct device_attribute *attr, cha } static DEVICE_ATTR(modalias, 0444, acpi_device_modalias_show, NULL); -static int acpi_bus_hot_remove_device(void *context) +static void acpi_bus_hot_remove_device(void *context) { struct acpi_device *device; acpi_handle handle = context; @@ -104,10 +104,10 @@ static int acpi_bus_hot_remove_device(void *context) acpi_status status = AE_OK; if (acpi_bus_get_device(handle, &device)) - return 0; + return; if (!device) - return 0; + return; ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Hot-removing device %s...\n", dev_name(&device->dev))); @@ -115,7 +115,7 @@ static int acpi_bus_hot_remove_device(void *context) if (acpi_bus_trim(device, 1)) { printk(KERN_ERR PREFIX "Removing device failed\n"); - return -1; + return; } /* power off device */ @@ -142,9 +142,10 @@ static int acpi_bus_hot_remove_device(void *context) */ status = acpi_evaluate_object(handle, "_EJ0", &arg_list, NULL); if (ACPI_FAILURE(status)) - return -ENODEV; + printk(KERN_WARNING PREFIX + "Eject device failed\n"); - return 0; + return; } static ssize_t @@ -155,7 +156,6 @@ acpi_eject_store(struct device *d, struct device_attribute *attr, acpi_status status; acpi_object_type type = 0; struct acpi_device *acpi_device = to_acpi_device(d); - struct task_struct *task; if ((!count) || (buf[0] != '1')) { return -EINVAL; @@ -172,11 +172,7 @@ acpi_eject_store(struct device *d, struct device_attribute *attr, goto err; } - /* remove the device in another thread to fix the deadlock issue */ - task = kthread_run(acpi_bus_hot_remove_device, - acpi_device->handle, "acpi_hot_remove_device"); - if (IS_ERR(task)) - ret = PTR_ERR(task); + acpi_os_hotplug_execute(acpi_bus_hot_remove_device, acpi_device->handle); err: return ret; } @@ -198,12 +194,12 @@ acpi_device_path_show(struct device *dev, struct device_attribute *attr, char *b int result; result = acpi_get_name(acpi_dev->handle, ACPI_FULL_PATHNAME, &path); - if(result) + if (result) goto end; result = sprintf(buf, "%s\n", (char*)path.pointer); kfree(path.pointer); - end: +end: return result; } static DEVICE_ATTR(path, 0444, acpi_device_path_show, NULL); @@ -217,21 +213,21 @@ static int acpi_device_setup_files(struct acpi_device *dev) /* * Devices gotten from FADT don't have a "path" attribute */ - if(dev->handle) { + if (dev->handle) { result = device_create_file(&dev->dev, &dev_attr_path); - if(result) + if (result) goto end; } - if(dev->flags.hardware_id) { + if (dev->flags.hardware_id) { result = device_create_file(&dev->dev, &dev_attr_hid); - if(result) + if (result) goto end; } - if (dev->flags.hardware_id || dev->flags.compatible_ids){ + if (dev->flags.hardware_id || dev->flags.compatible_ids) { result = device_create_file(&dev->dev, &dev_attr_modalias); - if(result) + if (result) goto end; } @@ -242,7 +238,7 @@ static int acpi_device_setup_files(struct acpi_device *dev) status = acpi_get_handle(dev->handle, "_EJ0", &temp); if (ACPI_SUCCESS(status)) result = device_create_file(&dev->dev, &dev_attr_eject); - end: +end: return result; } @@ -262,9 +258,9 @@ static void acpi_device_remove_files(struct acpi_device *dev) if (dev->flags.hardware_id || dev->flags.compatible_ids) device_remove_file(&dev->dev, &dev_attr_modalias); - if(dev->flags.hardware_id) + if (dev->flags.hardware_id) device_remove_file(&dev->dev, &dev_attr_hid); - if(dev->handle) + if (dev->handle) device_remove_file(&dev->dev, &dev_attr_path); } /* -------------------------------------------------------------------------- @@ -512,7 +508,7 @@ static int acpi_device_register(struct acpi_device *device, break; } } - if(!found) { + if (!found) { acpi_device_bus_id = new_bus_id; strcpy(acpi_device_bus_id->bus_id, device->flags.hardware_id ? device->pnp.hardware_id : "device"); acpi_device_bus_id->instance_no = 0; @@ -530,22 +526,21 @@ static int acpi_device_register(struct acpi_device *device, if (device->parent) device->dev.parent = &parent->dev; device->dev.bus = &acpi_bus_type; - device_initialize(&device->dev); device->dev.release = &acpi_device_release; - result = device_add(&device->dev); - if(result) { - dev_err(&device->dev, "Error adding device\n"); + result = device_register(&device->dev); + if (result) { + dev_err(&device->dev, "Error registering device\n"); goto end; } result = acpi_device_setup_files(device); - if(result) + if (result) printk(KERN_ERR PREFIX "Error creating sysfs interface for device %s\n", dev_name(&device->dev)); device->removal_type = ACPI_BUS_REMOVAL_NORMAL; return 0; - end: +end: mutex_lock(&acpi_device_lock); if (device->parent) list_del(&device->node); @@ -577,7 +572,7 @@ static void acpi_device_unregister(struct acpi_device *device, int type) * @device: the device to add and initialize * @driver: driver for the device * - * Used to initialize a device via its device driver. Called whenever a + * Used to initialize a device via its device driver. Called whenever a * driver is bound to a device. Invokes the driver's add() ops. */ static int @@ -585,7 +580,6 @@ acpi_bus_driver_init(struct acpi_device *device, struct acpi_driver *driver) { int result = 0; - if (!device || !driver) return -EINVAL; @@ -802,7 +796,7 @@ static int acpi_bus_get_wakeup_device_flags(struct acpi_device *device) if (!acpi_match_device_ids(device, button_device_ids)) device->wakeup.flags.run_wake = 1; - end: +end: if (ACPI_FAILURE(status)) device->flags.wake_capable = 0; return 0; @@ -1070,7 +1064,7 @@ static void acpi_device_set_id(struct acpi_device *device, break; } - /* + /* * \_SB * ---- * Fix for the system root bus device -- the only root-level device. @@ -1320,7 +1314,7 @@ acpi_add_single_object(struct acpi_device **child, device->parent->ops.bind(device); } - end: +end: if (!result) *child = device; else { @@ -1464,7 +1458,6 @@ acpi_bus_add(struct acpi_device **child, return result; } - EXPORT_SYMBOL(acpi_bus_add); int acpi_bus_start(struct acpi_device *device) @@ -1484,7 +1477,6 @@ int acpi_bus_start(struct acpi_device *device) } return result; } - EXPORT_SYMBOL(acpi_bus_start); int acpi_bus_trim(struct acpi_device *start, int rmdevice) @@ -1542,7 +1534,6 @@ int acpi_bus_trim(struct acpi_device *start, int rmdevice) } EXPORT_SYMBOL_GPL(acpi_bus_trim); - static int acpi_bus_scan_fixed(struct acpi_device *root) { int result = 0; @@ -1610,6 +1601,6 @@ int __init acpi_scan_init(void) if (result) acpi_device_unregister(acpi_root, ACPI_BUS_REMOVAL_NORMAL); - Done: +Done: return result; } diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 1bdfb37..8851315 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -76,6 +76,7 @@ MODULE_LICENSE("GPL"); static int brightness_switch_enabled = 1; module_param(brightness_switch_enabled, bool, 0644); +static int register_count = 0; static int acpi_video_bus_add(struct acpi_device *device); static int acpi_video_bus_remove(struct acpi_device *device, int type); static int acpi_video_resume(struct acpi_device *device); @@ -586,6 +587,14 @@ static struct dmi_system_id video_dmi_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5315"), }, }, + { + .callback = video_set_bqc_offset, + .ident = "Acer Aspire 7720", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 7720"), + }, + }, {} }; @@ -976,6 +985,11 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device) device->backlight->props.max_brightness = device->brightness->count-3; kfree(name); + result = sysfs_create_link(&device->backlight->dev.kobj, + &device->dev->dev.kobj, "device"); + if (result) + printk(KERN_ERR PREFIX "Create sysfs link\n"); + device->cdev = thermal_cooling_device_register("LCD", device->dev, &video_cooling_ops); if (IS_ERR(device->cdev)) @@ -1054,15 +1068,15 @@ static void acpi_video_bus_find_cap(struct acpi_video_bus *video) static int acpi_video_bus_check(struct acpi_video_bus *video) { acpi_status status = -ENOENT; - struct device *dev; + struct pci_dev *dev; if (!video) return -EINVAL; - dev = acpi_get_physical_pci_device(video->device->handle); + dev = acpi_get_pci_dev(video->device->handle); if (!dev) return -ENODEV; - put_device(dev); + pci_dev_put(dev); /* Since there is no HID, CID and so on for VGA driver, we have * to check well known required nodes. @@ -1990,6 +2004,7 @@ static int acpi_video_bus_put_one_device(struct acpi_video_device *device) status = acpi_remove_notify_handler(device->dev->handle, ACPI_DEVICE_NOTIFY, acpi_video_device_notify); + sysfs_remove_link(&device->backlight->dev.kobj, "device"); backlight_device_unregister(device->backlight); if (device->cdev) { sysfs_remove_link(&device->dev->dev.kobj, @@ -2318,6 +2333,13 @@ static int __init intel_opregion_present(void) int acpi_video_register(void) { int result = 0; + if (register_count) { + /* + * if the function of acpi_video_register is already called, + * don't register the acpi_vide_bus again and return no error. + */ + return 0; + } acpi_video_dir = proc_mkdir(ACPI_VIDEO_CLASS, acpi_root_dir); if (!acpi_video_dir) @@ -2329,10 +2351,35 @@ int acpi_video_register(void) return -ENODEV; } + /* + * When the acpi_video_bus is loaded successfully, increase + * the counter reference. + */ + register_count = 1; + return 0; } EXPORT_SYMBOL(acpi_video_register); +void acpi_video_unregister(void) +{ + if (!register_count) { + /* + * If the acpi video bus is already unloaded, don't + * unload it again and return directly. + */ + return; + } + acpi_bus_unregister_driver(&acpi_video_bus); + + remove_proc_entry(ACPI_VIDEO_CLASS, acpi_root_dir); + + register_count = 0; + + return; +} +EXPORT_SYMBOL(acpi_video_unregister); + /* * This is kind of nasty. Hardware using Intel chipsets may require * the video opregion code to be run first in order to initialise @@ -2350,16 +2397,12 @@ static int __init acpi_video_init(void) return acpi_video_register(); } -void acpi_video_exit(void) +static void __exit acpi_video_exit(void) { - - acpi_bus_unregister_driver(&acpi_video_bus); - - remove_proc_entry(ACPI_VIDEO_CLASS, acpi_root_dir); + acpi_video_unregister(); return; } -EXPORT_SYMBOL(acpi_video_exit); module_init(acpi_video_init); module_exit(acpi_video_exit); diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c index 0973727..7cd2b63 100644 --- a/drivers/acpi/video_detect.c +++ b/drivers/acpi/video_detect.c @@ -10,7 +10,7 @@ * assinged * * After PCI devices are glued with ACPI devices - * acpi_get_physical_pci_device() can be called to identify ACPI graphics + * acpi_get_pci_dev() can be called to identify ACPI graphics * devices for which a real graphics card is plugged in * * Now acpi_video_get_capabilities() can be called to check which @@ -36,6 +36,7 @@ #include <linux/acpi.h> #include <linux/dmi.h> +#include <linux/pci.h> ACPI_MODULE_NAME("video"); #define _COMPONENT ACPI_VIDEO_COMPONENT @@ -109,7 +110,7 @@ static acpi_status find_video(acpi_handle handle, u32 lvl, void *context, void **rv) { long *cap = context; - struct device *dev; + struct pci_dev *dev; struct acpi_device *acpi_dev; const struct acpi_device_id video_ids[] = { @@ -120,10 +121,10 @@ find_video(acpi_handle handle, u32 lvl, void *context, void **rv) return AE_OK; if (!acpi_match_device_ids(acpi_dev, video_ids)) { - dev = acpi_get_physical_pci_device(handle); + dev = acpi_get_pci_dev(handle); if (!dev) return AE_OK; - put_device(dev); + pci_dev_put(dev); *cap |= acpi_is_video_device(acpi_dev); } return AE_OK; diff --git a/drivers/gpu/drm/i915/i915_opregion.c b/drivers/gpu/drm/i915/i915_opregion.c index dc425e7..e4b4e88 100644 --- a/drivers/gpu/drm/i915/i915_opregion.c +++ b/drivers/gpu/drm/i915/i915_opregion.c @@ -419,7 +419,7 @@ void intel_opregion_free(struct drm_device *dev, int suspend) return; if (!suspend) - acpi_video_exit(); + acpi_video_unregister(); opregion->acpi->drdy = 0; diff --git a/drivers/pci/hotplug/acpi_pcihp.c b/drivers/pci/hotplug/acpi_pcihp.c index fbc63d5..eb15958 100644 --- a/drivers/pci/hotplug/acpi_pcihp.c +++ b/drivers/pci/hotplug/acpi_pcihp.c @@ -354,7 +354,7 @@ acpi_status acpi_get_hp_params_from_firmware(struct pci_bus *bus, status = acpi_run_hpp(handle, hpp); if (ACPI_SUCCESS(status)) break; - if (acpi_root_bridge(handle)) + if (acpi_is_root_bridge(handle)) break; status = acpi_get_parent(handle, &phandle); if (ACPI_FAILURE(status)) @@ -428,7 +428,7 @@ int acpi_get_hp_hw_control_from_firmware(struct pci_dev *pdev, u32 flags) status = acpi_run_oshp(handle); if (ACPI_SUCCESS(status)) goto got_one; - if (acpi_root_bridge(handle)) + if (acpi_is_root_bridge(handle)) break; chandle = handle; status = acpi_get_parent(chandle, &handle); @@ -449,42 +449,6 @@ got_one: } EXPORT_SYMBOL(acpi_get_hp_hw_control_from_firmware); -/* acpi_root_bridge - check to see if this acpi object is a root bridge - * - * @handle - the acpi object in question. - */ -int acpi_root_bridge(acpi_handle handle) -{ - acpi_status status; - struct acpi_device_info *info; - struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; - int i; - - status = acpi_get_object_info(handle, &buffer); - if (ACPI_SUCCESS(status)) { - info = buffer.pointer; - if ((info->valid & ACPI_VALID_HID) && - !strcmp(PCI_ROOT_HID_STRING, - info->hardware_id.value)) { - kfree(buffer.pointer); - return 1; - } - if (info->valid & ACPI_VALID_CID) { - for (i=0; i < info->compatibility_id.count; i++) { - if (!strcmp(PCI_ROOT_HID_STRING, - info->compatibility_id.id[i].value)) { - kfree(buffer.pointer); - return 1; - } - } - } - kfree(buffer.pointer); - } - return 0; -} -EXPORT_SYMBOL_GPL(acpi_root_bridge); - - static int is_ejectable(acpi_handle handle) { acpi_status status; diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index 3a6064b..0cb0f83 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -678,18 +678,9 @@ static void remove_bridge(acpi_handle handle) static struct pci_dev * get_apic_pci_info(acpi_handle handle) { - struct acpi_pci_id id; - struct pci_bus *bus; struct pci_dev *dev; - if (ACPI_FAILURE(acpi_get_pci_id(handle, &id))) - return NULL; - - bus = pci_find_bus(id.segment, id.bus); - if (!bus) - return NULL; - - dev = pci_get_slot(bus, PCI_DEVFN(id.device, id.function)); + dev = acpi_get_pci_dev(handle); if (!dev) return NULL; @@ -1396,19 +1387,16 @@ static void acpiphp_sanitize_bus(struct pci_bus *bus) /* Program resources in newly inserted bridge */ static int acpiphp_configure_bridge (acpi_handle handle) { - struct acpi_pci_id pci_id; + struct pci_dev *dev; struct pci_bus *bus; - if (ACPI_FAILURE(acpi_get_pci_id(handle, &pci_id))) { + dev = acpi_get_pci_dev(handle); + if (!dev) { err("cannot get PCI domain and bus number for bridge\n"); return -EINVAL; } - bus = pci_find_bus(pci_id.segment, pci_id.bus); - if (!bus) { - err("cannot find bus %d:%d\n", - pci_id.segment, pci_id.bus); - return -EINVAL; - } + + bus = dev->bus; pci_bus_size_bridges(bus); pci_bus_assign_resources(bus); @@ -1416,6 +1404,7 @@ static int acpiphp_configure_bridge (acpi_handle handle) acpiphp_set_hpp_values(handle, bus); pci_enable_bridges(bus); acpiphp_configure_ioapics(handle); + pci_dev_put(dev); return 0; } @@ -1631,7 +1620,7 @@ find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv) { int *count = (int *)context; - if (acpi_root_bridge(handle)) { + if (acpi_is_root_bridge(handle)) { acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY, handle_hotplug_event_bridge, NULL); (*count)++; diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index c682ac5..5613483 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -34,6 +34,23 @@ config ACER_WMI If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M here. +config ACERHDF + tristate "Acer Aspire One temperature and fan driver" + depends on THERMAL && THERMAL_HWMON && ACPI + ---help--- + This is a driver for Acer Aspire One netbooks. It allows to access + the temperature sensor and to control the fan. + + After loading this driver the BIOS is still in control of the fan. + To let the kernel handle the fan, do: + echo -n enabled > /sys/class/thermal/thermal_zone0/mode + + For more information about this driver see + <http://piie.net/files/acerhdf_README.txt> + + If you have an Acer Aspire One netbook, say Y or M + here. + config ASUS_LAPTOP tristate "Asus Laptop Extras (EXPERIMENTAL)" depends on ACPI diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile index e40c7bd..641b8bf 100644 --- a/drivers/platform/x86/Makefile +++ b/drivers/platform/x86/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_COMPAL_LAPTOP) += compal-laptop.o obj-$(CONFIG_DELL_LAPTOP) += dell-laptop.o obj-$(CONFIG_DELL_WMI) += dell-wmi.o obj-$(CONFIG_ACER_WMI) += acer-wmi.o +obj-$(CONFIG_ACERHDF) += acerhdf.o obj-$(CONFIG_HP_WMI) += hp-wmi.o obj-$(CONFIG_TC1100_WMI) += tc1100-wmi.o