Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (442 commits)
  [media] videobuf2-dma-contig: make cookie() return a pointer to dma_addr_t
  [media] sh_mobile_ceu_camera: Do not call vb2's mem_ops directly
  [media] V4L: soc-camera: explicitly require V4L2_BUF_TYPE_VIDEO_CAPTURE
  [media] v4l: soc-camera: Store negotiated buffer settings
  [media] rc: interim support for 32-bit NEC-ish scancodes
  [media] mceusb: topseed 0x0011 needs gen3 init for tx to work
  [media] lirc_zilog: error out if buffer read bytes != chunk size
  [media] lirc: silence some compile warnings
  [media] hdpvr: use same polling interval as other OS
  [media] ir-kbd-i2c: pass device code w/key in hauppauge case
  [media] rc/keymaps: Remove the obsolete rc-rc5-tv keymap
  [media] remove the old RC_MAP_HAUPPAUGE_NEW RC map
  [media] rc/keymaps: Rename Hauppauge table as rc-hauppauge
  [media] rc-rc5-hauppauge-new: Fix Hauppauge Grey mapping
  [media] rc-rc5-hauppauge-new: Add support for the old Black RC
  [media] rc-rc5-hauppauge-new: Add the old control to the table
  [media] rc-winfast: Fix the keycode tables
  [media] a800: Fix a few wrong IR key assignments
  [media] opera1: Use multimedia keys instead of an app-specific mapping
  [media] dw2102: Use multimedia keys instead of an app-specific mapping
  ...

Fix up trivial conflicts (remove/modify and some real conflicts) in:
	arch/arm/mach-omap2/devices.c
	drivers/staging/Kconfig
	drivers/staging/Makefile
	drivers/staging/dabusb/dabusb.c
	drivers/staging/dabusb/dabusb.h
	drivers/staging/easycap/easycap_ioctl.c
	drivers/staging/usbvideo/usbvideo.c
	drivers/staging/usbvideo/vicam.c

42 files changed, 2689 insertions, 316 deletions

diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
index 3785162..7f03142 100644
--- a/drivers/media/rc/Kconfig
+++ b/drivers/media/rc/Kconfig
@@ -135,6 +135,19 @@ config IR_MCEUSB
 	   To compile this driver as a module, choose M here: the
 	   module will be called mceusb.
 
+config IR_ITE_CIR
+	tristate "ITE Tech Inc. IT8712/IT8512 Consumer Infrared Transceiver"
+	depends on PNP
+	depends on RC_CORE
+	---help---
+	   Say Y here to enable support for integrated infrared receivers
+	   /transceivers made by ITE Tech Inc. These are found in
+	   several ASUS devices, like the ASUS Digimatrix or the ASUS
+	   EEEBox 1501U.
+
+	   To compile this driver as a module, choose M here: the
+	   module will be called ite-cir.
+
 config IR_NUVOTON
 	tristate "Nuvoton w836x7hg Consumer Infrared Transceiver"
 	depends on PNP
@@ -161,20 +174,20 @@ config IR_STREAMZAP
 	   module will be called streamzap.
 
 config IR_WINBOND_CIR
-        tristate "Winbond IR remote control"
-        depends on X86 && PNP
+	tristate "Winbond IR remote control"
+	depends on X86 && PNP
 	depends on RC_CORE
-        select NEW_LEDS
-        select LEDS_CLASS
-        select LEDS_TRIGGERS
-        select BITREVERSE
-	---help---
-           Say Y here if you want to use the IR remote functionality found
-           in some Winbond SuperI/O chips. Currently only the WPCD376I
-           chip is supported (included in some Intel Media series
+	select NEW_LEDS
+	select LEDS_CLASS
+	select LEDS_TRIGGERS
+	select BITREVERSE
+	---help---
+	   Say Y here if you want to use the IR remote functionality found
+	   in some Winbond SuperI/O chips. Currently only the WPCD376I
+	   chip is supported (included in some Intel Media series
 	   motherboards).
 
-           To compile this driver as a module, choose M here: the module will
+	   To compile this driver as a module, choose M here: the module will
 	   be called winbond_cir.
 
 config RC_LOOPBACK
diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
index 67b4f7f..c6cfe70 100644
--- a/drivers/media/rc/Makefile
+++ b/drivers/media/rc/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_IR_LIRC_CODEC) += ir-lirc-codec.o
 
 # stand-alone IR receivers/transmitters
 obj-$(CONFIG_IR_IMON) += imon.o
+obj-$(CONFIG_IR_ITE_CIR) += ite-cir.o
 obj-$(CONFIG_IR_MCEUSB) += mceusb.o
 obj-$(CONFIG_IR_NUVOTON) += nuvoton-cir.o
 obj-$(CONFIG_IR_ENE) += ene_ir.o
diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c
index e7dc6b4..f714e1a 100644
--- a/drivers/media/rc/imon.c
+++ b/drivers/media/rc/imon.c
@@ -277,12 +277,21 @@ static const struct {
 	u64 hw_code;
 	u32 keycode;
 } imon_panel_key_table[] = {
-	{ 0x000000000f00ffeell, KEY_PROG1 }, /* Go */
+	{ 0x000000000f00ffeell, KEY_MEDIA }, /* Go */
+	{ 0x000000001200ffeell, KEY_UP },
+	{ 0x000000001300ffeell, KEY_DOWN },
+	{ 0x000000001400ffeell, KEY_LEFT },
+	{ 0x000000001500ffeell, KEY_RIGHT },
+	{ 0x000000001600ffeell, KEY_ENTER },
+	{ 0x000000001700ffeell, KEY_ESC },
 	{ 0x000000001f00ffeell, KEY_AUDIO },
 	{ 0x000000002000ffeell, KEY_VIDEO },
 	{ 0x000000002100ffeell, KEY_CAMERA },
 	{ 0x000000002700ffeell, KEY_DVD },
 	{ 0x000000002300ffeell, KEY_TV },
+	{ 0x000000002b00ffeell, KEY_EXIT },
+	{ 0x000000002c00ffeell, KEY_SELECT },
+	{ 0x000000002d00ffeell, KEY_MENU },
 	{ 0x000000000500ffeell, KEY_PREVIOUS },
 	{ 0x000000000700ffeell, KEY_REWIND },
 	{ 0x000000000400ffeell, KEY_STOP },
diff --git a/drivers/media/rc/ir-nec-decoder.c b/drivers/media/rc/ir-nec-decoder.c
index 7b58b4a..63ee722 100644
--- a/drivers/media/rc/ir-nec-decoder.c
+++ b/drivers/media/rc/ir-nec-decoder.c
@@ -49,6 +49,7 @@ static int ir_nec_decode(struct rc_dev *dev, struct ir_raw_event ev)
 	struct nec_dec *data = &dev->raw->nec;
 	u32 scancode;
 	u8 address, not_address, command, not_command;
+	bool send_32bits = false;
 
 	if (!(dev->raw->enabled_protocols & RC_TYPE_NEC))
 		return 0;
@@ -164,10 +165,15 @@ static int ir_nec_decode(struct rc_dev *dev, struct ir_raw_event ev)
 		if ((command ^ not_command) != 0xff) {
 			IR_dprintk(1, "NEC checksum error: received 0x%08x\n",
 				   data->bits);
-			break;
+			send_32bits = true;
 		}
 
