aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb
Commit message (Collapse)AuthorAgeFilesLines
* Merge tag 'v3.0.84' of ↵Chirayu Desai2013-06-292-2/+5
|\ | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable into HEAD This is the 3.0.84 stable release
| * USB: serial: ti_usb_3410_5052: new device id for Abbot strip port cableAnders Hammarquist2013-06-272-2/+5
| | | | | | | | | | | | | | | | | | | | | | commit 35a2fbc941accd0e9f1bfadd669311786118d874 upstream. Add product id for Abbott strip port cable for Precision meter which uses the TI 3410 chip. Signed-off-by: Anders Hammarquist <iko@iko.pp.se> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge tag 'v3.0.82' of ↵Chirayu Desai2013-06-1611-14/+52
|\ \ | |/ | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable into HEAD This is the 3.0.82 stable release
| * USB: ftdi_sio: Quiet sparse noise about using plain integer was NULL pointerYing Xue2013-06-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | commit a816e3113b63753c330ca4751ea1d208e93e3015 upstream. Pointers should not be compared to plain integers. Quiets the sparse warning: warning: Using plain integer as NULL pointer Signed-off-by: Ying Xue <ying.xue@windriver.com> Cc: Lotfi Manseur <lotfi.manseur@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: serial: ftdi_sio: Handle the old_termios == 0 case e.g. uart_resume_port()Andrew Worsley2013-06-131-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | commit c515598e0f5769916c31c00392cc2bfe6af74e55 upstream. Handle null old_termios in ftdi_set_termios() calls from uart_resume_port(). Signed-off-by: Andrew Worsley <amworsley@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Cc: Lotfi Manseur <lotfi.manseur@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: mos7720: fix hardware flow controlJohan Hovold2013-06-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | commit a26f009a070e840fadacb91013b2391ba7ab6cc2 upstream. The register access to enable hardware flow control depends on the device port number and not the port minor number. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: mos7720: fix message timeoutsJohan Hovold2013-06-131-3/+3
| | | | | | | | | | | | | | | | | | | | | | commit 849513a7809175420d353625b6f651d961e99d49 upstream. The control and bulk-message timeouts are specified in milliseconds and should not depend on HZ. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: mos7720: fix DMA to stackJohan Hovold2013-06-131-3/+14
| | | | | | | | | | | | | | | | | | | | | | commit 72ea18a558ed7a63a50bb121ba60d73b5b38ae30 upstream. The read_mos_reg function is called with stack-allocated buffers, which must not be used for control messages. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: revert periodic scheduling bugfixAlan Stern2013-06-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit fdc03438f53a00294ed9939eb3a1f6db6f3d8963 upstream. This patch reverts commit 3e619d04159be54b3daa0b7036b0ce9e067f4b5d (USB: EHCI: fix bug in scheduling periodic split transfers). The commit was valid -- it fixed a real bug -- but the periodic scheduler in ehci-hcd is in such bad shape (especially the part that handles split transactions) that fixing one bug is very likely to cause another to surface. That's what happened in this case; the result was choppy and noisy playback on certain 24-bit audio devices. The only real fix will be to rewrite this entire section of code. My next project... This fixes https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1136110. Thanks to Tim Richardson for extra testing and feedback, and to Joseph Salisbury and Tyson Tan for tracking down the original source of the problem. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Joseph Salisbury <joseph.salisbury@canonical.com> CC: Tim Richardson <tim@tim-richardson.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: serial: fix Treo/Kyocera interrrupt-in urb contextJohan Hovold2013-06-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | commit 5f8e2c07d75967ee49a5da1d21ddf5f50d48cda0 upstream. The first and second interrupt-in urbs are swapped for some Treo/Kyocera devices, but the urb context was never updated with the new port. