x86: Move olpc to platform

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andres Salomon <dilinger@queued.net>

5 files changed, 537 insertions, 0 deletions

diff --git a/arch/x86/platform/Makefile b/arch/x86/platform/Makefile
index 8519b01..7bf70b8 100644
--- a/arch/x86/platform/Makefile
+++ b/arch/x86/platform/Makefile
@@ -1,6 +1,7 @@
 # Platform specific code goes here
 obj-y	+= efi/
 obj-y	+= mrst/
+obj-y	+= olpc/
 obj-y	+= scx200/
 obj-y	+= sfi/
 obj-y	+= visws/
diff --git a/arch/x86/platform/olpc/Makefile b/arch/x86/platform/olpc/Makefile
new file mode 100644
index 0000000..c31b8fc
--- /dev/null
+++ b/arch/x86/platform/olpc/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_OLPC)		+= olpc.o
+obj-$(CONFIG_OLPC_XO1)		+= olpc-xo1.o
+obj-$(CONFIG_OLPC_OPENFIRMWARE)	+= olpc_ofw.o
diff --git a/arch/x86/platform/olpc/olpc-xo1.c b/arch/x86/platform/olpc/olpc-xo1.c
new file mode 100644
index 0000000..f5442c0
--- /dev/null
+++ b/arch/x86/platform/olpc/olpc-xo1.c
@@ -0,0 +1,140 @@
+/*
+ * Support for features of the OLPC XO-1 laptop
+ *
+ * Copyright (C) 2010 One Laptop per Child
+ * Copyright (C) 2006 Red Hat, Inc.
+ * Copyright (C) 2006 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+
+#include <asm/io.h>
+#include <asm/olpc.h>
+
+#define DRV_NAME "olpc-xo1"
+
+#define PMS_BAR		4
+#define ACPI_BAR	5
+
+/* PMC registers (PMS block) */
+#define PM_SCLK		0x10
+#define PM_IN_SLPCTL	0x20
+#define PM_WKXD		0x34
+#define PM_WKD		0x30
+#define PM_SSC		0x54
+
+/* PM registers (ACPI block) */
+#define PM1_CNT		0x08
+#define PM_GPE0_STS	0x18
+
+static unsigned long acpi_base;
+static unsigned long pms_base;
+
+static void xo1_power_off(void)
+{
+	printk(KERN_INFO "OLPC XO-1 power off sequence...\n");
+
+	/* Enable all of these controls with 0 delay */
+	outl(0x40000000, pms_base + PM_SCLK);
+	outl(0x40000000, pms_base + PM_IN_SLPCTL);
+	outl(0x40000000, pms_base + PM_WKXD);
+	outl(0x40000000, pms_base + PM_WKD);
+
+	/* Clear status bits (possibly unnecessary) */
+	outl(0x0002ffff, pms_base  + PM_SSC);
+	outl(0xffffffff, acpi_base + PM_GPE0_STS);
+
+	/* Write SLP_EN bit to start the machinery */
+	outl(0x00002000, acpi_base + PM1_CNT);
+}
+
+/* Read the base addresses from the PCI BAR info */
+static int __devinit setup_bases(struct pci_dev *pdev)
+{
+	int r;
+
+	r = pci_enable_device_io(pdev);
+	if (r) {
+		dev_err(&pdev->dev, "can't enable device IO\n");
+		return r;
+	}
+
+	r = pci_request_region(pdev, ACPI_BAR, DRV_NAME);
+	if (r) {
+		dev_err(&pdev->dev, "can't alloc PCI BAR #%d\n", ACPI_BAR);
+		return r;
+	}
+
+	r = pci_request_region(pdev, PMS_BAR, DRV_NAME);
+	if (r) {
+		dev_err(&pdev->dev, "can't alloc PCI BAR #%d\n", PMS_BAR);
+		pci_release_region(pdev, ACPI_BAR);
+		return r;
+	}
+
+	acpi_base = pci_resource_start(pdev, ACPI_BAR);
+	pms_base = pci_resource_start(pdev, PMS_BAR);
+
+	return 0;
+}
+
+static int __devinit olpc_xo1_probe(struct platform_device *pdev)
+{
+	struct pci_dev *pcidev;
+	int r;
+
+	pcidev = pci_get_device(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA,
+				NULL);
+	if (!pdev)
+		return -ENODEV;
+
+	r = setup_bases(pcidev);
+	if (r)
+		return r;
+
+	pm_power_off = xo1_power_off;
+
+	printk(KERN_INFO "OLPC XO-1 support registered\n");
+	return 0;
+}
+
+static int __devexit olpc_xo1_remove(struct platform_device *pdev)
+{
+	pm_power_off = NULL;
+	return 0;
+}
+
+static struct platform_driver olpc_xo1_driver = {
+	.driver = {
+		.name = DRV_NAME,
+		.owner = THIS_MODULE,
+	},
+	.probe = olpc_xo1_probe,
+	.remove = __devexit_p(olpc_xo1_remove),
+};
+
+static int __init olpc_xo1_init(void)
+{
+	return platform_driver_register(&olpc_xo1_driver);
+}
+
+static void __exit olpc_xo1_exit(void)
+{
+	platform_driver_unregister(&olpc_xo1_driver);
+}
+
+MODULE_AUTHOR("Daniel Drake <dsd@laptop.org>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:olpc-xo1");
+
+module_init(olpc_xo1_init);
+module_exit(olpc_xo1_exit);
diff --git a/arch/x86/platform/olpc/olpc.c b/arch/x86/platform/olpc/olpc.c
new file mode 100644
index 0000000..edaf3fe
--- /dev/null
+++ b/arch/x86/platform/olpc/olpc.c
@@ -0,0 +1,281 @@
+/*
+ * Support for the OLPC DCON and OLPC EC access
+ *
+ * Copyright © 2006  Advanced Micro Devices, Inc.
