Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 517 insertions, 0 deletions

diff --git a/arch/ppc/syslib/pci_auto.c b/arch/ppc/syslib/pci_auto.c
new file mode 100644
index 0000000..d64207c
--- /dev/null
+++ b/arch/ppc/syslib/pci_auto.c
@@ -0,0 +1,517 @@
+/*
+ * arch/ppc/syslib/pci_auto.c
+ *
+ * PCI autoconfiguration library
+ *
+ * Author: Matt Porter <mporter@mvista.com>
+ *
+ * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+/*
+ * The CardBus support is very preliminary.  Preallocating space is
+ * the way to go but will require some change in card services to
+ * make it useful.  Eventually this will ensure that we can put
+ * multiple CB bridges behind multiple P2P bridges.  For now, at
+ * least it ensures that we place the CB bridge BAR and assigned
+ * initial bus numbers.  I definitely need to do something about
+ * the lack of 16-bit I/O support. -MDP
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+
+#include <asm/pci-bridge.h>
+
+#define	PCIAUTO_IDE_MODE_MASK		0x05
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif /* DEBUG */
+
+static int pciauto_upper_iospc;
+static int pciauto_upper_memspc;
+
+void __init pciauto_setup_bars(struct pci_controller *hose,
+		int current_bus,
+		int pci_devfn,
+		int bar_limit)
+{
+	int bar_response, bar_size, bar_value;
+	int bar, addr_mask;
+	int * upper_limit;
+	int found_mem64 = 0;
+
+	DBG("PCI Autoconfig: Found Bus %d, Device %d, Function %d\n",
+		current_bus, PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn) );
+
+	for (bar = PCI_BASE_ADDRESS_0; bar <= bar_limit; bar+=4) {
+		/* Tickle the BAR and get the response */
+		early_write_config_dword(hose,
+				current_bus,
+				pci_devfn,
+				bar,
+				0xffffffff);
+		early_read_config_dword(hose,
+				current_bus,
+				pci_devfn,
+				bar,
+				&bar_response);
+
+		/* If BAR is not implemented go to the next BAR */
+		if (!bar_response)
+			continue;
+
+		/* Check the BAR type and set our address mask */
+		if (bar_response & PCI_BASE_ADDRESS_SPACE) {
+			addr_mask = PCI_BASE_ADDRESS_IO_MASK;
+			upper_limit = &pciauto_upper_iospc;
+			DBG("PCI Autoconfig: BAR 0x%x, I/O, ", bar);
+		} else {
+			if ( (bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
+			PCI_BASE_ADDRESS_MEM_TYPE_64)
+				found_mem64 = 1;
+
+			addr_mask = PCI_BASE_ADDRESS_MEM_MASK;	
+			upper_limit = &pciauto_upper_memspc;
+			DBG("PCI Autoconfig: BAR 0x%x, Mem ", bar);
+		}
+
+		/* Calculate requested size */
+		bar_size = ~(bar_response & addr_mask) + 1;
+
+		/* Allocate a base address */
+		bar_value = (*upper_limit - bar_size) & ~(bar_size - 1);
+
+		/* Write it out and update our limit */
+		early_write_config_dword(hose,
+				current_bus,
+				pci_devfn,
+				bar,
+				bar_value);
+
+		*upper_limit = bar_value;
+
+		/*
+		 * If we are a 64-bit decoder then increment to the
+		 * upper 32 bits of the bar and force it to locate
+		 * in the lower 4GB of memory.
