Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 1658 insertions, 0 deletions

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
new file mode 100644
index 0000000..5e666aa
--- /dev/null
+++ b/arch/mips/Kconfig
@@ -0,0 +1,1658 @@
+config MIPS
+	bool
+	default y
+	# Horrible source of confusion.  Die, die, die ...
+	select EMBEDDED
+
+config MIPS64
+	bool "64-bit kernel"
+	help
+	  Select this option if you want to build a 64-bit kernel.  You should
+	  only select this option if you have hardware that actually has a
+	  64-bit processor and if your application will actually benefit from
+	  64-bit processing, otherwise say N.  You must say Y for kernels for
+	  SGI IP27 (Origin 200 and 2000) and SGI IP32 (O2).  If in doubt say N.
+
+config 64BIT
+	def_bool MIPS64
+
+config MIPS32
+	bool
+	depends on MIPS64 = 'n'
+	default y
+
+mainmenu "Linux/MIPS Kernel Configuration"
+
+source "init/Kconfig"
+
+menu "Machine selection"
+
+config MACH_JAZZ
+	bool "Support for the Jazz family of machines"
+	select ARC
+	select ARC32
+	select GENERIC_ISA_DMA
+	select I8259
+	select ISA
+	help
+	 This a family of machines based on the MIPS R4030 chipset which was
+	 used by several vendors to build RISC/os and Windows NT workstations.
+	 Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and
+	 Olivetti M700-10 workstations.
+
+config ACER_PICA_61
+	bool "Support for Acer PICA 1 chipset (EXPERIMENTAL)"
+	depends on MACH_JAZZ && EXPERIMENTAL
+	select DMA_NONCOHERENT
+	help
+	  This is a machine with a R4400 133/150 MHz CPU. To compile a Linux
+	  kernel that runs on these, say Y here. For details about Linux on
+	  the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
+	  <http://www.linux-mips.org/>.
+
+config MIPS_MAGNUM_4000
+	bool "Support for MIPS Magnum 4000"
+	depends on MACH_JAZZ
+	select DMA_NONCOHERENT
+	help
+	  This is a machine with a R4000 100 MHz CPU. To compile a Linux
+	  kernel that runs on these, say Y here. For details about Linux on
+	  the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
+	  <http://www.linux-mips.org/>.
+
+config OLIVETTI_M700
+	bool "Support for Olivetti M700-10"
+	depends on MACH_JAZZ
+	select DMA_NONCOHERENT
+	help
+	  This is a machine with a R4000 100 MHz CPU. To compile a Linux
+	  kernel that runs on these, say Y here. For details about Linux on
+	  the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
+	  <http://www.linux-mips.org/>.
+
+config MACH_VR41XX
+	bool "Support for NEC VR41XX-based machines"
+
+config NEC_CMBVR4133
+	bool "Support for NEC CMB-VR4133"
+	depends on MACH_VR41XX
+	select CPU_VR41XX
+	select DMA_NONCOHERENT
+	select IRQ_CPU
+	select HW_HAS_PCI
+	select PCI_VR41XX
+
+config ROCKHOPPER
+	bool "Support for Rockhopper baseboard"
+	depends on NEC_CMBVR4133
+	select I8259
+	select HAVE_STD_PC_SERIAL_PORT
+
+config CASIO_E55
+	bool "Support for CASIO CASSIOPEIA E-10/15/55/65"
+	depends on MACH_VR41XX
+	select DMA_NONCOHERENT
+	select IRQ_CPU
+	select ISA
+
+config IBM_WORKPAD
+	bool "Support for IBM WorkPad z50"
+	depends on MACH_VR41XX
+	select DMA_NONCOHERENT
+	select IRQ_CPU
+	select ISA
+
+config TANBAC_TB0226
+	bool "Support for TANBAC TB0226 (Mbase)"
+	depends on MACH_VR41XX
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select IRQ_CPU
+	help
+	  The TANBAC TB0226 (Mbase) is a MIPS-based platform manufactured by TANBAC.
+	  Please refer to <http://www.tanbac.co.jp/> about Mbase.
+
+config TANBAC_TB0229
+	bool "Support for TANBAC TB0229 (VR4131DIMM)"
+	depends on MACH_VR41XX
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select IRQ_CPU
+	help
+	  The TANBAC TB0229 (VR4131DIMM) is a MIPS-based platform manufactured by TANBAC.
+	  Please refer to <http://www.tanbac.co.jp/> about VR4131DIMM.
+
+config VICTOR_MPC30X
+	bool "Support for Victor MP-C303/304"
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select IRQ_CPU
+	depends on MACH_VR41XX
+
+config ZAO_CAPCELLA
+	bool "Support for ZAO Networks Capcella"
+	depends on MACH_VR41XX
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select IRQ_CPU
+
+config PCI_VR41XX
+	bool "Add PCI control unit support of NEC VR4100 series"
+	depends on MACH_VR41XX && PCI
+
+config VRC4171
+	tristate "Add NEC VRC4171 companion chip support"
+	depends on MACH_VR41XX && ISA
+	---help---
+	  The NEC VRC4171/4171A is a companion chip for NEC VR4111/VR4121.
+
+config VRC4173
+	tristate "Add NEC VRC4173 companion chip support"
+	depends on MACH_VR41XX && PCI_VR41XX
+	---help---
+	  The NEC VRC4173 is a companion chip for NEC VR4122/VR4131.
+
+config TOSHIBA_JMR3927
+	bool "Support for Toshiba JMR-TX3927 board"
+	depends on MIPS32
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select SWAP_IO_SPACE
+
+config MIPS_COBALT
+	bool "Support for Cobalt Server (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select I8259
+	select IRQ_CPU
+
+config MACH_DECSTATION
+	bool "Support for DECstations"
+	select BOOT_ELF32
+	select DMA_NONCOHERENT
+	select IRQ_CPU
+	depends on MIPS32 || EXPERIMENTAL
+	---help---
+	  This enables support for DEC's MIPS based workstations.  For details
+	  see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the
+	  DECstation porting pages on <http://decstation.unix-ag.org/>.
+
+	  If you have one of the following DECstation Models you definitely
+	  want to choose R4xx0 for the CPU Type:
+
+	  	DECstation 5000/50
+	  	DECstation 5000/150
+	  	DECstation 5000/260
+	  	DECsystem 5900/260
+
+	  otherwise choose R3000.
+
+config MIPS_EV64120
+	bool "Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select MIPS_GT64120
+	help
+	  This is an evaluation board based on the Galileo GT-64120
+	  single-chip system controller that contains a MIPS R5000 compatible
+	  core running at 75/100MHz.  Their website is located at
+	  <http://www.marvell.com/>.  Say Y here if you wish to build a
+	  kernel for this platform.
