Drop the CRISv32 version of pcf8563

No longer used.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>

3 files changed, 1 insertions, 380 deletions

diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index 0a7a4c1..7677416 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -296,8 +296,7 @@ config ETRAX_RTC
 choice
 	prompt "RTC chip"
 	depends on ETRAX_RTC
-	default ETRAX_PCF8563 if ETRAX_ARCH_V32
-	default ETRAX_DS1302 if ETRAX_ARCH_V10
+	default ETRAX_DS1302
 
 config ETRAX_DS1302
 	depends on ETRAX_ARCH_V10
diff --git a/arch/cris/arch-v32/drivers/Makefile b/arch/cris/arch-v32/drivers/Makefile
index e8c0243..39aa3c1 100644
--- a/arch/cris/arch-v32/drivers/Makefile
+++ b/arch/cris/arch-v32/drivers/Makefile
@@ -7,7 +7,6 @@ obj-$(CONFIG_ETRAX_AXISFLASHMAP)        += axisflashmap.o
 obj-$(CONFIG_ETRAXFS)                   += mach-fs/
 obj-$(CONFIG_CRIS_MACH_ARTPEC3)         += mach-a3/
 obj-$(CONFIG_ETRAX_IOP_FW_LOAD)         += iop_fw_load.o
-obj-$(CONFIG_ETRAX_PCF8563)		+= pcf8563.o
 obj-$(CONFIG_ETRAX_I2C)			+= i2c.o
 obj-$(CONFIG_ETRAX_SYNCHRONOUS_SERIAL)	+= sync_serial.o
 obj-$(CONFIG_PCI)			+= pci/
diff --git a/arch/cris/arch-v32/drivers/pcf8563.c b/arch/cris/arch-v32/drivers/pcf8563.c
deleted file mode 100644
index b6e4fc0..0000000
--- a/arch/cris/arch-v32/drivers/pcf8563.c
+++ /dev/null
@@ -1,377 +0,0 @@
-/*
- * PCF8563 RTC
- *
- * From Phillips' datasheet:
- *
- * The PCF8563 is a CMOS real-time clock/calendar optimized for low power
- * consumption. A programmable clock output, interrupt output and voltage
- * low detector are also provided. All address and data are transferred
- * serially via two-line bidirectional I2C-bus. Maximum bus speed is
- * 400 kbits/s. The built-in word address register is incremented
- * automatically after each written or read byte.
- *
- * Copyright (c) 2002-2007, Axis Communications AB
- * All rights reserved.
- *
- * Author: Tobias Anderberg <tobiasa@axis.com>.
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/ioctl.h>
-#include <linux/delay.h>
-#include <linux/bcd.h>
-#include <linux/mutex.h>
-
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/rtc.h>
-
-#include "i2c.h"
-
-#define PCF8563_MAJOR	121	/* Local major number. */
-#define DEVICE_NAME	"rtc"	/* Name which is registered in /proc/devices. */
-#define PCF8563_NAME	"PCF8563"
-#define DRIVER_VERSION	"$Revision: 1.17 $"
-
-/* Two simple wrapper macros, saves a few keystrokes. */
-#define rtc_read(x) i2c_readreg(RTC_I2C_READ, x)
-#define rtc_write(x,y) i2c_writereg(RTC_I2C_WRITE, x, y)
-
-static DEFINE_MUTEX(pcf8563_mutex);
-static DEFINE_MUTEX(rtc_lock); /* Protect state etc */
-
-static const unsigned char days_in_month[] =
-	{ 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
-
-static long pcf8563_unlocked_ioctl(struct file *filp, unsigned int cmd, unsigned long arg);
-
-/* Cache VL bit value read at driver init since writing the RTC_SECOND
- * register clears the VL status.
