Merge remote-tracking branch 'android/android-3.0' into HEAD

Conflicts:
	drivers/net/wireless/bcmdhd/dhd_linux.c
	drivers/net/wireless/bcmdhd/wl_cfg80211.c
	drivers/net/wireless/bcmdhd/wl_cfg80211.h

2 files changed, 383 insertions, 6 deletions

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 27d2dd9..da5a98b 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -483,6 +483,43 @@
  *	more background information, see
  *	http://wireless.kernel.org/en/users/Documentation/WoWLAN.
  *
+ * @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver
+ *	the necessary information for supporting GTK rekey offload. This
+ *	feature is typically used during WoWLAN. The configuration data
+ *	is contained in %NL80211_ATTR_REKEY_DATA (which is nested and
+ *	contains the data in sub-attributes). After rekeying happened,
+ *	this command may also be sent by the driver as an MLME event to
+ *	inform userspace of the new replay counter.
+ *
+ * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace
+ *	of PMKSA caching dandidates.
+ *
+ * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup).
+ * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame.
+ *
+ * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP
+ *	(or GO) interface (i.e. hostapd) to ask for unexpected frames to
+ *	implement sending deauth to stations that send unexpected class 3
+ *	frames. Also used as the event sent by the kernel when such a frame
+ *	is received.
+ *	For the event, the %NL80211_ATTR_MAC attribute carries the TA and
+ *	other attributes like the interface index are present.
+ *	If used as the command it must have an interface index and you can
+ *	only unsubscribe from the event by closing the socket.
+ *
+ * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface
+ *	by sending a null data frame to it and reporting when the frame is
+ *	acknowleged. This is used to allow timing out inactive clients. Uses
+ *	%NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a
+ *	direct reply with an %NL80211_ATTR_COOKIE that is later used to match
+ *	up the event with the request. The event includes the same data and
+ *	has %NL80211_ATTR_ACK set if the frame was ACKed.
+ *
+ * @NL80211_CMD_REGISTER_BEACONS: Register this socket to receive beacons from
+ *	other BSSes when any interfaces are in AP mode. This helps implement
+ *	OLBC handling in hostapd. Beacons are reported in %NL80211_CMD_FRAME
+ *	messages. Note that per PHY only one application may register.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -605,6 +642,19 @@ enum nl80211_commands {
 	NL80211_CMD_SCHED_SCAN_RESULTS,
 	NL80211_CMD_SCHED_SCAN_STOPPED,
 