-		if ((address ^ not_address) != 0xff) {
+		if (send_32bits) {
+			/* NEC transport, but modified protocol, used by at
+			 * least Apple and TiVo remotes */
+			scancode = data->bits;
+			IR_dprintk(1, "NEC (modified) scancode 0x%08x\n", scancode);
+		} else if ((address ^ not_address) != 0xff) {
 			/* Extended NEC */
 			scancode = address     << 16 |
 				   not_address <<  8 |
diff --git a/drivers/media/rc/ite-cir.c b/drivers/media/rc/ite-cir.c
new file mode 100644
index 0000000..9be6a83
--- /dev/null
+++ b/drivers/media/rc/ite-cir.c
@@ -0,0 +1,1736 @@
+/*
+ * Driver for ITE Tech Inc. IT8712F/IT8512 CIR
+ *
+ * Copyright (C) 2010 Juan Jesús García de Soria <skandalfo@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA.
+ *
+ * Inspired by the original lirc_it87 and lirc_ite8709 drivers, on top of the
+ * skeleton provided by the nuvoton-cir driver.
+ *
+ * The lirc_it87 driver was originally written by Hans-Gunter Lutke Uphues
+ * <hg_lu@web.de> in 2001, with enhancements by Christoph Bartelmus
+ * <lirc@bartelmus.de>, Andrew Calkin <r_tay@hotmail.com> and James Edwards
+ * <jimbo-lirc@edwardsclan.net>.
+ *
+ * The lirc_ite8709 driver was written by Grégory Lardière
+ * <spmf2004-lirc@yahoo.fr> in 2008.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pnp.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/bitops.h>
+#include <media/rc-core.h>
+#include <linux/pci_ids.h>
+
+#include "ite-cir.h"
+
+/* module parameters */
+
+/* debug level */
+static int debug;
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable debugging output");
+
+/* low limit for RX carrier freq, Hz, 0 for no RX demodulation */
+static int rx_low_carrier_freq;
+module_param(rx_low_carrier_freq, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(rx_low_carrier_freq, "Override low RX carrier frequency, Hz, "
+		 "0 for no RX demodulation");
+
+/* high limit for RX carrier freq, Hz, 0 for no RX demodulation */
+static int rx_high_carrier_freq;
+module_param(rx_high_carrier_freq, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(rx_high_carrier_freq, "Override high RX carrier frequency, "
+		 "Hz, 0 for no RX demodulation");
+
+/* override tx carrier frequency */
+static int tx_carrier_freq;
+module_param(tx_carrier_freq, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(tx_carrier_freq, "Override TX carrier frequency, Hz");
+
+/* override tx duty cycle */
+static int tx_duty_cycle;
+module_param(tx_duty_cycle, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(tx_duty_cycle, "Override TX duty cycle, 1-100");
+
+/* override default sample period */
+static long sample_period;
+module_param(sample_period, long, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(sample_period, "Override carrier sample period, us");
+
+/* override detected model id */
+static int model_number = -1;
+module_param(model_number, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(model_number, "Use this model number, don't autodetect");
+
+
+/* HW-independent code functions */
+
+/* check whether carrier frequency is high frequency */
+static inline bool ite_is_high_carrier_freq(unsigned int freq)
+{
+	return freq >= ITE_HCF_MIN_CARRIER_FREQ;
+}
+
+/* get the bits required to program the carrier frequency in CFQ bits,
+ * unshifted */
+static u8 ite_get_carrier_freq_bits(unsigned int freq)
+{
+	if (ite_is_high_carrier_freq(freq)) {
+		if (freq < 425000)
+			return ITE_CFQ_400;
+
+		else if (freq < 465000)
+			return ITE_CFQ_450;
+
+		else if (freq < 490000)
+			return ITE_CFQ_480;
+
+		else
+			return ITE_CFQ_500;
+	} else {
+			/* trim to limits */
+		if (freq < ITE_LCF_MIN_CARRIER_FREQ)
+			freq = ITE_LCF_MIN_CARRIER_FREQ;
+		if (freq > ITE_LCF_MAX_CARRIER_FREQ)
+			freq = ITE_LCF_MAX_CARRIER_FREQ;
+
+		/* convert to kHz and subtract the base freq */
+		freq =
+		    DIV_ROUND_CLOSEST(freq - ITE_LCF_MIN_CARRIER_FREQ,
+				      1000);
+
+		return (u8) freq;
+	}
+}
+
+/* get the bits required to program the pulse with in TXMPW */
+static u8 ite_get_pulse_width_bits(unsigned int freq, int duty_cycle)
+{
+	unsigned long period_ns, on_ns;
+
+	/* sanitize freq into range */
+	if (freq < ITE_LCF_MIN_CARRIER_FREQ)
+		freq = ITE_LCF_MIN_CARRIER_FREQ;
+	if (freq > ITE_HCF_MAX_CARRIER_FREQ)
+		freq = ITE_HCF_MAX_CARRIER_FREQ;
+
+	period_ns = 1000000000UL / freq;
+	on_ns = period_ns * duty_cycle / 100;
+
+	if (ite_is_high_carrier_freq(freq)) {
+		if (on_ns < 750)
+			return ITE_TXMPW_A;
+
+		else if (on_ns < 850)
+			return ITE_TXMPW_B;
+
+		else if (on_ns < 950)
+			return ITE_TXMPW_C;
+
+		else if (on_ns < 1080)
+			return ITE_TXMPW_D;
+
+		else
+			return ITE_TXMPW_E;
+	} else {
+		if (on_ns < 6500)
+			return ITE_TXMPW_A;
+
+		else if (on_ns < 7850)
+			return ITE_TXMPW_B;
+
+		else if (on_ns < 9650)
+			return ITE_TXMPW_C;
+
+		else if (on_ns < 11950)
+			return ITE_TXMPW_D;
+
+		else
+			return ITE_TXMPW_E;
+	}
+}
+
+/* decode raw bytes as received by the hardware, and push them to the ir-core
+ * layer */
+static void ite_decode_bytes(struct ite_dev *dev, const u8 * data, int
+			     length)
+{
+	u32 sample_period;
+	unsigned long *ldata;
+	unsigned int next_one, next_zero, size;
+	DEFINE_IR_RAW_EVENT(ev);
+
+	if (length == 0)
+		return;
+
+	sample_period = dev->params.sample_period;
+	ldata = (unsigned long *)data;
+	size = length << 3;
+	next_one = generic_find_next_le_bit(ldata, size, 0);
+	if (next_one > 0) {
+		ev.pulse = true;
+		ev.duration =
+		    ITE_BITS_TO_NS(next_one, sample_period);
+		ir_raw_event_store_with_filter(dev->rdev, &ev);
+	}
+
+	while (next_one < size) {
+		next_zero = generic_find_next_zero_le_bit(ldata, size, next_one + 1);
+		ev.pulse = false;
+		ev.duration = ITE_BITS_TO_NS(next_zero - next_one, sample_period);
+		ir_raw_event_store_with_filter(dev->rdev, &ev);
+
+		if (next_zero < size) {
+			next_one =
+			    generic_find_next_le_bit(ldata,
+						     size,
+						     next_zero + 1);
+			ev.pulse = true;
+			ev.duration =
+			    ITE_BITS_TO_NS(next_one - next_zero,
+					   sample_period);
+			ir_raw_event_store_with_filter
+			    (dev->rdev, &ev);
+		} else
+			next_one = size;
+	}
+
+	ir_raw_event_handle(dev->rdev);
+
+	ite_dbg_verbose("decoded %d bytes.", length);
+}
+
+/* set all the rx/tx carrier parameters; this must be called with the device
+ * spinlock held */
+static void ite_set_carrier_params(struct ite_dev *dev)
+{
+	unsigned int freq, low_freq, high_freq;
+	int allowance;
+	bool use_demodulator;
+	bool for_tx = dev->transmitting;
+
+	ite_dbg("%s called", __func__);
+
+	if (for_tx) {
+		/* we don't need no stinking calculations */
+		freq = dev->params.tx_carrier_freq;
+		allowance = ITE_RXDCR_DEFAULT;
+		use_demodulator = false;
+	} else {
+		low_freq = dev->params.rx_low_carrier_freq;
+		high_freq = dev->params.rx_high_carrier_freq;
+
+		if (low_freq == 0) {
+			/* don't demodulate */
+			freq =
+			ITE_DEFAULT_CARRIER_FREQ;
+			allowance = ITE_RXDCR_DEFAULT;
+			use_demodulator = false;
+		} else {
+			/* calculate the middle freq */
+			freq = (low_freq + high_freq) / 2;
+
+			/* calculate the allowance */
+			allowance =
+			    DIV_ROUND_CLOSEST(10000 * (high_freq - low_freq),
+					      ITE_RXDCR_PER_10000_STEP
+					      * (high_freq + low_freq));
+
+			if (allowance < 1)
+				allowance = 1;
+
+			if (allowance > ITE_RXDCR_MAX)
+				allowance = ITE_RXDCR_MAX;
+		}
+	}
+
+	/* set the carrier parameters in a device-dependent way */
+	dev->params.set_carrier_params(dev, ite_is_high_carrier_freq(freq),
+		 use_demodulator, ite_get_carrier_freq_bits(freq), allowance,
+		 ite_get_pulse_width_bits(freq, dev->params.tx_duty_cycle));
+}
+
+/* interrupt service routine for incoming and outgoing CIR data */
+static irqreturn_t ite_cir_isr(int irq, void *data)
+{
+	struct ite_dev *dev = data;
+	unsigned long flags;
+	irqreturn_t ret = IRQ_RETVAL(IRQ_NONE);
+	u8 rx_buf[ITE_RX_FIFO_LEN];
+	int rx_bytes;
+	int iflags;
+
+	ite_dbg_verbose("%s firing", __func__);
+
+	/* grab the spinlock */
+	spin_lock_irqsave(&dev->lock, flags);
+
+	/* read the interrupt flags */
+	iflags = dev->params.get_irq_causes(dev);
+
+	/* check for the receive interrupt */
+	if (iflags & (ITE_IRQ_RX_FIFO | ITE_IRQ_RX_FIFO_OVERRUN)) {
+		/* read the FIFO bytes */
+		rx_bytes =
+			dev->params.get_rx_bytes(dev, rx_buf,
+					     ITE_RX_FIFO_LEN);
+
+		if (rx_bytes > 0) {
+			/* drop the spinlock, since the ir-core layer
+			 * may call us back again through
+			 * ite_s_idle() */
+			spin_unlock_irqrestore(&dev->
+									 lock,
+									 flags);
+
+			/* decode the data we've just received */
+			ite_decode_bytes(dev, rx_buf,
+								   rx_bytes);
+
+			/* reacquire the spinlock */
+			spin_lock_irqsave(&dev->lock,
+								    flags);
+
+			/* mark the interrupt as serviced */
+			ret = IRQ_RETVAL(IRQ_HANDLED);
+		}
+	} else if (iflags & ITE_IRQ_TX_FIFO) {
+		/* FIFO space available interrupt */
+		ite_dbg_verbose("got interrupt for TX FIFO");
+
+		/* wake any sleeping transmitter */
+		wake_up_interruptible(&dev->tx_queue);
+
+		/* mark the interrupt as serviced */
+		ret = IRQ_RETVAL(IRQ_HANDLED);
+	}
+
+	/* drop the spinlock */
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	ite_dbg_verbose("%s done returning %d", __func__, (int)ret);
+
+	return ret;
+}
+
+/* set the rx carrier freq range, guess it's in Hz... */
+static int ite_set_rx_carrier_range(struct rc_dev *rcdev, u32 carrier_low, u32
+				    carrier_high)
+{
+	unsigned long flags;
+	struct ite_dev *dev = rcdev->priv;
+
+	spin_lock_irqsave(&dev->lock, flags);
+	dev->params.rx_low_carrier_freq = carrier_low;
+	dev->params.rx_high_carrier_freq = carrier_high;
+	ite_set_carrier_params(dev);
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return 0;
+}
+
+/* set the tx carrier freq, guess it's in Hz... */
+static int ite_set_tx_carrier(struct rc_dev *rcdev, u32 carrier)
+{
+	unsigned long flags;
+	struct ite_dev *dev = rcdev->priv;
+
+	spin_lock_irqsave(&dev->lock, flags);
+	dev->params.tx_carrier_freq = carrier;
+	ite_set_carrier_params(dev);
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return 0;
+}
+
+/* set the tx duty cycle by controlling the pulse width */
+static int ite_set_tx_duty_cycle(struct rc_dev *rcdev, u32 duty_cycle)
+{
+	unsigned long flags;
+	struct ite_dev *dev = rcdev->priv;
+
+	spin_lock_irqsave(&dev->lock, flags);
+	dev->params.tx_duty_cycle = duty_cycle;
+	ite_set_carrier_params(dev);
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return 0;
+}
+
+/* transmit out IR pulses; what you get here is a batch of alternating
+ * pulse/space/pulse/space lengths that we should write out completely through
+ * the FIFO, blocking on a full FIFO */
+static int ite_tx_ir(struct rc_dev *rcdev, int *txbuf, u32 n)
+{
+	unsigned long flags;
+	struct ite_dev *dev = rcdev->priv;
+	bool is_pulse = false;
+	int remaining_us, fifo_avail, fifo_remaining, last_idx = 0;
+	int max_rle_us, next_rle_us;
+	int ret = n;
+	u8 last_sent[ITE_TX_FIFO_LEN];
+	u8 val;
+
+	ite_dbg("%s called", __func__);
+
+	/* clear the array just in case */
+	memset(last_sent, 0, ARRAY_SIZE(last_sent));
+
+	/* n comes in bytes; convert to ints */
+	n /= sizeof(int);
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	/* let everybody know we're now transmitting */
+	dev->transmitting = true;
+
+	/* and set the carrier values for transmission */
+	ite_set_carrier_params(dev);
+
+	/* calculate how much time we can send in one byte */
+	max_rle_us =
+	    (ITE_BAUDRATE_DIVISOR * dev->params.sample_period *
+	     ITE_TX_MAX_RLE) / 1000;
+
+	/* disable the receiver */
+	dev->params.disable_rx(dev);
+
+	/* this is where we'll begin filling in the FIFO, until it's full.
+	 * then we'll just activate the interrupt, wait for it to wake us up
+	 * again, disable it, continue filling the FIFO... until everything
+	 * has been pushed out */
+	fifo_avail =
+	    ITE_TX_FIFO_LEN - dev->params.get_tx_used_slots(dev);
+
+	while (n > 0 && dev->in_use) {
+		/* transmit the next sample */
+		is_pulse = !is_pulse;
+		remaining_us = *(txbuf++);
+		n--;
+
+		ite_dbg("%s: %ld",
+				      ((is_pulse) ? "pulse" : "space"),
+				      (long int)
+				      remaining_us);
+
+		/* repeat while the pulse is non-zero length */
+		while (remaining_us > 0 && dev->in_use) {
+			if (remaining_us > max_rle_us)
+				next_rle_us = max_rle_us;
+
+			else
+				next_rle_us = remaining_us;
+
+			remaining_us -= next_rle_us;
+
+			/* check what's the length we have to pump out */
+			val = (ITE_TX_MAX_RLE * next_rle_us) / max_rle_us;
+
+			/* put it into the sent buffer */
+			last_sent[last_idx++] = val;
+			last_idx &= (ITE_TX_FIFO_LEN);
+
+			/* encode it for 7 bits */
+			val = (val - 1) & ITE_TX_RLE_MASK;
+
+			/* take into account pulse/space prefix */
+			if (is_pulse)
+				val |= ITE_TX_PULSE;
+
+			else
+				val |= ITE_TX_SPACE;
+
+			/*
+			 * if we get to 0 available, read again, just in case
+			 * some other slot got freed
+			 */
+			if (fifo_avail <= 0)
+				fifo_avail = ITE_TX_FIFO_LEN - dev->params.get_tx_used_slots(dev);
+
+			/* if it's still full */
+			if (fifo_avail <= 0) {
+				/* enable the tx interrupt */
+				dev->params.
+				enable_tx_interrupt(dev);
+
+				/* drop the spinlock */
+				spin_unlock_irqrestore(&dev->lock, flags);
+
+				/* wait for the FIFO to empty enough */
+				wait_event_interruptible(dev->tx_queue, (fifo_avail = ITE_TX_FIFO_LEN - dev->params.get_tx_used_slots(dev)) >= 8);
+
+				/* get the spinlock again */
+				spin_lock_irqsave(&dev->lock, flags);
+
+				/* disable the tx interrupt again. */
+				dev->params.
+				disable_tx_interrupt(dev);
+			}
+
+			/* now send the byte through the FIFO */
+			dev->params.put_tx_byte(dev, val);
+			fifo_avail--;
+		}
+	}
+
+	/* wait and don't return until the whole FIFO has been sent out;
+	 * otherwise we could configure the RX carrier params instead of the
+	 * TX ones while the transmission is still being performed! */
+	fifo_remaining = dev->params.get_tx_used_slots(dev);
+	remaining_us = 0;
+	while (fifo_remaining > 0) {
+		fifo_remaining--;
+		last_idx--;
+		last_idx &= (ITE_TX_FIFO_LEN - 1);
+		remaining_us += last_sent[last_idx];
+	}
+	remaining_us = (remaining_us * max_rle_us) / (ITE_TX_MAX_RLE);
+
+	/* drop the spinlock while we sleep */
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	/* sleep remaining_us microseconds */
+	mdelay(DIV_ROUND_UP(remaining_us, 1000));
+
+	/* reacquire the spinlock */
+	spin_lock_irqsave(&dev->lock, flags);
+
+	/* now we're not transmitting anymore */
+	dev->transmitting = false;
+
+	/* and set the carrier values for reception */
+	ite_set_carrier_params(dev);
+
+	/* reenable the receiver */
+	if (dev->in_use)
+		dev->params.enable_rx(dev);
+
+	/* notify transmission end */
+	wake_up_interruptible(&dev->tx_ended);
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return ret;
+}
+
+/* idle the receiver if needed */
+static void ite_s_idle(struct rc_dev *rcdev, bool enable)
+{
+	unsigned long flags;
+	struct ite_dev *dev = rcdev->priv;
+
+	ite_dbg("%s called", __func__);
+
+	if (enable) {
+		spin_lock_irqsave(&dev->lock, flags);
+		dev->params.idle_rx(dev);
+		spin_unlock_irqrestore(&dev->lock, flags);
+	}
+}
+
+
+/* IT8712F HW-specific functions */
+
+/* retrieve a bitmask of the current causes for a pending interrupt; this may
+ * be composed of ITE_IRQ_TX_FIFO, ITE_IRQ_RX_FIFO and ITE_IRQ_RX_FIFO_OVERRUN
+ * */
+static int it87_get_irq_causes(struct ite_dev *dev)
+{
+	u8 iflags;
+	int ret = 0;
+
+	ite_dbg("%s called", __func__);
+
+	/* read the interrupt flags */
+	iflags = inb(dev->cir_addr + IT87_IIR) & IT87_II;
+
+	switch (iflags) {
+	case IT87_II_RXDS:
+		ret = ITE_IRQ_RX_FIFO;
+		break;
+	case IT87_II_RXFO:
+		ret = ITE_IRQ_RX_FIFO_OVERRUN;
+		break;
+	case IT87_II_TXLDL:
+		ret = ITE_IRQ_TX_FIFO;
+		break;
+	}
+
+	return ret;
+}
+
+/* set the carrier parameters; to be called with the spinlock held */
+static void it87_set_carrier_params(struct ite_dev *dev, bool high_freq,
+				    bool use_demodulator,
+				    u8 carrier_freq_bits, u8 allowance_bits,
+				    u8 pulse_width_bits)
+{
+	u8 val;
+
+	ite_dbg("%s called", __func__);
+
+	/* program the RCR register */
+	val = inb(dev->cir_addr + IT87_RCR)
+		& ~(IT87_HCFS | IT87_RXEND | IT87_RXDCR);
+
+	if (high_freq)
+		val |= IT87_HCFS;
+
+	if (use_demodulator)
+		val |= IT87_RXEND;
+
+	val |= allowance_bits;
+
+	outb(val, dev->cir_addr + IT87_RCR);
+
+	/* program the TCR2 register */
+	outb((carrier_freq_bits << IT87_CFQ_SHIFT) | pulse_width_bits,
+		dev->cir_addr + IT87_TCR2);
+}
+
+/* read up to buf_size bytes from the RX FIFO; to be called with the spinlock
+ * held */
+static int it87_get_rx_bytes(struct ite_dev *dev, u8 * buf, int buf_size)
+{
+	int fifo, read = 0;
+
+	ite_dbg("%s called", __func__);
+
+	/* read how many bytes are still in the FIFO */
+	fifo = inb(dev->cir_addr + IT87_RSR) & IT87_RXFBC;
+
+	while (fifo > 0 && buf_size > 0) {
+		*(buf++) = inb(dev->cir_addr + IT87_DR);
+		fifo--;
+		read++;
+		buf_size--;
+	}
+
+	return read;
+}
+
+/* return how many bytes are still in the FIFO; this will be called
+ * with the device spinlock NOT HELD while waiting for the TX FIFO to get
+ * empty; let's expect this won't be a problem */
+static int it87_get_tx_used_slots(struct ite_dev *dev)
+{
+	ite_dbg("%s called", __func__);
+
+	return inb(dev->cir_addr + IT87_TSR) & IT87_TXFBC;
+}
+
+/* put a byte to the TX fifo; this should be called with the spinlock held */
+static void it87_put_tx_byte(struct ite_dev *dev, u8 value)
+{
+	outb(value, dev->cir_addr + IT87_DR);
+}
+
+/* idle the receiver so that we won't receive samples until another
+  pulse is detected; this must be called with the device spinlock held */
+static void it87_idle_rx(struct ite_dev *dev)
+{
+	ite_dbg("%s called", __func__);
+
+	/* disable streaming by clearing RXACT writing it as 1 */
+	outb(inb(dev->cir_addr + IT87_RCR) | IT87_RXACT,
+		dev->cir_addr + IT87_RCR);
+
+	/* clear the FIFO */
+	outb(inb(dev->cir_addr + IT87_TCR1) | IT87_FIFOCLR,
+		dev->cir_addr + IT87_TCR1);
+}
+
+/* disable the receiver; this must be called with the device spinlock held */
+static void it87_disable_rx(struct ite_dev *dev)
+{
+	ite_dbg("%s called", __func__);
+
+	/* disable the receiver interrupts */
+	outb(inb(dev->cir_addr + IT87_IER) & ~(IT87_RDAIE | IT87_RFOIE),
+		dev->cir_addr + IT87_IER);
+
+	/* disable the receiver */
+	outb(inb(dev->cir_addr + IT87_RCR) & ~IT87_RXEN,
+		dev->cir_addr + IT87_RCR);
+
+	/* clear the FIFO and RXACT (actually RXACT should have been cleared
+	* in the previous outb() call) */
+	it87_idle_rx(dev);
+}
+
+/* enable the receiver; this must be called with the device spinlock held */
+static void it87_enable_rx(struct ite_dev *dev)
+{
+	ite_dbg("%s called", __func__);
+
+	/* enable the receiver by setting RXEN */
+	outb(inb(dev->cir_addr + IT87_RCR) | IT87_RXEN,
+		dev->cir_addr + IT87_RCR);
+
+	/* just prepare it to idle for the next reception */
+	it87_idle_rx(dev);
+
+	/* enable the receiver interrupts and master enable flag */
+	outb(inb(dev->cir_addr + IT87_IER) | IT87_RDAIE | IT87_RFOIE | IT87_IEC,
+		dev->cir_addr + IT87_IER);
+}
+
+/* disable the transmitter interrupt; this must be called with the device
+ * spinlock held */
+static void it87_disable_tx_interrupt(struct ite_dev *dev)
+{
+	ite_dbg("%s called", __func__);
+
+	/* disable the transmitter interrupts */
+	outb(inb(dev->cir_addr + IT87_IER) & ~IT87_TLDLIE,
+		dev->cir_addr + IT87_IER);
+}
+
+/* enable the transmitter interrupt; this must be called with the device
+ * spinlock held */
+static void it87_enable_tx_interrupt(struct ite_dev *dev)
+{
+	ite_dbg("%s called", __func__);
+
+	/* enable the transmitter interrupts and master enable flag */
+	outb(inb(dev->cir_addr + IT87_IER) | IT87_TLDLIE | IT87_IEC,
+		dev->cir_addr + IT87_IER);
+}
+
+/* disable the device; this must be called with the device spinlock held */
+static void it87_disable(struct ite_dev *dev)
+{
+	ite_dbg("%s called", __func__);
+
+	/* clear out all interrupt enable flags */
+	outb(inb(dev->cir_addr + IT87_IER) &
+		~(IT87_IEC | IT87_RFOIE | IT87_RDAIE | IT87_TLDLIE),
+		dev->cir_addr + IT87_IER);
+
+	/* disable the receiver */
+	it87_disable_rx(dev);
+
+	/* erase the FIFO */
+	outb(IT87_FIFOCLR | inb(dev->cir_addr + IT87_TCR1),
+		dev->cir_addr + IT87_TCR1);
+}
+
+/* initialize the hardware */
+static void it87_init_hardware(struct ite_dev *dev)
+{
+	ite_dbg("%s called", __func__);
+
+	/* enable just the baud rate divisor register,
+	disabling all the interrupts at the same time */
+	outb((inb(dev->cir_addr + IT87_IER) &
+		~(IT87_IEC | IT87_RFOIE | IT87_RDAIE | IT87_TLDLIE)) | IT87_BR,
+		dev->cir_addr + IT87_IER);
+
+	/* write out the baud rate divisor */
+	outb(ITE_BAUDRATE_DIVISOR & 0xff, dev->cir_addr + IT87_BDLR);
+	outb((ITE_BAUDRATE_DIVISOR >> 8) & 0xff, dev->cir_addr + IT87_BDHR);
+
+	/* disable the baud rate divisor register again */
+	outb(inb(dev->cir_addr + IT87_IER) & ~IT87_BR,
+		dev->cir_addr + IT87_IER);
+
+	/* program the RCR register defaults */
+	outb(ITE_RXDCR_DEFAULT, dev->cir_addr + IT87_RCR);
+
+	/* program the TCR1 register */
+	outb(IT87_TXMPM_DEFAULT | IT87_TXENDF | IT87_TXRLE
+		| IT87_FIFOTL_DEFAULT | IT87_FIFOCLR,
+		dev->cir_addr + IT87_TCR1);
+
+	/* program the carrier parameters */
+	ite_set_carrier_params(dev);
+}
+
+/* IT8512F on ITE8708 HW-specific functions */
+
+/* retrieve a bitmask of the current causes for a pending interrupt; this may
+ * be composed of ITE_IRQ_TX_FIFO, ITE_IRQ_RX_FIFO and ITE_IRQ_RX_FIFO_OVERRUN
+ * */
+static int it8708_get_irq_causes(struct ite_dev *dev)
+{
+	u8 iflags;
+	int ret = 0;
+
+	ite_dbg("%s called", __func__);
+
+	/* read the interrupt flags */
+	iflags = inb(dev->cir_addr + IT8708_C0IIR);
+
+	if (iflags & IT85_TLDLI)
+		ret |= ITE_IRQ_TX_FIFO;
+	if (iflags & IT85_RDAI)
+		ret |= ITE_IRQ_RX_FIFO;
+	if (iflags & IT85_RFOI)
+		ret |= ITE_IRQ_RX_FIFO_OVERRUN;
+
+	return ret;
+}
+
+/* set the carrier parameters; to be called with the spinlock held */
+static void it8708_set_carrier_params(struct ite_dev *dev, bool high_freq,
+				      bool use_demodulator,
+				      u8 carrier_freq_bits, u8 allowance_bits,
+				      u8 pulse_width_bits)
+{
+	u8 val;
+
+	ite_dbg("%s called", __func__);
+
+	/* program the C0CFR register, with HRAE=1 */
+	outb(inb(dev->cir_addr + IT8708_BANKSEL) | IT8708_HRAE,
+		dev->cir_addr + IT8708_BANKSEL);
+
+	val = (inb(dev->cir_addr + IT8708_C0CFR)
+		& ~(IT85_HCFS | IT85_CFQ)) | carrier_freq_bits;
+
+	if (high_freq)
+		val |= IT85_HCFS;
+
+	outb(val, dev->cir_addr + IT8708_C0CFR);
+
+	outb(inb(dev->cir_addr + IT8708_BANKSEL) & ~IT8708_HRAE,
+		   dev->cir_addr + IT8708_BANKSEL);
+
+	/* program the C0RCR register */
+	val = inb(dev->cir_addr + IT8708_C0RCR)
+		& ~(IT85_RXEND | IT85_RXDCR);
+
+	if (use_demodulator)
+		val |= IT85_RXEND;
+
+	val |= allowance_bits;
+
+	outb(val, dev->cir_addr + IT8708_C0RCR);
+
+	/* program the C0TCR register */
+	val = inb(dev->cir_addr + IT8708_C0TCR) & ~IT85_TXMPW;
+	val |= pulse_width_bits;
+	outb(val, dev->cir_addr + IT8708_C0TCR);
+}
+
+/* read up to buf_size bytes from the RX FIFO; to be called with the spinlock
+ * held */
+static int it8708_get_rx_bytes(struct ite_dev *dev, u8 * buf, int buf_size)
+{
+	int fifo, read = 0;
+
+	ite_dbg("%s called", __func__);
+
+	/* read how many bytes are still in the FIFO */
+	fifo = inb(dev->cir_addr + IT8708_C0RFSR) & IT85_RXFBC;
+
+	while (fifo > 0 && buf_size > 0) {
+		*(buf++) = inb(dev->cir_addr + IT8708_C0DR);
+		fifo--;
+		read++;
+		buf_size--;
+	}
+
+	return read;
+}
+
+/* return how many bytes are still in the FIFO; this will be called
+ * with the device spinlock NOT HELD while waiting for the TX FIFO to get
+ * empty; let's expect this won't be a problem */
+static int it8708_get_tx_used_slots(struct ite_dev *dev)
+{
+	ite_dbg("%s called", __func__);
+
+	return inb(dev->cir_addr + IT8708_C0TFSR) & IT85_TXFBC;
+}
+
+/* put a byte to the TX fifo; this should be called with the spinlock held */
+static void it8708_put_tx_byte(struct ite_dev *dev, u8 value)
+{
+	outb(value, dev->cir_addr + IT8708_C0DR);
+}
+
+/* idle the receiver so that we won't receive samples until another
+  pulse is detected; this must be called with the device spinlock held */
+static void it8708_idle_rx(struct ite_dev *dev)
+{
+	ite_dbg("%s called", __func__);
+
+	/* disable streaming by clearing RXACT writing it as 1 */
+	outb(inb(dev->cir_addr + IT8708_C0RCR) | IT85_RXACT,
+		dev->cir_addr + IT8708_C0RCR);
+
+	/* clear the FIFO */
+	outb(inb(dev->cir_addr + IT8708_C0MSTCR) | IT85_FIFOCLR,
+		dev->cir_addr + IT8708_C0MSTCR);
+}
+
+/* disable the receiver; this must be called with the device spinlock held */
+static void it8708_disable_rx(struct ite_dev *dev)
+{
+	ite_dbg("%s called", __func__);
+
+	/* disable the receiver interrupts */
+	outb(inb(dev->cir_addr + IT8708_C0IER) &
+		~(IT85_RDAIE | IT85_RFOIE),
+		dev->cir_addr + IT8708_C0IER);
+
+	/* disable the receiver */
+	outb(inb(dev->cir_addr + IT8708_C0RCR) & ~IT85_RXEN,
+		dev->cir_addr + IT8708_C0RCR);
+
+	/* clear the FIFO and RXACT (actually RXACT should have been cleared
+	 * in the previous outb() call) */
+	it8708_idle_rx(dev);
+}
+
+/* enable the receiver; this must be called with the device spinlock held */
+static void it8708_enable_rx(struct ite_dev *dev)
+{
+	ite_dbg("%s called", __func__);
+
+	/* enable the receiver by setting RXEN */
+	outb(inb(dev->cir_addr + IT8708_C0RCR) | IT85_RXEN,
+		dev->cir_addr + IT8708_C0RCR);
+
+	/* just prepare it to idle for the next reception */
+	it8708_idle_rx(dev);
+
+	/* enable the receiver interrupts and master enable flag */
+	outb(inb(dev->cir_addr + IT8708_C0IER)
+		|IT85_RDAIE | IT85_RFOIE | IT85_IEC,
+		dev->cir_addr + IT8708_C0IER);
+}
+
+/* disable the transmitter interrupt; this must be called with the device
+ * spinlock held */
+static void it8708_disable_tx_interrupt(struct ite_dev *dev)
+{
+	ite_dbg("%s called", __func__);
+
+	/* disable the transmitter interrupts */
+	outb(inb(dev->cir_addr + IT8708_C0IER) & ~IT85_TLDLIE,
+		dev->cir_addr + IT8708_C0IER);
+}
+
+/* enable the transmitter interrupt; this must be called with the device
+ * spinlock held */
+static void it8708_enable_tx_interrupt(struct ite_dev *dev)
+{
+	ite_dbg("%s called", __func__);
+
+	/* enable the transmitter interrupts and master enable flag */
+	outb(inb(dev->cir_addr + IT8708_C0IER)
+		|IT85_TLDLIE | IT85_IEC,
+		dev->cir_addr + IT8708_C0IER);
+}
+
+/* disable the device; this must be called with the device spinlock held */
+static void it8708_disable(struct ite_dev *dev)
+{
+	ite_dbg("%s called", __func__);
+
+	/* clear out all interrupt enable flags */
+	outb(inb(dev->cir_addr + IT8708_C0IER) &
+		~(IT85_IEC | IT85_RFOIE | IT85_RDAIE | IT85_TLDLIE),
+		dev->cir_addr + IT8708_C0IER);
+
+	/* disable the receiver */
+	it8708_disable_rx(dev);
+
+	/* erase the FIFO */
+	outb(IT85_FIFOCLR | inb(dev->cir_addr + IT8708_C0MSTCR),
+		dev->cir_addr + IT8708_C0MSTCR);
+}
+
+/* initialize the hardware */
+static void it8708_init_hardware(struct ite_dev *dev)
+{
+	ite_dbg("%s called", __func__);
+
+	/* disable all the interrupts */
+	outb(inb(dev->cir_addr + IT8708_C0IER) &
+		~(IT85_IEC | IT85_RFOIE | IT85_RDAIE | IT85_TLDLIE),
+		dev->cir_addr + IT8708_C0IER);
+
+	/* program the baud rate divisor */
+	outb(inb(dev->cir_addr + IT8708_BANKSEL) | IT8708_HRAE,
+		dev->cir_addr + IT8708_BANKSEL);
+
+	outb(ITE_BAUDRATE_DIVISOR & 0xff, dev->cir_addr + IT8708_C0BDLR);
+	outb((ITE_BAUDRATE_DIVISOR >> 8) & 0xff,
+		   dev->cir_addr + IT8708_C0BDHR);
+
+	outb(inb(dev->cir_addr + IT8708_BANKSEL) & ~IT8708_HRAE,
+		   dev->cir_addr + IT8708_BANKSEL);
+
+	/* program the C0MSTCR register defaults */
+	outb((inb(dev->cir_addr + IT8708_C0MSTCR) &
+			~(IT85_ILSEL | IT85_ILE | IT85_FIFOTL |
+			  IT85_FIFOCLR | IT85_RESET)) |
+		       IT85_FIFOTL_DEFAULT,
+		       dev->cir_addr + IT8708_C0MSTCR);
+
+	/* program the C0RCR register defaults */
+	outb((inb(dev->cir_addr + IT8708_C0RCR) &
+			~(IT85_RXEN | IT85_RDWOS | IT85_RXEND |
+			  IT85_RXACT | IT85_RXDCR)) |
+		       ITE_RXDCR_DEFAULT,
+		       dev->cir_addr + IT8708_C0RCR);
+
+	/* program the C0TCR register defaults */
+	outb((inb(dev->cir_addr + IT8708_C0TCR) &
+			~(IT85_TXMPM | IT85_TXMPW))
+		       |IT85_TXRLE | IT85_TXENDF |
+		       IT85_TXMPM_DEFAULT | IT85_TXMPW_DEFAULT,
+		       dev->cir_addr + IT8708_C0TCR);
+
+	/* program the carrier parameters */
+	ite_set_carrier_params(dev);
+}
+
+/* IT8512F on ITE8709 HW-specific functions */
+
+/* read a byte from the SRAM module */
+static inline u8 it8709_rm(struct ite_dev *dev, int index)
+{
+	outb(index, dev->cir_addr + IT8709_RAM_IDX);
+	return inb(dev->cir_addr + IT8709_RAM_VAL);
+}
+
+/* write a byte to the SRAM module */
+static inline void it8709_wm(struct ite_dev *dev, u8 val, int index)
+{
+	outb(index, dev->cir_addr + IT8709_RAM_IDX);
+	outb(val, dev->cir_addr + IT8709_RAM_VAL);
+}
+
+static void it8709_wait(struct ite_dev *dev)
+{
+	int i = 0;
+	/*
+	 * loop until device tells it's ready to continue
+	 * iterations count is usually ~750 but can sometimes achieve 13000
+	 */
+	for (i = 0; i < 15000; i++) {
+		udelay(2);
+		if (it8709_rm(dev, IT8709_MODE) == IT8709_IDLE)
+			break;
+	}
+}
+
+/* read the value of a CIR register */
+static u8 it8709_rr(struct ite_dev *dev, int index)
+{
+	/* just wait in case the previous access was a write */
+	it8709_wait(dev);
+	it8709_wm(dev, index, IT8709_REG_IDX);
+	it8709_wm(dev, IT8709_READ, IT8709_MODE);
+
+	/* wait for the read data to be available */
+	it8709_wait(dev);
+
+	/* return the read value */
+	return it8709_rm(dev, IT8709_REG_VAL);
+}
+
+/* write the value of a CIR register */
+static void it8709_wr(struct ite_dev *dev, u8 val, int index)
+{
+	/* we wait before writing, and not afterwards, since this allows us to
+	 * pipeline the host CPU with the microcontroller */
+	it8709_wait(dev);
+	it8709_wm(dev, val, IT8709_REG_VAL);
+	it8709_wm(dev, index, IT8709_REG_IDX);
+	it8709_wm(dev, IT8709_WRITE, IT8709_MODE);
+}
+
+/* retrieve a bitmask of the current causes for a pending interrupt; this may
+ * be composed of ITE_IRQ_TX_FIFO, ITE_IRQ_RX_FIFO and ITE_IRQ_RX_FIFO_OVERRUN
+ * */
+static int it8709_get_irq_causes(struct ite_dev *dev)
+{
+	u8 iflags;
+	int ret = 0;
+
+	ite_dbg("%s called", __func__);
+
+	/* read the interrupt flags */
+	iflags = it8709_rm(dev, IT8709_IIR);
+
+	if (iflags & IT85_TLDLI)
+		ret |= ITE_IRQ_TX_FIFO;
+	if (iflags & IT85_RDAI)
+		ret |= ITE_IRQ_RX_FIFO;
+	if (iflags & IT85_RFOI)
+		ret |= ITE_IRQ_RX_FIFO_OVERRUN;
+
+	return ret;
+}
+
+/* set the carrier parameters; to be called with the spinlock held */
+static void it8709_set_carrier_params(struct ite_dev *dev, bool high_freq,
+				      bool use_demodulator,
+				      u8 carrier_freq_bits, u8 allowance_bits,
+				      u8 pulse_width_bits)
+{
+	u8 val;
+
+	ite_dbg("%s called", __func__);
+
+	val = (it8709_rr(dev, IT85_C0CFR)
+		     &~(IT85_HCFS | IT85_CFQ)) |
+	    carrier_freq_bits;
+
+	if (high_freq)
+		val |= IT85_HCFS;
+
+	it8709_wr(dev, val, IT85_C0CFR);
+
+	/* program the C0RCR register */
+	val = it8709_rr(dev, IT85_C0RCR)
+		& ~(IT85_RXEND | IT85_RXDCR);
+
+	if (use_demodulator)
+		val |= IT85_RXEND;
+
+	val |= allowance_bits;
+
+	it8709_wr(dev, val, IT85_C0RCR);
+
+	/* program the C0TCR register */
+	val = it8709_rr(dev, IT85_C0TCR) & ~IT85_TXMPW;
+	val |= pulse_width_bits;
+	it8709_wr(dev, val, IT85_C0TCR);
+}
+
+/* read up to buf_size bytes from the RX FIFO; to be called with the spinlock
+ * held */
+static int it8709_get_rx_bytes(struct ite_dev *dev, u8 * buf, int buf_size)
+{
+	int fifo, read = 0;
+
+	ite_dbg("%s called", __func__);
+
+	/* read how many bytes are still in the FIFO */
+	fifo = it8709_rm(dev, IT8709_RFSR) & IT85_RXFBC;
+
+	while (fifo > 0 && buf_size > 0) {
+		*(buf++) = it8709_rm(dev, IT8709_FIFO + read);
+		fifo--;
+		read++;
+		buf_size--;
+	}
+
+	/* 'clear' the FIFO by setting the writing index to 0; this is
+	 * completely bound to be racy, but we can't help it, since it's a
+	 * limitation of the protocol */
+	it8709_wm(dev, 0, IT8709_RFSR);
+
+	return read;
+}
+
+/* return how many bytes are still in the FIFO; this will be called
+ * with the device spinlock NOT HELD while waiting for the TX FIFO to get
+ * empty; let's expect this won't be a problem */
+static int it8709_get_tx_used_slots(struct ite_dev *dev)
+{
+	ite_dbg("%s called", __func__);
+
+	return it8709_rr(dev, IT85_C0TFSR) & IT85_TXFBC;
+}
+
+/* put a byte to the TX fifo; this should be called with the spinlock held */
+static void it8709_put_tx_byte(struct ite_dev *dev, u8 value)
+{
+	it8709_wr(dev, value, IT85_C0DR);
+}
+
+/* idle the receiver so that we won't receive samples until another
+  pulse is detected; this must be called with the device spinlock held */
+static void it8709_idle_rx(struct ite_dev *dev)
+{
+	ite_dbg("%s called", __func__);
+
+	/* disable streaming by clearing RXACT writing it as 1 */
+	it8709_wr(dev, it8709_rr(dev, IT85_C0RCR) | IT85_RXACT,
+			    IT85_C0RCR);
+
+	/* clear the FIFO */
+	it8709_wr(dev, it8709_rr(dev, IT85_C0MSTCR) | IT85_FIFOCLR,
+			    IT85_C0MSTCR);
+}
+
+/* disable the receiver; this must be called with the device spinlock held */
+static void it8709_disable_rx(struct ite_dev *dev)
+{
+	ite_dbg("%s called", __func__);
+
+	/* disable the receiver interrupts */
+	it8709_wr(dev, it8709_rr(dev, IT85_C0IER) &
+			    ~(IT85_RDAIE | IT85_RFOIE),
+			    IT85_C0IER);
+
+	/* disable the receiver */
+	it8709_wr(dev, it8709_rr(dev, IT85_C0RCR) & ~IT85_RXEN,
+			    IT85_C0RCR);
+
+	/* clear the FIFO and RXACT (actually RXACT should have been cleared
+	 * in the previous it8709_wr(dev, ) call) */
+	it8709_idle_rx(dev);
+}
+
+/* enable the receiver; this must be called with the device spinlock held */
+static void it8709_enable_rx(struct ite_dev *dev)
+{
+	ite_dbg("%s called", __func__);
+
+	/* enable the receiver by setting RXEN */
+	it8709_wr(dev, it8709_rr(dev, IT85_C0RCR) | IT85_RXEN,
+			    IT85_C0RCR);
+
+	/* just prepare it to idle for the next reception */
+	it8709_idle_rx(dev);
