diff options
Diffstat (limited to 'drivers/usb/renesas_usbhs/mod.c')
| -rw-r--r-- | drivers/usb/renesas_usbhs/mod.c | 328 |
1 files changed, 328 insertions, 0 deletions
diff --git a/drivers/usb/renesas_usbhs/mod.c b/drivers/usb/renesas_usbhs/mod.c new file mode 100644 index 0000000..a577f8f --- /dev/null +++ b/drivers/usb/renesas_usbhs/mod.c @@ -0,0 +1,328 @@ +/* + * Renesas USB driver + * + * Copyright (C) 2011 Renesas Solutions Corp. + * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ +#include <linux/interrupt.h> + +#include "./common.h" +#include "./mod.h" + +#define usbhs_priv_to_modinfo(priv) (&priv->mod_info) +#define usbhs_mod_info_call(priv, func, param...) \ +({ \ + struct usbhs_mod_info *info; \ + info = usbhs_priv_to_modinfo(priv); \ + !info->func ? 0 : \ + info->func(param); \ +}) + +/* + * autonomy + * + * these functions are used if platform doesn't have external phy. + * -> there is no "notify_hotplug" callback from platform + * -> call "notify_hotplug" by itself + * -> use own interrupt to connect/disconnect + * -> it mean module clock is always ON + * ~~~~~~~~~~~~~~~~~~~~~~~~~ + */ +static int usbhsm_autonomy_get_vbus(struct platform_device *pdev) +{ + struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); + + return VBSTS & usbhs_read(priv, INTSTS0); +} + +static int usbhsm_autonomy_irq_vbus(struct usbhs_priv *priv, + struct usbhs_irq_state *irq_state) +{ + struct platform_device *pdev = usbhs_priv_to_pdev(priv); + + return usbhsc_drvcllbck_notify_hotplug(pdev); +} + +void usbhs_mod_autonomy_mode(struct usbhs_priv *priv) +{ + struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv); + + info->irq_vbus = usbhsm_autonomy_irq_vbus; + priv->pfunc->get_vbus = usbhsm_autonomy_get_vbus; + + usbhs_irq_callback_update(priv, NULL); +} + +/* + * host / gadget functions + * + * renesas_usbhs host/gadget can register itself by below functions. + * these functions are called when probe + * + */ +void usbhs_mod_register(struct usbhs_priv *priv, struct usbhs_mod *mod, int id) +{ + struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv); + + info->mod[id] = mod; + mod->priv = priv; +} + +struct usbhs_mod *usbhs_mod_get(struct usbhs_priv *priv, int id) +{ + struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv); + struct usbhs_mod *ret = NULL; + + switch (id) { + case USBHS_HOST: + case USBHS_GADGET: + ret = info->mod[id]; + break; + } + + return ret; +} + +int usbhs_mod_is_host(struct usbhs_priv *priv, struct usbhs_mod *mod) +{ + struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv); + + if (!mod) + return -EINVAL; + + return info->mod[USBHS_HOST] == mod; +} + +struct usbhs_mod *usbhs_mod_get_current(struct usbhs_priv *priv) +{ + struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv); + + return info->curt; +} + +int usbhs_mod_change(struct usbhs_priv *priv, int id) +{ + struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv); + struct usbhs_mod *mod = NULL; + int ret = 0; + + /* id < 0 mean no current */ + switch (id) { + case USBHS_HOST: + case USBHS_GADGET: + mod = info->mod[id]; + break; + default: + ret = -EINVAL; + } + info->curt = mod; + + return ret; +} + +static irqreturn_t usbhs_interrupt(int irq, void *data); +int usbhs_mod_probe(struct usbhs_priv *priv) +{ + struct device *dev = usbhs_priv_to_dev(priv); + int ret; + + /* + * install host/gadget driver + */ + ret = usbhs_mod_gadget_probe(priv); + if (ret < 0) + return ret; + + /* irq settings */ + ret = request_irq(priv->irq, usbhs_interrupt, + IRQF_DISABLED, dev_name(dev), priv); + if (ret) { + dev_err(dev, "irq request err\n"); + goto mod_init_gadget_err; + } + + return ret; + +mod_init_gadget_err: + usbhs_mod_gadget_remove(priv); + + return ret; +} + +void