diff options
Diffstat (limited to 'arch/arm')
54 files changed, 685 insertions, 687 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index c8d94dc..620f2ca 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -361,6 +361,11 @@ config NO_IDLE_HZ Alternatively, if you want dynamic tick automatically enabled during boot, pass "dyntick=enable" via the kernel command string. + Please note that dynamic tick may affect the accuracy of + timekeeping on some platforms depending on the implementation. + Currently at least OMAP platform is known to have accurate + timekeeping with dynamic tick. + config ARCH_DISCONTIGMEM_ENABLE bool default (ARCH_LH7A40X && !LH7A40X_CONTIGMEM) diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index 4c38bd8..b713c44 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -30,9 +30,6 @@ extern void __lshrdi3(void); extern void __modsi3(void); extern void __muldi3(void); extern void __ucmpdi2(void); -extern void __udivdi3(void); -extern void __umoddi3(void); -extern void __udivmoddi4(void); extern void __udivsi3(void); extern void __umodsi3(void); extern void __do_div64(void); @@ -134,9 +131,6 @@ EXPORT_SYMBOL(__lshrdi3); EXPORT_SYMBOL(__modsi3); EXPORT_SYMBOL(__muldi3); EXPORT_SYMBOL(__ucmpdi2); -EXPORT_SYMBOL(__udivdi3); -EXPORT_SYMBOL(__umoddi3); -EXPORT_SYMBOL(__udivmoddi4); EXPORT_SYMBOL(__udivsi3); EXPORT_SYMBOL(__umodsi3); EXPORT_SYMBOL(__do_div64); diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 8f146a4..bbea636 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -32,6 +32,7 @@ #include <asm/leds.h> #include <asm/processor.h> #include <asm/uaccess.h> +#include <asm/mach/time.h> extern const char *processor_modes[]; extern void setup_mm_for_reboot(char mode); @@ -85,8 +86,10 @@ EXPORT_SYMBOL(pm_power_off); void default_idle(void) { local_irq_disable(); - if (!need_resched() && !hlt_counter) + if (!need_resched() && !hlt_counter) { + timer_dyn_reprogram(); arch_idle(); + } local_irq_enable(); } diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 8cf733d..35b7273 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -359,7 +359,8 @@ void cpu_init(void) "I" (offsetof(struct stack, abt[0])), "I" (PSR_F_BIT | PSR_I_BIT | UND_MODE), "I" (offsetof(struct stack, und[0])), - "I" (PSR_F_BIT | PSR_I_BIT | SVC_MODE)); + "I" (PSR_F_BIT | PSR_I_BIT | SVC_MODE) + : "r14"); } static struct machine_desc * __init setup_machine(unsigned int nr) diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 3489275..a931409 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -502,3 +502,126 @@ int __init setup_profiling_timer(unsigned int multiplier) { return -EINVAL; } + +static int +on_each_cpu_mask(void (*func)(void *), void *info, int retry, int wait, + cpumask_t mask) +{ + int ret = 0; + + preempt_disable(); + + ret = smp_call_function_on_cpu(func, info, retry, wait, mask); + if (cpu_isset(smp_processor_id(), mask)) + func(info); + + preempt_enable(); + + return ret; +} + +/**********************************************************************/ + +/* + * TLB operations + */ +struct tlb_args { + struct vm_area_struct *ta_vma; + unsigned long ta_start; + unsigned long ta_end; +}; + +static inline void ipi_flush_tlb_all(void *ignored) +{ + local_flush_tlb_all(); +} + +static inline void ipi_flush_tlb_mm(void *arg) +{ + struct mm_struct *mm = (struct mm_struct *)arg; + + local_flush_tlb_mm(mm); +} + +static inline void ipi_flush_tlb_page(void *arg) +{ + struct tlb_args *ta = (struct tlb_args *)arg; + + local_flush_tlb_page(ta->ta_vma, ta->ta_start); +} + +static inline void ipi_flush_tlb_kernel_page(void *arg) +{ + struct tlb_args *ta = (struct tlb_args *)arg; + + local_flush_tlb_kernel_page(ta->ta_start); +} + +static inline void ipi_flush_tlb_range(void *arg) +{ + struct tlb_args *ta = (struct tlb_args *)arg; + + local_flush_tlb_range(ta->ta_vma, ta->ta_start, ta->ta_end); +} + +static inline void ipi_flush_tlb_kernel_range(void *arg) +{ + struct tlb_args *ta = (struct tlb_args *)arg; + + local_flush_tlb_kernel_range(ta->ta_start, ta->ta_end); +} + +void flush_tlb_all(void) +{ + on_each_cpu(ipi_flush_tlb_all, NULL, 1, 1); +} + +void flush_tlb_mm(struct mm_struct *mm) +{ + cpumask_t mask = mm->cpu_vm_mask; + + on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, 1, mask); +} + +void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) +{ + cpumask_t mask = vma->vm_mm->cpu_vm_mask; + struct tlb_args ta; + + ta.ta_vma = vma; + ta.ta_start = uaddr; + + on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, 1, mask); +} + +void flush_tlb_kernel_page(unsigned long kaddr) +{ + struct tlb_args ta; + + ta.ta_start = kaddr; + + on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1, 1); +} + +void flush_tlb_range(struct vm_area_struct *vma, + unsigned long start, unsigned long end) +{ + cpumask_t mask = vma->vm_mm->cpu_vm_mask; + struct tlb_args ta; + + ta.ta_vma = vma; + ta.ta_start = start; + ta.ta_end = end; + + on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, 1, mask); +} + +void flush_tlb_kernel_range(unsigned long start, unsigned long end) +{ + struct tlb_args ta; + + ta.ta_start = start; + ta.ta_end = end; + + on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1, 1); +} diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index 06054c9..1b7fcd5 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -424,15 +424,19 @@ static int timer_dyn_tick_disable(void) return ret; } +/* + * Reprogram the system timer for at least the calculated time interval. + * This function should be called from the idle thread with IRQs disabled, + * immediately before sleeping. + */ void timer_dyn_reprogram(void) { struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick; - unsigned long flags; - write_seqlock_irqsave(&xtime_lock, flags); + write_seqlock(&xtime_lock); if (dyn_tick->state & DYN_TICK_ENABLED) dyn_tick->reprogram(next_timer_interrupt() - jiffies); - write_sequnlock_irqrestore(&xtime_lock, flags); + write_sequnlock(&xtime_lock); } static ssize_t timer_show_dyn_tick(struct sys_device *dev, char *buf) diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index c0e6583..8725d63 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -11,7 +11,7 @@ lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \ strnlen_user.o strchr.o strrchr.o testchangebit.o \ testclearbit.o testsetbit.o uaccess.o getuser.o \ putuser.o ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \ - ucmpdi2.o udivdi3.o lib1funcs.o div64.o \ + ucmpdi2.o lib1funcs.o div64.o \ io-readsb.o io-writesb.o io-readsl.o io-writesl.o ifeq ($(CONFIG_CPU_32v3),y) diff --git a/arch/arm/lib/longlong.h b/arch/arm/lib/longlong.h deleted file mode 100644 index 90ae647..0000000 --- a/arch/arm/lib/longlong.h +++ /dev/null @@ -1,183 +0,0 @@ -/* longlong.h -- based on code from gcc-2.95.3 - - definitions for mixed size 32/64 bit arithmetic. - Copyright (C) 1991, 92, 94, 95, 96, 1997, 1998 Free Software Foundation, Inc. - - This definition file is free software; you can redistribute it - and/or modify it under the terms of the GNU General Public - License as published by the Free Software Foundation; either - version 2, or (at your option) any later version. - - This definition file is distributed in the hope that it will be - useful, but WITHOUT ANY WARRANTY; without even the implied - warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - See the GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place - Suite 330, - Boston, MA 02111-1307, USA. */ - -/* Borrowed from GCC 2.95.3, I Molton 29/07/01 */ - -#ifndef SI_TYPE_SIZE -#define SI_TYPE_SIZE 32 -#endif - -#define __BITS4 (SI_TYPE_SIZE / 4) -#define __ll_B (1L << (SI_TYPE_SIZE / 2)) -#define __ll_lowpart(t) ((u32) (t) % __ll_B) -#define __ll_highpart(t) ((u32) (t) / __ll_B) - -/* Define auxiliary asm macros. - - 1) umul_ppmm(high_prod, low_prod, multipler, multiplicand) - multiplies two u32 integers MULTIPLER