ACPICA: FADT parsing changes and fixes

1) Update the register lengths for the PM1 event blocks. The
length must be divided by two in order to use these to access
the status registers.
2) Add run-time option to use default register lengths to override a
faulty FADT.
3) Add warning message if any of the X64 address structures contain a length
that does not match the legacy length earlier in the FADT.
4) Move all FADT warning messages into the ValidateFadt function.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

3 files changed, 118 insertions, 21 deletions

diff --git a/drivers/acpi/tables/tbfadt.c b/drivers/acpi/tables/tbfadt.c
index 57e089f..b4ce207 100644
--- a/drivers/acpi/tables/tbfadt.c
+++ b/drivers/acpi/tables/tbfadt.c
@@ -51,7 +51,7 @@ ACPI_MODULE_NAME("tbfadt")
 /* Local prototypes */
 static inline void
 acpi_tb_init_generic_address(struct acpi_generic_address *generic_address,
-			     u8 byte_width, u64 address);
+			     u8 space_id, u8 byte_width, u64 address);
 
 static void acpi_tb_convert_fadt(void);
 
@@ -125,7 +125,7 @@ static struct acpi_fadt_info fadt_info_table[] = {
 
 static inline void
 acpi_tb_init_generic_address(struct acpi_generic_address *generic_address,
-			     u8 byte_width, u64 address)
+			     u8 space_id, u8 byte_width, u64 address)
 {
 
 	/*
@@ -136,10 +136,10 @@ acpi_tb_init_generic_address(struct acpi_generic_address *generic_address,
 
 	/* All other fields are byte-wide */
 
-	generic_address->space_id = ACPI_ADR_SPACE_SYSTEM_IO;
-	generic_address->bit_width = byte_width << 3;
+	generic_address->space_id = space_id;
+	generic_address->bit_width = (u8)ACPI_MUL_8(byte_width);
 	generic_address->bit_offset = 0;
-	generic_address->access_width = 0;
+	generic_address->access_width = 0;	/* Access width ANY */
 }
 
 /*******************************************************************************
@@ -226,7 +226,8 @@ void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length)
 	 */
 	if (length > sizeof(struct acpi_table_fadt)) {
 		ACPI_WARNING((AE_INFO,
-			      "FADT (revision %u) is longer than ACPI 2.0 version, truncating length 0x%X to 0x%zX",
+			      "FADT (revision %u) is longer than ACPI 2.0 version, "
+			      "truncating length 0x%X to 0x%zX",
 			      table->revision, (unsigned)length,
 			      sizeof(struct acpi_table_fadt)));
 	}
@@ -245,7 +246,6 @@ void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length)
 	 * 2) Validate some of the important values within the FADT
 	 */
 	acpi_tb_convert_fadt();
-	acpi_tb_validate_fadt();
 }
 
 /*******************************************************************************
@@ -337,7 +337,11 @@ static void acpi_tb_convert_fadt(void)
 		/* Expand only if the X target is null */
 
 		if (!target->address) {
+
+			/* The space_id is always I/O for the legacy address fields */
+
 			acpi_tb_init_generic_address(target,
+						     ACPI_ADR_SPACE_SYSTEM_IO,
 						     *ACPI_ADD_PTR(u8,
 								   &acpi_gbl_FADT,
 								   fadt_info_table
@@ -350,6 +354,25 @@ static void acpi_tb_convert_fadt(void)
 		}
 	}
 
+	/* Validate FADT values now, before we make any changes */
+
+	acpi_tb_validate_fadt();
+
+	/*
+	 * Get the length of the individual PM1 registers. Each register is
+	 * defined to be the event block length / 2.
+	 */
+	pm1_register_length = (u8)ACPI_DIV_2(acpi_gbl_FADT.pm1_event_length);
+
+	/*
+	 * Adjust the lengths of the PM1 Event Blocks so that they can be used to
+	 * access the PM1 status register(s).
+	 */
+	acpi_gbl_FADT.xpm1a_event_block.bit_width =
+	    (u8)ACPI_MUL_8(pm1_register_length);
+	acpi_gbl_FADT.xpm1b_event_block.bit_width =
+	    (u8)ACPI_MUL_8(pm1_register_length);
+
 	/*
 	 * Calculate separate GAS structs for the PM1 Enable registers.
 	 * These addresses do not appear (directly) in the FADT, so it is
@@ -370,11 +393,11 @@ static void acpi_tb_convert_fadt(void)
 		       " PM1_EVT_LEN (%u)\n",
 		       acpi_gbl_FADT.xpm1a_event_block.bit_width,
 		       acpi_gbl_FADT.pm1_event_length);
-	pm1_register_length = (u8) ACPI_DIV_2(acpi_gbl_FADT.pm1_event_length);
 
