diff options
Diffstat (limited to 'arch/mn10300/kernel/mn10300-serial.h')
| -rw-r--r-- | arch/mn10300/kernel/mn10300-serial.h | 126 |
1 files changed, 126 insertions, 0 deletions
diff --git a/arch/mn10300/kernel/mn10300-serial.h b/arch/mn10300/kernel/mn10300-serial.h new file mode 100644 index 0000000..6796499 --- /dev/null +++ b/arch/mn10300/kernel/mn10300-serial.h @@ -0,0 +1,126 @@ +/* MN10300 On-chip serial port driver definitions + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _MN10300_SERIAL_H +#define _MN10300_SERIAL_H + +#ifndef __ASSEMBLY__ +#include <linux/serial_core.h> +#include <linux/termios.h> +#endif + +#include <asm/page.h> +#include <asm/serial-regs.h> + +#define NR_PORTS 3 /* should be set 3 or 9 or 16 */ + +#define MNSC_BUFFER_SIZE +(PAGE_SIZE / 2) + +/* intr_flags bits */ +#define MNSCx_RX_AVAIL 0x01 +#define MNSCx_RX_OVERF 0x02 +#define MNSCx_TX_SPACE 0x04 +#define MNSCx_TX_EMPTY 0x08 + +#ifndef __ASSEMBLY__ + +struct mn10300_serial_port { + char *rx_buffer; /* reception buffer base */ + unsigned rx_inp; /* pointer to rx input offset */ + unsigned rx_outp; /* pointer to rx output offset */ + u8 tx_xchar; /* high-priority XON/XOFF buffer */ + u8 tx_break; /* transmit break request */ + u8 intr_flags; /* interrupt flags */ + volatile u16 *rx_icr; /* Rx interrupt control register */ + volatile u16 *tx_icr; /* Tx interrupt control register */ + int rx_irq; /* reception IRQ */ + int tx_irq; /* transmission IRQ */ + int tm_irq; /* timer IRQ */ + + const char *name; /* name of serial port */ + const char *rx_name; /* Rx interrupt handler name of serial port */ + const char *tx_name; /* Tx interrupt handler name of serial port */ + const char *tm_name; /* Timer interrupt handler name */ + unsigned short type; /* type of serial port */ + unsigned char isconsole; /* T if it's a console */ + volatile void *_iobase; /* pointer to base of I/O control regs */ + volatile u16 *_control; /* control register pointer */ + volatile u8 *_status; /* status register pointer */ + volatile u8 *_intr; /* interrupt register pointer */ + volatile void *_rxb; /* receive buffer register pointer */ + volatile void *_txb; /* transmit buffer register pointer */ + volatile u16 *_tmicr; /* timer interrupt control register */ + volatile u8 *_tmxmd; /* baud rate timer mode register */ + volatile u16 *_tmxbr; /* baud rate timer base register */ + + /* this must come down here so that assembly can use BSET to access the + * above fields */ + struct uart_port uart; + + unsigned short rx_brk; /* current break reception status */ + u16 tx_cts; /* current CTS status */ + int gdbstub; /* preemptively stolen by GDB stub */ + + u8 clock_src; /* clock source */ +#define MNSCx_CLOCK_SRC_IOCLK 0 +#define MNSCx_CLOCK_SRC_IOBCLK 1 + + u8 div_timer; /* timer used as divisor */ +#define MNSCx_DIV_TIMER_16BIT 0 +#define MNSCx_DIV_TIMER_8BIT 1 + + u16 options; /* options */ +#define MNSCx_OPT_CTS 0x0001 + + unsigned long ioclk; /* base clock rate */ +}; + +#ifdef CONFIG_MN10300_TTYSM0 +extern struct mn10300_serial_port mn10300_serial_port_sif0; +#endif + +#ifdef CONFIG_MN10300_TTYSM1 +extern struct mn10300_serial_port mn10300_serial_port_sif1; +#endif + +#ifdef CONFIG_MN10300_TTYSM2 +extern struct mn10300_serial_port mn10300_serial_port_sif2; +#endif + +extern struct mn10300_serial_port *mn10300_serial_ports[]; + +struct mn10300_serial_int { + struct mn10300_serial_port *port; + asmlinkage void (*vdma)(void); +}; + +extern struct mn10300_serial_int mn10300_serial_int_tbl[]; + +extern asmlinkage void mn10300_serial_vdma_interrupt(void); +extern asmlinkage void mn10300_serial_vdma_rx_handler(void); +extern asmlinkage void mn10300_serial_vdma_tx_handler(void); + +#endif /* __ASSEMBLY__ */ + +#if defined(CONFIG_GDBSTUB_ON_TTYSM0) +#define SCgSTR SC0STR +#define SCgRXB SC0RXB +#define SCgRXIRQ SC0RXIRQ +#elif defined(CONFIG_GDBSTUB_ON_TTYSM1) +#define SCgSTR SC1STR +#define SCgRXB SC1RXB +#define SCgRXIRQ SC1RXIRQ +#elif defined(CONFIG_GDBSTUB_ON_TTYSM2) +#define SCgSTR SC2STR +#define SCgRXB SC2RXB +#define SCgRXIRQ SC2RXIRQ +#endif + +#endif /* _MN10300_SERIAL_H */ |