[PATCH] ARM SMP: Fix vector entry

The current vector entry system does not allow for SMP.  In
order to work around this, we need to eliminate our reliance
on the fixed save areas, which breaks the way we enable
alignment traps.  This patch changes the way we handle the
save areas such that we can have one per CPU.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>

2 files changed, 139 insertions, 85 deletions

diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index cfb5cf5..78cf84c 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -53,46 +53,62 @@
 /*
  * Invalid mode handlers
  */
-	.macro	inv_entry, sym, reason
-	sub	sp, sp, #S_FRAME_SIZE		@ Allocate frame size in one go
-	stmia	sp, {r0 - lr}			@ Save XXX r0 - lr
-	ldr	r4, .LC\sym
+	.macro	inv_entry, reason
+	sub	sp, sp, #S_FRAME_SIZE
+	stmib	sp, {r1 - lr}
 	mov	r1, #\reason
 	.endm
 
 __pabt_invalid:
-	inv_entry abt, BAD_PREFETCH
-	b	1f
+	inv_entry BAD_PREFETCH
+	b	common_invalid
 
 __dabt_invalid:
-	inv_entry abt, BAD_DATA
-	b	1f
+	inv_entry BAD_DATA
+	b	common_invalid
 
 __irq_invalid:
-	inv_entry irq, BAD_IRQ
-	b	1f
+	inv_entry BAD_IRQ
+	b	common_invalid
 
 __und_invalid:
-	inv_entry und, BAD_UNDEFINSTR
+	inv_entry BAD_UNDEFINSTR
+
+	@
+	@ XXX fall through to common_invalid
+	@
+
+@
+@ common_invalid - generic code for failed exception (re-entrant version of handlers)
+@
+common_invalid:
+	zero_fp
+
+	ldmia	r0, {r4 - r6}
+	add	r0, sp, #S_PC		@ here for interlock avoidance
+	mov	r7, #-1			@  ""   ""    ""        ""
+	str	r4, [sp]		@ save preserved r0
+	stmia	r0, {r5 - r7}		@ lr_<exception>,
+					@ cpsr_<exception>, "old_r0"
 
-1:	zero_fp
-	ldmia	r4, {r5 - r7}			@ Get XXX pc, cpsr, old_r0
-	add	r4, sp, #S_PC
-	stmia	r4, {r5 - r7}			@ Save XXX pc, cpsr, old_r0
 	mov	r0, sp
-	and	r2, r6, #31			@ int mode
+	and	r2, r6, #0x1f
 	b	bad_mode
 
 /*
  * SVC mode handlers
  */
-	.macro	svc_entry, sym
+	.macro	svc_entry
 	sub	sp, sp, #S_FRAME_SIZE
-	stmia	sp, {r0 - r12}			@ save r0 - r12
-	ldr	r2, .LC\sym
-	add	r0, sp, #S_FRAME_SIZE
-	ldmia	r2, {r2 - r4}			@ get pc, cpsr
-	add	r5, sp, #S_SP
+	stmib	sp, {r1 - r12}
+
+	ldmia	r0, {r1 - r3}
+	add	r5, sp, #S_SP		@ here for interlock avoidance
+	mov	r4, #-1			@  ""  ""      ""       ""
+	add	r0, sp, #S_FRAME_SIZE   @  ""  ""      ""       ""
+	str	r1, [sp]		@ save the "real" r0 copied
+					@ from the exception stack
+
 	mov	r1, lr
 
 	@
@@ -109,7 +125,7 @@ __und_invalid:
 
 	.align	5
 __dabt_svc:
-	svc_entry abt
+	svc_entry
 
 	@
 	@ get ready to re-enable interrupts if appropriate
@@ -156,13 +172,15 @@ __dabt_svc:
 