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: whiteheat: fix broken port configurationJohan Hovold2013-06-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | commit 9eecf22d2b375b9064a20421c6c307b760b03d46 upstream. When configuring the port (e.g. set_termios) the port minor number rather than the port number was used in the request (and they only coincide for minor number 0). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: Serial: cypress_M8: Enable FRWD Dongle hidcom deviceRobert Butora2013-06-132-1/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 6529591e3eef65f0f528a81ac169f6e294b947a7 upstream. The patch adds a new HIDCOM device and does not affect other devices driven by the cypress_M8 module. Changes are: - add VendorID ProductID to device tables - skip unstable speed check because FRWD uses 115200bps - skip reset at probe which is an issue workaround for this particular device. Signed-off-by: Robert Butora <robert.butora.fi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: ark3116: fix control-message timeoutJohan Hovold2013-06-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | commit 634371911730a462626071065b64cd6e1fe213e0 upstream. The control-message timeout is specified in milliseconds and should not depend on HZ. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: keyspan: fix bogus array indexJohan Hovold2013-06-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | commit a07088098a650267b2eda689538133a324b9523f upstream. The outcont_endpoints array was indexed using the port minor number (which can be greater than the array size) rather than the device port number. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: iuu_phoenix: fix bulk-message timeoutJohan Hovold2013-06-131-2/+2
| | | | | | | | | | | | | | | | | | | | | | commit 6c13ff68a7ce01da7a51b44241a7aad8eaaedde7 upstream. The bulk-message timeout is specified in milliseconds and should not depend on HZ. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: option: blacklist network interface on Huawei E1820Bjørn Mork2013-06-131-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | commit b8a24e6281d37243c06b9497dcbfaa98c1e2ad35 upstream. The mode used by Windows for the Huawei E1820 will use the same ff/ff/ff class codes for both serial and network functions. Reported-by: Graham Inggs <graham.inggs@uct.ac.za> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge tag 'v3.0.81' of ↵Chirayu Desai2013-06-087-6/+23
|\ \ | |/ | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable into HEAD This is the 3.0.81 stable release
| * USB: io_ti: Fix NULL dereference in chase_port()Wolfgang Frisch2013-06-071-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 1ee0a224bc9aad1de496c795f96bc6ba2c394811 upstream. The tty is NULL when the port is hanging up. chase_port() needs to check for this. This patch is intended for stable series. The behavior was observed and tested in Linux 3.2 and 3.7.1. Johan Hovold submitted a more elaborate patch for the mainline kernel. [ 56.277883] usb 1-1: edge_bulk_in_callback - nonzero read bulk status received: -84 [ 56.278811] usb 1-1: USB disconnect, device number 3 [ 56.278856] usb 1-1: edge_bulk_in_callback - stopping read! [ 56.279562] BUG: unable to handle kernel NULL pointer dereference at 00000000000001c8 [ 56.280536] IP: [<ffffffff8144e62a>] _raw_spin_lock_irqsave+0x19/0x35 [ 56.281212] PGD 1dc1b067 PUD 1e0f7067 PMD 0 [ 56.282085] Oops: 0002 [#1] SMP [ 56.282744] Modules linked in: [ 56.283512] CPU 1 [ 56.283512] Pid: 25, comm: khubd Not tainted 3.7.1 #1 innotek GmbH VirtualBox/VirtualBox [ 56.283512] RIP: 0010:[<ffffffff8144e62a>] [<ffffffff8144e62a>] _raw_spin_lock_irqsave+0x19/0x35 [ 56.283512] RSP: 0018:ffff88001fa99ab0 EFLAGS: 00010046 [ 56.283512] RAX: 0000000000000046 RBX: 00000000000001c8 RCX: 0000000000640064 [ 56.283512] RDX: 0000000000010000 RSI: ffff88001fa99b20 RDI: 00000000000001c8 [ 56.283512] RBP: ffff88001fa99b20 R08: 0000000000000000 R09: 0000000000000000 [ 56.283512] R10: 0000000000000000 R11: ffffffff812fcb4c R12: ffff88001ddf53c0 [ 56.283512] R13: 0000000000000000 R14: 00000000000001c8 R15: ffff88001e19b9f4 [ 56.283512] FS: 0000000000000000(0000) GS:ffff88001fd00000(0000) knlGS:0000000000000000 [ 56.283512] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 56.283512] CR2: 00000000000001c8 CR3: 000000001dc51000 CR4: 00000000000006e0 [ 56.283512] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 