aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/s390
Commit message (Collapse)AuthorAgeFilesLines
* s390/memory hotplug: prevent offline of active memory incrementsHeiko Carstens2013-05-071-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 94c163663fc1dcfc067a5fb3cc1446b9469975ce upstream. In case a machine supports memory hotplug all active memory increments present at IPL time have been initialized with a "usecount" of 1. This is wrong if the memory increment size is larger than the memory section size of the memory hotplug code. If that is the case the usecount must be initialized with the number of memory sections that fit into one memory increment. Otherwise it is possible to put a memory increment into standby state even if there are still active sections. Afterwards addressing exceptions might happen which cause the kernel to panic. However even worse, if a memory increment was put into standby state and afterwards into active state again, it's contents would have been zeroed, leading to memory corruption. This was only an issue for machines that support standby memory and have at least 256GB memory. This is broken since commit fdb1bb15 "[S390] sclp/memory hotplug: fix initial usecount of increments". Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* KVM: s390: Handle hosts not supporting s390-virtio.Cornelia Huck2013-02-281-8/+30
| | | | | | | | | | | | | | | | | | commit 55c171a6d90dc0574021f9c836127cfd1a7d2e30 upstream. Running under a kvm host does not necessarily imply the presence of a page mapped above the main memory with the virtio information; however, the code includes a hard coded access to that page. Instead, check for the presence of the page and exit gracefully before we hit an addressing exception if it does not exist. Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* s390/cio: fix pgid reserved checkSebastian Ott2013-01-171-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | commit d99e79ec5574fc556c988f613ed6175f6de66f4a upstream. The check to whom a device is reserved is done by checking the path state of the affected channel paths. If it turns out that one path is flagged as reserved by someone else the whole device is marked as such. However the meaning of the RESVD_ELSE bit is that the addressed device is reserved to a different pathgroup (and not reserved to a different LPAR). If we do this test on a path which is currently not a member of the pathgroup we could erroneously mark the device as reserved to someone else. To fix this collect the reserved state for all potential members of the pathgroup and only mark the device as reserved if all of those potential members have the RESVD_ELSE bit set. Acked-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* SCSI: zfcp: only access zfcp_scsi_dev for valid scsi_deviceMartin Peschke2012-10-131-5/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit d436de8ce25f53a8a880a931886821f632247943 upstream. __scsi_remove_device (e.g. due to dev_loss_tmo) calls zfcp_scsi_slave_destroy which in turn sends a close LUN FSF request to the adapter. After 30 seconds without response, zfcp_erp_timeout_handler kicks the ERP thread failing the close LUN ERP action. zfcp_erp_wait in zfcp_erp_lun_shutdown_wait and thus zfcp_scsi_slave_destroy returns and then scsi_device is no longer valid. Sometime later the response to the close LUN FSF request may finally come in. However, commit b62a8d9b45b971a67a0f8413338c230e3117dff5 "[SCSI] zfcp: Use SCSI device data zfcp_scsi_dev instead of zfcp_unit" introduced a number of attempts to unconditionally access struct zfcp_scsi_dev through struct scsi_device causing a use-after-free. This leads to an Oops due to kernel page fault in one of: zfcp_fsf_abort_fcp_command_handler, zfcp_fsf_open_lun_handler, zfcp_fsf_close_lun_handler, zfcp_fsf_req_trace, zfcp_fsf_fcp_handler_common. Move dereferencing of zfcp private data zfcp_scsi_dev allocated in scsi_device via scsi_transport_reserve_device after the check for potentially aborted FSF request and thus no longer valid scsi_device. Only then assign sdev_to_zfcp(sdev) to the local auto variable struct zfcp_scsi_dev *zfcp_sdev. Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* SCSI: zfcp: restore refcount check on port_removeSteffen Maier2012-10-135-12/+45
