Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 988 insertions, 0 deletions

diff --git a/include/asm-mips/sn/sn0/hubio.h b/include/asm-mips/sn/sn0/hubio.h
new file mode 100644
index 0000000..80cf6a5
--- /dev/null
+++ b/include/asm-mips/sn/sn0/hubio.h
@@ -0,0 +1,988 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/SN0/hubio.h>, Revision 1.80.
+ *
+ * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef	_ASM_SGI_SN_SN0_HUBIO_H
+#define	_ASM_SGI_SN_SN0_HUBIO_H
+
+/*
+ * Hub I/O interface registers
+ *
+ * All registers in this file are subject to change until Hub chip tapeout.
+ * In general, the longer software name should be used when available.
+ */
+
+/*
+ * Slightly friendlier names for some common registers.
+ * The hardware definitions follow.
+ */
+#define IIO_WIDGET		IIO_WID      /* Widget identification */
+#define IIO_WIDGET_STAT		IIO_WSTAT    /* Widget status register */
+#define IIO_WIDGET_CTRL		IIO_WCR	     /* Widget control register */
+#define IIO_WIDGET_TOUT		IIO_WRTO     /* Widget request timeout */
+#define IIO_WIDGET_FLUSH	IIO_WTFR     /* Widget target flush */
+#define IIO_PROTECT		IIO_ILAPR    /* IO interface protection */
+#define IIO_PROTECT_OVRRD	IIO_ILAPO    /* IO protect override */
+#define IIO_OUTWIDGET_ACCESS	IIO_IOWA     /* Outbound widget access */
+#define IIO_INWIDGET_ACCESS	IIO_IIWA     /* Inbound widget access */
+#define IIO_INDEV_ERR_MASK	IIO_IIDEM    /* Inbound device error mask */
+#define IIO_LLP_CSR		IIO_ILCSR    /* LLP control and status */
+#define IIO_LLP_LOG		IIO_ILLR     /* LLP log */
+#define IIO_XTALKCC_TOUT	IIO_IXCC     /* Xtalk credit count timeout*/
+#define IIO_XTALKTT_TOUT	IIO_IXTT     /* Xtalk tail timeout */
+#define IIO_IO_ERR_CLR		IIO_IECLR    /* IO error clear */
+#define IIO_BTE_CRB_CNT         IIO_IBCN     /* IO BTE CRB count */
+
+#define IIO_LLP_CSR_IS_UP		0x00002000
+#define	IIO_LLP_CSR_LLP_STAT_MASK	0x00003000
+#define	IIO_LLP_CSR_LLP_STAT_SHFT	12
+
+/* key to IIO_PROTECT_OVRRD */
+#define IIO_PROTECT_OVRRD_KEY	0x53474972756c6573ull	/* "SGIrules" */
+
+/* BTE register names */
+#define IIO_BTE_STAT_0		IIO_IBLS_0   /* Also BTE length/status 0 */
+#define IIO_BTE_SRC_0		IIO_IBSA_0   /* Also BTE source address  0 */
+#define IIO_BTE_DEST_0		IIO_IBDA_0   /* Also BTE dest. address 0 */
+#define IIO_BTE_CTRL_0		IIO_IBCT_0   /* Also BTE control/terminate 0 */
+#define IIO_BTE_NOTIFY_0 	IIO_IBNA_0   /* Also BTE notification 0 */
+#define IIO_BTE_INT_0		IIO_IBIA_0   /* Also BTE interrupt 0 */
+#define IIO_BTE_OFF_0		0	     /* Base offset from BTE 0 regs. */
+#define IIO_BTE_OFF_1	IIO_IBLS_1 - IIO_IBLS_0 /* Offset from base to BTE 1 */
+
+/* BTE register offsets from base */
+#define BTEOFF_STAT		0
+#define BTEOFF_SRC		(IIO_BTE_SRC_0 - IIO_BTE_STAT_0)
+#define BTEOFF_DEST		(IIO_BTE_DEST_0 - IIO_BTE_STAT_0)
+#define BTEOFF_CTRL		(IIO_BTE_CTRL_0 - IIO_BTE_STAT_0)
+#define BTEOFF_NOTIFY		(IIO_BTE_NOTIFY_0 - IIO_BTE_STAT_0)
+#define BTEOFF_INT		(IIO_BTE_INT_0 - IIO_BTE_STAT_0)
+
+
+/*
+ * The following definitions use the names defined in the IO interface
+ * document for ease of reference.  When possible, software should
+ * generally use the longer but clearer names defined above.