+	NL80211_CMD_SET_REKEY_OFFLOAD,
+
+	NL80211_CMD_PMKSA_CANDIDATE,
+
+	NL80211_CMD_TDLS_OPER,
+	NL80211_CMD_TDLS_MGMT,
+
+	NL80211_CMD_UNEXPECTED_FRAME,
+
+	NL80211_CMD_PROBE_CLIENT,
+
+	NL80211_CMD_REGISTER_BEACONS,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -984,8 +1034,8 @@ enum nl80211_commands {
  *	driving the peer link management state machine.
  *	@NL80211_MESH_SETUP_USERSPACE_AMPE must be enabled.
  *
- * @NL80211_ATTR_WOWLAN_SUPPORTED: indicates, as part of the wiphy capabilities,
- *	the supported WoWLAN triggers
+ * @NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED: indicates, as part of the wiphy
+ *	capabilities, the supported WoWLAN triggers
  * @NL80211_ATTR_WOWLAN_TRIGGERS: used by %NL80211_CMD_SET_WOWLAN to
  *	indicate which WoW triggers should be enabled. This is also
  *	used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN
@@ -1020,6 +1070,65 @@ enum nl80211_commands {
  *	are managed in software: interfaces of these types aren't subject to
  *	any restrictions in their number or combinations.
  *
+ * @%NL80211_ATTR_REKEY_DATA: nested attribute containing the information
+ *	necessary for GTK rekeying in the device, see &enum nl80211_rekey_data.
+ *
+ * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan,
+ *	nested array attribute containing an entry for each band, with the entry
+ *	being a list of supported rates as defined by IEEE 802.11 7.3.2.2 but
+ *	without the length restriction (at most %NL80211_MAX_SUPP_RATES).
+ *
+ * @NL80211_ATTR_HIDDEN_SSID: indicates whether SSID is to be hidden from Beacon
+ *	and Probe Response (when response to wildcard Probe Request); see
+ *	&enum nl80211_hidden_ssid, represented as a u32
+ *
+ * @NL80211_ATTR_IE_PROBE_RESP: Information element(s) for Probe Response frame.
+ *	This is used with %NL80211_CMD_NEW_BEACON and %NL80211_CMD_SET_BEACON to
+ *	provide extra IEs (e.g., WPS/P2P IE) into Probe Response frames when the
+ *	driver (or firmware) replies to Probe Request frames.
+ * @NL80211_ATTR_IE_ASSOC_RESP: Information element(s) for (Re)Association
+ *	Response frames. This is used with %NL80211_CMD_NEW_BEACON and
+ *	%NL80211_CMD_SET_BEACON to provide extra IEs (e.g., WPS/P2P IE) into
+ *	(Re)Association Response frames when the driver (or firmware) replies to
+ *	(Re)Association Request frames.
+ *
+ * @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration
+ *	of the station, see &enum nl80211_sta_wme_attr.
+ * @NL80211_ATTR_SUPPORT_AP_UAPSD: the device supports uapsd when working
+ *	as AP.
+ *
+ * @NL80211_ATTR_ROAM_SUPPORT: Indicates whether the firmware is capable of
+ *	roaming to another AP in the same ESS if the signal lever is low.
+ *
+ * @NL80211_ATTR_PMKSA_CANDIDATE: Nested attribute containing the PMKSA caching
+ *	candidate information, see &enum nl80211_pmksa_candidate_attr.
+ *
+ * @NL80211_ATTR_TX_NO_CCK_RATE: Indicates whether to use CCK rate or not
+ *	for management frames transmission. In order to avoid p2p probe/action
+ *	frames are being transmitted at CCK rate in 2GHz band, the user space
+ *	applications use this attribute.
+ *	This attribute is used with %NL80211_CMD_TRIGGER_SCAN and
+ *	%NL80211_CMD_FRAME commands.
+ *
+ * @NL80211_ATTR_TDLS_ACTION: Low level TDLS action code (e.g. link setup
+ *	request, link setup confirm, link teardown, etc.). Values are
+ *	described in the TDLS (802.11z) specification.
+ * @NL80211_ATTR_TDLS_DIALOG_TOKEN: Non-zero token for uniquely identifying a
+ *	TDLS conversation between two devices.
+ * @NL80211_ATTR_TDLS_OPERATION: High level TDLS operation; see
+ *	&enum nl80211_tdls_operation, represented as a u8.
+ * @NL80211_ATTR_TDLS_SUPPORT: A flag indicating the device can operate
+ *	as a TDLS peer sta.
+ * @NL80211_ATTR_TDLS_EXTERNAL_SETUP: The TDLS discovery/setup and teardown
+ *	procedures should be performed by sending TDLS packets via
+ *	%NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be
+ *	used for asking the driver to perform a TDLS operation.
+ *
+ * @NL80211_ATTR_DEVICE_AP_SME: This u32 attribute may be listed for devices
+ *	that have AP support to indicate that they have the AP SME integrated
+ *	with support for the features listed in this attribute, see
+ *	&enum nl80211_ap_sme_features.
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -1238,6 +1347,18 @@ enum nl80211_attrs {
 	NL80211_ATTR_SCHED_SCAN_MATCH,
 	NL80211_ATTR_MAX_MATCH_SETS,
 
+	NL80211_ATTR_PMKSA_CANDIDATE,
+
+	NL80211_ATTR_TX_NO_CCK_RATE,
+
+	NL80211_ATTR_TDLS_ACTION,
+	NL80211_ATTR_TDLS_DIALOG_TOKEN,
+	NL80211_ATTR_TDLS_OPERATION,
+	NL80211_ATTR_TDLS_SUPPORT,
+	NL80211_ATTR_TDLS_EXTERNAL_SETUP,
+
+	NL80211_ATTR_DEVICE_AP_SME,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -2303,6 +2424,16 @@ struct nl80211_wowlan_pattern_support {
  *
  *	In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute
  *	carrying a &struct nl80211_wowlan_pattern_support.
+ * @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be
+ *	used when setting, used only to indicate that GTK rekeying is supported
+ *	by the device (flag)
+ * @NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE: wake up on GTK rekey failure (if
+ *	done by the device) (flag)
+ * @NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST: wake up on EAP Identity Request
+ *	packet (flag)
+ * @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag)
+ * @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released
+ *	(on devices that have rfkill in the device) (flag)
  * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers
  * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
  */
@@ -2312,6 +2443,11 @@ enum nl80211_wowlan_triggers {
 	NL80211_WOWLAN_TRIG_DISCONNECT,
 	NL80211_WOWLAN_TRIG_MAGIC_PKT,
 	NL80211_WOWLAN_TRIG_PKT_PATTERN,
+	NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED,
+	NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE,
+	NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST,
+	NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE,
+	NL80211_WOWLAN_TRIG_RFKILL_RELEASE,
 
