diff options
Diffstat (limited to 'drivers/regulator/max8998.c')
| -rw-r--r-- | drivers/regulator/max8998.c | 94 |
1 files changed, 74 insertions, 20 deletions
diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c index 7568df6..0ec49ca 100644 --- a/drivers/regulator/max8998.c +++ b/drivers/regulator/max8998.c @@ -424,6 +424,9 @@ static int max8998_set_voltage_buck(struct regulator_dev *rdev, } } + if (pdata->buck_voltage_lock) + return -EINVAL; + /* no predefine regulator found */ max8998->buck1_idx = (buck1_last_val % 2) + 2; dev_dbg(max8998->dev, "max8998->buck1_idx:%d\n", @@ -451,18 +454,26 @@ buck1_exit: "BUCK2, i:%d buck2_vol1:%d, buck2_vol2:%d\n" , i, max8998->buck2_vol[0], max8998->buck2_vol[1]); if (gpio_is_valid(pdata->buck2_set3)) { - if (max8998->buck2_vol[0] == i) { - max8998->buck1_idx = 0; - buck2_gpio_set(pdata->buck2_set3, 0); - } else { - max8998->buck1_idx = 1; - ret = max8998_get_voltage_register(rdev, ®, - &shift, - &mask); - ret = max8998_write_reg(i2c, reg, i); - max8998->buck2_vol[1] = i; - buck2_gpio_set(pdata->buck2_set3, 1); + + /* check if requested voltage */ + /* value is already defined */ + for (j = 0; j < ARRAY_SIZE(max8998->buck2_vol); j++) { + if (max8998->buck2_vol[j] == i) { + max8998->buck2_idx = j; + buck2_gpio_set(pdata->buck2_set3, j); + goto buck2_exit; + } } + + if (pdata->buck_voltage_lock) + return -EINVAL; + + max8998_get_voltage_register(rdev, + ®, &shift, &mask); + ret = max8998_write_reg(i2c, reg, i); + max8998->buck2_vol[max8998->buck2_idx] = i; + buck2_gpio_set(pdata->buck2_set3, max8998->buck2_idx); +buck2_exit: dev_dbg(max8998->dev, "%s: SET3:%d\n", i2c->name, gpio_get_value(pdata->buck2_set3)); } else { @@ -707,6 +718,9 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev) platform_set_drvdata(pdev, max8998); i2c = max8998->iodev->i2c; + max8998->buck1_idx = pdata->buck1_default_idx; + max8998->buck2_idx = pdata->buck2_default_idx; + /* NOTE: */ /* For unused GPIO NOT marked as -1 (thereof equal to 0) WARN_ON */ /* will be displayed */ @@ -739,23 +753,46 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev) i = 0; while (buck12_voltage_map_desc.min + buck12_voltage_map_desc.step*i - != (pdata->buck1_max_voltage1 / 1000)) + < (pdata->buck1_voltage1 / 1000)) i++; - printk(KERN_ERR "i:%d, buck1_idx:%d\n", i, max8998->buck1_idx); max8998->buck1_vol[0] = i; ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE1, i); + if (ret) + return ret; /* Set predefined value for BUCK1 register 2 */ i = 0; while (buck12_voltage_map_desc.min + buck12_voltage_map_desc.step*i - != (pdata->buck1_max_voltage2 / 1000)) + < (pdata->buck1_voltage2 / 1000)) i++; max8998->buck1_vol[1] = i; - printk(KERN_ERR "i:%d, buck1_idx:%d\n", i, max8998->buck1_idx); - ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE2, i) - + ret; + ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE2, i); + if (ret) + return ret; + + /* Set predefined value for BUCK1 register 3 */ + i = 0; + while (buck12_voltage_map_desc.min + + buck12_voltage_map_desc.step*i + < (pdata->buck1_voltage3 / 1000)) + i++; + + max8998->buck1_vol[2] = i; + ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE3, i); + if (ret) + return ret; + + /* Set predefined value for BUCK1 register 4 */ + i = 0; + while (buck12_voltage_map_desc.min + + buck12_voltage_map_desc.step*i + < (pdata->buck1_voltage4 / 1000)) + i++; + + max8998->buck1_vol[3] = i; + ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE4, i); if (ret) return ret; @@ -772,18 +809,28 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev) gpio_direction_output(pdata->buck2_set3, max8998->buck2_idx & 0x1); - /* BUCK2 - set preset default voltage value to buck2_vol[0] */ + /* BUCK2 register 1 */ i = 0; while (buck12_voltage_map_desc.min + buck12_voltage_map_desc.step*i - != (pdata->buck2_max_voltage / 1000)) + < (pdata->buck2_voltage1 / 1000)) i++; - printk(KERN_ERR "i:%d, buck2_idx:%d\n", i, max8998->buck2_idx); max8998->buck2_vol[0] = i; ret = max8998_write_reg(i2c, MAX8998_REG_BUCK2_VOLTAGE1, i); if (ret) return ret; + /* BUCK2 register 2 */ + i = 0; + while (buck12_voltage_map_desc.min + + buck12_voltage_map_desc.step*i + < (pdata->buck2_voltage2 / 1000)) + i++; + printk(KERN_ERR "i2:%d, buck2_idx:%d\n", i, max8998->buck2_idx); + max8998->buck2_vol[1] = i; + ret = max8998_write_reg(i2c, MAX8998_REG_BUCK2_VOLTAGE2, i); + if (ret) + return ret; } for (i = 0; i < pdata->num_regulators; i++) { @@ -835,6 +882,12 @@ static int __devexit max8998_pmic_remove(struct platform_device *pdev) return 0; } +static const struct platform_device_id max8998_pmic_id[] = { + { "max8998-pmic", TYPE_MAX8998 }, + { "lp3974-pmic", TYPE_LP3974 }, + { } +}; + static struct platform_driver max8998_pmic_driver = { .driver = { .name = "max8998-pmic", @@ -842,6 +895,7 @@ static struct platform_driver max8998_pmic_driver = { }, .probe = max8998_pmic_probe, .remove = __devexit_p(max8998_pmic_remove), + .id_table = max8998_pmic_id, }; static int __init max8998_pmic_init(void) |