+
+	/* enable the receiver interrupts and master enable flag */
+	it8709_wr(dev, it8709_rr(dev, IT85_C0IER)
+			    |IT85_RDAIE | IT85_RFOIE | IT85_IEC,
+			    IT85_C0IER);
+}
+
+/* disable the transmitter interrupt; this must be called with the device
+ * spinlock held */
+static void it8709_disable_tx_interrupt(struct ite_dev *dev)
+{
+	ite_dbg("%s called", __func__);
+
+	/* disable the transmitter interrupts */
+	it8709_wr(dev, it8709_rr(dev, IT85_C0IER) & ~IT85_TLDLIE,
+			    IT85_C0IER);
+}
+
+/* enable the transmitter interrupt; this must be called with the device
+ * spinlock held */
+static void it8709_enable_tx_interrupt(struct ite_dev *dev)
+{
+	ite_dbg("%s called", __func__);
+
+	/* enable the transmitter interrupts and master enable flag */
+	it8709_wr(dev, it8709_rr(dev, IT85_C0IER)
+			    |IT85_TLDLIE | IT85_IEC,
+			    IT85_C0IER);
+}
+
+/* disable the device; this must be called with the device spinlock held */
+static void it8709_disable(struct ite_dev *dev)
+{
+	ite_dbg("%s called", __func__);
+
+	/* clear out all interrupt enable flags */
+	it8709_wr(dev,
+			    it8709_rr(dev,
+				      IT85_C0IER) & ~(IT85_IEC | IT85_RFOIE |
+						      IT85_RDAIE |
+						      IT85_TLDLIE), IT85_C0IER);
+
+	/* disable the receiver */
+	it8709_disable_rx(dev);
+
+	/* erase the FIFO */
+	it8709_wr(dev, IT85_FIFOCLR | it8709_rr(dev, IT85_C0MSTCR),
+			    IT85_C0MSTCR);
+}
+
+/* initialize the hardware */
+static void it8709_init_hardware(struct ite_dev *dev)
+{
+	ite_dbg("%s called", __func__);
+
+	/* disable all the interrupts */
+	it8709_wr(dev,
+			    it8709_rr(dev,
+				      IT85_C0IER) & ~(IT85_IEC | IT85_RFOIE |
+						      IT85_RDAIE |
+						      IT85_TLDLIE), IT85_C0IER);
+
+	/* program the baud rate divisor */
+	it8709_wr(dev, ITE_BAUDRATE_DIVISOR & 0xff, IT85_C0BDLR);
+	it8709_wr(dev, (ITE_BAUDRATE_DIVISOR >> 8) & 0xff,
+			IT85_C0BDHR);
+
+	/* program the C0MSTCR register defaults */
+	it8709_wr(dev, (it8709_rr(dev, IT85_C0MSTCR) & ~(IT85_ILSEL |
+								   IT85_ILE
+								   | IT85_FIFOTL
+								   |
+								   IT85_FIFOCLR
+								   |
+								   IT85_RESET))
+			    | IT85_FIFOTL_DEFAULT, IT85_C0MSTCR);
+
+	/* program the C0RCR register defaults */
+	it8709_wr(dev,
+			    (it8709_rr(dev, IT85_C0RCR) &
+			     ~(IT85_RXEN | IT85_RDWOS | IT85_RXEND
+			       | IT85_RXACT | IT85_RXDCR)) |
+			    ITE_RXDCR_DEFAULT, IT85_C0RCR);
+
+	/* program the C0TCR register defaults */
+	it8709_wr(dev, (it8709_rr(dev, IT85_C0TCR)
+				  &~(IT85_TXMPM | IT85_TXMPW))
+			    |IT85_TXRLE | IT85_TXENDF |
+			    IT85_TXMPM_DEFAULT |
+			    IT85_TXMPW_DEFAULT, IT85_C0TCR);
+
+	/* program the carrier parameters */
+	ite_set_carrier_params(dev);
+}
+
+
+/* generic hardware setup/teardown code */
+
+/* activate the device for use */
+static int ite_open(struct rc_dev *rcdev)
+{
+	struct ite_dev *dev = rcdev->priv;
+	unsigned long flags;
+
+	ite_dbg("%s called", __func__);
+
+	spin_lock_irqsave(&dev->lock, flags);
+	dev->in_use = true;
+
+	/* enable the receiver */
+	dev->params.enable_rx(dev);
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return 0;
+}
+
+/* deactivate the device for use */
+static void ite_close(struct rc_dev *rcdev)
+{
+	struct ite_dev *dev = rcdev->priv;
+	unsigned long flags;
+
+	ite_dbg("%s called", __func__);
+
+	spin_lock_irqsave(&dev->lock, flags);
+	dev->in_use = false;
+
+	/* wait for any transmission to end */
+	spin_unlock_irqrestore(&dev->lock, flags);
+	wait_event_interruptible(dev->tx_ended, !dev->transmitting);
+	spin_lock_irqsave(&dev->lock, flags);
+
+	dev->params.disable(dev);
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+}
+
+/* supported models and their parameters */
+static const struct ite_dev_params ite_dev_descs[] = {
+	{	/* 0: ITE8704 */
+	       .model = "ITE8704 CIR transceiver",
+	       .io_region_size = IT87_IOREG_LENGTH,
+	       .hw_tx_capable = true,
+	       .sample_period = (u32) (1000000000ULL / 115200),
+	       .tx_carrier_freq = 38000,
+	       .tx_duty_cycle = 33,
+	       .rx_low_carrier_freq = 0,
+	       .rx_high_carrier_freq = 0,
+
+		/* operations */
+	       .get_irq_causes = it87_get_irq_causes,
+	       .enable_rx = it87_enable_rx,
+	       .idle_rx = it87_idle_rx,
+	       .disable_rx = it87_idle_rx,
+	       .get_rx_bytes = it87_get_rx_bytes,
+	       .enable_tx_interrupt = it87_enable_tx_interrupt,
+	       .disable_tx_interrupt = it87_disable_tx_interrupt,
+	       .get_tx_used_slots = it87_get_tx_used_slots,
+	       .put_tx_byte = it87_put_tx_byte,
+	       .disable = it87_disable,
+	       .init_hardware = it87_init_hardware,
+	       .set_carrier_params = it87_set_carrier_params,
+	       },
+	{	/* 1: ITE8713 */
+	       .model = "ITE8713 CIR transceiver",
+	       .io_region_size = IT87_IOREG_LENGTH,
+	       .hw_tx_capable = true,
+	       .sample_period = (u32) (1000000000ULL / 115200),
+	       .tx_carrier_freq = 38000,
+	       .tx_duty_cycle = 33,
+	       .rx_low_carrier_freq = 0,
+	       .rx_high_carrier_freq = 0,
+
+		/* operations */
+	       .get_irq_causes = it87_get_irq_causes,
+	       .enable_rx = it87_enable_rx,
+	       .idle_rx = it87_idle_rx,
+	       .disable_rx = it87_idle_rx,
+	       .get_rx_bytes = it87_get_rx_bytes,
+	       .enable_tx_interrupt = it87_enable_tx_interrupt,
+	       .disable_tx_interrupt = it87_disable_tx_interrupt,
+	       .get_tx_used_slots = it87_get_tx_used_slots,
+	       .put_tx_byte = it87_put_tx_byte,
+	       .disable = it87_disable,
+	       .init_hardware = it87_init_hardware,
+	       .set_carrier_params = it87_set_carrier_params,
+	       },
+	{	/* 2: ITE8708 */
+	       .model = "ITE8708 CIR transceiver",
+	       .io_region_size = IT8708_IOREG_LENGTH,
+	       .hw_tx_capable = true,
+	       .sample_period = (u32) (1000000000ULL / 115200),
+	       .tx_carrier_freq = 38000,
+	       .tx_duty_cycle = 33,
+	       .rx_low_carrier_freq = 0,
+	       .rx_high_carrier_freq = 0,
+
+		/* operations */
+	       .get_irq_causes = it8708_get_irq_causes,
+	       .enable_rx = it8708_enable_rx,
+	       .idle_rx = it8708_idle_rx,
+	       .disable_rx = it8708_idle_rx,
+	       .get_rx_bytes = it8708_get_rx_bytes,
+	       .enable_tx_interrupt = it8708_enable_tx_interrupt,
+	       .disable_tx_interrupt =
+	       it8708_disable_tx_interrupt,
+	       .get_tx_used_slots = it8708_get_tx_used_slots,
+	       .put_tx_byte = it8708_put_tx_byte,
+	       .disable = it8708_disable,
+	       .init_hardware = it8708_init_hardware,
+	       .set_carrier_params = it8708_set_carrier_params,
+	       },
+	{	/* 3: ITE8709 */
+	       .model = "ITE8709 CIR transceiver",
+	       .io_region_size = IT8709_IOREG_LENGTH,
+	       .hw_tx_capable = true,
+	       .sample_period = (u32) (1000000000ULL / 115200),
+	       .tx_carrier_freq = 38000,
+	       .tx_duty_cycle = 33,
+	       .rx_low_carrier_freq = 0,
+	       .rx_high_carrier_freq = 0,
+
+		/* operations */
+	       .get_irq_causes = it8709_get_irq_causes,
+	       .enable_rx = it8709_enable_rx,
+	       .idle_rx = it8709_idle_rx,
+	       .disable_rx = it8709_idle_rx,
+	       .get_rx_bytes = it8709_get_rx_bytes,
+	       .enable_tx_interrupt = it8709_enable_tx_interrupt,
+	       .disable_tx_interrupt =
+	       it8709_disable_tx_interrupt,
+	       .get_tx_used_slots = it8709_get_tx_used_slots,
+	       .put_tx_byte = it8709_put_tx_byte,
+	       .disable = it8709_disable,
+	       .init_hardware = it8709_init_hardware,
+	       .set_carrier_params = it8709_set_carrier_params,
+	       },
+};
+
+static const struct pnp_device_id ite_ids[] = {
+	{"ITE8704", 0},		/* Default model */
+	{"ITE8713", 1},		/* CIR found in EEEBox 1501U */
+	{"ITE8708", 2},		/* Bridged IT8512 */
+	{"ITE8709", 3},		/* SRAM-Bridged IT8512 */
+	{"", 0},
+};
+
+/* allocate memory, probe hardware, and initialize everything */
+static int ite_probe(struct pnp_dev *pdev, const struct pnp_device_id
+		     *dev_id)
+{
+	const struct ite_dev_params *dev_desc = NULL;
+	struct ite_dev *itdev = NULL;
+	struct rc_dev *rdev = NULL;
+	int ret = -ENOMEM;
+	int model_no;
+
+	ite_dbg("%s called", __func__);
+
+	itdev = kzalloc(sizeof(struct ite_dev), GFP_KERNEL);
+	if (!itdev)
+		return ret;
+
+	/* input device for IR remote (and tx) */
+	rdev = rc_allocate_device();
+	if (!rdev)
+		goto failure;
+
+	ret = -ENODEV;
+
+	/* get the model number */
+	model_no = (int)dev_id->driver_data;
+	ite_pr(KERN_NOTICE, "Auto-detected model: %s\n",
+		ite_dev_descs[model_no].model);
+
+	if (model_number >= 0 && model_number < ARRAY_SIZE(ite_dev_descs)) {
+		model_no = model_number;
+		ite_pr(KERN_NOTICE, "The model has been fixed by a module "
+			"parameter.");
+	}
+
+	ite_pr(KERN_NOTICE, "Using model: %s\n", ite_dev_descs[model_no].model);
+
+	/* get the description for the device */
+	dev_desc = &ite_dev_descs[model_no];
+
+	/* validate pnp resources */
+	if (!pnp_port_valid(pdev, 0) ||
+	    pnp_port_len(pdev, 0) != dev_desc->io_region_size) {
+		dev_err(&pdev->dev, "IR PNP Port not valid!\n");
+		goto failure;
+	}
+
+	if (!pnp_irq_valid(pdev, 0)) {
+		dev_err(&pdev->dev, "PNP IRQ not valid!\n");
+		goto failure;
+	}
+
+	/* store resource values */
+	itdev->cir_addr = pnp_port_start(pdev, 0);
+	itdev->cir_irq = pnp_irq(pdev, 0);
+
+	/* initialize spinlocks */
+	spin_lock_init(&itdev->lock);
+
+	/* initialize raw event */
+	init_ir_raw_event(&itdev->rawir);
+
+	ret = -EBUSY;
+	/* now claim resources */
+	if (!request_region(itdev->cir_addr,
+				dev_desc->io_region_size, ITE_DRIVER_NAME))
+		goto failure;
+
+	if (request_irq(itdev->cir_irq, ite_cir_isr, IRQF_SHARED,
+			ITE_DRIVER_NAME, (void *)itdev))
+		goto failure;
+
+	/* set driver data into the pnp device */
+	pnp_set_drvdata(pdev, itdev);
+	itdev->pdev = pdev;
+
+	/* initialize waitqueues for transmission */
+	init_waitqueue_head(&itdev->tx_queue);
+	init_waitqueue_head(&itdev->tx_ended);
+
+	/* copy model-specific parameters */
+	itdev->params = *dev_desc;
+
+	/* apply any overrides */
+	if (sample_period > 0)
+		itdev->params.sample_period = sample_period;
+
+	if (tx_carrier_freq > 0)
+		itdev->params.tx_carrier_freq = tx_carrier_freq;
+
+	if (tx_duty_cycle > 0 && tx_duty_cycle <= 100)
+		itdev->params.tx_duty_cycle = tx_duty_cycle;
+
+	if (rx_low_carrier_freq > 0)
+		itdev->params.rx_low_carrier_freq = rx_low_carrier_freq;
+
+	if (rx_high_carrier_freq > 0)
+		itdev->params.rx_high_carrier_freq = rx_high_carrier_freq;
+
+	/* print out parameters */
+	ite_pr(KERN_NOTICE, "TX-capable: %d\n", (int)
+			 itdev->params.hw_tx_capable);
+	ite_pr(KERN_NOTICE, "Sample period (ns): %ld\n", (long)
+		     itdev->params.sample_period);
+	ite_pr(KERN_NOTICE, "TX carrier frequency (Hz): %d\n", (int)
+		     itdev->params.tx_carrier_freq);
+	ite_pr(KERN_NOTICE, "TX duty cycle (%%): %d\n", (int)
+		     itdev->params.tx_duty_cycle);
+	ite_pr(KERN_NOTICE, "RX low carrier frequency (Hz): %d\n", (int)
+		     itdev->params.rx_low_carrier_freq);
+	ite_pr(KERN_NOTICE, "RX high carrier frequency (Hz): %d\n", (int)
+		     itdev->params.rx_high_carrier_freq);
+
+	/* set up hardware initial state */
+	itdev->params.init_hardware(itdev);
+
+	/* set up ir-core props */
+	rdev->priv = itdev;
+	rdev->driver_type = RC_DRIVER_IR_RAW;
+	rdev->allowed_protos = RC_TYPE_ALL;
+	rdev->open = ite_open;
+	rdev->close = ite_close;
+	rdev->s_idle = ite_s_idle;
+	rdev->s_rx_carrier_range = ite_set_rx_carrier_range;
+	rdev->min_timeout = ITE_MIN_IDLE_TIMEOUT;
+	rdev->max_timeout = ITE_MAX_IDLE_TIMEOUT;
+	rdev->timeout = ITE_IDLE_TIMEOUT;
+	rdev->rx_resolution = ITE_BAUDRATE_DIVISOR *
+				itdev->params.sample_period;
+	rdev->tx_resolution = ITE_BAUDRATE_DIVISOR *
+				itdev->params.sample_period;
+
+	/* set up transmitter related values if needed */
+	if (itdev->params.hw_tx_capable) {
+		rdev->tx_ir = ite_tx_ir;
+		rdev->s_tx_carrier = ite_set_tx_carrier;
+		rdev->s_tx_duty_cycle = ite_set_tx_duty_cycle;
+	}
+
+	rdev->input_name = dev_desc->model;
+	rdev->input_id.bustype = BUS_HOST;
+	rdev->input_id.vendor = PCI_VENDOR_ID_ITE;
+	rdev->input_id.product = 0;
+	rdev->input_id.version = 0;
+	rdev->driver_name = ITE_DRIVER_NAME;
+	rdev->map_name = RC_MAP_RC6_MCE;
+
+	ret = rc_register_device(rdev);
+	if (ret)
+		goto failure;
+
+	itdev->rdev = rdev;
+	ite_pr(KERN_NOTICE, "driver has been successfully loaded\n");
+
+	return 0;
+
+failure:
+	if (itdev->cir_irq)
+		free_irq(itdev->cir_irq, itdev);
+
+	if (itdev->cir_addr)
+		release_region(itdev->cir_addr, itdev->params.io_region_size);
+
+	rc_free_device(rdev);
+	kfree(itdev);
+
+	return ret;
+}
+
+static void __devexit ite_remove(struct pnp_dev *pdev)
+{
+	struct ite_dev *dev = pnp_get_drvdata(pdev);
+	unsigned long flags;
+
+	ite_dbg("%s called", __func__);
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	/* disable hardware */
+	dev->params.disable(dev);
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	/* free resources */
+	free_irq(dev->cir_irq, dev);
+	release_region(dev->cir_addr, dev->params.io_region_size);
+
+	rc_unregister_device(dev->rdev);
+
+	kfree(dev);
+}
+
+static int ite_suspend(struct pnp_dev *pdev, pm_message_t state)
+{
+	struct ite_dev *dev = pnp_get_drvdata(pdev);
+	unsigned long flags;
+
+	ite_dbg("%s called", __func__);
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	/* disable all interrupts */
+	dev->params.disable(dev);
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return 0;
+}
+
+static int ite_resume(struct pnp_dev *pdev)
+{
+	int ret = 0;
+	struct ite_dev *dev = pnp_get_drvdata(pdev);
+	unsigned long flags;
+
+	ite_dbg("%s called", __func__);
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	if (dev->transmitting) {
+		/* wake up the transmitter */
+		wake_up_interruptible(&dev->tx_queue);
+	} else {
+		/* enable the receiver */
+		dev->params.enable_rx(dev);
+	}
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return ret;
+}
+
+static void ite_shutdown(struct pnp_dev *pdev)
+{
+	struct ite_dev *dev = pnp_get_drvdata(pdev);
+	unsigned long flags;
+
+	ite_dbg("%s called", __func__);
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	/* disable all interrupts */
+	dev->params.disable(dev);
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+}
+
+static struct pnp_driver ite_driver = {
+	.name		= ITE_DRIVER_NAME,
+	.id_table	= ite_ids,
+	.probe		= ite_probe,
+	.remove		= __devexit_p(ite_remove),
+	.suspend	= ite_suspend,
+	.resume		= ite_resume,
+	.shutdown	= ite_shutdown,
+};
+
+int ite_init(void)
+{
+	return pnp_register_driver(&ite_driver);
+}
+
+void ite_exit(void)
+{
+	pnp_unregister_driver(&ite_driver);
+}
+
+MODULE_DEVICE_TABLE(pnp, ite_ids);
+MODULE_DESCRIPTION("ITE Tech Inc. IT8712F/ITE8512F CIR driver");
+
+MODULE_AUTHOR("Juan J. Garcia de Soria <skandalfo@gmail.com>");
+MODULE_LICENSE("GPL");
+
+module_init(ite_init);
+module_exit(ite_exit);
diff --git a/drivers/media/rc/ite-cir.h b/drivers/media/rc/ite-cir.h
new file mode 100644
index 0000000..16a19f5
--- /dev/null
+++ b/drivers/media/rc/ite-cir.h
@@ -0,0 +1,481 @@
+/*
+ * Driver for ITE Tech Inc. IT8712F/IT8512F CIR
+ *
+ * Copyright (C) 2010 Juan Jesús García de Soria <skandalfo@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA.
+ */
+
+/* platform driver name to register */
+#define ITE_DRIVER_NAME "ite-cir"
+
+/* logging macros */
+#define ite_pr(level, text, ...) \
+	printk(level KBUILD_MODNAME ": " text, ## __VA_ARGS__)
+#define ite_dbg(text, ...) do { \
+	if (debug) \
+		printk(KERN_DEBUG \
+			KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__); \
+} while (0)
+
+#define ite_dbg_verbose(text, ...) do {\
+	if (debug > 1) \
+		printk(KERN_DEBUG \
+			KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__); \
+} while (0)
+
+/* FIFO sizes */
+#define ITE_TX_FIFO_LEN 32
+#define ITE_RX_FIFO_LEN 32
+
+/* interrupt types */
+#define ITE_IRQ_TX_FIFO        1
+#define ITE_IRQ_RX_FIFO        2
+#define ITE_IRQ_RX_FIFO_OVERRUN    4
+
+/* forward declaration */
+struct ite_dev;
+
+/* struct for storing the parameters of different recognized devices */
+struct ite_dev_params {
+	/* model of the device */
+	const char *model;
+
+	/* size of the I/O region */
+	int io_region_size;
+
+	/* true if the hardware supports transmission */
+	bool hw_tx_capable;
+
+	/* base sampling period, in ns */
+	u32 sample_period;
+
+	/* rx low carrier frequency, in Hz, 0 means no demodulation */
+	unsigned int rx_low_carrier_freq;
+
+	/* tx high carrier frequency, in Hz, 0 means no demodulation */
+	unsigned int rx_high_carrier_freq;
+
+	/* tx carrier frequency, in Hz */
+	unsigned int tx_carrier_freq;
+
+	/* duty cycle, 0-100 */
+	int tx_duty_cycle;
+
+	/* hw-specific operation function pointers; most of these must be
+	 * called while holding the spin lock, except for the TX FIFO length
+	 * one */
+	/* get pending interrupt causes */
+	int (*get_irq_causes) (struct ite_dev *dev);
+
+	/* enable rx */
+	void (*enable_rx) (struct ite_dev *dev);
+
+	/* make rx enter the idle state; keep listening for a pulse, but stop
+	 * streaming space bytes */
+	void (*idle_rx) (struct ite_dev *dev);
+
+	/* disable rx completely */
+	void (*disable_rx) (struct ite_dev *dev);
+
+	/* read bytes from RX FIFO; return read count */
+	int (*get_rx_bytes) (struct ite_dev *dev, u8 *buf, int buf_size);
+
+	/* enable tx FIFO space available interrupt */
+	void (*enable_tx_interrupt) (struct ite_dev *dev);
+
+	/* disable tx FIFO space available interrupt */
+	void (*disable_tx_interrupt) (struct ite_dev *dev);
+
+	/* get number of full TX FIFO slots */
+	int (*get_tx_used_slots) (struct ite_dev *dev);
+
+	/* put a byte to the TX FIFO */
+	void (*put_tx_byte) (struct ite_dev *dev, u8 value);
+
+	/* disable hardware completely */
+	void (*disable) (struct ite_dev *dev);
+
+	/* initialize the hardware */
+	void (*init_hardware) (struct ite_dev *dev);
+
+	/* set the carrier parameters */
+	void (*set_carrier_params) (struct ite_dev *dev, bool high_freq,
+				    bool use_demodulator, u8 carrier_freq_bits,
+				    u8 allowance_bits, u8 pulse_width_bits);
+};
+
+/* ITE CIR device structure */
+struct ite_dev {
+	struct pnp_dev *pdev;
+	struct rc_dev *rdev;
+	struct ir_raw_event rawir;
+
+	/* sync data */
+	spinlock_t lock;
+	bool in_use, transmitting;
+
+	/* transmit support */
+	int tx_fifo_allowance;
+	wait_queue_head_t tx_queue, tx_ended;
+
+	/* hardware I/O settings */
+	unsigned long cir_addr;
+	int cir_irq;
+
+	/* overridable copy of model parameters */
+	struct ite_dev_params params;
+};
+
+/* common values for all kinds of hardware */
+
+/* baud rate divisor default */
+#define ITE_BAUDRATE_DIVISOR		1
+
+/* low-speed carrier frequency limits (Hz) */
+#define ITE_LCF_MIN_CARRIER_FREQ	27000
+#define ITE_LCF_MAX_CARRIER_FREQ	58000
+
+/* high-speed carrier frequency limits (Hz) */
+#define ITE_HCF_MIN_CARRIER_FREQ	400000
+#define ITE_HCF_MAX_CARRIER_FREQ	500000
+
+/* default carrier freq for when demodulator is off (Hz) */
+#define ITE_DEFAULT_CARRIER_FREQ	38000
+
+/* default idling timeout in ns (0.2 seconds) */
+#define ITE_IDLE_TIMEOUT		200000000UL
+
+/* limit timeout values */
+#define ITE_MIN_IDLE_TIMEOUT		100000000UL
+#define ITE_MAX_IDLE_TIMEOUT		1000000000UL
+
+/* convert bits to us */
+#define ITE_BITS_TO_NS(bits, sample_period) \
+((u32) ((bits) * ITE_BAUDRATE_DIVISOR * sample_period))
+
+/*
+ * n in RDCR produces a tolerance of +/- n * 6.25% around the center
+ * carrier frequency...
+ *
+ * From two limit frequencies, L (low) and H (high), we can get both the
+ * center frequency F = (L + H) / 2 and the variation from the center
+ * frequency A = (H - L) / (H + L). We can use this in order to honor the
+ * s_rx_carrier_range() call in ir-core. We'll suppose that any request
+ * setting L=0 means we must shut down the demodulator.
+ */
+#define ITE_RXDCR_PER_10000_STEP 625
+
+/* high speed carrier freq values */
+#define ITE_CFQ_400		0x03
+#define ITE_CFQ_450		0x08
+#define ITE_CFQ_480		0x0b
+#define ITE_CFQ_500		0x0d
+
+/* values for pulse widths */
+#define ITE_TXMPW_A		0x02
+#define ITE_TXMPW_B		0x03
+#define ITE_TXMPW_C		0x04
+#define ITE_TXMPW_D		0x05
+#define ITE_TXMPW_E		0x06
+
+/* values for demodulator carrier range allowance */
+#define ITE_RXDCR_DEFAULT	0x01	/* default carrier range */
+#define ITE_RXDCR_MAX		0x07	/* default carrier range */
+
+/* DR TX bits */
+#define ITE_TX_PULSE		0x00
+#define ITE_TX_SPACE		0x80
+#define ITE_TX_MAX_RLE		0x80
+#define ITE_TX_RLE_MASK		0x7f
+
+/*
+ * IT8712F
+ *
+ * hardware data obtained from:
+ *
+ * IT8712F
+ * Environment Control – Low Pin Count Input / Output
+ * (EC - LPC I/O)
+ * Preliminary Specification V0. 81
+ */
+
+/* register offsets */
+#define IT87_DR		0x00	/* data register */
+#define IT87_IER	0x01	/* interrupt enable register */
+#define IT87_RCR	0x02	/* receiver control register */
+#define IT87_TCR1	0x03	/* transmitter control register 1 */
+#define IT87_TCR2	0x04	/* transmitter control register 2 */
+#define IT87_TSR	0x05	/* transmitter status register */
+#define IT87_RSR	0x06	/* receiver status register */
+#define IT87_BDLR	0x05	/* baud rate divisor low byte register */
+#define IT87_BDHR	0x06	/* baud rate divisor high byte register */
+#define IT87_IIR	0x07	/* interrupt identification register */
+
+#define IT87_IOREG_LENGTH 0x08	/* length of register file */
+
+/* IER bits */
+#define IT87_TLDLIE	0x01	/* transmitter low data interrupt enable */
+#define IT87_RDAIE	0x02	/* receiver data available interrupt enable */
+#define IT87_RFOIE	0x04	/* receiver FIFO overrun interrupt enable */
+#define IT87_IEC	0x08	/* interrupt enable control */
+#define IT87_BR		0x10	/* baud rate register enable */
+#define IT87_RESET	0x20	/* reset */
+
+/* RCR bits */
+#define IT87_RXDCR	0x07	/* receiver demodulation carrier range mask */
+#define IT87_RXACT	0x08	/* receiver active */
+#define IT87_RXEND	0x10	/* receiver demodulation enable */
+#define IT87_RXEN	0x20	/* receiver enable */
+#define IT87_HCFS	0x40	/* high-speed carrier frequency select */
+#define IT87_RDWOS	0x80	/* receiver data without sync */
+
+/* TCR1 bits */
+#define IT87_TXMPM	0x03	/* transmitter modulation pulse mode mask */
+#define IT87_TXMPM_DEFAULT 0x00	/* modulation pulse mode default */
+#define IT87_TXENDF	0x04	/* transmitter deferral */
+#define IT87_TXRLE	0x08	/* transmitter run length enable */
+#define IT87_FIFOTL	0x30	/* FIFO level threshold mask */
+#define IT87_FIFOTL_DEFAULT 0x20	/* FIFO level threshold default
+					 * 0x00 -> 1, 0x10 -> 7, 0x20 -> 17,
+					 * 0x30 -> 25 */
+#define IT87_ILE	0x40	/* internal loopback enable */
+#define IT87_FIFOCLR	0x80	/* FIFO clear bit */
+
+/* TCR2 bits */
+#define IT87_TXMPW	0x07	/* transmitter modulation pulse width mask */
+#define IT87_TXMPW_DEFAULT 0x04	/* default modulation pulse width */
+#define IT87_CFQ	0xf8	/* carrier frequency mask */
+#define IT87_CFQ_SHIFT	3	/* carrier frequency bit shift */
+
+/* TSR bits */
+#define IT87_TXFBC	0x3f	/* transmitter FIFO byte count mask */
+
+/* RSR bits */
+#define IT87_RXFBC	0x3f	/* receiver FIFO byte count mask */
+#define IT87_RXFTO	0x80	/* receiver FIFO time-out */
+
+/* IIR bits */
+#define IT87_IP		0x01	/* interrupt pending */
+#define IT87_II		0x06	/* interrupt identification mask */
+#define IT87_II_NOINT	0x00	/* no interrupt */
+#define IT87_II_TXLDL	0x02	/* transmitter low data level */
+#define IT87_II_RXDS	0x04	/* receiver data stored */
+#define IT87_II_RXFO	0x06	/* receiver FIFO overrun */
+
+/*
+ * IT8512E/F
+ *
+ * Hardware data obtained from:
+ *
+ * IT8512E/F
+ * Embedded Controller
+ * Preliminary Specification V0.4.1
+ *
+ * Note that the CIR registers are not directly available to the host, because
+ * they only are accessible to the integrated microcontroller. Thus, in order
+ * use it, some kind of bridging is required. As the bridging may depend on
+ * the controller firmware in use, we are going to use the PNP ID in order to
+ * determine the strategy and ports available. See after these generic
+ * IT8512E/F register definitions for register definitions for those
+ * strategies.
+ */
+
+/* register offsets */
+#define IT85_C0DR	0x00	/* data register */
+#define IT85_C0MSTCR	0x01	/* master control register */
+#define IT85_C0IER	0x02	/* interrupt enable register */
+#define IT85_C0IIR	0x03	/* interrupt identification register */
+#define IT85_C0CFR	0x04	/* carrier frequency register */
+#define IT85_C0RCR	0x05	/* receiver control register */
+#define IT85_C0TCR	0x06	/* transmitter control register */
+#define IT85_C0SCK	0x07	/* slow clock control register */
+#define IT85_C0BDLR	0x08	/* baud rate divisor low byte register */
+#define IT85_C0BDHR	0x09	/* baud rate divisor high byte register */
+#define IT85_C0TFSR	0x0a	/* transmitter FIFO status register */
+#define IT85_C0RFSR	0x0b	/* receiver FIFO status register */
+#define IT85_C0WCL	0x0d	/* wakeup code length register */
+#define IT85_C0WCR	0x0e	/* wakeup code read/write register */
+#define IT85_C0WPS	0x0f	/* wakeup power control/status register */
+
+#define IT85_IOREG_LENGTH 0x10	/* length of register file */
+
+/* C0MSTCR bits */
+#define IT85_RESET	0x01	/* reset */
+#define IT85_FIFOCLR	0x02	/* FIFO clear bit */
+#define IT85_FIFOTL	0x0c	/* FIFO level threshold mask */
+#define IT85_FIFOTL_DEFAULT 0x08	/* FIFO level threshold default
+					 * 0x00 -> 1, 0x04 -> 7, 0x08 -> 17,
+					 * 0x0c -> 25 */
+#define IT85_ILE	0x10	/* internal loopback enable */
+#define IT85_ILSEL	0x20	/* internal loopback select */
+
+/* C0IER bits */
+#define IT85_TLDLIE	0x01	/* TX low data level interrupt enable */
+#define IT85_RDAIE	0x02	/* RX data available interrupt enable */
+#define IT85_RFOIE	0x04	/* RX FIFO overrun interrupt enable */
+#define IT85_IEC	0x80	/* interrupt enable function control */
+
+/* C0IIR bits */
+#define IT85_TLDLI	0x01	/* transmitter low data level interrupt */
+#define IT85_RDAI	0x02	/* receiver data available interrupt */
+#define IT85_RFOI	0x04	/* receiver FIFO overrun interrupt */
+#define IT85_NIP	0x80	/* no interrupt pending */
+
+/* C0CFR bits */
+#define IT85_CFQ	0x1f	/* carrier frequency mask */
+#define IT85_HCFS	0x20	/* high speed carrier frequency select */
+
+/* C0RCR bits */
+#define IT85_RXDCR	0x07	/* receiver demodulation carrier range mask */
+#define IT85_RXACT	0x08	/* receiver active */
+#define IT85_RXEND	0x10	/* receiver demodulation enable */
+#define IT85_RDWOS	0x20	/* receiver data without sync */
+#define IT85_RXEN	0x80	/* receiver enable */
+
+/* C0TCR bits */
+#define IT85_TXMPW	0x07	/* transmitter modulation pulse width mask */
+#define IT85_TXMPW_DEFAULT 0x04	/* default modulation pulse width */
+#define IT85_TXMPM	0x18	/* transmitter modulation pulse mode mask */
+#define IT85_TXMPM_DEFAULT 0x00	/* modulation pulse mode default */
+#define IT85_TXENDF	0x20	/* transmitter deferral */
+#define IT85_TXRLE	0x40	/* transmitter run length enable */
+
+/* C0SCK bits */
+#define IT85_SCKS	0x01	/* slow clock select */
+#define IT85_TXDCKG	0x02	/* TXD clock gating */
+#define IT85_DLL1P8E	0x04	/* DLL 1.8432M enable */
+#define IT85_DLLTE	0x08	/* DLL test enable */
+#define IT85_BRCM	0x70	/* baud rate count mode */
+#define IT85_DLLOCK	0x80	/* DLL lock */
+
+/* C0TFSR bits */
+#define IT85_TXFBC	0x3f	/* transmitter FIFO count mask */
+
+/* C0RFSR bits */
+#define IT85_RXFBC	0x3f	/* receiver FIFO count mask */
+#define IT85_RXFTO	0x80	/* receiver FIFO time-out */
+
+/* C0WCL bits */
+#define IT85_WCL	0x3f	/* wakeup code length mask */
+
+/* C0WPS bits */
+#define IT85_CIRPOSIE	0x01	/* power on/off status interrupt enable */
+#define IT85_CIRPOIS	0x02	/* power on/off interrupt status */
+#define IT85_CIRPOII	0x04	/* power on/off interrupt identification */
+#define IT85_RCRST	0x10	/* wakeup code reading counter reset bit */
+#define IT85_WCRST	0x20	/* wakeup code writing counter reset bit */
+
+/*
+ * ITE8708
+ *
+ * Hardware data obtained from hacked driver for IT8512 in this forum post:
+ *
+ *  http://ubuntuforums.org/showthread.php?t=1028640
+ *
+ * Although there's no official documentation for that driver, analysis would
+ * suggest that it maps the 16 registers of IT8512 onto two 8-register banks,
+ * selectable by a single bank-select bit that's mapped onto both banks. The
+ * IT8512 registers are mapped in a different order, so that the first bank
+ * maps the ones that are used more often, and two registers that share a
+ * reserved high-order bit are placed at the same offset in both banks in
+ * order to reuse the reserved bit as the bank select bit.
+ */
+
+/* register offsets */
+
+/* mapped onto both banks */
+#define IT8708_BANKSEL	0x07	/* bank select register */
+#define IT8708_HRAE	0x80	/* high registers access enable */
+
+/* mapped onto the low bank */
+#define IT8708_C0DR	0x00	/* data register */
+#define IT8708_C0MSTCR	0x01	/* master control register */
+#define IT8708_C0IER	0x02	/* interrupt enable register */
+#define IT8708_C0IIR	0x03	/* interrupt identification register */
+#define IT8708_C0RFSR	0x04	/* receiver FIFO status register */
+#define IT8708_C0RCR	0x05	/* receiver control register */
+#define IT8708_C0TFSR	0x06	/* transmitter FIFO status register */
+#define IT8708_C0TCR	0x07	/* transmitter control register */
+
+/* mapped onto the high bank */
+#define IT8708_C0BDLR	0x01	/* baud rate divisor low byte register */
+#define IT8708_C0BDHR	0x02	/* baud rate divisor high byte register */
+#define IT8708_C0CFR	0x04	/* carrier frequency register */
+
+/* registers whose bank mapping we don't know, since they weren't being used
+ * in the hacked driver... most probably they belong to the high bank too,
+ * since they fit in the holes the other registers leave */
+#define IT8708_C0SCK	0x03	/* slow clock control register */
+#define IT8708_C0WCL	0x05	/* wakeup code length register */
+#define IT8708_C0WCR	0x06	/* wakeup code read/write register */
+#define IT8708_C0WPS	0x07	/* wakeup power control/status register */
+
+#define IT8708_IOREG_LENGTH 0x08	/* length of register file */
+
+/* two more registers that are defined in the hacked driver, but can't be
+ * found in the data sheets; no idea what they are or how they are accessed,
+ * since the hacked driver doesn't seem to use them */
+#define IT8708_CSCRR	0x00
+#define IT8708_CGPINTR	0x01
+
+/* CSCRR bits */
+#define IT8708_CSCRR_SCRB 0x3f
+#define IT8708_CSCRR_PM	0x80
+
+/* CGPINTR bits */
+#define IT8708_CGPINT	0x01
+
+/*
+ * ITE8709
+ *
+ * Hardware interfacing data obtained from the original lirc_ite8709 driver.
+ * Verbatim from its sources:
+ *
+ * The ITE8709 device seems to be the combination of IT8512 superIO chip and
+ * a specific firmware running on the IT8512's embedded micro-controller.
+ * In addition of the embedded micro-controller, the IT8512 chip contains a
+ * CIR module and several other modules. A few modules are directly accessible
+ * by the host CPU, but most of them are only accessible by the
+ * micro-controller. The CIR module is only accessible by the
+ * micro-controller.
+ *
+ * The battery-backed SRAM module is accessible by the host CPU and the
+ * micro-controller. So one of the MC's firmware role is to act as a bridge
+ * between the host CPU and the CIR module. The firmware implements a kind of
+ * communication protocol using the SRAM module as a shared memory. The IT8512
+ * specification is publicly available on ITE's web site, but the
+ * communication protocol is not, so it was reverse-engineered.
+ */
+
+/* register offsets */
+#define IT8709_RAM_IDX	0x00	/* index into the SRAM module bytes */
+#define IT8709_RAM_VAL	0x01	/* read/write data to the indexed byte */
+
+#define IT8709_IOREG_LENGTH 0x02	/* length of register file */
+
+/* register offsets inside the SRAM module */
+#define IT8709_MODE	0x1a	/* request/ack byte */
+#define IT8709_REG_IDX	0x1b	/* index of the CIR register to access */
+#define IT8709_REG_VAL	0x1c	/* value read/to be written */
+#define IT8709_IIR	0x1e	/* interrupt identification register */
+#define IT8709_RFSR	0x1f	/* receiver FIFO status register */
+#define IT8709_FIFO	0x20	/* start of in RAM RX FIFO copy */
+
+/* MODE values */
+#define IT8709_IDLE	0x00
+#define IT8709_WRITE	0x01
+#define IT8709_READ	0x02
diff --git a/drivers/media/rc/keymaps/Makefile b/drivers/media/rc/keymaps/Makefile
index 0659e9f..85cac7d 100644
--- a/drivers/media/rc/keymaps/Makefile
+++ b/drivers/media/rc/keymaps/Makefile
@@ -37,7 +37,6 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \
 			rc-gadmei-rm008z.o \
 			rc-genius-tvgo-a11mce.o \
 			rc-gotview7135.o \
-			rc-hauppauge-new.o \
 			rc-imon-mce.o \
 			rc-imon-pad.o \
 			rc-iodata-bctv7e.o \
@@ -68,14 +67,15 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \
 			rc-proteus-2309.o \
 			rc-purpletv.o \
 			rc-pv951.o \
-			rc-rc5-hauppauge-new.o \
-			rc-rc5-tv.o \
+			rc-hauppauge.o \
 			rc-rc6-mce.o \
 			rc-real-audio-220-32-keys.o \
 			rc-streamzap.o \
 			rc-tbs-nec.o \
+			rc-technisat-usb2.o \
 			rc-terratec-cinergy-xs.o \
 			rc-terratec-slim.o \
+			rc-terratec-slim-2.o \
 			rc-tevii-nec.o \
 			rc-total-media-in-hand.o \
 			rc-trekstor.o \
diff --git a/drivers/media/rc/keymaps/rc-adstech-dvb-t-pci.c b/drivers/media/rc/keymaps/rc-adstech-dvb-t-pci.c
index 136d395..9a8752f 100644
--- a/drivers/media/rc/keymaps/rc-adstech-dvb-t-pci.c
+++ b/drivers/media/rc/keymaps/rc-adstech-dvb-t-pci.c
@@ -50,9 +50,9 @@ static struct rc_map_table adstech_dvb_t_pci[] = {
 	{ 0x13, KEY_TUNER },		/* Live */
 	{ 0x0a, KEY_A },
 	{ 0x12, KEY_B },
-	{ 0x03, KEY_PROG1 },		/* 1 */
-	{ 0x01, KEY_PROG2 },		/* 2 */
-	{ 0x00, KEY_PROG3 },		/* 3 */
+	{ 0x03, KEY_RED },		/* 1 */
+	{ 0x01, KEY_GREEN },		/* 2 */
+	{ 0x00, KEY_YELLOW },		/* 3 */
 	{ 0x06, KEY_DVD },
 	{ 0x48, KEY_AUX },		/* Photo */
 	{ 0x40, KEY_VIDEO },
diff --git a/drivers/media/rc/keymaps/rc-avermedia-dvbt.c b/drivers/media/rc/keymaps/rc-avermedia-dvbt.c
index 3ddb41b..c25809d 100644
--- a/drivers/media/rc/keymaps/rc-avermedia-dvbt.c
+++ b/drivers/media/rc/keymaps/rc-avermedia-dvbt.c
@@ -26,12 +26,12 @@ static struct rc_map_table avermedia_dvbt[] = {
 	{ 0x16, KEY_8 },		/* '8' / 'down arrow' */
 	{ 0x36, KEY_9 },		/* '9' */
 
