aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/regulator/max1586.c
diff options
context:
space:
mode:
authorPhilipp Zabel <philipp.zabel@gmail.com>2009-05-28 07:15:16 +0200
committerLiam Girdwood <lrg@slimlogic.co.uk>2009-06-15 11:18:26 +0100
commitb110a8fb242bc34e4b7686252899ce0fca956e2c (patch)
tree45a07fe5d288d269ddcdad7786bae1efe063cb6d /drivers/regulator/max1586.c
parent6113c3a5a63b8f0d5613b2a71cd1f5335a37b89a (diff)
downloadkernel_samsung_crespo-b110a8fb242bc34e4b7686252899ce0fca956e2c.zip
kernel_samsung_crespo-b110a8fb242bc34e4b7686252899ce0fca956e2c.tar.gz
kernel_samsung_crespo-b110a8fb242bc34e4b7686252899ce0fca956e2c.tar.bz2
regulator/max1586: support increased V3 voltage range
The V3 regulator can be configured with an external resistor connected to the feedback pin (R24 in the data sheet) to increase the voltage range. For example, hx4700 has R24 = 3.32 kOhm to achieve a maximum V3 voltage of 1.55 V which is needed for 624 MHz CPU frequency. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Diffstat (limited to 'drivers/regulator/max1586.c')
-rw-r--r--drivers/regulator/max1586.c71
1 files changed, 52 insertions, 19 deletions
diff --git a/drivers/regulator/max1586.c b/drivers/regulator/max1586.c
index bbbb55f..92799f4 100644
--- a/drivers/regulator/max1586.c
+++ b/drivers/regulator/max1586.c
@@ -29,7 +29,6 @@
#define MAX1586_V3_MIN_UV 700000
#define MAX1586_V3_MAX_UV 1475000
-#define MAX1586_V3_STEP_UV 25000
#define MAX1586_V6_MIN_UV 0
#define MAX1586_V6_MAX_UV 3000000
@@ -37,33 +36,52 @@
#define I2C_V3_SELECT (0 << 5)
#define I2C_V6_SELECT (1 << 5)
+struct max1586_data {
+ struct i2c_client *client;
+
+ /* min/max V3 voltage */
+ int min_uV;
+ int max_uV;
+
+ struct regulator_dev *rdev[0];
+};
+
/*
* V3 voltage
* On I2C bus, sending a "x" byte to the max1586 means :
* set V3 to 0.700V + (x & 0x1f) * 0.025V
+ * This voltage can be increased by external resistors
+ * R24 and R25=100kOhm as described in the data sheet.
+ * The gain is approximately: 1 + R24/R25 + R24/185.5kOhm
*/
-static int max1586_v3_calc_voltage(unsigned selector)
+static int max1586_v3_calc_voltage(struct max1586_data *max1586,
+ unsigned selector)
{
- return MAX1586_V3_MIN_UV + (MAX1586_V3_STEP_UV * selector);
+ unsigned range_uV = max1586->max_uV - max1586->min_uV;
+
+ return max1586->min_uV + (selector * range_uV / MAX1586_V3_MAX_VSEL);
}
static int max1586_v3_set(struct regulator_dev *rdev, int min_uV, int max_uV)
{
- struct i2c_client *client = rdev_get_drvdata(rdev);
+ struct max1586_data *max1586 = rdev_get_drvdata(rdev);
+ struct i2c_client *client = max1586->client;
+ unsigned range_uV = max1586->max_uV - max1586->min_uV;
unsigned selector;
u8 v3_prog;
- if (min_uV < MAX1586_V3_MIN_UV || min_uV > MAX1586_V3_MAX_UV)
- return -EINVAL;
- if (max_uV < MAX1586_V3_MIN_UV || max_uV > MAX1586_V3_MAX_UV)
+ if (min_uV > max1586->max_uV || max_uV < max1586->min_uV)
return -EINVAL;
+ if (min_uV < max1586->min_uV)
+ min_uV = max1586->min_uV;
- selector = (min_uV - MAX1586_V3_MIN_UV) / MAX1586_V3_STEP_UV;
- if (max1586_v3_calc_voltage(selector) > max_uV)
+ selector = ((min_uV - max1586->min_uV) * MAX1586_V3_MAX_VSEL +
+ range_uV - 1) / range_uV;
+ if (max1586_v3_calc_voltage(max1586, selector) > max_uV)
return -EINVAL;
dev_dbg(&client->dev, "changing voltage v3 to %dmv\n",
- max1586_v3_calc_voltage(selector) / 1000);
+ max1586_v3_calc_voltage(max1586, selector) / 1000);
v3_prog = I2C_V3_SELECT | (u8) selector;
return i2c_smbus_write_byte(client, v3_prog);
@@ -71,9 +89,11 @@ static int max1586_v3_set(struct regulator_dev *rdev, int min_uV, int max_uV)
static int max1586_v3_list(struct regulator_dev *rdev, unsigned selector)
{
+ struct max1586_data *max1586 = rdev_get_drvdata(rdev);
+
if (selector > MAX1586_V3_MAX_VSEL)
return -EINVAL;
- return max1586_v3_calc_voltage(selector);
+ return max1586_v3_calc_voltage(max1586, selector);
}
/*
@@ -164,14 +184,25 @@ static int max1586_pmic_probe(struct i2c_client *client,
{
struct regulator_dev **rdev;
struct max1586_platform_data *pdata = client->dev.platform_data;
- int i, id, ret = 0;
+ struct max1586_data *max1586;
+ int i, id, ret = -ENOMEM;
+
+ max1586 = kzalloc(sizeof(struct max1586_data) +
+ sizeof(struct regulator_dev *) * (MAX1586_V6 + 1),
+ GFP_KERNEL);
+ if (!max1586)
+ goto out;
- rdev = kzalloc(sizeof(struct regulator_dev *) * (MAX1586_V6 + 1),
- GFP_KERNEL);
- if (!rdev)
- return -ENOMEM;
+ max1586->client = client;
- ret = -EINVAL;
+ if (!pdata->v3_gain) {
+ ret = -EINVAL;
+ goto out_unmap;
+ }
+ max1586->min_uV = MAX1586_V3_MIN_UV * pdata->v3_gain / 1000000;
+ max1586->max_uV = MAX1586_V3_MAX_UV * pdata->v3_gain / 1000000;
+
+ rdev = max1586->rdev;
for (i = 0; i < pdata->num_subdevs && i <= MAX1586_V6; i++) {
id = pdata->subdevs[i].id;
if (!pdata->subdevs[i].platform_data)
@@ -182,7 +213,7 @@ static int max1586_pmic_probe(struct i2c_client *client,
}
rdev[i] = regulator_register(&max1586_reg[id], &client->dev,
pdata->subdevs[i].platform_data,
- client);
+ max1586);
if (IS_ERR(rdev[i])) {
ret = PTR_ERR(rdev[i]);
dev_err(&client->dev, "failed to register %s\n",
@@ -198,7 +229,9 @@ static int max1586_pmic_probe(struct i2c_client *client,
err:
while (--i >= 0)
regulator_unregister(rdev[i]);
- kfree(rdev);
+out_unmap:
+ kfree(max1586);
+out:
return ret;
}