aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/core
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/core')
-rw-r--r--drivers/usb/core/devio.c27
-rw-r--r--drivers/usb/core/driver.c7
-rw-r--r--drivers/usb/core/hcd-pci.c5
-rw-r--r--drivers/usb/core/hcd.c13
-rw-r--r--drivers/usb/core/hub.c36
-rw-r--r--drivers/usb/core/quirks.c54
6 files changed, 117 insertions, 25 deletions
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 37518df..0ca54e2 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -407,7 +407,7 @@ static void async_completed(struct urb *urb)
sinfo.si_errno = as->status;
sinfo.si_code = SI_ASYNCIO;
sinfo.si_addr = as->userurb;
- pid = as->pid;
+ pid = get_pid(as->pid);
uid = as->uid;
euid = as->euid;
secid = as->secid;
@@ -422,9 +422,11 @@ static void async_completed(struct urb *urb)
cancel_bulk_urbs(ps, as->bulk_addr);
spin_unlock(&ps->lock);
- if (signr)
+ if (signr) {
kill_pid_info_as_uid(sinfo.si_signo, &sinfo, pid, uid,
euid, secid);
+ put_pid(pid);
+ }
wake_up(&ps->wait);
}
@@ -607,9 +609,10 @@ static int findintfep(struct usb_device *dev, unsigned int ep)
}
static int check_ctrlrecip(struct dev_state *ps, unsigned int requesttype,
- unsigned int index)
+ unsigned int request, unsigned int index)
{
int ret = 0;
+ struct usb_host_interface *alt_setting;
if (ps->dev->state != USB_STATE_UNAUTHENTICATED
&& ps->dev->state != USB_STATE_ADDRESS
@@ -618,6 +621,19 @@ static int check_ctrlrecip(struct dev_state *ps, unsigned int requesttype,
if (USB_TYPE_VENDOR == (USB_TYPE_MASK & requesttype))
return 0;
+ /*
+ * check for the special corner case 'get_device_id' in the printer
+ * class specification, where wIndex is (interface << 8 | altsetting)
+ * instead of just interface
+ */
+ if (requesttype == 0xa1 && request == 0) {
+ alt_setting = usb_find_alt_setting(ps->dev->actconfig,
+ index >> 8, index & 0xff);
+ if (alt_setting
+ && alt_setting->desc.bInterfaceClass == USB_CLASS_PRINTER)
+ index >>= 8;
+ }
+
index &= 0xff;
switch (requesttype & USB_RECIP_MASK) {
case USB_RECIP_ENDPOINT:
@@ -770,7 +786,8 @@ static int proc_control(struct dev_state *ps, void __user *arg)
if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
return -EFAULT;
- ret = check_ctrlrecip(ps, ctrl.bRequestType, ctrl.wIndex);
+ ret = check_ctrlrecip(ps, ctrl.bRequestType, ctrl.bRequest,
+ ctrl.wIndex);
if (ret)
return ret;
wLength = ctrl.wLength; /* To suppress 64k PAGE_SIZE warning */
@@ -1100,7 +1117,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
kfree(dr);
return -EINVAL;
}
- ret = check_ctrlrecip(ps, dr->bRequestType,
+ ret = check_ctrlrecip(ps, dr->bRequestType, dr->bRequest,
le16_to_cpup(&dr->wIndex));
if (ret) {
kfree(dr);
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 34e3da5..75b4bc0 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1583,7 +1583,7 @@ int usb_autopm_get_interface_async(struct usb_interface *intf)
dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n",
__func__, atomic_read(&intf->dev.power.usage_count),
status);
- if (status > 0)
+ if (status > 0 || status == -EINPROGRESS)
status = 0;
return status;
}
@@ -1668,6 +1668,11 @@ int usb_runtime_suspend(struct device *dev)
return -EAGAIN;
status = usb_suspend_both(udev, PMSG_AUTO_SUSPEND);
+
+ /* Allow a retry if autosuspend failed temporarily */
+ if (status == -EAGAIN || status == -EBUSY)
+ usb_mark_last_busy(udev);
+
/* The PM core reacts badly unless the return code is 0,
* -EAGAIN, or -EBUSY, so always return -EBUSY on an error.