-	{ 0x20, KEY_LIST },		/* 'source' */
+	{ 0x20, KEY_VIDEO },		/* 'source' */
 	{ 0x10, KEY_TEXT },		/* 'teletext' */
 	{ 0x00, KEY_POWER },		/* 'power' */
 	{ 0x04, KEY_AUDIO },		/* 'audio' */
 	{ 0x06, KEY_ZOOM },		/* 'full screen' */
-	{ 0x18, KEY_VIDEO },		/* 'display' */
+	{ 0x18, KEY_SWITCHVIDEOMODE },	/* 'display' */
 	{ 0x38, KEY_SEARCH },		/* 'loop' */
 	{ 0x08, KEY_INFO },		/* 'preview' */
 	{ 0x2a, KEY_REWIND },		/* 'backward <<' */
diff --git a/drivers/media/rc/keymaps/rc-avermedia-m135a.c b/drivers/media/rc/keymaps/rc-avermedia-m135a.c
index 357fea58..3d2cbe4 100644
--- a/drivers/media/rc/keymaps/rc-avermedia-m135a.c
+++ b/drivers/media/rc/keymaps/rc-avermedia-m135a.c
@@ -108,7 +108,7 @@ static struct rc_map_table avermedia_m135a[] = {
 	{ 0x0414, KEY_TEXT },
 	{ 0x0415, KEY_EPG },
 	{ 0x041a, KEY_TV2 },      /* PIP */
-	{ 0x041b, KEY_MHP },      /* Snapshot */
+	{ 0x041b, KEY_CAMERA },      /* Snapshot */
 