obj-$(CONFIG_SONY_LAPTOP) += sony-laptop.o diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c new file mode 100644 index 0000000..bdfee17 --- /dev/null +++ b/drivers/platform/x86/acerhdf.c @@ -0,0 +1,602 @@ +/* + * acerhdf - A driver which monitors the temperature + * of the aspire one netbook, turns on/off the fan + * as soon as the upper/lower threshold is reached. + * + * (C) 2009 - Peter Feuerer peter (a) piie.net + * http://piie.net + * 2009 Borislav Petkov <petkovbb@gmail.com> + * + * Inspired by and many thanks to: + * o acerfand - Rachel Greenham + * o acer_ec.pl - Michael Kurz michi.kurz (at) googlemail.com + * - Petr Tomasek tomasek (#) etf,cuni,cz + * - Carlos Corbacho cathectic (at) gmail.com + * o lkml - Matthew Garrett + * - Borislav Petkov + * - Andreas Mohr + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#define pr_fmt(fmt) "acerhdf: " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/fs.h> +#include <linux/dmi.h> +#include <acpi/acpi_drivers.h> +#include <linux/sched.h> +#include <linux/thermal.h> +#include <linux/platform_device.h> + +/* + * The driver is started with "kernel mode off" by default. That means, the BIOS + * is still in control of the fan. In this mode the driver allows to read the + * temperature of the cpu and a userspace tool may take over control of the fan. + * If the driver is switched to "kernel mode" (e.g. via module parameter) the + * driver is in full control of the fan. If you want the module to be started in + * kernel mode by default, define the following: + */ +#undef START_IN_KERNEL_MODE + +#define DRV_VER "0.5.13" + +/* + * According to the Atom N270 datasheet, + * (http://download.intel.com/design/processor/datashts/320032.pdf) the + * CPU's optimal operating limits denoted in junction temperature as + * measured by the on-die thermal monitor are within 0 <= Tj <= 90. So, + * assume 89°C is critical temperature. + */ +#define ACERHDF_TEMP_CRIT 89 +#define ACERHDF_FAN_OFF 0 +#define ACERHDF_FAN_AUTO 1 + +/* + * No matter what value the user puts into the fanon variable, turn on the fan + * at 80 degree Celsius to prevent hardware damage + */ +#define ACERHDF_MAX_FANON 80 + +/* + * Maximum interval between two temperature checks is 15 seconds, as the die + * can get hot really fast under heavy load (plus we shouldn't forget about + * possible impact of _external_ aggressive sources such as heaters, sun etc.) + */ +#define ACERHDF_MAX_INTERVAL 15 + +#ifdef START_IN_KERNEL_MODE +static int kernelmode = 1; +#else +static int kernelmode; +#endif + +static unsigned int interval = 10; +static unsigned int fanon = 63; +static unsigned int fanoff = 58; +static unsigned int verbose; +static unsigned int fanstate = ACERHDF_FAN_AUTO; +static char force_bios[16]; +static unsigned int prev_interval; +struct thermal_zone_device *thz_dev; +struct thermal_cooling_device *cl_dev; +struct platform_device *acerhdf_dev; + +module_param(kernelmode, uint, 0); +MODULE_PARM_DESC(kernelmode, "Kernel mode fan control on / off"); +module_param(interval, uint, 0600); +MODULE_PARM_DESC(interval, "Polling interval of temperature check"); +module_param(fanon, uint, 0600); +MODULE_PARM_DESC(fanon, "Turn the fan on above this temperature"); +module_param(fanoff, uint, 0600); +MODULE_PARM_DESC(fanoff, "Turn the fan off below this temperature"); +module_param(verbose, uint, 0600); +MODULE_PARM_DESC(verbose, "Enable verbose dmesg output"); +module_param_string(force_bios, force_bios, 16, 0); +MODULE_PARM_DESC(force_bios, "Force BIOS version and omit BIOS check"); + +/* BIOS settings */ +struct bios_settings_t { + const char *vendor; + const char *version; + unsigned char fanreg; + unsigned char tempreg; + unsigned char fancmd[2]; /* fan off and auto commands */ +}; + +/* Register addresses and values for different BIOS versions */ +static const struct bios_settings_t bios_tbl[] = { + {"Acer", "v0.3109", 0x55, 0x58, {0x1f, 0x00} }, + {"Acer", "v0.3114", 0x55, 0x58, {0x1f, 0x00} }, + {"Acer", "v0.3301", 0x55, 0x58, {0xaf, 0x00} }, + {"Acer", "v0.3304", 0x55, 0x58, {0xaf, 0x00} }, + {"Acer", "v0.3305", 0x55, 0x58, {0xaf, 0x00} }, + {"Acer", "v0.3308", 0x55, 0x58, {0x21, 0x00} }, + {"Acer", "v0.3309", 0x55, 0x58, {0x21, 0x00} }, + {"Acer", "v0.3310", 0x55, 0x58, {0x21, 0x00} }, + {"Gateway", "v0.3103", 0x55, 0x58, {0x21, 0x00} }, + {"Packard Bell", "v0.3105", 0x55, 0x58, {0x21, 0x00} }, + {"", "", 0, 0, {0, 0} } +}; + +static const struct bios_settings_t *bios_cfg __read_mostly; + + +static int acerhdf_get_temp(int *temp) +{ + u8 read_temp; + + if (ec_read(bios_cfg->tempreg, &read_temp)) + return -EINVAL; + + *temp = read_temp; + + return 0; +} + +static int acerhdf_get_fanstate(int *state) +{ + u8 fan; + bool tmp; + + if (ec_read(bios_cfg->fanreg, &fan)) + return -EINVAL; + + tmp = (fan == bios_cfg->fancmd[ACERHDF_FAN_OFF]); + *state = tmp ? ACERHDF_FAN_OFF : ACERHDF_FAN_AUTO; + + return 0; +} + +static void acerhdf_change_fanstate(int state) +{ + unsigned char cmd; + + if (verbose) + pr_notice("fan %s\n", (state == ACERHDF_FAN_OFF) ? + "OFF" : "ON"); + + if ((state != ACERHDF_FAN_OFF) && (state != ACERHDF_FAN_AUTO)) { + pr_err("invalid fan state %d requested, setting to auto!\n", + state); + state = ACERHDF_FAN_AUTO; + } + + cmd = bios_cfg->fancmd[state]; + fanstate = state; + + ec_write(bios_cfg->fanreg, cmd); +} + +static void acerhdf_check_param(struct thermal_zone_device *thermal) +{ + if (fanon > ACERHDF_MAX_FANON) { + pr_err("fanon temperature too high, set to %d\n", + ACERHDF_MAX_FANON); + fanon = ACERHDF_MAX_FANON; + } + + if (kernelmode && prev_interval != interval) { + if (interval > ACERHDF_MAX_INTERVAL) { + pr_err("interval too high, set to %d\n", + ACERHDF_MAX_INTERVAL); + interval = ACERHDF_MAX_INTERVAL; + } + if (verbose) + pr_notice("interval changed to: %d\n", + interval); + thermal->polling_delay = interval*1000; + prev_interval = interval; + } +} + +/* + * This is the thermal zone callback which does the delayed polling of the fan + * state. We do check /sysfs-originating settings here in acerhdf_check_param() + * as late as the polling interval is since we can't do that in the respective + * accessors of the module parameters. + */ +static int acerhdf_get_ec_temp(struct thermal_zone_device *thermal, + unsigned long *t) +{ + int temp, err = 0; + + acerhdf_check_param(thermal); + + err = acerhdf_get_temp(&temp); + if (err) + return err; + + if (verbose) + pr_notice("temp %d\n", temp); + + *t = temp; + return 0; +} + +static int acerhdf_bind(struct thermal_zone_device *thermal, + struct thermal_cooling_device *cdev) +{ + /* if the cooling device is the one from acerhdf bind it */ + if (cdev != cl_dev) + return 0; + + if (thermal_zone_bind_cooling_device(thermal, 0, cdev)) { + pr_err("error binding cooling dev\n"); + return -EINVAL; + } + return 0; +} + +static int acerhdf_unbind(struct thermal_zone_device *thermal, + struct thermal_cooling_device *cdev) +{ + if (cdev != cl_dev) + return 0; + + if (thermal_zone_unbind_cooling_device(thermal, 0, cdev)) { + pr_err("error unbinding cooling dev\n"); + return -EINVAL; + } + return 0; +} + +static inline void acerhdf_revert_to_bios_mode(void) +{ + acerhdf_change_fanstate(ACERHDF_FAN_AUTO); + kernelmode = 0; + if (thz_dev) + thz_dev->polling_delay = 0; + pr_notice("kernel mode fan control OFF\n"); +} +static inline void acerhdf_enable_kernelmode(void) +{ + kernelmode = 1; + + thz_dev->polling_delay = interval*1000; + thermal_zone_device_update(thz_dev); + pr_notice("kernel mode fan control ON\n"); +} + +static int acerhdf_get_mode(struct thermal_zone_device *thermal, + enum thermal_device_mode *mode) +{ + if (verbose) + pr_notice("kernel mode fan control %d\n", kernelmode); + + *mode = (kernelmode) ? THERMAL_DEVICE_ENABLED + : THERMAL_DEVICE_DISABLED; + + return 0; +} + +/* + * set operation mode; + * enabled: the thermal layer of the kernel takes care about + * the temperature and the fan. + * disabled: the BIOS takes control of the fan. + */ +static int acerhdf_set_mode(struct thermal_zone_device *thermal, + enum thermal_device_mode mode) +{ + if (mode == THERMAL_DEVICE_DISABLED && kernelmode) + acerhdf_revert_to_bios_mode(); + else if (mode == THERMAL_DEVICE_ENABLED && !kernelmode) + acerhdf_enable_kernelmode(); + + return 0; +} + +static int