+ */
+
+#define IIO_BASE	0x400000
+#define IIO_BASE_BTE0	0x410000
+#define IIO_BASE_BTE1	0x420000
+#define IIO_BASE_PERF	0x430000
+#define IIO_PERF_CNT	0x430008
+
+#define IO_PERF_SETS	32
+
+#define IIO_WID		0x400000	/* Widget identification */
+#define IIO_WSTAT	0x400008	/* Widget status */
+#define IIO_WCR		0x400020	/* Widget control */
+
+#define	IIO_WSTAT_ECRAZY	(1ULL << 32)	/* Hub gone crazy */
+#define	IIO_WSTAT_TXRETRY	(1ULL << 9)	/* Hub Tx Retry timeout */
+#define	IIO_WSTAT_TXRETRY_MASK	(0x7F)
+#define	IIO_WSTAT_TXRETRY_SHFT	(16)
+#define	IIO_WSTAT_TXRETRY_CNT(w)	(((w) >> IIO_WSTAT_TXRETRY_SHFT) & \
+					  IIO_WSTAT_TXRETRY_MASK)
+
+#define IIO_ILAPR	0x400100	/* Local Access Protection */
+#define IIO_ILAPO	0x400108	/* Protection override */
+#define IIO_IOWA	0x400110	/* outbound widget access */
+#define IIO_IIWA	0x400118	/* inbound widget access */
+#define IIO_IIDEM	0x400120	/* Inbound Device Error Mask */
+#define IIO_ILCSR	0x400128	/* LLP control and status */
+#define IIO_ILLR	0x400130	/* LLP Log */
+#define IIO_IIDSR	0x400138	/* Interrupt destination */
+
+#define IIO_IIBUSERR	0x1400208	/* Reads here cause a bus error. */
+
+/* IO Interrupt Destination Register */
+#define IIO_IIDSR_SENT_SHIFT	28
+#define IIO_IIDSR_SENT_MASK	0x10000000
+#define IIO_IIDSR_ENB_SHIFT	24
+#define IIO_IIDSR_ENB_MASK	0x01000000
+#define IIO_IIDSR_NODE_SHIFT	8
+#define IIO_IIDSR_NODE_MASK	0x0000ff00
+#define IIO_IIDSR_LVL_SHIFT	0
+#define IIO_IIDSR_LVL_MASK	0x0000003f
+
+
+/* GFX Flow Control Node/Widget Register */
+#define IIO_IGFX_0	0x400140	/* gfx node/widget register 0 */
+#define IIO_IGFX_1	0x400148	/* gfx node/widget register 1 */
+#define IIO_IGFX_W_NUM_BITS	4	/* size of widget num field */
+#define IIO_IGFX_W_NUM_MASK	((1<<IIO_IGFX_W_NUM_BITS)-1)
+#define IIO_IGFX_W_NUM_SHIFT	0
+#define IIO_IGFX_N_NUM_BITS	9	/* size of node num field */
+#define IIO_IGFX_N_NUM_MASK	((1<<IIO_IGFX_N_NUM_BITS)-1)
+#define IIO_IGFX_N_NUM_SHIFT	4
+#define IIO_IGFX_P_NUM_BITS	1	/* size of processor num field */
+#define IIO_IGFX_P_NUM_MASK	((1<<IIO_IGFX_P_NUM_BITS)-1)
+#define IIO_IGFX_P_NUM_SHIFT	16
+#define IIO_IGFX_VLD_BITS	1	/* size of valid field */
+#define IIO_IGFX_VLD_MASK	((1<<IIO_IGFX_VLD_BITS)-1)
+#define IIO_IGFX_VLD_SHIFT	20
+#define IIO_IGFX_INIT(widget, node, cpu, valid)				(\
+	(((widget) & IIO_IGFX_W_NUM_MASK) << IIO_IGFX_W_NUM_SHIFT) |	 \
+	(((node)   & IIO_IGFX_N_NUM_MASK) << IIO_IGFX_N_NUM_SHIFT) |	 \
+	(((cpu)    & IIO_IGFX_P_NUM_MASK) << IIO_IGFX_P_NUM_SHIFT) |	 \
+	(((valid)  & IIO_IGFX_VLD_MASK)   << IIO_IGFX_VLD_SHIFT)	 )
+
+/* Scratch registers (not all bits available) */
+#define IIO_SCRATCH_REG0	0x400150
+#define	IIO_SCRATCH_REG1	0x400158
+#define IIO_SCRATCH_MASK	0x0000000f00f11fff
+
+#define IIO_SCRATCH_BIT0_0	0x0000000800000000
+#define IIO_SCRATCH_BIT0_1	0x0000000400000000
+#define IIO_SCRATCH_BIT0_2	0x0000000200000000
+#define IIO_SCRATCH_BIT0_3	0x0000000100000000
+#define IIO_SCRATCH_BIT0_4	0x0000000000800000
+#define IIO_SCRATCH_BIT0_5	0x0000000000400000
+#define IIO_SCRATCH_BIT0_6	0x0000000000200000
+#define IIO_SCRATCH_BIT0_7	0x0000000000100000
+#define IIO_SCRATCH_BIT0_8	0x0000000000010000
+#define IIO_SCRATCH_BIT0_9	0x0000000000001000
+#define IIO_SCRATCH_BIT0_R	0x0000000000000fff
+
+/* IO Translation Table Entries */
+#define IIO_NUM_ITTES	7		/* ITTEs numbered 0..6 */
+					/* Hw manuals number them 1..7! */
+
+/*
+ * As a permanent workaround for a bug in the PI side of the hub, we've
+ * redefined big window 7 as small window 0.
+ */
+#define HUB_NUM_BIG_WINDOW	IIO_NUM_ITTES - 1
+
+/*
+ * Use the top big window as a surrogate for the first small window
+ */
+#define SWIN0_BIGWIN		HUB_NUM_BIG_WINDOW
+
+#define ILCSR_WARM_RESET	0x100
+/*
+ * The IO LLP control status register and widget control register
+ */
+#ifndef __ASSEMBLY__
+
+typedef union hubii_wid_u {
+	u64	wid_reg_value;
+	struct {
+		u64 	wid_rsvd: 	32,	/* unused */
+                   	wid_rev_num:	 4,	/* revision number */
+                   	wid_part_num:	16,	/* the widget type: hub=c101 */
+                   	wid_mfg_num:	11,	/* Manufacturer id (IBM) */
+                   	wid_rsvd1:	 1;	/* Reserved */
+        } wid_fields_s;
+} hubii_wid_t;
+
+
+typedef union hubii_wcr_u {
+	u64	wcr_reg_value;
+	struct {
+		u64 	wcr_rsvd: 	41,	/* unused */