| | | | | | | | | | | | | | | | | | | | | | commit d99b601b63386f3395dc26a699ae703a273d9982 upstream. Upstream commit f3450c7b917201bb49d67032e9f60d5125675d6a "[SCSI] zfcp: Replace local reference counting with common kref" accidentally dropped a reference count check before tearing down zfcp_ports that are potentially in use by zfcp_units. Even remote ports in use can be removed causing unreachable garbage objects zfcp_ports with zfcp_units. Thus units won't come back even after a manual port_rescan. The kref of zfcp_port->dev.kobj is already used by the driver core. We cannot re-use it to track the number of zfcp_units. Re-introduce our own counter for units per port and check on port_remove. Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* SCSI: zfcp: remove invalid reference to list iterator variableJulia Lawall2012-10-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | commit ca579c9f136af4274ccfd1bcaee7f38a29a0e2e9 upstream. If list_for_each_entry, etc complete a traversal of the list, the iterator variable ends up pointing to an address at an offset from the list head, and not a meaningful structure. Thus this value should not be used after the end of the iterator. Replace port->adapter->scsi_host by adapter->scsi_host. This problem was found using Coccinelle (http://coccinelle.lip6.fr/). Oversight in upsteam commit of v2.6.37 a1ca48319a9aa1c5b57ce142f538e76050bb8972 "[SCSI] zfcp: Move ACL/CFDC code to zfcp_cfdc.c" which merged the content of zfcp_erp_port_access_changed(). Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Reviewed-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* SCSI: zfcp: Do not wakeup while suspendedSteffen Maier2012-10-135-10/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit cb45214960bc989af8b911ebd77da541c797717d upstream. If the mapping of FCP device bus ID and corresponding subchannel is modified while the Linux image is suspended, the resume of FCP devices can fail. During resume, zfcp gets callbacks from cio regarding the modified subchannels but they can be arbitrarily mixed with the restore/resume callback. Since the cio callbacks would trigger adapter recovery, zfcp could wakeup before the resume callback. Therefore, ignore the cio callbacks regarding subchannels while being suspended. We can safely do so, since zfcp does not deal itself with subchannels. For problem determination purposes, we still trace the ignored callback events. The following kernel messages could be seen on resume: kernel: <WWPN>: parent <FCP device bus ID> should not be sleeping As part of adapter reopen recovery, zfcp performs auto port scanning which can erroneously try to register new remote ports with scsi_transport_fc and the device core code complains about the parent (adapter) still sleeping. kernel: zfcp.3dff9c: <FCP device bus ID>:\ Setting up the QDIO connection to the FCP adapter failed <last kernel message repeated 3 more times> kernel: zfcp.574d43: <FCP device bus ID>:\ ERP cannot recover an error on the FCP device In such cases, the adapter gave up recovery and remained blocked along with its child objects: remote ports and LUNs/scsi devices. Even the adapter shutdown as part of giving up recovery failed because the ccw device state remained disconnected. Later, the corresponding remote ports ran into dev_loss_tmo. As a result, the LUNs were erroneously not available again after resume. Even a manually triggered adapter recovery (e.g. sysfs attribute failed, or device offline/online via sysfs) could not recover the adapter due to the remaining disconnected state of the corresponding ccw device. Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* SCSI: zfcp: Make trace record tags uniqueSteffen Maier2012-10-131-2/+2
| | | | | | | | | | | | | | | | | | | commit 0100998dbfe6dfcd90a6e912ca7ed6f255d48f25 upstream. Duplicate fssrh_2 from a54ca0f62f953898b05549391ac2a8a4dad6482b "[SCSI] zfcp: Redesign of the debug tracing for HBA records." complicates distinction of generic status read response from local link up. Duplicate fsscth1 from 2c55b750a884b86dea8b4cc5f15e1484cc47a25c "[SCSI] zfcp: Redesign of the debug tracing for SAN records." complicates distinction of good common transport response from invalid port handle. Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Reviewed-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* compat: Re-add missing asm/compat.h include to fix compile breakage on s390Jiri Slaby2012-03-191-0/+1
| | | | | | | | | | | | | | | | | For 3.0 stable kernel the backport of 048cd4e51d24ebf7f3552226d03c769d6ad91658 "compat: fix compile breakage on s390" breaks compilation... Re-add a single #include <asm/compat.h> in order to fix this. This patch is _not_ necessary for upstream, only for stable kernels which include the "build fix" mentioned above. One fix for arch/s390/kernel/setup.c was already sent and applied. But we need a similar patch for drivers/s390/char/fs3270.c. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* compat: fix compile breakage on s390Heiko Carstens2012-03-126-2/+6