56.283512] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 56.283512] Process khubd (pid: 25, threadinfo ffff88001fa98000, task ffff88001fa94f80) [ 56.283512] Stack: [ 56.283512] 0000000000000046 00000000000001c8 ffffffff810578ec ffffffff812fcb4c [ 56.283512] ffff88001e19b980 0000000000002710 ffffffff812ffe81 0000000000000001 [ 56.283512] ffff88001fa94f80 0000000000000202 ffffffff00000001 0000000000000296 [ 56.283512] Call Trace: [ 56.283512] [<ffffffff810578ec>] ? add_wait_queue+0x12/0x3c [ 56.283512] [<ffffffff812fcb4c>] ? usb_serial_port_work+0x28/0x28 [ 56.283512] [<ffffffff812ffe81>] ? chase_port+0x84/0x2d6 [ 56.283512] [<ffffffff81063f27>] ? try_to_wake_up+0x199/0x199 [ 56.283512] [<ffffffff81263a5c>] ? tty_ldisc_hangup+0x222/0x298 [ 56.283512] [<ffffffff81300171>] ? edge_close+0x64/0x129 [ 56.283512] [<ffffffff810612f7>] ? __wake_up+0x35/0x46 [ 56.283512] [<ffffffff8106135b>] ? should_resched+0x5/0x23 [ 56.283512] [<ffffffff81264916>] ? tty_port_shutdown+0x39/0x44 [ 56.283512] [<ffffffff812fcb4c>] ? usb_serial_port_work+0x28/0x28 [ 56.283512] [<ffffffff8125d38c>] ? __tty_hangup+0x307/0x351 [ 56.283512] [<ffffffff812e6ddc>] ? usb_hcd_flush_endpoint+0xde/0xed [ 56.283512] [<ffffffff8144e625>] ? _raw_spin_lock_irqsave+0x14/0x35 [ 56.283512] [<ffffffff812fd361>] ? usb_serial_disconnect+0x57/0xc2 [ 56.283512] [<ffffffff812ea99b>] ? usb_unbind_interface+0x5c/0x131 [ 56.283512] [<ffffffff8128d738>] ? __device_release_driver+0x7f/0xd5 [ 56.283512] [<ffffffff8128d9cd>] ? device_release_driver+0x1a/0x25 [ 56.283512] [<ffffffff8128d393>] ? bus_remove_device+0xd2/0xe7 [ 56.283512] [<ffffffff8128b7a3>] ? device_del+0x119/0x167 [ 56.283512] [<ffffffff812e8d9d>] ? usb_disable_device+0x6a/0x180 [ 56.283512] [<ffffffff812e2ae0>] ? usb_disconnect+0x81/0xe6 [ 56.283512] [<ffffffff812e4435>] ? hub_thread+0x577/0xe82 [ 56.283512] [<ffffffff8144daa7>] ? __schedule+0x490/0x4be [ 56.283512] [<ffffffff8105798f>] ? abort_exclusive_wait+0x79/0x79 [ 56.283512] [<ffffffff812e3ebe>] ? usb_remote_wakeup+0x2f/0x2f [ 56.283512] [<ffffffff812e3ebe>] ? usb_remote_wakeup+0x2f/0x2f [ 56.283512] [<ffffffff810570b4>] ? kthread+0x81/0x89 [ 56.283512] [<ffffffff81057033>] ? __kthread_parkme+0x5c/0x5c [ 56.283512] [<ffffffff8145387c>] ? ret_from_fork+0x7c/0xb0 [ 56.283512] [<ffffffff81057033>] ? __kthread_parkme+0x5c/0x5c [ 56.283512] Code: 8b 7c 24 08 e8 17 0b c3 ff 48 8b 04 24 48 83 c4 10 c3 53 48 89 fb 41 50 e8 e0 0a c3 ff 48 89 04 24 e8 e7 0a c3 ff ba 00 00 01 00 <f0> 0f c1 13 48 8b 04 24 89 d1 c1 ea 10 66 39 d1 74 07 f3 90 66 [ 56.283512] RIP [<ffffffff8144e62a>] _raw_spin_lock_irqsave+0x19/0x35 [ 56.283512] RSP <ffff88001fa99ab0> [ 56.283512] CR2: 00000000000001c8 [ 56.283512] ---[ end trace 49714df27e1679ce ]--- Signed-off-by: Wolfgang Frisch <wfpub@roembden.net> Cc: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: UHCI: fix for suspend of virtual HP controllerAlan Stern2013-06-071-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 997ff893603c6455da4c5e26ba1d0f81adfecdfc upstream. HP's virtual UHCI host controller takes a long time to suspend (several hundred microseconds), even when no devices are attached. This provokes a warning message from uhci-hcd in the auto-stop case. To prevent this from happening, this patch adds a test to avoid performing an auto-stop when the wait_for_hp quirk flag is set. The controller will still suspend through the normal runtime PM mechanism. And since that pathway includes a 1-ms delay, the slowness of the virtual hardware won't matter. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: ZhenHua <zhen-hual@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: reset resume quirk needed by a hubOliver Neukum2013-06-071-0/+3
