Merge branch 'master' into for-next

Conflicts:
	MAINTAINERS
	arch/arm/mach-omap2/pm24xx.c
	drivers/scsi/bfa/bfa_fcpim.c

Needed to update to apply fixes for which the old branch was too
outdated.

4 files changed, 19 insertions, 18 deletions

diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index d050e07..66aa4be 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2552,8 +2552,11 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc)
 		 *
 		 * If door lock fails, always clear sdev->locked to
 		 * avoid this infinite loop.
+		 *
+		 * This may happen before SCSI scan is complete.  Make
+		 * sure qc->dev->sdev isn't NULL before dereferencing.
 		 */
-		if (qc->cdb[0] == ALLOW_MEDIUM_REMOVAL)
+		if (qc->cdb[0] == ALLOW_MEDIUM_REMOVAL && qc->dev->sdev)
 			qc->dev->sdev->locked = 0;
 
 		qc->scsicmd->result = SAM_STAT_CHECK_CONDITION;
@@ -3163,8 +3166,8 @@ static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd,
 
 /**
  *	ata_scsi_queuecmd - Issue SCSI cdb to libata-managed device
+ *	@shost: SCSI host of command to be sent
  *	@cmd: SCSI command to be sent
- *	@done: Completion function, called when command is complete
  *
  *	In some cases, this function translates SCSI commands into
  *	ATA taskfiles, and queues the taskfiles to be sent to
@@ -3174,37 +3177,36 @@ static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd,
  *	ATA and ATAPI devices appearing as SCSI devices.
  *
  *	LOCKING:
- *	Releases scsi-layer-held lock, and obtains host lock.
+ *	ATA host lock
  *
  *	RETURNS:
  *	Return value from __ata_scsi_queuecmd() if @cmd can be queued,
  *	0 otherwise.
  */
-int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
+int ata_scsi_queuecmd(struct Scsi_Host *shost, struct scsi_cmnd *cmd)
 {
 	struct ata_port *ap;
 	struct ata_device *dev;
 	struct scsi_device *scsidev = cmd->device;
-	struct Scsi_Host *shost = scsidev->host;
 	int rc = 0;
+	unsigned long irq_flags;
 
 	ap = ata_shost_to_port(shost);
 
-	spin_unlock(shost->host_lock);
-	spin_lock(ap->lock);
+	spin_lock_irqsave(ap->lock, irq_flags);
 
 	ata_scsi_dump_cdb(ap, cmd);
 
 	dev = ata_scsi_find_dev(ap, scsidev);
 	if (likely(dev))
-		rc = __ata_scsi_queuecmd(cmd, done, dev);
+		rc = __ata_scsi_queuecmd(cmd, cmd->scsi_done, dev);
 	else {
 		cmd->result = (DID_BAD_TARGET << 16);
-		done(cmd);
+		cmd->scsi_done(cmd);
 	}
 
-	spin_unlock(ap->lock);
-	spin_lock(shost->host_lock);
+	spin_unlock_irqrestore(ap->lock, irq_flags);
+
 	return rc;
 }
 
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index eaf1941..6bd9425 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -142,7 +142,7 @@ static int autospeed;		/* Chip present which snoops speed changes */
 static int pio_mask = ATA_PIO4;	/* PIO range for autospeed devices */
 static int iordy_mask = 0xFFFFFFFF;	/* Use iordy if available */
 
-#ifdef PATA_WINBOND_VLB_MODULE
+#ifdef CONFIG_PATA_WINBOND_VLB_MODULE
 static int winbond = 1;		/* Set to probe Winbond controllers,
 					give I/O port if non standard */
 #else
diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c
index 74b8298..fa1b95a 100644
--- a/drivers/ata/pata_octeon_cf.c
+++ b/drivers/ata/pata_octeon_cf.c
@@ -653,8 +653,6 @@ static irqreturn_t octeon_cf_interrupt(int irq, void *dev_instance)
 
 		ap = host->ports[i];
 		ocd = ap->dev->platform_data;
-
-		ocd = ap->dev->platform_data;
 		cf_port = ap->private_data;
 		dma_int.u64 =
 			cvmx_read_csr(CVMX_MIO_BOOT_DMA_INTX(ocd->dma_engine));
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index c215899..8b677bb 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -538,7 +538,7 @@ static int vt8251_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
 	return 0;
 }
 
-static void svia_configure(struct pci_dev *pdev)
+static void svia_configure(struct pci_dev *pdev, int board_id)
 {
 	u8 tmp8;
 
@@ -577,7 +577,7 @@ static void svia_configure(struct pci_dev *pdev)
 	}
 
 	/*
-	 * vt6421 has problems talking to some drives.  The following
+	 * vt6420/1 has problems talking to some drives.  The following
 	 * is the fix from Joseph Chan <JosephChan@via.com.tw>.
 	 *
 	 * When host issues HOLD, device may send up to 20DW of data
@@ -596,8 +596,9 @@ static void svia_configure(struct pci_dev *pdev)
 	 *
 	 * https://bugzilla.kernel.org/show_bug.cgi?id=15173
 	 * http://article.gmane.org/gmane.linux.ide/46352
+	 * http://thread.gmane.org/gmane.linux.kernel/1062139
 	 */
-	if (pdev->device == 0x3249) {
+	if (board_id == vt6420 || board_id == vt6421) {
 		pci_read_config_byte(pdev, 0x52, &tmp8);
 		tmp8 |= 1 << 2;
 		pci_write_config_byte(pdev, 0x52, tmp8);
@@ -652,7 +653,7 @@ static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (rc)
 		return rc;
 
-	svia_configure(pdev);
+	svia_configure(pdev, board_id);
 
 	pci_set_master(pdev);
 	return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,