diff options
Diffstat (limited to 'drivers/pci')
49 files changed, 701 insertions, 693 deletions
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index ecc50db..f1dd81a 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -27,14 +27,14 @@ config PCI_MULTITHREAD_PROBE smaller speedup on single processor machines. But it can also cause lots of bad things to happen. A number - of PCI drivers can not properly handle running in this way, + of PCI drivers cannot properly handle running in this way, some will just not work properly at all, while others might decide to blow up power supplies with a huge load all at once, so use this option at your own risk. It is very unwise to use this option if you are not using a boot process that can handle devices being created in any - order. A program that can create persistant block and network + order. A program that can create persistent block and network device names (like udev) is a good idea if you wish to use this option. diff --git a/drivers/pci/access.c b/drivers/pci/access.c index ea16805..73a58c7 100644 --- a/drivers/pci/access.c +++ b/drivers/pci/access.c @@ -1,6 +1,7 @@ #include <linux/pci.h> #include <linux/module.h> #include <linux/ioport.h> +#include <linux/wait.h> #include "pci.h" @@ -63,30 +64,42 @@ EXPORT_SYMBOL(pci_bus_write_config_byte); EXPORT_SYMBOL(pci_bus_write_config_word); EXPORT_SYMBOL(pci_bus_write_config_dword); -static u32 pci_user_cached_config(struct pci_dev *dev, int pos) -{ - u32 data; +/* + * The following routines are to prevent the user from accessing PCI config + * space when it's unsafe to do so. Some devices require this during BIST and + * we're required to prevent it during D-state transitions. + * + * We have a bit per device to indicate it's blocked and a global wait queue + * for callers to sleep on until devices are unblocked. + */ +static DECLARE_WAIT_QUEUE_HEAD(pci_ucfg_wait); - data = dev->saved_config_space[pos/sizeof(dev->saved_config_space[0])]; - data >>= (pos % sizeof(dev->saved_config_space[0])) * 8; - return data; +static noinline void pci_wait_ucfg(struct pci_dev *dev) +{ + DECLARE_WAITQUEUE(wait, current); + + __add_wait_queue(&pci_ucfg_wait, &wait); + do { + set_current_state(TASK_UNINTERRUPTIBLE); + spin_unlock_irq(&pci_lock); + schedule(); + spin_lock_irq(&pci_lock); + } while (dev->block_ucfg_access); + __remove_wait_queue(&pci_ucfg_wait, &wait); } #define PCI_USER_READ_CONFIG(size,type) \ int pci_user_read_config_##size \ (struct pci_dev *dev, int pos, type *val) \ { \ - unsigned long flags; \ int ret = 0; \ u32 data = -1; \ if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \ - spin_lock_irqsave(&pci_lock, flags); \ - if (likely(!dev->block_ucfg_access)) \ - ret = dev->bus->ops->read(dev->bus, dev->devfn, \ + spin_lock_irq(&pci_lock); \ + if (unlikely(dev->block_ucfg_access)) pci_wait_ucfg(dev); \ + ret = dev->bus->ops->read(dev->bus, dev->devfn, \ pos, sizeof(type), &data); \ - else if (pos < sizeof(dev->saved_config_space)) \ - data = pci_user_cached_config(dev, pos); \ - spin_unlock_irqrestore(&pci_lock, flags); \ + spin_unlock_irq(&pci_lock); \ *val = (type)data; \ return ret; \ } @@ -95,14 +108,13 @@ int pci_user_read_config_##size \ int pci_user_write_config_##size \ (struct pci_dev *dev, int pos, type val) \ { \ - unsigned long flags; \ int ret = -EIO; \ if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \ - spin_lock_irqsave(&pci_lock, flags); \ - if (likely(!dev->block_ucfg_access)) \ - ret = dev->bus->ops->write(dev->bus, dev->devfn, \ + spin_lock_irq(&pci_lock); \ + if (unlikely(dev->block_ucfg_access)) pci_wait_ucfg(dev); \ + ret = dev->bus->ops->write(dev->bus, dev->devfn, \ pos, sizeof(type), val); \ - spin_unlock_irqrestore(&pci_lock, flags); \ + spin_unlock_irq(&pci_lock); \ return ret; \ } @@ -117,21 +129,23 @@ PCI_USER_WRITE_CONFIG(dword, u32) * pci_block_user_cfg_access - Block userspace PCI config reads/writes * @dev: pci device struct * - * This function blocks any userspace PCI config accesses from occurring. - * When blocked, any writes will be bit bucketed and reads will return the - * data saved using pci_save_state for the first 64 bytes of config - * space and return 0xff for all other config reads. - **/ + * When user access is blocked, any reads or writes to config space will + * sleep until access is unblocked again. We don't allow nesting of + * block/unblock calls. + */ void pci_block_user_cfg_access(struct pci_dev *dev) { unsigned long flags; + int was_blocked; - pci_save_state(dev); - - /* spinlock to synchronize with anyone reading config space now */ spin_lock_irqsave(&pci_lock, flags); + was_blocked = dev->block_ucfg_access; dev->block_ucfg_access = 1; spin_unlock_irqrestore(&pci_lock, flags); + + /* If we BUG() inside the pci_lock, we're guaranteed to hose + * the machine */ + BUG_ON(was_blocked); } EXPORT_SYMBOL_GPL(pci_block_user_cfg_access); @@ -140,14 +154,19 @@ EXPORT_SYMBOL_GPL(pci_block_user_cfg_access); * @dev: pci device struct * * This function allows userspace PCI config accesses to resume. - **/ + */ void pci_unblock_user_cfg_access(struct pci_dev *dev) { unsigned long flags; - /* spinlock to synchronize with anyone reading saved config space */ spin_lock_irqsave(&pci_lock, flags); + + /* This indicates a problem in the caller, but we don't need + * to kill them, unlike a double-block above. */ + WARN_ON(!dev->block_ucfg_access); + dev->block_ucfg_access = 0; + wake_up_all(&pci_ucfg_wait); spin_unlock_irqrestore(&pci_lock, flags); } EXPORT_SYMBOL_GPL(pci_unblock_user_cfg_access); diff --git a/drivers/pci/hotplug/acpi_pcihp.c b/drivers/pci/hotplug/acpi_pcihp.c index 51cb9f8..270a33c 100644 --- a/drivers/pci/hotplug/acpi_pcihp.c +++ b/drivers/pci/hotplug/acpi_pcihp.c @@ -29,10 +29,10 @@ #include <linux/kernel.h> #include <linux/types.h> #include <linux/pci.h> +#include <linux/pci_hotplug.h> #include <acpi/acpi.h> #include <acpi/acpi_bus.h> #include <acpi/actypes.h> -#include "pci_hotplug.h" #define MY_NAME "acpi_pcihp" diff --git a/drivers/pci/hotplug/acpiphp.h b/drivers/pci/hotplug/acpiphp.h index 7fff07e..ddbadd95 100644 --- a/drivers/pci/hotplug/acpiphp.h +++ b/drivers/pci/hotplug/acpiphp.h @@ -38,7 +38,7 @@ #include <linux/acpi.h> #include <linux/kobject.h> /* for KOBJ_NAME_LEN */ #include <linux/mutex.h> -#include "pci_hotplug.h" +#include <linux/pci_hotplug.h> #define dbg(format, arg...) \ do { \ @@ -62,10 +62,10 @@ struct acpiphp_slot; struct slot { struct hotplug_slot *hotplug_slot; struct acpiphp_slot *acpi_slot; + struct hotplug_slot_info info; + char name[SLOT_NAME_SIZE]; }; - - /** * struct acpiphp_bridge - PCI bridge information * diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c index e2fef60..40c79b0 100644 --- a/drivers/pci/hotplug/acpiphp_core.c +++ b/drivers/pci/hotplug/acpiphp_core.c @@ -37,10 +37,10 @@ #include <linux/kernel.h> #include <linux/pci.h> +#include <linux/pci_hotplug.h> #include <linux/slab.h> #include <linux/smp.h> #include <linux/smp_lock.h> -#include "pci_hotplug.h" #include "acpiphp.h" #define MY_NAME "acpiphp" @@ -303,25 +303,15 @@ static int __init init_acpi(void) /* read initial number of slots */ if (!retval) { num_slots = acpiphp_get_num_slots(); - if (num_slots == 0) + if (num_slots == 0) { + acpiphp_glue_exit(); retval = -ENODEV; + } } return retval; } - -/** - * make_slot_name - make a slot name that appears in pcihpfs - * @slot: slot to name - * - */ -static void make_slot_name(struct slot *slot) -{ - snprintf(slot->hotplug_slot->name, SLOT_NAME_SIZE, "%u", - slot->acpi_slot->sun); -} - /** * release_slot - free up the memory used by a slot * @hotplug_slot: slot to free @@ -332,8 +322,6 @@ static void release_slot(struct hotplug_slot *hotplug_slot) dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name); - kfree(slot->hotplug_slot->info); - kfree(slot->hotplug_slot->name); kfree(slot->hotplug_slot); kfree(slot); } @@ -342,26 +330,19 @@ static void release_slot(struct hotplug_slot *hotplug_slot) int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot) { struct slot *slot; - struct hotplug_slot *hotplug_slot; - struct hotplug_slot_info *hotplug_slot_info; int retval = -ENOMEM; slot = kzalloc(sizeof(*slot), GFP_KERNEL); if (!slot) goto error; - slot->hotplug_slot = kzalloc(sizeof(*hotplug_slot), GFP_KERNEL); + slot->hotplug_slot = kzalloc(sizeof(*slot->hotplug_slot), GFP_KERNEL); if (!slot->hotplug_slot) goto error_slot; - slot->hotplug_slot->info = kzalloc(sizeof(*hotplug_slot_info), - GFP_KERNEL); - if (!slot->hotplug_slot->info) - goto error_hpslot; + slot->hotplug_slot->info = &slot->info; - slot->hotplug_slot->name = kzalloc(SLOT_NAME_SIZE, GFP_KERNEL); - if (!slot->hotplug_slot->name) - goto error_info; + slot->hotplug_slot->name = slot->name; slot->hotplug_slot->private = slot; slot->hotplug_slot->release = &release_slot; @@ -376,21 +357,17 @@ int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot) slot->hotplug_slot->info->cur_bus_speed = PCI_SPEED_UNKNOWN; acpiphp_slot->slot = slot; - make_slot_name(slot); + snprintf(slot->name, sizeof(slot->name), "%u", slot->acpi_slot->sun); retval = pci_hp_register(slot->hotplug_slot); if (retval) { err("pci_hp_register failed with error %d\n", retval); - goto error_name; + goto error_hpslot; } info("Slot [%s] registered\n", slot->hotplug_slot->name); return 0; -error_name: - kfree(slot->hotplug_slot->name); -error_info: - kfree(slot->hotplug_slot->info); error_hpslot: kfree(slot->hotplug_slot); error_slot: diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index 83e8e44..0b9d0db 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -45,11 +45,11 @@ #include <linux/kernel.h> #include <linux/pci.h> +#include <linux/pci_hotplug.h> #include <linux/smp_lock.h> #include <linux/mutex.h> #include "../pci.h" -#include "pci_hotplug.h" #include "acpiphp.h" static LIST_HEAD(bridge_list); @@ -1693,14 +1693,10 @@ void __exit acpiphp_glue_exit(void) */ int __init acpiphp_get_num_slots(void) { - struct list_head *node; struct acpiphp_bridge *bridge; - int num_slots; - - num_slots = 0; + int num_slots = 0; - list_for_each (node, &bridge_list) { - bridge = (struct acpiphp_bridge *)node; + list_for_each_entry (bridge, &bridge_list, list) { dbg("Bus %04x:%02x has %d slot%s\n", pci_domain_nr(bridge->pci_bus), bridge->pci_bus->number, bridge->nr_slots, @@ -1807,8 +1803,8 @@ u8 acpiphp_get_power_status(struct acpiphp_slot *slot) /* - * latch closed: 1 - * latch open: 0 + * latch open: 1 + * latch closed: 0 */ u8 acpiphp_get_latch_status(struct acpiphp_slot *slot) { @@ -1816,7 +1812,7 @@ u8 acpiphp_get_latch_status(struct acpiphp_slot *slot) sta = get_slot_status(slot); - return (sta & ACPI_STA_SHOW_IN_UI) ? 1 : 0; + return (sta & ACPI_STA_SHOW_IN_UI) ? 0 : 1; } diff --git a/drivers/pci/hotplug/acpiphp_ibm.c b/drivers/pci/hotplug/acpiphp_ibm.c index d0a07d9..bd40aee 100644 --- a/drivers/pci/hotplug/acpiphp_ibm.c +++ b/drivers/pci/hotplug/acpiphp_ibm.c @@ -35,7 +35,6 @@ #include <linux/moduleparam.h> #include "acpiphp.h" -#include "pci_hotplug.h" #define DRIVER_VERSION "1.0.1" #define DRIVER_AUTHOR "Irene Zubarev <zubarev@us.ibm.com>, Vernon Mauery <vernux@us.ibm.com>" diff --git a/drivers/pci/hotplug/cpci_hotplug_core.c b/drivers/pci/hotplug/cpci_hotplug_core.c index d06ab40..6845515 100644 --- a/drivers/pci/hotplug/cpci_hotplug_core.c +++ b/drivers/pci/hotplug/cpci_hotplug_core.c @@ -29,12 +29,12 @@ #include <linux/kernel.h> #include <linux/slab.h> #include <linux/pci.h> +#include <linux/pci_hotplug.