Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

Conflicts:

	drivers/net/hp-plus.c
	drivers/net/wireless/ath5k/base.c
	drivers/net/wireless/ath9k/recv.c
	net/wireless/reg.c

2 files changed, 66 insertions, 11 deletions

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index b344a0b..29546a2 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -227,8 +227,17 @@ struct phy_device * get_phy_device(struct mii_bus *bus, int addr)
 	if (r)
 		return ERR_PTR(r);
 
-	/* If the phy_id is all Fs or all 0s, there is no device there */
-	if ((0xffff == phy_id) || (0x00 == phy_id))
+	/* If the phy_id is mostly Fs, there is no device there */
+	if ((phy_id & 0x1fffffff) == 0x1fffffff)
+		return NULL;
+
+	/*
+	 * Broken hardware is sometimes missing the pull down resistor on the
+	 * MDIO line, which results in reads to non-existent devices returning
+	 * 0 rather than 0xffff. Catch this here and treat 0 as a non-existent
+	 * device as well.
+	 */
+	if (phy_id == 0)
 		return NULL;
 
 	dev = phy_device_create(bus, addr, phy_id);
diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c
index 8874497..dd3b244 100644
--- a/drivers/net/phy/vitesse.c
+++ b/drivers/net/phy/vitesse.c
@@ -34,6 +34,8 @@
 #define MII_VSC8244_IMASK_DUPLEX	0x1000
 #define MII_VSC8244_IMASK_MASK		0xf000
 
+#define MII_VSC8221_IMASK_MASK		0xa000
+
 /* Vitesse Interrupt Status Register */
 #define MII_VSC8244_ISTAT		0x1a
 #define MII_VSC8244_ISTAT_STATUS	0x8000
@@ -49,6 +51,12 @@
 #define MII_VSC8244_AUXCONSTAT_GBIT    	0x0010
 #define MII_VSC8244_AUXCONSTAT_100     	0x0008
 
+#define MII_VSC8221_AUXCONSTAT_INIT	0x0004 /* need to set this bit? */
+#define MII_VSC8221_AUXCONSTAT_RESERVED	0x0004
+
+#define PHY_ID_VSC8244			0x000fc6c0
+#define PHY_ID_VSC8221			0x000fc550
+
 MODULE_DESCRIPTION("Vitesse PHY driver");
 MODULE_AUTHOR("Kriston Carson");
 MODULE_LICENSE("GPL");
@@ -95,13 +103,15 @@ static int vsc824x_ack_interrupt(struct phy_device *phydev)
 	return (err < 0) ? err : 0;
 }
 
-static int vsc824x_config_intr(struct phy_device *phydev)
+static int vsc82xx_config_intr(struct phy_device *phydev)
 {
 	int err;
 
 	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
 		err = phy_write(phydev, MII_VSC8244_IMASK,
-				MII_VSC8244_IMASK_MASK);
+			phydev->drv->phy_id == PHY_ID_VSC8244 ?
+				MII_VSC8244_IMASK_MASK :
+				MII_VSC8221_IMASK_MASK);
 	else {
 		/*
 		 * The Vitesse PHY cannot clear the interrupt
@@ -120,7 +130,7 @@ static int vsc824x_config_intr(struct phy_device *phydev)
 
 /* Vitesse 824x */
 static struct phy_driver vsc8244_driver = {
-	.phy_id		= 0x000fc6c0,
+	.phy_id		= PHY_ID_VSC8244,
 	.name		= "Vitesse VSC8244",
 	.phy_id_mask	= 0x000fffc0,
 	.features	= PHY_GBIT_FEATURES,
@@ -129,19 +139,55 @@ static struct phy_driver vsc8244_driver = {
 	.config_aneg	= &genphy_config_aneg,
 	.read_status	= &genphy_read_status,
 	.ack_interrupt	= &vsc824x_ack_interrupt,
-	.config_intr	= &vsc824x_config_intr,
+	.config_intr	= &vsc82xx_config_intr,
 	.driver 	= { .owner = THIS_MODULE,},
 };
 
-static int __init vsc8244_init(void)
+static int vsc8221_config_init(struct phy_device *phydev)
 {
-	return phy_driver_register(&vsc8244_driver);
+	int err;
+
+	err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT,
+			MII_VSC8221_AUXCONSTAT_INIT);
+	return err;
+
+	/* Perhaps we should set EXT_CON1 based on the interface?
+	   Options are 802.3Z SerDes or SGMII */
+}
+
+/* Vitesse 8221 */
+static struct phy_driver vsc8221_driver = {
+	.phy_id		= PHY_ID_VSC8221,
+	.phy_id_mask	= 0x000ffff0,
+	.name		= "Vitesse VSC8221",
+	.features	= PHY_GBIT_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.config_init	= &vsc8221_config_init,
+	.config_aneg	= &genphy_config_aneg,
+	.read_status	= &genphy_read_status,
+	.ack_interrupt	= &vsc824x_ack_interrupt,
+	.config_intr	= &vsc82xx_config_intr,
+	.driver 	= { .owner = THIS_MODULE,},
+};
+
+static int __init vsc82xx_init(void)
+{
+	int err;
+
+	err = phy_driver_register(&vsc8244_driver);
+	if (err < 0)
+		return err;
+	err = phy_driver_register(&vsc8221_driver);
+	if (err < 0)
+		phy_driver_unregister(&vsc8244_driver);
+	return err;
 }
 
-static void __exit vsc8244_exit(void)
+static void __exit vsc82xx_exit(void)
 {
 	phy_driver_unregister(&vsc8244_driver);
+	phy_driver_unregister(&vsc8221_driver);
 }
 
-module_init(vsc8244_init);
-module_exit(vsc8244_exit);
+module_init(vsc82xx_init);
+module_exit(vsc82xx_exit);