 	{ 0x0417, KEY_RECORD },
 	{ 0x0416, KEY_PLAYPAUSE },
diff --git a/drivers/media/rc/keymaps/rc-avermedia-m733a-rm-k6.c b/drivers/media/rc/keymaps/rc-avermedia-m733a-rm-k6.c
index e694e6e..8cd7f28 100644
--- a/drivers/media/rc/keymaps/rc-avermedia-m733a-rm-k6.c
+++ b/drivers/media/rc/keymaps/rc-avermedia-m733a-rm-k6.c
@@ -56,7 +56,7 @@ static struct rc_map_table avermedia_m733a_rm_k6[] = {
 	{ 0x0414, KEY_TEXT },
 	{ 0x0415, KEY_EPG },
 	{ 0x041a, KEY_TV2 },      /* PIP */
-	{ 0x041b, KEY_MHP },      /* Snapshot */
+	{ 0x041b, KEY_CAMERA },      /* Snapshot */
 
 	{ 0x0417, KEY_RECORD },
 	{ 0x0416, KEY_PLAYPAUSE },
diff --git a/drivers/media/rc/keymaps/rc-avermedia-rm-ks.c b/drivers/media/rc/keymaps/rc-avermedia-rm-ks.c
index f4ca1ff..9d68af2 100644
--- a/drivers/media/rc/keymaps/rc-avermedia-rm-ks.c
+++ b/drivers/media/rc/keymaps/rc-avermedia-rm-ks.c
@@ -31,7 +31,7 @@ static struct rc_map_table avermedia_rm_ks[] = {
 	{ 0x0505, KEY_VOLUMEDOWN },
 	{ 0x0506, KEY_MUTE },
 	{ 0x0507, KEY_RIGHT },
-	{ 0x0508, KEY_PROG1 },
+	{ 0x0508, KEY_RED },
 	{ 0x0509, KEY_1 },
 	{ 0x050a, KEY_2 },
 	{ 0x050b, KEY_3 },
diff --git a/drivers/media/rc/keymaps/rc-behold-columbus.c b/drivers/media/rc/keymaps/rc-behold-columbus.c
index 4b787fa..8bf058f 100644
--- a/drivers/media/rc/keymaps/rc-behold-columbus.c
+++ b/drivers/media/rc/keymaps/rc-behold-columbus.c
@@ -28,7 +28,7 @@ static struct rc_map_table behold_columbus[] = {
 	 *                             */
 