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/smp_lock.h> #include <asm/atomic.h> #include <linux/delay.h> -#include "pci_hotplug.h" #include "cpci_hotplug.h" #define DRIVER_AUTHOR "Scott Murray <scottm@somanetworks.com>" diff --git a/drivers/pci/hotplug/cpci_hotplug_pci.c b/drivers/pci/hotplug/cpci_hotplug_pci.c index 4afcaff..7b1beaa 100644 --- a/drivers/pci/hotplug/cpci_hotplug_pci.c +++ b/drivers/pci/hotplug/cpci_hotplug_pci.c @@ -26,9 +26,9 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/pci.h> +#include <linux/pci_hotplug.h> #include <linux/proc_fs.h> #include "../pci.h" -#include "pci_hotplug.h" #include "cpci_hotplug.h" #define MY_NAME "cpci_hotplug" diff --git a/drivers/pci/hotplug/cpcihp_generic.c b/drivers/pci/hotplug/cpcihp_generic.c index e847f0d..f3852a6 100644 --- a/drivers/pci/hotplug/cpcihp_generic.c +++ b/drivers/pci/hotplug/cpcihp_generic.c @@ -84,7 +84,7 @@ static int __init validate_parameters(void) if(!bridge) { info("not configured, disabling."); - return 1; + return -EINVAL; } str = bridge; if(!*str) @@ -147,7 +147,7 @@ static int __init cpcihp_generic_init(void) info(DRIVER_DESC " version: " DRIVER_VERSION); status = validate_parameters(); - if(status != 0) + if (status) return status; r = request_region(port, 1, "#ENUM hotswap signal register"); diff --git a/drivers/pci/hotplug/cpqphp.h b/drivers/pci/hotplug/cpqphp.h index ea040c3..298ad7f 100644 --- a/drivers/pci/hotplug/cpqphp.h +++ b/drivers/pci/hotplug/cpqphp.h @@ -28,7 +28,6 @@ #ifndef _CPQPHP_H #define _CPQPHP_H -#include "pci_hotplug.h" #include <linux/interrupt.h> #include <asm/io.h> /* for read? and write? functions */ #include <linux/delay.h> /* for delays */ diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c index 1fc2599..5617cfd 100644 --- a/drivers/pci/hotplug/cpqphp_core.c +++ b/drivers/pci/hotplug/cpqphp_core.c @@ -37,6 +37,7 @@ #include <linux/slab.h> #include <linux/workqueue.h> #include <linux/pci.h> +#include <linux/pci_hotplug.h> #include <linux/init.h> #include <linux/interrupt.h> diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c index 3ec2ad7..79ff6b4 100644 --- a/drivers/pci/hotplug/cpqphp_ctrl.c +++ b/drivers/pci/hotplug/cpqphp_ctrl.c @@ -36,6 +36,7 @@ #include <linux/wait.h> #include <linux/smp_lock.h> #include <linux/pci.h> +#include <linux/pci_hotplug.h> #include "cpqphp.h" static u32 configure_new_device(struct controller* ctrl, struct pci_func *func, diff --git a/drivers/pci/hotplug/cpqphp_nvram.c b/drivers/pci/hotplug/cpqphp_nvram.c index cf08789..298a6cf 100644 --- a/drivers/pci/hotplug/cpqphp_nvram.c +++ b/drivers/pci/hotplug/cpqphp_nvram.c @@ -33,6 +33,7 @@ #include <linux/slab.h> #include <linux/workqueue.h> #include <linux/pci.h> +#include <linux/pci_hotplug.h> #include <linux/init.h> #include <asm/uaccess.h> #include "cpqphp.h" diff --git a/drivers/pci/hotplug/cpqphp_pci.c b/drivers/pci/hotplug/cpqphp_pci.c index 0d96889..fc7c74d 100644 --- a/drivers/pci/hotplug/cpqphp_pci.c +++ b/drivers/pci/hotplug/cpqphp_pci.c @@ -33,6 +33,7 @@ #include <linux/workqueue.h> #include <linux/proc_fs.h> #include <linux/pci.h> +#include <linux/pci_hotplug.h> #include "../pci.h" #include "cpqphp.h" #include "cpqphp_nvram.h" diff --git a/drivers/pci/hotplug/cpqphp_sysfs.c b/drivers/pci/hotplug/cpqphp_sysfs.c index 5bab666..634f74d 100644 --- a/drivers/pci/hotplug/cpqphp_sysfs.c +++ b/drivers/pci/hotplug/cpqphp_sysfs.c @@ -32,6 +32,7 @@ #include <linux/proc_fs.h> #include <linux/workqueue.h> #include <linux/pci.h> +#include <linux/pci_hotplug.h> #include <linux/debugfs.h> #include "cpqphp.h" diff --git a/drivers/pci/hotplug/fakephp.c b/drivers/pci/hotplug/fakephp.c index 05a4f0f..e27907c 100644 --- a/drivers/pci/hotplug/fakephp.c +++ b/drivers/pci/hotplug/fakephp.c @@ -35,10 +35,10 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/pci.h> +#include <linux/pci_hotplug.h> #include <linux/init.h> #include <linux/string.h> #include <linux/slab.h> -#include "pci_hotplug.h" #include "../pci.h" #if !defined(MODULE) @@ -181,7 +181,9 @@ static void pci_rescan_slot(struct pci_dev *temp) if (!pci_read_config_byte(temp, PCI_HEADER_TYPE, &hdr_type)) { temp->hdr_type = hdr_type & 0x7f; - if (!pci_find_slot(bus->number, temp->devfn)) { + if ((dev = pci_get_slot(bus, temp->devfn)) != NULL) + pci_dev_put(dev); + else { dev = pci_scan_single_device(bus, temp->devfn); if (dev) { dbg("New device on %s function %x:%x\n", @@ -205,7 +207,9 @@ static void pci_rescan_slot(struct pci_dev *temp) continue; temp->hdr_type = hdr_type & 0x7f; - if (!pci_find_slot(bus->number, temp->devfn)) { + if ((dev = pci_get_slot(bus, temp->devfn)) != NULL) + pci_dev_put(dev); + else { dev = pci_scan_single_device(bus, temp->devfn); if (dev) { dbg("New device on %s function %x:%x\n", @@ -305,7 +309,7 @@ static int disable_slot(struct hotplug_slot *slot) /* search for subfunctions and disable them first */ if (!(dslot->dev->devfn & 7)) { for (func = 1; func < 8; func++) { - dev = pci_find_slot(dslot->dev->bus->number, + dev = pci_get_slot(dslot->dev->bus, dslot->dev->devfn + func); if (dev) { hslot = get_slot_from_dev(dev); @@ -315,6 +319,7 @@ static int disable_slot(struct hotplug_slot *slot) err("Hotplug slot not found for subfunction of PCI device\n"); return -ENODEV; } + pci_dev_put(dev); } else dbg("No device in slot found\n"); } diff --git a/drivers/pci/hotplug/ibmphp.h b/drivers/pci/hotplug/ibmphp.h index dba6d8c..612d963 100644 --- a/drivers/pci/hotplug/ibmphp.h +++ b/drivers/pci/hotplug/ibmphp.h @@ -30,7 +30,7 @@ * */ -#include "pci_hotplug.h" +#include <linux/pci_hotplug.h> extern int ibmphp_debug; diff --git a/drivers/pci/hotplug/ibmphp_hpc.c b/drivers/pci/hotplug/ibmphp_hpc.c index c3ac98a..f55ac38 100644 --- a/drivers/pci/hotplug/ibmphp_hpc.c +++ b/drivers/pci/hotplug/ibmphp_hpc.c @@ -531,7 +531,7 @@ static u8 hpc_readcmdtoindex (u8 cmd, u8 index) * * Action: issue a READ command to HPC * -* Input: pslot - can not be NULL for READ_ALLSTAT +* Input: pslot - cannot be NULL for READ_ALLSTAT * pstatus - can be NULL for READ_ALLSTAT * * Return 0 or error codes diff --git a/drivers/pci/hotplug/ibmphp_pci.c b/drivers/pci/hotplug/ibmphp_pci.c index d87a9e3..d8f05d7 100644 --- a/drivers/pci/hotplug/ibmphp_pci.c +++ b/drivers/pci/hotplug/ibmphp_pci.c @@ -1371,12 +1371,12 @@ static int unconfigure_boot_bridge (u8 busno, u8 device, u8 function) } bus = ibmphp_find_res_bus (sec_number); - debug ("bus->busno is %x\n", bus->busno); - debug ("sec_number is %x\n", sec_number); if (!bus) { err ("cannot find Bus structure for the bridged device\n"); return -EINVAL; } + debug("bus->busno is %x\n", bus->busno); + debug("sec_number is %x\n", sec_number); ibmphp_remove_bus (bus, busno); diff --git a/drivers/pci/hotplug/pci_hotplug.h b/drivers/pci/hotplug/pci_hotplug.h deleted file mode 100644 index 772523d..0000000 --- a/drivers/pci/hotplug/pci_hotplug.h +++ /dev/null @@ -1,236 +0,0 @@ -/* - * PCI HotPlug Core Functions - * - * Copyright (C) 1995,2001 Compaq Computer Corporation - * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com) - * Copyright (C) 2001 IBM Corp. - * - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for more - * details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Send feedback to <greg@kroah.com> - * - */ -#ifndef _PCI_HOTPLUG_H -#define _PCI_HOTPLUG_H - - -/* These values come from the PCI Hotplug Spec */ -enum pci_bus_speed { - PCI_SPEED_33MHz = 0x00, - PCI_SPEED_66MHz = 0x01, - PCI_SPEED_66MHz_PCIX = 0x02, - PCI_SPEED_100MHz_PCIX = 0x03, - PCI_SPEED_133MHz_PCIX = 0x04, - PCI_SPEED_66MHz_PCIX_ECC = 0x05, - PCI_SPEED_100MHz_PCIX_ECC = 0x06, - PCI_SPEED_133MHz_PCIX_ECC = 0x07, - PCI_SPEED_66MHz_PCIX_266 = 0x09, - PCI_SPEED_100MHz_PCIX_266 = 0x0a, - PCI_SPEED_133MHz_PCIX_266 = 0x0b, - PCI_SPEED_66MHz_PCIX_533 = 0x11, - PCI_SPEED_100MHz_PCIX_533 = 0x12, - PCI_SPEED_133MHz_PCIX_533 = 0x13, - PCI_SPEED_UNKNOWN = 0xff, -}; - -/* These values come from the PCI Express Spec */ -enum pcie_link_width { - PCIE_LNK_WIDTH_RESRV = 0x00, - PCIE_LNK_X1 = 0x01, - PCIE_LNK_X2 = 0x02, - PCIE_LNK_X4 = 0x04, - PCIE_LNK_X8 = 0x08, - PCIE_LNK_X12 = 0x0C, - PCIE_LNK_X16 = 0x10, - PCIE_LNK_X32 = 0x20, - PCIE_LNK_WIDTH_UNKNOWN = 0xFF, -}; - -enum pcie_link_speed { - PCIE_2PT5GB = 0x14, - PCIE_LNK_SPEED_UNKNOWN = 0xFF, -}; - -struct hotplug_slot; -struct hotplug_slot_attribute { - struct attribute attr; - ssize_t (*show)(struct hotplug_slot *, char *); - ssize_t (*store)(struct hotplug_slot *, const char *, size_t); -}; -#define to_hotplug_attr(n) container_of(n, struct hotplug_slot_attribute, attr); - -/** - * struct hotplug_slot_ops -the callbacks that the hotplug pci core can use - * @owner: The module owner of this structure - * @enable_slot: Called when the user wants to enable a specific pci slot - * @disable_slot: Called when the user wants to disable a specific pci slot - * @set_attention_status: Called to set the specific slot's attention LED to - * the specified value - * @hardware_test: Called to run a specified hardware test on the specified - * slot. - * @get_power_status: Called to get the current power status of a slot. - * If this field is NULL, the value passed in the struct hotplug_slot_info - * will be used when this value is requested by a user. - * @get_attention_status: Called to get the current attention status of a slot. - * If this field is NULL, the value passed in the struct hotplug_slot_info - * will be used when this value is requested by a user. - * @get_latch_status: Called to get the current latch status of a slot. - * If this field is NULL, the value passed in the struct hotplug_slot_info - * will be used when this value is requested by a user. - * @get_adapter_status: Called to get see if an adapter is present in the slot or not. - * If this field is NULL, the value passed in the struct hotplug_slot_info - * will be used when this value is requested by a user. - * @get_address: Called to get pci address of a slot. - * If this field is NULL, the value passed in the struct hotplug_slot_info - * will be used when this value is requested by a user. - * @get_max_bus_speed: Called to get the max bus speed for a slot. - * If this field is NULL, the value passed in the struct hotplug_slot_info - * will be used when this value is requested by a user. - * @get_cur_bus_speed: Called to get the current bus speed for a slot. - * If this field is NULL, the value passed in the struct hotplug_slot_info - * will be used when this value is requested by a user. - * - * The table of function pointers that is passed to the hotplug pci core by a - * hotplug pci driver. These functions are called by the hotplug pci core when - * the user wants to do something to a specific slot (query it for information, - * set an LED, enable / disable power, etc.) - */ -struct hotplug_slot_ops { - struct module *owner; - int (*enable_slot) (struct hotplug_slot *slot); - int (*disable_slot) (struct hotplug_slot *slot); - int (*set_attention_status) (struct hotplug_slot *slot, u8 value); - int (*hardware_test) (struct hotplug_slot *slot, u32 value); - int (*get_power_status) (struct hotplug_slot *slot, u8 *value); - int (*get_attention_status) (struct hotplug_slot *slot, u8 *value); - int (*get_latch_status) (struct hotplug_slot *slot, u8 *value); - int (*get_adapter_status) (struct hotplug_slot *slot, u8 *value); - int (*get_address) (struct hotplug_slot *slot, u32 *value); - int (*get_max_bus_speed) (struct hotplug_slot *slot, enum pci_bus_speed *value); - int (*get_cur_bus_speed) (struct hotplug_slot *slot, enum pci_bus_speed *value); -}; - -/** - * struct hotplug_slot_info - used to notify the hotplug pci core of the state of the slot - * @power: if power is enabled or not (1/0) - * @attention_status: if the attention light is enabled or not (1/0) - * @latch_status: if the latch (if any) is open or closed (1/0) - * @adapter_present: if there is a pci board present in the slot or not (1/0) - * @address: (domain << 16 | bus << 8 | dev) - * - * Used to notify the hotplug pci core of the status of a specific slot. - */ -struct hotplug_slot_info { - u8 power_status; - u8 attention_status; - u8 latch_status; - u8 adapter_status; - u32 address; - enum pci_bus_speed max_bus_speed; - enum pci_bus_speed cur_bus_speed; -}; - -/** - * struct hotplug_slot - used to register a physical slot with the hotplug pci core - * @name: the name of the slot being registered. This string must - * be unique amoung slots registered on this system. - * @ops: pointer to the &struct hotplug_slot_ops to be used for this slot - * @info: pointer to the &struct hotplug_slot_info for the initial values for - * this slot. - * @release: called during pci_hp_deregister to free memory allocated in a - * hotplug_slot structure. - * @private: used by the hotplug pci controller driver to store whatever it - * needs. - */ -struct hotplug_slot { - char *name; - struct hotplug_slot_ops *ops; - struct hotplug_slot_info *info; - void (*release) (struct hotplug_slot *slot); - void *private; - - /* Variables below this are for use only by the hotplug pci core. */ - struct list_head slot_list; - struct kobject kobj; -}; -#define to_hotplug_slot(n) container_of(n, struct hotplug_slot, kobj) - -extern int pci_hp_register (struct hotplug_slot *slot); -extern int pci_hp_deregister (struct hotplug_slot *slot); -extern int __must_check pci_hp_change_slot_info (struct hotplug_slot *slot, - struct hotplug_slot_info *info); -extern struct subsystem pci_hotplug_slots_subsys; - -/* PCI Setting Record (Type 0) */ -struct hpp_type0 { - u32 revision; - u8 cache_line_size; - u8 latency_timer; - u8 enable_serr; - u8 enable_perr; -}; - -/* PCI-X Setting Record (Type 1) */ -struct hpp_type1 { - u32 revision; - u8 max_mem_read; - u8 avg_max_split; - u16 tot_max_split; -}; - -/* PCI Express Setting Record (Type 2) */ -struct hpp_type2 { - u32 revision; - u32 unc_err_mask_and; - u32 unc_err_mask_or; - u32 unc_err_sever_and; - u32 unc_err_sever_or; - u32 cor_err_mask_and; - u32 cor_err_mask_or; - u32 adv_err_cap_and; - u32 adv_err_cap_or; - u16 pci_exp_devctl_and; - u16 pci_exp_devctl_or; - u16 pci_exp_lnkctl_and; - u16 pci_exp_lnkctl_or; - u32 sec_unc_err_sever_and; - u32 sec_unc_err_sever_or; - u32 sec_unc_err_mask_and; - u32 sec_unc_err_mask_or; -}; - -struct hotplug_params { - struct hpp_type0 *t0; /* Type0: NULL if not available */ - struct hpp_type1 *t1; /* Type1: NULL if not available */ - struct hpp_type2 *t2; /* Type2: NULL if not available */ - struct hpp_type0 type0_data; - struct hpp_type1 type1_data; - struct hpp_type2 type2_data; -}; - -#ifdef CONFIG_ACPI -#include <acpi/acpi.h> -#include <acpi/acpi_bus.h> -#include <acpi/actypes.h> -extern acpi_status acpi_run_oshp(acpi_handle handle); -extern acpi_status acpi_get_hp_params_from_firmware(struct pci_bus *bus, - struct hotplug_params *hpp); -int acpi_root_bridge(acpi_handle handle); -#endif -#endif - diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c index e2823ea..f5d632e 100644 --- a/drivers/pci/hotplug/pci_hotplug_core.c +++ b/drivers/pci/hotplug/pci_hotplug_core.c @@ -21,9 +21,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - * Send feedback to <greg@kroah.com> - * - * Filesystem portion based on work done by Pat Mochel on ddfs/driverfs + * Send feedback to <kristen.c.accardi@intel.com> * */ @@ -32,6 +30,8 @@ #include <linux/kernel.h> #include <linux/types.h> #include <linux/list.h> +#include <linux/kobject.h> +#include <linux/sysfs.h> #include <linux/pagemap.h> #include <linux/slab.h> #include <linux/smp_lock.h> @@ -39,11 +39,8 @@ #include <linux/mount.h> #include <linux/namei.h> #include <linux/pci.h> +#include <linux/pci_hotplug.h> #include <asm/uaccess.h> -#include <linux/kobject.h> -#include <linux/sysfs.h> -#include "pci_hotplug.h" - #define MY_NAME "pci_hotplug" diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h index eaea9d3..4fb12fc 100644 --- a/drivers/pci/hotplug/pciehp.h +++ b/drivers/pci/hotplug/pciehp.h @@ -31,11 +31,11 @@ #include <linux/types.h> #include <linux/pci.h> +#include <linux/pci_hotplug.h> #include <linux/delay.h> #include <linux/sched.h> /* signal_pending() */ #include <linux/pcieport_if.h> #include <linux/mutex.h> -#include "pci_hotplug.h" #define MY_NAME "pciehp" @@ -92,6 +92,7 @@ struct php_ctlr_state_s { struct controller { struct controller *next; struct mutex crit_sect; /* critical section mutex */ + struct mutex ctrl_lock; /* controller lock */ struct php_ctlr_state_s *hpc_ctlr_handle; /* HPC controller handle */ int num_slots; /* Number of slots on ctlr */ int slot_num_inc; /* 1 or -1 */ @@ -166,10 +167,10 @@ struct controller { * error Messages */ #define msg_initialization_err "Initialization failure, error=%d\n" -#define msg_button_on "PCI slot #%d - powering on due to button press.\n" -#define msg_button_off "PCI slot #%d - powering off due to button press.\n" -#define msg_button_cancel "PCI slot #%d - action canceled due to button press.\n" -#define msg_button_ignore "PCI slot #%d - button press ignored. (action in progress...)\n" +#define msg_button_on "PCI slot #%s - powering on due to button press.\n" +#define msg_button_off "PCI slot #%s - powering off due to button press.\n" +#define msg_button_cancel "PCI slot #%s - action canceled due to button press.\n" +#define msg_button_ignore "PCI slot #%s - button press ignored. (action in progress...)\n" /* controller functions */ extern int pciehp_event_start_thread (void); diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index c67b7c3..f13f313 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -448,7 +448,7 @@ static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_ } /* Wait for exclusive access to hardware */ - mutex_lock(&ctrl->crit_sect); + mutex_lock(&ctrl->ctrl_lock); t_slot->hpc_ops->get_adapter_status(t_slot, &value); /* Check if slot is occupied */ @@ -456,7 +456,7 @@ static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_ rc = t_slot->hpc_ops->power_off_slot(t_slot); /* Power off slot if not occupied*/ if (rc) { /* Done with exclusive hardware access */ - mutex_unlock(&ctrl->crit_sect); + mutex_unlock(&ctrl->ctrl_lock); goto err_out_free_ctrl_slot; } else /* Wait for the command to complete */ @@ -464,7 +464,7 @@ static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_ } /* Done with exclusive hardware access */ - mutex_unlock(&ctrl->crit_sect); + mutex_unlock(&ctrl->ctrl_lock); return 0; @@ -521,14 +521,9 @@ static void __exit unload_pciehpd(void) } -static int hpdriver_context = 0; - static void pciehp_remove (struct pcie_device *device) { - printk("%s ENTRY\n", __FUNCTION__); - printk("%s -> Call free_irq for irq = %d\n", - __FUNCTION__, device->irq); - free_irq(device->irq, &hpdriver_context); + /* XXX - Needs to be adapted to device driver model */ } #ifdef CONFIG_PM diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c index 41290a1..372c63e 100644 --- a/drivers/pci/hotplug/pciehp_ctrl.c +++ b/drivers/pci/hotplug/pciehp_ctrl.c @@ -43,6 +43,11 @@ static int event_finished; static unsigned long pushbutton_pending; /* = 0 */ static unsigned long surprise_rm_pending; /* = 0 */ +static inline char *slot_name(struct slot *p_slot) +{ + return p_slot->hotplug_slot->name; +} + u8 pciehp_handle_attention_button(u8 hp_slot, void *inst_id) { struct controller *ctrl = (struct controller *) inst_id; @@ -68,7 +73,7 @@ u8 pciehp_handle_attention_button(u8 hp_slot, void *inst_id) /* * Button pressed - See if need to TAKE ACTION!!! */ - info("Button pressed on Slot(%d)\n", ctrl->first_slot + hp_slot); + info("Button pressed on Slot(%s)\n", slot_name(p_slot)); taskInfo->event_type = INT_BUTTON_PRESS; if ((p_slot->state == BLINKINGON_STATE) @@ -78,7 +83,7 @@ u8 pciehp_handle_attention_button(u8 hp_slot, void *inst_id) * or hot-remove */ taskInfo->event_type = INT_BUTTON_CANCEL; - info("Button cancel on Slot(%d)\n", ctrl->first_slot + hp_slot); + info("Button cancel on Slot(%s)\n", slot_name(p_slot)); } else if ((p_slot->state == POWERON_STATE) || (p_slot->state == POWEROFF_STATE)) { /* Ignore if the slot is on power-on or power-off state; this @@ -86,7 +91,7 @@ u8 pciehp_handle_attention_button(u8 hp_slot, void *inst_id) * hot-remove is undergoing */ taskInfo->event_type = INT_BUTTON_IGNORE; - info("Button ignore on Slot(%d)\n", ctrl->first_slot + hp_slot); + info("Button ignore on Slot(%s)\n", slot_name(p_slot)); } if (rc) @@ -122,13 +127,13 @@ u8 pciehp_handle_switch_change(u8 hp_slot, void *inst_id) /* * Switch opened */ - info("Latch open on Slot(%d)\n", ctrl->first_slot + hp_slot); + info("Latch open on Slot(%s)\n", slot_name(p_slot)); taskInfo->event_type = INT_SWITCH_OPEN; } else { /* * Switch closed */ - info("Latch close on Slot(%d)\n", ctrl->first_slot + hp_slot); + info("Latch close on Slot(%s)\n", slot_name(p_slot)); taskInfo->event_type = INT_SWITCH_CLOSE; } @@ -166,13 +171,13 @@ u8 pciehp_handle_presence_change(u8 hp_slot, void *inst_id) /* * Card Present */ - info("Card present on Slot(%d)\n", ctrl->first_slot + hp_slot); + info("Card present on Slot(%s)\n", slot_name(p_slot)); taskInfo->event_type = INT_PRESENCE_ON; } else { /* * Not Present */ - info("Card not present on Slot(%d)\n", ctrl->first_slot + hp_slot); + info("Card not present on Slot(%s)\n", slot_name(p_slot)); taskInfo->event_type = INT_PRESENCE_OFF; } @@ -206,13 +211,13 @@ u8 pciehp_handle_power_fault(u8 hp_slot, void *inst_id) /* * power fault Cleared */ - info("Power fault cleared on Slot(%d)\n", ctrl->first_slot + hp_slot); + info("Power fault cleared on Slot(%s)\n", slot_name(p_slot)); taskInfo->event_type = INT_POWER_FAULT_CLEAR; } else { /* * power fault */ - info("Power fault on Slot(%d)\n", ctrl->first_slot + hp_slot); + info("Power fault on Slot(%s)\n", slot_name(p_slot)); taskInfo->event_type = INT_POWER_FAULT; info("power fault bit %x set\n", hp_slot); } @@ -229,13 +234,13 @@ u8 pciehp_handle_power_fault(u8 hp_slot, void *inst_id) static void set_slot_off(struct controller *ctrl, struct slot * pslot) { /* Wait for exclusive access to hardware */ - mutex_lock(&ctrl->crit_sect); + mutex_lock(&ctrl->ctrl_lock); /* turn off slot, turn on Amber LED, turn off Green LED if supported*/ if (POWER_CTRL(ctrl->ctrlcap)) { if (pslot->hpc_ops->power_off_slot(pslot)) { err("%s: Issue of Slot Power Off command failed\n", __FUNCTION__); - mutex_unlock(&ctrl->crit_sect); + mutex_unlock(&ctrl->ctrl_lock); return; } wait_for_ctrl_irq (ctrl); @@ -249,14 +254,14 @@ static void set_slot_off(struct controller *ctrl, struct slot * pslot) if (ATTN_LED(ctrl->ctrlcap)) { if (pslot->hpc_ops->set_attention_status(pslot, 1)) { err("%s: Issue of Set Attention Led command failed\n", __FUNCTION__); - mutex_unlock(&ctrl->crit_sect); + mutex_unlock(&ctrl->ctrl_lock); return; } wait_for_ctrl_irq (ctrl); } /* Done with exclusive hardware access */ - mutex_unlock(&ctrl->crit_sect); + mutex_unlock(&ctrl->ctrl_lock); } /** @@ -279,13 +284,13 @@ static int board_added(struct slot *p_slot) ctrl->slot_device_offset, hp_slot); /* Wait for exclusive access to hardware */ - mutex_lock(&ctrl->crit_sect); + mutex_lock(&ctrl->ctrl_lock); if (POWER_CTRL(ctrl->ctrlcap)) { /* Power on slot */ rc = p_slot->hpc_ops->power_on_slot(p_slot); if (rc) { - mutex_unlock(&ctrl->crit_sect); + mutex_unlock(&ctrl->ctrl_lock); return -1; } @@ -301,7 +306,7 @@ static int board_added(struct