diff options
Diffstat (limited to 'drivers/net/8390.c')
| -rw-r--r-- | drivers/net/8390.c | 1080 |
1 files changed, 8 insertions, 1072 deletions
diff --git a/drivers/net/8390.c b/drivers/net/8390.c index 3d1c599..a828076 100644 --- a/drivers/net/8390.c +++ b/drivers/net/8390.c @@ -1,1104 +1,40 @@ -/* 8390.c: A general NS8390 ethernet driver core for linux. */ -/* - Written 1992-94 by Donald Becker. - - Copyright 1993 United States Government as represented by the - Director, National Security Agency. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - The author may be reached as becker@scyld.com, or C/O - Scyld Computing Corporation - 410 Severn Ave., Suite 210 - Annapolis MD 21403 - - - This is the chip-specific code for many 8390-based ethernet adaptors. - This is not a complete driver, it must be combined with board-specific - code such as ne.c, wd.c, 3c503.c, etc. - - Seeing how at least eight drivers use this code, (not counting the - PCMCIA ones either) it is easy to break some card by what seems like - a simple innocent change. Please contact me or Donald if you think - you have found something that needs changing. -- PG - - - Changelog: - - Paul Gortmaker : remove set_bit lock, other cleanups. - Paul Gortmaker : add ei_get_8390_hdr() so we can pass skb's to - ei_block_input() for eth_io_copy_and_sum(). - Paul Gortmaker : exchange static int ei_pingpong for a #define, - also add better Tx error handling. - Paul Gortmaker : rewrite Rx overrun handling as per NS specs. - Alexey Kuznetsov : use the 8390's six bit hash multicast filter. - Paul Gortmaker : tweak ANK's above multicast changes a bit. - Paul Gortmaker : update packet statistics for v2.1.x - Alan Cox : support arbitary stupid port mappings on the - 68K Macintosh. Support >16bit I/O spaces - Paul Gortmaker : add kmod support for auto-loading of the 8390 - module by all drivers that require it. - Alan Cox : Spinlocking work, added 'BUG_83C690' - Paul Gortmaker : Separate out Tx timeout code from Tx path. - Paul Gortmaker : Remove old unused single Tx buffer code. - Hayato Fujiwara : Add m32r support. - Paul Gortmaker : use skb_padto() instead of stack scratch area - - Sources: - The National Semiconductor LAN Databook, and the 3Com 3c503 databook. - - */ +/* 8390 core for usual drivers */ static const char version[] = "8390.c:v1.10cvs 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n"; -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/jiffies.h> -#include <linux/fs.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/bitops.h> -#include <asm/system.h> -#include <asm/uaccess.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/fcntl.h> -#include <linux/in.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/crc32.h> - -#include <linux/netdevice.h> -#include <linux/etherdevice.h> - -#define NS8390_CORE -#include "8390.h" - -#define BUG_83C690 - -/* These are the operational function interfaces to board-specific - routines. - void reset_8390(struct net_device *dev) - Resets the board associated with DEV, including a hardware reset of - the 8390. This is only called when there is a transmit timeout, and - it is always followed by 8390_init(). - void block_output(struct net_device *dev, int count, const unsigned char *buf, - int start_page) - Write the COUNT bytes of BUF to the packet buffer at START_PAGE. The - "page" value uses the 8390's 256-byte pages. - void get_8390_hdr(struct net_device *dev, struct e8390_hdr *hdr, int ring_page) - Read the 4 byte, page aligned 8390 header. *If* there is a - subsequent read, it will be of the rest of the packet. - void block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) - Read COUNT bytes from the packet buffer into the skb data area. Start - reading from RING_OFFSET, the address as the 8390 sees it. This will always - follow the read of the 8390 header. -*/ -#define ei_reset_8390 (ei_local->reset_8390) -#define ei_block_output (ei_local->block_output) -#define ei_block_input (ei_local->block_input) -#define ei_get_8390_hdr (ei_local->get_8390_hdr) - -/* use 0 for production, 1 for verification, >2 for debug */ -#ifndef ei_debug -int ei_debug = 1; -#endif - -/* Index to functions. */ -static void ei_tx_intr(struct net_device *dev); -static void ei_tx_err(struct net_device *dev); -static void ei_tx_timeout(struct net_device *dev); -static void ei_receive(struct net_device *dev); -static void ei_rx_overrun(struct