*/
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index ce22f4a..6c1642b 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -187,7 +187,10 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
return -ENODEV;
dev->current_state = PCI_D0;
- if (!dev->irq) {
+ /* The xHCI driver supports MSI and MSI-X,
+ * so don't fail if the BIOS doesn't provide a legacy IRQ.
+ */
+ if (!dev->irq && (driver->flags & HCD_MASK) != HCD_USB3) {
dev_err(&dev->dev,
"Found HC with no IRQ. Check BIOS/PCI %s setup!\n",
pci_name(dev));
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index ace9f84..45e0908 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1387,11 +1387,10 @@ int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
ret = -EAGAIN;
else
urb->transfer_flags |= URB_DMA_MAP_SG;
- if (n != urb->num_sgs) {
- urb->num_sgs = n;
+ urb->num_mapped_sgs = n;
+ if (n != urb->num_sgs)
urb->transfer_flags |=
URB_DMA_SG_COMBINED;
- }
} else if (urb->sg) {
struct scatterlist *sg = urb->sg;
urb->transfer_dma = dma_map_page(
@@ -1764,6 +1763,8 @@ int usb_hcd_alloc_bandwidth(struct usb_device *udev,
struct usb_interface *iface = usb_ifnum_to_if(udev,
cur_alt->desc.bInterfaceNumber);
+ if (!iface)
+ return -EINVAL;
if (iface->resetting_device) {
/*
* The USB core just reset the device, so the xHCI host
@@ -2434,8 +2435,10 @@ int usb_add_hcd(struct usb_hcd *hcd,
&& device_can_wakeup(&hcd->self.root_hub->dev))
dev_dbg(hcd->self.controller, "supports USB remote wakeup\n");
- /* enable irqs just before we start the controller */
- if (usb_hcd_is_primary_hcd(hcd)) {
+ /* enable irqs just before we start the controller,
+ * if the BIOS provides legacy PCI irqs.
+ */
+ if (usb_hcd_is_primary_hcd(hcd) && irqnum) {
retval = usb_hcd_request_irqs(hcd, irqnum, irqflags);
if (retval)
goto err_request_irq;
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index a428aa0..3776ddf 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -705,10 +705,26 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
if (type == HUB_INIT3)
goto init3;
- /* After a resume, port power should still be on.
+ /* The superspeed hub except for root hub has to use Hub Depth
+ * value as an offset into the route string to locate the bits
+ * it uses to determine the downstream port number. So hub driver
+ * should send a set hub depth request to superspeed hub after
+ * the superspeed hub is set configuration in initialization or
+ * reset procedure.
+ *
+ * After a resume, port power should still be on.
* For any other type of activation, turn it on.
*/
if (type != HUB_RESUME) {
+ if (hdev->parent && hub_is_superspeed(hdev)) {
+ ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
+ HUB_SET_DEPTH, USB_RT_HUB,
+ hdev->level - 1, 0, NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+ if (ret < 0)
+ dev_err(hub->intfdev,
+ "set hub depth failed\n");
+ }
/* Speed up system boot by using a delayed_work for the
* hub's initial power-up delays. This is pretty awkward
@@ -813,6 +829,12 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
USB_PORT_FEAT_C_PORT_LINK_STATE);
}
+ if ((portchange & USB_PORT_STAT_C_BH_RESET) &&
+ hub_is_superspeed(hub->hdev)) {
+ need_debounce_delay = true;
+ clear_port_feature(hub->hdev, port1,
+ USB_PORT_FEAT_C_BH_PORT_RESET);
+ }
/* We can forget about a "removed" device when there's a
* physical disconnect or the connect status changes.
*/
@@ -981,18 +1003,6 @@ static int hub_configure(struct usb_hub *hub,
goto fail;
}
- if (hub_is_superspeed(hdev) && (hdev->parent != NULL)) {
- ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
- HUB_SET_DEPTH, USB_RT_HUB,
- hdev->level - 1, 0, NULL, 0,
- USB_CTRL_SET_TIMEOUT);
-
- if (ret < 0) {
- message = "can't set hub depth";
- goto fail;
- }
- }
-
/* Request the entire hub descriptor.