 	{ 0x13, KEY_MUTE },
-	{ 0x11, KEY_PROPS },
+	{ 0x11, KEY_VIDEO },
 	{ 0x1C, KEY_TUNER },	/* KEY_TV/KEY_RADIO	*/
 	{ 0x12, KEY_POWER },
 
diff --git a/drivers/media/rc/keymaps/rc-behold.c b/drivers/media/rc/keymaps/rc-behold.c
index 0ee1f14..c909a23 100644
--- a/drivers/media/rc/keymaps/rc-behold.c
+++ b/drivers/media/rc/keymaps/rc-behold.c
@@ -97,7 +97,7 @@ static struct rc_map_table behold[] = {
 	{ 0x6b861a, KEY_STOP },
 	{ 0x6b860e, KEY_TEXT },
 	{ 0x6b861f, KEY_RED },	/*XXX KEY_AUDIO	*/
-	{ 0x6b861e, KEY_YELLOW },	/*XXX KEY_SOURCE	*/
+	{ 0x6b861e, KEY_VIDEO },
 
 	/*  0x1d   0x13     0x19  *
 	 * SLEEP  PREVIEW   DVB   *
diff --git a/drivers/media/rc/keymaps/rc-budget-ci-old.c b/drivers/media/rc/keymaps/rc-budget-ci-old.c
index 97fc386..2f66e43 100644
--- a/drivers/media/rc/keymaps/rc-budget-ci-old.c
+++ b/drivers/media/rc/keymaps/rc-budget-ci-old.c
@@ -12,7 +12,8 @@
 
 #include <media/rc-map.h>
 
-/* From reading the following remotes:
+/*
+ * From reading the following remotes:
  * Zenith Universal 7 / TV Mode 807 / VCR Mode 837
  * Hauppauge (from NOVA-CI-s box product)
  * This is a "middle of the road" approach, differences are noted
diff --git a/drivers/media/rc/keymaps/rc-cinergy.c b/drivers/media/rc/keymaps/rc-cinergy.c
index 99520ff..cf3a6bf 100644
--- a/drivers/media/rc/keymaps/rc-cinergy.c
+++ b/drivers/media/rc/keymaps/rc-cinergy.c
@@ -25,7 +25,7 @@ static struct rc_map_table cinergy[] = {
 	{ 0x09, KEY_9 },
 
 	{ 0x0a, KEY_POWER },
-	{ 0x0b, KEY_PROG1 },		/* app */
+	{ 0x0b, KEY_MEDIA },		/* app */
 	{ 0x0c, KEY_ZOOM },		/* zoom/fullscreen */
 	{ 0x0d, KEY_CHANNELUP },	/* channel */
 	{ 0x0e, KEY_CHANNELDOWN },	/* channel- */
diff --git a/drivers/media/rc/keymaps/rc-dntv-live-dvb-t.c b/drivers/media/rc/keymaps/rc-dntv-live-dvb-t.c
index 43912bd..82c0200 100644
--- a/drivers/media/rc/keymaps/rc-dntv-live-dvb-t.c
+++ b/drivers/media/rc/keymaps/rc-dntv-live-dvb-t.c
@@ -32,7 +32,7 @@ static struct rc_map_table dntv_live_dvb_t[] = {
 	{ 0x0c, KEY_SEARCH },		/* scan */
 	{ 0x0d, KEY_STOP },
 	{ 0x0e, KEY_PAUSE },
-	{ 0x0f, KEY_LIST },		/* source */
+	{ 0x0f, KEY_VIDEO },		/* source */
 
 	{ 0x10, KEY_MUTE },
 	{ 0x11, KEY_REWIND },		/* backward << */
diff --git a/drivers/media/rc/keymaps/rc-encore-enltv.c b/drivers/media/rc/keymaps/rc-encore-enltv.c
index afa4e92..e56ac6e 100644
--- a/drivers/media/rc/keymaps/rc-encore-enltv.c
+++ b/drivers/media/rc/keymaps/rc-encore-enltv.c
@@ -24,7 +24,7 @@ static struct rc_map_table encore_enltv[] = {
 	{ 0x1e, KEY_TV },
 	{ 0x00, KEY_VIDEO },
 	{ 0x01, KEY_AUDIO },		/* music */
-	{ 0x02, KEY_MHP },		/* picture */
+	{ 0x02, KEY_CAMERA },		/* picture */
 
 	{ 0x1f, KEY_1 },
 	{ 0x03, KEY_2 },
@@ -77,7 +77,7 @@ static struct rc_map_table encore_enltv[] = {
 	{ 0x50, KEY_SLEEP },		/* shutdown */
 	{ 0x51, KEY_MODE },		/* stereo > main */
 	{ 0x52, KEY_SELECT },		/* stereo > sap */
-	{ 0x53, KEY_PROG1 },		/* teletext */
+	{ 0x53, KEY_TEXT },		/* teletext */
 
 
 	{ 0x59, KEY_RED },		/* AP1 */
diff --git a/drivers/media/rc/keymaps/rc-encore-enltv2.c b/drivers/media/rc/keymaps/rc-encore-enltv2.c
index 7d5b00e..b6264f1 100644
--- a/drivers/media/rc/keymaps/rc-encore-enltv2.c
+++ b/drivers/media/rc/keymaps/rc-encore-enltv2.c
@@ -32,7 +32,7 @@ static struct rc_map_table encore_enltv2[] = {
 	{ 0x64, KEY_LAST },		/* +100 */
 	{ 0x4e, KEY_AGAIN },		/* Recall */
 
-	{ 0x6c, KEY_SWITCHVIDEOMODE },	/* Video Source */
+	{ 0x6c, KEY_VIDEO },		/* Video Source */
 	{ 0x5e, KEY_MENU },
 	{ 0x56, KEY_SCREEN },
 	{ 0x7a, KEY_SETUP },
diff --git a/drivers/media/rc/keymaps/rc-flydvb.c b/drivers/media/rc/keymaps/rc-flydvb.c
index aea2f4a..a8b0f66 100644
--- a/drivers/media/rc/keymaps/rc-flydvb.c
+++ b/drivers/media/rc/keymaps/rc-flydvb.c
@@ -37,8 +37,8 @@ static struct rc_map_table flydvb[] = {
 	{ 0x13, KEY_CHANNELDOWN },	/* CH- */
 	{ 0x1d, KEY_ENTER },		/* Enter */
 
-	{ 0x1a, KEY_MODE },		/* PIP */
-	{ 0x18, KEY_TUNER },		/* Source */
+	{ 0x1a, KEY_TV2 },		/* PIP */
+	{ 0x18, KEY_VIDEO },		/* Source */
 
 	{ 0x1e, KEY_RECORD },		/* Record/Pause */
 	{ 0x15, KEY_ANGLE },		/* Swap (no label on key) */
diff --git a/drivers/media/rc/keymaps/rc-hauppauge-new.c b/drivers/media/rc/keymaps/rc-hauppauge-new.c
deleted file mode 100644
index bd11da4..0000000
--- a/drivers/media/rc/keymaps/rc-hauppauge-new.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/* hauppauge-new.h - Keytable for hauppauge_new Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Hauppauge: the newer, gray remotes (seems there are multiple
- * slightly different versions), shipped with cx88+ivtv cards.
- * almost rc5 coding, but some non-standard keys */
-
-static struct rc_map_table hauppauge_new[] = {
-	/* Keys 0 to 9 */
-	{ 0x00, KEY_0 },
-	{ 0x01, KEY_1 },
-	{ 0x02, KEY_2 },
-	{ 0x03, KEY_3 },
-	{ 0x04, KEY_4 },
-	{ 0x05, KEY_5 },
-	{ 0x06, KEY_6 },
-	{ 0x07, KEY_7 },
-	{ 0x08, KEY_8 },
-	{ 0x09, KEY_9 },
-
-	{ 0x0a, KEY_TEXT },		/* keypad asterisk as well */
-	{ 0x0b, KEY_RED },		/* red button */
-	{ 0x0c, KEY_RADIO },
-	{ 0x0d, KEY_MENU },
-	{ 0x0e, KEY_SUBTITLE },		/* also the # key */
-	{ 0x0f, KEY_MUTE },
-	{ 0x10, KEY_VOLUMEUP },
-	{ 0x11, KEY_VOLUMEDOWN },
-	{ 0x12, KEY_PREVIOUS },		/* previous channel */
-	{ 0x14, KEY_UP },
-	{ 0x15, KEY_DOWN },
-	{ 0x16, KEY_LEFT },
-	{ 0x17, KEY_RIGHT },
-	{ 0x18, KEY_VIDEO },		/* Videos */
-	{ 0x19, KEY_AUDIO },		/* Music */
-	/* 0x1a: Pictures - presume this means
-	   "Multimedia Home Platform" -
-	   no "PICTURES" key in input.h
-	 */
-	{ 0x1a, KEY_MHP },
-
-	{ 0x1b, KEY_EPG },		/* Guide */
-	{ 0x1c, KEY_TV },
-	{ 0x1e, KEY_NEXTSONG },		/* skip >| */
-	{ 0x1f, KEY_EXIT },		/* back/exit */
-	{ 0x20, KEY_CHANNELUP },	/* channel / program + */
-	{ 0x21, KEY_CHANNELDOWN },	/* channel / program - */
-	{ 0x22, KEY_CHANNEL },		/* source (old black remote) */
-	{ 0x24, KEY_PREVIOUSSONG },	/* replay |< */
-	{ 0x25, KEY_ENTER },		/* OK */
-	{ 0x26, KEY_SLEEP },		/* minimize (old black remote) */
-	{ 0x29, KEY_BLUE },		/* blue key */
-	{ 0x2e, KEY_GREEN },		/* green button */
-	{ 0x30, KEY_PAUSE },		/* pause */
-	{ 0x32, KEY_REWIND },		/* backward << */
-	{ 0x34, KEY_FASTFORWARD },	/* forward >> */
-	{ 0x35, KEY_PLAY },
-	{ 0x36, KEY_STOP },
-	{ 0x37, KEY_RECORD },		/* recording */
-	{ 0x38, KEY_YELLOW },		/* yellow key */
-	{ 0x3b, KEY_SELECT },		/* top right button */
-	{ 0x3c, KEY_ZOOM },		/* full */
-	{ 0x3d, KEY_POWER },		/* system power (green button) */
-};
-
-static struct rc_map_list hauppauge_new_map = {
-	.map = {
-		.scan    = hauppauge_new,
-		.size    = ARRAY_SIZE(hauppauge_new),
-		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_HAUPPAUGE_NEW,
-	}
-};
-
-static int __init init_rc_map_hauppauge_new(void)
-{
-	return rc_map_register(&hauppauge_new_map);
-}
-
-static void __exit exit_rc_map_hauppauge_new(void)
-{
-	rc_map_unregister(&hauppauge_new_map);
-}
-
-module_init(init_rc_map_hauppauge_new)
-module_exit(exit_rc_map_hauppauge_new)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c b/drivers/media/rc/keymaps/rc-hauppauge.c
index dfc9b15..cd3db77 100644
--- a/drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c
+++ b/drivers/media/rc/keymaps/rc-hauppauge.c
@@ -1,8 +1,14 @@
-/* rc5-hauppauge-new.h - Keytable for rc5_hauppauge_new Remote Controller
+/* rc-hauppauge.c - Keytable for Hauppauge Remote Controllers
  *
  * keymap imported from ir-keymaps.c
  *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ * This map currently contains the code for four different RCs:
+ *	- New Hauppauge Gray;
+ *	- Old Hauppauge Gray (with a golden screen for media keys);
+ *	- Hauppauge Black;
+ *	- DSR-0112 remote bundled with Haupauge MiniStick.
+ *
+ * Copyright (c) 2010-2011 by Mauro Carvalho Chehab <mchehab@redhat.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -20,63 +26,124 @@
  */
 
 static struct rc_map_table rc5_hauppauge_new[] = {
-	/* Keys 0 to 9 */
-	{ 0x1e00, KEY_0 },
+	/*
+	 * Remote Controller Hauppauge Gray found on modern devices
+	 * Keycodes start with address = 0x1e
+	 */
+
+	{ 0x1e3b, KEY_SELECT },		/* GO / house symbol */
+	{ 0x1e3d, KEY_POWER2 },		/* system power (green button) */
+
+	{ 0x1e1c, KEY_TV },
+	{ 0x1e18, KEY_VIDEO },		/* Videos */
+	{ 0x1e19, KEY_AUDIO },		/* Music */
+	{ 0x1e1a, KEY_CAMERA },		/* Pictures */
+
+	{ 0x1e1b, KEY_EPG },		/* Guide */
+	{ 0x1e0c, KEY_RADIO },
+
+	{ 0x1e14, KEY_UP },
+	{ 0x1e15, KEY_DOWN },
+	{ 0x1e16, KEY_LEFT },
+	{ 0x1e17, KEY_RIGHT },
+	{ 0x1e25, KEY_OK },		/* OK */
+
+	{ 0x1e1f, KEY_EXIT },		/* back/exit */
+	{ 0x1e0d, KEY_MENU },
+
+	{ 0x1e10, KEY_VOLUMEUP },
+	{ 0x1e11, KEY_VOLUMEDOWN },
+
+	{ 0x1e12, KEY_PREVIOUS },	/* previous channel */
+	{ 0x1e0f, KEY_MUTE },
+
+	{ 0x1e20, KEY_CHANNELUP },	/* channel / program + */
+	{ 0x1e21, KEY_CHANNELDOWN },	/* channel / program - */
+
+	{ 0x1e37, KEY_RECORD },		/* recording */
+	{ 0x1e36, KEY_STOP },
+
+	{ 0x1e32, KEY_REWIND },		/* backward << */
+	{ 0x1e35, KEY_PLAY },
+	{ 0x1e34, KEY_FASTFORWARD },	/* forward >> */
+
+	{ 0x1e24, KEY_PREVIOUSSONG },	/* replay |< */
+	{ 0x1e30, KEY_PAUSE },		/* pause */
+	{ 0x1e1e, KEY_NEXTSONG },	/* skip >| */
+
 	{ 0x1e01, KEY_1 },
 	{ 0x1e02, KEY_2 },
 	{ 0x1e03, KEY_3 },
+
 	{ 0x1e04, KEY_4 },
 	{ 0x1e05, KEY_5 },
 	{ 0x1e06, KEY_6 },
+
 	{ 0x1e07, KEY_7 },
 	{ 0x1e08, KEY_8 },
 	{ 0x1e09, KEY_9 },
 
 	{ 0x1e0a, KEY_TEXT },		/* keypad asterisk as well */
-	{ 0x1e0b, KEY_RED },		/* red button */
-	{ 0x1e0c, KEY_RADIO },
-	{ 0x1e0d, KEY_MENU },
-	{ 0x1e0e, KEY_SUBTITLE },		/* also the # key */
-	{ 0x1e0f, KEY_MUTE },
-	{ 0x1e10, KEY_VOLUMEUP },
-	{ 0x1e11, KEY_VOLUMEDOWN },
-	{ 0x1e12, KEY_PREVIOUS },		/* previous channel */
-	{ 0x1e14, KEY_UP },
-	{ 0x1e15, KEY_DOWN },
-	{ 0x1e16, KEY_LEFT },
-	{ 0x1e17, KEY_RIGHT },
-	{ 0x1e18, KEY_VIDEO },		/* Videos */
-	{ 0x1e19, KEY_AUDIO },		/* Music */
-	/* 0x1e1a: Pictures - presume this means
-	   "Multimedia Home Platform" -
-	   no "PICTURES" key in input.h
-	 */
-	{ 0x1e1a, KEY_MHP },
+	{ 0x1e00, KEY_0 },
+	{ 0x1e0e, KEY_SUBTITLE },	/* also the Pound key (#) */
 