- */
-static int voltage_low;
-
-static const struct file_operations pcf8563_fops = {
-	.owner		= THIS_MODULE,
-	.unlocked_ioctl = pcf8563_unlocked_ioctl,
-	.llseek		= noop_llseek,
-};
-
-unsigned char
-pcf8563_readreg(int reg)
-{
-	unsigned char res = rtc_read(reg);
-
-	/* The PCF8563 does not return 0 for unimplemented bits. */
-	switch (reg) {
-		case RTC_SECONDS:
-		case RTC_MINUTES:
-			res &= 0x7F;
-			break;
-		case RTC_HOURS:
-		case RTC_DAY_OF_MONTH:
-			res &= 0x3F;
-			break;
-		case RTC_WEEKDAY:
-			res &= 0x07;
-			break;
-		case RTC_MONTH:
-			res &= 0x1F;
-			break;
-		case RTC_CONTROL1:
-			res &= 0xA8;
-			break;
-		case RTC_CONTROL2:
-			res &= 0x1F;
-			break;
-		case RTC_CLOCKOUT_FREQ:
-		case RTC_TIMER_CONTROL:
-			res &= 0x83;
-			break;
-	}
-	return res;
-}
-
-void
-pcf8563_writereg(int reg, unsigned char val)
-{
-	rtc_write(reg, val);
-}
-
-void
-get_rtc_time(struct rtc_time *tm)
-{
-	tm->tm_sec  = rtc_read(RTC_SECONDS);
-	tm->tm_min  = rtc_read(RTC_MINUTES);
-	tm->tm_hour = rtc_read(RTC_HOURS);
-	tm->tm_mday = rtc_read(RTC_DAY_OF_MONTH);
-	tm->tm_wday = rtc_read(RTC_WEEKDAY);
-	tm->tm_mon  = rtc_read(RTC_MONTH);
-	tm->tm_year = rtc_read(RTC_YEAR);
-
-	if (tm->tm_sec & 0x80) {
-		printk(KERN_ERR "%s: RTC Voltage Low - reliable date/time "
-		       "information is no longer guaranteed!\n", PCF8563_NAME);
-	}
-
-	tm->tm_year  = bcd2bin(tm->tm_year) +
-		       ((tm->tm_mon & 0x80) ? 100 : 0);
-	tm->tm_sec  &= 0x7F;
-	tm->tm_min  &= 0x7F;
-	tm->tm_hour &= 0x3F;
-	tm->tm_mday &= 0x3F;
-	tm->tm_wday &= 0x07; /* Not coded in BCD. */
-	tm->tm_mon  &= 0x1F;
-
-	tm->tm_sec = bcd2bin(tm->tm_sec);
-	tm->tm_min = bcd2bin(tm->tm_min);
-	tm->tm_hour = bcd2bin(tm->tm_hour);
-	tm->tm_mday = bcd2bin(tm->tm_mday);
-	tm->tm_mon = bcd2bin(tm->tm_mon);
-	tm->tm_mon--; /* Month is 1..12 in RTC but 0..11 in linux */
-}
-
-int __init
-pcf8563_init(void)
-{
-	static int res;
-	static int first = 1;
-
-	if (!first)
-		return res;
-	first = 0;
-
-	/* Initiate the i2c protocol. */
-	res = i2c_init();
-	if (res < 0) {
-		printk(KERN_CRIT "pcf8563_init: Failed to init i2c.\n");
-		return res;
-	}
-
-	/*
-	 * First of all we need to reset the chip. This is done by
-	 * clearing control1, control2 and clk freq and resetting
-	 * all alarms.
-	 */
-	if (rtc_write(RTC_CONTROL1, 0x00) < 0)
-		goto err;
-
-	if (rtc_write(RTC_CONTROL2, 0x00) < 0)
-		goto err;
-
-	if (rtc_write(RTC_CLOCKOUT_FREQ, 0x00) < 0)
-		goto err;
-
-	if (rtc_write(RTC_TIMER_CONTROL, 0x03) < 0)
-		goto err;
-
-	/* Reset the alarms. */
-	if (rtc_write(RTC_MINUTE_ALARM, 0x80) < 0)
-		goto err;
-
-	if (rtc_write(RTC_HOUR_ALARM, 0x80) < 0)
-		goto err;
-
-	if (rtc_write(RTC_DAY_ALARM, 0x80) < 0)
-		goto err;
-
-	if (rtc_write(RTC_WEEKDAY_ALARM, 0x80) < 0)
-		goto err;
-
-	/* Check for low voltage, and warn about it. */
-	if (rtc_read(RTC_SECONDS) & 0x80) {
-		voltage_low = 1;
-		printk(KERN_WARNING "%s: RTC Voltage Low - reliable "
-		       "date/time information is no longer guaranteed!\n",
-		       PCF8563_NAME);
-	}
-
-	return res;
-
-err:
-	printk(KERN_INFO "%s: Error initializing chip.\n", PCF8563_NAME);
-	res = -1;
-	return res;
-}
-
-void __exit
-pcf8563_exit(void)
-{
-	unregister_chrdev(PCF8563_MAJOR, DEVICE_NAME);
-}
-
-/*
- * ioctl calls for this driver. Why return -ENOTTY upon error? Because
- * POSIX says so!
- */
-static int pcf8563_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
-{
-	/* Some sanity checks. */
-	if (_IOC_TYPE(cmd) != RTC_MAGIC)
-		return -ENOTTY;
-
-	if (_IOC_NR(cmd) > RTC_MAX_IOCTL)
-		return -ENOTTY;
-
-	switch (cmd) {
-	case RTC_RD_TIME:
-	{
-		struct rtc_time tm;
-
-		mutex_lock(&rtc_lock);
-		memset(&tm, 0, sizeof tm);
-		get_rtc_time(&tm);
-
-		if (copy_to_user((struct rtc_time *) arg, &tm,
-				 sizeof tm)) {
-			mutex_unlock(&rtc_lock);
-			return -EFAULT;
-		}
-
-		mutex_unlock(&rtc_lock);
-
-		return 0;
-	}
-	case RTC_SET_TIME:
-	{
-		int leap;
-		int year;
-		int century;
-		struct rtc_time tm;
-
-		memset(&tm, 0, sizeof tm);
-		if (!capable(CAP_SYS_TIME))
-			return -EPERM;
-
-		if (copy_from_user(&tm, (struct rtc_time *) arg,
-				   sizeof tm))
-			return -EFAULT;
-
-		/* Convert from struct tm to struct rtc_time. */
-		tm.tm_year += 1900;
-		tm.tm_mon += 1;
-
-		/*
-		 * Check if tm.tm_year is a leap year. A year is a leap
-		 * year if it is divisible by 4 but not 100, except
-		 * that years divisible by 400 _are_ leap years.