+
+config EVB_PCI1
+	bool "Enable Second PCI (PCI1)"
+	depends on MIPS_EV64120
+
+config MIPS_EV96100
+	bool "Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select IRQ_CPU
+	select MIPS_GT96100
+	select RM7000_CPU_SCACHE
+	select SWAP_IO_SPACE
+	help
+	  This is an evaluation board based on the Galileo GT-96100 LAN/WAN
+	  communications controllers containing a MIPS R5000 compatible core
+	  running at 83MHz. Their website is <http://www.marvell.com/>. Say Y
+	  here if you wish to build a kernel for this platform.
+
+config MIPS_IVR
+	bool "Support for Globespan IVR board"
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	help
+	  This is an evaluation board built by Globespan to showcase thir
+	  iVR (Internet Video Recorder) design. It utilizes a QED RM5231
+	  R5000 MIPS core. More information can be found out their website
+	  located at <http://www.globespan.net/>. Say Y here if you wish to
+	  build a kernel for this platform.
+
+config LASAT
+	bool "Support for LASAT Networks platforms"
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select MIPS_GT64120
+	select R5000_CPU_SCACHE
+
+config PICVUE
+	tristate "PICVUE LCD display driver"
+	depends on LASAT
+
+config PICVUE_PROC
+	tristate "PICVUE LCD display driver /proc interface"
+	depends on PICVUE
+
+config DS1603
+	bool "DS1603 RTC driver"
+	depends on LASAT
+
+config LASAT_SYSCTL
+	bool "LASAT sysctl interface"
+	depends on LASAT
+
+config MIPS_ITE8172
+	bool "Support for ITE 8172G board"
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	help
+	  Ths is an evaluation board made by ITE <http://www.ite.com.tw/>
+	  with ATX form factor that utilizes a MIPS R5000 to work with its
+	  ITE8172G companion internet appliance chip. The MIPS core can be
+	  either a NEC Vr5432 or QED RM5231. Say Y here if you wish to build
+	  a kernel for this platform.
+
+config IT8172_REVC
+	bool "Support for older IT8172 (Rev C)"
+	depends on MIPS_ITE8172
+	help
+	  Say Y here to support the older, Revision C version of the Integrated
+	  Technology Express, Inc. ITE8172 SBC.  Vendor page at
+	  <http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the
+	  board at <http://www.mvista.com/partners/semiconductor/ite.html>.
+
+config MIPS_ATLAS
+	bool "Support for MIPS Atlas board"
+	select BOOT_ELF32
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select MIPS_GT64120
+	select SWAP_IO_SPACE
+	help
+	  This enables support for the QED R5231-based MIPS Atlas evaluation
+	  board.
+
+config MIPS_MALTA
+	bool "Support for MIPS Malta board"
+	select BOOT_ELF32
+	select HAVE_STD_PC_SERIAL_PORT
+	select DMA_NONCOHERENT
+	select GENERIC_ISA_DMA
+	select HW_HAS_PCI
+	select I8259
+	select MIPS_GT64120
+	select SWAP_IO_SPACE
+	help
+	  This enables support for the VR5000-based MIPS Malta evaluation
+	  board.
+
+config MIPS_SEAD
+	bool "Support for MIPS SEAD board (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	select IRQ_CPU
+	select DMA_NONCOHERENT
+
+config MOMENCO_OCELOT
+	bool "Support for Momentum Ocelot board"
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select IRQ_CPU
+	select IRQ_CPU_RM7K
+	select MIPS_GT64120
+	select RM7000_CPU_SCACHE
+	select SWAP_IO_SPACE
+	help
+	  The Ocelot is a MIPS-based Single Board Computer (SBC) made by
+	  Momentum Computer <http://www.momenco.com/>.
+
+config MOMENCO_OCELOT_G
+	bool "Support for Momentum Ocelot-G board"
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select IRQ_CPU
+	select IRQ_CPU_RM7K
+	select PCI_MARVELL
+	select RM7000_CPU_SCACHE
+	select SWAP_IO_SPACE
+	help
+	  The Ocelot is a MIPS-based Single Board Computer (SBC) made by
+	  Momentum Computer <http://www.momenco.com/>.
+
+config MOMENCO_OCELOT_C
+	bool "Support for Momentum Ocelot-C board"
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select IRQ_CPU
+	select IRQ_MV64340
+	select PCI_MARVELL
+	select RM7000_CPU_SCACHE
+	select SWAP_IO_SPACE
+	help
+	  The Ocelot is a MIPS-based Single Board Computer (SBC) made by
+	  Momentum Computer <http://www.momenco.com/>.
+
+config MOMENCO_OCELOT_3
+	bool "Support for Momentum Ocelot-3 board"
+	select BOOT_ELF32
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select IRQ_CPU
+	select IRQ_CPU_RM7K
+	select IRQ_MV64340
+	select PCI_MARVELL
+	select RM7000_CPU_SCACHE
+	select SWAP_IO_SPACE
+	help
+	  The Ocelot-3 is based off Discovery III System Controller and
+	  PMC-Sierra Rm79000 core.
+
+config MOMENCO_JAGUAR_ATX
+	bool "Support for Momentum Jaguar board"
+	select BOOT_ELF32
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select IRQ_CPU
+	select IRQ_CPU_RM7K
+	select IRQ_MV64340
+	select LIMITED_DMA
+	select PCI_MARVELL
+	select RM7000_CPU_SCACHE
+	select SWAP_IO_SPACE
+	help
+	  The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by
+	  Momentum Computer <http://www.momenco.com/>.
+
+config JAGUAR_DMALOW
+	bool "Low DMA Mode"
+	depends on MOMENCO_JAGUAR_ATX
+	help
+	  Select to Y if jump JP5 is set on your board, N otherwise.  Normally
+	  the jumper is set, so if you feel unsafe, just say Y.
+
+config PMC_YOSEMITE
+	bool "Support for PMC-Sierra Yosemite eval board"
+	select DMA_COHERENT
+	select HW_HAS_PCI
+	select IRQ_CPU
+	select IRQ_CPU_RM7K
+	select IRQ_CPU_RM9K
+	select SWAP_IO_SPACE
+	help
+	  Yosemite is an evaluation board for the RM9000x2 processor
+	  manufactured by PMC-Sierra
+
+config HYPERTRANSPORT
+	bool "Hypertransport Support for PMC-Sierra Yosemite"
+	depends on PMC_YOSEMITE
+
+config DDB5074
+	bool "Support for NEC DDB Vrc-5074 (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	select DMA_NONCOHERENT
+	select HAVE_STD_PC_SERIAL_PORT
+	select HW_HAS_PCI
+	select IRQ_CPU
+	select I8259
+	select ISA
+	help
+	  This enables support for the VR5000-based NEC DDB Vrc-5074
+	  evaluation board.
