1 files changed, 0 insertions, 144 deletions
diff --git a/include/asm-sh64/irq.h b/include/asm-sh64/irq.h
deleted file mode 100644
index 5c9e6a8..0000000
--- a/include/asm-sh64/irq.h
+++ /dev/null
@@ -1,144 +0,0 @@
-#ifndef __ASM_SH64_IRQ_H
-#define __ASM_SH64_IRQ_H
-
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * include/asm-sh64/irq.h
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- *
- */
-
-
-/*
- * Encoded IRQs are not considered worth to be supported.
- * Main reason is that there's no per-encoded-interrupt
- * enable/disable mechanism (as there was in SH3/4).
- * An all enabled/all disabled is worth only if there's
- * a cascaded IC to disable/enable/ack on. Until such
- * IC is available there's no such support.
- *
- * Presumably Encoded IRQs may use extra IRQs beyond 64,
- * below. Some logic must be added to cope with IRQ_IRL?
- * in an exclusive way.
- *
- * Priorities are set at Platform level, when IRQ_IRL0-3
- * are set to 0 Encoding is allowed. Otherwise it's not
- * allowed.
- */
-
-/* Independent IRQs */
-#define IRQ_IRL0	0
-#define IRQ_IRL1	1
-#define IRQ_IRL2	2
-#define IRQ_IRL3	3
-
-#define IRQ_INTA	4
-#define IRQ_INTB	5
-#define IRQ_INTC	6
-#define IRQ_INTD	7
-
-#define IRQ_SERR	12
-#define IRQ_ERR		13
-#define IRQ_PWR3	14
-#define IRQ_PWR2	15
-#define IRQ_PWR1	16
-#define IRQ_PWR0	17
-
-#define IRQ_DMTE0	18
-#define IRQ_DMTE1	19
-#define IRQ_DMTE2	20
-#define IRQ_DMTE3	21
-#define IRQ_DAERR	22
-
-#define IRQ_TUNI0	32
-#define IRQ_TUNI1	33
-#define IRQ_TUNI2	34
-#define IRQ_TICPI2	35
-
-#define IRQ_ATI		36
-#define IRQ_PRI		37
-#define IRQ_CUI		38
-
-#define IRQ_ERI		39
-#define IRQ_RXI		40
-#define IRQ_BRI		41
-#define IRQ_TXI		42
-
-#define IRQ_ITI		63
-
-#define NR_INTC_IRQS	64
-
-#ifdef CONFIG_SH_CAYMAN
-#define NR_EXT_IRQS     32
-#define START_EXT_IRQS  64
-
-/* PCI bus 2 uses encoded external interrupts on the Cayman board */
-#define IRQ_P2INTA      (START_EXT_IRQS + (3*8) + 0)
-#define IRQ_P2INTB      (START_EXT_IRQS + (3*8) + 1)
-#define IRQ_P2INTC      (START_EXT_IRQS + (3*8) + 2)
-#define IRQ_P2INTD      (START_EXT_IRQS + (3*8) + 3)
-
-#define I8042_KBD_IRQ	(START_EXT_IRQS + 2)
-#define I8042_AUX_IRQ	(START_EXT_IRQS + 6)
-
-#define IRQ_CFCARD	(START_EXT_IRQS + 7)
-#define IRQ_PCMCIA	(0)
-
-#else
-#define NR_EXT_IRQS	0
-#endif
-
-#define NR_IRQS		(NR_INTC_IRQS+NR_EXT_IRQS)
-
-
-/* Default IRQs, fixed */
-#define TIMER_IRQ	IRQ_TUNI0
-#define RTC_IRQ		IRQ_CUI
-
-/* Default Priorities, Platform may choose differently */
-#define	NO_PRIORITY	0	/* Disabled */
-#define TIMER_PRIORITY	2
-#define RTC_PRIORITY	TIMER_PRIORITY
-#define SCIF_PRIORITY	3
-#define INTD_PRIORITY	3
-#define	IRL3_PRIORITY	4
-#define INTC_PRIORITY	6
-#define	IRL2_PRIORITY	7
-#define INTB_PRIORITY	9
-#define	IRL1_PRIORITY	10
-#define INTA_PRIORITY	12
-#define	IRL0_PRIORITY	13
-#define TOP_PRIORITY	15
-
-extern int intc_evt_to_irq[(0xE20/0x20)+1];
-int intc_irq_describe(char* p, int irq);
-
-#define irq_canonicalize(irq)	(irq)
-
-#ifdef CONFIG_SH_CAYMAN
-int cayman_irq_demux(int evt);
-int cayman_irq_describe(char* p, int irq);
-#define irq_demux(x) cayman_irq_demux(x)
-#define irq_describe(p, x) cayman_irq_describe(p, x)
-#else
-#define irq_demux(x) (intc_evt_to_irq[x])
-#define irq_describe(p, x) intc_irq_describe(p, x)
-#endif
-
-/*
- * Function for "on chip support modules".
- */
-
-/*
- * SH-5 supports Priority based interrupts only.
- * Interrupt priorities are defined at platform level.
- */
-#define set_ipr_data(a, b, c, d)
-#define make_ipr_irq(a)
-#define make_imask_irq(a)
-
-#endif /* __ASM_SH64_IRQ_H */