* hub->descriptor can handle USB_MAXCHILDREN ports,
* but the hub can/will return fewer bytes here.
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 81ce6a8..4c65eb6 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -38,6 +38,54 @@ static const struct usb_device_id usb_quirk_list[] = {
/* Creative SB Audigy 2 NX */
{ USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Logitech Webcam C200 */
+ { USB_DEVICE(0x046d, 0x0802), .driver_info = USB_QUIRK_RESET_RESUME },
+
+ /* Logitech Webcam C250 */
+ { USB_DEVICE(0x046d, 0x0804), .driver_info = USB_QUIRK_RESET_RESUME },
+
+ /* Logitech Webcam C300 */
+ { USB_DEVICE(0x046d, 0x0805), .driver_info = USB_QUIRK_RESET_RESUME },
+
+ /* Logitech Webcam B/C500 */
+ { USB_DEVICE(0x046d, 0x0807), .driver_info = USB_QUIRK_RESET_RESUME },
+
+ /* Logitech Webcam C600 */
+ { USB_DEVICE(0x046d, 0x0808), .driver_info = USB_QUIRK_RESET_RESUME },
+
+ /* Logitech Webcam Pro 9000 */
+ { USB_DEVICE(0x046d, 0x0809), .driver_info = USB_QUIRK_RESET_RESUME },
+
+ /* Logitech Webcam C905 */
+ { USB_DEVICE(0x046d, 0x080a), .driver_info = USB_QUIRK_RESET_RESUME },
+
+ /* Logitech Webcam C210 */
+ { USB_DEVICE(0x046d, 0x0819), .driver_info = USB_QUIRK_RESET_RESUME },
+
+ /* Logitech Webcam C260 */
+ { USB_DEVICE(0x046d, 0x081a), .driver_info = USB_QUIRK_RESET_RESUME },
+
+ /* Logitech Webcam C310 */
+ { USB_DEVICE(0x046d, 0x081b), .driver_info = USB_QUIRK_RESET_RESUME },
+
+ /* Logitech Webcam C910 */
+ { USB_DEVICE(0x046d, 0x0821), .driver_info = USB_QUIRK_RESET_RESUME },
+
+ /* Logitech Webcam C160 */
+ { USB_DEVICE(0x046d, 0x0824), .driver_info = USB_QUIRK_RESET_RESUME },
+
+ /* Logitech Webcam C270 */
+ { USB_DEVICE(0x046d, 0x0825), .driver_info = USB_QUIRK_RESET_RESUME },
+
+ /* Logitech Quickcam Pro 9000 */
+ { USB_DEVICE(0x046d, 0x0990), .driver_info = USB_QUIRK_RESET_RESUME },
+
+ /* Logitech Quickcam E3500 */
+ { USB_DEVICE(0x046d, 0x09a4), .driver_info = USB_QUIRK_RESET_RESUME },
+
+ /* Logitech Quickcam Vision Pro */
+ { USB_DEVICE(0x046d, 0x09a6), .driver_info = USB_QUIRK_RESET_RESUME },
+
/* Logitech Harmony 700-series */
{ USB_DEVICE(0x046d, 0xc122), .driver_info = USB_QUIRK_DELAY_INIT },
@@ -69,6 +117,12 @@ static const struct usb_device_id usb_quirk_list[] = {
{ USB_DEVICE(0x06a3, 0x0006), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
+ /* Guillemot Webcam Hercules Dualpix Exchange (2nd ID) */
+ { USB_DEVICE(0x06f8, 0x0804), .driver_info = USB_QUIRK_RESET_RESUME },
+
+ /* Guillemot Webcam Hercules Dualpix Exchange*/
+ { USB_DEVICE(0x06f8, 0x3005), .driver_info = USB_QUIRK_RESET_RESUME },
+
/* M-Systems Flash Disk Pioneers */
{ USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
generated by cgit v1.1 at 2025-01-09 08:25:10 +0000