aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/isdn
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/isdn')
-rw-r--r--drivers/isdn/hardware/avm/avm_cs.c51
-rw-r--r--drivers/isdn/hisax/avma1_cs.c57
-rw-r--r--drivers/isdn/hisax/elsa_cs.c55
-rw-r--r--drivers/isdn/hisax/sedlbauer_cs.c84
-rw-r--r--drivers/isdn/hisax/teles_cs.c62
5 files changed, 0 insertions, 309 deletions
diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c
index b172361..91f06a3 100644
--- a/drivers/isdn/hardware/avm/avm_cs.c
+++ b/drivers/isdn/hardware/avm/avm_cs.c
@@ -38,38 +38,10 @@ MODULE_LICENSE("GPL");
/*====================================================================*/
-/*
- The event() function is this driver's Card Services event handler.
- It will be called by Card Services when an appropriate card status
- event is received. The config() and release() entry points are
- used to configure or release a socket, in response to card insertion
- and ejection events. They are invoked from the skeleton event
- handler.
-*/
-
static int avmcs_config(struct pcmcia_device *link);
static void avmcs_release(struct pcmcia_device *link);
-
-/*
- The attach() and detach() entry points are used to create and destroy
- "instances" of the driver, where each instance represents everything
- needed to manage one actual PCMCIA card.
-*/
-
static void avmcs_detach(struct pcmcia_device *p_dev);
-/*======================================================================
-
- avmcs_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
- The dev_link structure is initialized, but we don't actually
- configure the card at this point -- we wait until we receive a
- card insertion event.
-
-======================================================================*/
-
static int avmcs_probe(struct pcmcia_device *p_dev)
{
/* General socket configuration */
@@ -80,28 +52,12 @@ static int avmcs_probe(struct pcmcia_device *p_dev)
return avmcs_config(p_dev);
} /* avmcs_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
static void avmcs_detach(struct pcmcia_device *link)
{
avmcs_release(link);
} /* avmcs_detach */
-/*======================================================================
-
- avmcs_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- ethernet device available to the system.
-
-======================================================================*/
-
static int avmcs_configcheck(struct pcmcia_device *p_dev, void *priv_data)
{
p_dev->resource[0]->end = 16;
@@ -185,13 +141,6 @@ static int avmcs_config(struct pcmcia_device *link)
} /* avmcs_config */
-/*======================================================================
-
- After a card is removed, avmcs_release() will unregister the net
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
-======================================================================*/
static void avmcs_release(struct pcmcia_device *link)
{
diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c
index 62616c8..ac4dd78 100644
--- a/drivers/isdn/hisax/avma1_cs.c
+++ b/drivers/isdn/hisax/avma1_cs.c
@@ -39,39 +39,10 @@ module_param(isdnprot, int, 0);
/*====================================================================*/
-/*
- The event() function is this driver's Card Services event handler.
- It will be called by Card Services when an appropriate card status
- event is received. The config() and release() entry points are
- used to configure or release a socket, in response to card insertion
- and ejection events. They are invoked from the skeleton event
- handler.
-*/
-
static int avma1cs_config(struct pcmcia_device *link) __devinit ;
static void avma1cs_release(struct pcmcia_device *link);
-
-/*
- The attach() and detach() entry points are used to create and destroy
- "instances" of the driver, where each instance represents everything
- needed to manage one actual PCMCIA card.
-*/
-
static void avma1cs_detach(struct pcmcia_device *p_dev) __devexit ;
-
-/*======================================================================
-
- avma1cs_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
- The dev_link structure is initialized, but we don't actually
- configure the card at this point -- we wait until we receive a
- card insertion event.
-
-======================================================================*/
-
static int __devinit avma1cs_probe(struct pcmcia_device *p_dev)
{
dev_dbg(&p_dev->dev, "avma1cs_attach()\n");
@@ -84,15 +55,6 @@ static int __devinit avma1cs_probe(struct pcmcia_device *p_dev)
return avma1cs_config(p_dev);
} /* avma1cs_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void __devexit avma1cs_detach(struct pcmcia_device *link)
{
dev_dbg(&link->dev, "avma1cs_detach(0x%p)\n", link);
@@ -100,14 +62,6 @@ static void __devexit avma1cs_detach(struct pcmcia_device *link)
kfree(link->priv);
} /* avma1cs_detach */
-/*======================================================================
-
- avma1cs_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- ethernet device available to the system.
