diff options
137 files changed, 6847 insertions, 13625 deletions
diff --git a/Documentation/blackfin/00-INDEX b/Documentation/blackfin/00-INDEX index d6840a9..c34e124 100644 --- a/Documentation/blackfin/00-INDEX +++ b/Documentation/blackfin/00-INDEX @@ -1,9 +1,6 @@ 00-INDEX - This file -cache-lock.txt - - HOWTO for blackfin cache locking. - cachefeatures.txt - Supported cache features. diff --git a/Documentation/blackfin/Makefile b/Documentation/blackfin/Makefile new file mode 100644 index 0000000..773dbb1 --- /dev/null +++ b/Documentation/blackfin/Makefile @@ -0,0 +1,6 @@ +obj-m := gptimers-example.o + +all: modules + +modules clean: + $(MAKE) -C ../.. SUBDIRS=$(PWD) $@ diff --git a/Documentation/blackfin/cache-lock.txt b/Documentation/blackfin/cache-lock.txt deleted file mode 100644 index 88ba1e6..0000000 --- a/Documentation/blackfin/cache-lock.txt +++ /dev/null @@ -1,48 +0,0 @@ -/* - * File: Documentation/blackfin/cache-lock.txt - * Based on: - * Author: - * - * Created: - * Description: This file contains the simple DMA Implementation for Blackfin - * - * Rev: $Id: cache-lock.txt 2384 2006-11-01 04:12:43Z magicyang $ - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - */ - -How to lock your code in cache in uClinux/blackfin --------------------------------------------------- - -There are only a few steps required to lock your code into the cache. -Currently you can lock the code by Way. - -Below are the interface provided for locking the cache. - - -1. cache_grab_lock(int Ways); - -This function grab the lock for locking your code into the cache specified -by Ways. - - -2. cache_lock(int Ways); - -This function should be called after your critical code has been executed. -Once the critical code exits, the code is now loaded into the cache. This -function locks the code into the cache. - - -So, the example sequence will be: - - cache_grab_lock(WAY0_L); /* Grab the lock */ - - critical_code(); /* Execute the code of interest */ - - cache_lock(WAY0_L); /* Lock the cache */ - -Where WAY0_L signifies WAY0 locking. diff --git a/Documentation/blackfin/cachefeatures.txt b/Documentation/blackfin/cachefeatures.txt index 0fbec23..75de51f 100644 --- a/Documentation/blackfin/cachefeatures.txt +++ b/Documentation/blackfin/cachefeatures.txt @@ -41,16 +41,6 @@ icplb_flush(); dcplb_flush(); - - Locking the cache. - - cache_grab_lock(); - cache_lock(); - - Please refer linux-2.6.x/Documentation/blackfin/cache-lock.txt for how to - lock the cache. - - Locking the cache is optional feature. - - Miscellaneous cache functions. flush_cache_all(); diff --git a/Documentation/blackfin/gptimers-example.c b/Documentation/blackfin/gptimers-example.c new file mode 100644 index 0000000..b1bd634 --- /dev/null +++ b/Documentation/blackfin/gptimers-example.c @@ -0,0 +1,83 @@ +/* + * Simple gptimers example + * http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:drivers:gptimers + * + * Copyright 2007-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/interrupt.h> +#include <linux/module.h> + +#include <asm/gptimers.h> +#include <asm/portmux.h> + +/* ... random driver includes ... */ + +#define DRIVER_NAME "gptimer_example" + +struct gptimer_data { + uint32_t period, width; +}; +static struct gptimer_data data; + +/* ... random driver state ... */ + +static irqreturn_t gptimer_example_irq(int irq, void *dev_id) +{ + struct gptimer_data *data = dev_id; + + /* make sure it was our timer which caused the interrupt */ + if (!get_gptimer_intr(TIMER5_id)) + return IRQ_NONE; + + /* read the width/period values that were captured for the waveform */ + data->width = get_gptimer_pwidth(TIMER5_id); + data->period = get_gptimer_period(TIMER5_id); + + /* acknowledge the interrupt */ + clear_gptimer_intr(TIMER5_id); + + /* tell the upper layers we took care of things */ + return IRQ_HANDLED; +} + +/* ... random driver code ... */ + +static int __init gptimer_example_init(void) +{ + int ret; + + /* grab the peripheral pins */ + ret = peripheral_request(P_TMR5, DRIVER_NAME); + if (ret) { + printk(KERN_NOTICE DRIVER_NAME ": peripheral request failed\n"); + return ret; + } + + /* grab the IRQ for the timer */ + ret = request_irq(IRQ_TIMER5, gptimer_example_irq, IRQF_SHARED, DRIVER_NAME, &data); + if (ret) { + printk(KERN_NOTICE DRIVER_NAME ": IRQ request failed\n"); + peripheral_free(P_TMR5); + return ret; + } + + /* setup the timer and enable it */ + set_gptimer_config(TIMER5_id, WDTH_CAP | PULSE_HI | PERIOD_CNT | IRQ_ENA); + enable_gptimers(TIMER5bit); + + return 0; +} +module_init(gptimer_example_init); + +static void __exit gptimer_example_exit(void) +{ + disable_gptimers(TIMER5bit); + free_irq(IRQ_TIMER5, &data); + peripheral_free(P_TMR5); +} +module_exit(gptimer_example_exit); + +MODULE_LICENSE("BSD"); diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 2180433..53c1e1d 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -32,6 +32,9 @@ config BLACKFIN select HAVE_OPROFILE select ARCH_WANT_OPTIONAL_GPIOLIB +config GENERIC_CSUM + def_bool y + config GENERIC_BUG def_bool y depends on BUG @@ -177,7 +180,7 @@ config BF539 help BF539 Processor Support. -config BF542 +config BF542_std bool "BF542" help BF542 Processor Support. @@ -187,7 +190,7 @@ config BF542M help BF542 Processor Support. -config BF544 +config BF544_std bool "BF544" help BF544 Processor Support. @@ -197,7 +200,7 @@ config BF544M help BF544 Processor Support. -config BF547 +config BF547_std bool "BF547" help BF547 Processor Support. @@ -207,7 +210,7 @@ config BF547M help BF547 Processor Support. -config BF548 +config BF548_std bool "BF548" help BF548 Processor Support. @@ -217,7 +220,7 @@ config BF548M help BF548 Processor Support. -config BF549 +config BF549_std bool "BF549" help BF549 Processor Support. @@ -311,31 +314,11 @@ config BF_REV_NONE endchoice -config BF51x - bool - depends on (BF512 || BF514 || BF516 || BF518) - default y - -config BF52x - bool - depends on (BF522 || BF523 || BF524 || BF525 || BF526 || BF527) - default y - config BF53x bool depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537) default y -config BF54xM - bool - depends on (BF542M || BF544M || BF547M || BF548M || BF549M) - default y - -config BF54x - bool - depends on (BF542 || BF544 || BF547 || BF548 || BF549 || BF54xM) - default y - config MEM_GENERIC_BOARD bool depends on GENERIC_BOARD @@ -917,6 +900,12 @@ config DMA_UNCACHED_2M bool "Enable 2M DMA region" config DMA_UNCACHED_1M bool "Enable 1M DMA region" +config DMA_UNCACHED_512K + bool "Enable 512K DMA region" +config DMA_UNCACHED_256K + bool "Enable 256K DMA region" +config DMA_UNCACHED_128K + bool "Enable 128K DMA region" config DMA_UNCACHED_NONE bool "Disable DMA region" endchoice @@ -1278,6 +1267,8 @@ source "net/Kconfig" source "drivers/Kconfig" +source "drivers/firmware/Kconfig" + source "fs/Kconfig" source "arch/blackfin/Kconfig.debug" diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile index f063b77..d4c7177 100644 --- a/arch/blackfin/Makefile +++ b/arch/blackfin/Makefile @@ -16,6 +16,7 @@ GZFLAGS := -9 KBUILD_CFLAGS += $(call cc-option,-mno-fdpic) KBUILD_AFLAGS += $(call cc-option,-mno-fdpic) CFLAGS_MODULE += -mlong-calls +LDFLAGS_MODULE += -m elf32bfin KALLSYMS += --symbol-prefix=_ KBUILD_DEFCONFIG := BF537-STAMP_defconfig @@ -137,7 +138,7 @@ archclean: INSTALL_PATH ?= /tftpboot boot := arch/$(ARCH)/boot -BOOT_TARGETS = vmImage vmImage.bz2 vmImage.gz vmImage.lzma +BOOT_TARGETS = vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma PHONY += $(BOOT_TARGETS) install KBUILD_IMAGE := $(boot)/vmImage @@ -151,6 +152,7 @@ install: define archhelp echo '* vmImage - Alias to selected kernel format (vmImage.gz by default)' + echo ' vmImage.bin - Uncompressed Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.bin)' echo ' vmImage.bz2 - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.bz2)' echo '* vmImage.gz - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.gz)' echo ' vmImage.lzma - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.lzma)' diff --git a/arch/blackfin/boot/Makefile b/arch/blackfin/boot/Makefile index fd9ccc5..e9c48c6 100644 --- a/arch/blackfin/boot/Makefile +++ b/arch/blackfin/boot/Makefile @@ -8,7 +8,7 @@ MKIMAGE := $(srctree)/scripts/mkuboot.sh -targets := vmImage vmImage.bz2 vmImage.gz vmImage.lzma +targets := vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma quiet_cmd_uimage = UIMAGE $@ @@ -29,6 +29,9 @@ $(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE $(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE $(call if_changed,lzma) +$(obj)/vmImage.bin: $(obj)/vmlinux.bin + $(call if_changed,uimage,none) + $(obj)/vmImage.bz2: $(obj)/vmlinux.bin.bz2 $(call if_changed,uimage,bzip2) @@ -38,6 +41,7 @@ $(obj)/vmImage.gz: $(obj)/vmlinux.bin.gz $(obj)/vmImage.lzma: $(obj)/vmlinux.bin.lzma $(call if_changed,uimage,lzma) +suffix-y := bin suffix-$(CONFIG_KERNEL_GZIP) := gz suffix-$(CONFIG_KERNEL_BZIP2) := bz2 suffix-$(CONFIG_KERNEL_LZMA) := lzma diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig index 9905b26..e315594 100644 --- a/arch/blackfin/configs/BF518F-EZBRD_defconfig +++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig @@ -67,6 +67,7 @@ CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y @@ -316,6 +317,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 CONFIG_BFIN_GPTIMERS=m # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set @@ -438,17 +440,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set -CONFIG_NET_DSA=y -# CONFIG_NET_DSA_TAG_DSA is not set -# CONFIG_NET_DSA_TAG_EDSA is not set -# CONFIG_NET_DSA_TAG_TRAILER is not set -CONFIG_NET_DSA_TAG_STPID=y -# CONFIG_NET_DSA_MV88E6XXX is not set -# CONFIG_NET_DSA_MV88E6060 is not set -# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set -# CONFIG_NET_DSA_MV88E6131 is not set -# CONFIG_NET_DSA_MV88E6123_61_65 is not set -CONFIG_NET_DSA_KSZ8893M=y +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig index 9dc6820..075e0fd 100644 --- a/arch/blackfin/configs/BF526-EZBRD_defconfig +++ b/arch/blackfin/configs/BF526-EZBRD_defconfig @@ -67,6 +67,7 @@ CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y @@ -321,6 +322,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 CONFIG_BFIN_GPTIMERS=m # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig index 77e35d4..6d1a623 100644 --- a/arch/blackfin/configs/BF527-EZKIT_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT_defconfig @@ -67,6 +67,7 @@ CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y @@ -321,6 +322,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 CONFIG_BFIN_GPTIMERS=y # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig index 4c04480..50f9a23 100644 --- a/arch/blackfin/configs/BF533-EZKIT_defconfig +++ b/arch/blackfin/configs/BF533-EZKIT_defconfig @@ -67,6 +67,7 @@ CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y @@ -283,6 +284,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 CONFIG_BFIN_GPTIMERS=m # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig index c99bbcd..6c60c82 100644 --- a/arch/blackfin/configs/BF533-STAMP_defconfig +++ b/arch/blackfin/configs/BF533-STAMP_defconfig @@ -67,6 +67,7 @@ CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y @@ -283,6 +284,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 CONFIG_BFIN_GPTIMERS=m # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig index 092ffda..2908595 100644 --- a/arch/blackfin/configs/BF537-STAMP_defconfig +++ b/arch/blackfin/configs/BF537-STAMP_defconfig @@ -67,6 +67,7 @@ CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y @@ -290,6 +291,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 CONFIG_BFIN_GPTIMERS=m # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set @@ -704,10 +706,7 @@ CONFIG_CONFIG_INPUT_PCF8574=m # # Hardware I/O ports # -CONFIG_SERIO=y -CONFIG_SERIO_SERPORT=y -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig index fa698a8..09ea249 100644 --- a/arch/blackfin/configs/BF538-EZKIT_defconfig +++ b/arch/blackfin/configs/BF538-EZKIT_defconfig @@ -67,6 +67,7 @@ CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y @@ -301,6 +302,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 CONFIG_BFIN_GPTIMERS=m # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig index f773ad1..eb3e98b 100644 --- a/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -1,22 +1,29 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28.10 -# Thu May 21 05:50:01 2009 +# Linux kernel version: 2.6.31.5 +# Mon Nov 2 22:02:56 2009 # # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y +CONFIG_GENERIC_CSUM=y +CONFIG_GENERIC_BUG=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -26,22 +33,40 @@ CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -62,17 +87,28 @@ CONFIG_EPOLL=y # CONFIG_TIMERFD is not set # CONFIG_EVENTFD is not set # CONFIG_AIO is not set + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -80,11 +116,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +# CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -94,13 +127,12 @@ CONFIG_BLOCK=y CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y # CONFIG_IOSCHED_DEADLINE is not set -CONFIG_IOSCHED_CFQ=y +# CONFIG_IOSCHED_CFQ is not set CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -137,7 +169,7 @@ CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_BF544M is not set # CONFIG_BF547 is not set # CONFIG_BF547M is not set -CONFIG_BF548=y +CONFIG_BF548_std=y # CONFIG_BF548M is not set # CONFIG_BF549 is not set # CONFIG_BF549M is not set @@ -195,7 +227,7 @@ CONFIG_BFIN548_EZKIT=y # # BF548 Specific Configuration # -# CONFIG_DEB_DMA_URGENT is not set +CONFIG_DEB_DMA_URGENT=y # CONFIG_BF548_ATAPI_ALTERNATIVE_PORT is not set # @@ -352,10 +384,11 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 CONFIG_BFIN_GPTIMERS=m # CONFIG_DMA_UNCACHED_4M is not set CONFIG_DMA_UNCACHED_2M=y @@ -366,14 +399,13 @@ CONFIG_DMA_UNCACHED_2M=y # Cache Support # CONFIG_BFIN_ICACHE=y -# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +# CONFIG_BFIN_L2_ICACHEABLE is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_EXTMEM_DCACHEABLE=y -CONFIG_BFIN_EXTMEM_WRITEBACK=y -# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set -# CONFIG_BFIN_L2_ICACHEABLE is not set +# CONFIG_BFIN_EXTMEM_WRITEBACK is not set +CONFIG_BFIN_EXTMEM_WRITETHROUGH=y # CONFIG_BFIN_L2_DCACHEABLE is not set # @@ -382,7 +414,7 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_MPU is not set # -# Asynchonous Memory Configuration +# Asynchronous Memory Configuration # # @@ -441,11 +473,6 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -469,13 +496,11 @@ CONFIG_IP_PNP=y # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set -CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -493,7 +518,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -548,14 +576,10 @@ CONFIG_SIR_BFIN_DMA=y # CONFIG_MCS_FIR is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y +# CONFIG_WIRELESS is not set CONFIG_WIRELESS_EXT=y -CONFIG_WIRELESS_EXT_SYSFS=y -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +CONFIG_LIB80211=m +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -578,6 +602,7 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set @@ -653,7 +678,6 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set -# CONFIG_MTD_NAND_BFIN is not set CONFIG_MTD_NAND_IDS=y CONFIG_MTD_NAND_BF5XX=y CONFIG_MTD_NAND_BF5XX_HWECC=y @@ -665,6 +689,11 @@ CONFIG_MTD_NAND_BF5XX_HWECC=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -682,10 +711,20 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_AD525X_DPOT is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -709,10 +748,6 @@ CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -729,6 +764,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -744,13 +780,34 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_SMC91X is not set -CONFIG_SMSC911X=y # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +CONFIG_SMSC911X=y +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -759,6 +816,8 @@ CONFIG_SMSC911X=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -771,13 +830,16 @@ CONFIG_LIBERTAS=m # CONFIG_LIBERTAS_USB is not set CONFIG_LIBERTAS_SDIO=m CONFIG_POWEROF2_BLOCKSIZE_ONLY=y +# CONFIG_LIBERTAS_SPI is not set # CONFIG_LIBERTAS_DEBUG is not set # CONFIG_USB_ZD1201 is not set -# CONFIG_USB_NET_RNDIS_WLAN is not set -# CONFIG_IWLWIFI_LEDS is not set # CONFIG_HOSTAP is not set # +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -813,28 +875,31 @@ CONFIG_INPUT_EVBUG=m # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set # CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set +CONFIG_KEYBOARD_BFIN=y # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_GPIO is not set -CONFIG_KEYBOARD_BFIN=y +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_OPENCORES is not set -# CONFIG_KEYBOARD_ADP5588 is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set CONFIG_TOUCHSCREEN_AD7877=m # CONFIG_TOUCHSCREEN_AD7879_I2C is not set # CONFIG_TOUCHSCREEN_AD7879_SPI is not set # CONFIG_TOUCHSCREEN_AD7879 is not set -# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_EETI is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set # CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set @@ -844,6 +909,8 @@ CONFIG_TOUCHSCREEN_AD7877=m # CONFIG_TOUCHSCREEN_WM97XX is not set # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set CONFIG_INPUT_MISC=y # CONFIG_INPUT_ATI_REMOTE is not set # CONFIG_INPUT_ATI_REMOTE2 is not set @@ -852,7 +919,11 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_CM109 is not set # CONFIG_INPUT_UINPUT is not set -# CONFIG_CONFIG_INPUT_PCF8574 is not set +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set +# CONFIG_INPUT_BFIN_ROTARY is not set +# CONFIG_INPUT_AD714X is not set +# CONFIG_INPUT_ADXL34X is not set +# CONFIG_INPUT_PCF8574 is not set # # Hardware I/O ports @@ -863,16 +934,13 @@ CONFIG_INPUT_MISC=y # # Character devices # -# CONFIG_AD9960 is not set CONFIG_BFIN_DMA_INTERFACE=m # CONFIG_BFIN_PPI is not set # CONFIG_BFIN_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BFIN_SPI_ADC is not set CONFIG_BFIN_SPORT=m -# CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_BFIN_TWI_LCD is not set -CONFIG_SIMPLE_GPIO=m CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y @@ -890,6 +958,7 @@ CONFIG_BFIN_JTAG_COMM=m # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y CONFIG_SERIAL_BFIN_DMA=y @@ -903,6 +972,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set CONFIG_BFIN_OTP=y # CONFIG_BFIN_OTP_WRITE_ENABLE is not set @@ -951,14 +1021,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_SENSORS_AD5252 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -975,13 +1040,18 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_BFIN_LOCK is not set # CONFIG_SPI_BFIN_SPORT is not set # CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set @@ -997,6 +1067,7 @@ CONFIG_GPIO_SYSFS=y # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: @@ -1038,28 +1109,19 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_UCB1400_CORE is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1096,6 +1158,7 @@ CONFIG_FB_BF54X_LQ043=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -1132,6 +1195,7 @@ CONFIG_SOUND_OSS_CORE=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y +CONFIG_SND_JACK=y # CONFIG_SND_SEQUENCER is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y @@ -1142,6 +1206,11 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set @@ -1152,7 +1221,6 @@ CONFIG_SND_SPI=y # # ALSA Blackfin devices # -# CONFIG_SND_BLACKFIN_AD1836 is not set # CONFIG_SND_BFIN_AD73322 is not set CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set @@ -1160,15 +1228,17 @@ CONFIG_SND_USB=y CONFIG_SND_SOC=y CONFIG_SND_SOC_AC97_BUS=y # CONFIG_SND_BF5XX_I2S is not set +# CONFIG_SND_BF5XX_TDM is not set CONFIG_SND_BF5XX_AC97=y CONFIG_SND_BF5XX_MMAP_SUPPORT=y # CONFIG_SND_BF5XX_MULTICHAN_SUPPORT is not set +CONFIG_SND_BF5XX_HAVE_COLD_RESET=y +CONFIG_SND_BF5XX_RESET_GPIO_NUM=19 +CONFIG_SND_BF5XX_SOC_AD1980=y CONFIG_SND_BF5XX_SOC_SPORT=y CONFIG_SND_BF5XX_SOC_AC97=y -CONFIG_SND_BF5XX_SOC_AD1980=y CONFIG_SND_BF5XX_SPORT_NUM=0 -CONFIG_SND_BF5XX_HAVE_COLD_RESET=y -CONFIG_SND_BF5XX_RESET_GPIO_NUM=19 +CONFIG_SND_SOC_I2C_AND_SPI=y # CONFIG_SND_SOC_ALL_CODECS is not set CONFIG_SND_SOC_AD1980=y # CONFIG_SOUND_PRIME is not set @@ -1188,30 +1258,34 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y -CONFIG_HID_BRIGHT=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -CONFIG_HID_DELL=y +# CONFIG_HID_DRAGONRISE is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -1237,6 +1311,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_ISP1362_HCD is not set @@ -1267,18 +1342,17 @@ CONFIG_USB_INVENTRA_DMA=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -1314,7 +1388,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1326,6 +1399,13 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +CONFIG_NOP_USB_XCEIV=y CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set @@ -1380,6 +1460,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1411,10 +1492,21 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_BFIN=y # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # +# Firmware Drivers +# +# CONFIG_FIRMWARE_MEMMAP is not set +# CONFIG_SIGMA is not set + +# # File systems # CONFIG_EXT2_FS=y @@ -1427,9 +1519,11 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1439,6 +1533,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m @@ -1467,10 +1566,7 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1489,17 +1585,8 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set -CONFIG_YAFFS_FS=m -CONFIG_YAFFS_YAFFS1=y -# CONFIG_YAFFS_9BYTE_TAGS is not set -# CONFIG_YAFFS_DOES_ECC is not set -CONFIG_YAFFS_YAFFS2=y -CONFIG_YAFFS_AUTO_YAFFS2=y -# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set -# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set -CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1508,6 +1595,7 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y @@ -1522,7 +1610,6 @@ CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1596,11 +1683,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_SECTION_MISMATCH=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1608,16 +1699,21 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_NOMMU_REGIONS is not set # CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_FRAME_POINTER is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set @@ -1625,17 +1721,16 @@ CONFIG_DEBUG_INFO=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set - -# -# Tracers -# -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_VERBOSE=y @@ -1657,17 +1752,15 @@ CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y +# CONFIG_BFIN_ISRAM_SELF_TEST is not set # # Security options # # CONFIG_KEYS is not set -CONFIG_SECURITY=y +# CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_NETWORK is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_SECURITY_ROOTPLUG is not set -CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 CONFIG_CRYPTO=y # @@ -1746,6 +1839,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1753,11 +1847,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1767,6 +1863,8 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/blackfin/configs/BF561-ACVILON_defconfig b/arch/blackfin/configs/BF561-ACVILON_defconfig new file mode 100644 index 0000000..b9b0f93 --- /dev/null +++ b/arch/blackfin/configs/BF561-ACVILON_defconfig @@ -0,0 +1,1643 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.31.4 +# Sat Oct 24 12:15:32 2009 +# +# CONFIG_MMU is not set +# CONFIG_FPU is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_BLACKFIN=y +CONFIG_GENERIC_CSUM=y +CONFIG_GENERIC_BUG=y +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_GENERIC_GPIO=y +CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +CONFIG_BASE_FULL=y +# CONFIG_FUTEX is not set +CONFIG_EPOLL=y +# CONFIG_SIGNALFD is not set +# CONFIG_TIMERFD is not set +# CONFIG_EVENTFD is not set +# CONFIG_AIO is not set + +# +# Performance Counters +# +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_MMAP_ALLOW_UNINITIALIZED is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set +# CONFIG_FREEZER is not set + +# +# Blackfin Processor Options +# + +# +# Processor and Board Settings +# +# CONFIG_BF512 is not set +# CONFIG_BF514 is not set +# CONFIG_BF516 is not set +# CONFIG_BF518 is not set +# CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set +# CONFIG_BF525 is not set +# CONFIG_BF526 is not set +# CONFIG_BF527 is not set +# CONFIG_BF531 is not set +# CONFIG_BF532 is not set +# CONFIG_BF533 is not set +# CONFIG_BF534 is not set +# CONFIG_BF536 is not set +# CONFIG_BF537 is not set +# CONFIG_BF538 is not set +# CONFIG_BF539 is not set +# CONFIG_BF542 is not set +# CONFIG_BF542M is not set +# CONFIG_BF544 is not set +# CONFIG_BF544M is not set +# CONFIG_BF547 is not set +# CONFIG_BF547M is not set +# CONFIG_BF548 is not set +# CONFIG_BF548M is not set +# CONFIG_BF549 is not set +# CONFIG_BF549M is not set +CONFIG_BF561=y +# CONFIG_SMP is not set +CONFIG_BF_REV_MIN=3 +CONFIG_BF_REV_MAX=5 +# CONFIG_BF_REV_0_0 is not set +# CONFIG_BF_REV_0_1 is not set +# CONFIG_BF_REV_0_2 is not set +# CONFIG_BF_REV_0_3 is not set +# CONFIG_BF_REV_0_4 is not set +CONFIG_BF_REV_0_5=y +# CONFIG_BF_REV_0_6 is not set +# CONFIG_BF_REV_ANY is not set +# CONFIG_BF_REV_NONE is not set +CONFIG_IRQ_PLL_WAKEUP=7 +CONFIG_IRQ_SPORT0_ERROR=7 +CONFIG_IRQ_SPORT1_ERROR=7 +CONFIG_IRQ_TIMER0=10 +CONFIG_IRQ_TIMER1=10 +CONFIG_IRQ_TIMER2=10 +CONFIG_IRQ_TIMER3=10 +CONFIG_IRQ_TIMER4=10 +CONFIG_IRQ_TIMER5=10 +CONFIG_IRQ_TIMER6=10 +CONFIG_IRQ_TIMER7=10 +CONFIG_IRQ_SPI_ERROR=7 +# CONFIG_BFIN561_EZKIT is not set +# CONFIG_BFIN561_TEPLA is not set +# CONFIG_BFIN561_BLUETECHNIX_CM is not set +CONFIG_BFIN561_ACVILON=y + +# +# BF561 Specific Configuration +# + +# +# Core B Support +# +# CONFIG_BF561_COREB is not set + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_IRQ_DMA1_ERROR=7 +CONFIG_IRQ_DMA2_ERROR=7 +CONFIG_IRQ_IMDMA_ERROR=7 +CONFIG_IRQ_PPI0_ERROR=7 +CONFIG_IRQ_PPI1_ERROR=7 +CONFIG_IRQ_UART_ERROR=7 +CONFIG_IRQ_RESERVED_ERROR=7 +CONFIG_IRQ_DMA1_0=8 +CONFIG_IRQ_DMA1_1=8 +CONFIG_IRQ_DMA1_2=8 +CONFIG_IRQ_DMA1_3=8 +CONFIG_IRQ_DMA1_4=8 +CONFIG_IRQ_DMA1_5=8 +CONFIG_IRQ_DMA1_6=8 +CONFIG_IRQ_DMA1_7=8 +CONFIG_IRQ_DMA1_8=8 +CONFIG_IRQ_DMA1_9=8 +CONFIG_IRQ_DMA1_10=8 +CONFIG_IRQ_DMA1_11=8 +CONFIG_IRQ_DMA2_0=9 +CONFIG_IRQ_DMA2_1=9 +CONFIG_IRQ_DMA2_2=9 +CONFIG_IRQ_DMA2_3=9 +CONFIG_IRQ_DMA2_4=9 +CONFIG_IRQ_DMA2_5=9 +CONFIG_IRQ_DMA2_6=9 +CONFIG_IRQ_DMA2_7=9 +CONFIG_IRQ_DMA2_8=9 +CONFIG_IRQ_DMA2_9=9 +CONFIG_IRQ_DMA2_10=9 +CONFIG_IRQ_DMA2_11=9 +CONFIG_IRQ_TIMER8=10 +CONFIG_IRQ_TIMER9=10 +CONFIG_IRQ_TIMER10=10 +CONFIG_IRQ_TIMER11=10 +CONFIG_IRQ_PROG0_INTA=11 +CONFIG_IRQ_PROG0_INTB=11 +CONFIG_IRQ_PROG1_INTA=11 +CONFIG_IRQ_PROG1_INTB=11 +CONFIG_IRQ_PROG2_INTA=11 +CONFIG_IRQ_PROG2_INTB=11 +CONFIG_IRQ_DMA1_WRRD0=8 +CONFIG_IRQ_DMA1_WRRD1=8 +CONFIG_IRQ_DMA2_WRRD0=9 +CONFIG_IRQ_DMA2_WRRD1=9 +CONFIG_IRQ_IMDMA_WRRD0=12 +CONFIG_IRQ_IMDMA_WRRD1=12 +CONFIG_IRQ_WDTIMER=13 + +# +# Board customizations +# +# CONFIG_CMDLINE_BOOL is not set +CONFIG_BOOT_LOAD=0x1000 + +# +# Clock/PLL Setup +# +CONFIG_CLKIN_HZ=12000000 +# CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_VCO_HZ=600000000 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133333333 +CONFIG_MIN_SCLK_HZ=27000000 + +# +# Kernel Timer/Scheduler +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SCHED_HRTICK=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_TICKSOURCE_GPTMR0 is not set +CONFIG_TICKSOURCE_CORETMR=y +CONFIG_CYCLES_CLOCKSOURCE=y +# CONFIG_GPTMR0_CLOCKSOURCE is not set +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + +# +# Misc +# +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set + +# +# Blackfin Kernel Optimizations +# + +# +# Memory Optimizations +# +CONFIG_I_ENTRY_L1=y +CONFIG_EXCPT_IRQ_SYSC_L1=y +CONFIG_DO_IRQ_L1=y +CONFIG_CORE_TIMER_IRQ_L1=y +CONFIG_IDLE_L1=y +CONFIG_SCHEDULE_L1=y +CONFIG_ARITHMETIC_OPS_L1=y +CONFIG_ACCESS_OK_L1=y +CONFIG_MEMSET_L1=y +CONFIG_MEMCPY_L1=y +CONFIG_SYS_BFIN_SPINLOCK_L1=y +# CONFIG_IP_CHECKSUM_L1 is not set +CONFIG_CACHELINE_ALIGNED_L1=y +# CONFIG_SYSCALL_TAB_L1 is not set +# CONFIG_CPLB_SWITCH_TAB_L1 is not set +CONFIG_APP_STACK_L1=y + +# +# Speed Optimizations +# +CONFIG_BFIN_INS_LOWOVERHEAD=y +CONFIG_RAMKERNEL=y +# CONFIG_ROMKERNEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_VIRT_TO_BUS=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 +CONFIG_BFIN_GPTIMERS=y +CONFIG_DMA_UNCACHED_4M=y +# CONFIG_DMA_UNCACHED_2M is not set +# CONFIG_DMA_UNCACHED_1M is not set +# CONFIG_DMA_UNCACHED_NONE is not set + +# +# Cache Support +# +CONFIG_BFIN_ICACHE=y +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +# CONFIG_BFIN_L2_ICACHEABLE is not set +CONFIG_BFIN_DCACHE=y +# CONFIG_BFIN_DCACHE_BANKA is not set +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set +# CONFIG_BFIN_L2_DCACHEABLE is not set + +# +# Memory Protection Unit +# +# CONFIG_MPU is not set + +# +# Asynchronous Memory Configuration +# + +# +# EBIU_AMGCTL Global Control +# +CONFIG_C_AMCKEN=y +CONFIG_C_CDPRIO=y +CONFIG_C_B0PEN=y +CONFIG_C_B1PEN=y +CONFIG_C_B2PEN=y +# CONFIG_C_B3PEN is not set +# CONFIG_C_AMBEN is not set +# CONFIG_C_AMBEN_B0 is not set +# CONFIG_C_AMBEN_B0_B1 is not set +# CONFIG_C_AMBEN_B0_B1_B2 is not set +CONFIG_C_AMBEN_ALL=y + +# +# EBIU_AMBCTL Control +# +CONFIG_BANK_0=0x99b2 +CONFIG_BANK_1=0x3350 +CONFIG_BANK_2=0x7BB0 +CONFIG_BANK_3=0xAAC2 + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF_FDPIC=y +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +# CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_UCLINUX is not set +CONFIG_MTD_PLATRAM=y + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +CONFIG_MTD_PHRAM=y +# CONFIG_MTD_MTDRAM is not set +CONFIG_MTD_BLOCK2MTD=y + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_VERIFY_WRITE=y +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +CONFIG_MTD_NAND_PLATFORM=y +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=2 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=y + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +CONFIG_SMSC911X=y +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_BFIN_DMA_INTERFACE is not set +# CONFIG_BFIN_PPI is not set +# CONFIG_BFIN_PPIFCD is not set +CONFIG_BFIN_SIMPLE_TIMER=y +# CONFIG_BFIN_SPI_ADC is not set +# CONFIG_BFIN_SPORT is not set +# CONFIG_BFIN_TWI_LCD is not set +# CONFIG_VT is not set +# CONFIG_DEVKMEM is not set +# CONFIG_BFIN_JTAG_COMM is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_BFIN=y +CONFIG_SERIAL_BFIN_CONSOLE=y +# CONFIG_SERIAL_BFIN_DMA is not set +CONFIG_SERIAL_BFIN_PIO=y +CONFIG_SERIAL_BFIN_UART0=y +# CONFIG_BFIN_UART0_CTSRTS is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_BFIN_SPORT is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# CAN, the car bus and industrial fieldbus +# +# CONFIG_CAN4LINUX is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOPCA=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +CONFIG_I2C_PCA_PLATFORM=y +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BFIN=y +# CONFIG_SPI_BFIN_LOCK is not set +# CONFIG_SPI_BFIN_SPORT is not set +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set + +# +# SPI Protocol Masters +# +CONFIG_SPI_SPIDEV=y +# CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +CONFIG_GPIO_PCF857X=y +# CONFIG_GPIO_ADP5588 is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +CONFIG_SENSORS_LM75=y +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_BFIN_WDT=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +# CONFIG_SND_DRIVERS is not set +CONFIG_SND_SPI=y + +# +# ALSA Blackfin devices +# +# CONFIG_SND_BFIN_AD73322 is not set +# CONFIG_SND_USB is not set +CONFIG_SND_SOC=y +CONFIG_SND_BF5XX_I2S=y +# CONFIG_SND_BF5XX_SOC_SSM2602 is not set +# CONFIG_SND_BF5XX_SOC_AD73311 is not set +# CONFIG_SND_BF5XX_SOC_ADAU1371 is not set +# CONFIG_SND_BF5XX_SOC_ADAU1761 is not set +# CONFIG_SND_BF5XX_TDM is not set +# CONFIG_SND_BF5XX_AC97 is not set +CONFIG_SND_BF5XX_SOC_SPORT=y +CONFIG_SND_BF5XX_SPORT_NUM=1 +CONFIG_SND_SOC_I2C_AND_SPI=y +# CONFIG_SND_SOC_ALL_CODECS is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +CONFIG_USB_SERIAL=y +# CONFIG_USB_SERIAL_CONSOLE is not set +# CONFIG_USB_EZUSB is not set +# CONFIG_USB_SERIAL_GENERIC is not set +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP210X is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +CONFIG_USB_SERIAL_FTDI_SIO=y +# CONFIG_USB_SERIAL_FUNSOFT is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IUU is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +CONFIG_USB_SERIAL_PL2303=y +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_QUALCOMM is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIEMENS_MPI is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_SYMBOL is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_OPTICON is not set +# CONFIG_USB_SERIAL_DEBUG is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +CONFIG_RTC_DRV_DS1307=y +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# Firmware Drivers +# +# CONFIG_FIRMWARE_MEMMAP is not set +# CONFIG_SIGMA is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=866 +CONFIG_FAT_DEFAULT_IOCHARSET="cp1251" +CONFIG_NTFS_FS=y +# CONFIG_NTFS_DEBUG is not set +# CONFIG_NTFS_RW is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=y +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +# CONFIG_JFFS2_ZLIB is not set +CONFIG_JFFS2_LZO=y +# CONFIG_JFFS2_RTIME is not set +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_JFFS2_CMODE_NONE is not set +# CONFIG_JFFS2_CMODE_PRIORITY is not set +# CONFIG_JFFS2_CMODE_SIZE is not set +CONFIG_JFFS2_CMODE_FAVOURLZO=y +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="cp1251" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +CONFIG_NLS_CODEPAGE_866=y +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +CONFIG_NLS_CODEPAGE_1251=y +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +CONFIG_NLS_KOI8_R=y +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_SECTION_MISMATCH=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_SHIRQ=y +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_NOMMU_REGIONS is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_FRAME_POINTER is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_VERBOSE=y +CONFIG_DEBUG_MMRS=y +# CONFIG_DEBUG_HWERR is not set +# CONFIG_DEBUG_DOUBLEFAULT is not set +CONFIG_DEBUG_HUNT_FOR_ZERO=y +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set +# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +# CONFIG_EARLY_PRINTK is not set +CONFIG_CPLB_INFO=y +CONFIG_ACCESS_CHECK=y +# CONFIG_BFIN_ISRAM_SELF_TEST is not set + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_PATH is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_SECURITY_ROOTPLUG is not set +# CONFIG_SECURITY_TOMOYO is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig index 0313cd1..e3ecdcc 100644 --- a/arch/blackfin/configs/BF561-EZKIT_defconfig +++ b/arch/blackfin/configs/BF561-EZKIT_defconfig @@ -1,22 +1,29 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28.10 -# Thu May 21 05:50:01 2009 +# Linux kernel version: 2.6.31.5 +# Mon Nov 2 21:59:31 2009 # # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y +CONFIG_GENERIC_CSUM=y +CONFIG_GENERIC_BUG=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -26,22 +33,40 @@ CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -62,17 +87,28 @@ CONFIG_EPOLL=y # CONFIG_TIMERFD is not set # CONFIG_EVENTFD is not set # CONFIG_AIO is not set + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -80,11 +116,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +# CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -94,13 +127,12 @@ CONFIG_BLOCK=y CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y # CONFIG_IOSCHED_DEADLINE is not set -CONFIG_IOSCHED_CFQ=y +# CONFIG_IOSCHED_CFQ is not set CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -170,6 +202,7 @@ CONFIG_IRQ_SPI_ERROR=7 CONFIG_BFIN561_EZKIT=y # CONFIG_BFIN561_TEPLA is not set # CONFIG_BFIN561_BLUETECHNIX_CM is not set +# CONFIG_BFIN561_ACVILON is not set # # BF561 Specific Configuration @@ -317,10 +350,11 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 CONFIG_BFIN_GPTIMERS=m # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set @@ -331,14 +365,13 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y -# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +# CONFIG_BFIN_L2_ICACHEABLE is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_EXTMEM_DCACHEABLE=y CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set -# CONFIG_BFIN_L2_ICACHEABLE is not set # CONFIG_BFIN_L2_DCACHEABLE is not set # @@ -347,7 +380,7 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_MPU is not set # -# Asynchonous Memory Configuration +# Asynchronous Memory Configuration # # @@ -407,11 +440,6 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -435,13 +463,11 @@ CONFIG_IP_PNP=y # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set -CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -459,7 +485,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -503,13 +532,8 @@ CONFIG_IRTTY_SIR=m # # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -530,6 +554,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set @@ -603,6 +628,11 @@ CONFIG_MTD_PHYSMAP=m # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -619,9 +649,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -645,9 +680,11 @@ CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_SMC91X=y -# CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -656,6 +693,8 @@ CONFIG_SMC91X=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -664,7 +703,10 @@ CONFIG_SMC91X=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -708,15 +750,12 @@ CONFIG_INPUT_EVDEV=m # # Character devices # -# CONFIG_AD9960 is not set CONFIG_BFIN_DMA_INTERFACE=m # CONFIG_BFIN_PPI is not set # CONFIG_BFIN_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BFIN_SPI_ADC is not set # CONFIG_BFIN_SPORT is not set -# CONFIG_BFIN_TIMER_LATENCY is not set -CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_DEVKMEM is not set CONFIG_BFIN_JTAG_COMM=m @@ -730,6 +769,7 @@ CONFIG_BFIN_JTAG_COMM=m # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y CONFIG_SERIAL_BFIN_DMA=y @@ -740,6 +780,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # @@ -763,13 +804,18 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_BFIN_LOCK is not set # CONFIG_SPI_BFIN_SPORT is not set # CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set @@ -782,9 +828,6 @@ CONFIG_GPIO_SYSFS=y # # I2C GPIO expanders: # -# CONFIG_GPIO_MAX732X is not set -# CONFIG_GPIO_PCA953X is not set -# CONFIG_GPIO_PCF857X is not set # # PCI GPIO expanders: @@ -822,23 +865,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -862,7 +891,6 @@ CONFIG_HID=m # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -870,10 +898,20 @@ CONFIG_HID_COMPAT=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # +# Firmware Drivers +# +# CONFIG_FIRMWARE_MEMMAP is not set + +# # File systems # # CONFIG_EXT2_FS is not set @@ -882,9 +920,11 @@ CONFIG_HID_COMPAT=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -894,6 +934,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -915,10 +960,7 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -937,17 +979,8 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set -CONFIG_YAFFS_FS=m -CONFIG_YAFFS_YAFFS1=y -# CONFIG_YAFFS_9BYTE_TAGS is not set -# CONFIG_YAFFS_DOES_ECC is not set -CONFIG_YAFFS_YAFFS2=y -CONFIG_YAFFS_AUTO_YAFFS2=y -# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set -# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set -CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -956,6 +989,7 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y @@ -966,7 +1000,6 @@ CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1034,11 +1067,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_SECTION_MISMATCH=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1046,16 +1083,21 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_NOMMU_REGIONS is not set # CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_FRAME_POINTER is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set @@ -1063,17 +1105,19 @@ CONFIG_DEBUG_INFO=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set - -# -# Tracers -# -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_BRANCH_PROFILE_NONE is not set +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_VERBOSE=y @@ -1095,16 +1139,15 @@ CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y +# CONFIG_BFIN_ISRAM_SELF_TEST is not set # # Security options # # CONFIG_KEYS is not set -CONFIG_SECURITY=y +# CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_NETWORK is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 CONFIG_CRYPTO=y # @@ -1183,6 +1226,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1190,11 +1234,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1204,6 +1250,8 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig index 5d944ff..9e65d88 100644 --- a/arch/blackfin/configs/BlackStamp_defconfig +++ b/arch/blackfin/configs/BlackStamp_defconfig @@ -66,6 +66,7 @@ CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y @@ -275,6 +276,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 CONFIG_BFIN_GPTIMERS=y # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig index 648a31d..4432150 100644 --- a/arch/blackfin/configs/CM-BF527_defconfig +++ b/arch/blackfin/configs/CM-BF527_defconfig @@ -1,12 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28 +# Linux kernel version: 2.6.30.5 # # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y +CONFIG_GENERIC_BUG=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y @@ -15,6 +16,9 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -25,55 +29,72 @@ CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +# CONFIG_KERNEL_GZIP is not set +# CONFIG_KERNEL_BZIP2 is not set +CONFIG_KERNEL_LZMA=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +# CONFIG_RD_GZIP is not set +# CONFIG_RD_BZIP2 is not set +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -# CONFIG_SYSCTL is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y # CONFIG_AIO is not set CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -81,11 +102,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -101,7 +119,6 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -265,7 +282,10 @@ CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_TICKSOURCE_GPTMR0 is not set +CONFIG_TICKSOURCE_CORETMR=y # CONFIG_CYCLES_CLOCKSOURCE is not set +# CONFIG_GPTMR0_CLOCKSOURCE is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -315,10 +335,12 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 CONFIG_BFIN_GPTIMERS=y # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set @@ -329,10 +351,9 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y -# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_EXTMEM_DCACHEABLE=y CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set @@ -343,7 +364,7 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_MPU is not set # -# Asynchonous Memory Configuration +# Asynchronous Memory Configuration # # @@ -361,7 +382,7 @@ CONFIG_C_AMBEN_ALL=y # EBIU_AMBCTL Control # CONFIG_BANK_0=0x7BB0 -CONFIG_BANK_1=0x5554 +CONFIG_BANK_1=0x7BB0 CONFIG_BANK_2=0x7BB0 CONFIG_BANK_3=0xFFC0 @@ -386,7 +407,6 @@ CONFIG_BINFMT_ZFLAT=y # # CONFIG_PM is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y -# CONFIG_PM_WAKEUP_BY_GPIO is not set # # CPU Frequency scaling @@ -400,11 +420,6 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -428,7 +443,6 @@ CONFIG_IP_PNP=y # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set -CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" @@ -452,7 +466,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -463,13 +479,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -484,22 +495,21 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers # -CONFIG_MTD_CHAR=m +CONFIG_MTD_CHAR=y CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set @@ -512,9 +522,9 @@ CONFIG_MTD_BLOCK=y # # RAM/ROM/Flash chip drivers # -# CONFIG_MTD_CFI is not set -CONFIG_MTD_JEDECPROBE=m -CONFIG_MTD_GEN_PROBE=m +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y # CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y @@ -526,9 +536,11 @@ CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_INTELEXT=y # CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set +# CONFIG_MTD_PSD4256G is not set +CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_RAM=y CONFIG_MTD_ROM=m # CONFIG_MTD_ABSENT is not set @@ -538,7 +550,7 @@ CONFIG_MTD_ROM=m # CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_GPIO_ADDR is not set +CONFIG_MTD_GPIO_ADDR=y # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -562,6 +574,11 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -586,12 +603,46 @@ CONFIG_HAVE_IDE=y # SCSI device support # # CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -613,6 +664,9 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -623,9 +677,11 @@ CONFIG_BFIN_TX_DESC_NUM=10 CONFIG_BFIN_RX_DESC_NUM=20 CONFIG_BFIN_MAC_RMII=y # CONFIG_SMC91X is not set -# CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -633,6 +689,7 @@ CONFIG_BFIN_MAC_RMII=y # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -641,7 +698,10 @@ CONFIG_BFIN_MAC_RMII=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # # USB Network Adapters @@ -674,17 +734,13 @@ CONFIG_BFIN_MAC_RMII=y # # Character devices # -# CONFIG_AD9960 is not set -# CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PPIFCD is not set +CONFIG_BFIN_DMA_INTERFACE=m +# CONFIG_BFIN_PPI is not set +# CONFIG_BFIN_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set -# CONFIG_BF5xx_PPI is not set -# CONFIG_BF5xx_EPPI is not set +# CONFIG_BFIN_SPI_ADC is not set # CONFIG_BFIN_SPORT is not set -# CONFIG_BFIN_TIMER_LATENCY is not set -# CONFIG_TWI_LCD is not set -CONFIG_BFIN_DMA_INTERFACE=m -CONFIG_SIMPLE_GPIO=m +# CONFIG_BFIN_TWI_LCD is not set # CONFIG_VT is not set # CONFIG_DEVKMEM is not set # CONFIG_BFIN_JTAG_COMM is not set @@ -698,6 +754,7 @@ CONFIG_SIMPLE_GPIO=m # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y CONFIG_SERIAL_BFIN_DMA=y @@ -710,6 +767,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set CONFIG_BFIN_OTP=y # CONFIG_BFIN_OTP_WRITE_ENABLE is not set @@ -758,13 +816,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_AD5252 is not set -# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -772,7 +826,6 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set CONFIG_SPI=y -# CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y # @@ -780,17 +833,17 @@ CONFIG_SPI_MASTER=y # CONFIG_SPI_BFIN=y # CONFIG_SPI_BFIN_LOCK is not set +# CONFIG_SPI_BFIN_SPORT is not set # CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y -# CONFIG_DEBUG_GPIO is not set CONFIG_GPIO_SYSFS=y # @@ -803,6 +856,7 @@ CONFIG_GPIO_SYSFS=y # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: @@ -829,11 +883,13 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -849,11 +905,16 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set @@ -885,6 +946,12 @@ CONFIG_BFIN_WDT=y # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set # # Multifunction device drivers @@ -892,10 +959,14 @@ CONFIG_BFIN_WDT=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set # @@ -931,20 +1002,20 @@ CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set -CONFIG_USB=y +CONFIG_USB=m # CONFIG_USB_DEBUG is not set -# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options # -# CONFIG_USB_DEVICEFS is not set -CONFIG_USB_DEVICE_CLASS=y +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set CONFIG_USB_OTG_BLACKLIST_HUB=y -CONFIG_USB_MON=y +CONFIG_USB_MON=m # CONFIG_USB_WUSB is not set # CONFIG_USB_WUSB_CBAF is not set @@ -952,24 +1023,24 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_HWA_HCD is not set -CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_HDRC=m CONFIG_USB_MUSB_SOC=y # # Blackfin high speed USB Support # -CONFIG_USB_MUSB_HOST=y -# CONFIG_USB_MUSB_PERIPHERAL is not set +# CONFIG_USB_MUSB_HOST is not set +CONFIG_USB_MUSB_PERIPHERAL=y # CONFIG_USB_MUSB_OTG is not set -CONFIG_USB_MUSB_HDRC_HCD=y +CONFIG_USB_GADGET_MUSB_HDRC=y CONFIG_MUSB_PIO_ONLY=y -CONFIG_MUSB_DMA_POLL=y # CONFIG_USB_MUSB_DEBUG is not set # @@ -981,18 +1052,31 @@ CONFIG_MUSB_DMA_POLL=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set # # USB port drivers @@ -1013,7 +1097,6 @@ CONFIG_MUSB_DMA_POLL=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1021,9 +1104,50 @@ CONFIG_MUSB_DMA_POLL=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set -# CONFIG_USB_GADGET is not set +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2272 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_USB_G_PRINTER=m +# CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1090,6 +1214,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_BFIN=y # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1102,9 +1227,10 @@ CONFIG_RTC_DRV_BFIN=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1114,6 +1240,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -1122,8 +1253,11 @@ CONFIG_INOTIFY_USER=y # # DOS/FAT/NT Filesystems # -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # @@ -1135,10 +1269,7 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1146,9 +1277,19 @@ CONFIG_SYSFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_YAFFS_FS is not set -# CONFIG_JFFS2_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1157,6 +1298,7 @@ CONFIG_SYSFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y @@ -1167,7 +1309,6 @@ CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1182,9 +1323,9 @@ CONFIG_SMB_FS=m # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -CONFIG_NLS=m +CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set +CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set @@ -1208,7 +1349,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set +CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set @@ -1235,55 +1376,34 @@ CONFIG_FRAME_WARN=1024 # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -# CONFIG_SCHED_DEBUG is not set -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_SECTION_MISMATCH=y +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_TRACING_SUPPORT=y # # Tracers # +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_KGDB is not set -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_KGDB_TESTCASE is not set CONFIG_DEBUG_VERBOSE=y -CONFIG_DEBUG_MMRS=y -# CONFIG_DEBUG_HWERR is not set +# CONFIG_DEBUG_MMRS is not set # CONFIG_DEBUG_DOUBLEFAULT is not set CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y @@ -1293,9 +1413,10 @@ CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set -# CONFIG_EARLY_PRINTK is not set +CONFIG_EARLY_PRINTK=y # CONFIG_CPLB_INFO is not set CONFIG_ACCESS_CHECK=y +# CONFIG_BFIN_ISRAM_SELF_TEST is not set # # Security options @@ -1304,9 +1425,9 @@ CONFIG_ACCESS_CHECK=y CONFIG_SECURITY=y # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_PATH is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_SECURITY_ROOTPLUG is not set -CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +# CONFIG_SECURITY_TOMOYO is not set CONFIG_CRYPTO=y # @@ -1385,6 +1506,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1392,20 +1514,24 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set -# CONFIG_CRC_ITU_T is not set +CONFIG_CRC_ITU_T=y CONFIG_CRC32=y -# CONFIG_CRC7 is not set +CONFIG_CRC7=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/blackfin/configs/CM-BF533_defconfig b/arch/blackfin/configs/CM-BF533_defconfig index ae665b9..df56639 100644 --- a/arch/blackfin/configs/CM-BF533_defconfig +++ b/arch/blackfin/configs/CM-BF533_defconfig @@ -1,94 +1,110 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.16 +# Linux kernel version: 2.6.30.5 # # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y +CONFIG_GENERIC_BUG=y CONFIG_ZONE_DMA=y -CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_TIME=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +# CONFIG_KERNEL_GZIP is not set +# CONFIG_KERNEL_BZIP2 is not set +CONFIG_KERNEL_LZMA=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -# CONFIG_SYSCTL is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_RD_GZIP is not set +# CONFIG_RD_BZIP2 is not set +CONFIG_RD_LZMA=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_UID16 is not set # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_HOTPLUG is not set +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 -# CONFIG_NP2 is not set +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set -CONFIG_RT_MUTEXES=y -CONFIG_TINY_SHMEM=y +CONFIG_MMAP_ALLOW_UNINITIALIZED=y +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODULE_FORCE_LOAD is not set +# CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -96,7 +112,7 @@ CONFIG_BLOCK=y CONFIG_IOSCHED_NOOP=y # CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set -CONFIG_IOSCHED_CFQ=y +# CONFIG_IOSCHED_CFQ is not set # CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set @@ -105,6 +121,7 @@ CONFIG_DEFAULT_IOSCHED="noop" CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_FREEZER is not set # # Blackfin Processor Options @@ -113,6 +130,10 @@ CONFIG_PREEMPT_NONE=y # # Processor and Board Settings # +# CONFIG_BF512 is not set +# CONFIG_BF514 is not set +# CONFIG_BF516 is not set +# CONFIG_BF518 is not set # CONFIG_BF522 is not set # CONFIG_BF523 is not set # CONFIG_BF524 is not set @@ -125,28 +146,38 @@ CONFIG_BF533=y # CONFIG_BF534 is not set # CONFIG_BF536 is not set # CONFIG_BF537 is not set +# CONFIG_BF538 is not set +# CONFIG_BF539 is not set # CONFIG_BF542 is not set +# CONFIG_BF542M is not set # CONFIG_BF544 is not set +# CONFIG_BF544M is not set # CONFIG_BF547 is not set +# CONFIG_BF547M is not set # CONFIG_BF548 is not set +# CONFIG_BF548M is not set # CONFIG_BF549 is not set +# CONFIG_BF549M is not set # CONFIG_BF561 is not set +CONFIG_BF_REV_MIN=3 +CONFIG_BF_REV_MAX=6 # CONFIG_BF_REV_0_0 is not set # CONFIG_BF_REV_0_1 is not set # CONFIG_BF_REV_0_2 is not set CONFIG_BF_REV_0_3=y # CONFIG_BF_REV_0_4 is not set # CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_0_6 is not set # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set CONFIG_BF53x=y -CONFIG_BFIN_SINGLE_CORE=y CONFIG_MEM_MT48LC16M16A2TG_75=y # CONFIG_BFIN533_EZKIT is not set # CONFIG_BFIN533_STAMP is not set +# CONFIG_BLACKSTAMP is not set CONFIG_BFIN533_BLUETECHNIX_CM=y # CONFIG_H8606_HVSISTEMAS is not set -# CONFIG_GENERIC_BF533_BOARD is not set +# CONFIG_BFIN532_IP0X is not set # # BF533/2/1 Specific Configuration @@ -188,6 +219,7 @@ CONFIG_WDTIMER=13 # Board customizations # # CONFIG_CMDLINE_BOOL is not set +CONFIG_BOOT_LOAD=0x1000 # # Clock/PLL Setup @@ -207,13 +239,20 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_TICKSOURCE_GPTMR0 is not set +CONFIG_TICKSOURCE_CORETMR=y +# CONFIG_CYCLES_CLOCKSOURCE is not set +# CONFIG_GPTMR0_CLOCKSOURCE is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # -# Memory Setup +# Misc # -CONFIG_MAX_MEM_SIZE=32 -CONFIG_MEM_ADD_WIDTH=9 -CONFIG_BOOT_LOAD=0x1000 CONFIG_BFIN_SCRATCH_REG_RETN=y # CONFIG_BFIN_SCRATCH_REG_RETE is not set # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set @@ -240,6 +279,12 @@ CONFIG_IP_CHECKSUM_L1=y CONFIG_CACHELINE_ALIGNED_L1=y CONFIG_SYSCALL_TAB_L1=y CONFIG_CPLB_SWITCH_TAB_L1=y +CONFIG_APP_STACK_L1=y + +# +# Speed Optimizations +# +CONFIG_BFIN_INS_LOWOVERHEAD=y CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set CONFIG_SELECT_MEMORY_MODEL=y @@ -248,12 +293,16 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 -CONFIG_LARGE_ALLOCS=y +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 # CONFIG_BFIN_GPTIMERS is not set +# CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y # CONFIG_DMA_UNCACHED_NONE is not set @@ -262,10 +311,9 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y -# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_EXTMEM_DCACHEABLE=y CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set @@ -276,7 +324,7 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_MPU is not set # -# Asynchonous Memory Configuration +# Asynchronous Memory Configuration # # @@ -301,12 +349,8 @@ CONFIG_BANK_3=0xFFC2 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # -# CONFIG_PCI is not set # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_PCCARD is not set # # Executable file formats @@ -315,22 +359,19 @@ CONFIG_BINFMT_ELF_FDPIC=y CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y CONFIG_BINFMT_SHARED_FLAT=y +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set -# CONFIG_PM_WAKEUP_BY_GPIO is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set - -# -# Networking -# CONFIG_NET=y # @@ -339,45 +380,13 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_DIAG is not set -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_NETLABEL is not set +# CONFIG_INET is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -385,31 +394,23 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -418,20 +419,22 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -444,12 +447,15 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers # -# CONFIG_MTD_CFI is not set +CONFIG_MTD_CFI=y # CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y @@ -460,6 +466,11 @@ CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +# CONFIG_MTD_PSD4256G is not set +CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_RAM=y # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set @@ -468,12 +479,16 @@ CONFIG_MTD_RAM=y # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_UCLINUX=y +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers # +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -489,36 +504,25 @@ CONFIG_MTD_UCLINUX=y # CONFIG_MTD_ONENAND is not set # -# UBI - Unsorted block images +# LPDDR flash memory drivers # -# CONFIG_MTD_UBI is not set +# CONFIG_MTD_LPDDR is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -526,34 +530,19 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set -# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_SMC91X=y -# CONFIG_SMSC911X is not set -# CONFIG_DM9000 is not set +# CONFIG_VETH is not set +# CONFIG_NET_ETHERNET is not set # CONFIG_NETDEV_1000 is not set -# CONFIG_AX88180 is not set # CONFIG_NETDEV_10000 is not set # @@ -561,22 +550,17 @@ CONFIG_SMC91X=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -593,16 +577,15 @@ CONFIG_SMC91X=y # # Character devices # -# CONFIG_AD9960 is not set -# CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PFLAGS is not set -# CONFIG_BF5xx_PPIFCD is not set +# CONFIG_BFIN_DMA_INTERFACE is not set +# CONFIG_BFIN_PPI is not set +# CONFIG_BFIN_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set -# CONFIG_BF5xx_PPI is not set -CONFIG_BFIN_SPORT=y -# CONFIG_BFIN_TIMER_LATENCY is not set +# CONFIG_BFIN_SPI_ADC is not set +# CONFIG_BFIN_SPORT is not set # CONFIG_VT is not set # CONFIG_DEVKMEM is not set +# CONFIG_BFIN_JTAG_COMM is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -613,6 +596,7 @@ CONFIG_BFIN_SPORT=y # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y CONFIG_SERIAL_BFIN_DMA=y @@ -623,176 +607,141 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # # CAN, the car bus and industrial fieldbus # # CONFIG_CAN4LINUX is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_SYSFS=y +CONFIG_SPI=y +CONFIG_SPI_MASTER=y # -# SPI support +# SPI Master Controller Drivers # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_SPI_BFIN=y +# CONFIG_SPI_BFIN_LOCK is not set +# CONFIG_SPI_BFIN_SPORT is not set +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set # -# Dallas's 1-wire bus +# SPI Protocol Masters # +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_DAB is not set +# CONFIG_VIDEO_MEDIA is not set # -# Graphics support +# Multimedia drivers # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DAB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # +# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set # -# USB support +# MMC/SD/SDIO Card Drivers # -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB is not set +CONFIG_MMC_BLOCK=y +# CONFIG_MMC_BLOCK_BOUNCE is not set +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set # -# Enable Host or Gadget support to see Inventra options -# - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set -# CONFIG_MMC is not set - -# -# LED devices +# MMC/SD/SDIO Host Controller Drivers # +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_SPI=m +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# +# CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# PBX support -# -# CONFIG_PBX is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -# CONFIG_EXT2_FS_POSIX_ACL is not set -# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -CONFIG_FS_MBCACHE=y +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y # CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -801,8 +750,11 @@ CONFIG_INOTIFY_USER=y # # DOS/FAT/NT Filesystems # +CONFIG_FAT_FS=y # CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # @@ -813,12 +765,8 @@ CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -826,60 +774,106 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_YAFFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# -# CONFIG_NFS_FS is not set -# CONFIG_NFSD is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set +# CONFIG_NILFS2_FS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Distributed Lock Manager -# -# CONFIG_DLM is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_SECTION_MISMATCH=y # CONFIG_DEBUG_KERNEL is not set -CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_DEBUG_VERBOSE=y CONFIG_DEBUG_MMRS=y +# CONFIG_DEBUG_DOUBLEFAULT is not set CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y @@ -888,34 +882,39 @@ CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set -# CONFIG_EARLY_PRINTK is not set +CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y +# CONFIG_BFIN_ISRAM_SELF_TEST is not set # # Security options # # CONFIG_KEYS is not set CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set -CONFIG_SECURITY_CAPABILITIES=y - -# -# Cryptographic options -# +# CONFIG_SECURITY_PATH is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_SECURITY_TOMOYO is not set # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=m +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC_T10DIF is not set +CONFIG_CRC_ITU_T=y CONFIG_CRC32=y +CONFIG_CRC7=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/blackfin/configs/CM-BF537E_defconfig b/arch/blackfin/configs/CM-BF537E_defconfig index d74b6f4..22e565c 100644 --- a/arch/blackfin/configs/CM-BF537E_defconfig +++ b/arch/blackfin/configs/CM-BF537E_defconfig @@ -1,13 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28.10 -# Wed Jun 3 06:27:41 2009 +# Linux kernel version: 2.6.30.5 # # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y +CONFIG_GENERIC_BUG=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y @@ -16,6 +16,9 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -26,21 +29,40 @@ CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +# CONFIG_KERNEL_GZIP is not set +# CONFIG_KERNEL_BZIP2 is not set +CONFIG_KERNEL_LZMA=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set -# CONFIG_BLK_DEV_INITRD is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_RD_GZIP is not set +# CONFIG_RD_BZIP2 is not set +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -49,7 +71,8 @@ CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_HOTPLUG is not set +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set @@ -65,12 +88,13 @@ CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -78,11 +102,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -98,7 +119,6 @@ CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -181,7 +201,8 @@ CONFIG_IRQ_MEM_DMA1=13 CONFIG_IRQ_WATCH=13 CONFIG_IRQ_SPI=10 # CONFIG_BFIN537_STAMP is not set -CONFIG_BFIN537_BLUETECHNIX_CM=y +CONFIG_BFIN537_BLUETECHNIX_CM_E=y +# CONFIG_BFIN537_BLUETECHNIX_CM_U is not set # CONFIG_BFIN537_BLUETECHNIX_TCM is not set # CONFIG_PNAV10 is not set # CONFIG_CAMSIG_MINOTAUR is not set @@ -283,10 +304,12 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 # CONFIG_BFIN_GPTIMERS is not set # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set @@ -297,10 +320,9 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y -# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_EXTMEM_DCACHEABLE=y CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set @@ -311,7 +333,7 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_MPU is not set # -# Asynchonous Memory Configuration +# Asynchronous Memory Configuration # # @@ -337,6 +359,7 @@ CONFIG_BANK_3=0xFFC2 # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # # CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set # # Executable file formats @@ -366,11 +389,6 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -394,7 +412,6 @@ CONFIG_IP_PNP=y # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set -CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" @@ -418,7 +435,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -429,8 +448,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -441,16 +460,21 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AR7_PARTS is not set # @@ -486,22 +510,26 @@ CONFIG_MTD_CFI_I2=y CONFIG_MTD_CFI_INTELEXT=y # CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set +# CONFIG_MTD_PSD4256G is not set CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_RAM=y -# CONFIG_MTD_ROM is not set +CONFIG_MTD_ROM=m # CONFIG_MTD_ABSENT is not set # # Mapping drivers for chip access # CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set CONFIG_MTD_GPIO_ADDR=y -CONFIG_MTD_UCLINUX=y +# CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers # +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -517,6 +545,11 @@ CONFIG_MTD_UCLINUX=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -533,9 +566,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -549,6 +587,7 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -570,6 +609,9 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -580,8 +622,11 @@ CONFIG_BFIN_TX_DESC_NUM=10 CONFIG_BFIN_RX_DESC_NUM=20 # CONFIG_BFIN_MAC_RMII is not set # CONFIG_SMC91X is not set -# CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -598,7 +643,10 @@ CONFIG_BFIN_RX_DESC_NUM=20 # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -622,15 +670,12 @@ CONFIG_BFIN_RX_DESC_NUM=20 # # Character devices # -# CONFIG_AD9960 is not set CONFIG_BFIN_DMA_INTERFACE=m # CONFIG_BFIN_PPI is not set # CONFIG_BFIN_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BFIN_SPI_ADC is not set CONFIG_BFIN_SPORT=y -# CONFIG_BFIN_TIMER_LATENCY is not set -# CONFIG_SIMPLE_GPIO is not set # CONFIG_VT is not set # CONFIG_DEVKMEM is not set # CONFIG_BFIN_JTAG_COMM is not set @@ -644,6 +689,7 @@ CONFIG_BFIN_SPORT=y # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y CONFIG_SERIAL_BFIN_DMA=y @@ -656,6 +702,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # @@ -668,7 +715,23 @@ CONFIG_UNIX98_PTYS=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set -# CONFIG_SPI is not set +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BFIN=y +# CONFIG_SPI_BFIN_LOCK is not set +# CONFIG_SPI_BFIN_SPORT is not set +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y @@ -688,15 +751,21 @@ CONFIG_GPIO_SYSFS=y # # SPI GPIO expanders: # +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set @@ -758,21 +827,74 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set - -# -# Enable Host or Gadget support to see Inventra options -# - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; -# -# CONFIG_USB_GADGET is not set -# CONFIG_MMC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +CONFIG_USB_GADGET_NET2272=y +CONFIG_USB_NET2272=m +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +# CONFIG_MMC_BLOCK_BOUNCE is not set +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_SPI=m # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -789,9 +911,10 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -801,6 +924,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -809,8 +937,11 @@ CONFIG_INOTIFY_USER=y # # DOS/FAT/NT Filesystems # -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # @@ -822,10 +953,7 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -833,9 +961,19 @@ CONFIG_SYSFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS2_FS is not set -# CONFIG_YAFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -844,14 +982,70 @@ CONFIG_SYSFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NETWORK_FILESYSTEMS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set # @@ -867,14 +1061,28 @@ CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_SECTION_MISMATCH=y # CONFIG_DEBUG_KERNEL is not set -CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_DEBUG_VERBOSE=y @@ -888,9 +1096,10 @@ CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set -# CONFIG_EARLY_PRINTK is not set +CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y +# CONFIG_BFIN_ISRAM_SELF_TEST is not set # # Security options @@ -899,8 +1108,9 @@ CONFIG_ACCESS_CHECK=y CONFIG_SECURITY=y # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_PATH is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +# CONFIG_SECURITY_TOMOYO is not set CONFIG_CRYPTO=y # @@ -979,6 +1189,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -986,19 +1197,24 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set -# CONFIG_CRC_ITU_T is not set +CONFIG_CRC_ITU_T=y CONFIG_CRC32=y -# CONFIG_CRC7 is not set +CONFIG_CRC7=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/blackfin/configs/CM-BF537U_defconfig b/arch/blackfin/configs/CM-BF537U_defconfig index 7fc8dfa..efcc90d 100644 --- a/arch/blackfin/configs/CM-BF537U_defconfig +++ b/arch/blackfin/configs/CM-BF537U_defconfig @@ -1,94 +1,111 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.16 +# Linux kernel version: 2.6.30.5 # # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y +CONFIG_GENERIC_BUG=y CONFIG_ZONE_DMA=y -CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_TIME=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +# CONFIG_KERNEL_GZIP is not set +# CONFIG_KERNEL_BZIP2 is not set +CONFIG_KERNEL_LZMA=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set -# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_RD_GZIP is not set +# CONFIG_RD_BZIP2 is not set +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -# CONFIG_SYSCTL is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_UID16 is not set # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_HOTPLUG is not set +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 -# CONFIG_NP2 is not set +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set -CONFIG_RT_MUTEXES=y -CONFIG_TINY_SHMEM=y +CONFIG_MMAP_ALLOW_UNINITIALIZED=y +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -105,6 +122,7 @@ CONFIG_DEFAULT_IOSCHED="noop" CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_FREEZER is not set # # Blackfin Processor Options @@ -113,6 +131,10 @@ CONFIG_PREEMPT_NONE=y # # Processor and Board Settings # +# CONFIG_BF512 is not set +# CONFIG_BF514 is not set +# CONFIG_BF516 is not set +# CONFIG_BF518 is not set # CONFIG_BF522 is not set # CONFIG_BF523 is not set # CONFIG_BF524 is not set @@ -125,22 +147,31 @@ CONFIG_PREEMPT_NONE=y # CONFIG_BF534 is not set # CONFIG_BF536 is not set CONFIG_BF537=y +# CONFIG_BF538 is not set +# CONFIG_BF539 is not set # CONFIG_BF542 is not set +# CONFIG_BF542M is not set # CONFIG_BF544 is not set +# CONFIG_BF544M is not set # CONFIG_BF547 is not set +# CONFIG_BF547M is not set # CONFIG_BF548 is not set +# CONFIG_BF548M is not set # CONFIG_BF549 is not set +# CONFIG_BF549M is not set # CONFIG_BF561 is not set +CONFIG_BF_REV_MIN=2 +CONFIG_BF_REV_MAX=3 # CONFIG_BF_REV_0_0 is not set # CONFIG_BF_REV_0_1 is not set CONFIG_BF_REV_0_2=y # CONFIG_BF_REV_0_3 is not set # CONFIG_BF_REV_0_4 is not set # CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_0_6 is not set # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set CONFIG_BF53x=y -CONFIG_BFIN_SINGLE_CORE=y CONFIG_MEM_MT48LC16M16A2TG_75=y CONFIG_IRQ_PLL_WAKEUP=7 CONFIG_IRQ_RTC=8 @@ -150,7 +181,6 @@ CONFIG_IRQ_SPORT0_TX=9 CONFIG_IRQ_SPORT1_RX=9 CONFIG_IRQ_SPORT1_TX=9 CONFIG_IRQ_TWI=10 -CONFIG_IRQ_SPI=10 CONFIG_IRQ_UART0_RX=10 CONFIG_IRQ_UART0_TX=10 CONFIG_IRQ_UART1_RX=10 @@ -169,11 +199,13 @@ CONFIG_IRQ_PORTG_INTB=12 CONFIG_IRQ_MEM_DMA0=13 CONFIG_IRQ_MEM_DMA1=13 CONFIG_IRQ_WATCH=13 +CONFIG_IRQ_SPI=10 # CONFIG_BFIN537_STAMP is not set -CONFIG_BFIN537_BLUETECHNIX_CM=y +# CONFIG_BFIN537_BLUETECHNIX_CM_E is not set +CONFIG_BFIN537_BLUETECHNIX_CM_U=y +# CONFIG_BFIN537_BLUETECHNIX_TCM is not set # CONFIG_PNAV10 is not set # CONFIG_CAMSIG_MINOTAUR is not set -# CONFIG_GENERIC_BF537_BOARD is not set # # BF537 Specific Configuration @@ -196,6 +228,7 @@ CONFIG_IRQ_PROG_INTA=12 # Board customizations # # CONFIG_CMDLINE_BOOL is not set +CONFIG_BOOT_LOAD=0x1000 # # Clock/PLL Setup @@ -215,13 +248,20 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_TICKSOURCE_GPTMR0 is not set +CONFIG_TICKSOURCE_CORETMR=y +# CONFIG_CYCLES_CLOCKSOURCE is not set +# CONFIG_GPTMR0_CLOCKSOURCE is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # -# Memory Setup +# Misc # -CONFIG_MAX_MEM_SIZE=32 -CONFIG_MEM_ADD_WIDTH=9 -CONFIG_BOOT_LOAD=0x1000 CONFIG_BFIN_SCRATCH_REG_RETN=y # CONFIG_BFIN_SCRATCH_REG_RETE is not set # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set @@ -248,6 +288,12 @@ CONFIG_IP_CHECKSUM_L1=y CONFIG_CACHELINE_ALIGNED_L1=y CONFIG_SYSCALL_TAB_L1=y CONFIG_CPLB_SWITCH_TAB_L1=y +CONFIG_APP_STACK_L1=y + +# +# Speed Optimizations +# +CONFIG_BFIN_INS_LOWOVERHEAD=y CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set CONFIG_SELECT_MEMORY_MODEL=y @@ -256,12 +302,16 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 -CONFIG_LARGE_ALLOCS=y +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 # CONFIG_BFIN_GPTIMERS is not set +# CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y # CONFIG_DMA_UNCACHED_NONE is not set @@ -270,10 +320,9 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y -# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_EXTMEM_DCACHEABLE=y CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set @@ -284,7 +333,7 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_MPU is not set # -# Asynchonous Memory Configuration +# Asynchronous Memory Configuration # # @@ -309,12 +358,8 @@ CONFIG_BANK_3=0xFFC2 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # -# CONFIG_PCI is not set # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_PCCARD is not set # # Executable file formats @@ -323,22 +368,19 @@ CONFIG_BINFMT_ELF_FDPIC=y CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y CONFIG_BINFMT_SHARED_FLAT=y +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set -# CONFIG_PM_WAKEUP_BY_GPIO is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set - -# -# Networking -# CONFIG_NET=y # @@ -347,10 +389,6 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -369,15 +407,13 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set +CONFIG_INET_LRO=y # CONFIG_INET_DIAG is not set -CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set @@ -386,6 +422,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -395,29 +432,23 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -426,20 +457,22 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -452,12 +485,15 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers # -# CONFIG_MTD_CFI is not set +CONFIG_MTD_CFI=y # CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y @@ -468,20 +504,29 @@ CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +# CONFIG_MTD_PSD4256G is not set +CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_RAM=y -# CONFIG_MTD_ROM is not set +CONFIG_MTD_ROM=m # CONFIG_MTD_ABSENT is not set # # Mapping drivers for chip access # -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_UCLINUX=y +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_GPIO_ADDR=y +# CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers # +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -497,36 +542,36 @@ CONFIG_MTD_UCLINUX=y # CONFIG_MTD_ONENAND is not set # -# UBI - Unsorted block images +# LPDDR flash memory drivers # -# CONFIG_MTD_UBI is not set +# CONFIG_MTD_LPDDR is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set # -# Misc devices +# EEPROM support # +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -534,35 +579,20 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_SMC91X=y -# CONFIG_BFIN_MAC is not set -# CONFIG_SMSC911X is not set -# CONFIG_DM9000 is not set +# CONFIG_VETH is not set +# CONFIG_NET_ETHERNET is not set # CONFIG_NETDEV_1000 is not set -# CONFIG_AX88180 is not set # CONFIG_NETDEV_10000 is not set # @@ -570,22 +600,17 @@ CONFIG_SMC91X=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -602,16 +627,15 @@ CONFIG_SMC91X=y # # Character devices # -# CONFIG_AD9960 is not set -# CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PFLAGS is not set -# CONFIG_BF5xx_PPIFCD is not set +CONFIG_BFIN_DMA_INTERFACE=m +# CONFIG_BFIN_PPI is not set +# CONFIG_BFIN_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set -# CONFIG_BF5xx_PPI is not set +# CONFIG_BFIN_SPI_ADC is not set CONFIG_BFIN_SPORT=y -# CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_VT is not set # CONFIG_DEVKMEM is not set +# CONFIG_BFIN_JTAG_COMM is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -622,6 +646,7 @@ CONFIG_BFIN_SPORT=y # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y CONFIG_SERIAL_BFIN_DMA=y @@ -634,165 +659,201 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # # CAN, the car bus and industrial fieldbus # # CONFIG_CAN4LINUX is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +CONFIG_SPI=y +CONFIG_SPI_MASTER=y # -# TPM devices +# SPI Master Controller Drivers # -# CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set +CONFIG_SPI_BFIN=y +# CONFIG_SPI_BFIN_LOCK is not set +# CONFIG_SPI_BFIN_SPORT is not set +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y # -# SPI support +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # -# Dallas's 1-wire bus +# PCI GPIO expanders: # + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set -# CONFIG_DAB is not set +# CONFIG_VIDEO_MEDIA is not set # -# Graphics support +# Multimedia drivers # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DAB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # +# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set - -# -# USB support -# +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set # CONFIG_USB is not set -# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # CONFIG_USB_GADGET_MUSB_HDRC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set # CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set CONFIG_USB_GADGET_NET2272=y CONFIG_USB_NET2272=y # CONFIG_USB_GADGET_NET2280 is not set -# CONFIG_USB_GADGET_PXA2XX is not set # CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_AT91 is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_ZERO is not set -# CONFIG_USB_ETH is not set +# CONFIG_USB_AUDIO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y # CONFIG_USB_GADGETFS is not set # CONFIG_USB_FILE_STORAGE is not set # CONFIG_USB_G_SERIAL is not set # CONFIG_USB_MIDI_GADGET is not set -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set # -# InfiniBand support +# OTG and related infrastructure # +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set # -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# MMC/SD/SDIO Card Drivers # +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set # -# Real Time Clock +# MMC/SD/SDIO Host Controller Drivers # +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_SPI=m +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# PBX support -# -# CONFIG_PBX is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -802,25 +863,29 @@ CONFIG_EXT2_FS_XATTR=y # CONFIG_EXT2_FS_POSIX_ACL is not set # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +# CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -829,8 +894,11 @@ CONFIG_INOTIFY_USER=y # # DOS/FAT/NT Filesystems # -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # @@ -841,12 +909,8 @@ CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -854,18 +918,29 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_YAFFS_FS is not set -# CONFIG_JFFS2_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set # CONFIG_SMB_FS is not set @@ -873,41 +948,94 @@ CONFIG_RAMFS=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Distributed Lock Manager -# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set # -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_SECTION_MISMATCH=y # CONFIG_DEBUG_KERNEL is not set -CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_DEBUG_VERBOSE=y CONFIG_DEBUG_MMRS=y +# CONFIG_DEBUG_DOUBLEFAULT is not set CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y @@ -916,34 +1044,40 @@ CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set -# CONFIG_EARLY_PRINTK is not set +CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y +# CONFIG_BFIN_ISRAM_SELF_TEST is not set # # Security options # # CONFIG_KEYS is not set CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set -CONFIG_SECURITY_CAPABILITIES=y - -# -# Cryptographic options -# +# CONFIG_SECURITY_PATH is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_SECURITY_TOMOYO is not set # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC_T10DIF is not set +CONFIG_CRC_ITU_T=y CONFIG_CRC32=y +CONFIG_CRC7=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig index acca4e5..7f579cf 100644 --- a/arch/blackfin/configs/CM-BF548_defconfig +++ b/arch/blackfin/configs/CM-BF548_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24.4 +# Linux kernel version: 2.6.30.5 # # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y +CONFIG_GENERIC_BUG=y CONFIG_ZONE_DMA=y -CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y @@ -16,6 +16,9 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -26,79 +29,100 @@ CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +# CONFIG_KERNEL_GZIP is not set +# CONFIG_KERNEL_BZIP2 is not set +CONFIG_KERNEL_LZMA=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set -# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +# CONFIG_RD_GZIP is not set +# CONFIG_RD_BZIP2 is not set +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -# CONFIG_SYSCTL is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y -CONFIG_UID16=y +# CONFIG_UID16 is not set # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 -# CONFIG_NP2 is not set +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -# CONFIG_PREEMPT_NONE is not set -CONFIG_PREEMPT_VOLUNTARY=y +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_FREEZER is not set # # Blackfin Processor Options @@ -107,6 +131,10 @@ CONFIG_PREEMPT_VOLUNTARY=y # # Processor and Board Settings # +# CONFIG_BF512 is not set +# CONFIG_BF514 is not set +# CONFIG_BF516 is not set +# CONFIG_BF518 is not set # CONFIG_BF522 is not set # CONFIG_BF523 is not set # CONFIG_BF524 is not set @@ -119,19 +147,29 @@ CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_BF534 is not set # CONFIG_BF536 is not set # CONFIG_BF537 is not set +# CONFIG_BF538 is not set +# CONFIG_BF539 is not set # CONFIG_BF542 is not set +# CONFIG_BF542M is not set # CONFIG_BF544 is not set +# CONFIG_BF544M is not set # CONFIG_BF547 is not set -CONFIG_BF548=y +# CONFIG_BF547M is not set +CONFIG_BF548_std=y +# CONFIG_BF548M is not set # CONFIG_BF549 is not set +# CONFIG_BF549M is not set # CONFIG_BF561 is not set +CONFIG_BF_REV_MIN=0 +CONFIG_BF_REV_MAX=2 # CONFIG_BF_REV_0_0 is not set # CONFIG_BF_REV_0_1 is not set -CONFIG_BF_REV_0_2=y +# CONFIG_BF_REV_0_2 is not set # CONFIG_BF_REV_0_3 is not set # CONFIG_BF_REV_0_4 is not set # CONFIG_BF_REV_0_5 is not set -# CONFIG_BF_REV_ANY is not set +# CONFIG_BF_REV_0_6 is not set +CONFIG_BF_REV_ANY=y # CONFIG_BF_REV_NONE is not set CONFIG_BF54x=y CONFIG_IRQ_PLL_WAKEUP=7 @@ -140,15 +178,12 @@ CONFIG_IRQ_SPORT0_RX=9 CONFIG_IRQ_SPORT0_TX=9 CONFIG_IRQ_SPORT1_RX=9 CONFIG_IRQ_SPORT1_TX=9 +CONFIG_IRQ_SPI0=10 CONFIG_IRQ_UART0_RX=10 CONFIG_IRQ_UART0_TX=10 CONFIG_IRQ_UART1_RX=10 CONFIG_IRQ_UART1_TX=10 CONFIG_IRQ_CNT=8 -CONFIG_IRQ_USB_INT0=11 -CONFIG_IRQ_USB_INT1=11 -CONFIG_IRQ_USB_INT2=11 -CONFIG_IRQ_USB_DMA=11 CONFIG_IRQ_TIMER0=11 CONFIG_IRQ_TIMER1=11 CONFIG_IRQ_TIMER2=11 @@ -157,9 +192,21 @@ CONFIG_IRQ_TIMER4=11 CONFIG_IRQ_TIMER5=11 CONFIG_IRQ_TIMER6=11 CONFIG_IRQ_TIMER7=11 +CONFIG_IRQ_USB_INT0=11 +CONFIG_IRQ_USB_INT1=11 +CONFIG_IRQ_USB_INT2=11 +CONFIG_IRQ_USB_DMA=11 CONFIG_IRQ_TIMER8=11 CONFIG_IRQ_TIMER9=11 CONFIG_IRQ_TIMER10=11 +CONFIG_IRQ_SPORT2_RX=9 +CONFIG_IRQ_SPORT2_TX=9 +CONFIG_IRQ_SPORT3_RX=9 +CONFIG_IRQ_SPORT3_TX=9 +CONFIG_IRQ_SPI1=10 +CONFIG_IRQ_SPI2=10 +CONFIG_IRQ_TWI0=11 +CONFIG_IRQ_TWI1=11 # CONFIG_BFIN548_EZKIT is not set CONFIG_BFIN548_BLUETECHNIX_CM=y @@ -167,6 +214,7 @@ CONFIG_BFIN548_BLUETECHNIX_CM=y # BF548 Specific Configuration # # CONFIG_DEB_DMA_URGENT is not set +# CONFIG_BF548_ATAPI_ALTERNATIVE_PORT is not set # # Interrupt Priority Assignment @@ -182,7 +230,6 @@ CONFIG_IRQ_SPORT1_ERR=7 CONFIG_IRQ_SPI0_ERR=7 CONFIG_IRQ_UART0_ERR=7 CONFIG_IRQ_EPPI0=8 -CONFIG_IRQ_SPI0=10 CONFIG_IRQ_PINT0=12 CONFIG_IRQ_PINT1=12 CONFIG_IRQ_MDMAS0=13 @@ -197,18 +244,10 @@ CONFIG_IRQ_SPI2_ERR=7 CONFIG_IRQ_UART1_ERR=7 CONFIG_IRQ_UART2_ERR=7 CONFIG_IRQ_CAN0_ERR=7 -CONFIG_IRQ_SPORT2_RX=9 -CONFIG_IRQ_SPORT2_TX=9 -CONFIG_IRQ_SPORT3_RX=9 -CONFIG_IRQ_SPORT3_TX=9 CONFIG_IRQ_EPPI1=9 CONFIG_IRQ_EPPI2=9 -CONFIG_IRQ_SPI1=10 -CONFIG_IRQ_SPI2=10 CONFIG_IRQ_ATAPI_RX=10 CONFIG_IRQ_ATAPI_TX=10 -CONFIG_IRQ_TWI0=11 -CONFIG_IRQ_TWI1=11 CONFIG_IRQ_CAN0_RX=11 CONFIG_IRQ_CAN0_TX=11 CONFIG_IRQ_MDMAS2=13 @@ -255,6 +294,7 @@ CONFIG_PINT3_ASSIGN=0x02020303 # Board customizations # # CONFIG_CMDLINE_BOOL is not set +CONFIG_BOOT_LOAD=0x1000 # # Clock/PLL Setup @@ -274,16 +314,12 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set # CONFIG_GENERIC_TIME is not set -# CONFIG_TICK_ONESHOT is not set # -# Memory Setup +# Misc # -CONFIG_MAX_MEM_SIZE=64 -# CONFIG_MEM_MT46V32M16_6T is not set -CONFIG_MEM_MT46V32M16_5B=y -CONFIG_BOOT_LOAD=0x1000 CONFIG_BFIN_SCRATCH_REG_RETN=y # CONFIG_BFIN_SCRATCH_REG_RETE is not set # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set @@ -310,6 +346,12 @@ CONFIG_ACCESS_OK_L1=y CONFIG_CACHELINE_ALIGNED_L1=y # CONFIG_SYSCALL_TAB_L1 is not set # CONFIG_CPLB_SWITCH_TAB_L1 is not set +CONFIG_APP_STACK_L1=y + +# +# Speed Optimizations +# +CONFIG_BFIN_INS_LOWOVERHEAD=y CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set CONFIG_SELECT_MEMORY_MODEL=y @@ -318,13 +360,16 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 # CONFIG_BFIN_GPTIMERS is not set +# CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y # CONFIG_DMA_UNCACHED_NONE is not set @@ -333,14 +378,13 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y -# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +# CONFIG_BFIN_L2_ICACHEABLE is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_EXTMEM_DCACHEABLE=y -CONFIG_BFIN_EXTMEM_WRITEBACK=y -# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set -# CONFIG_BFIN_L2_ICACHEABLE is not set +# CONFIG_BFIN_EXTMEM_WRITEBACK +CONFIG_BFIN_EXTMEM_WRITETHROUGH=y # CONFIG_BFIN_L2_DCACHEABLE is not set # @@ -349,7 +393,7 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_MPU is not set # -# Asynchonous Memory Configuration +# Asynchronous Memory Configuration # # @@ -369,7 +413,7 @@ CONFIG_C_AMBEN_ALL=y CONFIG_BANK_0=0x7BB0 CONFIG_BANK_1=0x5554 CONFIG_BANK_2=0x7BB0 -CONFIG_BANK_3=0x99B2 +CONFIG_BANK_3=0x99B3 CONFIG_EBIU_MBSCTLVAL=0x0 CONFIG_EBIU_MODEVAL=0x1 CONFIG_EBIU_FCTLVAL=0x6 @@ -377,7 +421,6 @@ CONFIG_EBIU_FCTLVAL=0x6 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # -# CONFIG_PCI is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set @@ -388,23 +431,19 @@ CONFIG_BINFMT_ELF_FDPIC=y CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y # CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -# CONFIG_PM_WAKEUP_BY_GPIO is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set - -# -# Networking -# CONFIG_NET=y # @@ -417,6 +456,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -435,19 +475,16 @@ CONFIG_IP_PNP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set -CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set @@ -456,6 +493,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -465,24 +503,21 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -501,10 +536,12 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -539,6 +576,7 @@ CONFIG_MTD_CFI_I2=y CONFIG_MTD_CFI_INTELEXT=y # CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set +# CONFIG_MTD_PSD4256G is not set CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_RAM=y # CONFIG_MTD_ROM is not set @@ -549,9 +587,8 @@ CONFIG_MTD_RAM=y # CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x20000000 -CONFIG_MTD_PHYSMAP_LEN=0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_GPIO_ADDR is not set # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -575,6 +612,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -587,31 +629,31 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set -CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y +CONFIG_SCSI=m CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set -# CONFIG_SCSI_PROC_FS is not set +CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # -CONFIG_BLK_DEV_SD=y +CONFIG_BLK_DEV_SD=m # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set +# CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set @@ -632,29 +674,54 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_SMC91X is not set -CONFIG_SMSC911X=y # CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +CONFIG_SMSC911X=y +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -666,6 +733,10 @@ CONFIG_SMSC911X=y # CONFIG_WLAN_80211 is not set # +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -676,7 +747,6 @@ CONFIG_SMSC911X=y # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -711,6 +781,7 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_GPIO is not set # CONFIG_KEYBOARD_BFIN is not set # CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_ADP5588 is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -726,19 +797,16 @@ CONFIG_INPUT_KEYBOARD=y # # Character devices # -# CONFIG_AD9960 is not set -# CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PPIFCD is not set +CONFIG_BFIN_DMA_INTERFACE=m +# CONFIG_BFIN_PPI is not set +# CONFIG_BFIN_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set -# CONFIG_BF5xx_PPI is not set -CONFIG_BFIN_OTP=y -# CONFIG_BFIN_OTP_WRITE_ENABLE is not set +# CONFIG_BFIN_SPI_ADC is not set # CONFIG_BFIN_SPORT is not set -# CONFIG_BFIN_TIMER_LATENCY is not set -# CONFIG_TWI_LCD is not set -# CONFIG_SIMPLE_GPIO is not set +# CONFIG_BFIN_TWI_LCD is not set # CONFIG_VT is not set -# CONFIG_DEVKMEM is not set +CONFIG_DEVKMEM=y +# CONFIG_BFIN_JTAG_COMM is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -749,10 +817,11 @@ CONFIG_BFIN_OTP=y # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y -CONFIG_SERIAL_BFIN_DMA=y -# CONFIG_SERIAL_BFIN_PIO is not set +# CONFIG_SERIAL_BFIN_DMA is not set +CONFIG_SERIAL_BFIN_PIO=y # CONFIG_SERIAL_BFIN_UART0 is not set CONFIG_SERIAL_BFIN_UART1=y # CONFIG_BFIN_UART1_CTSRTS is not set @@ -762,7 +831,10 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set +CONFIG_BFIN_OTP=y +# CONFIG_BFIN_OTP_WRITE_ENABLE is not set # # CAN, the car bus and industrial fieldbus @@ -770,61 +842,53 @@ CONFIG_UNIX98_PTYS=y # CONFIG_CAN4LINUX is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # -# I2C Algorithms +# I2C Hardware Bus support # -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set # -# I2C Hardware Bus support +# I2C system bus drivers (mostly embedded / system-on-chip) # CONFIG_I2C_BLACKFIN_TWI=y -CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 +CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set # CONFIG_I2C_TINY_USB is not set # +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_AD5252 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8575 is not set -# CONFIG_SENSORS_PCA9543 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_SYSFS=y - -# -# SPI support -# CONFIG_SPI=y CONFIG_SPI_MASTER=y @@ -832,64 +896,23 @@ CONFIG_SPI_MASTER=y # SPI Master Controller Drivers # CONFIG_SPI_BFIN=y +# CONFIG_SPI_BFIN_LOCK is not set +# CONFIG_SPI_BFIN_SPORT is not set # CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_AD7418 is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1029 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_F71882FG is not set -# CONFIG_SENSORS_F75375S is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM70 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_LM93 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_MAX6650 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_DME1737 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47M192 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_THMC50 is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83791D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83793 is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -903,25 +926,43 @@ CONFIG_BFIN_WDT=y # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set -# CONFIG_USB_DABUSB is not set # # Graphics support @@ -935,80 +976,75 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set -CONFIG_HID_SUPPORT=y -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set -# CONFIG_HIDRAW is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set +# CONFIG_HID_SUPPORT is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set -CONFIG_USB=y +CONFIG_USB=m # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # -# CONFIG_USB_DEVICEFS is not set -CONFIG_USB_DEVICE_CLASS=y +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=m +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set -CONFIG_USB_MUSB_HDRC=y +# CONFIG_USB_HWA_HCD is not set +CONFIG_USB_MUSB_HDRC=m CONFIG_USB_MUSB_SOC=y # -# Blackfin BF54x, BF525 and BF527 high speed USB support +# Blackfin high speed USB Support # -CONFIG_USB_MUSB_HOST=y -# CONFIG_USB_MUSB_PERIPHERAL is not set +# CONFIG_USB_MUSB_HOST is not set +CONFIG_USB_MUSB_PERIPHERAL=y # CONFIG_USB_MUSB_OTG is not set -CONFIG_USB_MUSB_HDRC_HCD=y +CONFIG_USB_GADGET_MUSB_HDRC=y # CONFIG_MUSB_PIO_ONLY is not set -# CONFIG_USB_INVENTRA_DMA is not set +CONFIG_USB_INVENTRA_DMA=y # CONFIG_USB_TI_CPPI_DMA is not set -CONFIG_USB_MUSB_LOGLEVEL=0 +# CONFIG_USB_MUSB_DEBUG is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# may also be needed; see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # -CONFIG_USB_STORAGE=y +CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -1016,6 +1052,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1023,15 +1060,10 @@ CONFIG_USB_STORAGE=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1040,7 +1072,7 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1048,7 +1080,6 @@ CONFIG_USB_MON=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1056,38 +1087,75 @@ CONFIG_USB_MON=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set -CONFIG_MMC=y +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2272 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +CONFIG_USB_ZERO=m +# CONFIG_USB_AUDIO is not set +CONFIG_USB_ETH=m +# CONFIG_USB_ETH_RNDIS is not set +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_USB_G_PRINTER=m +# CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=m # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set # -# MMC/SD Card Drivers +# MMC/SD/SDIO Card Drivers # -CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK=m CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set # -# MMC/SD Host Controller Drivers +# MMC/SD/SDIO Host Controller Drivers # -CONFIG_SDH_BFIN=y +# CONFIG_MMC_SDHCI is not set +CONFIG_SDH_BFIN=m +# CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND is not set +# CONFIG_SDH_BFIN_ENABLE_SDIO_IRQ is not set # CONFIG_MMC_SPI is not set -# CONFIG_SPI_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=m +CONFIG_RTC_CLASS=m # # RTC interfaces @@ -1111,66 +1179,74 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers # -# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # -CONFIG_RTC_DRV_BFIN=y - -# -# Userspace I/O -# +CONFIG_RTC_DRV_BFIN=m +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set - -# -# PBX support -# -# CONFIG_PBX is not set +# CONFIG_STAGING is not set # # File systems # -# CONFIG_EXT2_FS is not set +CONFIG_EXT2_FS=m +# CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y # CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y +# CONFIG_ISO9660_FS is not set # CONFIG_UDF_FS is not set # @@ -1194,10 +1270,7 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1205,17 +1278,7 @@ CONFIG_SYSFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -CONFIG_YAFFS_FS=m -CONFIG_YAFFS_YAFFS1=y -# CONFIG_YAFFS_DOES_ECC is not set -CONFIG_YAFFS_YAFFS2=y -CONFIG_YAFFS_AUTO_YAFFS2=y -# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10 -# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set -# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set -CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y -CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_FS_WBUF_VERIFY is not set @@ -1227,34 +1290,30 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=m -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -# CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y +# CONFIG_NFSD is not set CONFIG_LOCKD=m CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y -CONFIG_SMB_NLS_REMOTE="cp437" -CONFIG_CIFS=y +# CONFIG_SMB_FS is not set +CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set # CONFIG_CIFS_WEAK_PW_HASH is not set # CONFIG_CIFS_XATTR is not set @@ -1267,24 +1326,8 @@ CONFIG_CIFS=y # # Partition Types # -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set +# CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m @@ -1326,9 +1369,6 @@ CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m # CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set # # Kernel hacking @@ -1336,14 +1376,39 @@ CONFIG_INSTRUMENTATION=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_SECTION_MISMATCH=y # CONFIG_DEBUG_KERNEL is not set -CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set -CONFIG_DEBUG_MMRS=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_DEBUG_VERBOSE=y +# CONFIG_DEBUG_MMRS is not set +# CONFIG_DEBUG_DOUBLEFAULT is not set CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y @@ -1352,33 +1417,125 @@ CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set -# CONFIG_EARLY_PRINTK is not set +CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y +# CONFIG_BFIN_ISRAM_SELF_TEST is not set # # Security options # # CONFIG_KEYS is not set CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set -# CONFIG_SECURITY_CAPABILITIES is not set -# CONFIG_SECURITY_ROOTPLUG is not set -# CONFIG_CRYPTO is not set +# CONFIG_SECURITY_PATH is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_SECURITY_TOMOYO is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_PLIST=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/blackfin/configs/CM-BF561_defconfig b/arch/blackfin/configs/CM-BF561_defconfig index bae4ee6..a6df01d 100644 --- a/arch/blackfin/configs/CM-BF561_defconfig +++ b/arch/blackfin/configs/CM-BF561_defconfig @@ -1,15 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24.4 -# Tue Apr 1 10:50:11 2008 +# Linux kernel version: 2.6.30.5 # # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y +CONFIG_GENERIC_BUG=y CONFIG_ZONE_DMA=y -CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y @@ -17,6 +16,9 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -27,62 +29,83 @@ CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +# CONFIG_KERNEL_GZIP is not set +# CONFIG_KERNEL_BZIP2 is not set +CONFIG_KERNEL_LZMA=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set -# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set -# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_RD_GZIP is not set +# CONFIG_RD_BZIP2 is not set +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -# CONFIG_SYSCTL is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_UID16 is not set # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_HOTPLUG is not set +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_EVENTFD=y +# CONFIG_SIGNALFD is not set +# CONFIG_TIMERFD is not set +# CONFIG_EVENTFD is not set +# CONFIG_AIO is not set CONFIG_VM_EVENT_COUNTERS=y -CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 -# CONFIG_NP2 is not set +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -99,6 +122,7 @@ CONFIG_DEFAULT_IOSCHED="noop" CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_FREEZER is not set # # Blackfin Processor Options @@ -107,6 +131,10 @@ CONFIG_PREEMPT_NONE=y # # Processor and Board Settings # +# CONFIG_BF512 is not set +# CONFIG_BF514 is not set +# CONFIG_BF516 is not set +# CONFIG_BF518 is not set # CONFIG_BF522 is not set # CONFIG_BF523 is not set # CONFIG_BF524 is not set @@ -119,30 +147,47 @@ CONFIG_PREEMPT_NONE=y # CONFIG_BF534 is not set # CONFIG_BF536 is not set # CONFIG_BF537 is not set +# CONFIG_BF538 is not set +# CONFIG_BF539 is not set # CONFIG_BF542 is not set +# CONFIG_BF542M is not set # CONFIG_BF544 is not set +# CONFIG_BF544M is not set # CONFIG_BF547 is not set +# CONFIG_BF547M is not set # CONFIG_BF548 is not set +# CONFIG_BF548M is not set # CONFIG_BF549 is not set +# CONFIG_BF549M is not set CONFIG_BF561=y +# CONFIG_SMP is not set +CONFIG_BF_REV_MIN=3 +CONFIG_BF_REV_MAX=5 # CONFIG_BF_REV_0_0 is not set # CONFIG_BF_REV_0_1 is not set # CONFIG_BF_REV_0_2 is not set CONFIG_BF_REV_0_3=y # CONFIG_BF_REV_0_4 is not set # CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_0_6 is not set # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set -CONFIG_BFIN_DUAL_CORE=y CONFIG_MEM_MT48LC8M32B2B5_7=y CONFIG_IRQ_PLL_WAKEUP=7 CONFIG_IRQ_SPORT0_ERROR=7 CONFIG_IRQ_SPORT1_ERROR=7 +CONFIG_IRQ_TIMER0=10 +CONFIG_IRQ_TIMER1=10 +CONFIG_IRQ_TIMER2=10 +CONFIG_IRQ_TIMER3=10 +CONFIG_IRQ_TIMER4=10 +CONFIG_IRQ_TIMER5=10 +CONFIG_IRQ_TIMER6=10 +CONFIG_IRQ_TIMER7=10 CONFIG_IRQ_SPI_ERROR=7 # CONFIG_BFIN561_EZKIT is not set # CONFIG_BFIN561_TEPLA is not set CONFIG_BFIN561_BLUETECHNIX_CM=y -# CONFIG_GENERIC_BF561_BOARD is not set # # BF561 Specific Configuration @@ -151,12 +196,7 @@ CONFIG_BFIN561_BLUETECHNIX_CM=y # # Core B Support # - -# -# Core B Support -# CONFIG_BF561_COREB=y -# CONFIG_BF561_COREB_RESET is not set # # Interrupt Priority Assignment @@ -196,14 +236,6 @@ CONFIG_IRQ_DMA2_8=9 CONFIG_IRQ_DMA2_9=9 CONFIG_IRQ_DMA2_10=9 CONFIG_IRQ_DMA2_11=9 -CONFIG_IRQ_TIMER0=10 -CONFIG_IRQ_TIMER1=10 -CONFIG_IRQ_TIMER2=10 -CONFIG_IRQ_TIMER3=10 -CONFIG_IRQ_TIMER4=10 -CONFIG_IRQ_TIMER5=10 -CONFIG_IRQ_TIMER6=10 -CONFIG_IRQ_TIMER7=10 CONFIG_IRQ_TIMER8=10 CONFIG_IRQ_TIMER9=10 CONFIG_IRQ_TIMER10=10 @@ -226,6 +258,7 @@ CONFIG_IRQ_WDTIMER=13 # Board customizations # # CONFIG_CMDLINE_BOOL is not set +CONFIG_BOOT_LOAD=0x1000 # # Clock/PLL Setup @@ -245,19 +278,20 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_TICKSOURCE_GPTMR0 is not set +CONFIG_TICKSOURCE_CORETMR=y # CONFIG_CYCLES_CLOCKSOURCE is not set -# CONFIG_TICK_ONESHOT is not set +# CONFIG_GPTMR0_CLOCKSOURCE is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # -# Memory Setup +# Misc # -CONFIG_MAX_MEM_SIZE=32 -CONFIG_BOOT_LOAD=0x1000 CONFIG_BFIN_SCRATCH_REG_RETN=y # CONFIG_BFIN_SCRATCH_REG_RETE is not set # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set @@ -284,6 +318,12 @@ CONFIG_IP_CHECKSUM_L1=y CONFIG_CACHELINE_ALIGNED_L1=y CONFIG_SYSCALL_TAB_L1=y CONFIG_CPLB_SWITCH_TAB_L1=y +CONFIG_APP_STACK_L1=y + +# +# Speed Optimizations +# +CONFIG_BFIN_INS_LOWOVERHEAD=y CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set CONFIG_SELECT_MEMORY_MODEL=y @@ -292,14 +332,16 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y -CONFIG_LARGE_ALLOCS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 # CONFIG_BFIN_GPTIMERS is not set +# CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y # CONFIG_DMA_UNCACHED_NONE is not set @@ -308,15 +350,16 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y -# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +# CONFIG_BFIN_L2_ICACHEABLE is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_EXTMEM_DCACHEABLE=y -CONFIG_BFIN_EXTMEM_WRITEBACK=y -# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set -# CONFIG_BFIN_L2_ICACHEABLE is not set +# CONFIG_BFIN_EXTMEM_WRITEBACK is not set +CONFIG_BFIN_EXTMEM_WRITETHROUGH=y # CONFIG_BFIN_L2_DCACHEABLE is not set +# CONFIG_BFIN_L2_WRITEBACK is not set +# CONFIG_BFIN_L2_WRITETHROUGH is not set # # Memory Protection Unit @@ -324,7 +367,7 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_MPU is not set # -# Asynchonous Memory Configuration +# Asynchronous Memory Configuration # # @@ -353,8 +396,8 @@ CONFIG_BANK_3=0xFFC2 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # -# CONFIG_PCI is not set # CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set # # Executable file formats @@ -363,18 +406,19 @@ CONFIG_BINFMT_ELF_FDPIC=y CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y CONFIG_BINFMT_SHARED_FLAT=y +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -# CONFIG_PM_WAKEUP_BY_GPIO is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y # -# Networking +# CPU Frequency scaling # +# CONFIG_CPU_FREQ is not set CONFIG_NET=y # @@ -383,10 +427,6 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -407,14 +447,11 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set -CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set @@ -423,6 +460,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -432,24 +470,21 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -460,16 +495,22 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -487,8 +528,10 @@ CONFIG_MTD_BLOCK=y # # RAM/ROM/Flash chip drivers # -# CONFIG_MTD_CFI is not set +CONFIG_MTD_CFI=y # CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y @@ -499,20 +542,29 @@ CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +# CONFIG_MTD_PSD4256G is not set +CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_RAM=y -# CONFIG_MTD_ROM is not set +CONFIG_MTD_ROM=m # CONFIG_MTD_ABSENT is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_UCLINUX=y +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers # +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -528,6 +580,11 @@ CONFIG_MTD_UCLINUX=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -539,14 +596,21 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set -# CONFIG_BFIN_IDE_ADDRESS_MAPPING_MODE0 is not set -# CONFIG_BFIN_IDE_ADDRESS_MAPPING_MODE1 is not set # # SCSI device support @@ -558,26 +622,50 @@ CONFIG_MISC_DEVICES=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -CONFIG_SMC91X=y -# CONFIG_SMSC911X is not set +# CONFIG_SMC91X is not set # CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +CONFIG_SMSC911X=m +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set -# CONFIG_AX88180 is not set # CONFIG_NETDEV_10000 is not set # @@ -585,10 +673,13 @@ CONFIG_SMC91X=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -609,16 +700,15 @@ CONFIG_SMC91X=y # # Character devices # -# CONFIG_AD9960 is not set -# CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PPIFCD is not set +CONFIG_BFIN_DMA_INTERFACE=m +# CONFIG_BFIN_PPI is not set +# CONFIG_BFIN_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set -# CONFIG_BF5xx_PPI is not set +# CONFIG_BFIN_SPI_ADC is not set # CONFIG_BFIN_SPORT is not set -# CONFIG_BFIN_TIMER_LATENCY is not set -# CONFIG_SIMPLE_GPIO is not set # CONFIG_VT is not set # CONFIG_DEVKMEM is not set +# CONFIG_BFIN_JTAG_COMM is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -629,6 +719,7 @@ CONFIG_SMC91X=y # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y CONFIG_SERIAL_BFIN_DMA=y @@ -639,6 +730,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # @@ -647,54 +739,100 @@ CONFIG_UNIX98_PTYS=y # CONFIG_CAN4LINUX is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BFIN=y +# CONFIG_SPI_BFIN_LOCK is not set +# CONFIG_SPI_BFIN_SPORT is not set +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y # -# SPI support +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -709,42 +847,85 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set # CONFIG_USB is not set - -# -# Enable Host or Gadget support to see Inventra options -# - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set -# CONFIG_MMC is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +CONFIG_USB_GADGET_NET2272=y +CONFIG_USB_NET2272=m +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_USB_G_PRINTER=m +# CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_SPI=m +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set - -# -# PBX support -# -# CONFIG_PBX is not set +# CONFIG_STAGING is not set # # File systems @@ -754,25 +935,29 @@ CONFIG_EXT2_FS_XATTR=y # CONFIG_EXT2_FS_POSIX_ACL is not set # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +# CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -781,8 +966,11 @@ CONFIG_INOTIFY_USER=y # # DOS/FAT/NT Filesystems # -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # @@ -794,10 +982,7 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -805,14 +990,28 @@ CONFIG_SYSFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_YAFFS_FS is not set -# CONFIG_JFFS2_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set @@ -827,11 +1026,47 @@ CONFIG_NETWORK_FILESYSTEMS=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set # # Kernel hacking @@ -839,14 +1074,40 @@ CONFIG_INSTRUMENTATION=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_SECTION_MISMATCH=y # CONFIG_DEBUG_KERNEL is not set -CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_DEBUG_VERBOSE=y CONFIG_DEBUG_MMRS=y +# CONFIG_DEBUG_DOUBLEFAULT is not set CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y @@ -855,33 +1116,40 @@ CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set -# CONFIG_EARLY_PRINTK is not set -# CONFIG_DUAL_CORE_TEST_MODULE is not set +CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y +# CONFIG_BFIN_ISRAM_SELF_TEST is not set # # Security options # # CONFIG_KEYS is not set CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set -CONFIG_SECURITY_CAPABILITIES=y +# CONFIG_SECURITY_PATH is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_SECURITY_TOMOYO is not set # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC_T10DIF is not set +CONFIG_CRC_ITU_T=y CONFIG_CRC32=y -# CONFIG_CRC7 is not set +CONFIG_CRC7=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig index a6a7c8e..bc7fae3 100644 --- a/arch/blackfin/configs/H8606_defconfig +++ b/arch/blackfin/configs/H8606_defconfig @@ -67,6 +67,7 @@ CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 @@ -249,6 +250,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_LARGE_ALLOCS=y +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 CONFIG_BFIN_GPTIMERS=y # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig index 1ec9ae2..a7e49d6 100644 --- a/arch/blackfin/configs/IP0X_defconfig +++ b/arch/blackfin/configs/IP0X_defconfig @@ -68,6 +68,7 @@ CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 @@ -261,6 +262,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_LARGE_ALLOCS=y +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 # CONFIG_BFIN_GPTIMERS is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig index ff377fa..67d1276 100644 --- a/arch/blackfin/configs/PNAV-10_defconfig +++ b/arch/blackfin/configs/PNAV-10_defconfig @@ -63,6 +63,7 @@ CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y @@ -285,6 +286,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 CONFIG_BFIN_GPTIMERS=y # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig index 814f9ca..52bfa6b 100644 --- a/arch/blackfin/configs/SRV1_defconfig +++ b/arch/blackfin/configs/SRV1_defconfig @@ -72,6 +72,7 @@ CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 @@ -271,6 +272,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_LARGE_ALLOCS=y +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 CONFIG_DMA_UNCACHED_2M=y # CONFIG_DMA_UNCACHED_1M is not set # CONFIG_DMA_UNCACHED_NONE is not set @@ -700,7 +702,7 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_YEALINK is not set CONFIG_INPUT_UINPUT=y # CONFIG_BF53X_PFBUTTONS is not set -# CONFIG_TWI_KEYPAD is not set +# CONFIG_INPUT_PCF8574 is not set # # Hardware I/O ports diff --git a/arch/blackfin/configs/TCM-BF537_defconfig b/arch/blackfin/configs/TCM-BF537_defconfig index 375e75a..60adfad 100644 --- a/arch/blackfin/configs/TCM-BF537_defconfig +++ b/arch/blackfin/configs/TCM-BF537_defconfig @@ -1,13 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc2 -# Tue Jan 6 09:22:17 2009 +# Linux kernel version: 2.6.30.5 # # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y +CONFIG_GENERIC_BUG=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y @@ -16,6 +16,9 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -26,49 +29,72 @@ CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +# CONFIG_KERNEL_GZIP is not set +# CONFIG_KERNEL_BZIP2 is not set +CONFIG_KERNEL_LZMA=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set -# CONFIG_BLK_DEV_INITRD is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_RD_GZIP is not set +# CONFIG_RD_BZIP2 is not set +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -# CONFIG_SYSCTL is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_UID16 is not set # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_HOTPLUG is not set +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y # CONFIG_AIO is not set CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -76,11 +102,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -96,7 +119,6 @@ CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -128,10 +150,15 @@ CONFIG_BF537=y # CONFIG_BF538 is not set # CONFIG_BF539 is not set # CONFIG_BF542 is not set +# CONFIG_BF542M is not set # CONFIG_BF544 is not set +# CONFIG_BF544M is not set # CONFIG_BF547 is not set +# CONFIG_BF547M is not set # CONFIG_BF548 is not set +# CONFIG_BF548M is not set # CONFIG_BF549 is not set +# CONFIG_BF549M is not set # CONFIG_BF561 is not set CONFIG_BF_REV_MIN=2 CONFIG_BF_REV_MAX=3 @@ -173,11 +200,11 @@ CONFIG_IRQ_MEM_DMA1=13 CONFIG_IRQ_WATCH=13 CONFIG_IRQ_SPI=10 # CONFIG_BFIN537_STAMP is not set -# CONFIG_BFIN537_BLUETECHNIX_CM is not set +# CONFIG_BFIN537_BLUETECHNIX_CM_E is not set +# CONFIG_BFIN537_BLUETECHNIX_CM_U is not set CONFIG_BFIN537_BLUETECHNIX_TCM=y # CONFIG_PNAV10 is not set # CONFIG_CAMSIG_MINOTAUR is not set -# CONFIG_GENERIC_BF537_BOARD is not set # # BF537 Specific Configuration @@ -223,7 +250,10 @@ CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_TICKSOURCE_GPTMR0 is not set +CONFIG_TICKSOURCE_CORETMR=y # CONFIG_CYCLES_CLOCKSOURCE is not set +# CONFIG_GPTMR0_CLOCKSOURCE is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -273,10 +303,12 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 # CONFIG_BFIN_GPTIMERS is not set # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set @@ -287,10 +319,9 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y -# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_EXTMEM_DCACHEABLE=y CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set @@ -301,7 +332,7 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_MPU is not set # -# Asynchonous Memory Configuration +# Asynchronous Memory Configuration # # @@ -327,6 +358,7 @@ CONFIG_BANK_3=0xFFC2 # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # # CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set # # Executable file formats @@ -343,13 +375,83 @@ CONFIG_BINFMT_SHARED_FLAT=y # # CONFIG_PM is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y -# CONFIG_PM_WAKEUP_BY_GPIO is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set -# CONFIG_NET is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_LRO=y +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -358,15 +460,21 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AR7_PARTS is not set # @@ -402,9 +510,10 @@ CONFIG_MTD_CFI_I2=y CONFIG_MTD_CFI_INTELEXT=y # CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set +# CONFIG_MTD_PSD4256G is not set CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_RAM=y -# CONFIG_MTD_ROM is not set +CONFIG_MTD_ROM=m # CONFIG_MTD_ABSENT is not set # @@ -413,7 +522,7 @@ CONFIG_MTD_RAM=y CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set CONFIG_MTD_GPIO_ADDR=y -CONFIG_MTD_UCLINUX=y +# CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set # @@ -436,6 +545,11 @@ CONFIG_MTD_UCLINUX=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -443,15 +557,23 @@ CONFIG_MTD_UCLINUX=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -464,6 +586,74 @@ CONFIG_HAVE_IDE=y # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set # CONFIG_MD is not set +CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_BFIN_MAC=y +CONFIG_BFIN_MAC_USE_L1=y +CONFIG_BFIN_TX_DESC_NUM=10 +CONFIG_BFIN_RX_DESC_NUM=20 +# CONFIG_BFIN_MAC_RMII is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set # CONFIG_PHONE is not set # @@ -480,15 +670,12 @@ CONFIG_HAVE_IDE=y # # Character devices # -# CONFIG_AD9960 is not set -# CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PPIFCD is not set +CONFIG_BFIN_DMA_INTERFACE=m +# CONFIG_BFIN_PPI is not set +# CONFIG_BFIN_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set -# CONFIG_BF5xx_PPI is not set +# CONFIG_BFIN_SPI_ADC is not set CONFIG_BFIN_SPORT=y -# CONFIG_BFIN_TIMER_LATENCY is not set -CONFIG_BFIN_DMA_INTERFACE=m -# CONFIG_SIMPLE_GPIO is not set # CONFIG_VT is not set # CONFIG_DEVKMEM is not set # CONFIG_BFIN_JTAG_COMM is not set @@ -502,6 +689,7 @@ CONFIG_BFIN_DMA_INTERFACE=m # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y CONFIG_SERIAL_BFIN_DMA=y @@ -514,6 +702,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # @@ -534,39 +723,17 @@ CONFIG_SPI_MASTER=y # CONFIG_SPI_BFIN=y # CONFIG_SPI_BFIN_LOCK is not set +# CONFIG_SPI_BFIN_SPORT is not set # CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -CONFIG_GPIOLIB=y -# CONFIG_DEBUG_GPIO is not set -CONFIG_GPIO_SYSFS=y - -# -# Memory mapped GPIO expanders: -# - -# -# I2C GPIO expanders: -# -# CONFIG_GPIO_MAX732X is not set -# CONFIG_GPIO_PCA953X is not set -# CONFIG_GPIO_PCF857X is not set - -# -# PCI GPIO expanders: -# - -# -# SPI GPIO expanders: -# -# CONFIG_GPIO_MAX7301 is not set -# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -580,6 +747,12 @@ CONFIG_WATCHDOG=y # # CONFIG_SOFT_WATCHDOG is not set CONFIG_BFIN_WDT=y +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set # # Multifunction device drivers @@ -588,7 +761,7 @@ CONFIG_BFIN_WDT=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -598,6 +771,7 @@ CONFIG_BFIN_WDT=y # Multimedia core support # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set # CONFIG_VIDEO_MEDIA is not set # @@ -618,13 +792,81 @@ CONFIG_BFIN_WDT=y # # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +CONFIG_USB_GADGET_NET2272=y +CONFIG_USB_NET2272=y +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_SPI=m # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -641,8 +883,10 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -652,6 +896,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -660,8 +909,11 @@ CONFIG_INOTIFY_USER=y # # DOS/FAT/NT Filesystems # -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # @@ -673,10 +925,7 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -684,9 +933,19 @@ CONFIG_SYSFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_YAFFS_FS is not set -# CONFIG_JFFS2_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -695,13 +954,62 @@ CONFIG_SYSFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set # # Kernel hacking @@ -714,12 +1022,30 @@ CONFIG_FRAME_WARN=1024 # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_SECTION_MISMATCH=y # CONFIG_DEBUG_KERNEL is not set -CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_SYSCTL_SYSCALL_CHECK is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_DEBUG_VERBOSE=y @@ -733,9 +1059,10 @@ CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set -# CONFIG_EARLY_PRINTK is not set +CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y +# CONFIG_BFIN_ISRAM_SELF_TEST is not set # # Security options @@ -744,20 +1071,110 @@ CONFIG_ACCESS_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines # +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set -# CONFIG_CRC_ITU_T is not set -# CONFIG_CRC32 is not set -# CONFIG_CRC7 is not set +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +CONFIG_CRC7=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/blackfin/include/asm/bfin-global.h b/arch/blackfin/include/asm/bfin-global.h index 10064f9..e6485c3 100644 --- a/arch/blackfin/include/asm/bfin-global.h +++ b/arch/blackfin/include/asm/bfin-global.h @@ -11,9 +11,6 @@ #ifndef __ASSEMBLY__ -#include <asm/sections.h> -#include <asm/ptrace.h> -#include <asm/user.h> #include <linux/linkage.h> #include <linux/types.h> @@ -23,6 +20,12 @@ # define DMA_UNCACHED_REGION (2 * 1024 * 1024) #elif defined(CONFIG_DMA_UNCACHED_1M) # define DMA_UNCACHED_REGION (1024 * 1024) +#elif defined(CONFIG_DMA_UNCACHED_512K) +# define DMA_UNCACHED_REGION (512 * 1024) +#elif defined(CONFIG_DMA_UNCACHED_256K) +# define DMA_UNCACHED_REGION (256 * 1024) +#elif defined(CONFIG_DMA_UNCACHED_128K) +# define DMA_UNCACHED_REGION (128 * 1024) #else # define DMA_UNCACHED_REGION (0) #endif @@ -35,6 +38,7 @@ extern unsigned long get_sclk(void); extern unsigned long sclk_to_usecs(unsigned long sclk); extern unsigned long usecs_to_sclk(unsigned long usecs); +struct pt_regs; extern void dump_bfin_process(struct pt_regs *regs); extern void dump_bfin_mem(struct pt_regs *regs); extern void dump_bfin_trace_buffer(void); diff --git a/arch/blackfin/include/asm/bug.h b/arch/blackfin/include/asm/bug.h index 6f4548a..75f6dc3 100644 --- a/arch/blackfin/include/asm/bug.h +++ b/arch/blackfin/include/asm/bug.h @@ -47,7 +47,7 @@ #define BUG() \ do { \ _BUG_OR_WARN(0); \ - for (;;); \ + unreachable(); \ } while (0) #define WARN_ON(condition) \ diff --git a/arch/blackfin/include/asm/cacheflush.h b/arch/blackfin/include/asm/cacheflush.h index 417eaac..2666ff8 100644 --- a/arch/blackfin/include/asm/cacheflush.h +++ b/arch/blackfin/include/asm/cacheflush.h @@ -10,6 +10,7 @@ #define _BLACKFIN_CACHEFLUSH_H #include <asm/blackfin.h> /* for SSYNC() */ +#include <asm/sections.h> /* for _ramend */ extern void blackfin_icache_flush_range(unsigned long start_address, unsigned long end_address); extern void blackfin_dcache_flush_range(unsigned long start_address, unsigned long end_address); diff --git a/arch/blackfin/include/asm/checksum.h b/arch/blackfin/include/asm/checksum.h index a23415b..623cc7f 100644 --- a/arch/blackfin/include/asm/checksum.h +++ b/arch/blackfin/include/asm/checksum.h @@ -9,63 +9,12 @@ #define _BFIN_CHECKSUM_H /* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -__wsum csum_partial(const void *buff, int len, __wsum sum); - -/* - * the same as csum_partial, but copies from src while it - * checksums - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ - -__wsum csum_partial_copy(const void *src, void *dst, - int len, __wsum sum); - -/* - * the same as csum_partial_copy, but copies from user space. - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ - -extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst, - int len, __wsum sum, int *csum_err); - -#define csum_partial_copy_nocheck(src, dst, len, sum) \ - csum_partial_copy((src), (dst), (len), (sum)) - -__sum16 ip_fast_csum(unsigned char *iph, unsigned int ihl); - -/* - * Fold a partial checksum - */ - -static inline __sum16 csum_fold(__wsum sum) -{ - while (sum >> 16) - sum = (sum & 0xffff) + (sum >> 16); - return ((~(sum << 16)) >> 16); -} - -/* * computes the checksum of the TCP/UDP pseudo-header * returns a 16-bit checksum, already complemented */ static inline __wsum -csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, +__csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, unsigned short proto, __wsum sum) { unsigned int carry; @@ -88,19 +37,8 @@ csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, return (sum); } +#define csum_tcpudp_nofold __csum_tcpudp_nofold -static inline __sum16 -csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len, - unsigned short proto, __wsum sum) -{ - return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum)); -} - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ - -extern __sum16 ip_compute_csum(const void *buff, int len); +#include <asm-generic/checksum.h> -#endif /* _BFIN_CHECKSUM_H */ +#endif diff --git a/arch/blackfin/include/asm/clocks.h b/arch/blackfin/include/asm/clocks.h index f80dad5..6f0b618 100644 --- a/arch/blackfin/include/asm/clocks.h +++ b/arch/blackfin/include/asm/clocks.h @@ -9,6 +9,8 @@ #ifndef _BFIN_CLOCKS_H #define _BFIN_CLOCKS_H +#include <asm/dpmc.h> + #ifdef CONFIG_CCLK_DIV_1 # define CONFIG_CCLK_ACT_DIV CCLK_DIV1 # define CONFIG_CCLK_DIV 1 diff --git a/arch/blackfin/include/asm/dma-mapping.h b/arch/blackfin/include/asm/dma-mapping.h index 7a23d82..f9172ff 100644 --- a/arch/blackfin/include/asm/dma-mapping.h +++ b/arch/blackfin/include/asm/dma-mapping.h @@ -7,9 +7,9 @@ #ifndef _BLACKFIN_DMA_MAPPING_H #define _BLACKFIN_DMA_MAPPING_H -#include <asm/scatterlist.h> +#include <asm/cacheflush.h> +struct scatterlist; -void dma_alloc_init(unsigned long start, unsigned long end); void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t gfp); void dma_free_coherent(struct device *dev, size_t size, void *vaddr, @@ -20,13 +20,51 @@ void dma_free_coherent(struct device *dev, size_t size, void *vaddr, */ #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) +#define dma_supported(d, m) (1) +#define dma_get_cache_alignment() (32) +#define dma_is_consistent(d, h) (1) -static inline -int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) +static inline int +dma_set_mask(struct device *dev, u64 dma_mask) { + if (!dev->dma_mask || !dma_supported(dev, dma_mask)) + return -EIO; + + *dev->dma_mask = dma_mask; + return 0; } +static inline int +dma_mapping_error(struct device *dev, dma_addr_t dma_addr) +{ + return 0; +} + +extern void +__dma_sync(dma_addr_t addr, size_t size, enum dma_data_direction dir); +static inline void +_dma_sync(dma_addr_t addr, size_t size, enum dma_data_direction dir) +{ + if (!__builtin_constant_p(dir)) { + __dma_sync(addr, size, dir); + return; + } + + switch (dir) { + case DMA_NONE: + BUG(); + case DMA_TO_DEVICE: /* writeback only */ + flush_dcache_range(addr, addr + size); + break; + case DMA_FROM_DEVICE: /* invalidate only */ + case DMA_BIDIRECTIONAL: /* flush and invalidate */ + /* Blackfin has no dedicated invalidate (it includes a flush) */ + invalidate_dcache_range(addr, addr + size); + break; + } +} + /* * Map a single buffer of the indicated size for DMA in streaming mode. * The 32-bit bus address to use is returned. @@ -34,8 +72,13 @@ int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) * Once the device is given the dma address, the device owns this memory * until either pci_unmap_single or pci_dma_sync_single is performed. */ -extern dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, - enum dma_data_direction direction); +static inline dma_addr_t +dma_map_single(struct device *dev, void *ptr, size_t size, + enum dma_data_direction dir) +{ + _dma_sync((dma_addr_t)ptr, size, dir); + return (dma_addr_t) ptr; +} static inline dma_addr_t dma_map_page(struct device *dev, struct page *page, @@ -53,8 +96,12 @@ dma_map_page(struct device *dev, struct page *page, * After this call, reads by the cpu to the buffer are guarenteed to see * whatever the device wrote there. */ -extern void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, - enum dma_data_direction direction); +static inline void +dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, + enum dma_data_direction dir) +{ + BUG_ON(!valid_dma_direction(dir)); +} static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size, @@ -80,38 +127,66 @@ dma_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size, * the same here. */ extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction direction); + enum dma_data_direction dir); /* * Unmap a set of streaming mode DMA translations. * Again, cpu read rules concerning calls here are the same as for * pci_unmap_single() above. */ -extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg, - int nhwentries, enum dma_data_direction direction); +static inline void +dma_unmap_sg(struct device *dev, struct scatterlist *sg, + int nhwentries, enum dma_data_direction dir) +{ + BUG_ON(!valid_dma_direction(dir)); +} -static inline void dma_sync_single_for_cpu(struct device *dev, - dma_addr_t handle, size_t size, - enum dma_data_direction dir) +static inline void +dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t handle, + unsigned long offset, size_t size, + enum dma_data_direction dir) { + BUG_ON(!valid_dma_direction(dir)); } -static inline void dma_sync_single_for_device(struct device *dev, - dma_addr_t handle, size_t size, - enum dma_data_direction dir) +static inline void +dma_sync_single_range_for_device(struct device *dev, dma_addr_t handle, + unsigned long offset, size_t size, + enum dma_data_direction dir) { + _dma_sync(handle + offset, size, dir); } -static inline void dma_sync_sg_for_cpu(struct device *dev, - struct scatterlist *sg, - int nents, enum dma_data_direction dir) +static inline void +dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size, + enum dma_data_direction dir) { + dma_sync_single_range_for_cpu(dev, handle, 0, size, dir); } -static inline void dma_sync_sg_for_device(struct device *dev, - struct scatterlist *sg, - int nents, enum dma_data_direction dir) +static inline void +dma_sync_single_for_device(struct device *dev, dma_addr_t handle, size_t size, + enum dma_data_direction dir) +{ + dma_sync_single_range_for_device(dev, handle, 0, size, dir); +} + +static inline void +dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents, + enum dma_data_direction dir) +{ + BUG_ON(!valid_dma_direction(dir)); +} + +extern void +dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction dir); + +static inline void +dma_cache_sync(struct device *dev, void *vaddr, size_t size, + enum dma_data_direction dir) { + _dma_sync((dma_addr_t)vaddr, size, dir); } #endif /* _BLACKFIN_DMA_MAPPING_H */ diff --git a/arch/blackfin/include/asm/dma.h b/arch/blackfin/include/asm/dma.h index c9a5962..bd2e622 100644 --- a/arch/blackfin/include/asm/dma.h +++ b/arch/blackfin/include/asm/dma.h @@ -10,46 +10,70 @@ #include <linux/interrupt.h> #include <mach/dma.h> +#include <asm/atomic.h> #include <asm/blackfin.h> #include <asm/page.h> - -#define MAX_DMA_ADDRESS PAGE_OFFSET - -/***************************************************************************** -* Generic DMA Declarations -* -****************************************************************************/ -enum dma_chan_status { - DMA_CHANNEL_FREE, - DMA_CHANNEL_REQUESTED, - DMA_CHANNEL_ENABLED, -}; +#include <asm-generic/dma.h> + +/* DMA_CONFIG Masks */ +#define DMAEN 0x0001 /* DMA Channel Enable */ +#define WNR 0x0002 /* Channel Direction (W/R*) */ +#define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */ +#define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */ +#define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */ +#define DMA2D 0x0010 /* DMA Mode (2D/1D*) */ +#define RESTART 0x0020 /* DMA Buffer Clear */ +#define DI_SEL 0x0040 /* Data Interrupt Timing Select */ +#define DI_EN 0x0080 /* Data Interrupt Enable */ +#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ +#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ +#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ +#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ +#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ +#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ +#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ +#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ +#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ +#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ +#define NDSIZE 0x0f00 /* Next Descriptor Size */ +#define DMAFLOW 0x7000 /* Flow Control */ +#define DMAFLOW_STOP 0x0000 /* Stop Mode */ +#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ +#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ +#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ +#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ + +/* DMA_IRQ_STATUS Masks */ +#define DMA_DONE 0x0001 /* DMA Completion Interrupt Status */ +#define DMA_ERR 0x0002 /* DMA Error Interrupt Status */ +#define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */ +#define DMA_RUN 0x0008 /* DMA Channel Running Indicator */ /*------------------------- * config reg bits value *-------------------------*/ -#define DATA_SIZE_8 0 -#define DATA_SIZE_16 1 -#define DATA_SIZE_32 2 +#define DATA_SIZE_8 0 +#define DATA_SIZE_16 1 +#define DATA_SIZE_32 2 -#define DMA_FLOW_STOP 0 -#define DMA_FLOW_AUTO 1 -#define DMA_FLOW_ARRAY 4 -#define DMA_FLOW_SMALL 6 -#define DMA_FLOW_LARGE 7 +#define DMA_FLOW_STOP 0 +#define DMA_FLOW_AUTO 1 +#define DMA_FLOW_ARRAY 4 +#define DMA_FLOW_SMALL 6 +#define DMA_FLOW_LARGE 7 -#define DIMENSION_LINEAR 0 -#define DIMENSION_2D 1 +#define DIMENSION_LINEAR 0 +#define DIMENSION_2D 1 -#define DIR_READ 0 -#define DIR_WRITE 1 +#define DIR_READ 0 +#define DIR_WRITE 1 -#define INTR_DISABLE 0 -#define INTR_ON_BUF 2 -#define INTR_ON_ROW 3 +#define INTR_DISABLE 0 +#define INTR_ON_BUF 2 +#define INTR_ON_ROW 3 #define DMA_NOSYNC_KEEP_DMA_BUF 0 -#define DMA_SYNC_RESTART 1 +#define DMA_SYNC_RESTART 1 struct dmasg { void *next_desc_addr; @@ -104,11 +128,9 @@ struct dma_register { }; -struct mutex; struct dma_channel { - struct mutex dmalock; const char *device_id; - enum dma_chan_status chan_status; + atomic_t chan_status; volatile struct dma_register *regs; struct dmasg *sg; /* large mode descriptor */ unsigned int irq; @@ -220,27 +242,20 @@ static inline void set_dma_sg(unsigned int channel, struct dmasg *sg, int ndsize static inline int dma_channel_active(unsigned int channel) { - if (dma_ch[channel].chan_status == DMA_CHANNEL_FREE) - return 0; - else - return 1; + return atomic_read(&dma_ch[channel].chan_status); } static inline void disable_dma(unsigned int channel) { dma_ch[channel].regs->cfg &= ~DMAEN; SSYNC(); - dma_ch[channel].chan_status = DMA_CHANNEL_REQUESTED; } static inline void enable_dma(unsigned int channel) { dma_ch[channel].regs->curr_x_count = 0; dma_ch[channel].regs->curr_y_count = 0; dma_ch[channel].regs->cfg |= DMAEN; - dma_ch[channel].chan_status = DMA_CHANNEL_ENABLED; } -void free_dma(unsigned int channel); -int request_dma(unsigned int channel, const char *device_id); int set_dma_callback(unsigned int channel, irq_handler_t callback, void *data); static inline void dma_disable_irq(unsigned int channel) diff --git a/arch/blackfin/include/asm/dpmc.h b/arch/blackfin/include/asm/dpmc.h index 925e66c..1597ae5 100644 --- a/arch/blackfin/include/asm/dpmc.h +++ b/arch/blackfin/include/asm/dpmc.h @@ -1,7 +1,7 @@ /* * Miscellaneous IOCTL commands for Dynamic Power Management Controller Driver * - * Copyright (C) 2004-2008 Analog Device Inc. + * Copyright (C) 2004-2009 Analog Device Inc. * * Licensed under the GPL-2 */ @@ -9,7 +9,109 @@ #ifndef _BLACKFIN_DPMC_H_ #define _BLACKFIN_DPMC_H_ -#ifdef __KERNEL__ +/* PLL_CTL Masks */ +#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */ +#define PLL_OFF 0x0002 /* PLL Not Powered */ +#define STOPCK 0x0008 /* Core Clock Off */ +#define PDWN 0x0020 /* Enter Deep Sleep Mode */ +#ifdef __ADSPBF539__ +# define IN_DELAY 0x0014 /* Add 200ps Delay To EBIU Input Latches */ +# define OUT_DELAY 0x00C0 /* Add 200ps Delay To EBIU Output Signals */ +#else +# define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */ +# define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */ +#endif +#define BYPASS 0x0100 /* Bypass the PLL */ +#define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */ +#define SPORT_HYST 0x8000 /* Enable Additional Hysteresis on SPORT Input Pins */ +#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */ + +/* PLL_DIV Masks */ +#define SSEL 0x000F /* System Select */ +#define CSEL 0x0030 /* Core Select */ +#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */ +#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */ +#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */ +#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */ + +#define CCLK_DIV1 CSEL_DIV1 +#define CCLK_DIV2 CSEL_DIV2 +#define CCLK_DIV4 CSEL_DIV4 +#define CCLK_DIV8 CSEL_DIV8 + +#define SET_SSEL(x) ((x) & 0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */ +#define SCLK_DIV(x) (x) /* SCLK = VCO / x */ + +/* PLL_STAT Masks */ +#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ +#define FULL_ON 0x0002 /* Processor In Full On Mode */ +#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */ +#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ + +#define RTCWS 0x0400 /* RTC/Reset Wake-Up Status */ +#define CANWS 0x0800 /* CAN Wake-Up Status */ +#define USBWS 0x2000 /* USB Wake-Up Status */ +#define KPADWS 0x4000 /* Keypad Wake-Up Status */ +#define ROTWS 0x8000 /* Rotary Wake-Up Status */ +#define GPWS 0x1000 /* General-Purpose Wake-Up Status */ + +/* VR_CTL Masks */ +#if defined(__ADSPBF52x__) || defined(__ADSPBF51x__) +#define FREQ 0x3000 /* Switching Oscillator Frequency For Regulator */ +#define FREQ_1000 0x3000 /* Switching Frequency Is 1 MHz */ +#else +#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */ +#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */ +#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */ +#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */ +#endif +#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */ + +#define GAIN 0x000C /* Voltage Level Gain */ +#define GAIN_5 0x0000 /* GAIN = 5 */ +#define GAIN_10 0x0004 /* GAIN = 1 */ +#define GAIN_20 0x0008 /* GAIN = 2 */ +#define GAIN_50 0x000C /* GAIN = 5 */ + +#define VLEV 0x00F0 /* Internal Voltage Level */ +#ifdef __ADSPBF52x__ +#define VLEV_085 0x0040 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ +#define VLEV_090 0x0050 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ +#define VLEV_095 0x0060 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ +#define VLEV_100 0x0070 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ +#define VLEV_105 0x0080 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ +#define VLEV_110 0x0090 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ +#define VLEV_115 0x00A0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ +#define VLEV_120 0x00B0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ +#else +#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ +#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ +#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ +#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ +#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ +#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ +#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ +#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ +#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */ +#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ +#endif + +#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ +#define CANWE 0x0200 /* Enable CAN Wakeup From Hibernate */ +#define PHYWE 0x0400 /* Enable PHY Wakeup From Hibernate */ +#define GPWE 0x0400 /* General-Purpose Wake-Up Enable */ +#define MXVRWE 0x0400 /* Enable MXVR Wakeup From Hibernate */ +#define KPADWE 0x1000 /* Keypad Wake-Up Enable */ +#define ROTWE 0x2000 /* Rotary Wake-Up Enable */ +#define CLKBUFOE 0x4000 /* CLKIN Buffer Output Enable */ +#define SCKELOW 0x8000 /* Do Not Drive SCKE High During Reset After Hibernate */ + +#if defined(__ADSPBF52x__) || defined(__ADSPBF51x__) +#define USBWE 0x0200 /* Enable USB Wakeup From Hibernate */ +#else +#define USBWE 0x0800 /* Enable USB Wakeup From Hibernate */ +#endif + #ifndef __ASSEMBLY__ void sleep_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2); @@ -54,6 +156,5 @@ struct bfin_dpmc_platform_data { w[P0 + (x - PLL_CTL)] = R0;\ #endif -#endif /* __KERNEL__ */ #endif /*_BLACKFIN_DPMC_H_*/ diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h index 5b44d05..539468a 100644 --- a/arch/blackfin/include/asm/gpio.h +++ b/arch/blackfin/include/asm/gpio.h @@ -159,6 +159,11 @@ struct gpio_port_t { }; #endif +#ifdef BFIN_SPECIAL_GPIO_BANKS +void bfin_special_gpio_free(unsigned gpio); +int bfin_special_gpio_request(unsigned gpio, const char *label); +#endif + #ifdef CONFIG_PM unsigned int bfin_pm_standby_setup(void); diff --git a/arch/blackfin/include/asm/gptimers.h b/arch/blackfin/include/asm/gptimers.h index 89f08de..c722acd 100644 --- a/arch/blackfin/include/asm/gptimers.h +++ b/arch/blackfin/include/asm/gptimers.h @@ -172,25 +172,25 @@ /* The actual gptimer API */ -void set_gptimer_pwidth(int timer_id, uint32_t width); -uint32_t get_gptimer_pwidth(int timer_id); -void set_gptimer_period(int timer_id, uint32_t period); -uint32_t get_gptimer_period(int timer_id); -uint32_t get_gptimer_count(int timer_id); -int get_gptimer_intr(int timer_id); -void clear_gptimer_intr(int timer_id); -int get_gptimer_over(int timer_id); -void clear_gptimer_over(int timer_id); -void set_gptimer_config(int timer_id, uint16_t config); -uint16_t get_gptimer_config(int timer_id); -int get_gptimer_run(int timer_id); -void set_gptimer_pulse_hi(int timer_id); -void clear_gptimer_pulse_hi(int timer_id); +void set_gptimer_pwidth(unsigned int timer_id, uint32_t width); +uint32_t get_gptimer_pwidth(unsigned int timer_id); +void set_gptimer_period(unsigned int timer_id, uint32_t period); +uint32_t get_gptimer_period(unsigned int timer_id); +uint32_t get_gptimer_count(unsigned int timer_id); +int get_gptimer_intr(unsigned int timer_id); +void clear_gptimer_intr(unsigned int timer_id); +int get_gptimer_over(unsigned int timer_id); +void clear_gptimer_over(unsigned int timer_id); +void set_gptimer_config(unsigned int timer_id, uint16_t config); +uint16_t get_gptimer_config(unsigned int timer_id); +int get_gptimer_run(unsigned int timer_id); +void set_gptimer_pulse_hi(unsigned int timer_id); +void clear_gptimer_pulse_hi(unsigned int timer_id); void enable_gptimers(uint16_t mask); void disable_gptimers(uint16_t mask); void disable_gptimers_sync(uint16_t mask); uint16_t get_enabled_gptimers(void); -uint32_t get_gptimer_status(int group); -void set_gptimer_status(int group, uint32_t value); +uint32_t get_gptimer_status(unsigned int group); +void set_gptimer_status(unsigned int group, uint32_t value); #endif diff --git a/arch/blackfin/include/asm/io.h b/arch/blackfin/include/asm/io.h index d1f5029..29e55b9 100644 --- a/arch/blackfin/include/asm/io.h +++ b/arch/blackfin/include/asm/io.h @@ -31,12 +31,14 @@ static inline unsigned char readb(const volatile void __iomem *addr) unsigned int val; int tmp; - __asm__ __volatile__ ("cli %1;\n\t" - "NOP; NOP; SSYNC;\n\t" - "%0 = b [%2] (z);\n\t" - "sti %1;\n\t" - : "=d"(val), "=d"(tmp): "a"(addr) - ); + __asm__ __volatile__ ( + "cli %1;" + "NOP; NOP; SSYNC;" + "%0 = b [%2] (z);" + "sti %1;" + : "=d"(val), "=d"(tmp) + : "a"(addr) + ); return (unsigned char) val; } @@ -46,12 +48,14 @@ static inline unsigned short readw(const volatile void __iomem *addr) unsigned int val; int tmp; - __asm__ __volatile__ ("cli %1;\n\t" - "NOP; NOP; SSYNC;\n\t" - "%0 = w [%2] (z);\n\t" - "sti %1;\n\t" - : "=d"(val), "=d"(tmp): "a"(addr) - ); + __asm__ __volatile__ ( + "cli %1;" + "NOP; NOP; SSYNC;" + "%0 = w [%2] (z);" + "sti %1;" + : "=d"(val), "=d"(tmp) + : "a"(addr) + ); return (unsigned short) val; } @@ -61,20 +65,23 @@ static inline unsigned int readl(const volatile void __iomem *addr) unsigned int val; int tmp; - __asm__ __volatile__ ("cli %1;\n\t" - "NOP; NOP; SSYNC;\n\t" - "%0 = [%2];\n\t" - "sti %1;\n\t" - : "=d"(val), "=d"(tmp): "a"(addr) - ); + __asm__ __volatile__ ( + "cli %1;" + "NOP; NOP; SSYNC;" + "%0 = [%2];" + "sti %1;" + : "=d"(val), "=d"(tmp) + : "a"(addr) + ); + return val; } #endif /* __ASSEMBLY__ */ -#define writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b)) -#define writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b)) -#define writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b)) +#define writeb(b, addr) (void)((*(volatile unsigned char *) (addr)) = (b)) +#define writew(b, addr) (void)((*(volatile unsigned short *) (addr)) = (b)) +#define writel(b, addr) (void)((*(volatile unsigned int *) (addr)) = (b)) #define __raw_readb readb #define __raw_readw readw @@ -82,9 +89,9 @@ static inline unsigned int readl(const volatile void __iomem *addr) #define __raw_writeb writeb #define __raw_writew writew #define __raw_writel writel -#define memset_io(a,b,c) memset((void *)(a),(b),(c)) -#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) -#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) +#define memset_io(a, b, c) memset((void *)(a), (b), (c)) +#define memcpy_fromio(a, b, c) memcpy((a), (void *)(b), (c)) +#define memcpy_toio(a, b, c) memcpy((void *)(a), (b), (c)) /* Convert "I/O port addresses" to actual addresses. i.e. ugly casts. */ #define __io(port) ((void *)(unsigned long)(port)) @@ -92,30 +99,30 @@ static inline unsigned int readl(const volatile void __iomem *addr) #define inb(port) readb(__io(port)) #define inw(port) readw(__io(port)) #define inl(port) readl(__io(port)) -#define outb(x,port) writeb(x,__io(port)) -#define outw(x,port) writew(x,__io(port)) -#define outl(x,port) writel(x,__io(port)) +#define outb(x, port) writeb(x, __io(port)) +#define outw(x, port) writew(x, __io(port)) +#define outl(x, port) writel(x, __io(port)) #define inb_p(port) inb(__io(port)) #define inw_p(port) inw(__io(port)) #define inl_p(port) inl(__io(port)) -#define outb_p(x,port) outb(x,__io(port)) -#define outw_p(x,port) outw(x,__io(port)) -#define outl_p(x,port) outl(x,__io(port)) - -#define ioread8_rep(a,d,c) readsb(a,d,c) -#define ioread16_rep(a,d,c) readsw(a,d,c) -#define ioread32_rep(a,d,c) readsl(a,d,c) -#define iowrite8_rep(a,s,c) writesb(a,s,c) -#define iowrite16_rep(a,s,c) writesw(a,s,c) -#define iowrite32_rep(a,s,c) writesl(a,s,c) - -#define ioread8(X) readb(X) -#define ioread16(X) readw(X) -#define ioread32(X) readl(X) -#define iowrite8(val,X) writeb(val,X) -#define iowrite16(val,X) writew(val,X) -#define iowrite32(val,X) writel(val,X) +#define outb_p(x, port) outb(x, __io(port)) +#define outw_p(x, port) outw(x, __io(port)) +#define outl_p(x, port) outl(x, __io(port)) + +#define ioread8_rep(a, d, c) readsb(a, d, c) +#define ioread16_rep(a, d, c) readsw(a, d, c) +#define ioread32_rep(a, d, c) readsl(a, d, c) +#define iowrite8_rep(a, s, c) writesb(a, s, c) +#define iowrite16_rep(a, s, c) writesw(a, s, c) +#define iowrite32_rep(a, s, c) writesl(a, s, c) + +#define ioread8(x) readb(x) +#define ioread16(x) readw(x) +#define ioread32(x) readl(x) +#define iowrite8(val, x) writeb(val, x) +#define iowrite16(val, x) writew(val, x) +#define iowrite32(val, x) writel(val, x) #define mmiowb() wmb() diff --git a/arch/blackfin/include/asm/ipipe.h b/arch/blackfin/include/asm/ipipe.h index 4617ba6..d3b4044 100644 --- a/arch/blackfin/include/asm/ipipe.h +++ b/arch/blackfin/include/asm/ipipe.h @@ -35,9 +35,9 @@ #include <asm/atomic.h> #include <asm/traps.h> -#define IPIPE_ARCH_STRING "1.11-00" +#define IPIPE_ARCH_STRING "1.12-00" #define IPIPE_MAJOR_NUMBER 1 -#define IPIPE_MINOR_NUMBER 11 +#define IPIPE_MINOR_NUMBER 12 #define IPIPE_PATCH_NUMBER 0 #ifdef CONFIG_SMP @@ -124,16 +124,6 @@ static inline int __ipipe_check_tickdev(const char *devname) return 1; } -static inline void __ipipe_lock_root(void) -{ - set_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status)); -} - -static inline void __ipipe_unlock_root(void) -{ - clear_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status)); -} - void __ipipe_enable_pipeline(void); #define __ipipe_hook_critical_ipi(ipd) do { } while (0) diff --git a/arch/blackfin/include/asm/ipipe_base.h b/arch/blackfin/include/asm/ipipe_base.h index 490098f..0040920 100644 --- a/arch/blackfin/include/asm/ipipe_base.h +++ b/arch/blackfin/include/asm/ipipe_base.h @@ -51,23 +51,15 @@ extern unsigned long __ipipe_root_status; /* Alias to ipipe_root_cpudom_var(status) */ -#define __ipipe_stall_root() \ - do { \ - volatile unsigned long *p = &__ipipe_root_status; \ - set_bit(0, p); \ - } while (0) - -#define __ipipe_test_and_stall_root() \ - ({ \ - volatile unsigned long *p = &__ipipe_root_status; \ - test_and_set_bit(0, p); \ - }) - -#define __ipipe_test_root() \ - ({ \ - const unsigned long *p = &__ipipe_root_status; \ - test_bit(0, p); \ - }) +void __ipipe_stall_root(void); + +unsigned long __ipipe_test_and_stall_root(void); + +unsigned long __ipipe_test_root(void); + +void __ipipe_lock_root(void); + +void __ipipe_unlock_root(void); #endif /* !