| | | | | | | | | | | | | | | | | | | | commit bac6b03275184c912ad0818c9a0a736847804dca upstream. Werner Fink has reported problems with this hub. Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: Blacklisted Cinterion's PLxx WWAN InterfaceSchemmel Hans-Christoph2013-06-071-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | commit 8ff10bdb14a52e3f25d4ce09e0582a8684c1a6db upstream. /drivers/usb/serial/option.c: Blacklisted Cinterion's PLxx WWAN Interface (USB Interface 4), because it will be handled by QMI WWAN driver. Product IDs renamed. Signed-off-by: Hans-Christoph Schemmel <hans-christoph.schemmel@gemalto.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: cxacru: potential underflow in cxacru_cm_get_array()Dan Carpenter2013-06-071-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | commit 2a0ebf80aa95cc758d4725f74a7016e992606a39 upstream. The value of "offd" comes off the instance->rcv_buf[] and we used it as the offset into an array. The problem is that we check the upper bound but not for negative values. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: ftdi_sio: Add support for Newport CONEX motor driversGomella, Andrew (NIH/NHLBI) [F]2013-06-072-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 7138143972b7c293267c783fc99a194f0ceff7f2 upstream. Here are two more devices that use FTDI USB-to-serial chips with new product ID's. The devices are the Newport Conex-AGP and Conex-CC motor controllers. (http://www.newport.com/CONEX-AGP-Integrated-Piezo-Motor-Rotation-Stages-/987623/1033/info.aspx) (http://www.newport.com/CONEX-CC-DC-Servo-Controller-Actuators/934114/1033/info.aspx) usb-devices command yields: P: Vendor=104d ProdID=3002 Rev=06.00 S: Manufacturer=Newport S: Product=CONEX-CC as well as P: Vendor=104d ProdID=3006 Rev=06.00 S: Manufacturer=Newport S: Product=CONEX-AGP Signed-off-by: Andrew Gomella <andrew.gomella@nih.gov> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: option: add device IDs for Dell 5804 (Novatel E371) WWAN cardDan Williams2013-06-071-0/+2
| | | | | | | | | | | | | | | | | | | | commit 49c6e370dd6400b84897c4100095089b5c13a061 upstream. A rebranded Novatel E371 for AT&T's LTE bands. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: option: Add Telewell TW-LTE 4GTeppo Kotilainen2013-06-071-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 73c042df6e1bc50544842a04b777b36bbe3630e6 upstream. Information from driver description files: diag: VID_19D2&PID_0412&MI_00 nmea: VID_19D2&PID_0412&MI_01 at: VID_19D2&PID_0412&MI_02 modem: VID_19D2&PID_0412&MI_03 net: VID_19D2&PID_0412&MI_04 Signed-off-by: Teppo Kotilainen <qubit303@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge tag 'v3.0.77' of ↵Chirayu Desai2013-05-096-4/+32
|\ \ | |/ | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable into HEAD This is the 3.0.77 stable release
| * usb-storage: CY7C68300A chips do not support Cypress ATACBTormod Volden2013-05-071-2/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 671b4b2ba9266cbcfe7210a704e9ea487dcaa988 upstream. Many cards based on CY7C68300A/B/C use the USB ID 04b4:6830 but only the B and C variants (EZ-USB AT2LP) support the ATA Command Block functionality, according to the data sheets. The A variant (EZ-USB AT2) locks up if ATACB is attempted, until a typical 30 seconds timeout runs out and a USB reset is performed. https://bugs.launchpad.net/bugs/428469 It seems that one way to spot a CY7C68300A (at least where the card manufacturer left Cypress' EEPROM default vaules, against Cypress' recommendations) is to look at the USB string descriptor indices. A http://media.digikey.com/pdf/Data%20Sheets/Cypress%20PDFs/CY7C68300A.pdf B http://www.farnell.com/datasheets/43456.pdf C http://www.cypress.com/?rID=14189 Note that a CY7C68300B/C chip appears as CY7C68300A if it is running in Backward Compatibility Mode, and if ATACB would be supported in this case there is anyway no way to tell which chip it really is. For 5 years my external USB drive has been locking up for half a minute when plugged in and ata_id is run by udev, or anytime hdparm or similar is run on it. Finally looking at the /correct/ datasheet I think I found the reason. I am aware the quirk in this patch is a bit hacky, but the hardware manufacturers haven't made it easy for us. Signed-off-by: Tormod Volden <debian.tormod@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usbfs: Always allow ctrl requests with USB_RECIP_ENDPOINT on the ctrl epHans de Goede2013-05-071-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 1361bf4b9f9ef45e628a5b89e0fd9bedfdcb7104 upstream. When usbfs receives a ctrl-request from userspace it calls check_ctrlrecip, which for a request with USB_RECIP_ENDPOINT tries to map this to an interface to see if this interface is claimed, except for ctrl-requests with a type of USB_TYPE_VENDOR. When trying to use this device: http://www.akaipro.com/eiepro redirected to a Windows vm running on qemu on top of Linux. The windows driver makes a ctrl-req with USB_TYPE_CLASS and USB_RECIP_ENDPOINT with index 0, and the mapping of the endpoint (0) to the interface fails since ep 0 is the ctrl endpoint and thus never is part of an interface. This patch fixes this ctrl-req failing by skipping the checkintf call for USB_RECIP_ENDPOINT ctrl-reqs on the ctrl endpoint. Reported-by: Dave Stikkolorum <d.r.stikkolorum@hhs.nl> Tested-by: Dave Stikkolorum <d.r.stikkolorum@hhs.