and MULTIPLICAND, - and generates a two-part u32 product in HIGH_PROD and - LOW_PROD. - - 2) __umulsidi3(a,b) multiplies two u32 integers A and B, - and returns a u64 product. This is just a variant of umul_ppmm. - - 3) udiv_qrnnd(quotient, remainder, high_numerator, low_numerator, - denominator) divides a two-word unsigned integer, composed by the - integers HIGH_NUMERATOR and LOW_NUMERATOR, by DENOMINATOR and - places the quotient in QUOTIENT and the remainder in REMAINDER. - HIGH_NUMERATOR must be less than DENOMINATOR for correct operation. - If, in addition, the most significant bit of DENOMINATOR must be 1, - then the pre-processor symbol UDIV_NEEDS_NORMALIZATION is defined to 1. - - 4) sdiv_qrnnd(quotient, remainder, high_numerator, low_numerator, - denominator). Like udiv_qrnnd but the numbers are signed. The - quotient is rounded towards 0. - - 5) count_leading_zeros(count, x) counts the number of zero-bits from - the msb to the first non-zero bit. This is the number of steps X - needs to be shifted left to set the msb. Undefined for X == 0. - - 6) add_ssaaaa(high_sum, low_sum, high_addend_1, low_addend_1, - high_addend_2, low_addend_2) adds two two-word unsigned integers, - composed by HIGH_ADDEND_1 and LOW_ADDEND_1, and HIGH_ADDEND_2 and - LOW_ADDEND_2 respectively. The result is placed in HIGH_SUM and - LOW_SUM. Overflow (i.e. carry out) is not stored anywhere, and is - lost. - - 7) sub_ddmmss(high_difference, low_difference, high_minuend, - low_minuend, high_subtrahend, low_subtrahend) subtracts two - two-word unsigned integers, composed by HIGH_MINUEND_1 and - LOW_MINUEND_1, and HIGH_SUBTRAHEND_2 and LOW_SUBTRAHEND_2 - respectively. The result is placed in HIGH_DIFFERENCE and - LOW_DIFFERENCE. Overflow (i.e. carry out) is not stored anywhere, - and is lost. - - If any of these macros are left undefined for a particular CPU, - C macros are used. */ - -#if defined (__arm__) -#define add_ssaaaa(sh, sl, ah, al, bh, bl) \ - __asm__ ("adds %1, %4, %5 \n\ - adc %0, %2, %3" \ - : "=r" ((u32) (sh)), \ - "=&r" ((u32) (sl)) \ - : "%r" ((u32) (ah)), \ - "rI" ((u32) (bh)), \ - "%r" ((u32) (al)), \ - "rI" ((u32) (bl))) -#define sub_ddmmss(sh, sl, ah, al, bh, bl) \ - __asm__ ("subs %1, %4, %5 \n\ - sbc %0, %2, %3" \ - : "=r" ((u32) (sh)), \ - "=&r" ((u32) (sl)) \ - : "r" ((u32) (ah)), \ - "rI" ((u32) (bh)), \ - "r" ((u32) (al)), \ - "rI" ((u32) (bl))) -#define umul_ppmm(xh, xl, a, b) \ -{register u32 __t0, __t1, __t2; \ - __asm__ ("%@ Inlined umul_ppmm \n\ - mov %2, %5, lsr #16 \n\ - mov %0, %6, lsr #16 \n\ - bic %3, %5, %2, lsl #16 \n\ - bic %4, %6, %0, lsl #16 \n\ - mul %1, %3, %4 \n\ - mul %4, %2, %4 \n\ - mul %3, %0, %3 \n\ - mul %0, %2, %0 \n\ - adds %3, %4, %3 \n\ - addcs %0, %0, #65536 \n\ - adds %1, %1, %3, lsl #16 \n\ - adc %0, %0, %3, lsr #16" \ - : "=&r" ((u32) (xh)), \ - "=r" ((u32) (xl)), \ - "=&r" (__t0), "=&r" (__t1), "=r" (__t2) \ - : "r" ((u32) (a)), \ - "r" ((u32) (b)));} -#define UMUL_TIME 20 -#define UDIV_TIME 100 -#endif /* __arm__ */ - -#define __umulsidi3(u, v) \ - ({DIunion __w; \ - umul_ppmm (__w.s.high, __w.s.low, u, v); \ - __w.ll; }) - -#define __udiv_qrnnd_c(q, r, n1, n0, d) \ - do { \ - u32 __d1, __d0, __q1, __q0; \ - u32 __r1, __r0, __m; \ - __d1 = __ll_highpart (d); \ - __d0 = __ll_lowpart (d); \ - \ - __r1 = (n1) % __d1; \ - __q1 = (n1) / __d1; \ - __m = (u32) __q1 * __d0; \ - __r1 = __r1 * __ll_B | __ll_highpart (n0); \ - if (__r1 < __m) \ - { \ - __q1--, __r1 += (d); \ - if (__r1 >= (d)) /* i.e. we didn't get carry when adding to __r1 */\ - if (__r1 < __m) \ - __q1--, __r1 += (d); \ - } \ - __r1 -= __m; \ - \ - __r0 = __r1 % __d1; \ - __q0 = __r1 / __d1; \ - __m = (u32) __q0 * __d0; \ - __r0 = __r0 * __ll_B | __ll_lowpart (n0); \ - if (__r0 < __m) \ - { \ - __q0--, __r0 += (d); \ - if (__r0 >= (d)) \ - if (__r0 < __m) \ - __q0--, __r0 += (d); \ - } \ - __r0 -= __m; \ - \ - (q) = (u32) __q1 * __ll_B | __q0; \ - (r) = __r0; \ - } while (0) - -#define UDIV_NEEDS_NORMALIZATION 1 -#define udiv_qrnnd __udiv_qrnnd_c - -#define count_leading_zeros(count, x) \ - do { \ - u32 __xr = (x); \ - u32 __a; \ - \ - if (SI_TYPE_SIZE <= 32) \ - { \ - __a = __xr < ((u32)1<<2*__BITS4) \ - ? (__xr < ((u32)1<<__BITS4) ? 0 : __BITS4) \ - : (__xr < ((u32)1<<3*__BITS4) ? 2*__BITS4 : 3*__BITS4); \ - } \ - else \ - { \ - for (__a = SI_TYPE_SIZE - 8; __a > 0; __a -= 8) \ - if (((__xr >> __a) & 0xff) != 0) \ - break; \ - } \ - \ - (count) = SI_TYPE_SIZE - (__clz_tab[__xr >> __a] + __a); \ - } while (0) diff --git a/arch/arm/lib/udivdi3.c b/arch/arm/lib/udivdi3.c deleted file mode 100644 index e343be4..0000000 --- a/arch/arm/lib/udivdi3.c +++ /dev/null @@ -1,222 +0,0 @@ -/* More subroutines needed by GCC output code on some machines. */ -/* Compile this one with gcc. */ -/* Copyright (C) 1989, 92-98, 1999 Free Software Foundation, Inc. - -This file is part of GNU CC. - -GNU CC is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 2, or (at your option) -any later version. - -GNU CC is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with GNU CC; see the file COPYING. If not, write to -the Free Software Foundation, 59 Temple Place - Suite 330, -Boston, MA 02111-1307, USA. */ - -/* As a special exception, if you link this library with other files, - some of which are compiled with GCC, to produce an executable, - this library does not by itself cause the resulting executable - to be covered by the GNU General Public License. - This exception does not however invalidate any other reasons why - the executable file might be covered by the GNU General Public License. - */ -/* support functions required by the kernel. based on code from gcc-2.95.3 */ -/* I Molton 29/07/01 */ - -#include "gcclib.h" -#include "longlong.h" - -static const u8 __clz_tab[] = { - 0, 1, 2, 2, 3, 3, 3, 3, 4, 4, 4, 4, 4, 4, 4, 4, 5, 5, 5, 5, 5, 5, 5, 5, - 5, 5, 5, 5, 5, 5, 5, 5, - 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, - 6, 6, 6, 6, 6, 6, 6, 6, - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, - 7, 7, 7, 7, 7, 7, 7, 7, - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, - 7, 7, 7, 7, 7, 7, 7, 7, - 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, - 8, 8, 8, 8, 8, 8, 8, 8, - 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, - 8, 8, 8, 8, 8, 8, 8, 8, - 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, - 8, 8, 8, 8, 8, 8, 8, 8, - 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, - 8, 8, 8, 8, 8, 8, 8, 8, -}; - -u64 __udivmoddi4(u64 n, u64 d, u64 * rp) -{ - DIunion ww; - DIunion nn, dd; - DIunion rr; - u32 d0, d1, n0, n1, n2; - u32 q0, q1; - u32 b, bm; - - nn.ll = n; - dd.ll = d; - - d0 = dd.s.low; - d1 = dd.s.high; - n0 = nn.s.low; - n1 = nn.s.high; - - if (d1 == 0) { - if (d0 > n1) { - /* 0q = nn / 0D */ - - count_leading_zeros(bm, d0); - - if (bm != 0) { - /* Normalize, i.e. make the most significant bit of the - denominator set. */ - - d0 = d0 << bm; - n1 = (n1 << bm) | (n0 >> (SI_TYPE_SIZE - bm)); - n0 = n0 << bm; - } - - udiv_qrnnd(q0, n0, n1, n0, d0); - q1 = 0; - - /* Remainder in n0 >> bm. */ - } else { - /* qq = NN / 0d */ - - if (d0 == 0) - d0 = 1 / d0; /* Divide intentionally by zero. */ - - count_leading_zeros(bm, d0); - - if (bm == 0) { - /* From (n1 >= d0) /\ (the most significant bit of d0 is set), - conclude (the most significant bit of n1 is set) /\ (the - leading quotient digit q1 = 1). - - This special case is necessary, not an optimization. - (Shifts counts of SI_TYPE_SIZE are undefined.) */ - - n1 -= d0; - q1 = 1; - } else { - /* Normalize. */ - - b = SI_TYPE_SIZE - bm; - - d0 = d0 << bm; - n2 = n1 >> b; - n1 = (n1 << bm) | (n0 >> b); - n0 = n0 << bm; - - udiv_qrnnd(q1, n1, n2, n1, d0); - } - - /* n1 != d0... */ - - udiv_qrnnd(q0, n0, n1, n0, d0); - - /* Remainder in n0 >> bm. */ - } - - if (rp != 0) { - rr.s.low = n0 >> bm; - rr.s.high = 0; - *rp = rr.ll; - } - } else { - if (d1 > n1) { - /* 00 = nn / DD */ - - q0 = 0; - q1 = 0; - - /* Remainder in n1n0. */ - if (rp != 0) { - rr.s.low = n0; - rr.s.high = n1; - *rp = rr.ll; - } - } else { - /* 0q = NN / dd */ - - count_leading_zeros(bm, d1); - if (bm == 0) { - /* From (n1 >= d1) /\ (the most significant bit of d1 is set), - conclude (the most significant bit of n1 is set) /\ (the - quotient digit q0 = 0 or 1). - - This special case is necessary, not an optimization. */ - - /* The condition on the next line takes advantage of that - n1 >= d1 (true due to program flow). */ - if (n1 > d1 || n0 >= d0) { - q0 = 1; - sub_ddmmss(n1, n0, n1, n0, d1, d0); - } else - q0 = 0; - - q1 = 0; - - if (rp != 0) { - rr.s.low = n0; - rr.s.high = n1; - *rp = rr.ll; - } - } else { - u32 m1, m0; - /* Normalize. */ - - b = SI_TYPE_SIZE - bm; - - d1 = (d1 << bm) | (d0 >> b); - d0 = d0 << bm; - n2 = n1 >> b; - n1 = (n1 << bm) | (n0 >> b); - n0 = n0 << bm; - - udiv_qrnnd(q0, n1, n2, n1, d1); - umul_ppmm(m1, m0, q0, d0); - - if (m1 > n1 || (m1 == n1 && m0 > n0)) { - q0--; - sub_ddmmss(m1, m0, m1, m0, d1, d0); - } - - q1 = 0; - - /* Remainder in (n1n0 - m1m0) >> bm. */ - if (rp != 0) { - sub_ddmmss(n1, n0, n1, n0, m1, m0); - rr.s.low = (n1 << b) | (n0 >> bm); - rr.s.high = n1 >> bm; - *rp = rr.ll; - } - } - } - } - - ww.s.low = q0; - ww.s.high = q1; - return ww.ll; -} - -u64 __udivdi3(u64 n, u64 d) -{ - return __udivmoddi4(n, d, (u64 *) 0); -} - -u64 __umoddi3(u64 u, u64 v) -{ - u64 w; - - (void)__udivmoddi4(u, v, &w); - - return w; -} diff --git a/arch/arm/mach-aaec2000/Makefile.boot b/arch/arm/mach-aaec2000/Makefile.boot new file mode 100644 index 0000000..8f5a8b7 --- /dev/null +++ b/arch/arm/mach-aaec2000/Makefile.boot @@ -0,0 +1 @@ + zreladdr-y := 0xf0008000 diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c index fc145b3..aece0cd 100644 --- a/arch/arm/mach-aaec2000/core.c +++ b/arch/arm/mach-aaec2000/core.c @@ -128,8 +128,8 @@ aaec2000_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction aaec2000_timer_irq = { .name = "AAEC-2000 Timer Tick", - .flags = SA_INTERRUPT, - .handler = aaec2000_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = aaec2000_timer_interrupt, }; static void __init aaec2000_timer_init(void) diff --git a/arch/arm/mach-clps711x/time.c b/arch/arm/mach-clps711x/time.c index 383d4e0..1a23f0d 100644 --- a/arch/arm/mach-clps711x/time.c +++ b/arch/arm/mach-clps711x/time.c @@ -57,8 +57,8 @@ p720t_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction clps711x_timer_irq = { .name = "CLPS711x Timer Tick", - .flags = SA_INTERRUPT, - .handler = p720t_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = p720t_timer_interrupt, }; static void __init clps711x_timer_init(void) diff --git a/arch/arm/mach-clps7500/core.c b/arch/arm/mach-clps7500/core.c index 0bc7da4..90e85f4 100644 --- a/arch/arm/mach-clps7500/core.c +++ b/arch/arm/mach-clps7500/core.c @@ -298,8 +298,8 @@ clps7500_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction clps7500_timer_irq = { .name = "CLPS7500 Timer Tick", - .flags = SA_INTERRUPT, - .handler = clps7500_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = clps7500_timer_interrupt, }; /* diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c index ef362d4..86ffdbb 100644 --- a/arch/arm/mach-ebsa110/core.c +++ b/arch/arm/mach-ebsa110/core.c @@ -173,8 +173,8 @@ ebsa110_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction ebsa110_timer_irq = { .name = "EBSA110 Timer Tick", - .flags = SA_INTERRUPT, - .handler = ebsa110_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = ebsa110_timer_interrupt, }; /* diff --git a/arch/arm/mach-epxa10db/time.c b/arch/arm/mach-epxa10db/time.c index 1b991f3..4b1084d 100644 --- a/arch/arm/mach-epxa10db/time.c +++ b/arch/arm/mach-epxa10db/time.c @@ -56,8 +56,8 @@ epxa10db_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction epxa10db_timer_irq = { .name = "Excalibur Timer Tick", - .flags = SA_INTERRUPT, - .handler = epxa10db_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = epxa10db_timer_interrupt, }; /* diff --git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c index da5b9b7..14a62d6 100644 --- a/arch/arm/mach-footbridge/dc21285-timer.c +++ b/arch/arm/mach-footbridge/dc21285-timer.c @@ -43,7 +43,7 @@ timer1_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction footbridge_timer_irq = { .name = "Timer1 timer tick", .handler = timer1_interrupt, - .flags = SA_INTERRUPT, + .flags = SA_INTERRUPT | SA_TIMER, }; /* diff --git a/arch/arm/mach-footbridge/isa-timer.c b/arch/arm/mach-footbridge/isa-timer.c index a4fefa0..c1d74f7 100644 --- a/arch/arm/mach-footbridge/isa-timer.c +++ b/arch/arm/mach-footbridge/isa-timer.c @@ -72,7 +72,7 @@ isa_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction isa_timer_irq = { .name = "ISA timer tick", .handler = isa_timer_interrupt, - .flags = SA_INTERRUPT, + .flags = SA_INTERRUPT | SA_TIMER, }; static void __init isa_timer_init(void) diff --git a/arch/arm/mach-h720x/cpu-h7201.c b/arch/arm/mach-h720x/cpu-h7201.c index 7436568..af9e4a5 100644 --- a/arch/arm/mach-h720x/cpu-h7201.c +++ b/arch/arm/mach-h720x/cpu-h7201.c @@ -41,8 +41,8 @@ h7201_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction h7201_timer_irq = { .name = "h7201 Timer Tick", - .flags = SA_INTERRUPT, - .handler = h7201_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = h7201_timer_interrupt, }; /* diff --git a/arch/arm/mach-h720x/cpu-h7202.c b/arch/arm/mach-h720x/cpu-h7202.c index 21b8fb6..593b6a2 100644 --- a/arch/arm/mach-h720x/cpu-h7202.c +++ b/arch/arm/mach-h720x/cpu-h7202.c @@ -171,8 +171,8 @@ static struct irqchip h7202_timerx_chip = { static struct irqaction h7202_timer_irq = { .name = "h7202 Timer Tick", - .flags = SA_INTERRUPT, - .handler = h7202_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = h7202_timer_interrupt, }; /* diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c index 11f1e56..ea805bf 100644 --- a/arch/arm/mach-imx/time.c +++ b/arch/arm/mach-imx/time.c @@ -72,8 +72,8 @@ imx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction imx_timer_irq = { .name = "i.MX Timer Tick", - .flags = SA_INTERRUPT, - .handler = imx_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = imx_timer_interrupt, }; /* diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index bd1e5e3..dacbf50 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -20,6 +20,7 @@ #include <asm/irq.h> #include <asm/io.h> #include <asm/hardware/amba.h> +#include <asm/hardware/arm_timer.h> #include <asm/arch/cm.h> #include <asm/system.h> #include <asm/leds.h> @@ -156,16 +157,6 @@ EXPORT_SYMBOL(cm_control); #define TICKS2USECS(x) ((x) / TICKS_PER_uSEC) #endif -/* - * What does it look like? - */ -typedef struct TimerStruct { - unsigned long TimerLoad; - unsigned long TimerValue; - unsigned long TimerControl; - unsigned long TimerClear; -} TimerStruct_t; - static unsigned long timer_reload; /* @@ -174,7 +165,6 @@ static unsigned long timer_reload; */ unsigned long integrator_gettimeoffset(void) { - volatile TimerStruct_t *timer1 = (TimerStruct_t *)TIMER1_VA_BASE; unsigned long ticks1, ticks2, status; /* @@ -183,11 +173,11 @@ unsigned long integrator_gettimeoffset(void) * an interrupt. We get around this by ensuring that the * counter has not reloaded between our two reads. */ - ticks2 = timer1->TimerValue & 0xffff; + ticks2 = readl(TIMER1_VA_BASE + TIMER_VALUE) & 0xffff; do { ticks1 = ticks2; status = __raw_readl(VA_IC_BASE + IRQ_RAW_STATUS); - ticks2 = timer1->TimerValue & 0xffff; + ticks2 = readl(TIMER1_VA_BASE + TIMER_VALUE) & 0xffff; } while (ticks2 > ticks1); /* @@ -213,14 +203,12 @@ unsigned long integrator_gettimeoffset(void) static irqreturn_t integrator_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) { - volatile TimerStruct_t *timer1 = (volatile TimerStruct_t *)TIMER1_VA_BASE; - write_seqlock(&xtime_lock); /* * clear the interrupt */ - timer1->TimerClear = 1; + writel(1, TIMER1_VA_BASE + TIMER_INTCLR); /* * the