4 files changed, 30 insertions, 0 deletions
diff --git a/drivers/media/video/au0828/Kconfig b/drivers/media/video/au0828/Kconfig
index ed9a50f..018f72b 100644
--- a/drivers/media/video/au0828/Kconfig
+++ b/drivers/media/video/au0828/Kconfig
@@ -7,6 +7,7 @@ config VIDEO_AU0828
 	select DVB_AU8522 if !DVB_FE_CUSTOMIZE
 	select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE
 	select MEDIA_TUNER_MXL5007T if !DVB_FE_CUSTOMIZE
+	select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE
 	---help---
 	  This is a video4linux driver for Auvitek's USB device.
 
diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c
index 443e590..14b9fc9 100644
--- a/drivers/media/video/au0828/au0828-cards.c
+++ b/drivers/media/video/au0828/au0828-cards.c
@@ -38,6 +38,9 @@ struct au0828_board au0828_boards[] = {
 	[AU0828_BOARD_DVICO_FUSIONHDTV7] = {
 		.name	= "DViCO FusionHDTV USB",
 	},
+	[AU0828_BOARD_HAUPPAUGE_WOODBURY] = {
+		.name = "Hauppauge Woodbury",
+	},
 };
 
 /* Tuner callback function for au0828 boards. Currently only needed
@@ -115,6 +118,7 @@ void au0828_card_setup(struct au0828_dev *dev)
 	case AU0828_BOARD_HAUPPAUGE_HVR850:
 	case AU0828_BOARD_HAUPPAUGE_HVR950Q:
 	case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
+	case AU0828_BOARD_HAUPPAUGE_WOODBURY:
 		if (dev->i2c_rc == 0)
 			hauppauge_eeprom(dev, eeprom+0xa0);
 		break;
@@ -134,6 +138,7 @@ void au0828_gpio_setup(struct au0828_dev *dev)
 	case AU0828_BOARD_HAUPPAUGE_HVR850:
 	case AU0828_BOARD_HAUPPAUGE_HVR950Q:
 	case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
+	case AU0828_BOARD_HAUPPAUGE_WOODBURY:
 		/* GPIO's
 		 * 4 - CS5340
 		 * 5 - AU8522 Demodulator
@@ -205,6 +210,8 @@ struct usb_device_id au0828_usb_id_table [] = {
 		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
 	{ USB_DEVICE(0x2040, 0x7281),
 		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
+	{ USB_DEVICE(0x2040, 0x8200),
+		.driver_info = AU0828_BOARD_HAUPPAUGE_WOODBURY },
 	{ },
 };
 
diff --git a/drivers/media/video/au0828/au0828-cards.h b/drivers/media/video/au0828/au0828-cards.h
index c37f5fd..102ed03 100644
--- a/drivers/media/video/au0828/au0828-cards.h
+++ b/drivers/media/video/au0828/au0828-cards.h
@@ -24,3 +24,4 @@
 #define AU0828_BOARD_HAUPPAUGE_HVR850 	2
 #define AU0828_BOARD_DVICO_FUSIONHDTV7	3
 #define AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL	4
+#define AU0828_BOARD_HAUPPAUGE_WOODBURY	5
diff --git a/drivers/media/video/au0828/au0828-dvb.c b/drivers/media/video/au0828/au0828-dvb.c
index 584a83a..c862f9e 100644
--- a/drivers/media/video/au0828/au0828-dvb.c
+++ b/drivers/media/video/au0828/au0828-dvb.c
@@ -29,6 +29,7 @@
 #include "au8522.h"
 #include "xc5000.h"
 #include "mxl5007t.h"
+#include "tda18271.h"
 
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
@@ -40,6 +41,13 @@ static struct au8522_config hauppauge_hvr950q_config = {
 	.status_mode   = AU8522_DEMODLOCKING,
 };
 
+static struct au8522_config hauppauge_woodbury_config = {
+	.demod_address = 0x8e >> 1,
+	.status_mode   = AU8522_DEMODLOCKING,
+	.qam_if        = AU8522_IF_4MHZ,
+	.vsb_if        = AU8522_IF_3_25MHZ,
+};
+
 static struct xc5000_config hauppauge_hvr950q_tunerconfig = {
 	.i2c_address      = 0x61,
 	.if_khz           = 6000,
@@ -51,6 +59,10 @@ static struct mxl5007t_config mxl5007t_hvr950q_config = {
 	.if_freq_hz = MxL_IF_6_MHZ,
 };
 
+static struct tda18271_config hauppauge_woodbury_tunerconfig = {
+	.gate    = TDA18271_GATE_DIGITAL,
+};
+
 /*-------------------------------------------------------------------*/
 static void urb_completion(struct urb *purb)
 {
@@ -357,6 +369,15 @@ int au0828_dvb_register(struct au0828_dev *dev)
 				   &dev->i2c_adap, 0x60,
 				   &mxl5007t_hvr950q_config);
 		break;
+	case AU0828_BOARD_HAUPPAUGE_WOODBURY:
+		dvb->frontend = dvb_attach(au8522_attach,
+				&hauppauge_woodbury_config,
+				&dev->i2c_adap);
+		if (dvb->frontend != NULL)
+			dvb_attach(tda18271_attach, dvb->frontend,
+				   0x60, &dev->i2c_adap,
+				   &hauppauge_woodbury_tunerconfig);
+		break;
 	default:
 		printk(KERN_WARNING "The frontend of your DVB/ATSC card "
 		       "isn't supported yet\n");