acerhdf_get_trip_type(struct thermal_zone_device *thermal, int trip, + enum thermal_trip_type *type) +{ + if (trip == 0) + *type = THERMAL_TRIP_ACTIVE; + + return 0; +} + +static int acerhdf_get_trip_temp(struct thermal_zone_device *thermal, int trip, + unsigned long *temp) +{ + if (trip == 0) + *temp = fanon; + + return 0; +} + +static int acerhdf_get_crit_temp(struct thermal_zone_device *thermal, + unsigned long *temperature) +{ + *temperature = ACERHDF_TEMP_CRIT; + return 0; +} + +/* bind callback functions to thermalzone */ +struct thermal_zone_device_ops acerhdf_dev_ops = { + .bind = acerhdf_bind, + .unbind = acerhdf_unbind, + .get_temp = acerhdf_get_ec_temp, + .get_mode = acerhdf_get_mode, + .set_mode = acerhdf_set_mode, + .get_trip_type = acerhdf_get_trip_type, + .get_trip_temp = acerhdf_get_trip_temp, + .get_crit_temp = acerhdf_get_crit_temp, +}; + + +/* + * cooling device callback functions + * get maximal fan cooling state + */ +static int acerhdf_get_max_state(struct thermal_cooling_device *cdev, + unsigned long *state) +{ + *state = 1; + + return 0; +} + +static int acerhdf_get_cur_state(struct thermal_cooling_device *cdev, + unsigned long *state) +{ + int err = 0, tmp; + + err = acerhdf_get_fanstate(&tmp); + if (err) + return err; + + *state = (tmp == ACERHDF_FAN_AUTO) ? 1 : 0; + return 0; +} + +/* change current fan state - is overwritten when running in kernel mode */ +static int acerhdf_set_cur_state(struct thermal_cooling_device *cdev, + unsigned long state) +{ + int cur_temp, cur_state, err = 0; + + if (!kernelmode) + return 0; + + err = acerhdf_get_temp(&cur_temp); + if (err) { + pr_err("error reading temperature, hand off control to BIOS\n"); + goto err_out; + } + + err = acerhdf_get_fanstate(&cur_state); + if (err) { + pr_err("error reading fan state, hand off control to BIOS\n"); + goto err_out; + } + + if (state == 0) { + /* turn fan off only if below fanoff temperature */ + if ((cur_state == ACERHDF_FAN_AUTO) && + (cur_temp < fanoff)) + acerhdf_change_fanstate(ACERHDF_FAN_OFF); + } else { + if (cur_state == ACERHDF_FAN_OFF) + acerhdf_change_fanstate(ACERHDF_FAN_AUTO); + } + return 0; + +err_out: + acerhdf_revert_to_bios_mode(); + return -EINVAL; +} + +/* bind fan callbacks to fan device */ +struct thermal_cooling_device_ops acerhdf_cooling_ops = { + .get_max_state = acerhdf_get_max_state, + .get_cur_state = acerhdf_get_cur_state, + .set_cur_state = acerhdf_set_cur_state, +}; + +/* suspend / resume functionality */ +static int acerhdf_suspend(struct platform_device *dev, pm_message_t state) +{ + if (kernelmode) + acerhdf_change_fanstate(ACERHDF_FAN_AUTO); + + if (verbose) + pr_notice("going suspend\n"); + + return 0; +} + +static int acerhdf_resume(struct platform_device *device) +{ + if (verbose) + pr_notice("resuming\n"); + + return 0; +} + +static int __devinit acerhdf_probe(struct platform_device *device) +{ + return 0; +} + +static int acerhdf_remove(struct platform_device *device) +{ + return 0; +} + +struct platform_driver acerhdf_drv = { + .driver = { + .name = "acerhdf", + .owner = THIS_MODULE, + }, + .probe = acerhdf_probe, + .remove = acerhdf_remove, + .suspend = acerhdf_suspend, + .resume = acerhdf_resume, +}; + + +/* check hardware */ +static int acerhdf_check_hardware(void) +{ + char const *vendor, *version, *product; + int i; + + /* get BIOS data */ + vendor = dmi_get_system_info(DMI_SYS_VENDOR); + version = dmi_get_system_info(DMI_BIOS_VERSION); + product = dmi_get_system_info(DMI_PRODUCT_NAME); + + pr_info("Acer Aspire One Fan driver, v.%s\n", DRV_VER); + + if (!force_bios[0]) { + if (strncmp(product, "AO", 2)) { + pr_err("no Aspire One hardware found\n"); + return -EINVAL; + } + } else { + pr_info("forcing BIOS version: %s\n", version); + version = force_bios; + kernelmode = 0; + } + + if (verbose) + pr_info("BIOS info: %s %s, product: %s\n", + vendor, version, product); + + /* search BIOS version and vendor in BIOS settings table */ + for (i = 0; bios_tbl[i].version[0]; i++) { + if (!strcmp(bios_tbl[i].vendor, vendor) && + !strcmp(bios_tbl[i].version, version)) { + bios_cfg = &bios_tbl[i]; + break; + } + } + + if (!bios_cfg) { + pr_err("unknown (unsupported) BIOS version %s/%s, " + "please report, aborting!\n", vendor, version); + return -EINVAL; + } + + /* + * if started with kernel mode off, prevent the kernel from switching + * off the fan + */ + if (!kernelmode) { + pr_notice("Fan control off, to enable do:\n"); + pr_notice("echo -n \"enabled\" > " + "/sys/class/thermal/thermal_zone0/mode\n"); + } + + return 0; +} + +static int acerhdf_register_platform(void) +{ + int err = 0; + + err = platform_driver_register(&acerhdf_drv); + if (err) + return err; + + acerhdf_dev = platform_device_alloc("acerhdf", -1); + platform_device_add(acerhdf_dev); + + return 0; +} + +static void acerhdf_unregister_platform(void) +{ + if (!acerhdf_dev) + return; + + platform_device_del(acerhdf_dev); + platform_driver_unregister(&acerhdf_drv); +} + +static int acerhdf_register_thermal(void) +{ + cl_dev = thermal_cooling_device_register("acerhdf-fan", NULL, + &acerhdf_cooling_ops); + + if (IS_ERR(cl_dev)) + return -EINVAL; + + thz_dev = thermal_zone_device_register("acerhdf", 1, NULL, + &acerhdf_dev_ops, 0, 0, 0, + (kernelmode) ? interval*1000 : 0); + if (IS_ERR(thz_dev)) + return -EINVAL; + + return 0; +} + +static void acerhdf_unregister_thermal(void) +{ + if (cl_dev) { + thermal_cooling_device_unregister(cl_dev); + cl_dev = NULL; + } + + if (thz_dev) { + thermal_zone_device_unregister(thz_dev); + thz_dev = NULL; + } +} + +static int __init acerhdf_init(void) +{ + int err = 0; + + err = acerhdf_check_hardware(); + if (err) + goto out_err; + + err = acerhdf_register_platform(); + if (err) + goto err_unreg; + + err = acerhdf_register_thermal(); + if (err) + goto err_unreg; + + return 0; + +err_unreg: + acerhdf_unregister_thermal(); + acerhdf_unregister_platform(); + +out_err: + return -ENODEV; +} + +static void __exit acerhdf_exit(void) +{ + acerhdf_change_fanstate(ACERHDF_FAN_AUTO); + acerhdf_unregister_thermal(); + acerhdf_unregister_platform(); +} + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Peter Feuerer"); +MODULE_DESCRIPTION("Aspire One temperature and fan driver"); +MODULE_ALIAS("dmi:*:*Acer*:*:"); +MODULE_ALIAS("dmi:*:*Gateway*:*:"); +MODULE_ALIAS("dmi:*:*Packard Bell*:*:"); + +module_init(acerhdf_init); +module_exit(acerhdf_exit); diff --git a/drivers/platform/x86/dell-wmi.c b/drivers/platform/x86/dell-wmi.c index 2fab941..0f900cc 100644 --- a/drivers/platform/x86/dell-wmi.c +++ b/drivers/platform/x86/dell-wmi.c @@ -46,10 +46,53 @@ struct key_entry { u16 keycode; }; -enum { KE_KEY, KE_SW, KE_END }; +enum { KE_KEY, KE_SW, KE_IGNORE, KE_END }; + +/* + * Certain keys are flagged as KE_IGNORE. All of these are either + * notifications (rather than requests for change) or are also sent + * via the keyboard controller so should not be sent again. + */ static struct key_entry dell_wmi_keymap[] = { {KE_KEY, 0xe045, KEY_PROG1}, + {KE_KEY, 0xe009, KEY_EJECTCD}, + + /* These also contain the brightness level at offset 6 */ + {KE_KEY, 0xe006, KEY_BRIGHTNESSUP}, + {KE_KEY, 0xe005, KEY_BRIGHTNESSDOWN}, + + /* Battery health status button */ + {KE_KEY, 0xe007, KEY_BATTERY}, + + /* This is actually for all radios. Although physically a + * switch, the notification does not provide an indication of + * state and so it should be reported as a key */ + {KE_KEY, 0xe008, KEY_WLAN}, + + /* The next device is at offset 6, the active devices are at + offset 8 and the attached devices at offset 10 */ + {KE_KEY, 0xe00b, KEY_DISPLAYTOGGLE}, + + {KE_IGNORE, 0xe00c, KEY_KBDILLUMTOGGLE}, + + /* BIOS error detected */ + {KE_IGNORE, 0xe00d, KEY_RESERVED}, + + /* Wifi Catcher */ + {KE_KEY, 0xe011, KEY_PROG2}, + + /* Ambient light sensor toggle */ + {KE_IGNORE, 0xe013, KEY_RESERVED}, + + {KE_IGNORE, 0xe020, KEY_MUTE}, + {KE_IGNORE, 0xe02e, KEY_VOLUMEDOWN}, + {KE_IGNORE, 0xe030, KEY_VOLUMEUP}, + {KE_IGNORE, 0xe033, KEY_KBDILLUMUP}, + {KE_IGNORE, 0xe034, KEY_KBDILLUMDOWN}, + {KE_IGNORE, 0xe03a, KEY_CAPSLOCK}, + {KE_IGNORE, 0xe045, KEY_NUMLOCK}, + {KE_IGNORE, 0xe046, KEY_SCROLLLOCK}, {KE_END, 0} }; @@ -122,15 +165,20 @@ static void dell_wmi_notify(u32 value, void *context) if (obj && obj->type == ACPI_TYPE_BUFFER) { int *buffer = (int *)obj->buffer.pointer; - key = dell_wmi_get_entry_by_scancode(buffer[1]); + /* + * The upper bytes of the event may contain + * additional information, so mask them off for the + * scancode lookup + */ + key = dell_wmi_get_entry_by_scancode(buffer[1] & 0xFFFF); if (key) { input_report_key(dell_wmi_input_dev, key->keycode, 1); input_sync(dell_wmi_input_dev); input_report_key(dell_wmi_input_dev, key->keycode, 0); input_sync(dell_wmi_input_dev); - } else + } else if (buffer[1] & 0xFFFF) printk(KERN_INFO "dell-wmi: Unknown key %x pressed\n", - buffer[1]); + buffer[1] & 0xFFFF); } } diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c index 16fffe44..4ac2311 100644 --- a/drivers/platform/x86/hp-wmi.c +++ b/drivers/platform/x86/hp-wmi.c @@ -47,7 +47,7 @@ MODULE_ALIAS("wmi:5FB7F034-2C63-45e9-BE91-3D44E2C707E4"); #define HPWMI_DISPLAY_QUERY 0x1 #define HPWMI_HDDTEMP_QUERY 0x2 #define HPWMI_ALS_QUERY 0x3 -#define HPWMI_DOCK_QUERY 0x4 +#define HPWMI_HARDWARE_QUERY 0x4 #define HPWMI_WIRELESS_QUERY 0x5 #define HPWMI_HOTKEY_QUERY 0xc @@ -75,10 +75,9 @@ struct key_entry { u16 keycode; }; -enum { KE_KEY, KE_SW, KE_END }; +enum { KE_KEY, KE_END }; static struct key_entry hp_wmi_keymap[] = { - {KE_SW, 0x01, SW_DOCK}, {KE_KEY, 0x02, KEY_BRIGHTNESSUP}, {KE_KEY, 0x03, KEY_BRIGHTNESSDOWN}, {KE_KEY, 0x20e6, KEY_PROG1}, @@ -151,7 +150,22 @@ static int hp_wmi_als_state(void) static int hp_wmi_dock_state(void) { - return hp_wmi_perform_query(HPWMI_DOCK_QUERY, 0, 0); + int ret = hp_wmi_perform_query(HPWMI_HARDWARE_QUERY, 0, 0); + + if (ret < 0) + return ret; + + return ret & 0x1; +} + +static int hp_wmi_tablet_state(void) +{ + int ret = hp_wmi_perform_query(HPWMI_HARDWARE_QUERY, 0, 0); + + if (ret < 0) + return ret; + + return (ret & 0x4) ? 1 : 0; } static int hp_wmi_set_block(void *data, bool blocked) @@ -232,6 +246,15 @@ static ssize_t show_dock(struct device *dev, struct device_attribute *attr, return sprintf(buf, "%d\n", value); } +static ssize_t show_tablet(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int value = hp_wmi_tablet_state(); + if (value < 0) + return -EINVAL; + return sprintf(buf, "%d\n", value); +} + static ssize_t set_als(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { @@ -244,6 +267,7 @@ static DEVICE_ATTR(display, S_IRUGO, show_display, NULL); static DEVICE_ATTR(hddtemp, S_IRUGO, show_hddtemp, NULL); static DEVICE_ATTR(als, S_IRUGO | S_IWUSR, show_als, set_als); static DEVICE_ATTR(dock, S_IRUGO, show_dock, NULL); +static DEVICE_ATTR(tablet, S_IRUGO, show_tablet, NULL); static struct key_entry *hp_wmi_get_entry_by_scancode(int code) { @@ -326,13 +350,13 @@ static void hp_wmi_notify(u32 value, void *context) key->keycode, 0); input_sync(hp_wmi_input_dev); break; - case KE_SW: - input_report_switch(hp_wmi_input_dev, - key->keycode, - hp_wmi_dock_state()); - input_sync(hp_wmi_input_dev); - break; } + } else if (eventcode == 0x1) { + input_report_switch(hp_wmi_input_dev, SW_DOCK, + hp_wmi_dock_state()); + input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE, + hp_wmi_tablet_state()); + input_sync(hp_wmi_input_dev); } else if (eventcode == 0x5) { if (wifi_rfkill) rfkill_set_sw_state(wifi_rfkill, @@ -369,18 +393,19 @@ static int __init hp_wmi_input_setup(void) set_bit(EV_KEY, hp_wmi_input_dev->evbit); set_bit(key->keycode, hp_wmi_input_dev->keybit); break; - case KE_SW: - set_bit(EV_SW, hp_wmi_input_dev->evbit); - set_bit(key->keycode, hp_wmi_input_dev->swbit); - - /* Set initial dock state */ - input_report_switch(hp_wmi_input_dev, key->keycode, - hp_wmi_dock_state()); - input_sync(hp_wmi_input_dev); - break; } } + set_bit(EV_SW, hp_wmi_input_dev->evbit); + set_bit(SW_DOCK, hp_wmi_input_dev->swbit); + set_bit(SW_TABLET_MODE, hp_wmi_input_dev->swbit); + + /* Set initial hardware state */ + input_report_switch(hp_wmi_input_dev, SW_DOCK, hp_wmi_dock_state()); + input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE, + hp_wmi_tablet_state()); + input_sync(hp_wmi_input_dev); + err = input_register_device(hp_wmi_input_dev); if (err) { @@ -397,6 +422,7 @@ static void cleanup_sysfs(struct platform_device *device) device_remove_file(&device->dev, &dev_attr_hddtemp); device_remove_file(&device->dev, &dev_attr_als); device_remove_file(&device->dev, &dev_attr_dock); + device_remove_file(&device->dev, &dev_attr_tablet); } static int __init hp_wmi_bios_setup(struct platform_device *device) @@ -416,6 +442,9 @@ static int __init hp_wmi_bios_setup(struct platform_device *device) err = device_create_file(&device->dev, &dev_attr_dock); if (err) goto add_sysfs_error; + err = device_create_file(&device->dev, &dev_attr_tablet); + if (err) + goto add_sysfs_error; if (wireless & 0x1) { wifi_rfkill = rfkill_alloc("hp-wifi", &device->dev, @@ -485,23 +514,17 @@ static int __exit hp_wmi_bios_remove(struct platform_device *device) static int hp_wmi_resume_handler(struct platform_device *device) { - struct key_entry *key; - /* - * Docking state may have changed while suspended, so trigger - * an input event for the current state. As this is a switch, + * Hardware state may have changed while suspended, so trigger + * input events for the current state. As this is a switch, * the input layer will only actually pass it on if the state * changed. */ - for (key = hp_wmi_keymap; key->type != KE_END; key++) { - switch (key->type) { - case KE_SW: - input_report_switch(hp_wmi_input_dev, key->keycode, - hp_wmi_dock_state()); - input_sync(hp_wmi_input_dev); - break; - } - } + + input_report_switch(hp_wmi_input_dev, SW_DOCK, hp_wmi_dock_state()); + input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE, + hp_wmi_tablet_state()); + input_sync(hp_wmi_input_dev); return 0; } diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 40d64c0..a463fd7 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -22,7 +22,7 @@ */ #define TPACPI_VERSION "0.23" -#define TPACPI_SYSFS_VERSION 0x020300 +#define TPACPI_SYSFS_VERSION 0x020400 /* * Changelog: @@ -257,6 +257,8 @@ static struct { u32 wan:1; u32 uwb:1; u32 fan_ctrl_status_undef:1; + u32 second_fan:1; + u32 beep_needs_two_args:1; u32 input_device_registered:1; u32 platform_drv_registered:1; u32 platform_drv_attrs_registered:1; @@ -277,8 +279,10 @@ struct thinkpad_id_data { char *bios_version_str; /* Something like 1ZET51WW (1.03z) */ char *ec_version_str; /* Something like 1ZHT51WW-1.04a */ - u16 bios_model; /* Big Endian, TP-1Y = 0x5931, 0 = unknown */ + u16 bios_model; /* 1Y = 0x5931, 0 = unknown */ u16 ec_model; + u16 bios_release; /* 1ZETK1WW = 0x314b, 0 = unknown */ + u16 ec_release; char *model_str; /* ThinkPad T43 */ char *nummodel_str; /* 9384A9C for a 9384-A9C model */ @@ -355,6 +359,73 @@ static void tpacpi_log_usertask(const char * const what) } \ } while (0) +/* + * Quirk handling helpers + * + * ThinkPad IDs and versions seen in the field so far + * are two-characters from the set [0-9A-Z], i.e. base 36. + * + * We use values well outside that range as specials. + */ + +#define TPACPI_MATCH_ANY 0xffffU +#define TPACPI_MATCH_UNKNOWN 0U + +/* TPID('1', 'Y') == 0x5931 */ +#define TPID(__c1, __c2) (((__c2) << 8) | (__c1)) + +#define TPACPI_Q_IBM(__id1, __id2, __quirk) \ + { .vendor = PCI_VENDOR_ID_IBM, \ + .bios = TPID(__id1, __id2), \ + .ec = TPACPI_MATCH_ANY, \ + .quirks = (__quirk) } + +#define TPACPI_Q_LNV(__id1, __id2, __quirk) \ + { .vendor = PCI_VENDOR_ID_LENOVO, \ + .bios = TPID(__id1, __id2), \ + .ec = TPACPI_MATCH_ANY, \ + .quirks = (__quirk) } + +struct tpacpi_quirk { + unsigned int vendor; + u16 bios; + u16 ec; + unsigned long quirks; +}; + +/** + * tpacpi_check_quirks() - search BIOS/EC version on a list + * @qlist: array of &struct tpacpi_quirk + * @qlist_size: number of elements in @qlist + * + * Iterates over a quirks list until one is found that matches the + * ThinkPad's vendor, BIOS and EC model. + * + * Returns 0 if nothing matches, otherwise returns the quirks field of + * the matching &struct tpacpi_quirk entry. + * + * The match criteria is: vendor, ec and bios much match. + */ +static unsigned long __init tpacpi_check_quirks( + const struct tpacpi_quirk *qlist, + unsigned int qlist_size) +{ + while (qlist_size) { + if ((qlist->vendor == thinkpad_id.vendor || + qlist->vendor == TPACPI_MATCH_ANY) && + (qlist->bios == thinkpad_id.bios_model || + qlist->bios == TPACPI_MATCH_ANY) && + (qlist->ec == thinkpad_id.ec_model || + qlist->ec == TPACPI_MATCH_ANY)) + return qlist->quirks; + + qlist_size--; + qlist++; + } + return 0; +} + + /**************************************************************************** **************************************************************************** * @@ -2880,7 +2951,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) /* update bright_acpimode... */ tpacpi_check_std_acpi_brightness_support(); - if (tp_features.bright_acpimode) { + if (tp_features.bright_acpimode && acpi_video_backlight_support()) { printk(TPACPI_INFO "This ThinkPad has standard ACPI backlight " "brightness control, supported by the ACPI " @@ -4773,7 +4844,7 @@ TPACPI_HANDLE(led, ec, "SLED", /* 570 */ "LED", /* all others */ ); /* R30, R31 */ -#define TPACPI_LED_NUMLEDS 8 +#define TPACPI_LED_NUMLEDS 16 static struct tpacpi_led_classdev *tpacpi_leds; static enum led_status_t tpacpi_led_state_cache[TPACPI_LED_NUMLEDS]; static const char * const tpacpi_led_names[TPACPI_LED_NUMLEDS] = { @@ -4786,15 +4857,20 @@ static const char * const tpacpi_led_names[TPACPI_LED_NUMLEDS] = { "tpacpi::dock_batt", "tpacpi::unknown_led", "tpacpi::standby", + "tpacpi::dock_status1", + "tpacpi::dock_status2", + "tpacpi::unknown_led2", + "tpacpi::unknown_led3", + "tpacpi::thinkvantage", }; -#define TPACPI_SAFE_LEDS 0x0081U +#define TPACPI_SAFE_LEDS 0x1081U static inline bool tpacpi_is_led_restricted(const unsigned int led) { #ifdef CONFIG_THINKPAD_ACPI_UNSAFE_LEDS return false; #else - return (TPACPI_SAFE_LEDS & (1 << led)) == 0; + return (1U & (TPACPI_SAFE_LEDS >> led)) == 0; #endif } @@ -4956,6 +5032,10 @@ static int __init tpacpi_init_led(unsigned int led) tpacpi_leds[led].led = led; + /* LEDs with no name don't get registered */ + if (!tpacpi_led_names[led]) + return 0; + tpacpi_leds[led].led_classdev.brightness_set = &led_sysfs_set; tpacpi_leds[led].led_classdev.blink_set = &led_sysfs_blink_set; if (led_supported == TPACPI_LED_570) @@ -4974,10 +5054,59 @@ static int __init tpacpi_init_led(unsigned int led) return rc; } +static const struct tpacpi_quirk led_useful_qtable[] __initconst = { + TPACPI_Q_IBM('1', 'E', 0x009f), /* A30 */ + TPACPI_Q_IBM('1', 'N', 0x009f), /* A31 */ + TPACPI_Q_IBM('1', 'G', 0x009f), /* A31 */ + + TPACPI_Q_IBM('1', 'I', 0x0097), /* T30 */ + TPACPI_Q_IBM('1', 'R', 0x0097), /* T40, T41, T42, R50, R51 */ + TPACPI_Q_IBM('7', '0', 0x0097), /* T43, R52 */ + TPACPI_Q_IBM('1', 'Y', 0x0097), /* T43 */ + TPACPI_Q_IBM('1', 'W', 0x0097), /* R50e */ + TPACPI_Q_IBM('1', 'V', 0x0097), /* R51 */ + TPACPI_Q_IBM('7', '8', 0x0097), /* R51e */ + TPACPI_Q_IBM('7', '6', 0x0097), /* R52 */ + + TPACPI_Q_IBM('1', 'K', 0x00bf), /* X30 */ + TPACPI_Q_IBM('1', 'Q', 0x00bf), /* X31, X32 */ + TPACPI_Q_IBM('1', 'U', 0x00bf), /* X40 */ + TPACPI_Q_IBM('7', '4', 0x00bf), /* X41 */ + TPACPI_Q_IBM('7', '5', 0x00bf), /* X41t */ + + TPACPI_Q_IBM('7', '9', 0x1f97), /* T60 (1) */ + TPACPI_Q_IBM('7', '7', 0x1f97), /* Z60* (1) */ + TPACPI_Q_IBM('7', 'F', 0x1f97), /* Z61* (1) */ + TPACPI_Q_IBM('7', 'B', 0x1fb7), /* X60 (1) */ + + /* (1) - may have excess leds enabled on MSB */ + + /* Defaults (order matters, keep last, don't reorder!) */ + { /* Lenovo */ + .vendor = PCI_VENDOR_ID_LENOVO, + .bios = TPACPI_MATCH_ANY, .ec = TPACPI_MATCH_ANY, + .quirks = 0x1fffU, + }, + { /* IBM ThinkPads with no EC version string */ + .vendor = PCI_VENDOR_ID_IBM, + .bios = TPACPI_MATCH_ANY, .ec = TPACPI_MATCH_UNKNOWN, + .quirks = 0x00ffU, + }, + { /* IBM ThinkPads with EC version string */ + .vendor = PCI_VENDOR_ID_IBM, + .bios = TPACPI_MATCH_ANY, .ec = TPACPI_MATCH_ANY, + .quirks = 0x00bfU, + }, +}; + +#undef TPACPI_LEDQ_IBM +#undef TPACPI_LEDQ_LNV + static int __init led_init(struct ibm_init_struct *iibm) { unsigned int i; int rc; + unsigned long useful_leds; vdbg_printk(TPACPI_DBG_INIT, "initializing LED subdriver\n"); @@ -4999,6 +5128,9 @@ static int __init led_init(struct ibm_init_struct *iibm) vdbg_printk(TPACPI_DBG_INIT, "LED commands are %s, mode %d\n", str_supported(led_supported), led_supported); + if (led_supported == TPACPI_LED_NONE) + return 1; + tpacpi_leds = kzalloc(sizeof(*tpacpi_leds) * TPACPI_LED_NUMLEDS, GFP_KERNEL); if (!tpacpi_leds) { @@ -5006,8 +5138,12 @@ static int __init led_init(struct ibm_init_struct *iibm) return -ENOMEM; } + useful_leds = tpacpi_check_quirks(led_useful_qtable, + ARRAY_SIZE(led_useful_qtable)); + for (i = 0; i < TPACPI_LED_NUMLEDS; i++) { - if (!tpacpi_is_led_restricted(i)) { + if (!tpacpi_is_led_restricted(i) && + test_bit(i, &useful_leds)) { rc = tpacpi_init_led(i); if (rc < 0) { led_exit(); @@ -5017,12 +5153,11 @@ static int __init led_init(struct ibm_init_struct *iibm) } #ifdef CONFIG_THINKPAD_ACPI_UNSAFE_LEDS - if (led_supported != TPACPI_LED_NONE) - printk(TPACPI_NOTICE - "warning: userspace override of important " - "firmware LEDs is enabled\n"); + printk(TPACPI_NOTICE + "warning: userspace override of important " + "firmware LEDs is enabled\n"); #endif - return (led_supported != TPACPI_LED_NONE)? 0 : 1; + return 0; } #define str_led_status(s) \ @@ -5052,7 +5187,7 @@ static int led_read(char *p) } len += sprintf(p + len, "commands:\t" - "<led> on, <led> off, <led> blink (<led> is 0-7)\n"); + "<led> on, <led> off, <led> blink (<led> is 0-15)\n"); return len; } @@ -5067,7 +5202,7 @@ static int led_write(char *buf) return -ENODEV; while ((cmd = next_cmd(&buf))) { - if (sscanf(cmd, "%d", &led) != 1 || led < 0 || led > 7) + if (sscanf(cmd, "%d", &led) != 1 || led < 0 || led > 15) return -EINVAL; if (strstr(cmd, "off")) { @@ -5101,8 +5236,17 @@ static struct ibm_struct led_driver_data = { TPACPI_HANDLE(beep, ec, "BEEP"); /* all except R30, R31 */ +#define TPACPI_BEEP_Q1 0x0001 + +static const struct tpacpi_quirk beep_quirk_table[] __initconst = { + TPACPI_Q_IBM('I', 'M', TPACPI_BEEP_Q1), /* 570 */ + TPACPI_Q_IBM('I', 'U', TPACPI_BEEP_Q1), /* 570E - unverified */ +}; + static int __init beep_init(struct ibm_init_struct *iibm) { + unsigned long quirks; + vdbg_printk(TPACPI_DBG_INIT, "initializing beep subdriver\n"); TPACPI_ACPIHANDLE_INIT(beep); @@ -5110,6 +5254,11 @@ static int __init beep_init(struct ibm_init_struct *iibm) vdbg_printk(TPACPI_DBG_INIT, "beep is %s\n", str_supported(beep_handle != NULL)); + quirks = tpacpi_check_quirks(beep_quirk_table, + ARRAY_SIZE(beep_quirk_table)); + + tp_features.beep_needs_two_args = !!(quirks & TPACPI_BEEP_Q1); + return (beep_handle)? 0 : 1; } @@ -5141,8 +5290,15 @@ static int beep_write(char *buf) /* beep_cmd set */ } else return -EINVAL; - if (!acpi_evalf(beep_handle, NULL, NULL, "vdd", beep_cmd, 0)) - return -EIO; + if (tp_features.beep_needs_two_args) { + if (!acpi_evalf(beep_handle, NULL, NULL, "vdd", + beep_cmd, 0)) + return -EIO; + } else { + if (!acpi_evalf(beep_handle, NULL, NULL, "vd", + beep_cmd)) + return -EIO; + } } return 0; @@ -5569,6 +5725,10 @@ static struct ibm_struct ecdump_driver_data = { * Bit 3-0: backlight brightness level * * brightness_get_raw returns status data in the HBRV layout + * + * WARNING: The X61 has been verified to use HBRV for something else, so + * this should be used _only_ on IBM ThinkPads, and maybe with some careful + * testing on the very early *60 Lenovo models... */ enum { @@ -5869,6 +6029,12 @@ static int __init brightness_init(struct ibm_init_struct *iibm) brightness_mode); } + /* Safety */ + if (thinkpad_id.vendor != PCI_VENDOR_ID_IBM && + (brightness_mode == TPACPI_BRGHT_MODE_ECNVRAM || + brightness_mode == TPACPI_BRGHT_MODE_EC)) + return -EINVAL; + if (tpacpi_brightness_get_raw(&b) < 0) return 1; @@ -6161,6 +6327,21 @@ static struct ibm_struct volume_driver_data = { * For firmware bugs, refer to: * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues * + * ---- + * + * ThinkPad EC register 0x31 bit 0 (only on select models) + * + * When bit 0 of EC register 0x31 is zero, the tachometer registers + * show the speed of the main fan. When bit 0 of EC register 0x31 + * is one, the tachometer registers show the speed of the auxiliary + * fan. + * + * Fan control seems to affect both fans, regardless of the state + * of this bit. + * + * So far, only the firmware for the X60/X61 non-tablet versions + * seem to support this (firmware TP-7M). + * * TPACPI_FAN_WR_ACPI_FANS: * ThinkPad X31, X40, X41. Not