 	/* keep last */
 	NUM_NL80211_WOWLAN_TRIG,
@@ -2425,4 +2561,110 @@ enum nl80211_plink_state {
 	MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1
 };
 
+#define NL80211_KCK_LEN			16
+#define NL80211_KEK_LEN			16
+#define NL80211_REPLAY_CTR_LEN		8
+
+/**
+ * enum nl80211_rekey_data - attributes for GTK rekey offload
+ * @__NL80211_REKEY_DATA_INVALID: invalid number for nested attributes
+ * @NL80211_REKEY_DATA_KEK: key encryption key (binary)
+ * @NL80211_REKEY_DATA_KCK: key confirmation key (binary)
+ * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary)
+ * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal)
+ * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal)
+ */
+enum nl80211_rekey_data {
+	__NL80211_REKEY_DATA_INVALID,
+	NL80211_REKEY_DATA_KEK,
+	NL80211_REKEY_DATA_KCK,
+	NL80211_REKEY_DATA_REPLAY_CTR,
+
+	/* keep last */
+	NUM_NL80211_REKEY_DATA,
+	MAX_NL80211_REKEY_DATA = NUM_NL80211_REKEY_DATA - 1
+};
+
+/**
+ * enum nl80211_hidden_ssid - values for %NL80211_ATTR_HIDDEN_SSID
+ * @NL80211_HIDDEN_SSID_NOT_IN_USE: do not hide SSID (i.e., broadcast it in
+ *	Beacon frames)
+ * @NL80211_HIDDEN_SSID_ZERO_LEN: hide SSID by using zero-length SSID element
+ *	in Beacon frames
+ * @NL80211_HIDDEN_SSID_ZERO_CONTENTS: hide SSID by using correct length of SSID
+ *	element in Beacon frames but zero out each byte in the SSID
+ */
+enum nl80211_hidden_ssid {
+	NL80211_HIDDEN_SSID_NOT_IN_USE,
+	NL80211_HIDDEN_SSID_ZERO_LEN,
+	NL80211_HIDDEN_SSID_ZERO_CONTENTS
+};
+
+/**
+ * enum nl80211_sta_wme_attr - station WME attributes
+ * @__NL80211_STA_WME_INVALID: invalid number for nested attribute
+ * @NL80211_STA_WME_UAPSD_QUEUES: bitmap of uapsd queues. the format
+ *	is the same as the AC bitmap in the QoS info field.
+ * @NL80211_STA_WME_MAX_SP: max service period. the format is the same
+ *	as the MAX_SP field in the QoS info field (but already shifted down).
+ * @__NL80211_STA_WME_AFTER_LAST: internal
+ * @NL80211_STA_WME_MAX: highest station WME attribute
+ */
+enum nl80211_sta_wme_attr {
+	__NL80211_STA_WME_INVALID,
+	NL80211_STA_WME_UAPSD_QUEUES,
+	NL80211_STA_WME_MAX_SP,
+
+	/* keep last */
+	__NL80211_STA_WME_AFTER_LAST,
+	NL80211_STA_WME_MAX = __NL80211_STA_WME_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_pmksa_candidate_attr - attributes for PMKSA caching candidates
+ * @__NL80211_PMKSA_CANDIDATE_INVALID: invalid number for nested attributes
+ * @NL80211_PMKSA_CANDIDATE_INDEX: candidate index (u32; the smaller, the higher
+ *	priority)
+ * @NL80211_PMKSA_CANDIDATE_BSSID: candidate BSSID (6 octets)
+ * @NL80211_PMKSA_CANDIDATE_PREAUTH: RSN pre-authentication supported (flag)
+ * @NUM_NL80211_PMKSA_CANDIDATE: number of PMKSA caching candidate attributes
+ *	(internal)
+ * @MAX_NL80211_PMKSA_CANDIDATE: highest PMKSA caching candidate attribute
+ *	(internal)
+ */
+enum nl80211_pmksa_candidate_attr {
+	__NL80211_PMKSA_CANDIDATE_INVALID,
+	NL80211_PMKSA_CANDIDATE_INDEX,
+	NL80211_PMKSA_CANDIDATE_BSSID,
+	NL80211_PMKSA_CANDIDATE_PREAUTH,
+
+	/* keep last */
+	NUM_NL80211_PMKSA_CANDIDATE,
+	MAX_NL80211_PMKSA_CANDIDATE = NUM_NL80211_PMKSA_CANDIDATE - 1
+};
+
+/**
+ * enum nl80211_tdls_operation - values for %NL80211_ATTR_TDLS_OPERATION
+ * @NL80211_TDLS_DISCOVERY_REQ: Send a TDLS discovery request
+ * @NL80211_TDLS_SETUP: Setup TDLS link
+ * @NL80211_TDLS_TEARDOWN: Teardown a TDLS link which is already established
+ * @NL80211_TDLS_ENABLE_LINK: Enable TDLS link
+ * @NL80211_TDLS_DISABLE_LINK: Disable TDLS link
+ */
+enum nl80211_tdls_operation {
+	NL80211_TDLS_DISCOVERY_REQ,
+	NL80211_TDLS_SETUP,
+	NL80211_TDLS_TEARDOWN,
+	NL80211_TDLS_ENABLE_LINK,
+	NL80211_TDLS_DISABLE_LINK,
+};
+
+/*
+ * enum nl80211_ap_sme_features - device-integrated AP features
+ * Reserved for future use, no bits are defined in
+ * NL80211_ATTR_DEVICE_AP_SME yet.
+enum nl80211_ap_sme_features {
+};
+ */
+
 #endif /* __LINUX_NL80211_H */
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index a2a97f3..748de7b 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1177,14 +1177,32 @@ struct cfg80211_wowlan_trig_pkt_pattern {
  * @magic_pkt: wake up on receiving magic packet
  * @patterns: wake up on receiving packet matching a pattern
  * @n_patterns: number of patterns
+ * @gtk_rekey_failure: wake up on GTK rekey failure
+ * @eap_identity_req: wake up on EAP identity request packet
+ * @four_way_handshake: wake up on 4-way handshake
+ * @rfkill_release: wake up when rfkill is released
  */
 struct cfg80211_wowlan {
-	bool any, disconnect, magic_pkt;
+	bool any, disconnect, magic_pkt, gtk_rekey_failure,
+	     eap_identity_req, four_way_handshake,
+	     rfkill_release;
 	struct cfg80211_wowlan_trig_pkt_pattern *patterns;
 	int n_patterns;
 };
 
