lcd: add SPI-based LCD and backlight driver for SHARP corgi/spitz

The driver is based on different source files including corgi_ssp.c,
corgi_lcd.c and corgi_bl.c, previously authored by Richard Purdie
and many others.

The LCD and Backlight device actually share the same SPI device, so
they are made into this single driver.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

3 files changed, 549 insertions, 0 deletions

diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 452b770..f5406cd 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -24,6 +24,13 @@ config LCD_CLASS_DEVICE
 	  To have support for your specific LCD panel you will have to
 	  select the proper drivers which depend on this option.
 
+config LCD_CORGI
+	tristate "LCD Panel support for SHARP corgi/spitz model"
+	depends on LCD_CLASS_DEVICE && SPI_MASTER && PXA_SHARPSL
+	help
+	  Say y here to support the LCD panels usually found on SHARP
+	  corgi (C7x0) and spitz (Cxx00) models.
+
 config LCD_LTV350QV
 	tristate "Samsung LTV350QV LCD Panel"
 	depends on LCD_CLASS_DEVICE && SPI_MASTER
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index b405aac..cf12d58 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -1,6 +1,7 @@
 # Backlight & LCD drivers
 
 obj-$(CONFIG_LCD_CLASS_DEVICE)     += lcd.o
+obj-$(CONFIG_LCD_CORGI)		   += corgi_lcd.o
 obj-$(CONFIG_LCD_LTV350QV)	   += ltv350qv.o
 obj-$(CONFIG_LCD_ILI9320)	   += ili9320.o
 obj-$(CONFIG_LCD_PLATFORM)	   += platform_lcd.o
diff --git a/drivers/video/backlight/corgi_lcd.c b/drivers/video/backlight/corgi_lcd.c
new file mode 100644
index 0000000..bf69e50
--- /dev/null
+++ b/drivers/video/backlight/corgi_lcd.c
@@ -0,0 +1,541 @@
+/*
+ *  LCD/Backlight Driver for Sharp Zaurus Handhelds (various models)
+ *
+ *  Copyright (c) 2004-2006 Richard Purdie
+ *
+ *  Based on Sharp's 2.4 Backlight Driver
+ *
+ *  Copyright (c) 2008 Marvell International Ltd.
+ *  	Converted to SPI device based LCD/Backlight device driver
+ *  	by Eric Miao <eric.miao@marvell.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/lcd.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/corgi_lcd.h>
+#include <asm/mach/sharpsl_param.h>
+
+#define POWER_IS_ON(pwr)	((pwr) <= FB_BLANK_NORMAL)
+
+/* Register Addresses */
+#define RESCTL_ADRS     0x00
+#define PHACTRL_ADRS    0x01
+#define DUTYCTRL_ADRS   0x02
+#define POWERREG0_ADRS  0x03
+#define POWERREG1_ADRS  0x04
+#define GPOR3_ADRS      0x05
+#define PICTRL_ADRS     0x06
+#define POLCTRL_ADRS    0x07
+
+/* Register Bit Definitions */
+#define RESCTL_QVGA     0x01
+#define RESCTL_VGA      0x00
+
+#define POWER1_VW_ON    0x01  /* VW Supply FET ON */
+#define POWER1_GVSS_ON  0x02  /* GVSS(-8V) Power Supply ON */
+#define POWER1_VDD_ON   0x04  /* VDD(8V),SVSS(-4V) Power Supply ON */
+
+#define POWER1_VW_OFF   0x00  /* VW Supply FET OFF */
+#define POWER1_GVSS_OFF 0x00  /* GVSS(-8V) Power Supply OFF */
+#define POWER1_VDD_OFF  0x00  /* VDD(8V),SVSS(-4V) Power Supply OFF */
+
+#define POWER0_COM_DCLK 0x01  /* COM Voltage DC Bias DAC Serial Data Clock */
+#define POWER0_COM_DOUT 0x02  /* COM Voltage DC Bias DAC Serial Data Out */
+#define POWER0_DAC_ON   0x04  /* DAC Power Supply ON */
+#define POWER0_COM_ON   0x08  /* COM Power Supply ON */
+#define POWER0_VCC5_ON  0x10  /* VCC5 Power Supply ON */
+