available in the X60. * @@ -6187,6 +6368,8 @@ enum { /* Fan control constants */ fan_status_offset = 0x2f, /* EC register 0x2f */ fan_rpm_offset = 0x84, /* EC register 0x84: LSB, 0x85 MSB (RPM) * 0x84 must be read before 0x85 */ + fan_select_offset = 0x31, /* EC register 0x31 (Firmware 7M) + bit 0 selects which fan is active */ TP_EC_FAN_FULLSPEED = 0x40, /* EC fan mode: full speed */ TP_EC_FAN_AUTO = 0x80, /* EC fan mode: auto fan control */ @@ -6249,30 +6432,18 @@ TPACPI_HANDLE(sfan, ec, "SFAN", /* 570 */ * We assume 0x07 really means auto mode while this quirk is active, * as this is far more likely than the ThinkPad being in level 7, * which is only used by the firmware during thermal emergencies. + * + * Enable for TP-1Y (T43), TP-78 (R51e), TP-76 (R52), + * TP-70 (T43, R52), which are known to be buggy. */ -static void fan_quirk1_detect(void) +static void fan_quirk1_setup(void) { - /* In some ThinkPads, neither the EC nor the ACPI - * DSDT initialize the HFSP register, and it ends up - * being initially set to 0x07 when it *could* be - * either 0x07 or 0x80. - * - * Enable for TP-1Y (T43), TP-78 (R51e), - * TP-76 (R52), TP-70 (T43, R52), which are known - * to be buggy. */ if (fan_control_initial_status == 0x07) { - switch (thinkpad_id.ec_model) { - case 0x5931: /* TP-1Y */ - case 0x3837: /* TP-78 */ - case 0x3637: /* TP-76 */ - case 0x3037: /* TP-70 */ - printk(TPACPI_NOTICE - "fan_init: initial fan status is unknown, " - "assuming it is in auto mode\n"); - tp_features.fan_ctrl_status_undef = 1; - ;; - } + printk(TPACPI_NOTICE + "fan_init: initial fan status is unknown, " + "assuming it is in auto mode\n"); + tp_features.fan_ctrl_status_undef = 1; } } @@ -6292,6 +6463,38 @@ static void fan_quirk1_handle(u8 *fan_status) } } +/* Select main fan on X60/X61, NOOP on others */ +static bool fan_select_fan1(void) +{ + if (tp_features.second_fan) { + u8 val; + + if (ec_read(fan_select_offset, &val) < 0) + return false; + val &= 0xFEU; + if (ec_write(fan_select_offset, val) < 0) + return false; + } + return true; +} + +/* Select secondary fan on X60/X61 */ +static bool fan_select_fan2(void) +{ + u8 val; + + if (!tp_features.second_fan) + return false; + + if (ec_read(fan_select_offset, &val) < 0) + return false; + val |= 0x01U; + if (ec_write(fan_select_offset, val) < 0) + return false; + + return true; +} + /* * Call with fan_mutex held */ @@ -6369,6 +6572,8 @@ static int fan_get_speed(unsigned int *speed) switch (fan_status_access_mode) { case TPACPI_FAN_RD_TPEC: /* all except 570, 600e/x, 770e, 770x */ + if (unlikely(!fan_select_fan1())) + return -EIO; if (unlikely(!acpi_ec_read(fan_rpm_offset, &lo) || !acpi_ec_read(fan_rpm_offset + 1, &hi))) return -EIO; @@ -6385,6 +6590,34 @@ static int fan_get_speed(unsigned int *speed) return 0; } +static int fan2_get_speed(unsigned int *speed) +{ + u8 hi, lo; + bool rc; + + switch (fan_status_access_mode) { + case TPACPI_FAN_RD_TPEC: + /* all except 570, 600e/x, 770e, 770x */ + if (unlikely(!fan_select_fan2())) + return -EIO; + rc = !acpi_ec_read(fan_rpm_offset, &lo) || + !acpi_ec_read(fan_rpm_offset + 1, &hi); + fan_select_fan1(); /* play it safe */ + if (rc) + return -EIO; + + if (likely(speed)) + *speed = (hi << 8) | lo; + + break; + + default: + return -ENXIO; + } + + return 0; +} + static int fan_set_level(int level) { if (!fan_control_allowed) @@ -6790,6 +7023,25 @@ static struct device_attribute dev_attr_fan_fan1_input = __ATTR(fan1_input, S_IRUGO, fan_fan1_input_show, NULL); +/* sysfs fan fan2_input ------------------------------------------------ */ +static ssize_t fan_fan2_input_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int res; + unsigned int speed; + + res = fan2_get_speed(&speed); + if (res < 0) + return res; + + return snprintf(buf, PAGE_SIZE, "%u\n", speed); +} + +static struct device_attribute dev_attr_fan_fan2_input = + __ATTR(fan2_input, S_IRUGO, + fan_fan2_input_show, NULL); + /* sysfs fan fan_watchdog (hwmon driver) ------------------------------- */ static ssize_t fan_fan_watchdog_show(struct device_driver *drv, char *buf) @@ -6823,6 +7075,7 @@ static DRIVER_ATTR(fan_watchdog, S_IWUSR | S_IRUGO, static struct attribute *fan_attributes[] = { &dev_attr_fan_pwm1_enable.attr, &dev_attr_fan_pwm1.attr, &dev_attr_fan_fan1_input.attr, + NULL, /* for fan2_input */ NULL }; @@ -6830,9 +7083,36 @@ static const struct attribute_group fan_attr_group = { .attrs = fan_attributes, }; +#define TPACPI_FAN_Q1 0x0001 /* Unitialized HFSP */ +#define TPACPI_FAN_2FAN 0x0002 /* EC 0x31 bit 0 selects fan2 */ + +#define TPACPI_FAN_QI(__id1, __id2, __quirks) \ + { .vendor = PCI_VENDOR_ID_IBM, \ + .bios = TPACPI_MATCH_ANY, \ + .ec = TPID(__id1, __id2), \ + .quirks = __quirks } + +#define TPACPI_FAN_QL(__id1, __id2, __quirks) \ + { .vendor = PCI_VENDOR_ID_LENOVO, \ + .bios = TPACPI_MATCH_ANY, \ + .ec = TPID(__id1, __id2), \ + .quirks = __quirks } + +static const struct tpacpi_quirk fan_quirk_table[] __initconst = { + TPACPI_FAN_QI('1', 'Y', TPACPI_FAN_Q1), + TPACPI_FAN_QI('7', '8', TPACPI_FAN_Q1), + TPACPI_FAN_QI('7', '6', TPACPI_FAN_Q1), + TPACPI_FAN_QI('7', '0', TPACPI_FAN_Q1), + TPACPI_FAN_QL('7', 'M', TPACPI_FAN_2FAN), +}; + +#undef TPACPI_FAN_QL +#undef TPACPI_FAN_QI + static int __init fan_init(struct ibm_init_struct *iibm) { int rc; + unsigned long quirks; vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_FAN, "initializing fan subdriver\n"); @@ -6843,12 +7123,16 @@ static int __init fan_init(struct ibm_init_struct *iibm) fan_control_commands = 0; fan_watchdog_maxinterval = 0; tp_features.fan_ctrl_status_undef = 0; + tp_features.second_fan = 0; fan_control_desired_level = 7; TPACPI_ACPIHANDLE_INIT(fans); TPACPI_ACPIHANDLE_INIT(gfan); TPACPI_ACPIHANDLE_INIT(sfan); + quirks = tpacpi_check_quirks(fan_quirk_table, + ARRAY_SIZE(fan_quirk_table)); + if (gfan_handle) { /* 570, 600e/x, 770e, 770x */ fan_status_access_mode = TPACPI_FAN_RD_ACPI_GFAN; @@ -6858,7 +7142,13 @@ static int __init fan_init(struct ibm_init_struct *iibm) if (likely(acpi_ec_read(fan_status_offset, &fan_control_initial_status))) { fan_status_access_mode = TPACPI_FAN_RD_TPEC; - fan_quirk1_detect(); + if (quirks & TPACPI_FAN_Q1) + fan_quirk1_setup(); + if (quirks & TPACPI_FAN_2FAN) { + tp_features.second_fan = 1; + dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_FAN, + "secondary fan support enabled\n"); + } } else { printk(TPACPI_ERR "ThinkPad ACPI EC access misbehaving, " @@ -6914,6 +7204,11 @@ static int __init fan_init(struct ibm_init_struct *iibm) if (fan_status_access_mode != TPACPI_FAN_NONE || fan_control_access_mode != TPACPI_FAN_WR_NONE) { + if (tp_features.second_fan) { + /* attach second fan tachometer */ + fan_attributes[ARRAY_SIZE(fan_attributes)-2] = + &dev_attr_fan_fan2_input.attr; + } rc = sysfs_create_group(&tpacpi_sensors_pdev->dev.kobj, &fan_attr_group); if (rc < 0) @@ -7385,6 +7680,24 @@ err_out: /* Probing */ +static bool __pure __init tpacpi_is_fw_digit(const char c) +{ + return (c >= '0' && c <= '9') || (c >= 'A' && c <= 'Z'); +} + +/* Most models: xxyTkkWW (#.##c); Ancient 570/600 and -SL lacks (#.