 /**
+ * struct cfg80211_gtk_rekey_data - rekey data
+ * @kek: key encryption key
+ * @kck: key confirmation key
+ * @replay_ctr: replay counter
+ */
+struct cfg80211_gtk_rekey_data {
+	u8 kek[NL80211_KEK_LEN];
+	u8 kck[NL80211_KCK_LEN];
+	u8 replay_ctr[NL80211_REPLAY_CTR_LEN];
+};
+
+/**
  * struct cfg80211_ops - backend description for wireless configuration
  *
  * This struct is registered by fullmac card drivers and/or wireless stacks
@@ -1228,6 +1246,8 @@ struct cfg80211_wowlan {
  *
  * @set_default_mgmt_key: set the default management frame key on an interface
  *
+ * @set_rekey_data: give the data necessary for GTK rekeying to the driver
+ *
  * @add_beacon: Add a beacon with given parameters, @head, @interval
  *	and @dtim_period will be valid, @tail is optional.
  * @set_beacon: Change the beacon parameters for an access point mode
@@ -1345,6 +1365,12 @@ struct cfg80211_wowlan {
  * @set_ringparam: Set tx and rx ring sizes.
  *
  * @get_ringparam: Get tx and rx ring current and maximum sizes.
+ *
+ * @tdls_mgmt: Transmit a TDLS management frame.
+ * @tdls_oper: Perform a high-level TDLS operation (e.g. TDLS link setup).
+ *
+ * @probe_client: probe an associated client, must return a cookie that it
+ *	later passes to cfg80211_probe_status().
  */
 struct cfg80211_ops {
 	int	(*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
@@ -1521,6 +1547,18 @@ struct cfg80211_ops {
 				struct net_device *dev,
 				struct cfg80211_sched_scan_request *request);
 	int	(*sched_scan_stop)(struct wiphy *wiphy, struct net_device *dev);
+
+	int	(*set_rekey_data)(struct wiphy *wiphy, struct net_device *dev,
+				  struct cfg80211_gtk_rekey_data *data);
+
+	int	(*tdls_mgmt)(struct wiphy *wiphy, struct net_device *dev,
+			     u8 *peer, u8 action_code,  u8 dialog_token,
+			     u16 status_code, const u8 *buf, size_t len);
+	int	(*tdls_oper)(struct wiphy *wiphy, struct net_device *dev,
+			     u8 *peer, enum nl80211_tdls_operation oper);
+
+	int	(*probe_client)(struct wiphy *wiphy, struct net_device *dev,
+				const u8 *peer, u64 *cookie);
 };
 