-
-======================================================================*/
-
static int avma1cs_configcheck(struct pcmcia_device *p_dev, void *priv_data)
{
p_dev->resource[0]->end = 16;
@@ -180,14 +134,6 @@ static int __devinit avma1cs_config(struct pcmcia_device *link)
return 0;
} /* avma1cs_config */
-/*======================================================================
-
- After a card is removed, avma1cs_release() will unregister the net
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
-======================================================================*/
-
static void avma1cs_release(struct pcmcia_device *link)
{
unsigned long minor = (unsigned long) link->priv;
@@ -200,7 +146,6 @@ static void avma1cs_release(struct pcmcia_device *link)
pcmcia_disable_device(link);
} /* avma1cs_release */
-
static struct pcmcia_device_id avma1cs_ids[] = {
PCMCIA_DEVICE_PROD_ID12("AVM", "ISDN A", 0x95d42008, 0xadc9d4bb),
PCMCIA_DEVICE_PROD_ID12("ISDN", "CARD", 0x8d9761c8, 0x01c5aa7b),
@@ -216,8 +161,6 @@ static struct pcmcia_driver avma1cs_driver = {
.id_table = avma1cs_ids,
};
-/*====================================================================*/
-
static int __init init_avma1_cs(void)
{
return pcmcia_register_driver(&avma1cs_driver);
diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c
index 2d439a7..496d477 100644
--- a/drivers/isdn/hisax/elsa_cs.c
+++ b/drivers/isdn/hisax/elsa_cs.c
@@ -63,26 +63,8 @@ MODULE_LICENSE("Dual MPL/GPL");
static int protocol = 2; /* EURO-ISDN Default */
module_param(protocol, int, 0);
-/*====================================================================*/
-
-/*
- The event() function is this driver's Card Services event handler.
- It will be called by Card Services when an appropriate card status
- event is received. The config() and release() entry points are
- used to configure or release a socket, in response to card insertion
- and ejection events. They are invoked from the elsa_cs event
- handler.
-*/
-
static int elsa_cs_config(struct pcmcia_device *link) __devinit ;
static void elsa_cs_release(struct pcmcia_device *link);
-
-/*
- The attach() and detach() entry points are used to create and destroy
- "instances" of the driver, where each instance represents everything
- needed to manage one actual PCMCIA card.
-*/
-
static void elsa_cs_detach(struct pcmcia_device *p_dev) __devexit;
typedef struct local_info_t {
@@ -91,18 +73,6 @@ typedef struct local_info_t {
int cardnr;
} local_info_t;
-/*======================================================================
-
- elsa_cs_attach() creates an "instance" of the driver, allocatingx
- local data structures for one device. The device is registered
- with Card Services.
-
- The dev_link structure is initialized, but we don't actually
- configure the card at this point -- we wait until we receive a
- card insertion event.
-
-======================================================================*/
-
static int __devinit elsa_cs_probe(struct pcmcia_device *link)
{
local_info_t *local;
@@ -121,15 +91,6 @@ static int __devinit elsa_cs_probe(struct pcmcia_device *link)
return elsa_cs_config(link);
} /* elsa_cs_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void __devexit elsa_cs_detach(struct pcmcia_device *link)
{
local_info_t *info = link->priv;
@@ -142,14 +103,6 @@ static void __devexit elsa_cs_detach(struct pcmcia_device *link)
kfree(info);
} /* elsa_cs_detach */
-/*======================================================================
-
- elsa_cs_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- device available to the system.
-
-======================================================================*/
-
static int elsa_cs_configcheck(struct pcmcia_device *p_dev, void *priv_data)
{
int j;
@@ -215,14 +168,6 @@ failed:
return -ENODEV;
} /* elsa_cs_config */
-/*======================================================================
-
- After a card is removed, elsa_cs_release() will unregister the net
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
-======================================================================*/
-
static void elsa_cs_release(struct pcmcia_device *link)
{
local_info_t *local = link->priv;
diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c
index 9e5c4fd..360204b 100644
--- a/drivers/isdn/hisax/sedlbauer_cs.c
+++ b/drivers/isdn/hisax/sedlbauer_cs.c
@@ -63,26 +63,9 @@ MODULE_LICENSE("Dual MPL/GPL");
static int protocol = 2; /* EURO-ISDN Default */
module_param(protocol, int, 0);
-/*====================================================================*/
-
-/*
- The event() function is this driver's Card Services event handler.
- It will be called by Card Services when an appropriate card status
- event is received. The config() and release() entry points are
- used to configure or release a socket, in response to card
- insertion and ejection events. They are invoked from the sedlbauer
- event handler.
-*/
-
static int sedlbauer_config(struct pcmcia_device *link) __devinit ;
static void sedlbauer_release(struct pcmcia_device *link);
-/*
- The attach() and detach() entry points are used to create and destroy
- "instances" of the driver, where each instance represents everything
- needed to manage one actual PCMCIA card.
-*/
-
static void sedlbauer_detach(struct pcmcia_device *p_dev) __devexit;
typedef struct local_info_t {
@@ -91,18 +74,6 @@ typedef struct local_info_t {
int cardnr;
} local_info_t;
-/*======================================================================
-
- sedlbauer_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
- The dev_link structure is initialized, but we don't actually
- configure the card at this point -- we wait until we receive a
- card insertion event.
-
-======================================================================*/
-
static int __devinit sedlbauer_probe(struct pcmcia_device *link)
{
local_info_t *local;
@@ -117,30 +88,9 @@ static int __devinit sedlbauer_probe(struct pcmcia_device *link)
local->p_dev = link;
link->priv = local;
- /*
- General socket configuration defaults can go here. In this
- client, we assume very little, and rely on the CIS for almost
- everything. In most clients, many details (i.e., number, sizes,
- and attributes of IO windows) are fixed by the nature of the
- device, and can be hard-wired here.