usbhs_mod_remove(struct usbhs_priv *priv) +{ + usbhs_mod_gadget_remove(priv); + free_irq(priv->irq, priv); +} + +/* + * status functions + */ +int usbhs_status_get_usb_speed(struct usbhs_irq_state *irq_state) +{ + switch (irq_state->dvstctr & RHST) { + case RHST_LOW_SPEED: + return USB_SPEED_LOW; + case RHST_FULL_SPEED: + return USB_SPEED_FULL; + case RHST_HIGH_SPEED: + return USB_SPEED_HIGH; + } + + return USB_SPEED_UNKNOWN; +} + +int usbhs_status_get_device_state(struct usbhs_irq_state *irq_state) +{ + int state = irq_state->intsts0 & DVSQ_MASK; + + switch (state) { + case POWER_STATE: + case DEFAULT_STATE: + case ADDRESS_STATE: + case CONFIGURATION_STATE: + return state; + } + + return -EIO; +} + +int usbhs_status_get_ctrl_stage(struct usbhs_irq_state *irq_state) +{ + /* + * return value + * + * IDLE_SETUP_STAGE + * READ_DATA_STAGE + * READ_STATUS_STAGE + * WRITE_DATA_STAGE + * WRITE_STATUS_STAGE + * NODATA_STATUS_STAGE + * SEQUENCE_ERROR + */ + return (int)irq_state->intsts0 & CTSQ_MASK; +} + +static void usbhs_status_get_each_irq(struct usbhs_priv *priv, + struct usbhs_irq_state *state) +{ + struct usbhs_mod *mod = usbhs_mod_get_current(priv); + + state->intsts0 = usbhs_read(priv, INTSTS0); + state->intsts1 = usbhs_read(priv, INTSTS1); + + state->dvstctr = usbhs_read(priv, DVSTCTR); + + /* mask */ + if (mod) { + state->brdysts = usbhs_read(priv, BRDYSTS); + state->nrdysts = usbhs_read(priv, NRDYSTS); + state->bempsts = usbhs_read(priv, BEMPSTS); + + state->bempsts &= mod->irq_bempsts; + state->brdysts &= mod->irq_brdysts; + } +} + +/* + * interrupt + */ +#define INTSTS0_MAGIC 0xF800 /* acknowledge magical interrupt sources */ +#define INTSTS1_MAGIC 0xA870 /* acknowledge magical interrupt sources */ +static irqreturn_t usbhs_interrupt(int irq, void *data) +{ + struct usbhs_priv *priv = data; + struct usbhs_irq_state irq_state; + + usbhs_status_get_each_irq(priv, &irq_state); + + /* + * clear interrupt + * + * The hardware is _very_ picky to clear interrupt bit. + * Especially INTSTS0_MAGIC, INTSTS1_MAGIC value. + * + * see + * "Operation" + * - "Control Transfer (DCP)" + * - Function :: VALID bit should 0 + */ + usbhs_write(priv, INTSTS0, ~irq_state.intsts0 & INTSTS0_MAGIC); + usbhs_write(priv, INTSTS1, ~irq_state.intsts1 & INTSTS1_MAGIC); + + usbhs_write(priv, BRDYSTS, 0); + usbhs_write(priv, NRDYSTS, 0); + usbhs_write(priv, BEMPSTS, 0); + + /* + * call irq callback functions + * see also + * usbhs_irq_setting_update + */ + if (irq_state.intsts0 & VBINT) + usbhs_mod_info_call(priv, irq_vbus, priv, &irq_state); + + if (irq_state.intsts0 & DVST) + usbhs_mod_call(priv, irq_dev_state, priv, &irq_state); + + if (irq_state.intsts0 & CTRT) + usbhs_mod_call(priv, irq_ctrl_stage, priv, &irq_state); + + if (irq_state.intsts0 & BEMP) + usbhs_mod_call(priv, irq_empty, priv, &irq_state); + + if (irq_state.intsts0 & BRDY) + usbhs_mod_call(priv, irq_ready, priv, &irq_state); + + return IRQ_HANDLED; +} + +void usbhs_irq_callback_update(struct usbhs_priv *priv, struct usbhs_mod *mod) +{ + u16 intenb0 = 0; + struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv); + + usbhs_write(priv, INTENB0, 0); + + usbhs_write(priv, BEMPENB, 0); + usbhs_write(priv, BRDYENB, 0); + + /* + * see also + * usbhs_interrupt + */ + + /* + * it don't enable DVSE (intenb0) here + * but "mod->irq_dev_state" will be called. + */ + if (info->irq_vbus) + intenb0 |= VBSE; + + if (mod) { + if (mod->irq_ctrl_stage) + intenb0 |= CTRE; + + if (mod->irq_empty && mod->irq_bempsts) { + usbhs_write(priv, BEMPENB, mod->irq_bempsts); + intenb0 |= BEMPE; + } + + if (mod->irq_ready && mod->irq_brdysts) { + usbhs_write(priv, BRDYENB, mod->irq_brdysts); + intenb0 |= BRDYE; + } + } + + usbhs_write(priv, INTENB0, intenb0); +} |