+                   	wcr_e_thresh:	 5,	/* elasticity threshold */
+			wcr_dir_con:	 1,	/* widget direct connect */
+                   	wcr_f_bad_pkt:	 1,	/* Force bad llp pkt enable */
+                   	wcr_xbar_crd:	 3,	/* LLP crossbar credit */
+                   	wcr_rsvd1:	 8,	/* Reserved */
+			wcr_tag_mode:    1,	/* Tag mode */
+                   	wcr_widget_id:	 4;	/* LLP crossbar credit */
+        } wcr_fields_s;
+} hubii_wcr_t;
+
+#define	iwcr_dir_con	wcr_fields_s.wcr_dir_con
+
+typedef union hubii_wstat_u {
+	u64      reg_value;
+	struct {
+		u64	rsvd1:		31,
+			crazy:		 1,	/* Crazy bit		*/
+			rsvd2:		 8,
+			llp_tx_cnt:	 8, 	/* LLP Xmit retry counter */
+			rsvd3:		 6,
+			tx_max_rtry:	 1,	/* LLP Retry Timeout Signal */
+			rsvd4:		 2,
+			xt_tail_to:	 1,	/* Xtalk Tail Timeout	*/
+			xt_crd_to:	 1,	/* Xtalk Credit Timeout	*/
+			pending:	 4;	/* Pending Requests	*/
+	} wstat_fields_s;
+} hubii_wstat_t;
+
+
+typedef union hubii_ilcsr_u {
+	u64	icsr_reg_value;
+	struct {
+		u64 	icsr_rsvd: 	22,	/* unused */
+                   	icsr_max_burst:	10,	/* max burst */
+                        icsr_rsvd4:	 6,	/* reserved */
+                   	icsr_max_retry:	10,	/* max retry */
+                        icsr_rsvd3:	 2,	/* reserved */
+                        icsr_lnk_stat:	 2,	/* link status */
+                        icsr_bm8:	 1,	/* Bit mode 8 */
+                        icsr_llp_en:	 1,	/* LLP enable bit */
+                 	icsr_rsvd2:	 1,     /* reserver */
+                        icsr_wrm_reset:	 1,	/* Warm reset bit */
+    			icsr_rsvd1:	 2,	/* Data ready offset */
+                        icsr_null_to:	 6;	/* Null timeout   */
+
+        } icsr_fields_s;
+} hubii_ilcsr_t;
+
+
+typedef union hubii_iowa_u {
+	u64	iowa_reg_value;
+	struct {
+		u64 	iowa_rsvd: 	48,	/* unused */
+                       	iowa_wxoac:	 8,	/* xtalk widget access bits */
+                   	iowa_rsvd1:	 7,	/* xtalk widget access bits */
+                  	iowa_w0oac:	 1;	/* xtalk widget access bits */
+        } iowa_fields_s;
+} hubii_iowa_t;
+
+typedef union hubii_iiwa_u {
+	u64	iiwa_reg_value;
+	struct {
+		u64 	iiwa_rsvd: 	48,	/* unused */
+			iiwa_wxiac:	 8,	/* hub wid access bits */
+			iiwa_rsvd1:	 7,	/* reserved */
+			iiwa_w0iac:	 1;	/* hub wid0 access */
+        } iiwa_fields_s;
+} hubii_iiwa_t;
+
+typedef union	hubii_illr_u {
+	u64	illr_reg_value;
+	struct {
+		u64 	illr_rsvd: 	32,	/* unused */
+			illr_cb_cnt:	16,	/* checkbit error count */
+                   	illr_sn_cnt:	16;	/* sequence number count */
+        } illr_fields_s;
+} hubii_illr_t;
+
+/* The structures below are defined to extract and modify the ii
+performance registers */
+
+/* io_perf_sel allows the caller to specify what tests will be
+   performed */
+typedef union io_perf_sel {
+	u64 perf_sel_reg;
+	struct {
+		u64 	perf_rsvd  : 48,
+		        perf_icct  :  8,
+		        perf_ippr1 :  4,
+  		        perf_ippr0 :  4;
+	} perf_sel_bits;
+} io_perf_sel_t;
+
+/* io_perf_cnt is to extract the count from the hub registers. Due to
+   hardware problems there is only one counter, not two. */
+
+typedef union io_perf_cnt {
+	u64	perf_cnt;
+	struct {
+		u64	perf_rsvd1 : 32,
+  			        perf_rsvd2 : 12,
+  			        perf_cnt   : 20;
+	} perf_cnt_bits;
+} io_perf_cnt_t;
+
+#endif /* !__ASSEMBLY__ */
+
+
+#define LNK_STAT_WORKING	0x2
+
+#define IIO_LLP_CB_MAX	0xffff
+#define IIO_LLP_SN_MAX	0xffff
+
+/* IO PRB Entries */
+#define	IIO_NUM_IPRBS	(9)
+#define IIO_IOPRB_0	0x400198	/* PRB entry 0 */
+#define IIO_IOPRB_8	0x4001a0	/* PRB entry 8 */
+#define IIO_IOPRB_9	0x4001a8	/* PRB entry 9 */
+#define IIO_IOPRB_A	0x4001b0	/* PRB entry a */
+#define IIO_IOPRB_B	0x4001b8	/* PRB entry b */
+#define IIO_IOPRB_C	0x4001c0	/* PRB entry c */
+#define IIO_IOPRB_D	0x4001c8	/* PRB entry d */
+#define IIO_IOPRB_E	0x4001d0	/* PRB entry e */
+#define IIO_IOPRB_F	0x4001d8	/* PRB entry f */
+
+
+#define IIO_IXCC	0x4001e0	/* Crosstalk credit count timeout */
+#define IIO_IXTCC	IIO_IXCC
+#define IIO_IMEM	0x4001e8	/* Miscellaneous Enable Mask */
+#define IIO_IXTT	0x4001f0	/* Crosstalk tail timeout */
+#define IIO_IECLR	0x4001f8	/* IO error clear */
+#define IIO_IBCN        0x400200        /* IO BTE CRB count */
+
+/*
+ * IIO_IMEM Register fields.
