diff options
| author | André Goddard Rosa <andre.goddard@gmail.com> | 2009-11-14 13:09:05 -0200 |
|---|---|---|
| committer | Jiri Kosina <jkosina@suse.cz> | 2009-12-04 15:39:55 +0100 |
| commit | af901ca181d92aac3a7dc265144a9081a86d8f39 (patch) | |
| tree | 380054af22521144fbe1364c3bcd55ad24c9bde4 /arch | |
| parent | 972b94ffb90ea6d20c589d9a47215df103388ddd (diff) | |
| download | kernel_samsung_crespo-af901ca181d92aac3a7dc265144a9081a86d8f39.zip kernel_samsung_crespo-af901ca181d92aac3a7dc265144a9081a86d8f39.tar.gz kernel_samsung_crespo-af901ca181d92aac3a7dc265144a9081a86d8f39.tar.bz2 | |
tree-wide: fix assorted typos all over the place
That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.
Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Diffstat (limited to 'arch')
66 files changed, 104 insertions, 104 deletions
diff --git a/arch/alpha/mm/numa.c b/arch/alpha/mm/numa.c index 10b4035..7b2c56d 100644 --- a/arch/alpha/mm/numa.c +++ b/arch/alpha/mm/numa.c @@ -197,7 +197,7 @@ setup_memory_node(int nid, void *kernel_end) } if (bootmap_start == -1) - panic("couldn't find a contigous place for the bootmap"); + panic("couldn't find a contiguous place for the bootmap"); /* Allocate the bootmap and mark the whole MM as reserved. */ bootmap_size = init_bootmem_node(NODE_DATA(nid), bootmap_start, diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index 7713a08..37bda5f 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -82,7 +82,7 @@ static int scoop_gpio_get(struct gpio_chip *chip, unsigned offset) { struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio); - /* XXX: I'm usure, but it seems so */ + /* XXX: I'm unsure, but it seems so */ return ioread16(sdev->base + SCOOP_GPRR) & (1 << (offset + 1)); } diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h index 375066a..cbf334d 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h +++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h @@ -83,7 +83,7 @@ typedef struct { * @brief Get next available transaction width * * -* @return On sucess : Next avail able transaction width +* @return On success : Next available transaction width * On failure : dmacHw_TRANSACTION_WIDTH_8 * * @note diff --git a/arch/arm/mach-bcmring/include/mach/dma.h b/arch/arm/mach-bcmring/include/mach/dma.h index 847980c..1f2c531 100644 --- a/arch/arm/mach-bcmring/include/mach/dma.h +++ b/arch/arm/mach-bcmring/include/mach/dma.h @@ -651,7 +651,7 @@ int dma_map_add_region(DMA_MemMap_t *memMap, /* Stores state information about t /** * Creates a descriptor ring from a memory mapping. * -* @return 0 on sucess, error code otherwise. +* @return 0 on success, error code otherwise. */ /****************************************************************************/ diff --git a/arch/arm/mach-lh7a40x/include/mach/hardware.h b/arch/arm/mach-lh7a40x/include/mach/hardware.h index 48e827d..59d2ace 100644 --- a/arch/arm/mach-lh7a40x/include/mach/hardware.h +++ b/arch/arm/mach-lh7a40x/include/mach/hardware.h @@ -31,7 +31,7 @@ /* * This __REG() version gives the same results as the one above, except * that we are fooling gcc somehow so it generates far better and smaller - * assembly code for access to contigous registers. It's a shame that gcc + * assembly code for access to contiguous registers. It's a shame that gcc * doesn't guess this by itself. */ #include <asm/types.h> diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index 36dc541..bdf96eb 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -463,7 +463,7 @@ static void __init orion5x_setup_pci_wins(struct mbus_dram_target_info *dram) writel(win_enable, PCI_BAR_ENABLE); /* - * Disable automatic update of address remaping when writing to BARs. + * Disable automatic update of address remapping when writing to BARs. */ orion5x_setbits(PCI_ADDR_DECODE_CTRL, 1); } diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h index 8721b80..ae536e8 100644 --- a/arch/arm/mach-pxa/include/mach/palmld.h +++ b/arch/arm/mach-pxa/include/mach/palmld.h @@ -91,7 +91,7 @@ /* BATTERY */ #define PALMLD_BAT_MAX_VOLTAGE 4000 /* 4.00V maximum voltage */ #define PALMLD_BAT_MIN_VOLTAGE 3550 /* 3.55V critical voltage */ -#define PALMLD_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMLD_BAT_MAX_CURRENT 0 /* unknown */ #define PALMLD_BAT_MIN_CURRENT 0 /* unknown */ #define PALMLD_BAT_MAX_CHARGE 1 /* unknown */ #define PALMLD_BAT_MIN_CHARGE 1 /* unknown */ diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h index d15662a..6baf746 100644 --- a/arch/arm/mach-pxa/include/mach/palmt5.h +++ b/arch/arm/mach-pxa/include/mach/palmt5.h @@ -66,7 +66,7 @@ /* BATTERY */ #define PALMT5_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */ #define PALMT5_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */ -#define PALMT5_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMT5_BAT_MAX_CURRENT 0 /* unknown */ #define PALMT5_BAT_MIN_CURRENT 0 /* unknown */ #define PALMT5_BAT_MAX_CHARGE 1 /* unknown */ #define PALMT5_BAT_MIN_CHARGE 1 /* unknown */ diff --git a/arch/arm/mach-pxa/include/mach/palmtc.h b/arch/arm/mach-pxa/include/mach/palmtc.h index 3dc9b07..3f9dd3f 100644 --- a/arch/arm/mach-pxa/include/mach/palmtc.h +++ b/arch/arm/mach-pxa/include/mach/palmtc.h @@ -68,7 +68,7 @@ /* BATTERY */ #define PALMTC_BAT_MAX_VOLTAGE 4000 /* 4.00V maximum voltage */ #define PALMTC_BAT_MIN_VOLTAGE 3550 /* 3.55V critical voltage */ -#define PALMTC_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMTC_BAT_MAX_CURRENT 0 /* unknown */ #define PALMTC_BAT_MIN_CURRENT 0 /* unknown */ #define PALMTC_BAT_MAX_CHARGE 1 /* unknown */ #define PALMTC_BAT_MIN_CHARGE 1 /* unknown */ diff --git a/arch/arm/mach-pxa/include/mach/palmte2.h b/arch/arm/mach-pxa/include/mach/palmte2.h index 1236134..f89e989 100644 --- a/arch/arm/mach-pxa/include/mach/palmte2.h +++ b/arch/arm/mach-pxa/include/mach/palmte2.h @@ -59,7 +59,7 @@ /* BATTERY */ #define PALMTE2_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */ #define PALMTE2_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */ -#define PALMTE2_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMTE2_BAT_MAX_CURRENT 0 /* unknown */ #define PALMTE2_BAT_MIN_CURRENT 0 /* unknown */ #define PALMTE2_BAT_MAX_CHARGE 1 /* unknown */ #define PALMTE2_BAT_MIN_CHARGE 1 /* unknown */ diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h index 1be0db6..10abc4f 100644 --- a/arch/arm/mach-pxa/include/mach/palmtx.h +++ b/arch/arm/mach-pxa/include/mach/palmtx.h @@ -94,7 +94,7 @@ /* BATTERY */ #define PALMTX_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */ #define PALMTX_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */ -#define PALMTX_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMTX_BAT_MAX_CURRENT 0 /* unknown */ #define PALMTX_BAT_MIN_CURRENT 0 /* unknown */ #define PALMTX_BAT_MAX_CHARGE 1 /* unknown */ #define PALMTX_BAT_MIN_CHARGE 1 /* unknown */ diff --git a/arch/arm/mach-pxa/include/mach/palmz72.h b/arch/arm/mach-pxa/include/mach/palmz72.h index 2806ef6..2bbcf70 100644 --- a/arch/arm/mach-pxa/include/mach/palmz72.h +++ b/arch/arm/mach-pxa/include/mach/palmz72.h @@ -49,7 +49,7 @@ /* Battery */ #define PALMZ72_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */ #define PALMZ72_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */ -#define PALMZ72_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMZ72_BAT_MAX_CURRENT 0 /* unknown */ #define PALMZ72_BAT_MIN_CURRENT 0 /* unknown */ #define PALMZ72_BAT_MAX_CHARGE 1 /* unknown */ #define PALMZ72_BAT_MIN_CHARGE 1 /* unknown */ diff --git a/arch/arm/mach-s3c6400/setup-sdhci.c b/arch/arm/mach-s3c6400/setup-sdhci.c index b93dafb..1039937 100644 --- a/arch/arm/mach-s3c6400/setup-sdhci.c +++ b/arch/arm/mach-s3c6400/setup-sdhci.c @@ -30,7 +30,7 @@ char *s3c6400_hsmmc_clksrcs[4] = { [0] = "hsmmc", [1] = "hsmmc", [2] = "mmc_bus", - /* [3] = "48m", - note not succesfully used yet */ + /* [3] = "48m", - note not successfully used yet */ }; void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev, diff --git a/arch/arm/mach-s3c6410/setup-sdhci.c b/arch/arm/mach-s3c6410/setup-sdhci.c index 20666f3..816d2d9 100644 --- a/arch/arm/mach-s3c6410/setup-sdhci.c +++ b/arch/arm/mach-s3c6410/setup-sdhci.c @@ -30,7 +30,7 @@ char *s3c6410_hsmmc_clksrcs[4] = { [0] = "hsmmc", [1] = "hsmmc", [2] = "mmc_bus", - /* [3] = "48m", - note not succesfully used yet */ + /* [3] = "48m", - note not successfully used yet */ }; diff --git a/arch/arm/mach-sa1100/dma.c b/arch/arm/mach-sa1100/dma.c index cb4521a..ad66035 100644 --- a/arch/arm/mach-sa1100/dma.c +++ b/arch/arm/mach-sa1100/dma.c @@ -65,7 +65,7 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id) /** - * sa1100_request_dma - allocate one of the SA11x0's DMA chanels + * sa1100_request_dma - allocate one of the SA11x0's DMA channels * @device: The SA11x0 peripheral targeted by this request * @device_id: An ascii name for the claiming device * @callback: Function to be called when the DMA completes diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h index 446f867..0c7802b 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h @@ -112,7 +112,7 @@ enum iomux_gp_func { * setups a single pin: * - reserves the pin so that it is not claimed by another driver * - setups the iomux according to the configuration - * - if the pin is configured as a GPIO, we claim it throug kernel gpiolib + * - if the pin is configured as a GPIO, we claim it through kernel gpiolib */ int mxc_iomux_alloc_pin(const unsigned int pin, const char *label); /* diff --git a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h index 9f13061..3887f3f 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h @@ -48,7 +48,7 @@ * setups a single pin: * - reserves the pin so that it is not claimed by another driver * - setups the iomux according to the configuration - * - if the pin is configured as a GPIO, we claim it throug kernel gpiolib + * - if the pin is configured as a GPIO, we claim it through kernel gpiolib */ int mxc_iomux_alloc_pin(const unsigned int pin_mode, const char *label); /* diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c index 5cdbd60..4ff6dfe 100644 --- a/arch/arm/plat-mxc/pwm.c +++ b/arch/arm/plat-mxc/pwm.c @@ -94,7 +94,7 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) * register to follow the ratio of duty_ns vs. period_ns * accordingly. * - * This is good enought for programming the brightness of + * This is good enough for programming the brightness of * the LCD backlight. * * The real implementation would divide PERCLK[0] first by diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index b53125f..0e30891 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -1232,7 +1232,7 @@ static void create_dma_lch_chain(int lch_head, int lch_queue) * OMAP_DMA_DYNAMIC_CHAIN * @params - Channel parameters * - * @return - Succes : 0 + * @return - Success : 0 * Failure: -EINVAL/-ENOMEM */ int omap_request_dma_chain(int dev_id, const char *dev_name, diff --git a/arch/arm/plat-omap/include/mach/omap16xx.h b/arch/arm/plat-omap/include/mach/omap16xx.h index 0e69b50..7560b4d 100644 --- a/arch/arm/plat-omap/include/mach/omap16xx.h +++ b/arch/arm/plat-omap/include/mach/omap16xx.h @@ -124,7 +124,7 @@ #define TIPB_SWITCH_BASE (0xfffbc800) #define OMAP16XX_MMCSD2_SSW_MPU_CONF (TIPB_SWITCH_BASE + 0x160) -/* UART3 Registers Maping through MPU bus */ +/* UART3 Registers Mapping through MPU bus */ #define UART3_RHR (OMAP_UART3_BASE + 0) #define UART3_THR (OMAP_UART3_BASE + 0) #define UART3_DLL (OMAP_UART3_BASE + 0) diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h index c4d1334..bd534d3 100644 --- a/arch/arm/plat-s3c24xx/include/plat/map.h +++ b/arch/arm/plat-s3c24xx/include/plat/map.h @@ -64,7 +64,7 @@ /* the calculation for the VA of this must ensure that * it is the same distance apart from the UART in the * phsyical address space, as the initial mapping for the IO - * is done as a 1:1 maping. This puts it (currently) at + * is done as a 1:1 mapping. This puts it (currently) at * 0xFA800000, which is not in the way of any current mapping * by the base system. */ diff --git a/arch/avr32/boards/hammerhead/Kconfig b/arch/avr32/boards/hammerhead/Kconfig index fda2331..5c13d78 100644 --- a/arch/avr32/boards/hammerhead/Kconfig +++ b/arch/avr32/boards/hammerhead/Kconfig @@ -24,7 +24,7 @@ config BOARD_HAMMERHEAD_SND bool "Atmel AC97 Sound support" help This enables Sound support for the Hammerhead board. You may - also go trough the ALSA settings to get it working. + also go through the ALSA settings to get it working. Choose 'Y' here if you have ordered a Corona daugther board and want to make your board funky. diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 6b7325d..78cb3d3 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -619,7 +619,7 @@ asmlinkage notrace void trap_c(struct pt_regs *fp) /* * Similar to get_user, do some address checking, then dereference - * Return true on sucess, false on bad address + * Return true on success, false on bad address */ static bool get_instruction(unsigned short *val, unsigned short *address) { diff --git