 	.align	5
 __irq_svc:
-	svc_entry irq
+	svc_entry
+
 #ifdef CONFIG_PREEMPT
 	get_thread_info tsk
 	ldr	r8, [tsk, #TI_PREEMPT]		@ get preempt count
 	add	r7, r8, #1			@ increment it
 	str	r7, [tsk, #TI_PREEMPT]
 #endif
+
 	irq_handler
 #ifdef CONFIG_PREEMPT
 	ldr	r0, [tsk, #TI_FLAGS]		@ get flags
@@ -200,7 +218,7 @@ svc_preempt:
 
 	.align	5
 __und_svc:
-	svc_entry und
+	svc_entry
 
 	@
 	@ call emulation code, which returns using r9 if it has emulated
@@ -230,7 +248,7 @@ __und_svc:
 
 	.align	5
 __pabt_svc:
-	svc_entry abt
+	svc_entry
 
 	@
 	@ re-enable interrupts if appropriate
@@ -263,12 +281,6 @@ __pabt_svc:
 	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
 
 	.align	5
-.LCirq:
-	.word	__temp_irq
-.LCund:
-	.word	__temp_und
-.LCabt:
-	.word	__temp_abt
 .LCcralign:
 	.word	cr_alignment
 #ifdef MULTI_ABORT
@@ -285,12 +297,16 @@ __pabt_svc:
 /*
  * User mode handlers
  */
-	.macro	usr_entry, sym
-	sub	sp, sp, #S_FRAME_SIZE		@ Allocate frame size in one go
-	stmia	sp, {r0 - r12}			@ save r0 - r12
-	ldr	r7, .LC\sym
-	add	r5, sp, #S_PC
-	ldmia	r7, {r2 - r4}			@ Get USR pc, cpsr
+	.macro	usr_entry
+	sub	sp, sp, #S_FRAME_SIZE
+	stmib	sp, {r1 - r12}
+
+	ldmia	r0, {r1 - r3}
+	add	r0, sp, #S_PC		@ here for interlock avoidance
+	mov	r4, #-1			@  ""  ""     ""        ""
+
+	str	r1, [sp]		@ save the "real" r0 copied
+					@ from the exception stack
 
 #if __LINUX_ARM_ARCH__ < 6
 	@ make sure our user space atomic helper is aborted
@@ -307,8 +323,8 @@ __pabt_svc:
 	@
 	@ Also, separately save sp_usr and lr_usr
 	@
-	stmia	r5, {r2 - r4}
-	stmdb	r5, {sp, lr}^
+	stmia	r0, {r2 - r4}
+	stmdb	r0, {sp, lr}^
 
 	@
 	@ Enable the alignment trap while in kernel mode
@@ -323,7 +339,7 @@ __pabt_svc:
 
 	.align	5
 __dabt_usr:
-	usr_entry abt
+	usr_entry
 
 	@
 	@ Call the processor-specific abort handler:
@@ -352,7 +368,7 @@ __dabt_usr:
 
 	.align	5
 __irq_usr:
-	usr_entry irq
+	usr_entry
 
 	get_thread_info tsk
 #ifdef CONFIG_PREEMPT
@@ -360,6 +376,7 @@ __irq_usr:
 	add	r7, r8, #1			@ increment it
 	str	r7, [tsk, #TI_PREEMPT]
 #endif
+
 	irq_handler
 #ifdef CONFIG_PREEMPT
 	ldr	r0, [tsk, #TI_PREEMPT]
@@ -367,6 +384,7 @@ __irq_usr:
 	teq	r0, r7
 	strne	r0, [r0, -r0]
 #endif
+
 	mov	why, #0
 	b	ret_to_user
 
@@ -374,7 +392,7 @@ __irq_usr:
 
 	.align	5
 __und_usr:
-	usr_entry und
+	usr_entry
 
 	tst	r3, #PSR_T_BIT			@ Thumb mode?
 	bne	fpundefinstr			@ ignore FP
@@ -490,7 +508,7 @@ fpundefinstr:
 