+#define POWER0_DAC_OFF  0x00  /* DAC Power Supply OFF */
+#define POWER0_COM_OFF  0x00  /* COM Power Supply OFF */
+#define POWER0_VCC5_OFF 0x00  /* VCC5 Power Supply OFF */
+
+#define PICTRL_INIT_STATE      0x01
+#define PICTRL_INIOFF          0x02
+#define PICTRL_POWER_DOWN      0x04
+#define PICTRL_COM_SIGNAL_OFF  0x08
+#define PICTRL_DAC_SIGNAL_OFF  0x10
+
+#define POLCTRL_SYNC_POL_FALL  0x01
+#define POLCTRL_EN_POL_FALL    0x02
+#define POLCTRL_DATA_POL_FALL  0x04
+#define POLCTRL_SYNC_ACT_H     0x08
+#define POLCTRL_EN_ACT_L       0x10
+
+#define POLCTRL_SYNC_POL_RISE  0x00
+#define POLCTRL_EN_POL_RISE    0x00
+#define POLCTRL_DATA_POL_RISE  0x00
+#define POLCTRL_SYNC_ACT_L     0x00
+#define POLCTRL_EN_ACT_H       0x00
+
+#define PHACTRL_PHASE_MANUAL   0x01
+#define DEFAULT_PHAD_QVGA     (9)
+#define DEFAULT_COMADJ        (125)
+
+struct corgi_lcd {
+	struct spi_device	*spi_dev;
+	struct lcd_device	*lcd_dev;
+	struct backlight_device	*bl_dev;
+
+	int	intensity;
+	int	power;
+	int	mode;
+	char	buf[2];
+
+	void (*notify)(int intensity);
+	void (*kick_battery)(void);
+};
+
+static int corgi_ssp_lcdtg_send(struct corgi_lcd *lcd, int reg, uint8_t val);
+
+/*
+ * This is only a psuedo I2C interface. We can't use the standard kernel
+ * routines as the interface is write only. We just assume the data is acked...
+ */
+static void lcdtg_ssp_i2c_send(struct corgi_lcd *lcd, uint8_t data)
+{
+	corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS, data);
+	udelay(10);
+}
+
+static void lcdtg_i2c_send_bit(struct corgi_lcd *lcd, uint8_t data)
+{
+	lcdtg_ssp_i2c_send(lcd, data);
+	lcdtg_ssp_i2c_send(lcd, data | POWER0_COM_DCLK);
+	lcdtg_ssp_i2c_send(lcd, data);
+}
+
+static void lcdtg_i2c_send_start(struct corgi_lcd *lcd, uint8_t base)
+{
+	lcdtg_ssp_i2c_send(lcd, base | POWER0_COM_DCLK | POWER0_COM_DOUT);
+	lcdtg_ssp_i2c_send(lcd, base | POWER0_COM_DCLK);
+	lcdtg_ssp_i2c_send(lcd, base);
+}
+
+static void lcdtg_i2c_send_stop(struct corgi_lcd *lcd, uint8_t base)
+{
+	lcdtg_ssp_i2c_send(lcd, base);
+	lcdtg_ssp_i2c_send(lcd, base | POWER0_COM_DCLK);
+	lcdtg_ssp_i2c_send(lcd, base | POWER0_COM_DCLK | POWER0_COM_DOUT);
+}
+
+static void lcdtg_i2c_send_byte(struct corgi_lcd *lcd,
+				uint8_t base, uint8_t data)
+{
+	int i;
+	for (i = 0; i < 8; i++) {
+		if (data & 0x80)
+			lcdtg_i2c_send_bit(lcd, base | POWER0_COM_DOUT);
+		else
+			lcdtg_i2c_send_bit(lcd, base);
+		data <<= 1;
+	}
+}
+
+static void lcdtg_i2c_wait_ack(struct corgi_lcd *lcd, uint8_t base)
+{
+	lcdtg_i2c_send_bit(lcd, base);
+}
+
+static void lcdtg_set_common_voltage(struct corgi_lcd *lcd,
+				     uint8_t base_data, uint8_t data)
+{
+	/* Set Common Voltage to M62332FP via I2C */
+	lcdtg_i2c_send_start(lcd, base_data);
+	lcdtg_i2c_send_byte(lcd, base_data, 0x9c);
+	lcdtg_i2c_wait_ack(lcd, base_data);
+	lcdtg_i2c_send_byte(lcd, base_data, 0x00);
+	lcdtg_i2c_wait_ack(lcd, base_data);
+	lcdtg_i2c_send_byte(lcd, base_data, data);
+	lcdtg_i2c_wait_ack(lcd, base_data);
+	lcdtg_i2c_send_stop(lcd, base_data);
+}
+
+static int corgi_ssp_lcdtg_send(struct corgi_lcd *lcd, int adrs, uint8_t data)
+{
+	struct spi_message msg;
+	struct spi_transfer xfer = {
+		.len		= 1,
+		.cs_change	= 1,
+		.tx_buf		= lcd->buf,
+	};
+
+	lcd->buf[0] = ((adrs & 0x07) << 5) | (data & 0x1f);
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer, &msg);