+
+config DDB5476
+	bool "Support for NEC DDB Vrc-5476"
+	select DMA_NONCOHERENT
+	select HAVE_STD_PC_SERIAL_PORT
+	select HW_HAS_PCI
+	select IRQ_CPU
+	select I8259
+	select ISA
+	help
+	  This enables support for the R5432-based NEC DDB Vrc-5476
+	  evaluation board.
+
+	  Features : kernel debugging, serial terminal, NFS root fs, on-board
+	  ether port USB, AC97, PCI, PCI VGA card & framebuffer console,
+	  IDE controller, PS2 keyboard, PS2 mouse, etc.
+
+config DDB5477
+	bool "Support for NEC DDB Vrc-5477"
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select I8259
+	select IRQ_CPU
+	help
+	  This enables support for the R5432-based NEC DDB Vrc-5477,
+	  or Rockhopper/SolutionGear boards with R5432/R5500 CPUs.
+
+	  Features : kernel debugging, serial terminal, NFS root fs, on-board
+	  ether port USB, AC97, PCI, etc.
+
+config DDB5477_BUS_FREQUENCY
+	int "bus frequency (in kHZ, 0 for auto-detect)"
+	depends on DDB5477
+	default 0
+
+config NEC_OSPREY
+	bool "Support for NEC Osprey board"
+	select DMA_NONCOHERENT
+	select IRQ_CPU
+
+config SGI_IP22
+	bool "Support for SGI IP22 (Indy/Indigo2)"
+	select ARC
+	select ARC32
+	select BOOT_ELF32
+	select DMA_NONCOHERENT
+	select IP22_CPU_SCACHE
+	select IRQ_CPU
+	select SWAP_IO_SPACE
+	help
+	  This are the SGI Indy, Challenge S and Indigo2, as well as certain
+	  OEM variants like the Tandem CMN B006S. To compile a Linux kernel
+	  that runs on these, say Y here.
+
+config SGI_IP27
+	bool "Support for SGI IP27 (Origin200/2000)"
+	depends on MIPS64
+	select ARC
+	select ARC64
+	select DMA_IP27
+	select HW_HAS_PCI
+	select PCI_DOMAINS
+	help
+	  This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics
+	  workstations.  To compile a Linux kernel that runs on these, say Y
+	  here.
+
+#config SGI_SN0_XXL
+#	bool "IP27 XXL"
+#	depends on SGI_IP27
+#	  This options adds support for userspace processes upto 16TB size.
+#	  Normally the limit is just .5TB.
+
+config SGI_SN0_N_MODE
+	bool "IP27 N-Mode"
+	depends on SGI_IP27
+	help
+	  The nodes of Origin 200, Origin 2000 and Onyx 2 systems can be
+	  configured in either N-Modes which allows for more nodes or M-Mode
+	  which allows for more memory.  Your system is most probably
+	  running in M-Mode, so you should say N here.
+
+config DISCONTIGMEM
+	bool
+	default y if SGI_IP27
+	help
+	  Say Y to upport efficient handling of discontiguous physical memory,
+	  for architectures which are either NUMA (Non-Uniform Memory Access)
+	  or have huge holes in the physical address space for other reasons.
+	  See <file:Documentation/vm/numa> for more.
+
+config NUMA
+	bool "NUMA Support"
+	depends on SGI_IP27
+	help
+	  Say Y to compile the kernel to support NUMA (Non-Uniform Memory
+	  Access).  This option is for configuring high-end multiprocessor
+	  server machines.  If in doubt, say N.
+
+config MAPPED_KERNEL
+	bool "Mapped kernel support"
+	depends on SGI_IP27
+	help
+	  Change the way a Linux kernel is loaded into memory on a MIPS64
+	  machine.  This is required in order to support text replication and
+	  NUMA.  If you need to understand it, read the source code.
+
+config REPLICATE_KTEXT
+	bool "Kernel text replication support"
+	depends on SGI_IP27
+	help
+	  Say Y here to enable replicating the kernel text across multiple
+	  nodes in a NUMA cluster.  This trades memory for speed.
+
+config REPLICATE_EXHANDLERS
+	bool "Exception handler replication support"
+	depends on SGI_IP27
+	help
+	  Say Y here to enable replicating the kernel exception handlers
+	  across multiple nodes in a NUMA cluster. This trades memory for
+	  speed.
+
+config SGI_IP32
+	bool "Support for SGI IP32 (O2) (EXPERIMENTAL)"
+	depends on MIPS64 && EXPERIMENTAL
+	select ARC
+	select ARC32
+	select BOOT_ELF32
+	select OWN_DMA
+	select DMA_IP32
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select R5000_CPU_SCACHE
+	select RM7000_CPU_SCACHE
+	help
+	  If you want this kernel to run on SGI O2 workstation, say Y here.
+
+config SOC_AU1X00
+	depends on MIPS32
+	bool "Support for AMD/Alchemy Au1X00 SOCs"
+
+choice
+	prompt "Au1X00 SOC Type"
+	depends on SOC_AU1X00
+	help
+	  Say Y here to enable support for one of three AMD/Alchemy
+	  SOCs. For additional documentation see www.amd.com.
+
+config SOC_AU1000
+	bool "SOC_AU1000"
+config SOC_AU1100
+	bool "SOC_AU1100"
+config SOC_AU1500
+	bool "SOC_AU1500"
+config SOC_AU1550
+	bool "SOC_AU1550"
+
+endchoice
+
+choice
+	prompt "AMD/Alchemy Au1x00 board support"
+	depends on SOC_AU1X00
+	help
+	  These are evaluation boards built by AMD/Alchemy to
+	  showcase their Au1X00 Internet Edge Processors. The SOC design
+	  is based on the MIPS32 architecture running at 266/400/500MHz
+	  with many integrated peripherals. Further information can be
+	  found at their website, <http://www.amd.com/>. Say Y here if you
+	  wish to build a kernel for this platform.