 	.align	5
 __pabt_usr:
-	usr_entry abt
+	usr_entry
 
 	enable_irq				@ Enable interrupts
 	mov	r0, r2				@ address (pc)
@@ -749,29 +767,41 @@ __kuser_helper_end:
  *
  * Common stub entry macro:
  *   Enter in IRQ mode, spsr = SVC/USR CPSR, lr = SVC/USR PC
+ *
+ * SP points to a minimal amount of processor-private memory, the address
+ * of which is copied into r0 for the mode specific abort handler.
  */
-	.macro	vector_stub, name, sym, correction=0
+	.macro	vector_stub, name, correction=0
 	.align	5
 
 vector_\name:
-	ldr	r13, .LCs\sym
 	.if \correction
 	sub	lr, lr, #\correction
 	.endif
-	str	lr, [r13]			@ save lr_IRQ
+
+	@
+	@ Save r0, lr_<exception> (parent PC) and spsr_<exception>
+	@ (parent CPSR)
+	@
+	stmia	sp, {r0, lr}		@ save r0, lr
 	mrs	lr, spsr
-	str	lr, [r13, #4]			@ save spsr_IRQ
+	str	lr, [sp, #8]		@ save spsr
+
 	@
-	@ now branch to the relevant MODE handling routine
+	@ Prepare for SVC32 mode.  IRQs remain disabled.
 	@
-	mrs	r13, cpsr
-	bic	r13, r13, #MODE_MASK
-	orr	r13, r13, #SVC_MODE
-	msr	spsr_cxsf, r13			@ switch to SVC_32 mode
+	mrs	r0, cpsr
+	bic	r0, r0, #MODE_MASK
+	orr	r0, r0, #SVC_MODE
+	msr	spsr_cxsf, r0
 
-	and	lr, lr, #15
+	@
+	@ the branch table must immediately follow this code
+	@
+	mov	r0, sp
+	and	lr, lr, #0x0f
 	ldr	lr, [pc, lr, lsl #2]
-	movs	pc, lr				@ Changes mode and branches
+	movs	pc, lr			@ branch to handler in SVC mode
 	.endm
 
 	.globl	__stubs_start
@@ -779,7 +809,7 @@ __stubs_start:
 /*
  * Interrupt dispatcher
  */
-	vector_stub	irq, irq, 4
+	vector_stub	irq, 4
 
 	.long	__irq_usr			@  0  (USR_26 / USR_32)
 	.long	__irq_invalid			@  1  (FIQ_26 / FIQ_32)
@@ -802,7 +832,7 @@ __stubs_start:
  * Data abort dispatcher
  * Enter in ABT mode, spsr = USR CPSR, lr = USR PC
  */
-	vector_stub	dabt, abt, 8
+	vector_stub	dabt, 8
 
 	.long	__dabt_usr			@  0  (USR_26 / USR_32)
 	.long	__dabt_invalid			@  1  (FIQ_26 / FIQ_32)
@@ -825,7 +855,7 @@ __stubs_start:
  * Prefetch abort dispatcher
  * Enter in ABT mode, spsr = USR CPSR, lr = USR PC
  */
-	vector_stub	pabt, abt, 4
+	vector_stub	pabt, 4
 
 	.long	__pabt_usr			@  0 (USR_26 / USR_32)
 	.long	__pabt_invalid			@  1 (FIQ_26 / FIQ_32)
@@ -848,7 +878,7 @@ __stubs_start:
  * Undef instr entry dispatcher
  * Enter in UND mode, spsr = SVC/USR CPSR, lr = SVC/USR PC
  */
-	vector_stub	und, und
+	vector_stub	und
 
 	.long	__und_usr			@  0 (USR_26 / USR_32)
 	.long	__und_invalid			@  1 (FIQ_26 / FIQ_32)
@@ -902,13 +932,6 @@ vector_addrexcptn:
 .LCvswi:
 	.word	vector_swi
 