+ */
+#define IIO_IMEM_W0ESD  0x1             /* Widget 0 shut down due to error */
+#define IIO_IMEM_B0ESD  (1 << 4)        /* BTE 0 shut down due to error */
+#define IIO_IMEM_B1ESD  (1 << 8)        /* BTE 1 Shut down due to error */
+
+/* PIO Read address Table Entries */
+#define IIO_IPCA	0x400300	/* PRB Counter adjust */
+#define IIO_NUM_PRTES	8		/* Total number of PRB table entries */
+#define IIO_PRTE_0	0x400308	/* PIO Read address table entry 0 */
+#define IIO_PRTE(_x)	(IIO_PRTE_0 + (8 * (_x)))
+#define	IIO_WIDPRTE(x)	IIO_PRTE(((x) - 8)) /* widget ID to its PRTE num */
+#define IIO_IPDR	0x400388	/* PIO table entry deallocation */
+#define IIO_ICDR	0x400390	/* CRB Entry Deallocation */
+#define IIO_IFDR	0x400398	/* IOQ FIFO Depth */
+#define IIO_IIAP	0x4003a0	/* IIQ Arbitration Parameters */
+#define IIO_IMMR	IIO_IIAP
+#define IIO_ICMR	0x4003a8	/* CRB Managment Register */
+#define IIO_ICCR	0x4003b0	/* CRB Control Register */
+#define IIO_ICTO	0x4003b8	/* CRB Time Out Register */
+#define IIO_ICTP	0x4003c0	/* CRB Time Out Prescalar */
+
+
+/*
+ * ICMR register fields
+ */
+#define IIO_ICMR_PC_VLD_SHFT	36
+#define IIO_ICMR_PC_VLD_MASK	(0x7fffUL << IIO_ICMR_PC_VLD_SHFT)
+
+#define IIO_ICMR_CRB_VLD_SHFT	20
+#define IIO_ICMR_CRB_VLD_MASK	(0x7fffUL << IIO_ICMR_CRB_VLD_SHFT)
+
+#define IIO_ICMR_FC_CNT_SHFT	16
+#define IIO_ICMR_FC_CNT_MASK	(0xf << IIO_ICMR_FC_CNT_SHFT)
+
+#define IIO_ICMR_C_CNT_SHFT	4
+#define IIO_ICMR_C_CNT_MASK	(0xf << IIO_ICMR_C_CNT_SHFT)
+
+#define IIO_ICMR_P_CNT_SHFT	0
+#define IIO_ICMR_P_CNT_MASK	(0xf << IIO_ICMR_P_CNT_SHFT)
+
+#define IIO_ICMR_PRECISE	(1UL << 52)
+#define IIO_ICMR_CLR_RPPD	(1UL << 13)
+#define IIO_ICMR_CLR_RQPD	(1UL << 12)
+
+/*
+ * IIO PIO Deallocation register field masks : (IIO_IPDR)
+ */
+#define	IIO_IPDR_PND	(1 << 4)
+
+/*
+ * IIO CRB deallocation register field masks: (IIO_ICDR)
+ */
+#define	IIO_ICDR_PND	(1 << 4)
+
+/*
+ * IIO CRB control register Fields: IIO_ICCR
+ */
+#define	IIO_ICCR_PENDING	(0x10000)
+#define	IIO_ICCR_CMD_MASK	(0xFF)
+#define	IIO_ICCR_CMD_SHFT	(7)
+#define	IIO_ICCR_CMD_NOP	(0x0)	/* No Op */
+#define	IIO_ICCR_CMD_WAKE	(0x100) /* Reactivate CRB entry and process */
+#define	IIO_ICCR_CMD_TIMEOUT	(0x200)	/* Make CRB timeout & mark invalid */
+#define	IIO_ICCR_CMD_EJECT	(0x400)	/* Contents of entry written to memory
+					 * via a WB
+					 */
+#define	IIO_ICCR_CMD_FLUSH	(0x800)
+
+/*
+ * CRB manipulation macros
+ *	The CRB macros are slightly complicated, since there are up to
+ * 	four registers associated with each CRB entry.
+ */
+#define IIO_NUM_CRBS		15	/* Number of CRBs */
+#define IIO_NUM_NORMAL_CRBS     12	/* Number of regular CRB entries */
+#define IIO_NUM_PC_CRBS 	4	/* Number of partial cache CRBs */
+#define IIO_ICRB_OFFSET		8
+#define IIO_ICRB_0		0x400400
+/* XXX - This is now tuneable:
+	#define IIO_FIRST_PC_ENTRY 12
+ */
+
+#define IIO_ICRB_A(_x)	(IIO_ICRB_0 + (4 * IIO_ICRB_OFFSET * (_x)))
+#define IIO_ICRB_B(_x)  (IIO_ICRB_A(_x) + 1*IIO_ICRB_OFFSET)
+#define IIO_ICRB_C(_x)	(IIO_ICRB_A(_x) + 2*IIO_ICRB_OFFSET)
+#define IIO_ICRB_D(_x)  (IIO_ICRB_A(_x) + 3*IIO_ICRB_OFFSET)
+
+/* XXX - IBUE register coming for Hub 2 */
+
+/*
+ *
+ * CRB Register description.
+ *
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ *
+ * Many of the fields in CRB are status bits used by hardware
+ * for implementation of the protocol. It's very dangerous to
+ * mess around with the CRB registers.
+ *
+ * It's OK to read the CRB registers and try to make sense out of the
+ * fields in CRB.
+ *
+ * Updating CRB requires all activities in Hub IIO to be quiesced.
+ * otherwise, a write to CRB could corrupt other CRB entries.
+ * CRBs are here only as a back door peek to hub IIO's status.
+ * Quiescing implies  no dmas no PIOs
+ * either directly from the cpu or from sn0net.
+ * this is not something that can be done easily. So, AVOID updating
+ * CRBs.