+ * Copyright © 2007-2008  Andres Salomon <dilinger@debian.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <asm/geode.h>
+#include <asm/setup.h>
+#include <asm/olpc.h>
+#include <asm/olpc_ofw.h>
+
+struct olpc_platform_t olpc_platform_info;
+EXPORT_SYMBOL_GPL(olpc_platform_info);
+
+static DEFINE_SPINLOCK(ec_lock);
+
+/* what the timeout *should* be (in ms) */
+#define EC_BASE_TIMEOUT 20
+
+/* the timeout that bugs in the EC might force us to actually use */
+static int ec_timeout = EC_BASE_TIMEOUT;
+
+static int __init olpc_ec_timeout_set(char *str)
+{
+	if (get_option(&str, &ec_timeout) != 1) {
+		ec_timeout = EC_BASE_TIMEOUT;
+		printk(KERN_ERR "olpc-ec:  invalid argument to "
+				"'olpc_ec_timeout=', ignoring!\n");
+	}
+	printk(KERN_DEBUG "olpc-ec:  using %d ms delay for EC commands.\n",
+			ec_timeout);
+	return 1;
+}
+__setup("olpc_ec_timeout=", olpc_ec_timeout_set);
+
+/*
+ * These {i,o}bf_status functions return whether the buffers are full or not.
+ */
+
+static inline unsigned int ibf_status(unsigned int port)
+{
+	return !!(inb(port) & 0x02);
+}
+
+static inline unsigned int obf_status(unsigned int port)
+{
+	return inb(port) & 0x01;
+}
+
+#define wait_on_ibf(p, d) __wait_on_ibf(__LINE__, (p), (d))
+static int __wait_on_ibf(unsigned int line, unsigned int port, int desired)
+{
+	unsigned int timeo;
+	int state = ibf_status(port);
+
+	for (timeo = ec_timeout; state != desired && timeo; timeo--) {
+		mdelay(1);
+		state = ibf_status(port);
+	}
+
+	if ((state == desired) && (ec_timeout > EC_BASE_TIMEOUT) &&
+			timeo < (ec_timeout - EC_BASE_TIMEOUT)) {
+		printk(KERN_WARNING "olpc-ec:  %d: waited %u ms for IBF!\n",
+				line, ec_timeout - timeo);
+	}
+
+	return !(state == desired);
+}
+
+#define wait_on_obf(p, d) __wait_on_obf(__LINE__, (p), (d))
+static int __wait_on_obf(unsigned int line, unsigned int port, int desired)
+{
+	unsigned int timeo;
+	int state = obf_status(port);
+
+	for (timeo = ec_timeout; state != desired && timeo; timeo--) {
+		mdelay(1);
+		state = obf_status(port);
+	}
+
+	if ((state == desired) && (ec_timeout > EC_BASE_TIMEOUT) &&
+			timeo < (ec_timeout - EC_BASE_TIMEOUT)) {
+		printk(KERN_WARNING "olpc-ec:  %d: waited %u ms for OBF!\n",
+				line, ec_timeout - timeo);
+	}
+
+	return !(state == desired);
+}
+
+/*
+ * This allows the kernel to run Embedded Controller commands.  The EC is
+ * documented at <http://wiki.laptop.org/go/Embedded_controller>, and the
+ * available EC commands are here:
+ * <http://wiki.laptop.org/go/Ec_specification>.  Unfortunately, while
+ * OpenFirmware's source is available, the EC's is not.