clock tick routines are only processed on the @@ -247,8 +235,8 @@ integrator_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction integrator_timer_irq = { .name = "Integrator Timer Tick", - .flags = SA_INTERRUPT, - .handler = integrator_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = integrator_timer_interrupt, }; /* @@ -256,32 +244,29 @@ static struct irqaction integrator_timer_irq = { */ void __init integrator_time_init(unsigned long reload, unsigned int ctrl) { - volatile TimerStruct_t *timer0 = (volatile TimerStruct_t *)TIMER0_VA_BASE; - volatile TimerStruct_t *timer1 = (volatile TimerStruct_t *)TIMER1_VA_BASE; - volatile TimerStruct_t *timer2 = (volatile TimerStruct_t *)TIMER2_VA_BASE; - unsigned int timer_ctrl = 0x80 | 0x40; /* periodic */ + unsigned int timer_ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC; timer_reload = reload; timer_ctrl |= ctrl; if (timer_reload > 0x100000) { timer_reload >>= 8; - timer_ctrl |= 0x08; /* /256 */ + timer_ctrl |= TIMER_CTRL_DIV256; } else if (timer_reload > 0x010000) { timer_reload >>= 4; - timer_ctrl |= 0x04; /* /16 */ + timer_ctrl |= TIMER_CTRL_DIV16; } /* * Initialise to a known state (all timers off) */ - timer0->TimerControl = 0; - timer1->TimerControl = 0; - timer2->TimerControl = 0; + writel(0, TIMER0_VA_BASE + TIMER_CTRL); + writel(0, TIMER1_VA_BASE + TIMER_CTRL); + writel(0, TIMER2_VA_BASE + TIMER_CTRL); - timer1->TimerLoad = timer_reload; - timer1->TimerValue = timer_reload; - timer1->TimerControl = timer_ctrl; + writel(timer_reload, TIMER1_VA_BASE + TIMER_LOAD); + writel(timer_reload, TIMER1_VA_BASE + TIMER_VALUE); + writel(timer_ctrl, TIMER1_VA_BASE + TIMER_CTRL); /* * Make irqs happen for the system timer diff --git a/arch/arm/mach-iop3xx/iop321-time.c b/arch/arm/mach-iop3xx/iop321-time.c index 9b7dd64..d53af16 100644 --- a/arch/arm/mach-iop3xx/iop321-time.c +++ b/arch/arm/mach-iop3xx/iop321-time.c @@ -86,7 +86,7 @@ iop321_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction iop321_timer_irq = { .name = "IOP321 Timer Tick", .handler = iop321_timer_interrupt, - .flags = SA_INTERRUPT + .flags = SA_INTERRUPT | SA_TIMER, }; static void __init iop321_timer_init(void) diff --git a/arch/arm/mach-iop3xx/iop331-time.c b/arch/arm/mach-iop3xx/iop331-time.c index e016967..1a6d9d6 100644 --- a/arch/arm/mach-iop3xx/iop331-time.c +++ b/arch/arm/mach-iop3xx/iop331-time.c @@ -83,7 +83,7 @@ iop331_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction iop331_timer_irq = { .name = "IOP331 Timer Tick", .handler = iop331_timer_interrupt, - .flags = SA_INTERRUPT + .flags = SA_INTERRUPT | SA_TIMER, }; static void __init iop331_timer_init(void) diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c index 0ee34ac..4b9d841 100644 --- a/arch/arm/mach-ixp2000/core.c +++ b/arch/arm/mach-ixp2000/core.c @@ -103,6 +103,11 @@ static struct map_desc ixp2000_io_desc[] __initdata = { .length = IXP2000_PCI_CSR_SIZE, .type = MT_DEVICE }, { + .virtual = IXP2000_MSF_VIRT_BASE, + .physical = IXP2000_MSF_PHYS_BASE, + .length = IXP2000_MSF_SIZE, + .type = MT_DEVICE + }, { .virtual = IXP2000_PCI_IO_VIRT_BASE, .physical = IXP2000_PCI_IO_PHYS_BASE, .length = IXP2000_PCI_IO_SIZE, @@ -194,8 +199,8 @@ static int ixp2000_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction ixp2000_timer_irq = { .name = "IXP2000 Timer Tick", - .flags = SA_INTERRUPT, - .handler = ixp2000_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = ixp2000_timer_interrupt, }; void __init ixp2000_init_time(unsigned long tick_rate) diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c index aec13c7..468a4bb 100644 --- a/arch/arm/mach-ixp2000/ixdp2800.c +++ b/arch/arm/mach-ixp2000/ixdp2800.c @@ -42,12 +42,6 @@ #include <asm/mach/flash.h> #include <asm/mach/arch.h> - -void ixdp2400_init_irq(void) -{ - ixdp2x00_init_irq(IXDP2800_CPLD_INT_STAT, IXDP2800_CPLD_INT_MASK, IXDP2400_NR_IRQS); -} - /************************************************************************* * IXDP2800 timer tick *************************************************************************/ diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index f39e8408..04490a9 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -298,8 +298,8 @@ static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id, struct pt_regs static struct irqaction ixp4xx_timer_irq = { .name = "IXP4xx Timer Tick", - .flags = SA_INTERRUPT, - .handler = ixp4xx_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = ixp4xx_timer_interrupt, }; static void __init ixp4xx_timer_init(void) diff --git a/arch/arm/mach-lh7a40x/time.c b/arch/arm/mach-lh7a40x/time.c index 51e1c81..be377e3 100644 --- a/arch/arm/mach-lh7a40x/time.c +++ b/arch/arm/mach-lh7a40x/time.c @@ -53,8 +53,8 @@ lh7a40x_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction lh7a40x_timer_irq = { .name = "LHA740x Timer Tick", - .flags = SA_INTERRUPT, - .handler = lh7a40x_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = lh7a40x_timer_interrupt, }; static void __init lh7a40x_timer_init(void) diff --git a/arch/arm/mach-omap/pm.c b/arch/arm/mach-omap/pm.c index 00fac15..6b03ccd 100644 --- a/arch/arm/mach-omap/pm.c +++ b/arch/arm/mach-omap/pm.c @@ -41,7 +41,9 @@ #include <linux/pm.h> #include <asm/io.h> +#include <asm/mach/time.h> #include <asm/mach-types.h> + #include <asm/arch/omap16xx.h> #include <asm/arch/pm.h> #include <asm/arch/mux.h> @@ -80,13 +82,13 @@ void omap_pm_idle(void) return; } mask32 = omap_readl(ARM_SYSST); - local_fiq_enable(); - local_irq_enable(); -#if defined(CONFIG_OMAP_32K_TIMER) && defined(CONFIG_NO_IDLE_HZ) - /* Override timer to use VST for the next cycle */ - omap_32k_timer_next_vst_interrupt(); -#endif + /* + * Since an interrupt may set up a timer, we don't want to + * reprogram the hardware timer with interrupts enabled. + * Re-enable interrupts only after returning from idle. + */ + timer_dyn_reprogram(); if ((mask32 & DSP_IDLE) == 0) { __asm__ volatile ("mcr p15, 0, r0, c7, c0, 4"); @@ -102,6 +104,8 @@ void omap_pm_idle(void) func_ptr(); } + local_fiq_enable(); + local_irq_enable(); } /* diff --git a/arch/arm/mach-omap/time.c b/arch/arm/mach-omap/time.c index 4205fdc..dd34e9f 100644 --- a/arch/arm/mach-omap/time.c +++ b/arch/arm/mach-omap/time.c @@ -4,7 +4,7 @@ * OMAP Timers * * Copyright (C) 2004 Nokia Corporation - * Partial timer rewrite and additional VST timer support by + * Partial timer rewrite and additional dynamic tick timer support by * Tony Lindgen <tony@atomide.com> and * Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> * @@ -188,8 +188,8 @@ static irqreturn_t omap_mpu_timer_interrupt(int irq, void *dev_id, static struct irqaction omap_mpu_timer_irq = { .name = "mpu timer", - .flags = SA_INTERRUPT, - .handler = omap_mpu_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = omap_mpu_timer_interrupt, }; static unsigned long omap_mpu_timer1_overflows; @@ -203,7 +203,7 @@ static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id, static struct irqaction omap_mpu_timer1_irq = { .name = "mpu timer1 overflow", .flags = SA_INTERRUPT, - .handler = omap_mpu_timer1_interrupt + .handler = omap_mpu_timer1_interrupt, }; static __init void omap_init_mpu_timer(void) @@ -261,7 +261,6 @@ unsigned long long sched_clock(void) * so with HZ = 100, TVR = 327.68. */ #define OMAP_32K_TIMER_TICK_PERIOD ((32768 / HZ) - 1) -#define MAX_SKIP_JIFFIES 25 #define TIMER_32K_SYNCHRONIZED 0xfffbc410 #define JIFFIES_TO_HW_TICKS(nr_jiffies, clock_rate) \ @@ -347,14 +346,55 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id, return IRQ_HANDLED; } +#ifdef CONFIG_NO_IDLE_HZ +/* + * Programs the next timer interrupt needed. Called when dynamic tick is + * enabled, and to reprogram the ticks to skip from pm_idle. Note that + * we can keep the timer continuous, and don't need to set it to run in + * one-shot mode. This is because the timer will get reprogrammed again + * after next interrupt. + */ +void