diff options
Diffstat (limited to 'drivers/net/wireless/rtl818x')
| -rw-r--r-- | drivers/net/wireless/rtl818x/Kconfig | 88 | ||||
| -rw-r--r-- | drivers/net/wireless/rtl818x/rtl8180_dev.c | 13 | ||||
| -rw-r--r-- | drivers/net/wireless/rtl818x/rtl8187_dev.c | 10 |
3 files changed, 102 insertions, 9 deletions
diff --git a/drivers/net/wireless/rtl818x/Kconfig b/drivers/net/wireless/rtl818x/Kconfig new file mode 100644 index 0000000..17d80fe --- /dev/null +++ b/drivers/net/wireless/rtl818x/Kconfig @@ -0,0 +1,88 @@ +# +# RTL818X Wireless LAN device configuration +# +config RTL8180 + tristate "Realtek 8180/8185 PCI support" + depends on MAC80211 && PCI && EXPERIMENTAL + select EEPROM_93CX6 + ---help--- + This is a driver for RTL8180 and RTL8185 based cards. + These are PCI based chips found in cards such as: + + (RTL8185 802.11g) + A-Link WL54PC + + (RTL8180 802.11b) + Belkin F5D6020 v3 + Belkin F5D6020 v3 + Dlink DWL-610 + Dlink DWL-510 + Netgear MA521 + Level-One WPC-0101 + Acer Aspire 1357 LMi + VCTnet PC-11B1 + Ovislink AirLive WL-1120PCM + Mentor WL-PCI + Linksys WPC11 v4 + TrendNET TEW-288PI + D-Link DWL-520 Rev D + Repotec RP-WP7126 + TP-Link TL-WN250/251 + Zonet ZEW1000 + Longshine LCS-8031-R + HomeLine HLW-PCC200 + GigaFast WF721-AEX + Planet WL-3553 + Encore ENLWI-PCI1-NT + TrendNET TEW-266PC + Gigabyte GN-WLMR101 + Siemens-fujitsu Amilo D1840W + Edimax EW-7126 + PheeNet WL-11PCIR + Tonze PC-2100T + Planet WL-8303 + Dlink DWL-650 v M1 + Edimax EW-7106 + Q-Tec 770WC + Topcom Skyr@cer 4011b + Roper FreeLan 802.11b (edition 2004) + Wistron Neweb Corp CB-200B + Pentagram HorNET + QTec 775WC + TwinMOS Booming B Series + Micronet SP906BB + Sweex LC700010 + Surecom EP-9428 + Safecom SWLCR-1100 + + Thanks to Realtek for their support! + +config RTL8187 + tristate "Realtek 8187 and 8187B USB support" + depends on MAC80211 && USB + select EEPROM_93CX6 + ---help--- + This is a driver for RTL8187 and RTL8187B based cards. + These are USB based chips found in devices such as: + + Netgear WG111v2 + Level 1 WNC-0301USB + Micronet SP907GK V5 + Encore ENUWI-G2 + Trendnet TEW-424UB + ASUS P5B Deluxe/P5K Premium motherboards + Toshiba Satellite Pro series of laptops + Asus Wireless Link + Linksys WUSB54GC-EU v2 + (v1 = rt73usb; v3 is rt2070-based, + use staging/rt3070 or try rt2800usb) + + Thanks to Realtek for their support! + +# If possible, automatically enable LEDs for RTL8187. + +config RTL8187_LEDS + bool + depends on RTL8187 && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = RTL8187) + default y + diff --git a/drivers/net/wireless/rtl818x/rtl8180_dev.c b/drivers/net/wireless/rtl818x/rtl8180_dev.c index 6b46329..21307f2 100644 --- a/drivers/net/wireless/rtl818x/rtl8180_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8180_dev.c @@ -188,6 +188,7 @@ static void rtl8180_handle_tx(struct ieee80211_hw *dev, unsigned int prio) info->flags |= IEEE80211_TX_STAT_ACK; info->status.rates[0].count = (flags & 0xFF) + 1; + info->status.rates[1].idx = -1; ieee80211_tx_status_irqsafe(dev, skb); if (ring->entries - skb_queue_len(&ring->queue) == 2) @@ -297,7 +298,7 @@ static int rtl8180_tx(struct ieee80211_hw *dev, struct sk_buff *skb) entry->flags = cpu_to_le32(tx_flags); __skb_queue_tail(&ring->queue, skb); if (ring->entries - skb_queue_len(&ring->queue) < 2) - ieee80211_stop_queue(dev, skb_get_queue_mapping(skb)); + ieee80211_stop_queue(dev, prio); spin_unlock_irqrestore(&priv->lock, flags); rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING, (1 << (prio + 4))); @@ -827,6 +828,7 @@ static int __devinit rtl8180_probe(struct pci_dev *pdev, const char *chip_name, *rf_name = NULL; u32 reg; u16 eeprom_val; + u8 mac_addr[ETH_ALEN]; err = pci_enable_device(pdev); if (err) { @@ -987,12 +989,13 @@ static int __devinit rtl8180_probe(struct pci_dev *pdev, eeprom_93cx6_read(&eeprom, 0x19, &priv->rfparam); } - eeprom_93cx6_multiread(&eeprom, 0x7, (__le16 *)dev->wiphy->perm_addr, 3); - if (!is_valid_ether_addr(dev->wiphy->perm_addr)) { + eeprom_93cx6_multiread(&eeprom, 0x7, (__le16 *)mac_addr, 3); + if (!is_valid_ether_addr(mac_addr)) { printk(KERN_WARNING "%s (rtl8180): Invalid hwaddr! Using" " randomly generated MAC addr\n", pci_name(pdev)); - random_ether_addr(dev->wiphy->perm_addr); + random_ether_addr(mac_addr); } + SET_IEEE80211_PERM_ADDR(dev, mac_addr); /* CCK TX power */ for (i = 0; i < 14; i += 2) { @@ -1024,7 +1027,7 @@ static int __devinit rtl8180_probe(struct pci_dev *pdev, } printk(KERN_INFO "%s: hwaddr %pM, %s + %s\n", - wiphy_name(dev->wiphy), dev->wiphy->perm_addr, + wiphy_name(dev->wiphy), mac_addr, chip_name, priv->rf->name); return 0; diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c index 738921f..891b849 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c @@ -1333,6 +1333,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf, u16 txpwr, reg; u16 product_id = le16_to_cpu(udev->descriptor.idProduct); int err, i; + u8 mac_addr[ETH_ALEN]; dev = ieee80211_alloc_hw(sizeof(*priv), &rtl8187_ops); if (!dev) { @@ -1390,12 +1391,13 @@ static int __devinit rtl8187_probe(struct usb_interface *intf, udelay(10); eeprom_93cx6_multiread(&eeprom, RTL8187_EEPROM_MAC_ADDR, - (__le16 __force *)dev->wiphy->perm_addr, 3); - if (!is_valid_ether_addr(dev->wiphy->perm_addr)) { + (__le16 __force *)mac_addr, 3); + if (!is_valid_ether_addr(mac_addr)) { printk(KERN_WARNING "rtl8187: Invalid hwaddr! Using randomly " "generated MAC address\n"); - random_ether_addr(dev->wiphy->perm_addr); + random_ether_addr(mac_addr); } + SET_IEEE80211_PERM_ADDR(dev, mac_addr); channel = priv->channels; for (i = 0; i < 3; i++) { @@ -1526,7 +1528,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf, skb_queue_head_init(&priv->b_tx_status.queue); printk(KERN_INFO "%s: hwaddr %pM, %s V%d + %s, rfkill mask %d\n", - wiphy_name(dev->wiphy), dev->wiphy->perm_addr, + wiphy_name(dev->wiphy), mac_addr, chip_name, priv->asic_rev, priv->rf->name, priv->rfkill_mask); #ifdef CONFIG_RTL8187_LEDS |