+		 */
+		if (found_mem64) {
+			bar += 4;
+			early_write_config_dword(hose,
+					current_bus,
+					pci_devfn,
+					bar,
+					0x00000000);
+			found_mem64 = 0;
+		}
+
+		DBG("size=0x%x, address=0x%x\n",
+			bar_size, bar_value);
+	}
+
+}
+
+void __init pciauto_prescan_setup_bridge(struct pci_controller *hose,
+		int current_bus,
+		int pci_devfn,
+		int sub_bus,
+		int *iosave,
+		int *memsave)
+{
+	/* Configure bus number registers */
+	early_write_config_byte(hose,
+			current_bus,
+			pci_devfn,
+			PCI_PRIMARY_BUS,
+			current_bus);
+	early_write_config_byte(hose,
+			current_bus,
+			pci_devfn,
+			PCI_SECONDARY_BUS,
+			sub_bus + 1);
+	early_write_config_byte(hose,
+			current_bus,
+			pci_devfn,
+			PCI_SUBORDINATE_BUS,
+			0xff);
+
+	/* Round memory allocator to 1MB boundary */
+	pciauto_upper_memspc &= ~(0x100000 - 1);
+	*memsave = pciauto_upper_memspc;
+
+	/* Round I/O allocator to 4KB boundary */
+	pciauto_upper_iospc &= ~(0x1000 - 1);
+	*iosave = pciauto_upper_iospc;
+
+	/* Set up memory and I/O filter limits, assume 32-bit I/O space */
+	early_write_config_word(hose,
+			current_bus,
+			pci_devfn,
+			PCI_MEMORY_LIMIT,
+			((pciauto_upper_memspc - 1) & 0xfff00000) >> 16);
+	early_write_config_byte(hose,
+			current_bus,
+			pci_devfn,
+			PCI_IO_LIMIT,
+			((pciauto_upper_iospc - 1) & 0x0000f000) >> 8);
+	early_write_config_word(hose,
+			current_bus,
+			pci_devfn,
+			PCI_IO_LIMIT_UPPER16,
+			((pciauto_upper_iospc - 1) & 0xffff0000) >> 16);
+
+	/* Zero upper 32 bits of prefetchable base/limit */
+	early_write_config_dword(hose,
+			current_bus,
+			pci_devfn,
+			PCI_PREF_BASE_UPPER32,
+			0);
+	early_write_config_dword(hose,
+			current_bus,
+			pci_devfn,
+			PCI_PREF_LIMIT_UPPER32,
+			0);
+}
+
+void __init pciauto_postscan_setup_bridge(struct pci_controller *hose,
+		int current_bus,
+		int pci_devfn,
+		int sub_bus,
+		int *iosave,
+		int *memsave)
+{
+	int cmdstat;
+
+	/* Configure bus number registers */
+	early_write_config_byte(hose,
+			current_bus,
+			pci_devfn,
+			PCI_SUBORDINATE_BUS,
+			sub_bus);
+
+	/*
+	 * Round memory allocator to 1MB boundary.
+	 * If no space used, allocate minimum.
+	 */
+	pciauto_upper_memspc &= ~(0x100000 - 1);
+	if (*memsave == pciauto_upper_memspc)
+		pciauto_upper_memspc -= 0x00100000;
+
+	early_write_config_word(hose,
+			current_bus,
+			pci_devfn,
+			PCI_MEMORY_BASE,
+			pciauto_upper_memspc >> 16);
+
+	/* Allocate 1MB for pre-fretch */
+	early_write_config_word(hose,
+			current_bus,
+			pci_devfn,
+			PCI_PREF_MEMORY_LIMIT,
+			((pciauto_upper_memspc - 1) & 0xfff00000) >> 16);
+
+	pciauto_upper_memspc -= 0x100000;
+
+	early_write_config_word(hose,
+			current_bus,
+			pci_devfn,
+			PCI_PREF_MEMORY_BASE,
+			pciauto_upper_memspc >> 16);
+
+	/* Round I/O allocator to 4KB boundary */
+	pciauto_upper_iospc &= ~(0x1000 - 1);
+	if (*iosave == pciauto_upper_iospc)
+		pciauto_upper_iospc -= 0x1000;
+
+	early_write_config_byte(hose,
+			current_bus,
+			pci_devfn,
+			PCI_IO_BASE,
+			(pciauto_upper_iospc & 0x0000f000) >> 8);
+	early_write_config_word(hose,
+			current_bus,
+			pci_devfn,
+			PCI_IO_BASE_UPPER16,
+			pciauto_upper_iospc >> 16);
+
+	/* Enable memory and I/O accesses, enable bus master */
+	early_read_config_dword(hose,
+			current_bus,
+			pci_devfn,
+			PCI_COMMAND,
+			&cmdstat);
+	early_write_config_dword(hose,
+			current_bus,
+			pci_devfn,
