mfd: Initial max8925 support

Basic Max8925 support, which is a power management IC from Maxim
Semiconductor.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

4 files changed, 483 insertions, 0 deletions

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 815907e..ee416ee 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -194,6 +194,15 @@ config PMIC_ADP5520
 	  individual components like LCD backlight, LEDs, GPIOs and Kepad
 	  under the corresponding menus.
 
+config MFD_MAX8925
+	tristate "Maxim Semiconductor MAX8925 PMIC Support"
+	depends on I2C
+	help
+	  Say yes here to support for Maxim Semiconductor MAX8925. This is
+	  a Power Management IC. This driver provies common support for
+	  accessing the device, additional drivers must be enabled in order
+	  to use the functionality of the device.
+
 config MFD_WM8400
 	tristate "Support Wolfson Microelectronics WM8400"
 	select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 1e3ae06..2616357 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -49,6 +49,8 @@ endif
 obj-$(CONFIG_UCB1400_CORE)	+= ucb1400_core.o
 
 obj-$(CONFIG_PMIC_DA903X)	+= da903x.o
+max8925-objs			:= max8925-core.o max8925-i2c.o
+obj-$(CONFIG_MFD_MAX8925)	+= max8925.o
 
 obj-$(CONFIG_MFD_PCF50633)	+= pcf50633-core.o
 obj-$(CONFIG_PCF50633_ADC)	+= pcf50633-adc.o
diff --git a/drivers/mfd/max8925-core.c b/drivers/mfd/max8925-core.c
new file mode 100644
index 0000000..3e26267
--- /dev/null
+++ b/drivers/mfd/max8925-core.c
@@ -0,0 +1,262 @@
+/*
+ * Base driver for Maxim MAX8925
+ *
+ * Copyright (C) 2009 Marvell International Ltd.
+ *	Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/max8925.h>
+
+#define IRQ_MODE_STATUS		0
+#define IRQ_MODE_MASK		1
+
+static int __get_irq_offset(struct max8925_chip *chip, int irq, int mode,
+			    int *offset, int *bit)
+{
+	if (!offset || !bit)
+		return -EINVAL;
+
+	switch (chip->chip_id) {
+	case MAX8925_GPM:
+		*bit = irq % BITS_PER_BYTE;
+		if (irq < (BITS_PER_BYTE << 1)) {	/* irq = [0,15] */
+			*offset = (mode) ? MAX8925_CHG_IRQ1_MASK
+				: MAX8925_CHG_IRQ1;
+			if (irq >= BITS_PER_BYTE)
+				(*offset)++;
+		} else {				/* irq = [16,31] */
+			*offset = (mode) ? MAX8925_ON_OFF_IRQ1_MASK
+				: MAX8925_ON_OFF_IRQ1;
+			if (irq >= (BITS_PER_BYTE * 3))
+				(*offset)++;
+		}
+		break;
+	case MAX8925_ADC:
+		*bit = irq % BITS_PER_BYTE;
+		*offset = (mode) ? MAX8925_TSC_IRQ_MASK : MAX8925_TSC_IRQ;
+		break;
+	default:
+		goto out;
+	}
+	return 0;
+out:
+	dev_err(chip->dev, "Wrong irq #%d is assigned\n", irq);
+	return -EINVAL;
+}
+
+static int __check_irq(int irq)
+{
+	if ((irq < 0) || (irq >= MAX8925_NUM_IRQ))
+		return -EINVAL;
+	return 0;
+}
+
+int max8925_mask_irq(struct max8925_chip *chip, int irq)
+{
+	int offset, bit, ret;
+
+	ret = __get_irq_offset(chip, irq, IRQ_MODE_MASK, &offset, &bit);
+	if (ret < 0)
+		return ret;
+	ret = max8925_set_bits(chip->i2c, offset, 1 << bit, 1 << bit);
+	return ret;
+}
+
+int max8925_unmask_irq(struct max8925_chip *chip, int irq)
+{
+	int offset, bit, ret;
+
+	ret = __get_irq_offset(chip, irq, IRQ_MODE_MASK, &offset, &bit);
+	if (ret < 0)
+		return ret;
+	ret = max8925_set_bits(chip->i2c, offset, 1 << bit, 0);
+	return ret;
+}
+