+
+config MIPS_PB1000
+	bool "PB1000 board"
+	depends on SOC_AU1000
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select SWAP_IO_SPACE
+
+config MIPS_PB1100
+	bool "PB1100 board"
+	depends on SOC_AU1100
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select SWAP_IO_SPACE
+
+config MIPS_PB1500
+	bool "PB1500 board"
+	depends on SOC_AU1500
+	select DMA_COHERENT
+	select HW_HAS_PCI
+
+config MIPS_PB1550
+	bool "PB1550 board"
+	depends on SOC_AU1550
+	select DMA_COHERENT
+	select HW_HAS_PCI
+	select MIPS_DISABLE_OBSOLETE_IDE
+
+config MIPS_DB1000
+	bool "DB1000 board"
+	depends on SOC_AU1000
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+
+config MIPS_DB1100
+	bool "DB1100 board"
+	depends on SOC_AU1100
+	select DMA_NONCOHERENT
+
+config MIPS_DB1500
+	bool "DB1500 board"
+	depends on SOC_AU1500
+	select DMA_COHERENT
+	select HW_HAS_PCI
+	select MIPS_DISABLE_OBSOLETE_IDE
+
+config MIPS_DB1550
+	bool "DB1550 board"
+	depends on SOC_AU1550
+	select HW_HAS_PCI
+	select DMA_COHERENT
+	select MIPS_DISABLE_OBSOLETE_IDE
+
+config MIPS_BOSPORUS
+	bool "Bosporus board"
+	depends on SOC_AU1500
+	select DMA_NONCOHERENT
+
+config MIPS_MIRAGE
+	bool "Mirage board"
+	depends on SOC_AU1500
+	select DMA_NONCOHERENT
+
+config MIPS_XXS1500
+	bool "MyCable XXS1500 board"
+	depends on SOC_AU1500
+	select DMA_NONCOHERENT
+
+config MIPS_MTX1
+	bool "4G Systems MTX-1 board"
+	depends on SOC_AU1500
+	select HW_HAS_PCI
+	select DMA_NONCOHERENT
+
+endchoice
+
+config SIBYTE_SB1xxx_SOC
+	bool "Support for Broadcom BCM1xxx SOCs (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	select BOOT_ELF32
+	select DMA_COHERENT
+	select SWAP_IO_SPACE
+
+choice
+	prompt "BCM1xxx SOC-based board"
+	depends on SIBYTE_SB1xxx_SOC
+	default SIBYTE_SWARM
+	help
+	  Enable support for boards based on the SiByte line of SOCs
+	  from Broadcom.  There are configurations for the known
+	  evaluation boards, or you can choose "Other" and add your
+	  own board support code.
+
+config SIBYTE_SWARM
+	bool "BCM91250A-SWARM"
+	select SIBYTE_SB1250
+
+config SIBYTE_SENTOSA
+	bool "BCM91250E-Sentosa"
+	select SIBYTE_SB1250
+
+config SIBYTE_RHONE
+	bool "BCM91125E-Rhone"
+	select SIBYTE_BCM1125H
+
+config SIBYTE_CARMEL
+	bool "BCM91120x-Carmel"
+	select SIBYTE_BCM1120
+
+config SIBYTE_PTSWARM
+	bool "BCM91250PT-PTSWARM"
+	select SIBYTE_SB1250
+
+config SIBYTE_LITTLESUR
+	bool "BCM91250C2-LittleSur"
+	select SIBYTE_SB1250
+
+config SIBYTE_CRHINE
+	bool "BCM91120C-CRhine"
+	select SIBYTE_BCM1120
+
+config SIBYTE_CRHONE
+	bool "BCM91125C-CRhone"
+	select SIBYTE_BCM1125
+
+config SIBYTE_UNKNOWN
+	bool "Other"
+
+endchoice
+
+config SIBYTE_BOARD
+	bool
+	depends on SIBYTE_SB1xxx_SOC && !SIBYTE_UNKNOWN
+	default y
+
+choice
+	prompt "BCM1xxx SOC Type"
+	depends on SIBYTE_UNKNOWN
+	default SIBYTE_UNK_BCM1250
+	help
+	  Since you haven't chosen a known evaluation board from
+	  Broadcom, you must explicitly pick the SOC this kernel is
+	  targetted for.
+
+config SIBYTE_UNK_BCM1250
+	bool "BCM1250"
+	select SIBYTE_SB1250
+
+config SIBYTE_UNK_BCM1120
+	bool "BCM1120"
+	select SIBYTE_BCM1120
+
+config SIBYTE_UNK_BCM1125
+	bool "BCM1125"
+	select SIBYTE_BCM1125
+
+config SIBYTE_UNK_BCM1125H
+	bool "BCM1125H"
+	select SIBYTE_BCM1125H
+
+endchoice
+
+config SIBYTE_SB1250
+	bool
+	select HW_HAS_PCI
+
+config SIBYTE_BCM1120
+	bool
+	select SIBYTE_BCM112X
+
+config SIBYTE_BCM1125
+	bool
+	select HW_HAS_PCI
+	select SIBYTE_BCM112X
+
+config SIBYTE_BCM1125H
+	bool
+	select HW_HAS_PCI
+	select SIBYTE_BCM112X
+
+config SIBYTE_BCM112X
+	bool
+
+choice
+	prompt "SiByte SOC Stepping"
+	depends on SIBYTE_SB1xxx_SOC
+
+config CPU_SB1_PASS_1
+	bool "1250 Pass1"
+	depends on SIBYTE_SB1250
+	select CPU_HAS_PREFETCH
+
+config CPU_SB1_PASS_2_1250
+	bool "1250 An"
+	depends on SIBYTE_SB1250
+	select CPU_SB1_PASS_2
+	help
+	  Also called BCM1250 Pass 2
+
+config CPU_SB1_PASS_2_2
+	bool "1250 Bn"
+	depends on SIBYTE_SB1250
+	select CPU_HAS_PREFETCH
+	help
+	  Also called BCM1250 Pass 2.2
+
+config CPU_SB1_PASS_4
+	bool "1250 Cn"
+	depends on SIBYTE_SB1250
+	select CPU_HAS_PREFETCH
+	help
+	  Also called BCM1250 Pass 3
+
+config CPU_SB1_PASS_2_112x
+	bool "112x Hybrid"
+	depends on SIBYTE_BCM112X
+	select CPU_SB1_PASS_2
+
+config CPU_SB1_PASS_3
+	bool "112x An"
+	depends on SIBYTE_BCM112X
+	select CPU_HAS_PREFETCH
+
+endchoice
+
+config CPU_SB1_PASS_2
+	bool
+
+config SIBYTE_HAS_LDT
+	bool
+	depends on PCI && (SIBYTE_SB1250 || SIBYTE_BCM1125H)
+	default y
+
+config SIMULATION
+	bool "Running under simulation"
+	depends on SIBYTE_SB1xxx_SOC
+	help
+	  Build a kernel suitable for running under the GDB simulator.
+	  Primarily adjusts the kernel's notion of time.
+
+config SIBYTE_CFE
+	bool "Booting from CFE"
+	depends on SIBYTE_SB1xxx_SOC
+	help
+	  Make use of the CFE API for enumerating available memory,
+	  controlling secondary CPUs, and possibly console output.
+
+config SIBYTE_CFE_CONSOLE
+	bool "Use firmware console"
+	depends on SIBYTE_CFE
+	help
+	  Use the CFE API's console write routines during boot.  Other console
+	  options (VT console, sb1250 duart console, etc.) should not be
+	  configured.