-		 */
-		year = tm.tm_year;
-		leap = (tm.tm_mon == 2) &&
-			((year % 4 == 0 && year % 100 != 0) || year % 400 == 0);
-
-		/* Perform some sanity checks. */
-		if ((tm.tm_year < 1970) ||
-		    (tm.tm_mon > 12) ||
-		    (tm.tm_mday == 0) ||
-		    (tm.tm_mday > days_in_month[tm.tm_mon] + leap) ||
-		    (tm.tm_wday >= 7) ||
-		    (tm.tm_hour >= 24) ||
-		    (tm.tm_min >= 60) ||
-		    (tm.tm_sec >= 60))
-			return -EINVAL;
-
-		century = (tm.tm_year >= 2000) ? 0x80 : 0;
-		tm.tm_year = tm.tm_year % 100;
-
-		tm.tm_year = bin2bcd(tm.tm_year);
-		tm.tm_mon = bin2bcd(tm.tm_mon);
-		tm.tm_mday = bin2bcd(tm.tm_mday);
-		tm.tm_hour = bin2bcd(tm.tm_hour);
-		tm.tm_min = bin2bcd(tm.tm_min);
-		tm.tm_sec = bin2bcd(tm.tm_sec);
-		tm.tm_mon |= century;
-
-		mutex_lock(&rtc_lock);
-
-		rtc_write(RTC_YEAR, tm.tm_year);
-		rtc_write(RTC_MONTH, tm.tm_mon);
-		rtc_write(RTC_WEEKDAY, tm.tm_wday); /* Not coded in BCD. */
-		rtc_write(RTC_DAY_OF_MONTH, tm.tm_mday);
-		rtc_write(RTC_HOURS, tm.tm_hour);
-		rtc_write(RTC_MINUTES, tm.tm_min);
-		rtc_write(RTC_SECONDS, tm.tm_sec);
-
-		mutex_unlock(&rtc_lock);
-
-		return 0;
-	}
-	case RTC_VL_READ:
-		if (voltage_low)
-			printk(KERN_ERR "%s: RTC Voltage Low - "
-			       "reliable date/time information is no "
-			       "longer guaranteed!\n", PCF8563_NAME);
-
-		if (copy_to_user((int *) arg, &voltage_low, sizeof(int)))
-			return -EFAULT;
-		return 0;
-
-	case RTC_VL_CLR:
-	{
-		/* Clear the VL bit in the seconds register in case
-		 * the time has not been set already (which would
-		 * have cleared it). This does not really matter
-		 * because of the cached voltage_low value but do it
-		 * anyway for consistency. */
-
-		int ret = rtc_read(RTC_SECONDS);
-
-		rtc_write(RTC_SECONDS, (ret & 0x7F));
-
-		/* Clear the cached value. */
-		voltage_low = 0;
-
-		return 0;
-	}
-	default:
-		return -ENOTTY;
-	}
-
-	return 0;
-}
-
-static long pcf8563_unlocked_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
-{
-	int ret;
-
-	mutex_lock(&pcf8563_mutex);
-	return pcf8563_ioctl(filp, cmd, arg);
-	mutex_unlock(&pcf8563_mutex);
-
-	return ret;
-}
-
-static int __init pcf8563_register(void)
-{
-	if (pcf8563_init() < 0) {
-		printk(KERN_INFO "%s: Unable to initialize Real-Time Clock "
-		       "Driver, %s\n", PCF8563_NAME, DRIVER_VERSION);
-		return -1;
-	}
-
-	if (register_chrdev(PCF8563_MAJOR, DEVICE_NAME, &pcf8563_fops) < 0) {
-		printk(KERN_INFO "%s: Unable to get major numer %d for RTC "
-		       "device.\n", PCF8563_NAME, PCF8563_MAJOR);
-		return -1;
-	}
-
-	printk(KERN_INFO "%s Real-Time Clock Driver, %s\n", PCF8563_NAME,
-	       DRIVER_VERSION);
-
-	/* Check for low voltage, and warn about it. */
-	if (voltage_low) {
-		printk(KERN_WARNING "%s: RTC Voltage Low - reliable date/time "
-		       "information is no longer guaranteed!\n", PCF8563_NAME);
-	}
-
-	return 0;
-}
-
-module_init(pcf8563_register);
-module_exit(pcf8563_exit);