+#define INT_STATUS_NUM		(MAX8925_NUM_IRQ / BITS_PER_BYTE)
+
+static irqreturn_t max8925_irq_thread(int irq, void *data)
+{
+	struct max8925_chip *chip = data;
+	unsigned long irq_status[INT_STATUS_NUM];
+	unsigned char status_buf[INT_STATUS_NUM << 1];
+	int i, ret;
+
+	memset(irq_status, 0, sizeof(unsigned long) * INT_STATUS_NUM);
+
+	/* all these interrupt status registers are read-only */
+	switch (chip->chip_id) {
+	case MAX8925_GPM:
+		ret = max8925_bulk_read(chip->i2c, MAX8925_CHG_IRQ1,
+					4, status_buf);
+		if (ret < 0)
+			goto out;
+		ret = max8925_bulk_read(chip->i2c, MAX8925_ON_OFF_IRQ1,
+					2, &status_buf[4]);
+		if (ret < 0)
+			goto out;
+		ret = max8925_bulk_read(chip->i2c, MAX8925_ON_OFF_IRQ2,
+					2, &status_buf[6]);
+		if (ret < 0)
+			goto out;
+		/* clear masked interrupt status */
+		status_buf[0] &= (~status_buf[2] & CHG_IRQ1_MASK);
+		irq_status[0] |= status_buf[0];
+		status_buf[1] &= (~status_buf[3] & CHG_IRQ2_MASK);
+		irq_status[0] |= (status_buf[1] << BITS_PER_BYTE);
+		status_buf[4] &= (~status_buf[5] & ON_OFF_IRQ1_MASK);
+		irq_status[0] |= (status_buf[4] << (BITS_PER_BYTE * 2));
+		status_buf[6] &= (~status_buf[7] & ON_OFF_IRQ2_MASK);
+		irq_status[0] |= (status_buf[6] << (BITS_PER_BYTE * 3));
+		break;
+	case MAX8925_ADC:
+		ret = max8925_bulk_read(chip->i2c, MAX8925_TSC_IRQ,
+					2, status_buf);
+		if (ret < 0)
+			goto out;
+		/* clear masked interrupt status */
+		status_buf[0] &= (~status_buf[1] & TSC_IRQ_MASK);
+		irq_status[0] |= status_buf[0];
+		break;
+	default:
+		goto out;
+	}
+
+	for_each_bit(i, &irq_status[0], MAX8925_NUM_IRQ) {
+		clear_bit(i, irq_status);
+		dev_dbg(chip->dev, "Servicing IRQ #%d in %s\n", i, chip->name);
+
+		mutex_lock(&chip->irq_lock);
+		if (chip->irq[i].handler)
+			chip->irq[i].handler(i, chip->irq[i].data);
+		else {
+			max8925_mask_irq(chip, i);
+			dev_err(chip->dev, "Noboday cares IRQ #%d in %s. "
+				"Now mask it.\n", i, chip->name);
+		}
+		mutex_unlock(&chip->irq_lock);
+	}
+out:
+	return IRQ_HANDLED;
+}
+
+int max8925_request_irq(struct max8925_chip *chip, int irq,
+			irq_handler_t handler, void *data)
+{
+	if ((__check_irq(irq) < 0) || !handler)
+		return -EINVAL;
+
+	mutex_lock(&chip->irq_lock);
+	chip->irq[irq].handler = handler;
+	chip->irq[irq].data = data;
+	mutex_unlock(&chip->irq_lock);
+	return 0;
+}
+EXPORT_SYMBOL(max8925_request_irq);
+
+int max8925_free_irq(struct max8925_chip *chip, int irq)
+{
+	if (__check_irq(irq) < 0)
+		return -EINVAL;
+
+	mutex_lock(&chip->irq_lock);
+	chip->irq[irq].handler = NULL;
+	chip->irq[irq].data = NULL;
+	mutex_unlock(&chip->irq_lock);
+	return 0;
+}
+EXPORT_SYMBOL(max8925_free_irq);
+
+static int __devinit device_gpm_init(struct max8925_chip *chip,
+				      struct i2c_client *i2c,
+				      struct max8925_platform_data *pdata)
+{
+	int ret;
+
+	/* mask all IRQs */
+	ret = max8925_set_bits(i2c, MAX8925_CHG_IRQ1_MASK, 0x7, 0x7);
+	if (ret < 0)
+		goto out;
+	ret = max8925_set_bits(i2c, MAX8925_CHG_IRQ2_MASK, 0xff, 0xff);
+	if (ret < 0)
+		goto out;
+	ret = max8925_set_bits(i2c, MAX8925_ON_OFF_IRQ1_MASK, 0xff, 0xff);
+	if (ret < 0)
+		goto out;
+	ret = max8925_set_bits(i2c, MAX8925_ON_OFF_IRQ2_MASK, 0x3, 0x3);
+	if (ret < 0)
+		goto out;
+
+	chip->name = "GPM";