__ASSEMBLY__ */ diff --git a/arch/blackfin/include/asm/irqflags.h b/arch/blackfin/include/asm/irqflags.h index 9b19a19..813a1af 100644 --- a/arch/blackfin/include/asm/irqflags.h +++ b/arch/blackfin/include/asm/irqflags.h @@ -33,6 +33,7 @@ static inline unsigned long bfin_cli(void) #ifdef CONFIG_IPIPE +#include <linux/compiler.h> #include <linux/ipipe_base.h> #include <linux/ipipe_trace.h> @@ -49,12 +50,12 @@ static inline unsigned long bfin_cli(void) barrier(); \ } while (0) -static inline void raw_local_irq_enable(void) -{ - barrier(); - ipipe_check_context(ipipe_root_domain); - __ipipe_unstall_root(); -} +#define raw_local_irq_enable() \ + do { \ + barrier(); \ + ipipe_check_context(ipipe_root_domain); \ + __ipipe_unstall_root(); \ + } while (0) #define raw_local_save_flags_ptr(x) \ do { \ diff --git a/arch/blackfin/include/asm/kgdb.h b/arch/blackfin/include/asm/kgdb.h index c8b256d..8651afe 100644 --- a/arch/blackfin/include/asm/kgdb.h +++ b/arch/blackfin/include/asm/kgdb.h @@ -10,9 +10,6 @@ #include <linux/ptrace.h> -/* gdb locks */ -#define KGDB_MAX_NO_CPUS 8 - /* * BUFMAX defines the maximum number of characters in inbound/outbound buffers. * At least NUMREGBYTES*2 are needed for register packets. diff --git a/arch/blackfin/include/asm/mem_init.h b/arch/blackfin/include/asm/mem_init.h index 4179e32..7c8fe83 100644 --- a/arch/blackfin/include/asm/mem_init.h +++ b/arch/blackfin/include/asm/mem_init.h @@ -295,156 +295,3 @@ #else #define PLL_BYPASS 0 #endif - -/***************************************Currently Not Being Used *********************************/ - -#if defined(CONFIG_FLASH_SPEED_BWAT) && \ -defined(CONFIG_FLASH_SPEED_BRAT) && \ -defined(CONFIG_FLASH_SPEED_BHT) && \ -defined(CONFIG_FLASH_SPEED_BST) && \ -defined(CONFIG_FLASH_SPEED_BTT) - -#define flash_EBIU_AMBCTL_WAT ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 -#define flash_EBIU_AMBCTL_RAT ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 -#define flash_EBIU_AMBCTL_HT ((CONFIG_FLASH_SPEED_BHT * 4) / (4000000000 / CONFIG_SCLK_HZ)) -#define flash_EBIU_AMBCTL_ST ((CONFIG_FLASH_SPEED_BST * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 -#define flash_EBIU_AMBCTL_TT ((CONFIG_FLASH_SPEED_BTT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 - -#if (flash_EBIU_AMBCTL_TT > 3) -#define flash_EBIU_AMBCTL0_TT B0TT_4 -#endif -#if (flash_EBIU_AMBCTL_TT == 3) -#define flash_EBIU_AMBCTL0_TT B0TT_3 -#endif -#if (flash_EBIU_AMBCTL_TT == 2) -#define flash_EBIU_AMBCTL0_TT B0TT_2 -#endif -#if (flash_EBIU_AMBCTL_TT < 2) -#define flash_EBIU_AMBCTL0_TT B0TT_1 -#endif - -#if (flash_EBIU_AMBCTL_ST > 3) -#define flash_EBIU_AMBCTL0_ST B0ST_4 -#endif -#if (flash_EBIU_AMBCTL_ST == 3) -#define flash_EBIU_AMBCTL0_ST B0ST_3 -#endif -#if (flash_EBIU_AMBCTL_ST == 2) -#define flash_EBIU_AMBCTL0_ST B0ST_2 -#endif -#if (flash_EBIU_AMBCTL_ST < 2) -#define flash_EBIU_AMBCTL0_ST B0ST_1 -#endif - -#if (flash_EBIU_AMBCTL_HT > 2) -#define flash_EBIU_AMBCTL0_HT B0HT_3 -#endif -#if (flash_EBIU_AMBCTL_HT == 2) -#define flash_EBIU_AMBCTL0_HT B0HT_2 -#endif -#if (flash_EBIU_AMBCTL_HT == 1) -#define flash_EBIU_AMBCTL0_HT B0HT_1 -#endif -#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0) -#define flash_EBIU_AMBCTL0_HT B0HT_0 -#endif -#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0) -#define flash_EBIU_AMBCTL0_HT B0HT_1 -#endif - -#if (flash_EBIU_AMBCTL_WAT > 14) -#define flash_EBIU_AMBCTL0_WAT B0WAT_15 -#endif -#if (flash_EBIU_AMBCTL_WAT == 14) -#define flash_EBIU_AMBCTL0_WAT B0WAT_14 -#endif -#if (flash_EBIU_AMBCTL_WAT == 13) -#define flash_EBIU_AMBCTL0_WAT B0WAT_13 -#endif -#if (flash_EBIU_AMBCTL_WAT == 12) -#define flash_EBIU_AMBCTL0_WAT B0WAT_12 -#endif -#if (flash_EBIU_AMBCTL_WAT == 11) -#define flash_EBIU_AMBCTL0_WAT B0WAT_11 -#endif -#if (flash_EBIU_AMBCTL_WAT == 10) -#define flash_EBIU_AMBCTL0_WAT B0WAT_10 -#endif -#if (flash_EBIU_AMBCTL_WAT == 9) -#define flash_EBIU_AMBCTL0_WAT B0WAT_9 -#endif -#if (flash_EBIU_AMBCTL_WAT == 8) -#define flash_EBIU_AMBCTL0_WAT B0WAT_8 -#endif -#if (flash_EBIU_AMBCTL_WAT == 7) -#define flash_EBIU_AMBCTL0_WAT B0WAT_7 -#endif -#if (flash_EBIU_AMBCTL_WAT == 6) -#define flash_EBIU_AMBCTL0_WAT B0WAT_6 -#endif -#if (flash_EBIU_AMBCTL_WAT == 5) -#define flash_EBIU_AMBCTL0_WAT B0WAT_5 -#endif -#if (flash_EBIU_AMBCTL_WAT == 4) -#define flash_EBIU_AMBCTL0_WAT B0WAT_4 -#endif -#if (flash_EBIU_AMBCTL_WAT == 3) -#define flash_EBIU_AMBCTL0_WAT B0WAT_3 -#endif -#if (flash_EBIU_AMBCTL_WAT == 2) -#define flash_EBIU_AMBCTL0_WAT B0WAT_2 -#endif -#if (flash_EBIU_AMBCTL_WAT == 1) -#define flash_EBIU_AMBCTL0_WAT B0WAT_1 -#endif - -#if (flash_EBIU_AMBCTL_RAT > 14) -#define flash_EBIU_AMBCTL0_RAT B0RAT_15 -#endif -#if (flash_EBIU_AMBCTL_RAT == 14) -#define flash_EBIU_AMBCTL0_RAT B0RAT_14 -#endif -#if (flash_EBIU_AMBCTL_RAT == 13) -#define flash_EBIU_AMBCTL0_RAT B0RAT_13 -#endif -#if (flash_EBIU_AMBCTL_RAT == 12) -#define flash_EBIU_AMBCTL0_RAT B0RAT_12 -#endif -#if (flash_EBIU_AMBCTL_RAT == 11) -#define flash_EBIU_AMBCTL0_RAT B0RAT_11 -#endif -#if (flash_EBIU_AMBCTL_RAT == 10) -#define flash_EBIU_AMBCTL0_RAT B0RAT_10 -#endif -#if (flash_EBIU_AMBCTL_RAT == 9) -#define flash_EBIU_AMBCTL0_RAT B0RAT_9 -#endif -#if (flash_EBIU_AMBCTL_RAT == 8) -#define flash_EBIU_AMBCTL0_RAT B0RAT_8 -#endif -#if (flash_EBIU_AMBCTL_RAT == 7) -#define flash_EBIU_AMBCTL0_RAT B0RAT_7 -#endif -#if (flash_EBIU_AMBCTL_RAT == 6) -#define flash_EBIU_AMBCTL0_RAT B0RAT_6 -#endif -#if (flash_EBIU_AMBCTL_RAT == 5) -#define flash_EBIU_AMBCTL0_RAT B0RAT_5 -#endif -#if (flash_EBIU_AMBCTL_RAT == 4) -#define flash_EBIU_AMBCTL0_RAT B0RAT_4 -#endif -#if (flash_EBIU_AMBCTL_RAT == 3) -#define flash_EBIU_AMBCTL0_RAT B0RAT_3 -#endif -#if (flash_EBIU_AMBCTL_RAT == 2) -#define flash_EBIU_AMBCTL0_RAT B0RAT_2 -#endif -#if (flash_EBIU_AMBCTL_RAT == 1) -#define flash_EBIU_AMBCTL0_RAT B0RAT_1 -#endif - -#define flash_EBIU_AMBCTL0 \ - (flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \ - flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN) -#endif diff --git a/arch/blackfin/include/asm/mmu_context.h b/arch/blackfin/include/asm/mmu_context.h index 4a3be37..ae8ef4f 100644 --- a/arch/blackfin/include/asm/mmu_context.h +++ b/arch/blackfin/include/asm/mmu_context.h @@ -66,8 +66,8 @@ activate_l1stack(struct mm_struct *mm, unsigned long sp_base) #define activate_mm(prev, next) switch_mm(prev, next, NULL) -static inline void switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm, - struct task_struct *tsk) +static inline void __switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm, + struct task_struct *tsk) { #ifdef CONFIG_MPU unsigned int cpu = smp_processor_id(); @@ -95,7 +95,24 @@ static inline void switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_m #endif } +#ifdef CONFIG_IPIPE +#define lock_mm_switch(flags) local_irq_save_hw_cond(flags) +#define unlock_mm_switch(flags) local_irq_restore_hw_cond(flags) +#else +#define lock_mm_switch(flags) do { (void)(flags); } while (0) +#define unlock_mm_switch(flags) do { (void)(flags); } while (0) +#endif /* CONFIG_IPIPE */ + #ifdef CONFIG_MPU +static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, + struct task_struct *tsk) +{ + unsigned long flags; + lock_mm_switch(flags); + __switch_mm(prev, next, tsk); + unlock_mm_switch(flags); +} + static inline void protect_page(struct mm_struct *mm, unsigned long addr, unsigned long flags) { @@ -128,6 +145,12 @@ static inline void update_protections(struct mm_struct *mm) set_mask_dcplbs(mm->context.page_rwx_mask, cpu); } } +#else /* !CONFIG_MPU */ +static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, + struct task_struct *tsk) +{ + __switch_mm(prev, next, tsk); +} #endif static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) @@ -173,4 +196,10 @@ static inline void destroy_context(struct mm_struct *mm) #endif } +#define ipipe_mm_switch_protect(flags) \ + local_irq_save_hw_cond(flags) + +#define ipipe_mm_switch_unprotect(flags) \ + local_irq_restore_hw_cond(flags) + #endif diff --git a/arch/blackfin/include/asm/pci.h b/arch/blackfin/include/asm/pci.h index 6127735..99cae2e 100644 --- a/arch/blackfin/include/asm/pci.h +++ b/arch/blackfin/include/asm/pci.h @@ -4,145 +4,19 @@ #define _ASM_BFIN_PCI_H #include <asm/scatterlist.h> +#include <asm-generic/pci-dma-compat.h> +#include <asm-generic/pci.h> -/* - * - * Written by Wout Klaren. - */ - -/* Added by Chang Junxiao */ #define PCIBIOS_MIN_IO 0x00001000 #define PCIBIOS_MIN_MEM 0x10000000 -#define PCI_DMA_BUS_IS_PHYS (1) -struct pci_ops; - -/* - * Structure with hardware dependent information and functions of the - * PCI bus. - */ -struct pci_bus_info { - - /* - * Resources of the PCI bus. - */ - struct resource mem_space; - struct resource io_space; - - /* - * System dependent functions. - */ - struct pci_ops *bfin_pci_ops; - void (*fixup) (int pci_modify); - void (*conf_device) (unsigned char bus, unsigned char device_fn); -}; - -#define pcibios_assign_all_busses() 0 static inline void pcibios_set_master(struct pci_dev *dev) { - /* No special bus mastering setup handling */ } static inline void pcibios_penalize_isa_irq(int irq) { - /* We don't do dynamic PCI IRQ allocation */ } -static inline dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr, - size_t size, int direction) -{ - if (direction == PCI_DMA_NONE) - BUG(); - - /* return virt_to_bus(ptr); */ - return (dma_addr_t) ptr; -} - -/* Unmap a single streaming mode DMA translation. The dma_addr and size - * must match what was provided for in a previous pci_map_single call. All - * other usages are undefined. - * - * After this call, reads by the cpu to the buffer are guarenteed to see - * whatever the device wrote there. - */ -static inline void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr, - size_t size, int direction) -{ - if (direction == PCI_DMA_NONE) - BUG(); - - /* Nothing to do */ -} - -/* Map a set of buffers described by scatterlist in streaming - * mode for DMA. This is the scather-gather version of the - * above pci_map_single interface. Here the scatter gather list - * elements are each tagged with the appropriate dma address - * and length. They are obtained via sg_dma_{address,length}(SG). - * - * NOTE: An implementation may be able to use a smaller number of - * DMA address/length pairs than there are SG table elements. - * (for example via virtual mapping capabilities) - * The routine returns the number of addr/length pairs actually - * used, at most nents. - * - * Device ownership issues as mentioned above for pci_map_single are - * the same here. - */ -static inline int pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg, - int nents, int direction) -{ - if (direction == PCI_DMA_NONE) - BUG(); - return nents; -} - -/* Unmap a set of streaming mode DMA translations. - * Again, cpu read rules concerning calls here are the same as for - * pci_unmap_single() above. - */ -static inline void pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg, - int nents, int direction) -{ - if (direction == PCI_DMA_NONE) - BUG(); - - /* Nothing to do */ -} - -/* Make physical memory consistent for a single - * streaming mode DMA translation after a transfer. - * - * If you perform a pci_map_single() but wish to interrogate the - * buffer using the cpu, yet do not wish to teardown the PCI dma - * mapping, you must call this function before doing so. At the - * next point you give the PCI dma address back to the card, the - * device again owns the buffer. - */ -static inline void pci_dma_sync_single(struct pci_dev *hwdev, - dma_addr_t dma_handle, size_t size, - int direction) -{ - if (direction == PCI_DMA_NONE) - BUG(); - - /* Nothing to do */ -} - -/* Make physical memory consistent for a set of streaming - * mode DMA translations after a transfer. - * - * The same as pci_dma_sync_single but for a scatter-gather list, - * same rules and usage. - */ -static inline void pci_dma_sync_sg(struct pci_dev *hwdev, - struct scatterlist *sg, int nelems, - int direction) -{ - if (direction == PCI_DMA_NONE) - BUG(); - - /* Nothing to do */ -} #endif /* _ASM_BFIN_PCI_H */ diff --git a/arch/blackfin/include/asm/ptrace.h b/arch/blackfin/include/asm/ptrace.h index 27290c9..b33a448 100644 --- a/arch/blackfin/include/asm/ptrace.h +++ b/arch/blackfin/include/asm/ptrace.h @@ -89,9 +89,9 @@ struct pt_regs { #define PTRACE_GETREGS 12 #define PTRACE_SETREGS 13 /* ptrace signal */ -#define PTRACE_GETFDPIC 31 -#define PTRACE_GETFDPIC_EXEC 0 -#define PTRACE_GETFDPIC_INTERP 1 +#define PTRACE_GETFDPIC 31 /* get the ELF fdpic loadmap address */ +#define PTRACE_GETFDPIC_EXEC 0 /* [addr] request the executable loadmap */ +#define PTRACE_GETFDPIC_INTERP 1 /* [addr] request the interpreter loadmap */ #define PS_S (0x0002) diff --git a/arch/blackfin/include/asm/sections.h b/arch/blackfin/include/asm/sections.h index 1f5381f..42f6c53 100644 --- a/arch/blackfin/include/asm/sections.h +++ b/arch/blackfin/include/asm/sections.h @@ -13,10 +13,18 @@ extern unsigned long memory_mtd_start, memory_mtd_end, mtd_size; extern unsigned long _ramstart, _ramend, _rambase; extern unsigned long memory_start, memory_end, physical_mem_end; -extern char _stext_l1[], _etext_l1[], _sdata_l1[], _edata_l1[], _sbss_l1[], - _ebss_l1[], _l1_lma_start[], _sdata_b_l1[], _sbss_b_l1[], _ebss_b_l1[], - _stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[], _sbss_l2[], - _ebss_l2[], _l2_lma_start[]; +/* + * The weak markings on the lengths might seem weird, but this is required + * in order to make gcc accept the fact that these may actually have a value + * of 0 (since they aren't actually addresses, but sizes of sections). + */ +extern char _stext_l1[], _etext_l1[], _text_l1_lma[], __weak _text_l1_len[]; +extern char _sdata_l1[], _edata_l1[], _sbss_l1[], _ebss_l1[], + _data_l1_lma[], __weak _data_l1_len[]; +extern char _sdata_b_l1[], _edata_b_l1[], _sbss_b_l1[], _ebss_b_l1[], + _data_b_l1_lma[], __weak _data_b_l1_len[]; +extern char _stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[], + _sbss_l2[], _ebss_l2[], _l2_lma[], __weak _l2_len[]; #include <asm/mem_map.h> diff --git a/arch/blackfin/include/asm/thread_info.h b/arch/blackfin/include/asm/thread_info.h index afb3a86..a40d936 100644 --- a/arch/blackfin/include/asm/thread_info.h +++ b/arch/blackfin/include/asm/thread_info.h @@ -103,11 +103,13 @@ static inline struct thread_info *current_thread_info(void) #define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */ #define TIF_FREEZE 6 /* is freezing for suspend */ #define TIF_IRQ_SYNC 7 /* sync pipeline stage */ +#define TIF_NOTIFY_RESUME 8 /* callback before returning to user */ /* as above, but as bit values */ #define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) #define _TIF_SIGPENDING (1<<TIF_SIGPENDING) #define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED) +#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME) #define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) #define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK) #define _TIF_FREEZE (1<<TIF_FREEZE) diff --git a/arch/blackfin/include/asm/trace.h b/arch/blackfin/include/asm/trace.h index 609ad3c..dc0aa55 100644 --- a/arch/blackfin/include/asm/trace.h +++ b/arch/blackfin/include/asm/trace.h @@ -28,6 +28,8 @@ extern unsigned long software_trace_buff[]; #ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON +#define trace_buffer_init() bfin_write_TBUFCTL(BFIN_TRACE_INIT) + #define trace_buffer_save(x) \ do { \ (x) = bfin_read_TBUFCTL(); \ diff --git a/arch/blackfin/include/asm/uaccess.h b/arch/blackfin/include/asm/uaccess.h index c03b853..1c0d190 100644 --- a/arch/blackfin/include/asm/uaccess.h +++ b/arch/blackfin/include/asm/uaccess.h @@ -17,9 +17,7 @@ #include <linux/string.h> #include <asm/segment.h> -#ifdef CONFIG_ACCESS_CHECK -# include <asm/bfin-global.h> -#endif +#include <asm/sections.h> #define get_ds() (KERNEL_DS) #define get_fs() (current_thread_info()->addr_limit) diff --git a/arch/blackfin/include/asm/unistd.h b/arch/blackfin/include/asm/unistd.h index 779be02..22886cb 100644 --- a/arch/blackfin/include/asm/unistd.h +++ b/arch/blackfin/include/asm/unistd.h @@ -388,8 +388,9 @@ #define __NR_pwritev 367 #define __NR_rt_tgsigqueueinfo 368 #define __NR_perf_event_open 369 +#define __NR_recvmmsg 370 -#define __NR_syscall 370 +#define __NR_syscall 371 #define NR_syscalls __NR_syscall /* Old optional stuff no one actually uses */ diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index 3946aff..924c002 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -37,9 +37,8 @@ static int __init blackfin_dma_init(void) printk(KERN_INFO "Blackfin DMA Controller\n"); for (i = 0; i < MAX_DMA_CHANNELS; i++) { - dma_ch[i].chan_status = DMA_CHANNEL_FREE; + atomic_set(&dma_ch[i].chan_status, 0); dma_ch[i].regs = dma_io_base_addr[i]; - mutex_init(&(dma_ch[i].dmalock)); } /* Mark MEMDMA Channel 0 as requested since we're using it internally */ request_dma(CH_MEM_STREAM0_DEST, "Blackfin dma_memcpy"); @@ -60,7 +59,7 @@ static int proc_dma_show(struct seq_file *m, void *v) int i; for (i = 0; i < MAX_DMA_CHANNELS; ++i) - if (dma_ch[i].chan_status != DMA_CHANNEL_FREE) + if (dma_channel_active(i)) seq_printf(m, "%2d: %s\n", i, dma_ch[i].device_id); return 0; @@ -107,20 +106,11 @@ int request_dma(unsigned int channel, const char *device_id) } #endif - mutex_lock(&(dma_ch[channel].dmalock)); - - if ((dma_ch[channel].chan_status == DMA_CHANNEL_REQUESTED) - || (dma_ch[channel].chan_status == DMA_CHANNEL_ENABLED)) { - mutex_unlock(&(dma_ch[channel].dmalock)); + if (atomic_cmpxchg(&dma_ch[channel].chan_status, 0, 1)) { pr_debug("DMA CHANNEL IN USE \n"); return -EBUSY; - } else { - dma_ch[channel].chan_status = DMA_CHANNEL_REQUESTED; - pr_debug("DMA CHANNEL IS ALLOCATED \n"); } - mutex_unlock(&(dma_ch[channel].dmalock)); - #ifdef CONFIG_BF54x if (channel >= CH_UART2_RX && channel <= CH_UART3_TX) { unsigned int per_map; @@ -148,21 +138,20 @@ EXPORT_SYMBOL(request_dma); int set_dma_callback(unsigned int channel, irq_handler_t callback, void *data) { - BUG_ON(channel >= MAX_DMA_CHANNELS || - dma_ch[channel].chan_status == DMA_CHANNEL_FREE); + int ret; + unsigned int irq; - if (callback != NULL) { - int ret; - unsigned int irq = channel2irq(channel); + BUG_ON(channel >= MAX_DMA_CHANNELS || !callback || + !atomic_read(&dma_ch[channel].chan_status)); - ret = request_irq(irq, callback, IRQF_DISABLED, - dma_ch[channel].device_id, data); - if (ret) - return ret; + irq = channel2irq(channel); + ret = request_irq(irq, callback, 0, dma_ch[channel].device_id, data); + if (ret) + return ret; + + dma_ch[channel].irq = irq; + dma_ch[channel].data = data; - dma_ch[channel].irq = irq; - dma_ch[channel].data = data; - } return 0; } EXPORT_SYMBOL(set_dma_callback); @@ -184,7 +173,7 @@ void free_dma(unsigned int channel) { pr_debug("freedma() : BEGIN \n"); BUG_ON(channel >= MAX_DMA_CHANNELS || - dma_ch[channel].chan_status == DMA_CHANNEL_FREE); + !atomic_read(&dma_ch[channel].chan_status)); /* Halt the DMA */ disable_dma(channel); @@ -194,9 +183,7 @@ void free_dma(unsigned int channel) free_irq(dma_ch[channel].irq, dma_ch[channel].data); /* Clear the DMA Variable in the Channel */ - mutex_lock(&(dma_ch[channel].dmalock)); - dma_ch[channel].chan_status = DMA_CHANNEL_FREE; - mutex_unlock(&(dma_ch[channel].dmalock)); + atomic_set(&dma_ch[channel].chan_status, 0); pr_debug("freedma() : END \n"); } @@ -210,13 +197,14 @@ int blackfin_dma_suspend(void) { int i; - for (i = 0; i < MAX_DMA_SUSPEND_CHANNELS; ++i) { - if (dma_ch[i].chan_status == DMA_CHANNEL_ENABLED) { + for (i = 0; i < MAX_DMA_CHANNELS; ++i) { + if (dma_ch[i].regs->cfg & DMAEN) { printk(KERN_ERR "DMA Channel %d failed to suspend\n", i); return -EBUSY; } - dma_ch[i].saved_peripheral_map = dma_ch[i].regs->peripheral_map; + if (i < MAX_DMA_SUSPEND_CHANNELS) + dma_ch[i].saved_peripheral_map = dma_ch[i].regs->peripheral_map; } return 0; diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index 22705ee..a174596 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -100,6 +100,12 @@ u8 pmux_offset[][16] = { }; # endif +#elif defined(BF538_FAMILY) +static unsigned short * const port_fer[] = { + (unsigned short *) PORTCIO_FER, + (unsigned short *) PORTDIO_FER, + (unsigned short *) PORTEIO_FER, +}; #endif static unsigned short reserved_gpio_map[GPIO_BANK_NUM]; @@ -163,6 +169,27 @@ static int cmp_label(unsigned short ident, const char *label) static void port_setup(unsigned gpio, unsigned short usage) { +#if defined(BF538_FAMILY) + /* + * BF538/9 Port C,D and E are special. + * Inverted PORT_FER polarity on CDE and no PORF_FER on F + * Regular PORT F GPIOs are handled here, CDE are exclusively + * managed by GPIOLIB + */ + + if (gpio < MAX_BLACKFIN_GPIOS || gpio >= MAX_RESOURCES) + return; + + gpio -= MAX_BLACKFIN_GPIOS; + + if (usage == GPIO_USAGE) + *port_fer[gpio_bank(gpio)] |= gpio_bit(gpio); + else + *port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio); + SSYNC(); + return; +#endif + if (check_gpio(gpio)) return; @@ -762,6 +789,8 @@ int peripheral_request(unsigned short per, const char *label) if (!(per & P_DEFINED)) return -ENODEV; + BUG_ON(ident >= MAX_RESOURCES); + local_irq_save_hw(flags); /* If a pin can be muxed as either GPIO or peripheral, make @@ -979,6 +1008,76 @@ void bfin_gpio_free(unsigned gpio) } EXPORT_SYMBOL(bfin_gpio_free); +#ifdef BFIN_SPECIAL_GPIO_BANKS +static unsigned short reserved_special_gpio_map[gpio_bank(MAX_RESOURCES)]; + +int bfin_special_gpio_request(unsigned gpio, const char *label) +{ + unsigned long flags; + + local_irq_save_hw(flags); + + /* + * Allow that the identical GPIO can + * be requested from the same driver twice + * Do nothing and return - + */ + + if (cmp_label(gpio, label) == 0) { + local_irq_restore_hw(flags); + return 0; + } + + if (unlikely(reserved_special_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + local_irq_restore_hw(flags); + printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved by %s !\n", + gpio, get_label(gpio)); + + return -EBUSY; + } + if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + local_irq_restore_hw(flags); + printk(KERN_ERR + "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n", + gpio, get_label(gpio)); + + return -EBUSY; + } + + reserved_special_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio); + reserved_peri_map[gpio_bank(gpio)] |= gpio_bit(gpio); + + set_label(gpio, label); + local_irq_restore_hw(flags); + port_setup(gpio, GPIO_USAGE); + + return 0; +} +EXPORT_SYMBOL(bfin_special_gpio_request); + +void bfin_special_gpio_free(unsigned gpio) +{ + unsigned long flags; + + might_sleep(); + + local_irq_save_hw(flags); + + if (unlikely(!(reserved_special_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) { + gpio_error(gpio); + local_irq_restore_hw(flags); + return; + } + + reserved_special_gpio_map[gpio_bank(gpio)] &= ~gpio_bit(gpio); + reserved_peri_map[gpio_bank(gpio)] &= ~gpio_bit(gpio); + set_label(gpio, "free"); + local_irq_restore_hw(flags); +} +EXPORT_SYMBOL(bfin_special_gpio_free); +#endif + + int bfin_gpio_irq_request(unsigned gpio, const char *label) { unsigned long flags; diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/arch/blackfin/kernel/cplb-mpu/cplbinit.c index b52c1f8..8d42b9e 100644 --- a/arch/blackfin/kernel/cplb-mpu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-mpu/cplbinit.c @@ -92,6 +92,6 @@ void __init generate_cplb_tables_cpu(unsigned int cpu) icplb_tbl[cpu][i_i++].data = 0; } -void generate_cplb_tables_all(void) +void __init generate_cplb_tables_all(void) { } diff --git a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c index 69e0e53..930c01c 100644 --- a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c +++ b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c @@ -113,11 +113,11 @@ static noinline int dcplb_miss(unsigned int cpu) addr = L2_START; d_data = L2_DMEMORY; } else if (addr >= physical_mem_end) { - if (addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE - && (status & FAULT_USERSUPV)) { - addr &= ~0x3fffff; + if (addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE) { + addr &= ~(4 * 1024 * 1024 - 1); d_data &= ~PAGE_SIZE_4KB; d_data |= PAGE_SIZE_4MB; + d_data |= CPLB_USER_RD | CPLB_USER_WR; } else if (addr >= BOOT_ROM_START && addr < BOOT_ROM_START + BOOT_ROM_LENGTH && (status & (FAULT_RW | FAULT_USERSUPV)) == FAULT_USERSUPV) { addr &= ~(1 * 1024 * 1024 - 1); @@ -203,7 +203,12 @@ static noinline int icplb_miss(unsigned int cpu) addr = L2_START; i_data = L2_IMEMORY; } else if (addr >= physical_mem_end) { - if (addr >= BOOT_ROM_START && addr < BOOT_ROM_START + BOOT_ROM_LENGTH + if (addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE) { + addr &= ~(4 * 1024 * 1024 - 1); + i_data &= ~PAGE_SIZE_4KB; + i_data |= PAGE_SIZE_4MB; + i_data |= CPLB_USER_RD; + } else if (addr >= BOOT_ROM_START && addr < BOOT_ROM_START + BOOT_ROM_LENGTH && (status & FAULT_USERSUPV)) { addr &= ~(1 * 1024 * 1024 - 1); i_data &= ~PAGE_SIZE_4KB; diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c index fd9a2f3..282a791 100644 --- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c @@ -89,15 +89,25 @@ void __init generate_cplb_tables_cpu(unsigned int cpu) void __init generate_cplb_tables_all(void) { + unsigned long uncached_end; int i_d, i_i; i_d = 0; /* Normal RAM, including MTD FS. */ #ifdef CONFIG_MTD_UCLINUX - dcplb_bounds[i_d].eaddr = memory_mtd_start + mtd_size; + uncached_end = memory_mtd_start + mtd_size; #else - dcplb_bounds[i_d].eaddr = memory_end; + uncached_end = memory_end; #endif + /* + * if DMA uncached is less than 1MB, mark the 1MB chunk as uncached + * so that we don't have to use 4kB pages and cause CPLB thrashing + */ + if ((DMA_UNCACHED_REGION >= 1 * 1024 * 1024) || !DMA_UNCACHED_REGION || + ((_ramend - uncached_end) >= 1 * 1024 * 1024)) + dcplb_bounds[i_d].eaddr = uncached_end; + else + dcplb_bounds[i_d].eaddr = uncached_end & ~(1 * 1024 * 1024); dcplb_bounds[i_d++].data = SDRAM_DGENERIC; /* DMA uncached region. */ if (DMA_UNCACHED_REGION) { @@ -135,18 +145,15 @@ void __init generate_cplb_tables_all(void) i_i = 0; /* Normal RAM, including MTD FS. */ -#ifdef CONFIG_MTD_UCLINUX - icplb_bounds[i_i].eaddr = memory_mtd_start + mtd_size; -#else - icplb_bounds[i_i].eaddr = memory_end; -#endif + icplb_bounds[i_i].eaddr = uncached_end; icplb_bounds[i_i++].data = SDRAM_IGENERIC; - /* DMA uncached region. */ - if (DMA_UNCACHED_REGION) { - icplb_bounds[i_i].eaddr = _ramend; - icplb_bounds[i_i++].data = 0; - } if (_ramend != physical_mem_end) { + /* DMA uncached region. */ + if (DMA_UNCACHED_REGION) { + /* Normally this hole is caught by the async below. */ + icplb_bounds[i_i].eaddr = _ramend; + icplb_bounds[i_i++].data = 0; + } /* Reserved memory. */ icplb_bounds[i_i].eaddr = physical_mem_end; icplb_bounds[i_i++].data = (reserved_mem_icache_on ? diff --git a/arch/blackfin/kernel/dma-mapping.c b/arch/blackfin/kernel/dma-mapping.c index e74e74d..e937f32 100644 --- a/arch/blackfin/kernel/dma-mapping.c +++ b/arch/blackfin/kernel/dma-mapping.c @@ -7,30 +7,25 @@ */ #include <linux/types.h> -#include <linux/mm.h> +#include <linux/gfp.h> #include <linux/string.h> -#include <linux/bootmem.h> #include <linux/spinlock.h> -#include <linux/device.h> #include <linux/dma-mapping.h> -#include <linux/io.h> #include <linux/scatterlist.h> -#include <asm/cacheflush.h> -#include <asm/bfin-global.h> static spinlock_t dma_page_lock; -static unsigned int *dma_page; +static unsigned long *dma_page; static unsigned int dma_pages; static unsigned long dma_base; static unsigned long dma_size; static unsigned int dma_initialized; -void dma_alloc_init(unsigned long start, unsigned long end) +static void dma_alloc_init(unsigned long start, unsigned long end) { spin_lock_init(&dma_page_lock); dma_initialized = 0; - dma_page = (unsigned int *)__get_free_page(GFP_KERNEL); + dma_page = (unsigned long *)__get_free_page(GFP_KERNEL); memset(dma_page, 0, PAGE_SIZE); dma_base = PAGE_ALIGN(start); dma_size = PAGE_ALIGN(end) - PAGE_ALIGN(start); @@ -58,10 +53,11 @@ static unsigned long __alloc_dma_pages(unsigned int pages) spin_lock_irqsave(&dma_page_lock, flags); for (i = 0; i < dma_pages;) { - if (dma_page[i++] == 0) { + if (test_bit(i++, dma_page) == 0) { if (++count == pages) { while (count--) - dma_page[--i] = 1; + __set_bit(--i, dma_page); + ret = dma_base + (i << PAGE_SHIFT); break; } @@ -84,14 +80,14 @@ static void __free_dma_pages(unsigned long addr, unsigned int pages) } spin_lock_irqsave(&dma_page_lock, flags); - for (i = page; i < page + pages; i++) { - dma_page[i] = 0; - } + for (i = page; i < page + pages; i++) + __clear_bit(i, dma_page); + spin_unlock_irqrestore(&dma_page_lock, flags); } void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, gfp_t gfp) + dma_addr_t *dma_handle, gfp_t gfp) { void *ret; @@ -115,21 +111,14 @@ dma_free_coherent(struct device *dev, size_t size, void *vaddr, EXPORT_SYMBOL(dma_free_coherent); /* - * Dummy functions defined for some existing drivers + * Streaming DMA mappings */ - -dma_addr_t -dma_map_single(struct device *dev, void *ptr, size_t size, - enum dma_data_direction direction) +void __dma_sync(dma_addr_t addr, size_t size, + enum dma_data_direction dir) { - BUG_ON(direction == DMA_NONE); - - invalidate_dcache_range((unsigned long)ptr, - (unsigned long)ptr + size); - - return (dma_addr_t) ptr; + _dma_sync(addr, size, dir); } -EXPORT_SYMBOL(dma_map_single); +EXPORT_SYMBOL(__dma_sync); int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, @@ -137,30 +126,23 @@ dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, { int i; - BUG_ON(direction == DMA_NONE); - for (i = 0; i < nents; i++, sg++) { sg->dma_address = (dma_addr_t) sg_virt(sg); - - invalidate_dcache_range(sg_dma_address(sg), - sg_dma_address(sg) + - sg_dma_len(sg)); + __dma_sync(sg_dma_address(sg), sg_dma_len(sg), direction); } return nents; } EXPORT_SYMBOL(dma_map_sg); -void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, - enum dma_data_direction direction) +void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, + int nelems, enum dma_data_direction direction) { - BUG_ON(direction == DMA_NONE); -} -EXPORT_SYMBOL(dma_unmap_single); + int i; -void dma_unmap_sg(struct device *dev, struct scatterlist *sg, - int nhwentries, enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); + for (i = 0; i < nelems; i++, sg++) { + sg->dma_address = (dma_addr_t) sg_virt(sg); + __dma_sync(sg_dma_address(sg), sg_dma_len(sg), direction); + } } -EXPORT_SYMBOL(dma_unmap_sg); +EXPORT_SYMBOL(dma_sync_sg_for_device); diff --git a/arch/blackfin/kernel/gptimers.c b/arch/blackfin/kernel/gptimers.c index 7281a91..cdbe075 100644 --- a/arch/blackfin/kernel/gptimers.c +++ b/arch/blackfin/kernel/gptimers.c @@ -137,7 +137,7 @@ static uint32_t const timil_mask[MAX_BLACKFIN_GPTIMERS] = #endif }; -void set_gptimer_pwidth(int timer_id, uint32_t value) +void set_gptimer_pwidth(unsigned int timer_id, uint32_t value) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); timer_regs[timer_id]->width = value; @@ -145,14 +145,14 @@ void set_gptimer_pwidth(int timer_id, uint32_t value) } EXPORT_SYMBOL(set_gptimer_pwidth); -uint32_t get_gptimer_pwidth(int timer_id) +uint32_t get_gptimer_pwidth(unsigned int timer_id) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); return timer_regs[timer_id]->width; } EXPORT_SYMBOL(get_gptimer_pwidth); -void set_gptimer_period(int timer_id, uint32_t period) +void set_gptimer_period(unsigned int timer_id, uint32_t period) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); timer_regs[timer_id]->period = period; @@ -160,28 +160,28 @@ void set_gptimer_period(int timer_id, uint32_t period) } EXPORT_SYMBOL(set_gptimer_period); -uint32_t get_gptimer_period(int timer_id) +uint32_t get_gptimer_period(unsigned int timer_id) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); return timer_regs[timer_id]->period; } EXPORT_SYMBOL(get_gptimer_period); -uint32_t get_gptimer_count(int timer_id) +uint32_t get_gptimer_count(unsigned int timer_id) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); return timer_regs[timer_id]->counter; } EXPORT_SYMBOL(get_gptimer_count); -uint32_t get_gptimer_status(int group) +uint32_t get_gptimer_status(unsigned int group) { tassert(group < BFIN_TIMER_NUM_GROUP); return group_regs[group]->status; } EXPORT_SYMBOL(get_gptimer_status); -void set_gptimer_status(int group, uint32_t value) +void set_gptimer_status(unsigned int group, uint32_t value) { tassert(group < BFIN_TIMER_NUM_GROUP); group_regs[group]->status = value; @@ -189,42 +189,42 @@ void set_gptimer_status(int group, uint32_t value) } EXPORT_SYMBOL(set_gptimer_status); -int get_gptimer_intr(int timer_id) +int get_gptimer_intr(unsigned int timer_id) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); return !!(group_regs[BFIN_TIMER_OCTET(timer_id)]->status & timil_mask[timer_id]); } EXPORT_SYMBOL(get_gptimer_intr); -void clear_gptimer_intr(int timer_id) +void clear_gptimer_intr(unsigned int timer_id) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); group_regs[BFIN_TIMER_OCTET(timer_id)]->status = timil_mask[timer_id]; } EXPORT_SYMBOL(clear_gptimer_intr); -int get_gptimer_over(int timer_id) +int get_gptimer_over(unsigned int timer_id) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); return !!(group_regs[BFIN_TIMER_OCTET(timer_id)]->status & tovf_mask[timer_id]); } EXPORT_SYMBOL(get_gptimer_over); -void clear_gptimer_over(int timer_id) +void clear_gptimer_over(unsigned int timer_id) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); group_regs[BFIN_TIMER_OCTET(timer_id)]->status = tovf_mask[timer_id]; } EXPORT_SYMBOL(clear_gptimer_over); -int get_gptimer_run(int timer_id) +int get_gptimer_run(unsigned int timer_id) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); return !!(group_regs[BFIN_TIMER_OCTET(timer_id)]->status & trun_mask[timer_id]); } EXPORT_SYMBOL(get_gptimer_run); -void set_gptimer_config(int timer_id, uint16_t config) +void set_gptimer_config(unsigned int timer_id, uint16_t config) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); timer_regs[timer_id]->config = config; @@ -232,7 +232,7 @@ void set_gptimer_config(int timer_id, uint16_t config) } EXPORT_SYMBOL(set_gptimer_config); -uint16_t get_gptimer_config(int timer_id) +uint16_t get_gptimer_config(unsigned int timer_id) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); return timer_regs[timer_id]->config; @@ -280,7 +280,7 @@ void disable_gptimers_sync(uint16_t mask) } EXPORT_SYMBOL(disable_gptimers_sync); -void set_gptimer_pulse_hi(int timer_id) +void set_gptimer_pulse_hi(unsigned int timer_id) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); timer_regs[timer_id]->config |= TIMER_PULSE_HI; @@ -288,7 +288,7 @@ void set_gptimer_pulse_hi(int timer_id) } EXPORT_SYMBOL(set_gptimer_pulse_hi); -void clear_gptimer_pulse_hi(int timer_id) +void clear_gptimer_pulse_hi(unsigned int timer_id) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); timer_regs[timer_id]->config &= ~TIMER_PULSE_HI; diff --git a/arch/blackfin/kernel/ipipe.c b/arch/blackfin/kernel/ipipe.c index 5d73823..a77307a 100644 --- a/arch/blackfin/kernel/ipipe.c +++ b/arch/blackfin/kernel/ipipe.c @@ -335,3 +335,70 @@ void __ipipe_enable_root_irqs_hw(void) __clear_bit(IPIPE_STALL_FLAG, &ipipe_root_cpudom_var(status)); bfin_sti(bfin_irq_flags); } + +/* + * We could use standard atomic bitops in the following root status + * manipulation routines, but let's prepare for SMP support in the + * same move, preventing CPU migration as required. + */ +void __ipipe_stall_root(void) +{ + unsigned long *p, flags; + + local_irq_save_hw(flags); + p = &__ipipe_root_status; + __set_bit(IPIPE_STALL_FLAG, p); + local_irq_restore_hw(flags); +} +EXPORT_SYMBOL(__ipipe_stall_root); + +unsigned long __ipipe_test_and_stall_root(void) +{ + unsigned long *p, flags; + int x; + + local_irq_save_hw(flags); + p = &__ipipe_root_status; + x = __test_and_set_bit(IPIPE_STALL_FLAG, p); + local_irq_restore_hw(flags); + + return x; +} +EXPORT_SYMBOL(__ipipe_test_and_stall_root); + +unsigned long __ipipe_test_root(void) +{ + const unsigned long *p; + unsigned long flags; + int x; + + local_irq_save_hw_smp(flags); + p = &__ipipe_root_status; + x = test_bit(IPIPE_STALL_FLAG, p); + local_irq_restore_hw_smp(flags); + + return x; +} +EXPORT_SYMBOL(__ipipe_test_root); + +void __ipipe_lock_root(void) +{ + unsigned long *p, flags; + + local_irq_save_hw(flags); + p = &__ipipe_root_status; + __set_bit(IPIPE_SYNCDEFER_FLAG, p); + local_irq_restore_hw(flags); +} +EXPORT_SYMBOL(__ipipe_lock_root); + +void __ipipe_unlock_root(void) +{ + unsigned long *p, flags; + + local_irq_save_hw(flags); + p = &__ipipe_root_status; + __clear_bit(IPIPE_SYNCDEFER_FLAG, p); + local_irq_restore_hw(flags); +} +EXPORT_SYMBOL(__ipipe_unlock_root); diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c index cce79d0..f1036b6 100644 --- a/arch/blackfin/kernel/kgdb.c +++ b/arch/blackfin/kernel/kgdb.c @@ -24,16 +24,6 @@ #include <asm/blackfin.h> #include <asm/dma.h> -/* Put the error code here just in case the user cares. */ -int gdb_bfin_errcode; -/* Likewise, the vector number here (since GDB only gets the signal - number through the usual means, and that's not very specific). */ -int gdb_bfin_vector = -1; - -#if KGDB_MAX_NO_CPUS != 8 -#error change the definition of slavecpulocks -#endif - void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) { gdb_regs[BFIN_R0] = regs->r0; @@ -369,13 +359,6 @@ void kgdb_roundup_cpu(int cpu, unsigned long flags) } #endif -void kgdb_post_primary_code(struct pt_regs *regs, int eVector, int err_code) -{ - /* Master processor is completely in the debugger */ - gdb_bfin_vector = eVector; - gdb_bfin_errcode = err_code; -} - int kgdb_arch_handle_exception(int vector, int signo, int err_code, char *remcom_in_buffer, char *remcom_out_buffer, diff --git a/arch/blackfin/kernel/kgdb_test.c b/arch/blackfin/kernel/kgdb_test.c index 59fc42d..9a4b075 100644 --- a/arch/blackfin/kernel/kgdb_test.c +++ b/arch/blackfin/kernel/kgdb_test.c @@ -17,8 +17,9 @@ #include <asm/blackfin.h> +/* Symbols are here for kgdb test to poke directly */ static char cmdline[256]; -static unsigned long len; +static size_t len; #ifndef CONFIG_SMP static int num1 __attribute__((l1_data)); @@ -27,11 +28,10 @@ void kgdb_l1_test(void) __attribute__((l1_text)); void kgdb_l1_test(void) { - printk(KERN_ALERT "L1(before change) : data variable addr = 0x%p, data value is %d\n", &num1, num1); - printk(KERN_ALERT "L1 : code function addr = 0x%p\n", kgdb_l1_test); - num1 = num1 + 10 ; - printk(KERN_ALERT "L1(after change) : data variable addr = 0x%p, data value is %d\n", &num1, num1); - return ; + pr_alert("L1(before change) : data variable addr = 0x%p, data value is %d\n", &num1, num1); + pr_alert("L1 : code function addr = 0x%p\n", kgdb_l1_test); + num1 = num1 + 10; + pr_alert("L1(after change) : data variable addr = 0x%p, data value is %d\n", &num1, num1); } #endif @@ -42,11 +42,10 @@ void kgdb_l2_test(void) __attribute__((l2)); void kgdb_l2_test(void) { - printk(KERN_ALERT "L2(before change) : data variable addr = 0x%p, data value is %d\n", &num2, num2); - printk(KERN_ALERT "L2 : code function addr = 0x%p\n", kgdb_l2_test); - num2 = num2 + 20 ; - printk(KERN_ALERT "L2(after change) : data variable addr = 0x%p, data value is %d\n", &num2, num2); - return ; + pr_alert("L2(before change) : data variable addr = 0x%p, data value is %d\n", &num2, num2); + pr_alert("L2 : code function addr = 0x%p\n", kgdb_l2_test); + num2 = num2 + 20; + pr_alert("L2(after change) : data variable addr = 0x%p, data value is %d\n", &num2, num2); } #endif @@ -54,12 +53,14 @@ void kgdb_l2_test(void) int kgdb_test(char *name, int len, int count, int z) { - printk(KERN_ALERT "kgdb name(%d): %s, %d, %d\n", len, name, count, z); + pr_alert("kgdb name(%d): %s, %d, %d\n", len, name, count, z); count = z; return count; } -static int test_proc_output(char *buf) +static ssize_t +kgdb_test_proc_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) { kgdb_test("hello world!", 12, 0x55, 0x10); #ifndef CONFIG_SMP @@ -72,49 +73,31 @@ static int test_proc_output(char *buf) return 0; } -static int test_read_proc(char *page, char **start, off_t off, - int count, int *eof, void *data) +static ssize_t +kgdb_test_proc_write(struct file *file, const char __user *buffer, + size_t count, loff_t *pos) { - int len; - - len = test_proc_output(page); - if (len <= off+count) - *eof = 1; - *start = page + off; - len -= off; - if (len > count) - len = count; - if (len < 0) - len = 0; - return len; -} - -static int test_write_proc(struct file *file, const char *buffer, - unsigned long count, void *data) -{ - if (count >= 256) - len = 255; - else - len = count; - + len = min_t(size_t, 255, count); memcpy(cmdline, buffer, count); cmdline[len] = 0; return len; } +static const struct file_operations kgdb_test_proc_fops = { + .owner = THIS_MODULE, + .read = kgdb_test_proc_read, + .write = kgdb_test_proc_write, +}; + static int __init kgdbtest_init(void) { struct proc_dir_entry *entry; - entry = create_proc_entry("kgdbtest", 0, NULL); + entry = proc_create("kgdbtest", 0, NULL, &kgdb_test_proc_fops); if (entry == NULL) return -ENOMEM; - entry->read_proc = test_read_proc; - entry->write_proc = test_write_proc; - entry->data = NULL; - return 0; } diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c index 4587642..b56b0e4 100644 --- a/arch/blackfin/kernel/process.c +++ b/arch/blackfin/kernel/process.c @@ -258,9 +258,12 @@ void finish_atomic_sections (struct pt_regs *regs) int __user *up0 = (int __user *)regs->p0; switch (regs->pc) { + default: + /* not in middle of an atomic step, so resume like normal */ + return; + case ATOMIC_XCHG32 + 2: put_user(regs->r1, up0); - regs->pc = ATOMIC_XCHG32 + 4; break; case ATOMIC_CAS32 + 2: @@ -268,7 +271,6 @@ void finish_atomic_sections (struct pt_regs *regs) if (regs->r0 == regs->r1) case ATOMIC_CAS32 + 6: put_user(regs->r2, up0); - regs->pc = ATOMIC_CAS32 + 8; break; case ATOMIC_ADD32 + 2: @@ -276,7 +278,6 @@ void finish_atomic_sections (struct pt_regs *regs) /* fall through */ case ATOMIC_ADD32 + 4: put_user(regs->r0, up0); - regs->pc = ATOMIC_ADD32 + 6; break; case ATOMIC_SUB32 + 2: @@ -284,7 +285,6 @@ void finish_atomic_sections (struct pt_regs *regs) /* fall through */ case ATOMIC_SUB32 + 4: put_user(regs->r0, up0); - regs->pc = ATOMIC_SUB32 + 6; break; case ATOMIC_IOR32 + 2: @@ -292,7 +292,6 @@ void finish_atomic_sections (struct pt_regs *regs) /* fall through */ case ATOMIC_IOR32 + 4: put_user(regs->r0, up0); - regs->pc = ATOMIC_IOR32 + 6; break; case ATOMIC_AND32 + 2: @@ -300,7 +299,6 @@ void finish_atomic_sections (struct pt_regs *regs) /* fall through */ case ATOMIC_AND32 + 4: put_user(regs->r0, up0); - regs->pc = ATOMIC_AND32 + 6; break; case ATOMIC_XOR32 + 2: @@ -308,9 +306,15 @@ void finish_atomic_sections (struct pt_regs *regs) /* fall through */ case ATOMIC_XOR32 + 4: put_user(regs->r0, up0); - regs->pc = ATOMIC_XOR32 + 6; break; } + + /* + * We've finished the atomic section, and the only thing left for + * userspace is to do a RTS, so we might as well handle that too + * since we need to update the PC anyways. + */ + regs->pc = regs->rets; } static inline @@ -332,12 +336,58 @@ int in_mem_const(unsigned long addr, unsigned long size, { return in_mem_const_off(addr, size, 0, const_addr, const_size); } -#define IN_ASYNC(bnum, bctlnum) \ +#define ASYNC_ENABLED(bnum, bctlnum) \ ({ \ - (bfin_read_EBIU_AMGCTL() & 0xe) < ((bnum + 1) << 1) ? -EFAULT : \ - bfin_read_EBIU_AMBCTL##bctlnum() & B##bnum##RDYEN ? -EFAULT : \ - BFIN_MEM_ACCESS_CORE; \ + (bfin_read_EBIU_AMGCTL() & 0xe) < ((bnum + 1) << 1) ? 0 : \ + bfin_read_EBIU_AMBCTL##bctlnum() & B##bnum##RDYEN ? 0 : \ + 1; \ }) +/* + * We can't read EBIU banks that aren't enabled or we end up hanging + * on the access to the async space. Make sure we validate accesses + * that cross async banks too. + * 0 - found, but unusable + * 1 - found & usable + * 2 - not found + */ +static +int in_async(unsigned long addr, unsigned long size) +{ + if (addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK0_BASE + ASYNC_BANK0_SIZE) { + if (!ASYNC_ENABLED(0, 0)) + return 0; + if (addr + size <= ASYNC_BANK0_BASE + ASYNC_BANK0_SIZE) + return 1; + size -= ASYNC_BANK0_BASE + ASYNC_BANK0_SIZE - addr; + addr = ASYNC_BANK0_BASE + ASYNC_BANK0_SIZE; + } + if (addr >= ASYNC_BANK1_BASE && addr < ASYNC_BANK1_BASE + ASYNC_BANK1_SIZE) { + if (!ASYNC_ENABLED(1, 0)) + return 0; + if (addr + size <= ASYNC_BANK1_BASE + ASYNC_BANK1_SIZE) + return 1; + size -= ASYNC_BANK1_BASE + ASYNC_BANK1_SIZE - addr; + addr = ASYNC_BANK1_BASE + ASYNC_BANK1_SIZE; + } + if (addr >= ASYNC_BANK2_BASE && addr < ASYNC_BANK2_BASE + ASYNC_BANK2_SIZE) { + if (!ASYNC_ENABLED(2, 1)) + return 0; + if (addr + size <= ASYNC_BANK2_BASE + ASYNC_BANK2_SIZE) + return 1; + size -= ASYNC_BANK2_BASE + ASYNC_BANK2_SIZE - addr; + addr = ASYNC_BANK2_BASE + ASYNC_BANK2_SIZE; + } + if (addr >= ASYNC_BANK3_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE) { + if (ASYNC_ENABLED(3, 1)) + return 0; + if (addr + size <= ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE) + return 1; + return 0; + } + + /* not within async bounds */ + return 2; +} int bfin_mem_access_type(unsigned long addr, unsigned long size) { @@ -374,17 +424,11 @@ int bfin_mem_access_type(unsigned long addr, unsigned long size) if (addr >= SYSMMR_BASE) return BFIN_MEM_ACCESS_CORE_ONLY; - /* We can't read EBIU banks that aren't enabled or we end up hanging - * on the access to the async space. - */ - if (in_mem_const(addr, size, ASYNC_BANK0_BASE, ASYNC_BANK0_SIZE)) - return IN_ASYNC(0, 0); - if (in_mem_const(addr, size, ASYNC_BANK1_BASE, ASYNC_BANK1_SIZE)) - return IN_ASYNC(1, 0); - if (in_mem_const(addr, size, ASYNC_BANK2_BASE, ASYNC_BANK2_SIZE)) - return IN_ASYNC(2, 1); - if (in_mem_const(addr, size, ASYNC_BANK3_BASE, ASYNC_BANK3_SIZE)) - return IN_ASYNC(3, 1); + switch (in_async(addr, size)) { + case 0: return -EFAULT; + case 1: return BFIN_MEM_ACCESS_CORE; + case 2: /* fall through */; + } if (in_mem_const(addr, size, BOOT_ROM_START, BOOT_ROM_LENGTH)) return BFIN_MEM_ACCESS_CORE; @@ -401,6 +445,8 @@ __attribute__((l1_text)) /* Return 1 if access to memory range is OK, 0 otherwise */ int _access_ok(unsigned long addr, unsigned long size) { + int aret; + if (size == 0) return 1; /* Check that things do not wrap around */ @@ -450,6 +496,11 @@ int _access_ok(unsigned long addr, unsigned long size) if (in_mem_const(addr, size, COREB_L1_DATA_B_START, COREB_L1_DATA_B_LENGTH)) return 1; #endif + + aret = in_async(addr, size); + if (aret < 2) + return aret; + if (in_mem_const_off(addr, size, _ebss_l2 - _stext_l2, L2_START, L2_LENGTH)) return 1; diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c index 56b0ba1..65567dc 100644 --- a/arch/blackfin/kernel/ptrace.c +++ b/arch/blackfin/kernel/ptrace.c @@ -316,19 +316,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) case BFIN_MEM_ACCESS_CORE_ONLY: copied = access_process_vm(child, addr, &data, to_copy, 1); - if (copied) - break; - - /* hrm, why didn't that work ... maybe no mapping */ - if (addr >= FIXED_CODE_START && - addr + to_copy <= FIXED_CODE_END) { - copy_to_user_page(0, 0, 0, paddr, &data, to_copy); - copied = to_copy; - } else if (addr >= BOOT_ROM_START) { - memcpy(paddr, &data, to_copy); - copied = to_copy; - } - break; case BFIN_MEM_ACCESS_DMA: if (safe_dma_memcpy(paddr, &data, to_copy)) diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index c202a44..95448ae 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -178,10 +178,10 @@ void __init bfin_cache_init(void) void __init bfin_relocate_l1_mem(void) { - unsigned long l1_code_length; - unsigned long l1_data_a_length; - unsigned long l1_data_b_length; - unsigned long l2_length; + unsigned long text_l1_len = (unsigned long)_text_l1_len; + unsigned long data_l1_len = (unsigned long)_data_l1_len; + unsigned long data_b_l1_len = (unsigned long)_data_b_l1_len; + unsigned long l2_len = (unsigned long)_l2_len; early_shadow_stamp(); @@ -201,30 +201,23 @@ void __init bfin_relocate_l1_mem(void) blackfin_dma_early_init(); - /* if necessary, copy _stext_l1 to _etext_l1 to L1 instruction SRAM */ - l1_code_length = _etext_l1 - _stext_l1; - if (l1_code_length) - early_dma_memcpy(_stext_l1, _l1_lma_start, l1_code_length); + /* if necessary, copy L1 text to L1 instruction SRAM */ + if (L1_CODE_LENGTH && text_l1_len) + early_dma_memcpy(_stext_l1, _text_l1_lma, text_l1_len); - /* if necessary, copy _sdata_l1 to _sbss_l1 to L1 data bank A SRAM */ - l1_data_a_length = _sbss_l1 - _sdata_l1; - if (l1_data_a_length) - early_dma_memcpy(_sdata_l1, _l1_lma_start + l1_code_length, l1_data_a_length); + /* if necessary, copy L1 data to L1 data bank A SRAM */ + if (L1_DATA_A_LENGTH && data_l1_len) + early_dma_memcpy(_sdata_l1, _data_l1_lma, data_l1_len); - /* if necessary, copy _sdata_b_l1 to _sbss_b_l1 to L1 data bank B SRAM */ - l1_data_b_length = _sbss_b_l1 - _sdata_b_l1; - if (l1_data_b_length) - early_dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length + - l1_data_a_length, l1_data_b_length); + /* if necessary, copy L1 data B to L1 data bank B SRAM */ + if (L1_DATA_B_LENGTH && data_b_l1_len) + early_dma_memcpy(_sdata_b_l1, _data_b_l1_lma, data_b_l1_len); early_dma_memcpy_done(); - /* if necessary, copy _stext_l2 to _edata_l2 to L2 SRAM */ - if (L2_LENGTH != 0) { - l2_length = _sbss_l2 - _stext_l2; - if (l2_length) - memcpy(_stext_l2, _l2_lma_start, l2_length); - } + /* if necessary, copy L2 text/data to L2 SRAM */ + if (L2_LENGTH && l2_len) + memcpy(_stext_l2, _l2_lma, l2_len); } /* add_memory_region to memmap */ @@ -608,11 +601,6 @@ static __init void memory_setup(void) page_mask_order = get_order(3 * page_mask_nelts * sizeof(long)); #endif -#if !defined(CONFIG_MTD_UCLINUX) - /*In case there is no valid CPLB behind memory_end make sure we don't get to close*/ - memory_end -= SIZE_4K; -#endif - init_mm.start_code = (unsigned long)_stext; init_mm.end_code = (unsigned long)_etext; init_mm.end_data = (unsigned long)_edata; @@ -917,7 +905,7 @@ void __init setup_arch(char **cmdline_p) printk(KERN_INFO "Blackfin support (C) 2004-2009 Analog Devices, Inc.\n"); if (bfin_compiled_revid() == 0xffff) - printk(KERN_INFO "Compiled for ADSP-%s Rev any\n", CPU); + printk(KERN_INFO "Compiled for ADSP-%s Rev any, running on 0.%d\n", CPU, bfin_revid()); else if (bfin_compiled_revid() == -1) printk(KERN_INFO "Compiled for ADSP-%s Rev none\n", CPU); else diff --git a/arch/blackfin/kernel/signal.c b/arch/blackfin/kernel/signal.c index 9d90c18..e0fd63e 100644 --- a/arch/blackfin/kernel/signal.c +++ b/arch/blackfin/kernel/signal.c @@ -12,6 +12,7 @@ #include <linux/binfmts.h> #include <linux/freezer.h> #include <linux/uaccess.h> +#include <linux/tracehook.h> #include <asm/cacheflush.h> #include <asm/ucontext.h> @@ -332,3 +333,20 @@ asmlinkage void do_signal(struct pt_regs *regs) sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); } } + +/* + * notification of userspace execution resumption + */ +asmlinkage void do_notify_resume(struct pt_regs *regs) +{ + if (test_thread_flag(TIF_SIGPENDING) || test_thread_flag(TIF_RESTORE_SIGMASK)) + do_signal(regs); + + if (test_thread_flag(TIF_NOTIFY_RESUME)) { + clear_thread_flag(TIF_NOTIFY_RESUME); + tracehook_notify_resume(regs); + if (current->replacement_session_keyring) + key_replace_session_keyring(); + } +} + diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c index 359cfb1..17c38c5 100644 --- a/arch/blackfin/kernel/time-ts.c +++ b/arch/blackfin/kernel/time-ts.c @@ -22,8 +22,6 @@ #include <asm/time.h> #include <asm/gptimers.h> -#if defined(CONFIG_CYCLES_CLOCKSOURCE) - /* Accelerators for sched_clock() * convert from cycles(64bits) => nanoseconds (64bits) * basic equation: @@ -46,20 +44,11 @@ * -johnstul@us.ibm.com "math is hard, lets go shopping!" */ -static unsigned long cyc2ns_scale; #define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */ -static inline void set_cyc2ns_scale(unsigned long cpu_khz) -{ - cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR) / cpu_khz; -} - -static inline unsigned long long cycles_2_ns(cycle_t cyc) -{ - return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR; -} +#if defined(CONFIG_CYCLES_CLOCKSOURCE) -static cycle_t bfin_read_cycles(struct clocksource *cs) +static notrace cycle_t bfin_read_cycles(struct clocksource *cs) { return __bfin_cycles_off + (get_cycles() << __bfin_cycles_mod); } @@ -69,19 +58,18 @@ static struct clocksource bfin_cs_cycles = { .rating = 400, .read = bfin_read_cycles, .mask = CLOCKSOURCE_MASK(64), - .shift = 22, + .shift = CYC2NS_SCALE_FACTOR, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -unsigned long long sched_clock(void) +static inline unsigned long long bfin_cs_cycles_sched_clock(void) { - return cycles_2_ns(bfin_read_cycles(&bfin_cs_cycles)); + return clocksource_cyc2ns(bfin_read_cycles(&bfin_cs_cycles), + bfin_cs_cycles.mult, bfin_cs_cycles.shift); } static int __init bfin_cs_cycles_init(void) { - set_cyc2ns_scale(get_cclk() / 1000); - bfin_cs_cycles.mult = \ clocksource_hz2mult(get_cclk(), bfin_cs_cycles.shift); @@ -108,7 +96,7 @@ void __init setup_gptimer0(void) enable_gptimers(TIMER0bit); } -static cycle_t bfin_read_gptimer0(void) +static cycle_t bfin_read_gptimer0(struct clocksource *cs) { return bfin_read_TIMER0_COUNTER(); } @@ -118,10 +106,16 @@ static struct clocksource bfin_cs_gptimer0 = { .rating = 350, .read = bfin_read_gptimer0, .mask = CLOCKSOURCE_MASK(32), - .shift = 22, + .shift = CYC2NS_SCALE_FACTOR, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; +static inline unsigned long long bfin_cs_gptimer0_sched_clock(void) +{ + return clocksource_cyc2ns(bfin_read_TIMER0_COUNTER(), + bfin_cs_gptimer0.mult, bfin_cs_gptimer0.shift); +} + static int __init bfin_cs_gptimer0_init(void) { setup_gptimer0(); @@ -138,6 +132,19 @@ static int __init bfin_cs_gptimer0_init(void) # define bfin_cs_gptimer0_init() #endif + +#if defined(CONFIG_GPTMR0_CLOCKSOURCE) || defined(CONFIG_CYCLES_CLOCKSOURCE) +/* prefer to use cycles since it has higher rating */ +notrace unsigned long long sched_clock(void) +{ +#if defined(CONFIG_CYCLES_CLOCKSOURCE) + return bfin_cs_cycles_sched_clock(); +#else + return bfin_cs_gptimer0_sched_clock(); +#endif +} +#endif + #ifdef CONFIG_CORE_TIMER_IRQ_L1 __attribute__((l1_text)) #endif diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c index bd3b53d..13c1ee3 100644 --- a/arch/blackfin/kernel/time.c +++ b/arch/blackfin/kernel/time.c @@ -184,11 +184,3 @@ void __init time_init(void) time_sched_init(timer_interrupt); } - -/* - * Scheduler clock - returns current time in nanosec units. - */ -unsigned long long sched_clock(void) -{ - return (unsigned long long)jiffies *(NSEC_PER_SEC / HZ); -} diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 9636bac..d3cbcd6 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -119,6 +119,15 @@ static void decode_address(char *buf, unsigned long address) return; } + /* + * Don't walk any of the vmas if we are oopsing, it has been known + * to cause problems - corrupt vmas (kernel crashes) cause double faults + */ + if (oops_in_progress) { + strcat(buf, "/* kernel dynamic memory (maybe user-space) */"); + return; + } + /* looks like we're off in user-land, so let's walk all the * mappings of all our processes and see if we can't be a whee * bit more specific @@ -515,6 +524,36 @@ asmlinkage notrace void trap_c(struct pt_regs *fp) break; /* External Memory Addressing Error */ case (SEQSTAT_HWERRCAUSE_EXTERN_ADDR): + if (ANOMALY_05000310) { + static unsigned long anomaly_rets; + + if ((fp->pc >= (L1_CODE_START + L1_CODE_LENGTH - 512)) && + (fp->pc < (L1_CODE_START + L1_CODE_LENGTH))) { + /* + * A false hardware error will happen while fetching at + * the L1 instruction SRAM boundary. Ignore it. + */ + anomaly_rets = fp->rets; + goto traps_done; + } else if (fp->rets == anomaly_rets) { + /* + * While boundary code returns to a function, at the ret + * point, a new false hardware error might occur too based + * on tests. Ignore it too. + */ + goto traps_done; + } else if ((fp->rets >= (L1_CODE_START + L1_CODE_LENGTH - 512)) && + (fp->rets < (L1_CODE_START + L1_CODE_LENGTH))) { + /* + * If boundary code calls a function, at the entry point, + * a new false hardware error maybe happen based on tests. + * Ignore it too. + */ + goto traps_done; + } else + anomaly_rets = 0; + } + info.si_code = BUS_ADRERR; sig = SIGBUS; strerror = KERN_NOTICE HWC_x3(KERN_NOTICE); @@ -976,12 +1015,12 @@ void dump_bfin_process(struct pt_regs *fp) !((unsigned long)current & 0x3) && current->pid) { verbose_printk(KERN_NOTICE "CURRENT PROCESS:\n"); if (current->comm >= (char *)FIXED_CODE_START) - verbose_printk(KERN_NOTICE "COMM=%s PID=%d\n", + verbose_printk(KERN_NOTICE "COMM=%s PID=%d", current->comm, current->pid); else - verbose_printk(KERN_NOTICE "COMM= invalid\n"); + verbose_printk(KERN_NOTICE "COMM= invalid"); - printk(KERN_NOTICE "CPU = %d\n", current_thread_info()->cpu); + printk(KERN_CONT " CPU=%d\n", current_thread_info()->cpu); if (!