+
+config SIBYTE_STANDALONE
+	bool
+	depends on SIBYTE_SB1xxx_SOC && !SIBYTE_CFE
+	default y
+
+config SIBYTE_STANDALONE_RAM_SIZE
+	int "Memory size (in megabytes)"
+	depends on SIBYTE_STANDALONE
+	default "32"
+
+config SIBYTE_BUS_WATCHER
+	bool "Support for Bus Watcher statistics"
+	depends on SIBYTE_SB1xxx_SOC
+	help
+	  Handle and keep statistics on the bus error interrupts (COR_ECC,
+	  BAD_ECC, IO_BUS).
+
+config SIBYTE_BW_TRACE
+	bool "Capture bus trace before bus error"
+	depends on SIBYTE_BUS_WATCHER
+	help
+	  Run a continuous bus trace, dumping the raw data as soon as
+	  a ZBbus error is detected.  Cannot work if ZBbus profiling
+	  is turned on, and also will interfere with JTAG-based trace
+	  buffer activity.  Raw buffer data is dumped to console, and
+	  must be processed off-line.
+
+config SIBYTE_SB1250_PROF
+	bool "Support for SB1/SOC profiling - SB1/SCD perf counters"
+	depends on SIBYTE_SB1xxx_SOC
+
+config SIBYTE_TBPROF
+	bool "Support for ZBbus profiling"
+	depends on SIBYTE_SB1xxx_SOC
+
+config SNI_RM200_PCI
+	bool "Support for SNI RM200 PCI"
+	select ARC
+	select ARC32
+	select BOOT_ELF32
+	select DMA_NONCOHERENT
+	select GENERIC_ISA_DMA
+	select HAVE_STD_PC_SERIAL_PORT
+	select HW_HAS_PCI
+	select I8259
+	select ISA
+	help
+	  The SNI RM200 PCI was a MIPS-based platform manufactured by Siemens
+	  Nixdorf Informationssysteme (SNI), parent company of Pyramid
+	  Technology and now in turn merged with Fujitsu.  Say Y here to
+	  support this machine type.
+
+config TOSHIBA_RBTX4927
+	bool "Support for Toshiba TBTX49[23]7 board"
+	depends on MIPS32
+	select DMA_NONCOHERENT
+	select HAS_TXX9_SERIAL
+	select HW_HAS_PCI
+	select I8259
+	select ISA
+	select SWAP_IO_SPACE
+	help
+	  This Toshiba board is based on the TX4927 processor. Say Y here to
+	  support this machine type
+
+config TOSHIBA_FPCIB0
+	bool "FPCIB0 Backplane Support"
+	depends on TOSHIBA_RBTX4927
+
+config RWSEM_GENERIC_SPINLOCK
+	bool
+	default y
+
+config RWSEM_XCHGADD_ALGORITHM
+	bool
+
+config GENERIC_CALIBRATE_DELAY
+	bool
+	default y
+
+config HAVE_DEC_LOCK
+	bool
+	default y
+
+#
+# Select some configuration options automatically based on user selections.
+#
+config ARC
+	bool
+	depends on SNI_RM200_PCI || SGI_IP32 || SGI_IP27 || SGI_IP22 || MIPS_MAGNUM_4000 || OLIVETTI_M700 || ACER_PICA_61
+	default y
+
+config	DMA_COHERENT
+	bool
+
+config	DMA_IP27
+	bool
+
+config	DMA_NONCOHERENT
+	bool
+
+config EARLY_PRINTK
+	bool
+	depends on MACH_DECSTATION
+	default y
+
+config GENERIC_ISA_DMA
+	bool
+	depends on SNI_RM200_PCI || MIPS_MAGNUM_4000 || OLIVETTI_M700 || ACER_PICA_61 || MIPS_MALTA
+	default y
+
+config I8259
+	bool
+	depends on SNI_RM200_PCI || DDB5477 || DDB5476 || DDB5074 || MACH_JAZZ || MIPS_MALTA || MIPS_COBALT
+	default y
+
+config LIMITED_DMA
+	bool
+	select HIGHMEM
+
+config MIPS_BONITO64
+	bool
+	depends on MIPS_ATLAS || MIPS_MALTA
+	default y
+
+config MIPS_MSC
+	bool
+	depends on MIPS_ATLAS || MIPS_MALTA
+	default y
+
+config MIPS_NILE4
+	bool
+	depends on LASAT
+	default y
+
+config MIPS_DISABLE_OBSOLETE_IDE
+	bool
+
+config CPU_LITTLE_ENDIAN
+	bool "Generate little endian code"
+	default y if ACER_PICA_61 || CASIO_E55 || DDB5074 || DDB5476 || DDB5477 || MACH_DECSTATION || IBM_WORKPAD || LASAT || MIPS_COBALT || MIPS_ITE8172 || MIPS_IVR || SOC_AU1X00 || NEC_OSPREY || OLIVETTI_M700 || SNI_RM200_PCI || VICTOR_MPC30X || ZAO_CAPCELLA
+	default n if MIPS_EV64120 || MIPS_EV96100 || MOMENCO_OCELOT || MOMENCO_OCELOT_G || SGI_IP22 || SGI_IP27 || SGI_IP32 || TOSHIBA_JMR3927
+	help
+	  Some MIPS machines can be configured for either little or big endian
+	  byte order. These modes require different kernels. Say Y if your
+	  machine is little endian, N if it's a big endian machine.
+
+config IRQ_CPU
+	bool
+
+config IRQ_CPU_RM7K
+	bool
+
+config IRQ_MV64340
+	bool
+
+config DDB5XXX_COMMON
+	bool
+	depends on DDB5074 || DDB5476 || DDB5477
+	default y
+
+config MIPS_BOARDS_GEN
+	bool
+	depends on MIPS_ATLAS || MIPS_MALTA || MIPS_SEAD
+	default y
+
+config MIPS_GT64111
+	bool
+	depends on MIPS_COBALT
+	default y
+
+config MIPS_GT64120
+	bool
+	depends on MIPS_EV64120 || MIPS_EV96100 || LASAT || MIPS_ATLAS || MIPS_MALTA || MOMENCO_OCELOT
+	default y
+
+config MIPS_TX3927
+	bool
+	depends on TOSHIBA_JMR3927
+	select HAS_TXX9_SERIAL
+	default y
+
+config PCI_MARVELL
+	bool
+
+config ITE_BOARD_GEN
+	bool
+	depends on MIPS_IVR || MIPS_ITE8172
+	default y
+
+config SWAP_IO_SPACE
+	bool
+
+#
+# Unfortunately not all GT64120 systems run the chip at the same clock.