| | | | | | | | | | | | | | | | commit 048cd4e51d24ebf7f3552226d03c769d6ad91658 upstream. The new is_compat_task() define for the !COMPAT case in include/linux/compat.h conflicts with a similar define in arch/s390/include/asm/compat.h. This is the minimal patch which fixes the build issues. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: fix NULL dereferences in check_peer_redir()Eric Dumazet2012-02-131-7/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit d3aaeb38c40e5a6c08dd31a1b64da65c4352be36, along with dependent backports of commits: 69cce1d1404968f78b177a0314f5822d5afdbbfb 9de79c127cccecb11ae6a21ab1499e87aa222880 218fa90f072e4aeff9003d57e390857f4f35513e 580da35a31f91a594f3090b7a2c39b85cb051a12 f7e57044eeb1841847c24aa06766c8290c202583 e049f28883126c689cf95859480d9ee4ab23b7fa ] Gergely Kalman reported crashes in check_peer_redir(). It appears commit f39925dbde778 (ipv4: Cache learned redirect information in inetpeer.) added a race, leading to possible NULL ptr dereference. Since we can now change dst neighbour, we should make sure a reader can safely use a neighbour. Add RCU protection to dst neighbour, and make sure check_peer_redir() can be called safely by different cpus in parallel. As neighbours are already freed after one RCU grace period, this patch should not add typical RCU penalty (cache cold effects) Many thanks to Gergely for providing a pretty report pointing to the bug. Reported-by: Gergely Kalman <synapse@hippy.csoma.elte.hu> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* SCSI: zfcp: return early from slave_destroy if slave_alloc returned earlySteffen Maier2012-01-061-0/+4
| | | | | | | | | | | | | | | | | | | | | | commit 44f747fff6e9f027a4866c1a6864e26ae7c510c8 upstream. zfcp_scsi_slave_destroy erroneously always tried to finish its task even if the corresponding previous zfcp_scsi_slave_alloc returned early. This can lead to kernel page faults on accessing uninitialized fields of struct zfcp_scsi_dev in zfcp_erp_lun_shutdown_wait. Take the port field of the struct to determine if slave_alloc returned early. This zfcp bug is exposed by 4e6c82b (in turn fixing f7c9c6b to be compatible with 21208ae) which can call slave_destroy for a corresponding previous slave_alloc that did not finish. This patch is based on James Bottomley's fix suggestion in http://www.spinics.net/lists/linux-scsi/msg55449.html. Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* ccwgroup: move attributes to attribute groupSebastian Ott2011-11-111-20/+22
| | | | | | | | | | | | | commit dbdf1afcaaabe83dea15a3cb9b9013e73ae3b1ad upstream. Put sysfs attributes of ccwgroup devices in an attribute group to ensure that these attributes are actually present when userspace is notified via uevents. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* qdio: clear shared DSCI before scheduling the queue handlerJan Glauber2011-10-031-10/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit b02f0c2ea25781e0f94b4fc8f6f85582057857b3 upstream. The following race can occur with qdio devices that use the shared device state change indicator: Device (Shared DSCI) CPU0 CPU1 =============================================================================== 1. DSCI 0 => 1, INT pending 2. Thinint handler * si_used = 1 * Inbound tasklet_schedule * DSCI 1 => 0 3. DSCI 0 => 1, INT pending 4. Thinint handler * si_used = 1 * Inbound tasklet_schedu le => NOP 5. Inbound tasklet run 6. DSCI = 1, INT surpressed 7. DSCI 1 => 0 The race would lead to a stall where new data in the input queue is not recognized so the device stops working in case of no further traffic. Fix the race by resetting the DSCI before scheduling the inbound tasklet so the device generates an interrupt if new data arrives in the above scenario in step 6. Reviewed-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [S390] qdio: Split SBAL entry flagsJan Glauber2011-06-066-62/+68
| | | | | | | | | | | | | The qdio SBAL entry flag is made-up of four different values that are independent of one another. Some of the bits are reserved by the hardware and should not be changed by qdio. Currently all four values are overwritten since the SBAL entry flag is defined as an u32. Split the SBAL entry flag into four u8's as defined by the hardware and don't touch the reserved bits. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] irq: merge irq.c and s390_ext.cHeiko Carstens2011-05-263-3/+1
| | | | | | | | Merge irq.c and s390_ext.c into irq.c. That way all external interrupt related functions are together. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] irq: fix service signal external interrupt handlingHeiko Carstens2011-05-263-6/+6
