aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/radeon/radeon_connectors.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpu/drm/radeon/radeon_connectors.c')
-rw-r--r--drivers/gpu/drm/radeon/radeon_connectors.c84
1 files changed, 72 insertions, 12 deletions
diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index 9792d4f..05b8b2c 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -60,18 +60,20 @@ void radeon_connector_hotplug(struct drm_connector *connector)
radeon_hpd_set_polarity(rdev, radeon_connector->hpd.hpd);
- /* powering up/down the eDP panel generates hpd events which
- * can interfere with modesetting.
- */
- if (connector->connector_type == DRM_MODE_CONNECTOR_eDP)
+ /* if the connector is already off, don't turn it back on */
+ if (connector->dpms != DRM_MODE_DPMS_ON)
return;
- /* pre-r600 did not always have the hpd pins mapped accurately to connectors */
- if (rdev->family >= CHIP_R600) {
- if (radeon_hpd_sense(rdev, radeon_connector->hpd.hpd))
- drm_helper_connector_dpms(connector, DRM_MODE_DPMS_ON);
- else
+ /* just deal with DP (not eDP) here. */
+ if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort) {
+ int saved_dpms = connector->dpms;
+
+ /* Only turn off the display it it's physically disconnected */
+ if (!radeon_hpd_sense(rdev, radeon_connector->hpd.hpd))
drm_helper_connector_dpms(connector, DRM_MODE_DPMS_OFF);
+ else if (radeon_dp_needs_link_train(radeon_connector))
+ drm_helper_connector_dpms(connector, DRM_MODE_DPMS_ON);
+ connector->dpms = saved_dpms;
}
}
@@ -430,6 +432,55 @@ int radeon_connector_set_property(struct drm_connector *connector, struct drm_pr
return 0;
}
+/*
+ * Some integrated ATI Radeon chipset implementations (e. g.
+ * Asus M2A-VM HDMI) may indicate the availability of a DDC,
+ * even when there's no monitor connected. For these connectors
+ * following DDC probe extension will be applied: check also for the
+ * availability of EDID with at least a correct EDID header. Only then,
+ * DDC is assumed to be available. This prevents drm_get_edid() and
+ * drm_edid_block_valid() from periodically dumping data and kernel
+ * errors into the logs and onto the terminal.
+ */
+static bool radeon_connector_needs_extended_probe(struct radeon_device *dev,
+ uint32_t supported_device,
+ int connector_type)
+{
+ /* Asus M2A-VM HDMI board sends data to i2c bus even,
+ * if HDMI add-on card is not plugged in or HDMI is disabled in
+ * BIOS. Valid DDC can only be assumed, if also a valid EDID header
+ * can be retrieved via i2c bus during DDC probe */
+ if ((dev->pdev->device == 0x791e) &&
+ (dev->pdev->subsystem_vendor == 0x1043) &&
+ (dev->pdev->subsystem_device == 0x826d)) {
+ if ((connector_type == DRM_MODE_CONNECTOR_HDMIA) &&
+ (supported_device == ATOM_DEVICE_DFP2_SUPPORT))
+ return true;
+ }
+ /* ECS A740GM-M with ATI RADEON 2100 sends data to i2c bus
+ * for a DVI connector that is not implemented */
+ if ((dev->pdev->device == 0x796e) &&
+ (dev->pdev->subsystem_vendor == 0x1019) &&
+ (dev->pdev->subsystem_device == 0x2615)) {
+ if ((connector_type == DRM_MODE_CONNECTOR_DVID) &&
+ (supported_device == ATOM_DEVICE_DFP2_SUPPORT))
+ return true;
+ }
+ /* TOSHIBA Satellite L300D with ATI Mobility Radeon x1100
+ * (RS690M) sends data to i2c bus for a HDMI connector that
+ * is not implemented */
+ if ((dev->pdev->device == 0x791f) &&
+ (dev->pdev->subsystem_vendor == 0x1179) &&
+ (dev->pdev->subsystem_device == 0xff68)) {
+ if ((connector_type == DRM_MODE_CONNECTOR_HDMIA) &&
+ (supported_device == ATOM_DEVICE_DFP2_SUPPORT))
+ return true;
+ }
+
+ /* Default: no EDID header probe required for DDC probing */
+ return false;
+}
+
static void radeon_fixup_lvds_native_mode(struct drm_encoder *encoder,
struct drm_connector *connector)
{
@@ -661,7 +712,8 @@ radeon_vga_detect(struct drm_connector *connector, bool force)
ret = connector_status_disconnected;
if (radeon_connector->ddc_bus)
- dret = radeon_ddc_probe(radeon_connector);
+ dret = radeon_ddc_probe(radeon_connector,
+ radeon_connector->requires_extended_probe);
if (dret) {
if (radeon_connector->edid) {
kfree(radeon_connector->edid);
@@ -833,7 +885,8 @@ radeon_dvi_detect(struct drm_connector *connector, bool force)
bool dret = false;
if (radeon_connector->ddc_bus)
- dret = radeon_ddc_probe(radeon_connector);
+ dret = radeon_ddc_probe(radeon_connector,
+ radeon_connector->requires_extended_probe);
if (dret) {
if (radeon_connector->edid) {
kfree(radeon_connector->edid);
@@ -1251,7 +1304,8 @@ radeon_dp_detect(struct drm_connector *connector, bool force)
if (radeon_dp_getdpcd(radeon_connector))
ret = connector_status_connected;
} else {
- if (radeon_ddc_probe(radeon_connector))
+ if (radeon_ddc_probe(radeon_connector,
+ radeon_connector->requires_extended_probe))
ret = connector_status_connected;
}
}
@@ -1406,6 +1460,9 @@ radeon_add_atom_connector(struct drm_device *dev,
radeon_connector->shared_ddc = shared_ddc;
radeon_connector->connector_object_id = connector_object_id;
radeon_connector->hpd = *hpd;
+ radeon_connector->requires_extended_probe =
+ radeon_connector_needs_extended_probe(rdev, supported_device,
+ connector_type);
radeon_connector->router = *router;
if (router->ddc_valid || router->cd_valid) {
radeon_connector->router_bus = radeon_i2c_lookup(rdev, &router->i2c_info);
@@ -1752,6 +1809,9 @@ radeon_add_legacy_connector(struct drm_device *dev,
radeon_connector->devices = supported_device;
radeon_connector->connector_object_id = connector_object_id;
radeon_connector->hpd = *hpd;
+ radeon_connector->requires_extended_probe =
+ radeon_connector_needs_extended_probe(rdev, supported_device,
+ connector_type);
switch (connector_type) {
case DRM_MODE_CONNECTOR_VGA:
drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type);