+ */
+int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen,
+		unsigned char *outbuf,  size_t outlen)
+{
+	unsigned long flags;
+	int ret = -EIO;
+	int i;
+	int restarts = 0;
+
+	spin_lock_irqsave(&ec_lock, flags);
+
+	/* Clear OBF */
+	for (i = 0; i < 10 && (obf_status(0x6c) == 1); i++)
+		inb(0x68);
+	if (i == 10) {
+		printk(KERN_ERR "olpc-ec:  timeout while attempting to "
+				"clear OBF flag!\n");
+		goto err;
+	}
+
+	if (wait_on_ibf(0x6c, 0)) {
+		printk(KERN_ERR "olpc-ec:  timeout waiting for EC to "
+				"quiesce!\n");
+		goto err;
+	}
+
+restart:
+	/*
+	 * Note that if we time out during any IBF checks, that's a failure;
+	 * we have to return.  There's no way for the kernel to clear that.
+	 *
+	 * If we time out during an OBF check, we can restart the command;
+	 * reissuing it will clear the OBF flag, and we should be alright.
+	 * The OBF flag will sometimes misbehave due to what we believe
+	 * is a hardware quirk..
+	 */
+	pr_devel("olpc-ec:  running cmd 0x%x\n", cmd);
+	outb(cmd, 0x6c);
+
+	if (wait_on_ibf(0x6c, 0)) {
+		printk(KERN_ERR "olpc-ec:  timeout waiting for EC to read "
+				"command!\n");
+		goto err;
+	}
+
+	if (inbuf && inlen) {
+		/* write data to EC */
+		for (i = 0; i < inlen; i++) {
+			if (wait_on_ibf(0x6c, 0)) {
+				printk(KERN_ERR "olpc-ec:  timeout waiting for"
+						" EC accept data!\n");
+				goto err;
+			}
+			pr_devel("olpc-ec:  sending cmd arg 0x%x\n", inbuf[i]);
+			outb(inbuf[i], 0x68);
+		}
+	}
+	if (outbuf && outlen) {
+		/* read data from EC */
+		for (i = 0; i < outlen; i++) {
+			if (wait_on_obf(0x6c, 1)) {
+				printk(KERN_ERR "olpc-ec:  timeout waiting for"
+						" EC to provide data!\n");
+				if (restarts++ < 10)
+					goto restart;
+				goto err;
+			}
+			outbuf[i] = inb(0x68);
+			pr_devel("olpc-ec:  received 0x%x\n", outbuf[i]);
+		}
+	}
+
+	ret = 0;
+err:
+	spin_unlock_irqrestore(&ec_lock, flags);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(olpc_ec_cmd);
+
+static bool __init check_ofw_architecture(void)
+{
+	size_t propsize;
+	char olpc_arch[5];
+	const void *args[] = { NULL, "architecture", olpc_arch, (void *)5 };
+	void *res[] = { &propsize };
+
+	if (olpc_ofw("getprop", args, res)) {
+		printk(KERN_ERR "ofw: getprop call failed!\n");
+		return false;
+	}
+	return propsize == 5 && strncmp("OLPC", olpc_arch, 5) == 0;
+}
+
+static u32 __init get_board_revision(void)
+{
+	size_t propsize;
+	__be32 rev;
+	const void *args[] = { NULL, "board-revision-int", &rev, (void *)4 };
+	void *res[] = { &propsize };
+
+	if (olpc_ofw("getprop", args, res) || propsize != 4) {
+		printk(KERN_ERR "ofw: getprop call failed!\n");
+		return cpu_to_be32(0);
+	}
+	return be32_to_cpu(rev);
+}
+
+static bool __init platform_detect(void)
+{
+	if (!check_ofw_architecture())
+		return false;
+	olpc_platform_info.flags |= OLPC_F_PRESENT;
+	olpc_platform_info.boardrev = get_board_revision();
+	return true;
+}
+
+static int __init add_xo1_platform_devices(void)
+{
+	struct platform_device *pdev;
+
+	pdev = platform_device_register_simple("xo1-rfkill", -1, NULL, 0);
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
+
+	pdev = platform_device_register_simple("olpc-xo1", -1, NULL, 0);
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
+
+	return 0;
+}
+
+static int __init olpc_init(void)
+{
+	int r = 0;
+
+	if (!olpc_ofw_present() || !platform_detect())
+		return 0;
+
+	spin_lock_init(&ec_lock);
+
+	/* assume B1 and above models always have a DCON */
+	if (olpc_board_at_least(olpc_board(0xb1)))
+		olpc_platform_info.flags |= OLPC_F_DCON;
+
+	/* get the EC revision */
+	olpc_ec_cmd(EC_FIRMWARE_REV, NULL, 0,
+			(unsigned char *) &olpc_platform_info.ecver, 1);
+
+#ifdef CONFIG_PCI_OLPC
+	/* If the VSA exists let it emulate PCI, if not emulate in kernel.