slot *p_slot) } /* Done with exclusive hardware access */ - mutex_unlock(&ctrl->crit_sect); + mutex_unlock(&ctrl->ctrl_lock); /* Wait for ~1 second */ wait_for_ctrl_irq (ctrl); @@ -335,7 +340,7 @@ static int board_added(struct slot *p_slot) pci_fixup_device(pci_fixup_final, ctrl->pci_dev); if (PWR_LED(ctrl->ctrlcap)) { /* Wait for exclusive access to hardware */ - mutex_lock(&ctrl->crit_sect); + mutex_lock(&ctrl->ctrl_lock); p_slot->hpc_ops->green_led_on(p_slot); @@ -343,7 +348,7 @@ static int board_added(struct slot *p_slot) wait_for_ctrl_irq (ctrl); /* Done with exclusive hardware access */ - mutex_unlock(&ctrl->crit_sect); + mutex_unlock(&ctrl->ctrl_lock); } return 0; @@ -375,14 +380,14 @@ static int remove_board(struct slot *p_slot) dbg("In %s, hp_slot = %d\n", __FUNCTION__, hp_slot); /* Wait for exclusive access to hardware */ - mutex_lock(&ctrl->crit_sect); + mutex_lock(&ctrl->ctrl_lock); if (POWER_CTRL(ctrl->ctrlcap)) { /* power off slot */ rc = p_slot->hpc_ops->power_off_slot(p_slot); if (rc) { err("%s: Issue of Slot Disable command failed\n", __FUNCTION__); - mutex_unlock(&ctrl->crit_sect); + mutex_unlock(&ctrl->ctrl_lock); return rc; } /* Wait for the command to complete */ @@ -398,7 +403,7 @@ static int remove_board(struct slot *p_slot) } /* Done with exclusive hardware access */ - mutex_unlock(&ctrl->crit_sect); + mutex_unlock(&ctrl->ctrl_lock); return 0; } @@ -445,7 +450,7 @@ static void pciehp_pushbutton_thread(unsigned long slot) if (pciehp_enable_slot(p_slot) && PWR_LED(p_slot->ctrl->ctrlcap)) { /* Wait for exclusive access to hardware */ - mutex_lock(&p_slot->ctrl->crit_sect); + mutex_lock(&p_slot->ctrl->ctrl_lock); p_slot->hpc_ops->green_led_off(p_slot); @@ -453,7 +458,7 @@ static void pciehp_pushbutton_thread(unsigned long slot) wait_for_ctrl_irq (p_slot->ctrl); /* Done with exclusive hardware access */ - mutex_unlock(&p_slot->ctrl->crit_sect); + mutex_unlock(&p_slot->ctrl->ctrl_lock); } p_slot->state = STATIC_STATE; } @@ -495,7 +500,7 @@ static void pciehp_surprise_rm_thread(unsigned long slot) if (pciehp_enable_slot(p_slot) && PWR_LED(p_slot->ctrl->ctrlcap)) { /* Wait for exclusive access to hardware */ - mutex_lock(&p_slot->ctrl->crit_sect); + mutex_lock(&p_slot->ctrl->ctrl_lock); p_slot->hpc_ops->green_led_off(p_slot); @@ -503,7 +508,7 @@ static void pciehp_surprise_rm_thread(unsigned long slot) wait_for_ctrl_irq (p_slot->ctrl); /* Done with exclusive hardware access */ - mutex_unlock(&p_slot->ctrl->crit_sect); + mutex_unlock(&p_slot->ctrl->ctrl_lock); } p_slot->state = STATIC_STATE; } @@ -616,7 +621,7 @@ static void interrupt_event_handler(struct controller *ctrl) switch (p_slot->state) { case BLINKINGOFF_STATE: /* Wait for exclusive access to hardware */ - mutex_lock(&ctrl->crit_sect); + mutex_lock(&ctrl->ctrl_lock); if (PWR_LED(ctrl->ctrlcap)) { p_slot->hpc_ops->green_led_on(p_slot); @@ -630,11 +635,11 @@ static void interrupt_event_handler(struct controller *ctrl) wait_for_ctrl_irq (ctrl); } /* Done with exclusive hardware access */ - mutex_unlock(&ctrl->crit_sect); + mutex_unlock(&ctrl->ctrl_lock); break; case BLINKINGON_STATE: /* Wait for exclusive access to hardware */ - mutex_lock(&ctrl->crit_sect); + mutex_lock(&ctrl->ctrl_lock); if (PWR_LED(ctrl->ctrlcap)) { p_slot->hpc_ops->green_led_off(p_slot); @@ -647,14 +652,14 @@ static void interrupt_event_handler(struct controller *ctrl) wait_for_ctrl_irq (ctrl); } /* Done with exclusive hardware access */ - mutex_unlock(&ctrl->crit_sect); + mutex_unlock(&ctrl->ctrl_lock); break; default: warn("Not a valid state\n"); return; } - info(msg_button_cancel, p_slot->number); + info(msg_button_cancel, slot_name(p_slot)); p_slot->state = STATIC_STATE; } /* ***********Button Pressed (No action on 1st press...) */ @@ -667,16 +672,16 @@ static void interrupt_event_handler(struct controller *ctrl) /* slot is on */ dbg("slot is on\n"); p_slot->state = BLINKINGOFF_STATE; - info(msg_button_off, p_slot->number); + info(msg_button_off, slot_name(p_slot)); } else { /* slot is off */ dbg("slot is off\n"); p_slot->state = BLINKINGON_STATE; - info(msg_button_on, p_slot->number); + info(msg_button_on, slot_name(p_slot)); } /* Wait for exclusive access to hardware */ - mutex_lock(&ctrl->crit_sect); + mutex_lock(&ctrl->ctrl_lock); /* blink green LED and turn off amber */ if (PWR_LED(ctrl->ctrlcap)) { @@ -693,7 +698,7 @@ static void interrupt_event_handler(struct controller *ctrl) } /* Done with exclusive hardware access */ - mutex_unlock(&ctrl->crit_sect); + mutex_unlock(&ctrl->ctrl_lock); init_timer(&p_slot->task_event); p_slot->task_event.expires = jiffies + 5 * HZ; /* 5 second delay */ @@ -708,7 +713,7 @@ static void interrupt_event_handler(struct controller *ctrl) if (POWER_CTRL(ctrl->ctrlcap)) { dbg("power fault\n"); /* Wait for exclusive access to hardware */ - mutex_lock(&ctrl->crit_sect); + mutex_lock(&ctrl->ctrl_lock); if (ATTN_LED(ctrl->ctrlcap)) { p_slot->hpc_ops->set_attention_status(p_slot, 1); @@ -721,7 +726,7 @@ static void interrupt_event_handler(struct controller *ctrl) } /* Done with exclusive hardware access */ - mutex_unlock(&ctrl->crit_sect); + mutex_unlock(&ctrl->ctrl_lock); } } /***********SURPRISE REMOVAL********************/ @@ -760,14 +765,16 @@ int pciehp_enable_slot(struct slot *p_slot) rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus); if (rc || !getstatus) { - info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number); + info("%s: no adapter on slot(%s)\n", __FUNCTION__, + slot_name(p_slot)); mutex_unlock(&p_slot->ctrl->crit_sect); return -ENODEV; } if (MRL_SENS(p_slot->ctrl->ctrlcap)) { rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); if (rc || getstatus) { - info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number); + info("%s: latch open on slot(%s)\n", __FUNCTION__, + slot_name(p_slot)); mutex_unlock(&p_slot->ctrl->crit_sect); return -ENODEV; } @@ -776,12 +783,12 @@ int pciehp_enable_slot(struct slot *p_slot) if (POWER_CTRL(p_slot->ctrl->ctrlcap)) { rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus); if (rc || getstatus) { - info("%s: already enabled on slot(%x)\n", __FUNCTION__, p_slot->number); + info("%s: already enabled on slot(%s)\n", __FUNCTION__, + slot_name(p_slot)); mutex_unlock(&p_slot->ctrl->crit_sect); return -EINVAL; } } - mutex_unlock(&p_slot->ctrl->crit_sect); p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); @@ -790,9 +797,9 @@ int pciehp_enable_slot(struct slot *p_slot) p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); } - if (p_slot) - update_slot_info(p_slot); + update_slot_info(p_slot); + mutex_unlock(&p_slot->ctrl->crit_sect); return rc; } @@ -811,7 +818,8 @@ int pciehp_disable_slot(struct slot *p_slot) if (!HP_SUPR_RM(p_slot->ctrl->ctrlcap)) { ret = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus); if (ret || !getstatus) { - info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number); + info("%s: no adapter on slot(%s)\n", __FUNCTION__, + slot_name(p_slot)); mutex_unlock(&p_slot->ctrl->crit_sect); return -ENODEV; } @@ -820,7 +828,8 @@ int pciehp_disable_slot(struct slot *p_slot) if (MRL_SENS(p_slot->ctrl->ctrlcap)) { ret = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); if (ret || getstatus) { - info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number); + info("%s: latch open on slot(%s)\n", __FUNCTION__, + slot_name(p_slot)); mutex_unlock(&p_slot->ctrl->crit_sect); return -ENODEV; } @@ -829,16 +838,17 @@ int pciehp_disable_slot(struct slot *p_slot) if (POWER_CTRL(p_slot->ctrl->ctrlcap)) { ret = p_slot->hpc_ops->get_power_status(p_slot, &getstatus); if (ret || !getstatus) { - info("%s: already disabled slot(%x)\n", __FUNCTION__, p_slot->number); + info("%s: already disabled slot(%s)\n", __FUNCTION__, + slot_name(p_slot)); mutex_unlock(&p_slot->ctrl->crit_sect); return -EINVAL; } } - mutex_unlock(&p_slot->ctrl->crit_sect); - ret = remove_board(p_slot); update_slot_info(p_slot); + + mutex_unlock(&p_slot->ctrl->crit_sect); return ret; } diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 703a64a..6d3f580 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -718,8 +718,6 @@ static void hpc_release_ctlr(struct controller *ctrl) if (php_ctlr->irq) { free_irq(php_ctlr->irq, ctrl); php_ctlr->irq = 0; - if (!pcie_mch_quirk) - pci_disable_msi(php_ctlr->pci_dev); } } if (php_ctlr->pci_dev) @@ -1402,6 +1400,8 @@ int pcie_init(struct controller * ctrl, struct pcie_device *dev) pdev->subsystem_vendor, pdev->subsystem_device); mutex_init(&ctrl->crit_sect); + mutex_init(&ctrl->ctrl_lock); + /* setup wait queue */ init_waitqueue_head(&ctrl->queue); diff --git a/drivers/pci/hotplug/pcihp_skeleton.c b/drivers/pci/hotplug/pcihp_skeleton.c index 2b9e10e..50bcd3f 100644 --- a/drivers/pci/hotplug/pcihp_skeleton.c +++ b/drivers/pci/hotplug/pcihp_skeleton.c @@ -33,8 +33,8 @@ #include <linux/kernel.h> #include <linux/slab.h> #include <linux/pci.h> +#include <linux/pci_hotplug.h> #include <linux/init.h> -#include "pci_hotplug.h" #define SLOT_NAME_SIZE 10 struct slot { diff --git a/drivers/pci/hotplug/rpadlpar_core.c b/drivers/pci/hotplug/rpadlpar_core.c index 46825fe..7238346 100644 --- a/drivers/pci/hotplug/rpadlpar_core.c +++ b/drivers/pci/hotplug/rpadlpar_core.c @@ -63,7 +63,7 @@ static struct device_node *find_php_slot_pci_node(char *drc_name, char *type; int rc; - while ((np = of_find_node_by_type(np, "pci"))) { + while ((np = of_find_node_by_name(np, "pci"))) { rc = rpaphp_get_drc_props(np, NULL, &name, &type, NULL); if (rc == 0) if (!strcmp(drc_name, name) && !strcmp(drc_type, type)) diff --git a/drivers/pci/hotplug/rpadlpar_sysfs.c b/drivers/pci/hotplug/rpadlpar_sysfs.c index db69be8..6c5be3f 100644 --- a/drivers/pci/hotplug/rpadlpar_sysfs.c +++ b/drivers/pci/hotplug/rpadlpar_sysfs.c @@ -14,7 +14,7 @@ */ #include <linux/kobject.h> #include <linux/string.h> -#include "pci_hotplug.h" +#include <linux/pci_hotplug.h> #include "rpadlpar.h" #define DLPAR_KOBJ_NAME "control" diff --git a/drivers/pci/hotplug/rpaphp.h b/drivers/pci/hotplug/rpaphp.h index 310b618..2e7accf 100644 --- a/drivers/pci/hotplug/rpaphp.h +++ b/drivers/pci/hotplug/rpaphp.h @@ -28,7 +28,7 @@ #define _PPC64PHP_H #include <linux/pci.h> -#include "pci_hotplug.h" +#include <linux/pci_hotplug.h> #define DR_INDICATOR 9002 #define DR_ENTITY_SENSE 9003 diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c index 7288a3e..71a2cb8 100644 --- a/drivers/pci/hotplug/rpaphp_core.c +++ b/drivers/pci/hotplug/rpaphp_core.c @@ -26,6 +26,7 @@ #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/pci.h> +#include <linux/pci_hotplug.h> #include <linux/slab.h> #include <linux/smp.h> #include <linux/smp_lock.h> @@ -36,7 +37,6 @@ #include "../pci.h" /* for pci_add_new_bus */ /* and pci_do_scan_bus */ #include "rpaphp.h" -#include "pci_hotplug.h" int debug; static struct semaphore rpaphp_sem; @@ -356,7 +356,7 @@ static int __init rpaphp_init(void) info(DRIVER_DESC " version: " DRIVER_VERSION "\n"); init_MUTEX(&rpaphp_sem); - while ((dn = of_find_node_by_type(dn, "pci"))) + while ((dn = of_find_node_by_name(dn, "pci"))) rpaphp_add_slot(dn); return 0; diff --git a/drivers/pci/hotplug/sgi_hotplug.c b/drivers/pci/hotplug/sgi_hotplug.c index f31d83c..5d188c5 100644 --- a/drivers/pci/hotplug/sgi_hotplug.c +++ b/drivers/pci/hotplug/sgi_hotplug.c @@ -13,6 +13,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/pci.h> +#include <linux/pci_hotplug.h> #include <linux/proc_fs.h> #include <linux/types.h> #include <linux/mutex.h> @@ -29,7 +30,6 @@ #include <asm/sn/types.h> #include "../pci.h" -#include "pci_hotplug.h" MODULE_LICENSE("GPL"); MODULE_AUTHOR("SGI (prarit@sgi.com, dickie@sgi.com, habeck@sgi.com)"); @@ -205,21 +205,6 @@ static struct hotplug_slot * sn_hp_destroy(void) return bss_hotplug_slot; } -static void sn_bus_alloc_data(struct pci_dev *dev) -{ - struct pci_bus *subordinate_bus; - struct pci_dev *child; - - sn_pci_fixup_slot(dev); - - /* Recursively sets up the sn_irq_info structs */ - if (dev->subordinate) { - subordinate_bus = dev->subordinate; - list_for_each_entry(child, &subordinate_bus->devices, bus_list) - sn_bus_alloc_data(child); - } -} - static void sn_bus_free_data(struct pci_dev *dev) { struct pci_bus *subordinate_bus; @@ -337,6 +322,11 @@ static int sn_slot_disable(struct hotplug_slot *bss_hotplug_slot, return rc; } +/* + * Power up and configure the slot via a SAL call to PROM. + * Scan slot (and any children), do any platform specific fixup, + * and find device driver. + */ static int enable_slot(struct hotplug_slot *bss_hotplug_slot) { struct slot *slot = bss_hotplug_slot->private; @@ -345,6 +335,7 @@ static int enable_slot(struct hotplug_slot *bss_hotplug_slot) int func, num_funcs; int new_ppb = 0; int rc; + void pcibios_fixup_device_resources(struct pci_dev *); /* Serialize the Linux PCI infrastructure */ mutex_lock(&sn_hotplug_mutex); @@ -367,9 +358,6 @@ static int enable_slot(struct hotplug_slot *bss_hotplug_slot) return -ENODEV; } - sn_pci_controller_fixup(pci_domain_nr(slot->pci_bus), - slot->pci_bus->number, - slot->pci_bus); /* * Map SN resources for all functions on the card * to the Linux PCI interface and tell the drivers @@ -380,6 +368,13 @@ static int enable_slot(struct hotplug_slot *bss_hotplug_slot) PCI_DEVFN(slot->device_num + 1, PCI_FUNC(func))); if (dev) { + /* Need to do slot fixup on PPB before fixup of children + * (PPB's pcidev_info needs to be in pcidev_info list + * before child's SN_PCIDEV_INFO() call to setup + * pdi_host_pcidev_info). + */ + pcibios_fixup_device_resources(dev); + sn_pci_fixup_slot(dev); if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) { unsigned char sec_bus; pci_read_config_byte(dev, PCI_SECONDARY_BUS, @@ -387,12 +382,8 @@ static int enable_slot(struct hotplug_slot *bss_hotplug_slot) new_bus = pci_add_new_bus(dev->bus, dev, sec_bus); pci_scan_child_bus(new_bus); - sn_pci_controller_fixup(pci_domain_nr(new_bus), - new_bus->number, - new_bus); new_ppb = 1; } - sn_bus_alloc_data(dev); pci_dev_put(dev); } } diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index c7103ac..ea2087c 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h @@ -31,12 +31,11 @@ #include <linux/types.h> #include <linux/pci.h> +#include <linux/pci_hotplug.h> #include <linux/delay.h> #include <linux/sched.h> /* signal_pending(), struct timer_list */ #include <linux/mutex.h> -#include "pci_hotplug.h" - #if !defined(MODULE) #define MY_NAME "shpchp" #else @@ -103,7 +102,6 @@ struct controller { u32 cap_offset; unsigned long mmio_base; unsigned long mmio_size; - volatile int cmd_busy; }; diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c index 4d8aee1..83a5226 100644 --- a/drivers/pci/hotplug/shpchp_hpc.c +++ b/drivers/pci/hotplug/shpchp_hpc.c @@ -302,21 +302,51 @@ static void start_int_poll_timer(struct php_ctlr_state_s *php_ctlr, int sec) add_timer(&php_ctlr->int_poll_timer); } +static inline int is_ctrl_busy(struct controller *ctrl) +{ + u16 cmd_status = shpc_readw(ctrl, CMD_STATUS); + return cmd_status & 0x1; +} + +/* + * Returns 1 if SHPC finishes executing a command within 1 sec, + * otherwise returns 0. + */ +static inline int shpc_poll_ctrl_busy(struct controller *ctrl) +{ + int i; + + if (!is_ctrl_busy(ctrl)) + return 1; + + /* Check every 0.1 sec for a total of 1 sec */ + for (i = 0; i < 10; i++) { + msleep(100); + if (!is_ctrl_busy(ctrl)) + return 1; + } + + return 0; +} + static inline int shpc_wait_cmd(struct controller *ctrl) { int retval = 0; - unsigned int timeout_msec = shpchp_poll_mode ? 2000 : 1000; - unsigned long timeout = msecs_to_jiffies(timeout_msec); - int rc = wait_event_interruptible_timeout(ctrl->queue, - !ctrl->cmd_busy, timeout); - if (!rc) { + unsigned long timeout = msecs_to_jiffies(1000); + int rc; + + if (shpchp_poll_mode) + rc = shpc_poll_ctrl_busy(ctrl); + else + rc = wait_event_interruptible_timeout(ctrl->queue, + !is_ctrl_busy(ctrl), timeout); + if (!rc && is_ctrl_busy(ctrl)) { retval = -EIO; - err("Command not completed in %d msec\n", timeout_msec); + err("Command not completed in 1000 msec\n"); } else if (rc < 0) { retval = -EINTR; info("Command was interrupted by a signal\n"); } - ctrl->cmd_busy = 0; return retval; } @@ -327,26 +357,15 @@ static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd) u16 cmd_status; int retval = 0; u16 temp_word; - int i; DBG_ENTER_ROUTINE mutex_lock(&slot->ctrl->cmd_lock); - for (i = 0; i < 10; i++) { - cmd_status = shpc_readw(ctrl, CMD_STATUS); - - if (!(cmd_status & 0x1)) - break; - /* Check every 0.1 sec for a total of 1 sec*/ - msleep(100); - } - - cmd_status = shpc_readw(ctrl, CMD_STATUS); - - if (cmd_status & 0x1) { + if (!shpc_poll_ctrl_busy(ctrl)) { /* After 1 sec and and the controller is still busy */ - err("%s : Controller is still busy after 1 sec.\n", __FUNCTION__); + err("%s : Controller is still busy after 1 sec.\n", + __FUNCTION__); retval = -EBUSY; goto out; } @@ -358,7 +377,6 @@ static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd) /* To make sure the Controller Busy bit is 0 before we send out the * command. */ - slot->ctrl->cmd_busy = 1; shpc_writew(ctrl, CMD, temp_word); /* @@ -908,7 +926,6 @@ static irqreturn_t shpc_isr(int irq, void *dev_id) serr_int &= ~SERR_INTR_RSVDZ_MASK; shpc_writel(ctrl, SERR_INTR_ENABLE, serr_int); - ctrl->cmd_busy = 0; wake_up_interruptible(&ctrl->queue); } @@ -1101,7 +1118,7 @@ int shpc_init(struct controller * ctrl, struct pci_dev * pdev) { struct php_ctlr_state_s *php_ctlr, *p; void *instance_id = ctrl; - int rc, num_slots = 0; + int rc = -1, num_slots = 0; u8 hp_slot; u32 shpc_base_offset; u32 tempdword, slot_reg, slot_config; @@ -1167,11 +1184,15 @@ int shpc_init(struct controller * ctrl, struct pci_dev * pdev) info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n", pdev->vendor, pdev->device, pdev->subsystem_vendor, pdev->subsystem_device); - if (pci_enable_device(pdev)) + rc = pci_enable_device(pdev); + if (rc) { + err("%s: pci_enable_device failed\n", __FUNCTION__); goto abort_free_ctlr; + } if (!request_mem_region(ctrl->mmio_base, ctrl->mmio_size, MY_NAME)) { err("%s: cannot reserve MMIO region\n", __FUNCTION__); + rc = -1; goto abort_free_ctlr; } @@ -1180,6 +1201,7 @@ int shpc_init(struct controller * ctrl, struct pci_dev * pdev) err("%s: cannot remap MMIO region %lx @ %lx\n", __FUNCTION__, ctrl->mmio_size, ctrl->mmio_base); release_mem_region(ctrl->mmio_base, ctrl->mmio_size); + rc = -1; goto abort_free_ctlr; } dbg("%s: php_ctlr->creg %p\n", __FUNCTION__, php_ctlr->creg); @@ -1282,8 +1304,10 @@ int shpc_init(struct controller * ctrl, struct pci_dev * pdev) */ if (atomic_add_return(1, &shpchp_num_controllers) == 1) { shpchp_wq = create_singlethread_workqueue("shpchpd"); - if (!shpchp_wq) - return -ENOMEM; + if (!shpchp_wq) { + rc = -ENOMEM; + goto abort_free_ctlr; + } } /* @@ -1313,8 +1337,10 @@ int shpc_init(struct controller * ctrl, struct pci_dev * pdev) /* We end up here for the many possible ways to fail this API. */ abort_free_ctlr: + if (php_ctlr->creg) + iounmap(php_ctlr->creg); kfree(php_ctlr); abort: DBG_LEAVE_ROUTINE - return -1; + return rc; } diff --git a/drivers/pci/htirq.c b/drivers/pci/htirq.c index 0e27f24..0a8d1cc 100644 --- a/drivers/pci/htirq.c +++ b/drivers/pci/htirq.c @@ -25,97 +25,72 @@ static DEFINE_SPINLOCK(ht_irq_lock); struct ht_irq_cfg { struct pci_dev *dev; + /* Update callback used to cope with buggy hardware */ + ht_irq_update_t *update; unsigned pos; unsigned idx; + struct ht_irq_msg msg; }; -void write_ht_irq_low(unsigned int irq, u32 data) -{ - struct ht_irq_cfg *cfg = get_irq_data(irq); - unsigned long flags; - spin_lock_irqsave(&ht_irq_lock, flags); - pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx); - pci_write_config_dword(cfg->dev, cfg->pos + 4, data); - spin_unlock_irqrestore(&ht_irq_lock, flags); -} -void write_ht_irq_high(unsigned int irq, u32 data) +void write_ht_irq_msg(unsigned int irq, struct ht_irq_msg *msg) { struct ht_irq_cfg *cfg = get_irq_data(irq); unsigned long flags; spin_lock_irqsave(&ht_irq_lock, flags); - pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx + 1); - pci_write_config_dword(cfg->dev, cfg->pos + 4, data); - spin_unlock_irqrestore(&ht_irq_lock, flags); -} - -u32 read_ht_irq_low(unsigned int irq) -{ - struct ht_irq_cfg *cfg = get_irq_data(irq); - unsigned long flags; - u32 data; - spin_lock_irqsave(&ht_irq_lock, flags); - pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx); - pci_read_config_dword(cfg->dev, cfg->pos + 4, &data); + if (cfg->msg.address_lo != msg->address_lo) { + pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx); + pci_write_config_dword(cfg->dev, cfg->pos + 4, msg->address_lo); + } + if (cfg->msg.address_hi != msg->address_hi) { + pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx + 1); + pci_write_config_dword(cfg->dev, cfg->pos + 4, msg->address_hi); + } + if (cfg->update) + cfg->update(cfg->dev, irq, msg); spin_unlock_irqrestore(&ht_irq_lock, flags); - return data; + cfg->msg = *msg; } -u32 read_ht_irq_high(unsigned int irq) +void fetch_ht_irq_msg(unsigned int irq, struct ht_irq_msg *msg) { struct ht_irq_cfg *cfg = get_irq_data(irq); - unsigned long flags; - u32 data; - spin_lock_irqsave(&ht_irq_lock, flags); - pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx + 1); - pci_read_config_dword(cfg->dev, cfg->pos + 4, &data); - spin_unlock_irqrestore(&ht_irq_lock, flags); - return data; + *msg = cfg->msg; } void mask_ht_irq(unsigned int irq) { struct ht_irq_cfg *cfg; - unsigned long flags; - u32 data; + struct ht_irq_msg msg; cfg = get_irq_data(irq); - spin_lock_irqsave(&ht_irq_lock, flags); - pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx); - pci_read_config_dword(cfg->dev, cfg->pos + 4, &data); - data |= 1; - pci_write_config_dword(cfg->dev, cfg->pos + 4, data); - spin_unlock_irqrestore(&ht_irq_lock, flags); + msg = cfg->msg; + msg.address_lo |= 1; + write_ht_irq_msg(irq, &msg); } void unmask_ht_irq(unsigned int irq) { struct ht_irq_cfg *cfg; - unsigned long flags; - u32 data; + struct ht_irq_msg msg; cfg = get_irq_data(irq); - spin_lock_irqsave(&ht_irq_lock, flags); - pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx); - pci_read_config_dword(cfg->dev, cfg->pos + 4, &data); - data &= ~1; - pci_write_config_dword(cfg->dev, cfg->pos + 4, data); - spin_unlock_irqrestore(&ht_irq_lock, flags); + msg = cfg->msg; + msg.address_lo &= ~1; + write_ht_irq_msg(irq, &msg); } /** - * ht_create_irq - create an irq and attach it to a device. + * __ht_create_irq - create an irq and attach it to a device. * @dev: The hypertransport device to find the irq capability on. * @idx: Which of the possible irqs to attach to. - * - * ht_create_irq is needs to be called for all hypertransport devices - * that generate irqs. + * @update: Function to be called when changing the htirq message * * The irq number of the new irq or a negative error value is returned. */ -int ht_create_irq(struct pci_dev *dev, int idx) +int __ht_create_irq(struct pci_dev *dev, int idx, ht_irq_update_t *update) { struct ht_irq_cfg *cfg; unsigned long flags; @@ -150,8 +125,12 @@ int ht_create_irq(struct pci_dev *dev, int idx) return -ENOMEM; cfg->dev = dev; + cfg->update = update; cfg->pos = pos; cfg->idx = 0x10 + (idx * 