-	{ 0x1e1b, KEY_EPG },		/* Guide */
-	{ 0x1e1c, KEY_TV },
-	{ 0x1e1e, KEY_NEXTSONG },		/* skip >| */
-	{ 0x1e1f, KEY_EXIT },		/* back/exit */
-	{ 0x1e20, KEY_CHANNELUP },	/* channel / program + */
-	{ 0x1e21, KEY_CHANNELDOWN },	/* channel / program - */
-	{ 0x1e22, KEY_CHANNEL },		/* source (old black remote) */
-	{ 0x1e24, KEY_PREVIOUSSONG },	/* replay |< */
-	{ 0x1e25, KEY_ENTER },		/* OK */
-	{ 0x1e26, KEY_SLEEP },		/* minimize (old black remote) */
-	{ 0x1e29, KEY_BLUE },		/* blue key */
+	{ 0x1e0b, KEY_RED },		/* red button */
 	{ 0x1e2e, KEY_GREEN },		/* green button */
-	{ 0x1e30, KEY_PAUSE },		/* pause */
-	{ 0x1e32, KEY_REWIND },		/* backward << */
-	{ 0x1e34, KEY_FASTFORWARD },	/* forward >> */
-	{ 0x1e35, KEY_PLAY },
-	{ 0x1e36, KEY_STOP },
-	{ 0x1e37, KEY_RECORD },		/* recording */
 	{ 0x1e38, KEY_YELLOW },		/* yellow key */
-	{ 0x1e3b, KEY_SELECT },		/* top right button */
-	{ 0x1e3c, KEY_ZOOM },		/* full */
-	{ 0x1e3d, KEY_POWER },		/* system power (green button) */
+	{ 0x1e29, KEY_BLUE },		/* blue key */
+
+	/*
+	 * Old Remote Controller Hauppauge Gray with a golden screen
+	 * Keycodes start with address = 0x1f
+	 */
+	{ 0x1f3d, KEY_POWER2 },		/* system power (green button) */
+	{ 0x1f3b, KEY_SELECT },		/* GO */
+
+	/* Keys 0 to 9 */
+	{ 0x1f00, KEY_0 },
+	{ 0x1f01, KEY_1 },
+	{ 0x1f02, KEY_2 },
+	{ 0x1f03, KEY_3 },
+	{ 0x1f04, KEY_4 },
+	{ 0x1f05, KEY_5 },
+	{ 0x1f06, KEY_6 },
+	{ 0x1f07, KEY_7 },
+	{ 0x1f08, KEY_8 },
+	{ 0x1f09, KEY_9 },
+
+	{ 0x1f1f, KEY_EXIT },		/* back/exit */
+	{ 0x1f0d, KEY_MENU },
+
+	{ 0x1f10, KEY_VOLUMEUP },
+	{ 0x1f11, KEY_VOLUMEDOWN },
+	{ 0x1f20, KEY_CHANNELUP },	/* channel / program + */
+	{ 0x1f21, KEY_CHANNELDOWN },	/* channel / program - */
+	{ 0x1f25, KEY_ENTER },		/* OK */
+
+	{ 0x1f0b, KEY_RED },		/* red button */
+	{ 0x1f2e, KEY_GREEN },		/* green button */
+	{ 0x1f38, KEY_YELLOW },		/* yellow key */
+	{ 0x1f29, KEY_BLUE },		/* blue key */
+
+	{ 0x1f0f, KEY_MUTE },
+	{ 0x1f0c, KEY_RADIO },		/* There's no indicator on this key */
+	{ 0x1f3c, KEY_ZOOM },		/* full */
+
+	{ 0x1f32, KEY_REWIND },		/* backward << */
+	{ 0x1f35, KEY_PLAY },
+	{ 0x1f34, KEY_FASTFORWARD },	/* forward >> */
 
-	/* Keycodes for DSR-0112 remote bundled with Haupauge MiniStick */
+	{ 0x1f37, KEY_RECORD },		/* recording */
+	{ 0x1f36, KEY_STOP },
+	{ 0x1f30, KEY_PAUSE },		/* pause */
+
+	{ 0x1f24, KEY_PREVIOUSSONG },	/* replay |< */
+	{ 0x1f1e, KEY_NEXTSONG },	/* skip >| */
+
+	/*
+	 * Keycodes for DSR-0112 remote bundled with Haupauge MiniStick
+	 * Keycodes start with address = 0x1d
+	 */
 	{ 0x1d00, KEY_0 },
 	{ 0x1d01, KEY_1 },
 	{ 0x1d02, KEY_2 },
@@ -113,6 +180,39 @@ static struct rc_map_table rc5_hauppauge_new[] = {
 	{ 0x1d3b, KEY_GOTO },
 	{ 0x1d3d, KEY_POWER },
 	{ 0x1d3f, KEY_HOME },
+
+	/*
+	 * Keycodes for the old Black Remote Controller
+	 * This one also uses RC-5 protocol
+	 * Keycodes start with address = 0x00
+	 */
+	{ 0x001f, KEY_TV },
+	{ 0x0020, KEY_CHANNELUP },
+	{ 0x000c, KEY_RADIO },
+
+	{ 0x0011, KEY_VOLUMEDOWN },
+	{ 0x002e, KEY_ZOOM },		/* full screen */
+	{ 0x0010, KEY_VOLUMEUP },
+
+	{ 0x000d, KEY_MUTE },
+	{ 0x0021, KEY_CHANNELDOWN },
+	{ 0x0022, KEY_VIDEO },		/* source */
+
+	{ 0x0001, KEY_1 },
+	{ 0x0002, KEY_2 },
+	{ 0x0003, KEY_3 },
+
+	{ 0x0004, KEY_4 },
+	{ 0x0005, KEY_5 },
+	{ 0x0006, KEY_6 },
+
+	{ 0x0007, KEY_7 },
+	{ 0x0008, KEY_8 },
+	{ 0x0009, KEY_9 },
+
+	{ 0x001e, KEY_RED },	/* Reserved */
+	{ 0x0000, KEY_0 },
+	{ 0x0026, KEY_SLEEP },	/* Minimize */
 };
 
 static struct rc_map_list rc5_hauppauge_new_map = {
@@ -120,7 +220,7 @@ static struct rc_map_list rc5_hauppauge_new_map = {
 		.scan    = rc5_hauppauge_new,
 		.size    = ARRAY_SIZE(rc5_hauppauge_new),
 		.rc_type = RC_TYPE_RC5,
-		.name    = RC_MAP_RC5_HAUPPAUGE_NEW,
+		.name    = RC_MAP_HAUPPAUGE,
 	}
 };
 
diff --git a/drivers/media/rc/keymaps/rc-imon-mce.c b/drivers/media/rc/keymaps/rc-imon-mce.c
index cb67184..937a819 100644
--- a/drivers/media/rc/keymaps/rc-imon-mce.c
+++ b/drivers/media/rc/keymaps/rc-imon-mce.c
@@ -111,7 +111,7 @@ static struct rc_map_table imon_mce[] = {
 	{ 0x800ff44d, KEY_TITLE },
 
 	{ 0x800ff40c, KEY_POWER },
-	{ 0x800ff40d, KEY_PROG1 }, /* Windows MCE button */
+	{ 0x800ff40d, KEY_LEFTMETA }, /* Windows MCE button */
 
 };
 
diff --git a/drivers/media/rc/keymaps/rc-imon-pad.c b/drivers/media/rc/keymaps/rc-imon-pad.c
index eef46b7..63d42bd 100644
--- a/drivers/media/rc/keymaps/rc-imon-pad.c
+++ b/drivers/media/rc/keymaps/rc-imon-pad.c
@@ -125,7 +125,7 @@ static struct rc_map_table imon_pad[] = {
 	{ 0x2b8195b7, KEY_CONTEXT_MENU }, /* Left Menu*/
 	{ 0x02000065, KEY_COMPOSE }, /* RightMenu */
 	{ 0x28b715b7, KEY_COMPOSE }, /* RightMenu */
-	{ 0x2ab195b7, KEY_PROG1 }, /* Go or MultiMon */
+	{ 0x2ab195b7, KEY_LEFTMETA }, /* Go or MultiMon */
 	{ 0x29b715b7, KEY_DASHBOARD }, /* AppLauncher */
 };
 
diff --git a/drivers/media/rc/keymaps/rc-kworld-315u.c b/drivers/media/rc/keymaps/rc-kworld-315u.c
index 3ce6ef7..7f33edb 100644
--- a/drivers/media/rc/keymaps/rc-kworld-315u.c
+++ b/drivers/media/rc/keymaps/rc-kworld-315u.c
@@ -17,7 +17,7 @@
 
 static struct rc_map_table kworld_315u[] = {
 	{ 0x6143, KEY_POWER },
-	{ 0x6101, KEY_TUNER },		/* source */
+	{ 0x6101, KEY_VIDEO },		/* source */
 	{ 0x610b, KEY_ZOOM },
 	{ 0x6103, KEY_POWER2 },		/* shutdown */
 
diff --git a/drivers/media/rc/keymaps/rc-kworld-plus-tv-analog.c b/drivers/media/rc/keymaps/rc-kworld-plus-tv-analog.c
index e45f0b8..08d1831 100644
--- a/drivers/media/rc/keymaps/rc-kworld-plus-tv-analog.c
+++ b/drivers/media/rc/keymaps/rc-kworld-plus-tv-analog.c
@@ -17,7 +17,7 @@
  */
 
 static struct rc_map_table kworld_plus_tv_analog[] = {
-	{ 0x0c, KEY_PROG1 },		/* Kworld key */
+	{ 0x0c, KEY_LEFTMETA },		/* Kworld key */
 	{ 0x16, KEY_CLOSECD },		/* -> ) */
 	{ 0x1d, KEY_POWER2 },
 
diff --git a/drivers/media/rc/keymaps/rc-lme2510.c b/drivers/media/rc/keymaps/rc-lme2510.c
index 875cd81..3c19139 100644
--- a/drivers/media/rc/keymaps/rc-lme2510.c
+++ b/drivers/media/rc/keymaps/rc-lme2510.c
@@ -13,33 +13,75 @@
 
 
 static struct rc_map_table lme2510_rc[] = {
-	{ 0xba45, KEY_0 },
-	{ 0xa05f, KEY_1 },
-	{ 0xaf50, KEY_2 },
-	{ 0xa25d, KEY_3 },
-	{ 0xbe41, KEY_4 },
-	{ 0xf50a, KEY_5 },
-	{ 0xbd42, KEY_6 },
-	{ 0xb847, KEY_7 },
-	{ 0xb649, KEY_8 },
-	{ 0xfa05, KEY_9 },
-	{ 0xbc43, KEY_POWER },
-	{ 0xb946, KEY_SUBTITLE },
-	{ 0xf906, KEY_PAUSE },
-	{ 0xfc03, KEY_MEDIA_REPEAT},
-	{ 0xfd02, KEY_PAUSE },
-	{ 0xa15e, KEY_VOLUMEUP },
-	{ 0xa35c, KEY_VOLUMEDOWN },
-	{ 0xf609, KEY_CHANNELUP },
-	{ 0xe51a, KEY_CHANNELDOWN },
-	{ 0xe11e, KEY_PLAY },
-	{ 0xe41b, KEY_ZOOM },
-	{ 0xa659, KEY_MUTE },
-	{ 0xa55a, KEY_TV },
-	{ 0xe718, KEY_RECORD },
-	{ 0xf807, KEY_EPG },
-	{ 0xfe01, KEY_STOP },
-
+	/* Type 1 - 26 buttons */
+	{ 0xef12ba45, KEY_0 },
+	{ 0xef12a05f, KEY_1 },
+	{ 0xef12af50, KEY_2 },
+	{ 0xef12a25d, KEY_3 },
+	{ 0xef12be41, KEY_4 },
+	{ 0xef12f50a, KEY_5 },
+	{ 0xef12bd42, KEY_6 },
+	{ 0xef12b847, KEY_7 },
+	{ 0xef12b649, KEY_8 },
+	{ 0xef12fa05, KEY_9 },
+	{ 0xef12bc43, KEY_POWER },
+	{ 0xef12b946, KEY_SUBTITLE },
+	{ 0xef12f906, KEY_PAUSE },
+	{ 0xef12fc03, KEY_MEDIA_REPEAT},
+	{ 0xef12fd02, KEY_PAUSE },
+	{ 0xef12a15e, KEY_VOLUMEUP },
+	{ 0xef12a35c, KEY_VOLUMEDOWN },
+	{ 0xef12f609, KEY_CHANNELUP },
+	{ 0xef12e51a, KEY_CHANNELDOWN },
+	{ 0xef12e11e, KEY_PLAY },
+	{ 0xef12e41b, KEY_ZOOM },
+	{ 0xef12a659, KEY_MUTE },
+	{ 0xef12a55a, KEY_TV },
+	{ 0xef12e718, KEY_RECORD },
+	{ 0xef12f807, KEY_EPG },
+	{ 0xef12fe01, KEY_STOP },
+	/* Type 2 - 20 buttons */
+	{ 0xff40ea15, KEY_0 },
+	{ 0xff40f708, KEY_1 },
+	{ 0xff40f609, KEY_2 },
+	{ 0xff40f50a, KEY_3 },
+	{ 0xff40f30c, KEY_4 },
+	{ 0xff40f20d, KEY_5 },
+	{ 0xff40f10e, KEY_6 },
+	{ 0xff40ef10, KEY_7 },
+	{ 0xff40ee11, KEY_8 },
+	{ 0xff40ed12, KEY_9 },
+	{ 0xff40ff00, KEY_POWER },
+	{ 0xff40fb04, KEY_MEDIA_REPEAT}, /* Recall */
+	{ 0xff40e51a, KEY_PAUSE }, /* Timeshift */
+	{ 0xff40fd02, KEY_VOLUMEUP }, /* 2 x -/+ Keys not marked */
+	{ 0xff40f906, KEY_VOLUMEDOWN }, /* Volumne defined as right hand*/
+	{ 0xff40fe01, KEY_CHANNELUP },
+	{ 0xff40fa05, KEY_CHANNELDOWN },
+	{ 0xff40eb14, KEY_ZOOM },
+	{ 0xff40e718, KEY_RECORD },
+	{ 0xff40e916, KEY_STOP },
+	/* Type 3 - 20 buttons */
+	{ 0xff00e31c, KEY_0 },
+	{ 0xff00f807, KEY_1 },
+	{ 0xff00ea15, KEY_2 },
+	{ 0xff00f609, KEY_3 },
+	{ 0xff00e916, KEY_4 },
+	{ 0xff00e619, KEY_5 },
+	{ 0xff00f20d, KEY_6 },
+	{ 0xff00f30c, KEY_7 },
+	{ 0xff00e718, KEY_8 },
+	{ 0xff00a15e, KEY_9 },
+	{ 0xff00ba45, KEY_POWER },
+	{ 0xff00bb44, KEY_MEDIA_REPEAT}, /* Recall */
+	{ 0xff00b54a, KEY_PAUSE }, /* Timeshift */
+	{ 0xff00b847, KEY_VOLUMEUP }, /* 2 x -/+ Keys not marked */
+	{ 0xff00bc43, KEY_VOLUMEDOWN }, /* Volumne defined as right hand*/
+	{ 0xff00b946, KEY_CHANNELUP },
+	{ 0xff00bf40, KEY_CHANNELDOWN },
+	{ 0xff00f708, KEY_ZOOM },
+	{ 0xff00bd42, KEY_RECORD },
+	{ 0xff00a55a, KEY_STOP },
 };
 
 static struct rc_map_list lme2510_map = {
diff --git a/drivers/media/rc/keymaps/rc-msi-tvanywhere-plus.c b/drivers/media/rc/keymaps/rc-msi-tvanywhere-plus.c
index fa8fd0a..8e9969d 100644
--- a/drivers/media/rc/keymaps/rc-msi-tvanywhere-plus.c
+++ b/drivers/media/rc/keymaps/rc-msi-tvanywhere-plus.c
@@ -62,7 +62,7 @@ static struct rc_map_table msi_tvanywhere_plus[] = {
 	{ 0x13, KEY_AGAIN },		/* Recall */
 
 	{ 0x1e, KEY_POWER },		/* Power */
-	{ 0x07, KEY_TUNER },		/* Source */
+	{ 0x07, KEY_VIDEO },		/* Source */
 	{ 0x1c, KEY_SEARCH },		/* Scan */
 	{ 0x18, KEY_MUTE },		/* Mute */
 
diff --git a/drivers/media/rc/keymaps/rc-nebula.c b/drivers/media/rc/keymaps/rc-nebula.c
index 3e6f077..ddae20e 100644
--- a/drivers/media/rc/keymaps/rc-nebula.c
+++ b/drivers/media/rc/keymaps/rc-nebula.c
@@ -27,7 +27,7 @@ static struct rc_map_table nebula[] = {
 	{ 0x0b, KEY_AUX },
 	{ 0x0c, KEY_DVD },
 	{ 0x0d, KEY_POWER },
-	{ 0x0e, KEY_MHP },	/* labelled 'Picture' */
+	{ 0x0e, KEY_CAMERA },	/* labelled 'Picture' */
 	{ 0x0f, KEY_AUDIO },
 	{ 0x10, KEY_INFO },
 	{ 0x11, KEY_F13 },	/* 16:9 */
diff --git a/drivers/media/rc/keymaps/rc-norwood.c b/drivers/media/rc/keymaps/rc-norwood.c
index 629ee9d..f1c1281 100644
--- a/drivers/media/rc/keymaps/rc-norwood.c
+++ b/drivers/media/rc/keymaps/rc-norwood.c
@@ -29,7 +29,7 @@ static struct rc_map_table norwood[] = {
 	{ 0x28, KEY_8 },
 	{ 0x29, KEY_9 },
 
-	{ 0x78, KEY_TUNER },		/* Video Source        */
+	{ 0x78, KEY_VIDEO },		/* Video Source        */
 	{ 0x2c, KEY_EXIT },		/* Open/Close software */
 	{ 0x2a, KEY_SELECT },		/* 2 Digit Select      */
 	{ 0x69, KEY_AGAIN },		/* Recall              */
diff --git a/drivers/media/rc/keymaps/rc-pctv-sedna.c b/drivers/media/rc/keymaps/rc-pctv-sedna.c
index fa5ae59..7cdef6e 100644
--- a/drivers/media/rc/keymaps/rc-pctv-sedna.c
+++ b/drivers/media/rc/keymaps/rc-pctv-sedna.c
@@ -36,7 +36,7 @@ static struct rc_map_table pctv_sedna[] = {
 	{ 0x0e, KEY_STOP },
 	{ 0x0f, KEY_PREVIOUSSONG },
 	{ 0x10, KEY_ZOOM },
-	{ 0x11, KEY_TUNER },	/* Source */
+	{ 0x11, KEY_VIDEO },	/* Source */
 	{ 0x12, KEY_POWER },
 	{ 0x13, KEY_MUTE },
 	{ 0x15, KEY_CHANNELDOWN },
diff --git a/drivers/media/rc/keymaps/rc-pixelview-mk12.c b/drivers/media/rc/keymaps/rc-pixelview-mk12.c
index 8d9f664..125fc39 100644
--- a/drivers/media/rc/keymaps/rc-pixelview-mk12.c
+++ b/drivers/media/rc/keymaps/rc-pixelview-mk12.c
@@ -34,7 +34,7 @@ static struct rc_map_table pixelview_mk12[] = {
 	{ 0x866b13, KEY_AGAIN },	/* loop */
 	{ 0x866b10, KEY_DIGITS },	/* +100 */
 
