aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/input
diff options
context:
space:
mode:
authorDominic Cerquetti <binary1230@yahoo.com>2006-10-10 14:42:48 -0700
committerGreg Kroah-Hartman <gregkh@suse.de>2006-10-17 14:46:33 -0700
commitdeb8ee43a23d48116cb23eb8dd1de2348efb1e80 (patch)
treec30cede8edd09cc7aff7c01ea6fbcb7b0d900e5d /Documentation/input
parent4550718f6c75c9abe8b987fa4c625fd041aa95a2 (diff)
downloadkernel_samsung_crespo-deb8ee43a23d48116cb23eb8dd1de2348efb1e80.zip
kernel_samsung_crespo-deb8ee43a23d48116cb23eb8dd1de2348efb1e80.tar.gz
kernel_samsung_crespo-deb8ee43a23d48116cb23eb8dd1de2348efb1e80.tar.bz2
USB: xpad: dance pad support
Adds support for dance pads to the xpad driver. Dance pads require the d-pad to be mapped to four buttons instead of two axes, so that combinations of up/down and left/right can be hit simultaneously. Known dance pads are detected, and there is a module parameter added to default unknown xpad devices to map the d-pad to buttons if this is desired. (dpad_to_buttons). Minor modifications were made to port the changes in the original patch to a newer kernel version. This patch was originally from Dominic Cerquetti originally written for kernel 2.6.11.4, with minor modifications (API changes for USB, spelling fixes to the documentation added in the original patch) made to apply to the current kernel. I have modified Dominic's original patch per some suggestions from Dmitry Torokhov. (There was nothing in the patch format description about multiple From: lines, so I haven't added myself.) [akpm@osdl.org: cleanups] Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'Documentation/input')
-rw-r--r--Documentation/input/xpad.txt115
1 files changed, 91 insertions, 24 deletions
diff --git a/Documentation/input/xpad.txt b/Documentation/input/xpad.txt
index b9111a7..5427bdf 100644
--- a/Documentation/input/xpad.txt
+++ b/Documentation/input/xpad.txt
@@ -3,20 +3,37 @@ xpad - Linux USB driver for X-Box gamepads
This is the very first release of a driver for X-Box gamepads.
Basically, this was hacked away in just a few hours, so don't expect
miracles.
+
In particular, there is currently NO support for the rumble pack.
You won't find many ff-aware linux applications anyway.
-0. Status
----------
+0. Notes
+--------
+
+Driver updated for kernel 2.6.17.11. (Based on a patch for 2.6.11.4.)
-For now, this driver has only been tested on just one Linux-Box.
-This one is running a 2.4.18 kernel with usb-uhci on an amd athlon 600.
+The number of buttons/axes reported varies based on 3 things:
+- if you are using a known controller
+- if you are using a known dance pad
+- if using an unknown device (one not listed below), what you set in the
+ module configuration for "Map D-PAD to buttons rather than axes for unknown
+ pads" (module option dpad_to_buttons)
-The jstest-program from joystick-1.2.15 (jstest-version 2.1.0) reports
-8 axes and 10 buttons.
+If you set dpad_to_buttons to 0 and you are using an unknown device (one
+not listed below), the driver will map the directional pad to axes (X/Y),
+if you said N it will map the d-pad to buttons, which is needed for dance
+style games to function correctly. The default is Y.
+
+dpad_to_buttons has no effect for known pads.
+
+0.1 Normal Controllers
+----------------------
+With a normal controller, the directional pad is mapped to its own X/Y axes.
+The jstest-program from joystick-1.2.15 (jstest-version 2.1.0) will report 8
+axes and 10 buttons.
-Alls 8 axes work, though they all have the same range (-32768..32767)
+All 8 axes work, though they all have the same range (-32768..32767)
and the zero-setting is not correct for the triggers (I don't know if that
is some limitation of jstest, since the input device setup should be fine. I
didn't have a look at jstest itself yet).
@@ -30,16 +47,50 @@ in game functionality were OK. However, I find it rather difficult to
play first person shooters with a pad. Your mileage may vary.
+0.2 Xbox Dance Pads
+-------------------
+When using a known dance pad, jstest will report 6 axes and 14 buttons.
+
+For dance style pads (like the redoctane pad) several changes
+have been made. The old driver would map the d-pad to axes, resulting
+in the driver being unable to report when the user was pressing both
+left+right or up+down, making DDR style games unplayable.
+
+Known dance pads automatically map the d-pad to buttons and will work
+correctly out of the box.
+
+If your dance pad is recognized by the driver but is using axes instead
+of buttons, see section 0.3 - Unknown Controllers
+
+I've tested this with Stepmania, and it works quite well.
