aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/xhci-hub.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/xhci-hub.c')
-rw-r--r--drivers/usb/host/xhci-hub.c165
1 files changed, 116 insertions, 49 deletions
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index a78f2eb..e3ddc6a 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -50,7 +50,7 @@ static void xhci_common_hub_descriptor(struct xhci_hcd *xhci,
temp |= 0x0008;
/* Bits 6:5 - no TTs in root ports */
/* Bit 7 - no port indicators */
- desc->wHubCharacteristics = (__force __u16) cpu_to_le16(temp);
+ desc->wHubCharacteristics = cpu_to_le16(temp);
}
/* Fill in the USB 2.0 roothub descriptor */
@@ -314,7 +314,7 @@ void xhci_ring_device(struct xhci_hcd *xhci, int slot_id)
}
static void xhci_disable_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
- u16 wIndex, u32 __iomem *addr, u32 port_status)
+ u16 wIndex, __le32 __iomem *addr, u32 port_status)
{
/* Don't allow the USB core to disable SuperSpeed ports. */
if (hcd->speed == HCD_USB3) {
@@ -331,7 +331,7 @@ static void xhci_disable_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
}
static void xhci_clear_port_change_bit(struct xhci_hcd *xhci, u16 wValue,
- u16 wIndex, u32 __iomem *addr, u32 port_status)
+ u16 wIndex, __le32 __iomem *addr, u32 port_status)
{
char *port_change_bit;
u32 status;
@@ -341,6 +341,10 @@ static void xhci_clear_port_change_bit(struct xhci_hcd *xhci, u16 wValue,
status = PORT_RC;
port_change_bit = "reset";
break;
+ case USB_PORT_FEAT_C_BH_PORT_RESET:
+ status = PORT_WRC;
+ port_change_bit = "warm(BH) reset";
+ break;
case USB_PORT_FEAT_C_CONNECTION:
status = PORT_CSC;
port_change_bit = "connect";
@@ -357,6 +361,10 @@ static void xhci_clear_port_change_bit(struct xhci_hcd *xhci, u16 wValue,
status = PORT_PLC;
port_change_bit = "suspend/resume";
break;
+ case USB_PORT_FEAT_C_PORT_LINK_STATE:
+ status = PORT_PLC;
+ port_change_bit = "link state";
+ break;
default:
/* Should never happen */
return;
@@ -376,9 +384,10 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
unsigned long flags;
u32 temp, temp1, status;
int retval = 0;
- u32 __iomem **port_array;
+ __le32 __iomem **port_array;
int slot_id;
struct xhci_bus_state *bus_state;
+ u16 link_state = 0;
if (hcd->speed == HCD_USB3) {
ports = xhci->num_usb3_ports;
@@ -422,9 +431,6 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
}
xhci_dbg(xhci, "get port status, actual port %d status = 0x%x\n", wIndex, temp);
- /* FIXME - should we return a port status value like the USB
- * 3.0 external hubs do?
- */
/* wPortChange bits */
if (temp & PORT_CSC)
status |= USB_PORT_STAT_C_CONNECTION << 16;
@@ -432,13 +438,21 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
status |= USB_PORT_STAT_C_ENABLE << 16;
if ((temp & PORT_OCC))
status |= USB_PORT_STAT_C_OVERCURRENT << 16;
- /*
- * FIXME ignoring reset and USB 2.1/3.0 specific
- * changes
- */
- if ((temp & PORT_PLS_MASK) == XDEV_U3
- && (temp & PORT_POWER))
- status |= 1 << USB_PORT_FEAT_SUSPEND;
+ if ((temp & PORT_RC))
+ status |= USB_PORT_STAT_C_RESET << 16;
+ /* USB3.0 only */
+ if (hcd->speed == HCD_USB3) {
+ if ((temp & PORT_PLC))
+ status |= USB_PORT_STAT_C_LINK_STATE << 16;
+ if ((temp & PORT_WRC))
+ status |= USB_PORT_STAT_C_BH_RESET << 16;
+ }
+
+ if (hcd->speed != HCD_USB3) {
+ if ((temp & PORT_PLS_MASK) == XDEV_U3
+ && (temp & PORT_POWER))
+ status |= USB_PORT_STAT_SUSPEND;
+ }
if ((temp & PORT_PLS_MASK) == XDEV_RESUME) {
if ((temp & PORT_RESET) || !(temp & PORT_PE))
goto error;
@@ -469,7 +483,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
&& (temp & PORT_POWER)
&& (bus_state->suspended_ports & (1 << wIndex))) {
bus_state->suspended_ports &= ~(1 << wIndex);
- bus_state->port_c_suspend |= 1 << wIndex;
+ if (hcd->speed != HCD_USB3)
+ bus_state->port_c_suspend |= 1 << wIndex;
}
if (temp & PORT_CONNECT) {
status |= USB_PORT_STAT_CONNECTION;
@@ -481,14 +496,28 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
status |= USB_PORT_STAT_OVERCURRENT;
if (temp & PORT_RESET)
status |= USB_PORT_STAT_RESET;
- if (temp & PORT_POWER)
- status |= USB_PORT_STAT_POWER;
+ if (temp & PORT_POWER) {
+ if (hcd->speed == HCD_USB3)
+ status |= USB_SS_PORT_STAT_POWER;
+ else
+ status |= USB_PORT_STAT_POWER;
+ }
+ /* Port Link State */
+ if (hcd->speed == HCD_USB3) {
+ /* resume state is a xHCI internal state.