+ */
+
+/*
+ * Fields in CRB Register A
+ */
+#ifndef __ASSEMBLY__
+typedef union icrba_u {
+	u64	reg_value;
+	struct {
+		u64 	resvd: 	6,
+			stall_bte0: 1,	/* Stall BTE 0 */
+			stall_bte1: 1,	/* Stall BTE 1 */
+			error:	1,	/* CRB has an error	*/
+			ecode:	3,	/* Error Code 		*/
+			lnetuce: 1,	/* SN0net Uncorrectable error */
+			mark:	1,	/* CRB Has been marked 	*/
+			xerr:	1,	/* Error bit set in xtalk header */
+			sidn:	4,	/* SIDN field from xtalk	*/
+			tnum: 	5,	/* TNUM field in xtalk		*/
+			addr:	38,	/* Address of request	*/
+			valid:	1,	/* Valid status		*/
+			iow:	1;	/* IO Write operation	*/
+	} icrba_fields_s;
+} icrba_t;
+
+/* This is an alternate typedef for the HUB1 CRB A in order to allow
+   runtime selection of the format based on the REV_ID field of the
+   NI_STATUS_REV_ID register. */
+typedef union h1_icrba_u {
+	u64	reg_value;
+
+	struct {
+		u64 	resvd: 	6,
+			unused:	1,	/* Unused but RW!!	*/
+			error:	1,	/* CRB has an error	*/
+			ecode:	4,	/* Error Code 		*/
+			lnetuce: 1,	/* SN0net Uncorrectable error */
+			mark:	1,	/* CRB Has been marked 	*/
+			xerr:	1,	/* Error bit set in xtalk header */
+			sidn:	4,	/* SIDN field from xtalk	*/
+			tnum: 	5,	/* TNUM field in xtalk		*/
+			addr:	38,	/* Address of request	*/
+			valid:	1,	/* Valid status		*/
+			iow:	1;	/* IO Write operation	*/
+	} h1_icrba_fields_s;
+} h1_icrba_t;
+
+/* XXX - Is this still right?  Check the spec. */
+#define ICRBN_A_CERR_SHFT	54
+#define ICRBN_A_ERR_MASK	0x3ff
+
+#if 0	/* Disabled, this causes namespace polution and break allmodconfig */
+/*
+ * Easy access macros.
+ */
+#define	a_error		icrba_fields_s.error
+#define	a_ecode		icrba_fields_s.ecode
+#define	a_lnetuce	icrba_fields_s.lnetuce
+#define	a_mark		icrba_fields_s.mark
+#define	a_xerr		icrba_fields_s.xerr
+#define	a_sidn		icrba_fields_s.sidn
+#define	a_tnum		icrba_fields_s.tnum
+#define	a_addr		icrba_fields_s.addr
+#define	a_valid		icrba_fields_s.valid
+#define	a_iow		icrba_fields_s.iow
+#endif
+
+#endif /* !__ASSEMBLY__ */
+
+#define	IIO_ICRB_ADDR_SHFT	2	/* Shift to get proper address */
+
+/*
+ * values for "ecode" field
+ */
+#define	IIO_ICRB_ECODE_DERR	0	/* Directory error due to IIO access */
+#define	IIO_ICRB_ECODE_PERR	1	/* Poison error on IO access */
+#define	IIO_ICRB_ECODE_WERR	2	/* Write error by IIO access
+					 * e.g. WINV to a Read only line.
+					 */
+#define	IIO_ICRB_ECODE_AERR	3	/* Access error caused by IIO access */
+#define	IIO_ICRB_ECODE_PWERR	4	/* Error on partial write	*/
+#define	IIO_ICRB_ECODE_PRERR	5	/* Error on partial read	*/
+#define	IIO_ICRB_ECODE_TOUT	6	/* CRB timeout before deallocating */
+#define	IIO_ICRB_ECODE_XTERR	7	/* Incoming xtalk pkt had error bit */
+
+
+
+/*
+ * Fields in CRB Register B
+ */
+#ifndef __ASSEMBLY__
+typedef union icrbb_u {
+	u64	reg_value;
+	struct {
+	    u64	rsvd1:	5,
+		btenum:	1,	/* BTE to which entry belongs to */
+		cohtrans: 1,	/* Coherent transaction	*/
+		xtsize:	2,	/* Xtalk operation size
+				 * 0: Double Word
+				 * 1: 32 Bytes.
+				 * 2: 128 Bytes,
+				 * 3: Reserved.
+				 */
+		srcnode: 9,	/* Source Node ID		*/
+		srcinit: 2,	/* Source Initiator:
+				 * See below for field values.
+				 */
+		useold:	1,	/* Use OLD command for processing */
+		imsgtype: 2,	/* Incoming message type
+				 * see below for field values
+				 */
+		imsg: 	8,	/* Incoming message 	*/
+		initator: 3,	/* Initiator of original request
+				 * See below for field values.
+				 */
+		reqtype: 5,	/* Identifies type of request
+				 * See below for field values.
+				 */
+		rsvd2:	7,
+		ackcnt:	11,	/* Invalidate ack count	*/
+		resp:	1,	/* data response  given to processor */
+		ack: 	1,	/* indicates data ack received 	*/
+		hold:	1,	/* entry is gathering inval acks */
+		wb_pend:1,	/* waiting for writeback to complete */
+		intvn: 	1,	/* Intervention */
+		stall_ib: 1,	/* Stall Ibuf (from crosstalk) */
+		stall_intr: 1;	/* Stall internal interrupts */
+	} icrbb_field_s;
+} icrbb_t;
+
+/* This is an alternate typedef for the HUB1 CRB B in order to allow
+   runtime selection of the format based on the REV_ID field of the
+   NI_STATUS_REV_ID register. */
+typedef union h1_icrbb_u {
+	u64	reg_value;
+	struct {
+		u64	rsvd1:	5,
+			btenum:	1,	/* BTE to which entry belongs to */
+			cohtrans: 1,	/* Coherent transaction	*/
+			xtsize:	2,	/* Xtalk operation size
+					 * 0: Double Word
+					 * 1: 32 Bytes.
+					 * 2: 128 Bytes,
+					 * 3: Reserved.
+					 */
+			srcnode: 9,	/* Source Node ID		*/
+			srcinit: 2,	/* Source Initiator:
+					 * See below for field values.
+					 */
+			useold:	1,	/* Use OLD command for processing */
+			imsgtype: 2,	/* Incoming message type
+					 * see below for field values
+					 */
+			imsg: 	8,	/* Incoming message 	*/
+			initator: 3,	/* Initiator of original request
+					 * See below for field values.
+					 */
+			rsvd2: 	1,
+			pcache: 1,	/* entry belongs to partial cache */
+			reqtype: 5,	/* Identifies type of request
+					 * See below for field values.