+
+	return spi_sync(lcd->spi_dev, &msg);
+}
+
+/* Set Phase Adjust */
+static void lcdtg_set_phadadj(struct corgi_lcd *lcd, int mode)
+{
+	int adj;
+
+	switch(mode) {
+	case CORGI_LCD_MODE_VGA:
+		/* Setting for VGA */
+		adj = sharpsl_param.phadadj;
+		adj = (adj < 0) ? PHACTRL_PHASE_MANUAL :
+				  PHACTRL_PHASE_MANUAL | ((adj & 0xf) << 1);
+		break;
+	case CORGI_LCD_MODE_QVGA:
+	default:
+		/* Setting for QVGA */
+		adj = (DEFAULT_PHAD_QVGA << 1) | PHACTRL_PHASE_MANUAL;
+		break;
+	}
+
+	corgi_ssp_lcdtg_send(lcd, PHACTRL_ADRS, adj);
+}
+
+static void corgi_lcd_power_on(struct corgi_lcd *lcd)
+{
+	int comadj;
+
+	/* Initialize Internal Logic & Port */
+	corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS,
+			PICTRL_POWER_DOWN | PICTRL_INIOFF |
+			PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF |
+			PICTRL_DAC_SIGNAL_OFF);
+
+	corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
+			POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_OFF |
+			POWER0_COM_OFF | POWER0_VCC5_OFF);
+
+	corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
+			POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
+
+	/* VDD(+8V), SVSS(-4V) ON */
+	corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
+			POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
+	mdelay(3);
+
+	/* DAC ON */
+	corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
+			POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON |
+			POWER0_COM_OFF | POWER0_VCC5_OFF);
+
+	/* INIB = H, INI = L  */
+	/* PICTL[0] = H , PICTL[1] = PICTL[2] = PICTL[4] = L */
+	corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS,
+			PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF);
+
+	/* Set Common Voltage */
+	comadj = sharpsl_param.comadj;
+	if (comadj < 0)
+		comadj = DEFAULT_COMADJ;
+
+	lcdtg_set_common_voltage(lcd, POWER0_DAC_ON | POWER0_COM_OFF |
+				 POWER0_VCC5_OFF, comadj);
+
+	/* VCC5 ON, DAC ON */
+	corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
+			POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON |
+			POWER0_COM_OFF | POWER0_VCC5_ON);
+
+	/* GVSS(-8V) ON, VDD ON */
+	corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
+			POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
+	mdelay(2);
+
+	/* COM SIGNAL ON (PICTL[3] = L) */
+	corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS, PICTRL_INIT_STATE);
+
+	/* COM ON, DAC ON, VCC5_ON */
+	corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
+			POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON |
+			POWER0_COM_ON | POWER0_VCC5_ON);
+
+	/* VW ON, GVSS ON, VDD ON */
+	corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
+			POWER1_VW_ON | POWER1_GVSS_ON | POWER1_VDD_ON);
+
+	/* Signals output enable */
+	corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS, 0);
+
+	/* Set Phase Adjust */
+	lcdtg_set_phadadj(lcd, lcd->mode);
+
+	/* Initialize for Input Signals from ATI */
+	corgi_ssp_lcdtg_send(lcd, POLCTRL_ADRS,
+			POLCTRL_SYNC_POL_RISE | POLCTRL_EN_POL_RISE |
+			POLCTRL_DATA_POL_RISE | POLCTRL_SYNC_ACT_L |
+			POLCTRL_EN_ACT_H);
+	udelay(1000);
+
+	switch (lcd->mode) {
+	case CORGI_LCD_MODE_VGA:
+		corgi_ssp_lcdtg_send(lcd, RESCTL_ADRS, RESCTL_VGA);
+		break;
+	case CORGI_LCD_MODE_QVGA:
+	default:
+		corgi_ssp_lcdtg_send(lcd, RESCTL_ADRS, RESCTL_QVGA);
+		break;