((unsigned long)current->mm & 0x3) && (unsigned long)current->mm >= FIXED_CODE_START) verbose_printk(KERN_NOTICE "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n" diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S index f39707c..66799e7 100644 --- a/arch/blackfin/kernel/vmlinux.lds.S +++ b/arch/blackfin/kernel/vmlinux.lds.S @@ -121,8 +121,6 @@ SECTIONS EXIT_DATA } - __l1_lma_start = .; - .text_l1 L1_CODE_START : AT(LOADADDR(.exit.data) + SIZEOF(.exit.data)) { . = ALIGN(4); @@ -134,9 +132,11 @@ SECTIONS . = ALIGN(4); __etext_l1 = .; } - ASSERT (SIZEOF(.text_l1) <= L1_CODE_LENGTH, "L1 text overflow!") + __text_l1_lma = LOADADDR(.text_l1); + __text_l1_len = SIZEOF(.text_l1); + ASSERT (__text_l1_len <= L1_CODE_LENGTH, "L1 text overflow!") - .data_l1 L1_DATA_A_START : AT(LOADADDR(.text_l1) + SIZEOF(.text_l1)) + .data_l1 L1_DATA_A_START : AT(__text_l1_lma + __text_l1_len) { . = ALIGN(4); __sdata_l1 = .; @@ -152,9 +152,11 @@ SECTIONS . = ALIGN(4); __ebss_l1 = .; } - ASSERT (SIZEOF(.data_l1) <= L1_DATA_A_LENGTH, "L1 data A overflow!") + __data_l1_lma = LOADADDR(.data_l1); + __data_l1_len = SIZEOF(.data_l1); + ASSERT (__data_l1_len <= L1_DATA_A_LENGTH, "L1 data A overflow!") - .data_b_l1 L1_DATA_B_START : AT(LOADADDR(.data_l1) + SIZEOF(.data_l1)) + .data_b_l1 L1_DATA_B_START : AT(__data_l1_lma + __data_l1_len) { . = ALIGN(4); __sdata_b_l1 = .; @@ -167,11 +169,11 @@ SECTIONS . = ALIGN(4); __ebss_b_l1 = .; } - ASSERT (SIZEOF(.data_b_l1) <= L1_DATA_B_LENGTH, "L1 data B overflow!") - - __l2_lma_start = LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1); + __data_b_l1_lma = LOADADDR(.data_b_l1); + __data_b_l1_len = SIZEOF(.data_b_l1); + ASSERT (__data_b_l1_len <= L1_DATA_B_LENGTH, "L1 data B overflow!") - .text_data_l2 L2_START : AT(LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1)) + .text_data_l2 L2_START : AT(__data_b_l1_lma + __data_b_l1_len) { . = ALIGN(4); __stext_l2 = .; @@ -193,12 +195,14 @@ SECTIONS . = ALIGN(4); __ebss_l2 = .; } - ASSERT (SIZEOF(.text_data_l2) <= L2_LENGTH, "L2 overflow!") + __l2_lma = LOADADDR(.text_data_l2); + __l2_len = SIZEOF(.text_data_l2); + ASSERT (__l2_len <= L2_LENGTH, "L2 overflow!") /* Force trailing alignment of our init section so that when we * free our init memory, we don't leave behind a partial page. */ - . = LOADADDR(.text_data_l2) + SIZEOF(.text_data_l2); + . = __l2_lma + __l2_len; . = ALIGN(PAGE_SIZE); ___init_end = .; diff --git a/arch/blackfin/lib/Makefile b/arch/blackfin/lib/Makefile index 635288f..42c47dc 100644 --- a/arch/blackfin/lib/Makefile +++ b/arch/blackfin/lib/Makefile @@ -5,7 +5,7 @@ lib-y := \ ashldi3.o ashrdi3.o lshrdi3.o \ muldi3.o divsi3.o udivsi3.o modsi3.o umodsi3.o \ - checksum.o memcpy.o memset.o memcmp.o memchr.o memmove.o \ + memcpy.o memset.o memcmp.o memchr.o memmove.o \ strcmp.o strcpy.o strncmp.o strncpy.o \ umulsi3_highpart.o smulsi3_highpart.o \ ins.o outs.o diff --git a/arch/blackfin/lib/checksum.c b/arch/blackfin/lib/checksum.c deleted file mode 100644 index c62969d..0000000 --- a/arch/blackfin/lib/checksum.c +++ /dev/null @@ -1,125 +0,0 @@ -/* - * Copyright 2004-2009 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - * - * An implementation of the TCP/IP protocol suite for the LINUX operating - * system. INET is implemented using the BSD Socket interface as the - * means of communication with the user level. - * - */ - -#include <linux/module.h> -#include <net/checksum.h> -#include <asm/checksum.h> - -#ifdef CONFIG_IP_CHECKSUM_L1 -static unsigned short do_csum(const unsigned char *buff, int len)__attribute__((l1_text)); -#endif - -static unsigned short do_csum(const unsigned char *buff, int len) -{ - register unsigned long sum = 0; - int swappem = 0; - - if (1 & (unsigned long)buff) { - sum = *buff << 8; - buff++; - len--; - ++swappem; - } - - while (len > 1) { - sum += *(unsigned short *)buff; - buff += 2; - len -= 2; - } - - if (len > 0) - sum += *buff; - - /* Fold 32-bit sum to 16 bits */ - while (sum >> 16) - sum = (sum & 0xffff) + (sum >> 16); - - if (swappem) - sum = ((sum & 0xff00) >> 8) + ((sum & 0x00ff) << 8); - - return sum; - -} - -/* - * This is a version of ip_compute_csum() optimized for IP headers, - * which always checksum on 4 octet boundaries. - */ -__sum16 ip_fast_csum(unsigned char *iph, unsigned int ihl) -{ - return (__force __sum16)~do_csum(iph, ihl * 4); -} -EXPORT_SYMBOL(ip_fast_csum); - -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -__wsum csum_partial(const void *buff, int len, __wsum sum) -{ - /* - * Just in case we get nasty checksum data... - * Like 0xffff6ec3 in the case of our IPv6 multicast header. - * We fold to begin with, as well as at the end. - */ - sum = (sum & 0xffff) + (sum >> 16); - - sum += do_csum(buff, len); - - sum = (sum & 0xffff) + (sum >> 16); - - return sum; -} -EXPORT_SYMBOL(csum_partial); - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ -__sum16 ip_compute_csum(const void *buff, int len) -{ - return (__force __sum16)~do_csum(buff, len); -} -EXPORT_SYMBOL(ip_compute_csum); - -/* - * copy from fs while checksumming, otherwise like csum_partial - */ - -__wsum -csum_partial_copy_from_user(const void __user *src, void *dst, - int len, __wsum sum, int *csum_err) -{ - if (csum_err) - *csum_err = 0; - memcpy(dst, (__force void *)src, len); - return csum_partial(dst, len, sum); -} -EXPORT_SYMBOL(csum_partial_copy_from_user); - -/* - * copy from ds while checksumming, otherwise like csum_partial - */ - -__wsum csum_partial_copy(const void *src, void *dst, int len, __wsum sum) -{ - memcpy(dst, src, len); - return csum_partial(dst, len, sum); -} -EXPORT_SYMBOL(csum_partial_copy); diff --git a/arch/blackfin/mach-bf518/Kconfig b/arch/blackfin/mach-bf518/Kconfig index 4c76fef..4ab2d16 100644 --- a/arch/blackfin/mach-bf518/Kconfig +++ b/arch/blackfin/mach-bf518/Kconfig @@ -1,3 +1,7 @@ +config BF51x + def_bool y + depends on (BF512 || BF514 || BF516 || BF518) + if (BF51x) source "arch/blackfin/mach-bf518/boards/Kconfig" diff --git a/arch/blackfin/mach-bf518/include/mach/blackfin.h b/arch/blackfin/mach-bf518/include/mach/blackfin.h index 6cfb246..9053462 100644 --- a/arch/blackfin/mach-bf518/include/mach/blackfin.h +++ b/arch/blackfin/mach-bf518/include/mach/blackfin.h @@ -58,10 +58,4 @@ #define OFFSET_SCR 0x1C /* SCR Scratch Register */ #define OFFSET_GCTL 0x24 /* Global Control Register */ -/* PLL_DIV Masks */ -#define CCLK_DIV1 CSEL_DIV1 /* CCLK = VCO / 1 */ -#define CCLK_DIV2 CSEL_DIV2 /* CCLK = VCO / 2 */ -#define CCLK_DIV4 CSEL_DIV4 /* CCLK = VCO / 4 */ -#define CCLK_DIV8 CSEL_DIV8 /* CCLK = VCO / 8 */ - #endif diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF514.h b/arch/blackfin/mach-bf518/include/mach/cdefBF514.h index e1d9991..108fa4b 100644 --- a/arch/blackfin/mach-bf518/include/mach/cdefBF514.h +++ b/arch/blackfin/mach-bf518/include/mach/cdefBF514.h @@ -1,7 +1,7 @@ /* * Copyright 2008-2009 Analog Devices Inc. * - * Licensed under the GPL-2 or later + * Licensed under the ADI BSD license or the GPL-2 (or later) */ #ifndef _CDEF_BF514_H @@ -10,15 +10,8 @@ /* include all Core registers and bit definitions */ #include "defBF514.h" -/* include core specific register pointer definitions */ -#include <asm/cdef_LPBlackfin.h> - -/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF514 */ - -/* include cdefBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */ -#include "cdefBF51x_base.h" - -/* The following are the #defines needed by ADSP-BF514 that are not in the common header */ +/* BF514 is BF512 + RSI */ +#include "cdefBF512.h" /* Removable Storage Interface Registers */ diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF516.h b/arch/blackfin/mach-bf518/include/mach/cdefBF516.h index 6b364ed..2751592 100644 --- a/arch/blackfin/mach-bf518/include/mach/cdefBF516.h +++ b/arch/blackfin/mach-bf518/include/mach/cdefBF516.h @@ -1,7 +1,7 @@ /* * Copyright 2008-2009 Analog Devices Inc. * - * Licensed under the GPL-2 or later + * Licensed under the ADI BSD license or the GPL-2 (or later) */ #ifndef _CDEF_BF516_H @@ -10,15 +10,8 @@ /* include all Core registers and bit definitions */ #include "defBF516.h" -/* include core specific register pointer definitions */ -#include <asm/cdef_LPBlackfin.h> - -/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF516 */ - -/* include cdefBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */ -#include "cdefBF51x_base.h" - -/* The following are the #defines needed by ADSP-BF516 that are not in the common header */ +/* BF516 is BF514 + EMAC */ +#include "cdefBF514.h" /* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */ @@ -185,71 +178,4 @@ #define bfin_read_EMAC_TXC_ABORT() bfin_read32(EMAC_TXC_ABORT) #define bfin_write_EMAC_TXC_ABORT(val) bfin_write32(EMAC_TXC_ABORT, val) -/* Removable Storage Interface Registers */ - -#define bfin_read_RSI_PWR_CTL() bfin_read16(RSI_PWR_CONTROL) -#define bfin_write_RSI_PWR_CTL(val) bfin_write16(RSI_PWR_CONTROL, val) -#define bfin_read_RSI_CLK_CTL() bfin_read16(RSI_CLK_CONTROL) -#define bfin_write_RSI_CLK_CTL(val) bfin_write16(RSI_CLK_CONTROL, val) -#define bfin_read_RSI_ARGUMENT() bfin_read32(RSI_ARGUMENT) -#define bfin_write_RSI_ARGUMENT(val) bfin_write32(RSI_ARGUMENT, val) -#define bfin_read_RSI_COMMAND() bfin_read16(RSI_COMMAND) -#define bfin_write_RSI_COMMAND(val) bfin_write16(RSI_COMMAND, val) -#define bfin_read_RSI_RESP_CMD() bfin_read16(RSI_RESP_CMD) -#define bfin_write_RSI_RESP_CMD(val) bfin_write16(RSI_RESP_CMD, val) -#define bfin_read_RSI_RESPONSE0() bfin_read32(RSI_RESPONSE0) -#define bfin_write_RSI_RESPONSE0(val) bfin_write32(RSI_RESPONSE0, val) -#define bfin_read_RSI_RESPONSE1() bfin_read32(RSI_RESPONSE1) -#define bfin_write_RSI_RESPONSE1(val) bfin_write32(RSI_RESPONSE1, val) -#define bfin_read_RSI_RESPONSE2() bfin_read32(RSI_RESPONSE2) -#define bfin_write_RSI_RESPONSE2(val) bfin_write32(RSI_RESPONSE2, val) -#define bfin_read_RSI_RESPONSE3() bfin_read32(RSI_RESPONSE3) -#define bfin_write_RSI_RESPONSE3(val) bfin_write32(RSI_RESPONSE3, val) -#define bfin_read_RSI_DATA_TIMER() bfin_read32(RSI_DATA_TIMER) -#define bfin_write_RSI_DATA_TIMER(val) bfin_write32(RSI_DATA_TIMER, val) -#define bfin_read_RSI_DATA_LGTH() bfin_read16(RSI_DATA_LGTH) -#define bfin_write_RSI_DATA_LGTH(val) bfin_write16(RSI_DATA_LGTH, val) -#define bfin_read_RSI_DATA_CTL() bfin_read16(RSI_DATA_CONTROL) -#define bfin_write_RSI_DATA_CTL(val) bfin_write16(RSI_DATA_CONTROL, val) -#define bfin_read_RSI_DATA_CNT() bfin_read16(RSI_DATA_CNT) -#define bfin_write_RSI_DATA_CNT(val) bfin_write16(RSI_DATA_CNT, val) -#define bfin_read_RSI_STATUS() bfin_read32(RSI_STATUS) -#define bfin_write_RSI_STATUS(val) bfin_write32(RSI_STATUS, val) -#define bfin_read_RSI_STATUS_CLR() bfin_read16(RSI_STATUSCL) -#define bfin_write_RSI_STATUS_CLR(val) bfin_write16(RSI_STATUSCL, val) -#define bfin_read_RSI_MASK0() bfin_read32(RSI_MASK0) -#define bfin_write_RSI_MASK0(val) bfin_write32(RSI_MASK0, val) -#define bfin_read_RSI_MASK1() bfin_read32(RSI_MASK1) -#define bfin_write_RSI_MASK1(val) bfin_write32(RSI_MASK1, val) -#define bfin_read_RSI_FIFO_CNT() bfin_read16(RSI_FIFO_CNT) -#define bfin_write_RSI_FIFO_CNT(val) bfin_write16(RSI_FIFO_CNT, val) -#define bfin_read_RSI_CEATA_CTL() bfin_read16(RSI_CEATA_CONTROL) -#define bfin_write_RSI_CEATA_CTL(val) bfin_write16(RSI_CEATA_CONTROL, val) -#define bfin_read_RSI_FIFO() bfin_read32(RSI_FIFO) -#define bfin_write_RSI_FIFO(val) bfin_write32(RSI_FIFO, val) -#define bfin_read_RSI_E_STATUS() bfin_read16(RSI_ESTAT) -#define bfin_write_RSI_E_STATUS(val) bfin_write16(RSI_ESTAT, val) -#define bfin_read_RSI_E_MASK() bfin_read16(RSI_EMASK) -#define bfin_write_RSI_E_MASK(val) bfin_write16(RSI_EMASK, val) -#define bfin_read_RSI_CFG() bfin_read16(RSI_CONFIG) -#define bfin_write_RSI_CFG(val) bfin_write16(RSI_CONFIG, val) -#define bfin_read_RSI_RD_WAIT_EN() bfin_read16(RSI_RD_WAIT_EN) -#define bfin_write_RSI_RD_WAIT_EN(val) bfin_write16(RSI_RD_WAIT_EN, val) -#define bfin_read_RSI_PID0() bfin_read16(RSI_PID0) -#define bfin_write_RSI_PID0(val) bfin_write16(RSI_PID0, val) -#define bfin_read_RSI_PID1() bfin_read16(RSI_PID1) -#define bfin_write_RSI_PID1(val) bfin_write16(RSI_PID1, val) -#define bfin_read_RSI_PID2() bfin_read16(RSI_PID2) -#define bfin_write_RSI_PID2(val) bfin_write16(RSI_PID2, val) -#define bfin_read_RSI_PID3() bfin_read16(RSI_PID3) -#define bfin_write_RSI_PID3(val) bfin_write16(RSI_PID3, val) -#define bfin_read_RSI_PID4() bfin_read16(RSI_PID4) -#define bfin_write_RSI_PID4(val) bfin_write16(RSI_PID4, val) -#define bfin_read_RSI_PID5() bfin_read16(RSI_PID5) -#define bfin_write_RSI_PID5(val) bfin_write16(RSI_PID5, val) -#define bfin_read_RSI_PID6() bfin_read16(RSI_PID6) -#define bfin_write_RSI_PID6(val) bfin_write16(RSI_PID6, val) -#define bfin_read_RSI_PID7() bfin_read16(RSI_PID7) -#define bfin_write_RSI_PID7(val) bfin_write16(RSI_PID7, val) - #endif /* _CDEF_BF516_H */ diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF518.h b/arch/blackfin/mach-bf518/include/mach/cdefBF518.h index 929b906..7fb7f0e 100644 --- a/arch/blackfin/mach-bf518/include/mach/cdefBF518.h +++ b/arch/blackfin/mach-bf518/include/mach/cdefBF518.h @@ -1,7 +1,7 @@ /* * Copyright 2008-2009 Analog Devices Inc. * - * Licensed under the GPL-2 or later + * Licensed under the ADI BSD license or the GPL-2 (or later) */ #ifndef _CDEF_BF518_H @@ -10,181 +10,10 @@ /* include all Core registers and bit definitions */ #include "defBF518.h" -/* include core specific register pointer definitions */ -#include <asm/cdef_LPBlackfin.h> +/* BF518 is BF516 + IEEE-1588 */ +#include "cdefBF516.h" -/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF518 */ - -/* include cdefBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */ -#include "cdefBF51x_base.h" - -/* The following are the #defines needed by ADSP-BF518 that are not in the common header */ - - -/* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */ - -#define bfin_read_EMAC_OPMODE() bfin_read32(EMAC_OPMODE) -#define bfin_write_EMAC_OPMODE(val) bfin_write32(EMAC_OPMODE, val) -#define bfin_read_EMAC_ADDRLO() bfin_read32(EMAC_ADDRLO) -#define bfin_write_EMAC_ADDRLO(val) bfin_write32(EMAC_ADDRLO, val) -#define bfin_read_EMAC_ADDRHI() bfin_read32(EMAC_ADDRHI) -#define bfin_write_EMAC_ADDRHI(val) bfin_write32(EMAC_ADDRHI, val) -#define bfin_read_EMAC_HASHLO() bfin_read32(EMAC_HASHLO) -#define bfin_write_EMAC_HASHLO(val) bfin_write32(EMAC_HASHLO, val) -#define bfin_read_EMAC_HASHHI() bfin_read32(EMAC_HASHHI) -#define bfin_write_EMAC_HASHHI(val) bfin_write32(EMAC_HASHHI, val) -#define bfin_read_EMAC_STAADD() bfin_read32(EMAC_STAADD) -#define bfin_write_EMAC_STAADD(val) bfin_write32(EMAC_STAADD, val) -#define bfin_read_EMAC_STADAT() bfin_read32(EMAC_STADAT) -#define bfin_write_EMAC_STADAT(val) bfin_write32(EMAC_STADAT, val) -#define bfin_read_EMAC_FLC() bfin_read32(EMAC_FLC) -#define bfin_write_EMAC_FLC(val) bfin_write32(EMAC_FLC, val) -#define bfin_read_EMAC_VLAN1() bfin_read32(EMAC_VLAN1) -#define bfin_write_EMAC_VLAN1(val) bfin_write32(EMAC_VLAN1, val) -#define bfin_read_EMAC_VLAN2() bfin_read32(EMAC_VLAN2) -#define bfin_write_EMAC_VLAN2(val) bfin_write32(EMAC_VLAN2, val) -#define bfin_read_EMAC_WKUP_CTL() bfin_read32(EMAC_WKUP_CTL) -#define bfin_write_EMAC_WKUP_CTL(val) bfin_write32(EMAC_WKUP_CTL, val) -#define bfin_read_EMAC_WKUP_FFMSK0() bfin_read32(EMAC_WKUP_FFMSK0) -#define bfin_write_EMAC_WKUP_FFMSK0(val) bfin_write32(EMAC_WKUP_FFMSK0, val) -#define bfin_read_EMAC_WKUP_FFMSK1() bfin_read32(EMAC_WKUP_FFMSK1) -#define bfin_write_EMAC_WKUP_FFMSK1(val) bfin_write32(EMAC_WKUP_FFMSK1, val) -#define bfin_read_EMAC_WKUP_FFMSK2() bfin_read32(EMAC_WKUP_FFMSK2) -#define bfin_write_EMAC_WKUP_FFMSK2(val) bfin_write32(EMAC_WKUP_FFMSK2, val) -#define bfin_read_EMAC_WKUP_FFMSK3() bfin_read32(EMAC_WKUP_FFMSK3) -#define bfin_write_EMAC_WKUP_FFMSK3(val) bfin_write32(EMAC_WKUP_FFMSK3, val) -#define bfin_read_EMAC_WKUP_FFCMD() bfin_read32(EMAC_WKUP_FFCMD) -#define bfin_write_EMAC_WKUP_FFCMD(val) bfin_write32(EMAC_WKUP_FFCMD, val) -#define bfin_read_EMAC_WKUP_FFOFF() bfin_read32(EMAC_WKUP_FFOFF) -#define bfin_write_EMAC_WKUP_FFOFF(val) bfin_write32(EMAC_WKUP_FFOFF, val) -#define bfin_read_EMAC_WKUP_FFCRC0() bfin_read32(EMAC_WKUP_FFCRC0) -#define bfin_write_EMAC_WKUP_FFCRC0(val) bfin_write32(EMAC_WKUP_FFCRC0, val) -#define bfin_read_EMAC_WKUP_FFCRC1() bfin_read32(EMAC_WKUP_FFCRC1) -#define bfin_write_EMAC_WKUP_FFCRC1(val) bfin_write32(EMAC_WKUP_FFCRC1, val) - -#define bfin_read_EMAC_SYSCTL() bfin_read32(EMAC_SYSCTL) -#define bfin_write_EMAC_SYSCTL(val) bfin_write32(EMAC_SYSCTL, val) -#define bfin_read_EMAC_SYSTAT() bfin_read32(EMAC_SYSTAT) -#define bfin_write_EMAC_SYSTAT(val) bfin_write32(EMAC_SYSTAT, val) -#define bfin_read_EMAC_RX_STAT() bfin_read32(EMAC_RX_STAT) -#define bfin_write_EMAC_RX_STAT(val) bfin_write32(EMAC_RX_STAT, val) -#define bfin_read_EMAC_RX_STKY() bfin_read32(EMAC_RX_STKY) -#define bfin_write_EMAC_RX_STKY(val) bfin_write32(EMAC_RX_STKY, val) -#define bfin_read_EMAC_RX_IRQE() bfin_read32(EMAC_RX_IRQE) -#define bfin_write_EMAC_RX_IRQE(val) bfin_write32(EMAC_RX_IRQE, val) -#define bfin_read_EMAC_TX_STAT() bfin_read32(EMAC_TX_STAT) -#define bfin_write_EMAC_TX_STAT(val) bfin_write32(EMAC_TX_STAT, val) -#define bfin_read_EMAC_TX_STKY() bfin_read32(EMAC_TX_STKY) -#define bfin_write_EMAC_TX_STKY(val) bfin_write32(EMAC_TX_STKY, val) -#define bfin_read_EMAC_TX_IRQE() bfin_read32(EMAC_TX_IRQE) -#define bfin_write_EMAC_TX_IRQE(val) bfin_write32(EMAC_TX_IRQE, val) - -#define bfin_read_EMAC_MMC_CTL() bfin_read32(EMAC_MMC_CTL) -#define bfin_write_EMAC_MMC_CTL(val) bfin_write32(EMAC_MMC_CTL, val) -#define bfin_read_EMAC_MMC_RIRQS() bfin_read32(EMAC_MMC_RIRQS) -#define bfin_write_EMAC_MMC_RIRQS(val) bfin_write32(EMAC_MMC_RIRQS, val) -#define bfin_read_EMAC_MMC_RIRQE() bfin_read32(EMAC_MMC_RIRQE) -#define bfin_write_EMAC_MMC_RIRQE(val) bfin_write32(EMAC_MMC_RIRQE, val) -#define bfin_read_EMAC_MMC_TIRQS() bfin_read32(EMAC_MMC_TIRQS) -#define bfin_write_EMAC_MMC_TIRQS(val) bfin_write32(EMAC_MMC_TIRQS, val) -#define bfin_read_EMAC_MMC_TIRQE() bfin_read32(EMAC_MMC_TIRQE) -#define bfin_write_EMAC_MMC_TIRQE(val) bfin_write32(EMAC_MMC_TIRQE, val) - -#define bfin_read_EMAC_RXC_OK() bfin_read32(EMAC_RXC_OK) -#define bfin_write_EMAC_RXC_OK(val) bfin_write32(EMAC_RXC_OK, val) -#define bfin_read_EMAC_RXC_FCS() bfin_read32(EMAC_RXC_FCS) -#define bfin_write_EMAC_RXC_FCS(val) bfin_write32(EMAC_RXC_FCS, val) -#define bfin_read_EMAC_RXC_ALIGN() bfin_read32(EMAC_RXC_ALIGN) -#define bfin_write_EMAC_RXC_ALIGN(val) bfin_write32(EMAC_RXC_ALIGN, val) -#define bfin_read_EMAC_RXC_OCTET() bfin_read32(EMAC_RXC_OCTET) -#define bfin_write_EMAC_RXC_OCTET(val) bfin_write32(EMAC_RXC_OCTET, val) -#define bfin_read_EMAC_RXC_DMAOVF() bfin_read32(EMAC_RXC_DMAOVF) -#define bfin_write_EMAC_RXC_DMAOVF(val) bfin_write32(EMAC_RXC_DMAOVF, val) -#define bfin_read_EMAC_RXC_UNICST() bfin_read32(EMAC_RXC_UNICST) -#define bfin_write_EMAC_RXC_UNICST(val) bfin_write32(EMAC_RXC_UNICST, val) -#define bfin_read_EMAC_RXC_MULTI() bfin_read32(EMAC_RXC_MULTI) -#define bfin_write_EMAC_RXC_MULTI(val) bfin_write32(EMAC_RXC_MULTI, val) -#define bfin_read_EMAC_RXC_BROAD() bfin_read32(EMAC_RXC_BROAD) -#define bfin_write_EMAC_RXC_BROAD(val) bfin_write32(EMAC_RXC_BROAD, val) -#define bfin_read_EMAC_RXC_LNERRI() bfin_read32(EMAC_RXC_LNERRI) -#define bfin_write_EMAC_RXC_LNERRI(val) bfin_write32(EMAC_RXC_LNERRI, val) -#define bfin_read_EMAC_RXC_LNERRO() bfin_read32(EMAC_RXC_LNERRO) -#define bfin_write_EMAC_RXC_LNERRO(val) bfin_write32(EMAC_RXC_LNERRO, val) -#define bfin_read_EMAC_RXC_LONG() bfin_read32(EMAC_RXC_LONG) -#define bfin_write_EMAC_RXC_LONG(val) bfin_write32(EMAC_RXC_LONG, val) -#define bfin_read_EMAC_RXC_MACCTL() bfin_read32(EMAC_RXC_MACCTL) -#define bfin_write_EMAC_RXC_MACCTL(val) bfin_write32(EMAC_RXC_MACCTL, val) -#define bfin_read_EMAC_RXC_OPCODE() bfin_read32(EMAC_RXC_OPCODE) -#define bfin_write_EMAC_RXC_OPCODE(val) bfin_write32(EMAC_RXC_OPCODE, val) -#define bfin_read_EMAC_RXC_PAUSE() bfin_read32(EMAC_RXC_PAUSE) -#define bfin_write_EMAC_RXC_PAUSE(val) bfin_write32(EMAC_RXC_PAUSE, val) -#define bfin_read_EMAC_RXC_ALLFRM() bfin_read32(EMAC_RXC_ALLFRM) -#define bfin_write_EMAC_RXC_ALLFRM(val) bfin_write32(EMAC_RXC_ALLFRM, val) -#define bfin_read_EMAC_RXC_ALLOCT() bfin_read32(EMAC_RXC_ALLOCT) -#define bfin_write_EMAC_RXC_ALLOCT(val) bfin_write32(EMAC_RXC_ALLOCT, val) -#define bfin_read_EMAC_RXC_TYPED() bfin_read32(EMAC_RXC_TYPED) -#define bfin_write_EMAC_RXC_TYPED(val) bfin_write32(EMAC_RXC_TYPED, val) -#define bfin_read_EMAC_RXC_SHORT() bfin_read32(EMAC_RXC_SHORT) -#define bfin_write_EMAC_RXC_SHORT(val) bfin_write32(EMAC_RXC_SHORT, val) -#define bfin_read_EMAC_RXC_EQ64() bfin_read32(EMAC_RXC_EQ64) -#define bfin_write_EMAC_RXC_EQ64(val) bfin_write32(EMAC_RXC_EQ64, val) -#define bfin_read_EMAC_RXC_LT128() bfin_read32(EMAC_RXC_LT128) -#define bfin_write_EMAC_RXC_LT128(val) bfin_write32(EMAC_RXC_LT128, val) -#define bfin_read_EMAC_RXC_LT256() bfin_read32(EMAC_RXC_LT256) -#define bfin_write_EMAC_RXC_LT256(val) bfin_write32(EMAC_RXC_LT256, val) -#define bfin_read_EMAC_RXC_LT512() bfin_read32(EMAC_RXC_LT512) -#define bfin_write_EMAC_RXC_LT512(val) bfin_write32(EMAC_RXC_LT512, val) -#define bfin_read_EMAC_RXC_LT1024() bfin_read32(EMAC_RXC_LT1024) -#define bfin_write_EMAC_RXC_LT1024(val) bfin_write32(EMAC_RXC_LT1024, val) -#define bfin_read_EMAC_RXC_GE1024() bfin_read32(EMAC_RXC_GE1024) -#define bfin_write_EMAC_RXC_GE1024(val) bfin_write32(EMAC_RXC_GE1024, val) - -#define bfin_read_EMAC_TXC_OK() bfin_read32(EMAC_TXC_OK) -#define bfin_write_EMAC_TXC_OK(val) bfin_write32(EMAC_TXC_OK, val) -#define bfin_read_EMAC_TXC_1COL() bfin_read32(EMAC_TXC_1COL) -#define bfin_write_EMAC_TXC_1COL(val) bfin_write32(EMAC_TXC_1COL, val) -#define bfin_read_EMAC_TXC_GT1COL() bfin_read32(EMAC_TXC_GT1COL) -#define bfin_write_EMAC_TXC_GT1COL(val) bfin_write32(EMAC_TXC_GT1COL, val) -#define bfin_read_EMAC_TXC_OCTET() bfin_read32(EMAC_TXC_OCTET) -#define bfin_write_EMAC_TXC_OCTET(val) bfin_write32(EMAC_TXC_OCTET, val) -#define bfin_read_EMAC_TXC_DEFER() bfin_read32(EMAC_TXC_DEFER) -#define bfin_write_EMAC_TXC_DEFER(val) bfin_write32(EMAC_TXC_DEFER, val) -#define bfin_read_EMAC_TXC_LATECL() bfin_read32(EMAC_TXC_LATECL) -#define bfin_write_EMAC_TXC_LATECL(val) bfin_write32(EMAC_TXC_LATECL, val) -#define bfin_read_EMAC_TXC_XS_COL() bfin_read32(EMAC_TXC_XS_COL) -#define bfin_write_EMAC_TXC_XS_COL(val) bfin_write32(EMAC_TXC_XS_COL, val) -#define bfin_read_EMAC_TXC_DMAUND() bfin_read32(EMAC_TXC_DMAUND) -#define bfin_write_EMAC_TXC_DMAUND(val) bfin_write32(EMAC_TXC_DMAUND, val) -#define bfin_read_EMAC_TXC_CRSERR() bfin_read32(EMAC_TXC_CRSERR) -#define bfin_write_EMAC_TXC_CRSERR(val) bfin_write32(EMAC_TXC_CRSERR, val) -#define bfin_read_EMAC_TXC_UNICST() bfin_read32(EMAC_TXC_UNICST) -#define bfin_write_EMAC_TXC_UNICST(val) bfin_write32(EMAC_TXC_UNICST, val) -#define bfin_read_EMAC_TXC_MULTI() bfin_read32(EMAC_TXC_MULTI) -#define bfin_write_EMAC_TXC_MULTI(val) bfin_write32(EMAC_TXC_MULTI, val) -#define bfin_read_EMAC_TXC_BROAD() bfin_read32(EMAC_TXC_BROAD) -#define bfin_write_EMAC_TXC_BROAD(val) bfin_write32(EMAC_TXC_BROAD, val) -#define bfin_read_EMAC_TXC_XS_DFR() bfin_read32(EMAC_TXC_XS_DFR) -#define bfin_write_EMAC_TXC_XS_DFR(val) bfin_write32(EMAC_TXC_XS_DFR, val) -#define bfin_read_EMAC_TXC_MACCTL() bfin_read32(EMAC_TXC_MACCTL) -#define bfin_write_EMAC_TXC_MACCTL(val) bfin_write32(EMAC_TXC_MACCTL, val) -#define bfin_read_EMAC_TXC_ALLFRM() bfin_read32(EMAC_TXC_ALLFRM) -#define bfin_write_EMAC_TXC_ALLFRM(val) bfin_write32(EMAC_TXC_ALLFRM, val) -#define bfin_read_EMAC_TXC_ALLOCT() bfin_read32(EMAC_TXC_ALLOCT) -#define bfin_write_EMAC_TXC_ALLOCT(val) bfin_write32(EMAC_TXC_ALLOCT, val) -#define bfin_read_EMAC_TXC_EQ64() bfin_read32(EMAC_TXC_EQ64) -#define bfin_write_EMAC_TXC_EQ64(val) bfin_write32(EMAC_TXC_EQ64, val) -#define bfin_read_EMAC_TXC_LT128() bfin_read32(EMAC_TXC_LT128) -#define bfin_write_EMAC_TXC_LT128(val) bfin_write32(EMAC_TXC_LT128, val) -#define bfin_read_EMAC_TXC_LT256() bfin_read32(EMAC_TXC_LT256) -#define bfin_write_EMAC_TXC_LT256(val) bfin_write32(EMAC_TXC_LT256, val) -#define bfin_read_EMAC_TXC_LT512() bfin_read32(EMAC_TXC_LT512) -#define bfin_write_EMAC_TXC_LT512(val) bfin_write32(EMAC_TXC_LT512, val) -#define bfin_read_EMAC_TXC_LT1024() bfin_read32(EMAC_TXC_LT1024) -#define bfin_write_EMAC_TXC_LT1024(val) bfin_write32(EMAC_TXC_LT1024, val) -#define bfin_read_EMAC_TXC_GE1024() bfin_read32(EMAC_TXC_GE1024) -#define bfin_write_EMAC_TXC_GE1024(val) bfin_write32(EMAC_TXC_GE1024, val) -#define bfin_read_EMAC_TXC_ABORT() bfin_read32(EMAC_TXC_ABORT) -#define bfin_write_EMAC_TXC_ABORT(val) bfin_write32(EMAC_TXC_ABORT, val) +/* PTP TSYNC Registers */ #define bfin_read_EMAC_PTP_CTL() bfin_read16(EMAC_PTP_CTL) #define bfin_write_EMAC_PTP_CTL(val) bfin_write16(EMAC_PTP_CTL, val) @@ -227,72 +56,4 @@ #define bfin_read_EMAC_PTP_PPS_PERIOD() bfin_read32(EMAC_PTP_PPS_PERIOD) #define bfin_write_EMAC_PTP_PPS_PERIOD(val) bfin_write32(EMAC_PTP_PPS_PERIOD, val) -/* Removable Storage Interface Registers */ - -#define bfin_read_RSI_PWR_CTL() bfin_read16(RSI_PWR_CONTROL) -#define bfin_write_RSI_PWR_CTL(val) bfin_write16(RSI_PWR_CONTROL, val) -#define bfin_read_RSI_CLK_CTL() bfin_read16(RSI_CLK_CONTROL) -#define bfin_write_RSI_CLK_CTL(val) bfin_write16(RSI_CLK_CONTROL, val) -#define bfin_read_RSI_ARGUMENT() bfin_read32(RSI_ARGUMENT) -#define bfin_write_RSI_ARGUMENT(val) bfin_write32(RSI_ARGUMENT, val) -#define bfin_read_RSI_COMMAND() bfin_read16(RSI_COMMAND) -#define bfin_write_RSI_COMMAND(val) bfin_write16(RSI_COMMAND, val) -#define bfin_read_RSI_RESP_CMD() bfin_read16(RSI_RESP_CMD) -#define bfin_write_RSI_RESP_CMD(val) bfin_write16(RSI_RESP_CMD, val) -#define bfin_read_RSI_RESPONSE0() bfin_read32(RSI_RESPONSE0) -#define bfin_write_RSI_RESPONSE0(val) bfin_write32(RSI_RESPONSE0, val) -#define bfin_read_RSI_RESPONSE1() bfin_read32(RSI_RESPONSE1) -#define bfin_write_RSI_RESPONSE1(val) bfin_write32(RSI_RESPONSE1, val) -#define bfin_read_RSI_RESPONSE2() bfin_read32(RSI_RESPONSE2) -#define bfin_write_RSI_RESPONSE2(val) bfin_write32(RSI_RESPONSE2, val) -#define bfin_read_RSI_RESPONSE3() bfin_read32(RSI_RESPONSE3) -#define bfin_write_RSI_RESPONSE3(val) bfin_write32(RSI_RESPONSE3, val) -#define bfin_read_RSI_DATA_TIMER() bfin_read32(RSI_DATA_TIMER) -#define bfin_write_RSI_DATA_TIMER(val) bfin_write32(RSI_DATA_TIMER, val) -#define bfin_read_RSI_DATA_LGTH() bfin_read16(RSI_DATA_LGTH) -#define bfin_write_RSI_DATA_LGTH(val) bfin_write16(RSI_DATA_LGTH, val) -#define bfin_read_RSI_DATA_CTL() bfin_read16(RSI_DATA_CONTROL) -#define bfin_write_RSI_DATA_CTL(val) bfin_write16(RSI_DATA_CONTROL, val) -#define bfin_read_RSI_DATA_CNT() bfin_read16(RSI_DATA_CNT) -#define bfin_write_RSI_DATA_CNT(val) bfin_write16(RSI_DATA_CNT, val) -#define bfin_read_RSI_STATUS() bfin_read32(RSI_STATUS) -#define bfin_write_RSI_STATUS(val) bfin_write32(RSI_STATUS, val) -#define bfin_read_RSI_STATUS_CLR() bfin_read16(RSI_STATUSCL) -#define bfin_write_RSI_STATUS_CLR(val) bfin_write16(RSI_STATUSCL, val) -#define bfin_read_RSI_MASK0() bfin_read32(RSI_MASK0) -#define bfin_write_RSI_MASK0(val) bfin_write32(RSI_MASK0, val) -#define bfin_read_RSI_MASK1() bfin_read32(RSI_MASK1) -#define bfin_write_RSI_MASK1(val) bfin_write32(RSI_MASK1, val) -#define bfin_read_RSI_FIFO_CNT() bfin_read16(RSI_FIFO_CNT) -#define bfin_write_RSI_FIFO_CNT(val) bfin_write16(RSI_FIFO_CNT, val) -#define bfin_read_RSI_CEATA_CTL() bfin_read16(RSI_CEATA_CONTROL) -#define bfin_write_RSI_CEATA_CTL(val) bfin_write16(RSI_CEATA_CONTROL, val) -#define bfin_read_RSI_FIFO() bfin_read32(RSI_FIFO) -#define bfin_write_RSI_FIFO(val) bfin_write32(RSI_FIFO, val) -#define bfin_read_RSI_E_STATUS() bfin_read16(RSI_ESTAT) -#define bfin_write_RSI_E_STATUS(val) bfin_write16(RSI_ESTAT, val) -#define bfin_read_RSI_E_MASK() bfin_read16(RSI_EMASK) -#define bfin_write_RSI_E_MASK(val) bfin_write16(RSI_EMASK, val) -#define bfin_read_RSI_CFG() bfin_read16(RSI_CONFIG) -#define bfin_write_RSI_CFG(val) bfin_write16(RSI_CONFIG, val) -#define bfin_read_RSI_RD_WAIT_EN() bfin_read16(RSI_RD_WAIT_EN) -#define bfin_write_RSI_RD_WAIT_EN(val) bfin_write16(RSI_RD_WAIT_EN, val) -#define bfin_read_RSI_PID0() bfin_read16(RSI_PID0) -#define bfin_write_RSI_PID0(val) bfin_write16(RSI_PID0, val) -#define bfin_read_RSI_PID1() bfin_read16(RSI_PID1) -#define bfin_write_RSI_PID1(val) bfin_write16(RSI_PID1, val) -#define bfin_read_RSI_PID2() bfin_read16(RSI_PID2) -#define bfin_write_RSI_PID2(val) bfin_write16(RSI_PID2, val) -#define bfin_read_RSI_PID3() bfin_read16(RSI_PID3) -#define bfin_write_RSI_PID3(val) bfin_write16(RSI_PID3, val) -#define bfin_read_RSI_PID4() bfin_read16(RSI_PID4) -#define bfin_write_RSI_PID4(val) bfin_write16(RSI_PID4, val) -#define bfin_read_RSI_PID5() bfin_read16(RSI_PID5) -#define bfin_write_RSI_PID5(val) bfin_write16(RSI_PID5, val) -#define bfin_read_RSI_PID6() bfin_read16(RSI_PID6) -#define bfin_write_RSI_PID6(val) bfin_write16(RSI_PID6, val) -#define bfin_read_RSI_PID7() bfin_read16(RSI_PID7) -#define bfin_write_RSI_PID7(val) bfin_write16(RSI_PID7, val) - - #endif /* _CDEF_BF518_H */ diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF51x_base.h b/arch/blackfin/mach-bf518/include/mach/cdefBF51x_base.h index 1d970df..e548e9d 100644 --- a/arch/blackfin/mach-bf518/include/mach/cdefBF51x_base.h +++ b/arch/blackfin/mach-bf518/include/mach/cdefBF51x_base.h @@ -131,23 +131,6 @@ #define bfin_write_UART0_GCTL(val) bfin_write16(UART0_GCTL, val) -/* SPI Controller (0xFFC00500 - 0xFFC005FF) */ -#define bfin_read_SPI_CTL() bfin_read16(SPI_CTL) -#define bfin_write_SPI_CTL(val) bfin_write16(SPI_CTL, val) -#define bfin_read_SPI_FLG() bfin_read16(SPI_FLG) -#define bfin_write_SPI_FLG(val) bfin_write16(SPI_FLG, val) -#define bfin_read_SPI_STAT() bfin_read16(SPI_STAT) -#define bfin_write_SPI_STAT(val) bfin_write16(SPI_STAT, val) -#define bfin_read_SPI_TDBR() bfin_read16(SPI_TDBR) -#define bfin_write_SPI_TDBR(val) bfin_write16(SPI_TDBR, val) -#define bfin_read_SPI_RDBR() bfin_read16(SPI_RDBR) -#define bfin_write_SPI_RDBR(val) bfin_write16(SPI_RDBR, val) -#define bfin_read_SPI_BAUD() bfin_read16(SPI_BAUD) -#define bfin_write_SPI_BAUD(val) bfin_write16(SPI_BAUD, val) -#define bfin_read_SPI_SHADOW() bfin_read16(SPI_SHADOW) -#define bfin_write_SPI_SHADOW(val) bfin_write16(SPI_SHADOW, val) - - /* TIMER0-7 Registers (0xFFC00600 - 0xFFC006FF) */ #define bfin_read_TIMER0_CONFIG() bfin_read16(TIMER0_CONFIG) #define bfin_write_TIMER0_CONFIG(val) bfin_write16(TIMER0_CONFIG, val) @@ -844,6 +827,7 @@ #define bfin_write_PPI_CONTROL(val) bfin_write16(PPI_CONTROL, val) #define bfin_read_PPI_STATUS() bfin_read16(PPI_STATUS) #define bfin_write_PPI_STATUS(val) bfin_write16(PPI_STATUS, val) +#define bfin_clear_PPI_STATUS() bfin_write_PPI_STATUS(0xFFFF) #define bfin_read_PPI_DELAY() bfin_read16(PPI_DELAY) #define bfin_write_PPI_DELAY(val) bfin_write16(PPI_DELAY, val) #define bfin_read_PPI_COUNT() bfin_read16(PPI_COUNT) @@ -1062,17 +1046,6 @@ #define bfin_read_CNT_MIN() bfin_read32(CNT_MIN) #define bfin_write_CNT_MIN(val) bfin_write32(CNT_MIN, val) -/* OTP/FUSE Registers */ - -#define bfin_read_OTP_CONTROL() bfin_read16(OTP_CONTROL) -#define bfin_write_OTP_CONTROL(val) bfin_write16(OTP_CONTROL, val) -#define bfin_read_OTP_BEN() bfin_read16(OTP_BEN) -#define bfin_write_OTP_BEN(val) bfin_write16(OTP_BEN, val) -#define bfin_read_OTP_STATUS() bfin_read16(OTP_STATUS) -#define bfin_write_OTP_STATUS(val) bfin_write16(OTP_STATUS, val) -#define bfin_read_OTP_TIMING() bfin_read32(OTP_TIMING) -#define bfin_write_OTP_TIMING(val) bfin_write32(OTP_TIMING, val) - /* Security Registers */ #define bfin_read_SECURE_SYSSWT() bfin_read32(SECURE_SYSSWT) @@ -1082,52 +1055,6 @@ #define bfin_read_SECURE_STATUS() bfin_read16(SECURE_STATUS) #define bfin_write_SECURE_STATUS(val) bfin_write16(SECURE_STATUS, val) -/* OTP Read/Write Data Buffer Registers */ - -#define bfin_read_OTP_DATA0() bfin_read32(OTP_DATA0) -#define bfin_write_OTP_DATA0(val) bfin_write32(OTP_DATA0, val) -#define bfin_read_OTP_DATA1() bfin_read32(OTP_DATA1) -#define bfin_write_OTP_DATA1(val) bfin_write32(OTP_DATA1, val) -#define bfin_read_OTP_DATA2() bfin_read32(OTP_DATA2) -#define bfin_write_OTP_DATA2(val) bfin_write32(OTP_DATA2, val) -#define bfin_read_OTP_DATA3() bfin_read32(OTP_DATA3) -#define bfin_write_OTP_DATA3(val) bfin_write32(OTP_DATA3, val) - -/* NFC Registers */ - -#define bfin_read_NFC_CTL() bfin_read16(NFC_CTL) -#define bfin_write_NFC_CTL(val) bfin_write16(NFC_CTL, val) -#define bfin_read_NFC_STAT() bfin_read16(NFC_STAT) -#define bfin_write_NFC_STAT(val) bfin_write16(NFC_STAT, val) -#define bfin_read_NFC_IRQSTAT() bfin_read16(NFC_IRQSTAT) -#define bfin_write_NFC_IRQSTAT(val) bfin_write16(NFC_IRQSTAT, val) -#define bfin_read_NFC_IRQMASK() bfin_read16(NFC_IRQMASK) -#define bfin_write_NFC_IRQMASK(val) bfin_write16(NFC_IRQMASK, val) -#define bfin_read_NFC_ECC0() bfin_read16(NFC_ECC0) -#define bfin_write_NFC_ECC0(val) bfin_write16(NFC_ECC0, val) -#define bfin_read_NFC_ECC1() bfin_read16(NFC_ECC1) -#define bfin_write_NFC_ECC1(val) bfin_write16(NFC_ECC1, val) -#define bfin_read_NFC_ECC2() bfin_read16(NFC_ECC2) -#define bfin_write_NFC_ECC2(val) bfin_write16(NFC_ECC2, val) -#define bfin_read_NFC_ECC3() bfin_read16(NFC_ECC3) -#define bfin_write_NFC_ECC3(val) bfin_write16(NFC_ECC3, val) -#define bfin_read_NFC_COUNT() bfin_read16(NFC_COUNT) -#define bfin_write_NFC_COUNT(val) bfin_write16(NFC_COUNT, val) -#define bfin_read_NFC_RST() bfin_read16(NFC_RST) -#define bfin_write_NFC_RST(val) bfin_write16(NFC_RST, val) -#define bfin_read_NFC_PGCTL() bfin_read16(NFC_PGCTL) -#define bfin_write_NFC_PGCTL(val) bfin_write16(NFC_PGCTL, val) -#define bfin_read_NFC_READ() bfin_read16(NFC_READ) -#define bfin_write_NFC_READ(val) bfin_write16(NFC_READ, val) -#define bfin_read_NFC_ADDR() bfin_read16(NFC_ADDR) -#define bfin_write_NFC_ADDR(val) bfin_write16(NFC_ADDR, val) -#define bfin_read_NFC_CMD() bfin_read16(NFC_CMD) -#define bfin_write_NFC_CMD(val) bfin_write16(NFC_CMD, val) -#define bfin_read_NFC_DATA_WR() bfin_read16(NFC_DATA_WR) -#define bfin_write_NFC_DATA_WR(val) bfin_write16(NFC_DATA_WR, val) -#define bfin_read_NFC_DATA_RD() bfin_read16(NFC_DATA_RD) -#define bfin_write_NFC_DATA_RD(val) bfin_write16(NFC_DATA_RD, val) - /* These need to be last due to the cdef/linux inter-dependencies */ #include <asm/irq.h> diff --git a/arch/blackfin/mach-bf518/include/mach/defBF514.h b/arch/blackfin/mach-bf518/include/mach/defBF514.h index b5adca2..92e950d 100644 --- a/arch/blackfin/mach-bf518/include/mach/defBF514.h +++ b/arch/blackfin/mach-bf518/include/mach/defBF514.h @@ -7,49 +7,8 @@ #ifndef _DEF_BF514_H #define _DEF_BF514_H -/* Include all Core registers and bit definitions */ -#include <asm/def_LPBlackfin.h> - -/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF514 */ - -/* Include defBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */ -#include "defBF51x_base.h" - -/* The following are the #defines needed by ADSP-BF514 that are not in the common header */ - -/* SDH Registers */ - -#define SDH_PWR_CTL 0xFFC03900 /* SDH Power Control */ -#define SDH_CLK_CTL 0xFFC03904 /* SDH Clock Control */ -#define SDH_ARGUMENT 0xFFC03908 /* SDH Argument */ -#define SDH_COMMAND 0xFFC0390C /* SDH Command */ -#define SDH_RESP_CMD 0xFFC03910 /* SDH Response Command */ -#define SDH_RESPONSE0 0xFFC03914 /* SDH Response0 */ -#define SDH_RESPONSE1 0xFFC03918 /* SDH Response1 */ -#define SDH_RESPONSE2 0xFFC0391C /* SDH Response2 */ -#define SDH_RESPONSE3 0xFFC03920 /* SDH Response3 */ -#define SDH_DATA_TIMER 0xFFC03924 /* SDH Data Timer */ -#define SDH_DATA_LGTH 0xFFC03928 /* SDH Data Length */ -#define SDH_DATA_CTL 0xFFC0392C /* SDH Data Control */ -#define SDH_DATA_CNT 0xFFC03930 /* SDH Data Counter */ -#define SDH_STATUS 0xFFC03934 /* SDH Status */ -#define SDH_STATUS_CLR 0xFFC03938 /* SDH Status Clear */ -#define SDH_MASK0 0xFFC0393C /* SDH Interrupt0 Mask */ -#define SDH_MASK1 0xFFC03940 /* SDH Interrupt1 Mask */ -#define SDH_FIFO_CNT 0xFFC03948 /* SDH FIFO Counter */ -#define SDH_FIFO 0xFFC03980 /* SDH Data FIFO */ -#define SDH_E_STATUS 0xFFC039C0 /* SDH Exception Status */ -#define SDH_E_MASK 0xFFC039C4 /* SDH Exception Mask */ -#define SDH_CFG 0xFFC039C8 /* SDH Configuration */ -#define SDH_RD_WAIT_EN 0xFFC039CC /* SDH Read Wait Enable */ -#define SDH_PID0 0xFFC039D0 /* SDH Peripheral Identification0 */ -#define SDH_PID1 0xFFC039D4 /* SDH Peripheral Identification1 */ -#define SDH_PID2 0xFFC039D8 /* SDH Peripheral Identification2 */ -#define SDH_PID3 0xFFC039DC /* SDH Peripheral Identification3 */ -#define SDH_PID4 0xFFC039E0 /* SDH Peripheral Identification4 */ -#define SDH_PID5 0xFFC039E4 /* SDH Peripheral Identification5 */ -#define SDH_PID6 0xFFC039E8 /* SDH Peripheral Identification6 */ -#define SDH_PID7 0xFFC039EC /* SDH Peripheral Identification7 */ +/* BF514 is BF512 + RSI */ +#include "defBF512.h" /* Removable Storage Interface Registers */ diff --git a/arch/blackfin/mach-bf518/include/mach/defBF516.h b/arch/blackfin/mach-bf518/include/mach/defBF516.h index 7eb1877..22a3aa0 100644 --- a/arch/blackfin/mach-bf518/include/mach/defBF516.h +++ b/arch/blackfin/mach-bf518/include/mach/defBF516.h @@ -7,13 +7,8 @@ #ifndef _DEF_BF516_H #define _DEF_BF516_H -/* Include all Core registers and bit definitions */ -#include <asm/def_LPBlackfin.h> - -/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF516 */ - -/* Include defBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */ -#include "defBF51x_base.h" +/* BF516 is BF514 + EMAC */ +#include "defBF514.h" /* The following are the #defines needed by ADSP-BF516 that are not in the common header */ /* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */ @@ -394,208 +389,4 @@ #define TX_GE1024_CNT 0x00200000 /* 1024-Max-Byte TX Frames Sent */ #define TX_ABORT_CNT 0x00400000 /* TX Frames Aborted */ -/* SDH Registers */ - -#define SDH_PWR_CTL 0xFFC03900 /* SDH Power Control */ -#define SDH_CLK_CTL 0xFFC03904 /* SDH Clock Control */ -#define SDH_ARGUMENT 0xFFC03908 /* SDH Argument */ -#define SDH_COMMAND 0xFFC0390C /* SDH Command */ -#define SDH_RESP_CMD 0xFFC03910 /* SDH Response Command */ -#define SDH_RESPONSE0 0xFFC03914 /* SDH Response0 */ -#define SDH_RESPONSE1 0xFFC03918 /* SDH Response1 */ -#define SDH_RESPONSE2 0xFFC0391C /* SDH Response2 */ -#define SDH_RESPONSE3 0xFFC03920 /* SDH Response3 */ -#define SDH_DATA_TIMER 0xFFC03924 /* SDH Data Timer */ -#define SDH_DATA_LGTH 0xFFC03928 /* SDH Data Length */ -#define SDH_DATA_CTL 0xFFC0392C /* SDH Data Control */ -#define SDH_DATA_CNT 0xFFC03930 /* SDH Data Counter */ -#define SDH_STATUS 0xFFC03934 /* SDH Status */ -#define SDH_STATUS_CLR 0xFFC03938 /* SDH Status Clear */ -#define SDH_MASK0 0xFFC0393C /* SDH Interrupt0 Mask */ -#define SDH_MASK1 0xFFC03940 /* SDH Interrupt1 Mask */ -#define SDH_FIFO_CNT 0xFFC03948 /* SDH FIFO Counter */ -#define SDH_FIFO 0xFFC03980 /* SDH Data FIFO */ -#define SDH_E_STATUS 0xFFC039C0 /* SDH Exception Status */ -#define SDH_E_MASK 0xFFC039C4 /* SDH Exception Mask */ -#define SDH_CFG 0xFFC039C8 /* SDH Configuration */ -#define SDH_RD_WAIT_EN 0xFFC039CC /* SDH Read Wait Enable */ -#define SDH_PID0 0xFFC039D0 /* SDH Peripheral Identification0 */ -#define SDH_PID1 0xFFC039D4 /* SDH Peripheral Identification1 */ -#define SDH_PID2 0xFFC039D8 /* SDH Peripheral Identification2 */ -#define SDH_PID3 0xFFC039DC /* SDH Peripheral Identification3 */ -#define SDH_PID4 0xFFC039E0 /* SDH Peripheral Identification4 */ -#define SDH_PID5 0xFFC039E4 /* SDH Peripheral Identification5 */ -#define SDH_PID6 0xFFC039E8 /* SDH Peripheral Identification6 */ -#define SDH_PID7 0xFFC039EC /* SDH Peripheral Identification7 */ - -/* Removable Storage Interface Registers */ - -#define RSI_PWR_CONTROL 0xFFC03800 /* RSI Power Control Register */ -#define RSI_CLK_CONTROL 0xFFC03804 /* RSI Clock Control Register */ -#define RSI_ARGUMENT 0xFFC03808 /* RSI Argument Register */ -#define RSI_COMMAND 0xFFC0380C /* RSI Command Register */ -#define RSI_RESP_CMD 0xFFC03810 /* RSI Response Command Register */ -#define RSI_RESPONSE0 0xFFC03814 /* RSI Response Register */ -#define RSI_RESPONSE1 0xFFC03818 /* RSI Response Register */ -#define RSI_RESPONSE2 0xFFC0381C /* RSI Response Register */ -#define RSI_RESPONSE3 0xFFC03820 /* RSI Response Register */ -#define RSI_DATA_TIMER 0xFFC03824 /* RSI Data Timer Register */ -#define RSI_DATA_LGTH 0xFFC03828 /* RSI Data Length Register */ -#define RSI_DATA_CONTROL 0xFFC0382C /* RSI Data Control Register */ -#define RSI_DATA_CNT 0xFFC03830 /* RSI Data Counter Register */ -#define RSI_STATUS 0xFFC03834 /* RSI Status Register */ -#define RSI_STATUSCL 0xFFC03838 /* RSI Status Clear Register */ -#define RSI_MASK0 0xFFC0383C /* RSI Interrupt 0 Mask Register */ -#define RSI_MASK1 0xFFC03840 /* RSI Interrupt 1 Mask Register */ -#define RSI_FIFO_CNT 0xFFC03848 /* RSI FIFO Counter Register */ -#define RSI_CEATA_CONTROL 0xFFC0384C /* RSI CEATA Register */ -#define RSI_FIFO 0xFFC03880 /* RSI Data FIFO Register */ -#define RSI_ESTAT 0xFFC038C0 /* RSI Exception Status Register */ -#define RSI_EMASK 0xFFC038C4 /* RSI Exception Mask Register */ -#define RSI_CONFIG 0xFFC038C8 /* RSI Configuration Register */ -#define RSI_RD_WAIT_EN 0xFFC038CC /* RSI Read Wait Enable Register */ -#define RSI_PID0 0xFFC03FE0 /* RSI Peripheral ID Register 0 */ -#define RSI_PID1 0xFFC03FE4 /* RSI Peripheral ID Register 1 */ -#define RSI_PID2 0xFFC03FE8 /* RSI Peripheral ID Register 2 */ -#define RSI_PID3 0xFFC03FEC /* RSI Peripheral ID Register 3 */ -#define RSI_PID4 0xFFC03FF0 /* RSI Peripheral ID Register 4 */ -#define RSI_PID5 0xFFC03FF4 /* RSI Peripheral ID Register 5 */ -#define RSI_PID6 0xFFC03FF8 /* RSI Peripheral ID Register 6 */ -#define RSI_PID7 0xFFC03FFC /* RSI Peripheral ID Register 7 */ - -/* ********************************************************** */ -/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */ -/* and MULTI BIT READ MACROS */ -/* ********************************************************** */ - -/* Bit masks for SDH_COMMAND */ - -#define CMD_IDX 0x3f /* Command Index */ -#define CMD_RSP 0x40 /* Response */ -#define CMD_L_RSP 0x80 /* Long Response */ -#define CMD_INT_E 0x100 /* Command Interrupt */ -#define CMD_PEND_E 0x200 /* Command Pending */ -#define CMD_E 0x400 /* Command Enable */ - -/* Bit masks for SDH_PWR_CTL */ - -#define PWR_ON 0x3 /* Power On */ -#if 0 -#define TBD 0x3c /* TBD */ -#endif -#define SD_CMD_OD 0x40 /* Open Drain Output */ -#define ROD_CTL 0x80 /* Rod Control */ - -/* Bit masks for SDH_CLK_CTL */ - -#define CLKDIV 0xff /* MC_CLK Divisor */ -#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */ -#define PWR_SV_E 0x200 /* Power Save Enable */ -#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */ -#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */ - -/* Bit masks for SDH_RESP_CMD */ - -#define RESP_CMD 0x3f /* Response Command */ - -/* Bit masks for SDH_DATA_CTL */ - -#define DTX_E 0x1 /* Data Transfer Enable */ -#define DTX_DIR 0x2 /* Data Transfer Direction */ -#define DTX_MODE 0x4 /* Data Transfer Mode */ -#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */ -#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */ - -/* Bit masks for SDH_STATUS */ - -#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */ -#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */ -#define CMD_TIME_OUT 0x4 /* CMD Time Out */ -#define DAT_TIME_OUT 0x8 /* Data Time Out */ -#define TX_UNDERRUN 0x10 /* Transmit Underrun */ -#define RX_OVERRUN 0x20 /* Receive Overrun */ -#define CMD_RESP_END 0x40 /* CMD Response End */ -#define CMD_SENT 0x80 /* CMD Sent */ -#define DAT_END 0x100 /* Data End */ -#define START_BIT_ERR 0x200 /* Start Bit Error */ -#define DAT_BLK_END 0x400 /* Data Block End */ -#define CMD_ACT 0x800 /* CMD Active */ -#define TX_ACT 0x1000 /* Transmit Active */ -#define RX_ACT 0x2000 /* Receive Active */ -#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */ -#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */ -#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */ -#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */ -#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */ -#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */ -#define TX_DAT_RDY 0x100000 /* Transmit Data Available */ -#define RX_FIFO_RDY 0x200000 /* Receive Data Available */ - -/* Bit masks for SDH_STATUS_CLR */ - -#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */ -#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */ -#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */ -#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */ -#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */ -#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */ -#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */ -#define CMD_SENT_STAT 0x80 /* CMD Sent Status */ -#define DAT_END_STAT 0x100 /* Data End Status */ -#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */ -#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */ - -/* Bit masks for SDH_MASK0 */ - -#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */ -#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */ -#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */ -#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */ -#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */ -#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */ -#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */ -#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */ -#define DAT_END_MASK 0x100 /* Data End Mask */ -#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */ -#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */ -#define CMD_ACT_MASK 0x800 /* CMD Active Mask */ -#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */ -#define RX_ACT_MASK 0x2000 /* Receive Active Mask */ -#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */ -#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */ -#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */ -#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */ -#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */ -#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */ -#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */ -#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */ - -/* Bit masks for SDH_FIFO_CNT */ - -#define FIFO_COUNT 0x7fff /* FIFO Count */ - -/* Bit masks for SDH_E_STATUS */ - -#define SDIO_INT_DET 0x2 /* SDIO Int Detected */ -#define SD_CARD_DET 0x10 /* SD Card Detect */ - -/* Bit masks for SDH_E_MASK */ - -#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */ -#define SCD_MSK 0x40 /* Mask Card Detect */ - -/* Bit masks for SDH_CFG */ - -#define CLKS_EN 0x1 /* Clocks Enable */ -#define SD4E 0x4 /* SDIO 4-Bit Enable */ -#define MWE 0x8 /* Moving Window Enable */ -#define SD_RST 0x10 /* SDMMC Reset */ -#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */ -#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */ -#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */ - -/* Bit masks for SDH_RD_WAIT_EN */ - -#define RWR 0x1 /* Read Wait Request */ - #endif /* _DEF_BF516_H */ diff --git a/arch/blackfin/mach-bf518/include/mach/defBF518.h b/arch/blackfin/mach-bf518/include/mach/defBF518.h index 794cf06..cb18270 100644 --- a/arch/blackfin/mach-bf518/include/mach/defBF518.h +++ b/arch/blackfin/mach-bf518/include/mach/defBF518.h @@ -7,461 +7,8 @@ #ifndef _DEF_BF518_H #define _DEF_BF518_H -/* Include all Core registers and bit definitions */ -#include <asm/def_LPBlackfin.h> - -/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF518 */ - -/* Include defBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */ -#include "defBF51x_base.h" - -/* The following are the #defines needed by ADSP-BF518 that are not in the common header */ -/* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */ - -#define EMAC_OPMODE 0xFFC03000 /* Operating Mode Register */ -#define EMAC_ADDRLO 0xFFC03004 /* Address Low (32 LSBs) Register */ -#define EMAC_ADDRHI 0xFFC03008 /* Address High (16 MSBs) Register */ -#define EMAC_HASHLO 0xFFC0300C /* Multicast Hash Table Low (Bins 31-0) Register */ -#define EMAC_HASHHI 0xFFC03010 /* Multicast Hash Table High (Bins 63-32) Register */ -#define EMAC_STAADD 0xFFC03014 /* Station Management Address Register */ -#define EMAC_STADAT 0xFFC03018 /* Station Management Data Register */ -#define EMAC_FLC 0xFFC0301C /* Flow Control Register */ -#define EMAC_VLAN1 0xFFC03020 /* VLAN1 Tag Register */ -#define EMAC_VLAN2 0xFFC03024 /* VLAN2 Tag Register */ -#define EMAC_WKUP_CTL 0xFFC0302C /* Wake-Up Control/Status Register */ -#define EMAC_WKUP_FFMSK0 0xFFC03030 /* Wake-Up Frame Filter 0 Byte Mask Register */ -#define EMAC_WKUP_FFMSK1 0xFFC03034 /* Wake-Up Frame Filter 1 Byte Mask Register */ -#define EMAC_WKUP_FFMSK2 0xFFC03038 /* Wake-Up Frame Filter 2 Byte Mask Register */ -#define EMAC_WKUP_FFMSK3 0xFFC0303C /* Wake-Up Frame Filter 3 Byte Mask Register */ -#define EMAC_WKUP_FFCMD 0xFFC03040 /* Wake-Up Frame Filter Commands Register */ -#define EMAC_WKUP_FFOFF 0xFFC03044 /* Wake-Up Frame Filter Offsets Register */ -#define EMAC_WKUP_FFCRC0 0xFFC03048 /* Wake-Up Frame Filter 0,1 CRC-16 Register */ -#define EMAC_WKUP_FFCRC1 0xFFC0304C /* Wake-Up Frame Filter 2,3 CRC-16 Register */ - -#define EMAC_SYSCTL 0xFFC03060 /* EMAC System Control Register */ -#define EMAC_SYSTAT 0xFFC03064 /* EMAC System Status Register */ -#define EMAC_RX_STAT 0xFFC03068 /* RX Current Frame Status Register */ -#define EMAC_RX_STKY 0xFFC0306C /* RX Sticky Frame Status Register */ -#define EMAC_RX_IRQE 0xFFC03070 /* RX Frame Status Interrupt Enables Register */ -#define EMAC_TX_STAT 0xFFC03074 /* TX Current Frame Status Register */ -#define EMAC_TX_STKY 0xFFC03078 /* TX Sticky Frame Status Register */ -#define EMAC_TX_IRQE 0xFFC0307C /* TX Frame Status Interrupt Enables Register */ - -#define EMAC_MMC_CTL 0xFFC03080 /* MMC Counter Control Register */ -#define EMAC_MMC_RIRQS 0xFFC03084 /* MMC RX Interrupt Status Register */ -#define EMAC_MMC_RIRQE 0xFFC03088 /* MMC RX Interrupt Enables Register */ -#define EMAC_MMC_TIRQS 0xFFC0308C /* MMC TX Interrupt Status Register */ -#define EMAC_MMC_TIRQE 0xFFC03090 /* MMC TX Interrupt Enables Register */ - -#define EMAC_RXC_OK 0xFFC03100 /* RX Frame Successful Count */ -#define EMAC_RXC_FCS 0xFFC03104 /* RX Frame FCS Failure Count */ -#define EMAC_RXC_ALIGN 0xFFC03108 /* RX Alignment Error Count */ -#define EMAC_RXC_OCTET 0xFFC0310C /* RX Octets Successfully Received Count */ -#define EMAC_RXC_DMAOVF 0xFFC03110 /* Internal MAC Sublayer Error RX Frame Count */ -#define EMAC_RXC_UNICST 0xFFC03114 /* Unicast RX Frame Count */ -#define EMAC_RXC_MULTI 0xFFC03118 /* Multicast RX Frame Count */ -#define EMAC_RXC_BROAD 0xFFC0311C /* Broadcast RX Frame Count */ -#define EMAC_RXC_LNERRI 0xFFC03120 /* RX Frame In Range Error Count */ -#define EMAC_RXC_LNERRO 0xFFC03124 /* RX Frame Out Of Range Error Count */ -#define EMAC_RXC_LONG 0xFFC03128 /* RX Frame Too Long Count */ -#define EMAC_RXC_MACCTL 0xFFC0312C /* MAC Control RX Frame Count */ -#define EMAC_RXC_OPCODE 0xFFC03130 /* Unsupported Op-Code RX Frame Count */ -#define EMAC_RXC_PAUSE 0xFFC03134 /* MAC Control Pause RX Frame Count */ -#define EMAC_RXC_ALLFRM 0xFFC03138 /* Overall RX Frame Count */ -#define EMAC_RXC_ALLOCT 0xFFC0313C /* Overall RX Octet Count */ -#define EMAC_RXC_TYPED 0xFFC03140 /* Type/Length Consistent RX Frame Count */ -#define EMAC_RXC_SHORT 0xFFC03144 /* RX Frame Fragment Count - Byte Count x < 64 */ -#define EMAC_RXC_EQ64 0xFFC03148 /* Good RX Frame Count - Byte Count x = 64 */ -#define EMAC_RXC_LT128 0xFFC0314C /* Good RX Frame Count - Byte Count 64 < x < 128 */ -#define EMAC_RXC_LT256 0xFFC03150 /* Good RX Frame Count - Byte Count 128 <= x < 256 */ -#define EMAC_RXC_LT512 0xFFC03154 /* Good RX Frame Count - Byte Count 256 <= x < 512 */ -#define EMAC_RXC_LT1024 0xFFC03158 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */ -#define EMAC_RXC_GE1024 0xFFC0315C /* Good RX Frame Count - Byte Count x >= 1024 */ - -#define EMAC_TXC_OK 0xFFC03180 /* TX Frame Successful Count */ -#define EMAC_TXC_1COL 0xFFC03184 /* TX Frames Successful After Single Collision Count */ -#define EMAC_TXC_GT1COL 0xFFC03188 /* TX Frames Successful After Multiple Collisions Count */ -#define EMAC_TXC_OCTET 0xFFC0318C /* TX Octets Successfully Received Count */ -#define EMAC_TXC_DEFER 0xFFC03190 /* TX Frame Delayed Due To Busy Count */ -#define EMAC_TXC_LATECL 0xFFC03194 /* Late TX Collisions Count */ -#define EMAC_TXC_XS_COL 0xFFC03198 /* TX Frame Failed Due To Excessive Collisions Count */ -#define EMAC_TXC_DMAUND 0xFFC0319C /* Internal MAC Sublayer Error TX Frame Count */ -#define EMAC_TXC_CRSERR 0xFFC031A0 /* Carrier Sense Deasserted During TX Frame Count */ -#define EMAC_TXC_UNICST 0xFFC031A4 /* Unicast TX Frame Count */ -#define EMAC_TXC_MULTI 0xFFC031A8 /* Multicast TX Frame Count */ -#define EMAC_TXC_BROAD 0xFFC031AC /* Broadcast TX Frame Count */ -#define EMAC_TXC_XS_DFR 0xFFC031B0 /* TX Frames With Excessive Deferral Count */ -#define EMAC_TXC_MACCTL 0xFFC031B4 /* MAC Control TX Frame Count */ -#define EMAC_TXC_ALLFRM 0xFFC031B8 /* Overall TX Frame Count */ -#define EMAC_TXC_ALLOCT 0xFFC031BC /* Overall TX Octet Count */ -#define EMAC_TXC_EQ64 0xFFC031C0 /* Good TX Frame Count - Byte Count x = 64 */ -#define EMAC_TXC_LT128 0xFFC031C4 /* Good TX Frame Count - Byte Count 64 < x < 128 */ -#define EMAC_TXC_LT256 0xFFC031C8 /* Good TX Frame Count - Byte Count 128 <= x < 256 */ -#define EMAC_TXC_LT512 0xFFC031CC /* Good TX Frame Count - Byte Count 256 <= x < 512 */ -#define EMAC_TXC_LT1024 0xFFC031D0 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */ -#define EMAC_TXC_GE1024 0xFFC031D4 /* Good TX Frame Count - Byte Count x >= 1024 */ -#define EMAC_TXC_ABORT 0xFFC031D8 /* Total TX Frames Aborted Count */ - -/* Listing for IEEE-Supported Count Registers */ - -#define FramesReceivedOK EMAC_RXC_OK /* RX Frame Successful Count */ -#define FrameCheckSequenceErrors EMAC_RXC_FCS /* RX Frame FCS Failure Count */ -#define AlignmentErrors EMAC_RXC_ALIGN /* RX Alignment Error Count */ -#define OctetsReceivedOK EMAC_RXC_OCTET /* RX Octets Successfully Received Count */ -#define FramesLostDueToIntMACRcvError EMAC_RXC_DMAOVF /* Internal MAC Sublayer Error RX Frame Count */ -#define UnicastFramesReceivedOK EMAC_RXC_UNICST /* Unicast RX Frame Count */ -#define MulticastFramesReceivedOK EMAC_RXC_MULTI /* Multicast RX Frame Count */ -#define BroadcastFramesReceivedOK EMAC_RXC_BROAD /* Broadcast RX Frame Count */ -#define InRangeLengthErrors EMAC_RXC_LNERRI /* RX Frame In Range Error Count */ -#define OutOfRangeLengthField EMAC_RXC_LNERRO /* RX Frame Out Of Range Error Count */ -#define FrameTooLongErrors EMAC_RXC_LONG /* RX Frame Too Long Count */ -#define MACControlFramesReceived EMAC_RXC_MACCTL /* MAC Control RX Frame Count */ -#define UnsupportedOpcodesReceived EMAC_RXC_OPCODE /* Unsupported Op-Code RX Frame Count */ -#define PAUSEMACCtrlFramesReceived EMAC_RXC_PAUSE /* MAC Control Pause RX Frame Count */ -#define FramesReceivedAll EMAC_RXC_ALLFRM /* Overall RX Frame Count */ -#define OctetsReceivedAll EMAC_RXC_ALLOCT /* Overall RX Octet Count */ -#define TypedFramesReceived EMAC_RXC_TYPED /* Type/Length Consistent RX Frame Count */ -#define FramesLenLt64Received EMAC_RXC_SHORT /* RX Frame Fragment Count - Byte Count x < 64 */ -#define FramesLenEq64Received EMAC_RXC_EQ64 /* Good RX Frame Count - Byte Count x = 64 */ -#define FramesLen65_127Received EMAC_RXC_LT128 /* Good RX Frame Count - Byte Count 64 < x < 128 */ -#define FramesLen128_255Received EMAC_RXC_LT256 /* Good RX Frame Count - Byte Count 128 <= x < 256 */ -#define FramesLen256_511Received EMAC_RXC_LT512 /* Good RX Frame Count - Byte Count 256 <= x < 512 */ -#define FramesLen512_1023Received EMAC_RXC_LT1024 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */ -#define FramesLen1024_MaxReceived EMAC_RXC_GE1024 /* Good RX Frame Count - Byte Count x >= 1024 */ - -#define FramesTransmittedOK EMAC_TXC_OK /* TX Frame Successful Count */ -#define SingleCollisionFrames EMAC_TXC_1COL /* TX Frames Successful After Single Collision Count */ -#define MultipleCollisionFrames EMAC_TXC_GT1COL /* TX Frames Successful After Multiple Collisions Count */ -#define OctetsTransmittedOK EMAC_TXC_OCTET /* TX Octets Successfully Received Count */ -#define FramesWithDeferredXmissions EMAC_TXC_DEFER /* TX Frame Delayed Due To Busy Count */ -#define LateCollisions EMAC_TXC_LATECL /* Late TX Collisions Count */ -#define FramesAbortedDueToXSColls EMAC_TXC_XS_COL /* TX Frame Failed Due To Excessive Collisions Count */ -#define FramesLostDueToIntMacXmitError EMAC_TXC_DMAUND /* Internal MAC Sublayer Error TX Frame Count */ -#define CarrierSenseErrors EMAC_TXC_CRSERR /* Carrier Sense Deasserted During TX Frame Count */ -#define UnicastFramesXmittedOK EMAC_TXC_UNICST /* Unicast TX Frame Count */ -#define MulticastFramesXmittedOK EMAC_TXC_MULTI /* Multicast TX Frame Count */ -#define BroadcastFramesXmittedOK EMAC_TXC_BROAD /* Broadcast TX Frame Count */ -#define FramesWithExcessiveDeferral EMAC_TXC_XS_DFR /* TX Frames With Excessive Deferral Count */ -#define MACControlFramesTransmitted EMAC_TXC_MACCTL /* MAC Control TX Frame Count */ -#define FramesTransmittedAll EMAC_TXC_ALLFRM /* Overall TX Frame Count */ -#define OctetsTransmittedAll EMAC_TXC_ALLOCT /* Overall TX Octet Count */ -#define FramesLenEq64Transmitted EMAC_TXC_EQ64 /* Good TX Frame Count - Byte Count x = 64 */ -#define FramesLen65_127Transmitted EMAC_TXC_LT128 /* Good TX Frame Count - Byte Count 64 < x < 128 */ -#define FramesLen128_255Transmitted EMAC_TXC_LT256 /* Good TX Frame Count - Byte Count 128 <= x < 256 */ -#define FramesLen256_511Transmitted EMAC_TXC_LT512 /* Good TX Frame Count - Byte Count 256 <= x < 512 */ -#define FramesLen512_1023Transmitted EMAC_TXC_LT1024 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */ -#define FramesLen1024_MaxTransmitted EMAC_TXC_GE1024 /* Good TX Frame Count - Byte Count x >= 1024 */ -#define TxAbortedFrames EMAC_TXC_ABORT /* Total TX Frames Aborted Count */ - -/*********************************************************************************** -** System MMR Register Bits And Macros -** -** Disclaimer: All macros are intended to make C and Assembly code more readable. -** Use these macros carefully, as any that do left shifts for field -** depositing will result in the lower order bits being destroyed. Any -** macro that shifts left to properly position the bit-field should be -** used as part of an OR to initialize a register and NOT as a dynamic -** modifier UNLESS the lower order bits are saved and ORed back in when -** the macro is used. -*************************************************************************************/ - -/************************ ETHERNET 10/100 CONTROLLER MASKS ************************/ - -/* EMAC_OPMODE Masks */ - -#define RE 0x00000001 /* Receiver Enable */ -#define ASTP 0x00000002 /* Enable Automatic Pad Stripping On RX Frames */ -#define HU 0x00000010 /* Hash Filter Unicast Address */ -#define HM 0x00000020 /* Hash Filter Multicast Address */ -#define PAM 0x00000040 /* Pass-All-Multicast Mode Enable */ -#define PR 0x00000080 /* Promiscuous Mode Enable */ -#define IFE 0x00000100 /* Inverse Filtering Enable */ -#define DBF 0x00000200 /* Disable Broadcast Frame Reception */ -#define PBF 0x00000400 /* Pass Bad Frames Enable */ -#define PSF 0x00000800 /* Pass Short Frames Enable */ -#define RAF 0x00001000 /* Receive-All Mode */ -#define TE 0x00010000 /* Transmitter Enable */ -#define DTXPAD 0x00020000 /* Disable Automatic TX Padding */ -#define DTXCRC 0x00040000 /* Disable Automatic TX CRC Generation */ -#define DC 0x00080000 /* Deferral Check */ -#define BOLMT 0x00300000 /* Back-Off Limit */ -#define BOLMT_10 0x00000000 /* 10-bit range */ -#define BOLMT_8 0x00100000 /* 8-bit range */ -#define BOLMT_4 0x00200000 /* 4-bit range */ -#define BOLMT_1 0x00300000 /* 1-bit range */ -#define DRTY 0x00400000 /* Disable TX Retry On Collision */ -#define LCTRE 0x00800000 /* Enable TX Retry On Late Collision */ -#define RMII 0x01000000 /* RMII/MII* Mode */ -#define RMII_10 0x02000000 /* Speed Select for RMII Port (10MBit/100MBit*) */ -#define FDMODE 0x04000000 /* Duplex Mode Enable (Full/Half*) */ -#define LB 0x08000000 /* Internal Loopback Enable */ -#define DRO 0x10000000 /* Disable Receive Own Frames (Half-Duplex Mode) */ - -/* EMAC_STAADD Masks */ - -#define STABUSY 0x00000001 /* Initiate Station Mgt Reg Access / STA Busy Stat */ -#define STAOP 0x00000002 /* Station Management Operation Code (Write/Read*) */ -#define STADISPRE 0x00000004 /* Disable Preamble Generation */ -#define STAIE 0x00000008 /* Station Mgt. Transfer Done Interrupt Enable */ -#define REGAD 0x000007C0 /* STA Register Address */ -#define PHYAD 0x0000F800 /* PHY Device Address */ - -#define SET_REGAD(x) (((x)&0x1F)<< 6 ) /* Set STA Register Address */ -#define SET_PHYAD(x) (((x)&0x1F)<< 11 ) /* Set PHY Device Address */ - -/* EMAC_STADAT Mask */ - -#define STADATA 0x0000FFFF /* Station Management Data */ - -/* EMAC_FLC Masks */ - -#define FLCBUSY 0x00000001 /* Send Flow Ctrl Frame / Flow Ctrl Busy Status */ -#define FLCE 0x00000002 /* Flow Control Enable */ -#define PCF 0x00000004 /* Pass Control Frames */ -#define BKPRSEN 0x00000008 /* Enable Backpressure */ -#define FLCPAUSE 0xFFFF0000 /* Pause Time */ - -#define SET_FLCPAUSE(x) (((x)&0xFFFF)<< 16) /* Set Pause Time */ - -/* EMAC_WKUP_CTL Masks */ - -#define CAPWKFRM 0x00000001 /* Capture Wake-Up Frames */ -#define MPKE 0x00000002 /* Magic Packet Enable */ -#define RWKE 0x00000004 /* Remote Wake-Up Frame Enable */ -#define GUWKE 0x00000008 /* Global Unicast Wake Enable */ -#define MPKS 0x00000020 /* Magic Packet Received Status */ -#define RWKS 0x00000F00 /* Wake-Up Frame Received Status, Filters 3:0 */ - -/* EMAC_WKUP_FFCMD Masks */ - -#define WF0_E 0x00000001 /* Enable Wake-Up Filter 0 */ -#define WF0_T 0x00000008 /* Wake-Up Filter 0 Addr Type (Multicast/Unicast*) */ -#define WF1_E 0x00000100 /* Enable Wake-Up Filter 1 */ -#define WF1_T 0x00000800 /* Wake-Up Filter 1 Addr Type (Multicast/Unicast*) */ -#define WF2_E 0x00010000 /* Enable Wake-Up Filter 2 */ -#define WF2_T 0x00080000 /* Wake-Up Filter 2 Addr Type (Multicast/Unicast*) */ -#define WF3_E 0x01000000 /* Enable Wake-Up Filter 3 */ -#define WF3_T 0x08000000 /* Wake-Up Filter 3 Addr Type (Multicast/Unicast*) */ - -/* EMAC_WKUP_FFOFF Masks */ - -#define WF0_OFF 0x000000FF /* Wake-Up Filter 0 Pattern Offset */ -#define WF1_OFF 0x0000FF00 /* Wake-Up Filter 1 Pattern Offset */ -#define WF2_OFF 0x00FF0000 /* Wake-Up Filter 2 Pattern Offset */ -#define WF3_OFF 0xFF000000 /* Wake-Up Filter 3 Pattern Offset */ - -#define SET_WF0_OFF(x) (((x)&0xFF)<< 0 ) /* Set Wake-Up Filter 0 Byte Offset */ -#define SET_WF1_OFF(x) (((x)&0xFF)<< 8 ) /* Set Wake-Up Filter 1 Byte Offset */ -#define SET_WF2_OFF(x) (((x)&0xFF)<< 16 ) /* Set Wake-Up Filter 2 Byte Offset */ -#define SET_WF3_OFF(x) (((x)&0xFF)<< 24 ) /* Set Wake-Up Filter 3 Byte Offset */ -/* Set ALL Offsets */ -#define SET_WF_OFFS(x0,x1,x2,x3) (SET_WF0_OFF((x0))|SET_WF1_OFF((x1))|SET_WF2_OFF((x2))|SET_WF3_OFF((x3))) - -/* EMAC_WKUP_FFCRC0 Masks */ - -#define WF0_CRC 0x0000FFFF /* Wake-Up Filter 0 Pattern CRC */ -#define WF1_CRC 0xFFFF0000 /* Wake-Up Filter 1 Pattern CRC */ - -#define SET_WF0_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 0 Target CRC */ -#define SET_WF1_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 1 Target CRC */ - -/* EMAC_WKUP_FFCRC1 Masks */ - -#define WF2_CRC 0x0000FFFF /* Wake-Up Filter 2 Pattern CRC */ -#define WF3_CRC 0xFFFF0000 /* Wake-Up Filter 3 Pattern CRC */ - -#define SET_WF2_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 2 Target CRC */ -#define SET_WF3_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 3 Target CRC */ - -/* EMAC_SYSCTL Masks */ - -#define PHYIE 0x00000001 /* PHY_INT Interrupt Enable */ -#define RXDWA 0x00000002 /* Receive Frame DMA Word Alignment (Odd/Even*) */ -#define RXCKS 0x00000004 /* Enable RX Frame TCP/UDP Checksum Computation */ -#define TXDWA 0x00000010 /* Transmit Frame DMA Word Alignment (Odd/Even*) */ -#define MDCDIV 0x00003F00 /* SCLK:MDC Clock Divisor [MDC=SCLK/(2*(N+1))] */ - -#define SET_MDCDIV(x) (((x)&0x3F)<< 8) /* Set MDC Clock Divisor */ - -/* EMAC_SYSTAT Masks */ - -#define PHYINT 0x00000001 /* PHY_INT Interrupt Status */ -#define MMCINT 0x00000002 /* MMC Counter Interrupt Status */ -#define RXFSINT 0x00000004 /* RX Frame-Status Interrupt Status */ -#define TXFSINT 0x00000008 /* TX Frame-Status Interrupt Status */ -#define WAKEDET 0x00000010 /* Wake-Up Detected Status */ -#define RXDMAERR 0x00000020 /* RX DMA Direction Error Status */ -#define TXDMAERR 0x00000040 /* TX DMA Direction Error Status */ -#define STMDONE 0x00000080 /* Station Mgt. Transfer Done Interrupt Status */ - -/* EMAC_RX_STAT, EMAC_RX_STKY, and EMAC_RX_IRQE Masks */ - -#define RX_FRLEN 0x000007FF /* Frame Length In Bytes */ -#define RX_COMP 0x00001000 /* RX Frame Complete */ -#define RX_OK 0x00002000 /* RX Frame Received With No Errors */ -#define RX_LONG 0x00004000 /* RX Frame Too Long Error */ -#define RX_ALIGN 0x00008000 /* RX Frame Alignment Error */ -#define RX_CRC 0x00010000 /* RX Frame CRC Error */ -#define RX_LEN 0x00020000 /* RX Frame Length Error */ -#define RX_FRAG 0x00040000 /* RX Frame Fragment Error */ -#define RX_ADDR 0x00080000 /* RX Frame Address Filter Failed Error */ -#define RX_DMAO 0x00100000 /* RX Frame DMA Overrun Error */ -#define RX_PHY 0x00200000 /* RX Frame PHY Error */ -#define RX_LATE 0x00400000 /* RX Frame Late Collision Error */ -#define RX_RANGE 0x00800000 /* RX Frame Length Field Out of Range Error */ -#define RX_MULTI 0x01000000 /* RX Multicast Frame Indicator */ -#define RX_BROAD 0x02000000 /* RX Broadcast Frame Indicator */ -#define RX_CTL 0x04000000 /* RX Control Frame Indicator */ -#define RX_UCTL 0x08000000 /* Unsupported RX Control Frame Indicator */ -#define RX_TYPE 0x10000000 /* RX Typed Frame Indicator */ -#define RX_VLAN1 0x20000000 /* RX VLAN1 Frame Indicator */ -#define RX_VLAN2 0x40000000 /* RX VLAN2 Frame Indicator */ -#define RX_ACCEPT 0x80000000 /* RX Frame Accepted Indicator */ - -/* EMAC_TX_STAT, EMAC_TX_STKY, and EMAC_TX_IRQE Masks */ - -#define TX_COMP 0x00000001 /* TX Frame Complete */ -#define TX_OK 0x00000002 /* TX Frame Sent With No Errors */ -#define TX_ECOLL 0x00000004 /* TX Frame Excessive Collision Error */ -#define TX_LATE 0x00000008 /* TX Frame Late Collision Error */ -#define TX_DMAU 0x00000010 /* TX Frame DMA Underrun Error (STAT) */ -#define TX_MACE 0x00000010 /* Internal MAC Error Detected (STKY and IRQE) */ -#define TX_EDEFER 0x00000020 /* TX Frame Excessive Deferral Error */ -#define TX_BROAD 0x00000040 /* TX Broadcast Frame Indicator */ -#define TX_MULTI 0x00000080 /* TX Multicast Frame Indicator */ -#define TX_CCNT 0x00000F00 /* TX Frame Collision Count */ -#define TX_DEFER 0x00001000 /* TX Frame Deferred Indicator */ -#define TX_CRS 0x00002000 /* TX Frame Carrier Sense Not Asserted Error */ -#define TX_LOSS 0x00004000 /* TX Frame Carrier Lost During TX Error */ -#define TX_RETRY 0x00008000 /* TX Frame Successful After Retry */ -#define TX_FRLEN 0x07FF0000 /* TX Frame Length (Bytes) */ - -/* EMAC_MMC_CTL Masks */ -#define RSTC 0x00000001 /* Reset All Counters */ -#define CROLL 0x00000002 /* Counter Roll-Over Enable */ -#define CCOR 0x00000004 /* Counter Clear-On-Read Mode Enable */ -#define MMCE 0x00000008 /* Enable MMC Counter Operation */ - -/* EMAC_MMC_RIRQS and EMAC_MMC_RIRQE Masks */ -#define RX_OK_CNT 0x00000001 /* RX Frames Received With No Errors */ -#define RX_FCS_CNT 0x00000002 /* RX Frames W/Frame Check Sequence Errors */ -#define RX_ALIGN_CNT 0x00000004 /* RX Frames With Alignment Errors */ -#define RX_OCTET_CNT 0x00000008 /* RX Octets Received OK */ -#define RX_LOST_CNT 0x00000010 /* RX Frames Lost Due To Internal MAC RX Error */ -#define RX_UNI_CNT 0x00000020 /* Unicast RX Frames Received OK */ -#define RX_MULTI_CNT 0x00000040 /* Multicast RX Frames Received OK */ -#define RX_BROAD_CNT 0x00000080 /* Broadcast RX Frames Received OK */ -#define RX_IRL_CNT 0x00000100 /* RX Frames With In-Range Length Errors */ -#define RX_ORL_CNT 0x00000200 /* RX Frames With Out-Of-Range Length Errors */ -#define RX_LONG_CNT 0x00000400 /* RX Frames With Frame Too Long Errors */ -#define RX_MACCTL_CNT 0x00000800 /* MAC Control RX Frames Received */ -#define RX_OPCODE_CTL 0x00001000 /* Unsupported Op-Code RX Frames Received */ -#define RX_PAUSE_CNT 0x00002000 /* PAUSEMAC Control RX Frames Received */ -#define RX_ALLF_CNT 0x00004000 /* All RX Frames Received */ -#define RX_ALLO_CNT 0x00008000 /* All RX Octets Received */ -#define RX_TYPED_CNT 0x00010000 /* Typed RX Frames Received */ -#define RX_SHORT_CNT 0x00020000 /* RX Frame Fragments (< 64 Bytes) Received */ -#define RX_EQ64_CNT 0x00040000 /* 64-Byte RX Frames Received */ -#define RX_LT128_CNT 0x00080000 /* 65-127-Byte RX Frames Received */ -#define RX_LT256_CNT 0x00100000 /* 128-255-Byte RX Frames Received */ -#define RX_LT512_CNT 0x00200000 /* 256-511-Byte RX Frames Received */ -#define RX_LT1024_CNT 0x00400000 /* 512-1023-Byte RX Frames Received */ -#define RX_GE1024_CNT 0x00800000 /* 1024-Max-Byte RX Frames Received */ - -/* EMAC_MMC_TIRQS and EMAC_MMC_TIRQE Masks */ - -#define TX_OK_CNT 0x00000001 /* TX Frames Sent OK */ -#define TX_SCOLL_CNT 0x00000002 /* TX Frames With Single Collisions */ -#define TX_MCOLL_CNT 0x00000004 /* TX Frames With Multiple Collisions */ -#define TX_OCTET_CNT 0x00000008 /* TX Octets Sent OK */ -#define TX_DEFER_CNT 0x00000010 /* TX Frames With Deferred Transmission */ -#define TX_LATE_CNT 0x00000020 /* TX Frames With Late Collisions */ -#define TX_ABORTC_CNT 0x00000040 /* TX Frames Aborted Due To Excess Collisions */ -#define TX_LOST_CNT 0x00000080 /* TX Frames Lost Due To Internal MAC TX Error */ -#define TX_CRS_CNT 0x00000100 /* TX Frames With Carrier Sense Errors */ -#define TX_UNI_CNT 0x00000200 /* Unicast TX Frames Sent */ -#define TX_MULTI_CNT 0x00000400 /* Multicast TX Frames Sent */ -#define TX_BROAD_CNT 0x00000800 /* Broadcast TX Frames Sent */ -#define TX_EXDEF_CTL 0x00001000 /* TX Frames With Excessive Deferral */ -#define TX_MACCTL_CNT 0x00002000 /* MAC Control TX Frames Sent */ -#define TX_ALLF_CNT 0x00004000 /* All TX Frames Sent */ -#define TX_ALLO_CNT 0x00008000 /* All TX Octets Sent */ -#define TX_EQ64_CNT 0x00010000 /* 64-Byte TX Frames Sent */ -#define TX_LT128_CNT 0x00020000 /* 65-127-Byte TX Frames Sent */ -#define TX_LT256_CNT 0x00040000 /* 128-255-Byte TX Frames Sent */ -#define TX_LT512_CNT 0x00080000 /* 256-511-Byte TX Frames Sent */ -#define TX_LT1024_CNT 0x00100000 /* 512-1023-Byte TX Frames Sent */ -#define TX_GE1024_CNT 0x00200000 /* 1024-Max-Byte TX Frames Sent */ -#define TX_ABORT_CNT 0x00400000 /* TX Frames Aborted */ - -/* SDH Registers */ - -#define SDH_PWR_CTL 0xFFC03900 /* SDH Power Control */ -#define SDH_CLK_CTL 0xFFC03904 /* SDH Clock Control */ -#define SDH_ARGUMENT 0xFFC03908 /* SDH Argument */ -#define SDH_COMMAND 0xFFC0390C /* SDH Command */ -#define SDH_RESP_CMD 0xFFC03910 /* SDH Response Command */ -#define SDH_RESPONSE0 0xFFC03914 /* SDH Response0 */ -#define SDH_RESPONSE1 0xFFC03918 /* SDH Response1 */ -#define SDH_RESPONSE2 0xFFC0391C /* SDH Response2 */ -#define SDH_RESPONSE3 0xFFC03920 /* SDH Response3 */ -#define SDH_DATA_TIMER 0xFFC03924 /* SDH Data Timer */ -#define SDH_DATA_LGTH 0xFFC03928 /* SDH Data Length */ -#define SDH_DATA_CTL 0xFFC0392C /* SDH Data Control */ -#define SDH_DATA_CNT 0xFFC03930 /* SDH Data Counter */ -#define SDH_STATUS 0xFFC03934 /* SDH Status */ -#define SDH_STATUS_CLR 0xFFC03938 /* SDH Status Clear */ -#define SDH_MASK0 0xFFC0393C /* SDH Interrupt0 Mask */ -#define SDH_MASK1 0xFFC03940 /* SDH Interrupt1 Mask */ -#define SDH_FIFO_CNT 0xFFC03948 /* SDH FIFO Counter */ -#define SDH_FIFO 0xFFC03980 /* SDH Data FIFO */ -#define SDH_E_STATUS 0xFFC039C0 /* SDH Exception Status */ -#define SDH_E_MASK 0xFFC039C4 /* SDH Exception Mask */ -#define SDH_CFG 0xFFC039C8 /* SDH Configuration */ -#define SDH_RD_WAIT_EN 0xFFC039CC /* SDH Read Wait Enable */ -#define SDH_PID0 0xFFC039D0 /* SDH Peripheral Identification0 */ -#define SDH_PID1 0xFFC039D4 /* SDH Peripheral Identification1 */ -#define SDH_PID2 0xFFC039D8 /* SDH Peripheral Identification2 */ -#define SDH_PID3 0xFFC039DC /* SDH Peripheral Identification3 */ -#define SDH_PID4 0xFFC039E0 /* SDH Peripheral Identification4 */ -#define SDH_PID5 0xFFC039E4 /* SDH Peripheral Identification5 */ -#define SDH_PID6 0xFFC039E8 /* SDH Peripheral Identification6 */ -#define SDH_PID7 0xFFC039EC /* SDH Peripheral Identification7 */ - -/* Removable Storage Interface Registers */ - -#define RSI_PWR_CONTROL 0xFFC03800 /* RSI Power Control Register */ -#define RSI_CLK_CONTROL 0xFFC03804 /* RSI Clock Control Register */ -#define RSI_ARGUMENT 0xFFC03808 /* RSI Argument Register */ -#define RSI_COMMAND 0xFFC0380C /* RSI Command Register */ -#define RSI_RESP_CMD 0xFFC03810 /* RSI Response Command Register */ -#define RSI_RESPONSE0 0xFFC03814 /* RSI Response Register */ -#define RSI_RESPONSE1 0xFFC03818 /* RSI Response Register */ -#define RSI_RESPONSE2 0xFFC0381C /* RSI Response Register */ -#define RSI_RESPONSE3 0xFFC03820 /* RSI Response Register */ -#define RSI_DATA_TIMER 0xFFC03824 /* RSI Data Timer Register */ -#define RSI_DATA_LGTH 0xFFC03828 /* RSI Data Length Register */ -#define RSI_DATA_CONTROL 0xFFC0382C /* RSI Data Control Register */ -#define RSI_DATA_CNT 0xFFC03830 /* RSI Data Counter Register */ -#define RSI_STATUS 0xFFC03834 /* RSI Status Register */ -#define RSI_STATUSCL 0xFFC03838 /* RSI Status Clear Register */ -#define RSI_MASK0 0xFFC0383C /* RSI Interrupt 0 Mask Register */ -#define RSI_MASK1 0xFFC03840 /* RSI Interrupt 1 Mask Register */ -#define RSI_FIFO_CNT 0xFFC03848 /* RSI FIFO Counter Register */ -#define RSI_CEATA_CONTROL 0xFFC0384C /* RSI CEATA Register */ -#define RSI_FIFO 0xFFC03880 /* RSI Data FIFO Register */ -#define RSI_ESTAT 0xFFC038C0 /* RSI Exception Status Register */ -#define RSI_EMASK 0xFFC038C4 /* RSI Exception Mask Register */ -#define RSI_CONFIG 0xFFC038C8 /* RSI Configuration Register */ -#define RSI_RD_WAIT_EN 0xFFC038CC /* RSI Read Wait Enable Register */ -#define RSI_PID0 0xFFC03FE0 /* RSI Peripheral ID Register 0 */ -#define RSI_PID1 0xFFC03FE4 /* RSI Peripheral ID Register 1 */ -#define RSI_PID2 0xFFC03FE8 /* RSI Peripheral ID Register 2 */ -#define RSI_PID3 0xFFC03FEC /* RSI Peripheral ID Register 3 */ -#define RSI_PID4 0xFFC03FF0 /* RSI Peripheral ID Register 4 */ -#define RSI_PID5 0xFFC03FF4 /* RSI Peripheral ID Register 5 */ -#define RSI_PID6 0xFFC03FF8 /* RSI Peripheral ID Register 6 */ -#define RSI_PID7 0xFFC03FFC /* RSI Peripheral ID Register 7 */ +/* BF518 is BF516 + IEEE-1588 */ +#include "defBF516.h" /* PTP TSYNC Registers */ @@ -489,141 +36,6 @@ #define EMAC_PTP_PPS_STARTHI 0xFFC030F4 /* PPS Start Time High */ #define EMAC_PTP_PPS_PERIOD 0xFFC030F8 /* PPS Count Register */ -/* ********************************************************** */ -/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */ -/* and MULTI BIT READ MACROS */ -/* ********************************************************** */ - -/* Bit masks for SDH_COMMAND */ - -#define CMD_IDX 0x3f /* Command Index */ -#define CMD_RSP 0x40 /* Response */ -#define CMD_L_RSP 0x80 /* Long Response */ -#define CMD_INT_E 0x100 /* Command Interrupt */ -#define CMD_PEND_E 0x200 /* Command Pending */ -#define CMD_E 0x400 /* Command Enable */ - -/* Bit masks for SDH_PWR_CTL */ - -#define PWR_ON 0x3 /* Power On */ -#if 0 -#define TBD 0x3c /* TBD */ -#endif -#define SD_CMD_OD 0x40 /* Open Drain Output */ -#define ROD_CTL 0x80 /* Rod Control */ - -/* Bit masks for SDH_CLK_CTL */ - -#define CLKDIV 0xff /* MC_CLK Divisor */ -#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */ -#define PWR_SV_E 0x200 /* Power Save Enable */ -#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */ -#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */ - -/* Bit masks for SDH_RESP_CMD */ - -#define RESP_CMD 0x3f /* Response Command */ - -/* Bit masks for SDH_DATA_CTL */ - -#define DTX_E 0x1 /* Data Transfer Enable */ -#define DTX_DIR 0x2 /* Data Transfer Direction */ -#define DTX_MODE 0x4 /* Data Transfer Mode */ -#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */ -#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */ - -/* Bit masks for SDH_STATUS */ - -#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */ -#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */ -#define CMD_TIME_OUT 0x4 /* CMD Time Out */ -#define DAT_TIME_OUT 0x8 /* Data Time Out */ -#define TX_UNDERRUN 0x10 /* Transmit Underrun */ -#define RX_OVERRUN 0x20 /* Receive Overrun */ -#define CMD_RESP_END 0x40 /* CMD Response End */ -#define CMD_SENT 0x80 /* CMD Sent */ -#define DAT_END 0x100 /* Data End */ -#define START_BIT_ERR 0x200 /* Start Bit Error */ -#define DAT_BLK_END 0x400 /* Data Block End */ -#define CMD_ACT 0x800 /* CMD Active */ -#define TX_ACT 0x1000 /* Transmit Active */ -#define RX_ACT 0x2000 /* Receive Active */ -#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */ -#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */ -#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */ -#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */ -#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */ -#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */ -#define TX_DAT_RDY 0x100000 /* Transmit Data Available */ -#define RX_FIFO_RDY 0x200000 /* Receive Data Available */ - -/* Bit masks for SDH_STATUS_CLR */ - -#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */ -#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */ -#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */ -#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */ -#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */ -#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */ -#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */ -#define CMD_SENT_STAT 0x80 /* CMD Sent Status */ -#define DAT_END_STAT 0x100 /* Data End Status */ -#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */ -#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */ - -/* Bit masks for SDH_MASK0 */ - -#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */ -#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */ -#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */ -#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */ -#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */ -#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */ -#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */ -#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */ -#define DAT_END_MASK 0x100 /* Data End Mask */ -#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */ -#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */ -#define CMD_ACT_MASK 0x800 /* CMD Active Mask */ -#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */ -#define RX_ACT_MASK 0x2000 /* Receive Active Mask */ -#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */ -#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */ -#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */ -#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */ -#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */ -#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */ -#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */ -#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */ - -/* Bit masks