+ * Do not report it to usb core.
+ */
+ if ((temp & PORT_PLS_MASK) != XDEV_RESUME)
+ status |= (temp & PORT_PLS_MASK);
+ }
if (bus_state->port_c_suspend & (1 << wIndex))
status |= 1 << USB_PORT_FEAT_C_SUSPEND;
xhci_dbg(xhci, "Get port status returned 0x%x\n", status);
put_unaligned(cpu_to_le32(status), (__le32 *) buf);
break;
case SetPortFeature:
+ if (wValue == USB_PORT_FEAT_LINK_STATE)
+ link_state = (wIndex & 0xff00) >> 3;
wIndex &= 0xff;
if (!wIndex || wIndex > ports)
goto error;
@@ -537,6 +566,44 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
temp = xhci_readl(xhci, port_array[wIndex]);
bus_state->suspended_ports |= 1 << wIndex;
break;
+ case USB_PORT_FEAT_LINK_STATE:
+ temp = xhci_readl(xhci, port_array[wIndex]);
+ /* Software should not attempt to set
+ * port link state above '5' (Rx.Detect) and the port
+ * must be enabled.
+ */
+ if ((temp & PORT_PE) == 0 ||
+ (link_state > USB_SS_PORT_LS_RX_DETECT)) {
+ xhci_warn(xhci, "Cannot set link state.\n");
+ goto error;
+ }
+
+ if (link_state == USB_SS_PORT_LS_U3) {
+ slot_id = xhci_find_slot_id_by_port(hcd, xhci,
+ wIndex + 1);
+ if (slot_id) {
+ /* unlock to execute stop endpoint
+ * commands */
+ spin_unlock_irqrestore(&xhci->lock,
+ flags);
+ xhci_stop_device(xhci, slot_id, 1);
+ spin_lock_irqsave(&xhci->lock, flags);
+ }
+ }
+
+ temp = xhci_port_state_to_neutral(temp);
+ temp &= ~PORT_PLS_MASK;
+ temp |= PORT_LINK_STROBE | link_state;
+ xhci_writel(xhci, temp, port_array[wIndex]);
+
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ msleep(20); /* wait device to enter */
+ spin_lock_irqsave(&xhci->lock, flags);
+
+ temp = xhci_readl(xhci, port_array[wIndex]);
+ if (link_state == USB_SS_PORT_LS_U3)
+ bus_state->suspended_ports |= 1 << wIndex;
+ break;
case USB_PORT_FEAT_POWER:
/*
* Turn on ports, even if there isn't per-port switching.