+			PCI_COMMAND,
+			cmdstat |
+			PCI_COMMAND_IO |
+			PCI_COMMAND_MEMORY |
+			PCI_COMMAND_MASTER);
+}
+
+void __init pciauto_prescan_setup_cardbus_bridge(struct pci_controller *hose,
+		int current_bus,
+		int pci_devfn,
+		int sub_bus,
+		int *iosave,
+		int *memsave)
+{
+	/* Configure bus number registers */
+	early_write_config_byte(hose,
+			current_bus,
+			pci_devfn,
+			PCI_PRIMARY_BUS,
+			current_bus);
+	early_write_config_byte(hose,
+			current_bus,
+			pci_devfn,
+			PCI_SECONDARY_BUS,
+			sub_bus + 1);
+	early_write_config_byte(hose,
+			current_bus,
+			pci_devfn,
+			PCI_SUBORDINATE_BUS,
+			0xff);
+
+	/* Round memory allocator to 4KB boundary */
+	pciauto_upper_memspc &= ~(0x1000 - 1);
+	*memsave = pciauto_upper_memspc;
+
+	/* Round I/O allocator to 4 byte boundary */
+	pciauto_upper_iospc &= ~(0x4 - 1);
+	*iosave = pciauto_upper_iospc;
+
+	/* Set up memory and I/O filter limits, assume 32-bit I/O space */
+	early_write_config_dword(hose,
+			current_bus,
+			pci_devfn,
+			0x20,
+			pciauto_upper_memspc - 1);
+	early_write_config_dword(hose,
+			current_bus,
+			pci_devfn,
+			0x30,
+			pciauto_upper_iospc - 1);
+}
+
+void __init pciauto_postscan_setup_cardbus_bridge(struct pci_controller *hose,
+		int current_bus,
+		int pci_devfn,
+		int sub_bus,
+		int *iosave,
+		int *memsave)
+{
+	int cmdstat;
+
+	/*
+	 * Configure subordinate bus number.  The PCI subsystem
+	 * bus scan will renumber buses (reserving three additional
+	 * for this PCI<->CardBus bridge for the case where a CardBus
+	 * adapter contains a P2P or CB2CB bridge.
+	 */
+	early_write_config_byte(hose,
+			current_bus,
+			pci_devfn,
+			PCI_SUBORDINATE_BUS,
+			sub_bus);
+
+	/*
+	 * Reserve an additional 4MB for mem space and 16KB for
+	 * I/O space.  This should cover any additional space
+	 * requirement of unusual CardBus devices with
+	 * additional bridges that can consume more address space.
+	 *
+	 * Although pcmcia-cs currently will reprogram bridge
+	 * windows, the goal is to add an option to leave them
+	 * alone and use the bridge window ranges as the regions
+	 * that are searched for free resources upon hot-insertion
+	 * of a device.  This will allow a PCI<->CardBus bridge
+	 * configured by this routine to happily live behind a
+	 * P2P bridge in a system.
+	 */
+	pciauto_upper_memspc -= 0x00400000;
+	pciauto_upper_iospc -= 0x00004000;
+
+	/* Round memory allocator to 4KB boundary */
+	pciauto_upper_memspc &= ~(0x1000 - 1);
+
+	early_write_config_dword(hose,
+			current_bus,
+			pci_devfn,
+			0x1c,
+			pciauto_upper_memspc);
+
+	/* Round I/O allocator to 4 byte boundary */
+	pciauto_upper_iospc &= ~(0x4 - 1);
+	early_write_config_dword(hose,
+			current_bus,
+			pci_devfn,
+			0x2c,
+			pciauto_upper_iospc);
+
+	/* Enable memory and I/O accesses, enable bus master */
+	early_read_config_dword(hose,
+			current_bus,
+			pci_devfn,
+			PCI_COMMAND,
+			&cmdstat);
+	early_write_config_dword(hose,
+			current_bus,
+			pci_devfn,
+			PCI_COMMAND,
+			cmdstat |
+			PCI_COMMAND_IO |
+			PCI_COMMAND_MEMORY |
+			PCI_COMMAND_MASTER);
+}
+
+int __init pciauto_bus_scan(struct pci_controller *hose, int current_bus)
+{
+	int sub_bus, pci_devfn, pci_class, cmdstat, found_multi = 0;
+	unsigned short vid;
+	unsigned char header_type;
+
+	/*
+	 * Fetch our I/O and memory space upper boundaries used
+	 * to allocated base addresses on this hose.