- */
-
- /* from old sedl_cs
- */
- /* The io structure describes IO port mapping */
-
return sedlbauer_config(link);
} /* sedlbauer_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void __devexit sedlbauer_detach(struct pcmcia_device *link)
{
dev_dbg(&link->dev, "sedlbauer_detach(0x%p)\n", link);
@@ -152,13 +102,6 @@ static void __devexit sedlbauer_detach(struct pcmcia_device *link)
kfree(link->priv);
} /* sedlbauer_detach */
-/*======================================================================
-
- sedlbauer_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- device available to the system.
-
-======================================================================*/
static int sedlbauer_config_check(struct pcmcia_device *p_dev, void *priv_data)
{
if (p_dev->config_index == 0)
@@ -168,8 +111,6 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev, void *priv_data)
return pcmcia_request_io(p_dev);
}
-
-
static int __devinit sedlbauer_config(struct pcmcia_device *link)
{
int ret;
@@ -180,27 +121,10 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link)
link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_CHECK_VCC |
CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO | CONF_AUTO_SET_IO;
- /*
- In this loop, we scan the CIS for configuration table entries,
- each of which describes a valid card configuration, including
- voltage, IO window, memory window, and interrupt settings.
-
- We make no assumptions about the card to be configured: we use
- just the information available in the CIS. In an ideal world,
- this would work for any PCMCIA card, but it requires a complete
- and accurate CIS. In practice, a driver usually "knows" most of
- these things without consulting the CIS, and most client drivers
- will only use the CIS to fill in implementation-defined details.
- */
ret = pcmcia_loop_config(link, sedlbauer_config_check, NULL);
if (ret)
goto failed;
- /*
- This actually configures the PCMCIA socket -- setting up
- the I/O windows and the interrupt mapping, and putting the
- card and host interface into "Memory and IO" mode.
- */
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
@@ -228,14 +152,6 @@ failed:
} /* sedlbauer_config */
-/*======================================================================
-
- After a card is removed, sedlbauer_release() will unregister the
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
-======================================================================*/
-
static void sedlbauer_release(struct pcmcia_device *link)
{
local_info_t *local = link->priv;
diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c
index 82f09b8..282a446 100644
--- a/drivers/isdn/hisax/teles_cs.c
+++ b/drivers/isdn/hisax/teles_cs.c
@@ -44,26 +44,8 @@ MODULE_LICENSE("GPL");
static int protocol = 2; /* EURO-ISDN Default */
module_param(protocol, int, 0);
-/*====================================================================*/
-
-/*
- The event() function is this driver's Card Services event handler.
- It will be called by Card Services when an appropriate card status
- event is received. The config() and release() entry points are
- used to configure or release a socket, in response to card insertion
- and ejection events. They are invoked from the teles_cs event
- handler.
-*/
-
static int teles_cs_config(struct pcmcia_device *link) __devinit ;
static void teles_cs_release(struct pcmcia_device *link);
-
-/*
- The attach() and detach() entry points are used to create and destroy
- "instances" of the driver, where each instance represents everything
- needed to manage one actual PCMCIA card.
-*/
-
static void teles_detach(struct pcmcia_device *p_dev) __devexit ;
typedef struct local_info_t {
@@ -72,18 +54,6 @@ typedef struct local_info_t {
int cardnr;
} local_info_t;
-/*======================================================================
-
- teles_attach() creates an "instance" of the driver, allocatingx
- local data structures for one device. The device is registered
- with Card Services.
-
- The dev_link structure is initialized, but we don't actually
- configure the card at this point -- we wait until we receive a
- card insertion event.
-
-======================================================================*/
-
static int __devinit teles_probe(struct pcmcia_device *link)
{
local_info_t *local;
@@ -98,27 +68,11 @@ static int __devinit teles_probe(struct pcmcia_device *link)
local->p_dev = link;
link->priv = local;
- /*
- General socket configuration defaults can go here. In this
- client, we assume very little, and rely on the CIS for almost
- everything. In most clients, many details (i.e., number, sizes,
- and attributes of IO windows) are fixed by the nature of the
- device, and can be hard-wired here.
- */
link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
return teles_cs_config(link);
} /* teles_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void __devexit teles_detach(struct pcmcia_device *link)
{
local_info_t *info = link->priv;
@@ -131,14 +85,6 @@ static void __devexit teles_detach(struct pcmcia_device *link)
kfree(info);
} /* teles_detach */
-/*======================================================================
-
- teles_cs_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- device available to the system.
-
-======================================================================*/
-
static int teles_cs_configcheck(struct pcmcia_device *p_dev, void *priv_data)
{
int j;
@@ -204,14 +150,6 @@ cs_failed:
return -ENODEV;
} /* teles_cs_config */
-/*======================================================================
-
- After a card is removed, teles_cs_release() will unregister the net
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
-======================================================================*/
-
static void teles_cs_release(struct pcmcia_device *link)
{
local_info_t *local = link->priv;
generated by cgit v1.1 at 2025-01-13 17:50:30 +0000