 	/* The PM1A register block is required */
 
 	acpi_tb_init_generic_address(&acpi_gbl_xpm1a_enable,
+				     acpi_gbl_FADT.xpm1a_event_block.space_id,
 				     pm1_register_length,
 				     (acpi_gbl_FADT.xpm1a_event_block.address +
 				      pm1_register_length));
@@ -393,6 +416,7 @@ static void acpi_tb_convert_fadt(void)
 			       acpi_gbl_FADT.xpm1b_event_block.bit_width,
 			       acpi_gbl_FADT.pm1_event_length);
 		acpi_tb_init_generic_address(&acpi_gbl_xpm1b_enable,
+					     acpi_gbl_FADT.xpm1b_event_block.space_id,
 					     pm1_register_length,
 					     (acpi_gbl_FADT.xpm1b_event_block.
 					      address + pm1_register_length));
@@ -401,6 +425,30 @@ static void acpi_tb_convert_fadt(void)
 		    acpi_gbl_FADT.xpm1b_event_block.space_id;
 
 	}
+
+	if (acpi_gbl_use_default_register_widths) {
+		/*
+		 * Optionally, use the default sizes for the ACPI registers.
+		 * Some FADTs do not have the correct length(s).
+		 *
+		 * Note: Xpm1a_event_block and Xpm1b_event_block are used to access the PM1
+		 * status registers. The PM1 enable registers are created above.
+		 */
+		acpi_gbl_xpm1a_enable.bit_width = ACPI_PM1_REGISTER_WIDTH;
+		acpi_gbl_xpm1b_enable.bit_width = ACPI_PM1_REGISTER_WIDTH;
+
+		acpi_gbl_FADT.xpm1a_event_block.bit_width =
+		    ACPI_PM1_REGISTER_WIDTH;
+		acpi_gbl_FADT.xpm1b_event_block.bit_width =
+		    ACPI_PM1_REGISTER_WIDTH;
+		acpi_gbl_FADT.xpm1a_control_block.bit_width =
+		    ACPI_PM1_REGISTER_WIDTH;
+		acpi_gbl_FADT.xpm1b_control_block.bit_width =
+		    ACPI_PM1_REGISTER_WIDTH;
+		acpi_gbl_FADT.xpm2_control_block.bit_width =
+		    ACPI_PM2_REGISTER_WIDTH;
+		acpi_gbl_FADT.xpm_timer_block.bit_width = ACPI_PM_TIMER_WIDTH;
+	}
 }
 
 /******************************************************************************
@@ -425,26 +473,63 @@ static void acpi_tb_convert_fadt(void)
 
 static void acpi_tb_validate_fadt(void)
 {
+	char *name;
 	u32 *address32;
 	struct acpi_generic_address *address64;
 	u8 length;
 	u32 i;
 
-	/* Examine all of the 64-bit extended address fields (X fields) */
+	/*
+	 * Check for FACS and DSDT address mismatches. An address mismatch between
+	 * the 32-bit and 64-bit address fields (FIRMWARE_CTRL/X_FIRMWARE_CTRL and
+	 * DSDT/X_DSDT) would indicate the presence of two FACS or two DSDT tables.
+	 */
+	if (acpi_gbl_FADT.facs &&
+	    (acpi_gbl_FADT.Xfacs != (u64) acpi_gbl_FADT.facs)) {
+		ACPI_WARNING((AE_INFO,
+			      "32/64 FACS address mismatch in FADT - "
+			      "two FACS tables! %8.8X/%8.8X%8.8X",
+			      acpi_gbl_FADT.facs,
+			      ACPI_FORMAT_UINT64(acpi_gbl_FADT.Xfacs)));
+	}
 
-	for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) {
+	if (acpi_gbl_FADT.dsdt &&
+	    (acpi_gbl_FADT.Xdsdt != (u64) acpi_gbl_FADT.dsdt)) {
+		ACPI_WARNING((AE_INFO,
+			      "32/64 DSDT address mismatch in FADT - "
+			      "two DSDT tables! %8.8X/%8.8X%8.8X",
+			      acpi_gbl_FADT.dsdt,
+			      ACPI_FORMAT_UINT64(acpi_gbl_FADT.Xdsdt)));
+	}
 
-		/* Generate pointers to the 32-bit and 64-bit addresses and get the length */
+	/* Examine all of the 64-bit extended address fields (X fields) */
 