2); + /* Initialize msg to a value that will never match the first write. */ + cfg->msg.address_lo = 0xffffffff; + cfg->msg.address_hi = 0xffffffff; irq = create_irq(); if (irq < 0) { @@ -169,6 +148,21 @@ int ht_create_irq(struct pci_dev *dev, int idx) } /** + * ht_create_irq - create an irq and attach it to a device. + * @dev: The hypertransport device to find the irq capability on. + * @idx: Which of the possible irqs to attach to. + * + * ht_create_irq needs to be called for all hypertransport devices + * that generate irqs. + * + * The irq number of the new irq or a negative error value is returned. + */ +int ht_create_irq(struct pci_dev *dev, int idx) +{ + return __ht_create_irq(dev, idx, NULL); +} + +/** * ht_destroy_irq - destroy an irq created with ht_create_irq * * This reverses ht_create_irq removing the specified irq from @@ -186,5 +180,6 @@ void ht_destroy_irq(unsigned int irq) kfree(cfg); } +EXPORT_SYMBOL(__ht_create_irq); EXPORT_SYMBOL(ht_create_irq); EXPORT_SYMBOL(ht_destroy_irq); diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index f9fdc54..9fc9a34 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -627,22 +627,24 @@ static int msix_capability_init(struct pci_dev *dev, * pci_msi_supported - check whether MSI may be enabled on device * @dev: pointer to the pci_dev data structure of MSI device function * - * MSI must be globally enabled and supported by the device and its root - * bus. But, the root bus is not easy to find since some architectures - * have virtual busses on top of the PCI hierarchy (for instance the - * hypertransport bus), while the actual bus where MSI must be supported - * is below. So we test the MSI flag on all parent busses and assume - * that no quirk will ever set the NO_MSI flag on a non-root bus. + * Look at global flags, the device itself, and its parent busses + * to return 0 if MSI are supported for the device. **/ static int pci_msi_supported(struct pci_dev * dev) { struct pci_bus *bus; + /* MSI must be globally enabled and supported by the device */ if (!pci_msi_enable || !dev || dev->no_msi) return -EINVAL; - /* check MSI flags of all parent busses */ + /* Any bridge which does NOT route MSI transactions from it's + * secondary bus to it's primary bus must set NO_MSI flag on + * the secondary pci_bus. + * We expect only arch-specific PCI host bus controller driver + * or quirks for specific PCI bridges to be setting NO_MSI. + */ for (bus = dev->bus; bus; bus = bus->parent) if (bus->bus_flags & PCI_BUS_FLAGS_NO_MSI) return -EINVAL; diff --git a/drivers/pci/msi.h b/drivers/pci/msi.h index f0cca17..3898f52 100644 --- a/drivers/pci/msi.h +++ b/drivers/pci/msi.h @@ -6,14 +6,6 @@ #ifndef MSI_H #define MSI_H -/* - * MSI-X Address Register - */ -#define PCI_MSIX_FLAGS_QSIZE 0x7FF -#define PCI_MSIX_FLAGS_ENABLE (1 << 15) -#define PCI_MSIX_FLAGS_BIRMASK (7 << 0) -#define PCI_MSIX_FLAGS_BITMASK (1 << 0) - #define PCI_MSIX_ENTRY_SIZE 16 #define PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET 0 #define PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET 4 diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index bb7456c..a064f36 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -36,6 +36,7 @@ acpi_query_osc ( struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL}; union acpi_object *out_obj; u32 osc_dw0; + acpi_status *ret_status = (acpi_status *)retval; /* Setting up input parameters */ @@ -56,6 +57,7 @@ acpi_query_osc ( if (ACPI_FAILURE (status)) { printk(KERN_DEBUG "Evaluate _OSC Set fails. Status = 0x%04x\n", status); + *ret_status = status; return status; } out_obj = output.pointer; @@ -90,6 +92,7 @@ acpi_query_osc ( query_osc_out: kfree(output.pointer); + *ret_status = status; return status; } @@ -166,6 +169,7 @@ run_osc_out: acpi_status pci_osc_support_set(u32 flags) { u32 temp; + acpi_status retval; if (!(flags & OSC_SUPPORT_MASKS)) { return AE_TYPE; @@ -179,9 +183,13 @@ acpi_status pci_osc_support_set(u32 flags) acpi_get_devices ( PCI_ROOT_HID_STRING, acpi_query_osc, ctrlset_buf, - NULL ); + (void **) &retval ); ctrlset_buf[OSC_QUERY_TYPE] = !OSC_QUERY_ENABLE; ctrlset_buf[OSC_CONTROL_TYPE] = temp; + if (ACPI_FAILURE(retval)) { + /* no osc support at all */ + ctrlset_buf[OSC_SUPPORT_TYPE] = 0; + } return AE_OK; } EXPORT_SYMBOL(pci_osc_support_set); diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index b1c0c70..e5ae3a0 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -265,6 +265,13 @@ static int pci_device_remove(struct device * dev) } /* + * If the device is still on, set the power state as "unknown", + * since it might change by the next time we load the driver. + */ + if (pci_dev->current_state == PCI_D0) + pci_dev->current_state = PCI_UNKNOWN; + + /* * We would love to complain here if pci_dev->is_enabled is set, that * the driver should have called pci_disable_device(), but the * unfortunate fact is there are too many odd BIOS and bridge setups @@ -288,6 +295,12 @@ static int pci_device_suspend(struct device * dev, pm_message_t state) suspend_report_result(drv->suspend, i); } else { pci_save_state(pci_dev); + /* + * mark its power state as "unknown", since we don't know if + * e.g. the BIOS will change its device state when we suspend. + */ + if (pci_dev->current_state == PCI_D0) + pci_dev->current_state = PCI_UNKNOWN; } return i; } @@ -316,8 +329,8 @@ static int pci_default_resume(struct pci_dev *pci_dev) /* restore the PCI config space */ pci_restore_state(pci_dev); /* if the device was enabled before suspend, reenable */ - if (pci_dev->is_enabled) - retval = pci_enable_device(pci_dev); + if (atomic_read(&pci_dev->enable_cnt)) + retval = __pci_enable_device(pci_dev); /* if the device was busmaster before the suspend, make it busmaster again */ if (pci_dev->is_busmaster) pci_set_master(pci_dev); @@ -432,9 +445,12 @@ int __pci_register_driver(struct pci_driver *drv, struct module *owner) /* register with core */ error = driver_register(&drv->driver); + if (error) + return error; - if (!error) - error = pci_create_newid_file(drv); + error = pci_create_newid_file(drv); + if (error) + driver_unregister(&drv->driver); return error; } diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index a1d2e97..7a94076 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -42,7 +42,6 @@ pci_config_attr(subsystem_vendor, "0x%04x\n"); pci_config_attr(subsystem_device, "0x%04x\n"); pci_config_attr(class, "0x%06x\n"); pci_config_attr(irq, "%u\n"); -pci_config_attr(is_enabled, "%u\n"); static ssize_t broken_parity_status_show(struct device *dev, struct device_attribute *attr, @@ -112,26 +111,36 @@ static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, (u8)(pci_dev->class >> 16), (u8)(pci_dev->class >> 8), (u8)(pci_dev->class)); } -static ssize_t -is_enabled_store(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) + +static ssize_t is_enabled_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) { + ssize_t result = -EINVAL; struct pci_dev *pdev = to_pci_dev(dev); - int retval = 0; /* this can crash the machine when done on the "wrong" device */ if (!capable(CAP_SYS_ADMIN)) return count; - if (*buf == '0') - pci_disable_device(pdev); + if (*buf == '0') { + if (atomic_read(&pdev->enable_cnt) != 0) + pci_disable_device(pdev); + else + result = -EIO; + } else if (*buf == '1') + result = pci_enable_device(pdev); + + return result < 0 ? result : count; +} - if (*buf == '1') - retval = pci_enable_device(pdev); +static ssize_t is_enabled_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct pci_dev *pdev; - if (retval) - return retval; - return count; + pdev = to_pci_dev (dev); + return sprintf (buf, "%u\n", atomic_read(&pdev->enable_cnt)); } static ssize_t @@ -642,6 +651,9 @@ err: */ void pci_remove_sysfs_dev_files(struct pci_dev *pdev) { + if (!sysfs_initialized) + return; + if (pdev->cfg_size < 4096) sysfs_remove_bin_file(&pdev->dev.kobj, &pci_config_attr); else diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index a544997..5a14b73 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -490,6 +490,47 @@ static void pci_restore_pcie_state(struct pci_dev *dev) kfree(save_state); } + +static int pci_save_pcix_state(struct pci_dev *dev) +{ + int pos, i = 0; + struct pci_cap_saved_state *save_state; + u16 *cap; + + pos = pci_find_capability(dev, PCI_CAP_ID_PCIX); + if (pos <= 0) + return 0; + + save_state = kzalloc(sizeof(*save_state) + sizeof(u16), GFP_KERNEL); + if (!save_state) { + dev_err(&dev->dev, "Out of memory in pci_save_pcie_state\n"); + return -ENOMEM; + } + cap = (u16 *)&save_state->data[0]; + + pci_read_config_word(dev, pos + PCI_X_CMD, &cap[i++]); + pci_add_saved_cap(dev, save_state); + return 0; +} + +static void pci_restore_pcix_state(struct pci_dev *dev) +{ + int i = 0, pos; + struct pci_cap_saved_state *save_state; + u16 *cap; + + save_state = pci_find_saved_cap(dev, PCI_CAP_ID_PCIX); + pos = pci_find_capability(dev, PCI_CAP_ID_PCIX); + if (!save_state || pos <= 0) + return; + cap = (u16 *)&save_state->data[0]; + + pci_write_config_word(dev, pos + PCI_X_CMD, cap[i++]); + pci_remove_saved_cap(save_state); + kfree(save_state); +} + + /** * pci_save_state - save the PCI configuration space of a device before suspending * @dev: - PCI device that we're dealing with @@ -507,6 +548,8 @@ pci_save_state(struct pci_dev *dev) return i; if ((i = pci_save_pcie_state(dev)) != 0) return i; + if ((i = pci_save_pcix_state(dev)) != 0) + return i; return 0; } @@ -538,6 +581,7 @@ pci_restore_state(struct pci_dev *dev) dev->saved_config_space[i]); } } + pci_restore_pcix_state(dev); pci_restore_msi_state(dev); pci_restore_msix_state(dev); return 0; @@ -568,30 +612,51 @@ pci_enable_device_bars(struct pci_dev *dev, int bars) } /** - * pci_enable_device - Initialize device before it's used by a driver. + * __pci_enable_device - Initialize device before it's used by a driver. * @dev: PCI device to be initialized * * Initialize device before it's used by a driver. Ask low-level code * to enable I/O and memory. Wake up the device if it was suspended. * Beware, this function can fail. + * + * Note this function is a backend and is not supposed to be called by + * normal code, use pci_enable_device() instead. */ int -pci_enable_device(struct pci_dev *dev) +__pci_enable_device(struct pci_dev *dev) { int err; - if (dev->is_enabled) - return 0; - err = pci_enable_device_bars(dev, (1 << PCI_NUM_RESOURCES) - 1); if (err) return err; pci_fixup_device(pci_fixup_enable, dev); - dev->is_enabled = 1; return 0; } /** + * pci_enable_device - Initialize device before it's used by a driver. + * @dev: PCI device to be initialized + * + * Initialize device before it's used by a driver. Ask low-level code + * to enable I/O and memory. Wake up the device if it was suspended. + * Beware, this function can fail. + * + * Note we don't actually enable the device many times if we call + * this function repeatedly (we just increment the count). + */ +int pci_enable_device(struct pci_dev *dev) +{ + int result; + if (atomic_add_return(1, &dev->enable_cnt) > 1) + return 0; /* already enabled */ + result = __pci_enable_device(dev); + if (result < 0) + atomic_dec(&dev->enable_cnt); + return result; +} + +/** * pcibios_disable_device - disable arch specific PCI resources for device dev * @dev: the PCI device to disable * @@ -607,12 +672,18 @@ void __attribute__ ((weak)) pcibios_disable_device (struct pci_dev *dev) {} * * Signal to the system that the PCI device is not in use by the system * anymore. This only involves disabling PCI bus-mastering, if active. + * + * Note we don't actually disable the device until