+
+
+0.3 Unkown Controllers
+----------------------
+If you have an unkown xbox controller, it should work just fine with
+the default settings.
+
+HOWEVER if you have an unknown dance pad not listed below, it will not
+work UNLESS you set "dpad_to_buttons" to 1 in the module configuration.
+
+PLEASE if you have an unkown controller, email Dom <binary1230@yahoo.com> with
+a dump from /proc/bus/usb and a description of the pad (manufacturer, country,
+whether it is a dance pad or normal controller) so that we can add your pad
+to the list of supported devices, ensuring that it will work out of the
+box in the future.
+
+
1. USB adapter
--------------
Before you can actually use the driver, you need to get yourself an
-adapter cable to connect the X-Box controller to your Linux-Box.
+adapter cable to connect the X-Box controller to your Linux-Box. You
+can buy these online fairly cheap, or build your own.
-Such a cable is pretty easy to build. The Controller itself is a USB compound
-device (a hub with three ports for two expansion slots and the controller
-device) with the only difference in a nonstandard connector (5 pins vs. 4 on
-standard USB connector).
+Such a cable is pretty easy to build. The Controller itself is a USB
+compound device (a hub with three ports for two expansion slots and
+the controller device) with the only difference in a nonstandard connector
+(5 pins vs. 4 on standard USB connector).
You just need to solder a USB connector onto the cable and keep the
yellow wire unconnected. The other pins have the same order on both
@@ -51,36 +102,36 @@ original one. You can buy an extension cable and cut that instead. That way,
you can still use the controller with your X-Box, if you have one ;)
-2. driver installation
+2. Driver Installation
----------------------
Once you have the adapter cable and the controller is connected, you need
to load your USB subsystem and should cat /proc/bus/usb/devices.
There should be an entry like the one at the end [4].
-Currently (as of version 0.0.4), the following three devices are included:
+Currently (as of version 0.0.6), the following devices are included:
original Microsoft XBOX controller (US), vendor=0x045e, product=0x0202
+ smaller Microsoft XBOX controller (US), vendor=0x045e, product=0x0289
original Microsoft XBOX controller (Japan), vendor=0x045e, product=0x0285
InterAct PowerPad Pro (Germany), vendor=0x05fd, product=0x107a
+ RedOctane Xbox Dance Pad (US), vendor=0x0c12, product=0x8809
-If you have another controller that is not listed above and is not recognized
-by the driver, please drop me a line with the appropriate info (that is, include
-the name, vendor and product ID, as well as the country where you bought it;
-sending the whole dump out of /proc/bus/usb/devices along would be even better).
+The driver should work with xbox pads not listed above as well, however
+you will need to do something extra for dance pads to work.
-In theory, the driver should work with other controllers than mine
-(InterAct PowerPad pro, bought in Germany) just fine, but I cannot test this
-for I only have this one controller.
+If you have a controller not listed above, see 0.3 - Unknown Controllers
If you compiled and installed the driver, test the functionality:
> modprobe xpad
> modprobe joydev
> jstest /dev/js0
-There should be a single line showing 18 inputs (8 axes, 10 buttons), and
-it's values should change if you move the sticks and push the buttons.
+If you're using a normal controller, there should be a single line showing
+18 inputs (8 axes, 10 buttons), and its values should change if you move
+the sticks and push the buttons. If you're using a dance pad, it should
+show 20 inputs (6 axes, 14 buttons).
-It works? Voila, your done ;)
+It works? Voila, you're done ;)
3. Thanks
@@ -111,6 +162,22 @@ I: If#= 0 Alt= 0 #EPs= 2 Cls=58(unk. ) Sub=42 Prot=00 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 32 Ivl= 10ms
E: Ad=02(O) Atr=03(Int.) MxPS= 32 Ivl= 10ms
+5. /proc/bus/usb/devices - dump from Redoctane Xbox Dance Pad (US):
+
+T: Bus=01 Lev=02 Prnt=09 Port=00 Cnt=01 Dev#= 10 Spd=12 MxCh= 0
+D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
+P: Vendor=0c12 ProdID=8809 Rev= 0.01
+S: Product=XBOX DDR
+C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
+I: If#= 0 Alt= 0 #EPs= 2 Cls=58(unk. ) Sub=42 Prot=00 Driver=xpad
+E: Ad=82(I) Atr=03(Int.) MxPS= 32 Ivl=4ms
+E: Ad=02(O) Atr=03(Int.) MxPS= 32 Ivl=4ms
+
--
Marko Friedemann <mfr@bmx-chemnitz.de>
2002-07-16
+ - original doc
+
+Dominic Cerquetti <binary1230@yahoo.com>
+2005-03-19
+ - added stuff for dance pads, new d-pad->axes mappings