-	{ 0x866b00, KEY_MEDIA },	/* source */
+	{ 0x866b00, KEY_VIDEO },		/* source */
 	{ 0x866b18, KEY_MUTE },		/* mute */
 	{ 0x866b19, KEY_CAMERA },	/* snapshot */
 	{ 0x866b1a, KEY_SEARCH },	/* scan */
diff --git a/drivers/media/rc/keymaps/rc-pixelview-new.c b/drivers/media/rc/keymaps/rc-pixelview-new.c
index 777a700..bd78d6a 100644
--- a/drivers/media/rc/keymaps/rc-pixelview-new.c
+++ b/drivers/media/rc/keymaps/rc-pixelview-new.c
@@ -33,7 +33,7 @@ static struct rc_map_table pixelview_new[] = {
 	{ 0x3e, KEY_0 },
 
 	{ 0x1c, KEY_AGAIN },		/* LOOP	*/
-	{ 0x3f, KEY_MEDIA },		/* Source */
+	{ 0x3f, KEY_VIDEO },		/* Source */
 	{ 0x1f, KEY_LAST },		/* +100 */
 	{ 0x1b, KEY_MUTE },
 
diff --git a/drivers/media/rc/keymaps/rc-pixelview.c b/drivers/media/rc/keymaps/rc-pixelview.c
index 0ec5988..06187e7 100644
--- a/drivers/media/rc/keymaps/rc-pixelview.c
+++ b/drivers/media/rc/keymaps/rc-pixelview.c
@@ -15,7 +15,7 @@
 static struct rc_map_table pixelview[] = {
 
 	{ 0x1e, KEY_POWER },	/* power */
-	{ 0x07, KEY_MEDIA },	/* source */
+	{ 0x07, KEY_VIDEO },	/* source */
 	{ 0x1c, KEY_SEARCH },	/* scan */
 
 
diff --git a/drivers/media/rc/keymaps/rc-pv951.c b/drivers/media/rc/keymaps/rc-pv951.c
index 83a418d..5e8beee 100644
--- a/drivers/media/rc/keymaps/rc-pv951.c
+++ b/drivers/media/rc/keymaps/rc-pv951.c
@@ -46,10 +46,10 @@ static struct rc_map_table pv951[] = {
 	{ 0x0c, KEY_SEARCH },		/* AUTOSCAN */
 
 	/* Not sure what to do with these ones! */
-	{ 0x0f, KEY_SELECT },		/* SOURCE */
+	{ 0x0f, KEY_VIDEO },		/* SOURCE */
 	{ 0x0a, KEY_KPPLUS },		/* +100 */
 	{ 0x14, KEY_EQUAL },		/* SYNC */
-	{ 0x1c, KEY_MEDIA },		/* PC/TV */
+	{ 0x1c, KEY_TV },		/* PC/TV */
 };
 
 static struct rc_map_list pv951_map = {
diff --git a/drivers/media/rc/keymaps/rc-rc5-tv.c b/drivers/media/rc/keymaps/rc-rc5-tv.c
deleted file mode 100644
index 4fcef9f..0000000
--- a/drivers/media/rc/keymaps/rc-rc5-tv.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/* rc5-tv.h - Keytable for rc5_tv Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* generic RC5 keytable                                          */
-/* see http://users.pandora.be/nenya/electronics/rc5/codes00.htm */
-/* used by old (black) Hauppauge remotes                         */
-
-static struct rc_map_table rc5_tv[] = {
-	/* Keys 0 to 9 */
-	{ 0x00, KEY_0 },
-	{ 0x01, KEY_1 },
-	{ 0x02, KEY_2 },
-	{ 0x03, KEY_3 },
-	{ 0x04, KEY_4 },
-	{ 0x05, KEY_5 },
-	{ 0x06, KEY_6 },
-	{ 0x07, KEY_7 },
-	{ 0x08, KEY_8 },
-	{ 0x09, KEY_9 },
-
-	{ 0x0b, KEY_CHANNEL },		/* channel / program (japan: 11) */
-	{ 0x0c, KEY_POWER },		/* standby */
-	{ 0x0d, KEY_MUTE },		/* mute / demute */
-	{ 0x0f, KEY_TV },		/* display */
-	{ 0x10, KEY_VOLUMEUP },
-	{ 0x11, KEY_VOLUMEDOWN },
-	{ 0x12, KEY_BRIGHTNESSUP },
-	{ 0x13, KEY_BRIGHTNESSDOWN },
-	{ 0x1e, KEY_SEARCH },		/* search + */
-	{ 0x20, KEY_CHANNELUP },	/* channel / program + */
-	{ 0x21, KEY_CHANNELDOWN },	/* channel / program - */
-	{ 0x22, KEY_CHANNEL },		/* alt / channel */
-	{ 0x23, KEY_LANGUAGE },		/* 1st / 2nd language */
-	{ 0x26, KEY_SLEEP },		/* sleeptimer */
-	{ 0x2e, KEY_MENU },		/* 2nd controls (USA: menu) */
-	{ 0x30, KEY_PAUSE },
-	{ 0x32, KEY_REWIND },
-	{ 0x33, KEY_GOTO },
-	{ 0x35, KEY_PLAY },
-	{ 0x36, KEY_STOP },
-	{ 0x37, KEY_RECORD },		/* recording */
-	{ 0x3c, KEY_TEXT },		/* teletext submode (Japan: 12) */
-	{ 0x3d, KEY_SUSPEND },		/* system standby */
-
-};
-
-static struct rc_map_list rc5_tv_map = {
-	.map = {
-		.scan    = rc5_tv,
-		.size    = ARRAY_SIZE(rc5_tv),
-		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_RC5_TV,
-	}
-};
-
-static int __init init_rc_map_rc5_tv(void)
-{
-	return rc_map_register(&rc5_tv_map);
-}
-
-static void __exit exit_rc_map_rc5_tv(void)
-{
-	rc_map_unregister(&rc5_tv_map);
-}
-
-module_init(init_rc_map_rc5_tv)
-module_exit(exit_rc_map_rc5_tv)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-rc6-mce.c b/drivers/media/rc/keymaps/rc-rc6-mce.c
index 2f5dc06..8dd519e 100644
--- a/drivers/media/rc/keymaps/rc-rc6-mce.c
+++ b/drivers/media/rc/keymaps/rc-rc6-mce.c
@@ -30,7 +30,7 @@ static struct rc_map_table rc6_mce[] = {
 	{ 0x800f040a, KEY_DELETE },
 	{ 0x800f040b, KEY_ENTER },
 	{ 0x800f040c, KEY_POWER },		/* PC Power */
-	{ 0x800f040d, KEY_PROG1 },		/* Windows MCE button */
+	{ 0x800f040d, KEY_LEFTMETA },		/* Windows MCE button */
 	{ 0x800f040e, KEY_MUTE },
 	{ 0x800f040f, KEY_INFO },
 
diff --git a/drivers/media/rc/keymaps/rc-real-audio-220-32-keys.c b/drivers/media/rc/keymaps/rc-real-audio-220-32-keys.c
index 2d14598..6813d11 100644
--- a/drivers/media/rc/keymaps/rc-real-audio-220-32-keys.c
+++ b/drivers/media/rc/keymaps/rc-real-audio-220-32-keys.c
@@ -35,7 +35,7 @@ static struct rc_map_table real_audio_220_32_keys[] = {
 	{ 0x15, KEY_CHANNELDOWN},
 	{ 0x16, KEY_ENTER},
 
-	{ 0x11, KEY_LIST},		/* Source */
+	{ 0x11, KEY_VIDEO},		/* Source */
 	{ 0x0d, KEY_AUDIO},		/* stereo */
 
 	{ 0x0f, KEY_PREVIOUS},		/* Prev */
diff --git a/drivers/media/rc/keymaps/rc-technisat-usb2.c b/drivers/media/rc/keymaps/rc-technisat-usb2.c
new file mode 100644
index 0000000..4afe577
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-technisat-usb2.c
@@ -0,0 +1,93 @@
+/* rc-technisat-usb2.c - Keytable for SkyStar HD USB
+ *
+ * Copyright (C) 2010 Patrick Boettcher,
+ *                    Kernel Labs Inc. PO Box 745, St James, NY 11780
+ *
+ * Development was sponsored by Technisat Digital UK Limited, whose
+ * registered office is Witan Gate House 500 - 600 Witan Gate West,
+ * Milton Keynes, MK9 1SH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * THIS PROGRAM IS PROVIDED "AS IS" AND BOTH THE COPYRIGHT HOLDER AND
+ * TECHNISAT DIGITAL UK LTD DISCLAIM ALL WARRANTIES WITH REGARD TO
+ * THIS PROGRAM INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR
+ * FITNESS FOR A PARTICULAR PURPOSE.  NEITHER THE COPYRIGHT HOLDER
+ * NOR TECHNISAT DIGITAL UK LIMITED SHALL BE LIABLE FOR ANY SPECIAL,
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
+ * RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR
+ * IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS PROGRAM. See the
+ * GNU General Public License for more details.
+ */
+
+#include <media/rc-map.h>
+
+static struct rc_map_table technisat_usb2[] = {
+	{0x0a0c, KEY_POWER},
+	{0x0a01, KEY_1},
+	{0x0a02, KEY_2},
+	{0x0a03, KEY_3},
+	{0x0a0d, KEY_MUTE},
+	{0x0a04, KEY_4},
+	{0x0a05, KEY_5},
+	{0x0a06, KEY_6},
+	{0x0a38, KEY_VIDEO}, /* EXT */
+	{0x0a07, KEY_7},
+	{0x0a08, KEY_8},
+	{0x0a09, KEY_9},
+	{0x0a00, KEY_0},
+	{0x0a4f, KEY_INFO},
+	{0x0a20, KEY_CHANNELUP},
+	{0x0a52, KEY_MENU},
+	{0x0a11, KEY_VOLUMEUP},
+	{0x0a57, KEY_OK},
+	{0x0a10, KEY_VOLUMEDOWN},
+	{0x0a2f, KEY_EPG},
+	{0x0a21, KEY_CHANNELDOWN},
+	{0x0a22, KEY_REFRESH},
+	{0x0a3c, KEY_TEXT},
+	{0x0a76, KEY_ENTER}, /* HOOK */
+	{0x0a0f, KEY_HELP},
+	{0x0a6b, KEY_RED},
+	{0x0a6c, KEY_GREEN},
+	{0x0a6d, KEY_YELLOW},
+	{0x0a6e, KEY_BLUE},
+	{0x0a29, KEY_STOP},
+	{0x0a23, KEY_LANGUAGE},
+	{0x0a53, KEY_TV},
+	{0x0a0a, KEY_PROGRAM},
+};
+
+static struct rc_map_list technisat_usb2_map = {
+	.map = {
+		.scan    = technisat_usb2,
+		.size    = ARRAY_SIZE(technisat_usb2),
+		.rc_type = RC_TYPE_RC5,
+		.name    = RC_MAP_TECHNISAT_USB2,
+	}
+};
+
+static int __init init_rc_map(void)
+{
+	return rc_map_register(&technisat_usb2_map);
+}
+
+static void __exit exit_rc_map(void)
+{
+	rc_map_unregister(&technisat_usb2_map);
+}
+
+module_init(init_rc_map)
+module_exit(exit_rc_map)
+
+MODULE_AUTHOR("Patrick Boettcher <pboettcher@kernellabs.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/rc/keymaps/rc-terratec-slim-2.c b/drivers/media/rc/keymaps/rc-terratec-slim-2.c
new file mode 100644
index 0000000..4409391
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-terratec-slim-2.c
@@ -0,0 +1,72 @@
+/*
+ * TerraTec remote controller keytable
+ *
+ * Copyright (C) 2011 Martin Groszhauser <mgroszhauser@gmail.com>
+ * Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License along
+ *    with this program; if not, write to the Free Software Foundation, Inc.,
+ *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <media/rc-map.h>
+
+/*
+ * TerraTec slim remote, 6 rows, 3 columns.
+ * Keytable from Martin Groszhauser <mgroszhauser@gmail.com>
+ */
+static struct rc_map_table terratec_slim_2[] = {
+	{ 0x8001, KEY_MUTE },            /* MUTE */
+	{ 0x8002, KEY_VOLUMEDOWN },
+	{ 0x8003, KEY_CHANNELDOWN },
+	{ 0x8004, KEY_1 },
+	{ 0x8005, KEY_2 },
+	{ 0x8006, KEY_3 },
+	{ 0x8007, KEY_4 },
+	{ 0x8008, KEY_5 },
+	{ 0x8009, KEY_6 },
+	{ 0x800a, KEY_7 },
+	{ 0x800c, KEY_ZOOM },            /* [fullscreen] */
+	{ 0x800d, KEY_0 },
+	{ 0x800e, KEY_AGAIN },           /* [two arrows forming a circle] */
+	{ 0x8012, KEY_POWER2 },          /* [red power button] */
+	{ 0x801a, KEY_VOLUMEUP },
+	{ 0x801b, KEY_8 },
+	{ 0x801e, KEY_CHANNELUP },
+	{ 0x801f, KEY_9 },
+};
+
+static struct rc_map_list terratec_slim_2_map = {
+	.map = {
+		.scan    = terratec_slim_2,
+		.size    = ARRAY_SIZE(terratec_slim_2),
+		.rc_type = RC_TYPE_NEC,
+		.name    = RC_MAP_TERRATEC_SLIM_2,
+	}
+};
+
+static int __init init_rc_map_terratec_slim_2(void)
+{
+	return rc_map_register(&terratec_slim_2_map);
+}
+
+static void __exit exit_rc_map_terratec_slim_2(void)
+{
+	rc_map_unregister(&terratec_slim_2_map);
+}
+
+module_init(init_rc_map_terratec_slim_2)
+module_exit(exit_rc_map_terratec_slim_2)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
diff --git a/drivers/media/rc/keymaps/rc-winfast.c b/drivers/media/rc/keymaps/rc-winfast.c
index 2747db4..0062ca2 100644
--- a/drivers/media/rc/keymaps/rc-winfast.c
+++ b/drivers/media/rc/keymaps/rc-winfast.c
@@ -27,15 +27,15 @@ static struct rc_map_table winfast[] = {
 	{ 0x0e, KEY_8 },
 	{ 0x0f, KEY_9 },
 
-	{ 0x00, KEY_POWER },
+	{ 0x00, KEY_POWER2 },
 	{ 0x1b, KEY_AUDIO },		/* Audio Source */
 	{ 0x02, KEY_TUNER },		/* TV/FM, not on Y0400052 */
 	{ 0x1e, KEY_VIDEO },		/* Video Source */
 	{ 0x16, KEY_INFO },		/* Display information */
-	{ 0x04, KEY_VOLUMEUP },
-	{ 0x08, KEY_VOLUMEDOWN },
-	{ 0x0c, KEY_CHANNELUP },
-	{ 0x10, KEY_CHANNELDOWN },
+	{ 0x04, KEY_LEFT },
+	{ 0x08, KEY_RIGHT },
+	{ 0x0c, KEY_UP },
+	{ 0x10, KEY_DOWN },
 	{ 0x03, KEY_ZOOM },		/* fullscreen */
 	{ 0x1f, KEY_TEXT },		/* closed caption/teletext */
 	{ 0x20, KEY_SLEEP },
@@ -47,7 +47,7 @@ static struct rc_map_table winfast[] = {
 	{ 0x2e, KEY_BLUE },
 	{ 0x18, KEY_KPPLUS },		/* fine tune + , not on Y040052 */
 	{ 0x19, KEY_KPMINUS },		/* fine tune - , not on Y040052 */
-	{ 0x2a, KEY_MEDIA },		/* PIP (Picture in picture */
+	{ 0x2a, KEY_TV2 },		/* PIP (Picture in picture */
 	{ 0x21, KEY_DOT },
 	{ 0x13, KEY_ENTER },
 	{ 0x11, KEY_LAST },		/* Recall (last channel */
@@ -57,7 +57,7 @@ static struct rc_map_table winfast[] = {
 	{ 0x25, KEY_TIME },		/* Time Shifting */
 	{ 0x26, KEY_STOP },
 	{ 0x27, KEY_RECORD },
-	{ 0x28, KEY_SAVE },		/* Screenshot */
+	{ 0x28, KEY_CAMERA },		/* Screenshot */
 	{ 0x2f, KEY_MENU },
 	{ 0x30, KEY_CANCEL },
 	{ 0x31, KEY_CHANNEL },		/* Channel Surf */
@@ -70,10 +70,10 @@ static struct rc_map_table winfast[] = {
 	{ 0x38, KEY_DVD },
 
 	{ 0x1a, KEY_MODE},		/* change to MCE mode on Y04G0051 */
-	{ 0x3e, KEY_F21 },		/* MCE +VOL, on Y04G0033 */
-	{ 0x3a, KEY_F22 },		/* MCE -VOL, on Y04G0033 */
-	{ 0x3b, KEY_F23 },		/* MCE +CH,  on Y04G0033 */
-	{ 0x3f, KEY_F24 }		/* MCE -CH,  on Y04G0033 */
+	{ 0x3e, KEY_VOLUMEUP },		/* MCE +VOL, on Y04G0033 */
+	{ 0x3a, KEY_VOLUMEDOWN },	/* MCE -VOL, on Y04G0033 */
+	{ 0x3b, KEY_CHANNELUP },	/* MCE +CH,  on Y04G0033 */
+	{ 0x3f, KEY_CHANNELDOWN }	/* MCE -CH,  on Y04G0033 */
 };
 
 static struct rc_map_list winfast_map = {
diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index e4f8eac..044fb7a 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -186,7 +186,7 @@ static const struct mceusb_model mceusb_model[] = {
 		 * remotes, but we should have something handy,
 		 * to allow testing it
 		 */
-		.rc_map = RC_MAP_RC5_HAUPPAUGE_NEW,
+		.rc_map = RC_MAP_HAUPPAUGE,
 		.name = "Conexant Hybrid TV (cx231xx) MCE IR",
 	},
 	[CX_HYBRID_TV] = {
@@ -261,7 +261,7 @@ static struct usb_device_id mceusb_dev_table[] = {
 	  .driver_info = MCE_GEN2_TX_INV },
 	/* Topseed eHome Infrared Transceiver */
 	{ USB_DEVICE(VENDOR_TOPSEED, 0x0011),
-	  .driver_info = MCE_GEN2_TX_INV },
+	  .driver_info = MCE_GEN3 },
 	/* Ricavision internal Infrared Transceiver */
 	{ USB_DEVICE(VENDOR_RICAVISION, 0x0010) },
 	/* Itron ione Libra Q-11 */