aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/spi
diff options
context:
space:
mode:
authorMike Frysinger <vapier@gentoo.org>2009-12-18 18:00:10 +0000
committerMike Frysinger <vapier@gentoo.org>2010-10-18 02:49:39 -0400
commit5e8592dca303fb429d1641c205fe509f4b781ca2 (patch)
tree14bbd03eeec15e99bb9ea1aefcb1a953be31159e /drivers/spi
parent5b47bcd48b3bd53c86040321de0d348aadebed87 (diff)
downloadkernel_samsung_crespo-5e8592dca303fb429d1641c205fe509f4b781ca2.zip
kernel_samsung_crespo-5e8592dca303fb429d1641c205fe509f4b781ca2.tar.gz
kernel_samsung_crespo-5e8592dca303fb429d1641c205fe509f4b781ca2.tar.bz2
spi/bfin_spi: combine duplicate SPI_CTL read/write logic
While combining things, also switch to the proper SPI bit define names. This lets us punt the rarely used SPI defines. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Diffstat (limited to 'drivers/spi')
-rw-r--r--drivers/spi/spi_bfin5xx.c40
1 files changed, 18 insertions, 22 deletions
diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c
index 376f2f0..b3450b7 100644
--- a/drivers/spi/spi_bfin5xx.c
+++ b/drivers/spi/spi_bfin5xx.c
@@ -560,8 +560,7 @@ static void bfin_spi_pump_transfers(unsigned long data)
struct spi_transfer *previous = NULL;
struct slave_data *chip = NULL;
unsigned int bits_per_word;
- u8 width;
- u16 cr, dma_width, dma_config;
+ u16 cr, cr_width, dma_width, dma_config;
u32 tranf_success = 1;
u8 full_duplex = 0;
@@ -642,22 +641,19 @@ static void bfin_spi_pump_transfers(unsigned long data)
bits_per_word = transfer->bits_per_word ? : message->spi->bits_per_word;
if (bits_per_word == 8) {
drv_data->n_bytes = 1;
- width = CFG_SPI_WORDSIZE8;
+ drv_data->len = transfer->len;
+ cr_width = 0;
drv_data->ops = &bfin_transfer_ops_u8;
} else {
drv_data->n_bytes = 2;
- width = CFG_SPI_WORDSIZE16;
+ drv_data->len = (transfer->len) >> 1;
+ cr_width = BIT_CTL_WORDSIZE;
drv_data->ops = &bfin_transfer_ops_u16;
}
- cr = (read_CTRL(drv_data) & (~BIT_CTL_TIMOD));
- cr |= (width << 8);
+ cr = read_CTRL(drv_data) & ~(BIT_CTL_TIMOD | BIT_CTL_WORDSIZE);
+ cr |= cr_width;
write_CTRL(drv_data, cr);
- if (width == CFG_SPI_WORDSIZE16) {
- drv_data->len = (transfer->len) >> 1;
- } else {
- drv_data->len = transfer->len;
- }
dev_dbg(&drv_data->pdev->dev,
"transfer: drv_data->ops is %p, chip->ops is %p, u8_ops is %p\n",
drv_data->ops, chip->ops, &bfin_transfer_ops_u8);
@@ -672,13 +668,12 @@ static void bfin_spi_pump_transfers(unsigned long data)
write_BAUD(drv_data, chip->baud);
write_STAT(drv_data, BIT_STAT_CLR);
- cr = (read_CTRL(drv_data) & (~BIT_CTL_TIMOD));
if (drv_data->cs_change)
bfin_spi_cs_active(drv_data, chip);
dev_dbg(&drv_data->pdev->dev,
"now pumping a transfer: width is %d, len is %d\n",
- width, transfer->len);
+ cr_width, transfer->len);
/*
* Try to map dma buffer and do a dma transfer. If successful use,
@@ -697,7 +692,7 @@ static void bfin_spi_pump_transfers(unsigned long data)
/* config dma channel */
dev_dbg(&drv_data->pdev->dev, "doing dma transfer\n");
set_dma_x_count(drv_data->dma_channel, drv_data->len);
- if (width == CFG_SPI_WORDSIZE16) {
+ if (cr_width == BIT_CTL_WORDSIZE) {
set_dma_x_modify(drv_data->dma_channel, 2);
dma_width = WDSIZE_16;
} else {
@@ -786,10 +781,16 @@ static void bfin_spi_pump_transfers(unsigned long data)
return;
}
+ /*
+ * We always use SPI_WRITE mode (transfer starts with TDBR write).
+ * SPI_READ mode (transfer starts with RDBR read) seems to have
+ * problems with setting up the output value in TDBR prior to the
+ * start of the transfer.
+ */
+ write_CTRL(drv_data, cr | BIT_CTL_TXMOD);
+
if (chip->pio_interrupt) {
- /* use write mode. spi irq should have been disabled */
- cr = (read_CTRL(drv_data) & (~BIT_CTL_TIMOD));
- write_CTRL(drv_data, (cr | CFG_SPI_WRITE));
+ /* SPI irq should have been disabled by now */
/* discard old RX data and clear RXS */
bfin_spi_dummy_read(drv_data);
@@ -813,11 +814,6 @@ static void bfin_spi_pump_transfers(unsigned long data)
/* IO mode */
dev_dbg(&drv_data->pdev->dev, "doing IO transfer\n");
- /* we always use SPI_WRITE mode. SPI_READ mode
- seems to have problems with setting up the
- output value in TDBR prior to the transfer. */
- write_CTRL(drv_data, (cr | CFG_SPI_WRITE));
-
if (full_duplex) {
/* full duplex mode */
BUG_ON((drv_data->tx_end - drv_data->tx) !=