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: ftdi_sio: correct ST Micro Connect Lite PIDsAdrian Thomasset2013-05-072-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 9f06d15f8db6946e41f73196a122b84a37938878 upstream. The current ST Micro Connect Lite uses the FT4232H hi-speed quad USB UART FTDI chip. It is also possible to drive STM reference targets populated with an on-board JTAG debugger based on the FT2232H chip with the same STMicroelectronics tools. For this reason, the ST Micro Connect Lite PIDs should be ST_STMCLT_2232_PID: 0x3746 ST_STMCLT_4232_PID: 0x3747 Signed-off-by: Adrian Thomasset <adrian.thomasset@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: add ftdi_sio USB ID for GDM Boost V1.xStefani Seibold2013-05-072-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | commit 58f8b6c4fa5a13cb2ddb400e26e9e65766d71e38 upstream. This patch add a missing usb device id for the GDMBoost V1.x device The patch is against 3.9-rc5 Signed-off-by: Stefani Seibold <stefani@seibold.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb/misc/appledisplay: Add 24" LED Cinema displayBen Jencks2013-05-071-0/+1
| | | | | | | | | | | | | | | | | | | | commit e7d3b6e22c871ba36d052ca99bc8ceca4d546a60 upstream. Add the Apple 24" LED Cinema display to the supported devices. Signed-off-by: Ben Jencks <ben@bjencks.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: option: add a D-Link DWM-156 variantBjørn Mork2013-05-071-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit a2a2d6c7f93e160b52a4ad0164db1f43f743ae0f upstream. Adding support for a Mediatek based device labelled as D-Link Model: DWM-156, H/W Ver: A7 Also adding two other device IDs found in the Debian(!) packages included on the embedded device driver CD. This is a composite MBIM + serial ports + card reader device: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 14 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2001 ProdID=7d01 Rev= 3.00 S: Manufacturer=D-Link,Inc S: Product=D-Link DWM-156 C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=500us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: serial: option: Added support Olivetti Olicard 145Filippo Turato2013-05-071-0/+2
| | | | | | | | | | | | | | | | | | | | commit d19bf5cedfd7d53854a3bd699c98b467b139833b upstream. This adds PID for Olivetti Olicard 145 in option.c Signed-off-by: Filippo Turato <nnj7585@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge 3.0.75Pawit Pornkitprasan2013-04-299-34/+42
|\ \ | |/ | | | | Change-Id: Iefad0afd76773f4a9556775cd0fa8dcacb135cdf
| * usb: xhci: Fix TRB transfer length macro used for Event TRB.Vivek Gautam2013-04-052-12/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 1c11a172cb30492f5f6a82c6e118fdcd9946c34f upstream. Use proper macro while extracting TRB transfer length from Transfer event TRBs. Adding a macro EVENT_TRB_LEN (bits 0:23) for the same, and use it instead of TRB_LEN (bits 0:16) in case of event TRBs. This patch should be backported to kernels as old as 2.6.31, that contain the commit b10de142119a676552df3f0d2e3a9d647036c26a "USB: xhci: Bulk transfer support". This patch will have issues applying to older kernels. Signed-off-by: Vivek gautam <gautam.vivek@samsung.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: ftdi_sio: Add support for Mitsubishi FX-USB-AW/-BDKonstantin Holoborodko2013-04-052-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 482b0b5d82bd916cc0c55a2abf65bdc69023b843 upstream. It enhances the driver for FTDI-based USB serial adapters to recognize Mitsubishi Electric Corp. USB/RS422 Converters as FT232BM chips and support them. https://search.meau.com/?q=FX-USB-AW Signed-off-by: Konstantin Holoborodko <klh.kernel@gmail.com> Tested-by: Konstantin Holoborodko <klh.kernel@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: io_ti: fix get_icount for two port adaptersJohan Hovold2013-03-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 5492bf3d5655b4954164f69c02955a7fca267611 upstream. Add missing get_icount field to two-port driver. The two-port driver was not updated when switching to the new icount interface in commit 0bca1b913aff ("tty: Convert the USB drivers to the new icount interface"). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: garmin_gps: fix memory leak on disconnectJohan Hovold2013-03-281-6/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 618aa1068df29c37a58045fe940f9106664153fd upstream. Remove bogus disconnect test introduced by 95bef012e ("USB: more serial drivers writing after disconnect") which prevented queued data from being freed on disconnect. The possible IO it was supposed to prevent is long gone. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: serial: fix interface refcountingJohan Hovold2013-03-281-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit d7971051e4df825e0bc11b995e87bfe86355b8e5 upstream. Make sure the interface is not released before our serial device. Note that drivers are still not allowed to access the interface in any way that may interfere with another driver that may have gotten bound to the same interface after disconnect returns. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: xhci - fix bit definitions for IMAN registerDmitry Torokhov2013-03-281-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit f8264340e694604863255cc0276491d17c402390 upstream. According to XHCI specification (5.5.2.1) the IP is bit 0 and IE is bit 1 of IMAN register. Previously their definitions were reversed. Even though there are no ill effects being observed from the swapped definitions (because IMAN_IP is RW1C and in legacy PCI case we come in with it already set to 1 so it was clearing itself even though we were setting IMAN_IE instead of IMAN_IP), we should still correct the values. This patch should be backported to kernels as old as 2.6.36, that contain the commit 4e833c0b87a30798e67f06120cecebef6ee9644c "xhci: don't re-enable IE constantly". Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb-storage: add unusual_devs entry for Samsung YP-Z3 mp3 playerDmitry Artamonow2013-03-281-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | commit 29f86e66428ee083aec106cca1748dc63d98ce23 upstream. Device stucks on filesystem writes, unless following quirk is passed: echo 04e8:5136:m > /sys/module/usb_storage/parameters/quirks Add corresponding entry to unusual_devs.h Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * Revert "USB: EHCI: don't check DMA values in QH overlays"Greg Kroah-Hartman2013-03-281-13/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 0319f9909ce68a7516dfc8d53400e07168d281a8, which is commit feca7746d5d9e84b105a613b7f3b6ad00d327372 upstream. It shouldn't have gone into this stable release. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Joseph Salisbury <joseph.salisbury@canonical.com> Cc: Stephen Thirlwall <sdt@dr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge 3.0.70Pawit Pornkitprasan2013-03-218-86/+390
|\ \ | |/ | | | | Change-Id: I4316261b071ad622fcf62dcae7874c2ea6d9604d
| * USB: EHCI: don't check DMA values in QH overlaysAlan Stern2013-03-201-5/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit feca7746d5d9e84b105a613b7f3b6ad00d327372 upstream. This patch (as1661) fixes a rather obscure bug in ehci-hcd. In a couple of places, the driver compares the DMA address stored in a QH's overlay region with the address of a particular qTD, in order to see whether that qTD is the one currently being processed by the hardware. (If it is then the status in the QH's overlay region is more up-to-date than the status in the qTD, and if it isn't then the overlay's value needs to be adjusted when the QH is added back to the active schedule.) However, DMA address in the overlay region isn't always valid. It sometimes will contain a stale value, which may happen by coincidence to be equal to a qTD's DMA address. Instead of checking the DMA address, we should check whether the overlay region is active and valid. The patch tests the ACTIVE bit in the overlay, and clears this bit when the overlay becomes invalid (which happens when the currently-executing URB is unlinked). This is the second part of a fix for the regression reported at: https://bugs.launchpad.net/bugs/1088733 Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Joseph Salisbury <joseph.salisbury@canonical.com> Reported-and-tested-by: Stephen Thirlwall <sdt@dr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: storage: fix Huawei mode switching regressionBjørn Mork2013-03-203-78/+331