+					 */
+			stl_ib:	1,	/* stall Ibus coming from xtalk	*/
+			stl_intr: 1,	/* Stall internal interrupts */
+			stl_bte0: 1,	/* Stall BTE 0 	*/
+			stl_bte1: 1,	/* Stall BTE 1	*/
+			intrvn:	1,	/* Req was target of intervention */
+			ackcnt:	11,	/* Invalidate ack count	*/
+			resp:	1,	/* data response  given to processor */
+			ack: 	1,	/* indicates data ack received 	*/
+			hold:	1,	/* entry is gathering inval acks */
+			wb_pend:1,	/* waiting for writeback to complete */
+			sleep: 	1,	/* xtalk req sleeping till IO-sync */
+			pnd_reply: 1,	/* replies not issed due to IOQ full */
+			pnd_req: 1;	/* reqs not issued due to IOQ full */
+	} h1_icrbb_field_s;
+} h1_icrbb_t;
+
+
+#define	b_imsgtype	icrbb_field_s.imsgtype
+#define	b_btenum	icrbb_field_s.btenum
+#define	b_cohtrans	icrbb_field_s.cohtrans
+#define	b_xtsize	icrbb_field_s.xtsize
+#define	b_srcnode	icrbb_field_s.srcnode
+#define	b_srcinit	icrbb_field_s.srcinit
+#define	b_imsgtype	icrbb_field_s.imsgtype
+#define	b_imsg		icrbb_field_s.imsg
+#define	b_initiator	icrbb_field_s.initiator
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * values for field xtsize
+ */
+#define	IIO_ICRB_XTSIZE_DW	0	/* Xtalk operation size is 8 bytes  */
+#define	IIO_ICRB_XTSIZE_32	1	/* Xtalk operation size is 32 bytes */
+#define	IIO_ICRB_XTSIZE_128	2	/* Xtalk operation size is 128 bytes */
+
+/*
+ * values for field srcinit
+ */
+#define	IIO_ICRB_PROC0		0	/* Source of request is Proc 0 */
+#define	IIO_ICRB_PROC1		1	/* Source of request is Proc 1 */
+#define	IIO_ICRB_GB_REQ		2	/* Source is Guranteed BW request */
+#define	IIO_ICRB_IO_REQ		3	/* Source is Normal IO request	*/
+
+/*
+ * Values for field imsgtype
+ */
+#define	IIO_ICRB_IMSGT_XTALK	0	/* Incoming Meessage from Xtalk	*/
+#define	IIO_ICRB_IMSGT_BTE	1	/* Incoming message from BTE 	*/
+#define	IIO_ICRB_IMSGT_SN0NET	2	/* Incoming message from SN0 net */
+#define	IIO_ICRB_IMSGT_CRB	3	/* Incoming message from CRB ???  */
+
+/*
+ * values for field initiator.
+ */
+#define	IIO_ICRB_INIT_XTALK	0	/* Message originated in xtalk	*/
+#define	IIO_ICRB_INIT_BTE0	0x1	/* Message originated in BTE 0	*/
+#define	IIO_ICRB_INIT_SN0NET	0x2	/* Message originated in SN0net */
+#define	IIO_ICRB_INIT_CRB	0x3	/* Message originated in CRB ? 	*/
+#define	IIO_ICRB_INIT_BTE1	0x5	/* MEssage originated in BTE 1	*/
+
+/*
+ * Values for field reqtype.
+ */
+/* XXX - Need to fix this for Hub 2 */
+#define	IIO_ICRB_REQ_DWRD	0	/* Request type double word	*/
+#define	IIO_ICRB_REQ_QCLRD	1	/* Request is Qrtr Caceh line Rd */
+#define	IIO_ICRB_REQ_BLKRD	2	/* Request is block read	*/
+#define	IIO_ICRB_REQ_RSHU	6	/* Request is BTE block read	*/
+#define	IIO_ICRB_REQ_REXU	7	/* request is BTE Excl Read	*/
+#define	IIO_ICRB_REQ_RDEX	8	/* Request is Read Exclusive	*/
+#define	IIO_ICRB_REQ_WINC	9	/* Request is Write Invalidate 	*/
+#define	IIO_ICRB_REQ_BWINV	10	/* Request is BTE Winv		*/
+#define	IIO_ICRB_REQ_PIORD	11	/* Request is PIO read		*/
+#define	IIO_ICRB_REQ_PIOWR	12	/* Request is PIO Write 	*/
+#define	IIO_ICRB_REQ_PRDM	13	/* Request is Fetch&Op		*/
+#define	IIO_ICRB_REQ_PWRM	14	/* Request is Store &Op		*/
+#define	IIO_ICRB_REQ_PTPWR	15	/* Request is Peer to peer	*/
+#define	IIO_ICRB_REQ_WB		16	/* Request is Write back	*/
+#define	IIO_ICRB_REQ_DEX	17	/* Retained DEX Cache line	*/
+
+/*
+ * Fields in CRB Register C
+ */
+
+#ifndef __ASSEMBLY__
+
+typedef union icrbc_s {
+	u64	reg_value;
+	struct {
+		u64	rsvd:	6,
+			sleep:	1,
+			pricnt: 4,	/* Priority count sent with Read req */
+			pripsc: 4,	/* Priority Pre scalar 	*/
+			bteop:	1,	/* BTE Operation 	*/
+			push_be: 34,	/* Push address Byte enable
+					 * Holds push addr, if CRB is for BTE
+					 * If CRB belongs to Partial cache,
+					 * this contains byte enables bits
+					 * ([47:46] = 0)
+					 */
+			suppl:	11,	/* Supplemental field	*/
+			barrop: 1,	/* Barrier Op bit set in xtalk req */
+			doresp: 1,	/* Xtalk req needs a response 	*/
+			gbr:	1;	/* GBR bit set in xtalk packet 	*/
+	} icrbc_field_s;
+} icrbc_t;
+
+#define	c_pricnt	icrbc_field_s.pricnt
+#define	c_pripsc	icrbc_field_s.pripsc
+#define	c_bteop		icrbc_field_s.bteop
+#define	c_bteaddr	icrbc_field_s.push_be	/* push_be field has 2 names */
+#define c_benable 	icrbc_field_s.push_be	/* push_be field has 2 names */
+#define	c_suppl		icrbc_field_s.suppl
+#define	c_barrop	icrbc_field_s.barrop
+#define	c_doresp	icrbc_field_s.doresp
+#define	c_gbr	icrbc_field_s.gbr
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Fields in CRB Register D
+ */
+
+#ifndef __ASSEMBLY__
+typedef union icrbd_s {
+	u64	reg_value;
+	struct {
+	    u64	rsvd:	38,
+		toutvld: 1,	/* Timeout in progress for this CRB */
+		ctxtvld: 1,	/* Context field below is valid	*/
+		rsvd2:	1,
+		context: 15, 	/* Bit vector:
+				 * Has a bit set for each CRB entry
+				 * which needs to be deallocated
+				 * before this CRB entry is processed.