+# As the user for the clock rate and try to minimize the available options.
+#
+choice
+	prompt "Galileo Chip Clock"
+	#default SYSCLK_83 if MIPS_EV64120
+	depends on MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G
+	default SYSCLK_83 if MIPS_EV64120
+	default SYSCLK_100 if MOMENCO_OCELOT || MOMENCO_OCELOT_G
+
+config SYSCLK_75
+	bool "75" if MIPS_EV64120
+
+config SYSCLK_83
+	bool "83.3" if MIPS_EV64120
+
+config SYSCLK_100
+	bool "100" if MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G
+
+endchoice
+
+config AU1X00_USB_DEVICE
+	bool
+	depends on MIPS_PB1500 || MIPS_PB1100 || MIPS_PB1000
+	default n
+
+config MIPS_GT96100
+	bool
+	depends on MIPS_EV96100
+	default y
+	help
+	  Say Y here to support the Galileo Technology GT96100 communications
+	  controller card.  There is a web page at <http://www.galileot.com/>.
+
+config IT8172_CIR
+	bool
+	depends on MIPS_ITE8172 || MIPS_IVR
+	default y
+
+config IT8712
+	bool
+	depends on MIPS_ITE8172
+	default y
+
+config BOOT_ELF32
+	bool
+	depends on MACH_DECSTATION || MIPS_ATLAS || MIPS_MALTA || MOMENCO_JAGUAR_ATX || MOMENCO_OCELOT_3 || SIBYTE_SB1xxx_SOC || SGI_IP32 || SGI_IP22 || SNI_RM200_PCI
+	default y
+
+config MIPS_L1_CACHE_SHIFT
+	int
+	default "4" if MACH_DECSTATION
+	default "7" if SGI_IP27
+	default "5"
+
+config ARC32
+	bool
+	depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32
+	default y
+
+config FB
+	bool
+	depends on MIPS_MAGNUM_4000 || OLIVETTI_M700
+	default y
+	---help---
+	  The frame buffer device provides an abstraction for the graphics
+	  hardware. It represents the frame buffer of some video hardware and
+	  allows application software to access the graphics hardware through
+	  a well-defined interface, so the software doesn't need to know
+	  anything about the low-level (hardware register) stuff.
+
+	  Frame buffer devices work identically across the different
+	  architectures supported by Linux and make the implementation of
+	  application programs easier and more portable; at this point, an X
+	  server exists which uses the frame buffer device exclusively.
+	  On several non-X86 architectures, the frame buffer device is the
+	  only way to use the graphics hardware.
+
+	  The device is accessed through special device nodes, usually located
+	  in the /dev directory, i.e. /dev/fb*.
+
+	  You need an utility program called fbset to make full use of frame
+	  buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
+	  and the Framebuffer-HOWTO at <http://www.tldp.org/docs.html#howto>
+	  for more information.
+
+	  Say Y here and to the driver for your graphics board below if you
+	  are compiling a kernel for a non-x86 architecture.
+
+	  If you are compiling for the x86 architecture, you can say Y if you
+	  want to play with it, but it is not essential. Please note that
+	  running graphical applications that directly touch the hardware
+	  (e.g. an accelerated X server) and that are not frame buffer
+	  device-aware may cause unexpected results. If unsure, say N.
+
+config HAVE_STD_PC_SERIAL_PORT
+	bool
+
+config VR4181
+	bool
+	depends on NEC_OSPREY
+	default y
+
+config ARC_CONSOLE
+	bool "ARC console support"
+	depends on SGI_IP22 || SNI_RM200_PCI
+
+config ARC_MEMORY
+	bool
+	depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP32
+	default y
+
+config ARC_PROMLIB
+	bool
+	depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32
+	default y
+
+config ARC64
+	bool
+	depends on SGI_IP27
+	default y
+
+config BOOT_ELF64
+	bool
+	depends on SGI_IP27
+	default y
+
+#config MAPPED_PCI_IO y
+#	bool
+#	depends on SGI_IP27
+#	default y
+
+config QL_ISP_A64
+	bool
+	depends on SGI_IP27
+	default y
+
+config TOSHIBA_BOARDS
+	bool
+	depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927
+	default y
+
+endmenu
+
+menu "CPU selection"
+
+choice
+	prompt "CPU type"
+	default CPU_R4X00
+
+config CPU_MIPS32
+	bool "MIPS32"
+
+config CPU_MIPS64
+	bool "MIPS64"
+
+config CPU_R3000
+	bool "R3000"
+	depends on MIPS32
+	help
+	  Please make sure to pick the right CPU type. Linux/MIPS is not
+	  designed to be generic, i.e. Kernels compiled for R3000 CPUs will
+	  *not* work on R4000 machines and vice versa.  However, since most
+	  of the supported machines have an R4000 (or similar) CPU, R4x00
+	  might be a safe bet.  If the resulting kernel does not work,
+	  try to recompile with R3000.
+
+config CPU_TX39XX
+	bool "R39XX"
+	depends on MIPS32
+
+config CPU_VR41XX
+	bool "R41xx"
+	help
+	  The options selects support for the NEC VR41xx series of processors.
+	  Only choose this option if you have one of these processors as a
+	  kernel built with this option will not run on any other type of
+	  processor or vice versa.
+
+config CPU_R4300
+	bool "R4300"
+	help
+	  MIPS Technologies R4300-series processors.
+
+config CPU_R4X00
+	bool "R4x00"
+	help
+	  MIPS Technologies R4000-series processors other than 4300, including
+	  the R4000, R4400, R4600, and 4700.
+
+config CPU_TX49XX
+	bool "R49XX"
+
+config CPU_R5000
+	bool "R5000"
+	help
+	  MIPS Technologies R5000-series processors other than the Nevada.
+
+config CPU_R5432
+	bool "R5432"
+
+config CPU_R6000
+	bool "R6000"
+	depends on MIPS32 && EXPERIMENTAL
+	help
+	  MIPS Technologies R6000 and R6000A series processors.  Note these
+	  processors are extremly rare and the support for them is incomplete.
+
+config CPU_NEVADA
+	bool "RM52xx"
+	help
+	  QED / PMC-Sierra RM52xx-series ("Nevada") processors.
+
+config CPU_R8000
+	bool "R8000"
+	depends on MIPS64 && EXPERIMENTAL
+	help
+	  MIPS Technologies R8000 processors.  Note these processors are
+	  uncommon and the support for them is incomplete.
+
+config CPU_R10000
+	bool "R10000"
+	help
+	  MIPS Technologies R10000-series processors.