+	 */
+	if (current_bus == hose->first_busno) {
+		pciauto_upper_iospc = hose->io_space.end + 1;
+		pciauto_upper_memspc = hose->mem_space.end + 1;
+	}
+
+	sub_bus = current_bus;
+
+	for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) {
+		/* Skip our host bridge */
+		if ( (current_bus == hose->first_busno) && (pci_devfn == 0) )
+			continue;
+
+		if (PCI_FUNC(pci_devfn) && !found_multi)
+			continue;
+
+		/* If config space read fails from this device, move on */
+		if (early_read_config_byte(hose,
+				current_bus,
+				pci_devfn,
+				PCI_HEADER_TYPE,
+				&header_type))
+			continue;
+
+		if (!PCI_FUNC(pci_devfn))
+			found_multi = header_type & 0x80;
+
+		early_read_config_word(hose,
+				current_bus,
+				pci_devfn,
+				PCI_VENDOR_ID,
+				&vid);
+
+		if (vid != 0xffff) {
+			early_read_config_dword(hose,
+					current_bus,
+					pci_devfn,
+					PCI_CLASS_REVISION, &pci_class);
+			if ( (pci_class >> 16) == PCI_CLASS_BRIDGE_PCI ) {
+				int iosave, memsave;
+
+				DBG("PCI Autoconfig: Found P2P bridge, device %d\n", PCI_SLOT(pci_devfn));
+				/* Allocate PCI I/O and/or memory space */
+				pciauto_setup_bars(hose,
+						current_bus,
+						pci_devfn,
+						PCI_BASE_ADDRESS_1);
+
+				pciauto_prescan_setup_bridge(hose,
+						current_bus,
+						pci_devfn,
+						sub_bus,
+						&iosave,
+						&memsave);
+				sub_bus = pciauto_bus_scan(hose, sub_bus+1);
+				pciauto_postscan_setup_bridge(hose,
+						current_bus,
+						pci_devfn,
+						sub_bus,
+						&iosave,
+						&memsave);
+			} else if ((pci_class >> 16) == PCI_CLASS_BRIDGE_CARDBUS) {
+				int iosave, memsave;
+
+				DBG("PCI Autoconfig: Found CardBus bridge, device %d function %d\n", PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn));
+				/* Place CardBus Socket/ExCA registers */
+				pciauto_setup_bars(hose,
+						current_bus,
+						pci_devfn,
+						PCI_BASE_ADDRESS_0);
+
+				pciauto_prescan_setup_cardbus_bridge(hose,
+						current_bus,
+						pci_devfn,
+						sub_bus,
+						&iosave,
+						&memsave);
+				sub_bus = pciauto_bus_scan(hose, sub_bus+1);
+				pciauto_postscan_setup_cardbus_bridge(hose,
+						current_bus,
+						pci_devfn,
+						sub_bus,
+						&iosave,
+						&memsave);
+			} else {
+				if ((pci_class >> 16) == PCI_CLASS_STORAGE_IDE) {
+					unsigned char prg_iface;
+
+					early_read_config_byte(hose,
+							current_bus,
+							pci_devfn,
+							PCI_CLASS_PROG,
+							&prg_iface);
+					if (!(prg_iface & PCIAUTO_IDE_MODE_MASK)) {
+						DBG("PCI Autoconfig: Skipping legacy mode IDE controller\n");
+						continue;
+					}
+				}
+				/* Allocate PCI I/O and/or memory space */
+				pciauto_setup_bars(hose,
+						current_bus,
+						pci_devfn,
+						PCI_BASE_ADDRESS_5);
+
+				/*
+				 * Enable some standard settings
+				 */
+				early_read_config_dword(hose,
+						current_bus,
+						pci_devfn,
+						PCI_COMMAND,
+						&cmdstat);
+				early_write_config_dword(hose,
+						current_bus,
+						pci_devfn,
+						PCI_COMMAND,
+						cmdstat |
+						PCI_COMMAND_IO |
+						PCI_COMMAND_MEMORY |
+						PCI_COMMAND_MASTER);
+				early_write_config_byte(hose,
+						current_bus,
+						pci_devfn,
+						PCI_LATENCY_TIMER,
+						0x80);
+			}
+		}
+	}
+	return sub_bus;
+}