+	 * XO-1 only. */
+	if (olpc_platform_info.boardrev < olpc_board_pre(0xd0) &&
+			!cs5535_has_vsa2())
+		x86_init.pci.arch_init = pci_olpc_init;
+#endif
+
+	printk(KERN_INFO "OLPC board revision %s%X (EC=%x)\n",
+			((olpc_platform_info.boardrev & 0xf) < 8) ? "pre" : "",
+			olpc_platform_info.boardrev >> 4,
+			olpc_platform_info.ecver);
+
+	if (olpc_platform_info.boardrev < olpc_board_pre(0xd0)) { /* XO-1 */
+		r = add_xo1_platform_devices();
+		if (r)
+			return r;
+	}
+
+	return 0;
+}
+
+postcore_initcall(olpc_init);
diff --git a/arch/x86/platform/olpc/olpc_ofw.c b/arch/x86/platform/olpc/olpc_ofw.c
new file mode 100644
index 0000000..7873204
--- /dev/null
+++ b/arch/x86/platform/olpc/olpc_ofw.c
@@ -0,0 +1,112 @@
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/olpc_ofw.h>
+
+/* address of OFW callback interface; will be NULL if OFW isn't found */
+static int (*olpc_ofw_cif)(int *);
+
+/* page dir entry containing OFW's pgdir table; filled in by head_32.S */
+u32 olpc_ofw_pgd __initdata;
+
+static DEFINE_SPINLOCK(ofw_lock);
+
+#define MAXARGS 10
+
+void __init setup_olpc_ofw_pgd(void)
+{
+	pgd_t *base, *ofw_pde;
+
+	if (!olpc_ofw_cif)
+		return;
+
+	/* fetch OFW's PDE */
+	base = early_ioremap(olpc_ofw_pgd, sizeof(olpc_ofw_pgd) * PTRS_PER_PGD);
+	if (!base) {
+		printk(KERN_ERR "failed to remap OFW's pgd - disabling OFW!\n");
+		olpc_ofw_cif = NULL;
+		return;
+	}
+	ofw_pde = &base[OLPC_OFW_PDE_NR];
+
+	/* install OFW's PDE permanently into the kernel's pgtable */
+	set_pgd(&swapper_pg_dir[OLPC_OFW_PDE_NR], *ofw_pde);
+	/* implicit optimization barrier here due to uninline function return */
+
+	early_iounmap(base, sizeof(olpc_ofw_pgd) * PTRS_PER_PGD);
+}
+
+int __olpc_ofw(const char *name, int nr_args, const void **args, int nr_res,
+		void **res)
+{
+	int ofw_args[MAXARGS + 3];
+	unsigned long flags;
+	int ret, i, *p;
+
+	BUG_ON(nr_args + nr_res > MAXARGS);
+
+	if (!olpc_ofw_cif)
+		return -EIO;
+
+	ofw_args[0] = (int)name;
+	ofw_args[1] = nr_args;
+	ofw_args[2] = nr_res;
+
+	p = &ofw_args[3];
+	for (i = 0; i < nr_args; i++, p++)
+		*p = (int)args[i];
+
+	/* call into ofw */
+	spin_lock_irqsave(&ofw_lock, flags);
+	ret = olpc_ofw_cif(ofw_args);
+	spin_unlock_irqrestore(&ofw_lock, flags);
+
+	if (!ret) {
+		for (i = 0; i < nr_res; i++, p++)
+			*((int *)res[i]) = *p;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(__olpc_ofw);
+
+bool olpc_ofw_present(void)
+{
+	return olpc_ofw_cif != NULL;
+}
+EXPORT_SYMBOL_GPL(olpc_ofw_present);
+
+/* OFW cif _should_ be above this address */
+#define OFW_MIN 0xff000000
+
+/* OFW starts on a 1MB boundary */
+#define OFW_BOUND (1<<20)
+
+void __init olpc_ofw_detect(void)
+{
+	struct olpc_ofw_header *hdr = &boot_params.olpc_ofw_header;
+	unsigned long start;
+
+	/* ensure OFW booted us by checking for "OFW " string */
+	if (hdr->ofw_magic != OLPC_OFW_SIG)
+		return;
+
+	olpc_ofw_cif = (int (*)(int *))hdr->cif_handler;
+
+	if ((unsigned long)olpc_ofw_cif < OFW_MIN) {
+		printk(KERN_ERR "OFW detected, but cif has invalid address 0x%lx - disabling.\n",
+				(unsigned long)olpc_ofw_cif);
+		olpc_ofw_cif = NULL;
+		return;
+	}
+
+	/* determine where OFW starts in memory */
+	start = round_down((unsigned long)olpc_ofw_cif, OFW_BOUND);
+	printk(KERN_INFO "OFW detected in memory, cif @ 0x%lx (reserving top %ldMB)\n",
+			(unsigned long)olpc_ofw_cif, (-start) >> 20);
+	reserve_top_address(-start);
+}