net_device *dev); - -/* Routines generic to NS8390-based boards. */ -static void NS8390_trigger_send(struct net_device *dev, unsigned int length, - int start_page); -static void set_multicast_list(struct net_device *dev); -static void do_set_multicast_list(struct net_device *dev); - -/* - * SMP and the 8390 setup. - * - * The 8390 isnt exactly designed to be multithreaded on RX/TX. There is - * a page register that controls bank and packet buffer access. We guard - * this with ei_local->page_lock. Nobody should assume or set the page other - * than zero when the lock is not held. Lock holders must restore page 0 - * before unlocking. Even pure readers must take the lock to protect in - * page 0. - * - * To make life difficult the chip can also be very slow. We therefore can't - * just use spinlocks. For the longer lockups we disable the irq the device - * sits on and hold the lock. We must hold the lock because there is a dual - * processor case other than interrupts (get stats/set multicast list in - * parallel with each other and transmit). - * - * Note: in theory we can just disable the irq on the card _but_ there is - * a latency on SMP irq delivery. So we can easily go "disable irq" "sync irqs" - * enter lock, take the queued irq. So we waddle instead of flying. - * - * Finally by special arrangement for the purpose of being generally - * annoying the transmit function is called bh atomic. That places - * restrictions on the user context callers as disable_irq won't save - * them. - */ - - +#include "lib8390.c" -/** - * ei_open - Open/initialize the board. - * @dev: network device to initialize - * - * This routine goes all-out, setting everything - * up anew at each open, even though many of these registers should only - * need to be set once at boot. - */ int ei_open(struct net_device *dev) { - unsigned long flags; - struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev); - - /* The card I/O part of the driver (e.g. 3c503) can hook a Tx timeout - wrapper that does e.g. media check & then calls ei_tx_timeout. */ - if (dev->tx_timeout == NULL) - dev->tx_timeout = ei_tx_timeout; - if (dev->watchdog_timeo <= 0) - dev->watchdog_timeo = TX_TIMEOUT; - - /* - * Grab the page lock so we own the register set, then call - * the init function. - */ - - spin_lock_irqsave(&ei_local->page_lock, flags); - NS8390_init(dev, 1); - /* Set the flag before we drop the lock, That way the IRQ arrives - after its set and we get no silly warnings */ - netif_start_queue(dev); - spin_unlock_irqrestore(&ei_local->page_lock, flags); - ei_local->irqlock = 0; - return 0; + return __ei_open(dev); } -/** - * ei_close - shut down network device - * @dev: network device to close - * - * Opposite of ei_open(). Only used when "ifconfig <devname> down" is done. - */ int ei_close(struct net_device *dev) { - struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev); - unsigned long flags; - - /* - * Hold the page lock during close - */ - - spin_lock_irqsave(&ei_local->page_lock, flags); - NS8390_init(dev, 0); - spin_unlock_irqrestore(&ei_local->page_lock, flags); - netif_stop_queue(dev); - return 0; -} - -/** - * ei_tx_timeout - handle transmit time out condition - * @dev: network device which has apparently fallen asleep - * - * Called by kernel when device never acknowledges a transmit has - * completed (or failed) - i.e. never posted a Tx related interrupt. - */ - -void ei_tx_timeout(struct net_device *dev) -{ - long e8390_base = dev->base_addr; - struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev); - int txsr, isr, tickssofar = jiffies - dev->trans_start; - unsigned long flags; - -#if defined(CONFIG_M32R) && defined(CONFIG_SMP) - unsigned long icucr; - - local_irq_save(flags); - icucr = inl(M32R_ICU_CR1_PORTL); - icucr |= M32R_ICUCR_ISMOD11; - outl(icucr, M32R_ICU_CR1_PORTL); - local_irq_restore(flags); -#endif - ei_local->stat.tx_errors++; - - spin_lock_irqsave(&ei_local->page_lock, flags); - txsr = inb(e8390_base+EN0_TSR); - isr = inb(e8390_base+EN0_ISR); - spin_unlock_irqrestore(&ei_local->page_lock, flags); - - printk(KERN_DEBUG "%s: Tx timed out, %s TSR=%#2x, ISR=%#2x, t=%d.