+				 * Set only for barrier operations.
+				 */
+		timeout: 8;	/* Timeout Upper 8 bits	*/
+	} icrbd_field_s;
+} icrbd_t;
+
+#define	icrbd_toutvld	icrbd_field_s.toutvld
+#define	icrbd_ctxtvld	icrbd_field_s.ctxtvld
+#define	icrbd_context	icrbd_field_s.context
+
+
+typedef union hubii_ifdr_u {
+	u64	hi_ifdr_value;
+	struct {
+		u64	ifdr_rsvd:	49,
+	                ifdr_maxrp:	 7,
+	                ifdr_rsvd1:	 1,
+                      	ifdr_maxrq:	 7;
+	} hi_ifdr_fields;
+} hubii_ifdr_t;
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Hardware designed names for the BTE control registers.
+ */
+#define IIO_IBLS_0	0x410000	/* BTE length/status 0 */
+#define IIO_IBSA_0	0x410008	/* BTE source address 0 */
+#define IIO_IBDA_0	0x410010	/* BTE destination address 0 */
+#define IIO_IBCT_0	0x410018	/* BTE control/terminate 0 */
+#define IIO_IBNA_0	0x410020	/* BTE notification address 0 */
+#define IIO_IBNR_0	IIO_IBNA_0
+#define IIO_IBIA_0	0x410028	/* BTE interrupt address 0 */
+
+#define IIO_IBLS_1	0x420000	/* BTE length/status 1 */
+#define IIO_IBSA_1	0x420008	/* BTE source address 1 */
+#define IIO_IBDA_1	0x420010	/* BTE destination address 1 */
+#define IIO_IBCT_1	0x420018	/* BTE control/terminate 1 */
+#define IIO_IBNA_1	0x420020	/* BTE notification address 1 */
+#define IIO_IBNR_1	IIO_IBNA_1
+#define IIO_IBIA_1	0x420028	/* BTE interrupt address 1 */
+
+/*
+ * More miscellaneous registers
+ */
+#define IIO_IPCR	0x430000	/* Performance Control */
+#define IIO_IPPR	0x430008	/* Performance Profiling */
+
+/*
+ * IO Error Clear register bit field definitions
+ */
+#define IECLR_BTE1		(1 << 18)  /* clear bte error 1 ??? */
+#define IECLR_BTE0		(1 << 17)  /* clear bte error 0 ??? */
+#define IECLR_CRAZY		(1 << 16)  /* clear crazy bit in wstat reg */
+#define IECLR_PRB_F		(1 << 15)  /* clear err bit in PRB_F reg */
+#define IECLR_PRB_E		(1 << 14)  /* clear err bit in PRB_E reg */
+#define IECLR_PRB_D		(1 << 13)  /* clear err bit in PRB_D reg */
+#define IECLR_PRB_C		(1 << 12)  /* clear err bit in PRB_C reg */
+#define IECLR_PRB_B		(1 << 11)  /* clear err bit in PRB_B reg */
+#define IECLR_PRB_A		(1 << 10)  /* clear err bit in PRB_A reg */
+#define IECLR_PRB_9		(1 << 9)   /* clear err bit in PRB_9 reg */
+#define IECLR_PRB_8		(1 << 8)   /* clear err bit in PRB_8 reg */
+#define IECLR_PRB_0		(1 << 0)   /* clear err bit in PRB_0 reg */
+
+/*
+ * IO PIO Read Table Entry format
+ */
+
+#ifndef __ASSEMBLY__
+
+typedef union iprte_a {
+	u64	entry;
+	struct {
+	    u64	rsvd1     : 7,  /* Reserved field 		*/
+		valid     : 1,	/* Maps to a timeout entry	*/
+		rsvd2     : 1,
+		srcnode   : 9,	/* Node which did this PIO	*/
+		initiator : 2,	/* If T5A or T5B or IO 		*/
+		rsvd3     : 3,
+		addr      : 38,	/* Physical address of PIO	*/
+		rsvd4     : 3;
+	} iprte_fields;
+} iprte_a_t;
+
+#define	iprte_valid	iprte_fields.valid
+#define	iprte_timeout	iprte_fields.timeout
+#define	iprte_srcnode	iprte_fields.srcnode
+#define	iprte_init	iprte_fields.initiator
+#define	iprte_addr	iprte_fields.addr
+
+#endif /* !__ASSEMBLY__ */
+
+#define	IPRTE_ADDRSHFT	3
+
+/*
+ * Hub IIO PRB Register format.
+ */
+
+#ifndef __ASSEMBLY__
+/*
+ * Note: Fields bnakctr, anakctr, xtalkctrmode, ovflow fields are
+ * "Status" fields, and should only be used in case of clean up after errors.