omap_32k_timer_reprogram(unsigned long next_tick) +{ + omap_32k_timer_start(JIFFIES_TO_HW_TICKS(next_tick, 32768) + 1); +} + +static struct irqaction omap_32k_timer_irq; +extern struct timer_update_handler timer_update; + +static int omap_32k_timer_enable_dyn_tick(void) +{ + /* No need to reprogram timer, just use the next interrupt */ + return 0; +} + +static int omap_32k_timer_disable_dyn_tick(void) +{ + omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD); + return 0; +} + +static struct dyn_tick_timer omap_dyn_tick_timer = { + .enable = omap_32k_timer_enable_dyn_tick, + .disable = omap_32k_timer_disable_dyn_tick, + .reprogram = omap_32k_timer_reprogram, + .handler = omap_32k_timer_interrupt, +}; +#endif /* CONFIG_NO_IDLE_HZ */ + static struct irqaction omap_32k_timer_irq = { .name = "32KHz timer", - .flags = SA_INTERRUPT, - .handler = omap_32k_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = omap_32k_timer_interrupt, }; static __init void omap_init_32k_timer(void) { + +#ifdef CONFIG_NO_IDLE_HZ + omap_timer.dyn_tick = &omap_dyn_tick_timer; +#endif + setup_irq(INT_OS_TIMER, &omap_32k_timer_irq); omap_timer.offset = omap_32k_timer_gettimeoffset; omap_32k_last_tick = omap_32k_sync_timer_read(); diff --git a/arch/arm/mach-omap/usb.c b/arch/arm/mach-omap/usb.c index 6e805d4..7f37857 100644 --- a/arch/arm/mach-omap/usb.c +++ b/arch/arm/mach-omap/usb.c @@ -288,8 +288,8 @@ static void usb_release(struct device *dev) static struct resource udc_resources[] = { /* order is significant! */ { /* registers */ - .start = IO_ADDRESS(UDC_BASE), - .end = IO_ADDRESS(UDC_BASE + 0xff), + .start = UDC_BASE, + .end = UDC_BASE + 0xff, .flags = IORESOURCE_MEM, }, { /* general IRQ */ .start = IH2_BASE + 20, @@ -355,8 +355,8 @@ static struct platform_device ohci_device = { static struct resource otg_resources[] = { /* order is significant! */ { - .start = IO_ADDRESS(OTG_BASE), - .end = IO_ADDRESS(OTG_BASE + 0xff), + .start = OTG_BASE, + .end = OTG_BASE + 0xff, .flags = IORESOURCE_MEM, }, { .start = IH2_BASE + 8, diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index 473fb61..6e52021 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -105,8 +105,8 @@ pxa_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction pxa_timer_irq = { .name = "PXA Timer Tick", - .flags = SA_INTERRUPT, - .handler = pxa_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = pxa_timer_interrupt, }; static void __init pxa_timer_init(void) diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index 534df0c..d4d03d0 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -154,6 +154,11 @@ config S3C2410_PM_CHECK_CHUNKSIZE the CRC data block will take more memory, but wil identify any faults with better precision. +config PM_SIMTEC + bool + depends on PM && (ARCH_BAST || MACH_VR1000) + default y + config S3C2410_LOWLEVEL_UART_PORT int "S3C2410 UART to use for low-level messages" default 0 diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 7c379aa..f99b689 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_S3C2410_DMA) += dma.o # Power Management support obj-$(CONFIG_PM) += pm.o sleep.o +obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o # S3C2440 support diff --git a/arch/arm/mach-s3c2410/devs.c b/arch/arm/mach-s3c2410/devs.c index 64792f6..4664bd1 100644 --- a/arch/arm/mach-s3c2410/devs.c +++ b/arch/arm/mach-s3c2410/devs.c @@ -96,8 +96,8 @@ struct platform_device s3c_device_lcd = { .num_resources = ARRAY_SIZE(s3c_lcd_resource), .resource = s3c_lcd_resource, .dev = { - .dma_mask = &s3c_device_lcd_dmamask, - .coherent_dma_mask = 0xffffffffUL + .dma_mask = &s3c_device_lcd_dmamask, + .coherent_dma_mask = 0xffffffffUL } }; diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c index b668c48..cf9f46d 100644 --- a/arch/arm/mach-s3c2410/irq.c +++ b/arch/arm/mach-s3c2410/irq.c @@ -40,8 +40,11 @@ * 04-Nov-2004 Ben Dooks * Fix standard IRQ wake for EINT0..4 and RTC * - * 22-Feb-2004 Ben Dooks + * 22-Feb-2005 Ben Dooks * Fixed edge-triggering on ADC IRQ + * + * 28-Jun-2005 Ben Dooks + * Mark IRQ_LCD valid */ #include <linux/init.h> @@ -366,7 +369,6 @@ static struct irqchip s3c_irq_eint0t4 = { #define INTMSK_UART1 (1UL << (IRQ_UART1 - IRQ_EINT0)) #define INTMSK_UART2 (1UL << (IRQ_UART2 - IRQ_EINT0)) #define INTMSK_ADCPARENT (1UL << (IRQ_ADCPARENT - IRQ_EINT0)) -#define INTMSK_LCD (1UL << (IRQ_LCD - IRQ_EINT0)) static inline void s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit, @@ -716,7 +718,6 @@ void __init s3c24xx_init_irq(void) case IRQ_UART0: case IRQ_UART1: case IRQ_UART2: - case IRQ_LCD: case IRQ_ADCPARENT: set_irq_chip(irqno, &s3c_irq_level_chip); set_irq_handler(irqno, do_level_IRQ); diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index f3e9700..549bcb1 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -27,6 +27,7 @@ * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA * 14-Mar-2006 BJD Updated for __iomem changes * 22-Jun-2006 BJD Added DM9000 platform information + * 28-Jun-2006 BJD Moved pm functionality out to common code */ #include <linux/kernel.h> @@ -67,7 +68,6 @@ #include "devs.h" #include "cpu.h" #include "usb-simtec.h" -#include "pm.h" #define COPYRIGHT ", (c) 2004-2005 Simtec Electronics" @@ -405,44 +405,13 @@ void __init bast_map_io(void) usb_simtec_init(); } -void __init bast_init_irq(void) -{ - s3c24xx_init_irq(); -} - -#ifdef CONFIG_PM - -/* bast_init_machine - * - * enable the power management functions for the EB2410ITX -*/ - -static __init void bast_init_machine(void) -{ - unsigned long gstatus4; - - printk(KERN_INFO "BAST Power Manangement" COPYRIGHT "\n"); - - gstatus4 = (__raw_readl(S3C2410_BANKCON7) & 0x3) << 30; - gstatus4 |= (__raw_readl(S3C2410_BANKCON6) & 0x3) << 28; - gstatus4 |= (__raw_readl(S3C2410_BANKSIZE) & S3C2410_BANKSIZE_MASK); - - __raw_writel(gstatus4, S3C2410_GSTATUS4); - - s3c2410_pm_init(); -} - -#else -#define bast_init_machine NULL -#endif - MACHINE_START(BAST, "Simtec-BAST") MAINTAINER("Ben Dooks <ben@simtec.co.uk>") BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART) BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100) - MAPIO(bast_map_io) - INITIRQ(bast_init_irq) - .init_machine = bast_init_machine, + + .map_io = bast_map_io, + .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index 76be074..1db2855 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -371,16 +371,12 @@ void __init vr1000_map_io(void) usb_simtec_init(); } -void __init vr1000_init_irq(void) -{ - s3c24xx_init_irq(); -} MACHINE_START(VR1000, "Thorcom-VR1000") MAINTAINER("Ben Dooks <ben@simtec.co.uk>") BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART) BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100) - MAPIO(vr1000_map_io) - INITIRQ(vr1000_init_irq) + .map_io = vr1000_map_io, + .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, MACHINE_END diff --git a/arch/arm/mach-s3c2410/pm-simtec.c b/arch/arm/mach-s3c2410/pm-simtec.c new file mode 100644 index 0000000..2cb7988 --- /dev/null +++ b/arch/arm/mach-s3c2410/pm-simtec.c @@ -0,0 +1,65 @@ +/* linux/arch/arm/mach-s3c2410/pm-simtec.c + * + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * http://armlinux.simtec.co.uk/ + * + * Power Management helpers for Simtec S3C24XX implementations + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/device.