+	memset(chip->irq, 0, sizeof(struct max8925_irq) * MAX8925_NUM_IRQ);
+	ret = request_threaded_irq(i2c->irq, NULL, max8925_irq_thread,
+				IRQF_ONESHOT | IRQF_TRIGGER_LOW,
+				"max8925-gpm", chip);
+	if (ret < 0) {
+		dev_err(chip->dev, "Failed to request IRQ #%d.\n", i2c->irq);
+		goto out;
+	}
+	chip->chip_irq = i2c->irq;
+
+	/* enable hard-reset for ONKEY power-off */
+	max8925_set_bits(i2c, MAX8925_SYSENSEL, 0x80, 0x80);
+out:
+	return ret;
+}
+
+static int __devinit device_adc_init(struct max8925_chip *chip,
+				     struct i2c_client *i2c,
+				     struct max8925_platform_data *pdata)
+{
+	int ret;
+
+	/* mask all IRQs */
+	ret = max8925_set_bits(i2c, MAX8925_TSC_IRQ_MASK, 3, 3);
+
+	chip->name = "ADC";
+	memset(chip->irq, 0, sizeof(struct max8925_irq) * MAX8925_NUM_IRQ);
+	ret = request_threaded_irq(i2c->irq, NULL, max8925_irq_thread,
+				IRQF_ONESHOT | IRQF_TRIGGER_LOW,
+				"max8925-adc", chip);
+	if (ret < 0) {
+		dev_err(chip->dev, "Failed to request IRQ #%d.\n", i2c->irq);
+		goto out;
+	}
+	chip->chip_irq = i2c->irq;
+out:
+	return ret;
+}
+
+int __devinit max8925_device_init(struct max8925_chip *chip,
+				  struct max8925_platform_data *pdata)
+{
+	switch (chip->chip_id) {
+	case MAX8925_GPM:
+		device_gpm_init(chip, chip->i2c, pdata);
+		break;
+	case MAX8925_ADC:
+		device_adc_init(chip, chip->i2c, pdata);
+		break;
+	}
+	return 0;
+}
+
+void max8925_device_exit(struct max8925_chip *chip)
+{
+	if (chip->chip_irq >= 0)
+		free_irq(chip->chip_irq, chip);
+}
+
+MODULE_DESCRIPTION("PMIC Driver for Maxim MAX8925");
+MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/max8925-i2c.c b/drivers/mfd/max8925-i2c.c
new file mode 100644
index 0000000..942068e
--- /dev/null
+++ b/drivers/mfd/max8925-i2c.c
@@ -0,0 +1,210 @@
+/*
+ * I2C driver for Maxim MAX8925
+ *
+ * Copyright (C) 2009 Marvell International Ltd.
+ *	Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/mfd/max8925.h>
+
+static inline int max8925_read_device(struct i2c_client *i2c,
+				      int reg, int bytes, void *dest)
+{
+	unsigned char data;
+	unsigned char *buf;
+	int ret;
+
+	buf = kzalloc(bytes + 1, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	data = (unsigned char)reg;
+	ret = i2c_master_send(i2c, &data, 1);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_master_recv(i2c, buf, bytes + 1);
+	if (ret < 0)
+		return ret;
+	memcpy(dest, buf, bytes);
+	return 0;
+}
+
+static inline int max8925_write_device(struct i2c_client *i2c,
+				       int reg, int bytes, void *src)
+{
+	unsigned char buf[bytes + 1];
+	int ret;
+
+	buf[0] = (unsigned char)reg;
+	memcpy(&buf[1], src, bytes);
+
+	ret = i2c_master_send(i2c, buf, bytes + 1);
+	if (ret < 0)
+		return ret;
+	return 0;
+}
+
+int max8925_reg_read(struct i2c_client *i2c, int reg)
+{
+	struct max8925_chip *chip = i2c_get_clientdata(i2c);
+	unsigned char data;
+	int ret;
+
+	mutex_lock(&chip->io_lock);
+	ret = max8925_read_device(i2c, reg, 1, &data);
+	mutex_unlock(&chip->io_lock);
+
+	if (ret < 0)
+		return ret;
+	else
+		return (int)data;
+}
+EXPORT_SYMBOL(max8925_reg_read);
+
+int max8925_reg_write(struct i2c_client *i2c, int reg,
+		unsigned char data)
+{
+	struct max8925_chip *chip = i2c_get_clientdata(i2c);
+	int ret;
+