+	}
+}
+
+static void corgi_lcd_power_off(struct corgi_lcd *lcd)
+{
+	/* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */
+	msleep(34);
+
+	/* (1)VW OFF */
+	corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
+			POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
+
+	/* (2)COM OFF */
+	corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS, PICTRL_COM_SIGNAL_OFF);
+	corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
+			POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON);
+
+	/* (3)Set Common Voltage Bias 0V */
+	lcdtg_set_common_voltage(lcd, POWER0_DAC_ON | POWER0_COM_OFF |
+			POWER0_VCC5_ON, 0);
+
+	/* (4)GVSS OFF */
+	corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
+			POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
+
+	/* (5)VCC5 OFF */
+	corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
+			POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF);
+
+	/* (6)Set PDWN, INIOFF, DACOFF */
+	corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS,
+			PICTRL_INIOFF | PICTRL_DAC_SIGNAL_OFF |
+			PICTRL_POWER_DOWN | PICTRL_COM_SIGNAL_OFF);
+
+	/* (7)DAC OFF */
+	corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
+			POWER0_DAC_OFF | POWER0_COM_OFF | POWER0_VCC5_OFF);
+
+	/* (8)VDD OFF */
+	corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
+			POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
+}
+
+static int corgi_lcd_set_mode(struct lcd_device *ld, struct fb_videomode *m)
+{
+	struct corgi_lcd *lcd = dev_get_drvdata(&ld->dev);
+	int mode = CORGI_LCD_MODE_QVGA;
+
+	if (m->xres == 640 || m->xres == 480)
+		mode = CORGI_LCD_MODE_VGA;
+
+	if (lcd->mode == mode)
+		return 0;
+
+	lcdtg_set_phadadj(lcd, mode);
+
+	switch (mode) {
+	case CORGI_LCD_MODE_VGA:
+		corgi_ssp_lcdtg_send(lcd, RESCTL_ADRS, RESCTL_VGA);
+		break;
+	case CORGI_LCD_MODE_QVGA:
+	default:
+		corgi_ssp_lcdtg_send(lcd, RESCTL_ADRS, RESCTL_QVGA);
+		break;
+	}
+
+	lcd->mode = mode;
+	return 0;
+}
+
+static int corgi_lcd_set_power(struct lcd_device *ld, int power)
+{
+	struct corgi_lcd *lcd = dev_get_drvdata(&ld->dev);
+
+	if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power))
+		corgi_lcd_power_on(lcd);
+
+	if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power))
+		corgi_lcd_power_off(lcd);
+
+	lcd->power = power;
+	return 0;
+}
+
+static int corgi_lcd_get_power(struct lcd_device *ld)
+{
+	struct corgi_lcd *lcd = dev_get_drvdata(&ld->dev);
+
+	return lcd->power;
+}
+
+static struct lcd_ops corgi_lcd_ops = {
+	.get_power	= corgi_lcd_get_power,
+	.set_power	= corgi_lcd_set_power,
+	.set_mode	= corgi_lcd_set_mode,
+};
+
+static int corgi_bl_get_intensity(struct backlight_device *bd)
+{
+	struct corgi_lcd *lcd = dev_get_drvdata(&bd->dev);
+
+	return lcd->intensity;
+}
+
+static int corgi_bl_set_intensity(struct corgi_lcd *lcd, int intensity)
+{
+	if (intensity > 0x10)
+		intensity += 0x10;
+
+	corgi_ssp_lcdtg_send(lcd, DUTYCTRL_ADRS, intensity);
+	lcd->intensity = intensity;
+
+	if (lcd->notify)
+		lcd->notify(intensity);
+
+	if (lcd->kick_battery)
+		lcd->kick_battery();
+
+	return 0;
+}
+
+static int corgi_bl_update_status(struct backlight_device *bd)
+{
+	struct corgi_lcd *lcd = dev_get_drvdata(&bd->dev);
+	int intensity = bd->props.brightness;
+
+	if (bd->props.power != FB_BLANK_UNBLANK)
+		intensity = 0;
+