a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h index e06f411..f9fd2b2 100644 --- a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h +++ b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h @@ -542,7 +542,7 @@ #define HMDMA0_CONTROL 0xFFC03300 /* Handshake MDMA0 Control Register */ #define HMDMA0_ECINIT 0xFFC03304 /* HMDMA0 Initial Edge Count Register */ #define HMDMA0_BCINIT 0xFFC03308 /* HMDMA0 Initial Block Count Register */ -#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshhold Register */ +#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshold Register */ #define HMDMA0_ECOVERFLOW 0xFFC03310 /* HMDMA0 Edge Count Overflow Interrupt Register */ #define HMDMA0_ECOUNT 0xFFC03314 /* HMDMA0 Current Edge Count Register */ #define HMDMA0_BCOUNT 0xFFC03318 /* HMDMA0 Current Block Count Register */ @@ -550,7 +550,7 @@ #define HMDMA1_CONTROL 0xFFC03340 /* Handshake MDMA1 Control Register */ #define HMDMA1_ECINIT 0xFFC03344 /* HMDMA1 Initial Edge Count Register */ #define HMDMA1_BCINIT 0xFFC03348 /* HMDMA1 Initial Block Count Register */ -#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshhold Register */ +#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshold Register */ #define HMDMA1_ECOVERFLOW 0xFFC03350 /* HMDMA1 Edge Count Overflow Interrupt Register */ #define HMDMA1_ECOUNT 0xFFC03354 /* HMDMA1 Current Edge Count Register */ #define HMDMA1_BCOUNT 0xFFC03358 /* HMDMA1 Current Block Count Register */ diff --git a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h index f821700..b9dbb73 100644 --- a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h +++ b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h @@ -544,7 +544,7 @@ #define HMDMA0_CONTROL 0xFFC03300 /* Handshake MDMA0 Control Register */ #define HMDMA0_ECINIT 0xFFC03304 /* HMDMA0 Initial Edge Count Register */ #define HMDMA0_BCINIT 0xFFC03308 /* HMDMA0 Initial Block Count Register */ -#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshhold Register */ +#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshold Register */ #define HMDMA0_ECOVERFLOW 0xFFC03310 /* HMDMA0 Edge Count Overflow Interrupt Register */ #define HMDMA0_ECOUNT 0xFFC03314 /* HMDMA0 Current Edge Count Register */ #define HMDMA0_BCOUNT 0xFFC03318 /* HMDMA0 Current Block Count Register */ @@ -552,7 +552,7 @@ #define HMDMA1_CONTROL 0xFFC03340 /* Handshake MDMA1 Control Register */ #define HMDMA1_ECINIT 0xFFC03344 /* HMDMA1 Initial Edge Count Register */ #define HMDMA1_BCINIT 0xFFC03348 /* HMDMA1 Initial Block Count Register */ -#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshhold Register */ +#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshold Register */ #define HMDMA1_ECOVERFLOW 0xFFC03350 /* HMDMA1 Edge Count Overflow Interrupt Register */ #define HMDMA1_ECOUNT 0xFFC03354 /* HMDMA1 Current Edge Count Register */ #define HMDMA1_BCOUNT 0xFFC03358 /* HMDMA1 Current Block Count Register */ diff --git a/arch/blackfin/mach-bf537/include/mach/defBF534.h b/arch/blackfin/mach-bf537/include/mach/defBF534.h index cebb14f..a6d20ca 100644 --- a/arch/blackfin/mach-bf537/include/mach/defBF534.h +++ b/arch/blackfin/mach-bf537/include/mach/defBF534.h @@ -934,7 +934,7 @@ #define HMDMA0_CONTROL 0xFFC03300 /* Handshake MDMA0 Control Register */ #define HMDMA0_ECINIT 0xFFC03304 /* HMDMA0 Initial Edge Count Register */ #define HMDMA0_BCINIT 0xFFC03308 /* HMDMA0 Initial Block Count Register */ -#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshhold Register */ +#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshold Register */ #define HMDMA0_ECOVERFLOW 0xFFC03310 /* HMDMA0 Edge Count Overflow Interrupt Register */ #define HMDMA0_ECOUNT 0xFFC03314 /* HMDMA0 Current Edge Count Register */ #define HMDMA0_BCOUNT 0xFFC03318 /* HMDMA0 Current Block Count Register */ @@ -942,7 +942,7 @@ #define HMDMA1_CONTROL 0xFFC03340 /* Handshake MDMA1 Control Register */ #define HMDMA1_ECINIT 0xFFC03344 /* HMDMA1 Initial Edge Count Register */ #define HMDMA1_BCINIT 0xFFC03348 /* HMDMA1 Initial Block Count Register */ -#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshhold Register */ +#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshold Register */ #define HMDMA1_ECOVERFLOW 0xFFC03350 /* HMDMA1 Edge Count Overflow Interrupt Register */ #define HMDMA1_ECOUNT 0xFFC03354 /* HMDMA1 Current Edge Count Register */ #define HMDMA1_BCOUNT 0xFFC03358 /* HMDMA1 Current Block Count Register */ diff --git a/arch/blackfin/mach-bf548/include/mach/defBF544.h b/arch/blackfin/mach-bf548/include/mach/defBF544.h index dd414ae..39f588d 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF544.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF544.h @@ -491,7 +491,7 @@ #define HMDMA0_CONTROL 0xffc04500 /* Handshake MDMA0 Control Register */ #define HMDMA0_ECINIT 0xffc04504 /* Handshake MDMA0 Initial Edge Count Register */ #define HMDMA0_BCINIT 0xffc04508 /* Handshake MDMA0 Initial Block Count Register */ -#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshhold Register */ +#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshold Register */ #define HMDMA0_ECOVERFLOW 0xffc04510 /* Handshake MDMA0 Edge Count Overflow Interrupt Register */ #define HMDMA0_ECOUNT 0xffc04514 /* Handshake MDMA0 Current Edge Count Register */ #define HMDMA0_BCOUNT 0xffc04518 /* Handshake MDMA0 Current Block Count Register */ @@ -501,7 +501,7 @@ #define HMDMA1_CONTROL 0xffc04540 /* Handshake MDMA1 Control Register */ #define HMDMA1_ECINIT 0xffc04544 /* Handshake MDMA1 Initial Edge Count Register */ #define HMDMA1_BCINIT 0xffc04548 /* Handshake MDMA1 Initial Block Count Register */ -#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshhold Register */ +#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshold Register */ #define HMDMA1_ECOVERFLOW 0xffc04550 /* Handshake MDMA1 Edge Count Overflow Interrupt Register */ #define HMDMA1_ECOUNT 0xffc04554 /* Handshake MDMA1 Current Edge Count Register */ #define HMDMA1_BCOUNT 0xffc04558 /* Handshake MDMA1 Current Block Count Register */ diff --git a/arch/blackfin/mach-bf548/include/mach/defBF547.h b/arch/blackfin/mach-bf548/include/mach/defBF547.h index 5a9dbab..c4dcf30 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF547.