+
+config CPU_RM7000
+	bool "RM7000"
+
+config CPU_RM9000
+	bool "RM9000"
+
+config CPU_SB1
+	bool "SB1"
+
+endchoice
+
+choice
+	prompt "Kernel page size"
+	default PAGE_SIZE_4KB
+
+config PAGE_SIZE_4KB
+	bool "4kB"
+	help
+	 This option select the standard 4kB Linux page size.  On some
+	 R3000-family processors this is the only available page size.  Using
+	 4kB page size will minimize memory consumption and is therefore
+	 recommended for low memory systems.
+
+config PAGE_SIZE_8KB
+	bool "8kB"
+	depends on EXPERIMENTAL && CPU_R8000
+	help
+	  Using 8kB page size will result in higher performance kernel at
+	  the price of higher memory consumption.  This option is available
+	  only on the R8000 processor.  Not that at the time of this writing
+	  this option is still high experimental; there are also issues with
+	  compatibility of user applications.
+
+config PAGE_SIZE_16KB
+	bool "16kB"
+	depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX
+	help
+	  Using 16kB page size will result in higher performance kernel at
+	  the price of higher memory consumption.  This option is available on
+	  all non-R3000 family processor.  Not that at the time of this
+	  writing this option is still high experimental; there are also
+	  issues with compatibility of user applications.
+
+config PAGE_SIZE_64KB
+	bool "64kB"
+	depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX
+	help
+	  Using 64kB page size will result in higher performance kernel at
+	  the price of higher memory consumption.  This option is available on
+	  all non-R3000 family processor.  Not that at the time of this
+	  writing this option is still high experimental; there are also
+	  issues with compatibility of user applications.
+
+endchoice
+
+config BOARD_SCACHE
+	bool
+
+config IP22_CPU_SCACHE
+	bool
+	select BOARD_SCACHE
+
+config R5000_CPU_SCACHE
+	bool
+	select BOARD_SCACHE
+
+config RM7000_CPU_SCACHE
+	bool
+	select BOARD_SCACHE
+
+config SIBYTE_DMA_PAGEOPS
+	bool "Use DMA to clear/copy pages"
+	depends on CPU_SB1
+	help
+	  Instead of using the CPU to zero and copy pages, use a Data Mover
+	  channel.  These DMA channels are otherwise unused by the standard
+	  SiByte Linux port.  Seems to give a small performance benefit.
+
+config CPU_HAS_PREFETCH
+	bool "Enable prefetches" if CPU_SB1 && !CPU_SB1_PASS_2
+	default y if CPU_MIPS32 || CPU_MIPS64 || CPU_RM7000 || CPU_RM9000 || CPU_R10000
+
+config VTAG_ICACHE
+	bool "Support for Virtual Tagged I-cache" if CPU_MIPS64 || CPU_MIPS32
+	default y if CPU_SB1
+
+config SB1_PASS_1_WORKAROUNDS
+	bool
+	depends on CPU_SB1_PASS_1
+	default y
+
+config SB1_PASS_2_WORKAROUNDS
+	bool
+	depends on CPU_SB1 && (CPU_SB1_PASS_2_2 || CPU_SB1_PASS_2)
+	default y
+
+config SB1_PASS_2_1_WORKAROUNDS
+	bool
+	depends on CPU_SB1 && CPU_SB1_PASS_2
+	default y
+
+config 64BIT_PHYS_ADDR
+	bool "Support for 64-bit physical address space"
+	depends on (CPU_R4X00 || CPU_R5000 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 || CPU_SB1 || CPU_MIPS32 || CPU_MIPS64) && MIPS32
+
+config CPU_ADVANCED
+	bool "Override CPU Options"
+	depends on MIPS32
+	help
+	  Saying yes here allows you to select support for various features
+	  your CPU may or may not have.  Most people should say N here.
+
+config CPU_HAS_LLSC
+	bool "ll/sc Instructions available" if CPU_ADVANCED
+	default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX
+	help
+	  MIPS R4000 series and later provide the Load Linked (ll)
+	  and Store Conditional (sc) instructions. More information is
+	  available at <http://www.go-ecs.com/mips/miptek1.htm>.
+
+	  Say Y here if your CPU has the ll and sc instructions.  Say Y here
+	  for better performance, N if you don't know.  You must say Y here
+	  for multiprocessor machines.
+
+config CPU_HAS_LLDSCD
+	bool "lld/scd Instructions available" if CPU_ADVANCED
+	default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX && !CPU_MIPS32
+	help
+	  Say Y here if your CPU has the lld and scd instructions, the 64-bit
+	  equivalents of ll and sc.  Say Y here for better performance, N if
+	  you don't know.  You must say Y here for multiprocessor machines.
+
+config CPU_HAS_WB
+	bool "Writeback Buffer available" if CPU_ADVANCED
+	default y if !CPU_ADVANCED && CPU_R3000 && MACH_DECSTATION
+	help
+	  Say N here for slightly better performance.  You must say Y here for
+	  machines which require flushing of write buffers in software.  Saying
+	  Y is the safe option; N may result in kernel malfunction and crashes.
+
+config CPU_HAS_SYNC
+	bool
+	depends on !CPU_R3000
+	default y
+
+#
+# - Highmem only makes sense for the 32-bit kernel.
+# - The current highmem code will only work properly on physically indexed
+#   caches such as R3000, SB1, R7000 or those that look like they're virtually
+#   indexed such as R4000/R4400 SC and MC versions or R10000.  So for the
+#   moment we protect the user and offer the highmem option only on machines
+#   where it's known to be safe.  This will not offer highmem on a few systems
+#   such as MIPS32 and MIPS64 CPUs which may have virtual and physically
+#   indexed CPUs but we're playing safe.
+# - We should not offer highmem for system of which we already know that they
+#   don't have memory configurations that could gain from highmem support in
+#   the kernel because they don't support configurations with RAM at physical
+#   addresses > 0x20000000.
+#
+config HIGHMEM
+	bool "High Memory Support"
+	depends on MIPS32 && (CPU_R3000 || CPU_SB1 || CPU_R7000 || CPU_RM9000 || CPU_R10000) && !(MACH_DECSTATION || MOMENCO_JAGUAR_ATX)
+
+config SMP
+	bool "Multi-Processing support"
+	depends on CPU_RM9000 || (SIBYTE_SB1250 && !SIBYTE_STANDALONE) || SGI_IP27
+	---help---
+	  This enables support for systems with more than one CPU. If you have
+	  a system with only one CPU, like most personal computers, say N. If
+	  you have a system with more than one CPU, say Y.
+
+	  If you say N here, the kernel will run on single and multiprocessor
+	  machines, but will use only one CPU of a multiprocessor machine. If
+	  you say Y here, the kernel will run on many, but not all,
+	  singleprocessor machines. On a singleprocessor machine, the kernel
+	  will run faster if you say N here.