##c) */ +static bool __pure __init tpacpi_is_valid_fw_id(const char* const s, + const char t) +{ + return s && strlen(s) >= 8 && + tpacpi_is_fw_digit(s[0]) && + tpacpi_is_fw_digit(s[1]) && + s[2] == t && s[3] == 'T' && + tpacpi_is_fw_digit(s[4]) && + tpacpi_is_fw_digit(s[5]) && + s[6] == 'W' && s[7] == 'W'; +} + /* returns 0 - probe ok, or < 0 - probe error. * Probe ok doesn't mean thinkpad found. * On error, kfree() cleanup on tp->* is not performed, caller must do it */ @@ -7411,10 +7724,15 @@ static int __must_check __init get_thinkpad_model_data( tp->bios_version_str = kstrdup(s, GFP_KERNEL); if (s && !tp->bios_version_str) return -ENOMEM; - if (!tp->bios_version_str) + + /* Really ancient ThinkPad 240X will fail this, which is fine */ + if (!tpacpi_is_valid_fw_id(tp->bios_version_str, 'E')) return 0; + tp->bios_model = tp->bios_version_str[0] | (tp->bios_version_str[1] << 8); + tp->bios_release = (tp->bios_version_str[4] << 8) + | tp->bios_version_str[5]; /* * ThinkPad T23 or newer, A31 or newer, R50e or newer, @@ -7433,8 +7751,21 @@ static int __must_check __init get_thinkpad_model_data( tp->ec_version_str = kstrdup(ec_fw_string, GFP_KERNEL); if (!tp->ec_version_str) return -ENOMEM; - tp->ec_model = ec_fw_string[0] - | (ec_fw_string[1] << 8); + + if (tpacpi_is_valid_fw_id(ec_fw_string, 'H')) { + tp->ec_model = ec_fw_string[0] + | (ec_fw_string[1] << 8); + tp->ec_release = (ec_fw_string[4] << 8) + | ec_fw_string[5]; + } else { + printk(TPACPI_NOTICE + "ThinkPad firmware release %s " + "doesn't match the known patterns\n", + ec_fw_string); + printk(TPACPI_NOTICE + "please report this to %s\n", + TPACPI_MAIL); + } break; } } diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c index 7f207f3..ef3a2cd3a 100644 --- a/drivers/pnp/pnpacpi/rsparser.c +++ b/drivers/pnp/pnpacpi/rsparser.c @@ -287,6 +287,25 @@ static void pnpacpi_parse_allocated_address_space(struct pnp_dev *dev, ACPI_DECODE_16); } +static void pnpacpi_parse_allocated_ext_address_space(struct pnp_dev *dev, + struct acpi_resource *res) +{ + struct acpi_resource_extended_address64 *p = &res->data.ext_address64; + + if (p->producer_consumer == ACPI_PRODUCER) + return; + + if (p->resource_type == ACPI_MEMORY_RANGE) + pnpacpi_parse_allocated_memresource(dev, + p->minimum, p->address_length, + p->info.mem.write_protect); + else if (p->resource_type == ACPI_IO_RANGE) + pnpacpi_parse_allocated_ioresource(dev, + p->minimum, p->address_length, + p->granularity == 0xfff ? ACPI_DECODE_10 : + ACPI_DECODE_16); +} + static acpi_status pnpacpi_allocated_resource(struct acpi_resource *res, void *data) { @@ -400,8 +419,7 @@ static acpi_status pnpacpi_allocated_resource(struct acpi_resource *res, break; case ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64: - if (res->data.ext_address64.producer_consumer == ACPI_PRODUCER) - return AE_OK; + pnpacpi_parse_allocated_ext_address_space(dev, res); break; case ACPI_RESOURCE_TYPE_EXTENDED_IRQ: @@ -630,6 +648,28 @@ static __init void pnpacpi_parse_address_option(struct pnp_dev *dev, IORESOURCE_IO_FIXED); } +static __init void pnpacpi_parse_ext_address_option(struct pnp_dev *dev, + unsigned int option_flags, + struct acpi_resource *r) +{ + struct acpi_resource_extended_address64 *p = &r->data.ext_address64; + unsigned char flags = 0; + + if (p->address_length == 0) + return; + + if (p->resource_type == ACPI_MEMORY_RANGE) { + if (p->info.mem.write_protect == ACPI_READ_WRITE_MEMORY) + flags = IORESOURCE_MEM_WRITEABLE; + pnp_register_mem_resource(dev, option_flags, p->minimum, + p->minimum, 0, p->address_length, + flags); + } else if (p->resource_type == ACPI_IO_RANGE) + pnp_register_port_resource(dev, option_flags, p->minimum, + p->minimum, 0, p->address_length, + IORESOURCE_IO_FIXED); +} + struct acpipnp_parse_option_s { struct pnp_dev *dev; unsigned int option_flags; @@ -711,6 +751,7 @@ static __init acpi_status pnpacpi_option_resource(struct acpi_resource *res, break; case ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64: + pnpacpi_parse_ext_address_option(dev, option_flags, res); break; case ACPI_RESOURCE_TYPE_EXTENDED_IRQ: @@ -765,6 +806,7 @@ static int pnpacpi_supported_resource(struct acpi_resource *res) case ACPI_RESOURCE_TYPE_ADDRESS16: case ACPI_RESOURCE_TYPE_ADDRESS32: case ACPI_RESOURCE_TYPE_ADDRESS64: + case ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64: case ACPI_RESOURCE_TYPE_EXTENDED_IRQ: return 1; } diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index c34b110..bf1f43b 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -168,7 +168,7 @@ struct acpi_device_dir { /* Plug and Play */ -typedef char acpi_bus_id[5]; +typedef char acpi_bus_id[8]; typedef unsigned long acpi_bus_address; typedef char acpi_hardware_id[15]; typedef char acpi_unique_id[9]; @@ -365,10 +365,10 @@ struct acpi_bus_type { int register_acpi_bus_type(struct acpi_bus_type *); int unregister_acpi_bus_type(struct acpi_bus_type *); struct device *acpi_get_physical_device(acpi_handle); -struct device *acpi_get_physical_pci_device(acpi_handle); /* helper */ acpi_handle acpi_get_child(acpi_handle, acpi_integer); +int acpi_is_root_bridge(acpi_handle); acpi_handle acpi_get_pci_rootbridge_handle(unsigned int, unsigned int); #define DEVICE_ACPI_HANDLE(dev) ((acpi_handle)((dev)->archdata.acpi_handle)) diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h index 0352c8f..f4906f6 100644 --- a/include/acpi/acpi_drivers.h +++ b/include/acpi/acpi_drivers.h @@ -57,8 +57,7 @@ */ #define ACPI_POWER_HID "LNXPOWER" -#define ACPI_PROCESSOR_OBJECT_HID "ACPI_CPU" -#define ACPI_PROCESSOR_HID "ACPI0007" +#define ACPI_PROCESSOR_OBJECT_HID "LNXCPU" #define ACPI_SYSTEM_HID "LNXSYSTM" #define ACPI_THERMAL_HID "LNXTHERM" #define ACPI_BUTTON_HID_POWERF "LNXPWRBN" @@ -91,17 +90,15 @@ int acpi_pci_link_free_irq(acpi_handle handle); /* ACPI PCI Interrupt Routing (pci_irq.c) */ -int acpi_pci_irq_add_prt(acpi_handle handle, int segment, int bus); -void acpi_pci_irq_del_prt(int segment, int bus); +int acpi_pci_irq_add_prt(acpi_handle handle, struct pci_bus *bus); +void acpi_pci_irq_del_prt(struct pci_bus *bus); /* ACPI PCI Device Binding (pci_bind.c) */ struct pci_bus; -acpi_status acpi_get_pci_id(acpi_handle handle, struct acpi_pci_id *id); -int acpi_pci_bind(struct acpi_device *device); -int acpi_pci_bind_root(struct acpi_device *device, struct acpi_pci_id *id, - struct pci_bus *bus); +struct pci_dev *acpi_get_pci_dev(acpi_handle); +int acpi_pci_bind_root(struct acpi_device *device); /* Arch-defined function to add a bus to the system */ diff --git a/include/acpi/processor.h b/include/acpi/processor.h index 4927c06..baf1e0a 100644 --- a/include/acpi/processor.h +++ b/include/acpi/processor.h @@ -258,6 +258,7 @@ DECLARE_PER_CPU(struct acpi_processor *, processors); extern struct acpi_processor_errata errata; void arch_acpi_processor_init_pdc(struct acpi_processor *pr); +void arch_acpi_processor_cleanup_pdc(struct acpi_processor *pr); #ifdef ARCH_HAS_POWER_INIT void acpi_processor_power_init_bm_check(struct acpi_processor_flags *flags, diff --git a/include/acpi/video.h b/include/acpi/video.h index af6fe95..cf7be3d 100644 --- a/include/acpi/video.h +++ b/include/acpi/video.h @@ -3,10 +3,10 @@ #if (defined CONFIG_ACPI_VIDEO || defined CONFIG_ACPI_VIDEO_MODULE) extern int acpi_video_register(void); -extern int acpi_video_exit(void); +extern void acpi_video_unregister(void); #else static inline int acpi_video_register(void) { return 0; } -static inline void acpi_video_exit(void) { return; } +static inline void acpi_video_unregister(void) { return; } #endif #endif diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 51b4b0a..34321cf 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -113,9 +113,6 @@ void acpi_irq_stats_init(void); extern u32 acpi_irq_handled; extern u32 acpi_irq_not_handled; -extern struct acpi_mcfg_allocation *pci_mmcfg_config; -extern int pci_mmcfg_config_num; - extern int sbf_port; extern unsigned long acpi_realmode_flags; @@ -293,7 +290,10 @@ void __init acpi_s4_no_nvs(void); OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL) extern acpi_status acpi_pci_osc_control_set(acpi_handle handle, u32 flags); +extern void acpi_early_init(void); + #else /* CONFIG_ACPI */ +static inline void acpi_early_init(void) { } static inline int early_acpi_boot_init(void) { diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h index b3646cd..4391741 100644 --- a/include/linux/pci_hotplug.h +++ b/include/linux/pci_hotplug.h @@ -229,7 +229,6 @@ struct hotplug_params { extern acpi_status acpi_get_hp_params_from_firmware(struct pci_bus *bus, struct hotplug_params *hpp); int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags); -int acpi_root_bridge(acpi_handle handle); int acpi_pci_check_ejectable(struct pci_bus *pbus, acpi_handle handle); int acpi_pci_detect_ejectable(struct pci_bus *pbus); #endif diff --git a/init/main.c b/init/main.c index 4870dfe..2c5ade7 100644 --- a/init/main.c +++ b/init/main.c @@ -24,6 +24,7 @@ #include <linux/smp_lock.h> #include <linux/initrd.h> #include <linux/bootmem.h> +#include <linux/acpi.h> #include <linux/tty.h> #include <linux/gfp.h> #include <linux/percpu.h> @@ -88,11 +89,6 @@ extern void sbus_init(void); extern void prio_tree_init(void); extern void radix_tree_init(void); extern void free_initmem(void); -#ifdef CONFIG_ACPI -extern void acpi_early_init(void); -#else -static inline void acpi_early_init(void) { } -#endif #ifndef CONFIG_DEBUG_RODATA static inline void mark_rodata_ro(void) { } #endif |