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF547.h @@ -470,7 +470,7 @@ #define HMDMA0_CONTROL 0xffc04500 /* Handshake MDMA0 Control Register */ #define HMDMA0_ECINIT 0xffc04504 /* Handshake MDMA0 Initial Edge Count Register */ #define HMDMA0_BCINIT 0xffc04508 /* Handshake MDMA0 Initial Block Count Register */ -#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshhold Register */ +#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshold Register */ #define HMDMA0_ECOVERFLOW 0xffc04510 /* Handshake MDMA0 Edge Count Overflow Interrupt Register */ #define HMDMA0_ECOUNT 0xffc04514 /* Handshake MDMA0 Current Edge Count Register */ #define HMDMA0_BCOUNT 0xffc04518 /* Handshake MDMA0 Current Block Count Register */ @@ -480,7 +480,7 @@ #define HMDMA1_CONTROL 0xffc04540 /* Handshake MDMA1 Control Register */ #define HMDMA1_ECINIT 0xffc04544 /* Handshake MDMA1 Initial Edge Count Register */ #define HMDMA1_BCINIT 0xffc04548 /* Handshake MDMA1 Initial Block Count Register */ -#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshhold Register */ +#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshold Register */ #define HMDMA1_ECOVERFLOW 0xffc04550 /* Handshake MDMA1 Edge Count Overflow Interrupt Register */ #define HMDMA1_ECOUNT 0xffc04554 /* Handshake MDMA1 Current Edge Count Register */ #define HMDMA1_BCOUNT 0xffc04558 /* Handshake MDMA1 Current Block Count Register */ diff --git a/arch/blackfin/mach-bf548/include/mach/defBF548.h b/arch/blackfin/mach-bf548/include/mach/defBF548.h index 82cd593..a507998 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF548.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF548.h @@ -853,7 +853,7 @@ #define HMDMA0_CONTROL 0xffc04500 /* Handshake MDMA0 Control Register */ #define HMDMA0_ECINIT 0xffc04504 /* Handshake MDMA0 Initial Edge Count Register */ #define HMDMA0_BCINIT 0xffc04508 /* Handshake MDMA0 Initial Block Count Register */ -#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshhold Register */ +#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshold Register */ #define HMDMA0_ECOVERFLOW 0xffc04510 /* Handshake MDMA0 Edge Count Overflow Interrupt Register */ #define HMDMA0_ECOUNT 0xffc04514 /* Handshake MDMA0 Current Edge Count Register */ #define HMDMA0_BCOUNT 0xffc04518 /* Handshake MDMA0 Current Block Count Register */ @@ -863,7 +863,7 @@ #define HMDMA1_CONTROL 0xffc04540 /* Handshake MDMA1 Control Register */ #define HMDMA1_ECINIT 0xffc04544 /* Handshake MDMA1 Initial Edge Count Register */ #define HMDMA1_BCINIT 0xffc04548 /* Handshake MDMA1 Initial Block Count Register */ -#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshhold Register */ +#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshold Register */ #define HMDMA1_ECOVERFLOW 0xffc04550 /* Handshake MDMA1 Edge Count Overflow Interrupt Register */ #define HMDMA1_ECOUNT 0xffc04554 /* Handshake MDMA1 Current Edge Count Register */ #define HMDMA1_BCOUNT 0xffc04558 /* Handshake MDMA1 Current Block Count Register */ diff --git a/arch/blackfin/mach-bf548/include/mach/defBF549.h b/arch/blackfin/mach-bf548/include/mach/defBF549.h index 6fc6e39..f7f0435 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF549.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF549.h @@ -1024,7 +1024,7 @@ #define HMDMA0_CONTROL 0xffc04500 /* Handshake MDMA0 Control Register */ #define HMDMA0_ECINIT 0xffc04504 /* Handshake MDMA0 Initial Edge Count Register */ #define HMDMA0_BCINIT 0xffc04508 /* Handshake MDMA0 Initial Block Count Register */ -#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshhold Register */ +#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshold Register */ #define HMDMA0_ECOVERFLOW 0xffc04510 /* Handshake MDMA0 Edge Count Overflow Interrupt Register */ #define HMDMA0_ECOUNT 0xffc04514 /* Handshake MDMA0 Current Edge Count Register */ #define HMDMA0_BCOUNT 0xffc04518 /* Handshake MDMA0 Current Block Count Register */ @@ -1034,7 +1034,7 @@ #define HMDMA1_CONTROL 0xffc04540 /* Handshake MDMA1 Control Register */ #define HMDMA1_ECINIT 0xffc04544 /* Handshake MDMA1 Initial Edge Count Register */ #define HMDMA1_BCINIT 0xffc04548 /* Handshake MDMA1 Initial Block Count Register */ -#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshhold Register */ +#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshold Register */ #define HMDMA1_ECOVERFLOW 0xffc04550 /* Handshake MDMA1 Edge Count Overflow Interrupt Register */ #define HMDMA1_ECOUNT 0xffc04554 /* Handshake MDMA1 Current Edge Count Register */ #define HMDMA1_BCOUNT 0xffc04558 /* Handshake MDMA1 Current Block Count Register */ diff --git a/arch/cris/mm/fault.c b/arch/cris/mm/fault.c index 4a7cdd9..380df1a 100644 --- a/arch/cris/mm/fault.c +++ b/arch/cris/mm/fault.c @@ -209,7 +209,7 @@ do_page_fault(unsigned long address, struct pt_regs *regs, /* Are we prepared to handle this kernel fault? * * (The kernel has valid exception-points in the source - * when it acesses user-memory. When it fails in one + * when it accesses user-memory. When it fails in one * of those points, we find it in a table and do a jump * to some fixup code that loads an appropriate error * code) diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c index 674a837..f332e3f 100644 --- a/arch/ia64/hp/common/sba_iommu.c +++ b/arch/ia64/hp/common/sba_iommu.c @@ -1381,7 +1381,7 @@ sba_coalesce_chunks(struct ioc *ioc, struct device *dev, #endif /* - ** Not virtually contigous. + ** Not virtually contiguous. ** Terminate prev chunk. ** Start a new chunk. ** diff --git a/arch/ia64/ia32/ia32_entry.S b/arch/ia64/ia32/ia32_entry.S index af9405c..02d1fb7 100644 --- a/arch/ia64/ia32/ia32_entry.S +++ b/arch/ia64/ia32/ia32_entry.S @@ -79,7 +79,7 @@ GLOBAL_ENTRY(ia32_ret_from_clone) (p6) br.cond.spnt .ia32_strace_check_retval ;; // prevent RAW on r8 END(ia32_ret_from_clone) - // fall thrugh + // fall through GLOBAL_ENTRY(ia32_ret_from_syscall) PT_REGS_UNWIND_INFO(0) diff --git a/arch/ia64/include/asm/perfmon_default_smpl.h b/arch/ia64/include/asm/perfmon_default_smpl.h index 48822c0..74724b2 100644 --- a/arch/ia64/include/asm/perfmon_default_smpl.h +++ b/arch/ia64/include/asm/perfmon_default_smpl.h @@ -67,7 +67,7 @@ typedef struct { unsigned long ip; /* where did the overflow interrupt happened */ unsigned long tstamp; /* ar.itc when entering perfmon intr. handler */ - unsigned short cpu; /* cpu on which the overfow occured */ + unsigned short cpu; /* cpu on which the overflow occured */ unsigned short set; /* event set active when overflow ocurred */ int tgid; /* thread group id (for NPTL, this is getpid()) */ } pfm_default_smpl_entry_t; diff --git a/arch/ia64/include/asm/sn/shubio.h b/arch/ia64/include/asm/sn/shubio.h index 22a6f18..6052422 100644 --- a/arch/ia64/include/asm/sn/shubio.h +++ b/arch/ia64/include/asm/sn/shubio.h @@ -3289,7 +3289,7 @@ typedef ii_icrb0_e_u_t icrbe_t; #define IIO_IIDSR_LVL_SHIFT 0 #define IIO_IIDSR_LVL_MASK 0x000000ff -/* Xtalk timeout threshhold register (IIO_IXTT) */ +/* Xtalk timeout threshold register (IIO_IXTT) */ #define IXTT_RRSP_TO_SHFT 55 /* read response timeout */ #define IXTT_RRSP_TO_MASK (0x1FULL << IXTT_RRSP_TO_SHFT) #define IXTT_RRSP_PS_SHFT 32 /* read responsed TO prescalar */ diff --git a/arch/ia64/kernel/esi.c b/arch/ia64/kernel/esi.c index d5764a3..b091111 100644 --- a/arch/ia64/kernel/esi.c +++ b/arch/ia64/kernel/esi.c @@ -84,7 +84,7 @@ static int __init esi_init (void) case ESI_DESC_ENTRY_POINT: break; default: - printk(KERN_WARNING "Unkown table type %d found in " + printk(KERN_WARNING "Unknown table type %d found in " "ESI table, ignoring rest of table\n", *p); return -ENODEV; } diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index f178270..b3a1cb3 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -3523,7 +3523,7 @@ pfm_use_debug_registers(struct task_struct *task) * IA64_THREAD_DBG_VALID set. This indicates a task which was * able to use the debug registers for debugging purposes via * ptrace(). Therefore we know it was not using them for - * perfmormance monitoring, so we only decrement the number + * performance monitoring, so we only decrement the number * of "ptraced" debug register users to keep the count up to date */ int diff --git a/arch/m68k/ifpsp060/src/fpsp.S b/arch/m68k/ifpsp060/src/fpsp.S index 6c1a9a2..73613b5 100644 --- a/arch/m68k/ifpsp060/src/fpsp.S +++ b/arch/m68k/ifpsp060/src/fpsp.S @@ -753,7 +753,7 @@ fovfl_ovfl_on: bra.l _real_ovfl -# overflow occurred but is disabled. meanwhile, inexact is enabled. therefore, +# overflow occurred but is disabled. meanwhile, inexact is enabled. Therefore, # we must jump to real_inex(). fovfl_inex_on: @@ -1015,7 +1015,7 @@ funfl_unfl_on2: bra.l _real_unfl -# undeflow occurred but is disabled. meanwhile, inexact is enabled. therefore, +# underflow occurred but is disabled. meanwhile, inexact is enabled. Therefore, # we must jump to real_inex(). funfl_inex_on: @@ -2963,7 +2963,7 @@ iea_disabled: tst.w %d0 # is instr fmovm? bmi.b iea_dis_fmovm # yes -# instruction is using an extended precision immediate operand. therefore, +# instruction is using an extended precision immediate operand. Therefore, # the total instruction length is 16 bytes. iea_dis_immed: mov.l &0x10,%d0 # 16 bytes of instruction @@ -9624,7 +9624,7 @@ sok_dnrm: bge.b sok_norm2 # thank goodness no # the multiply factor that we're trying to create should be a denorm -# for the multiply to work. therefore, we're going to actually do a +# for the multiply to work. Therefore, we're going to actually do a # multiply with a denorm which will cause an unimplemented data type # exception to be put into the machine which will be caught and corrected # later. we don't do this with the DENORMs above because this method @@ -12216,7 +12216,7 @@ fin_sd_unfl_dis: # # operand will underflow AND underflow or inexact is enabled. -# therefore, we must return the result rounded to extended precision. +# Therefore, we must return the result rounded to extended precision. # fin_sd_unfl_ena: mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6) @@ -12746,7 +12746,7 @@ fdiv_zero_load_p: # # The destination was In Range and the source was a ZERO. The result, -# therefore, is an INF w/ the proper sign. +# Therefore, is an INF w/ the proper sign. # So, determine the sign and return a new INF (w/ the j-bit cleared). # global fdiv_inf_load # global for fsgldiv @@ -12996,7 +12996,7 @@ fneg_sd_unfl_dis: # # operand will underflow AND underflow is enabled. -# therefore, we must return the result rounded to extended precision. +# Therefore, we must return the result rounded to extended precision. # fneg_sd_unfl_ena: mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6) @@ -13611,7 +13611,7 @@ fabs_sd_unfl_dis: # # operand will underflow AND underflow is enabled. -# therefore, we must return the result rounded to extended precision. +# Therefore, we must return the result rounded to extended precision. # fabs_sd_unfl_ena: mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6) @@ -14973,7 +14973,7 @@ fadd_zero_2: # # the ZEROes have opposite signs: -# - therefore, we return +ZERO if the rounding modes are RN,RZ, or RP. +# - Therefore, we return +ZERO if the rounding modes are RN,RZ, or RP. # - -ZERO is returned in the case of RM. # fadd_zero_2_chk_rm: @@ -15425,7 +15425,7 @@ fsub_zero_2: # # the ZEROes have the same signs: -# - therefore, we return +ZERO if the rounding mode is RN,RZ, or RP +# - Therefore, we return +ZERO if the rounding mode is RN,RZ, or RP # - -ZERO is returned in the case of RM. # fsub_zero_2_chk_rm: @@ -15693,7 +15693,7 @@ fsqrt_sd_unfl_dis: # # operand will underflow AND underflow is enabled. -# therefore, we must return the result rounded to extended precision. +# Therefore, we must return the result rounded to extended precision. # fsqrt_sd_unfl_ena: mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6) @@ -21000,7 +21000,7 @@ fout_pack_type: tst.l %d0 bne.b fout_pack_set # "mantissa" is all zero which means that the answer is zero. but, the '040 -# algorithm allows the exponent to be non-zero. the 881/2 do not. therefore, +# algorithm allows the exponent to be non-zero. the 881/2 do not. Therefore, # if the mantissa is zero, I will zero the exponent, too. # the question now is whether the exponents sign bit is allowed to be non-zero # for a zero, also... @@ -21743,7 +21743,7 @@ denorm_set_stky: rts # # -# dnrm_lp(): normalize exponent/mantissa to specified threshhold # +# dnrm_lp(): normalize exponent/mantissa to specified threshold # # # # INPUT: # # %a0 : points to the operand to be denormalized # @@ -22402,7 +22402,7 @@ unnorm_shift: bgt.b unnorm_nrm_zero # yes; denorm only until exp = 0 # -# exponent would not go < 0. therefore, number stays normalized +# exponent would not go < 0. Therefore, number stays normalized # sub.w %d0, %d1 # shift exponent value mov.w FTEMP_EX(%a0), %d0 # load old exponent diff --git a/arch/m68k/ifpsp060/src/pfpsp.S b/arch/m68k/ifpsp060/src/pfpsp.S index 51b9f7d..e71ba0a 100644 --- a/arch/m68k/ifpsp060/src/pfpsp.S +++ b/arch/m68k/ifpsp060/src/pfpsp.S @@ -752,7 +752,7 @@ fovfl_ovfl_on: bra.l _real_ovfl -# overflow occurred but is disabled. meanwhile, inexact is enabled. therefore, +# overflow occurred but is disabled. meanwhile, inexact is enabled. Therefore, # we must jump to real_inex(). fovfl_inex_on: @@ -1014,7 +1014,7 @@ funfl_unfl_on2: bra.l _real_unfl -# undeflow occurred but is disabled. meanwhile, inexact is enabled. therefore, +# underflow occurred but is disabled. meanwhile, inexact is enabled. Therefore, # we must jump to real_inex(). funfl_inex_on: @@ -2962,7 +2962,7 @@ iea_disabled: tst.w %d0 # is instr fmovm? bmi.b iea_dis_fmovm # yes -# instruction is using an extended precision immediate operand. therefore, +# instruction is using an extended precision immediate operand. Therefore, # the total instruction length is 16 bytes. iea_dis_immed: mov.l &0x10,%d0 # 16 bytes of instruction @@ -5865,7 +5865,7 @@ denorm_set_stky: rts # # -# dnrm_lp(): normalize exponent/mantissa to specified threshhold # +# dnrm_lp(): normalize exponent/mantissa to specified threshold # # # # INPUT: # # %a0 : points to the operand to be denormalized # @@ -6524,7 +6524,7 @@ unnorm_shift: bgt.b unnorm_nrm_zero # yes; denorm only until exp = 0 # -# exponent would not go < 0. therefore, number stays normalized +# exponent would not go < 0. Therefore, number stays normalized # sub.w %d0, %d1 # shift exponent value mov.w FTEMP_EX(%a0), %d0 # load old exponent @@ -7901,7 +7901,7 @@ fout_pack_type: tst.l %d0 bne.b fout_pack_set # "mantissa" is all zero which means that the answer is zero. but, the '040 -# algorithm allows the exponent to be non-zero. the 881/2 do not. therefore, +# algorithm allows the exponent to be non-zero. the 881/2 do not. Therefore, # if the mantissa is zero, I will zero the exponent, too. # the question now is whether the exponents sign bit is allowed to be non-zero # for a zero, also... @@ -8647,7 +8647,7 @@ fin_sd_unfl_dis: # # operand will underflow AND underflow or inexact is enabled. -# therefore, we must return the result rounded to extended precision. +# Therefore, we must return the result rounded to extended precision. # fin_sd_unfl_ena: mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6) @@ -9177,7 +9177,7 @@ fdiv_zero_load_p: # # The destination was In Range and the source was a ZERO. The result, -# therefore, is an INF w/ the proper sign. +# Therefore, is an INF w/ the proper sign. # So, determine the sign and return a new INF (w/ the j-bit cleared). # global fdiv_inf_load # global for fsgldiv @@ -9427,7 +9427,7 @@ fneg_sd_unfl_dis: # # operand will underflow AND underflow is enabled. -# therefore, we must return the result rounded to extended precision. +# Therefore, we must return the result rounded to extended precision. # fneg_sd_unfl_ena: mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6) @@ -10042,7 +10042,7 @@ fabs_sd_unfl_dis: # # operand will underflow AND underflow is enabled. -# therefore, we must return the result rounded to extended precision. +# Therefore, we must return the result rounded to extended precision. # fabs_sd_unfl_ena: mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6) @@ -11404,7 +11404,7 @@ fadd_zero_2: # # the ZEROes have opposite signs: -# - therefore, we return +ZERO if the rounding modes are RN,RZ, or RP. +# - Therefore, we return +ZERO if the rounding modes are RN,RZ, or RP. # - -ZERO is returned in the case of RM. # fadd_zero_2_chk_rm: @@ -11856,7 +11856,7 @@ fsub_zero_2: # # the ZEROes have the same signs: -# - therefore, we return +ZERO if the rounding mode is RN,RZ, or RP +# - Therefore, we return +ZERO if the rounding mode is RN,RZ, or RP # - -ZERO is returned in the case of RM. # fsub_zero_2_chk_rm: @@ -12124,7 +12124,7 @@ fsqrt_sd_unfl_dis: # # operand will underflow AND underflow is enabled. -# therefore, we must return the result rounded to extended precision. +# Therefore, we must return the result rounded to extended precision. # fsqrt_sd_unfl_ena: mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6) diff --git a/arch/m68k/include/asm/bootinfo.h b/arch/m68k/include/asm/bootinfo.h index fb8a06b..67e7a78 100644 --- a/arch/m68k/include/asm/bootinfo.h +++ b/arch/m68k/include/asm/bootinfo.h @@ -145,7 +145,7 @@ struct bi_record { /* * Macintosh hardware profile data - unused, see macintosh.h for - * resonable type values + * reasonable type values */ #define BI_MAC_VIA1BASE 0x8010 /* Mac VIA1 base address (always present) */ diff --git a/arch/microblaze/lib/memcpy.c b/arch/microblaze/lib/memcpy.c index 6a907c5..cc2108b 100644 --- a/arch/microblaze/lib/memcpy.c +++ b/arch/microblaze/lib/memcpy.c @@ -9,7 +9,7 @@ * It is based on demo code originally Copyright 2001 by Intel Corp, taken from * http://www.embedded.com/showArticle.jhtml?articleID=19205567 * - * Attempts were made, unsuccesfully, to contact the original + * Attempts were made, unsuccessfully, to contact the original * author of this code (Michael Morrow, Intel). Below is the original * copyright notice. * diff --git a/arch/microblaze/lib/memmove.c b/arch/microblaze/lib/memmove.c index d4e9f49..0929198 100644 --- a/arch/microblaze/lib/memmove.c +++ b/arch/microblaze/lib/memmove.c @@ -9,7 +9,7 @@ * It is based on demo code originally Copyright 2001 by Intel Corp, taken from * http://www.embedded.com/showArticle.jhtml?articleID=19205567 * - * Attempts were made, unsuccesfully, to contact the original + * Attempts were made, unsuccessfully, to contact the original * author of this code (Michael Morrow, Intel). Below is the original * copyright notice. * diff --git a/arch/microblaze/lib/memset.c b/arch/microblaze/lib/memset.c index 941dc8f..4df851d 100644 --- a/arch/microblaze/lib/memset.c +++ b/arch/microblaze/lib/memset.c @@ -9,7 +9,7 @@ * It is based on demo code originally Copyright 2001 by Intel Corp, taken from * http://www.embedded.com/showArticle.jhtml?articleID=19205567 * - * Attempts were made, unsuccesfully, to contact the original + * Attempts were made, unsuccessfully, to contact the original * author of this code (Michael Morrow, Intel). Below is the original * copyright notice. * diff --git a/arch/mips/include/asm/mach-pnx833x/gpio.h b/arch/mips/include/asm/mach-pnx833x/gpio.h index 8de0eb9..ed3a88d 100644 --- a/arch/mips/include/asm/mach-pnx833x/gpio.h +++ b/arch/mips/include/asm/mach-pnx833x/gpio.h @@ -24,7 +24,7 @@ /* BIG FAT WARNING: races danger! No protections exist here. Current users are only early init code, - when locking is not needed because no cuncurency yet exists there, + when locking is not needed because no concurrency yet exists there, and GPIO IRQ dispatcher, which does locking. However, if many uses will ever happen, proper locking will be needed - including locking between different uses diff --git a/arch/mips/include/asm/sgi/ioc.h b/arch/mips/include/asm/sgi/ioc.h