-.LCsirq:
-	.word	__temp_irq
-.LCsund:
-	.word	__temp_und
-.LCsabt:
-	.word	__temp_abt
-
 	.globl	__stubs_end
 __stubs_end:
 
@@ -930,23 +953,6 @@ __vectors_end:
 
 	.data
 
-/*
- * Do not reorder these, and do not insert extra data between...
- */
-
-__temp_irq:
-	.word	0				@ saved lr_irq
-	.word	0				@ saved spsr_irq
-	.word	-1				@ old_r0
-__temp_und:
-	.word	0				@ Saved lr_und
-	.word	0				@ Saved spsr_und
-	.word	-1				@ old_r0
-__temp_abt:
-	.word	0				@ Saved lr_abt
-	.word	0				@ Saved spsr_abt
-	.word	-1				@ old_r0
-
 	.globl	cr_alignment
 	.globl	cr_no_alignment
 cr_alignment:
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index c2a7da3..7ecdda3 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -92,6 +92,14 @@ struct cpu_user_fns cpu_user;
 struct cpu_cache_fns cpu_cache;
 #endif
 
+struct stack {
+	u32 irq[3];
+	u32 abt[3];
+	u32 und[3];
+} ____cacheline_aligned;
+
+static struct stack stacks[NR_CPUS];
+
 char elf_platform[ELF_PLATFORM_SIZE];
 EXPORT_SYMBOL(elf_platform);
 
@@ -307,8 +315,6 @@ static void __init setup_processor(void)
 	       cpu_name, processor_id, (int)processor_id & 15,
 	       proc_arch[cpu_architecture()]);
 
-	dump_cpu_info(smp_processor_id());
-
 	sprintf(system_utsname.machine, "%s%c", list->arch_name, ENDIANNESS);
 	sprintf(elf_platform, "%s%c", list->elf_name, ENDIANNESS);
 	elf_hwcap = list->elf_hwcap;
@@ -316,6 +322,46 @@ static void __init setup_processor(void)
 	cpu_proc_init();
 }
 
+/*
+ * cpu_init - initialise one CPU.
+ *
+ * cpu_init dumps the cache information, initialises SMP specific
+ * information, and sets up the per-CPU stacks.
+ */
+void __init cpu_init(void)
+{
+	unsigned int cpu = smp_processor_id();
+	struct stack *stk = &stacks[cpu];
+
+	if (cpu >= NR_CPUS) {
+		printk(KERN_CRIT "CPU%u: bad primary CPU number\n", cpu);
+		BUG();
+	}
+
+	dump_cpu_info(cpu);
+
+	/*
+	 * setup stacks for re-entrant exception handlers
+	 */
+	__asm__ (
+	"msr	cpsr_c, %1\n\t"
+	"add	sp, %0, %2\n\t"
+	"msr	cpsr_c, %3\n\t"
+	"add	sp, %0, %4\n\t"
+	"msr	cpsr_c, %5\n\t"
+	"add	sp, %0, %6\n\t"
+	"msr	cpsr_c, %7"
+	    :
+	    : "r" (stk),
+	      "I" (PSR_F_BIT | PSR_I_BIT | IRQ_MODE),
+	      "I" (offsetof(struct stack, irq[0])),
+	      "I" (PSR_F_BIT | PSR_I_BIT | ABT_MODE),
+	      "I" (offsetof(struct stack, abt[0])),
+	      "I" (PSR_F_BIT | PSR_I_BIT | UND_MODE),
+	      "I" (offsetof(struct stack, und[0])),
+	      "I" (PSR_F_BIT | PSR_I_BIT | SVC_MODE));
+}
+
 static struct machine_desc * __init setup_machine(unsigned int nr)
 {
 	struct machine_desc *list;
@@ -715,6 +761,8 @@ void __init setup_arch(char **cmdline_p)
 	paging_init(&meminfo, mdesc);
 	request_standard_resources(&meminfo, mdesc);
 
+	cpu_init();
+
 	/*
 	 * Set up various architecture-specific pointers
 	 */