tulip: implement wake-on-lan support

Based on a patch from http://simon.baatz.info/wol-support-for-an983b/

Tested to resume from suspend by magic packet.

Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 48 insertions, 16 deletions

diff --git a/drivers/net/tulip/tulip.h b/drivers/net/tulip/tulip.h
index 0afa2d4..e525875 100644
--- a/drivers/net/tulip/tulip.h
+++ b/drivers/net/tulip/tulip.h
@@ -20,6 +20,7 @@
 #include <linux/types.h>
 #include <linux/spinlock.h>
 #include <linux/netdevice.h>
+#include <linux/ethtool.h>
 #include <linux/timer.h>
 #include <linux/delay.h>
 #include <linux/pci.h>
@@ -51,22 +52,23 @@ struct tulip_chip_table {
 
 
 enum tbl_flag {
-	HAS_MII			= 0x0001,
-	HAS_MEDIA_TABLE		= 0x0002,
-	CSR12_IN_SROM		= 0x0004,
-	ALWAYS_CHECK_MII	= 0x0008,
-	HAS_ACPI		= 0x0010,
-	MC_HASH_ONLY		= 0x0020, /* Hash-only multicast filter. */
-	HAS_PNICNWAY		= 0x0080,
-	HAS_NWAY		= 0x0040, /* Uses internal NWay xcvr. */
-	HAS_INTR_MITIGATION	= 0x0100,
-	IS_ASIX			= 0x0200,
-	HAS_8023X		= 0x0400,
-	COMET_MAC_ADDR		= 0x0800,
-	HAS_PCI_MWI		= 0x1000,
-	HAS_PHY_IRQ		= 0x2000,
-	HAS_SWAPPED_SEEPROM	= 0x4000,
-	NEEDS_FAKE_MEDIA_TABLE	= 0x8000,
+	HAS_MII			= 0x00001,
+	HAS_MEDIA_TABLE		= 0x00002,
+	CSR12_IN_SROM		= 0x00004,
+	ALWAYS_CHECK_MII	= 0x00008,
+	HAS_ACPI		= 0x00010,
+	MC_HASH_ONLY		= 0x00020, /* Hash-only multicast filter. */
+	HAS_PNICNWAY		= 0x00080,
+	HAS_NWAY		= 0x00040, /* Uses internal NWay xcvr. */
+	HAS_INTR_MITIGATION	= 0x00100,
+	IS_ASIX			= 0x00200,
+	HAS_8023X		= 0x00400,
+	COMET_MAC_ADDR		= 0x00800,
+	HAS_PCI_MWI		= 0x01000,
+	HAS_PHY_IRQ		= 0x02000,
+	HAS_SWAPPED_SEEPROM	= 0x04000,
+	NEEDS_FAKE_MEDIA_TABLE	= 0x08000,
+	COMET_PM		= 0x10000,
 };
 
 
@@ -120,6 +122,11 @@ enum tulip_offsets {
 	CSR13 = 0x68,
 	CSR14 = 0x70,
 	CSR15 = 0x78,
+	CSR18 = 0x88,
+	CSR19 = 0x8c,
+	CSR20 = 0x90,
+	CSR27 = 0xAC,
+	CSR28 = 0xB0,
 };
 
 /* register offset and bits for CFDD PCI config reg */
@@ -289,6 +296,30 @@ enum t21143_csr6_bits {
 	csr6_mask_100bt = (csr6_scr | csr6_pcs | csr6_hbd),
 };
 
+enum tulip_comet_csr13_bits {
+/* The LINKOFFE and LINKONE work in conjunction with LSCE, i.e. they
+ * determine which link status transition wakes up if LSCE is
+ * enabled */
+        comet_csr13_linkoffe = (1 << 17),
+        comet_csr13_linkone = (1 << 16),
+        comet_csr13_wfre = (1 << 10),
+        comet_csr13_mpre = (1 << 9),
+        comet_csr13_lsce = (1 << 8),
+        comet_csr13_wfr = (1 << 2),
+        comet_csr13_mpr = (1 << 1),
+        comet_csr13_lsc = (1 << 0),
+};
+
+enum tulip_comet_csr18_bits {
+        comet_csr18_pmes_sticky = (1 << 24),
+        comet_csr18_pm_mode = (1 << 19),
+        comet_csr18_apm_mode = (1 << 18),
+        comet_csr18_d3a = (1 << 7)
+};
+
+enum tulip_comet_csr20_bits {
+        comet_csr20_pmes = (1 << 15),
+};
 
 /* Keep the ring sizes a power of two for efficiency.
    Making the Tx ring too large decreases the effectiveness of channel
@@ -411,6 +442,7 @@ struct tulip_private {
 	unsigned int csr6;	/* Current CSR6 control settings. */
 	unsigned char eeprom[EEPROM_SIZE];	/* Serial EEPROM contents. */
 	void (*link_change) (struct net_device * dev, int csr5);
+        struct ethtool_wolinfo wolinfo;        /* WOL settings */
 	u16 sym_advertise, mii_advertise; /* NWay capabilities advertised.  */
 	u16 lpar;		/* 21143 Link partner ability. */
 	u16 advertising[4];