\n", - dev->name, (txsr & ENTSR_ABT) ? "excess collisions." : - (isr) ? "lost interrupt?" : "cable problem?", txsr, isr, tickssofar); - - if (!isr && !ei_local->stat.tx_packets) - { - /* The 8390 probably hasn't gotten on the cable yet. */ - ei_local->interface_num ^= 1; /* Try a different xcvr. */ - } - - /* Ugly but a reset can be slow, yet must be protected */ - - disable_irq_nosync_lockdep(dev->irq); - spin_lock(&ei_local->page_lock); - - /* Try to restart the card. Perhaps the user has fixed something. */ - ei_reset_8390(dev); - NS8390_init(dev, 1); - - spin_unlock(&ei_local->page_lock); - enable_irq_lockdep(dev->irq); - netif_wake_queue(dev); -} - -/** - * ei_start_xmit - begin packet transmission - * @skb: packet to be sent - * @dev: network device to which packet is sent - * - * Sends a packet to an 8390 network device. - */ - -static int ei_start_xmit(struct sk_buff *skb, struct net_device *dev) -{ - long e8390_base = dev->base_addr; - struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev); - int send_length = skb->len, output_page; - unsigned long flags; - char buf[ETH_ZLEN]; - char *data = skb->data; - - if (skb->len < ETH_ZLEN) { - memset(buf, 0, ETH_ZLEN); /* more efficient than doing just the needed bits */ - memcpy(buf, data, skb->len); - send_length = ETH_ZLEN; - data = buf; - } - - /* Mask interrupts from the ethercard. - SMP: We have to grab the lock here otherwise the IRQ handler - on another CPU can flip window and race the IRQ mask set. We end - up trashing the mcast filter not disabling irqs if we don't lock */ - - spin_lock_irqsave(&ei_local->page_lock, flags); - outb_p(0x00, e8390_base + EN0_IMR); - spin_unlock_irqrestore(&ei_local->page_lock, flags); - - - /* - * Slow phase with lock held. - */ - - disable_irq_nosync_lockdep_irqsave(dev->irq, &flags); - - spin_lock(&ei_local->page_lock); - - ei_local->irqlock = 1; - - /* - * We have two Tx slots available for use. Find the first free - * slot, and then perform some sanity checks. With two Tx bufs, - * you get very close to transmitting back-to-back packets. With - * only one Tx buf, the transmitter sits idle while you reload the - * card, leaving a substantial gap between each transmitted packet. - */ - - if (ei_local->tx1 == 0) - { - output_page = ei_local->tx_start_page; - ei_local->tx1 = send_length; - if (ei_debug && ei_local->tx2 > 0) - printk(KERN_DEBUG "%s: idle transmitter tx2=%d, lasttx=%d, txing=%d.\n", - dev->name, ei_local->tx2, ei_local->lasttx, ei_local->txing); - } - else if (ei_local->tx2 == 0) - { - output_page = ei_local->tx_start_page + TX_PAGES/2; - ei_local->tx2 = send_length; - if (ei_debug && ei_local->tx1 > 0) - printk(KERN_DEBUG "%s: idle transmitter, tx1=%d, lasttx=%d, txing=%d.\n", - dev->name, ei_local->tx1, ei_local->lasttx, ei_local->txing); - } - else - { /* We should never get here. */ - if (ei_debug) - printk(KERN_DEBUG "%s: No Tx buffers free! tx1=%d tx2=%d last=%d\n", - dev->name, ei_local->tx1, ei_local->tx2, ei_local->lasttx); - ei_local->irqlock = 0; - netif_stop_queue(dev); - outb_p(ENISR_ALL, e8390_base + EN0_IMR); - spin_unlock(&ei_local->page_lock); - enable_irq_lockdep_irqrestore(dev->irq, &flags); - ei_local->stat.tx_errors++; - return 1; - } - - /* - * Okay, now upload the packet and trigger a send if the transmitter - * isn't already sending. If it is busy, the interrupt handler will - * trigger the send later, upon receiving a Tx done interrupt. - */ - - ei_block_output(dev, send_length, data, output_page); - - if (! ei_local->txing) - { - ei_local->txing = 1; - NS8390_trigger_send(dev, send_length, output_page); - dev->trans_start = jiffies; - if (output_page == ei_local->tx_start_page) - { - ei_local->tx1 = -1; - ei_local->lasttx = -1; - } - else - { - ei_local->tx2 = -1; - ei_local->lasttx = -2; - } - } - else ei_local->txqueue++; - - if (ei_local->tx1 && ei_local->tx2) - netif_stop_queue(dev); - else - netif_start_queue(dev); - - /* Turn 8390 interrupts back on. */ - ei_local->irqlock = 0; - outb_p(ENISR_ALL, e8390_base + EN0_IMR); - - spin_unlock(&ei_local->page_lock); - enable_irq_lockdep_irqrestore(dev->irq, &flags); - - dev_kfree_skb (skb); - ei_local->stat.tx_bytes += send_length; - - return 0; + return __ei_close(dev); } -/** - * ei_interrupt - handle the interrupts from an 8390 - * @irq: interrupt number - * @dev_id: a pointer to the net_device - * - * Handle the ether interface interrupts. We pull packets from - * the 8390 via the card specific functions and fire them at the networking - * stack. We also handle transmit completions and wake the transmit path if - * necessary. We also update the counters and do other housekeeping as - * needed. - */ - irqreturn_t ei_interrupt(int irq, void *dev_id) { - struct net_device *dev = dev_id; - long e8390_base; - int interrupts, nr_serviced = 0; - struct ei_device *ei_local; - - e8390_base = dev->base_addr; - ei_local = netdev_priv(dev); - - /* - * Protect the irq test too. - */ - - spin_lock(&ei_local->page_lock); - - if (ei_local->irqlock) - { -#if 1 /* This might just be an interrupt for a PCI device sharing this line */ - /* The "irqlock" check is only for testing. */ - printk(ei_local->irqlock - ? "%s: Interrupted while interrupts are masked! isr=%#2x imr=%#2x.