 /*
@@ -1570,6 +1608,19 @@ struct cfg80211_ops {
  * @WIPHY_FLAG_MESH_AUTH: The device supports mesh authentication by routing
  *	auth frames to userspace. See @NL80211_MESH_SETUP_USERSPACE_AUTH.
  * @WIPHY_FLAG_SUPPORTS_SCHED_SCAN: The device supports scheduled scans.
+ * @WIPHY_FLAG_SUPPORTS_FW_ROAM: The device supports roaming feature in the
+ *	firmware.
+ * @WIPHY_FLAG_AP_UAPSD: The device supports uapsd on AP.
+ * @WIPHY_FLAG_SUPPORTS_TDLS: The device supports TDLS (802.11z) operation.
+ * @WIPHY_FLAG_TDLS_EXTERNAL_SETUP: The device does not handle TDLS (802.11z)
+ *	link setup/discovery operations internally. Setup, discovery and
+ *	teardown packets should be sent through the @NL80211_CMD_TDLS_MGMT
+ *	command. When this flag is not set, @NL80211_CMD_TDLS_OPER should be
+ *	used for asking the driver/firmware to perform a TDLS operation.
+ * @WIPHY_FLAG_HAVE_AP_SME: device integrates AP SME
+ * @WIPHY_FLAG_REPORTS_OBSS: the device will report beacons from other BSSes
+ *	when there are virtual interfaces in AP mode by calling
+ *	cfg80211_report_obss_beacon().
  */
 enum wiphy_flags {
 	WIPHY_FLAG_CUSTOM_REGULATORY		= BIT(0),
@@ -1584,6 +1635,12 @@ enum wiphy_flags {
 	WIPHY_FLAG_MESH_AUTH			= BIT(10),
 	WIPHY_FLAG_SUPPORTS_SCHED_SCAN		= BIT(11),
 	WIPHY_FLAG_ENFORCE_COMBINATIONS		= BIT(12),
+	WIPHY_FLAG_SUPPORTS_FW_ROAM		= BIT(13),
+	WIPHY_FLAG_AP_UAPSD			= BIT(14),
+	WIPHY_FLAG_SUPPORTS_TDLS		= BIT(15),
+	WIPHY_FLAG_TDLS_EXTERNAL_SETUP		= BIT(16),
+	WIPHY_FLAG_HAVE_AP_SME			= BIT(17),
+	WIPHY_FLAG_REPORTS_OBSS			= BIT(18),
 };
 
 /**
@@ -1678,11 +1735,21 @@ struct ieee80211_txrx_stypes {
  * @WIPHY_WOWLAN_MAGIC_PKT: supports wakeup on magic packet
  *	(see nl80211.h)
  * @WIPHY_WOWLAN_DISCONNECT: supports wakeup on disconnect
+ * @WIPHY_WOWLAN_SUPPORTS_GTK_REKEY: supports GTK rekeying while asleep
+ * @WIPHY_WOWLAN_GTK_REKEY_FAILURE: supports wakeup on GTK rekey failure
+ * @WIPHY_WOWLAN_EAP_IDENTITY_REQ: supports wakeup on EAP identity request
+ * @WIPHY_WOWLAN_4WAY_HANDSHAKE: supports wakeup on 4-way handshake failure
+ * @WIPHY_WOWLAN_RFKILL_RELEASE: supports wakeup on RF-kill release
  */
 enum wiphy_wowlan_support_flags {
-	WIPHY_WOWLAN_ANY	= BIT(0),
-	WIPHY_WOWLAN_MAGIC_PKT	= BIT(1),
-	WIPHY_WOWLAN_DISCONNECT	= BIT(2),
+	WIPHY_WOWLAN_ANY		= BIT(0),
+	WIPHY_WOWLAN_MAGIC_PKT		= BIT(1),
+	WIPHY_WOWLAN_DISCONNECT		= BIT(2),
+	WIPHY_WOWLAN_SUPPORTS_GTK_REKEY	= BIT(3),
+	WIPHY_WOWLAN_GTK_REKEY_FAILURE	= BIT(4),
+	WIPHY_WOWLAN_EAP_IDENTITY_REQ	= BIT(5),
+	WIPHY_WOWLAN_4WAY_HANDSHAKE	= BIT(6),
+	WIPHY_WOWLAN_RFKILL_RELEASE	= BIT(7),
 };
 