+ */
+
+typedef union iprb_u {
+	u64	reg_value;
+	struct {
+	    u64	rsvd1:	15,
+		error:	1,	/* Widget rcvd wr resp pkt w/ error */
+		ovflow:	5,	/* Over flow count. perf measurement */
+		fire_and_forget: 1, /* Launch Write without response */
+		mode:	2,	/* Widget operation Mode	*/
+		rsvd2:	2,
+		bnakctr: 14,
+		rsvd3: 	2,
+		anakctr: 14,
+		xtalkctr: 8;
+	} iprb_fields_s;
+} iprb_t;
+
+#define iprb_regval	reg_value
+
+#define	iprb_error	iprb_fields_s.error
+#define	iprb_ovflow	iprb_fields_s.ovflow
+#define	iprb_ff		iprb_fields_s.fire_and_forget
+#define	iprb_mode	iprb_fields_s.mode
+#define	iprb_bnakctr	iprb_fields_s.bnakctr
+#define	iprb_anakctr	iprb_fields_s.anakctr
+#define	iprb_xtalkctr	iprb_fields_s.xtalkctr
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * values for mode field in iprb_t.
+ * For details of the meanings of NAK and Accept, refer the PIO flow
+ * document
+ */
+#define	IPRB_MODE_NORMAL	(0)
+#define	IPRB_MODE_COLLECT_A	(1)	/* PRB in collect A mode */
+#define	IPRB_MODE_SERVICE_A	(2)	/* NAK B and Accept A */
+#define	IPRB_MODE_SERVICE_B	(3)	/* NAK A and Accept B */
+
+/*
+ * IO CRB entry C_A to E_A : Partial (cache) CRBS
+ */
+#ifndef __ASSEMBLY__
+typedef union icrbp_a {
+	u64   ip_reg;	    /* the entire register value	*/
+	struct {
+	     u64 error:	1,  /*    63, error occurred		*/
+		ln_uce:	1,  /*    62: uncorrectable memory 	*/
+		ln_ae:	1,  /*    61: protection violation 	*/
+		ln_werr:1,  /*    60: write access error 	*/
+		ln_aerr:1,  /*    59: sn0net: Address error	*/
+		ln_perr:1,  /*    58: sn0net: poison error	*/
+		timeout:1,  /*    57: CRB timed out		*/
+		l_bdpkt:1,  /*    56: truncated pkt on sn0net	*/
+		c_bdpkt:1,  /*    55: truncated pkt on xtalk	*/
+		c_err:	1,  /*    54: incoming xtalk req, err set*/
+		rsvd1: 12,  /* 53-42: reserved			*/
+		valid:	1,  /*    41: Valid status		*/
+		sidn:	4,  /* 40-37: SIDN field of xtalk rqst	*/
+		tnum:	5,  /* 36-32: TNUM of xtalk request	*/
+		bo:	1,  /*    31: barrier op set in xtalk rqst*/
+		resprqd:1,  /*    30: xtalk rqst requires response*/
+		gbr:	1,  /*    29: gbr bit set in xtalk rqst	*/
+		size:	2,  /* 28-27: size of xtalk request	*/
+		excl:	4,  /* 26-23: exclusive bit(s)		*/
+		stall:	3,  /* 22-20: stall (xtalk, bte 0/1)	*/
+		intvn:	1,  /*    19: rqst target of intervention*/
+		resp:	1,  /*    18: Data response given to t5	*/
+		ack:	1,  /*    17: Data ack received.	*/
+		hold:	1,  /*    16: crb gathering invalidate acks*/
+		wb:	1,  /*    15: writeback pending.	*/
+		ack_cnt:11, /* 14-04: counter of invalidate acks*/
+		tscaler:4;  /* 03-00: Timeout prescaler		*/
+	} ip_fmt;
+} icrbp_a_t;
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * A couple of defines to go with the above structure.
+ */
+#define ICRBP_A_CERR_SHFT	54
+#define ICRBP_A_ERR_MASK	0x3ff
+
+#ifndef __ASSEMBLY__
+typedef union hubii_idsr {
+	u64 iin_reg;
+	struct {
+		u64 rsvd1 : 35,
+	            isent : 1,
+	            rsvd2 : 3,
+	            ienable: 1,
+	            rsvd  : 7,
+	            node  : 9,
+	            rsvd4 : 1,
+	            level : 7;
+	} iin_fmt;
+} hubii_idsr_t;
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * IO BTE Length/Status (IIO_IBLS) register bit field definitions
+ */
+#define IBLS_BUSY		(0x1 << 20)
+#define IBLS_ERROR_SHFT		16
+#define IBLS_ERROR		(0x1 << IBLS_ERROR_SHFT)
+#define IBLS_LENGTH_MASK	0xffff
+
+/*
+ * IO BTE Control/Terminate register (IBCT) register bit field definitions
+ */
+#define IBCT_POISON		(0x1 << 8)
+#define IBCT_NOTIFY		(0x1 << 4)
+#define IBCT_ZFIL_MODE		(0x1 << 0)
+
+/*
+ * IO BTE Interrupt Address Register (IBIA) register bit field definitions
+ */
+#define IBIA_LEVEL_SHFT		16
+#define IBIA_LEVEL_MASK		(0x7f << IBIA_LEVEL_SHFT)
+#define IBIA_NODE_ID_SHFT	0
+#define IBIA_NODE_ID_MASK	(0x1ff)
+
+/*
+ * Miscellaneous hub constants
+ */
+
+/* Number of widgets supported by hub */
+#define HUB_NUM_WIDGET		9
+#define HUB_WIDGET_ID_MIN	0x8
+#define HUB_WIDGET_ID_MAX	0xf
+
+#define HUB_WIDGET_PART_NUM	0xc101
+#define MAX_HUBS_PER_XBOW	2
+
+/*
+ * Get a hub's widget id from widget control register
+ */
+#define IIO_WCR_WID_GET(nasid)	(REMOTE_HUB_L(nasid, III_WCR) & 0xf)
+#define IIO_WST_ERROR_MASK	(UINT64_CAST 1 << 32) /* Widget status error */
+
+/*
+ * Number of credits Hub widget has while sending req/response to
+ * xbow.
+ * Value of 3 is required by Xbow 1.1
+ * We may be able to increase this to 4 with Xbow 1.2.
+ */
+#define       HUBII_XBOW_CREDIT       3
+#define	      HUBII_XBOW_REV2_CREDIT  4
+
+#endif /* _ASM_SGI_SN_SN0_HUBIO_H */