| | | | | | | | | | | | | | | | | Interrupt sources like pfault, sclp, dasd_diag and virtio all use the service signal external interrupt subclass mask in control register 0 to enable and disable the corresponding interrupt. Because no reference counting is implemented each subsystem thinks it is the only user of subclass and sets and clears the bit like it wants. This leads to case that unloading the dasd diag module under z/VM causes both sclp and pfault interrupts to be masked. The result will be locked up system sooner or later. Fix this by introducing a new way to set (register) and clear (unregister) the service signal subclass mask bit in cr0. Also convert all drivers. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] get CPC image nameMartin Schwidefsky2011-05-233-1/+148
| | | | | | | | | Provide sysfs attributes that contain the CPC name and the HMC network name of the machine the operating system is running on. This information is retrieved with the operation communication parameters (OCF) sclp interface. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] sclp: event buffer dissectionMartin Schwidefsky2011-05-232-84/+60
| | | | | | | Move gds vector/subvector find functions to the sclp header file. Simplify event buffer dissection in sclp tty code. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] chsc: process channel-path-availability informationSebastian Ott2011-05-231-1/+34
| | | | | | | | Update affected channel path descriptors when receiving channel path availability information. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: prevent compile warningJan Glauber2011-05-231-1/+1
| | | | | | | | | | | Prevent the following compile warning for !CONFIG_64BIT: CC drivers/s390/cio/qdio_main.o drivers/s390/cio/qdio_main.c: In function ‘handle_outbound’: drivers/s390/cio/qdio_main.c:1449: warning: ‘state’ may be used uninitialized in this function Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] sclp: remove unnecessary sendmask checkHeiko Carstens2011-05-231-13/+1
| | | | | | | The sendmask check is not needed. Remove it. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] ap: skip device registration on type probe failureHolger Dengler2011-05-231-2/+6
| | | | | | | | | The registration of an ap device will be skipped, if the device type probing fails. Add names of current crypto adapters to the Kconfig help. Signed-off-by: Holger Dengler <hd@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] tape: remove unused/not handled return codesHeiko Carstens2011-05-232-6/+2
| | | | | | | | Return codes are on purpose not handled or used. So remove them. Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] monwriter: fix return code handlingHeiko Carstens2011-05-231-2/+2
| | | | | | | | | Fix return code handling within monwrite_new_hdr(). Return code handling is everwhere implemented, the return code of the diagnose function was just not passed. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] dasd: fix return code handlingHeiko Carstens2011-05-231-2/+1
| | | | | | | Check return value of itcw_add_dcw() for error code and return it. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] get rid of unused variablesHeiko Carstens2011-05-237-29/+0
| | | | | | | Remove trivially unused variables as detected with -Wunused-but-set-variable. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] Remove tape block device driver.Heiko Carstens2011-05-233-457/+0
| | | | | | | | | | | | | Remove the tape block device driver. It's not of real use but has already created some confusion when users wanted to access tape devices and used the block device nodes instead of the character device nodes. Also remove the whole tape documentation since it's completely outdated and we have the device drivers book which is the place where everything is properly documented. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] cio: fix unreg race in set_online pathSebastian Ott2011-05-231-2/+3
| | | | | | | | | | | | | | | | In ccw_device_set_online we basically start path verification and wait for the device to reach a final state. If it turns out that the device has no useable path we schedule the deregistration of the device (which is still in an non-final state) and wake up the waiting process. The deregistration process will set a final state, but if the wake up happens to be prior to this, the device will hang forever in ccw_device_set_online. To fix this just set the final NOT_OPER state prior to the scheduled deregistration of the device. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds2011-05-2013-349/+341
