[ALSA] snd-aoa: add snd-aoa

This large patch adds all of snd-aoa.
Consisting of many modules, it currently replaces snd-powermac
for all layout-id based machines and handles many more (for
example new powerbooks and powermacs with digital output that
previously couldn't be used at all).
It also has support for all layout-IDs that Apple has (judging
from their Info.plist file) but not all are tested.
The driver currently has 2 known regressions over snd-powermac:
 * it doesn't handle powermac 7,2 and 7,3
 * it doesn't have a DRC control on snapper-based machines
I will fix those during the 2.6.18 development cycle.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

1 files changed, 76 insertions, 0 deletions

diff --git a/sound/aoa/codecs/snd-aoa-codec-onyx.h b/sound/aoa/codecs/snd-aoa-codec-onyx.h
new file mode 100644
index 0000000..aeedda7
--- /dev/null
+++ b/sound/aoa/codecs/snd-aoa-codec-onyx.h
@@ -0,0 +1,76 @@
+/*
+ * Apple Onboard Audio driver for Onyx codec (header)
+ *
+ * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
+ *
+ * GPL v2, can be found in COPYING.
+ */
+#ifndef __SND_AOA_CODEC_ONYX_H
+#define __SND_AOA_CODEC_ONYX_H
+#include <stddef.h>
+#include <linux/i2c.h>
+#include <linux/i2c-dev.h>
+#include <asm/pmac_low_i2c.h>
+#include <asm/prom.h>
+
+/* PCM3052 register definitions */
+
+/* the attenuation registers take values from
+ * -1 (0dB) to -127 (-63.0 dB) or others (muted) */
+#define ONYX_REG_DAC_ATTEN_LEFT		65
+#define FIRSTREGISTER			ONYX_REG_DAC_ATTEN_LEFT
+#define ONYX_REG_DAC_ATTEN_RIGHT	66
+
+#define ONYX_REG_CONTROL		67
+#	define ONYX_MRST		(1<<7)
+#	define ONYX_SRST		(1<<6)
+#	define ONYX_ADPSV		(1<<5)
+#	define ONYX_DAPSV		(1<<4)
+#	define ONYX_SILICONVERSION	(1<<0)
+/* all others reserved */
+
+#define ONYX_REG_DAC_CONTROL		68
+#	define ONYX_OVR1		(1<<6)
+#	define ONYX_MUTE_RIGHT		(1<<1)
+#	define ONYX_MUTE_LEFT		(1<<0)
+
+#define ONYX_REG_DAC_DEEMPH		69
+#	define ONYX_DIGDEEMPH_SHIFT	5
+#	define ONYX_DIGDEEMPH_MASK	(3<<ONYX_DIGDEEMPH_SHIFT)
+#	define ONYX_DIGDEEMPH_CTRL	(1<<4)
+
+#define ONYX_REG_DAC_FILTER		70
+#	define ONYX_ROLLOFF_FAST	(1<<5)
+#	define ONYX_DAC_FILTER_ALWAYS	(1<<2)
+
+#define	ONYX_REG_DAC_OUTPHASE		71
+#	define ONYX_OUTPHASE_INVERTED	(1<<0)
+
+#define ONYX_REG_ADC_CONTROL		72
+#	define ONYX_ADC_INPUT_MIC	(1<<5)
+/* 8 + input gain in dB, valid range for input gain is -4 .. 20 dB */
+#	define ONYX_ADC_PGA_GAIN_MASK	0x1f
+
+#define ONYX_REG_ADC_HPF_BYPASS		75
+#	define ONYX_HPF_DISABLE		(1<<3)
+#	define ONYX_ADC_HPF_ALWAYS	(1<<2)
+
+#define ONYX_REG_DIG_INFO1		77
+#	define ONYX_MASK_DIN_TO_BPZ	(1<<7)
+/* bits 1-5 control channel bits 1-5 */
+#	define ONYX_DIGOUT_DISABLE	(1<<0)
+
+#define ONYX_REG_DIG_INFO2		78
+/* controls channel bits 8-15 */
+
+#define ONYX_REG_DIG_INFO3		79
+/* control channel bits 24-29, high 2 bits reserved */
+
+#define ONYX_REG_DIG_INFO4		80
+#	define ONYX_VALIDL		(1<<7)
+#	define ONYX_VALIDR		(1<<6)
+#	define ONYX_SPDIF_ENABLE	(1<<5)
+/* lower 4 bits control bits 32-35 of channel control and word length */
+#	define ONYX_WORDLEN_MASK	(0xF)
+
+#endif /* __SND_AOA_CODEC_ONYX_H */