\n" - : "%s: Reentering the interrupt handler! isr=%#2x imr=%#2x.\n", - dev->name, inb_p(e8390_base + EN0_ISR), - inb_p(e8390_base + EN0_IMR)); -#endif - spin_unlock(&ei_local->page_lock); - return IRQ_NONE; - } - - /* Change to page 0 and read the intr status reg. */ - outb_p(E8390_NODMA+E8390_PAGE0, e8390_base + E8390_CMD); - if (ei_debug > 3) - printk(KERN_DEBUG "%s: interrupt(isr=%#2.2x).\n", dev->name, - inb_p(e8390_base + EN0_ISR)); - - /* !!Assumption!! -- we stay in page 0. Don't break this. */ - while ((interrupts = inb_p(e8390_base + EN0_ISR)) != 0 - && ++nr_serviced < MAX_SERVICE) - { - if (!netif_running(dev)) { - printk(KERN_WARNING "%s: interrupt from stopped card\n", dev->name); - /* rmk - acknowledge the interrupts */ - outb_p(interrupts, e8390_base + EN0_ISR); - interrupts = 0; - break; - } - if (interrupts & ENISR_OVER) - ei_rx_overrun(dev); - else if (interrupts & (ENISR_RX+ENISR_RX_ERR)) - { - /* Got a good (?) packet. */ - ei_receive(dev); - } - /* Push the next to-transmit packet through. */ - if (interrupts & ENISR_TX) - ei_tx_intr(dev); - else if (interrupts & ENISR_TX_ERR) - ei_tx_err(dev); - - if (interrupts & ENISR_COUNTERS) - { - ei_local->stat.rx_frame_errors += inb_p(e8390_base + EN0_COUNTER0); - ei_local->stat.rx_crc_errors += inb_p(e8390_base + EN0_COUNTER1); - ei_local->stat.rx_missed_errors+= inb_p(e8390_base + EN0_COUNTER2); - outb_p(ENISR_COUNTERS, e8390_base + EN0_ISR); /* Ack intr. */ - } - - /* Ignore any RDC interrupts that make it back to here. */ - if (interrupts & ENISR_RDC) - { - outb_p(ENISR_RDC, e8390_base + EN0_ISR); - } - - outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, e8390_base + E8390_CMD); - } - - if (interrupts && ei_debug) - { - outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, e8390_base + E8390_CMD); - if (nr_serviced >= MAX_SERVICE) - { - /* 0xFF is valid for a card removal */ - if(interrupts!=0xFF) - printk(KERN_WARNING "%s: Too much work at interrupt, status %#2.2x\n", - dev->name, interrupts); - outb_p(ENISR_ALL, e8390_base + EN0_ISR); /* Ack. most intrs. */ - } else { - printk(KERN_WARNING "%s: unknown interrupt %#2x\n", dev->name, interrupts); - outb_p(0xff, e8390_base + EN0_ISR); /* Ack. all intrs. */ - } - } - spin_unlock(&ei_local->page_lock); - return IRQ_RETVAL(nr_serviced > 0); + return __ei_interrupt(irq, dev_id); } #ifdef CONFIG_NET_POLL_CONTROLLER void ei_poll(struct net_device *dev) { - disable_irq_lockdep(dev->irq); - ei_interrupt(dev->irq, dev); - enable_irq_lockdep(dev->irq); + __ei_poll(dev); } #endif -/** - * ei_tx_err - handle transmitter error - * @dev: network device which threw the exception - * - * A transmitter error has happened. Most likely excess collisions (which - * is a fairly normal condition). If the error is one where the Tx will - * have been aborted, we try and send another one right away, instead of - * letting the failed packet sit and collect dust in the Tx buffer. This - * is a much better solution as it avoids kernel based Tx timeouts, and - * an unnecessary card reset. - * - * Called with lock held. - */ - -static void ei_tx_err(struct net_device *dev) -{ - long e8390_base = dev->base_addr; - struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev); - unsigned char txsr = inb_p(e8390_base+EN0_TSR); - unsigned char tx_was_aborted = txsr & (ENTSR_ABT+ENTSR_FU); - -#ifdef VERBOSE_ERROR_DUMP - printk(KERN_DEBUG "%s: transmitter error (%#2x): ", dev->name, txsr); - if (txsr & ENTSR_ABT) - printk("excess-collisions "); - if (txsr & ENTSR_ND) - printk("non-deferral "); - if (txsr & ENTSR_CRS) - printk("lost-carrier "); - if (txsr & ENTSR_FU) - printk("FIFO-underrun "); - if (txsr & ENTSR_CDH) - printk("lost-heartbeat "); - printk("\n"); -#endif - - outb_p(ENISR_TX_ERR, e8390_base + EN0_ISR); /* Ack intr. */ - - if (tx_was_aborted) - ei_tx_intr(dev); - else - { - ei_local->stat.tx_errors++; - if (txsr & ENTSR_CRS) ei_local->stat.tx_carrier_errors++; - if (txsr & ENTSR_CDH) ei_local->stat.tx_heartbeat_errors++; - if (txsr & ENTSR_OWC) ei_local->stat.tx_window_errors++; - } -} - -/** - * ei_tx_intr - transmit interrupt handler - * @dev: network device for which tx intr is handled - * - * We have finished a transmit: check for errors and then trigger the next - * packet to be sent. Called with lock held. - */ - -static void ei_tx_intr(struct net_device *dev) -{ - long e8390_base = dev->base_addr; - struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev); - int status = inb(e8390_base + EN0_TSR); - - outb_p(ENISR_TX, e8390_base + EN0_ISR); /* Ack intr. */ - - /* - * There are two Tx buffers, see which one finished, and trigger - * the send of another one if it exists. - */ - ei_local->txqueue--; - - if (ei_local->tx1 < 0) - { - if (ei_local->lasttx != 1 && ei_local->lasttx != -1) - printk(KERN_ERR "%s: bogus last_tx_buffer %d, tx1=%d.\n", - ei_local->name, ei_local->lasttx, ei_local->tx1); - ei_local->tx1 = 0; - if (ei_local->tx2 > 0) - { - ei_local->txing = 1; - NS8390_trigger_send(dev, ei_local->tx2, ei_local->tx_start_page + 6); - dev->trans_start = jiffies; - ei_local->tx2 = -1, - ei_local->lasttx = 2; - } - else ei_local->lasttx = 20, ei_local->txing = 0; - } - else if (ei_local->tx2 < 0) - { - if (ei_local->lasttx != 2 && ei_local->lasttx != -2) - printk("%s: bogus last_tx_buffer %d, tx2=%d.\n", - ei_local->name, ei_local->lasttx, ei_local->tx2); - ei_local->tx2 = 0; - if (ei_local->tx1 > 0) - { - ei_local->txing = 1; - NS8390_trigger_send(dev, ei_local->tx1, ei_local->tx_start_page); - dev->trans_start = jiffies; - ei_local->tx1 = -1; - ei_local->lasttx = 1; - } - else - ei_local->lasttx = 10, ei_local->txing = 0; - } -// else printk(KERN_WARNING "%s: unexpected TX-done interrupt, lasttx=%d.\n", -// dev->name, ei_local->lasttx); - - /* Minimize Tx latency: update the statistics after we restart TXing. */ - if (status & ENTSR_COL) - ei_local->stat.collisions++; - if (status & ENTSR_PTX) - ei_local->stat.tx_packets++; - else - { - ei_local->stat.tx_errors++; - if (status & ENTSR_ABT) - { - ei_local->stat.tx_aborted_errors++; - ei_local->stat.collisions += 16; - } - if (status & ENTSR_CRS) - ei_local->stat.tx_carrier_errors++; - if (status & ENTSR_FU) - ei_local->stat.tx_fifo_errors++; - if (status & ENTSR_CDH) - ei_local->stat.tx_heartbeat_errors++; - if (status & ENTSR_OWC) - ei_local->stat.tx_window_errors++; - } - netif_wake_queue(dev); -} - -/** - * ei_receive - receive some packets - * @dev: network device with which receive will be run - * - * We have a good packet(s), get it/them out of the buffers. - * Called with lock held. - */ - -static void ei_receive(struct net_device *dev) -{ - long e8390_base = dev->base_addr; - struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev); - unsigned char rxing_page, this_frame, next_frame; - unsigned short current_offset; - int rx_pkt_count = 0; - struct e8390_pkt_hdr rx_frame; - int num_rx_pages = ei_local->stop_page-ei_local->rx_start_page; - - while (++rx_pkt_count < 10) - { - int pkt_len, pkt_stat; - - /* Get the rx page (incoming packet pointer). */ - outb_p(E8390_NODMA+E8390_PAGE1, e8390_base + E8390_CMD); - rxing_page = inb_p(e8390_base + EN1_CURPAG); - outb_p(E8390_NODMA+E8390_PAGE0, e8390_base + E8390_CMD); - - /* Remove one frame from the ring. Boundary is always a page behind. */ - this_frame = inb_p(e8390_base + EN0_BOUNDARY) + 1; - if (this_frame >= ei_local->stop_page) - this_frame = ei_local->rx_start_page; - - /* Someday we'll omit the previous, iff we never get this message. - (There is at least one clone claimed to have a problem.) - - Keep quiet if it looks like a card removal. One problem here - is that some clones crash in roughly the same way. - */ - if (ei_debug > 0 && this_frame != ei_local->current_page && (this_frame!=0x0 || rxing_page!=0xFF)) - printk(KERN_ERR "%s: mismatched read page pointers %2x vs %2x.