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1446 commits) macvlan: fix panic if lowerdev in a bond tg3: Add braces around 5906 workaround. tg3: Fix NETIF_F_LOOPBACK error macvlan: remove one synchronize_rcu() call networking: NET_CLS_ROUTE4 depends on INET irda: Fix error propagation in ircomm_lmp_connect_response() irda: Kill set but unused variable 'bytes' in irlan_check_command_param() irda: Kill set but unused variable 'clen' in ircomm_connect_indication() rxrpc: Fix set but unused variable 'usage' in rxrpc_get_transport() be2net: Kill set but unused variable 'req' in lancer_fw_download() irda: Kill set but unused vars 'saddr' and 'daddr' in irlan_provider_connect_indication() atl1c: atl1c_resume() is only used when CONFIG_PM_SLEEP is defined. rxrpc: Fix set but unused variable 'usage' in rxrpc_get_peer(). rxrpc: Kill set but unused variable 'local' in rxrpc_UDP_error_handler() rxrpc: Kill set but unused variable 'sp' in rxrpc_process_connection() rxrpc: Kill set but unused variable 'sp' in rxrpc_rotate_tx_window() pkt_sched: Kill set but unused variable 'protocol' in tc_classify() isdn: capi: Use pr_debug() instead of ifdefs. tg3: Update version to 3.119 tg3: Apply rx_discards fix to 5719/5720 ... Fix up trivial conflicts in arch/x86/Kconfig and net/mac80211/agg-tx.c as per Davem.
| * qeth: use ndo_set_features callback for initial setup and recoveryFrank Blaschka2011-05-181-52/+25
| | | | | | | | | | | | | | | | | | | | This patch uses the ndo_set_features callback during normal device startup or recovery to turn on hardware RX checksum. Patch was done with much help from Michal Miroslaw, thx!!! Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ctcm: get rid of compile warningUrsula Braun2011-05-132-11/+4
| | | | | | | | | | | | | | | | | | -Wunused-but-set-variable generates compile warnings. The affected variables are removed. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * lcs: get rid of compile warningHeiko Carstens2011-05-131-7/+3
| | | | | | | | | | | | | | | | | | | | -Wunused-but-set-variable generates a compile warning for lcs' tasklet function. Invoked functions contain already error handling; thus additional return code checking is not needed here. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * claw: remove unused return code handlingHeiko Carstens2011-05-131-19/+3
| | | | | | | | | | | | | | | | | | Remove unused return code handling. The claw driver is mostly dead, so just make sure it keeps compiling without warnings. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * qeth: add owner to ccw driverSebastian Ott2011-05-131-0/+1
| | | | | | | | | | | | | | | | Fill in the owner of qeth's ccw device driver. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * qeth: add OSA concurrent hardware trapFrank Blaschka2011-05-136-37/+268
| | | | | | | | | | | | | | | | | | This patch improves FFDC (first failure data capture) by requesting a hardware trace in case the device driver, the hardware or a user detects an error. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * qeth: convert to hw_features part 2Frank Blaschka2011-05-137-178/+49
| | | | | | | | | | | | | | | | | | | | Set rx csum default to hw checksumming again. Remove sysfs interface for rx csum (checksumming) and TSO (large_send). With the new hw_features it does not work to keep the old sysfs interface in parallel. Convert options.checksum_type to new hw_features. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: call dev_alloc_name from register_netdeviceJiri Pirko2011-05-051-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Force dev_alloc_name() to be called from register_netdevice() by dev_get_valid_name(). That allows to remove multiple explicit dev_alloc_name() calls. The possibility to call dev_alloc_name in advance remains. This also fixes veth creation regresion caused by 84c49d8c3e4abefb0a41a77b25aa37ebe8d6b743 Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: s390: convert to hw_featuresMichał Mirosław2011-04-203-107/+52
| | | | | | | | | | | | | | | | options.large_send was easy to get rid of. options.checksum_type has deeper roots so is left for later cleanup. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds2011-05-181-1/+0
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: don't delay blk_run_queue_async scsi: remove performance regression due to async queue run blk-throttle: Use task_subsys_state() to determine a task's blkio_cgroup block: rescan partitions on invalidated devices on -ENOMEDIA too cdrom: always check_disk_change() on open block: unexport DISK_EVENT_MEDIA_CHANGE for legacy/fringe drivers
| * | block: unexport DISK_EVENT_MEDIA_CHANGE for legacy/fringe driversTejun Heo2011-04-211-1/+0
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | In-kernel disk event polling doesn't matter for legacy/fringe drivers and may lead to infinite event loop if ->check_events() implementation generates events on level condition instead of edge. Now that block layer supports suppressing exporting unlisted events, simply leaving disk->events cleared allows these drivers to keep the internal revalidation behavior intact while avoiding weird interactions with userland event handler. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* | [S390] dasd: prevent IO error during reserve/release loopStefan Haberland2011-05-101-1/+10