 /**
@@ -1781,6 +1848,8 @@ struct wiphy_wowlan_support {
  *	may request, if implemented.
  *
  * @wowlan: WoWLAN support information
+ *
+ * @ap_sme_capa: AP SME capabilities, flags from &enum nl80211_ap_sme_features.
  */
 struct wiphy {
 	/* assign these fields before you register the wiphy */
@@ -1804,6 +1873,8 @@ struct wiphy {
 
 	u32 flags;
 
+	u32 ap_sme_capa;
+
 	enum cfg80211_signal_type signal_type;
 
 	int bss_priv_size;
@@ -2054,6 +2125,8 @@ struct wireless_dev {
 
 	int beacon_interval;
 
+	u32 ap_unexpected_nlpid;
+
 #ifdef CONFIG_CFG80211_WEXT
 	/* wext data */
 	struct {
@@ -3063,6 +3136,68 @@ void cfg80211_cqm_rssi_notify(struct net_device *dev,
 void cfg80211_cqm_pktloss_notify(struct net_device *dev,
 				 const u8 *peer, u32 num_packets, gfp_t gfp);
 
+/**
+ * cfg80211_gtk_rekey_notify - notify userspace about driver rekeying
+ * @dev: network device
+ * @bssid: BSSID of AP (to avoid races)
+ * @replay_ctr: new replay counter
+ */
+void cfg80211_gtk_rekey_notify(struct net_device *dev, const u8 *bssid,
+			       const u8 *replay_ctr, gfp_t gfp);
+
+/**
+ * cfg80211_pmksa_candidate_notify - notify about PMKSA caching candidate
+ * @dev: network device
+ * @index: candidate index (the smaller the index, the higher the priority)
+ * @bssid: BSSID of AP
+ * @preauth: Whether AP advertises support for RSN pre-authentication
+ * @gfp: allocation flags
+ */
+void cfg80211_pmksa_candidate_notify(struct net_device *dev, int index,
+				     const u8 *bssid, bool preauth, gfp_t gfp);
+
+/**
+ * cfg80211_rx_spurious_frame - inform userspace about a spurious frame
+ * @dev: The device the frame matched to
+ * @addr: the transmitter address
+ * @gfp: context flags
+ *
+ * This function is used in AP mode (only!) to inform userspace that
+ * a spurious class 3 frame was received, to be able to deauth the
+ * sender.
+ * Returns %true if the frame was passed to userspace (or this failed
+ * for a reason other than not having a subscription.)
+ */
+bool cfg80211_rx_spurious_frame(struct net_device *dev,
+				const u8 *addr, gfp_t gfp);
+
+/**
+ * cfg80211_probe_status - notify userspace about probe status
+ * @dev: the device the probe was sent on
+ * @addr: the address of the peer
+ * @cookie: the cookie filled in @probe_client previously
+ * @acked: indicates whether probe was acked or not
+ * @gfp: allocation flags
+ */
+void cfg80211_probe_status(struct net_device *dev, const u8 *addr,
+			   u64 cookie, bool acked, gfp_t gfp);
+
+/**
+ * cfg80211_report_obss_beacon - report beacon from other APs
+ * @wiphy: The wiphy that received the beacon
+ * @frame: the frame
+ * @len: length of the frame
+ * @freq: frequency the frame was received on
+ * @gfp: allocation flags
+ *
+ * Use this function to report to userspace when a beacon was
+ * received. It is not useful to call this when there is no
+ * netdev that is in AP/GO mode.
+ */
+void cfg80211_report_obss_beacon(struct wiphy *wiphy,
+				 const u8 *frame, size_t len,
+				 int freq, gfp_t gfp);
+
 /* Logging, debugging and troubleshooting/diagnostic helpers. */
 
 /* wiphy_printk helpers, similar to dev_printk */