\n", - dev->name, this_frame, ei_local->current_page); - - if (this_frame == rxing_page) /* Read all the frames? */ - break; /* Done for now */ - - current_offset = this_frame << 8; - ei_get_8390_hdr(dev, &rx_frame, this_frame); - - pkt_len = rx_frame.count - sizeof(struct e8390_pkt_hdr); - pkt_stat = rx_frame.status; - - next_frame = this_frame + 1 + ((pkt_len+4)>>8); - - /* Check for bogosity warned by 3c503 book: the status byte is never - written. This happened a lot during testing! This code should be - cleaned up someday. */ - if (rx_frame.next != next_frame - && rx_frame.next != next_frame + 1 - && rx_frame.next != next_frame - num_rx_pages - && rx_frame.next != next_frame + 1 - num_rx_pages) { - ei_local->current_page = rxing_page; - outb(ei_local->current_page-1, e8390_base+EN0_BOUNDARY); - ei_local->stat.rx_errors++; - continue; - } - - if (pkt_len < 60 || pkt_len > 1518) - { - if (ei_debug) - printk(KERN_DEBUG "%s: bogus packet size: %d, status=%#2x nxpg=%#2x.\n", - dev->name, rx_frame.count, rx_frame.status, - rx_frame.next); - ei_local->stat.rx_errors++; - ei_local->stat.rx_length_errors++; - } - else if ((pkt_stat & 0x0F) == ENRSR_RXOK) - { - struct sk_buff *skb; - - skb = dev_alloc_skb(pkt_len+2); - if (skb == NULL) - { - if (ei_debug > 1) - printk(KERN_DEBUG "%s: Couldn't allocate a sk_buff of size %d.\n", - dev->name, pkt_len); - ei_local->stat.rx_dropped++; - break; - } - else - { - skb_reserve(skb,2); /* IP headers on 16 byte boundaries */ - skb->dev = dev; - skb_put(skb, pkt_len); /* Make room */ - ei_block_input(dev, pkt_len, skb, current_offset + sizeof(rx_frame)); - skb->protocol=eth_type_trans(skb,dev); - netif_rx(skb); - dev->last_rx = jiffies; - ei_local->stat.rx_packets++; - ei_local->stat.rx_bytes += pkt_len; - if (pkt_stat & ENRSR_PHY) - ei_local->stat.multicast++; - } - } - else - { - if (ei_debug) - printk(KERN_DEBUG "%s: bogus packet: status=%#2x nxpg=%#2x size=%d\n", - dev->name, rx_frame.status, rx_frame.next, - rx_frame.count); - ei_local->stat.rx_errors++; - /* NB: The NIC counts CRC, frame and missed errors. */ - if (pkt_stat & ENRSR_FO) - ei_local->stat.rx_fifo_errors++; - } - next_frame = rx_frame.next; - - /* This _should_ never happen: it's here for avoiding bad clones. */ - if (next_frame >= ei_local->stop_page) { - printk("%s: next frame inconsistency, %#2x\n", dev->name, - next_frame); - next_frame = ei_local->rx_start_page; - } - ei_local->current_page = next_frame; - outb_p(next_frame-1, e8390_base+EN0_BOUNDARY); - } - - /* We used to also ack ENISR_OVER here, but that would sometimes mask - a real overrun, leaving the 8390 in a stopped state with rec'vr off. */ - outb_p(ENISR_RX+ENISR_RX_ERR, e8390_base+EN0_ISR); - return; -} - -/** - * ei_rx_overrun - handle receiver overrun - * @dev: network device which threw exception - * - * We have a receiver overrun: we have to kick the 8390 to get it started - * again. Problem is that you have to kick it exactly as NS prescribes in - * the updated datasheets, or "the NIC may act in an unpredictable manner." - * This includes causing "the NIC to defer indefinitely when it is stopped - * on a busy network." Ugh. - * Called with lock held. Don't call this with the interrupts off or your - * computer will hate you - it takes 10ms or so. - */ - -static void ei_rx_overrun(struct net_device *dev) -{ - long e8390_base = dev->base_addr; - unsigned char was_txing, must_resend = 0; - struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev); - - /* - * Record whether a Tx was in progress and then issue the - * stop command. - */ - was_txing = inb_p(e8390_base+E8390_CMD) & E8390_TRANS; - outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, e8390_base+E8390_CMD); - - if (ei_debug > 1) - printk(KERN_DEBUG "%s: Receiver overrun.\n", dev->name); - ei_local->stat.rx_over_errors++; - - /* - * Wait a full Tx time (1.2ms) + some guard time, NS says 1.6ms total. - * Early datasheets said to poll the reset bit, but now they say that - * it "is not a reliable indicator and subsequently should be ignored." - * We wait at least 10ms. - */ - - mdelay(10); - - /* - * Reset RBCR[01] back to zero as per magic incantation. - */ - outb_p(0x00, e8390_base+EN0_RCNTLO); - outb_p(0x00, e8390_base+EN0_RCNTHI); - - /* - * See if any Tx was interrupted or not. According to NS, this - * step is vital, and skipping it will cause no end of havoc. - */ - - if (was_txing) - { - unsigned char tx_completed = inb_p(e8390_base+EN0_ISR) & (ENISR_TX+ENISR_TX_ERR); - if (!tx_completed) - must_resend = 1; - } - - /* - * Have to enter loopback mode and then restart the NIC before - * you are allowed to slurp packets up off the ring. - */ - outb_p(E8390_TXOFF, e8390_base + EN0_TXCR); - outb_p(E8390_NODMA + E8390_PAGE0 + E8390_START, e8390_base + E8390_CMD); - - /* - * Clear the Rx ring of all the debris, and ack the interrupt. - */ - ei_receive(dev); - outb_p(ENISR_OVER, e8390_base+EN0_ISR); - - /* - * Leave loopback mode, and resend any packet that got stopped. - */ - outb_p(E8390_TXCONFIG, e8390_base + EN0_TXCR); - if (must_resend) - outb_p(E8390_NODMA + E8390_PAGE0 + E8390_START + E8390_TRANS, e8390_base + E8390_CMD); -} - -/* - * Collect the stats. This is called unlocked and from several contexts. - */ - -static struct net_device_stats *get_stats(struct net_device *dev) -{ - long ioaddr = dev->base_addr; - struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev); - unsigned long flags; - - /* If the card is stopped, just return the present stats. */ - if (!netif_running(dev)) - return &ei_local->stat; - - spin_lock_irqsave(&ei_local->page_lock,flags); - /* Read the counter registers, assuming we are in page 0. */ - ei_local->stat.rx_frame_errors += inb_p(ioaddr + EN0_COUNTER0); - ei_local->stat.rx_crc_errors += inb_p(ioaddr + EN0_COUNTER1); - ei_local->stat.rx_missed_errors+= inb_p(ioaddr + EN0_COUNTER2); - spin_unlock_irqrestore(&ei_local->page_lock, flags); - - return &ei_local->stat; -} - -/* - * Form the 64 bit 8390 multicast table from the linked list of addresses - * associated with this dev structure. - */ - -static inline void make_mc_bits(u8 *bits, struct net_device *dev) -{ - struct dev_mc_list *dmi; - - for (dmi=dev->mc_list; dmi; dmi=dmi->next) - { - u32 crc; - if (dmi->dmi_addrlen != ETH_ALEN) - { - printk(KERN_INFO "%s: invalid multicast address length given.\n", dev->name); - continue; - } - crc = ether_crc(ETH_ALEN, dmi->dmi_addr); - /* - * The 8390 uses the 6 most significant bits of the - * CRC to index the multicast table. - */ - bits[crc>>29] |= (1<<((crc>>26)&7)); - } -} - -/** - * do_set_multicast_list - set/clear multicast filter - * @dev: net device for which multicast filter is adjusted - * - * Set or clear the multicast filter for this adaptor. May be called - * from a BH in 2.1.x. Must be called with lock held. - */ - -static void do_set_multicast_list(struct net_device *dev) -{ - long e8390_base = dev->base_addr; - int i; - struct ei_device *ei_local = (struct ei_device*)netdev_priv(dev); - - if (!(dev->flags&(IFF_PROMISC|IFF_ALLMULTI))) - { - memset(ei_local->mcfilter, 0, 8); - if (dev->mc_list) - make_mc_bits(ei_local->mcfilter, dev); - } - else - memset(ei_local->mcfilter, 0xFF, 8); /* mcast set to accept-all */ - - /* - * DP8390 manuals don't specify any magic sequence for altering - * the multicast regs on an already running card. To be safe, we - * ensure multicast mode is off prior to loading up the new hash - * table. If this proves to be not enough, we can always resort - * to stopping the NIC, loading the table and then restarting. - * - * Bug Alert! The MC regs on the SMC 83C690 (SMC Elite and SMC - * Elite16) appear to be write-only. The NS 8390 data sheet lists - * them as r/w so this is a bug. The SMC 83C790 (SMC Ultra and - * Ultra32 EISA) appears to have this bug fixed. - */ - - if (netif_running(dev)) - outb_p(E8390_RXCONFIG, e8390_base + EN0_RXCR); - outb_p(E8390_NODMA + E8390_PAGE1, e8390_base + E8390_CMD); - for(i = 0; i < 8; i++) - { - outb_p(ei_local->mcfilter[i], e8390_base + EN1_MULT_SHIFT(i)); -#ifndef BUG_83C690 - if(inb_p(e8390_base + EN1_MULT_SHIFT(i))!=ei_local->mcfilter[i]) - printk(KERN_ERR "Multicast filter read/write mismap %d\n",i); -#endif - } - outb_p(E8390_NODMA + E8390_PAGE0, e8390_base + E8390_CMD); - - if(dev->flags&IFF_PROMISC) - outb_p(E8390_RXCONFIG | 0x18, e8390_base + EN0_RXCR); - else if(dev->flags&IFF_ALLMULTI || dev->mc_list) - outb_p(E8390_RXCONFIG | 0x08, e8390_base + EN0_RXCR); - else - outb_p(E8390_RXCONFIG, e8390_base + EN0_RXCR); - } - -/* - * Called without lock held. This is invoked from user context and may - * be parallel to just about everything else. Its also fairly quick and - * not called too often. Must protect against both bh and irq users - */ - -static void set_multicast_list(struct net_device *dev) -{ - unsigned long flags; - struct ei_device *ei_local = (struct ei_device*)netdev_priv(dev); - - spin_lock_irqsave(&ei_local->page_lock, flags); - do_set_multicast_list(dev); - spin_unlock_irqrestore(&ei_local->page_lock, flags); -} - -/** - * ethdev_setup - init rest of 8390 device struct - * @dev: network device structure to init - * - * Initialize the rest of the 8390 device