@@ -557,6 +624,12 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
temp = xhci_readl(xhci, port_array[wIndex]);
xhci_dbg(xhci, "set port reset, actual port %d status = 0x%x\n", wIndex, temp);
break;
+ case USB_PORT_FEAT_BH_PORT_RESET:
+ temp |= PORT_WR;
+ xhci_writel(xhci, temp, port_array[wIndex]);
+
+ temp = xhci_readl(xhci, port_array[wIndex]);
+ break;
default:
goto error;
}
@@ -584,35 +657,27 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
if (temp & XDEV_U3) {
if ((temp & PORT_PE) == 0)
goto error;
- if (DEV_SUPERSPEED(temp)) {
- temp = xhci_port_state_to_neutral(temp);
- temp &= ~PORT_PLS_MASK;
- temp |= PORT_LINK_STROBE | XDEV_U0;
- xhci_writel(xhci, temp,
- port_array[wIndex]);
- xhci_readl(xhci, port_array[wIndex]);
- } else {
- temp = xhci_port_state_to_neutral(temp);
- temp &= ~PORT_PLS_MASK;
- temp |= PORT_LINK_STROBE | XDEV_RESUME;
- xhci_writel(xhci, temp,
- port_array[wIndex]);
- spin_unlock_irqrestore(&xhci->lock,
- flags);
- msleep(20);
- spin_lock_irqsave(&xhci->lock, flags);
+ temp = xhci_port_state_to_neutral(temp);
+ temp &= ~PORT_PLS_MASK;
+ temp |= PORT_LINK_STROBE | XDEV_RESUME;
+ xhci_writel(xhci, temp,
+ port_array[wIndex]);
- temp = xhci_readl(xhci,
- port_array[wIndex]);
- temp = xhci_port_state_to_neutral(temp);
- temp &= ~PORT_PLS_MASK;
- temp |= PORT_LINK_STROBE | XDEV_U0;
- xhci_writel(xhci, temp,
- port_array[wIndex]);
- }
- bus_state->port_c_suspend |= 1 << wIndex;
+ spin_unlock_irqrestore(&xhci->lock,
+ flags);
+ msleep(20);
+ spin_lock_irqsave(&xhci->lock, flags);
+
+ temp = xhci_readl(xhci,
+ port_array[wIndex]);
+ temp = xhci_port_state_to_neutral(temp);
+ temp &= ~PORT_PLS_MASK;
+ temp |= PORT_LINK_STROBE | XDEV_U0;
+ xhci_writel(xhci, temp,
+ port_array[wIndex]);
}
+ bus_state->port_c_suspend |= 1 << wIndex;
slot_id = xhci_find_slot_id_by_port(hcd, xhci,
wIndex + 1);
@@ -625,9 +690,11 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
case USB_PORT_FEAT_C_SUSPEND:
bus_state->port_c_suspend &= ~(1 << wIndex);
case USB_PORT_FEAT_C_RESET:
+ case USB_PORT_FEAT_C_BH_PORT_RESET:
case USB_PORT_FEAT_C_CONNECTION:
case USB_PORT_FEAT_C_OVER_CURRENT:
case USB_PORT_FEAT_C_ENABLE:
+ case USB_PORT_FEAT_C_PORT_LINK_STATE:
xhci_clear_port_change_bit(xhci, wValue, wIndex,
port_array[wIndex], temp);
break;
@@ -664,7 +731,7 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
int i, retval;
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
int ports;
- u32 __iomem **port_array;
+ __le32 __iomem **port_array;
struct xhci_bus_state *bus_state;
if (hcd->speed == HCD_USB3) {
@@ -681,7 +748,7 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
memset(buf, 0, retval);
status = 0;
- mask = PORT_CSC | PORT_PEC | PORT_OCC;
+ mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC;
spin_lock_irqsave(&xhci->lock, flags);
/* For each port, did anything change? If so, set that bit in buf. */
@@ -709,7 +776,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
int max_ports, port_index;
- u32 __iomem **port_array;
+ __le32 __iomem **port_array;
struct xhci_bus_state *bus_state;
unsigned long flags;
@@ -779,7 +846,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
if (DEV_HIGHSPEED(t1)) {
/* enable remote wake up for USB 2.0 */
- u32 __iomem *addr;
+ __le32 __iomem *addr;
u32 tmp;
/* Add one to the port status register address to get
@@ -801,7 +868,7 @@ int xhci_bus_resume(struct usb_hcd *hcd)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
int max_ports, port_index;
- u32 __iomem **port_array;
+ __le32 __iomem **port_array;
struct xhci_bus_state *bus_state;
u32 temp;
unsigned long flags;
@@ -875,7 +942,7 @@ int xhci_bus_resume(struct usb_hcd *hcd)
if (DEV_HIGHSPEED(temp)) {
/* disable remote wake up for USB 2.0 */
- u32 __iomem *addr;
+ __le32 __iomem *addr;
u32 tmp;
/* Add one to the port status register address to get