Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 173 insertions, 0 deletions

diff --git a/drivers/mtd/nand/spia.c b/drivers/mtd/nand/spia.c
new file mode 100644
index 0000000..b777c41
--- /dev/null
+++ b/drivers/mtd/nand/spia.c
@@ -0,0 +1,173 @@
+/*
+ *  drivers/mtd/nand/spia.c
+ *
+ *  Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
+ *
+ *
+ *	10-29-2001 TG	change to support hardwarespecific access
+ *			to controllines	(due to change in nand.c)
+ *			page_cache added
+ *
+ * $Id: spia.c,v 1.24 2004/11/04 12:53:10 gleixner Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Overview:
+ *   This is a device driver for the NAND flash device found on the
+ *   SPIA board which utilizes the Toshiba TC58V64AFT part. This is
+ *   a 64Mibit (8MiB x 8 bits) NAND flash device.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <asm/io.h>
+
+/*
+ * MTD structure for SPIA board
+ */
+static struct mtd_info *spia_mtd = NULL;
+
+/*
+ * Values specific to the SPIA board (used with EP7212 processor)
+ */
+#define SPIA_IO_BASE	0xd0000000	/* Start of EP7212 IO address space */
+#define SPIA_FIO_BASE	0xf0000000	/* Address where flash is mapped */
+#define SPIA_PEDR	0x0080		/*
+					 * IO offset to Port E data register
+					 * where the CLE, ALE and NCE pins
+					 * are wired to.
+					 */
+#define SPIA_PEDDR	0x00c0		/*
+					 * IO offset to Port E data direction
+					 * register so we can control the IO
+					 * lines.
+					 */
+
+/*
+ * Module stuff
+ */
+
+static int spia_io_base = SPIA_IO_BASE;
+static int spia_fio_base = SPIA_FIO_BASE;
+static int spia_pedr = SPIA_PEDR;
+static int spia_peddr = SPIA_PEDDR;
+
+module_param(spia_io_base, int, 0);
+module_param(spia_fio_base, int, 0);
+module_param(spia_pedr, int, 0);
+module_param(spia_peddr, int, 0);
+
+/*
+ * Define partitions for flash device
+ */
+const static struct mtd_partition partition_info[] = {
+	{
+		.name	= "SPIA flash partition 1",
+		.offset	= 0,
+		.size	= 2*1024*1024
+	},
+	{
+		.name	= "SPIA flash partition 2",
+		.offset	= 2*1024*1024,
+		.size	= 6*1024*1024
+	}
+};
+#define NUM_PARTITIONS 2
+
+
+/* 
+ *	hardware specific access to control-lines
+*/
+static void spia_hwcontrol(struct mtd_info *mtd, int cmd){
+
+    switch(cmd){
+
+	case NAND_CTL_SETCLE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) |=  0x01; break;
+	case NAND_CTL_CLRCLE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) &= ~0x01; break;
+
+	case NAND_CTL_SETALE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) |=  0x02; break;
+	case NAND_CTL_CLRALE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) &= ~0x02; break;
+
+	case NAND_CTL_SETNCE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) &= ~0x04; break;
+	case NAND_CTL_CLRNCE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) |=  0x04; break;
+    }
+}
+
+/*
+ * Main initialization routine
+ */
+int __init spia_init (void)
+{
+	struct nand_chip *this;
+
+	/* Allocate memory for MTD device structure and private data */
+	spia_mtd = kmalloc (sizeof(struct mtd_info) + sizeof (struct nand_chip),
+				GFP_KERNEL);
+	if (!spia_mtd) {
+		printk ("Unable to allocate SPIA NAND MTD device structure.\n");
+		return -ENOMEM;
+	}
+
+	/* Get pointer to private data */
+	this = (struct nand_chip *) (&spia_mtd[1]);
+
+	/* Initialize structures */
+	memset((char *) spia_mtd, 0, sizeof(struct mtd_info));
+	memset((char *) this, 0, sizeof(struct nand_chip));
+
+	/* Link the private data with the MTD structure */
+	spia_mtd->priv = this;
+
+	/*
+	 * Set GPIO Port E control register so that the pins are configured
+	 * to be outputs for controlling the NAND flash.
+	 */
+	(*(volatile unsigned char *) (spia_io_base + spia_peddr)) = 0x07;
+
+	/* Set address of NAND IO lines */
+	this->IO_ADDR_R = (void __iomem *) spia_fio_base;
+	this->IO_ADDR_W = (void __iomem *) spia_fio_base;
+	/* Set address of hardware control function */
+	this->hwcontrol = spia_hwcontrol;
+	/* 15 us command delay time */
+	this->chip_delay = 15;		
+
+	/* Scan to find existence of the device */
+	if (nand_scan (spia_mtd, 1)) {
+		kfree (spia_mtd);
+		return -ENXIO;
+	}
+
+	/* Register the partitions */
+	add_mtd_partitions(spia_mtd, partition_info, NUM_PARTITIONS);
+
+	/* Return happy */
+	return 0;
+}
+module_init(spia_init);
+
+/*
+ * Clean up routine
+ */
+#ifdef MODULE
+static void __exit spia_cleanup (void)
+{
+	/* Release resources, unregister device */
+	nand_release (spia_mtd);
+
+	/* Free the MTD device structure */
+	kfree (spia_mtd);
+}
+module_exit(spia_cleanup);
+#endif
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Steven J. Hill <sjhill@realitydiluted.com");
+MODULE_DESCRIPTION("Board-specific glue layer for NAND flash on SPIA board");