structure. Do NOT __init - * this, as it is used by 8390 based modular drivers too. - */ - -static void ethdev_setup(struct net_device *dev) -{ - struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev); - if (ei_debug > 1) - printk(version); - - dev->hard_start_xmit = &ei_start_xmit; - dev->get_stats = get_stats; - dev->set_multicast_list = &set_multicast_list; - - ether_setup(dev); - - spin_lock_init(&ei_local->page_lock); -} - -/** - * alloc_ei_netdev - alloc_etherdev counterpart for 8390 - * @size: extra bytes to allocate - * - * Allocate 8390-specific net_device. - */ struct net_device *__alloc_ei_netdev(int size) { - return alloc_netdev(sizeof(struct ei_device) + size, "eth%d", - ethdev_setup); + return ____alloc_ei_netdev(size); } - - - -/* This page of functions should be 8390 generic */ -/* Follow National Semi's recommendations for initializing the "NIC". */ - -/** - * NS8390_init - initialize 8390 hardware - * @dev: network device to initialize - * @startp: boolean. non-zero value to initiate chip processing - * - * Must be called with lock held. - */ - void NS8390_init(struct net_device *dev, int startp) { - long e8390_base = dev->base_addr; - struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev); - int i; - int endcfg = ei_local->word16 - ? (0x48 | ENDCFG_WTS | (ei_local->bigendian ? ENDCFG_BOS : 0)) - : 0x48; - - if(sizeof(struct e8390_pkt_hdr)!=4) - panic("8390.c: header struct mispacked\n"); - /* Follow National Semi's recommendations for initing the DP83902. */ - outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, e8390_base+E8390_CMD); /* 0x21 */ - outb_p(endcfg, e8390_base + EN0_DCFG); /* 0x48 or 0x49 */ - /* Clear the remote byte count registers. */ - outb_p(0x00, e8390_base + EN0_RCNTLO); - outb_p(0x00, e8390_base + EN0_RCNTHI); - /* Set to monitor and loopback mode -- this is vital!. */ - outb_p(E8390_RXOFF, e8390_base + EN0_RXCR); /* 0x20 */ - outb_p(E8390_TXOFF, e8390_base + EN0_TXCR); /* 0x02 */ - /* Set the transmit page and receive ring. */ - outb_p(ei_local->tx_start_page, e8390_base + EN0_TPSR); - ei_local->tx1 = ei_local->tx2 = 0; - outb_p(ei_local->rx_start_page, e8390_base + EN0_STARTPG); - outb_p(ei_local->stop_page-1, e8390_base + EN0_BOUNDARY); /* 3c503 says 0x3f,NS0x26*/ - ei_local->current_page = ei_local->rx_start_page; /* assert boundary+1 */ - outb_p(ei_local->stop_page, e8390_base + EN0_STOPPG); - /* Clear the pending interrupts and mask. */ - outb_p(0xFF, e8390_base + EN0_ISR); - outb_p(0x00, e8390_base + EN0_IMR); - - /* Copy the station address into the DS8390 registers. */ - - outb_p(E8390_NODMA + E8390_PAGE1 + E8390_STOP, e8390_base+E8390_CMD); /* 0x61 */ - for(i = 0; i < 6; i++) - { - outb_p(dev->dev_addr[i], e8390_base + EN1_PHYS_SHIFT(i)); - if (ei_debug > 1 && inb_p(e8390_base + EN1_PHYS_SHIFT(i))!=dev->dev_addr[i]) - printk(KERN_ERR "Hw. address read/write mismap %d\n",i); - } - - outb_p(ei_local->rx_start_page, e8390_base + EN1_CURPAG); - outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, e8390_base+E8390_CMD); - - netif_start_queue(dev); - ei_local->tx1 = ei_local->tx2 = 0; - ei_local->txing = 0; - - if (startp) - { - outb_p(0xff, e8390_base + EN0_ISR); - outb_p(ENISR_ALL, e8390_base + EN0_IMR); - outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, e8390_base+E8390_CMD); - outb_p(E8390_TXCONFIG, e8390_base + EN0_TXCR); /* xmit on. */ - /* 3c503 TechMan says rxconfig only after the NIC is started. */ - outb_p(E8390_RXCONFIG, e8390_base + EN0_RXCR); /* rx on, */ - do_set_multicast_list(dev); /* (re)load the mcast table */ - } -} - -/* Trigger a transmit start, assuming the length is valid. - Always called with the page lock held */ - -static void NS8390_trigger_send(struct net_device *dev, unsigned int length, - int start_page) -{ - long e8390_base = dev->base_addr; - struct ei_device *ei_local __attribute((unused)) = (struct ei_device *) netdev_priv(dev); - - outb_p(E8390_NODMA+E8390_PAGE0, e8390_base+E8390_CMD); - - if (inb_p(e8390_base + E8390_CMD) & E8390_TRANS) - { - printk(KERN_WARNING "%s: trigger_send() called with the transmitter busy.\n", - dev->name); - return; - } - outb_p(length & 0xff, e8390_base + EN0_TCNTLO); - outb_p(length >> 8, e8390_base + EN0_TCNTHI); - outb_p(start_page, e8390_base + EN0_TPSR); - outb_p(E8390_NODMA+E8390_TRANS+E8390_START, e8390_base+E8390_CMD); + return __NS8390_init(dev, startp); } EXPORT_SYMBOL(ei_open); |