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <asm/hardware.h> +#include <asm/io.h> + +#include <asm/arch/map.h> +#include <asm/arch/regs-serial.h> +#include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-mem.h> + +#include <asm/mach-types.h> + +#include "pm.h" + +#define COPYRIGHT ", (c) 2005 Simtec Electronics" + +/* pm_simtec_init + * + * enable the power management functions +*/ + +static __init int pm_simtec_init(void) +{ + unsigned long gstatus4; + + /* check which machine we are running on */ + + if (!machine_is_bast() && !machine_is_vr1000()) + return 0; + + printk(KERN_INFO "Simtec Board Power Manangement" COPYRIGHT "\n"); + + gstatus4 = (__raw_readl(S3C2410_BANKCON7) & 0x3) << 30; + gstatus4 |= (__raw_readl(S3C2410_BANKCON6) & 0x3) << 28; + gstatus4 |= (__raw_readl(S3C2410_BANKSIZE) & S3C2410_BANKSIZE_MASK); + + __raw_writel(gstatus4, S3C2410_GSTATUS4); + + return s3c2410_pm_init(); +} + +arch_initcall(pm_simtec_init); diff --git a/arch/arm/mach-s3c2410/time.c b/arch/arm/mach-s3c2410/time.c index 179f0e0..765a3a9 100644 --- a/arch/arm/mach-s3c2410/time.c +++ b/arch/arm/mach-s3c2410/time.c @@ -137,8 +137,8 @@ s3c2410_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction s3c2410_timer_irq = { .name = "S3C2410 Timer Tick", - .flags = SA_INTERRUPT, - .handler = s3c2410_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = s3c2410_timer_interrupt, }; /* diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c index 84c8654..65dbe99 100644 --- a/arch/arm/mach-sa1100/h3600.c +++ b/arch/arm/mach-sa1100/h3600.c @@ -727,7 +727,7 @@ static void h3800_IRQ_demux(unsigned int irq, struct irqdesc *desc, struct pt_re static struct irqaction h3800_irq = { .name = "h3800_asic", .handler = h3800_IRQ_demux, - .flags = SA_INTERRUPT, + .flags = SA_INTERRUPT | SA_TIMER, }; u32 kpio_int_shadow = 0; diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c index 19b0c0f..0eeb361 100644 --- a/arch/arm/mach-sa1100/time.c +++ b/arch/arm/mach-sa1100/time.c @@ -99,8 +99,8 @@ sa1100_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction sa1100_timer_irq = { .name = "SA11xx Timer Tick", - .flags = SA_INTERRUPT, - .handler = sa1100_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = sa1100_timer_interrupt, }; static void __init sa1100_timer_init(void) diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c index a9bc5d0..aa0e2f6 100644 --- a/arch/arm/mach-shark/core.c +++ b/arch/arm/mach-shark/core.c @@ -84,8 +84,8 @@ shark_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction shark_timer_irq = { .name = "Shark Timer Tick", - .flags = SA_INTERRUPT, - .handler = shark_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = shark_timer_interrupt, }; /* diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 6a7cbea..f01c0f8 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -33,6 +33,7 @@ #include <asm/mach-types.h> #include <asm/hardware/amba.h> #include <asm/hardware/amba_clcd.h> +#include <asm/hardware/arm_timer.h> #include <asm/hardware/icst307.h> #include <asm/mach/arch.h> @@ -788,38 +789,25 @@ void __init versatile_init(void) */ #define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10) #if TIMER_INTERVAL >= 0x100000 -#define TIMER_RELOAD (TIMER_INTERVAL >> 8) /* Divide by 256 */ -#define TIMER_CTRL 0x88 /* Enable, Clock / 256 */ +#define TIMER_RELOAD (TIMER_INTERVAL >> 8) +#define TIMER_DIVISOR (TIMER_CTRL_DIV256) #define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC) #elif TIMER_INTERVAL >= 0x10000 #define TIMER_RELOAD (TIMER_INTERVAL >> 4) /* Divide by 16 */ -#define TIMER_CTRL 0x84 /* Enable, Clock / 16 */ +#define TIMER_DIVISOR (TIMER_CTRL_DIV16) #define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC) #else #define TIMER_RELOAD (TIMER_INTERVAL) -#define TIMER_CTRL 0x80 /* Enable */ +#define TIMER_DIVISOR (TIMER_CTRL_DIV1) #define TICKS2USECS(x) ((x) / TICKS_PER_uSEC) #endif -#define TIMER_CTRL_IE (1 << 5) /* Interrupt Enable */ - -/* - * What does it look like? - */ -typedef struct TimerStruct { - unsigned long TimerLoad; - unsigned long TimerValue; - unsigned long TimerControl; - unsigned long TimerClear; -} TimerStruct_t; - /* * Returns number of ms since last clock interrupt. Note that interrupts * will have been disabled by do_gettimeoffset() */ static unsigned long versatile_gettimeoffset(void) { - volatile TimerStruct_t *timer0 = (TimerStruct_t *)TIMER0_VA_BASE; unsigned long ticks1, ticks2, status; /* @@ -828,11 +816,11 @@ static unsigned long versatile_gettimeoffset(void) * an interrupt. We get around this by ensuring that the * counter has not reloaded between our two reads. */ - ticks2 = timer0->TimerValue & 0xffff; + ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff; do { ticks1 = ticks2; status = __raw_readl(VA_IC_BASE + VIC_IRQ_RAW_STATUS); - ticks2 = timer0->TimerValue & 0xffff; + ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff; } while (ticks2 > ticks1); /* @@ -859,12 +847,10 @@ static unsigned long versatile_gettimeoffset(void) */ static irqreturn_t versatile_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) { - volatile TimerStruct_t *timer0 = (volatile TimerStruct_t *)TIMER0_VA_BASE; - write_seqlock(&xtime_lock); // ...clear the interrupt - timer0->TimerClear = 1; + writel(1, TIMER0_VA_BASE + TIMER_INTCLR); timer_tick(regs); @@ -875,8 +861,8 @@ static irqreturn_t versatile_timer_interrupt(int irq, void *dev_id, struct pt_re static struct irqaction versatile_timer_irq = { .name = "Versatile Timer Tick", - .flags = SA_INTERRUPT, - .handler = versatile_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = versatile_timer_interrupt, }; /* @@ -884,31 +870,32 @@ static struct irqaction versatile_timer_irq = { */ static void __init versatile_timer_init(void) { - volatile TimerStruct_t *timer0 = (volatile TimerStruct_t *)TIMER0_VA_BASE; - volatile TimerStruct_t *timer1 = (volatile TimerStruct_t *)TIMER1_VA_BASE; - volatile TimerStruct_t *timer2 = (volatile TimerStruct_t *)TIMER2_VA_BASE; - volatile TimerStruct_t *timer3 = (volatile TimerStruct_t *)TIMER3_VA_BASE; + u32 val; /* * set clock frequency: * VERSATILE_REFCLK is 32KHz * VERSATILE_TIMCLK is 1MHz */ - *(volatile unsigned int *)IO_ADDRESS(VERSATILE_SCTL_BASE) |= - ((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) | (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) | - (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) | (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel)); + val = readl(IO_ADDRESS(VERSATILE_SCTL_BASE)); + writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) | + (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) | + (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) | + (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val, + IO_ADDRESS(VERSATILE_SCTL_BASE)); /* * Initialise to a known state (all timers off) */ - timer0->TimerControl = 0; - timer1->TimerControl = 0; - timer2->TimerControl = 0; - timer3->TimerControl = 0; - - timer0->TimerLoad = TIMER_RELOAD; - timer0->TimerValue = TIMER_RELOAD; - timer0->TimerControl = TIMER_CTRL | 0x40 | TIMER_CTRL_IE; /* periodic + IE */ + writel(0, TIMER0_VA_BASE + TIMER_CTRL); + writel(0, TIMER1_VA_BASE + TIMER_CTRL); + writel(0, TIMER2_VA_BASE + TIMER_CTRL); + writel(0, TIMER3_VA_BASE + TIMER_CTRL); + + writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD); + writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_VALUE); + writel(TIMER_DIVISOR | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC | + TIMER_CTRL_IE, TIMER0_VA_BASE + TIMER_CTRL); /* * Make irqs happen for the system timer diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index c08710b..edffa47 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -437,7 +437,7 @@ void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc) memtable_init(mi); if (mdesc->map_io) mdesc->map_io(); - flush_tlb_all(); + local_flush_tlb_all(); /* * initialise the zones within each node @@ -522,6 +522,69 @@ static inline void free_area(unsigned long addr, unsigned long end, char *s) printk(KERN_INFO "Freeing %s memory: %dK\n", s, size); } +static inline void +free_memmap(int node, unsigned long start_pfn, unsigned long end_pfn) +{ + struct page *start_pg, *end_pg; + unsigned long pg, pgend; + + /* + * Convert start_pfn/end_pfn to a struct page pointer. + */ + start_pg = pfn_to_page(start_pfn); + end_pg = pfn_to_page(end_pfn); + + /* + * Convert to physical addresses, and + * round start upwards and end downwards. + */ + pg = PAGE_ALIGN(__pa(start_pg)); + pgend = __pa(end_pg) & PAGE_MASK; + + /* + * If there are free pages between these, + * free the section of the memmap array. + */ + if (pg < pgend) + free_bootmem_node(NODE_DATA(node), pg, pgend - pg); +} + +/* + * The mem_map array can get very big. Free the unused area of the memory map. + */ +static void __init free_unused_memmap_node(int node, struct meminfo *mi) +{ + unsigned long bank_start, prev_bank_end = 0; + unsigned int i; + + /* + * [FIXME] This relies on each bank being in address order. This + * may not be the case, especially if the user has provided the + * information on the command line. + */ + for (i = 0; i < mi->nr_banks; i++) { + if (mi->bank[i].size == 0 || mi->bank[i].node != node) + continue; + + bank_start = mi->bank[i].start >> PAGE_SHIFT; + if (bank_start < prev_bank_end) { + printk(KERN_ERR "MEM: unordered memory banks. " + "Not freeing memmap.