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit ab4b71644a26d1ab92b987b2fd30e17c25e89f85 upstream. This reverts commit 200e0d99 ("USB: storage: optimize to match the Huawei USB storage devices and support new switch command" and the followup bugfix commit cd060956 ("USB: storage: properly handle the endian issues of idProduct"). The commit effectively added a large number of Huawei devices to the deprecated usb-storage mode switching logic. Many of these devices have been in use and supported by the userspace usb_modeswitch utility for years. Forcing the switching inside the kernel causes a number of regressions as a result of ignoring existing onfigurations, and also completely takes away the ability to configure mode switching per device/system/user. Known regressions caused by this: - Some of the devices support multiple modes, using different switching commands. There are existing configurations taking advantage of this. - There is a real use case for disabling mode switching and instead mounting the exposed storage device. This becomes impossible with switching logic inside the usb-storage driver. - At least on device fail as a result of the usb-storage switching command, becoming completely unswitchable. This is possibly a firmware bug, but still a regression because the device work as expected using usb_modeswitch defaults. In-kernel mode switching was deprecated years ago with the development of the more user friendly userspace alternatives. The existing list of devices in usb-storage was only kept to prevent breaking already working systems. The long term plan is to remove the list, not to add to it. Ref: http://permalink.gmane.org/gmane.linux.usb.general/28543 Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: <fangxiaozhi@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: serial: Add Rigblaster Advantage to device tableSteve Conklin2013-03-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | commit a57e82a18779ab8a5e5a1f5841cef937cf578913 upstream. The Rigblaster Advantage is an amateur radio interface sold by West Mountain Radio. It contains a cp210x serial interface but the device ID is not in the driver. Signed-off-by: Steve Conklin <sconklin@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: added support for Cinterion's products AH6 and PLS8Christian Schmiedl2013-03-201-0/+4
| | | | | | | | | | | | | | | | | | | | | | commit 1941138e1c024ecb5bd797d414928d3eb94d8662 upstream. add support for Cinterion's products AH6 and PLS8 by adding Product IDs and USB_DEVICE tuples. Signed-off-by: Christian Schmiedl <christian.schmiedl@gemalto.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: cp210x new Vendor/Device IDsMatwey V. Kornilov2013-03-201-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit be3101c23394af59694c8a2aae6d07f5da62fea5 upstream. This patch adds support for the Lake Shore Cryotronics devices to the CP210x driver. These lines are ported from cp210x driver distributed by Lake Shore web site: http://www.lakeshore.com/Documents/Lake%20Shore%20cp210x-3.0.0.tar.gz and licensed under the terms of GPLv2. Moreover, I've tested this changes with Lake Shore 335 in my labs. Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: cdc-wdm: fix buffer overflowOliver Neukum2013-03-201-3/+20
| | | | | | | | | | | | | | | | | | | | | | | | commit c0f5ecee4e741667b2493c742b60b6218d40b3aa upstream. The buffer for responses must not overflow. If this would happen, set a flag, drop the data and return an error after user space has read all remaining data. Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: option: add Huawei E5331Bjørn Mork2013-03-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | commit daec90e7382cbd0e73eb6861109b3da91e5ab1f3 upstream. Another device using CDC ACM with vendor specific protocol to mark serial functions. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.1 at 2025-07-06 22:36:51 +0000