for SDH_FIFO_CNT */ - -#define FIFO_COUNT 0x7fff /* FIFO Count */ - -/* Bit masks for SDH_E_STATUS */ - -#define SDIO_INT_DET 0x2 /* SDIO Int Detected */ -#define SD_CARD_DET 0x10 /* SD Card Detect */ - -/* Bit masks for SDH_E_MASK */ - -#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */ -#define SCD_MSK 0x40 /* Mask Card Detect */ - -/* Bit masks for SDH_CFG */ - -#define CLKS_EN 0x1 /* Clocks Enable */ -#define SD4E 0x4 /* SDIO 4-Bit Enable */ -#define MWE 0x8 /* Moving Window Enable */ -#define SD_RST 0x10 /* SDMMC Reset */ -#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */ -#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */ -#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */ - -/* Bit masks for SDH_RD_WAIT_EN */ - -#define RWR 0x1 /* Read Wait Request */ - /* Bit masks for EMAC_PTP_CTL */ #define PTP_EN 0x1 /* Enable the PTP_TSYNC module */ diff --git a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h index f9fd2b2..9241205 100644 --- a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h +++ b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h @@ -585,58 +585,6 @@ ** modifier UNLESS the lower order bits are saved and ORed back in when ** the macro is used. *************************************************************************************/ -/* -** ********************* PLL AND RESET MASKS ****************************************/ -/* PLL_CTL Masks */ -#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */ -#define PLL_OFF 0x0002 /* PLL Not Powered */ -#define STOPCK 0x0008 /* Core Clock Off */ -#define PDWN 0x0020 /* Enter Deep Sleep Mode */ -#define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */ -#define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */ -#define BYPASS 0x0100 /* Bypass the PLL */ -#define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */ -/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */ -#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */ - -/* PLL_DIV Masks */ -#define SSEL 0x000F /* System Select */ -#define CSEL 0x0030 /* Core Select */ -#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */ -#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */ -#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */ -#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */ -/* PLL_DIV Macros */ -#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */ - -/* VR_CTL Masks */ -#define FREQ 0x3000 /* Switching Oscillator Frequency For Regulator */ -#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */ - -#define VLEV 0x00F0 /* Internal Voltage Level */ -#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ -#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ -#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ -#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ -#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ -#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ -#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ -#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ -#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */ -#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ - -#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ -#define USBWE 0x0200 /* Enable USB Wakeup From Hibernate */ -#define PHYWE 0x0400 /* Enable PHY Wakeup From Hibernate */ -#define CLKBUFOE 0x4000 /* CLKIN Buffer Output Enable */ -#define PHYCLKOE CLKBUFOE /* Alternative legacy name for the above */ -#define SCKELOW 0x8000 /* Enable Drive CKE Low During Reset */ - -/* PLL_STAT Masks */ -#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ -#define FULL_ON 0x0002 /* Processor In Full On Mode */ -#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */ -#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ /* CHIPID Masks */ #define CHIPID_VERSION 0xF0000000 @@ -756,66 +704,6 @@ #define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Wakeup Disable Peripheral #x */ -/* ********* WATCHDOG TIMER MASKS ******************** */ - -/* Watchdog Timer WDOG_CTL Register Masks */ - -#define WDEV(x) (((x)<<1) & 0x0006) /* event generated on roll over */ -#define WDEV_RESET 0x0000 /* generate reset event on roll over */ -#define WDEV_NMI 0x0002 /* generate NMI event on roll over */ -#define WDEV_GPI 0x0004 /* generate GP IRQ on roll over */ -#define WDEV_NONE 0x0006 /* no event on roll over */ -#define WDEN 0x0FF0 /* enable watchdog */ -#define WDDIS 0x0AD0 /* disable watchdog */ -#define WDRO 0x8000 /* watchdog rolled over latch */ - -/* depreciated WDOG_CTL Register Masks for legacy code */ - - -#define ICTL WDEV -#define ENABLE_RESET WDEV_RESET -#define WDOG_RESET WDEV_RESET -#define ENABLE_NMI WDEV_NMI -#define WDOG_NMI WDEV_NMI -#define ENABLE_GPI WDEV_GPI -#define WDOG_GPI WDEV_GPI -#define DISABLE_EVT WDEV_NONE -#define WDOG_NONE WDEV_NONE - -#define TMR_EN WDEN -#define TMR_DIS WDDIS -#define TRO WDRO -#define ICTL_P0 0x01 - #define ICTL_P1 0x02 -#define TRO_P 0x0F - - - -/* *************** REAL TIME CLOCK MASKS **************************/ -/* RTC_STAT and RTC_ALARM Masks */ -#define RTC_SEC 0x0000003F /* Real-Time Clock Seconds */ -#define RTC_MIN 0x00000FC0 /* Real-Time Clock Minutes */ -#define RTC_HR 0x0001F000 /* Real-Time Clock Hours */ -#define RTC_DAY 0xFFFE0000 /* Real-Time Clock Days */ - -/* RTC_ALARM Macro z=day y=hr x=min w=sec */ -#define SET_ALARM(z,y,x,w) ((((z)&0x7FFF)<<0x11)|(((y)&0x1F)<<0xC)|(((x)&0x3F)<<0x6)|((w)&0x3F)) - -/* RTC_ICTL and RTC_ISTAT Masks */ -#define STOPWATCH 0x0001 /* Stopwatch Interrupt Enable */ -#define ALARM 0x0002 /* Alarm Interrupt Enable */ -#define SECOND 0x0004 /* Seconds (1 Hz) Interrupt Enable */ -#define MINUTE 0x0008 /* Minutes Interrupt Enable */ -#define HOUR 0x0010 /* Hours Interrupt Enable */ -#define DAY 0x0020 /* 24 Hours (Days) Interrupt Enable */ -#define DAY_ALARM 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable */ -#define WRITE_PENDING 0x4000 /* Write Pending Status */ -#define WRITE_COMPLETE 0x8000 /* Write Complete Interrupt Enable */ - -/* RTC_FAST / RTC_PREN Mask */ -#define PREN 0x0001 /* Enable Prescaler, RTC Runs @1 Hz */ - - /* ************** UART CONTROLLER MASKS *************************/ /* UARTx_LCR Masks */ #define WLS(x) (((x)-5) & 0x03) /* Word Length Select */ @@ -1372,33 +1260,6 @@ /* ************************** DMA CONTROLLER MASKS ********************************/ -/* DMAx_CONFIG, MDMA_yy_CONFIG Masks */ -#define DMAEN 0x0001 /* DMA Channel Enable */ -#define WNR 0x0002 /* Channel Direction (W/R*) */ -#define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */ -#define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */ -#define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */ -#define DMA2D 0x0010 /* DMA Mode (2D/1D*) */ -#define RESTART 0x0020 /* DMA Buffer Clear */ -#define DI_SEL 0x0040 /* Data Interrupt Timing Select */ -#define DI_EN 0x0080 /* Data Interrupt Enable */ -#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ -#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ -#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ -#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ -#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ -#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ -#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ -#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ -#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ -#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ -#define NDSIZE 0x0900 /* Next Descriptor Size */ -#define DMAFLOW 0x7000 /* Flow Control */ -#define DMAFLOW_STOP 0x0000 /* Stop Mode */ -#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ -#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ -#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ -#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ /* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */ #define CTYPE 0x0040 /* DMA Channel Type Indicator (Memory/Peripheral*) */ @@ -1416,13 +1277,6 @@ #define PMAP_UART1RX 0xA000 /* UART1 Port Receive DMA */ #define PMAP_UART1TX 0xB000 /* UART1 Port Transmit DMA */ -/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */ -#define DMA_DONE 0x0001 /* DMA Completion Interrupt Status */ -#define DMA_ERR 0x0002 /* DMA Error Interrupt Status */ -#define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */ -#define DMA_RUN 0x0008 /* DMA Channel Running Indicator */ - - /* ************ PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************/ /* PPI_CONTROL Masks */ #define PORT_EN 0x0001 /* PPI Port Enable */ @@ -1830,46 +1684,6 @@ #define BNDMODE_CAPT 0x2000 /* boundary capture mode */ #define BNDMODE_AEXT 0x3000 /* boundary auto-extend mode */ -/* Bit masks for OTP_CONTROL */ - -#define FUSE_FADDR 0x1ff /* OTP/Fuse Address */ -#define FIEN 0x800 /* OTP/Fuse Interrupt Enable */ -#define nFIEN 0x0 -#define FTESTDEC 0x1000 /* OTP/Fuse Test Decoder */ -#define nFTESTDEC 0x0 -#define FWRTEST 0x2000 /* OTP/Fuse Write Test */ -#define nFWRTEST 0x0 -#define FRDEN 0x4000 /* OTP/Fuse Read Enable */ -#define nFRDEN 0x0 -#define FWREN 0x8000 /* OTP/Fuse Write Enable */ -#define nFWREN 0x0 - -/* Bit masks for OTP_BEN */ - -#define FBEN 0xffff /* OTP/Fuse Byte Enable */ - -/* Bit masks for OTP_STATUS */ - -#define FCOMP 0x1 /* OTP/Fuse Access Complete */ -#define nFCOMP 0x0 -#define FERROR 0x2 /* OTP/Fuse Access Error */ -#define nFERROR 0x0 -#define MMRGLOAD 0x10 /* Memory Mapped Register Gasket Load */ -#define nMMRGLOAD 0x0 -#define MMRGLOCK 0x20 /* Memory Mapped Register Gasket Lock */ -#define nMMRGLOCK 0x0 -#define FPGMEN 0x40 /* OTP/Fuse Program Enable */ -#define nFPGMEN 0x0 - -/* Bit masks for OTP_TIMING */ - -#define USECDIV 0xff /* Micro Second Divider */ -#define READACC 0x7f00 /* Read Access Time */ -#define CPUMPRL 0x38000 /* Charge Pump Release Time */ -#define CPUMPSU 0xc0000 /* Charge Pump Setup Time */ -#define CPUMPHD 0xf00000 /* Charge Pump Hold Time */ -#define PGMTIME 0xff000000 /* Program Time */ - /* Bit masks for SECURE_SYSSWT */ #define EMUDABL 0x1 /* Emulation Disable. */ diff --git a/arch/blackfin/mach-bf527/Kconfig b/arch/blackfin/mach-bf527/Kconfig index 848ac6f..1f8cbe9 100644 --- a/arch/blackfin/mach-bf527/Kconfig +++ b/arch/blackfin/mach-bf527/Kconfig @@ -1,3 +1,7 @@ +config BF52x + def_bool y + depends on (BF522 || BF523 || BF524 || BF525 || BF526 || BF527) + if (BF52x) source "arch/blackfin/mach-bf527/boards/Kconfig" diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c index f1996b1..7ab0800 100644 --- a/arch/blackfin/mach-bf527/boards/cm_bf527.c +++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -15,9 +15,6 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/etherdevice.h> -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) -#include <linux/usb/isp1362.h> -#endif #include <linux/i2c.h> #include <linux/irq.h> #include <linux/interrupt.h> @@ -65,7 +62,7 @@ static struct isp1760_platform_data isp1760_priv = { }; static struct platform_device bfin_isp1760_device = { - .name = "isp1760-hcd", + .name = "isp1760", .id = 0, .dev = { .platform_data = &isp1760_priv, @@ -317,45 +314,6 @@ static struct platform_device sl811_hcd_device = { }; #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) -static struct resource isp1362_hcd_resources[] = { - { - .start = 0x20360000, - .end = 0x20360000, - .flags = IORESOURCE_MEM, - }, { - .start = 0x20360004, - .end = 0x20360004, - .flags = IORESOURCE_MEM, - }, { - .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, - .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; - -static struct isp1362_platform_data isp1362_priv = { - .sel15Kres = 1, - .clknotstop = 0, - .oc_enable = 0, - .int_act_high = 0, - .int_edge_triggered = 0, - .remote_wakeup_connected = 0, - .no_power_switching = 1, - .power_switching_mode = 0, -}; - -static struct platform_device isp1362_hcd_device = { - .name = "isp1362-hcd", - .id = 0, - .dev = { - .platform_data = &isp1362_priv, - }, - .num_resources = ARRAY_SIZE(isp1362_hcd_resources), - .resource = isp1362_hcd_resources, -}; -#endif - #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) static struct platform_device bfin_mii_bus = { .name = "bfin_mii_bus", @@ -841,10 +799,6 @@ static struct platform_device *cmbf527_devices[] __initdata = { &sl811_hcd_device, #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) - &isp1362_hcd_device, -#endif - #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) &bfin_isp1760_device, #endif diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index f09665f..5294fdd 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -13,9 +13,6 @@ #include <linux/mtd/physmap.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) -#include <linux/usb/isp1362.h> -#endif #include <linux/i2c.h> #include <linux/irq.h> #include <linux/interrupt.h> @@ -63,7 +60,7 @@ static struct isp1760_platform_data isp1760_priv = { }; static struct platform_device bfin_isp1760_device = { - .name = "isp1760-hcd", + .name = "isp1760", .id = 0, .dev = { .platform_data = &isp1760_priv, @@ -373,45 +370,6 @@ static struct platform_device sl811_hcd_device = { }; #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) -static struct resource isp1362_hcd_resources[] = { - { - .start = 0x20360000, - .end = 0x20360000, - .flags = IORESOURCE_MEM, - }, { - .start = 0x20360004, - .end = 0x20360004, - .flags = IORESOURCE_MEM, - }, { - .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, - .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; - -static struct isp1362_platform_data isp1362_priv = { - .sel15Kres = 1, - .clknotstop = 0, - .oc_enable = 0, - .int_act_high = 0, - .int_edge_triggered = 0, - .remote_wakeup_connected = 0, - .no_power_switching = 1, - .power_switching_mode = 0, -}; - -static struct platform_device isp1362_hcd_device = { - .name = "isp1362-hcd", - .id = 0, - .dev = { - .platform_data = &isp1362_priv, - }, - .num_resources = ARRAY_SIZE(isp1362_hcd_resources), - .resource = isp1362_hcd_resources, -}; -#endif - #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) static struct platform_device bfin_mii_bus = { .name = "bfin_mii_bus", @@ -688,12 +646,6 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) -static struct platform_device bfin_fb_device = { - .name = "bf537-lq035", -}; -#endif - #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) static struct resource bfin_uart_resources[] = { #ifdef CONFIG_SERIAL_BFIN_UART0 @@ -850,7 +802,7 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif -#if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE) +#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE) #include <linux/input.h> #include <asm/bfin_rotary.h> @@ -924,10 +876,6 @@ static struct platform_device *stamp_devices[] __initdata = { &sl811_hcd_device, #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) - &isp1362_hcd_device, -#endif - #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) &bfin_isp1760_device, #endif @@ -957,10 +905,6 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_spi0_device, #endif -#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) - &bfin_fb_device, -#endif - #if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE) &bf52x_t350mcqb_device, #endif @@ -991,7 +935,7 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_device_gpiokeys, #endif -#if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE) +#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE) &bfin_rotary_device, #endif diff --git a/arch/blackfin/mach-bf527/include/mach/blackfin.h b/arch/blackfin/mach-bf527/include/mach/blackfin.h index e7d6034..f714c5d 100644 --- a/arch/blackfin/mach-bf527/include/mach/blackfin.h +++ b/arch/blackfin/mach-bf527/include/mach/blackfin.h @@ -46,10 +46,4 @@ #define OFFSET_SCR 0x1C /* SCR Scratch Register */ #define OFFSET_GCTL 0x24 /* Global Control Register */ -/* PLL_DIV Masks */ -#define CCLK_DIV1 CSEL_DIV1 /* CCLK = VCO / 1 */ -#define CCLK_DIV2 CSEL_DIV2 /* CCLK = VCO / 2 */ -#define CCLK_DIV4 CSEL_DIV4 /* CCLK = VCO / 4 */ -#define CCLK_DIV8 CSEL_DIV8 /* CCLK = VCO / 8 */ - #endif diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF525.h b/arch/blackfin/mach-bf527/include/mach/cdefBF525.h index dc3119e9..d7e2751 100644 --- a/arch/blackfin/mach-bf527/include/mach/cdefBF525.h +++ b/arch/blackfin/mach-bf527/include/mach/cdefBF525.h @@ -10,15 +10,8 @@ /* include all Core registers and bit definitions */ #include "defBF525.h" -/* include core specific register pointer definitions */ -#include <asm/cdef_LPBlackfin.h> - -/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF525 */ - -/* include cdefBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */ -#include "cdefBF52x_base.h" - -/* The following are the #defines needed by ADSP-BF525 that are not in the common header */ +/* BF525 is BF522 + USB */ +#include "cdefBF522.h" /* USB Control Registers */ diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF527.h b/arch/blackfin/mach-bf527/include/mach/cdefBF527.h index d6579449..c7ba544 100644 --- a/arch/blackfin/mach-bf527/include/mach/cdefBF527.h +++ b/arch/blackfin/mach-bf527/include/mach/cdefBF527.h @@ -10,15 +10,8 @@ /* include all Core registers and bit definitions */ #include "defBF527.h" -/* include core specific register pointer definitions */ -#include <asm/cdef_LPBlackfin.h> - -/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF527 */ - -/* include cdefBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */ -#include "cdefBF52x_base.h" - -/* The following are the #defines needed by ADSP-BF527 that are not in the common header */ +/* BF527 is BF525 + EMAC */ +#include "cdefBF525.h" /* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */ @@ -185,417 +178,4 @@ #define bfin_read_EMAC_TXC_ABORT() bfin_read32(EMAC_TXC_ABORT) #define bfin_write_EMAC_TXC_ABORT(val) bfin_write32(EMAC_TXC_ABORT, val) -/* USB Control Registers */ - -#define bfin_read_USB_FADDR() bfin_read16(USB_FADDR) -#define bfin_write_USB_FADDR(val) bfin_write16(USB_FADDR, val) -#define bfin_read_USB_POWER() bfin_read16(USB_POWER) -#define bfin_write_USB_POWER(val) bfin_write16(USB_POWER, val) -#define bfin_read_USB_INTRTX() bfin_read16(USB_INTRTX) -#define bfin_write_USB_INTRTX(val) bfin_write16(USB_INTRTX, val) -#define bfin_read_USB_INTRRX() bfin_read16(USB_INTRRX) -#define bfin_write_USB_INTRRX(val) bfin_write16(USB_INTRRX, val) -#define bfin_read_USB_INTRTXE() bfin_read16(USB_INTRTXE) -#define bfin_write_USB_INTRTXE(val) bfin_write16(USB_INTRTXE, val) -#define bfin_read_USB_INTRRXE() bfin_read16(USB_INTRRXE) -#define bfin_write_USB_INTRRXE(val) bfin_write16(USB_INTRRXE, val) -#define bfin_read_USB_INTRUSB() bfin_read16(USB_INTRUSB) -#define bfin_write_USB_INTRUSB(val) bfin_write16(USB_INTRUSB, val) -#define bfin_read_USB_INTRUSBE() bfin_read16(USB_INTRUSBE) -#define bfin_write_USB_INTRUSBE(val) bfin_write16(USB_INTRUSBE, val) -#define bfin_read_USB_FRAME() bfin_read16(USB_FRAME) -#define bfin_write_USB_FRAME(val) bfin_write16(USB_FRAME, val) -#define bfin_read_USB_INDEX() bfin_read16(USB_INDEX) -#define bfin_write_USB_INDEX(val) bfin_write16(USB_INDEX, val) -#define bfin_read_USB_TESTMODE() bfin_read16(USB_TESTMODE) -#define bfin_write_USB_TESTMODE(val) bfin_write16(USB_TESTMODE, val) -#define bfin_read_USB_GLOBINTR() bfin_read16(USB_GLOBINTR) -#define bfin_write_USB_GLOBINTR(val) bfin_write16(USB_GLOBINTR, val) -#define bfin_read_USB_GLOBAL_CTL() bfin_read16(USB_GLOBAL_CTL) -#define bfin_write_USB_GLOBAL_CTL(val) bfin_write16(USB_GLOBAL_CTL, val) - -/* USB Packet Control Registers */ - -#define bfin_read_USB_TX_MAX_PACKET() bfin_read16(USB_TX_MAX_PACKET) -#define bfin_write_USB_TX_MAX_PACKET(val) bfin_write16(USB_TX_MAX_PACKET, val) -#define bfin_read_USB_CSR0() bfin_read16(USB_CSR0) -#define bfin_write_USB_CSR0(val) bfin_write16(USB_CSR0, val) -#define bfin_read_USB_TXCSR() bfin_read16(USB_TXCSR) -#define bfin_write_USB_TXCSR(val) bfin_write16(USB_TXCSR, val) -#define bfin_read_USB_RX_MAX_PACKET() bfin_read16(USB_RX_MAX_PACKET) -#define bfin_write_USB_RX_MAX_PACKET(val) bfin_write16(USB_RX_MAX_PACKET, val) -#define bfin_read_USB_RXCSR() bfin_read16(USB_RXCSR) -#define bfin_write_USB_RXCSR(val) bfin_write16(USB_RXCSR, val) -#define bfin_read_USB_COUNT0() bfin_read16(USB_COUNT0) -#define bfin_write_USB_COUNT0(val) bfin_write16(USB_COUNT0, val) -#define bfin_read_USB_RXCOUNT() bfin_read16(USB_RXCOUNT) -#define bfin_write_USB_RXCOUNT(val) bfin_write16(USB_RXCOUNT, val) -#define bfin_read_USB_TXTYPE() bfin_read16(USB_TXTYPE) -#define bfin_write_USB_TXTYPE(val) bfin_write16(USB_TXTYPE, val) -#define bfin_read_USB_NAKLIMIT0() bfin_read16(USB_NAKLIMIT0) -#define bfin_write_USB_NAKLIMIT0(val) bfin_write16(USB_NAKLIMIT0, val) -#define bfin_read_USB_TXINTERVAL() bfin_read16(USB_TXINTERVAL) -#define bfin_write_USB_TXINTERVAL(val) bfin_write16(USB_TXINTERVAL, val) -#define bfin_read_USB_RXTYPE() bfin_read16(USB_RXTYPE) -#define bfin_write_USB_RXTYPE(val) bfin_write16(USB_RXTYPE, val) -#define bfin_read_USB_RXINTERVAL() bfin_read16(USB_RXINTERVAL) -#define bfin_write_USB_RXINTERVAL(val) bfin_write16(USB_RXINTERVAL, val) -#define bfin_read_USB_TXCOUNT() bfin_read16(USB_TXCOUNT) -#define bfin_write_USB_TXCOUNT(val) bfin_write16(USB_TXCOUNT, val) - -/* USB Endpoint FIFO Registers */ - -#define bfin_read_USB_EP0_FIFO() bfin_read16(USB_EP0_FIFO) -#define bfin_write_USB_EP0_FIFO(val) bfin_write16(USB_EP0_FIFO, val) -#define bfin_read_USB_EP1_FIFO() bfin_read16(USB_EP1_FIFO) -#define bfin_write_USB_EP1_FIFO(val) bfin_write16(USB_EP1_FIFO, val) -#define bfin_read_USB_EP2_FIFO() bfin_read16(USB_EP2_FIFO) -#define bfin_write_USB_EP2_FIFO(val) bfin_write16(USB_EP2_FIFO, val) -#define bfin_read_USB_EP3_FIFO() bfin_read16(USB_EP3_FIFO) -#define bfin_write_USB_EP3_FIFO(val) bfin_write16(USB_EP3_FIFO, val) -#define bfin_read_USB_EP4_FIFO() bfin_read16(USB_EP4_FIFO) -#define bfin_write_USB_EP4_FIFO(val) bfin_write16(USB_EP4_FIFO, val) -#define bfin_read_USB_EP5_FIFO() bfin_read16(USB_EP5_FIFO) -#define bfin_write_USB_EP5_FIFO(val) bfin_write16(USB_EP5_FIFO, val) -#define bfin_read_USB_EP6_FIFO() bfin_read16(USB_EP6_FIFO) -#define bfin_write_USB_EP6_FIFO(val) bfin_write16(USB_EP6_FIFO, val) -#define bfin_read_USB_EP7_FIFO() bfin_read16(USB_EP7_FIFO) -#define bfin_write_USB_EP7_FIFO(val) bfin_write16(USB_EP7_FIFO, val) - -/* USB OTG Control Registers */ - -#define bfin_read_USB_OTG_DEV_CTL() bfin_read16(USB_OTG_DEV_CTL) -#define bfin_write_USB_OTG_DEV_CTL(val) bfin_write16(USB_OTG_DEV_CTL, val) -#define bfin_read_USB_OTG_VBUS_IRQ() bfin_read16(USB_OTG_VBUS_IRQ) -#define bfin_write_USB_OTG_VBUS_IRQ(val) bfin_write16(USB_OTG_VBUS_IRQ, val) -#define bfin_read_USB_OTG_VBUS_MASK() bfin_read16(USB_OTG_VBUS_MASK) -#define bfin_write_USB_OTG_VBUS_MASK(val) bfin_write16(USB_OTG_VBUS_MASK, val) - -/* USB Phy Control Registers */ - -#define bfin_read_USB_LINKINFO() bfin_read16(USB_LINKINFO) -#define bfin_write_USB_LINKINFO(val) bfin_write16(USB_LINKINFO, val) -#define bfin_read_USB_VPLEN() bfin_read16(USB_VPLEN) -#define bfin_write_USB_VPLEN(val) bfin_write16(USB_VPLEN, val) -#define bfin_read_USB_HS_EOF1() bfin_read16(USB_HS_EOF1) -#define bfin_write_USB_HS_EOF1(val) bfin_write16(USB_HS_EOF1, val) -#define bfin_read_USB_FS_EOF1() bfin_read16(USB_FS_EOF1) -#define bfin_write_USB_FS_EOF1(val) bfin_write16(USB_FS_EOF1, val) -#define bfin_read_USB_LS_EOF1() bfin_read16(USB_LS_EOF1) -#define bfin_write_USB_LS_EOF1(val) bfin_write16(USB_LS_EOF1, val) - -/* (APHY_CNTRL is for ADI usage only) */ - -#define bfin_read_USB_APHY_CNTRL() bfin_read16(USB_APHY_CNTRL) -#define bfin_write_USB_APHY_CNTRL(val) bfin_write16(USB_APHY_CNTRL, val) - -/* (APHY_CALIB is for ADI usage only) */ - -#define bfin_read_USB_APHY_CALIB() bfin_read16(USB_APHY_CALIB) -#define bfin_write_USB_APHY_CALIB(val) bfin_write16(USB_APHY_CALIB, val) - -#define bfin_read_USB_APHY_CNTRL2() bfin_read16(USB_APHY_CNTRL2) -#define bfin_write_USB_APHY_CNTRL2(val) bfin_write16(USB_APHY_CNTRL2, val) - -/* (PHY_TEST is for ADI usage only) */ - -#define bfin_read_USB_PHY_TEST() bfin_read16(USB_PHY_TEST) -#define bfin_write_USB_PHY_TEST(val) bfin_write16(USB_PHY_TEST, val) - -#define bfin_read_USB_PLLOSC_CTRL() bfin_read16(USB_PLLOSC_CTRL) -#define bfin_write_USB_PLLOSC_CTRL(val) bfin_write16(USB_PLLOSC_CTRL, val) -#define bfin_read_USB_SRP_CLKDIV() bfin_read16(USB_SRP_CLKDIV) -#define bfin_write_USB_SRP_CLKDIV(val) bfin_write16(USB_SRP_CLKDIV, val) - -/* USB Endpoint 0 Control Registers */ - -#define bfin_read_USB_EP_NI0_TXMAXP() bfin_read16(USB_EP_NI0_TXMAXP) -#define bfin_write_USB_EP_NI0_TXMAXP(val) bfin_write16(USB_EP_NI0_TXMAXP, val) -#define bfin_read_USB_EP_NI0_TXCSR() bfin_read16(USB_EP_NI0_TXCSR) -#define bfin_write_USB_EP_NI0_TXCSR(val) bfin_write16(USB_EP_NI0_TXCSR, val) -#define bfin_read_USB_EP_NI0_RXMAXP() bfin_read16(USB_EP_NI0_RXMAXP) -#define bfin_write_USB_EP_NI0_RXMAXP(val) bfin_write16(USB_EP_NI0_RXMAXP, val) -#define bfin_read_USB_EP_NI0_RXCSR() bfin_read16(USB_EP_NI0_RXCSR) -#define bfin_write_USB_EP_NI0_RXCSR(val) bfin_write16(USB_EP_NI0_RXCSR, val) -#define bfin_read_USB_EP_NI0_RXCOUNT() bfin_read16(USB_EP_NI0_RXCOUNT) -#define bfin_write_USB_EP_NI0_RXCOUNT(val) bfin_write16(USB_EP_NI0_RXCOUNT, val) -#define bfin_read_USB_EP_NI0_TXTYPE() bfin_read16(USB_EP_NI0_TXTYPE) -#define bfin_write_USB_EP_NI0_TXTYPE(val) bfin_write16(USB_EP_NI0_TXTYPE, val) -#define bfin_read_USB_EP_NI0_TXINTERVAL() bfin_read16(USB_EP_NI0_TXINTERVAL) -#define bfin_write_USB_EP_NI0_TXINTERVAL(val) bfin_write16(USB_EP_NI0_TXINTERVAL, val) -#define bfin_read_USB_EP_NI0_RXTYPE() bfin_read16(USB_EP_NI0_RXTYPE) -#define bfin_write_USB_EP_NI0_RXTYPE(val) bfin_write16(USB_EP_NI0_RXTYPE, val) -#define bfin_read_USB_EP_NI0_RXINTERVAL() bfin_read16(USB_EP_NI0_RXINTERVAL) -#define bfin_write_USB_EP_NI0_RXINTERVAL(val) bfin_write16(USB_EP_NI0_RXINTERVAL, val) -#define bfin_read_USB_EP_NI0_TXCOUNT() bfin_read16(USB_EP_NI0_TXCOUNT) -#define bfin_write_USB_EP_NI0_TXCOUNT(val) bfin_write16(USB_EP_NI0_TXCOUNT, val) - -/* USB Endpoint 1 Control Registers */ - -#define bfin_read_USB_EP_NI1_TXMAXP() bfin_read16(USB_EP_NI1_TXMAXP) -#define bfin_write_USB_EP_NI1_TXMAXP(val) bfin_write16(USB_EP_NI1_TXMAXP, val) -#define bfin_read_USB_EP_NI1_TXCSR() bfin_read16(USB_EP_NI1_TXCSR) -#define bfin_write_USB_EP_NI1_TXCSR(val) bfin_write16(USB_EP_NI1_TXCSR, val) -#define bfin_read_USB_EP_NI1_RXMAXP() bfin_read16(USB_EP_NI1_RXMAXP) -#define bfin_write_USB_EP_NI1_RXMAXP(val) bfin_write16(USB_EP_NI1_RXMAXP, val) -#define bfin_read_USB_EP_NI1_RXCSR() bfin_read16(USB_EP_NI1_RXCSR) -#define bfin_write_USB_EP_NI1_RXCSR(val) bfin_write16(USB_EP_NI1_RXCSR, val) -#define bfin_read_USB_EP_NI1_RXCOUNT() bfin_read16(USB_EP_NI1_RXCOUNT) -#define bfin_write_USB_EP_NI1_RXCOUNT(val) bfin_write16(USB_EP_NI1_RXCOUNT, val) -#define bfin_read_USB_EP_NI1_TXTYPE() bfin_read16(USB_EP_NI1_TXTYPE) -#define bfin_write_USB_EP_NI1_TXTYPE(val) bfin_write16(USB_EP_NI1_TXTYPE, val) -#define bfin_read_USB_EP_NI1_TXINTERVAL() bfin_read16(USB_EP_NI1_TXINTERVAL) -#define bfin_write_USB_EP_NI1_TXINTERVAL(val) bfin_write16(USB_EP_NI1_TXINTERVAL, val) -#define bfin_read_USB_EP_NI1_RXTYPE() bfin_read16(USB_EP_NI1_RXTYPE) -#define bfin_write_USB_EP_NI1_RXTYPE(val) bfin_write16(USB_EP_NI1_RXTYPE, val) -#define bfin_read_USB_EP_NI1_RXINTERVAL() bfin_read16(USB_EP_NI1_RXINTERVAL) -#define bfin_write_USB_EP_NI1_RXINTERVAL(val) bfin_write16(USB_EP_NI1_RXINTERVAL, val) -#define bfin_read_USB_EP_NI1_TXCOUNT() bfin_read16(USB_EP_NI1_TXCOUNT) -#define bfin_write_USB_EP_NI1_TXCOUNT(val) bfin_write16(USB_EP_NI1_TXCOUNT, val) - -/* USB Endpoint 2 Control Registers */ - -#define bfin_read_USB_EP_NI2_TXMAXP() bfin_read16(USB_EP_NI2_TXMAXP) -#define bfin_write_USB_EP_NI2_TXMAXP(val) bfin_write16(USB_EP_NI2_TXMAXP, val) -#define bfin_read_USB_EP_NI2_TXCSR() bfin_read16(USB_EP_NI2_TXCSR) -#define bfin_write_USB_EP_NI2_TXCSR(val) bfin_write16(USB_EP_NI2_TXCSR, val) -#define bfin_read_USB_EP_NI2_RXMAXP() bfin_read16(USB_EP_NI2_RXMAXP) -#define bfin_write_USB_EP_NI2_RXMAXP(val) bfin_write16(USB_EP_NI2_RXMAXP, val) -#define bfin_read_USB_EP_NI2_RXCSR() bfin_read16(USB_EP_NI2_RXCSR) -#define bfin_write_USB_EP_NI2_RXCSR(val) bfin_write16(USB_EP_NI2_RXCSR, val) -#define bfin_read_USB_EP_NI2_RXCOUNT() bfin_read16(USB_EP_NI2_RXCOUNT) -#define bfin_write_USB_EP_NI2_RXCOUNT(val) bfin_write16(USB_EP_NI2_RXCOUNT, val) -#define bfin_read_USB_EP_NI2_TXTYPE() bfin_read16(USB_EP_NI2_TXTYPE) -#define bfin_write_USB_EP_NI2_TXTYPE(val) bfin_write16(USB_EP_NI2_TXTYPE, val) -#define bfin_read_USB_EP_NI2_TXINTERVAL() bfin_read16(USB_EP_NI2_TXINTERVAL) -#define bfin_write_USB_EP_NI2_TXINTERVAL(val) bfin_write16(USB_EP_NI2_TXINTERVAL, val) -#define bfin_read_USB_EP_NI2_RXTYPE() bfin_read16(USB_EP_NI2_RXTYPE) -#define bfin_write_USB_EP_NI2_RXTYPE(val) bfin_write16(USB_EP_NI2_RXTYPE, val) -#define bfin_read_USB_EP_NI2_RXINTERVAL() bfin_read16(USB_EP_NI2_RXINTERVAL) -#define bfin_write_USB_EP_NI2_RXINTERVAL(val) bfin_write16(USB_EP_NI2_RXINTERVAL, val) -#define bfin_read_USB_EP_NI2_TXCOUNT() bfin_read16(USB_EP_NI2_TXCOUNT) -#define bfin_write_USB_EP_NI2_TXCOUNT(val) bfin_write16(USB_EP_NI2_TXCOUNT, val) - -/* USB Endpoint 3 Control Registers */ - -#define bfin_read_USB_EP_NI3_TXMAXP() bfin_read16(USB_EP_NI3_TXMAXP) -#define bfin_write_USB_EP_NI3_TXMAXP(val) bfin_write16(USB_EP_NI3_TXMAXP, val) -#define bfin_read_USB_EP_NI3_TXCSR() bfin_read16(USB_EP_NI3_TXCSR) -#define bfin_write_USB_EP_NI3_TXCSR(val) bfin_write16(USB_EP_NI3_TXCSR, val) -#define bfin_read_USB_EP_NI3_RXMAXP() bfin_read16(USB_EP_NI3_RXMAXP) -#define bfin_write_USB_EP_NI3_RXMAXP(val) bfin_write16(USB_EP_NI3_RXMAXP, val) -#define bfin_read_USB_EP_NI3_RXCSR() bfin_read16(USB_EP_NI3_RXCSR) -#define bfin_write_USB_EP_NI3_RXCSR(val) bfin_write16(USB_EP_NI3_RXCSR, val) -#define bfin_read_USB_EP_NI3_RXCOUNT() bfin_read16(USB_EP_NI3_RXCOUNT) -#define bfin_write_USB_EP_NI3_RXCOUNT(val) bfin_write16(USB_EP_NI3_RXCOUNT, val) -#define bfin_read_USB_EP_NI3_TXTYPE() bfin_read16(USB_EP_NI3_TXTYPE) -#define bfin_write_USB_EP_NI3_TXTYPE(val) bfin_write16(USB_EP_NI3_TXTYPE, val) -#define bfin_read_USB_EP_NI3_TXINTERVAL() bfin_read16(USB_EP_NI3_TXINTERVAL) -#define bfin_write_USB_EP_NI3_TXINTERVAL(val) bfin_write16(USB_EP_NI3_TXINTERVAL, val) -#define bfin_read_USB_EP_NI3_RXTYPE() bfin_read16(USB_EP_NI3_RXTYPE) -#define bfin_write_USB_EP_NI3_RXTYPE(val) bfin_write16(USB_EP_NI3_RXTYPE, val) -#define bfin_read_USB_EP_NI3_RXINTERVAL() bfin_read16(USB_EP_NI3_RXINTERVAL) -#define bfin_write_USB_EP_NI3_RXINTERVAL(val) bfin_write16(USB_EP_NI3_RXINTERVAL, val) -#define bfin_read_USB_EP_NI3_TXCOUNT() bfin_read16(USB_EP_NI3_TXCOUNT) -#define bfin_write_USB_EP_NI3_TXCOUNT(val) bfin_write16(USB_EP_NI3_TXCOUNT, val) - -/* USB Endpoint 4 Control Registers */ - -#define bfin_read_USB_EP_NI4_TXMAXP() bfin_read16(USB_EP_NI4_TXMAXP) -#define bfin_write_USB_EP_NI4_TXMAXP(val) bfin_write16(USB_EP_NI4_TXMAXP, val) -#define bfin_read_USB_EP_NI4_TXCSR() bfin_read16(USB_EP_NI4_TXCSR) -#define bfin_write_USB_EP_NI4_TXCSR(val) bfin_write16(USB_EP_NI4_TXCSR, val) -#define bfin_read_USB_EP_NI4_RXMAXP() bfin_read16(USB_EP_NI4_RXMAXP) -#define bfin_write_USB_EP_NI4_RXMAXP(val) bfin_write16(USB_EP_NI4_RXMAXP, val) -#define bfin_read_USB_EP_NI4_RXCSR() bfin_read16(USB_EP_NI4_RXCSR) -#define bfin_write_USB_EP_NI4_RXCSR(val) bfin_write16(USB_EP_NI4_RXCSR, val) -#define bfin_read_USB_EP_NI4_RXCOUNT() bfin_read16(USB_EP_NI4_RXCOUNT) -#define bfin_write_USB_EP_NI4_RXCOUNT(val) bfin_write16(USB_EP_NI4_RXCOUNT, val) -#define bfin_read_USB_EP_NI4_TXTYPE() bfin_read16(USB_EP_NI4_TXTYPE) -#define bfin_write_USB_EP_NI4_TXTYPE(val) bfin_write16(USB_EP_NI4_TXTYPE, val) -#define bfin_read_USB_EP_NI4_TXINTERVAL() bfin_read16(USB_EP_NI4_TXINTERVAL) -#define bfin_write_USB_EP_NI4_TXINTERVAL(val) bfin_write16(USB_EP_NI4_TXINTERVAL, val) -#define bfin_read_USB_EP_NI4_RXTYPE() bfin_read16(USB_EP_NI4_RXTYPE) -#define bfin_write_USB_EP_NI4_RXTYPE(val) bfin_write16(USB_EP_NI4_RXTYPE, val) -#define bfin_read_USB_EP_NI4_RXINTERVAL() bfin_read16(USB_EP_NI4_RXINTERVAL) -#define bfin_write_USB_EP_NI4_RXINTERVAL(val) bfin_write16(USB_EP_NI4_RXINTERVAL, val) -#define bfin_read_USB_EP_NI4_TXCOUNT() bfin_read16(USB_EP_NI4_TXCOUNT) -#define bfin_write_USB_EP_NI4_TXCOUNT(val) bfin_write16(USB_EP_NI4_TXCOUNT, val) - -/* USB Endpoint 5 Control Registers */ - -#define bfin_read_USB_EP_NI5_TXMAXP() bfin_read16(USB_EP_NI5_TXMAXP) -#define bfin_write_USB_EP_NI5_TXMAXP(val) bfin_write16(USB_EP_NI5_TXMAXP, val) -#define bfin_read_USB_EP_NI5_TXCSR() bfin_read16(USB_EP_NI5_TXCSR) -#define bfin_write_USB_EP_NI5_TXCSR(val) bfin_write16(USB_EP_NI5_TXCSR, val) -#define bfin_read_USB_EP_NI5_RXMAXP() bfin_read16(USB_EP_NI5_RXMAXP) -#define bfin_write_USB_EP_NI5_RXMAXP(val) bfin_write16(USB_EP_NI5_RXMAXP, val) -#define bfin_read_USB_EP_NI5_RXCSR() bfin_read16(USB_EP_NI5_RXCSR) -#define bfin_write_USB_EP_NI5_RXCSR(val) bfin_write16(USB_EP_NI5_RXCSR, val) -#define bfin_read_USB_EP_NI5_RXCOUNT() bfin_read16(USB_EP_NI5_RXCOUNT) -#define bfin_write_USB_EP_NI5_RXCOUNT(val) bfin_write16(USB_EP_NI5_RXCOUNT, val) -#define bfin_read_USB_EP_NI5_TXTYPE() bfin_read16(USB_EP_NI5_TXTYPE) -#define bfin_write_USB_EP_NI5_TXTYPE(val) bfin_write16(USB_EP_NI5_TXTYPE, val) -#define bfin_read_USB_EP_NI5_TXINTERVAL() bfin_read16(USB_EP_NI5_TXINTERVAL) -#define bfin_write_USB_EP_NI5_TXINTERVAL(val) bfin_write16(USB_EP_NI5_TXINTERVAL, val) -#define bfin_read_USB_EP_NI5_RXTYPE() bfin_read16(USB_EP_NI5_RXTYPE) -#define bfin_write_USB_EP_NI5_RXTYPE(val) bfin_write16(USB_EP_NI5_RXTYPE, val) -#define bfin_read_USB_EP_NI5_RXINTERVAL() bfin_read16(USB_EP_NI5_RXINTERVAL) -#define bfin_write_USB_EP_NI5_RXINTERVAL(val) bfin_write16(USB_EP_NI5_RXINTERVAL, val) -#define bfin_read_USB_EP_NI5_TXCOUNT() bfin_read16(USB_EP_NI5_TXCOUNT) -#define bfin_write_USB_EP_NI5_TXCOUNT(val) bfin_write16(USB_EP_NI5_TXCOUNT, val) - -/* USB Endpoint 6 Control Registers */ - -#define bfin_read_USB_EP_NI6_TXMAXP() bfin_read16(USB_EP_NI6_TXMAXP) -#define bfin_write_USB_EP_NI6_TXMAXP(val) bfin_write16(USB_EP_NI6_TXMAXP, val) -#define bfin_read_USB_EP_NI6_TXCSR() bfin_read16(USB_EP_NI6_TXCSR) -#define bfin_write_USB_EP_NI6_TXCSR(val) bfin_write16(USB_EP_NI6_TXCSR, val) -#define bfin_read_USB_EP_NI6_RXMAXP() bfin_read16(USB_EP_NI6_RXMAXP) -#define bfin_write_USB_EP_NI6_RXMAXP(val) bfin_write16(USB_EP_NI6_RXMAXP, val) -#define bfin_read_USB_EP_NI6_RXCSR() bfin_read16(USB_EP_NI6_RXCSR) -#define bfin_write_USB_EP_NI6_RXCSR(val) bfin_write16(USB_EP_NI6_RXCSR, val) -#define bfin_read_USB_EP_NI6_RXCOUNT() bfin_read16(USB_EP_NI6_RXCOUNT) -#define bfin_write_USB_EP_NI6_RXCOUNT(val) bfin_write16(USB_EP_NI6_RXCOUNT, val) -#define bfin_read_USB_EP_NI6_TXTYPE() bfin_read16(USB_EP_NI6_TXTYPE) -#define bfin_write_USB_EP_NI6_TXTYPE(val) bfin_write16(USB_EP_NI6_TXTYPE, val) -#define bfin_read_USB_EP_NI6_TXINTERVAL() bfin_read16(USB_EP_NI6_TXINTERVAL) -#define bfin_write_USB_EP_NI6_TXINTERVAL(val) bfin_write16(USB_EP_NI6_TXINTERVAL, val) -#define bfin_read_USB_EP_NI6_RXTYPE() bfin_read16(USB_EP_NI6_RXTYPE) -#define bfin_write_USB_EP_NI6_RXTYPE(val) bfin_write16(USB_EP_NI6_RXTYPE, val) -#define bfin_read_USB_EP_NI6_RXINTERVAL() bfin_read16(USB_EP_NI6_RXINTERVAL) -#define bfin_write_USB_EP_NI6_RXINTERVAL(val) bfin_write16(USB_EP_NI6_RXINTERVAL, val) -#define bfin_read_USB_EP_NI6_TXCOUNT() bfin_read16(USB_EP_NI6_TXCOUNT) -#define bfin_write_USB_EP_NI6_TXCOUNT(val) bfin_write16(USB_EP_NI6_TXCOUNT, val) - -/* USB Endpoint 7 Control Registers */ - -#define bfin_read_USB_EP_NI7_TXMAXP() bfin_read16(USB_EP_NI7_TXMAXP) -#define bfin_write_USB_EP_NI7_TXMAXP(val) bfin_write16(USB_EP_NI7_TXMAXP, val) -#define bfin_read_USB_EP_NI7_TXCSR() bfin_read16(USB_EP_NI7_TXCSR) -#define bfin_write_USB_EP_NI7_TXCSR(val) bfin_write16(USB_EP_NI7_TXCSR, val) -#define bfin_read_USB_EP_NI7_RXMAXP() bfin_read16(USB_EP_NI7_RXMAXP) -#define bfin_write_USB_EP_NI7_RXMAXP(val) bfin_write16(USB_EP_NI7_RXMAXP, val) -#define bfin_read_USB_EP_NI7_RXCSR() bfin_read16(USB_EP_NI7_RXCSR) -#define bfin_write_USB_EP_NI7_RXCSR(val) bfin_write16(USB_EP_NI7_RXCSR, val) -#define bfin_read_USB_EP_NI7_RXCOUNT() bfin_read16(USB_EP_NI7_RXCOUNT) -#define bfin_write_USB_EP_NI7_RXCOUNT(val) bfin_write16(USB_EP_NI7_RXCOUNT, val) -#define bfin_read_USB_EP_NI7_TXTYPE() bfin_read16(USB_EP_NI7_TXTYPE) -#define bfin_write_USB_EP_NI7_TXTYPE(val) bfin_write16(USB_EP_NI7_TXTYPE, val) -#define bfin_read_USB_EP_NI7_TXINTERVAL() bfin_read16(USB_EP_NI7_TXINTERVAL) -#define bfin_write_USB_EP_NI7_TXINTERVAL(val) bfin_write16(USB_EP_NI7_TXINTERVAL, val) -#define bfin_read_USB_EP_NI7_RXTYPE() bfin_read16(USB_EP_NI7_RXTYPE) -#define bfin_write_USB_EP_NI7_RXTYPE(val) bfin_write16(USB_EP_NI7_RXTYPE, val) -#define bfin_read_USB_EP_NI7_RXINTERVAL() bfin_read16(USB_EP_NI7_RXINTERVAL) -#define bfin_write_USB_EP_NI7_RXINTERVAL(val) bfin_write16(USB_EP_NI7_RXINTERVAL, val) -#define bfin_read_USB_EP_NI7_TXCOUNT() bfin_read16(USB_EP_NI7_TXCOUNT) -#define bfin_write_USB_EP_NI7_TXCOUNT(val) bfin_write16(USB_EP_NI7_TXCOUNT, val) - -#define bfin_read_USB_DMA_INTERRUPT() bfin_read16(USB_DMA_INTERRUPT) -#define bfin_write_USB_DMA_INTERRUPT(val) bfin_write16(USB_DMA_INTERRUPT, val) - -/* USB Channel 0 Config Registers */ - -#define bfin_read_USB_DMA0CONTROL() bfin_read16(USB_DMA0CONTROL) -#define bfin_write_USB_DMA0CONTROL(val) bfin_write16(USB_DMA0CONTROL, val) -#define bfin_read_USB_DMA0ADDRLOW() bfin_read16(USB_DMA0ADDRLOW) -#define bfin_write_USB_DMA0ADDRLOW(val) bfin_write16(USB_DMA0ADDRLOW, val) -#define bfin_read_USB_DMA0ADDRHIGH() bfin_read16(USB_DMA0ADDRHIGH) -#define bfin_write_USB_DMA0ADDRHIGH(val) bfin_write16(USB_DMA0ADDRHIGH, val) -#define bfin_read_USB_DMA0COUNTLOW() bfin_read16(USB_DMA0COUNTLOW) -#define bfin_write_USB_DMA0COUNTLOW(val) bfin_write16(USB_DMA0COUNTLOW, val) -#define bfin_read_USB_DMA0COUNTHIGH() bfin_read16(USB_DMA0COUNTHIGH) -#define bfin_write_USB_DMA0COUNTHIGH(val) bfin_write16(USB_DMA0COUNTHIGH, val) - -/* USB Channel 1 Config Registers */ - -#define bfin_read_USB_DMA1CONTROL() bfin_read16(USB_DMA1CONTROL) -#define bfin_write_USB_DMA1CONTROL(val) bfin_write16(USB_DMA1CONTROL, val) -#define bfin_read_USB_DMA1ADDRLOW() bfin_read16(USB_DMA1ADDRLOW) -#define bfin_write_USB_DMA1ADDRLOW(val) bfin_write16(USB_DMA1ADDRLOW, val) -#define bfin_read_USB_DMA1ADDRHIGH() bfin_read16(USB_DMA1ADDRHIGH) -#define bfin_write_USB_DMA1ADDRHIGH(val) bfin_write16(USB_DMA1ADDRHIGH, val) -#define bfin_read_USB_DMA1COUNTLOW() bfin_read16(USB_DMA1COUNTLOW) -#define bfin_write_USB_DMA1COUNTLOW(val) bfin_write16(USB_DMA1COUNTLOW, val) -#define bfin_read_USB_DMA1COUNTHIGH() bfin_read16(USB_DMA1COUNTHIGH) -#define bfin_write_USB_DMA1COUNTHIGH(val) bfin_write16(USB_DMA1COUNTHIGH, val) - -/* USB Channel 2 Config Registers */ - -#define bfin_read_USB_DMA2CONTROL() bfin_read16(USB_DMA2CONTROL) -#define bfin_write_USB_DMA2CONTROL(val) bfin_write16(USB_DMA2CONTROL, val) -#define bfin_read_USB_DMA2ADDRLOW() bfin_read16(USB_DMA2ADDRLOW) -#define bfin_write_USB_DMA2ADDRLOW(val) bfin_write16(USB_DMA2ADDRLOW, val) -#define bfin_read_USB_DMA2ADDRHIGH() bfin_read16(USB_DMA2ADDRHIGH) -#define bfin_write_USB_DMA2ADDRHIGH(val) bfin_write16(USB_DMA2ADDRHIGH, val) -#define bfin_read_USB_DMA2COUNTLOW() bfin_read16(USB_DMA2COUNTLOW) -#define bfin_write_USB_DMA2COUNTLOW(val) bfin_write16(USB_DMA2COUNTLOW, val) -#define bfin_read_USB_DMA2COUNTHIGH() bfin_read16(USB_DMA2COUNTHIGH) -#define bfin_write_USB_DMA2COUNTHIGH(val) bfin_write16(USB_DMA2COUNTHIGH, val) - -/* USB Channel 3 Config Registers */ - -#define bfin_read_USB_DMA3CONTROL() bfin_read16(USB_DMA3CONTROL) -#define bfin_write_USB_DMA3CONTROL(val) bfin_write16(USB_DMA3CONTROL, val) -#define bfin_read_USB_DMA3ADDRLOW() bfin_read16(USB_DMA3ADDRLOW) -#define bfin_write_USB_DMA3ADDRLOW(val) bfin_write16(USB_DMA3ADDRLOW, val) -#define bfin_read_USB_DMA3ADDRHIGH() bfin_read16(USB_DMA3ADDRHIGH) -#define bfin_write_USB_DMA3ADDRHIGH(val) bfin_write16(USB_DMA3ADDRHIGH, val) -#define bfin_read_USB_DMA3COUNTLOW() bfin_read16(USB_DMA3COUNTLOW) -#define bfin_write_USB_DMA3COUNTLOW(val) bfin_write16(USB_DMA3COUNTLOW, val) -#define bfin_read_USB_DMA3COUNTHIGH() bfin_read16(USB_DMA3COUNTHIGH) -#define bfin_write_USB_DMA3COUNTHIGH(val) bfin_write16(USB_DMA3COUNTHIGH, val) - -/* USB Channel 4 Config Registers */ - -#define bfin_read_USB_DMA4CONTROL() bfin_read16(USB_DMA4CONTROL) -#define bfin_write_USB_DMA4CONTROL(val) bfin_write16(USB_DMA4CONTROL, val) -#define bfin_read_USB_DMA4ADDRLOW() bfin_read16(USB_DMA4ADDRLOW) -#define bfin_write_USB_DMA4ADDRLOW(val) bfin_write16(USB_DMA4ADDRLOW, val) -#define bfin_read_USB_DMA4ADDRHIGH() bfin_read16(USB_DMA4ADDRHIGH) -#define bfin_write_USB_DMA4ADDRHIGH(val) bfin_write16(USB_DMA4ADDRHIGH, val) -#define bfin_read_USB_DMA4COUNTLOW() bfin_read16(USB_DMA4COUNTLOW) -#define bfin_write_USB_DMA4COUNTLOW(val) bfin_write16(USB_DMA4COUNTLOW, val) -#define bfin_read_USB_DMA4COUNTHIGH() bfin_read16(USB_DMA4COUNTHIGH) -#define bfin_write_USB_DMA4COUNTHIGH(val) bfin_write16(USB_DMA4COUNTHIGH, val) - -/* USB Channel 5 Config Registers */ - -#define bfin_read_USB_DMA5CONTROL() bfin_read16(USB_DMA5CONTROL) -#define bfin_write_USB_DMA5CONTROL(val) bfin_write16(USB_DMA5CONTROL, val) -#define bfin_read_USB_DMA5ADDRLOW() bfin_read16(USB_DMA5ADDRLOW) -#define bfin_write_USB_DMA5ADDRLOW(val) bfin_write16(USB_DMA5ADDRLOW, val) -#define bfin_read_USB_DMA5ADDRHIGH() bfin_read16(USB_DMA5ADDRHIGH) -#define bfin_write_USB_DMA5ADDRHIGH(val) bfin_write16(USB_DMA5ADDRHIGH, val) -#define bfin_read_USB_DMA5COUNTLOW() bfin_read16(USB_DMA5COUNTLOW) -#define bfin_write_USB_DMA5COUNTLOW(val) bfin_write16(USB_DMA5COUNTLOW, val) -#define bfin_read_USB_DMA5COUNTHIGH() bfin_read16(USB_DMA5COUNTHIGH) -#define bfin_write_USB_DMA5COUNTHIGH(val) bfin_write16(USB_DMA5COUNTHIGH, val) - -/* USB Channel 6 Config Registers */ - -#define bfin_read_USB_DMA6CONTROL() bfin_read16(USB_DMA6CONTROL) -#define bfin_write_USB_DMA6CONTROL(val) bfin_write16(USB_DMA6CONTROL, val) -#define bfin_read_USB_DMA6ADDRLOW() bfin_read16(USB_DMA6ADDRLOW) -#define bfin_write_USB_DMA6ADDRLOW(val) bfin_write16(USB_DMA6ADDRLOW, val) -#define bfin_read_USB_DMA6ADDRHIGH() bfin_read16(USB_DMA6ADDRHIGH) -#define bfin_write_USB_DMA6ADDRHIGH(val) bfin_write16(USB_DMA6ADDRHIGH, val) -#define bfin_read_USB_DMA6COUNTLOW() bfin_read16(USB_DMA6COUNTLOW) -#define bfin_write_USB_DMA6COUNTLOW(val) bfin_write16(USB_DMA6COUNTLOW, val) -#define bfin_read_USB_DMA6COUNTHIGH() bfin_read16(USB_DMA6COUNTHIGH) -#define bfin_write_USB_DMA6COUNTHIGH(val) bfin_write16(USB_DMA6COUNTHIGH, val) - -/* USB Channel 7 Config Registers */ - -#define bfin_read_USB_DMA7CONTROL() bfin_read16(USB_DMA7CONTROL) -#define bfin_write_USB_DMA7CONTROL(val) bfin_write16(USB_DMA7CONTROL, val) -#define bfin_read_USB_DMA7ADDRLOW() bfin_read16(USB_DMA7ADDRLOW) -#define bfin_write_USB_DMA7ADDRLOW(val) bfin_write16(USB_DMA7ADDRLOW, val) -#define bfin_read_USB_DMA7ADDRHIGH() bfin_read16(USB_DMA7ADDRHIGH) -#define bfin_write_USB_DMA7ADDRHIGH(val) bfin_write16(USB_DMA7ADDRHIGH, val) -#define bfin_read_USB_DMA7COUNTLOW() bfin_read16(USB_DMA7COUNTLOW) -#define bfin_write_USB_DMA7COUNTLOW(val) bfin_write16(USB_DMA7COUNTLOW, val) -#define bfin_read_USB_DMA7COUNTHIGH() bfin_read16(USB_DMA7COUNTHIGH) -#define bfin_write_USB_DMA7COUNTHIGH(val) bfin_write16(USB_DMA7COUNTHIGH, val) - #endif /* _CDEF_BF527_H */ diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h index 7014dde..12f2ad4 100644 --- a/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h +++ b/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h @@ -844,6 +844,7 @@ #define bfin_write_PPI_CONTROL(val) bfin_write16(PPI_CONTROL, val) #define bfin_read_PPI_STATUS() bfin_read16(PPI_STATUS) #define bfin_write_PPI_STATUS(val) bfin_write16(PPI_STATUS, val) +#define bfin_clear_PPI_STATUS() bfin_write_PPI_STATUS(0xFFFF) #define bfin_read_PPI_DELAY() bfin_read16(PPI_DELAY) #define bfin_write_PPI_DELAY(val) bfin_write16(PPI_DELAY, val) #define bfin_read_PPI_COUNT() bfin_read16(PPI_COUNT) @@ -1062,17 +1063,6 @@ #define bfin_read_CNT_MIN() bfin_read32(CNT_MIN) #define bfin_write_CNT_MIN(val) bfin_write32(CNT_MIN, val) -/* OTP/FUSE Registers */ - -#define bfin_read_OTP_CONTROL() bfin_read16(OTP_CONTROL) -#define bfin_write_OTP_CONTROL(val) bfin_write16(OTP_CONTROL, val) -#define bfin_read_OTP_BEN() bfin_read16(OTP_BEN) -#define bfin_write_OTP_BEN(val) bfin_write16(OTP_BEN, val) -#define bfin_read_OTP_STATUS() bfin_read16(OTP_STATUS) -#define bfin_write_OTP_STATUS(val) bfin_write16(OTP_STATUS, val) -#define bfin_read_OTP_TIMING() bfin_read32(OTP_TIMING) -#define bfin_write_OTP_TIMING(val) bfin_write32(OTP_TIMING, val) - /* Security Registers */ #define bfin_read_SECURE_SYSSWT() bfin_read32(SECURE_SYSSWT) @@ -1082,17 +1072,6 @@ #define bfin_read_SECURE_STATUS() bfin_read16(SECURE_STATUS) #define bfin_write_SECURE_STATUS(val) bfin_write16(SECURE_STATUS, val) -/* OTP Read/Write Data Buffer Registers */ - -#define bfin_read_OTP_DATA0() bfin_read32(OTP_DATA0) -#define bfin_write_OTP_DATA0(val) bfin_write32(OTP_DATA0, val) -#define bfin_read_OTP_DATA1() bfin_read32(OTP_DATA1) -#define bfin_write_OTP_DATA1(val) bfin_write32(OTP_DATA1, val) -#define bfin_read_OTP_DATA2() bfin_read32(OTP_DATA2) -#define bfin_write_OTP_DATA2(val) bfin_write32(OTP_DATA2, val) -#define bfin_read_OTP_DATA3() bfin_read32(OTP_DATA3) -#define bfin_write_OTP_DATA3(val) bfin_write32(OTP_DATA3, val) - /* NFC Registers */ #define bfin_read_NFC_CTL() bfin_read16(NFC_CTL) diff --git a/arch/blackfin/mach-bf527/include/mach/defBF525.h b/arch/blackfin/mach-bf527/include/mach/defBF525.h index 82abefc..c136f70 100644 --- a/arch/blackfin/mach-bf527/include/mach/defBF525.h +++ b/arch/blackfin/mach-bf527/include/mach/defBF525.h @@ -7,15 +7,8 @@ #ifndef _DEF_BF525_H #define _DEF_BF525_H -/* Include all Core registers and bit definitions */ -#include <asm/def_LPBlackfin.h> - -/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF525 */ - -/* Include defBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */ -#include "defBF52x_base.h" - -/* The following are the #defines needed by ADSP-BF525 that are not in the common header */ +/* BF525 is BF522 + USB */ +#include "defBF522.h" /* USB Control Registers */ diff --git a/arch/blackfin/mach-bf527/include/mach/defBF527.h b/arch/blackfin/mach-bf527/include/mach/defBF527.h index 570a125..4dd58fb 100644 --- a/arch/blackfin/mach-bf527/include/mach/defBF527.h +++ b/arch/blackfin/mach-bf527/include/mach/defBF527.h @@ -7,15 +7,9 @@ #ifndef _DEF_BF527_H #define _DEF_BF527_H -/* Include all Core registers and bit definitions */ -#include <asm/def_LPBlackfin.h> +/* BF527 is BF525 + EMAC */ +#include "defBF525.h" -/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF527 */ - -/* Include defBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */ -#include "defBF52x_base.h" - -/* The following are the #defines needed by ADSP-BF527 that are not in the common header */ /* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */ #define EMAC_OPMODE 0xFFC03000 /* Operating Mode Register */ @@ -394,673 +388,4 @@ #define TX_GE1024_CNT 0x00200000 /* 1024-Max-Byte TX Frames Sent */ #define TX_ABORT_CNT 0x00400000 /* TX Frames Aborted */ -/* USB Control Registers */ - -#define USB_FADDR 0xffc03800 /* Function address register */ -#define USB_POWER 0xffc03804 /* Power management register */ -#define USB_INTRTX 0xffc03808 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */ -#define USB_INTRRX 0xffc0380c /* Interrupt register for Rx endpoints 1 to 7 */ -#define USB_INTRTXE 0xffc03810 /* Interrupt enable register for IntrTx */ -#define USB_INTRRXE 0xffc03814 /* Interrupt enable register for IntrRx */ -#define USB_INTRUSB 0xffc03818 /* Interrupt register for common USB interrupts */ -#define USB_INTRUSBE 0xffc0381c /* Interrupt enable register for IntrUSB */ -#define USB_FRAME 0xffc03820 /* USB frame number */ -#define USB_INDEX 0xffc03824 /* Index register for selecting the indexed endpoint registers */ -#define USB_TESTMODE 0xffc03828 /* Enabled USB 20 test modes */ -#define USB_GLOBINTR 0xffc0382c /* Global Interrupt Mask register and Wakeup Exception Interrupt */ -#define USB_GLOBAL_CTL 0xffc03830 /* Global Clock Control for the core */ - -/* USB Packet Control Registers */ - -#define USB_TX_MAX_PACKET 0xffc03840 /* Maximum packet size for Host Tx endpoint */ -#define USB_CSR0 0xffc03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ -#define USB_TXCSR 0xffc03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ -#define USB_RX_MAX_PACKET 0xffc03848 /* Maximum packet size for Host Rx endpoint */ -#define USB_RXCSR 0xffc0384c /* Control Status register for Host Rx endpoint */ -#define USB_COUNT0 0xffc03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ -#define USB_RXCOUNT 0xffc03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ -#define USB_TXTYPE 0xffc03854 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */ -#define USB_NAKLIMIT0 0xffc03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ -#define USB_TXINTERVAL 0xffc03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ -#define USB_RXTYPE 0xffc0385c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */ -#define USB_RXINTERVAL 0xffc03860 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */ -#define USB_TXCOUNT 0xffc03868 /* Number of bytes to be written to the selected endpoint Tx FIFO */ - -/* USB Endpoint FIFO Registers */ - -#define USB_EP0_FIFO 0xffc03880 /* Endpoint 0 FIFO */ -#define USB_EP1_FIFO 0xffc03888 /* Endpoint 1 FIFO */ -#define USB_EP2_FIFO 0xffc03890 /* Endpoint 2 FIFO */ -#define USB_EP3_FIFO 0xffc03898 /* Endpoint 3 FIFO */ -#define USB_EP4_FIFO 0xffc038a0 /* Endpoint 4 FIFO */ -#define USB_EP5_FIFO 0xffc038a8 /* Endpoint 5 FIFO */ -#define USB_EP6_FIFO 0xffc038b0 /* Endpoint 6 FIFO */ -#define USB_EP7_FIFO 0xffc038b8 /* Endpoint 7 FIFO */ - -/* USB OTG Control Registers */ - -#define USB_OTG_DEV_CTL 0xffc03900 /* OTG Device Control Register */ -#define USB_OTG_VBUS_IRQ 0xffc03904 /* OTG VBUS Control Interrupts */ -#define USB_OTG_VBUS_MASK 0xffc03908 /* VBUS Control Interrupt Enable */ - -/* USB Phy Control Registers */ - -#define USB_LINKINFO 0xffc03948 /* Enables programming of some PHY-side delays */ -#define USB_VPLEN 0xffc0394c /* Determines duration of VBUS pulse for VBUS charging */ -#define USB_HS_EOF1 0xffc03950 /* Time buffer for High-Speed transactions */ -#define USB_FS_EOF1 0xffc03954 /* Time buffer for Full-Speed transactions */ -#define USB_LS_EOF1 0xffc03958 /* Time buffer for Low-Speed transactions */ - -/* (APHY_CNTRL is for ADI usage only) */ - -#define USB_APHY_CNTRL 0xffc039e0 /* Register that increases visibility of Analog PHY */ - -/* (APHY_CALIB is for ADI usage only) */ - -#define USB_APHY_CALIB 0xffc039e4 /* Register used to set some calibration values */ - -#define USB_APHY_CNTRL2 0xffc039e8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */ - -/* (PHY_TEST is for ADI usage only) */ - -#define USB_PHY_TEST 0xffc039ec /* Used for reducing simulation time and simplifies FIFO testability */ - -#define USB_PLLOSC_CTRL 0xffc039f0 /* Used to program different parameters for USB PLL and Oscillator */ -#define USB_SRP_CLKDIV 0xffc039f4 /* Used to program clock divide value for the clock fed to the SRP detection logic */ - -/* USB Endpoint 0 Control Registers */ - -#define USB_EP_NI0_TXMAXP 0xffc03a00 /* Maximum packet size for Host Tx endpoint0 */ -#define USB_EP_NI0_TXCSR 0xffc03a04 /* Control Status register for endpoint 0 */ -#define USB_EP_NI0_RXMAXP 0xffc03a08 /* Maximum packet size for Host Rx endpoint0 */ -#define USB_EP_NI0_RXCSR 0xffc03a0c /* Control Status register for Host Rx endpoint0 */ -#define USB_EP_NI0_RXCOUNT 0xffc03a10 /* Number of bytes received in endpoint 0 FIFO */ -#define USB_EP_NI0_TXTYPE 0xffc03a14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */ -#define USB_EP_NI0_TXINTERVAL 0xffc03a18 /* Sets the NAK response timeout on Endpoint 0 */ -#define USB_EP_NI0_RXTYPE 0xffc03a1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */ -#define USB_EP_NI0_RXINTERVAL 0xffc03a20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */ -#define USB_EP_NI0_TXCOUNT 0xffc03a28 /* Number of bytes to be written to the endpoint0 Tx FIFO */ - -/* USB Endpoint 1 Control Registers */ - -#define USB_EP_NI1_TXMAXP 0xffc03a40 /* Maximum packet size for Host Tx endpoint1 */ -#define USB_EP_NI1_TXCSR 0xffc03a44 /* Control Status register for endpoint1 */ -#define USB_EP_NI1_RXMAXP 0xffc03a48 /* Maximum packet size for Host Rx endpoint1 */ -#define USB_EP_NI1_RXCSR 0xffc03a4c /* Control Status register for Host Rx endpoint1 */ -#define USB_EP_NI1_RXCOUNT 0xffc03a50 /* Number of bytes received in endpoint1 FIFO */ -#define USB_EP_NI1_TXTYPE 0xffc03a54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */ -#define USB_EP_NI1_TXINTERVAL 0xffc03a58 /* Sets the NAK response timeout on Endpoint1 */ -#define USB_EP_NI1_RXTYPE 0xffc03a5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */ -#define USB_EP_NI1_RXINTERVAL 0xffc03a60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */ -#define USB_EP_NI1_TXCOUNT 0xffc03a68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */ - -/* USB Endpoint 2 Control Registers */ - -#define USB_EP_NI2_TXMAXP 0xffc03a80 /* Maximum packet size for Host Tx endpoint2 */ -#define USB_EP_NI2_TXCSR 0xffc03a84 /* Control Status register for endpoint2 */ -#define USB_EP_NI2_RXMAXP 0xffc03a88 /* Maximum packet size for Host Rx endpoint2 */ -#define USB_EP_NI2_RXCSR 0xffc03a8c /* Control Status register for Host Rx endpoint2 */ -#define USB_EP_NI2_RXCOUNT 0xffc03a90 /* Number of bytes received in endpoint2 FIFO */ -#define USB_EP_NI2_TXTYPE 0xffc03a94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */ -#define USB_EP_NI2_TXINTERVAL 0xffc03a98 /* Sets the NAK response timeout on Endpoint2 */ -#define USB_EP_NI2_RXTYPE 0xffc03a9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */ -#define USB_EP_NI2_RXINTERVAL 0xffc03aa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */ -#define USB_EP_NI2_TXCOUNT 0xffc03aa8 /* Number of bytes to be written to the endpoint2 Tx FIFO */ - -/* USB Endpoint 3 Control Registers */ - -#define USB_EP_NI3_TXMAXP 0xffc03ac0 /* Maximum packet size for Host Tx endpoint3 */ -#define USB_EP_NI3_TXCSR 0xffc03ac4 /* Control Status register for endpoint3 */ -#define USB_EP_NI3_RXMAXP 0xffc03ac8 /* Maximum packet size for Host Rx endpoint3 */ -#define USB_EP_NI3_RXCSR 0xffc03acc /* Control Status register for Host Rx endpoint3 */ -#define USB_EP_NI3_RXCOUNT 0xffc03ad0 /* Number of bytes received in endpoint3 FIFO */ -#define USB_EP_NI3_TXTYPE 0xffc03ad4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */ -#define USB_EP_NI3_TXINTERVAL 0xffc03ad8 /* Sets the NAK response timeout on Endpoint3 */ -#define USB_EP_NI3_RXTYPE 0xffc03adc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */ -#define USB_EP_NI3_RXINTERVAL 0xffc03ae0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */ -#define USB_EP_NI3_TXCOUNT 0xffc03ae8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */ - -/* USB Endpoint 4 Control Registers */ - -#define USB_EP_NI4_TXMAXP 0xffc03b00 /* Maximum packet size for Host Tx endpoint4 */ -#define USB_EP_NI4_TXCSR 0xffc03b04 /* Control Status register for endpoint4 */ -#define USB_EP_NI4_RXMAXP 0xffc03b08 /* Maximum packet size for Host Rx endpoint4 */ -#define USB_EP_NI4_RXCSR 0xffc03b0c /* Control Status register for Host Rx endpoint4 */ -#define USB_EP_NI4_RXCOUNT 0xffc03b10 /* Number of bytes received in endpoint4 FIFO */ -#define USB_EP_NI4_TXTYPE 0xffc03b14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */ -#define USB_EP_NI4_TXINTERVAL 0xffc03b18 /* Sets the NAK response timeout on Endpoint4 */ -#define USB_EP_NI4_RXTYPE 0xffc03b1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */ -#define USB_EP_NI4_RXINTERVAL 0xffc03b20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */ -#define USB_EP_NI4_TXCOUNT 0xffc03b28 /* Number of bytes to be written to the endpoint4 Tx FIFO */ - -/* USB Endpoint 5 Control Registers */ - -#define USB_EP_NI5_TXMAXP 0xffc03b40 /* Maximum packet size for Host Tx endpoint5 */ -#define USB_EP_NI5_TXCSR 0xffc03b44 /* Control Status register for endpoint5 */ -#define USB_EP_NI5_RXMAXP 0xffc03b48 /* Maximum packet size for Host Rx endpoint5 */ -#define USB_EP_NI5_RXCSR 0xffc03b4c /* Control Status register for Host Rx endpoint5 */ -#define USB_EP_NI5_RXCOUNT 0xffc03b50 /* Number of bytes received in endpoint5 FIFO */ -#define USB_EP_NI5_TXTYPE 0xffc03b54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */ -#define USB_EP_NI5_TXINTERVAL 0xffc03b58 /* Sets the NAK response timeout on Endpoint5 */ -#define USB_EP_NI5_RXTYPE 0xffc03b5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */ -#define USB_EP_NI5_RXINTERVAL 0xffc03b60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */ -#define USB_EP_NI5_TXCOUNT 0xffc03b68 /* Number of bytes to be written to the endpoint5 Tx FIFO */ - -/* USB Endpoint 6 Control Registers */ - -#define USB_EP_NI6_TXMAXP 0xffc03b80 /* Maximum packet size for Host Tx endpoint6 */ -#define USB_EP_NI6_TXCSR 0xffc03b84 /* Control Status register for endpoint6 */ -#define USB_EP_NI6_RXMAXP 0xffc03b88 /* Maximum packet size for Host Rx endpoint6 */ -#define USB_EP_NI6_RXCSR 0xffc03b8c /* Control Status register for Host Rx endpoint6 */ -#define USB_EP_NI6_RXCOUNT 0xffc03b90 /* Number of bytes received in endpoint6 FIFO */ -#define USB_EP_NI6_TXTYPE 0xffc03b94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */ -#define USB_EP_NI6_TXINTERVAL 0xffc03b98 /* Sets the NAK response timeout on Endpoint6 */ -#define USB_EP_NI6_RXTYPE 0xffc03b9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */ -#define USB_EP_NI6_RXINTERVAL 0xffc03ba0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */ -#define USB_EP_NI6_TXCOUNT 0xffc03ba8 /* Number of bytes to be written to the endpoint6 Tx FIFO */ - -/* USB Endpoint 7 Control Registers */ - -#define USB_EP_NI7_TXMAXP 0xffc03bc0 /* Maximum packet size for Host Tx endpoint7 */ -#define USB_EP_NI7_TXCSR 0xffc03bc4 /* Control Status register for endpoint7 */ -#define USB_EP_NI7_RXMAXP 0xffc03bc8 /* Maximum packet size for Host Rx endpoint7 */ -#define USB_EP_NI7_RXCSR 0xffc03bcc /* Control Status register for Host Rx endpoint7 */ -#define USB_EP_NI7_RXCOUNT 0xffc03bd0 /* Number of bytes received in endpoint7 FIFO */ -#define USB_EP_NI7_TXTYPE 0xffc03bd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */ -#define USB_EP_NI7_TXINTERVAL 0xffc03bd8 /* Sets the NAK response timeout on Endpoint7 */ -#define USB_EP_NI7_RXTYPE 0xffc03bdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */ -#define USB_EP_NI7_RXINTERVAL 0xffc03bf0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */ -#define USB_EP_NI7_TXCOUNT 0xffc03bf8 /* Number of bytes to be written to the endpoint7 Tx FIFO */ - -#define USB_DMA_INTERRUPT 0xffc03c00 /* Indicates pending interrupts for the DMA channels */ - -/* USB Channel 0 Config Registers */ - -#define USB_DMA0CONTROL 0xffc03c04 /* DMA master channel 0 configuration */ -#define USB_DMA0ADDRLOW 0xffc03c08 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */ -#define USB_DMA0ADDRHIGH 0xffc03c0c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */ -#define USB_DMA0COUNTLOW 0xffc03c10 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */ -#define USB_DMA0COUNTHIGH 0xffc03c14 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */ - -/* USB Channel 1 Config Registers */ - -#define USB_DMA1CONTROL 0xffc03c24 /* DMA master channel 1 configuration */ -#define USB_DMA1ADDRLOW 0xffc03c28 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */ -#define USB_DMA1ADDRHIGH 0xffc03c2c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */ -#define USB_DMA1COUNTLOW 0xffc03c30 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */ -#define USB_DMA1COUNTHIGH 0xffc03c34 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */ - -/* USB Channel 2 Config Registers */ - -#define USB_DMA2CONTROL 0xffc03c44 /* DMA master channel 2 configuration */ -#define USB_DMA2ADDRLOW 0xffc03c48 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */ -#define USB_DMA2ADDRHIGH 0xffc03c4c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */ -#define USB_DMA2COUNTLOW 0xffc03c50 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */ -#define USB_DMA2COUNTHIGH 0xffc03c54 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */ - -/* USB Channel 3 Config Registers */ - -#define USB_DMA3CONTROL 0xffc03c64 /* DMA master channel 3 configuration */ -#define USB_DMA3ADDRLOW 0xffc03c68 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */ -#define USB_DMA3ADDRHIGH 0xffc03c6c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */ -#define USB_DMA3COUNTLOW 0xffc03c70 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */ -#define USB_DMA3COUNTHIGH 0xffc03c74 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */ - -/* USB Channel 4 Config Registers */ - -#define USB_DMA4CONTROL 0xffc03c84 /* DMA master channel 4 configuration */ -#define USB_DMA4ADDRLOW 0xffc03c88 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */ -#define USB_DMA4ADDRHIGH 0xffc03c8c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */ -#define USB_DMA4COUNTLOW 0xffc03c90 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */ -#define USB_DMA4COUNTHIGH 0xffc03c94 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */ - -/* USB Channel 5 Config Registers */ - -#define USB_DMA5CONTROL 0xffc03ca4 /* DMA master channel 5 configuration */ -#define USB_DMA5ADDRLOW 0xffc03ca8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */ -#define USB_DMA5ADDRHIGH 0xffc03cac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */ -#define USB_DMA5COUNTLOW 0xffc03cb0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */ -#define USB_DMA5COUNTHIGH 0xffc03cb4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */ - -/* USB Channel 6 Config Registers */ - -#define USB_DMA6CONTROL 0xffc03cc4 /* DMA master channel 6 configuration */ -#define USB_DMA6ADDRLOW 0xffc03cc8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */ -#define USB_DMA6ADDRHIGH 0xffc03ccc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */ -#define USB_DMA6COUNTLOW 0xffc03cd0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */ -#define USB_DMA6COUNTHIGH 0xffc03cd4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */ - -/* USB Channel 7 Config Registers */ - -#define USB_DMA7CONTROL 0xffc03ce4 /* DMA master channel 7 configuration */ -#define USB_DMA7ADDRLOW 0xffc03ce8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */ -#define USB_DMA7ADDRHIGH 0xffc03cec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */ -#define USB_DMA7COUNTLOW 0xffc03cf0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */ -#define USB_DMA7COUNTHIGH 0xffc03cf4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */ - -/* Bit masks for USB_FADDR */ - -#define FUNCTION_ADDRESS 0x7f /* Function address */ - -/* Bit masks for USB_POWER */ - -#define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */ -#define nENABLE_SUSPENDM 0x0 -#define SUSPEND_MODE 0x2 /* Suspend Mode indicator */ -#define nSUSPEND_MODE 0x0 -#define RESUME_MODE 0x4 /* DMA Mode */ -#define nRESUME_MODE 0x0 -#define RESET 0x8 /* Reset indicator */ -#define nRESET 0x0 -#define HS_MODE 0x10 /* High Speed mode indicator */ -#define nHS_MODE 0x0 -#define HS_ENABLE 0x20 /* high Speed Enable */ -#define nHS_ENABLE 0x0 -#define SOFT_CONN 0x40 /* Soft connect */ -#define nSOFT_CONN 0x0 -#define ISO_UPDATE 0x80 /* Isochronous update */ -#define nISO_UPDATE 0x0 - -/* Bit masks for USB_INTRTX */ - -#define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */ -#define nEP0_TX 0x0 -#define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */ -#define nEP1_TX 0x0 -#define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */ -#define nEP2_TX 0x0 -#define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */ -#define nEP3_TX 0x0 -#define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */ -#define nEP4_TX 0x0 -#define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */ -#define nEP5_TX 0x0 -#define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */ -#define nEP6_TX 0x0 -#define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */ -#define nEP7_TX 0x0 - -/* Bit masks for USB_INTRRX */ - -#define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */ -#define nEP1_RX 0x0 -#define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */ -#define nEP2_RX 0x0 -#define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */ -#define nEP3_RX 0x0 -#define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */ -#define nEP4_RX 0x0 -#define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */ -#define nEP5_RX 0x0 -#define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */ -#define nEP6_RX 0x0 -#define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */ -#define nEP7_RX 0x0 - -/* Bit masks for USB_INTRTXE */ - -#define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */ -#define nEP0_TX_E 0x0 -#define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */ -#define nEP1_TX_E 0x0 -#define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */ -#define nEP2_TX_E 0x0 -#define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */ -#define nEP3_TX_E 0x0 -#define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */ -#define nEP4_TX_E 0x0 -#define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */ -#define nEP5_TX_E 0x0 -#define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */ -#define nEP6_TX_E 0x0 -#define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */ -#define nEP7_TX_E 0x0 - -/* Bit masks for USB_INTRRXE */ - -#define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */ -#define nEP1_RX_E 0x0 -#define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */ -#define nEP2_RX_E 0x0 -#define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */ -#define nEP3_RX_E 0x0 -#define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */ -#define nEP4_RX_E 0x0 -#define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */ -#define nEP5_RX_E 0x0 -#define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */ -#define nEP6_RX_E 0x0 -#define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */ -#define nEP7_RX_E 0x0 - -/* Bit masks for USB_INTRUSB */ - -#define SUSPEND_B 0x1 /* Suspend indicator */ -#define nSUSPEND_B 0x0 -#define RESUME_B 0x2 /* Resume indicator */ -#define nRESUME_B 0x0 -#define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */ -#define nRESET_OR_BABLE_B 0x0 -#define SOF_B 0x8 /* Start of frame */ -#define nSOF_B 0x0 -#define CONN_B 0x10 /* Connection indicator */ -#define nCONN_B 0x0 -#define DISCON_B 0x20 /* Disconnect indicator */ -#define nDISCON_B 0x0 -#define SESSION_REQ_B 0x40 /* Session Request */ -#define nSESSION_REQ_B 0x0 -#define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */ -#define nVBUS_ERROR_B 0x0 - -/* Bit masks for USB_INTRUSBE */ - -#define SUSPEND_BE 0x1 /* Suspend indicator int enable */ -#define nSUSPEND_BE 0x0 -#define RESUME_BE 0x2 /* Resume indicator int enable */ -#define nRESUME_BE 0x0 -#define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */ -#define nRESET_OR_BABLE_BE 0x0 -#define SOF_BE 0x8 /* Start of frame int enable */ -#define nSOF_BE 0x0 -#define CONN_BE 0x10 /* Connection indicator int enable */ -#define nCONN_BE 0x0 -#define DISCON_BE 0x20 /* Disconnect indicator int enable */ -#define nDISCON_BE 0x0 -#define SESSION_REQ_BE 0x40 /* Session Request int enable */ -#define nSESSION_REQ_BE 0x0 -#define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */ -#define nVBUS_ERROR_BE 0x0 - -/* Bit masks for USB_FRAME */ - -#define FRAME_NUMBER 0x7ff /* Frame number */ - -/* Bit masks for USB_INDEX */ - -#define SELECTED_ENDPOINT 0xf /* selected endpoint */ - -/* Bit masks for USB_GLOBAL_CTL */ - -#define GLOBAL_ENA 0x1 /* enables USB module */ -#define nGLOBAL_ENA 0x0 -#define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */ -#define nEP1_TX_ENA 0x0 -#define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */ -#define nEP2_TX_ENA 0x0 -#define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */ -#define nEP3_TX_ENA 0x0 -#define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */ -#define nEP4_TX_ENA 0x0 -#define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */ -#define nEP5_TX_ENA 0x0 -#define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */ -#define nEP6_TX_ENA 0x0 -#define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */ -#define nEP7_TX_ENA 0x0 -#define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */ -#define nEP1_RX_ENA 0x0 -#define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */ -#define nEP2_RX_ENA 0x0 -#define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */ -#define nEP3_RX_ENA 0x0 -#define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */ -#define nEP4_RX_ENA 0x0 -#define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */ -#define nEP5_RX_ENA 0x0 -#define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */ -#define nEP6_RX_ENA 0x0 -#define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */ -#define nEP7_RX_ENA 0x0 - -/* Bit masks for USB_OTG_DEV_CTL */ - -#define SESSION 0x1 /* session indicator */ -#define nSESSION 0x0 -#define HOST_REQ 0x2 /* Host negotiation request */ -#define nHOST_REQ 0x0 -#define HOST_MODE 0x4 /* indicates USBDRC is a host */ -#define nHOST_MODE 0x0 -#define VBUS0 0x8 /* Vbus level indicator[0] */ -#define nVBUS0 0x0 -#define VBUS1 0x10 /* Vbus level indicator[1] */ -#define nVBUS1 0x0 -#define LSDEV 0x20 /* Low-speed indicator */ -#define nLSDEV 0x0 -#define FSDEV 0x40 /* Full or High-speed indicator */ -#define nFSDEV 0x0 -#define B_DEVICE 0x80 /* A' or 'B' device indicator */ -#define nB_DEVICE 0x0 - -/* Bit masks for USB_OTG_VBUS_IRQ */ - -#define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */ -#define nDRIVE_VBUS_ON 0x0 -#define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */ -#define nDRIVE_VBUS_OFF 0x0 -#define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */ -#define nCHRG_VBUS_START 0x0 -#define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */ -#define nCHRG_VBUS_END 0x0 -#define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */ -#define nDISCHRG_VBUS_START 0x0 -#define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */ -#define nDISCHRG_VBUS_END 0x0 - -/* Bit masks for USB_OTG_VBUS_MASK */ - -#define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */ -#define nDRIVE_VBUS_ON_ENA 0x0 -#define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */ -#define nDRIVE_VBUS_OFF_ENA 0x0 -#define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */ -#define nCHRG_VBUS_START_ENA 0x0 -#define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */ -#define nCHRG_VBUS_END_ENA 0x0 -#define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */ -#define nDISCHRG_VBUS_START_ENA 0x0 -#define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */ -#define nDISCHRG_VBUS_END_ENA 0x0 - -/* Bit masks for USB_CSR0 */ - -#define RXPKTRDY 0x1 /* data packet receive indicator */ -#define nRXPKTRDY 0x0 -#define TXPKTRDY 0x2 /* data packet in FIFO indicator */ -#define nTXPKTRDY 0x0 -#define STALL_SENT 0x4 /* STALL handshake sent */ -#define nSTALL_SENT 0x0 -#define DATAEND 0x8 /* Data end indicator */ -#define nDATAEND 0x0 -#define SETUPEND 0x10 /* Setup end */ -#define nSETUPEND 0x0 -#define SENDSTALL 0x20 /* Send STALL handshake */ -#define nSENDSTALL 0x0 -#define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */ -#define nSERVICED_RXPKTRDY 0x0 -#define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */ -#define nSERVICED_SETUPEND 0x0 -#define FLUSHFIFO 0x100 /* flush endpoint FIFO */ -#define nFLUSHFIFO 0x0 -#define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */ -#define nSTALL_RECEIVED_H 0x0 -#define SETUPPKT_H 0x8 /* send Setup token host mode */ -#define nSETUPPKT_H 0x0 -#define ERROR_H 0x10 /* timeout error indicator host mode */ -#define nERROR_H 0x0 -#define REQPKT_H 0x20 /* Request an IN transaction host mode */ -#define nREQPKT_H 0x0 -#define STATUSPKT_H 0x40 /* Status stage transaction host mode */ -#define nSTATUSPKT_H 0x0 -#define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */ -#define nNAK_TIMEOUT_H 0x0 - -/* Bit masks for USB_COUNT0 */ - -#define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */ - -/* Bit masks for USB_NAKLIMIT0 */ - -#define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */ - -/* Bit masks for USB_TX_MAX_PACKET */ - -#define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */ - -/* Bit masks for USB_RX_MAX_PACKET */ - -#define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */ - -/* Bit masks for USB_TXCSR */ - -#define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */ -#define nTXPKTRDY_T 0x0 -#define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */ -#define nFIFO_NOT_EMPTY_T 0x0 -#define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */ -#define nUNDERRUN_T 0x0 -#define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */ -#define nFLUSHFIFO_T 0x0 -#define STALL_SEND_T 0x10 /* issue a Stall handshake */ -#define nSTALL_SEND_T 0x0 -#define STALL_SENT_T 0x20 /* Stall handshake transmitted */ -#define nSTALL_SENT_T 0x0 -#define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */ -#define nCLEAR_DATATOGGLE_T 0x0 -#define INCOMPTX_T 0x80 /* indicates that a large packet is split */ -#define nINCOMPTX_T 0x0 -#define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */ -#define nDMAREQMODE_T 0x0 -#define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */ -#define nFORCE_DATATOGGLE_T 0x0 -#define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */ -#define nDMAREQ_ENA_T 0x0 -#define ISO_T 0x4000 /* enable Isochronous transfers */ -#define nISO_T 0x0 -#define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */ -#define nAUTOSET_T 0x0 -#define ERROR_TH 0x4 /* error condition host mode */ -#define nERROR_TH 0x0 -#define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */ -#define nSTALL_RECEIVED_TH 0x0 -#define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */ -#define nNAK_TIMEOUT_TH 0x0 - -/* Bit masks for USB_TXCOUNT */ - -#define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */ - -/* Bit masks for USB_RXCSR */ - -#define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */ -#define nRXPKTRDY_R 0x0 -#define FIFO_FULL_R 0x2 /* FIFO not empty */ -#define nFIFO_FULL_R 0x0 -#define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */ -#define nOVERRUN_R 0x0 -#define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */ -#define nDATAERROR_R 0x0 -#define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */ -#define nFLUSHFIFO_R 0x0 -#define STALL_SEND_R 0x20 /* issue a Stall handshake */ -#define nSTALL_SEND_R 0x0 -#define STALL_SENT_R 0x40 /* Stall handshake transmitted */ -#define nSTALL_SENT_R 0x0 -#define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */ -#define nCLEAR_DATATOGGLE_R 0x0 -#define INCOMPRX_R 0x100 /* indicates that a large packet is split */ -#define nINCOMPRX_R 0x0 -#define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */ -#define nDMAREQMODE_R 0x0 -#define DISNYET_R 0x1000 /* disable Nyet handshakes */ -#define nDISNYET_R 0x0 -#define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */ -#define nDMAREQ_ENA_R 0x0 -#define ISO_R 0x4000 /* enable Isochronous transfers */ -#define nISO_R 0x0 -#define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */ -#define nAUTOCLEAR_R 0x0 -#define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */ -#define nERROR_RH 0x0 -#define REQPKT_RH 0x20 /* request an IN transaction host mode */ -#define nREQPKT_RH 0x0 -#define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */ -#define nSTALL_RECEIVED_RH 0x0 -#define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */ -#define nINCOMPRX_RH 0x0 -#define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */ -#define nDMAREQMODE_RH 0x0 -#define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */ -#define nAUTOREQ_RH 0x0 - -/* Bit masks for USB_RXCOUNT */ - -#define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */ - -/* Bit masks for USB_TXTYPE */ - -#define TARGET_EP_NO_T 0xf /* EP number */ -#define PROTOCOL_T 0xc /* transfer type */ - -/* Bit masks for USB_TXINTERVAL */ - -#define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */ - -/* Bit masks for USB_RXTYPE */ - -#define TARGET_EP_NO_R 0xf /* EP number */ -#define PROTOCOL_R 0xc /* transfer type */ - -/* Bit masks for USB_RXINTERVAL */ - -#define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */ - -/* Bit masks for USB_DMA_INTERRUPT */ - -#define DMA0_INT 0x1 /* DMA0 pending interrupt */ -#define nDMA0_INT 0x0 -#define DMA1_INT 0x2 /* DMA1 pending interrupt */ -#define nDMA1_INT 0x0 -#define DMA2_INT 0x4 /* DMA2 pending interrupt */ -#define nDMA2_INT 0x0 -#define DMA3_INT 0x8 /* DMA3 pending interrupt */ -#define nDMA3_INT 0x0 -#define DMA4_INT 0x10 /* DMA4 pending interrupt */ -#define nDMA4_INT 0x0 -#define DMA5_INT 0x20 /* DMA5 pending interrupt */ -#define nDMA5_INT 0x0 -#define DMA6_INT 0x40 /* DMA6 pending interrupt */ -#define nDMA6_INT 0x0 -#define DMA7_INT 0x80 /* DMA7 pending interrupt */ -#define nDMA7_INT 0x0 - -/* Bit masks for USB_DMAxCONTROL */ - -#define DMA_ENA 0x1 /* DMA enable */ -#define nDMA_ENA 0x0 -#define DIRECTION 0x2 /* direction of DMA transfer */ -#define nDIRECTION 0x0 -#define MODE 0x4 /* DMA Bus error */ -#define nMODE 0x0 -#define INT_ENA 0x8 /* Interrupt enable */ -#define nINT_ENA 0x0 -#define EPNUM 0xf0 /* EP number */ -#define BUSERROR 0x100 /* DMA Bus error */ -#define nBUSERROR 0x0 - -/* Bit masks for USB_DMAxADDRHIGH */ - -#define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */ - -/* Bit masks for USB_DMAxADDRLOW */ - -#define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */ - -/* Bit masks for USB_DMAxCOUNTHIGH */ - -#define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */ - -/* Bit masks for USB_DMAxCOUNTLOW */ - -#define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */ - #endif /* _DEF_BF527_H */ diff --git a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h index b9dbb73..8b18b53 100644 --- a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h +++ b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h @@ -586,58 +586,6 @@ ** modifier UNLESS the lower order bits are saved and ORed back in when ** the macro is used. *************************************************************************************/ -/* -** ********************* PLL AND RESET MASKS ****************************************/ -/* PLL_CTL Masks */ -#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */ -#define PLL_OFF 0x0002 /* PLL Not Powered */ -#define STOPCK 0x0008 /* Core Clock Off */ -#define PDWN 0x0020 /* Enter Deep Sleep Mode */ -#define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */ -#define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */ -#define BYPASS 0x0100 /* Bypass the PLL */ -#define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */ -/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */ -#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */ - -/* PLL_DIV Masks */ -#define SSEL 0x000F /* System Select */ -#define CSEL 0x0030 /* Core Select */ -#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */ -#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */ -#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */ -#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */ -/* PLL_DIV Macros */ -#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */ - -/* VR_CTL Masks */ -#define FREQ 0x3000 /* Switching Oscillator Frequency For Regulator */ -#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */ - -#define VLEV 0x00F0 /* Internal Voltage Level */ -#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ -#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ -#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ -#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ -#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ -#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ -#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ -#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ -#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */ -#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ - -#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ -#define USBWE 0x0200 /* Enable USB Wakeup From Hibernate */ -#define PHYWE 0x0400 /* Enable PHY Wakeup From Hibernate */ -#define CLKBUFOE 0x4000 /* CLKIN Buffer Output Enable */ -#define PHYCLKOE CLKBUFOE /* Alternative legacy name for the above */ -#define SCKELOW 0x8000 /* Enable Drive CKE Low During Reset */ - -/* PLL_STAT Masks */ -#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ -#define FULL_ON 0x0002 /* Processor In Full On Mode */ -#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */ -#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ /* CHIPID Masks */ #define CHIPID_VERSION 0xF0000000 @@ -757,66 +705,6 @@ #define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Wakeup Disable Peripheral #x */ -/* ********* WATCHDOG TIMER MASKS ******************** */ - -/* Watchdog Timer WDOG_CTL Register Masks */ - -#define WDEV(x) (((x)<<1) & 0x0006) /* event generated on roll over */ -#define WDEV_RESET 0x0000 /* generate reset event on roll over */ -#define WDEV_NMI 0x0002 /* generate NMI event on roll over */ -#define WDEV_GPI 0x0004 /* generate GP IRQ on roll over */ -#define WDEV_NONE 0x0006 /* no event on roll over */ -#define WDEN 0x0FF0 /* enable watchdog */ -#define WDDIS 0x0AD0 /* disable watchdog */ -#define WDRO 0x8000 /* watchdog rolled over latch */ - -/* depreciated WDOG_CTL Register Masks for legacy code */ - - -#define ICTL WDEV -#define ENABLE_RESET WDEV_RESET -#define WDOG_RESET WDEV_RESET -#define ENABLE_NMI WDEV_NMI -#define WDOG_NMI WDEV_NMI -#define ENABLE_GPI WDEV_GPI -#define WDOG_GPI WDEV_GPI -#define DISABLE_EVT WDEV_NONE -#define WDOG_NONE WDEV_NONE - -#define TMR_EN WDEN -#define TMR_DIS WDDIS -#define TRO WDRO -#define ICTL_P0 0x01 - #define ICTL_P1 0x02 -#define TRO_P 0x0F - - - -/* *************** REAL TIME CLOCK MASKS **************************/ -/* RTC_STAT and RTC_ALARM Masks */ -#define RTC_SEC 0x0000003F /* Real-Time Clock Seconds */ -#define RTC_MIN 0x00000FC0 /* Real-Time Clock Minutes */ -#define RTC_HR 0x0001F000 /* Real-Time Clock Hours */ -#define RTC_DAY 0xFFFE0000 /* Real-Time Clock Days */ - -/* RTC_ALARM Macro z=day y=hr x=min w=sec */ -#define SET_ALARM(z,y,x,w) ((((z)&0x7FFF)<<0x11)|(((y)&0x1F)<<0xC)|(((x)&0x3F)<<0x6)|((w)&0x3F)) - -/* RTC_ICTL and RTC_ISTAT Masks */ -#define STOPWATCH 0x0001 /* Stopwatch Interrupt Enable */ -#define ALARM 0x0002 /* Alarm Interrupt Enable */ -#define SECOND 0x0004 /* Seconds (1 Hz) Interrupt Enable */ -#define MINUTE 0x0008 /* Minutes Interrupt Enable */ -#define HOUR 0x0010 /* Hours Interrupt Enable */ -#define DAY 0x0020 /* 24 Hours (Days) Interrupt Enable */ -#define DAY_ALARM 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable */ -#define WRITE_PENDING 0x4000 /* Write Pending Status */ -#define WRITE_COMPLETE 0x8000 /* Write Complete Interrupt Enable */ - -/* RTC_FAST / RTC_PREN Mask */ -#define PREN 0x0001 /* Enable Prescaler, RTC Runs @1 Hz */ - - /* ************** UART CONTROLLER MASKS *************************/ /* UARTx_LCR Masks */ #define WLS(x) (((x)-5) & 0x03) /* Word Length Select */ @@ -1381,33 +1269,6 @@ /* ************************** DMA CONTROLLER MASKS ********************************/ -/* DMAx_CONFIG, MDMA_yy_CONFIG Masks */ -#define DMAEN 0x0001 /* DMA Channel Enable */ -#define WNR 0x0002 /* Channel Direction (W/R*) */ -#define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */ -#define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */ -#define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */ -#define DMA2D 0x0010 /* DMA Mode (2D/1D*) */ -#define RESTART 0x0020 /* DMA Buffer Clear */ -#define DI_SEL 0x0040 /* Data Interrupt Timing Select */ -#define DI_EN 0x0080 /* Data Interrupt Enable */ -#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ -#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ -#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ -#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ -#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ -#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ -#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ -#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ -#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ -#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ -#define NDSIZE 0x0900 /* Next Descriptor Size */ -#define DMAFLOW 0x7000 /* Flow Control */ -#define DMAFLOW_STOP 0x0000 /* Stop Mode */ -#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ -#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ -#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ -#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ /* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */ #define CTYPE 0x0040 /* DMA Channel Type Indicator (Memory/Peripheral*) */ @@ -1425,13 +1286,6 @@ #define PMAP_UART1RX 0xA000 /* UART1 Port Receive DMA */ #define PMAP_UART1TX 0xB000 /* UART1 Port Transmit DMA */ -/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */ -#define DMA_DONE 0x0001 /* DMA Completion Interrupt Status */ -#define DMA_ERR 0x0002 /* DMA Error Interrupt Status */ -#define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */ -#define DMA_RUN 0x0008 /* DMA Channel Running Indicator */ - - /* ************ PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************/ /* PPI_CONTROL Masks */ #define PORT_EN 0x0001 /* PPI Port Enable */ @@ -1843,46 +1697,6 @@ #define BNDMODE_CAPT 0x2000 /* boundary capture mode */ #define BNDMODE_AEXT 0x3000 /* boundary auto-extend mode */ -/* Bit masks for OTP_CONTROL */ - -#define FUSE_FADDR 0x1ff /* OTP/Fuse Address */ -#define FIEN 0x800 /* OTP/Fuse Interrupt Enable */ -#define nFIEN 0x0 -#define FTESTDEC 0x1000 /* OTP/Fuse Test Decoder */ -#define nFTESTDEC 0x0 -#define FWRTEST 0x2000 /* OTP/Fuse Write Test */ -#define nFWRTEST 0x0 -#define FRDEN 0x4000 /* OTP/Fuse Read Enable */ -#define nFRDEN 0x0 -#define FWREN 0x8000 /* OTP/Fuse Write Enable */ -#define nFWREN 0x0 - -/* Bit masks for OTP_BEN */ - -#define FBEN 0xffff /* OTP/Fuse Byte Enable */ - -/* Bit masks for OTP_STATUS */ - -#define FCOMP 0x1 /* OTP/Fuse Access Complete */ -#define nFCOMP 0x0 -#define FERROR 0x2 /* OTP/Fuse Access Error */ -#define nFERROR 0x0 -#define MMRGLOAD 0x10 /* Memory Mapped Register Gasket Load */ -#define nMMRGLOAD 0x0 -#define MMRGLOCK 0x20 /* Memory Mapped Register Gasket Lock */ -#define nMMRGLOCK 0x0 -#define FPGMEN 0x40 /* OTP/Fuse Program Enable */ -#define nFPGMEN 0x0 - -/* Bit masks for OTP_TIMING */ - -#define USECDIV 0xff /* Micro Second Divider */ -#define READACC 0x7f00 /* Read Access Time */ -#define CPUMPRL 0x38000 /* Charge Pump Release Time */ -#define CPUMPSU 0xc0000 /* Charge Pump Setup Time */ -#define CPUMPHD 0xf00000 /* Charge Pump Hold Time */ -#define PGMTIME 0xff000000 /* Program Time */ - /* Bit masks for SECURE_SYSSWT */ #define EMUDABL 0x1 /* Emulation Disable. */ diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c index 43f43a0..4adceb0 100644 --- a/arch/blackfin/mach-bf533/boards/H8606.c +++ b/arch/blackfin/mach-bf533/boards/H8606.c @@ -166,7 +166,6 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { #if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE) /* SPI ADC chip */ static struct bfin5xx_spi_chip spi_adc_chip_info = { - .ctl_reg = 0x1000, .enable_dma = 1, /* use dma transfer with this chip*/ .bits_per_word = 16, }; @@ -174,7 +173,6 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { - .ctl_reg = 0x1000, .enable_dma = 0, .bits_per_word = 16, }; @@ -258,12 +256,6 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) -static struct platform_device bfin_fb_device = { - .name = "bf537-fb", -}; -#endif - #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) static struct resource bfin_uart_resources[] = { { diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c index 644be5e..8ec42ba 100644 --- a/arch/blackfin/mach-bf533/boards/ip0x.c +++ b/arch/blackfin/mach-bf533/boards/ip0x.c @@ -20,6 +20,7 @@ #endif #include <asm/irq.h> #include <asm/bfin5xx_spi.h> +#include <asm/portmux.h> /* * Name the Board for the /proc/cpuinfo @@ -107,20 +108,6 @@ static struct platform_device dm9000_device2 = { #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) static struct bfin5xx_spi_chip mmc_spi_chip_info = { -/* - * CPOL (Clock Polarity) - * 0 - Active high SCK - * 1 - Active low SCK - * CPHA (Clock Phase) Selects transfer format and operation mode - * 0 - SCLK toggles from middle of the first data bit, slave select - * pins controlled by hardware. - * 1 - SCLK toggles from beginning of first data bit, slave select - * pins controller by user software. - * .ctl_reg = 0x1c00, * CPOL=1,CPHA=1,Sandisk 1G work - * NO NO .ctl_reg = 0x1800, * CPOL=1,CPHA=0 - * NO NO .ctl_reg = 0x1400, * CPOL=0,CPHA=1 - */ - .ctl_reg = 0x1000, /* CPOL=0,CPHA=0,Sandisk 1G work */ .enable_dma = 0, /* if 1 - block!!! */ .bits_per_word = 8, }; diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index 82f70ef..6d68dcf 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -321,12 +321,6 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) -static struct platform_device bfin_fb_device = { - .name = "bf537-fb", -}; -#endif - #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) static struct resource bfin_uart_resources[] = { { diff --git a/arch/blackfin/mach-bf533/include/mach/defBF532.h b/arch/blackfin/mach-bf533/include/mach/defBF532.h index 02b328e..e9ff491 100644 --- a/arch/blackfin/mach-bf533/include/mach/defBF532.h +++ b/arch/blackfin/mach-bf533/include/mach/defBF532.h @@ -370,72 +370,6 @@ /* System MMR Register Bits */ /******************************************************************************* */ -/* ********************* PLL AND RESET MASKS ************************ */ - -/* PLL_CTL Masks */ -#define PLL_CLKIN 0x0000 /* Pass CLKIN to PLL */ -#define PLL_CLKIN_DIV2 0x0001 /* Pass CLKIN/2 to PLL */ -#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */ -#define PLL_OFF 0x0002 /* Shut off PLL clocks */ -#define STOPCK_OFF 0x0008 /* Core clock off */ -#define STOPCK 0x0008 /* Core Clock Off */ -#define PDWN 0x0020 /* Put the PLL in a Deep Sleep state */ -#if !defined(__ADSPBF538__) -/* this file is included in defBF538.h but IN_DELAY/OUT_DELAY are different */ -# define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */ -# define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */ -#endif -#define BYPASS 0x0100 /* Bypass the PLL */ -/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */ -#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */ - -/* PLL_DIV Masks */ -#define SSEL 0x000F /* System Select */ -#define CSEL 0x0030 /* Core Select */ - -#define SCLK_DIV(x) (x) /* SCLK = VCO / x */ - -#define CCLK_DIV1 0x00000000 /* CCLK = VCO / 1 */ -#define CCLK_DIV2 0x00000010 /* CCLK = VCO / 2 */ -#define CCLK_DIV4 0x00000020 /* CCLK = VCO / 4 */ -#define CCLK_DIV8 0x00000030 /* CCLK = VCO / 8 */ -/* PLL_DIV Macros */ -#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */ - -/* PLL_STAT Masks */ -#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ -#define FULL_ON 0x0002 /* Processor In Full On Mode */ -#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */ -#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ - -/* VR_CTL Masks */ -#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */ -#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */ -#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */ -#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */ -#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */ - -#define GAIN 0x000C /* Voltage Level Gain */ -#define GAIN_5 0x0000 /* GAIN = 5 */ -#define GAIN_10 0x0004 /* GAIN = 10 */ -#define GAIN_20 0x0008 /* GAIN = 20 */ -#define GAIN_50 0x000C /* GAIN = 50 */ - -#define VLEV 0x00F0 /* Internal Voltage Level */ -#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ -#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ -#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ -#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ -#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ -#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ -#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ -#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ -#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */ -#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ - -#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ -#define SCKELOW 0x8000 /* Do Not Drive SCKE High During Reset After Hibernate */ - /* CHIPID Masks */ #define CHIPID_VERSION 0xF0000000 #define CHIPID_FAMILY 0x0FFFF000 @@ -703,54 +637,7 @@ /* ********** DMA CONTROLLER MASKS *********************8 */ -/*DMAx_CONFIG, MDMA_yy_CONFIG Masks */ -#define DMAEN 0x00000001 /* Channel Enable */ -#define WNR 0x00000002 /* Channel Direction (W/R*) */ -#define WDSIZE_8 0x00000000 /* Word Size 8 bits */ -#define WDSIZE_16 0x00000004 /* Word Size 16 bits */ -#define WDSIZE_32 0x00000008 /* Word Size 32 bits */ -#define DMA2D 0x00000010 /* 2D/1D* Mode */ -#define RESTART 0x00000020 /* Restart */ -#define DI_SEL 0x00000040 /* Data Interrupt Select */ -#define DI_EN 0x00000080 /* Data Interrupt Enable */ -#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ -#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ -#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ -#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ -#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ -#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ -#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ -#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ -#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ -#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ -#define NDSIZE 0x00000900 /* Next Descriptor Size */ -#define DMAFLOW 0x00007000 /* Flow Control */ -#define DMAFLOW_STOP 0x0000 /* Stop Mode */ -#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ -#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ -#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ -#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ - -#define DMAEN_P 0 /* Channel Enable */ -#define WNR_P 1 /* Channel Direction (W/R*) */ -#define DMA2D_P 4 /* 2D/1D* Mode */ -#define RESTART_P 5 /* Restart */ -#define DI_SEL_P 6 /* Data Interrupt Select */ -#define DI_EN_P 7 /* Data Interrupt Enable */ - -/*DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */ - -#define DMA_DONE 0x00000001 /* DMA Done Indicator */ -#define DMA_ERR 0x00000002 /* DMA Error Indicator */ -#define DFETCH 0x00000004 /* Descriptor Fetch Indicator */ -#define DMA_RUN 0x00000008 /* DMA Running Indicator */ - -#define DMA_DONE_P 0 /* DMA Done Indicator */ -#define DMA_ERR_P 1 /* DMA Error Indicator */ -#define DFETCH_P 2 /* Descriptor Fetch Indicator */ -#define DMA_RUN_P 3 /* DMA Running Indicator */ - -/*DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */ +/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */ #define CTYPE 0x00000040 /* DMA Channel Type Indicator */ #define CTYPE_P 6 /* DMA Channel Type Indicator BIT POSITION */ diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index 9ba2904..4e0afda 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -13,9 +13,6 @@ #include <linux/mtd/partitions.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) -#include <linux/usb/isp1362.h> -#endif #include <linux/irq.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> @@ -147,45 +144,6 @@ static struct platform_device sl811_hcd_device = { }; #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) -static struct resource isp1362_hcd_resources[] = { - { - .start = 0x20360000, - .end = 0x20360000, - .flags = IORESOURCE_MEM, - }, { - .start = 0x20360004, - .end = 0x20360004, - .flags = IORESOURCE_MEM, - }, { - .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, - .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; - -static struct isp1362_platform_data isp1362_priv = { - .sel15Kres = 1, - .clknotstop = 0, - .oc_enable = 0, - .int_act_high = 0, - .int_edge_triggered = 0, - .remote_wakeup_connected = 0, - .no_power_switching = 1, - .power_switching_mode = 0, -}; - -static struct platform_device isp1362_hcd_device = { - .name = "isp1362-hcd", - .id = 0, - .dev = { - .platform_data = &isp1362_priv, - }, - .num_resources = ARRAY_SIZE(isp1362_hcd_resources), - .resource = isp1362_hcd_resources, -}; -#endif - #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) static struct platform_device bfin_mii_bus = { .name = "bfin_mii_bus", @@ -492,10 +450,6 @@ static struct platform_device *stamp_devices[] __initdata = { &sl811_hcd_device, #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) - &isp1362_hcd_device, -#endif - #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) &smc91x_device, #endif diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index c46baa5..ac9b52e 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -9,6 +9,7 @@ #include <linux/device.h> #include <linux/kernel.h> #include <linux/platform_device.h> +#include <linux/io.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> @@ -25,6 +26,8 @@ #include <linux/i2c.h> #include <linux/usb/sl811.h> #include <linux/spi/mmc_spi.h> +#include <linux/leds.h> +#include <linux/input.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> #include <asm/reboot.h> @@ -65,7 +68,7 @@ static struct isp1760_platform_data isp1760_priv = { }; static struct platform_device bfin_isp1760_device = { - .name = "isp1760-hcd", + .name = "isp1760", .id = 0, .dev = { .platform_data = &isp1760_priv, @@ -76,7 +79,6 @@ static struct platform_device bfin_isp1760_device = { #endif #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -#include <linux/input.h> #include <linux/gpio_keys.h> static struct gpio_keys_button bfin_gpio_keys_table[] = { @@ -195,28 +197,6 @@ static struct platform_device dm9000_device = { }; #endif -#if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE) -static struct resource ax88180_resources[] = { - [0] = { - .start = 0x20300000, - .end = 0x20300000 + 0x8000, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PF7, - .end = IRQ_PF7, - .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL), - }, -}; - -static struct platform_device ax88180_device = { - .name = "ax88180", - .id = -1, - .num_resources = ARRAY_SIZE(ax88180_resources), - .resource = ax88180_resources, -}; -#endif - #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) static struct resource sl811_hcd_resources[] = { { @@ -272,8 +252,8 @@ static struct resource isp1362_hcd_resources[] = { .end = 0x20360004, .flags = IORESOURCE_MEM, }, { - .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, - .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, + .start = IRQ_PF3, + .end = IRQ_PF3, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, }, }; @@ -300,6 +280,44 @@ static struct platform_device isp1362_hcd_device = { }; #endif +#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) +unsigned short bfin_can_peripherals[] = { + P_CAN0_RX, P_CAN0_TX, 0 +}; + +static struct resource bfin_can_resources[] = { + { + .start = 0xFFC02A00, + .end = 0xFFC02FFF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_CAN_RX, + .end = IRQ_CAN_RX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_CAN_TX, + .end = IRQ_CAN_TX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_CAN_ERROR, + .end = IRQ_CAN_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_can_device = { + .name = "bfin_can", + .num_resources = ARRAY_SIZE(bfin_can_resources), + .resource = bfin_can_resources, + .dev = { + .platform_data = &bfin_can_peripherals, /* Passed to driver */ + }, +}; +#endif + #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) static struct platform_device bfin_mii_bus = { .name = "bfin_mii_bus", @@ -514,15 +532,14 @@ static struct bfin5xx_spi_chip ad1938_spi_chip_info = { }; #endif -#if defined(CONFIG_INPUT_EVAL_AD7147EBZ) -#include <linux/input.h> +#if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE) #include <linux/input/ad714x.h> static struct bfin5xx_spi_chip ad7147_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16, }; -static struct ad714x_slider_plat slider_plat[] = { +static struct ad714x_slider_plat ad7147_spi_slider_plat[] = { { .start_stage = 0, .end_stage = 7, @@ -530,7 +547,7 @@ static struct ad714x_slider_plat slider_plat[] = { }, }; -static struct ad714x_button_plat button_plat[] = { +static struct ad714x_button_plat ad7147_spi_button_plat[] = { { .keycode = BTN_FORWARD, .l_mask = 0, @@ -557,11 +574,11 @@ static struct ad714x_button_plat button_plat[] = { .h_mask = 0x400, }, }; -static struct ad714x_platform_data ad7147_platfrom_data = { +static struct ad714x_platform_data ad7147_spi_platform_data = { .slider_num = 1, .button_num = 5, - .slider = slider_plat, - .button = button_plat, + .slider = ad7147_spi_slider_plat, + .button = ad7147_spi_button_plat, .stage_cfg_reg = { {0xFBFF, 0x1FFF, 0, 0x2626, 1600, 1600, 1600, 1600}, {0xEFFF, 0x1FFF, 0, 0x2626, 1650, 1650, 1650, 1650}, @@ -580,10 +597,9 @@ static struct ad714x_platform_data ad7147_platfrom_data = { }; #endif -#if defined(CONFIG_INPUT_EVAL_AD7142EB) -#include <linux/input.h> +#if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE) #include <linux/input/ad714x.h> -static struct ad714x_button_plat button_plat[] = { +static struct ad714x_button_plat ad7142_i2c_button_plat[] = { { .keycode = BTN_1, .l_mask = 0, @@ -605,9 +621,9 @@ static struct ad714x_button_plat button_plat[] = { .h_mask = 0x8, }, }; -static struct ad714x_platform_data ad7142_platfrom_data = { +static struct ad714x_platform_data ad7142_i2c_platform_data = { .button_num = 4, - .button = button_plat, + .button = ad7142_i2c_button_plat, .stage_cfg_reg = { /* fixme: figure out right setting for all comoponent according * to hardware feature of EVAL-AD7142EB board */ @@ -696,8 +712,7 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = { #endif #if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE) -#include <linux/input.h> -#include <linux/spi/adxl34x.h> +#include <linux/input/adxl34x.h> static const struct adxl34x_platform_data adxl34x_info = { .x_axis_offset = 0, .y_axis_offset = 0, @@ -721,9 +736,7 @@ static const struct adxl34x_platform_data adxl34x_info = { .ev_code_y = ABS_Y, /* EV_REL */ .ev_code_z = ABS_Z, /* EV_REL */ - .ev_code_tap_x = BTN_TOUCH, /* EV_KEY */ - .ev_code_tap_y = BTN_TOUCH, /* EV_KEY */ - .ev_code_tap_z = BTN_TOUCH, /* EV_KEY */ + .ev_code_tap = {BTN_TOUCH, BTN_TOUCH, BTN_TOUCH}, /* EV_KEY x,y,z */ /* .ev_code_ff = KEY_F,*/ /* EV_KEY */ /* .ev_code_act_inactivity = KEY_A,*/ /* EV_KEY */ @@ -761,6 +774,47 @@ static struct bfin5xx_spi_chip enc28j60_spi_chip_info = { }; #endif +#if defined(CONFIG_ADF702X) || defined(CONFIG_ADF702X_MODULE) +static struct bfin5xx_spi_chip adf7021_spi_chip_info = { + .bits_per_word = 16, + .cs_gpio = GPIO_PF10, +}; + +#include <linux/spi/adf702x.h> +#define TXREG 0x0160A470 +static const u32 adf7021_regs[] = { + 0x09608FA0, + 0x00575011, + 0x00A7F092, + 0x2B141563, + 0x81F29E94, + 0x00003155, + 0x050A4F66, + 0x00000007, + 0x00000008, + 0x000231E9, + 0x3296354A, + 0x891A2B3B, + 0x00000D9C, + 0x0000000D, + 0x0000000E, + 0x0000000F, +}; + +static struct adf702x_platform_data adf7021_platform_data = { + .regs_base = (void *)SPORT1_TCR1, + .dma_ch_rx = CH_SPORT1_RX, + .dma_ch_tx = CH_SPORT1_TX, + .irq_sport_err = IRQ_SPORT1_ERROR, + .gpio_int_rfs = GPIO_PF8, + .pin_req = {P_SPORT1_DTPRI, P_SPORT1_RFS, P_SPORT1_DRPRI, + P_SPORT1_RSCLK, P_SPORT1_TSCLK, 0}, + .adf702x_model = MODEL_ADF7021, + .adf702x_regs = adf7021_regs, + .tx_reg = TXREG, +}; +#endif + #if defined(CONFIG_MTD_DATAFLASH) \ || defined(CONFIG_MTD_DATAFLASH_MODULE) @@ -794,6 +848,13 @@ static struct bfin5xx_spi_chip data_flash_chip_info = { }; #endif +#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE) +static struct bfin5xx_spi_chip spi_adxl34x_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip*/ + .bits_per_word = 8, +}; +#endif + static struct spi_board_info bfin_spi_board_info[] __initdata = { #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) @@ -855,7 +916,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_INPUT_EVAL_AD7147EBZ) +#if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE) { .modalias = "ad714x_captouch", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -863,7 +924,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .bus_num = 0, .chip_select = 5, .mode = SPI_MODE_3, - .platform_data = &ad7147_platfrom_data, + .platform_data = &ad7147_spi_platform_data, .controller_data = &ad7147_spi_chip_info, }, #endif @@ -932,6 +993,30 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_0, }, #endif +#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE) + { + .modalias = "adxl34x", + .platform_data = &adxl34x_info, + .irq = IRQ_PF6, + .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 2, + .controller_data = &spi_adxl34x_chip_info, + .mode = SPI_MODE_3, + }, +#endif +#if defined(CONFIG_ADF702X) || defined(CONFIG_ADF702X_MODULE) + { + .modalias = "adf702x", + .max_speed_hz = 16000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 0, /* GPIO controlled SSEL */ + .controller_data = &adf7021_spi_chip_info, + .platform_data = &adf7021_platform_data, + .mode = SPI_MODE_0, + }, +#endif + }; #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) @@ -1175,7 +1260,6 @@ static struct platform_device i2c_bfin_twi_device = { #endif #if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE) -#include <linux/input.h> #include <linux/i2c/adp5588.h> static const unsigned short adp5588_keymap[ADP5588_KEYMAPSIZE] = { [0] = KEY_GRAVE, @@ -1268,35 +1352,33 @@ static struct adp5588_kpad_platform_data adp5588_kpad_data = { * ADP5520/5501 Backlight Data */ -static struct adp5520_backlight_platfrom_data adp5520_backlight_data = { - .fade_in = FADE_T_1200ms, - .fade_out = FADE_T_1200ms, - .fade_led_law = BL_LAW_LINEAR, - .en_ambl_sens = 1, - .abml_filt = BL_AMBL_FILT_640ms, - .l1_daylight_max = BL_CUR_mA(15), - .l1_daylight_dim = BL_CUR_mA(0), - .l2_office_max = BL_CUR_mA(7), - .l2_office_dim = BL_CUR_mA(0), - .l3_dark_max = BL_CUR_mA(3), - .l3_dark_dim = BL_CUR_mA(0), - .l2_trip = L2_COMP_CURR_uA(700), - .l2_hyst = L2_COMP_CURR_uA(50), - .l3_trip = L3_COMP_CURR_uA(80), - .l3_hyst = L3_COMP_CURR_uA(20), +static struct adp5520_backlight_platform_data adp5520_backlight_data = { + .fade_in = ADP5520_FADE_T_1200ms, + .fade_out = ADP5520_FADE_T_1200ms, + .fade_led_law = ADP5520_BL_LAW_LINEAR, + .en_ambl_sens = 1, + .abml_filt = ADP5520_BL_AMBL_FILT_640ms, + .l1_daylight_max = ADP5520_BL_CUR_mA(15), + .l1_daylight_dim = ADP5520_BL_CUR_mA(0), + .l2_office_max = ADP5520_BL_CUR_mA(7), + .l2_office_dim = ADP5520_BL_CUR_mA(0), + .l3_dark_max = ADP5520_BL_CUR_mA(3), + .l3_dark_dim = ADP5520_BL_CUR_mA(0), + .l2_trip = ADP5520_L2_COMP_CURR_uA(700), + .l2_hyst = ADP5520_L2_COMP_CURR_uA(50), + .l3_trip = ADP5520_L3_COMP_CURR_uA(80), + .l3_hyst = ADP5520_L3_COMP_CURR_uA(20), }; /* * ADP5520/5501 LEDs Data */ -#include <linux/leds.h> - static struct led_info adp5520_leds[] = { { .name = "adp5520-led1", .default_trigger = "none", - .flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | LED_OFFT_600ms, + .flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | ADP5520_LED_OFFT_600ms, }, #ifdef ADP5520_EN_ALL_LEDS { @@ -1312,51 +1394,50 @@ static struct led_info adp5520_leds[] = { #endif }; -static struct adp5520_leds_platfrom_data adp5520_leds_data = { +static struct adp5520_leds_platform_data adp5520_leds_data = { .num_leds = ARRAY_SIZE(adp5520_leds), .leds = adp5520_leds, - .fade_in = FADE_T_600ms, - .fade_out = FADE_T_600ms, - .led_on_time = LED_ONT_600ms, + .fade_in = ADP5520_FADE_T_600ms, + .fade_out = ADP5520_FADE_T_600ms, + .led_on_time = ADP5520_LED_ONT_600ms, }; /* * ADP5520 GPIO Data */ -static struct adp5520_gpio_platfrom_data adp5520_gpio_data = { +static struct adp5520_gpio_platform_data adp5520_gpio_data = { .gpio_start = 50, - .gpio_en_mask = GPIO_C1 | GPIO_C2 | GPIO_R2, - .gpio_pullup_mask = GPIO_C1 | GPIO_C2 | GPIO_R2, + .gpio_en_mask = ADP5520_GPIO_C1 | ADP5520_GPIO_C2 | ADP5520_GPIO_R2, + .gpio_pullup_mask = ADP5520_GPIO_C1 | ADP5520_GPIO_C2 | ADP5520_GPIO_R2, }; /* * ADP5520 Keypad Data */ -#include <linux/input.h> static const unsigned short adp5520_keymap[ADP5520_KEYMAPSIZE] = { - [KEY(0, 0)] = KEY_GRAVE, - [KEY(0, 1)] = KEY_1, - [KEY(0, 2)] = KEY_2, - [KEY(0, 3)] = KEY_3, - [KEY(1, 0)] = KEY_4, - [KEY(1, 1)] = KEY_5, - [KEY(1, 2)] = KEY_6, - [KEY(1, 3)] = KEY_7, - [KEY(2, 0)] = KEY_8, - [KEY(2, 1)] = KEY_9, - [KEY(2, 2)] = KEY_0, - [KEY(2, 3)] = KEY_MINUS, - [KEY(3, 0)] = KEY_EQUAL, - [KEY(3, 1)] = KEY_BACKSLASH, - [KEY(3, 2)] = KEY_BACKSPACE, - [KEY(3, 3)] = KEY_ENTER, -}; - -static struct adp5520_keys_platfrom_data adp5520_keys_data = { - .rows_en_mask = ROW_R3 | ROW_R2 | ROW_R1 | ROW_R0, - .cols_en_mask = COL_C3 | COL_C2 | COL_C1 | COL_C0, + [ADP5520_KEY(0, 0)] = KEY_GRAVE, + [ADP5520_KEY(0, 1)] = KEY_1, + [ADP5520_KEY(0, 2)] = KEY_2, + [ADP5520_KEY(0, 3)] = KEY_3, + [ADP5520_KEY(1, 0)] = KEY_4, + [ADP5520_KEY(1, 1)] = KEY_5, + [ADP5520_KEY(1, 2)] = KEY_6, + [ADP5520_KEY(1, 3)] = KEY_7, + [ADP5520_KEY(2, 0)] = KEY_8, + [ADP5520_KEY(2, 1)] = KEY_9, + [ADP5520_KEY(2, 2)] = KEY_0, + [ADP5520_KEY(2, 3)] = KEY_MINUS, + [ADP5520_KEY(3, 0)] = KEY_EQUAL, + [ADP5520_KEY(3, 1)] = KEY_BACKSLASH, + [ADP5520_KEY(3, 2)] = KEY_BACKSPACE, + [ADP5520_KEY(3, 3)] = KEY_ENTER, +}; + +static struct adp5520_keys_platform_data adp5520_keys_data = { + .rows_en_mask = ADP5520_ROW_R3 | ADP5520_ROW_R2 | ADP5520_ROW_R1 | ADP5520_ROW_R0, + .cols_en_mask = ADP5520_COL_C3 | ADP5520_COL_C2 | ADP5520_COL_C1 | ADP5520_COL_C0, .keymap = adp5520_keymap, .keymapsize = ARRAY_SIZE(adp5520_keymap), .repeat = 0, @@ -1366,50 +1447,81 @@ static struct adp5520_keys_platfrom_data adp5520_keys_data = { * ADP5520/5501 Multifuction Device Init Data */ -static struct adp5520_subdev_info adp5520_subdevs[] = { - { - .name = "adp5520-backlight", - .id = ID_ADP5520, - .platform_data = &adp5520_backlight_data, - }, - { - .name = "adp5520-led", - .id = ID_ADP5520, - .platform_data = &adp5520_leds_data, - }, - { - .name = "adp5520-gpio", - .id = ID_ADP5520, - .platform_data = &adp5520_gpio_data, - }, - { - .name = "adp5520-keys", - .id = ID_ADP5520, - .platform_data = &adp5520_keys_data, - }, -}; - static struct adp5520_platform_data adp5520_pdev_data = { - .num_subdevs = ARRAY_SIZE(adp5520_subdevs), - .subdevs = adp5520_subdevs, + .backlight = &adp5520_backlight_data, + .leds = &adp5520_leds_data, + .gpio = &adp5520_gpio_data, + .keys = &adp5520_keys_data, }; #endif #if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE) #include <linux/i2c/adp5588.h> -static struct adp5588_gpio_platfrom_data adp5588_gpio_data = { +static struct adp5588_gpio_platform_data adp5588_gpio_data = { .gpio_start = 50, .pullup_dis_mask = 0, }; #endif +#if defined(CONFIG_BACKLIGHT_ADP8870) || defined(CONFIG_BACKLIGHT_ADP8870_MODULE) +#include <linux/i2c/adp8870.h> +static struct led_info adp8870_leds[] = { + { + .name = "adp8870-led7", + .default_trigger = "none", + .flags = ADP8870_LED_D7 | ADP8870_LED_OFFT_600ms, + }, +}; + + +static struct adp8870_backlight_platform_data adp8870_pdata = { + .bl_led_assign = ADP8870_BL_D1 | ADP8870_BL_D2 | ADP8870_BL_D3 | + ADP8870_BL_D4 | ADP8870_BL_D5 | ADP8870_BL_D6, /* 1 = Backlight 0 = Individual LED */ + .pwm_assign = 0, /* 1 = Enables PWM mode */ + + .bl_fade_in = ADP8870_FADE_T_1200ms, /* Backlight Fade-In Timer */ + .bl_fade_out = ADP8870_FADE_T_1200ms, /* Backlight Fade-Out Timer */ + .bl_fade_law = ADP8870_FADE_LAW_CUBIC1, /* fade-on/fade-off transfer characteristic */ + + .en_ambl_sens = 1, /* 1 = enable ambient light sensor */ + .abml_filt = ADP8870_BL_AMBL_FILT_320ms, /* Light sensor filter time */ + + .l1_daylight_max = ADP8870_BL_CUR_mA(20), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l1_daylight_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l2_bright_max = ADP8870_BL_CUR_mA(14), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l2_bright_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l3_office_max = ADP8870_BL_CUR_mA(6), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l3_office_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l4_indoor_max = ADP8870_BL_CUR_mA(3), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l4_indor_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l5_dark_max = ADP8870_BL_CUR_mA(2), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l5_dark_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + + .l2_trip = ADP8870_L2_COMP_CURR_uA(710), /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */ + .l2_hyst = ADP8870_L2_COMP_CURR_uA(73), /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */ + .l3_trip = ADP8870_L3_COMP_CURR_uA(389), /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */ + .l3_hyst = ADP8870_L3_COMP_CURR_uA(54), /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */ + .l4_trip = ADP8870_L4_COMP_CURR_uA(167), /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */ + .l4_hyst = ADP8870_L4_COMP_CURR_uA(16), /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */ + .l5_trip = ADP8870_L5_COMP_CURR_uA(43), /* use L5_COMP_CURR_uA(I) 0 <= I <= 138 uA */ + .l5_hyst = ADP8870_L5_COMP_CURR_uA(11), /* use L6_COMP_CURR_uA(I) 0 <= I <= 138 uA */ + + .leds = adp8870_leds, + .num_leds = ARRAY_SIZE(adp8870_leds), + .led_fade_law = ADP8870_FADE_LAW_SQUARE, /* fade-on/fade-off transfer characteristic */ + .led_fade_in = ADP8870_FADE_T_600ms, + .led_fade_out = ADP8870_FADE_T_600ms, + .led_on_time = ADP8870_LED_ONT_200ms, +}; +#endif + static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_INPUT_EVAL_AD7142EB) +#if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE) { I2C_BOARD_INFO("ad7142_captouch", 0x2C), .irq = IRQ_PG5, - .platform_data = (void *)&ad7142_platfrom_data, + .platform_data = (void *)&ad7142_i2c_platform_data, }, #endif #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) @@ -1462,6 +1574,32 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { I2C_BOARD_INFO("bfin-adv7393", 0x2B), }, #endif +#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) + { + I2C_BOARD_INFO("bf537-lq035-ad5280", 0x2C), + }, +#endif +#if defined(CONFIG_BACKLIGHT_ADP8870) || defined(CONFIG_BACKLIGHT_ADP8870_MODULE) + { + I2C_BOARD_INFO("adp8870", 0x2B), + .platform_data = (void *)&adp8870_pdata, + }, +#endif +#if defined(CONFIG_SND_SOC_ADAU1371) || defined(CONFIG_SND_SOC_ADAU1371_MODULE) + { + I2C_BOARD_INFO("adau1371", 0x1A), + }, +#endif +#if defined(CONFIG_SND_SOC_ADAU1761) || defined(CONFIG_SND_SOC_ADAU1761_MODULE) + { + I2C_BOARD_INFO("adau1761", 0x38), + }, +#endif +#if defined(CONFIG_AD525X_DPOT) || defined(CONFIG_AD525X_DPOT_MODULE) + { + I2C_BOARD_INFO("ad5258", 0x18), + }, +#endif }; #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) @@ -1602,8 +1740,8 @@ static struct platform_device *stamp_devices[] __initdata = { &dm9000_device, #endif -#if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE) - &ax88180_device, +#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) + &bfin_can_device, #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) diff --git a/arch/blackfin/mach-bf537/include/mach/bf537.h b/arch/blackfin/mach-bf537/include/mach/bf537.h index 17fab44..8b29141 100644 --- a/arch/blackfin/mach-bf537/include/mach/bf537.h +++ b/arch/blackfin/mach-bf537/include/mach/bf537.h @@ -9,16 +9,6 @@ #ifndef __MACH_BF537_H__ #define __MACH_BF537_H__ -/* Masks for generic ERROR IRQ demultiplexing used in int-priority-sc.c */ - -#define SPI_ERR_MASK (TXCOL | RBSY | MODF | TXE) /* SPI_STAT */ -#define SPORT_ERR_MASK (ROVF | RUVF | TOVF | TUVF) /* SPORTx_STAT */ -#define PPI_ERR_MASK (0xFFFF & ~FLD) /* PPI_STATUS */ -#define EMAC_ERR_MASK (PHYINT | MMCINT | RXFSINT | TXFSINT | WAKEDET | RXDMAERR | TXDMAERR | STMDONE) /* EMAC_SYSTAT */ -#define UART_ERR_MASK_STAT1 (0x4) /* UARTx_IIR */ -#define UART_ERR_MASK_STAT0 (0x2) /* UARTx_IIR */ -#define CAN_ERR_MASK (EWTIF | EWRIF | EPIF | BOIF | WUIF | UIAIF | AAIF | RMLIF | UCEIF | EXTIF | ADIF) /* CAN_GIF */ - #define OFFSET_(x) ((x) & 0x0000FFFF) /*some misc defines*/ diff --git a/arch/blackfin/mach-bf537/include/mach/blackfin.h b/arch/blackfin/mach-bf537/include/mach/blackfin.h index eab006d..a12d4b6 100644 --- a/arch/blackfin/mach-bf537/include/mach/blackfin.h +++ b/arch/blackfin/mach-bf537/include/mach/blackfin.h @@ -40,10 +40,4 @@ #define OFFSET_SCR 0x1C /* SCR Scratch Register */ #define OFFSET_GCTL 0x24 /* Global Control Register */ -/* PLL_DIV Masks */ -#define CCLK_DIV1 CSEL_DIV1 /* CCLK = VCO / 1 */ -#define CCLK_DIV2 CSEL_DIV2 /* CCLK = VCO / 2 */ -#define CCLK_DIV4 CSEL_DIV4 /* CCLK = VCO / 4 */ -#define CCLK_DIV8 CSEL_DIV8 /* CCLK = VCO / 8 */ - #endif diff --git a/arch/blackfin/mach-bf537/include/mach/defBF534.h b/arch/blackfin/mach-bf537/include/mach/defBF534.h index a6d20ca..066d5c2 100644 --- a/arch/blackfin/mach-bf537/include/mach/defBF534.h +++ b/arch/blackfin/mach-bf537/include/mach/defBF534.h @@ -958,67 +958,6 @@ ** modifier UNLESS the lower order bits are saved and ORed back in when ** the macro is used. *************************************************************************************/ -/* -** ********************* PLL AND RESET MASKS ****************************************/ -/* PLL_CTL Masks */ -#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */ -#define PLL_OFF 0x0002 /* PLL Not Powered */ -#define STOPCK 0x0008 /* Core Clock Off */ -#define PDWN 0x0020 /* Enter Deep Sleep Mode */ -#define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */ -#define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */ -#define BYPASS 0x0100 /* Bypass the PLL */ -#define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */ -/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */ -#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */ - -/* PLL_DIV Masks */ -#define SSEL 0x000F /* System Select */ -#define CSEL 0x0030 /* Core Select */ -#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */ -#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */ -#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */ -#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */ -/* PLL_DIV Macros */ -#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */ - -/* VR_CTL Masks */ -#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */ -#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */ -#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */ -#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */ -#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */ - -#define GAIN 0x000C /* Voltage Level Gain */ -#define GAIN_5 0x0000 /* GAIN = 5 */ -#define GAIN_10 0x0004 /* GAIN = 10 */ -#define GAIN_20 0x0008 /* GAIN = 20 */ -#define GAIN_50 0x000C /* GAIN = 50 */ - -#define VLEV 0x00F0 /* Internal Voltage Level */ -#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ -#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ -#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ -#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ -#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ -#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ -#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ -#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ -#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */ -#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ - -#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ -#define CANWE 0x0200 /* Enable CAN Wakeup From Hibernate */ -#define PHYWE 0x0400 /* Enable PHY Wakeup From Hibernate */ -#define CLKBUFOE 0x4000 /* CLKIN Buffer Output Enable */ -#define PHYCLKOE CLKBUFOE /* Alternative legacy name for the above */ -#define SCKELOW 0x8000 /* Enable Drive CKE Low During Reset */ - -/* PLL_STAT Masks */ -#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ -#define FULL_ON 0x0002 /* Processor In Full On Mode */ -#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */ -#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ /* CHIPID Masks */ #define CHIPID_VERSION 0xF0000000 @@ -1645,34 +1584,6 @@ #define BGSTAT 0x0020 /* Bus Grant Status */ /* ************************** DMA CONTROLLER MASKS ********************************/ -/* DMAx_CONFIG, MDMA_yy_CONFIG Masks */ -#define DMAEN 0x0001 /* DMA Channel Enable */ -#define WNR 0x0002 /* Channel Direction (W/R*) */ -#define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */ -#define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */ -#define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */ -#define DMA2D 0x0010 /* DMA Mode (2D/1D*) */ -#define RESTART 0x0020 /* DMA Buffer Clear */ -#define DI_SEL 0x0040 /* Data Interrupt Timing Select */ -#define DI_EN 0x0080 /* Data Interrupt Enable */ -#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ -#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ -#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ -#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ -#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ -#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ -#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ -#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ -#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ -#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ -#define NDSIZE 0x0900 /* Next Descriptor Size */ - -#define DMAFLOW 0x7000 /* Flow Control */ -#define DMAFLOW_STOP 0x0000 /* Stop Mode */ -#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ -#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ -#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ -#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ /* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */ #define CTYPE 0x0040 /* DMA Channel Type Indicator (Memory/Peripheral*) */ @@ -1690,12 +1601,6 @@ #define PMAP_UART1RX 0xA000 /* UART1 Port Receive DMA */ #define PMAP_UART1TX 0xB000 /* UART1 Port Transmit DMA */ -/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */ -#define DMA_DONE 0x0001 /* DMA Completion Interrupt Status */ -#define DMA_ERR 0x0002 /* DMA Error Interrupt Status */ -#define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */ -#define DMA_RUN 0x0008 /* DMA Channel Running Indicator */ - /* ************ PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************/ /* PPI_CONTROL Masks */ #define PORT_EN 0x0001 /* PPI Port Enable */ diff --git a/arch/blackfin/mach-bf538/Makefile b/arch/blackfin/mach-bf538/Makefile index 8cd2719..c0be54f 100644 --- a/arch/blackfin/mach-bf538/Makefile +++ b/arch/blackfin/mach-bf538/Makefile @@ -3,3 +3,4 @@ # obj-y := ints-priority.o dma.o +obj-$(CONFIG_GPIOLIB) += ext-gpio.o diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c index 14af5c2..c296bb1 100644 --- a/arch/blackfin/mach-bf538/boards/ezkit.c +++ b/arch/blackfin/mach-bf538/boards/ezkit.c @@ -151,6 +151,44 @@ static struct platform_device bfin_sir2_device = { #endif #endif +#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) +unsigned short bfin_can_peripherals[] = { + P_CAN0_RX, P_CAN0_TX, 0 +}; + +static struct resource bfin_can_resources[] = { + { + .start = 0xFFC02A00, + .end = 0xFFC02FFF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_CAN_RX, + .end = IRQ_CAN_RX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_CAN_TX, + .end = IRQ_CAN_TX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_CAN_ERROR, + .end = IRQ_CAN_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_can_device = { + .name = "bfin_can", + .num_resources = ARRAY_SIZE(bfin_can_resources), + .resource = bfin_can_resources, + .dev = { + .platform_data = &bfin_can_peripherals, /* Passed to driver */ + }, +}; +#endif + /* * USB-LAN EzExtender board * Driver needs to know address, irq and flag pin. @@ -610,6 +648,10 @@ static struct platform_device *cm_bf538_devices[] __initdata = { #endif #endif +#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) + &bfin_can_device, +#endif + #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) &smc91x_device, #endif diff --git a/arch/blackfin/mach-bf538/ext-gpio.c b/arch/blackfin/mach-bf538/ext-gpio.c new file mode 100644 index 0000000..180b125 --- /dev/null +++ b/arch/blackfin/mach-bf538/ext-gpio.c @@ -0,0 +1,123 @@ +/* + * GPIOLIB interface for BF538/9 PORT C, D, and E GPIOs + * + * Copyright 2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/module.h> +#include <linux/err.h> +#include <asm/blackfin.h> +#include <asm/gpio.h> +#include <asm/portmux.h> + +#define DEFINE_REG(reg, off) \ +static inline u16 read_##reg(void __iomem *port) \ + { return bfin_read16(port + off); } \ +static inline void write_##reg(void __iomem *port, u16 v) \ + { bfin_write16(port + off, v); } + +DEFINE_REG(PORTIO, 0x00) +DEFINE_REG(PORTIO_CLEAR, 0x10) +DEFINE_REG(PORTIO_SET, 0x20) +DEFINE_REG(PORTIO_DIR, 0x40) +DEFINE_REG(PORTIO_INEN, 0x50) + +static void __iomem *gpio_chip_to_mmr(struct gpio_chip *chip) +{ + switch (chip->base) { + default: /* not really needed, but keeps gcc happy */ + case GPIO_PC0: return (void __iomem *)PORTCIO; + case GPIO_PD0: return (void __iomem *)PORTDIO; + case GPIO_PE0: return (void __iomem *)PORTEIO; + } +} + +static int bf538_gpio_get_value(struct gpio_chip *chip, unsigned gpio) +{ + void __iomem *port = gpio_chip_to_mmr(chip); + return !!(read_PORTIO(port) & (1u << gpio)); +} + +static void bf538_gpio_set_value(struct gpio_chip *chip, unsigned gpio, int value) +{ + void __iomem *port = gpio_chip_to_mmr(chip); + if (value) + write_PORTIO_SET(port, (1u << gpio)); + else + write_PORTIO_CLEAR(port, (1u << gpio)); +} + +static int bf538_gpio_direction_input(struct gpio_chip *chip, unsigned gpio) +{ + void __iomem *port = gpio_chip_to_mmr(chip); + write_PORTIO_DIR(port, read_PORTIO_DIR(port) & ~(1u << gpio)); + write_PORTIO_INEN(port, read_PORTIO_INEN(port) | (1u << gpio)); + return 0; +} + +static int bf538_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, int value) +{ + void __iomem *port = gpio_chip_to_mmr(chip); + write_PORTIO_INEN(port, read_PORTIO_INEN(port) & ~(1u << gpio)); + bf538_gpio_set_value(port, gpio, value); + write_PORTIO_DIR(port, read_PORTIO_DIR(port) | (1u << gpio)); + return 0; +} + +static int bf538_gpio_request(struct gpio_chip *chip, unsigned gpio) +{ + return bfin_special_gpio_request(chip->base + gpio, chip->label); +} + +static void bf538_gpio_free(struct gpio_chip *chip, unsigned gpio) +{ + return bfin_special_gpio_free(chip->base + gpio); +} + +/* We don't set the irq fields as these banks cannot generate interrupts */ + +static struct gpio_chip bf538_portc_chip = { + .label = "GPIO-PC", + .direction_input = bf538_gpio_direction_input, + .get = bf538_gpio_get_value, + .direction_output = bf538_gpio_direction_output, + .set = bf538_gpio_set_value, + .request = bf538_gpio_request, + .free = bf538_gpio_free, + .base = GPIO_PC0, + .ngpio = GPIO_PC9 - GPIO_PC0 + 1, +}; + +static struct gpio_chip bf538_portd_chip = { + .label = "GPIO-PD", + .direction_input = bf538_gpio_direction_input, + .get = bf538_gpio_get_value, + .direction_output = bf538_gpio_direction_output, + .set = bf538_gpio_set_value, + .request = bf538_gpio_request, + .free = bf538_gpio_free, + .base = GPIO_PD0, + .ngpio = GPIO_PD13 - GPIO_PD0 + 1, +}; + +static struct gpio_chip bf538_porte_chip = { + .label = "GPIO-PE", + .direction_input = bf538_gpio_direction_input, + .get = bf538_gpio_get_value, + .direction_output = bf538_gpio_direction_output, + .set = bf538_gpio_set_value, + .request = bf538_gpio_request, + .free = bf538_gpio_free, + .base = GPIO_PE0, + .ngpio = GPIO_PE15 - GPIO_PE0 + 1, +}; + +static int __init bf538_extgpio_setup(void) +{ + return gpiochip_add(&bf538_portc_chip) | + gpiochip_add(&bf538_portd_chip) | + gpiochip_add(&bf538_porte_chip); +} +arch_initcall(bf538_extgpio_setup); diff --git a/arch/blackfin/mach-bf538/include/mach/blackfin.h b/arch/blackfin/mach-bf538/include/mach/blackfin.h index 278e894..08b5eab 100644 --- a/arch/blackfin/mach-bf538/include/mach/blackfin.h +++ b/arch/blackfin/mach-bf538/include/mach/blackfin.h @@ -37,10 +37,4 @@ #define OFFSET_SCR 0x1C /* SCR Scratch Register */ #define OFFSET_GCTL 0x24 /* Global Control Register */ -/* PLL_DIV Masks */ -#define CCLK_DIV1 CSEL_DIV1 /* CCLK = VCO / 1 */ -#define CCLK_DIV2 CSEL_DIV2 /* CCLK = VCO / 2 */ -#define CCLK_DIV4 CSEL_DIV4 /* CCLK = VCO / 4 */ -#define CCLK_DIV8 CSEL_DIV8 /* CCLK = VCO / 8 */ - #endif diff --git a/arch/blackfin/mach-bf538/include/mach/defBF539.h b/arch/blackfin/mach-bf538/include/mach/defBF539.h index 5f6c34d..fac563e 100644 --- a/arch/blackfin/mach-bf538/include/mach/defBF539.h +++ b/arch/blackfin/mach-bf538/include/mach/defBF539.h @@ -468,31 +468,31 @@ /* General-Purpose Ports (0xFFC01500 - 0xFFC015FF) */ /* GPIO Port C Register Names */ -#define GPIO_C_CNFG 0xFFC01500 /* GPIO Pin Port C Configuration Register */ -#define GPIO_C_D 0xFFC01510 /* GPIO Pin Port C Data Register */ -#define GPIO_C_C 0xFFC01520 /* Clear GPIO Pin Port C Register */ -#define GPIO_C_S 0xFFC01530 /* Set GPIO Pin Port C Register */ -#define GPIO_C_T 0xFFC01540 /* Toggle GPIO Pin Port C Register */ -#define GPIO_C_DIR 0xFFC01550 /* GPIO Pin Port C Direction Register */ -#define GPIO_C_INEN 0xFFC01560 /* GPIO Pin Port C Input Enable Register */ +#define PORTCIO_FER 0xFFC01500 /* GPIO Pin Port C Configuration Register */ +#define PORTCIO 0xFFC01510 /* GPIO Pin Port C Data Register */ +#define PORTCIO_CLEAR 0xFFC01520 /* Clear GPIO Pin Port C Register */ +#define PORTCIO_SET 0xFFC01530 /* Set GPIO Pin Port C Register */ +#define PORTCIO_TOGGLE 0xFFC01540 /* Toggle GPIO Pin Port C Register */ +#define PORTCIO_DIR 0xFFC01550 /* GPIO Pin Port C Direction Register */ +#define PORTCIO_INEN 0xFFC01560 /* GPIO Pin Port C Input Enable Register */ /* GPIO Port D Register Names */ -#define GPIO_D_CNFG 0xFFC01504 /* GPIO Pin Port D Configuration Register */ -#define GPIO_D_D 0xFFC01514 /* GPIO Pin Port D Data Register */ -#define GPIO_D_C 0xFFC01524 /* Clear GPIO Pin Port D Register */ -#define GPIO_D_S 0xFFC01534 /* Set GPIO Pin Port D Register */ -#define GPIO_D_T 0xFFC01544 /* Toggle GPIO Pin Port D Register */ -#define GPIO_D_DIR 0xFFC01554 /* GPIO Pin Port D Direction Register */ -#define GPIO_D_INEN 0xFFC01564 /* GPIO Pin Port D Input Enable Register */ +#define PORTDIO_FER 0xFFC01504 /* GPIO Pin Port D Configuration Register */ +#define PORTDIO 0xFFC01514 /* GPIO Pin Port D Data Register */ +#define PORTDIO_CLEAR 0xFFC01524 /* Clear GPIO Pin Port D Register */ +#define PORTDIO_SET 0xFFC01534 /* Set GPIO Pin Port D Register */ +#define PORTDIO_TOGGLE 0xFFC01544 /* Toggle GPIO Pin Port D Register */ +#define PORTDIO_DIR 0xFFC01554 /* GPIO Pin Port D Direction Register */ +#define PORTDIO_INEN 0xFFC01564 /* GPIO Pin Port D Input Enable Register */ /* GPIO Port E Register Names */ -#define GPIO_E_CNFG 0xFFC01508 /* GPIO Pin Port E Configuration Register */ -#define GPIO_E_D 0xFFC01518 /* GPIO Pin Port E Data Register */ -#define GPIO_E_C 0xFFC01528 /* Clear GPIO Pin Port E Register */ -#define GPIO_E_S 0xFFC01538 /* Set GPIO Pin Port E Register */ -#define GPIO_E_T 0xFFC01548 /* Toggle GPIO Pin Port E Register */ -#define GPIO_E_DIR 0xFFC01558 /* GPIO Pin Port E Direction Register */ -#define GPIO_E_INEN 0xFFC01568 /* GPIO Pin Port E Input Enable Register */ +#define PORTEIO_FER 0xFFC01508 /* GPIO Pin Port E Configuration Register */ +#define PORTEIO 0xFFC01518 /* GPIO Pin Port E Data Register */ +#define PORTEIO_CLEAR 0xFFC01528 /* Clear GPIO Pin Port E Register */ +#define PORTEIO_SET 0xFFC01538 /* Set GPIO Pin Port E Register */ +#define PORTEIO_TOGGLE 0xFFC01548 /* Toggle GPIO Pin Port E Register */ +#define PORTEIO_DIR 0xFFC01558 /* GPIO Pin Port E Direction Register */ +#define PORTEIO_INEN 0xFFC01568 /* GPIO Pin Port E Input Enable Register */ /* DMA Controller 1 Traffic Control Registers (0xFFC01B00 - 0xFFC01BFF) */ @@ -1422,81 +1422,6 @@ /* System MMR Register Bits and Macros */ /******************************************************************************* */ -/* ********************* PLL AND RESET MASKS ************************ */ -/* PLL_CTL Masks */ -#define PLL_CLKIN 0x0000 /* Pass CLKIN to PLL */ -#define PLL_CLKIN_DIV2 0x0001 /* Pass CLKIN/2 to PLL */ -#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */ -#define PLL_OFF 0x0002 /* Shut off PLL clocks */ - -#define STOPCK 0x0008 /* Core Clock Off */ -#define PDWN 0x0020 /* Put the PLL in a Deep Sleep state */ -#define IN_DELAY 0x0014 /* EBIU Input Delay Select */ -#define OUT_DELAY 0x00C0 /* EBIU Output Delay Select */ -#define BYPASS 0x0100 /* Bypass the PLL */ -#define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */ - -/* PLL_CTL Macros */ -#ifdef _MISRA_RULES -#define SET_MSEL(x) (((x)&0x3Fu) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */ -#define SET_OUT_DELAY(x) (((x)&0x03u) << 0x6) -#define SET_IN_DELAY(x) ((((x)&0x02u) << 0x3) | (((x)&0x01u) << 0x2)) -#else -#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */ -#define SET_OUT_DELAY(x) (((x)&0x03) << 0x6) -#define SET_IN_DELAY(x) ((((x)&0x02) << 0x3) | (((x)&0x01) << 0x2)) -#endif /* _MISRA_RULES */ - -/* PLL_DIV Masks */ -#define SSEL 0x000F /* System Select */ -#define CSEL 0x0030 /* Core Select */ -#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */ -#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */ -#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */ -#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */ - -#define SCLK_DIV(x) (x) /* SCLK = VCO / x */ - -/* PLL_DIV Macros */ -#ifdef _MISRA_RULES -#define SET_SSEL(x) ((x)&0xFu) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */ -#else -#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */ -#endif /* _MISRA_RULES */ - -/* PLL_STAT Masks */ -#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ -#define FULL_ON 0x0002 /* Processor In Full On Mode */ -#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */ -#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ - -/* VR_CTL Masks */ -#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */ -#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */ -#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */ -#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */ -#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */ - -#define GAIN 0x000C /* Voltage Level Gain */ -#define GAIN_5 0x0000 /* GAIN = 5 */ -#define GAIN_10 0x0004 /* GAIN = 10 */ -#define GAIN_20 0x0008 /* GAIN = 20 */ -#define GAIN_50 0x000C /* GAIN = 50 */ - -#define VLEV 0x00F0 /* Internal Voltage Level - Only Program Values Within Specifications */ -#define VLEV_100 0x0090 /* VLEV = 1.00 V (See Datasheet for Regulator Tolerance) */ -#define VLEV_105 0x00A0 /* VLEV = 1.05 V (See Datasheet for Regulator Tolerance) */ -#define VLEV_110 0x00B0 /* VLEV = 1.10 V (See Datasheet for Regulator Tolerance) */ -#define VLEV_115 0x00C0 /* VLEV = 1.15 V (See Datasheet for Regulator Tolerance) */ -#define VLEV_120 0x00D0 /* VLEV = 1.20 V (See Datasheet for Regulator Tolerance) */ -#define VLEV_125 0x00E0 /* VLEV = 1.25 V (See Datasheet for Regulator Tolerance) */ -#define VLEV_130 0x00F0 /* VLEV = 1.30 V (See Datasheet for Regulator Tolerance) */ - -#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ -#define CANWE 0x0200 /* Enable CAN Wakeup From Hibernate */ -#define MXVRWE 0x0400 /* Enable MXVR Wakeup From Hibernate */ -#define SCKELOW 0x8000 /* Do Not Drive SCKE High During Reset After Hibernate */ - /* SWRST Mask */ #define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */ #define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */ @@ -1609,91 +1534,6 @@ #endif /* _MISRA_RULES */ -/* ********* WATCHDOG TIMER MASKS ******************** */ -/* Watchdog Timer WDOG_CTL Register Masks */ -#ifdef _MISRA_RULES -#define WDEV(x) (((x)<<1) & 0x0006u) /* event generated on roll over */ -#else -#define WDEV(x) (((x)<<1) & 0x0006) /* event generated on roll over */ -#endif /* _MISRA_RULES */ -#define WDEV_RESET 0x0000 /* generate reset event on roll over */ -#define WDEV_NMI 0x0002 /* generate NMI event on roll over */ -#define WDEV_GPI 0x0004 /* generate GP IRQ on roll over */ -#define WDEV_NONE 0x0006 /* no event on roll over */ -#define WDEN 0x0FF0 /* enable watchdog */ -#define WDDIS 0x0AD0 /* disable watchdog */ -#define WDRO 0x8000 /* watchdog rolled over latch */ - -/* deprecated WDOG_CTL Register Masks for legacy code */ -#define ICTL WDEV -#define ENABLE_RESET WDEV_RESET -#define WDOG_RESET WDEV_RESET -#define ENABLE_NMI WDEV_NMI -#define WDOG_NMI WDEV_NMI -#define ENABLE_GPI WDEV_GPI -#define WDOG_GPI WDEV_GPI -#define DISABLE_EVT WDEV_NONE -#define WDOG_NONE WDEV_NONE - -#define TMR_EN WDEN -#define WDOG_DISABLE WDDIS -#define TRO WDRO - -#define ICTL_P0 0x01 -#define ICTL_P1 0x02 -#define TRO_P 0x0F - - -/* *************** REAL TIME CLOCK MASKS **************************/ -/* RTC_STAT and RTC_ALARM register */ -#define RTSEC 0x0000003F /* Real-Time Clock Seconds */ -#define RTMIN 0x00000FC0 /* Real-Time Clock Minutes */ -#define RTHR 0x0001F000 /* Real-Time Clock Hours */ -#define RTDAY 0xFFFE0000 /* Real-Time Clock Days */ - -/* RTC_ICTL register */ -#define SWIE 0x0001 /* Stopwatch Interrupt Enable */ -#define AIE 0x0002 /* Alarm Interrupt Enable */ -#define SIE 0x0004 /* Seconds (1 Hz) Interrupt Enable */ -#define MIE 0x0008 /* Minutes Interrupt Enable */ -#define HIE 0x0010 /* Hours Interrupt Enable */ -#define DIE 0x0020 /* 24 Hours (Days) Interrupt Enable */ -#define DAIE 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable */ -#define WCIE 0x8000 /* Write Complete Interrupt Enable */ - -/* RTC_ISTAT register */ -#define SWEF 0x0001 /* Stopwatch Event Flag */ -#define AEF 0x0002 /* Alarm Event Flag */ -#define SEF 0x0004 /* Seconds (1 Hz) Event Flag */ -#define MEF 0x0008 /* Minutes Event Flag */ -#define HEF 0x0010 /* Hours Event Flag */ -#define DEF 0x0020 /* 24 Hours (Days) Event Flag */ -#define DAEF 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Event Flag */ -#define WPS 0x4000 /* Write Pending Status (RO) */ -#define WCOM 0x8000 /* Write Complete */ - -/* RTC_FAST Mask (RTC_PREN Mask) */ -#define ENABLE_PRESCALE 0x00000001 /* Enable prescaler so RTC runs at 1 Hz */ -#define PREN 0x00000001 - /* ** Must be set after power-up for proper operation of RTC */ - -/* Deprecated RTC_STAT and RTC_ALARM Masks */ -#define RTC_SEC RTSEC /* Real-Time Clock Seconds */ -#define RTC_MIN RTMIN /* Real-Time Clock Minutes */ -#define RTC_HR RTHR /* Real-Time Clock Hours */ -#define RTC_DAY RTDAY /* Real-Time Clock Days */ - -/* Deprecated RTC_ICTL/RTC_ISTAT Masks */ -#define STOPWATCH SWIE /* Stopwatch Interrupt Enable */ -#define ALARM AIE /* Alarm Interrupt Enable */ -#define SECOND SIE /* Seconds (1 Hz) Interrupt Enable */ -#define MINUTE MIE /* Minutes Interrupt Enable */ -#define HOUR HIE /* Hours Interrupt Enable */ -#define DAY DIE /* 24 Hours (Days) Interrupt Enable */ -#define DAY_ALARM DAIE /* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable */ -#define WRITE_COMPLETE WCIE /* Write Complete Interrupt Enable */ - - /* ***************************** UART CONTROLLER MASKS ********************** */ /* UARTx_LCR Register */ #ifdef _MISRA_RULES @@ -1917,52 +1757,6 @@ /* ********** DMA CONTROLLER MASKS ***********************/ -/* DMAx_CONFIG, MDMA_yy_CONFIG Masks */ -#define DMAEN 0x0001 /* Channel Enable */ -#define WNR 0x0002 /* Channel Direction (W/R*) */ -#define WDSIZE_8 0x0000 /* Word Size 8 bits */ -#define WDSIZE_16 0x0004 /* Word Size 16 bits */ -#define WDSIZE_32 0x0008 /* Word Size 32 bits */ -#define DMA2D 0x0010 /* 2D/1D* Mode */ -#define RESTART 0x0020 /* Restart */ -#define DI_SEL 0x0040 /* Data Interrupt Select */ -#define DI_EN 0x0080 /* Data Interrupt Enable */ -#define NDSIZE 0x0900 /* Next Descriptor Size */ -#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ -#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ -#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ -#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ -#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ -#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ -#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ -#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ -#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ -#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ - -#define DMAFLOW 0x7000 /* Flow Control */ -#define DMAFLOW_STOP 0x0000 /* Stop Mode */ -#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ -#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ -#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ -#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ - -#define DMAEN_P 0x0 /* Channel Enable */ -#define WNR_P 0x1 /* Channel Direction (W/R*) */ -#define DMA2D_P 0x4 /* 2D/1D* Mode */ -#define RESTART_P 0x5 /* Restart */ -#define DI_SEL_P 0x6 /* Data Interrupt Select */ -#define DI_EN_P 0x7 /* Data Interrupt Enable */ - -/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */ -#define DMA_DONE 0x0001 /* DMA Done Indicator */ -#define DMA_ERR 0x0002 /* DMA Error Indicator */ -#define DFETCH 0x0004 /* Descriptor Fetch Indicator */ -#define DMA_RUN 0x0008 /* DMA Running Indicator */ - -#define DMA_DONE_P 0x0 /* DMA Done Indicator */ -#define DMA_ERR_P 0x1 /* DMA Error Indicator */ -#define DFETCH_P 0x2 /* Descriptor Fetch Indicator */ -#define DMA_RUN_P 0x3 /* DMA Running Indicator */ /* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */ @@ -2625,1019 +2419,6 @@ #define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */ -/********************************* MXVR MASKS ****************************************/ - -/* MXVR_CONFIG Masks */ - -#define MXVREN 0x00000001lu -#define MMSM 0x00000002lu -#define ACTIVE 0x00000004lu -#define SDELAY 0x00000008lu -#define NCMRXEN 0x00000010lu -#define RWRRXEN 0x00000020lu -#define MTXEN 0x00000040lu -#define MTXON 0x00000080lu /*legacy*/ -#define MTXONB 0x00000080lu -#define EPARITY 0x00000100lu -#define MSB 0x00001E00lu -#define APRXEN 0x00002000lu -#define WAKEUP 0x00004000lu -#define LMECH 0x00008000lu - -#ifdef _MISRA_RULES -#define SET_MSB(x) (((x)&0xFu) << 0x9) -#else -#define SET_MSB(x) (((x)&0xF) << 0x9) -#endif /* _MISRA_RULES */ - - -/* MXVR_PLL_CTL_0 Masks */ - -#define MXTALCEN 0x00000001lu -#define MXTALFEN 0x00000002lu -#define MPLLMS 0x00000008lu -#define MXTALMUL 0x00000030lu -#define MPLLEN 0x00000040lu -#define MPLLEN0 0x00000040lu /* legacy */ -#define MPLLEN1 0x00000080lu /* legacy */ -#define MMCLKEN 0x00000100lu -#define MMCLKMUL 0x00001E00lu -#define MPLLRSTB 0x00002000lu -#define MPLLRSTB0 0x00002000lu /* legacy */ -#define MPLLRSTB1 0x00004000lu /* legacy */ -#define MBCLKEN 0x00010000lu -#define MBCLKDIV 0x001E0000lu -#define MPLLCDR 0x00200000lu -#define MPLLCDR0 0x00200000lu /* legacy */ -#define MPLLCDR1 0x00400000lu /* legacy */ -#define INVRX 0x00800000lu -#define MFSEN 0x01000000lu -#define MFSDIV 0x1E000000lu -#define MFSSEL 0x60000000lu -#define MFSSYNC 0x80000000lu - -#define MXTALMUL_256FS 0x00000000lu /* legacy */ -#define MXTALMUL_384FS 0x00000010lu /* legacy */ -#define MXTALMUL_512FS 0x00000020lu /* legacy */ -#define MXTALMUL_1024FS 0x00000030lu - -#define MMCLKMUL_1024FS 0x00000000lu -#define MMCLKMUL_512FS 0x00000200lu -#define MMCLKMUL_256FS 0x00000400lu -#define MMCLKMUL_128FS 0x00000600lu -#define MMCLKMUL_64FS 0x00000800lu -#define MMCLKMUL_32FS 0x00000A00lu -#define MMCLKMUL_16FS 0x00000C00lu -#define MMCLKMUL_8FS 0x00000E00lu -#define MMCLKMUL_4FS 0x00001000lu -#define MMCLKMUL_2FS 0x00001200lu -#define MMCLKMUL_1FS 0x00001400lu -#define MMCLKMUL_1536FS 0x00001A00lu -#define MMCLKMUL_768FS 0x00001C00lu -#define MMCLKMUL_384FS 0x00001E00lu - -#define MBCLKDIV_DIV2 0x00020000lu -#define MBCLKDIV_DIV4 0x00040000lu -#define MBCLKDIV_DIV8 0x00060000lu -#define MBCLKDIV_DIV16 0x00080000lu -#define MBCLKDIV_DIV32 0x000A0000lu -#define MBCLKDIV_DIV64 0x000C0000lu -#define MBCLKDIV_DIV128 0x000E0000lu -#define MBCLKDIV_DIV256 0x00100000lu -#define MBCLKDIV_DIV512 0x00120000lu -#define MBCLKDIV_DIV1024 0x00140000lu - -#define MFSDIV_DIV2 0x02000000lu -#define MFSDIV_DIV4 0x04000000lu -#define MFSDIV_DIV8 0x06000000lu -#define MFSDIV_DIV16 0x08000000lu -#define MFSDIV_DIV32 0x0A000000lu -#define MFSDIV_DIV64 0x0C000000lu -#define MFSDIV_DIV128 0x0E000000lu -#define MFSDIV_DIV256 0x10000000lu -#define MFSDIV_DIV512 0x12000000lu -#define MFSDIV_DIV1024 0x14000000lu - -#define MFSSEL_CLOCK 0x00000000lu -#define MFSSEL_PULSE_HI 0x20000000lu -#define MFSSEL_PULSE_LO 0x40000000lu - - -/* MXVR_PLL_CTL_1 Masks */ - -#define MSTO 0x00000001lu -#define MSTO0 0x00000001lu /* legacy */ -#define MHOGGD 0x00000004lu -#define MHOGGD0 0x00000004lu /* legacy */ -#define MHOGGD1 0x00000008lu /* legacy */ -#define MSHAPEREN 0x00000010lu -#define MSHAPEREN0 0x00000010lu /* legacy */ -#define MSHAPEREN1 0x00000020lu /* legacy */ -#define MPLLCNTEN 0x00008000lu -#define MPLLCNT 0xFFFF0000lu - -#ifdef _MISRA_RULES -#define SET_MPLLCNT(x) (((x)&0xFFFFu) << 0x10) -#else -#define SET_MPLLCNT(x) (((x)&0xFFFF) << 0x10) -#endif /* _MISRA_RULES */ - - -/* MXVR_PLL_CTL_2 Masks */ - -#define MSHAPERSEL 0x00000007lu -#define MCPSEL 0x000000E0lu - -/* MXVR_INT_STAT_0 Masks */ - -#define NI2A 0x00000001lu -#define NA2I 0x00000002lu -#define SBU2L 0x00000004lu -#define SBL2U 0x00000008lu -#define PRU 0x00000010lu -#define MPRU 0x00000020lu -#define DRU 0x00000040lu -#define MDRU 0x00000080lu -#define SBU 0x00000100lu -#define ATU 0x00000200lu -#define FCZ0 0x00000400lu -#define FCZ1 0x00000800lu -#define PERR 0x00001000lu -#define MH2L 0x00002000lu -#define ML2H 0x00004000lu -#define WUP 0x00008000lu -#define FU2L 0x00010000lu -#define FL2U 0x00020000lu -#define BU2L 0x00040000lu -#define BL2U 0x00080000lu -#define PCZ 0x00400000lu -#define FERR 0x00800000lu -#define CMR 0x01000000lu -#define CMROF 0x02000000lu -#define CMTS 0x04000000lu -#define CMTC 0x08000000lu -#define RWRC 0x10000000lu -#define BCZ 0x20000000lu -#define BMERR 0x40000000lu -#define DERR 0x80000000lu - - -/* MXVR_INT_EN_0 Masks */ - -#define NI2AEN NI2A -#define NA2IEN NA2I -#define SBU2LEN SBU2L -#define SBL2UEN SBL2U -#define PRUEN PRU -#define MPRUEN MPRU -#define DRUEN DRU -#define MDRUEN MDRU -#define SBUEN SBU -#define ATUEN ATU -#define FCZ0EN FCZ0 -#define FCZ1EN FCZ1 -#define PERREN PERR -#define MH2LEN MH2L -#define ML2HEN ML2H -#define WUPEN WUP -#define FU2LEN FU2L -#define FL2UEN FL2U -#define BU2LEN BU2L -#define BL2UEN BL2U -#define PCZEN PCZ -#define FERREN FERR -#define CMREN CMR -#define CMROFEN CMROF -#define CMTSEN CMTS -#define CMTCEN CMTC -#define RWRCEN RWRC -#define BCZEN BCZ -#define BMERREN BMERR -#define DERREN DERR - - -/* MXVR_INT_STAT_1 Masks */ - -#define APR 0x00000004lu -#define APROF 0x00000008lu -#define APTS 0x00000040lu -#define APTC 0x00000080lu -#define APRCE 0x00000400lu -#define APRPE 0x00000800lu - -#define HDONE0 0x00000001lu -#define DONE0 0x00000002lu -#define HDONE1 0x00000010lu -#define DONE1 0x00000020lu -#define HDONE2 0x00000100lu -#define DONE2 0x00000200lu -#define HDONE3 0x00001000lu -#define DONE3 0x00002000lu -#define HDONE4 0x00010000lu -#define DONE4 0x00020000lu -#define HDONE5 0x00100000lu -#define DONE5 0x00200000lu -#define HDONE6 0x01000000lu -#define DONE6 0x02000000lu -#define HDONE7 0x10000000lu -#define DONE7 0x20000000lu - -#define DONEX(x) (0x00000002 << (4 * (x))) -#define HDONEX(x) (0x00000001 << (4 * (x))) - - -/* MXVR_INT_EN_1 Masks */ - -#define APREN APR -#define APROFEN APROF -#define APTSEN APTS -#define APTCEN APTC -#define APRCEEN APRCE -#define APRPEEN APRPE - -#define HDONEEN0 HDONE0 -#define DONEEN0 DONE0 -#define HDONEEN1 HDONE1 -#define DONEEN1 DONE1 -#define HDONEEN2 HDONE2 -#define DONEEN2 DONE2 -#define HDONEEN3 HDONE3 -#define DONEEN3 DONE3 -#define HDONEEN4 HDONE4 -#define DONEEN4 DONE4 -#define HDONEEN5 HDONE5 -#define DONEEN5 DONE5 -#define HDONEEN6 HDONE6 -#define DONEEN6 DONE6 -#define HDONEEN7 HDONE7 -#define DONEEN7 DONE7 - -#define DONEENX(x) (0x00000002 << (4 * (x))) -#define HDONEENX(x) (0x00000001 << (4 * (x))) - - -/* MXVR_STATE_0 Masks */ - -#define NACT 0x00000001lu -#define SBLOCK 0x00000002lu -#define PFDLOCK 0x00000004lu -#define PFDLOCK0 0x00000004lu /* legacy */ -#define PDD 0x00000008lu -#define PDD0 0x00000008lu /* legacy */ -#define PVCO 0x00000010lu -#define PVCO0 0x00000010lu /* legacy */ -#define PFDLOCK1 0x00000020lu /* legacy */ -#define PDD1 0x00000040lu /* legacy */ -#define PVCO1 0x00000080lu /* legacy */ -#define APBSY 0x00000100lu -#define APARB 0x00000200lu -#define APTX 0x00000400lu -#define APRX 0x00000800lu -#define CMBSY 0x00001000lu -#define CMARB 0x00002000lu -#define CMTX 0x00004000lu -#define CMRX 0x00008000lu -#define MRXONB 0x00010000lu -#define RGSIP 0x00020000lu -#define DALIP 0x00040000lu -#define ALIP 0x00080000lu -#define RRDIP 0x00100000lu -#define RWRIP 0x00200000lu -#define FLOCK 0x00400000lu -#define BLOCK 0x00800000lu -#define RSB 0x0F000000lu -#define DERRNUM 0xF0000000lu - - -/* MXVR_STATE_1 Masks */ - -#define STXNUMB 0x0000000Flu -#define SRXNUMB 0x000000F0lu -#define APCONT 0x00000100lu -#define DMAACTIVEX 0x00FF0000lu -#define DMAACTIVE0 0x00010000lu -#define DMAACTIVE1 0x00020000lu -#define DMAACTIVE2 0x00040000lu -#define DMAACTIVE3 0x00080000lu -#define DMAACTIVE4 0x00100000lu -#define DMAACTIVE5 0x00200000lu -#define DMAACTIVE6 0x00400000lu -#define DMAACTIVE7 0x00800000lu -#define DMAPMENX 0xFF000000lu -#define DMAPMEN0 0x01000000lu -#define DMAPMEN1 0x02000000lu -#define DMAPMEN2 0x04000000lu -#define DMAPMEN3 0x08000000lu -#define DMAPMEN4 0x10000000lu -#define DMAPMEN5 0x20000000lu -#define DMAPMEN6 0x40000000lu -#define DMAPMEN7 0x80000000lu - - -/* MXVR_POSITION Masks */ - -#define PVALID 0x8000 -#define POSITION 0x003F - - -/* MXVR_MAX_POSITION Masks */ - -#define MPVALID 0x8000 -#define MPOSITION 0x003F - - -/* MXVR_DELAY Masks */ - -#define DVALID 0x8000 -#define DELAY 0x003F - - -/* MXVR_MAX_DELAY Masks */ - -#define MDVALID 0x8000 -#define MDELAY 0x003F - - -/* MXVR_LADDR Masks */ - -#define LVALID 0x80000000lu -#define LADDR 0x0000FFFFlu - - -/* MXVR_GADDR Masks */ - -#define GVALID 0x8000 -#define GADDRL 0x00FF - - -/* MXVR_AADDR Masks */ - -#define AVALID 0x80000000lu -#define AADDR 0x0000FFFFlu - - -/* MXVR_ALLOC_0 Masks */ - -#define CIU0 0x00000080lu -#define CIU1 0x00008000lu -#define CIU2 0x00800000lu -#define CIU3 0x80000000lu - -#define CL0 0x0000007Flu -#define CL1 0x00007F00lu -#define CL2 0x007F0000lu -#define CL3 0x7F000000lu - - -/* MXVR_ALLOC_1 Masks */ - -#define CIU4 0x00000080lu -#define CIU5 0x00008000lu -#define CIU6 0x00800000lu -#define CIU7 0x80000000lu - -#define CL4 0x0000007Flu -#define CL5 0x00007F00lu -#define CL6 0x007F0000lu -#define CL7 0x7F000000lu - - -/* MXVR_ALLOC_2 Masks */ - -#define CIU8 0x00000080lu -#define CIU9 0x00008000lu -#define CIU10 0x00800000lu -#define CIU11 0x80000000lu - -#define CL8 0x0000007Flu -#define CL9 0x00007F00lu -#define CL10 0x007F0000lu -#define CL11 0x7F000000lu - - -/* MXVR_ALLOC_3 Masks */ - -#define CIU12 0x00000080lu -#define CIU13 0x00008000lu -#define CIU14 0x00800000lu -#define CIU15 0x80000000lu - -#define CL12 0x0000007Flu -#define CL13 0x00007F00lu -#define CL14 0x007F0000lu -#define CL15 0x7F000000lu - - -/* MXVR_ALLOC_4 Masks */ - -#define CIU16 0x00000080lu -#define CIU17 0x00008000lu -#define CIU18 0x00800000lu -#define CIU19 0x80000000lu - -#define CL16 0x0000007Flu -#define CL17 0x00007F00lu -#define CL18 0x007F0000lu -#define CL19 0x7F000000lu - - -/* MXVR_ALLOC_5 Masks */ - -#define CIU20 0x00000080lu -#define CIU21 0x00008000lu -#define CIU22 0x00800000lu -#define CIU23 0x80000000lu - -#define CL20 0x0000007Flu -#define CL21 0x00007F00lu -#define CL22 0x007F0000lu -#define CL23 0x7F000000lu - - -/* MXVR_ALLOC_6 Masks */ - -#define CIU24 0x00000080lu -#define CIU25 0x00008000lu -#define CIU26 0x00800000lu -#define CIU27 0x80000000lu - -#define CL24 0x0000007Flu -#define CL25 0x00007F00lu -#define CL26 0x007F0000lu -#define CL27 0x7F000000lu - - -/* MXVR_ALLOC_7 Masks */ - -#define CIU28 0x00000080lu -#define CIU29 0x00008000lu -#define CIU30 0x00800000lu -#define CIU31 0x80000000lu - -#define CL28 0x0000007Flu -#define CL29 0x00007F00lu -#define CL30 0x007F0000lu -#define CL31 0x7F000000lu - - -/* MXVR_ALLOC_8 Masks */ - -#define CIU32 0x00000080lu -#define CIU33 0x00008000lu -#define CIU34 0x00800000lu -#define CIU35 0x80000000lu - -#define CL32 0x0000007Flu -#define CL33 0x00007F00lu -#define CL34 0x007F0000lu -#define CL35 0x7F000000lu - - -/* MXVR_ALLOC_9 Masks */ - -#define CIU36 0x00000080lu -#define CIU37 0x00008000lu -#define CIU38 0x00800000lu -#define CIU39 0x80000000lu - -#define CL36 0x0000007Flu -#define CL37 0x00007F00lu -#define CL38 0x007F0000lu -#define CL39 0x7F000000lu - - -/* MXVR_ALLOC_10 Masks */ - -#define CIU40 0x00000080lu -#define CIU41 0x00008000lu -#define CIU42 0x00800000lu -#define CIU43 0x80000000lu - -#define CL40 0x0000007Flu -#define CL41 0x00007F00lu -#define CL42 0x007F0000lu -#define CL43 0x7F000000lu - - -/* MXVR_ALLOC_11 Masks */ - -#define CIU44 0x00000080lu -#define CIU45 0x00008000lu -#define CIU46 0x00800000lu -#define CIU47 0x80000000lu - -#define CL44 0x0000007Flu -#define CL45 0x00007F00lu -#define CL46 0x007F0000lu -#define CL47 0x7F000000lu - - -/* MXVR_ALLOC_12 Masks */ - -#define CIU48 0x00000080lu -#define CIU49 0x00008000lu -#define CIU50 0x00800000lu -#define CIU51 0x80000000lu - -#define CL48 0x0000007Flu -#define CL49 0x00007F00lu -#define CL50 0x007F0000lu -#define CL51 0x7F000000lu - - -/* MXVR_ALLOC_13 Masks */ - -#define CIU52 0x00000080lu -#define CIU53 0x00008000lu -#define CIU54 0x00800000lu -#define CIU55 0x80000000lu - -#define CL52 0x0000007Flu -#define CL53 0x00007F00lu -#define CL54 0x007F0000lu -#define CL55 0x7F000000lu - - -/* MXVR_ALLOC_14 Masks */ - -#define CIU56 0x00000080lu -#define CIU57 0x00008000lu -#define CIU58 0x00800000lu -#define CIU59 0x80000000lu - -#define CL56 0x0000007Flu -#define CL57 0x00007F00lu -#define CL58 0x007F0000lu -#define CL59 0x7F000000lu - - -/* MXVR_SYNC_LCHAN_0 Masks */ - -#define LCHANPC0 0x0000000Flu -#define LCHANPC1 0x000000F0lu -#define LCHANPC2 0x00000F00lu -#define LCHANPC3 0x0000F000lu -#define LCHANPC4 0x000F0000lu -#define LCHANPC5 0x00F00000lu -#define LCHANPC6 0x0F000000lu -#define LCHANPC7 0xF0000000lu - - -/* MXVR_SYNC_LCHAN_1 Masks */ - -#define LCHANPC8 0x0000000Flu -#define LCHANPC9 0x000000F0lu -#define LCHANPC10 0x00000F00lu -#define LCHANPC11 0x0000F000lu -#define LCHANPC12 0x000F0000lu -#define LCHANPC13 0x00F00000lu -#define LCHANPC14 0x0F000000lu -#define LCHANPC15 0xF0000000lu - - -/* MXVR_SYNC_LCHAN_2 Masks */ - -#define LCHANPC16 0x0000000Flu -#define LCHANPC17 0x000000F0lu -#define LCHANPC18 0x00000F00lu -#define LCHANPC19 0x0000F000lu -#define LCHANPC20 0x000F0000lu -#define LCHANPC21 0x00F00000lu -#define LCHANPC22 0x0F000000lu -#define LCHANPC23 0xF0000000lu - - -/* MXVR_SYNC_LCHAN_3 Masks */ - -#define LCHANPC24 0x0000000Flu -#define LCHANPC25 0x000000F0lu -#define LCHANPC26 0x00000F00lu -#define LCHANPC27 0x0000F000lu -#define LCHANPC28 0x000F0000lu -#define LCHANPC29 0x00F00000lu -#define LCHANPC30 0x0F000000lu -#define LCHANPC31 0xF0000000lu - - -/* MXVR_SYNC_LCHAN_4 Masks */ - -#define LCHANPC32 0x0000000Flu -#define LCHANPC33 0x000000F0lu -#define LCHANPC34 0x00000F00lu -#define LCHANPC35 0x0000F000lu -#define LCHANPC36 0x000F0000lu -#define LCHANPC37 0x00F00000lu -#define LCHANPC38 0x0F000000lu -#define LCHANPC39 0xF0000000lu - - -/* MXVR_SYNC_LCHAN_5 Masks */ - -#define LCHANPC40 0x0000000Flu -#define LCHANPC41 0x000000F0lu -#define LCHANPC42 0x00000F00lu -#define LCHANPC43 0x0000F000lu -#define LCHANPC44 0x000F0000lu -#define LCHANPC45 0x00F00000lu -#define LCHANPC46 0x0F000000lu -#define LCHANPC47 0xF0000000lu - - -/* MXVR_SYNC_LCHAN_6 Masks */ - -#define LCHANPC48 0x0000000Flu -#define LCHANPC49 0x000000F0lu -#define LCHANPC50 0x00000F00lu -#define LCHANPC51 0x0000F000lu -#define LCHANPC52 0x000F0000lu -#define LCHANPC53 0x00F00000lu -#define LCHANPC54 0x0F000000lu -#define LCHANPC55 0xF0000000lu - - -/* MXVR_SYNC_LCHAN_7 Masks */ - -#define LCHANPC56 0x0000000Flu -#define LCHANPC57 0x000000F0lu -#define LCHANPC58 0x00000F00lu -#define LCHANPC59 0x0000F000lu - - -/* MXVR_DMAx_CONFIG Masks */ - -#define MDMAEN 0x00000001lu -#define DD 0x00000002lu -#define LCHAN 0x000003C0lu -#define BITSWAPEN 0x00000400lu -#define BYSWAPEN 0x00000800lu -#define MFLOW 0x00007000lu -#define FIXEDPM 0x00080000lu -#define STARTPAT 0x00300000lu -#define STOPPAT 0x00C00000lu -#define COUNTPOS 0x1C000000lu - -#define DD_TX 0x00000000lu -#define DD_RX 0x00000002lu - -#define LCHAN_0 0x00000000lu -#define LCHAN_1 0x00000040lu -#define LCHAN_2 0x00000080lu -#define LCHAN_3 0x000000C0lu -#define LCHAN_4 0x00000100lu -#define LCHAN_5 0x00000140lu -#define LCHAN_6 0x00000180lu -#define LCHAN_7 0x000001C0lu - -#define MFLOW_STOP 0x00000000lu -#define MFLOW_AUTO 0x00001000lu -#define MFLOW_PVC 0x00002000lu -#define MFLOW_PSS 0x00003000lu -#define MFLOW_PFC 0x00004000lu - -#define STARTPAT_0 0x00000000lu -#define STARTPAT_1 0x00100000lu - -#define STOPPAT_0 0x00000000lu -#define STOPPAT_1 0x00400000lu - -#define COUNTPOS_0 0x00000000lu -#define COUNTPOS_1 0x04000000lu -#define COUNTPOS_2 0x08000000lu -#define COUNTPOS_3 0x0C000000lu -#define COUNTPOS_4 0x10000000lu -#define COUNTPOS_5 0x14000000lu -#define COUNTPOS_6 0x18000000lu -#define COUNTPOS_7 0x1C000000lu - - -/* MXVR_AP_CTL Masks */ - -#define STARTAP 0x00000001lu -#define CANCELAP 0x00000002lu -#define RESETAP 0x00000004lu -#define APRBE0 0x00004000lu -#define APRBE1 0x00008000lu -#define APRBEX 0x0000C000lu - - -/* MXVR_CM_CTL Masks */ - -#define STARTCM 0x00000001lu -#define CANCELCM 0x00000002lu -#define CMRBEX 0xFFFF0000lu -#define CMRBE0 0x00010000lu -#define CMRBE1 0x00020000lu -#define CMRBE2 0x00040000lu -#define CMRBE3 0x00080000lu -#define CMRBE4 0x00100000lu -#define CMRBE5 0x00200000lu -#define CMRBE6 0x00400000lu -#define CMRBE7 0x00800000lu -#define CMRBE8 0x01000000lu -#define CMRBE9 0x02000000lu -#define CMRBE10 0x04000000lu -#define CMRBE11 0x08000000lu -#define CMRBE12 0x10000000lu -#define CMRBE13 0x20000000lu -#define CMRBE14 0x40000000lu -#define CMRBE15 0x80000000lu - - -/* MXVR_PAT_DATA_x Masks */ - -#define MATCH_DATA_0 0x000000FFlu -#define MATCH_DATA_1 0x0000FF00lu -#define MATCH_DATA_2 0x00FF0000lu -#define MATCH_DATA_3 0xFF000000lu - - - -/* MXVR_PAT_EN_x Masks */ - -#define MATCH_EN_0_0 0x00000001lu -#define MATCH_EN_0_1 0x00000002lu -#define MATCH_EN_0_2 0x00000004lu -#define MATCH_EN_0_3 0x00000008lu -#define MATCH_EN_0_4 0x00000010lu -#define MATCH_EN_0_5 0x00000020lu -#define MATCH_EN_0_6 0x00000040lu -#define MATCH_EN_0_7 0x00000080lu - -#define MATCH_EN_1_0 0x00000100lu -#define MATCH_EN_1_1 0x00000200lu -#define MATCH_EN_1_2 0x00000400lu -#define MATCH_EN_1_3 0x00000800lu -#define MATCH_EN_1_4 0x00001000lu -#define MATCH_EN_1_5 0x00002000lu -#define MATCH_EN_1_6 0x00004000lu -#define MATCH_EN_1_7 0x00008000lu - -#define MATCH_EN_2_0 0x00010000lu -#define MATCH_EN_2_1 0x00020000lu -#define MATCH_EN_2_2 0x00040000lu -#define MATCH_EN_2_3 0x00080000lu -#define MATCH_EN_2_4 0x00100000lu -#define MATCH_EN_2_5 0x00200000lu -#define MATCH_EN_2_6 0x00400000lu -#define MATCH_EN_2_7 0x00800000lu - -#define MATCH_EN_3_0 0x01000000lu -#define MATCH_EN_3_1 0x02000000lu -#define MATCH_EN_3_2 0x04000000lu -#define MATCH_EN_3_3 0x08000000lu -#define MATCH_EN_3_4 0x10000000lu -#define MATCH_EN_3_5 0x20000000lu -#define MATCH_EN_3_6 0x40000000lu -#define MATCH_EN_3_7 0x80000000lu - - -/* MXVR_ROUTING_0 Masks */ - -#define MUTE_CH0 0x00000080lu -#define MUTE_CH1 0x00008000lu -#define MUTE_CH2 0x00800000lu -#define MUTE_CH3 0x80000000lu - -#define TX_CH0 0x0000007Flu -#define TX_CH1 0x00007F00lu -#define TX_CH2 0x007F0000lu -#define TX_CH3 0x7F000000lu - - -/* MXVR_ROUTING_1 Masks */ - -#define MUTE_CH4 0x00000080lu -#define MUTE_CH5 0x00008000lu -#define MUTE_CH6 0x00800000lu -#define MUTE_CH7 0x80000000lu - -#define TX_CH4 0x0000007Flu -#define TX_CH5 0x00007F00lu -#define TX_CH6 0x007F0000lu -#define TX_CH7 0x7F000000lu - - -/* MXVR_ROUTING_2 Masks */ - -#define MUTE_CH8 0x00000080lu -#define MUTE_CH9 0x00008000lu -#define MUTE_CH10 0x00800000lu -#define MUTE_CH11 0x80000000lu - -#define TX_CH8 0x0000007Flu -#define TX_CH9 0x00007F00lu -#define TX_CH10 0x007F0000lu -#define TX_CH11 0x7F000000lu - -/* MXVR_ROUTING_3 Masks */ - -#define MUTE_CH12 0x00000080lu -#define MUTE_CH13 0x00008000lu -#define MUTE_CH14 0x00800000lu -#define MUTE_CH15 0x80000000lu - -#define TX_CH12 0x0000007Flu -#define TX_CH13 0x00007F00lu -#define TX_CH14 0x007F0000lu -#define TX_CH15 0x7F000000lu - - -/* MXVR_ROUTING_4 Masks */ - -#define MUTE_CH16 0x00000080lu -#define MUTE_CH17 0x00008000lu -#define MUTE_CH18 0x00800000lu -#define MUTE_CH19 0x80000000lu - -#define TX_CH16 0x0000007Flu -#define TX_CH17 0x00007F00lu -#define TX_CH18 0x007F0000lu -#define TX_CH19 0x7F000000lu - - -/* MXVR_ROUTING_5 Masks */ - -#define MUTE_CH20 0x00000080lu -#define MUTE_CH21 0x00008000lu -#define MUTE_CH22 0x00800000lu -#define MUTE_CH23 0x80000000lu - -#define TX_CH20 0x0000007Flu -#define TX_CH21 0x00007F00lu -#define TX_CH22 0x007F0000lu -#define TX_CH23 0x7F000000lu - - -/* MXVR_ROUTING_6 Masks */ - -#define MUTE_CH24 0x00000080lu -#define MUTE_CH25 0x00008000lu -#define MUTE_CH26 0x00800000lu -#define MUTE_CH27 0x80000000lu - -#define TX_CH24 0x0000007Flu -#define TX_CH25 0x00007F00lu -#define TX_CH26 0x007F0000lu -#define TX_CH27 0x7F000000lu - - -/* MXVR_ROUTING_7 Masks */ - -#define MUTE_CH28 0x00000080lu -#define MUTE_CH29 0x00008000lu -#define MUTE_CH30 0x00800000lu -#define MUTE_CH31 0x80000000lu - -#define TX_CH28 0x0000007Flu -#define TX_CH29 0x00007F00lu -#define TX_CH30 0x007F0000lu -#define TX_CH31 0x7F000000lu - - -/* MXVR_ROUTING_8 Masks */ - -#define MUTE_CH32 0x00000080lu -#define MUTE_CH33 0x00008000lu -#define MUTE_CH34 0x00800000lu -#define MUTE_CH35 0x80000000lu - -#define TX_CH32 0x0000007Flu -#define TX_CH33 0x00007F00lu -#define TX_CH34 0x007F0000lu -#define TX_CH35 0x7F000000lu - - -/* MXVR_ROUTING_9 Masks */ - -#define MUTE_CH36 0x00000080lu -#define MUTE_CH37 0x00008000lu -#define MUTE_CH38 0x00800000lu -#define MUTE_CH39 0x80000000lu - -#define TX_CH36 0x0000007Flu -#define TX_CH37 0x00007F00lu -#define TX_CH38 0x007F0000lu -#define TX_CH39 0x7F000000lu - - -/* MXVR_ROUTING_10 Masks */ - -#define MUTE_CH40 0x00000080lu -#define MUTE_CH41 0x00008000lu -#define MUTE_CH42 0x00800000lu -#define MUTE_CH43 0x80000000lu - -#define TX_CH40 0x0000007Flu -#define TX_CH41 0x00007F00lu -#define TX_CH42 0x007F0000lu -#define TX_CH43 0x7F000000lu - - -/* MXVR_ROUTING_11 Masks */ - -#define MUTE_CH44 0x00000080lu -#define MUTE_CH45 0x00008000lu -#define MUTE_CH46 0x00800000lu -#define MUTE_CH47 0x80000000lu - -#define TX_CH44 0x0000007Flu -#define TX_CH45 0x00007F00lu -#define TX_CH46 0x007F0000lu -#define TX_CH47 0x7F000000lu - - -/* MXVR_ROUTING_12 Masks */ - -#define MUTE_CH48 0x00000080lu -#define MUTE_CH49 0x00008000lu -#define MUTE_CH50 0x00800000lu -#define MUTE_CH51 0x80000000lu - -#define TX_CH48 0x0000007Flu -#define TX_CH49 0x00007F00lu -#define TX_CH50 0x007F0000lu -#define TX_CH51 0x7F000000lu - - -/* MXVR_ROUTING_13 Masks */ - -#define MUTE_CH52 0x00000080lu -#define MUTE_CH53 0x00008000lu -#define MUTE_CH54 0x00800000lu -#define MUTE_CH55 0x80000000lu - -#define TX_CH52 0x0000007Flu -#define TX_CH53 0x00007F00lu -#define TX_CH54 0x007F0000lu -#define TX_CH55 0x7F000000lu - - -/* MXVR_ROUTING_14 Masks */ - -#define MUTE_CH56 0x00000080lu -#define MUTE_CH57 0x00008000lu -#define MUTE_CH58 0x00800000lu -#define MUTE_CH59 0x80000000lu - -#define TX_CH56 0x0000007Flu -#define TX_CH57 0x00007F00lu -#define TX_CH58 0x007F0000lu -#define TX_CH59 0x7F000000lu - - -/* Control Message Receive Buffer (CMRB) Address Offsets */ - -#define CMRB_STRIDE 0x00000016lu - -#define CMRB_DST_OFFSET 0x00000000lu -#define CMRB_SRC_OFFSET 0x00000002lu -#define CMRB_DATA_OFFSET 0x00000005lu - - -/* Control Message Transmit Buffer (CMTB) Address Offsets */ - -#define CMTB_PRIO_OFFSET 0x00000000lu -#define CMTB_DST_OFFSET 0x00000002lu -#define CMTB_SRC_OFFSET 0x00000004lu -#define CMTB_TYPE_OFFSET 0x00000006lu -#define CMTB_DATA_OFFSET 0x00000007lu - -#define CMTB_ANSWER_OFFSET 0x0000000Alu - -#define CMTB_STAT_N_OFFSET 0x00000018lu -#define CMTB_STAT_A_OFFSET 0x00000016lu -#define CMTB_STAT_D_OFFSET 0x0000000Elu -#define CMTB_STAT_R_OFFSET 0x00000014lu -#define CMTB_STAT_W_OFFSET 0x00000014lu -#define CMTB_STAT_G_OFFSET 0x00000014lu - - -/* Asynchronous Packet Receive Buffer (APRB) Address Offsets */ - -#define APRB_STRIDE 0x00000400lu - -#define APRB_DST_OFFSET 0x00000000lu -#define APRB_LEN_OFFSET 0x00000002lu -#define APRB_SRC_OFFSET 0x00000004lu -#define APRB_DATA_OFFSET 0x00000006lu - - -/* Asynchronous Packet Transmit Buffer (APTB) Address Offsets */ - -#define APTB_PRIO_OFFSET 0x00000000lu -#define APTB_DST_OFFSET 0x00000002lu -#define APTB_LEN_OFFSET 0x00000004lu -#define APTB_SRC_OFFSET 0x00000006lu -#define APTB_DATA_OFFSET 0x00000008lu - - -/* Remote Read Buffer (RRDB) Address Offsets */ - -#define RRDB_WADDR_OFFSET 0x00000100lu -#define RRDB_WLEN_OFFSET 0x00000101lu - - - /* ************ CONTROLLER AREA NETWORK (CAN) MASKS ***************/ /* CAN_CONTROL Masks */ #define SRS 0x0001 /* Software Reset */ diff --git a/arch/blackfin/mach-bf538/include/mach/gpio.h b/arch/blackfin/mach-bf538/include/mach/gpio.h index 295c78a..0c346fb 100644 --- a/arch/blackfin/mach-bf538/include/mach/gpio.h +++ b/arch/blackfin/mach-bf538/include/mach/gpio.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2008 Analog Devices Inc. + * Copyright (C) 2008-2009 Analog Devices Inc. * Licensed under the GPL-2 or later. */ @@ -7,11 +7,8 @@ #ifndef _MACH_GPIO_H_ #define _MACH_GPIO_H_ - /* FIXME: - * For now only support PORTF GPIOs. - * PORT C,D and E are for peripheral usage only - */ #define MAX_BLACKFIN_GPIOS 16 +#define BFIN_SPECIAL_GPIO_BANKS 3 #define GPIO_PF0 0 /* PF */ #define GPIO_PF1 1 diff --git a/arch/blackfin/mach-bf538/include/mach/portmux.h b/arch/blackfin/mach-bf538/include/mach/portmux.h index 6121cf8..0083ba1 100644 --- a/arch/blackfin/mach-bf538/include/mach/portmux.h +++ b/arch/blackfin/mach-bf538/include/mach/portmux.h @@ -7,7 +7,7 @@ #ifndef _MACH_PORTMUX_H_ #define _MACH_PORTMUX_H_ -#define MAX_RESOURCES MAX_BLACKFIN_GPIOS +#define MAX_RESOURCES 64 #define P_TMR2 (P_DONTCARE) #define P_TMR1 (P_DONTCARE) diff --git a/arch/blackfin/mach-bf548/Kconfig b/arch/blackfin/mach-bf548/Kconfig index a09623d..70189a0 100644 --- a/arch/blackfin/mach-bf548/Kconfig +++ b/arch/blackfin/mach-bf548/Kconfig @@ -1,3 +1,27 @@ +config BF542 + def_bool y + depends on BF542_std || BF542M +config BF544 + def_bool y + depends on BF544_std || BF544M +config BF547 + def_bool y + depends on BF547_std || BF547M +config BF548 + def_bool y + depends on BF548_std || BF548M +config BF549 + def_bool y + depends on BF549_std || BF549M + +config BF54xM + def_bool y + depends on (BF542M || BF544M || BF547M || BF548M || BF549M) + +config BF54x + def_bool y + depends on (BF542 || BF544 || BF547 || BF548 || BF549) + if (BF54x) source "arch/blackfin/mach-bf548/boards/Kconfig" diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 1a5286b..60193f7 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -62,7 +62,7 @@ static struct isp1760_platform_data isp1760_priv = { }; static struct platform_device bfin_isp1760_device = { - .name = "isp1760-hcd", + .name = "isp1760", .id = 0, .dev = { .platform_data = &isp1760_priv, @@ -154,7 +154,7 @@ static struct platform_device bf54x_kpad_device = { }; #endif -#if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE) +#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE) #include <asm/bfin_rotary.h> static struct bfin_rotary_platform_data bfin_rotary_data = { @@ -186,7 +186,7 @@ static struct platform_device bfin_rotary_device = { #endif #if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE) -#include <linux/spi/adxl34x.h> +#include <linux/input/adxl34x.h> static const struct adxl34x_platform_data adxl34x_info = { .x_axis_offset = 0, .y_axis_offset = 0, @@ -210,14 +210,17 @@ static const struct adxl34x_platform_data adxl34x_info = { .ev_code_y = ABS_Y, /* EV_REL */ .ev_code_z = ABS_Z, /* EV_REL */ - .ev_code_tap_x = BTN_TOUCH, /* EV_KEY */ - .ev_code_tap_y = BTN_TOUCH, /* EV_KEY */ - .ev_code_tap_z = BTN_TOUCH, /* EV_KEY */ + .ev_code_tap = {BTN_TOUCH, BTN_TOUCH, BTN_TOUCH}, /* EV_KEY x,y,z */ /* .ev_code_ff = KEY_F,*/ /* EV_KEY */ /* .ev_code_act_inactivity = KEY_A,*/ /* EV_KEY */ .power_mode = ADXL_AUTO_SLEEP | ADXL_LINK, .fifo_mode = ADXL_FIFO_STREAM, + .orientation_enable = ADXL_EN_ORIENTATION_3D, + .deadzone_angle = ADXL_DEADZONE_ANGLE_10p8, + .divisor_length = ADXL_LP_FILTER_DIVISOR_16, + /* EV_KEY {+Z, +Y, +X, -X, -Y, -Z} */ + .ev_codes_orient_3d = {BTN_Z, BTN_Y, BTN_X, BTN_A, BTN_B, BTN_C}, }; #endif @@ -461,6 +464,44 @@ static struct platform_device musb_device = { }; #endif +#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) +unsigned short bfin_can_peripherals[] = { + P_CAN0_RX, P_CAN0_TX, 0 +}; + +static struct resource bfin_can_resources[] = { + { + .start = 0xFFC02A00, + .end = 0xFFC02FFF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_CAN0_RX, + .end = IRQ_CAN0_RX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_CAN0_TX, + .end = IRQ_CAN0_TX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_CAN0_ERROR, + .end = IRQ_CAN0_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_can_device = { + .name = "bfin_can", + .num_resources = ARRAY_SIZE(bfin_can_resources), + .resource = bfin_can_resources, + .dev = { + .platform_data = &bfin_can_peripherals, /* Passed to driver */ + }, +}; +#endif + #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) static struct resource bfin_atapi_resources[] = { { @@ -953,6 +994,10 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_isp1760_device, #endif +#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) + &bfin_can_device, +#endif + #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) &bfin_atapi_device, #endif @@ -974,7 +1019,7 @@ static struct platform_device *ezkit_devices[] __initdata = { &bf54x_kpad_device, #endif -#if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE) +#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE) &bfin_rotary_device, #endif diff --git a/arch/blackfin/mach-bf548/include/mach/bf548.h b/arch/blackfin/mach-bf548/include/mach/bf548.h index 7bead5c..751e5e1 100644 --- a/arch/blackfin/mach-bf548/include/mach/bf548.h +++ b/arch/blackfin/mach-bf548/include/mach/bf548.h @@ -81,18 +81,6 @@ #define AMGCTLVAL (V_AMBEN | V_AMCKEN) -#if defined(CONFIG_BF542M) -# define CONFIG_BF542 -#elif defined(CONFIG_BF544M) -# define CONFIG_BF544 -#elif defined(CONFIG_BF547M) -# define CONFIG_BF547 -#elif defined(CONFIG_BF548M) -# define CONFIG_BF548 -#elif defined(CONFIG_BF549M) -# define CONFIG_BF549 -#endif - #if defined(CONFIG_BF542) # define CPU "BF542" # define CPUID 0x27de diff --git a/arch/blackfin/mach-bf548/include/mach/blackfin.h b/arch/blackfin/mach-bf548/include/mach/blackfin.h index 13302b6..5684030 100644 --- a/arch/blackfin/mach-bf548/include/mach/blackfin.h +++ b/arch/blackfin/mach-bf548/include/mach/blackfin.h @@ -64,10 +64,4 @@ #define OFFSET_THR 0x28 /* Transmit Holding register */ #define OFFSET_RBR 0x2C /* Receive Buffer register */ -/* PLL_DIV Masks */ -#define CCLK_DIV1 CSEL_DIV1 /* CCLK = VCO / 1 */ -#define CCLK_DIV2 CSEL_DIV2 /* CCLK = VCO / 2 */ -#define CCLK_DIV4 CSEL_DIV4 /* CCLK = VCO / 4 */ -#define CCLK_DIV8 CSEL_DIV8 /* CCLK = VCO / 8 */ - #endif diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF547.h b/arch/blackfin/mach-bf548/include/mach/cdefBF547.h index 4234215..bc650e6 100644 --- a/arch/blackfin/mach-bf548/include/mach/cdefBF547.h +++ b/arch/blackfin/mach-bf548/include/mach/cdefBF547.h @@ -4,21 +4,21 @@ * Licensed under the GPL-2 or later. */ -#ifndef _CDEF_BF548_H -#define _CDEF_BF548_H +#ifndef _CDEF_BF547_H +#define _CDEF_BF547_H /* include all Core registers and bit definitions */ -#include "defBF548.h" +#include "defBF547.h" /* include core sbfin_read_()ecific register pointer definitions */ #include <asm/cdef_LPBlackfin.h> -/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */ +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF547 */ /* include cdefBF54x_base.h for the set of #defines that are common to all ADSP-BF54x bfin_read_()rocessors */ #include "cdefBF54x_base.h" -/* The following are the #defines needed by ADSP-BF548 that are not in the common header */ +/* The following are the #defines needed by ADSP-BF547 that are not in the common header */ /* Timer Registers */ @@ -805,4 +805,4 @@ #define bfin_read_HMDMA1_BCOUNT() bfin_read16(HMDMA1_BCOUNT) #define bfin_write_HMDMA1_BCOUNT(val) bfin_write16(HMDMA1_BCOUNT, val) -#endif /* _CDEF_BF548_H */ +#endif /* _CDEF_BF547_H */ diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF548.h b/arch/blackfin/mach-bf548/include/mach/cdefBF548.h index df84180..3523e08 100644 --- a/arch/blackfin/mach-bf548/include/mach/cdefBF548.h +++ b/arch/blackfin/mach-bf548/include/mach/cdefBF548.h @@ -18,165 +18,8 @@ /* include cdefBF54x_base.h for the set of #defines that are common to all ADSP-BF54x bfin_read_()rocessors */ #include "cdefBF54x_base.h" -/* The following are the #defines needed by ADSP-BF548 that are not in the common header */ - -/* Timer Registers */ - -#define bfin_read_TIMER8_CONFIG() bfin_read16(TIMER8_CONFIG) -#define bfin_write_TIMER8_CONFIG(val) bfin_write16(TIMER8_CONFIG, val) -#define bfin_read_TIMER8_COUNTER() bfin_read32(TIMER8_COUNTER) -#define bfin_write_TIMER8_COUNTER(val) bfin_write32(TIMER8_COUNTER, val) -#define bfin_read_TIMER8_PERIOD() bfin_read32(TIMER8_PERIOD) -#define bfin_write_TIMER8_PERIOD(val) bfin_write32(TIMER8_PERIOD, val) -#define bfin_read_TIMER8_WIDTH() bfin_read32(TIMER8_WIDTH) -#define bfin_write_TIMER8_WIDTH(val) bfin_write32(TIMER8_WIDTH, val) -#define bfin_read_TIMER9_CONFIG() bfin_read16(TIMER9_CONFIG) -#define bfin_write_TIMER9_CONFIG(val) bfin_write16(TIMER9_CONFIG, val) -#define bfin_read_TIMER9_COUNTER() bfin_read32(TIMER9_COUNTER) -#define bfin_write_TIMER9_COUNTER(val) bfin_write32(TIMER9_COUNTER, val) -#define bfin_read_TIMER9_PERIOD() bfin_read32(TIMER9_PERIOD) -#define bfin_write_TIMER9_PERIOD(val) bfin_write32(TIMER9_PERIOD, val) -#define bfin_read_TIMER9_WIDTH() bfin_read32(TIMER9_WIDTH) -#define bfin_write_TIMER9_WIDTH(val) bfin_write32(TIMER9_WIDTH, val) -#define bfin_read_TIMER10_CONFIG() bfin_read16(TIMER10_CONFIG) -#define bfin_write_TIMER10_CONFIG(val) bfin_write16(TIMER10_CONFIG, val) -#define bfin_read_TIMER10_COUNTER() bfin_read32(TIMER10_COUNTER) -#define bfin_write_TIMER10_COUNTER(val) bfin_write32(TIMER10_COUNTER, val) -#define bfin_read_TIMER10_PERIOD() bfin_read32(TIMER10_PERIOD) -#define bfin_write_TIMER10_PERIOD(val) bfin_write32(TIMER10_PERIOD, val) -#define bfin_read_TIMER10_WIDTH() bfin_read32(TIMER10_WIDTH) -#define bfin_write_TIMER10_WIDTH(val) bfin_write32(TIMER10_WIDTH, val) - -/* Timer Groubfin_read_() of 3 */ - -#define bfin_read_TIMER_ENABLE1() bfin_read16(TIMER_ENABLE1) -#define bfin_write_TIMER_ENABLE1(val) bfin_write16(TIMER_ENABLE1, val) -#define bfin_read_TIMER_DISABLE1() bfin_read16(TIMER_DISABLE1) -#define bfin_write_TIMER_DISABLE1(val) bfin_write16(TIMER_DISABLE1, val) -#define bfin_read_TIMER_STATUS1() bfin_read32(TIMER_STATUS1) -#define bfin_write_TIMER_STATUS1(val) bfin_write32(TIMER_STATUS1, val) - -/* SPORT0 Registers */ - -#define bfin_read_SPORT0_TCR1() bfin_read16(SPORT0_TCR1) -#define bfin_write_SPORT0_TCR1(val) bfin_write16(SPORT0_TCR1, val) -#define bfin_read_SPORT0_TCR2() bfin_read16(SPORT0_TCR2) -#define bfin_write_SPORT0_TCR2(val) bfin_write16(SPORT0_TCR2, val) -#define bfin_read_SPORT0_TCLKDIV() bfin_read16(SPORT0_TCLKDIV) -#define bfin_write_SPORT0_TCLKDIV(val) bfin_write16(SPORT0_TCLKDIV, val) -#define bfin_read_SPORT0_TFSDIV() bfin_read16(SPORT0_TFSDIV) -#define bfin_write_SPORT0_TFSDIV(val) bfin_write16(SPORT0_TFSDIV, val) -#define bfin_read_SPORT0_TX() bfin_read32(SPORT0_TX) -#define bfin_write_SPORT0_TX(val) bfin_write32(SPORT0_TX, val) -#define bfin_read_SPORT0_RX() bfin_read32(SPORT0_RX) -#define bfin_write_SPORT0_RX(val) bfin_write32(SPORT0_RX, val) -#define bfin_read_SPORT0_RCR1() bfin_read16(SPORT0_RCR1) -#define bfin_write_SPORT0_RCR1(val) bfin_write16(SPORT0_RCR1, val) -#define bfin_read_SPORT0_RCR2() bfin_read16(SPORT0_RCR2) -#define bfin_write_SPORT0_RCR2(val) bfin_write16(SPORT0_RCR2, val) -#define bfin_read_SPORT0_RCLKDIV() bfin_read16(SPORT0_RCLKDIV) -#define bfin_write_SPORT0_RCLKDIV(val) bfin_write16(SPORT0_RCLKDIV, val) -#define bfin_read_SPORT0_RFSDIV() bfin_read16(SPORT0_RFSDIV) -#define bfin_write_SPORT0_RFSDIV(val) bfin_write16(SPORT0_RFSDIV, val) -#define bfin_read_SPORT0_STAT() bfin_read16(SPORT0_STAT) -#define bfin_write_SPORT0_STAT(val) bfin_write16(SPORT0_STAT, val) -#define bfin_read_SPORT0_CHNL() bfin_read16(SPORT0_CHNL) -#define bfin_write_SPORT0_CHNL(val) bfin_write16(SPORT0_CHNL, val) -#define bfin_read_SPORT0_MCMC1() bfin_read16(SPORT0_MCMC1) -#define bfin_write_SPORT0_MCMC1(val) bfin_write16(SPORT0_MCMC1, val) -#define bfin_read_SPORT0_MCMC2() bfin_read16(SPORT0_MCMC2) -#define bfin_write_SPORT0_MCMC2(val) bfin_write16(SPORT0_MCMC2, val) -#define bfin_read_SPORT0_MTCS0() bfin_read32(SPORT0_MTCS0) -#define bfin_write_SPORT0_MTCS0(val) bfin_write32(SPORT0_MTCS0, val) -#define bfin_read_SPORT0_MTCS1() bfin_read32(SPORT0_MTCS1) -#define bfin_write_SPORT0_MTCS1(val) bfin_write32(SPORT0_MTCS1, val) -#define bfin_read_SPORT0_MTCS2() bfin_read32(SPORT0_MTCS2) -#define bfin_write_SPORT0_MTCS2(val) bfin_write32(SPORT0_MTCS2, val) -#define bfin_read_SPORT0_MTCS3() bfin_read32(SPORT0_MTCS3) -#define bfin_write_SPORT0_MTCS3(val) bfin_write32(SPORT0_MTCS3, val) -#define bfin_read_SPORT0_MRCS0() bfin_read32(SPORT0_MRCS0) -#define bfin_write_SPORT0_MRCS0(val) bfin_write32(SPORT0_MRCS0, val) -#define bfin_read_SPORT0_MRCS1() bfin_read32(SPORT0_MRCS1) -#define bfin_write_SPORT0_MRCS1(val) bfin_write32(SPORT0_MRCS1, val) -#define bfin_read_SPORT0_MRCS2() bfin_read32(SPORT0_MRCS2) -#define bfin_write_SPORT0_MRCS2(val) bfin_write32(SPORT0_MRCS2, val) -#define bfin_read_SPORT0_MRCS3() bfin_read32(SPORT0_MRCS3) -#define bfin_write_SPORT0_MRCS3(val) bfin_write32(SPORT0_MRCS3, val) - -/* EPPI0 Registers */ - -#define bfin_read_EPPI0_STATUS() bfin_read16(EPPI0_STATUS) -#define bfin_write_EPPI0_STATUS(val) bfin_write16(EPPI0_STATUS, val) -#define bfin_read_EPPI0_HCOUNT() bfin_read16(EPPI0_HCOUNT) -#define bfin_write_EPPI0_HCOUNT(val) bfin_write16(EPPI0_HCOUNT, val) -#define bfin_read_EPPI0_HDELAY() bfin_read16(EPPI0_HDELAY) -#define bfin_write_EPPI0_HDELAY(val) bfin_write16(EPPI0_HDELAY, val) -#define bfin_read_EPPI0_VCOUNT() bfin_read16(EPPI0_VCOUNT) -#define bfin_write_EPPI0_VCOUNT(val) bfin_write16(EPPI0_VCOUNT, val) -#define bfin_read_EPPI0_VDELAY() bfin_read16(EPPI0_VDELAY) -#define bfin_write_EPPI0_VDELAY(val) bfin_write16(EPPI0_VDELAY, val) -#define bfin_read_EPPI0_FRAME() bfin_read16(EPPI0_FRAME) -#define bfin_write_EPPI0_FRAME(val) bfin_write16(EPPI0_FRAME, val) -#define bfin_read_EPPI0_LINE() bfin_read16(EPPI0_LINE) -#define bfin_write_EPPI0_LINE(val) bfin_write16(EPPI0_LINE, val) -#define bfin_read_EPPI0_CLKDIV() bfin_read16(EPPI0_CLKDIV) -#define bfin_write_EPPI0_CLKDIV(val) bfin_write16(EPPI0_CLKDIV, val) -#define bfin_read_EPPI0_CONTROL() bfin_read32(EPPI0_CONTROL) -#define bfin_write_EPPI0_CONTROL(val) bfin_write32(EPPI0_CONTROL, val) -#define bfin_read_EPPI0_FS1W_HBL() bfin_read32(EPPI0_FS1W_HBL) -#define bfin_write_EPPI0_FS1W_HBL(val) bfin_write32(EPPI0_FS1W_HBL, val) -#define bfin_read_EPPI0_FS1P_AVPL() bfin_read32(EPPI0_FS1P_AVPL) -#define bfin_write_EPPI0_FS1P_AVPL(val) bfin_write32(EPPI0_FS1P_AVPL, val) -#define bfin_read_EPPI0_FS2W_LVB() bfin_read32(EPPI0_FS2W_LVB) -#define bfin_write_EPPI0_FS2W_LVB(val) bfin_write32(EPPI0_FS2W_LVB, val) -#define bfin_read_EPPI0_FS2P_LAVF() bfin_read32(EPPI0_FS2P_LAVF) -#define bfin_write_EPPI0_FS2P_LAVF(val) bfin_write32(EPPI0_FS2P_LAVF, val) -#define bfin_read_EPPI0_CLIP() bfin_read32(EPPI0_CLIP) -#define bfin_write_EPPI0_CLIP(val) bfin_write32(EPPI0_CLIP, val) - -/* UART2 Registers */ - -#define bfin_read_UART2_DLL() bfin_read16(UART2_DLL) -#define bfin_write_UART2_DLL(val) bfin_write16(UART2_DLL, val) -#define bfin_read_UART2_DLH() bfin_read16(UART2_DLH) -#define bfin_write_UART2_DLH(val) bfin_write16(UART2_DLH, val) -#define bfin_read_UART2_GCTL() bfin_read16(UART2_GCTL) -#define bfin_write_UART2_GCTL(val) bfin_write16(UART2_GCTL, val) -#define bfin_read_UART2_LCR() bfin_read16(UART2_LCR) -#define bfin_write_UART2_LCR(val) bfin_write16(UART2_LCR, val) -#define bfin_read_UART2_MCR() bfin_read16(UART2_MCR) -#define bfin_write_UART2_MCR(val) bfin_write16(UART2_MCR, val) -#define bfin_read_UART2_LSR() bfin_read16(UART2_LSR) -#define bfin_write_UART2_LSR(val) bfin_write16(UART2_LSR, val) -#define bfin_read_UART2_MSR() bfin_read16(UART2_MSR) -#define bfin_write_UART2_MSR(val) bfin_write16(UART2_MSR, val) -#define bfin_read_UART2_SCR() bfin_read16(UART2_SCR) -#define bfin_write_UART2_SCR(val) bfin_write16(UART2_SCR, val) -#define bfin_read_UART2_IER_SET() bfin_read16(UART2_IER_SET) -#define bfin_write_UART2_IER_SET(val) bfin_write16(UART2_IER_SET, val) -#define bfin_read_UART2_IER_CLEAR() bfin_read16(UART2_IER_CLEAR) -#define bfin_write_UART2_IER_CLEAR(val) bfin_write16(UART2_IER_CLEAR, val) -#define bfin_read_UART2_RBR() bfin_read16(UART2_RBR) -#define bfin_write_UART2_RBR(val) bfin_write16(UART2_RBR, val) - -/* Two Wire Interface Registers (TWI1) */ - -/* SPI2 Registers */ - -#define bfin_read_SPI2_CTL() bfin_read16(SPI2_CTL) -#define bfin_write_SPI2_CTL(val) bfin_write16(SPI2_CTL, val) -#define bfin_read_SPI2_FLG() bfin_read16(SPI2_FLG) -#define bfin_write_SPI2_FLG(val) bfin_write16(SPI2_FLG, val) -#define bfin_read_SPI2_STAT() bfin_read16(SPI2_STAT) -#define bfin_write_SPI2_STAT(val) bfin_write16(SPI2_STAT, val) -#define bfin_read_SPI2_TDBR() bfin_read16(SPI2_TDBR) -#define bfin_write_SPI2_TDBR(val) bfin_write16(SPI2_TDBR, val) -#define bfin_read_SPI2_RDBR() bfin_read16(SPI2_RDBR) -#define bfin_write_SPI2_RDBR(val) bfin_write16(SPI2_RDBR, val) -#define bfin_read_SPI2_BAUD() bfin_read16(SPI2_BAUD) -#define bfin_write_SPI2_BAUD(val) bfin_write16(SPI2_BAUD, val) -#define bfin_read_SPI2_SHADOW() bfin_read16(SPI2_SHADOW) -#define bfin_write_SPI2_SHADOW(val) bfin_write16(SPI2_SHADOW, val) +/* The BF548 is like the BF547, but has additional CANs */ +#include "cdefBF547.h" /* CAN Controller 1 Config 1 Registers */ @@ -923,631 +766,4 @@ #define bfin_read_CAN1_MB31_ID1() bfin_read16(CAN1_MB31_ID1) #define bfin_write_CAN1_MB31_ID1(val) bfin_write16(CAN1_MB31_ID1, val) -/* ATAPI Registers */ - -#define bfin_read_ATAPI_CONTROL() bfin_read16(ATAPI_CONTROL) -#define bfin_write_ATAPI_CONTROL(val) bfin_write16(ATAPI_CONTROL, val) -#define bfin_read_ATAPI_STATUS() bfin_read16(ATAPI_STATUS) -#define bfin_write_ATAPI_STATUS(val) bfin_write16(ATAPI_STATUS, val) -#define bfin_read_ATAPI_DEV_ADDR() bfin_read16(ATAPI_DEV_ADDR) -#define bfin_write_ATAPI_DEV_ADDR(val) bfin_write16(ATAPI_DEV_ADDR, val) -#define bfin_read_ATAPI_DEV_TXBUF() bfin_read16(ATAPI_DEV_TXBUF) -#define bfin_write_ATAPI_DEV_TXBUF(val) bfin_write16(ATAPI_DEV_TXBUF, val) -#define bfin_read_ATAPI_DEV_RXBUF() bfin_read16(ATAPI_DEV_RXBUF) -#define bfin_write_ATAPI_DEV_RXBUF(val) bfin_write16(ATAPI_DEV_RXBUF, val) -#define bfin_read_ATAPI_INT_MASK() bfin_read16(ATAPI_INT_MASK) -#define bfin_write_ATAPI_INT_MASK(val) bfin_write16(ATAPI_INT_MASK, val) -#define bfin_read_ATAPI_INT_STATUS() bfin_read16(ATAPI_INT_STATUS) -#define bfin_write_ATAPI_INT_STATUS(val) bfin_write16(ATAPI_INT_STATUS, val) -#define bfin_read_ATAPI_XFER_LEN() bfin_read16(ATAPI_XFER_LEN) -#define bfin_write_ATAPI_XFER_LEN(val) bfin_write16(ATAPI_XFER_LEN, val) -#define bfin_read_ATAPI_LINE_STATUS() bfin_read16(ATAPI_LINE_STATUS) -#define bfin_write_ATAPI_LINE_STATUS(val) bfin_write16(ATAPI_LINE_STATUS, val) -#define bfin_read_ATAPI_SM_STATE() bfin_read16(ATAPI_SM_STATE) -#define bfin_write_ATAPI_SM_STATE(val) bfin_write16(ATAPI_SM_STATE, val) -#define bfin_read_ATAPI_TERMINATE() bfin_read16(ATAPI_TERMINATE) -#define bfin_write_ATAPI_TERMINATE(val) bfin_write16(ATAPI_TERMINATE, val) -#define bfin_read_ATAPI_PIO_TFRCNT() bfin_read16(ATAPI_PIO_TFRCNT) -#define bfin_write_ATAPI_PIO_TFRCNT(val) bfin_write16(ATAPI_PIO_TFRCNT, val) -#define bfin_read_ATAPI_DMA_TFRCNT() bfin_read16(ATAPI_DMA_TFRCNT) -#define bfin_write_ATAPI_DMA_TFRCNT(val) bfin_write16(ATAPI_DMA_TFRCNT, val) -#define bfin_read_ATAPI_UMAIN_TFRCNT() bfin_read16(ATAPI_UMAIN_TFRCNT) -#define bfin_write_ATAPI_UMAIN_TFRCNT(val) bfin_write16(ATAPI_UMAIN_TFRCNT, val) -#define bfin_read_ATAPI_UDMAOUT_TFRCNT() bfin_read16(ATAPI_UDMAOUT_TFRCNT) -#define bfin_write_ATAPI_UDMAOUT_TFRCNT(val) bfin_write16(ATAPI_UDMAOUT_TFRCNT, val) -#define bfin_read_ATAPI_REG_TIM_0() bfin_read16(ATAPI_REG_TIM_0) -#define bfin_write_ATAPI_REG_TIM_0(val) bfin_write16(ATAPI_REG_TIM_0, val) -#define bfin_read_ATAPI_PIO_TIM_0() bfin_read16(ATAPI_PIO_TIM_0) -#define bfin_write_ATAPI_PIO_TIM_0(val) bfin_write16(ATAPI_PIO_TIM_0, val) -#define bfin_read_ATAPI_PIO_TIM_1() bfin_read16(ATAPI_PIO_TIM_1) -#define bfin_write_ATAPI_PIO_TIM_1(val) bfin_write16(ATAPI_PIO_TIM_1, val) -#define bfin_read_ATAPI_MULTI_TIM_0() bfin_read16(ATAPI_MULTI_TIM_0) -#define bfin_write_ATAPI_MULTI_TIM_0(val) bfin_write16(ATAPI_MULTI_TIM_0, val) -#define bfin_read_ATAPI_MULTI_TIM_1() bfin_read16(ATAPI_MULTI_TIM_1) -#define bfin_write_ATAPI_MULTI_TIM_1(val) bfin_write16(ATAPI_MULTI_TIM_1, val) -#define bfin_read_ATAPI_MULTI_TIM_2() bfin_read16(ATAPI_MULTI_TIM_2) -#define bfin_write_ATAPI_MULTI_TIM_2(val) bfin_write16(ATAPI_MULTI_TIM_2, val) -#define bfin_read_ATAPI_ULTRA_TIM_0() bfin_read16(ATAPI_ULTRA_TIM_0) -#define bfin_write_ATAPI_ULTRA_TIM_0(val) bfin_write16(ATAPI_ULTRA_TIM_0, val) -#define bfin_read_ATAPI_ULTRA_TIM_1() bfin_read16(ATAPI_ULTRA_TIM_1) -#define bfin_write_ATAPI_ULTRA_TIM_1(val) bfin_write16(ATAPI_ULTRA_TIM_1, val) -#define bfin_read_ATAPI_ULTRA_TIM_2() bfin_read16(ATAPI_ULTRA_TIM_2) -#define bfin_write_ATAPI_ULTRA_TIM_2(val) bfin_write16(ATAPI_ULTRA_TIM_2, val) -#define bfin_read_ATAPI_ULTRA_TIM_3() bfin_read16(ATAPI_ULTRA_TIM_3) -#define bfin_write_ATAPI_ULTRA_TIM_3(val) bfin_write16(ATAPI_ULTRA_TIM_3, val) - -/* SDH Registers */ - -#define bfin_read_SDH_PWR_CTL() bfin_read16(SDH_PWR_CTL) -#define bfin_write_SDH_PWR_CTL(val) bfin_write16(SDH_PWR_CTL, val) -#define bfin_read_SDH_CLK_CTL() bfin_read16(SDH_CLK_CTL) -#define bfin_write_SDH_CLK_CTL(val) bfin_write16(SDH_CLK_CTL, val) -#define bfin_read_SDH_ARGUMENT() bfin_read32(SDH_ARGUMENT) -#define bfin_write_SDH_ARGUMENT(val) bfin_write32(SDH_ARGUMENT, val) -#define bfin_read_SDH_COMMAND() bfin_read16(SDH_COMMAND) -#define bfin_write_SDH_COMMAND(val) bfin_write16(SDH_COMMAND, val) -#define bfin_read_SDH_RESP_CMD() bfin_read16(SDH_RESP_CMD) -#define bfin_write_SDH_RESP_CMD(val) bfin_write16(SDH_RESP_CMD, val) -#define bfin_read_SDH_RESPONSE0() bfin_read32(SDH_RESPONSE0) -#define bfin_write_SDH_RESPONSE0(val) bfin_write32(SDH_RESPONSE0, val) -#define bfin_read_SDH_RESPONSE1() bfin_read32(SDH_RESPONSE1) -#define bfin_write_SDH_RESPONSE1(val) bfin_write32(SDH_RESPONSE1, val) -#define bfin_read_SDH_RESPONSE2() bfin_read32(SDH_RESPONSE2) -#define bfin_write_SDH_RESPONSE2(val) bfin_write32(SDH_RESPONSE2, val) -#define bfin_read_SDH_RESPONSE3() bfin_read32(SDH_RESPONSE3) -#define bfin_write_SDH_RESPONSE3(val) bfin_write32(SDH_RESPONSE3, val) -#define bfin_read_SDH_DATA_TIMER() bfin_read32(SDH_DATA_TIMER) -#define bfin_write_SDH_DATA_TIMER(val) bfin_write32(SDH_DATA_TIMER, val) -#define bfin_read_SDH_DATA_LGTH() bfin_read16(SDH_DATA_LGTH) -#define bfin_write_SDH_DATA_LGTH(val) bfin_write16(SDH_DATA_LGTH, val) -#define bfin_read_SDH_DATA_CTL() bfin_read16(SDH_DATA_CTL) -#define bfin_write_SDH_DATA_CTL(val) bfin_write16(SDH_DATA_CTL, val) -#define bfin_read_SDH_DATA_CNT() bfin_read16(SDH_DATA_CNT) -#define bfin_write_SDH_DATA_CNT(val) bfin_write16(SDH_DATA_CNT, val) -#define bfin_read_SDH_STATUS() bfin_read32(SDH_STATUS) -#define bfin_write_SDH_STATUS(val) bfin_write32(SDH_STATUS, val) -#define bfin_read_SDH_STATUS_CLR() bfin_read16(SDH_STATUS_CLR) -#define bfin_write_SDH_STATUS_CLR(val) bfin_write16(SDH_STATUS_CLR, val) -#define bfin_read_SDH_MASK0() bfin_read32(SDH_MASK0) -#define bfin_write_SDH_MASK0(val) bfin_write32(SDH_MASK0, val) -#define bfin_read_SDH_MASK1() bfin_read32(SDH_MASK1) -#define bfin_write_SDH_MASK1(val) bfin_write32(SDH_MASK1, val) -#define bfin_read_SDH_FIFO_CNT() bfin_read16(SDH_FIFO_CNT) -#define bfin_write_SDH_FIFO_CNT(val) bfin_write16(SDH_FIFO_CNT, val) -#define bfin_read_SDH_FIFO() bfin_read32(SDH_FIFO) -#define bfin_write_SDH_FIFO(val) bfin_write32(SDH_FIFO, val) -#define bfin_read_SDH_E_STATUS() bfin_read16(SDH_E_STATUS) -#define bfin_write_SDH_E_STATUS(val) bfin_write16(SDH_E_STATUS, val) -#define bfin_read_SDH_E_MASK() bfin_read16(SDH_E_MASK) -#define bfin_write_SDH_E_MASK(val) bfin_write16(SDH_E_MASK, val) -#define bfin_read_SDH_CFG() bfin_read16(SDH_CFG) -#define bfin_write_SDH_CFG(val) bfin_write16(SDH_CFG, val) -#define bfin_read_SDH_RD_WAIT_EN() bfin_read16(SDH_RD_WAIT_EN) -#define bfin_write_SDH_RD_WAIT_EN(val) bfin_write16(SDH_RD_WAIT_EN, val) -#define bfin_read_SDH_PID0() bfin_read16(SDH_PID0) -#define bfin_write_SDH_PID0(val) bfin_write16(SDH_PID0, val) -#define bfin_read_SDH_PID1() bfin_read16(SDH_PID1) -#define bfin_write_SDH_PID1(val) bfin_write16(SDH_PID1, val) -#define bfin_read_SDH_PID2() bfin_read16(SDH_PID2) -#define bfin_write_SDH_PID2(val) bfin_write16(SDH_PID2, val) -#define bfin_read_SDH_PID3() bfin_read16(SDH_PID3) -#define bfin_write_SDH_PID3(val) bfin_write16(SDH_PID3, val) -#define bfin_read_SDH_PID4() bfin_read16(SDH_PID4) -#define bfin_write_SDH_PID4(val) bfin_write16(SDH_PID4, val) -#define bfin_read_SDH_PID5() bfin_read16(SDH_PID5) -#define bfin_write_SDH_PID5(val) bfin_write16(SDH_PID5, val) -#define bfin_read_SDH_PID6() bfin_read16(SDH_PID6) -#define bfin_write_SDH_PID6(val) bfin_write16(SDH_PID6, val) -#define bfin_read_SDH_PID7() bfin_read16(SDH_PID7) -#define bfin_write_SDH_PID7(val) bfin_write16(SDH_PID7, val) - -/* HOST Port Registers */ - -#define bfin_read_HOST_CONTROL() bfin_read16(HOST_CONTROL) -#define bfin_write_HOST_CONTROL(val) bfin_write16(HOST_CONTROL, val) -#define bfin_read_HOST_STATUS() bfin_read16(HOST_STATUS) -#define bfin_write_HOST_STATUS(val) bfin_write16(HOST_STATUS, val) -#define bfin_read_HOST_TIMEOUT() bfin_read16(HOST_TIMEOUT) -#define bfin_write_HOST_TIMEOUT(val) bfin_write16(HOST_TIMEOUT, val) - -/* USB Control Registers */ - -#define bfin_read_USB_FADDR() bfin_read16(USB_FADDR) -#define bfin_write_USB_FADDR(val) bfin_write16(USB_FADDR, val) -#define bfin_read_USB_POWER() bfin_read16(USB_POWER) -#define bfin_write_USB_POWER(val) bfin_write16(USB_POWER, val) -#define bfin_read_USB_INTRTX() bfin_read16(USB_INTRTX) -#define bfin_write_USB_INTRTX(val) bfin_write16(USB_INTRTX, val) -#define bfin_read_USB_INTRRX() bfin_read16(USB_INTRRX) -#define bfin_write_USB_INTRRX(val) bfin_write16(USB_INTRRX, val) -#define bfin_read_USB_INTRTXE() bfin_read16(USB_INTRTXE) -#define bfin_write_USB_INTRTXE(val) bfin_write16(USB_INTRTXE, val) -#define bfin_read_USB_INTRRXE() bfin_read16(USB_INTRRXE) -#define bfin_write_USB_INTRRXE(val) bfin_write16(USB_INTRRXE, val) -#define bfin_read_USB_INTRUSB() bfin_read16(USB_INTRUSB) -#define bfin_write_USB_INTRUSB(val) bfin_write16(USB_INTRUSB, val) -#define bfin_read_USB_INTRUSBE() bfin_read16(USB_INTRUSBE) -#define bfin_write_USB_INTRUSBE(val) bfin_write16(USB_INTRUSBE, val) -#define bfin_read_USB_FRAME() bfin_read16(USB_FRAME) -#define bfin_write_USB_FRAME(val) bfin_write16(USB_FRAME, val) -#define bfin_read_USB_INDEX() bfin_read16(USB_INDEX) -#define bfin_write_USB_INDEX(val) bfin_write16(USB_INDEX, val) -#define bfin_read_USB_TESTMODE() bfin_read16(USB_TESTMODE) -#define bfin_write_USB_TESTMODE(val) bfin_write16(USB_TESTMODE, val) -#define bfin_read_USB_GLOBINTR() bfin_read16(USB_GLOBINTR) -#define bfin_write_USB_GLOBINTR(val) bfin_write16(USB_GLOBINTR, val) -#define bfin_read_USB_GLOBAL_CTL() bfin_read16(USB_GLOBAL_CTL) -#define bfin_write_USB_GLOBAL_CTL(val) bfin_write16(USB_GLOBAL_CTL, val) - -/* USB Packet Control Registers */ - -#define bfin_read_USB_TX_MAX_PACKET() bfin_read16(USB_TX_MAX_PACKET) -#define bfin_write_USB_TX_MAX_PACKET(val) bfin_write16(USB_TX_MAX_PACKET, val) -#define bfin_read_USB_CSR0() bfin_read16(USB_CSR0) -#define bfin_write_USB_CSR0(val) bfin_write16(USB_CSR0, val) -#define bfin_read_USB_TXCSR() bfin_read16(USB_TXCSR) -#define bfin_write_USB_TXCSR(val) bfin_write16(USB_TXCSR, val) -#define bfin_read_USB_RX_MAX_PACKET() bfin_read16(USB_RX_MAX_PACKET) -#define bfin_write_USB_RX_MAX_PACKET(val) bfin_write16(USB_RX_MAX_PACKET, val) -#define bfin_read_USB_RXCSR() bfin_read16(USB_RXCSR) -#define bfin_write_USB_RXCSR(val) bfin_write16(USB_RXCSR, val) -#define bfin_read_USB_COUNT0() bfin_read16(USB_COUNT0) -#define bfin_write_USB_COUNT0(val) bfin_write16(USB_COUNT0, val) -#define bfin_read_USB_RXCOUNT() bfin_read16(USB_RXCOUNT) -#define bfin_write_USB_RXCOUNT(val) bfin_write16(USB_RXCOUNT, val) -#define bfin_read_USB_TXTYPE() bfin_read16(USB_TXTYPE) -#define bfin_write_USB_TXTYPE(val) bfin_write16(USB_TXTYPE, val) -#define bfin_read_USB_NAKLIMIT0() bfin_read16(USB_NAKLIMIT0) -#define bfin_write_USB_NAKLIMIT0(val) bfin_write16(USB_NAKLIMIT0, val) -#define bfin_read_USB_TXINTERVAL() bfin_read16(USB_TXINTERVAL) -#define bfin_write_USB_TXINTERVAL(val) bfin_write16(USB_TXINTERVAL, val) -#define bfin_read_USB_RXTYPE() bfin_read16(USB_RXTYPE) -#define bfin_write_USB_RXTYPE(val) bfin_write16(USB_RXTYPE, val) -#define bfin_read_USB_RXINTERVAL() bfin_read16(USB_RXINTERVAL) -#define bfin_write_USB_RXINTERVAL(val) bfin_write16(USB_RXINTERVAL, val) -#define bfin_read_USB_TXCOUNT() bfin_read16(USB_TXCOUNT) -#define bfin_write_USB_TXCOUNT(val) bfin_write16(USB_TXCOUNT, val) - -/* USB Endbfin_read_()oint FIFO Registers */ - -#define bfin_read_USB_EP0_FIFO() bfin_read16(USB_EP0_FIFO) -#define bfin_write_USB_EP0_FIFO(val) bfin_write16(USB_EP0_FIFO, val) -#define bfin_read_USB_EP1_FIFO() bfin_read16(USB_EP1_FIFO) -#define bfin_write_USB_EP1_FIFO(val) bfin_write16(USB_EP1_FIFO, val) -#define bfin_read_USB_EP2_FIFO() bfin_read16(USB_EP2_FIFO) -#define bfin_write_USB_EP2_FIFO(val) bfin_write16(USB_EP2_FIFO, val) -#define bfin_read_USB_EP3_FIFO() bfin_read16(USB_EP3_FIFO) -#define bfin_write_USB_EP3_FIFO(val) bfin_write16(USB_EP3_FIFO, val) -#define bfin_read_USB_EP4_FIFO() bfin_read16(USB_EP4_FIFO) -#define bfin_write_USB_EP4_FIFO(val) bfin_write16(USB_EP4_FIFO, val) -#define bfin_read_USB_EP5_FIFO() bfin_read16(USB_EP5_FIFO) -#define bfin_write_USB_EP5_FIFO(val) bfin_write16(USB_EP5_FIFO, val) -#define bfin_read_USB_EP6_FIFO() bfin_read16(USB_EP6_FIFO) -#define bfin_write_USB_EP6_FIFO(val) bfin_write16(USB_EP6_FIFO, val) -#define bfin_read_USB_EP7_FIFO() bfin_read16(USB_EP7_FIFO) -#define bfin_write_USB_EP7_FIFO(val) bfin_write16(USB_EP7_FIFO, val) - -/* USB OTG Control Registers */ - -#define bfin_read_USB_OTG_DEV_CTL() bfin_read16(USB_OTG_DEV_CTL) -#define bfin_write_USB_OTG_DEV_CTL(val) bfin_write16(USB_OTG_DEV_CTL, val) -#define bfin_read_USB_OTG_VBUS_IRQ() bfin_read16(USB_OTG_VBUS_IRQ) -#define bfin_write_USB_OTG_VBUS_IRQ(val) bfin_write16(USB_OTG_VBUS_IRQ, val) -#define bfin_read_USB_OTG_VBUS_MASK() bfin_read16(USB_OTG_VBUS_MASK) -#define bfin_write_USB_OTG_VBUS_MASK(val) bfin_write16(USB_OTG_VBUS_MASK, val) - -/* USB Phy Control Registers */ - -#define bfin_read_USB_LINKINFO() bfin_read16(USB_LINKINFO) -#define bfin_write_USB_LINKINFO(val) bfin_write16(USB_LINKINFO, val) -#define bfin_read_USB_VPLEN() bfin_read16(USB_VPLEN) -#define bfin_write_USB_VPLEN(val) bfin_write16(USB_VPLEN, val) -#define bfin_read_USB_HS_EOF1() bfin_read16(USB_HS_EOF1) -#define bfin_write_USB_HS_EOF1(val) bfin_write16(USB_HS_EOF1, val) -#define bfin_read_USB_FS_EOF1() bfin_read16(USB_FS_EOF1) -#define bfin_write_USB_FS_EOF1(val) bfin_write16(USB_FS_EOF1, val) -#define bfin_read_USB_LS_EOF1() bfin_read16(USB_LS_EOF1) -#define bfin_write_USB_LS_EOF1(val) bfin_write16(USB_LS_EOF1, val) - -/* (APHY_CNTRL is for ADI usage only) */ - -#define bfin_read_USB_APHY_CNTRL() bfin_read16(USB_APHY_CNTRL) -#define bfin_write_USB_APHY_CNTRL(val) bfin_write16(USB_APHY_CNTRL, val) - -/* (APHY_CALIB is for ADI usage only) */ - -#define bfin_read_USB_APHY_CALIB() bfin_read16(USB_APHY_CALIB) -#define bfin_write_USB_APHY_CALIB(val) bfin_write16(USB_APHY_CALIB, val) -#define bfin_read_USB_APHY_CNTRL2() bfin_read16(USB_APHY_CNTRL2) -#define bfin_write_USB_APHY_CNTRL2(val) bfin_write16(USB_APHY_CNTRL2, val) - -/* (PHY_TEST is for ADI usage only) */ - -#define bfin_read_USB_PHY_TEST() bfin_read16(USB_PHY_TEST) -#define bfin_write_USB_PHY_TEST(val) bfin_write16(USB_PHY_TEST, val) -#define bfin_read_USB_PLLOSC_CTRL() bfin_read16(USB_PLLOSC_CTRL) -#define bfin_write_USB_PLLOSC_CTRL(val) bfin_write16(USB_PLLOSC_CTRL, val) -#define bfin_read_USB_SRP_CLKDIV() bfin_read16(USB_SRP_CLKDIV) -#define bfin_write_USB_SRP_CLKDIV(val) bfin_write16(USB_SRP_CLKDIV, val) - -/* USB Endbfin_read_()oint 0 Control Registers */ - -#define bfin_read_USB_EP_NI0_TXMAXP() bfin_read16(USB_EP_NI0_TXMAXP) -#define bfin_write_USB_EP_NI0_TXMAXP(val) bfin_write16(USB_EP_NI0_TXMAXP, val) -#define bfin_read_USB_EP_NI0_TXCSR() bfin_read16(USB_EP_NI0_TXCSR) -#define bfin_write_USB_EP_NI0_TXCSR(val) bfin_write16(USB_EP_NI0_TXCSR, val) -#define bfin_read_USB_EP_NI0_RXMAXP() bfin_read16(USB_EP_NI0_RXMAXP) -#define bfin_write_USB_EP_NI0_RXMAXP(val) bfin_write16(USB_EP_NI0_RXMAXP, val) -#define bfin_read_USB_EP_NI0_RXCSR() bfin_read16(USB_EP_NI0_RXCSR) -#define bfin_write_USB_EP_NI0_RXCSR(val) bfin_write16(USB_EP_NI0_RXCSR, val) -#define bfin_read_USB_EP_NI0_RXCOUNT() bfin_read16(USB_EP_NI0_RXCOUNT) -#define bfin_write_USB_EP_NI0_RXCOUNT(val) bfin_write16(USB_EP_NI0_RXCOUNT, val) -#define bfin_read_USB_EP_NI0_TXTYPE() bfin_read16(USB_EP_NI0_TXTYPE) -#define bfin_write_USB_EP_NI0_TXTYPE(val) bfin_write16(USB_EP_NI0_TXTYPE, val) -#define bfin_read_USB_EP_NI0_TXINTERVAL() bfin_read16(USB_EP_NI0_TXINTERVAL) -#define bfin_write_USB_EP_NI0_TXINTERVAL(val) bfin_write16(USB_EP_NI0_TXINTERVAL, val) -#define bfin_read_USB_EP_NI0_RXTYPE() bfin_read16(USB_EP_NI0_RXTYPE) -#define bfin_write_USB_EP_NI0_RXTYPE(val) bfin_write16(USB_EP_NI0_RXTYPE, val) -#define bfin_read_USB_EP_NI0_RXINTERVAL() bfin_read16(USB_EP_NI0_RXINTERVAL) -#define bfin_write_USB_EP_NI0_RXINTERVAL(val) bfin_write16(USB_EP_NI0_RXINTERVAL, val) - -/* USB Endbfin_read_()oint 1 Control Registers */ - -#define bfin_read_USB_EP_NI0_TXCOUNT() bfin_read16(USB_EP_NI0_TXCOUNT) -#define bfin_write_USB_EP_NI0_TXCOUNT(val) bfin_write16(USB_EP_NI0_TXCOUNT, val) -#define bfin_read_USB_EP_NI1_TXMAXP() bfin_read16(USB_EP_NI1_TXMAXP) -#define bfin_write_USB_EP_NI1_TXMAXP(val) bfin_write16(USB_EP_NI1_TXMAXP, val) -#define bfin_read_USB_EP_NI1_TXCSR() bfin_read16(USB_EP_NI1_TXCSR) -#define bfin_write_USB_EP_NI1_TXCSR(val) bfin_write16(USB_EP_NI1_TXCSR, val) -#define bfin_read_USB_EP_NI1_RXMAXP() bfin_read16(USB_EP_NI1_RXMAXP) -#define bfin_write_USB_EP_NI1_RXMAXP(val) bfin_write16(USB_EP_NI1_RXMAXP, val) -#define bfin_read_USB_EP_NI1_RXCSR() bfin_read16(USB_EP_NI1_RXCSR) -#define bfin_write_USB_EP_NI1_RXCSR(val) bfin_write16(USB_EP_NI1_RXCSR, val) -#define bfin_read_USB_EP_NI1_RXCOUNT() bfin_read16(USB_EP_NI1_RXCOUNT) -#define bfin_write_USB_EP_NI1_RXCOUNT(val) bfin_write16(USB_EP_NI1_RXCOUNT, val) -#define bfin_read_USB_EP_NI1_TXTYPE() bfin_read16(USB_EP_NI1_TXTYPE) -#define bfin_write_USB_EP_NI1_TXTYPE(val) bfin_write16(USB_EP_NI1_TXTYPE, val) -#define bfin_read_USB_EP_NI1_TXINTERVAL() bfin_read16(USB_EP_NI1_TXINTERVAL) -#define bfin_write_USB_EP_NI1_TXINTERVAL(val) bfin_write16(USB_EP_NI1_TXINTERVAL, val) -#define bfin_read_USB_EP_NI1_RXTYPE() bfin_read16(USB_EP_NI1_RXTYPE) -#define bfin_write_USB_EP_NI1_RXTYPE(val) bfin_write16(USB_EP_NI1_RXTYPE, val) -#define bfin_read_USB_EP_NI1_RXINTERVAL() bfin_read16(USB_EP_NI1_RXINTERVAL) -#define bfin_write_USB_EP_NI1_RXINTERVAL(val) bfin_write16(USB_EP_NI1_RXINTERVAL, val) - -/* USB Endbfin_read_()oint 2 Control Registers */ - -#define bfin_read_USB_EP_NI1_TXCOUNT() bfin_read16(USB_EP_NI1_TXCOUNT) -#define bfin_write_USB_EP_NI1_TXCOUNT(val) bfin_write16(USB_EP_NI1_TXCOUNT, val) -#define bfin_read_USB_EP_NI2_TXMAXP() bfin_read16(USB_EP_NI2_TXMAXP) -#define bfin_write_USB_EP_NI2_TXMAXP(val) bfin_write16(USB_EP_NI2_TXMAXP, val) -#define bfin_read_USB_EP_NI2_TXCSR() bfin_read16(USB_EP_NI2_TXCSR) -#define bfin_write_USB_EP_NI2_TXCSR(val) bfin_write16(USB_EP_NI2_TXCSR, val) -#define bfin_read_USB_EP_NI2_RXMAXP() bfin_read16(USB_EP_NI2_RXMAXP) -#define bfin_write_USB_EP_NI2_RXMAXP(val) bfin_write16(USB_EP_NI2_RXMAXP, val) -#define bfin_read_USB_EP_NI2_RXCSR() bfin_read16(USB_EP_NI2_RXCSR) -#define bfin_write_USB_EP_NI2_RXCSR(val) bfin_write16(USB_EP_NI2_RXCSR, val) -#define bfin_read_USB_EP_NI2_RXCOUNT() bfin_read16(USB_EP_NI2_RXCOUNT) -#define bfin_write_USB_EP_NI2_RXCOUNT(val) bfin_write16(USB_EP_NI2_RXCOUNT, val) -#define bfin_read_USB_EP_NI2_TXTYPE() bfin_read16(USB_EP_NI2_TXTYPE) -#define bfin_write_USB_EP_NI2_TXTYPE(val) bfin_write16(USB_EP_NI2_TXTYPE, val) -#define bfin_read_USB_EP_NI2_TXINTERVAL() bfin_read16(USB_EP_NI2_TXINTERVAL) -#define bfin_write_USB_EP_NI2_TXINTERVAL(val) bfin_write16(USB_EP_NI2_TXINTERVAL, val) -#define bfin_read_USB_EP_NI2_RXTYPE() bfin_read16(USB_EP_NI2_RXTYPE) -#define bfin_write_USB_EP_NI2_RXTYPE(val) bfin_write16(USB_EP_NI2_RXTYPE, val) -#define bfin_read_USB_EP_NI2_RXINTERVAL() bfin_read16(USB_EP_NI2_RXINTERVAL) -#define bfin_write_USB_EP_NI2_RXINTERVAL(val) bfin_write16(USB_EP_NI2_RXINTERVAL, val) - -/* USB Endbfin_read_()oint 3 Control Registers */ - -#define bfin_read_USB_EP_NI2_TXCOUNT() bfin_read16(USB_EP_NI2_TXCOUNT) -#define bfin_write_USB_EP_NI2_TXCOUNT(val) bfin_write16(USB_EP_NI2_TXCOUNT, val) -#define bfin_read_USB_EP_NI3_TXMAXP() bfin_read16(USB_EP_NI3_TXMAXP) -#define bfin_write_USB_EP_NI3_TXMAXP(val) bfin_write16(USB_EP_NI3_TXMAXP, val) -#define bfin_read_USB_EP_NI3_TXCSR() bfin_read16(USB_EP_NI3_TXCSR) -#define bfin_write_USB_EP_NI3_TXCSR(val) bfin_write16(USB_EP_NI3_TXCSR, val) -#define bfin_read_USB_EP_NI3_RXMAXP() bfin_read16(USB_EP_NI3_RXMAXP) -#define bfin_write_USB_EP_NI3_RXMAXP(val) bfin_write16(USB_EP_NI3_RXMAXP, val) -#define bfin_read_USB_EP_NI3_RXCSR() bfin_read16(USB_EP_NI3_RXCSR) -#define bfin_write_USB_EP_NI3_RXCSR(val) bfin_write16(USB_EP_NI3_RXCSR, val) -#define bfin_read_USB_EP_NI3_RXCOUNT() bfin_read16(USB_EP_NI3_RXCOUNT) -#define bfin_write_USB_EP_NI3_RXCOUNT(val) bfin_write16(USB_EP_NI3_RXCOUNT, val) -#define bfin_read_USB_EP_NI3_TXTYPE() bfin_read16(USB_EP_NI3_TXTYPE) -#define bfin_write_USB_EP_NI3_TXTYPE(val) bfin_write16(USB_EP_NI3_TXTYPE, val) -#define bfin_read_USB_EP_NI3_TXINTERVAL() bfin_read16(USB_EP_NI3_TXINTERVAL) -#define bfin_write_USB_EP_NI3_TXINTERVAL(val) bfin_write16(USB_EP_NI3_TXINTERVAL, val) -#define bfin_read_USB_EP_NI3_RXTYPE() bfin_read16(USB_EP_NI3_RXTYPE) -#define bfin_write_USB_EP_NI3_RXTYPE(val) bfin_write16(USB_EP_NI3_RXTYPE, val) -#define bfin_read_USB_EP_NI3_RXINTERVAL() bfin_read16(USB_EP_NI3_RXINTERVAL) -#define bfin_write_USB_EP_NI3_RXINTERVAL(val) bfin_write16(USB_EP_NI3_RXINTERVAL, val) - -/* USB Endbfin_read_()oint 4 Control Registers */ - -#define bfin_read_USB_EP_NI3_TXCOUNT() bfin_read16(USB_EP_NI3_TXCOUNT) -#define bfin_write_USB_EP_NI3_TXCOUNT(val) bfin_write16(USB_EP_NI3_TXCOUNT, val) -#define bfin_read_USB_EP_NI4_TXMAXP() bfin_read16(USB_EP_NI4_TXMAXP) -#define bfin_write_USB_EP_NI4_TXMAXP(val) bfin_write16(USB_EP_NI4_TXMAXP, val) -#define bfin_read_USB_EP_NI4_TXCSR() bfin_read16(USB_EP_NI4_TXCSR) -#define bfin_write_USB_EP_NI4_TXCSR(val) bfin_write16(USB_EP_NI4_TXCSR, val) -#define bfin_read_USB_EP_NI4_RXMAXP() bfin_read16(USB_EP_NI4_RXMAXP) -#define bfin_write_USB_EP_NI4_RXMAXP(val) bfin_write16(USB_EP_NI4_RXMAXP, val) -#define bfin_read_USB_EP_NI4_RXCSR() bfin_read16(USB_EP_NI4_RXCSR) -#define bfin_write_USB_EP_NI4_RXCSR(val) bfin_write16(USB_EP_NI4_RXCSR, val) -#define bfin_read_USB_EP_NI4_RXCOUNT() bfin_read16(USB_EP_NI4_RXCOUNT) -#define bfin_write_USB_EP_NI4_RXCOUNT(val) bfin_write16(USB_EP_NI4_RXCOUNT, val) -#define bfin_read_USB_EP_NI4_TXTYPE() bfin_read16(USB_EP_NI4_TXTYPE) -#define bfin_write_USB_EP_NI4_TXTYPE(val) bfin_write16(USB_EP_NI4_TXTYPE, val) -#define bfin_read_USB_EP_NI4_TXINTERVAL() bfin_read16(USB_EP_NI4_TXINTERVAL) -#define bfin_write_USB_EP_NI4_TXINTERVAL(val) bfin_write16(USB_EP_NI4_TXINTERVAL, val) -#define bfin_read_USB_EP_NI4_RXTYPE() bfin_read16(USB_EP_NI4_RXTYPE) -#define bfin_write_USB_EP_NI4_RXTYPE(val) bfin_write16(USB_EP_NI4_RXTYPE, val) -#define bfin_read_USB_EP_NI4_RXINTERVAL() bfin_read16(USB_EP_NI4_RXINTERVAL) -#define bfin_write_USB_EP_NI4_RXINTERVAL(val) bfin_write16(USB_EP_NI4_RXINTERVAL, val) - -/* USB Endbfin_read_()oint 5 Control Registers */ - -#define bfin_read_USB_EP_NI4_TXCOUNT() bfin_read16(USB_EP_NI4_TXCOUNT) -#define bfin_write_USB_EP_NI4_TXCOUNT(val) bfin_write16(USB_EP_NI4_TXCOUNT, val) -#define bfin_read_USB_EP_NI5_TXMAXP() bfin_read16(USB_EP_NI5_TXMAXP) -#define bfin_write_USB_EP_NI5_TXMAXP(val) bfin_write16(USB_EP_NI5_TXMAXP, val) -#define bfin_read_USB_EP_NI5_TXCSR() bfin_read16(USB_EP_NI5_TXCSR) -#define bfin_write_USB_EP_NI5_TXCSR(val) bfin_write16(USB_EP_NI5_TXCSR, val) -#define bfin_read_USB_EP_NI5_RXMAXP() bfin_read16(USB_EP_NI5_RXMAXP) -#define bfin_write_USB_EP_NI5_RXMAXP(val) bfin_write16(USB_EP_NI5_RXMAXP, val) -#define bfin_read_USB_EP_NI5_RXCSR() bfin_read16(USB_EP_NI5_RXCSR) -#define bfin_write_USB_EP_NI5_RXCSR(val) bfin_write16(USB_EP_NI5_RXCSR, val) -#define bfin_read_USB_EP_NI5_RXCOUNT() bfin_read16(USB_EP_NI5_RXCOUNT) -#define bfin_write_USB_EP_NI5_RXCOUNT(val) bfin_write16(USB_EP_NI5_RXCOUNT, val) -#define bfin_read_USB_EP_NI5_TXTYPE() bfin_read16(USB_EP_NI5_TXTYPE) -#define bfin_write_USB_EP_NI5_TXTYPE(val) bfin_write16(USB_EP_NI5_TXTYPE, val) -#define bfin_read_USB_EP_NI5_TXINTERVAL() bfin_read16(USB_EP_NI5_TXINTERVAL) -#define bfin_write_USB_EP_NI5_TXINTERVAL(val) bfin_write16(USB_EP_NI5_TXINTERVAL, val) -#define bfin_read_USB_EP_NI5_RXTYPE() bfin_read16(USB_EP_NI5_RXTYPE) -#define bfin_write_USB_EP_NI5_RXTYPE(val) bfin_write16(USB_EP_NI5_RXTYPE, val) -#define bfin_read_USB_EP_NI5_RXINTERVAL() bfin_read16(USB_EP_NI5_RXINTERVAL) -#define bfin_write_USB_EP_NI5_RXINTERVAL(val) bfin_write16(USB_EP_NI5_RXINTERVAL, val) - -/* USB Endbfin_read_()oint 6 Control Registers */ - -#define bfin_read_USB_EP_NI5_TXCOUNT() bfin_read16(USB_EP_NI5_TXCOUNT) -#define bfin_write_USB_EP_NI5_TXCOUNT(val) bfin_write16(USB_EP_NI5_TXCOUNT, val) -#define bfin_read_USB_EP_NI6_TXMAXP() bfin_read16(USB_EP_NI6_TXMAXP) -#define bfin_write_USB_EP_NI6_TXMAXP(val) bfin_write16(USB_EP_NI6_TXMAXP, val) -#define bfin_read_USB_EP_NI6_TXCSR() bfin_read16(USB_EP_NI6_TXCSR) -#define bfin_write_USB_EP_NI6_TXCSR(val) bfin_write16(USB_EP_NI6_TXCSR, val) -#define bfin_read_USB_EP_NI6_RXMAXP() bfin_read16(USB_EP_NI6_RXMAXP) -#define bfin_write_USB_EP_NI6_RXMAXP(val) bfin_write16(USB_EP_NI6_RXMAXP, val) -#define bfin_read_USB_EP_NI6_RXCSR() bfin_read16(USB_EP_NI6_RXCSR) -#define bfin_write_USB_EP_NI6_RXCSR(val) bfin_write16(USB_EP_NI6_RXCSR, val) -#define bfin_read_USB_EP_NI6_RXCOUNT() bfin_read16(USB_EP_NI6_RXCOUNT) -#define bfin_write_USB_EP_NI6_RXCOUNT(val) bfin_write16(USB_EP_NI6_RXCOUNT, val) -#define bfin_read_USB_EP_NI6_TXTYPE() bfin_read16(USB_EP_NI6_TXTYPE) -#define bfin_write_USB_EP_NI6_TXTYPE(val) bfin_write16(USB_EP_NI6_TXTYPE, val) -#define bfin_read_USB_EP_NI6_TXINTERVAL() bfin_read16(USB_EP_NI6_TXINTERVAL) -#define bfin_write_USB_EP_NI6_TXINTERVAL(val) bfin_write16(USB_EP_NI6_TXINTERVAL, val) -#define bfin_read_USB_EP_NI6_RXTYPE() bfin_read16(USB_EP_NI6_RXTYPE) -#define bfin_write_USB_EP_NI6_RXTYPE(val) bfin_write16(USB_EP_NI6_RXTYPE, val) -#define bfin_read_USB_EP_NI6_RXINTERVAL() bfin_read16(USB_EP_NI6_RXINTERVAL) -#define bfin_write_USB_EP_NI6_RXINTERVAL(val) bfin_write16(USB_EP_NI6_RXINTERVAL, val) - -/* USB Endbfin_read_()oint 7 Control Registers */ - -#define bfin_read_USB_EP_NI6_TXCOUNT() bfin_read16(USB_EP_NI6_TXCOUNT) -#define bfin_write_USB_EP_NI6_TXCOUNT(val) bfin_write16(USB_EP_NI6_TXCOUNT, val) -#define bfin_read_USB_EP_NI7_TXMAXP() bfin_read16(USB_EP_NI7_TXMAXP) -#define bfin_write_USB_EP_NI7_TXMAXP(val) bfin_write16(USB_EP_NI7_TXMAXP, val) -#define bfin_read_USB_EP_NI7_TXCSR() bfin_read16(USB_EP_NI7_TXCSR) -#define bfin_write_USB_EP_NI7_TXCSR(val) bfin_write16(USB_EP_NI7_TXCSR, val) -#define bfin_read_USB_EP_NI7_RXMAXP() bfin_read16(USB_EP_NI7_RXMAXP) -#define bfin_write_USB_EP_NI7_RXMAXP(val) bfin_write16(USB_EP_NI7_RXMAXP, val) -#define bfin_read_USB_EP_NI7_RXCSR() bfin_read16(USB_EP_NI7_RXCSR) -#define bfin_write_USB_EP_NI7_RXCSR(val) bfin_write16(USB_EP_NI7_RXCSR, val) -#define bfin_read_USB_EP_NI7_RXCOUNT() bfin_read16(USB_EP_NI7_RXCOUNT) -#define bfin_write_USB_EP_NI7_RXCOUNT(val) bfin_write16(USB_EP_NI7_RXCOUNT, val) -#define bfin_read_USB_EP_NI7_TXTYPE() bfin_read16(USB_EP_NI7_TXTYPE) -#define bfin_write_USB_EP_NI7_TXTYPE(val) bfin_write16(USB_EP_NI7_TXTYPE, val) -#define bfin_read_USB_EP_NI7_TXINTERVAL() bfin_read16(USB_EP_NI7_TXINTERVAL) -#define bfin_write_USB_EP_NI7_TXINTERVAL(val) bfin_write16(USB_EP_NI7_TXINTERVAL, val) -#define bfin_read_USB_EP_NI7_RXTYPE() bfin_read16(USB_EP_NI7_RXTYPE) -#define bfin_write_USB_EP_NI7_RXTYPE(val) bfin_write16(USB_EP_NI7_RXTYPE, val) -#define bfin_read_USB_EP_NI7_RXINTERVAL() bfin_read16(USB_EP_NI7_RXINTERVAL) -#define bfin_write_USB_EP_NI7_RXINTERVAL(val) bfin_write16(USB_EP_NI7_RXINTERVAL, val) -#define bfin_read_USB_EP_NI7_TXCOUNT() bfin_read16(USB_EP_NI7_TXCOUNT) -#define bfin_write_USB_EP_NI7_TXCOUNT(val) bfin_write16(USB_EP_NI7_TXCOUNT, val) -#define bfin_read_USB_DMA_INTERRUPT() bfin_read16(USB_DMA_INTERRUPT) -#define bfin_write_USB_DMA_INTERRUPT(val) bfin_write16(USB_DMA_INTERRUPT, val) - -/* USB Channel 0 Config Registers */ - -#define bfin_read_USB_DMA0CONTROL() bfin_read16(USB_DMA0CONTROL) -#define bfin_write_USB_DMA0CONTROL(val) bfin_write16(USB_DMA0CONTROL, val) -#define bfin_read_USB_DMA0ADDRLOW() bfin_read16(USB_DMA0ADDRLOW) -#define bfin_write_USB_DMA0ADDRLOW(val) bfin_write16(USB_DMA0ADDRLOW, val) -#define bfin_read_USB_DMA0ADDRHIGH() bfin_read16(USB_DMA0ADDRHIGH) -#define bfin_write_USB_DMA0ADDRHIGH(val) bfin_write16(USB_DMA0ADDRHIGH, val) -#define bfin_read_USB_DMA0COUNTLOW() bfin_read16(USB_DMA0COUNTLOW) -#define bfin_write_USB_DMA0COUNTLOW(val) bfin_write16(USB_DMA0COUNTLOW, val) -#define bfin_read_USB_DMA0COUNTHIGH() bfin_read16(USB_DMA0COUNTHIGH) -#define bfin_write_USB_DMA0COUNTHIGH(val) bfin_write16(USB_DMA0COUNTHIGH, val) - -/* USB Channel 1 Config Registers */ - -#define bfin_read_USB_DMA1CONTROL() bfin_read16(USB_DMA1CONTROL) -#define bfin_write_USB_DMA1CONTROL(val) bfin_write16(USB_DMA1CONTROL, val) -#define bfin_read_USB_DMA1ADDRLOW() bfin_read16(USB_DMA1ADDRLOW) -#define bfin_write_USB_DMA1ADDRLOW(val) bfin_write16(USB_DMA1ADDRLOW, val) -#define bfin_read_USB_DMA1ADDRHIGH() bfin_read16(USB_DMA1ADDRHIGH) -#define bfin_write_USB_DMA1ADDRHIGH(val) bfin_write16(USB_DMA1ADDRHIGH, val) -#define bfin_read_USB_DMA1COUNTLOW() bfin_read16(USB_DMA1COUNTLOW) -#define bfin_write_USB_DMA1COUNTLOW(val) bfin_write16(USB_DMA1COUNTLOW, val) -#define bfin_read_USB_DMA1COUNTHIGH() bfin_read16(USB_DMA1COUNTHIGH) -#define bfin_write_USB_DMA1COUNTHIGH(val) bfin_write16(USB_DMA1COUNTHIGH, val) - -/* USB Channel 2 Config Registers */ - -#define bfin_read_USB_DMA2CONTROL() bfin_read16(USB_DMA2CONTROL) -#define bfin_write_USB_DMA2CONTROL(val) bfin_write16(USB_DMA2CONTROL, val) -#define bfin_read_USB_DMA2ADDRLOW() bfin_read16(USB_DMA2ADDRLOW) -#define bfin_write_USB_DMA2ADDRLOW(val) bfin_write16(USB_DMA2ADDRLOW, val) -#define bfin_read_USB_DMA2ADDRHIGH() bfin_read16(USB_DMA2ADDRHIGH) -#define bfin_write_USB_DMA2ADDRHIGH(val) bfin_write16(USB_DMA2ADDRHIGH, val) -#define bfin_read_USB_DMA2COUNTLOW() bfin_read16(USB_DMA2COUNTLOW) -#define bfin_write_USB_DMA2COUNTLOW(val) bfin_write16(USB_DMA2COUNTLOW, val) -#define bfin_read_USB_DMA2COUNTHIGH() bfin_read16(USB_DMA2COUNTHIGH) -#define bfin_write_USB_DMA2COUNTHIGH(val) bfin_write16(USB_DMA2COUNTHIGH, val) - -/* USB Channel 3 Config Registers */ - -#define bfin_read_USB_DMA3CONTROL() bfin_read16(USB_DMA3CONTROL) -#define bfin_write_USB_DMA3CONTROL(val) bfin_write16(USB_DMA3CONTROL, val) -#define bfin_read_USB_DMA3ADDRLOW() bfin_read16(USB_DMA3ADDRLOW) -#define bfin_write_USB_DMA3ADDRLOW(val) bfin_write16(USB_DMA3ADDRLOW, val) -#define bfin_read_USB_DMA3ADDRHIGH() bfin_read16(USB_DMA3ADDRHIGH) -#define bfin_write_USB_DMA3ADDRHIGH(val) bfin_write16(USB_DMA3ADDRHIGH, val) -#define bfin_read_USB_DMA3COUNTLOW() bfin_read16(USB_DMA3COUNTLOW) -#define bfin_write_USB_DMA3COUNTLOW(val) bfin_write16(USB_DMA3COUNTLOW, val) -#define bfin_read_USB_DMA3COUNTHIGH() bfin_read16(USB_DMA3COUNTHIGH) -#define bfin_write_USB_DMA3COUNTHIGH(val) bfin_write16(USB_DMA3COUNTHIGH, val) - -/* USB Channel 4 Config Registers */ - -#define bfin_read_USB_DMA4CONTROL() bfin_read16(USB_DMA4CONTROL) -#define bfin_write_USB_DMA4CONTROL(val) bfin_write16(USB_DMA4CONTROL, val) -#define bfin_read_USB_DMA4ADDRLOW() bfin_read16(USB_DMA4ADDRLOW) -#define bfin_write_USB_DMA4ADDRLOW(val) bfin_write16(USB_DMA4ADDRLOW, val) -#define bfin_read_USB_DMA4ADDRHIGH() bfin_read16(USB_DMA4ADDRHIGH) -#define bfin_write_USB_DMA4ADDRHIGH(val) bfin_write16(USB_DMA4ADDRHIGH, val) -#define bfin_read_USB_DMA4COUNTLOW() bfin_read16(USB_DMA4COUNTLOW) -#define bfin_write_USB_DMA4COUNTLOW(val) bfin_write16(USB_DMA4COUNTLOW, val) -#define bfin_read_USB_DMA4COUNTHIGH() bfin_read16(USB_DMA4COUNTHIGH) -#define