diff options
Diffstat (limited to 'drivers/infiniband/hw/ipath/ipath_init_chip.c')
| -rw-r--r-- | drivers/infiniband/hw/ipath/ipath_init_chip.c | 36 |
1 files changed, 22 insertions, 14 deletions
diff --git a/drivers/infiniband/hw/ipath/ipath_init_chip.c b/drivers/infiniband/hw/ipath/ipath_init_chip.c index 2823ff9..16f640e 100644 --- a/drivers/infiniband/hw/ipath/ipath_init_chip.c +++ b/drivers/infiniband/hw/ipath/ipath_init_chip.c @@ -53,13 +53,19 @@ MODULE_PARM_DESC(cfgports, "Set max number of ports to use"); /* * Number of buffers reserved for driver (layered drivers and SMA - * send). Reserved at end of buffer list. + * send). Reserved at end of buffer list. Initialized based on + * number of PIO buffers if not set via module interface. + * The problem with this is that it's global, but we'll use different + * numbers for different chip types. So the default value is not + * very useful. I've redefined it for the 1.3 release so that it's + * zero unless set by the user to something else, in which case we + * try to respect it. */ -static ushort ipath_kpiobufs = 32; +static ushort ipath_kpiobufs; static int ipath_set_kpiobufs(const char *val, struct kernel_param *kp); -module_param_call(kpiobufs, ipath_set_kpiobufs, param_get_uint, +module_param_call(kpiobufs, ipath_set_kpiobufs, param_get_ushort, &ipath_kpiobufs, S_IWUSR | S_IRUGO); MODULE_PARM_DESC(kpiobufs, "Set number of PIO buffers for driver"); @@ -531,8 +537,11 @@ static int init_housekeeping(struct ipath_devdata *dd, * Don't clear ipath_flags as 8bit mode was set before * entering this func. However, we do set the linkstate to * unknown, so we can watch for a transition. + * PRESENT is set because we want register reads to work, + * and the kernel infrastructure saw it in config space; + * We clear it if we have failures. */ - dd->ipath_flags |= IPATH_LINKUNK; + dd->ipath_flags |= IPATH_LINKUNK | IPATH_PRESENT; dd->ipath_flags &= ~(IPATH_LINKACTIVE | IPATH_LINKARMED | IPATH_LINKDOWN | IPATH_LINKINIT); @@ -560,6 +569,7 @@ static int init_housekeeping(struct ipath_devdata *dd, || (dd->ipath_uregbase & 0xffffffff) == 0xffffffff) { ipath_dev_err(dd, "Register read failures from chip, " "giving up initialization\n"); + dd->ipath_flags &= ~IPATH_PRESENT; ret = -ENODEV; goto done; } @@ -682,16 +692,14 @@ int ipath_init_chip(struct ipath_devdata *dd, int reinit) */ dd->ipath_pioavregs = ALIGN(val, sizeof(u64) * BITS_PER_BYTE / 2) / (sizeof(u64) * BITS_PER_BYTE / 2); - if (!ipath_kpiobufs) /* have to have at least 1, for SMA */ - kpiobufs = ipath_kpiobufs = 1; - else if ((dd->ipath_piobcnt2k + dd->ipath_piobcnt4k) < - (dd->ipath_cfgports * IPATH_MIN_USER_PORT_BUFCNT)) { - dev_info(&dd->pcidev->dev, "Too few PIO buffers (%u) " - "for %u ports to have %u each!\n", - dd->ipath_piobcnt2k + dd->ipath_piobcnt4k, - dd->ipath_cfgports, IPATH_MIN_USER_PORT_BUFCNT); - kpiobufs = 1; /* reserve just the minimum for SMA/ether */ - } else + if (ipath_kpiobufs == 0) { + /* not set by user, or set explictly to default */ + if ((dd->ipath_piobcnt2k + dd->ipath_piobcnt4k) > 128) + kpiobufs = 32; + else + kpiobufs = 16; + } + else kpiobufs = ipath_kpiobufs; if (kpiobufs > |