index 343ed15..57a9719 100644 --- a/arch/mips/include/asm/sgi/ioc.h +++ b/arch/mips/include/asm/sgi/ioc.h @@ -164,7 +164,7 @@ struct sgioc_regs { u32 _unused5; u8 _write[3]; volatile u8 write; -#define SGIOC_WRITE_NTHRESH 0x01 /* use 4.5db threshhold */ +#define SGIOC_WRITE_NTHRESH 0x01 /* use 4.5db threshold */ #define SGIOC_WRITE_TPSPEED 0x02 /* use 100ohm TP speed */ #define SGIOC_WRITE_EPSEL 0x04 /* force cable mode: 1=AUI 0=TP */ #define SGIOC_WRITE_EASEL 0x08 /* 1=autoselect 0=manual cable selection */ diff --git a/arch/mips/include/asm/sibyte/sb1250_mac.h b/arch/mips/include/asm/sibyte/sb1250_mac.h index b6faf08..591b906 100644 --- a/arch/mips/include/asm/sibyte/sb1250_mac.h +++ b/arch/mips/include/asm/sibyte/sb1250_mac.h @@ -212,7 +212,7 @@ #define G_MAC_TXD_WEIGHT1(x) _SB_GETVALUE(x, S_MAC_TXD_WEIGHT1, M_MAC_TXD_WEIGHT1) /* - * MAC Fifo Threshhold registers (Table 9-14) + * MAC Fifo Threshold registers (Table 9-14) * Register: MAC_THRSH_CFG_0 * Register: MAC_THRSH_CFG_1 * Register: MAC_THRSH_CFG_2 diff --git a/arch/mips/include/asm/sn/sn0/hubio.h b/arch/mips/include/asm/sn/sn0/hubio.h index d0c29d4..31c76c0 100644 --- a/arch/mips/include/asm/sn/sn0/hubio.h +++ b/arch/mips/include/asm/sn/sn0/hubio.h @@ -825,7 +825,7 @@ typedef union iprb_u { struct { u64 rsvd1: 15, error: 1, /* Widget rcvd wr resp pkt w/ error */ - ovflow: 5, /* Over flow count. perf measurement */ + ovflow: 5, /* Overflow count. perf measurement */ fire_and_forget: 1, /* Launch Write without response */ mode: 2, /* Widget operation Mode */ rsvd2: 2, diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 24630fd..a38e3ee 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -1331,7 +1331,7 @@ void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu) if (!((asid += ASID_INC) & ASID_MASK) ) { if (cpu_has_vtag_icache) flush_icache_all(); - /* Traverse all online CPUs (hack requires contigous range) */ + /* Traverse all online CPUs (hack requires contiguous range) */ for_each_online_cpu(i) { /* * We don't need to worry about our own CPU, nor those of diff --git a/arch/mips/math-emu/dp_sub.c b/arch/mips/math-emu/dp_sub.c index b30c5b1..a2127d6 100644 --- a/arch/mips/math-emu/dp_sub.c +++ b/arch/mips/math-emu/dp_sub.c @@ -110,7 +110,7 @@ ieee754dp ieee754dp_sub(ieee754dp x, ieee754dp y) case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM): DPDNORMX; - /* FAAL THOROUGH */ + /* FALL THROUGH */ case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM): /* normalize ym,ye */ diff --git a/arch/mips/txx9/generic/smsc_fdc37m81x.c b/arch/mips/txx9/generic/smsc_fdc37m81x.c index a2b2d62..8ebc384 100644 --- a/arch/mips/txx9/generic/smsc_fdc37m81x.c +++ b/arch/mips/txx9/generic/smsc_fdc37m81x.c @@ -117,7 +117,7 @@ unsigned long __init smsc_fdc37m81x_init(unsigned long port) if (chip_id == SMSC_FDC37M81X_CHIP_ID) smsc_fdc37m81x_config_end(); else { - printk(KERN_WARNING "%s: unknow chip id 0x%02x\n", __func__, + printk(KERN_WARNING "%s: unknown chip id 0x%02x\n", __func__, chip_id); g_smsc_fdc37m81x_base = 0; } diff --git a/arch/powerpc/include/asm/reg_fsl_emb.h b/arch/powerpc/include/asm/reg_fsl_emb.h index 1e180a5..0de404d 100644 --- a/arch/powerpc/include/asm/reg_fsl_emb.h +++ b/arch/powerpc/include/asm/reg_fsl_emb.h @@ -39,7 +39,7 @@ #define PMRN_PMLCB2 0x112 /* PM Local Control B2 */ #define PMRN_PMLCB3 0x113 /* PM Local Control B3 */ -#define PMLCB_THRESHMUL_MASK 0x0700 /* Threshhold Multiple Field */ +#define PMLCB_THRESHMUL_MASK 0x0700 /* Threshold Multiple Field */ #define PMLCB_THRESHMUL_SHIFT 8 #define PMLCB_THRESHOLD_MASK 0x003f /* Threshold Field */ diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c index 641c74b..b6bd1ea 100644 --- a/arch/powerpc/kernel/kgdb.c +++ b/arch/powerpc/kernel/kgdb.c @@ -52,7 +52,7 @@ static struct hard_trap_info { 0x2030, 0x08 /* SIGFPE */ }, /* spe fp data */ { 0x2040, 0x08 /* SIGFPE */ }, /* spe fp data */ { 0x2050, 0x08 /* SIGFPE */ }, /* spe fp round */ - { 0x2060, 0x0e /* SIGILL */ }, /* performace monitor */ + { 0x2060, 0x0e /* SIGILL */ }, /* performance monitor */ { 0x2900, 0x08 /* SIGFPE */ }, /* apu unavailable */ { 0x3100, 0x0e /* SIGALRM */ }, /* fixed interval timer */ { 0x3200, 0x02 /* SIGINT */ }, /* watchdog */ diff --git a/arch/powerpc/kernel/tau_6xx.c b/arch/powerpc/kernel/tau_6xx.c index c3a56d6..a753b72 100644 --- a/arch/powerpc/kernel/tau_6xx.c +++ b/arch/powerpc/kernel/tau_6xx.c @@ -59,7 +59,7 @@ void set_thresholds(unsigned long cpu) mtspr(SPRN_THRM1, THRM1_THRES(tau[cpu].low) | THRM1_V | THRM1_TIE | THRM1_TID); /* setup THRM2, - * threshold, valid bit, enable interrupts, interrupt when above threshhold + * threshold, valid bit, enable interrupts, interrupt when above threshold */ mtspr (SPRN_THRM2, THRM1_THRES(tau[cpu].high) | THRM1_V | THRM1_TIE); #else diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c index 52c98ed..2c9e522 100644 --- a/arch/powerpc/oprofile/op_model_cell.c +++ b/arch/powerpc/oprofile/op_model_cell.c @@ -1594,7 +1594,7 @@ static void cell_handle_interrupt_spu(struct pt_regs *regs, * to a latch. The new values (interrupt setting bits, reset * counter value etc.) are not copied to the actual registers * until the performance monitor is enabled. In order to get - * this to work as desired, the permormance monitor needs to + * this to work as desired, the performance monitor needs to * be disabled while writing to the latches. This is a * HW design issue. */ @@ -1668,7 +1668,7 @@ static void cell_handle_interrupt_ppu(struct pt_regs *regs, * to a latch. The new values (interrupt setting bits, reset * counter value etc.) are not copied to the actual registers * until the performance monitor is enabled. In order to get - * this to work as desired, the permormance monitor needs to + * this to work as desired, the performance monitor needs to * be disabled while writing to the latches. This is a * HW design issue. */ diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c index dd43114..da110bd 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_pci.