-		address64 =
-		    ACPI_ADD_PTR(struct acpi_generic_address, &acpi_gbl_FADT,
-				 fadt_info_table[i].target);
+	for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) {
+		/*
+		 * Generate pointers to the 32-bit and 64-bit addresses, get the
+		 * register length (width), and the register name
+		 */
+		address64 = ACPI_ADD_PTR(struct acpi_generic_address,
+					 &acpi_gbl_FADT,
+					 fadt_info_table[i].target);
 		address32 =
 		    ACPI_ADD_PTR(u32, &acpi_gbl_FADT,
 				 fadt_info_table[i].source);
 		length =
 		    *ACPI_ADD_PTR(u8, &acpi_gbl_FADT,
 				  fadt_info_table[i].length);
+		name = fadt_info_table[i].name;
+
+		/*
+		 * For each extended field, check for length mismatch between the
+		 * legacy length field and the corresonding 64-bit X length field.
+		 */
+		if (address64 && (address64->bit_width != ACPI_MUL_8(length))) {
+			ACPI_WARNING((AE_INFO,
+				      "32/64X bit length mismatch in %s: %d/%d",
+				      name, ACPI_MUL_8(length),
+				      address64->bit_width));
+		}
 
 		if (fadt_info_table[i].type & ACPI_FADT_REQUIRED) {
 			/*
@@ -453,8 +538,8 @@ static void acpi_tb_validate_fadt(void)
 			 */
 			if (!address64->address || !length) {
 				ACPI_ERROR((AE_INFO,
-					    "Required field \"%s\" has zero address and/or length: %8.8X%8.8X/%X",
-					    fadt_info_table[i].name,
+					    "Required field %s has zero address and/or length: %8.8X%8.8X/%X",
+					    name,
 					    ACPI_FORMAT_UINT64(address64->
 							       address),
 					    length));
@@ -467,8 +552,8 @@ static void acpi_tb_validate_fadt(void)
 			if ((address64->address && !length)
 			    || (!address64->address && length)) {
 				ACPI_WARNING((AE_INFO,
-					      "Optional field \"%s\" has zero address or length: %8.8X%8.8X/%X",
-					      fadt_info_table[i].name,
+					      "Optional field %s has zero address or length: %8.8X%8.8X/%X",
+					      name,
 					      ACPI_FORMAT_UINT64(address64->
 								 address),
 					      length));
@@ -480,8 +565,8 @@ static void acpi_tb_validate_fadt(void)
 		if (address64->address && *address32 &&
 		    (address64->address != (u64) * address32)) {
 			ACPI_ERROR((AE_INFO,
-				    "32/64X address mismatch in \"%s\": [%8.8X] [%8.8X%8.8X], using 64X",
-				    fadt_info_table[i].name, *address32,
+				    "32/64X address mismatch in %s: [%8.8X] [%8.8X%8.8X], using 64X",
+				    name, *address32,
 				    ACPI_FORMAT_UINT64(address64->address)));
 		}
 	}
diff --git a/include/acpi/acglobal.h b/include/acpi/acglobal.h
index 78f3c14..55eb5d6 100644
--- a/include/acpi/acglobal.h
+++ b/include/acpi/acglobal.h
@@ -102,6 +102,12 @@ ACPI_EXTERN u8 ACPI_INIT_GLOBAL(acpi_gbl_create_osi_method, TRUE);
  */
 ACPI_EXTERN u8 ACPI_INIT_GLOBAL(acpi_gbl_leave_wake_gpes_disabled, TRUE);
 
+/*
+ * Optionally use default values for the ACPI register widths. Set this to
+ * TRUE to use the defaults, if an FADT contains incorrect widths/lengths.
+ */
+ACPI_EXTERN u8 ACPI_INIT_GLOBAL(acpi_gbl_use_default_register_widths, FALSE);
+
 /*****************************************************************************
  *
  * Debug support
diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
index 24b2cef..03744d2 100644
--- a/include/acpi/actypes.h
+++ b/include/acpi/actypes.h
@@ -309,10 +309,16 @@ typedef u32 acpi_physical_address;
  *
  *****************************************************************************/
 
-/* Number of distinct GPE register blocks and register width */
+/* Number of distinct FADT-based GPE register blocks (GPE0 and GPE1) */
 
 #define ACPI_MAX_GPE_BLOCKS             2
+
+/* Default ACPI register widths */
+
 #define ACPI_GPE_REGISTER_WIDTH         8
+#define ACPI_PM1_REGISTER_WIDTH         16
+#define ACPI_PM2_REGISTER_WIDTH         8
+#define ACPI_PM_TIMER_WIDTH             32
 
 /* Names within the namespace are 4 bytes long */