+	mutex_lock(&chip->io_lock);
+	ret = max8925_write_device(i2c, reg, 1, &data);
+	mutex_unlock(&chip->io_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(max8925_reg_write);
+
+int max8925_bulk_read(struct i2c_client *i2c, int reg,
+		int count, unsigned char *buf)
+{
+	struct max8925_chip *chip = i2c_get_clientdata(i2c);
+	int ret;
+
+	mutex_lock(&chip->io_lock);
+	ret = max8925_read_device(i2c, reg, count, buf);
+	mutex_unlock(&chip->io_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(max8925_bulk_read);
+
+int max8925_bulk_write(struct i2c_client *i2c, int reg,
+		int count, unsigned char *buf)
+{
+	struct max8925_chip *chip = i2c_get_clientdata(i2c);
+	int ret;
+
+	mutex_lock(&chip->io_lock);
+	ret = max8925_write_device(i2c, reg, count, buf);
+	mutex_unlock(&chip->io_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(max8925_bulk_write);
+
+int max8925_set_bits(struct i2c_client *i2c, int reg,
+		unsigned char mask, unsigned char data)
+{
+	struct max8925_chip *chip = i2c_get_clientdata(i2c);
+	unsigned char value;
+	int ret;
+
+	mutex_lock(&chip->io_lock);
+	ret = max8925_read_device(i2c, reg, 1, &value);
+	if (ret < 0)
+		goto out;
+	value &= ~mask;
+	value |= data;
+	ret = max8925_write_device(i2c, reg, 1, &value);
+out:
+	mutex_unlock(&chip->io_lock);
+	return ret;
+}
+EXPORT_SYMBOL(max8925_set_bits);
+
+
+static const struct i2c_device_id max8925_id_table[] = {
+	{ "max8925", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, max8925_id_table);
+
+static int __devinit max8925_probe(struct i2c_client *client,
+				   const struct i2c_device_id *id)
+{
+	struct max8925_platform_data *pdata = client->dev.platform_data;
+	struct max8925_chip *chip;
+
+	if (!pdata) {
+		pr_info("%s: platform data is missing\n", __func__);
+		return -EINVAL;
+	}
+	if ((pdata->chip_id <= MAX8925_INVALID)
+		|| (pdata->chip_id >= MAX8925_MAX)) {
+		pr_info("#%s: wrong chip identification\n", __func__);
+		return -EINVAL;
+	}
+
+	chip = kzalloc(sizeof(struct max8925_chip), GFP_KERNEL);
+	if (chip == NULL)
+		return -ENOMEM;
+	chip->i2c = client;
+	chip->chip_id = pdata->chip_id;
+	i2c_set_clientdata(client, chip);
+	chip->dev = &client->dev;
+	mutex_init(&chip->io_lock);
+	dev_set_drvdata(chip->dev, chip);
+	max8925_device_init(chip, pdata);
+
+	return 0;
+}
+
+static int __devexit max8925_remove(struct i2c_client *client)
+{
+	struct max8925_chip *chip = i2c_get_clientdata(client);
+
+	max8925_device_exit(chip);
+	i2c_set_clientdata(client, NULL);
+	kfree(chip);
+	return 0;
+}
+
+static struct i2c_driver max8925_driver = {
+	.driver	= {
+		.name	= "max8925",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= max8925_probe,
+	.remove		= __devexit_p(max8925_remove),
+	.id_table	= max8925_id_table,
+};
+
+static int __init max8925_i2c_init(void)
+{
+	int ret;
+
+	ret = i2c_add_driver(&max8925_driver);
+	if (ret != 0)
+		pr_err("Failed to register MAX8925 I2C driver: %d\n", ret);
+	return ret;
+}
+subsys_initcall(max8925_i2c_init);
+
+static void __exit max8925_i2c_exit(void)
+{
+	i2c_del_driver(&max8925_driver);
+}
+module_exit(max8925_i2c_exit);
+
+MODULE_DESCRIPTION("I2C Driver for Maxim 8925");
+MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>");
+MODULE_LICENSE("GPL");