+
+	  People using multiprocessor machines who say Y here should also say
+	  Y to "Enhanced Real Time Clock Support", below.
+
+	  See also the <file:Documentation/smp.txt> and the SMP-HOWTO
+	  available at <http://www.tldp.org/docs.html#howto>.
+
+	  If you don't know what to do here, say N.
+
+config NR_CPUS
+	int "Maximum number of CPUs (2-64)"
+	range 2 64
+	depends on SMP
+	default "64" if SGI_IP27
+	default "2"
+	help
+	  This allows you to specify the maximum number of CPUs which this
+	  kernel will support.  The maximum supported value is 32 for 32-bit
+	  kernel and 64 for 64-bit kernels; the minimum value which makes
+	  sense is 2.
+
+	  This is purely to save memory - each supported CPU adds
+	  approximately eight kilobytes to the kernel image.
+
+config PREEMPT
+	bool "Preemptible Kernel"
+	help
+	  This option reduces the latency of the kernel when reacting to
+	  real-time or interactive events by allowing a low priority process to
+	  be preempted even if it is in kernel mode executing a system call.
+	  This allows applications to run more reliably even when the system is
+	  under load.
+
+config RTC_DS1742
+	bool "DS1742 BRAM/RTC support"
+	depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927
+
+config MIPS_INSANE_LARGE
+	bool "Support for large 64-bit configurations"
+	depends on CPU_R10000 && MIPS64
+	help
+	  MIPS R10000 does support a 44 bit / 16TB address space as opposed to
+	  previous 64-bit processors which only supported 40 bit / 1TB. If you
+	  need processes of more than 1TB virtual address space, say Y here.
+	  This will result in additional memory usage, so it is not
+	  recommended for normal users.
+
+config RWSEM_GENERIC_SPINLOCK
+	bool
+	default y
+
+endmenu
+
+menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
+
+config HW_HAS_PCI
+	bool
+
+config PCI
+	bool "Support for PCI controller"
+	depends on HW_HAS_PCI
+	help
+	  Find out whether you have a PCI motherboard. PCI is the name of a
+	  bus system, i.e. the way the CPU talks to the other stuff inside
+	  your box. Other bus systems are ISA, EISA, or VESA. If you have PCI,
+	  say Y, otherwise N.
+
+	  The PCI-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>, contains valuable
+	  information about which PCI hardware does work under Linux and which
+	  doesn't.
+
+config PCI_DOMAINS
+	bool
+	depends on PCI
+
+source "drivers/pci/Kconfig"
+
+#
+# ISA support is now enabled via select.  Too many systems still have the one
+# or other ISA chip on the board that users don't know about so don't expect
+# users to choose the right thing ...
+#
+config ISA
+	bool
+
+config EISA
+	bool "EISA support"
+	depends on SGI_IP22 || SNI_RM200_PCI
+	select ISA
+	---help---
+	  The Extended Industry Standard Architecture (EISA) bus was
+	  developed as an open alternative to the IBM MicroChannel bus.
+
+	  The EISA bus provided some of the features of the IBM MicroChannel
+	  bus while maintaining backward compatibility with cards made for
+	  the older ISA bus.  The EISA bus saw limited use between 1988 and
+	  1995 when it was made obsolete by the PCI bus.
+
+	  Say Y here if you are building a kernel for an EISA-based machine.
+
+	  Otherwise, say N.
+
+source "drivers/eisa/Kconfig"
+
+config TC
+	bool "TURBOchannel support"
+	depends on MACH_DECSTATION
+	help
+	  TurboChannel is a DEC (now Compaq (now HP)) bus for Alpha and MIPS
+	  processors.  Documentation on writing device drivers for TurboChannel
+	  is available at:
+	  <http://www.cs.arizona.edu/computer.help/policy/DIGITAL_unix/AA-PS3HD-TET1_html/TITLE.html>.
+
+#config ACCESSBUS
+#	bool "Access.Bus support"
+#	depends on TC
+
+config MMU
+	bool
+	default y
+
+config MCA
+	bool
+
+config SBUS
+	bool
+
+source "drivers/pcmcia/Kconfig"
+
+source "drivers/pci/hotplug/Kconfig"
+
+endmenu
+
+menu "Executable file formats"
+
+source "fs/Kconfig.binfmt"
+
+config TRAD_SIGNALS
+	bool
+	default y if MIPS32
+
+config BUILD_ELF64
+	bool "Use 64-bit ELF format for building"
+	depends on MIPS64
+	help
+	  A 64-bit kernel is usually built using the 64-bit ELF binary object
+	  format as it's one that allows arbitrary 64-bit constructs.  For
+	  kernels that are loaded within the KSEG compatibility segments the
+	  32-bit ELF format can optionally be used resulting in a somewhat
+	  smaller binary, but this option is not explicitly supported by the
+	  toolchain and since binutils 2.14 it does not even work at all.
+
+	  Say Y to use the 64-bit format or N to use the 32-bit one.
+
+	  If unsure say Y.
+
+config BINFMT_IRIX
+	bool "Include IRIX binary compatibility"
+	depends on !CPU_LITTLE_ENDIAN && MIPS32 && BROKEN
+
+config MIPS32_COMPAT
+	bool "Kernel support for Linux/MIPS 32-bit binary compatibility"
+	depends on MIPS64
+	help
+	  Select this option if you want Linux/MIPS 32-bit binary
+	  compatibility. Since all software available for Linux/MIPS is
+	  currently 32-bit you should say Y here.
+
+config COMPAT
+	bool
+	depends on MIPS32_COMPAT
+	default y
+
+config MIPS32_O32
+	bool "Kernel support for o32 binaries"
+	depends on MIPS32_COMPAT
+	help
+	  Select this option if you want to run o32 binaries.  These are pure
+	  32-bit binaries as used by the 32-bit Linux/MIPS port.  Most of
+	  existing binaries are in this format.
+
+	  If unsure, say Y.
+
+config MIPS32_N32
+	bool "Kernel support for n32 binaries"
+	depends on MIPS32_COMPAT
+	help
+	  Select this option if you want to run n32 binaries.  These are
+	  64-bit binaries using 32-bit quantities for addressing and certain
+	  data that would normally be 64-bit.  They are used in special
+	  cases.
+
+	  If unsure, say N.
+
+config BINFMT_ELF32
+	bool
+	default y if MIPS32_O32 || MIPS32_N32
+
+config PM
+	bool "Power Management support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && MACH_AU1X00
+
+endmenu
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/mips/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
+
+#
+# Use the generic interrupt handling code in kernel/irq/:
+#
+config GENERIC_HARDIRQS
+	bool
+	default y
+
+config GENERIC_IRQ_PROBE
+	bool
+	default y