\n"); + break; + } + + /* + * If we had a previous bank, and there is a space + * between the current bank and the previous, free it. + */ + if (prev_bank_end && prev_bank_end != bank_start) + free_memmap(node, prev_bank_end, bank_start); + + prev_bank_end = (mi->bank[i].start + + mi->bank[i].size) >> PAGE_SHIFT; + } +} + /* * mem_init() marks the free areas in the mem_map and tells us how much * memory is free. This is done after various parts of the system have @@ -540,16 +603,12 @@ void __init mem_init(void) max_mapnr = virt_to_page(high_memory) - mem_map; #endif - /* - * We may have non-contiguous memory. - */ - if (meminfo.nr_banks != 1) - create_memmap_holes(&meminfo); - /* this will put all unused low memory onto the freelists */ for_each_online_node(node) { pg_data_t *pgdat = NODE_DATA(node); + free_unused_memmap_node(node, &meminfo); + if (pgdat->node_spanned_pages != 0) totalram_pages += free_all_bootmem_node(pgdat); } diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c index 2c2b93d..c3bd503 100644 --- a/arch/arm/mm/mm-armv.c +++ b/arch/arm/mm/mm-armv.c @@ -169,7 +169,14 @@ pgd_t *get_pgd_slow(struct mm_struct *mm) memzero(new_pgd, FIRST_KERNEL_PGD_NR * sizeof(pgd_t)); + /* + * Copy over the kernel and IO PGD entries + */ init_pgd = pgd_offset_k(0); + memcpy(new_pgd + FIRST_KERNEL_PGD_NR, init_pgd + FIRST_KERNEL_PGD_NR, + (PTRS_PER_PGD - FIRST_KERNEL_PGD_NR) * sizeof(pgd_t)); + + clean_dcache_area(new_pgd, PTRS_PER_PGD * sizeof(pgd_t)); if (!vectors_high()) { /* @@ -198,14 +205,6 @@ pgd_t *get_pgd_slow(struct mm_struct *mm) spin_unlock(&mm->page_table_lock); } - /* - * Copy over the kernel and IO PGD entries - */ - memcpy(new_pgd + FIRST_KERNEL_PGD_NR, init_pgd + FIRST_KERNEL_PGD_NR, - (PTRS_PER_PGD - FIRST_KERNEL_PGD_NR) * sizeof(pgd_t)); - - clean_dcache_area(new_pgd, PTRS_PER_PGD * sizeof(pgd_t)); - return new_pgd; no_pte: @@ -683,7 +682,7 @@ void __init memtable_init(struct meminfo *mi) } flush_cache_all(); - flush_tlb_all(); + local_flush_tlb_all(); top_pmd = pmd_off_k(0xffff0000); } @@ -698,75 +697,3 @@ void __init iotable_init(struct map_desc *io_desc, int nr) for (i = 0; i < nr; i++) create_mapping(io_desc + i); } - -static inline void -free_memmap(int node, unsigned long start_pfn, unsigned long end_pfn) -{ - struct page *start_pg, *end_pg; - unsigned long pg, pgend; - - /* - * Convert start_pfn/end_pfn to a struct page pointer. - */ - start_pg = pfn_to_page(start_pfn); - end_pg = pfn_to_page(end_pfn); - - /* - * Convert to physical addresses, and - * round start upwards and end downwards. - */ - pg = PAGE_ALIGN(__pa(start_pg)); - pgend = __pa(end_pg) & PAGE_MASK; - - /* - * If there are free pages between these, - * free the section of the memmap array. - */ - if (pg < pgend) - free_bootmem_node(NODE_DATA(node), pg, pgend - pg); -} - -static inline void free_unused_memmap_node(int node, struct meminfo *mi) -{ - unsigned long bank_start, prev_bank_end = 0; - unsigned int i; - - /* - * [FIXME] This relies on each bank being in address order. This - * may not be the case, especially if the user has provided the - * information on the command line. - */ - for (i = 0; i < mi->nr_banks; i++) { - if (mi->bank[i].size == 0 || mi->bank[i].node != node) - continue; - - bank_start = mi->bank[i].start >> PAGE_SHIFT; - if (bank_start < prev_bank_end) { - printk(KERN_ERR "MEM: unordered memory banks. " - "Not freeing memmap.\n"); - break; - } - - /* - * If we had a previous bank, and there is a space - * between the current bank and the previous, free it. - */ - if (prev_bank_end && prev_bank_end != bank_start) - free_memmap(node, prev_bank_end, bank_start); - - prev_bank_end = PAGE_ALIGN(mi->bank[i].start + - mi->bank[i].size) >> PAGE_SHIFT; - } -} - -/* - * The mem_map array can get very big. Free - * the unused area of the memory map. - */ -void __init create_memmap_holes(struct meminfo *mi) -{ - int node; - - for_each_online_node(node) - free_unused_memmap_node(node, mi); -} diff --git a/arch/arm/oprofile/Makefile b/arch/arm/oprofile/Makefile index ba1a6e9..8ffb523 100644 --- a/arch/arm/oprofile/Makefile +++ b/arch/arm/oprofile/Makefile @@ -6,6 +6,6 @@ DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \ oprofilefs.o oprofile_stats.o \ timer_int.o ) -oprofile-y := $(DRIVER_OBJS) init.o +oprofile-y := $(DRIVER_OBJS) init.o backtrace.o oprofile-$(CONFIG_CPU_XSCALE) += common.o op_model_xscale.o diff --git a/arch/arm/oprofile/backtrace.c b/arch/arm/oprofile/backtrace.c new file mode 100644 index 0000000..ec58d3e --- /dev/null +++ b/arch/arm/oprofile/backtrace.c @@ -0,0 +1,144 @@ +/* + * Arm specific backtracing code for oprofile + * + * Copyright 2005 Openedhand Ltd. + * + * Author: Richard Purdie <rpurdie@openedhand.com> + * + * Based on i386 oprofile backtrace code by John Levon, David Smith + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/oprofile.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <asm/ptrace.h> +#include <asm/uaccess.h> + + +/* + * The registers we're interested in are at the end of the variable + * length saved register structure. The fp points at the end of this + * structure so the address of this struct is: + * (struct frame_tail *)(xxx->fp)-1 + */ +struct frame_tail { + struct frame_tail *fp; + unsigned long sp; + unsigned long lr; +} __attribute__((packed)); + + +#ifdef CONFIG_FRAME_POINTER +static struct frame_tail* kernel_backtrace(struct frame_tail *tail) +{ + oprofile_add_trace(tail->lr); + + /* frame pointers should strictly progress back up the stack + * (towards higher addresses) */ + if (tail >= tail->fp) + return NULL; + + return tail->fp-1; +} +#endif + +static struct frame_tail* user_backtrace(struct frame_tail *tail) +{ + struct frame_tail buftail; + + /* hardware pte might not be valid due to dirty/accessed bit emulation + * so we use copy_from_user and benefit from exception fixups */ + if (copy_from_user(&buftail, tail, sizeof(struct frame_tail))) + return NULL; + + oprofile_add_trace(buftail.lr); + + /* frame pointers should strictly progress back up the stack + * (towards higher addresses) */ + if (tail >= buftail.fp) + return NULL; + + return buftail.fp-1; +} + +/* Compare two addresses and see if they're on the same page */ +#define CMP_ADDR_EQUAL(x,y,offset) ((((unsigned long) x) >> PAGE_SHIFT) \ + == ((((unsigned long) y) + offset) >> PAGE_SHIFT)) + +/* check that the page(s) containing the frame tail are present */ +static int pages_present(struct frame_tail *tail) +{ + struct mm_struct * mm = current->mm; + + if (!check_user_page_readable(mm, (unsigned long)tail)) + return 0; + + if (CMP_ADDR_EQUAL(tail, tail, 8)) + return 1; + + if (!check_user_page_readable(mm, ((unsigned long)tail) + 8)) + return 0; + + return 1; +} + +/* + * | | /\ Higher addresses + * | | + * --------------- stack base (address of current_thread_info) + * | thread info | + * . . + * | stack | + * --------------- saved regs->ARM_fp value if valid (frame_tail address) + * . . + * --------------- struct pt_regs stored on stack (struct pt_regs *) + * | | + * . . + * | | + * --------------- %esp + * | | + * | | \/ Lower addresses + * + * Thus, &pt_regs <-> stack base restricts the valid(ish) fp values + */ +static int valid_kernel_stack(struct frame_tail *tail, struct pt_regs *regs) +{ + unsigned long tailaddr = (unsigned long)tail; + unsigned long stack = (unsigned long)regs; + unsigned long stack_base = (stack & ~(THREAD_SIZE - 1)) + THREAD_SIZE; + + return (tailaddr > stack) && (tailaddr < stack_base); +} + +void arm_backtrace(struct pt_regs const *regs, unsigned int depth) +{ + struct frame_tail *tail; + unsigned long last_address = 0; + + tail = ((struct frame_tail *) regs->ARM_fp) - 1; + + if (!user_mode(regs)) { + +#ifdef CONFIG_FRAME_POINTER + while (depth-- && tail && valid_kernel_stack(tail, regs)) { + tail = kernel_backtrace(tail); + } +#endif + return; + } + + while (depth-- && tail && !