all callers of + * pci_device_enable() have called pci_device_disable(). */ void pci_disable_device(struct pci_dev *dev) { u16 pci_command; + if (atomic_sub_return(1, &dev->enable_cnt) != 0) + return; + if (dev->msi_enabled) disable_msi_mode(dev, pci_find_capability(dev, PCI_CAP_ID_MSI), PCI_CAP_ID_MSI); @@ -628,7 +699,6 @@ pci_disable_device(struct pci_dev *dev) dev->is_busmaster = 0; pcibios_disable_device(dev); - dev->is_enabled = 0; } /** @@ -831,22 +901,38 @@ pci_set_master(struct pci_dev *dev) pcibios_set_master(dev); } -#ifndef HAVE_ARCH_PCI_MWI +#ifdef PCI_DISABLE_MWI +int pci_set_mwi(struct pci_dev *dev) +{ + return 0; +} + +void pci_clear_mwi(struct pci_dev *dev) +{ +} + +#else + +#ifndef PCI_CACHE_LINE_BYTES +#define PCI_CACHE_LINE_BYTES L1_CACHE_BYTES +#endif + /* This can be overridden by arch code. */ -u8 pci_cache_line_size = L1_CACHE_BYTES >> 2; +/* Don't forget this is measured in 32-bit words, not bytes */ +u8 pci_cache_line_size = PCI_CACHE_LINE_BYTES / 4; /** - * pci_generic_prep_mwi - helper function for pci_set_mwi - * @dev: the PCI device for which MWI is enabled + * pci_set_cacheline_size - ensure the CACHE_LINE_SIZE register is programmed + * @dev: the PCI device for which MWI is to be enabled * - * Helper function for generic implementation of pcibios_prep_mwi - * function. Originally copied from drivers/net/acenic.c. + * Helper function for pci_set_mwi. + * Originally copied from drivers/net/acenic.c. * Copyright 1998-2001 by Jes Sorensen, <jes@trained-monkey.org>. * * RETURNS: An appropriate -ERRNO error value on error, or zero for success. */ static int -pci_generic_prep_mwi(struct pci_dev *dev) +pci_set_cacheline_size(struct pci_dev *dev) { u8 cacheline_size; @@ -872,7 +958,6 @@ pci_generic_prep_mwi(struct pci_dev *dev) return -EINVAL; } -#endif /* !HAVE_ARCH_PCI_MWI */ /** * pci_set_mwi - enables memory-write-invalidate PCI transaction @@ -890,12 +975,7 @@ pci_set_mwi(struct pci_dev *dev) int rc; u16 cmd; -#ifdef HAVE_ARCH_PCI_MWI - rc = pcibios_prep_mwi(dev); -#else - rc = pci_generic_prep_mwi(dev); -#endif - + rc = pci_set_cacheline_size(dev); if (rc) return rc; @@ -926,6 +1006,7 @@ pci_clear_mwi(struct pci_dev *dev) pci_write_config_word(dev, PCI_COMMAND, cmd); } } +#endif /* ! PCI_DISABLE_MWI */ /** * pci_intx - enables/disables PCI INTx for device dev diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 6bf327d..398852f 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -1,5 +1,6 @@ /* Functions internal to the PCI core code */ +extern int __must_check __pci_enable_device(struct pci_dev *); extern int pci_uevent(struct device *dev, char **envp, int num_envp, char *buffer, int buffer_size); extern int pci_create_sysfs_dev_files(struct pci_dev *pdev); diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h index 67fcd17..3656e03 100644 --- a/drivers/pci/pcie/portdrv.h +++ b/drivers/pci/pcie/portdrv.h @@ -9,6 +9,8 @@ #ifndef _PORTDRV_H_ #define _PORTDRV_H_ +#include <linux/compiler.h> + #if !defined(PCI_CAP_ID_PME) #define PCI_CAP_ID_PME 1 #endif @@ -39,7 +41,7 @@ extern int pcie_port_device_suspend(struct pci_dev *dev, pm_message_t state); extern int pcie_port_device_resume(struct pci_dev *dev); #endif extern void pcie_port_device_remove(struct pci_dev *dev); -extern int pcie_port_bus_register(void); +extern int __must_check pcie_port_bus_register(void); extern void pcie_port_bus_unregister(void); #endif /* _PORTDRV_H_ */ diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c index bd6615b..b20a9b8 100644 --- a/drivers/pci/pcie/portdrv_core.c +++ b/drivers/pci/pcie/portdrv_core.c @@ -6,7 +6,6 @@ * Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com) */ -#include <linux/compiler.h> #include <linux/module.h> #include <linux/pci.h> #include <linux/kernel.h> @@ -401,7 +400,7 @@ void pcie_port_device_remove(struct pci_dev *dev) pci_disable_msi(dev); } -int __must_check pcie_port_bus_register(void) +int pcie_port_bus_register(void) { return bus_register(&pcie_port_bus_type); } diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index 037690e..b4da795 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -37,7 +37,6 @@ static int pcie_portdrv_save_config(struct pci_dev *dev) return pci_save_state(dev); } -#ifdef CONFIG_PM static int pcie_portdrv_restore_config(struct pci_dev *dev) { int retval; @@ -50,6 +49,7 @@ static int pcie_portdrv_restore_config(struct pci_dev *dev) return 0; } +#ifdef CONFIG_PM static int pcie_portdrv_suspend(struct pci_dev *dev, pm_message_t state) { int ret = pcie_port_device_suspend(dev, state); diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index a3b0a5e..0eeac60 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -679,6 +679,33 @@ static int pci_setup_device(struct pci_dev * dev) pci_read_bases(dev, 6, PCI_ROM_ADDRESS); pci_read_config_word(dev, PCI_SUBSYSTEM_VENDOR_ID, &dev->subsystem_vendor); pci_read_config_word(dev, PCI_SUBSYSTEM_ID, &dev->subsystem_device); + + /* + * Do the ugly legacy mode stuff here rather than broken chip + * quirk code. Legacy mode ATA controllers have fixed + * addresses. These are not always echoed in BAR0-3, and + * BAR0-3 in a few cases contain junk! + */ + if (class == PCI_CLASS_STORAGE_IDE) { + u8 progif; + pci_read_config_byte(dev, PCI_CLASS_PROG, &progif); + if ((progif & 1) == 0) { + dev->resource[0].start = 0x1F0; + dev->resource[0].end = 0x1F7; + dev->resource[0].flags = IORESOURCE_IO; + dev->resource[1].start = 0x3F6; + dev->resource[1].end = 0x3F6; + dev->resource[1].flags = IORESOURCE_IO; + } + if ((progif & 4) == 0) { + dev->resource[2].start = 0x170; + dev->resource[2].end = 0x177; + dev->resource[2].flags = IORESOURCE_IO; + dev->resource[3].start = 0x376; + dev->resource[3].end = 0x376; + dev->resource[3].flags = IORESOURCE_IO; + } + } break; case PCI_HEADER_TYPE_BRIDGE: /* bridge header */ @@ -1067,3 +1094,95 @@ EXPORT_SYMBOL(pci_scan_bridge); EXPORT_SYMBOL(pci_scan_single_device); EXPORT_SYMBOL_GPL(pci_scan_child_bus); #endif + +static int __init pci_sort_bf_cmp(const struct pci_dev *a, const struct pci_dev *b) +{ + if (pci_domain_nr(a->bus) < pci_domain_nr(b->bus)) return -1; + else if (pci_domain_nr(a->bus) > pci_domain_nr(b->bus)) return 1; + + if (a->bus->number < b->bus->number) return -1; + else if (a->bus->number > b->bus->number) return 1; + + if (a->devfn < b->devfn) return -1; + else if (a->devfn > b->devfn) return 1; + + return 0; +} + +/* + * Yes, this forcably breaks the klist abstraction temporarily. It + * just wants to sort the klist, not change reference counts and + * take/drop locks rapidly in the process. It does all this while + * holding the lock for the list, so objects can't otherwise be + * added/removed while we're swizzling. + */ +static void __init pci_insertion_sort_klist(struct pci_dev *a, struct list_head *list) +{ + struct list_head *pos; + struct klist_node *n; + struct device *dev; + struct pci_dev *b; + + list_for_each(pos, list) { + n = container_of(pos, struct klist_node, n_node); + dev = container_of(n, struct device, knode_bus); + b = to_pci_dev(dev); + if (pci_sort_bf_cmp(a, b) <= 0) { + list_move_tail(&a->dev.knode_bus.n_node, &b->dev.knode_bus.n_node); + return; + } + } + list_move_tail(&a->dev.knode_bus.n_node, list); +} + +static void __init pci_sort_breadthfirst_klist(void) +{ + LIST_HEAD(sorted_devices); + struct list_head *pos, *tmp; + struct klist_node *n; + struct device *dev; + struct pci_dev *pdev; + + spin_lock(&pci_bus_type.klist_devices.k_lock); + list_for_each_safe(pos, tmp, &pci_bus_type.klist_devices.k_list) { + n = container_of(pos, struct klist_node, n_node); + dev = container_of(n, struct device, knode_bus); + pdev = to_pci_dev(dev); + pci_insertion_sort_klist(pdev, &sorted_devices); + } + list_splice(&sorted_devices, &pci_bus_type.klist_devices.k_list); + spin_unlock(&pci_bus_type.klist_devices.k_lock); +} + +static void __init pci_insertion_sort_devices(struct pci_dev *a, struct list_head *list) +{ + struct pci_dev *b; + + list_for_each_entry(b, list, global_list) { + if (pci_sort_bf_cmp(a, b) <= 0) { + list_move_tail(&a->global_list, &b->global_list); + return; + } + } + list_move_tail(&a->global_list, list); +} + +static void __init pci_sort_breadthfirst_devices(void) +{ + LIST_HEAD(sorted_devices); + struct pci_dev *dev, *tmp; + + down_write(&pci_bus_sem); + list_for_each_entry_safe(dev, tmp, &pci_devices, global_list) { + pci_insertion_sort_devices(dev, &sorted_devices); + } + list_splice(&sorted_devices, &pci_devices); + up_write(&pci_bus_sem); +} + +void __init pci_sort_breadthfirst(void) +{ + pci_sort_breadthfirst_devices(); + pci_sort_breadthfirst_klist(); +} + diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 23b599d..9ca9b9b 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -453,6 +453,12 @@ static void __devinit quirk_ich6_lpc_acpi(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, quirk_ich6_lpc_acpi ); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, quirk_ich6_lpc_acpi ); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, quirk_ich6_lpc_acpi ); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, quirk_ich6_lpc_acpi ); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31, quirk_ich6_lpc_acpi ); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_0, quirk_ich6_lpc_acpi ); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_2, quirk_ich6_lpc_acpi ); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_3, quirk_ich6_lpc_acpi ); /* * VIA ACPI: One IO region pointed to by longword at @@ -648,11 +654,43 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_vi * Some of the on-chip devices are actually '586 devices' so they are * listed here. */ + +static int via_irq_fixup_needed = -1; + +/* + * As some VIA hardware is available in PCI-card form, we need to restrict + * this quirk to VIA PCI hardware built onto VIA-based motherboards only. + * We try to locate a VIA southbridge before deciding whether the quirk + * should be applied. + */ +static const struct pci_device_id via_irq_fixup_tbl[] = { + { + .vendor = PCI_VENDOR_ID_VIA, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .class = PCI_CLASS_BRIDGE_ISA << 8, + .class_mask = 0xffff00, + }, + { 0, }, +}; + static void quirk_via_irq(struct pci_dev *dev) { u8 irq, new_irq; - new_irq = dev->irq & 0xf; + if (via_irq_fixup_needed == -1) + via_irq_fixup_needed = pci_dev_present(via_irq_fixup_tbl); + + if (!via_irq_fixup_needed) + return; + + new_irq = dev->irq; + + /* Don't quirk interrupts outside the legacy IRQ range */ + if (!new_irq || new_irq > 15) + return; + pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq); if (new_irq != irq) { printk(KERN_INFO "PCI: VIA IRQ fixup for %s, from %d to %d\n", @@ -661,14 +699,7 @@ static void quirk_via_irq(struct pci_dev *dev) pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq); } } -DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, quirk_via_irq); -DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, quirk_via_irq); -DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, quirk_via_irq); -DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_irq); -DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235_USB_2, quirk_via_irq); -DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_irq); -DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_irq); -DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5, quirk_via_irq); +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq); /* * VIA VT82C598 has its device ID settable and many BIOSes @@ -683,33 +714,6 @@ static void __devinit quirk_vt82c598_id(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_vt82c598_id ); -#ifdef CONFIG_ACPI_SLEEP - -/* - * Some VIA systems boot with the abnormal status flag set. This can cause - * the BIOS to re-POST the system on resume rather than passing control - * back to the OS. Clear the flag on boot - */ -static void __devinit quirk_via_abnormal_poweroff(struct pci_dev *dev) -{ - u32 reg; - - acpi_hw_register_read(ACPI_MTX_DO_NOT_LOCK, ACPI_REGISTER_PM1_STATUS, - ®); - - if (reg & 0x800) { - printk("Clearing abnormal poweroff flag\n"); - acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK, - ACPI_REGISTER_PM1_STATUS, - (u16)0x800); - } -} - -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_via_abnormal_poweroff); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_abnormal_poweroff); - -#endif - /* * CardBus controllers have a legacy base address that enables them * to respond as i82365 pcmcia controllers. We don't want them to @@ -793,56 +797,6 @@ static void __init quirk_mediagx_master(struct pci_dev *dev) DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master ); /* - * As per PCI spec, ignore base address registers 0-3 of the IDE controllers - * running in Compatible mode (bits 0 and 2 in the ProgIf for primary and - * secondary channels respectively). If the device reports Compatible mode - * but does use BAR0-3 for address decoding, we assume that firmware has - * programmed these BARs with standard values (0x1f0,0x3f4 and 0x170,0x374). - * Exceptions (if they exist) must be handled in chip/architecture specific - * fixups. - * - * Note: for non x86 people. You may need an arch specific quirk to handle - * moving IDE devices to native mode as well. Some plug in card devices power - * up in compatible mode and assume the BIOS will adjust them. - * - * Q: should we load the 0x1f0,0x3f4 into the registers or zap them as - * we do now ? We don't want is pci_enable_device to come along - * and assign new resources. Both approaches work for that. - */ -static void __devinit quirk_ide_bases(struct pci_dev *dev) -{ - struct resource *res; - int first_bar = 2, last_bar = 0; - - if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE) - return; - - res = &dev->resource[0]; - - /* primary channel: ProgIf bit 0, BAR0, BAR1 */ - if (!(dev->class & 1) && (res[0].flags || res[1].flags)) { - res[0].start = res[0].end = res[0].flags = 0; - res[1].start = res[1].end = res[1].flags = 0; - first_bar = 0; - last_bar = 1; - } - - /* secondary channel: ProgIf bit 2, BAR2, BAR3 */ - if (!(dev->class & 4) && (res[2].flags || res[3].flags)) { - res[2].start = res[2].end = res[2].flags = 0; - res[3].start = res[3].end = res[3].flags = 0; - last_bar = 3; - } - - if (!last_bar) - return; - - printk(KERN_INFO "PCI: Ignoring BAR%d-%d of IDE controller %s\n", - first_bar, last_bar, pci_name(dev)); -} -DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_ide_bases); - -/* * Ensure C0 rev restreaming is off. This is normally done by * the BIOS but in the odd case it is not the results are corruption * hence the presence of a Linux check @@ -876,11 +830,10 @@ static void __devinit quirk_svwks_csb5ide(struct pci_dev *pdev) prog &= ~5; pdev->class &= ~5; pci_write_config_byte(pdev, PCI_CLASS_PROG, prog); - /* need to re-assign BARs for compat mode */ - quirk_ide_bases(pdev); + /* PCI layer will sort out resources */ } } -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, quirk_svwks_csb5ide ); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, quirk_svwks_csb5ide ); /* * Intel 82801CAM ICH3-M datasheet says IDE modes must be the same @@ -896,11 +849,9 @@ static void __init quirk_ide_samemode(struct pci_dev *pdev) prog &= ~5; pdev->class &= ~5; pci_write_config_byte(pdev, PCI_CLASS_PROG, prog); - /* need to re-assign BARs for compat mode */ - quirk_ide_bases(pdev); } } -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, quirk_ide_samemode); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, quirk_ide_samemode); /* This was originally an Alpha specific thing, but it really fits here. * The i82375 PCI/EISA bridge appears as non-classified. Fix that. @@ -1456,33 +1407,6 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2609, quirk_intel_pcie_pm); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260a, quirk_intel_pcie_pm); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm); -/* - * Fixup the cardbus bridges on the IBM Dock II docking station - */ -static void __devinit quirk_ibm_dock2_cardbus(struct pci_dev *dev) -{ - u32 val; - - /* - * tie the 2 interrupt pins to INTA, and configure the - * multifunction routing register to handle this. - */ - if ((dev->subsystem_vendor == PCI_VENDOR_ID_IBM) && - (dev->subsystem_device == 0x0148)) { - printk(KERN_INFO "PCI: Found IBM Dock II Cardbus Bridge " - "applying quirk\n"); - pci_read_config_dword(dev, 0x8c, &val); - val = ((val & 0xffffff00) | 0x1002); - pci_write_config_dword(dev, 0x8c, val); - pci_read_config_dword(dev, 0x80, &val); - val = ((val & 0x00ffff00) | 0x2864c077); - pci_write_config_dword(dev, 0x80, val); - } -} - -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1420, - quirk_ibm_dock2_cardbus); - static void __devinit quirk_netmos(struct pci_dev *dev) { unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4; @@ -1588,7 +1512,6 @@ static void __devinit fixup_rev1_53c810(struct pci_dev* dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810); - static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end) { while (f < end) { @@ -1764,7 +1687,7 @@ static void __devinit quirk_nvidia_ck804_msi_ht_cap(struct pci_dev *dev) /* check HT MSI cap on this chipset and the root one. * a single one having MSI is enough to be sure that MSI are supported. */ - pdev = pci_find_slot(dev->bus->number, 0); + pdev = pci_get_slot(dev->bus, 0); if (dev->subordinate && !msi_ht_cap_enabled(dev) && !msi_ht_cap_enabled(pdev)) { printk(KERN_WARNING "PCI: MSI quirk detected. " @@ -1772,6 +1695,7 @@ static void __devinit quirk_nvidia_ck804_msi_ht_cap(struct pci_dev *dev) pci_name(dev)); dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; } + pci_dev_put(pdev); } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, quirk_nvidia_ck804_msi_ht_cap); diff --git a/drivers/pci/rom.c b/drivers/pci/rom.c index f5ee7ce..d087e08 100644 --- a/drivers/pci/rom.c +++ b/drivers/pci/rom.c @@ -71,13 +71,18 @@ void __iomem *pci_map_rom(struct pci_dev *pdev, size_t *size) void __iomem *image; int last_image; - /* IORESOURCE_ROM_SHADOW only set on x86 */ + /* + * IORESOURCE_ROM_SHADOW set on x86, x86_64 and IA64 supports legacy + * memory map if the VGA enable bit of the Bridge Control register is + * set for embedded VGA. + */ if (res->flags & IORESOURCE_ROM_SHADOW) { /* primary video rom always starts here */ start = (loff_t)0xC0000; *size = 0x20000; /* cover C000:0 through E000:0 */ } else { - if (res->flags & IORESOURCE_ROM_COPY) { + if (res->flags & + (IORESOURCE_ROM_COPY | IORESOURCE_ROM_BIOS_COPY)) { *size = pci_resource_len(pdev, PCI_ROM_RESOURCE); return (void __iomem *)(unsigned long) pci_resource_start(pdev, PCI_ROM_RESOURCE); @@ -161,7 +166,8 @@ void __iomem *pci_map_rom_copy(struct pci_dev *pdev, size_t *size) if (!rom) return NULL; - if (res->flags & (IORESOURCE_ROM_COPY | IORESOURCE_ROM_SHADOW)) + if (res->flags & (IORESOURCE_ROM_COPY | IORESOURCE_ROM_SHADOW | + IORESOURCE_ROM_BIOS_COPY)) return rom; res->start = (unsigned long)kmalloc(*size, GFP_KERNEL); @@ -187,7 +193,7 @@ void pci_unmap_rom(struct pci_dev *pdev, void __iomem *rom) { struct resource *res = &pdev->resource[PCI_ROM_RESOURCE]; - if (res->flags & IORESOURCE_ROM_COPY) + if (res->flags & (IORESOURCE_ROM_COPY | IORESOURCE_ROM_BIOS_COPY)) return; iounmap(rom); @@ -211,6 +217,7 @@ void pci_remove_rom(struct pci_dev *pdev) sysfs_remove_bin_file(&pdev->dev.kobj, pdev->rom_attr); if (!(res->flags & (IORESOURCE_ROM_ENABLE | IORESOURCE_ROM_SHADOW | + IORESOURCE_ROM_BIOS_COPY | IORESOURCE_ROM_COPY))) pci_disable_rom(pdev); } diff --git a/drivers/pci/search.c b/drivers/pci/search.c index d529462..2f13eba 100644 --- a/drivers/pci/search.c +++ b/drivers/pci/search.c @@ -140,6 +140,31 @@ struct pci_dev * pci_get_slot(struct pci_bus *bus, unsigned int devfn) } /** + * pci_get_bus_and_slot - locate PCI device from a given PCI slot + * @bus: number of PCI bus on which desired PCI device resides + * @devfn: encodes number of PCI slot in which the desired PCI + * device resides and the logical device number within that slot + * in case of multi-function devices. + * + * Given a PCI bus and slot/function number, the desired PCI device + * is located in system global list of PCI devices. If the device + * is found, a pointer to its data structure is returned. If no + * device is found, %NULL is returned. The returned device has its + * reference count bumped by one. + */ + +struct pci_dev * pci_get_bus_and_slot(unsigned int bus, unsigned int devfn) +{ + struct pci_dev *dev = NULL; + + while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { + if (dev->bus->number == bus && dev->devfn == devfn) + return dev; + } + return NULL; +} + +/** * pci_find_subsys - begin or continue searching for a PCI device by vendor/subvendor/device/subdevice id * @vendor: PCI vendor id to match, or %PCI_ANY_ID to match all vendor ids * @device: PCI device id to match, or %PCI_ANY_ID to match all device ids @@ -274,6 +299,45 @@ pci_get_device(unsigned int vendor, unsigned int device, struct pci_dev *from) return pci_get_subsys(vendor, device, PCI_ANY_ID, PCI_ANY_ID, from); } +/** + * pci_get_device_reverse - begin or continue searching for a PCI device by vendor/device id + * @vendor: PCI vendor id to match, or %PCI_ANY_ID to match all vendor ids + * @device: PCI device id to match, or %PCI_ANY_ID to match all device ids + * @from: Previous PCI device found in search, or %NULL for new search. + * + * Iterates through the list of known PCI devices in the reverse order of + * pci_get_device. + * If a PCI device is found with a matching @vendor and @device, the reference + * count to the device is incremented and a pointer to its device structure + * is returned Otherwise, %NULL is returned. A new search is initiated by + * passing %NULL as the @from argument. Otherwise if @from is not %NULL, + * searches continue from next device on the global list. The reference + * count for @from is always decremented if it is not %NULL. + */ +struct pci_dev * +pci_get_device_reverse(unsigned int vendor, unsigned int device, struct pci_dev *from) +{ + struct list_head *n; + struct pci_dev *dev; + + WARN_ON(in_interrupt()); + down_read(&pci_bus_sem); + n = from ? from->global_list.prev : pci_devices.prev; + + while (n && (n != &pci_devices)) { + dev = pci_dev_g(n); + if ((vendor == PCI_ANY_ID || dev->vendor == vendor) && + (device == PCI_ANY_ID || dev->device == device)) + goto exit; + n = n->prev; + } + dev = NULL; +exit: + dev = pci_dev_get(dev); + up_read(&pci_bus_sem); + pci_dev_put(from); + return dev; +} /** * pci_find_device_reverse - begin or continue searching for a PCI device by vendor/device id @@ -382,12 +446,16 @@ exit: } EXPORT_SYMBOL(pci_dev_present); -EXPORT_SYMBOL(pci_find_bus); -EXPORT_SYMBOL(pci_find_next_bus); EXPORT_SYMBOL(pci_find_device); EXPORT_SYMBOL(pci_find_device_reverse); EXPORT_SYMBOL(pci_find_slot); +/* For boot time work */ +EXPORT_SYMBOL(pci_find_bus); +EXPORT_SYMBOL(pci_find_next_bus); +/* For everyone */ EXPORT_SYMBOL(pci_get_device); +EXPORT_SYMBOL(pci_get_device_reverse); EXPORT_SYMBOL(pci_get_subsys); EXPORT_SYMBOL(pci_get_slot); +EXPORT_SYMBOL(pci_get_bus_and_slot); EXPORT_SYMBOL(pci_get_class); |