+	if (bd->props.fb_blank != FB_BLANK_UNBLANK)
+		intensity = 0;
+
+	return corgi_bl_set_intensity(lcd, intensity);
+}
+
+static struct backlight_ops corgi_bl_ops = {
+	.get_brightness	= corgi_bl_get_intensity,
+	.update_status  = corgi_bl_update_status,
+};
+
+#ifdef CONFIG_PM
+static int corgi_lcd_suspend(struct spi_device *spi, pm_message_t state)
+{
+	struct corgi_lcd *lcd = dev_get_drvdata(&spi->dev);
+
+	corgi_bl_set_intensity(lcd, 0);
+	corgi_lcd_set_power(lcd->lcd_dev, FB_BLANK_POWERDOWN);
+	return 0;
+}
+
+static int corgi_lcd_resume(struct spi_device *spi)
+{
+	struct corgi_lcd *lcd = dev_get_drvdata(&spi->dev);
+
+	corgi_lcd_set_power(lcd->lcd_dev, FB_BLANK_UNBLANK);
+	backlight_update_status(lcd->bl_dev);
+	return 0;
+}
+#else
+#define corgi_lcd_suspend	NULL
+#define corgi_lcd_resume	NULL
+#endif
+
+static int __devinit corgi_lcd_probe(struct spi_device *spi)
+{
+	struct corgi_lcd_platform_data *pdata = spi->dev.platform_data;
+	struct corgi_lcd *lcd;
+	int ret = 0;
+
+	if (pdata == NULL) {
+		dev_err(&spi->dev, "platform data not available\n");
+		return -EINVAL;
+	}
+
+	lcd = kzalloc(sizeof(struct corgi_lcd), GFP_KERNEL);
+	if (!lcd) {
+		dev_err(&spi->dev, "failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	lcd->spi_dev = spi;
+
+	lcd->lcd_dev = lcd_device_register("corgi_lcd", &spi->dev,
+					lcd, &corgi_lcd_ops);
+	if (IS_ERR(lcd->lcd_dev)) {
+		ret = PTR_ERR(lcd->lcd_dev);
+		goto err_free_lcd;
+	}
+	lcd->power = FB_BLANK_POWERDOWN;
+	lcd->mode = (pdata) ? pdata->init_mode : CORGI_LCD_MODE_VGA;
+
+	lcd->bl_dev = backlight_device_register("corgi_bl", &spi->dev,
+					lcd, &corgi_bl_ops);
+	if (IS_ERR(lcd->bl_dev)) {
+		ret = PTR_ERR(lcd->bl_dev);
+		goto err_unregister_lcd;
+	}
+	lcd->bl_dev->props.max_brightness = pdata->max_intensity;
+	lcd->bl_dev->props.brightness = pdata->default_intensity;
+	lcd->bl_dev->props.power = FB_BLANK_UNBLANK;
+
+	lcd->notify = pdata->notify;
+	lcd->kick_battery = pdata->kick_battery;
+
+	dev_set_drvdata(&spi->dev, lcd);
+	corgi_lcd_set_power(lcd->lcd_dev, FB_BLANK_UNBLANK);
+	backlight_update_status(lcd->bl_dev);
+	return 0;
+
+err_unregister_lcd:
+	lcd_device_unregister(lcd->lcd_dev);
+err_free_lcd:
+	kfree(lcd);
+	return ret;
+}
+
+static int __devexit corgi_lcd_remove(struct spi_device *spi)
+{
+	struct corgi_lcd *lcd = dev_get_drvdata(&spi->dev);
+
+	lcd->bl_dev->props.power = FB_BLANK_UNBLANK;
+	lcd->bl_dev->props.brightness = 0;
+	backlight_update_status(lcd->bl_dev);
+	backlight_device_unregister(lcd->bl_dev);
+
+	corgi_lcd_set_power(lcd->lcd_dev, FB_BLANK_POWERDOWN);
+	lcd_device_unregister(lcd->lcd_dev);
+	kfree(lcd);
+
+	return 0;
+}
+
+static struct spi_driver corgi_lcd_driver = {
+	.driver		= {
+		.name	= "corgi-lcd",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= corgi_lcd_probe,
+	.remove		= __devexit_p(corgi_lcd_remove),
+	.suspend	= corgi_lcd_suspend,
+	.resume		= corgi_lcd_resume,
+};
+
+static int __init corgi_lcd_init(void)
+{
+	return spi_register_driver(&corgi_lcd_driver);
+}
+module_init(corgi_lcd_init);
+
+static void __exit corgi_lcd_exit(void)
+{
+	spi_unregister_driver(&corgi_lcd_driver);
+}
+module_exit(corgi_lcd_exit);
+
+MODULE_DESCRIPTION("LCD and backlight driver for SHARP C7x0/Cxx00");
+MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>");
+MODULE_LICENSE("GPL");