((unsigned long) tail & 3)) { + if ((!CMP_ADDR_EQUAL(last_address, tail, 0) + || !CMP_ADDR_EQUAL(last_address, tail, 8)) + && !pages_present(tail)) + return; + last_address = (unsigned long) tail; + tail = user_backtrace(tail); + } +} + diff --git a/arch/arm/oprofile/init.c b/arch/arm/oprofile/init.c index cce3d30..d315a3a 100644 --- a/arch/arm/oprofile/init.c +++ b/arch/arm/oprofile/init.c @@ -20,6 +20,8 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) ret = pmu_init(ops, &op_xscale_spec); #endif + ops->backtrace = arm_backtrace; + return ret; } diff --git a/arch/arm/oprofile/op_arm_model.h b/arch/arm/oprofile/op_arm_model.h index 2d4caf4..2148d07 100644 --- a/arch/arm/oprofile/op_arm_model.h +++ b/arch/arm/oprofile/op_arm_model.h @@ -24,6 +24,8 @@ struct op_arm_model_spec { extern struct op_arm_model_spec op_xscale_spec; #endif +extern void arm_backtrace(struct pt_regs * const regs, unsigned int depth); + extern int __init pmu_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec); extern void pmu_exit(void); #endif /* OP_ARM_MODEL_H */ diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 30c1dfb..6d3a79e 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -6,7 +6,7 @@ # To add an entry into this database, please see Documentation/arm/README, # or contact rmk@arm.linux.org.uk # -# Last update: Thu Mar 24 14:34:50 2005 +# Last update: Thu Jun 23 20:19:33 2005 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -243,7 +243,7 @@ yoho ARCH_YOHO YOHO 231 jasper ARCH_JASPER JASPER 232 dsc25 ARCH_DSC25 DSC25 233 omap_innovator MACH_OMAP_INNOVATOR OMAP_INNOVATOR 234 -ramses ARCH_RAMSES RAMSES 235 +mnci ARCH_RAMSES RAMSES 235 s28x ARCH_S28X S28X 236 mport3 ARCH_MPORT3 MPORT3 237 pxa_eagle250 ARCH_PXA_EAGLE250 PXA_EAGLE250 238 @@ -323,7 +323,7 @@ nimbra29x ARCH_NIMBRA29X NIMBRA29X 311 nimbra210 ARCH_NIMBRA210 NIMBRA210 312 hhp_d95xx ARCH_HHP_D95XX HHP_D95XX 313 labarm ARCH_LABARM LABARM 314 -m825xx ARCH_M825XX M825XX 315 +comcerto ARCH_M825XX M825XX 315 m7100 SA1100_M7100 M7100 316 nipc2 ARCH_NIPC2 NIPC2 317 fu7202 ARCH_FU7202 FU7202 318 @@ -724,3 +724,66 @@ lpc22xx MACH_LPC22XX LPC22XX 715 omap_comet3 MACH_COMET3 COMET3 716 omap_comet4 MACH_COMET4 COMET4 717 csb625 MACH_CSB625 CSB625 718 +fortunet2 MACH_FORTUNET2 FORTUNET2 719 +s5h2200 MACH_S5H2200 S5H2200 720 +optorm920 MACH_OPTORM920 OPTORM920 721 +adsbitsyxb MACH_ADSBITSYXB ADSBITSYXB 722 +adssphere MACH_ADSSPHERE ADSSPHERE 723 +adsportal MACH_ADSPORTAL ADSPORTAL 724 +ln2410sbc MACH_LN2410SBC LN2410SBC 725 +cb3rufc MACH_CB3RUFC CB3RUFC 726 +mp2usb MACH_MP2USB MP2USB 727 +ntnp425c MACH_NTNP425C NTNP425C 728 +colibri MACH_COLIBRI COLIBRI 729 +pcm7220 MACH_PCM7220 PCM7220 730 +gateway7001 MACH_GATEWAY7001 GATEWAY7001 731 +pcm027 MACH_PCM027 PCM027 732 +cmpxa MACH_CMPXA CMPXA 733 +anubis MACH_ANUBIS ANUBIS 734 +ite8152 MACH_ITE8152 ITE8152 735 +lpc3xxx MACH_LPC3XXX LPC3XXX 736 +puppeteer MACH_PUPPETEER PUPPETEER 737 +vt001 MACH_MACH_VADATECH MACH_VADATECH 738 +e570 MACH_E570 E570 739 +x50 MACH_X50 X50 740 +recon MACH_RECON RECON 741 +xboardgp8 MACH_XBOARDGP8 XBOARDGP8 742 +fpic2 MACH_FPIC2 FPIC2 743 +akita MACH_AKITA AKITA 744 +a81 MACH_A81 A81 745 +svm_sc25x MACH_SVM_SC25X SVM_SC25X 746 +vt020 MACH_VADATECH020 VADATECH020 747 +tli MACH_TLI TLI 748 +edb9315lc MACH_EDB9315LC EDB9315LC 749 +passec MACH_PASSEC PASSEC 750 +ds_tiger MACH_DS_TIGER DS_TIGER 751 +e310 MACH_E310 E310 752 +e330 MACH_E330 E330 753 +rt3000 MACH_RT3000 RT3000 754 +nokia770 MACH_NOKIA770 NOKIA770 755 +pnx0106 MACH_PNX0106 PNX0106 756 +hx21xx MACH_HX21XX HX21XX 757 +faraday MACH_FARADAY FARADAY 758 +sbc9312 MACH_SBC9312 SBC9312 759 +batman MACH_BATMAN BATMAN 760 +jpd201 MACH_JPD201 JPD201 761 +mipsa MACH_MIPSA MIPSA 762 +kacom MACH_KACOM KACOM 763 +swarcocpu MACH_SWARCOCPU SWARCOCPU 764 +swarcodsl MACH_SWARCODSL SWARCODSL 765 +blueangel MACH_BLUEANGEL BLUEANGEL 766 +hairygrama MACH_HAIRYGRAMA HAIRYGRAMA 767 +banff MACH_BANFF BANFF 768 +carmeva MACH_CARMEVA CARMEVA 769 +sam255 MACH_SAM255 SAM255 770 +ppm10 MACH_PPM10 PPM10 771 +edb9315a MACH_EDB9315A EDB9315A 772 +sunset MACH_SUNSET SUNSET 773 +stargate2 MACH_STARGATE2 STARGATE2 774 +intelmote2 MACH_INTELMOTE2 INTELMOTE2 775 +trizeps4 MACH_TRIZEPS4 TRIZEPS4 776 +mainstone2 MACH_MAINSTONE2 MAINSTONE2 777 +ez_ixp42x MACH_EZ_IXP42X EZ_IXP42X 778 +tapwave_zodiac MACH_TAPWAVE_ZODIAC TAPWAVE_ZODIAC 779 +universalmeter MACH_UNIVERSALMETER UNIVERSALMETER 780 +hicoarm9 MACH_HICOARM9 HICOARM9 781 diff --git a/arch/arm/vfp/vfp.h b/arch/arm/vfp/vfp.h index 55a02bc..4b97950 100644 --- a/arch/arm/vfp/vfp.h +++ b/arch/arm/vfp/vfp.h @@ -117,7 +117,13 @@ static inline u64 vfp_estimate_div128to64(u64 nh, u64 nl, u64 m) if (nh >= m) return ~0ULL; mh = m >> 32; - z = (mh << 32 <= nh) ? 0xffffffff00000000ULL : (nh / mh) << 32; + if (mh << 32 <= nh) { + z = 0xffffffff00000000ULL; + } else { + z = nh; + do_div(z, mh); + z <<= 32; + } mul64to128(&termh, &terml, m, z); sub128(&remh, &reml, nh, nl, termh, terml); ml = m << 32; @@ -126,7 +132,12 @@ static inline u64 vfp_estimate_div128to64(u64 nh, u64 nl, u64 m) add128(&remh, &reml, remh, reml, mh, ml); } remh = (remh << 32) | (reml >> 32); - z |= (mh << 32 <= remh) ? 0xffffffff : remh / mh; + if (mh << 32 <= remh) { + z |= 0xffffffff; + } else { + do_div(remh, mh); + z |= remh; + } return z; } diff --git a/arch/arm/vfp/vfpdouble.c b/arch/arm/vfp/vfpdouble.c index fa3053e..b801cd6 100644 --- a/arch/arm/vfp/vfpdouble.c +++ b/arch/arm/vfp/vfpdouble.c @@ -32,6 +32,8 @@ */ #include <linux/kernel.h> #include <linux/bitops.h> + +#include <asm/div64.h> #include <asm/ptrace.h> #include <asm/vfp.h> diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 3aeedd2..22f3da4 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -89,7 +89,7 @@ void vfp_raise_sigfpe(unsigned int sicode, struct pt_regs *regs) current->thread.error_code = 0; current->thread.trap_no = 6; - force_sig_info(SIGFPE, &info, current); + send_sig_info(SIGFPE, &info, current); } static void vfp_panic(char *reason) diff --git a/arch/arm/vfp/vfpsingle.c b/arch/arm/vfp/vfpsingle.c index 6849fe3..14dd696 100644 --- a/arch/arm/vfp/vfpsingle.c +++ b/arch/arm/vfp/vfpsingle.c @@ -32,6 +32,8 @@ */ #include <linux/kernel.h> #include <linux/bitops.h> + +#include <asm/div64.h> #include <asm/ptrace.h> #include <asm/vfp.h> @@ -303,7 +305,11 @@ u32 vfp_estimate_sqrt_significand(u32 exponent, u32 significand) if (z <= a) return (s32)a >> 1; } - return (u32)(((u64)a << 31) / z) + (z >> 1); + { + u64 v = (u64)a << 31; + do_div(v, z); + return v + (z >> 1); + } } static u32 vfp_single_fsqrt(int sd, int unused, s32 m, u32 fpscr) @@ -1107,7 +1113,11 @@ static u32 vfp_single_fdiv(int sd, int sn, s32 m, u32 fpscr) vsn.significand >>= 1; vsd.exponent++; } - vsd.significand = ((u64)vsn.significand << 32) / vsm.significand; + { + u64 significand = (u64)vsn.significand << 32; + do_div(significand, vsm.significand); + vsd.significand = significand; + } if ((vsd.significand & 0x3f) == 0) vsd.significand |= ((u64)vsm.significand * vsd.significand != (u64)vsn.significand << 32); |