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c @@ -100,7 +100,7 @@ const struct of_device_id mpc52xx_pci_ids[] __initdata = { }; /* ======================================================================== */ -/* PCI configuration acess */ +/* PCI configuration access */ /* ======================================================================== */ static int diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c index e81403b..ab2027c 100644 --- a/arch/powerpc/platforms/powermac/pci.c +++ b/arch/powerpc/platforms/powermac/pci.c @@ -302,7 +302,7 @@ static void __init setup_chaos(struct pci_controller *hose, * 1 -> Skip the device but act as if the access was successfull * (return 0xff's on reads, eventually, cache config space * accesses in a later version) - * -1 -> Hide the device (unsuccessful acess) + * -1 -> Hide the device (unsuccessful access) */ static int u3_ht_skip_device(struct pci_controller *hose, struct pci_bus *bus, unsigned int devfn) diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c index ae3c4db..bafc3f8 100644 --- a/arch/powerpc/sysdev/dart_iommu.c +++ b/arch/powerpc/sysdev/dart_iommu.c @@ -160,7 +160,7 @@ static int dart_build(struct iommu_table *tbl, long index, dp = ((unsigned int*)tbl->it_base) + index; - /* On U3, all memory is contigous, so we can move this + /* On U3, all memory is contiguous, so we can move this * out of the loop. */ l = npages; diff --git a/arch/s390/math-emu/math.c b/arch/s390/math-emu/math.c index 3ee78cc..cd4e9c1 100644 --- a/arch/s390/math-emu/math.c +++ b/arch/s390/math-emu/math.c @@ -2088,7 +2088,7 @@ int math_emu_ldr(__u8 *opcode) { __u16 opc = *((__u16 *) opcode); if ((opc & 0x90) == 0) { /* test if rx in {0,2,4,6} */ - /* we got an exception therfore ry can't be in {0,2,4,6} */ + /* we got an exception therefore ry can't be in {0,2,4,6} */ asm volatile( /* load rx from fp_regs.fprs[ry] */ " bras 1,0f\n" " ld 0,0(%1)\n" @@ -2118,7 +2118,7 @@ int math_emu_ler(__u8 *opcode) { __u16 opc = *((__u16 *) opcode); if ((opc & 0x90) == 0) { /* test if rx in {0,2,4,6} */ - /* we got an exception therfore ry can't be in {0,2,4,6} */ + /* we got an exception therefore ry can't be in {0,2,4,6} */ asm volatile( /* load rx from fp_regs.fprs[ry] */ " bras 1,0f\n" " le 0,0(%1)\n" diff --git a/arch/x86/include/asm/desc_defs.h b/arch/x86/include/asm/desc_defs.h index 9d66848..278441f 100644 --- a/arch/x86/include/asm/desc_defs.h +++ b/arch/x86/include/asm/desc_defs.h @@ -12,9 +12,9 @@ #include <linux/types.h> /* - * FIXME: Acessing the desc_struct through its fields is more elegant, + * FIXME: Accessing the desc_struct through its fields is more elegant, * and should be the one valid thing to do. However, a lot of open code - * still touches the a and b acessors, and doing this allow us to do it + * still touches the a and b accessors, and doing this allow us to do it * incrementally. We keep the signature as a struct, rather than an union, * so we can get rid of it transparently in the future -- glommer */ diff --git a/arch/x86/include/asm/mmzone_32.h b/arch/x86/include/asm/mmzone_32.h index ede6998..91df7c5 100644 --- a/arch/x86/include/asm/mmzone_32.h +++ b/arch/x86/include/asm/mmzone_32.h @@ -47,7 +47,7 @@ static inline void resume_map_numa_kva(pgd_t *pgd) {} /* * generic node memory support, the following assumptions apply: * - * 1) memory comes in 64Mb contigious chunks which are either present or not + * 1) memory comes in 64Mb contiguous chunks which are either present or not * 2) we will not have more than 64Gb in total * * for now assume that 64Gb is max amount of RAM for whole system diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h index 80e2984..b414d2b 100644 --- a/arch/x86/include/asm/uv/uv_bau.h +++ b/arch/x86/include/asm/uv/uv_bau.h @@ -55,7 +55,7 @@ #define DESC_STATUS_SOURCE_TIMEOUT 3 /* - * source side threshholds at which message retries print a warning + * source side thresholds at which message retries print a warning */ #define SOURCE_TIMEOUT_LIMIT 20 #define DESTINATION_TIMEOUT_LIMIT 20 diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 67e929b..1c2c483 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -1122,7 +1122,7 @@ static int __init acpi_parse_madt_ioapic_entries(void) if (!acpi_sci_override_gsi) acpi_sci_ioapic_setup(acpi_gbl_FADT.sci_interrupt, 0, 0); - /* Fill in identity legacy mapings where no override */ + /* Fill in identity legacy mappings where no override */ mp_config_acpi_legacy_irqs(); count = diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index 0285521..42ac5e0 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -1637,7 +1637,7 @@ retry: goto out; /* - * aperture was sucessfully enlarged by 128 MB, try + * aperture was successfully enlarged by 128 MB, try * allocation again */ goto retry; @@ -2396,7 +2396,7 @@ int __init amd_iommu_init_passthrough(void) struct pci_dev *dev = NULL; u16 devid, devid2; - /* allocate passthroug domain */ + /* allocate passthrough domain */ pt_domain = protection_domain_alloc(); if (!pt_domain) return -ENOMEM; diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index b5801c3..35be580 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -1229,7 +1229,7 @@ x86_perf_event_set_period(struct perf_event *event, return 0; /* - * If we are way outside a reasoable range then just skip forward: + * If we are way outside a reasonable range then just skip forward: */ if (unlikely(left <= -period)) { left = period; diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c index 7b5169d..7d37737 100644 --- a/arch/x86/kernel/kprobes.c +++ b/arch/x86/kernel/kprobes.c @@ -514,7 +514,7 @@ static int __kprobes reenter_kprobe(struct kprobe *p, struct pt_regs *regs, /* * Interrupts are disabled on entry as trap3 is an interrupt gate and they - * remain disabled thorough out this function. + * remain disabled throughout this function. */ static int __kprobes kprobe_handler(struct pt_regs *regs) { @@ -851,7 +851,7 @@ no_change: /* * Interrupts are disabled on entry as trap1 is an interrupt gate and they - * remain disabled thoroughout this function. + * remain disabled throughout this function. */ static int __kprobes post_kprobe_handler(struct pt_regs *regs) { diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c index 16ccbd7..d16d576 100644 --- a/arch/x86/mm/kmmio.c +++ b/arch/x86/mm/kmmio.c @@ -203,7 +203,7 @@ static void disarm_kmmio_fault_page(struct kmmio_fault_page *f) */ /* * Interrupts are disabled on entry as trap3 is an interrupt gate - * and they remain disabled thorough out this function. + * and they remain disabled throughout this function. */ int kmmio_handler(struct pt_regs *regs, unsigned long addr) { @@ -302,7 +302,7 @@ no_kmmio: /* * Interrupts are disabled on entry as trap1 is an interrupt gate - * and they remain disabled thorough out this function. + * and they remain disabled throughout this function. * This must always get called as the pair to kmmio_handler(). */ static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs) |