| | | | | | | | | | | | | | | | | | The termination of running CQR caused by reserve/release operations may lead to an IO error if reserve/release is done in a tight loop. Prevent this by increasing the retry counter after termination. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] sclp/memory hotplug: fix initial usecount of incrementsHeiko Carstens2011-05-101-0/+2
| | | | | | | | | | | | | | | | Fix initial usecount of attached and assigned storage increments so they can be set offline. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] irqstats: fix counting of pfault, dasd diag and virtio irqsHeiko Carstens2011-04-292-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | pfault, dasd diag and virtio all use the same external interrupt number. The respective interrupt handlers decide by the subcode if they are meant to handle the interrupt. Counting is currently done before looking at the subcode which means each handler counts an interrupt even if it is not handling it. Fix this by moving the kstat code after the code which looks at the subcode. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] dasd: check sense type in device change handlerStefan Weinhuber2011-04-201-2/+3
| | | | | | | | | | | | | | | | | | When evaluating sense data in dasd_eckd_check_for_device_change, we must always check for the type of sense data in byte 27, bit 0, to make sure that the rest of the sense data is interpreted correctly. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] qdio: reset error states immediatelyJan Glauber2011-04-201-5/+12
| | | | | | | | | | | | | | | | | | | | | | The qdio hardware may surpress further interrupts as long as a SBAL is in the error state. That can lead to unnotified data in the SBALs following the error state. To prevent this behaviour change the SBAL[s] in error state immediately to another program owned state so interrupts are again received for further traffic on the device. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] dasd: fix race between open and offlineStefan Weinhuber2011-04-205-60/+143
|/ | | | | | | | | | | | | | | | | | The dasd_open function uses the private_data pointer of the gendisk to find the dasd_block structure that matches the gendisk. When a DASD device is set offline, we set the private_data pointer of the gendisk to NULL and later remove the dasd_block structure, but there is still a small race window, in which dasd_open could first read a pointer from the private_data field and then try to use it, after the structure has already been freed. To close this race window, we will store a pointer to the dasd_devmap structure of the base device in the private_data field. The devmap entries are not deleted, and we already have proper locking and reference counting in place, so that we can safely get from a devmap pointer to the dasd_device and dasd_block structures of the device. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds2011-04-082-14/+26
|\ | | | | | | | | | | | | | | | | * 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] compile fix for latest binutils [S390] cio: prevent purging of CCW devices in the online state [S390] qdio: fix init sequence [S390] Fix parameter passing for smp_switch_to_cpu() [S390] oprofile s390: prevent stack corruption
| * [S390] cio: prevent purging of CCW devices in the online statePeter Oberparleiter2011-04-041-6/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The cio_ignore purge function is intended to only remove CCW devices which are in the offline state. There is a time frame after the purge function finished where a CCW device is scheduled for removal but still accessible. When the device is set online during this time frame, it may first appear online before it is then removed. Fix this by preventing that CCW devices can be set online while there is work (such as removal triggered by the purge function) for it pending. Also ensure that the purge function does not schedule devices for removal which are in the process of being set online. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * [S390] qdio: fix init sequenceSebastian Ott2011-04-041-8/+8
| | | | | | | | | | | | | | | | | | Reorder the initialization sequence of the qdio module to avoid writing to an uninitialized debug feature entry. Also reorder the exit function to restore a consistent cleanup path. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
generated by cgit v1.1 at 2024-12-27 06:34:55 +0000