bfin_write_USB_DMA4COUNTHIGH(val) bfin_write16(USB_DMA4COUNTHIGH, val) - -/* USB Channel 5 Config Registers */ - -#define bfin_read_USB_DMA5CONTROL() bfin_read16(USB_DMA5CONTROL) -#define bfin_write_USB_DMA5CONTROL(val) bfin_write16(USB_DMA5CONTROL, val) -#define bfin_read_USB_DMA5ADDRLOW() bfin_read16(USB_DMA5ADDRLOW) -#define bfin_write_USB_DMA5ADDRLOW(val) bfin_write16(USB_DMA5ADDRLOW, val) -#define bfin_read_USB_DMA5ADDRHIGH() bfin_read16(USB_DMA5ADDRHIGH) -#define bfin_write_USB_DMA5ADDRHIGH(val) bfin_write16(USB_DMA5ADDRHIGH, val) -#define bfin_read_USB_DMA5COUNTLOW() bfin_read16(USB_DMA5COUNTLOW) -#define bfin_write_USB_DMA5COUNTLOW(val) bfin_write16(USB_DMA5COUNTLOW, val) -#define bfin_read_USB_DMA5COUNTHIGH() bfin_read16(USB_DMA5COUNTHIGH) -#define bfin_write_USB_DMA5COUNTHIGH(val) bfin_write16(USB_DMA5COUNTHIGH, val) - -/* USB Channel 6 Config Registers */ - -#define bfin_read_USB_DMA6CONTROL() bfin_read16(USB_DMA6CONTROL) -#define bfin_write_USB_DMA6CONTROL(val) bfin_write16(USB_DMA6CONTROL, val) -#define bfin_read_USB_DMA6ADDRLOW() bfin_read16(USB_DMA6ADDRLOW) -#define bfin_write_USB_DMA6ADDRLOW(val) bfin_write16(USB_DMA6ADDRLOW, val) -#define bfin_read_USB_DMA6ADDRHIGH() bfin_read16(USB_DMA6ADDRHIGH) -#define bfin_write_USB_DMA6ADDRHIGH(val) bfin_write16(USB_DMA6ADDRHIGH, val) -#define bfin_read_USB_DMA6COUNTLOW() bfin_read16(USB_DMA6COUNTLOW) -#define bfin_write_USB_DMA6COUNTLOW(val) bfin_write16(USB_DMA6COUNTLOW, val) -#define bfin_read_USB_DMA6COUNTHIGH() bfin_read16(USB_DMA6COUNTHIGH) -#define bfin_write_USB_DMA6COUNTHIGH(val) bfin_write16(USB_DMA6COUNTHIGH, val) - -/* USB Channel 7 Config Registers */ - -#define bfin_read_USB_DMA7CONTROL() bfin_read16(USB_DMA7CONTROL) -#define bfin_write_USB_DMA7CONTROL(val) bfin_write16(USB_DMA7CONTROL, val) -#define bfin_read_USB_DMA7ADDRLOW() bfin_read16(USB_DMA7ADDRLOW) -#define bfin_write_USB_DMA7ADDRLOW(val) bfin_write16(USB_DMA7ADDRLOW, val) -#define bfin_read_USB_DMA7ADDRHIGH() bfin_read16(USB_DMA7ADDRHIGH) -#define bfin_write_USB_DMA7ADDRHIGH(val) bfin_write16(USB_DMA7ADDRHIGH, val) -#define bfin_read_USB_DMA7COUNTLOW() bfin_read16(USB_DMA7COUNTLOW) -#define bfin_write_USB_DMA7COUNTLOW(val) bfin_write16(USB_DMA7COUNTLOW, val) -#define bfin_read_USB_DMA7COUNTHIGH() bfin_read16(USB_DMA7COUNTHIGH) -#define bfin_write_USB_DMA7COUNTHIGH(val) bfin_write16(USB_DMA7COUNTHIGH, val) - -/* Keybfin_read_()ad Registers */ - -#define bfin_read_KPAD_CTL() bfin_read16(KPAD_CTL) -#define bfin_write_KPAD_CTL(val) bfin_write16(KPAD_CTL, val) -#define bfin_read_KPAD_PRESCALE() bfin_read16(KPAD_PRESCALE) -#define bfin_write_KPAD_PRESCALE(val) bfin_write16(KPAD_PRESCALE, val) -#define bfin_read_KPAD_MSEL() bfin_read16(KPAD_MSEL) -#define bfin_write_KPAD_MSEL(val) bfin_write16(KPAD_MSEL, val) -#define bfin_read_KPAD_ROWCOL() bfin_read16(KPAD_ROWCOL) -#define bfin_write_KPAD_ROWCOL(val) bfin_write16(KPAD_ROWCOL, val) -#define bfin_read_KPAD_STAT() bfin_read16(KPAD_STAT) -#define bfin_write_KPAD_STAT(val) bfin_write16(KPAD_STAT, val) -#define bfin_read_KPAD_SOFTEVAL() bfin_read16(KPAD_SOFTEVAL) -#define bfin_write_KPAD_SOFTEVAL(val) bfin_write16(KPAD_SOFTEVAL, val) - -/* Pixel Combfin_read_()ositor (PIXC) Registers */ - -#define bfin_read_PIXC_CTL() bfin_read16(PIXC_CTL) -#define bfin_write_PIXC_CTL(val) bfin_write16(PIXC_CTL, val) -#define bfin_read_PIXC_PPL() bfin_read16(PIXC_PPL) -#define bfin_write_PIXC_PPL(val) bfin_write16(PIXC_PPL, val) -#define bfin_read_PIXC_LPF() bfin_read16(PIXC_LPF) -#define bfin_write_PIXC_LPF(val) bfin_write16(PIXC_LPF, val) -#define bfin_read_PIXC_AHSTART() bfin_read16(PIXC_AHSTART) -#define bfin_write_PIXC_AHSTART(val) bfin_write16(PIXC_AHSTART, val) -#define bfin_read_PIXC_AHEND() bfin_read16(PIXC_AHEND) -#define bfin_write_PIXC_AHEND(val) bfin_write16(PIXC_AHEND, val) -#define bfin_read_PIXC_AVSTART() bfin_read16(PIXC_AVSTART) -#define bfin_write_PIXC_AVSTART(val) bfin_write16(PIXC_AVSTART, val) -#define bfin_read_PIXC_AVEND() bfin_read16(PIXC_AVEND) -#define bfin_write_PIXC_AVEND(val) bfin_write16(PIXC_AVEND, val) -#define bfin_read_PIXC_ATRANSP() bfin_read16(PIXC_ATRANSP) -#define bfin_write_PIXC_ATRANSP(val) bfin_write16(PIXC_ATRANSP, val) -#define bfin_read_PIXC_BHSTART() bfin_read16(PIXC_BHSTART) -#define bfin_write_PIXC_BHSTART(val) bfin_write16(PIXC_BHSTART, val) -#define bfin_read_PIXC_BHEND() bfin_read16(PIXC_BHEND) -#define bfin_write_PIXC_BHEND(val) bfin_write16(PIXC_BHEND, val) -#define bfin_read_PIXC_BVSTART() bfin_read16(PIXC_BVSTART) -#define bfin_write_PIXC_BVSTART(val) bfin_write16(PIXC_BVSTART, val) -#define bfin_read_PIXC_BVEND() bfin_read16(PIXC_BVEND) -#define bfin_write_PIXC_BVEND(val) bfin_write16(PIXC_BVEND, val) -#define bfin_read_PIXC_BTRANSP() bfin_read16(PIXC_BTRANSP) -#define bfin_write_PIXC_BTRANSP(val) bfin_write16(PIXC_BTRANSP, val) -#define bfin_read_PIXC_INTRSTAT() bfin_read16(PIXC_INTRSTAT) -#define bfin_write_PIXC_INTRSTAT(val) bfin_write16(PIXC_INTRSTAT, val) -#define bfin_read_PIXC_RYCON() bfin_read32(PIXC_RYCON) -#define bfin_write_PIXC_RYCON(val) bfin_write32(PIXC_RYCON, val) -#define bfin_read_PIXC_GUCON() bfin_read32(PIXC_GUCON) -#define bfin_write_PIXC_GUCON(val) bfin_write32(PIXC_GUCON, val) -#define bfin_read_PIXC_BVCON() bfin_read32(PIXC_BVCON) -#define bfin_write_PIXC_BVCON(val) bfin_write32(PIXC_BVCON, val) -#define bfin_read_PIXC_CCBIAS() bfin_read32(PIXC_CCBIAS) -#define bfin_write_PIXC_CCBIAS(val) bfin_write32(PIXC_CCBIAS, val) -#define bfin_read_PIXC_TC() bfin_read32(PIXC_TC) -#define bfin_write_PIXC_TC(val) bfin_write32(PIXC_TC, val) - -/* Handshake MDMA 0 Registers */ - -#define bfin_read_HMDMA0_CONTROL() bfin_read16(HMDMA0_CONTROL) -#define bfin_write_HMDMA0_CONTROL(val) bfin_write16(HMDMA0_CONTROL, val) -#define bfin_read_HMDMA0_ECINIT() bfin_read16(HMDMA0_ECINIT) -#define bfin_write_HMDMA0_ECINIT(val) bfin_write16(HMDMA0_ECINIT, val) -#define bfin_read_HMDMA0_BCINIT() bfin_read16(HMDMA0_BCINIT) -#define bfin_write_HMDMA0_BCINIT(val) bfin_write16(HMDMA0_BCINIT, val) -#define bfin_read_HMDMA0_ECURGENT() bfin_read16(HMDMA0_ECURGENT) -#define bfin_write_HMDMA0_ECURGENT(val) bfin_write16(HMDMA0_ECURGENT, val) -#define bfin_read_HMDMA0_ECOVERFLOW() bfin_read16(HMDMA0_ECOVERFLOW) -#define bfin_write_HMDMA0_ECOVERFLOW(val) bfin_write16(HMDMA0_ECOVERFLOW, val) -#define bfin_read_HMDMA0_ECOUNT() bfin_read16(HMDMA0_ECOUNT) -#define bfin_write_HMDMA0_ECOUNT(val) bfin_write16(HMDMA0_ECOUNT, val) -#define bfin_read_HMDMA0_BCOUNT() bfin_read16(HMDMA0_BCOUNT) -#define bfin_write_HMDMA0_BCOUNT(val) bfin_write16(HMDMA0_BCOUNT, val) - -/* Handshake MDMA 1 Registers */ - -#define bfin_read_HMDMA1_CONTROL() bfin_read16(HMDMA1_CONTROL) -#define bfin_write_HMDMA1_CONTROL(val) bfin_write16(HMDMA1_CONTROL, val) -#define bfin_read_HMDMA1_ECINIT() bfin_read16(HMDMA1_ECINIT) -#define bfin_write_HMDMA1_ECINIT(val) bfin_write16(HMDMA1_ECINIT, val) -#define bfin_read_HMDMA1_BCINIT() bfin_read16(HMDMA1_BCINIT) -#define bfin_write_HMDMA1_BCINIT(val) bfin_write16(HMDMA1_BCINIT, val) -#define bfin_read_HMDMA1_ECURGENT() bfin_read16(HMDMA1_ECURGENT) -#define bfin_write_HMDMA1_ECURGENT(val) bfin_write16(HMDMA1_ECURGENT, val) -#define bfin_read_HMDMA1_ECOVERFLOW() bfin_read16(HMDMA1_ECOVERFLOW) -#define bfin_write_HMDMA1_ECOVERFLOW(val) bfin_write16(HMDMA1_ECOVERFLOW, val) -#define bfin_read_HMDMA1_ECOUNT() bfin_read16(HMDMA1_ECOUNT) -#define bfin_write_HMDMA1_ECOUNT(val) bfin_write16(HMDMA1_ECOUNT, val) -#define bfin_read_HMDMA1_BCOUNT() bfin_read16(HMDMA1_BCOUNT) -#define bfin_write_HMDMA1_BCOUNT(val) bfin_write16(HMDMA1_BCOUNT, val) - #endif /* _CDEF_BF548_H */ diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF549.h b/arch/blackfin/mach-bf548/include/mach/cdefBF549.h index 34c84c7..80201ed 100644 --- a/arch/blackfin/mach-bf548/include/mach/cdefBF549.h +++ b/arch/blackfin/mach-bf548/include/mach/cdefBF549.h @@ -18,165 +18,8 @@ /* include cdefBF54x_base.h for the set of #defines that are common to all ADSP-BF54x bfin_read_()rocessors */ #include "cdefBF54x_base.h" -/* The following are the #defines needed by ADSP-BF549 that are not in the common header */ - -/* Timer Registers */ - -#define bfin_read_TIMER8_CONFIG() bfin_read16(TIMER8_CONFIG) -#define bfin_write_TIMER8_CONFIG(val) bfin_write16(TIMER8_CONFIG, val) -#define bfin_read_TIMER8_COUNTER() bfin_read32(TIMER8_COUNTER) -#define bfin_write_TIMER8_COUNTER(val) bfin_write32(TIMER8_COUNTER, val) -#define bfin_read_TIMER8_PERIOD() bfin_read32(TIMER8_PERIOD) -#define bfin_write_TIMER8_PERIOD(val) bfin_write32(TIMER8_PERIOD, val) -#define bfin_read_TIMER8_WIDTH() bfin_read32(TIMER8_WIDTH) -#define bfin_write_TIMER8_WIDTH(val) bfin_write32(TIMER8_WIDTH, val) -#define bfin_read_TIMER9_CONFIG() bfin_read16(TIMER9_CONFIG) -#define bfin_write_TIMER9_CONFIG(val) bfin_write16(TIMER9_CONFIG, val) -#define bfin_read_TIMER9_COUNTER() bfin_read32(TIMER9_COUNTER) -#define bfin_write_TIMER9_COUNTER(val) bfin_write32(TIMER9_COUNTER, val) -#define bfin_read_TIMER9_PERIOD() bfin_read32(TIMER9_PERIOD) -#define bfin_write_TIMER9_PERIOD(val) bfin_write32(TIMER9_PERIOD, val) -#define bfin_read_TIMER9_WIDTH() bfin_read32(TIMER9_WIDTH) -#define bfin_write_TIMER9_WIDTH(val) bfin_write32(TIMER9_WIDTH, val) -#define bfin_read_TIMER10_CONFIG() bfin_read16(TIMER10_CONFIG) -#define bfin_write_TIMER10_CONFIG(val) bfin_write16(TIMER10_CONFIG, val) -#define bfin_read_TIMER10_COUNTER() bfin_read32(TIMER10_COUNTER) -#define bfin_write_TIMER10_COUNTER(val) bfin_write32(TIMER10_COUNTER, val) -#define bfin_read_TIMER10_PERIOD() bfin_read32(TIMER10_PERIOD) -#define bfin_write_TIMER10_PERIOD(val) bfin_write32(TIMER10_PERIOD, val) -#define bfin_read_TIMER10_WIDTH() bfin_read32(TIMER10_WIDTH) -#define bfin_write_TIMER10_WIDTH(val) bfin_write32(TIMER10_WIDTH, val) - -/* Timer Groubfin_read_() of 3 */ - -#define bfin_read_TIMER_ENABLE1() bfin_read16(TIMER_ENABLE1) -#define bfin_write_TIMER_ENABLE1(val) bfin_write16(TIMER_ENABLE1, val) -#define bfin_read_TIMER_DISABLE1() bfin_read16(TIMER_DISABLE1) -#define bfin_write_TIMER_DISABLE1(val) bfin_write16(TIMER_DISABLE1, val) -#define bfin_read_TIMER_STATUS1() bfin_read32(TIMER_STATUS1) -#define bfin_write_TIMER_STATUS1(val) bfin_write32(TIMER_STATUS1, val) - -/* SPORT0 Registers */ - -#define bfin_read_SPORT0_TCR1() bfin_read16(SPORT0_TCR1) -#define bfin_write_SPORT0_TCR1(val) bfin_write16(SPORT0_TCR1, val) -#define bfin_read_SPORT0_TCR2() bfin_read16(SPORT0_TCR2) -#define bfin_write_SPORT0_TCR2(val) bfin_write16(SPORT0_TCR2, val) -#define bfin_read_SPORT0_TCLKDIV() bfin_read16(SPORT0_TCLKDIV) -#define bfin_write_SPORT0_TCLKDIV(val) bfin_write16(SPORT0_TCLKDIV, val) -#define bfin_read_SPORT0_TFSDIV() bfin_read16(SPORT0_TFSDIV) -#define bfin_write_SPORT0_TFSDIV(val) bfin_write16(SPORT0_TFSDIV, val) -#define bfin_read_SPORT0_TX() bfin_read32(SPORT0_TX) -#define bfin_write_SPORT0_TX(val) bfin_write32(SPORT0_TX, val) -#define bfin_read_SPORT0_RX() bfin_read32(SPORT0_RX) -#define bfin_write_SPORT0_RX(val) bfin_write32(SPORT0_RX, val) -#define bfin_read_SPORT0_RCR1() bfin_read16(SPORT0_RCR1) -#define bfin_write_SPORT0_RCR1(val) bfin_write16(SPORT0_RCR1, val) -#define bfin_read_SPORT0_RCR2() bfin_read16(SPORT0_RCR2) -#define bfin_write_SPORT0_RCR2(val) bfin_write16(SPORT0_RCR2, val) -#define bfin_read_SPORT0_RCLKDIV() bfin_read16(SPORT0_RCLKDIV) -#define bfin_write_SPORT0_RCLKDIV(val) bfin_write16(SPORT0_RCLKDIV, val) -#define bfin_read_SPORT0_RFSDIV() bfin_read16(SPORT0_RFSDIV) -#define bfin_write_SPORT0_RFSDIV(val) bfin_write16(SPORT0_RFSDIV, val) -#define bfin_read_SPORT0_STAT() bfin_read16(SPORT0_STAT) -#define bfin_write_SPORT0_STAT(val) bfin_write16(SPORT0_STAT, val) -#define bfin_read_SPORT0_CHNL() bfin_read16(SPORT0_CHNL) -#define bfin_write_SPORT0_CHNL(val) bfin_write16(SPORT0_CHNL, val) -#define bfin_read_SPORT0_MCMC1() bfin_read16(SPORT0_MCMC1) -#define bfin_write_SPORT0_MCMC1(val) bfin_write16(SPORT0_MCMC1, val) -#define bfin_read_SPORT0_MCMC2() bfin_read16(SPORT0_MCMC2) -#define bfin_write_SPORT0_MCMC2(val) bfin_write16(SPORT0_MCMC2, val) -#define bfin_read_SPORT0_MTCS0() bfin_read32(SPORT0_MTCS0) -#define bfin_write_SPORT0_MTCS0(val) bfin_write32(SPORT0_MTCS0, val) -#define bfin_read_SPORT0_MTCS1() bfin_read32(SPORT0_MTCS1) -#define bfin_write_SPORT0_MTCS1(val) bfin_write32(SPORT0_MTCS1, val) -#define bfin_read_SPORT0_MTCS2() bfin_read32(SPORT0_MTCS2) -#define bfin_write_SPORT0_MTCS2(val) bfin_write32(SPORT0_MTCS2, val) -#define bfin_read_SPORT0_MTCS3() bfin_read32(SPORT0_MTCS3) -#define bfin_write_SPORT0_MTCS3(val) bfin_write32(SPORT0_MTCS3, val) -#define bfin_read_SPORT0_MRCS0() bfin_read32(SPORT0_MRCS0) -#define bfin_write_SPORT0_MRCS0(val) bfin_write32(SPORT0_MRCS0, val) -#define bfin_read_SPORT0_MRCS1() bfin_read32(SPORT0_MRCS1) -#define bfin_write_SPORT0_MRCS1(val) bfin_write32(SPORT0_MRCS1, val) -#define bfin_read_SPORT0_MRCS2() bfin_read32(SPORT0_MRCS2) -#define bfin_write_SPORT0_MRCS2(val) bfin_write32(SPORT0_MRCS2, val) -#define bfin_read_SPORT0_MRCS3() bfin_read32(SPORT0_MRCS3) -#define bfin_write_SPORT0_MRCS3(val) bfin_write32(SPORT0_MRCS3, val) - -/* EPPI0 Registers */ - -#define bfin_read_EPPI0_STATUS() bfin_read16(EPPI0_STATUS) -#define bfin_write_EPPI0_STATUS(val) bfin_write16(EPPI0_STATUS, val) -#define bfin_read_EPPI0_HCOUNT() bfin_read16(EPPI0_HCOUNT) -#define bfin_write_EPPI0_HCOUNT(val) bfin_write16(EPPI0_HCOUNT, val) -#define bfin_read_EPPI0_HDELAY() bfin_read16(EPPI0_HDELAY) -#define bfin_write_EPPI0_HDELAY(val) bfin_write16(EPPI0_HDELAY, val) -#define bfin_read_EPPI0_VCOUNT() bfin_read16(EPPI0_VCOUNT) -#define bfin_write_EPPI0_VCOUNT(val) bfin_write16(EPPI0_VCOUNT, val) -#define bfin_read_EPPI0_VDELAY() bfin_read16(EPPI0_VDELAY) -#define bfin_write_EPPI0_VDELAY(val) bfin_write16(EPPI0_VDELAY, val) -#define bfin_read_EPPI0_FRAME() bfin_read16(EPPI0_FRAME) -#define bfin_write_EPPI0_FRAME(val) bfin_write16(EPPI0_FRAME, val) -#define bfin_read_EPPI0_LINE() bfin_read16(EPPI0_LINE) -#define bfin_write_EPPI0_LINE(val) bfin_write16(EPPI0_LINE, val) -#define bfin_read_EPPI0_CLKDIV() bfin_read16(EPPI0_CLKDIV) -#define bfin_write_EPPI0_CLKDIV(val) bfin_write16(EPPI0_CLKDIV, val) -#define bfin_read_EPPI0_CONTROL() bfin_read32(EPPI0_CONTROL) -#define bfin_write_EPPI0_CONTROL(val) bfin_write32(EPPI0_CONTROL, val) -#define bfin_read_EPPI0_FS1W_HBL() bfin_read32(EPPI0_FS1W_HBL) -#define bfin_write_EPPI0_FS1W_HBL(val) bfin_write32(EPPI0_FS1W_HBL, val) -#define bfin_read_EPPI0_FS1P_AVPL() bfin_read32(EPPI0_FS1P_AVPL) -#define bfin_write_EPPI0_FS1P_AVPL(val) bfin_write32(EPPI0_FS1P_AVPL, val) -#define bfin_read_EPPI0_FS2W_LVB() bfin_read32(EPPI0_FS2W_LVB) -#define bfin_write_EPPI0_FS2W_LVB(val) bfin_write32(EPPI0_FS2W_LVB, val) -#define bfin_read_EPPI0_FS2P_LAVF() bfin_read32(EPPI0_FS2P_LAVF) -#define bfin_write_EPPI0_FS2P_LAVF(val) bfin_write32(EPPI0_FS2P_LAVF, val) -#define bfin_read_EPPI0_CLIP() bfin_read32(EPPI0_CLIP) -#define bfin_write_EPPI0_CLIP(val) bfin_write32(EPPI0_CLIP, val) - -/* UART2 Registers */ - -#define bfin_read_UART2_DLL() bfin_read16(UART2_DLL) -#define bfin_write_UART2_DLL(val) bfin_write16(UART2_DLL, val) -#define bfin_read_UART2_DLH() bfin_read16(UART2_DLH) -#define bfin_write_UART2_DLH(val) bfin_write16(UART2_DLH, val) -#define bfin_read_UART2_GCTL() bfin_read16(UART2_GCTL) -#define bfin_write_UART2_GCTL(val) bfin_write16(UART2_GCTL, val) -#define bfin_read_UART2_LCR() bfin_read16(UART2_LCR) -#define bfin_write_UART2_LCR(val) bfin_write16(UART2_LCR, val) -#define bfin_read_UART2_MCR() bfin_read16(UART2_MCR) -#define bfin_write_UART2_MCR(val) bfin_write16(UART2_MCR, val) -#define bfin_read_UART2_LSR() bfin_read16(UART2_LSR) -#define bfin_write_UART2_LSR(val) bfin_write16(UART2_LSR, val) -#define bfin_read_UART2_MSR() bfin_read16(UART2_MSR) -#define bfin_write_UART2_MSR(val) bfin_write16(UART2_MSR, val) -#define bfin_read_UART2_SCR() bfin_read16(UART2_SCR) -#define bfin_write_UART2_SCR(val) bfin_write16(UART2_SCR, val) -#define bfin_read_UART2_IER_SET() bfin_read16(UART2_IER_SET) -#define bfin_write_UART2_IER_SET(val) bfin_write16(UART2_IER_SET, val) -#define bfin_read_UART2_IER_CLEAR() bfin_read16(UART2_IER_CLEAR) -#define bfin_write_UART2_IER_CLEAR(val) bfin_write16(UART2_IER_CLEAR, val) -#define bfin_read_UART2_RBR() bfin_read16(UART2_RBR) -#define bfin_write_UART2_RBR(val) bfin_write16(UART2_RBR, val) - -/* Two Wire Interface Registers (TWI1) */ - -/* SPI2 Registers */ - -#define bfin_read_SPI2_CTL() bfin_read16(SPI2_CTL) -#define bfin_write_SPI2_CTL(val) bfin_write16(SPI2_CTL, val) -#define bfin_read_SPI2_FLG() bfin_read16(SPI2_FLG) -#define bfin_write_SPI2_FLG(val) bfin_write16(SPI2_FLG, val) -#define bfin_read_SPI2_STAT() bfin_read16(SPI2_STAT) -#define bfin_write_SPI2_STAT(val) bfin_write16(SPI2_STAT, val) -#define bfin_read_SPI2_TDBR() bfin_read16(SPI2_TDBR) -#define bfin_write_SPI2_TDBR(val) bfin_write16(SPI2_TDBR, val) -#define bfin_read_SPI2_RDBR() bfin_read16(SPI2_RDBR) -#define bfin_write_SPI2_RDBR(val) bfin_write16(SPI2_RDBR, val) -#define bfin_read_SPI2_BAUD() bfin_read16(SPI2_BAUD) -#define bfin_write_SPI2_BAUD(val) bfin_write16(SPI2_BAUD, val) -#define bfin_read_SPI2_SHADOW() bfin_read16(SPI2_SHADOW) -#define bfin_write_SPI2_SHADOW(val) bfin_write16(SPI2_SHADOW, val) +/* The BF549 is like the BF544, but has MXVR */ +#include "cdefBF547.h" /* MXVR Registers */ @@ -464,1376 +307,4 @@ #define bfin_read_MXVR_SCLK_CNT() bfin_read16(MXVR_SCLK_CNT) #define bfin_write_MXVR_SCLK_CNT(val) bfin_write16(MXVR_SCLK_CNT, val) -/* CAN Controller 1 Config 1 Registers */ - -#define bfin_read_CAN1_MC1() bfin_read16(CAN1_MC1) -#define bfin_write_CAN1_MC1(val) bfin_write16(CAN1_MC1, val) -#define bfin_read_CAN1_MD1() bfin_read16(CAN1_MD1) -#define bfin_write_CAN1_MD1(val) bfin_write16(CAN1_MD1, val) -#define bfin_read_CAN1_TRS1() bfin_read16(CAN1_TRS1) -#define bfin_write_CAN1_TRS1(val) bfin_write16(CAN1_TRS1, val) -#define bfin_read_CAN1_TRR1() bfin_read16(CAN1_TRR1) -#define bfin_write_CAN1_TRR1(val) bfin_write16(CAN1_TRR1, val) -#define bfin_read_CAN1_TA1() bfin_read16(CAN1_TA1) -#define bfin_write_CAN1_TA1(val) bfin_write16(CAN1_TA1, val) -#define bfin_read_CAN1_AA1() bfin_read16(CAN1_AA1) -#define bfin_write_CAN1_AA1(val) bfin_write16(CAN1_AA1, val) -#define bfin_read_CAN1_RMP1() bfin_read16(CAN1_RMP1) -#define bfin_write_CAN1_RMP1(val) bfin_write16(CAN1_RMP1, val) -#define bfin_read_CAN1_RML1() bfin_read16(CAN1_RML1) -#define bfin_write_CAN1_RML1(val) bfin_write16(CAN1_RML1, val) -#define bfin_read_CAN1_MBTIF1() bfin_read16(CAN1_MBTIF1) -#define bfin_write_CAN1_MBTIF1(val) bfin_write16(CAN1_MBTIF1, val) -#define bfin_read_CAN1_MBRIF1() bfin_read16(CAN1_MBRIF1) -#define bfin_write_CAN1_MBRIF1(val) bfin_write16(CAN1_MBRIF1, val) -#define bfin_read_CAN1_MBIM1() bfin_read16(CAN1_MBIM1) -#define bfin_write_CAN1_MBIM1(val) bfin_write16(CAN1_MBIM1, val) -#define bfin_read_CAN1_RFH1() bfin_read16(CAN1_RFH1) -#define bfin_write_CAN1_RFH1(val) bfin_write16(CAN1_RFH1, val) -#define bfin_read_CAN1_OPSS1() bfin_read16(CAN1_OPSS1) -#define bfin_write_CAN1_OPSS1(val) bfin_write16(CAN1_OPSS1, val) - -/* CAN Controller 1 Config 2 Registers */ - -#define bfin_read_CAN1_MC2() bfin_read16(CAN1_MC2) -#define bfin_write_CAN1_MC2(val) bfin_write16(CAN1_MC2, val) -#define bfin_read_CAN1_MD2() bfin_read16(CAN1_MD2) -#define bfin_write_CAN1_MD2(val) bfin_write16(CAN1_MD2, val) -#define bfin_read_CAN1_TRS2() bfin_read16(CAN1_TRS2) -#define bfin_write_CAN1_TRS2(val) bfin_write16(CAN1_TRS2, val) -#define bfin_read_CAN1_TRR2() bfin_read16(CAN1_TRR2) -#define bfin_write_CAN1_TRR2(val) bfin_write16(CAN1_TRR2, val) -#define bfin_read_CAN1_TA2() bfin_read16(CAN1_TA2) -#define bfin_write_CAN1_TA2(val) bfin_write16(CAN1_TA2, val) -#define bfin_read_CAN1_AA2() bfin_read16(CAN1_AA2) -#define bfin_write_CAN1_AA2(val) bfin_write16(CAN1_AA2, val) -#define bfin_read_CAN1_RMP2() bfin_read16(CAN1_RMP2) -#define bfin_write_CAN1_RMP2(val) bfin_write16(CAN1_RMP2, val) -#define bfin_read_CAN1_RML2() bfin_read16(CAN1_RML2) -#define bfin_write_CAN1_RML2(val) bfin_write16(CAN1_RML2, val) -#define bfin_read_CAN1_MBTIF2() bfin_read16(CAN1_MBTIF2) -#define bfin_write_CAN1_MBTIF2(val) bfin_write16(CAN1_MBTIF2, val) -#define bfin_read_CAN1_MBRIF2() bfin_read16(CAN1_MBRIF2) -#define bfin_write_CAN1_MBRIF2(val) bfin_write16(CAN1_MBRIF2, val) -#define bfin_read_CAN1_MBIM2() bfin_read16(CAN1_MBIM2) -#define bfin_write_CAN1_MBIM2(val) bfin_write16(CAN1_MBIM2, val) -#define bfin_read_CAN1_RFH2() bfin_read16(CAN1_RFH2) -#define bfin_write_CAN1_RFH2(val) bfin_write16(CAN1_RFH2, val) -#define bfin_read_CAN1_OPSS2() bfin_read16(CAN1_OPSS2) -#define bfin_write_CAN1_OPSS2(val) bfin_write16(CAN1_OPSS2, val) - -/* CAN Controller 1 Clock/Interrubfin_read_()t/Counter Registers */ - -#define bfin_read_CAN1_CLOCK() bfin_read16(CAN1_CLOCK) -#define bfin_write_CAN1_CLOCK(val) bfin_write16(CAN1_CLOCK, val) -#define bfin_read_CAN1_TIMING() bfin_read16(CAN1_TIMING) -#define bfin_write_CAN1_TIMING(val) bfin_write16(CAN1_TIMING, val) -#define bfin_read_CAN1_DEBUG() bfin_read16(CAN1_DEBUG) -#define bfin_write_CAN1_DEBUG(val) bfin_write16(CAN1_DEBUG, val) -#define bfin_read_CAN1_STATUS() bfin_read16(CAN1_STATUS) -#define bfin_write_CAN1_STATUS(val) bfin_write16(CAN1_STATUS, val) -#define bfin_read_CAN1_CEC() bfin_read16(CAN1_CEC) -#define bfin_write_CAN1_CEC(val) bfin_write16(CAN1_CEC, val) -#define bfin_read_CAN1_GIS() bfin_read16(CAN1_GIS) -#define bfin_write_CAN1_GIS(val) bfin_write16(CAN1_GIS, val) -#define bfin_read_CAN1_GIM() bfin_read16(CAN1_GIM) -#define bfin_write_CAN1_GIM(val) bfin_write16(CAN1_GIM, val) -#define bfin_read_CAN1_GIF() bfin_read16(CAN1_GIF) -#define bfin_write_CAN1_GIF(val) bfin_write16(CAN1_GIF, val) -#define bfin_read_CAN1_CONTROL() bfin_read16(CAN1_CONTROL) -#define bfin_write_CAN1_CONTROL(val) bfin_write16(CAN1_CONTROL, val) -#define bfin_read_CAN1_INTR() bfin_read16(CAN1_INTR) -#define bfin_write_CAN1_INTR(val) bfin_write16(CAN1_INTR, val) -#define bfin_read_CAN1_MBTD() bfin_read16(CAN1_MBTD) -#define bfin_write_CAN1_MBTD(val) bfin_write16(CAN1_MBTD, val) -#define bfin_read_CAN1_EWR() bfin_read16(CAN1_EWR) -#define bfin_write_CAN1_EWR(val) bfin_write16(CAN1_EWR, val) -#define bfin_read_CAN1_ESR() bfin_read16(CAN1_ESR) -#define bfin_write_CAN1_ESR(val) bfin_write16(CAN1_ESR, val) -#define bfin_read_CAN1_UCCNT() bfin_read16(CAN1_UCCNT) -#define bfin_write_CAN1_UCCNT(val) bfin_write16(CAN1_UCCNT, val) -#define bfin_read_CAN1_UCRC() bfin_read16(CAN1_UCRC) -#define bfin_write_CAN1_UCRC(val) bfin_write16(CAN1_UCRC, val) -#define bfin_read_CAN1_UCCNF() bfin_read16(CAN1_UCCNF) -#define bfin_write_CAN1_UCCNF(val) bfin_write16(CAN1_UCCNF, val) - -/* CAN Controller 1 Mailbox Accebfin_read_()tance Registers */ - -#define bfin_read_CAN1_AM00L() bfin_read16(CAN1_AM00L) -#define bfin_write_CAN1_AM00L(val) bfin_write16(CAN1_AM00L, val) -#define bfin_read_CAN1_AM00H() bfin_read16(CAN1_AM00H) -#define bfin_write_CAN1_AM00H(val) bfin_write16(CAN1_AM00H, val) -#define bfin_read_CAN1_AM01L() bfin_read16(CAN1_AM01L) -#define bfin_write_CAN1_AM01L(val) bfin_write16(CAN1_AM01L, val) -#define bfin_read_CAN1_AM01H() bfin_read16(CAN1_AM01H) -#define bfin_write_CAN1_AM01H(val) bfin_write16(CAN1_AM01H, val) -#define bfin_read_CAN1_AM02L() bfin_read16(CAN1_AM02L) -#define bfin_write_CAN1_AM02L(val) bfin_write16(CAN1_AM02L, val) -#define bfin_read_CAN1_AM02H() bfin_read16(CAN1_AM02H) -#define bfin_write_CAN1_AM02H(val) bfin_write16(CAN1_AM02H, val) -#define bfin_read_CAN1_AM03L() bfin_read16(CAN1_AM03L) -#define bfin_write_CAN1_AM03L(val) bfin_write16(CAN1_AM03L, val) -#define bfin_read_CAN1_AM03H() bfin_read16(CAN1_AM03H) -#define bfin_write_CAN1_AM03H(val) bfin_write16(CAN1_AM03H, val) -#define bfin_read_CAN1_AM04L() bfin_read16(CAN1_AM04L) -#define bfin_write_CAN1_AM04L(val) bfin_write16(CAN1_AM04L, val) -#define bfin_read_CAN1_AM04H() bfin_read16(CAN1_AM04H) -#define bfin_write_CAN1_AM04H(val) bfin_write16(CAN1_AM04H, val) -#define bfin_read_CAN1_AM05L() bfin_read16(CAN1_AM05L) -#define bfin_write_CAN1_AM05L(val) bfin_write16(CAN1_AM05L, val) -#define bfin_read_CAN1_AM05H() bfin_read16(CAN1_AM05H) -#define bfin_write_CAN1_AM05H(val) bfin_write16(CAN1_AM05H, val) -#define bfin_read_CAN1_AM06L() bfin_read16(CAN1_AM06L) -#define bfin_write_CAN1_AM06L(val) bfin_write16(CAN1_AM06L, val) -#define bfin_read_CAN1_AM06H() bfin_read16(CAN1_AM06H) -#define bfin_write_CAN1_AM06H(val) bfin_write16(CAN1_AM06H, val) -#define bfin_read_CAN1_AM07L() bfin_read16(CAN1_AM07L) -#define bfin_write_CAN1_AM07L(val) bfin_write16(CAN1_AM07L, val) -#define bfin_read_CAN1_AM07H() bfin_read16(CAN1_AM07H) -#define bfin_write_CAN1_AM07H(val) bfin_write16(CAN1_AM07H, val) -#define bfin_read_CAN1_AM08L() bfin_read16(CAN1_AM08L) -#define bfin_write_CAN1_AM08L(val) bfin_write16(CAN1_AM08L, val) -#define bfin_read_CAN1_AM08H() bfin_read16(CAN1_AM08H) -#define bfin_write_CAN1_AM08H(val) bfin_write16(CAN1_AM08H, val) -#define bfin_read_CAN1_AM09L() bfin_read16(CAN1_AM09L) -#define bfin_write_CAN1_AM09L(val) bfin_write16(CAN1_AM09L, val) -#define bfin_read_CAN1_AM09H() bfin_read16(CAN1_AM09H) -#define bfin_write_CAN1_AM09H(val) bfin_write16(CAN1_AM09H, val) -#define bfin_read_CAN1_AM10L() bfin_read16(CAN1_AM10L) -#define bfin_write_CAN1_AM10L(val) bfin_write16(CAN1_AM10L, val) -#define bfin_read_CAN1_AM10H() bfin_read16(CAN1_AM10H) -#define bfin_write_CAN1_AM10H(val) bfin_write16(CAN1_AM10H, val) -#define bfin_read_CAN1_AM11L() bfin_read16(CAN1_AM11L) -#define bfin_write_CAN1_AM11L(val) bfin_write16(CAN1_AM11L, val) -#define bfin_read_CAN1_AM11H() bfin_read16(CAN1_AM11H) -#define bfin_write_CAN1_AM11H(val) bfin_write16(CAN1_AM11H, val) -#define bfin_read_CAN1_AM12L() bfin_read16(CAN1_AM12L) -#define bfin_write_CAN1_AM12L(val) bfin_write16(CAN1_AM12L, val) -#define bfin_read_CAN1_AM12H() bfin_read16(CAN1_AM12H) -#define bfin_write_CAN1_AM12H(val) bfin_write16(CAN1_AM12H, val) -#define bfin_read_CAN1_AM13L() bfin_read16(CAN1_AM13L) -#define bfin_write_CAN1_AM13L(val) bfin_write16(CAN1_AM13L, val) -#define bfin_read_CAN1_AM13H() bfin_read16(CAN1_AM13H) -#define bfin_write_CAN1_AM13H(val) bfin_write16(CAN1_AM13H, val) -#define bfin_read_CAN1_AM14L() bfin_read16(CAN1_AM14L) -#define bfin_write_CAN1_AM14L(val) bfin_write16(CAN1_AM14L, val) -#define bfin_read_CAN1_AM14H() bfin_read16(CAN1_AM14H) -#define bfin_write_CAN1_AM14H(val) bfin_write16(CAN1_AM14H, val) -#define bfin_read_CAN1_AM15L() bfin_read16(CAN1_AM15L) -#define bfin_write_CAN1_AM15L(val) bfin_write16(CAN1_AM15L, val) -#define bfin_read_CAN1_AM15H() bfin_read16(CAN1_AM15H) -#define bfin_write_CAN1_AM15H(val) bfin_write16(CAN1_AM15H, val) - -/* CAN Controller 1 Mailbox Accebfin_read_()tance Registers */ - -#define bfin_read_CAN1_AM16L() bfin_read16(CAN1_AM16L) -#define bfin_write_CAN1_AM16L(val) bfin_write16(CAN1_AM16L, val) -#define bfin_read_CAN1_AM16H() bfin_read16(CAN1_AM16H) -#define bfin_write_CAN1_AM16H(val) bfin_write16(CAN1_AM16H, val) -#define bfin_read_CAN1_AM17L() bfin_read16(CAN1_AM17L) -#define bfin_write_CAN1_AM17L(val) bfin_write16(CAN1_AM17L, val) -#define bfin_read_CAN1_AM17H() bfin_read16(CAN1_AM17H) -#define bfin_write_CAN1_AM17H(val) bfin_write16(CAN1_AM17H, val) -#define bfin_read_CAN1_AM18L() bfin_read16(CAN1_AM18L) -#define bfin_write_CAN1_AM18L(val) bfin_write16(CAN1_AM18L, val) -#define bfin_read_CAN1_AM18H() bfin_read16(CAN1_AM18H) -#define bfin_write_CAN1_AM18H(val) bfin_write16(CAN1_AM18H, val) -#define bfin_read_CAN1_AM19L() bfin_read16(CAN1_AM19L) -#define bfin_write_CAN1_AM19L(val) bfin_write16(CAN1_AM19L, val) -#define bfin_read_CAN1_AM19H() bfin_read16(CAN1_AM19H) -#define bfin_write_CAN1_AM19H(val) bfin_write16(CAN1_AM19H, val) -#define bfin_read_CAN1_AM20L() bfin_read16(CAN1_AM20L) -#define bfin_write_CAN1_AM20L(val) bfin_write16(CAN1_AM20L, val) -#define bfin_read_CAN1_AM20H() bfin_read16(CAN1_AM20H) -#define bfin_write_CAN1_AM20H(val) bfin_write16(CAN1_AM20H, val) -#define bfin_read_CAN1_AM21L() bfin_read16(CAN1_AM21L) -#define bfin_write_CAN1_AM21L(val) bfin_write16(CAN1_AM21L, val) -#define bfin_read_CAN1_AM21H() bfin_read16(CAN1_AM21H) -#define bfin_write_CAN1_AM21H(val) bfin_write16(CAN1_AM21H, val) -#define bfin_read_CAN1_AM22L() bfin_read16(CAN1_AM22L) -#define bfin_write_CAN1_AM22L(val) bfin_write16(CAN1_AM22L, val) -#define bfin_read_CAN1_AM22H() bfin_read16(CAN1_AM22H) -#define bfin_write_CAN1_AM22H(val) bfin_write16(CAN1_AM22H, val) -#define bfin_read_CAN1_AM23L() bfin_read16(CAN1_AM23L) -#define bfin_write_CAN1_AM23L(val) bfin_write16(CAN1_AM23L, val) -#define bfin_read_CAN1_AM23H() bfin_read16(CAN1_AM23H) -#define bfin_write_CAN1_AM23H(val) bfin_write16(CAN1_AM23H, val) -#define bfin_read_CAN1_AM24L() bfin_read16(CAN1_AM24L) -#define bfin_write_CAN1_AM24L(val) bfin_write16(CAN1_AM24L, val) -#define bfin_read_CAN1_AM24H() bfin_read16(CAN1_AM24H) -#define bfin_write_CAN1_AM24H(val) bfin_write16(CAN1_AM24H, val) -#define bfin_read_CAN1_AM25L() bfin_read16(CAN1_AM25L) -#define bfin_write_CAN1_AM25L(val) bfin_write16(CAN1_AM25L, val) -#define bfin_read_CAN1_AM25H() bfin_read16(CAN1_AM25H) -#define bfin_write_CAN1_AM25H(val) bfin_write16(CAN1_AM25H, val) -#define bfin_read_CAN1_AM26L() bfin_read16(CAN1_AM26L) -#define bfin_write_CAN1_AM26L(val) bfin_write16(CAN1_AM26L, val) -#define bfin_read_CAN1_AM26H() bfin_read16(CAN1_AM26H) -#define bfin_write_CAN1_AM26H(val) bfin_write16(CAN1_AM26H, val) -#define bfin_read_CAN1_AM27L() bfin_read16(CAN1_AM27L) -#define bfin_write_CAN1_AM27L(val) bfin_write16(CAN1_AM27L, val) -#define bfin_read_CAN1_AM27H() bfin_read16(CAN1_AM27H) -#define bfin_write_CAN1_AM27H(val) bfin_write16(CAN1_AM27H, val) -#define bfin_read_CAN1_AM28L() bfin_read16(CAN1_AM28L) -#define bfin_write_CAN1_AM28L(val) bfin_write16(CAN1_AM28L, val) -#define bfin_read_CAN1_AM28H() bfin_read16(CAN1_AM28H) -#define bfin_write_CAN1_AM28H(val) bfin_write16(CAN1_AM28H, val) -#define bfin_read_CAN1_AM29L() bfin_read16(CAN1_AM29L) -#define bfin_write_CAN1_AM29L(val) bfin_write16(CAN1_AM29L, val) -#define bfin_read_CAN1_AM29H() bfin_read16(CAN1_AM29H) -#define bfin_write_CAN1_AM29H(val) bfin_write16(CAN1_AM29H, val) -#define bfin_read_CAN1_AM30L() bfin_read16(CAN1_AM30L) -#define bfin_write_CAN1_AM30L(val) bfin_write16(CAN1_AM30L, val) -#define bfin_read_CAN1_AM30H() bfin_read16(CAN1_AM30H) -#define bfin_write_CAN1_AM30H(val) bfin_write16(CAN1_AM30H, val) -#define bfin_read_CAN1_AM31L() bfin_read16(CAN1_AM31L) -#define bfin_write_CAN1_AM31L(val) bfin_write16(CAN1_AM31L, val) -#define bfin_read_CAN1_AM31H() bfin_read16(CAN1_AM31H) -#define bfin_write_CAN1_AM31H(val) bfin_write16(CAN1_AM31H, val) - -/* CAN Controller 1 Mailbox Data Registers */ - -#define bfin_read_CAN1_MB00_DATA0() bfin_read16(CAN1_MB00_DATA0) -#define bfin_write_CAN1_MB00_DATA0(val) bfin_write16(CAN1_MB00_DATA0, val) -#define bfin_read_CAN1_MB00_DATA1() bfin_read16(CAN1_MB00_DATA1) -#define bfin_write_CAN1_MB00_DATA1(val) bfin_write16(CAN1_MB00_DATA1, val) -#define bfin_read_CAN1_MB00_DATA2() bfin_read16(CAN1_MB00_DATA2) -#define bfin_write_CAN1_MB00_DATA2(val) bfin_write16(CAN1_MB00_DATA2, val) -#define bfin_read_CAN1_MB00_DATA3() bfin_read16(CAN1_MB00_DATA3) -#define bfin_write_CAN1_MB00_DATA3(val) bfin_write16(CAN1_MB00_DATA3, val) -#define bfin_read_CAN1_MB00_LENGTH() bfin_read16(CAN1_MB00_LENGTH) -#define bfin_write_CAN1_MB00_LENGTH(val) bfin_write16(CAN1_MB00_LENGTH, val) -#define bfin_read_CAN1_MB00_TIMESTAMP() bfin_read16(CAN1_MB00_TIMESTAMP) -#define bfin_write_CAN1_MB00_TIMESTAMP(val) bfin_write16(CAN1_MB00_TIMESTAMP, val) -#define bfin_read_CAN1_MB00_ID0() bfin_read16(CAN1_MB00_ID0) -#define bfin_write_CAN1_MB00_ID0(val) bfin_write16(CAN1_MB00_ID0, val) -#define bfin_read_CAN1_MB00_ID1() bfin_read16(CAN1_MB00_ID1) -#define bfin_write_CAN1_MB00_ID1(val) bfin_write16(CAN1_MB00_ID1, val) -#define bfin_read_CAN1_MB01_DATA0() bfin_read16(CAN1_MB01_DATA0) -#define bfin_write_CAN1_MB01_DATA0(val) bfin_write16(CAN1_MB01_DATA0, val) -#define bfin_read_CAN1_MB01_DATA1() bfin_read16(CAN1_MB01_DATA1) -#define bfin_write_CAN1_MB01_DATA1(val) bfin_write16(CAN1_MB01_DATA1, val) -#define bfin_read_CAN1_MB01_DATA2() bfin_read16(CAN1_MB01_DATA2) -#define bfin_write_CAN1_MB01_DATA2(val) bfin_write16(CAN1_MB01_DATA2, val) -#define bfin_read_CAN1_MB01_DATA3() bfin_read16(CAN1_MB01_DATA3) -#define bfin_write_CAN1_MB01_DATA3(val) bfin_write16(CAN1_MB01_DATA3, val) -#define bfin_read_CAN1_MB01_LENGTH() bfin_read16(CAN1_MB01_LENGTH) -#define bfin_write_CAN1_MB01_LENGTH(val) bfin_write16(CAN1_MB01_LENGTH, val) -#define bfin_read_CAN1_MB01_TIMESTAMP() bfin_read16(CAN1_MB01_TIMESTAMP) -#define bfin_write_CAN1_MB01_TIMESTAMP(val) bfin_write16(CAN1_MB01_TIMESTAMP, val) -#define bfin_read_CAN1_MB01_ID0() bfin_read16(CAN1_MB01_ID0) -#define bfin_write_CAN1_MB01_ID0(val) bfin_write16(CAN1_MB01_ID0, val) -#define bfin_read_CAN1_MB01_ID1() bfin_read16(CAN1_MB01_ID1) -#define bfin_write_CAN1_MB01_ID1(val) bfin_write16(CAN1_MB01_ID1, val) -#define bfin_read_CAN1_MB02_DATA0() bfin_read16(CAN1_MB02_DATA0) -#define bfin_write_CAN1_MB02_DATA0(val) bfin_write16(CAN1_MB02_DATA0, val) -#define bfin_read_CAN1_MB02_DATA1() bfin_read16(CAN1_MB02_DATA1) -#define bfin_write_CAN1_MB02_DATA1(val) bfin_write16(CAN1_MB02_DATA1, val) -#define bfin_read_CAN1_MB02_DATA2() bfin_read16(CAN1_MB02_DATA2) -#define bfin_write_CAN1_MB02_DATA2(val) bfin_write16(CAN1_MB02_DATA2, val) -#define bfin_read_CAN1_MB02_DATA3() bfin_read16(CAN1_MB02_DATA3) -#define bfin_write_CAN1_MB02_DATA3(val) bfin_write16(CAN1_MB02_DATA3, val) -#define bfin_read_CAN1_MB02_LENGTH() bfin_read16(CAN1_MB02_LENGTH) -#define bfin_write_CAN1_MB02_LENGTH(val) bfin_write16(CAN1_MB02_LENGTH, val) -#define bfin_read_CAN1_MB02_TIMESTAMP() bfin_read16(CAN1_MB02_TIMESTAMP) -#define bfin_write_CAN1_MB02_TIMESTAMP(val) bfin_write16(CAN1_MB02_TIMESTAMP, val) -#define bfin_read_CAN1_MB02_ID0() bfin_read16(CAN1_MB02_ID0) -#define bfin_write_CAN1_MB02_ID0(val) bfin_write16(CAN1_MB02_ID0, val) -#define bfin_read_CAN1_MB02_ID1() bfin_read16(CAN1_MB02_ID1) -#define bfin_write_CAN1_MB02_ID1(val) bfin_write16(CAN1_MB02_ID1, val) -#define bfin_read_CAN1_MB03_DATA0() bfin_read16(CAN1_MB03_DATA0) -#define bfin_write_CAN1_MB03_DATA0(val) bfin_write16(CAN1_MB03_DATA0, val) -#define bfin_read_CAN1_MB03_DATA1() bfin_read16(CAN1_MB03_DATA1) -#define bfin_write_CAN1_MB03_DATA1(val) bfin_write16(CAN1_MB03_DATA1, val) -#define bfin_read_CAN1_MB03_DATA2() bfin_read16(CAN1_MB03_DATA2) -#define bfin_write_CAN1_MB03_DATA2(val) bfin_write16(CAN1_MB03_DATA2, val) -#define bfin_read_CAN1_MB03_DATA3() bfin_read16(CAN1_MB03_DATA3) -#define bfin_write_CAN1_MB03_DATA3(val) bfin_write16(CAN1_MB03_DATA3, val) -#define bfin_read_CAN1_MB03_LENGTH() bfin_read16(CAN1_MB03_LENGTH) -#define bfin_write_CAN1_MB03_LENGTH(val) bfin_write16(CAN1_MB03_LENGTH, val) -#define bfin_read_CAN1_MB03_TIMESTAMP() bfin_read16(CAN1_MB03_TIMESTAMP) -#define bfin_write_CAN1_MB03_TIMESTAMP(val) bfin_write16(CAN1_MB03_TIMESTAMP, val) -#define bfin_read_CAN1_MB03_ID0() bfin_read16(CAN1_MB03_ID0) -#define bfin_write_CAN1_MB03_ID0(val) bfin_write16(CAN1_MB03_ID0, val) -#define bfin_read_CAN1_MB03_ID1() bfin_read16(CAN1_MB03_ID1) -#define bfin_write_CAN1_MB03_ID1(val) bfin_write16(CAN1_MB03_ID1, val) -#define bfin_read_CAN1_MB04_DATA0() bfin_read16(CAN1_MB04_DATA0) -#define bfin_write_CAN1_MB04_DATA0(val) bfin_write16(CAN1_MB04_DATA0, val) -#define bfin_read_CAN1_MB04_DATA1() bfin_read16(CAN1_MB04_DATA1) -#define bfin_write_CAN1_MB04_DATA1(val) bfin_write16(CAN1_MB04_DATA1, val) -#define bfin_read_CAN1_MB04_DATA2() bfin_read16(CAN1_MB04_DATA2) -#define bfin_write_CAN1_MB04_DATA2(val) bfin_write16(CAN1_MB04_DATA2, val) -#define bfin_read_CAN1_MB04_DATA3() bfin_read16(CAN1_MB04_DATA3) -#define bfin_write_CAN1_MB04_DATA3(val) bfin_write16(CAN1_MB04_DATA3, val) -#define bfin_read_CAN1_MB04_LENGTH() bfin_read16(CAN1_MB04_LENGTH) -#define bfin_write_CAN1_MB04_LENGTH(val) bfin_write16(CAN1_MB04_LENGTH, val) -#define bfin_read_CAN1_MB04_TIMESTAMP() bfin_read16(CAN1_MB04_TIMESTAMP) -#define bfin_write_CAN1_MB04_TIMESTAMP(val) bfin_write16(CAN1_MB04_TIMESTAMP, val) -#define bfin_read_CAN1_MB04_ID0() bfin_read16(CAN1_MB04_ID0) -#define bfin_write_CAN1_MB04_ID0(val) bfin_write16(CAN1_MB04_ID0, val) -#define bfin_read_CAN1_MB04_ID1() bfin_read16(CAN1_MB04_ID1) -#define bfin_write_CAN1_MB04_ID1(val) bfin_write16(CAN1_MB04_ID1, val) -#define bfin_read_CAN1_MB05_DATA0() bfin_read16(CAN1_MB05_DATA0) -#define bfin_write_CAN1_MB05_DATA0(val) bfin_write16(CAN1_MB05_DATA0, val) -#define bfin_read_CAN1_MB05_DATA1() bfin_read16(CAN1_MB05_DATA1) -#define bfin_write_CAN1_MB05_DATA1(val) bfin_write16(CAN1_MB05_DATA1, val) -#define bfin_read_CAN1_MB05_DATA2() bfin_read16(CAN1_MB05_DATA2) -#define bfin_write_CAN1_MB05_DATA2(val) bfin_write16(CAN1_MB05_DATA2, val) -#define bfin_read_CAN1_MB05_DATA3() bfin_read16(CAN1_MB05_DATA3) -#define bfin_write_CAN1_MB05_DATA3(val) bfin_write16(CAN1_MB05_DATA3, val) -#define bfin_read_CAN1_MB05_LENGTH() bfin_read16(CAN1_MB05_LENGTH) -#define bfin_write_CAN1_MB05_LENGTH(val) bfin_write16(CAN1_MB05_LENGTH, val) -#define bfin_read_CAN1_MB05_TIMESTAMP() bfin_read16(CAN1_MB05_TIMESTAMP) -#define bfin_write_CAN1_MB05_TIMESTAMP(val) bfin_write16(CAN1_MB05_TIMESTAMP, val) -#define bfin_read_CAN1_MB05_ID0() bfin_read16(CAN1_MB05_ID0) -#define bfin_write_CAN1_MB05_ID0(val) bfin_write16(CAN1_MB05_ID0, val) -#define bfin_read_CAN1_MB05_ID1() bfin_read16(CAN1_MB05_ID1) -#define bfin_write_CAN1_MB05_ID1(val) bfin_write16(CAN1_MB05_ID1, val) -#define bfin_read_CAN1_MB06_DATA0() bfin_read16(CAN1_MB06_DATA0) -#define bfin_write_CAN1_MB06_DATA0(val) bfin_write16(CAN1_MB06_DATA0, val) -#define bfin_read_CAN1_MB06_DATA1() bfin_read16(CAN1_MB06_DATA1) -#define bfin_write_CAN1_MB06_DATA1(val) bfin_write16(CAN1_MB06_DATA1, val) -#define bfin_read_CAN1_MB06_DATA2() bfin_read16(CAN1_MB06_DATA2) -#define bfin_write_CAN1_MB06_DATA2(val) bfin_write16(CAN1_MB06_DATA2, val) -#define bfin_read_CAN1_MB06_DATA3() bfin_read16(CAN1_MB06_DATA3) -#define bfin_write_CAN1_MB06_DATA3(val) bfin_write16(CAN1_MB06_DATA3, val) -#define bfin_read_CAN1_MB06_LENGTH() bfin_read16(CAN1_MB06_LENGTH) -#define bfin_write_CAN1_MB06_LENGTH(val) bfin_write16(CAN1_MB06_LENGTH, val) -#define bfin_read_CAN1_MB06_TIMESTAMP() bfin_read16(CAN1_MB06_TIMESTAMP) -#define bfin_write_CAN1_MB06_TIMESTAMP(val) bfin_write16(CAN1_MB06_TIMESTAMP, val) -#define bfin_read_CAN1_MB06_ID0() bfin_read16(CAN1_MB06_ID0) -#define bfin_write_CAN1_MB06_ID0(val) bfin_write16(CAN1_MB06_ID0, val) -#define bfin_read_CAN1_MB06_ID1() bfin_read16(CAN1_MB06_ID1) -#define bfin_write_CAN1_MB06_ID1(val) bfin_write16(CAN1_MB06_ID1, val) -#define bfin_read_CAN1_MB07_DATA0() bfin_read16(CAN1_MB07_DATA0) -#define bfin_write_CAN1_MB07_DATA0(val) bfin_write16(CAN1_MB07_DATA0, val) -#define bfin_read_CAN1_MB07_DATA1() bfin_read16(CAN1_MB07_DATA1) -#define bfin_write_CAN1_MB07_DATA1(val) bfin_write16(CAN1_MB07_DATA1, val) -#define bfin_read_CAN1_MB07_DATA2() bfin_read16(CAN1_MB07_DATA2) -#define bfin_write_CAN1_MB07_DATA2(val) bfin_write16(CAN1_MB07_DATA2, val) -#define bfin_read_CAN1_MB07_DATA3() bfin_read16(CAN1_MB07_DATA3) -#define bfin_write_CAN1_MB07_DATA3(val) bfin_write16(CAN1_MB07_DATA3, val) -#define bfin_read_CAN1_MB07_LENGTH() bfin_read16(CAN1_MB07_LENGTH) -#define bfin_write_CAN1_MB07_LENGTH(val) bfin_write16(CAN1_MB07_LENGTH, val) -#define bfin_read_CAN1_MB07_TIMESTAMP() bfin_read16(CAN1_MB07_TIMESTAMP) -#define bfin_write_CAN1_MB07_TIMESTAMP(val) bfin_write16(CAN1_MB07_TIMESTAMP, val) -#define bfin_read_CAN1_MB07_ID0() bfin_read16(CAN1_MB07_ID0) -#define bfin_write_CAN1_MB07_ID0(val) bfin_write16(CAN1_MB07_ID0, val) -#define bfin_read_CAN1_MB07_ID1() bfin_read16(CAN1_MB07_ID1) -#define bfin_write_CAN1_MB07_ID1(val) bfin_write16(CAN1_MB07_ID1, val) -#define bfin_read_CAN1_MB08_DATA0() bfin_read16(CAN1_MB08_DATA0) -#define bfin_write_CAN1_MB08_DATA0(val) bfin_write16(CAN1_MB08_DATA0, val) -#define bfin_read_CAN1_MB08_DATA1() bfin_read16(CAN1_MB08_DATA1) -#define bfin_write_CAN1_MB08_DATA1(val) bfin_write16(CAN1_MB08_DATA1, val) -#define bfin_read_CAN1_MB08_DATA2() bfin_read16(CAN1_MB08_DATA2) -#define bfin_write_CAN1_MB08_DATA2(val) bfin_write16(CAN1_MB08_DATA2, val) -#define bfin_read_CAN1_MB08_DATA3() bfin_read16(CAN1_MB08_DATA3) -#define bfin_write_CAN1_MB08_DATA3(val) bfin_write16(CAN1_MB08_DATA3, val) -#define bfin_read_CAN1_MB08_LENGTH() bfin_read16(CAN1_MB08_LENGTH) -#define bfin_write_CAN1_MB08_LENGTH(val) bfin_write16(CAN1_MB08_LENGTH, val) -#define bfin_read_CAN1_MB08_TIMESTAMP() bfin_read16(CAN1_MB08_TIMESTAMP) -#define bfin_write_CAN1_MB08_TIMESTAMP(val) bfin_write16(CAN1_MB08_TIMESTAMP, val) -#define bfin_read_CAN1_MB08_ID0() bfin_read16(CAN1_MB08_ID0) -#define bfin_write_CAN1_MB08_ID0(val) bfin_write16(CAN1_MB08_ID0, val) -#define bfin_read_CAN1_MB08_ID1() bfin_read16(CAN1_MB08_ID1) -#define bfin_write_CAN1_MB08_ID1(val) bfin_write16(CAN1_MB08_ID1, val) -#define bfin_read_CAN1_MB09_DATA0() bfin_read16(CAN1_MB09_DATA0) -#define bfin_write_CAN1_MB09_DATA0(val) bfin_write16(CAN1_MB09_DATA0, val) -#define bfin_read_CAN1_MB09_DATA1() bfin_read16(CAN1_MB09_DATA1) -#define bfin_write_CAN1_MB09_DATA1(val) bfin_write16(CAN1_MB09_DATA1, val) -#define bfin_read_CAN1_MB09_DATA2() bfin_read16(CAN1_MB09_DATA2) -#define bfin_write_CAN1_MB09_DATA2(val) bfin_write16(CAN1_MB09_DATA2, val) -#define bfin_read_CAN1_MB09_DATA3() bfin_read16(CAN1_MB09_DATA3) -#define bfin_write_CAN1_MB09_DATA3(val) bfin_write16(CAN1_MB09_DATA3, val) -#define bfin_read_CAN1_MB09_LENGTH() bfin_read16(CAN1_MB09_LENGTH) -#define bfin_write_CAN1_MB09_LENGTH(val) bfin_write16(CAN1_MB09_LENGTH, val) -#define bfin_read_CAN1_MB09_TIMESTAMP() bfin_read16(CAN1_MB09_TIMESTAMP) -#define bfin_write_CAN1_MB09_TIMESTAMP(val) bfin_write16(CAN1_MB09_TIMESTAMP, val) -#define bfin_read_CAN1_MB09_ID0() bfin_read16(CAN1_MB09_ID0) -#define bfin_write_CAN1_MB09_ID0(val) bfin_write16(CAN1_MB09_ID0, val) -#define bfin_read_CAN1_MB09_ID1() bfin_read16(CAN1_MB09_ID1) -#define bfin_write_CAN1_MB09_ID1(val) bfin_write16(CAN1_MB09_ID1, val) -#define bfin_read_CAN1_MB10_DATA0() bfin_read16(CAN1_MB10_DATA0) -#define bfin_write_CAN1_MB10_DATA0(val) bfin_write16(CAN1_MB10_DATA0, val) -#define bfin_read_CAN1_MB10_DATA1() bfin_read16(CAN1_MB10_DATA1) -#define bfin_write_CAN1_MB10_DATA1(val) bfin_write16(CAN1_MB10_DATA1, val) -#define bfin_read_CAN1_MB10_DATA2() bfin_read16(CAN1_MB10_DATA2) -#define bfin_write_CAN1_MB10_DATA2(val) bfin_write16(CAN1_MB10_DATA2, val) -#define bfin_read_CAN1_MB10_DATA3() bfin_read16(CAN1_MB10_DATA3) -#define bfin_write_CAN1_MB10_DATA3(val) bfin_write16(CAN1_MB10_DATA3, val) -#define bfin_read_CAN1_MB10_LENGTH() bfin_read16(CAN1_MB10_LENGTH) -#define bfin_write_CAN1_MB10_LENGTH(val) bfin_write16(CAN1_MB10_LENGTH, val) -#define bfin_read_CAN1_MB10_TIMESTAMP() bfin_read16(CAN1_MB10_TIMESTAMP) -#define bfin_write_CAN1_MB10_TIMESTAMP(val) bfin_write16(CAN1_MB10_TIMESTAMP, val) -#define bfin_read_CAN1_MB10_ID0() bfin_read16(CAN1_MB10_ID0) -#define bfin_write_CAN1_MB10_ID0(val) bfin_write16(CAN1_MB10_ID0, val) -#define bfin_read_CAN1_MB10_ID1() bfin_read16(CAN1_MB10_ID1) -#define bfin_write_CAN1_MB10_ID1(val) bfin_write16(CAN1_MB10_ID1, val) -#define bfin_read_CAN1_MB11_DATA0() bfin_read16(CAN1_MB11_DATA0) -#define bfin_write_CAN1_MB11_DATA0(val) bfin_write16(CAN1_MB11_DATA0, val) -#define bfin_read_CAN1_MB11_DATA1() bfin_read16(CAN1_MB11_DATA1) -#define bfin_write_CAN1_MB11_DATA1(val) bfin_write16(CAN1_MB11_DATA1, val) -#define bfin_read_CAN1_MB11_DATA2() bfin_read16(CAN1_MB11_DATA2) -#define bfin_write_CAN1_MB11_DATA2(val) bfin_write16(CAN1_MB11_DATA2, val) -#define bfin_read_CAN1_MB11_DATA3() bfin_read16(CAN1_MB11_DATA3) -#define bfin_write_CAN1_MB11_DATA3(val) bfin_write16(CAN1_MB11_DATA3, val) -#define bfin_read_CAN1_MB11_LENGTH() bfin_read16(CAN1_MB11_LENGTH) -#define bfin_write_CAN1_MB11_LENGTH(val) bfin_write16(CAN1_MB11_LENGTH, val) -#define bfin_read_CAN1_MB11_TIMESTAMP() bfin_read16(CAN1_MB11_TIMESTAMP) -#define bfin_write_CAN1_MB11_TIMESTAMP(val) bfin_write16(CAN1_MB11_TIMESTAMP, val) -#define bfin_read_CAN1_MB11_ID0() bfin_read16(CAN1_MB11_ID0) -#define bfin_write_CAN1_MB11_ID0(val) bfin_write16(CAN1_MB11_ID0, val) -#define bfin_read_CAN1_MB11_ID1() bfin_read16(CAN1_MB11_ID1) -#define bfin_write_CAN1_MB11_ID1(val) bfin_write16(CAN1_MB11_ID1, val) -#define bfin_read_CAN1_MB12_DATA0() bfin_read16(CAN1_MB12_DATA0) -#define bfin_write_CAN1_MB12_DATA0(val) bfin_write16(CAN1_MB12_DATA0, val) -#define bfin_read_CAN1_MB12_DATA1() bfin_read16(CAN1_MB12_DATA1) -#define bfin_write_CAN1_MB12_DATA1(val) bfin_write16(CAN1_MB12_DATA1, val) -#define bfin_read_CAN1_MB12_DATA2() bfin_read16(CAN1_MB12_DATA2) -#define bfin_write_CAN1_MB12_DATA2(val) bfin_write16(CAN1_MB12_DATA2, val) -#define bfin_read_CAN1_MB12_DATA3() bfin_read16(CAN1_MB12_DATA3) -#define bfin_write_CAN1_MB12_DATA3(val) bfin_write16(CAN1_MB12_DATA3, val) -#define bfin_read_CAN1_MB12_LENGTH() bfin_read16(CAN1_MB12_LENGTH) -#define bfin_write_CAN1_MB12_LENGTH(val) bfin_write16(CAN1_MB12_LENGTH, val) -#define bfin_read_CAN1_MB12_TIMESTAMP() bfin_read16(CAN1_MB12_TIMESTAMP) -#define bfin_write_CAN1_MB12_TIMESTAMP(val) bfin_write16(CAN1_MB12_TIMESTAMP, val) -#define bfin_read_CAN1_MB12_ID0() bfin_read16(CAN1_MB12_ID0) -#define bfin_write_CAN1_MB12_ID0(val) bfin_write16(CAN1_MB12_ID0, val) -#define bfin_read_CAN1_MB12_ID1() bfin_read16(CAN1_MB12_ID1) -#define bfin_write_CAN1_MB12_ID1(val) bfin_write16(CAN1_MB12_ID1, val) -#define bfin_read_CAN1_MB13_DATA0() bfin_read16(CAN1_MB13_DATA0) -#define bfin_write_CAN1_MB13_DATA0(val) bfin_write16(CAN1_MB13_DATA0, val) -#define bfin_read_CAN1_MB13_DATA1() bfin_read16(CAN1_MB13_DATA1) -#define bfin_write_CAN1_MB13_DATA1(val) bfin_write16(CAN1_MB13_DATA1, val) -#define bfin_read_CAN1_MB13_DATA2() bfin_read16(CAN1_MB13_DATA2) -#define bfin_write_CAN1_MB13_DATA2(val) bfin_write16(CAN1_MB13_DATA2, val) -#define bfin_read_CAN1_MB13_DATA3() bfin_read16(CAN1_MB13_DATA3) -#define bfin_write_CAN1_MB13_DATA3(val) bfin_write16(CAN1_MB13_DATA3, val) -#define bfin_read_CAN1_MB13_LENGTH() bfin_read16(CAN1_MB13_LENGTH) -#define bfin_write_CAN1_MB13_LENGTH(val) bfin_write16(CAN1_MB13_LENGTH, val) -#define bfin_read_CAN1_MB13_TIMESTAMP() bfin_read16(CAN1_MB13_TIMESTAMP) -#define bfin_write_CAN1_MB13_TIMESTAMP(val) bfin_write16(CAN1_MB13_TIMESTAMP, val) -#define bfin_read_CAN1_MB13_ID0() bfin_read16(CAN1_MB13_ID0) -#define bfin_write_CAN1_MB13_ID0(val) bfin_write16(CAN1_MB13_ID0, val) -#define bfin_read_CAN1_MB13_ID1() bfin_read16(CAN1_MB13_ID1) -#define bfin_write_CAN1_MB13_ID1(val) bfin_write16(CAN1_MB13_ID1, val) -#define bfin_read_CAN1_MB14_DATA0() bfin_read16(CAN1_MB14_DATA0) -#define bfin_write_CAN1_MB14_DATA0(val) bfin_write16(CAN1_MB14_DATA0, val) -#define bfin_read_CAN1_MB14_DATA1() bfin_read16(CAN1_MB14_DATA1) -#define bfin_write_CAN1_MB14_DATA1(val) bfin_write16(CAN1_MB14_DATA1, val) -#define bfin_read_CAN1_MB14_DATA2() bfin_read16(CAN1_MB14_DATA2) -#define bfin_write_CAN1_MB14_DATA2(val) bfin_write16(CAN1_MB14_DATA2, val) -#define bfin_read_CAN1_MB14_DATA3() bfin_read16(CAN1_MB14_DATA3) -#define bfin_write_CAN1_MB14_DATA3(val) bfin_write16(CAN1_MB14_DATA3, val) -#define bfin_read_CAN1_MB14_LENGTH() bfin_read16(CAN1_MB14_LENGTH) -#define bfin_write_CAN1_MB14_LENGTH(val) bfin_write16(CAN1_MB14_LENGTH, val) -#define bfin_read_CAN1_MB14_TIMESTAMP() bfin_read16(CAN1_MB14_TIMESTAMP) -#define bfin_write_CAN1_MB14_TIMESTAMP(val) bfin_write16(CAN1_MB14_TIMESTAMP, val) -#define bfin_read_CAN1_MB14_ID0() bfin_read16(CAN1_MB14_ID0) -#define bfin_write_CAN1_MB14_ID0(val) bfin_write16(CAN1_MB14_ID0, val) -#define bfin_read_CAN1_MB14_ID1() bfin_read16(CAN1_MB14_ID1) -#define bfin_write_CAN1_MB14_ID1(val) bfin_write16(CAN1_MB14_ID1, val) -#define bfin_read_CAN1_MB15_DATA0() bfin_read16(CAN1_MB15_DATA0) -#define bfin_write_CAN1_MB15_DATA0(val) bfin_write16(CAN1_MB15_DATA0, val) -#define bfin_read_CAN1_MB15_DATA1() bfin_read16(CAN1_MB15_DATA1) -#define bfin_write_CAN1_MB15_DATA1(val) bfin_write16(CAN1_MB15_DATA1, val) -#define bfin_read_CAN1_MB15_DATA2() bfin_read16(CAN1_MB15_DATA2) -#define bfin_write_CAN1_MB15_DATA2(val) bfin_write16(CAN1_MB15_DATA2, val) -#define bfin_read_CAN1_MB15_DATA3() bfin_read16(CAN1_MB15_DATA3) -#define bfin_write_CAN1_MB15_DATA3(val) bfin_write16(CAN1_MB15_DATA3, val) -#define bfin_read_CAN1_MB15_LENGTH() bfin_read16(CAN1_MB15_LENGTH) -#define bfin_write_CAN1_MB15_LENGTH(val) bfin_write16(CAN1_MB15_LENGTH, val) -#define bfin_read_CAN1_MB15_TIMESTAMP() bfin_read16(CAN1_MB15_TIMESTAMP) -#define bfin_write_CAN1_MB15_TIMESTAMP(val) bfin_write16(CAN1_MB15_TIMESTAMP, val) -#define bfin_read_CAN1_MB15_ID0() bfin_read16(CAN1_MB15_ID0) -#define bfin_write_CAN1_MB15_ID0(val) bfin_write16(CAN1_MB15_ID0, val) -#define bfin_read_CAN1_MB15_ID1() bfin_read16(CAN1_MB15_ID1) -#define bfin_write_CAN1_MB15_ID1(val) bfin_write16(CAN1_MB15_ID1, val) - -/* CAN Controller 1 Mailbox Data Registers */ - -#define bfin_read_CAN1_MB16_DATA0() bfin_read16(CAN1_MB16_DATA0) -#define bfin_write_CAN1_MB16_DATA0(val) bfin_write16(CAN1_MB16_DATA0, val) -#define bfin_read_CAN1_MB16_DATA1() bfin_read16(CAN1_MB16_DATA1) -#define bfin_write_CAN1_MB16_DATA1(val) bfin_write16(CAN1_MB16_DATA1, val) -#define bfin_read_CAN1_MB16_DATA2() bfin_read16(CAN1_MB16_DATA2) -#define bfin_write_CAN1_MB16_DATA2(val) bfin_write16(CAN1_MB16_DATA2, val) -#define bfin_read_CAN1_MB16_DATA3() bfin_read16(CAN1_MB16_DATA3) -#define bfin_write_CAN1_MB16_DATA3(val) bfin_write16(CAN1_MB16_DATA3, val) -#define bfin_read_CAN1_MB16_LENGTH() bfin_read16(CAN1_MB16_LENGTH) -#define bfin_write_CAN1_MB16_LENGTH(val) bfin_write16(CAN1_MB16_LENGTH, val) -#define bfin_read_CAN1_MB16_TIMESTAMP() bfin_read16(CAN1_MB16_TIMESTAMP) -#define bfin_write_CAN1_MB16_TIMESTAMP(val) bfin_write16(CAN1_MB16_TIMESTAMP, val) -#define bfin_read_CAN1_MB16_ID0() bfin_read16(CAN1_MB16_ID0) -#define bfin_write_CAN1_MB16_ID0(val) bfin_write16(CAN1_MB16_ID0, val) -#define bfin_read_CAN1_MB16_ID1() bfin_read16(CAN1_MB16_ID1) -#define bfin_write_CAN1_MB16_ID1(val) bfin_write16(CAN1_MB16_ID1, val) -#define bfin_read_CAN1_MB17_DATA0() bfin_read16(CAN1_MB17_DATA0) -#define bfin_write_CAN1_MB17_DATA0(val) bfin_write16(CAN1_MB17_DATA0, val) -#define bfin_read_CAN1_MB17_DATA1() bfin_read16(CAN1_MB17_DATA1) -#define bfin_write_CAN1_MB17_DATA1(val) bfin_write16(CAN1_MB17_DATA1, val) -#define bfin_read_CAN1_MB17_DATA2() bfin_read16(CAN1_MB17_DATA2) -#define bfin_write_CAN1_MB17_DATA2(val) bfin_write16(CAN1_MB17_DATA2, val) -#define bfin_read_CAN1_MB17_DATA3() bfin_read16(CAN1_MB17_DATA3) -#define bfin_write_CAN1_MB17_DATA3(val) bfin_write16(CAN1_MB17_DATA3, val) -#define bfin_read_CAN1_MB17_LENGTH() bfin_read16(CAN1_MB17_LENGTH) -#define bfin_write_CAN1_MB17_LENGTH(val) bfin_write16(CAN1_MB17_LENGTH, val) -#define bfin_read_CAN1_MB17_TIMESTAMP() bfin_read16(CAN1_MB17_TIMESTAMP) -#define bfin_write_CAN1_MB17_TIMESTAMP(val) bfin_write16(CAN1_MB17_TIMESTAMP, val) -#define bfin_read_CAN1_MB17_ID0() bfin_read16(CAN1_MB17_ID0) -#define bfin_write_CAN1_MB17_ID0(val) bfin_write16(CAN1_MB17_ID0, val) -#define bfin_read_CAN1_MB17_ID1() bfin_read16(CAN1_MB17_ID1) -#define bfin_write_CAN1_MB17_ID1(val) bfin_write16(CAN1_MB17_ID1, val) -#define bfin_read_CAN1_MB18_DATA0() bfin_read16(CAN1_MB18_DATA0) -#define bfin_write_CAN1_MB18_DATA0(val) bfin_write16(CAN1_MB18_DATA0, val) -#define bfin_read_CAN1_MB18_DATA1() bfin_read16(CAN1_MB18_DATA1) -#define bfin_write_CAN1_MB18_DATA1(val) bfin_write16(CAN1_MB18_DATA1, val) -#define bfin_read_CAN1_MB18_DATA2() bfin_read16(CAN1_MB18_DATA2) -#define bfin_write_CAN1_MB18_DATA2(val) bfin_write16(CAN1_MB18_DATA2, val) -#define bfin_read_CAN1_MB18_DATA3() bfin_read16(CAN1_MB18_DATA3) -#define bfin_write_CAN1_MB18_DATA3(val) bfin_write16(CAN1_MB18_DATA3, val) -#define bfin_read_CAN1_MB18_LENGTH() bfin_read16(CAN1_MB18_LENGTH) -#define bfin_write_CAN1_MB18_LENGTH(val) bfin_write16(CAN1_MB18_LENGTH, val) -#define bfin_read_CAN1_MB18_TIMESTAMP() bfin_read16(CAN1_MB18_TIMESTAMP) -#define bfin_write_CAN1_MB18_TIMESTAMP(val) bfin_write16(CAN1_MB18_TIMESTAMP, val) -#define bfin_read_CAN1_MB18_ID0() bfin_read16(CAN1_MB18_ID0) -#define bfin_write_CAN1_MB18_ID0(val) bfin_write16(CAN1_MB18_ID0, val) -#define bfin_read_CAN1_MB18_ID1() bfin_read16(CAN1_MB18_ID1) -#define bfin_write_CAN1_MB18_ID1(val) bfin_write16(CAN1_MB18_ID1, val) -#define bfin_read_CAN1_MB19_DATA0() bfin_read16(CAN1_MB19_DATA0) -#define bfin_write_CAN1_MB19_DATA0(val) bfin_write16(CAN1_MB19_DATA0, val) -#define bfin_read_CAN1_MB19_DATA1() bfin_read16(CAN1_MB19_DATA1) -#define bfin_write_CAN1_MB19_DATA1(val) bfin_write16(CAN1_MB19_DATA1, val) -#define bfin_read_CAN1_MB19_DATA2() bfin_read16(CAN1_MB19_DATA2) -#define bfin_write_CAN1_MB19_DATA2(val) bfin_write16(CAN1_MB19_DATA2, val) -#define bfin_read_CAN1_MB19_DATA3() bfin_read16(CAN1_MB19_DATA3) -#define bfin_write_CAN1_MB19_DATA3(val) bfin_write16(CAN1_MB19_DATA3, val) -#define bfin_read_CAN1_MB19_LENGTH() bfin_read16(CAN1_MB19_LENGTH) -#define bfin_write_CAN1_MB19_LENGTH(val) bfin_write16(CAN1_MB19_LENGTH, val) -#define bfin_read_CAN1_MB19_TIMESTAMP() bfin_read16(CAN1_MB19_TIMESTAMP) -#define bfin_write_CAN1_MB19_TIMESTAMP(val) bfin_write16(CAN1_MB19_TIMESTAMP, val) -#define bfin_read_CAN1_MB19_ID0() bfin_read16(CAN1_MB19_ID0) -#define bfin_write_CAN1_MB19_ID0(val) bfin_write16(CAN1_MB19_ID0, val) -#define bfin_read_CAN1_MB19_ID1() bfin_read16(CAN1_MB19_ID1) -#define bfin_write_CAN1_MB19_ID1(val) bfin_write16(CAN1_MB19_ID1, val) -#define bfin_read_CAN1_MB20_DATA0() bfin_read16(CAN1_MB20_DATA0) -#define bfin_write_CAN1_MB20_DATA0(val) bfin_write16(CAN1_MB20_DATA0, val) -#define bfin_read_CAN1_MB20_DATA1() bfin_read16(CAN1_MB20_DATA1) -#define bfin_write_CAN1_MB20_DATA1(val) bfin_write16(CAN1_MB20_DATA1, val) -#define bfin_read_CAN1_MB20_DATA2() bfin_read16(CAN1_MB20_DATA2) -#define bfin_write_CAN1_MB20_DATA2(val) bfin_write16(CAN1_MB20_DATA2, val) -#define bfin_read_CAN1_MB20_DATA3() bfin_read16(CAN1_MB20_DATA3) -#define bfin_write_CAN1_MB20_DATA3(val) bfin_write16(CAN1_MB20_DATA3, val) -#define bfin_read_CAN1_MB20_LENGTH() bfin_read16(CAN1_MB20_LENGTH) -#define bfin_write_CAN1_MB20_LENGTH(val) bfin_write16(CAN1_MB20_LENGTH, val) -#define bfin_read_CAN1_MB20_TIMESTAMP() bfin_read16(CAN1_MB20_TIMESTAMP) -#define bfin_write_CAN1_MB20_TIMESTAMP(val) bfin_write16(CAN1_MB20_TIMESTAMP, val) -#define bfin_read_CAN1_MB20_ID0() bfin_read16(CAN1_MB20_ID0) -#define bfin_write_CAN1_MB20_ID0(val) bfin_write16(CAN1_MB20_ID0, val) -#define bfin_read_CAN1_MB20_ID1() bfin_read16(CAN1_MB20_ID1) -#define bfin_write_CAN1_MB20_ID1(val) bfin_write16(CAN1_MB20_ID1, val) -#define bfin_read_CAN1_MB21_DATA0() bfin_read16(CAN1_MB21_DATA0) -#define bfin_write_CAN1_MB21_DATA0(val) bfin_write16(CAN1_MB21_DATA0, val) -#define bfin_read_CAN1_MB21_DATA1() bfin_read16(CAN1_MB21_DATA1) -#define bfin_write_CAN1_MB21_DATA1(val) bfin_write16(CAN1_MB21_DATA1, val) -#define bfin_read_CAN1_MB21_DATA2() bfin_read16(CAN1_MB21_DATA2) -#define bfin_write_CAN1_MB21_DATA2(val) bfin_write16(CAN1_MB21_DATA2, val) -#define bfin_read_CAN1_MB21_DATA3() bfin_read16(CAN1_MB21_DATA3) -#define bfin_write_CAN1_MB21_DATA3(val) bfin_write16(CAN1_MB21_DATA3, val) -#define bfin_read_CAN1_MB21_LENGTH() bfin_read16(CAN1_MB21_LENGTH) -#define bfin_write_CAN1_MB21_LENGTH(val) bfin_write16(CAN1_MB21_LENGTH, val) -#define bfin_read_CAN1_MB21_TIMESTAMP() bfin_read16(CAN1_MB21_TIMESTAMP) -#define bfin_write_CAN1_MB21_TIMESTAMP(val) bfin_write16(CAN1_MB21_TIMESTAMP, val) -#define bfin_read_CAN1_MB21_ID0() bfin_read16(CAN1_MB21_ID0) -#define bfin_write_CAN1_MB21_ID0(val) bfin_write16(CAN1_MB21_ID0, val) -#define bfin_read_CAN1_MB21_ID1() bfin_read16(CAN1_MB21_ID1) -#define bfin_write_CAN1_MB21_ID1(val) bfin_write16(CAN1_MB21_ID1, val) -#define bfin_read_CAN1_MB22_DATA0() bfin_read16(CAN1_MB22_DATA0) -#define bfin_write_CAN1_MB22_DATA0(val) bfin_write16(CAN1_MB22_DATA0, val) -#define bfin_read_CAN1_MB22_DATA1() bfin_read16(CAN1_MB22_DATA1) -#define bfin_write_CAN1_MB22_DATA1(val) bfin_write16(CAN1_MB22_DATA1, val) -#define bfin_read_CAN1_MB22_DATA2() bfin_read16(CAN1_MB22_DATA2) -#define bfin_write_CAN1_MB22_DATA2(val) bfin_write16(CAN1_MB22_DATA2, val) -#define bfin_read_CAN1_MB22_DATA3() bfin_read16(CAN1_MB22_DATA3) -#define bfin_write_CAN1_MB22_DATA3(val) bfin_write16(CAN1_MB22_DATA3, val) -#define bfin_read_CAN1_MB22_LENGTH() bfin_read16(CAN1_MB22_LENGTH) -#define bfin_write_CAN1_MB22_LENGTH(val) bfin_write16(CAN1_MB22_LENGTH, val) -#define bfin_read_CAN1_MB22_TIMESTAMP() bfin_read16(CAN1_MB22_TIMESTAMP) -#define bfin_write_CAN1_MB22_TIMESTAMP(val) bfin_write16(CAN1_MB22_TIMESTAMP, val) -#define bfin_read_CAN1_MB22_ID0() bfin_read16(CAN1_MB22_ID0) -#define bfin_write_CAN1_MB22_ID0(val) bfin_write16(CAN1_MB22_ID0, val) -#define bfin_read_CAN1_MB22_ID1() bfin_read16(CAN1_MB22_ID1) -#define bfin_write_CAN1_MB22_ID1(val) bfin_write16(CAN1_MB22_ID1, val) -#define bfin_read_CAN1_MB23_DATA0() bfin_read16(CAN1_MB23_DATA0) -#define bfin_write_CAN1_MB23_DATA0(val) bfin_write16(CAN1_MB23_DATA0, val) -#define bfin_read_CAN1_MB23_DATA1() bfin_read16(CAN1_MB23_DATA1) -#define bfin_write_CAN1_MB23_DATA1(val) bfin_write16(CAN1_MB23_DATA1, val) -#define bfin_read_CAN1_MB23_DATA2() bfin_read16(CAN1_MB23_DATA2) -#define bfin_write_CAN1_MB23_DATA2(val) bfin_write16(CAN1_MB23_DATA2, val) -#define bfin_read_CAN1_MB23_DATA3() bfin_read16(CAN1_MB23_DATA3) -#define bfin_write_CAN1_MB23_DATA3(val) bfin_write16(CAN1_MB23_DATA3, val) -#define bfin_read_CAN1_MB23_LENGTH() bfin_read16(CAN1_MB23_LENGTH) -#define bfin_write_CAN1_MB23_LENGTH(val) bfin_write16(CAN1_MB23_LENGTH, val) -#define bfin_read_CAN1_MB23_TIMESTAMP() bfin_read16(CAN1_MB23_TIMESTAMP) -#define bfin_write_CAN1_MB23_TIMESTAMP(val) bfin_write16(CAN1_MB23_TIMESTAMP, val) -#define bfin_read_CAN1_MB23_ID0() bfin_read16(CAN1_MB23_ID0) -#define bfin_write_CAN1_MB23_ID0(val) bfin_write16(CAN1_MB23_ID0, val) -#define bfin_read_CAN1_MB23_ID1() bfin_read16(CAN1_MB23_ID1) -#define bfin_write_CAN1_MB23_ID1(val) bfin_write16(CAN1_MB23_ID1, val) -#define bfin_read_CAN1_MB24_DATA0() bfin_read16(CAN1_MB24_DATA0) -#define bfin_write_CAN1_MB24_DATA0(val) bfin_write16(CAN1_MB24_DATA0, val) -#define bfin_read_CAN1_MB24_DATA1() bfin_read16(CAN1_MB24_DATA1) -#define bfin_write_CAN1_MB24_DATA1(val) bfin_write16(CAN1_MB24_DATA1, val) -#define bfin_read_CAN1_MB24_DATA2() bfin_read16(CAN1_MB24_DATA2) -#define bfin_write_CAN1_MB24_DATA2(val) bfin_write16(CAN1_MB24_DATA2, val) -#define bfin_read_CAN1_MB24_DATA3() bfin_read16(CAN1_MB24_DATA3) -#define bfin_write_CAN1_MB24_DATA3(val) bfin_write16(CAN1_MB24_DATA3, val) -#define bfin_read_CAN1_MB24_LENGTH() bfin_read16(CAN1_MB24_LENGTH) -#define bfin_write_CAN1_MB24_LENGTH(val) bfin_write16(CAN1_MB24_LENGTH, val) -#define bfin_read_CAN1_MB24_TIMESTAMP() bfin_read16(CAN1_MB24_TIMESTAMP) -#define bfin_write_CAN1_MB24_TIMESTAMP(val) bfin_write16(CAN1_MB24_TIMESTAMP, val) -#define bfin_read_CAN1_MB24_ID0() bfin_read16(CAN1_MB24_ID0) -#define bfin_write_CAN1_MB24_ID0(val) bfin_write16(CAN1_MB24_ID0, val) -#define bfin_read_CAN1_MB24_ID1() bfin_read16(CAN1_MB24_ID1) -#define bfin_write_CAN1_MB24_ID1(val) bfin_write16(CAN1_MB24_ID1, val) -#define bfin_read_CAN1_MB25_DATA0() bfin_read16(CAN1_MB25_DATA0) -#define bfin_write_CAN1_MB25_DATA0(val) bfin_write16(CAN1_MB25_DATA0, val) -#define bfin_read_CAN1_MB25_DATA1() bfin_read16(CAN1_MB25_DATA1) -#define bfin_write_CAN1_MB25_DATA1(val) bfin_write16(CAN1_MB25_DATA1, val) -#define bfin_read_CAN1_MB25_DATA2() bfin_read16(CAN1_MB25_DATA2) -#define bfin_write_CAN1_MB25_DATA2(val) bfin_write16(CAN1_MB25_DATA2, val) -#define bfin_read_CAN1_MB25_DATA3() bfin_read16(CAN1_MB25_DATA3) -#define bfin_write_CAN1_MB25_DATA3(val) bfin_write16(CAN1_MB25_DATA3, val) -#define bfin_read_CAN1_MB25_LENGTH() bfin_read16(CAN1_MB25_LENGTH) -#define bfin_write_CAN1_MB25_LENGTH(val) bfin_write16(CAN1_MB25_LENGTH, val) -#define bfin_read_CAN1_MB25_TIMESTAMP() bfin_read16(CAN1_MB25_TIMESTAMP) -#define bfin_write_CAN1_MB25_TIMESTAMP(val) bfin_write16(CAN1_MB25_TIMESTAMP, val) -#define bfin_read_CAN1_MB25_ID0() bfin_read16(CAN1_MB25_ID0) -#define bfin_write_CAN1_MB25_ID0(val) bfin_write16(CAN1_MB25_ID0, val) -#define bfin_read_CAN1_MB25_ID1() bfin_read16(CAN1_MB25_ID1) -#define bfin_write_CAN1_MB25_ID1(val) bfin_write16(CAN1_MB25_ID1, val) -#define bfin_read_CAN1_MB26_DATA0() bfin_read16(CAN1_MB26_DATA0) -#define bfin_write_CAN1_MB26_DATA0(val) bfin_write16(CAN1_MB26_DATA0, val) -#define bfin_read_CAN1_MB26_DATA1() bfin_read16(CAN1_MB26_DATA1) -#define bfin_write_CAN1_MB26_DATA1(val) bfin_write16(CAN1_MB26_DATA1, val) -#define bfin_read_CAN1_MB26_DATA2() bfin_read16(CAN1_MB26_DATA2) -#define bfin_write_CAN1_MB26_DATA2(val) bfin_write16(CAN1_MB26_DATA2, val) -#define bfin_read_CAN1_MB26_DATA3() bfin_read16(CAN1_MB26_DATA3) -#define bfin_write_CAN1_MB26_DATA3(val) bfin_write16(CAN1_MB26_DATA3, val) -#define bfin_read_CAN1_MB26_LENGTH() bfin_read16(CAN1_MB26_LENGTH) -#define bfin_write_CAN1_MB26_LENGTH(val) bfin_write16(CAN1_MB26_LENGTH, val) -#define bfin_read_CAN1_MB26_TIMESTAMP() bfin_read16(CAN1_MB26_TIMESTAMP) -#define bfin_write_CAN1_MB26_TIMESTAMP(val) bfin_write16(CAN1_MB26_TIMESTAMP, val) -#define bfin_read_CAN1_MB26_ID0() bfin_read16(CAN1_MB26_ID0) -#define bfin_write_CAN1_MB26_ID0(val) bfin_write16(CAN1_MB26_ID0, val) -#define bfin_read_CAN1_MB26_ID1() bfin_read16(CAN1_MB26_ID1) -#define bfin_write_CAN1_MB26_ID1(val) bfin_write16(CAN1_MB26_ID1, val) -#define bfin_read_CAN1_MB27_DATA0() bfin_read16(CAN1_MB27_DATA0) -#define bfin_write_CAN1_MB27_DATA0(val) bfin_write16(CAN1_MB27_DATA0, val) -#define bfin_read_CAN1_MB27_DATA1() bfin_read16(CAN1_MB27_DATA1) -#define bfin_write_CAN1_MB27_DATA1(val) bfin_write16(CAN1_MB27_DATA1, val) -#define bfin_read_CAN1_MB27_DATA2() bfin_read16(CAN1_MB27_DATA2) -#define bfin_write_CAN1_MB27_DATA2(val) bfin_write16(CAN1_MB27_DATA2, val) -#define bfin_read_CAN1_MB27_DATA3() bfin_read16(CAN1_MB27_DATA3) -#define bfin_write_CAN1_MB27_DATA3(val) bfin_write16(CAN1_MB27_DATA3, val) -#define bfin_read_CAN1_MB27_LENGTH() bfin_read16(CAN1_MB27_LENGTH) -#define bfin_write_CAN1_MB27_LENGTH(val) bfin_write16(CAN1_MB27_LENGTH, val) -#define bfin_read_CAN1_MB27_TIMESTAMP() bfin_read16(CAN1_MB27_TIMESTAMP) -#define bfin_write_CAN1_MB27_TIMESTAMP(val) bfin_write16(CAN1_MB27_TIMESTAMP, val) -#define bfin_read_CAN1_MB27_ID0() bfin_read16(CAN1_MB27_ID0) -#define bfin_write_CAN1_MB27_ID0(val) bfin_write16(CAN1_MB27_ID0, val) -#define bfin_read_CAN1_MB27_ID1() bfin_read16(CAN1_MB27_ID1) -#define bfin_write_CAN1_MB27_ID1(val) bfin_write16(CAN1_MB27_ID1, val) -#define bfin_read_CAN1_MB28_DATA0() bfin_read16(CAN1_MB28_DATA0) -#define bfin_write_CAN1_MB28_DATA0(val) bfin_write16(CAN1_MB28_DATA0, val) -#define bfin_read_CAN1_MB28_DATA1() bfin_read16(CAN1_MB28_DATA1) -#define bfin_write_CAN1_MB28_DATA1(val) bfin_write16(CAN1_MB28_DATA1, val) -#define bfin_read_CAN1_MB28_DATA2() bfin_read16(CAN1_MB28_DATA2) -#define bfin_write_CAN1_MB28_DATA2(val) bfin_write16(CAN1_MB28_DATA2, val) -#define bfin_read_CAN1_MB28_DATA3() bfin_read16(CAN1_MB28_DATA3) -#define bfin_write_CAN1_MB28_DATA3(val) bfin_write16(CAN1_MB28_DATA3, val) -#define bfin_read_CAN1_MB28_LENGTH() bfin_read16(CAN1_MB28_LENGTH) -#define bfin_write_CAN1_MB28_LENGTH(val) bfin_write16(CAN1_MB28_LENGTH, val) -#define bfin_read_CAN1_MB28_TIMESTAMP() bfin_read16(CAN1_MB28_TIMESTAMP) -#define bfin_write_CAN1_MB28_TIMESTAMP(val) bfin_write16(CAN1_MB28_TIMESTAMP, val) -#define bfin_read_CAN1_MB28_ID0() bfin_read16(CAN1_MB28_ID0) -#define bfin_write_CAN1_MB28_ID0(val) bfin_write16(CAN1_MB28_ID0, val) -#define bfin_read_CAN1_MB28_ID1() bfin_read16(CAN1_MB28_ID1) -#define bfin_write_CAN1_MB28_ID1(val) bfin_write16(CAN1_MB28_ID1, val) -#define bfin_read_CAN1_MB29_DATA0() bfin_read16(CAN1_MB29_DATA0) -#define bfin_write_CAN1_MB29_DATA0(val) bfin_write16(CAN1_MB29_DATA0, val) -#define bfin_read_CAN1_MB29_DATA1() bfin_read16(CAN1_MB29_DATA1) -#define bfin_write_CAN1_MB29_DATA1(val) bfin_write16(CAN1_MB29_DATA1, val) -#define bfin_read_CAN1_MB29_DATA2() bfin_read16(CAN1_MB29_DATA2) -#define bfin_write_CAN1_MB29_DATA2(val) bfin_write16(CAN1_MB29_DATA2, val) -#define bfin_read_CAN1_MB29_DATA3() bfin_read16(CAN1_MB29_DATA3) -#define bfin_write_CAN1_MB29_DATA3(val) bfin_write16(CAN1_MB29_DATA3, val) -#define bfin_read_CAN1_MB29_LENGTH() bfin_read16(CAN1_MB29_LENGTH) -#define bfin_write_CAN1_MB29_LENGTH(val) bfin_write16(CAN1_MB29_LENGTH, val) -#define bfin_read_CAN1_MB29_TIMESTAMP() bfin_read16(CAN1_MB29_TIMESTAMP) -#define bfin_write_CAN1_MB29_TIMESTAMP(val) bfin_write16(CAN1_MB29_TIMESTAMP, val) -#define bfin_read_CAN1_MB29_ID0() bfin_read16(CAN1_MB29_ID0) -#define bfin_write_CAN1_MB29_ID0(val) bfin_write16(CAN1_MB29_ID0, val) -#define bfin_read_CAN1_MB29_ID1() bfin_read16(CAN1_MB29_ID1) -#define bfin_write_CAN1_MB29_ID1(val) bfin_write16(CAN1_MB29_ID1, val) -#define bfin_read_CAN1_MB30_DATA0() bfin_read16(CAN1_MB30_DATA0) -#define bfin_write_CAN1_MB30_DATA0(val) bfin_write16(CAN1_MB30_DATA0, val) -#define bfin_read_CAN1_MB30_DATA1() bfin_read16(CAN1_MB30_DATA1) -#define bfin_write_CAN1_MB30_DATA1(val) bfin_write16(CAN1_MB30_DATA1, val) -#define bfin_read_CAN1_MB30_DATA2() bfin_read16(CAN1_MB30_DATA2) -#define bfin_write_CAN1_MB30_DATA2(val) bfin_write16(CAN1_MB30_DATA2, val) -#define bfin_read_CAN1_MB30_DATA3() bfin_read16(CAN1_MB30_DATA3) -#define bfin_write_CAN1_MB30_DATA3(val) bfin_write16(CAN1_MB30_DATA3, val) -#define bfin_read_CAN1_MB30_LENGTH() bfin_read16(CAN1_MB30_LENGTH) -#define bfin_write_CAN1_MB30_LENGTH(val) bfin_write16(CAN1_MB30_LENGTH, val) -#define bfin_read_CAN1_MB30_TIMESTAMP() bfin_read16(CAN1_MB30_TIMESTAMP) -#define bfin_write_CAN1_MB30_TIMESTAMP(val) bfin_write16(CAN1_MB30_TIMESTAMP, val) -#define bfin_read_CAN1_MB30_ID0() bfin_read16(CAN1_MB30_ID0) -#define bfin_write_CAN1_MB30_ID0(val) bfin_write16(CAN1_MB30_ID0, val) -#define bfin_read_CAN1_MB30_ID1() bfin_read16(CAN1_MB30_ID1) -#define bfin_write_CAN1_MB30_ID1(val) bfin_write16(CAN1_MB30_ID1, val) -#define bfin_read_CAN1_MB31_DATA0() bfin_read16(CAN1_MB31_DATA0) -#define bfin_write_CAN1_MB31_DATA0(val) bfin_write16(CAN1_MB31_DATA0, val) -#define bfin_read_CAN1_MB31_DATA1() bfin_read16(CAN1_MB31_DATA1) -#define bfin_write_CAN1_MB31_DATA1(val) bfin_write16(CAN1_MB31_DATA1, val) -#define bfin_read_CAN1_MB31_DATA2() bfin_read16(CAN1_MB31_DATA2) -#define bfin_write_CAN1_MB31_DATA2(val) bfin_write16(CAN1_MB31_DATA2, val) -#define bfin_read_CAN1_MB31_DATA3() bfin_read16(CAN1_MB31_DATA3) -#define bfin_write_CAN1_MB31_DATA3(val) bfin_write16(CAN1_MB31_DATA3, val) -#define bfin_read_CAN1_MB31_LENGTH() bfin_read16(CAN1_MB31_LENGTH) -#define bfin_write_CAN1_MB31_LENGTH(val) bfin_write16(CAN1_MB31_LENGTH, val) -#define bfin_read_CAN1_MB31_TIMESTAMP() bfin_read16(CAN1_MB31_TIMESTAMP) -#define bfin_write_CAN1_MB31_TIMESTAMP(val) bfin_write16(CAN1_MB31_TIMESTAMP, val) -#define bfin_read_CAN1_MB31_ID0() bfin_read16(CAN1_MB31_ID0) -#define bfin_write_CAN1_MB31_ID0(val) bfin_write16(CAN1_MB31_ID0, val) -#define bfin_read_CAN1_MB31_ID1() bfin_read16(CAN1_MB31_ID1) -#define bfin_write_CAN1_MB31_ID1(val) bfin_write16(CAN1_MB31_ID1, val) - -/* ATAPI Registers */ - -#define bfin_read_ATAPI_CONTROL() bfin_read16(ATAPI_CONTROL) -#define bfin_write_ATAPI_CONTROL(val) bfin_write16(ATAPI_CONTROL, val) -#define bfin_read_ATAPI_STATUS() bfin_read16(ATAPI_STATUS) -#define bfin_write_ATAPI_STATUS(val) bfin_write16(ATAPI_STATUS, val) -#define bfin_read_ATAPI_DEV_ADDR() bfin_read16(ATAPI_DEV_ADDR) -#define bfin_write_ATAPI_DEV_ADDR(val) bfin_write16(ATAPI_DEV_ADDR, val) -#define bfin_read_ATAPI_DEV_TXBUF() bfin_read16(ATAPI_DEV_TXBUF) -#define bfin_write_ATAPI_DEV_TXBUF(val) bfin_write16(ATAPI_DEV_TXBUF, val) -#define bfin_read_ATAPI_DEV_RXBUF() bfin_read16(ATAPI_DEV_RXBUF) -#define bfin_write_ATAPI_DEV_RXBUF(val) bfin_write16(ATAPI_DEV_RXBUF, val) -#define bfin_read_ATAPI_INT_MASK() bfin_read16(ATAPI_INT_MASK) -#define bfin_write_ATAPI_INT_MASK(val) bfin_write16(ATAPI_INT_MASK, val) -#define bfin_read_ATAPI_INT_STATUS() bfin_read16(ATAPI_INT_STATUS) -#define bfin_write_ATAPI_INT_STATUS(val) bfin_write16(ATAPI_INT_STATUS, val) -#define bfin_read_ATAPI_XFER_LEN() bfin_read16(ATAPI_XFER_LEN) -#define bfin_write_ATAPI_XFER_LEN(val) bfin_write16(ATAPI_XFER_LEN, val) -#define bfin_read_ATAPI_LINE_STATUS() bfin_read16(ATAPI_LINE_STATUS) -#define bfin_write_ATAPI_LINE_STATUS(val) bfin_write16(ATAPI_LINE_STATUS, val) -#define bfin_read_ATAPI_SM_STATE() bfin_read16(ATAPI_SM_STATE) -#define bfin_write_ATAPI_SM_STATE(val) bfin_write16(ATAPI_SM_STATE, val) -#define bfin_read_ATAPI_TERMINATE() bfin_read16(ATAPI_TERMINATE) -#define bfin_write_ATAPI_TERMINATE(val) bfin_write16(ATAPI_TERMINATE, val) -#define bfin_read_ATAPI_PIO_TFRCNT() bfin_read16(ATAPI_PIO_TFRCNT) -#define bfin_write_ATAPI_PIO_TFRCNT(val) bfin_write16(ATAPI_PIO_TFRCNT, val) -#define bfin_read_ATAPI_DMA_TFRCNT() bfin_read16(ATAPI_DMA_TFRCNT) -#define bfin_write_ATAPI_DMA_TFRCNT(val) bfin_write16(ATAPI_DMA_TFRCNT, val) -#define bfin_read_ATAPI_UMAIN_TFRCNT() bfin_read16(ATAPI_UMAIN_TFRCNT) -#define bfin_write_ATAPI_UMAIN_TFRCNT(val) bfin_write16(ATAPI_UMAIN_TFRCNT, val) -#define bfin_read_ATAPI_UDMAOUT_TFRCNT() bfin_read16(ATAPI_UDMAOUT_TFRCNT) -#define bfin_write_ATAPI_UDMAOUT_TFRCNT(val) bfin_write16(ATAPI_UDMAOUT_TFRCNT, val) -#define bfin_read_ATAPI_REG_TIM_0() bfin_read16(ATAPI_REG_TIM_0) -#define bfin_write_ATAPI_REG_TIM_0(val) bfin_write16(ATAPI_REG_TIM_0, val) -#define bfin_read_ATAPI_PIO_TIM_0() bfin_read16(ATAPI_PIO_TIM_0) -#define bfin_write_ATAPI_PIO_TIM_0(val) bfin_write16(ATAPI_PIO_TIM_0, val) -#define bfin_read_ATAPI_PIO_TIM_1() bfin_read16(ATAPI_PIO_TIM_1) -#define bfin_write_ATAPI_PIO_TIM_1(val) bfin_write16(ATAPI_PIO_TIM_1, val) -#define bfin_read_ATAPI_MULTI_TIM_0() bfin_read16(ATAPI_MULTI_TIM_0) -#define bfin_write_ATAPI_MULTI_TIM_0(val) bfin_write16(ATAPI_MULTI_TIM_0, val) -#define bfin_read_ATAPI_MULTI_TIM_1() bfin_read16(ATAPI_MULTI_TIM_1) -#define bfin_write_ATAPI_MULTI_TIM_1(val) bfin_write16(ATAPI_MULTI_TIM_1, val) -#define bfin_read_ATAPI_MULTI_TIM_2() bfin_read16(ATAPI_MULTI_TIM_2) -#define bfin_write_ATAPI_MULTI_TIM_2(val) bfin_write16(ATAPI_MULTI_TIM_2, val) -#define bfin_read_ATAPI_ULTRA_TIM_0() bfin_read16(ATAPI_ULTRA_TIM_0) -#define bfin_write_ATAPI_ULTRA_TIM_0(val) bfin_write16(ATAPI_ULTRA_TIM_0, val) -#define bfin_read_ATAPI_ULTRA_TIM_1() bfin_read16(ATAPI_ULTRA_TIM_1) -#define bfin_write_ATAPI_ULTRA_TIM_1(val) bfin_write16(ATAPI_ULTRA_TIM_1, val) -#define bfin_read_ATAPI_ULTRA_TIM_2() bfin_read16(ATAPI_ULTRA_TIM_2) -#define bfin_write_ATAPI_ULTRA_TIM_2(val) bfin_write16(ATAPI_ULTRA_TIM_2, val) -#define bfin_read_ATAPI_ULTRA_TIM_3() bfin_read16(ATAPI_ULTRA_TIM_3) -#define bfin_write_ATAPI_ULTRA_TIM_3(val) bfin_write16(ATAPI_ULTRA_TIM_3, val) - -/* SDH Registers */ - -#define bfin_read_SDH_PWR_CTL() bfin_read16(SDH_PWR_CTL) -#define bfin_write_SDH_PWR_CTL(val) bfin_write16(SDH_PWR_CTL, val) -#define bfin_read_SDH_CLK_CTL() bfin_read16(SDH_CLK_CTL) -#define bfin_write_SDH_CLK_CTL(val) bfin_write16(SDH_CLK_CTL, val) -#define bfin_read_SDH_ARGUMENT() bfin_read32(SDH_ARGUMENT) -#define bfin_write_SDH_ARGUMENT(val) bfin_write32(SDH_ARGUMENT, val) -#define bfin_read_SDH_COMMAND() bfin_read16(SDH_COMMAND) -#define bfin_write_SDH_COMMAND(val) bfin_write16(SDH_COMMAND, val) -#define bfin_read_SDH_RESP_CMD() bfin_read16(SDH_RESP_CMD) -#define bfin_write_SDH_RESP_CMD(val) bfin_write16(SDH_RESP_CMD, val) -#define bfin_read_SDH_RESPONSE0() bfin_read32(SDH_RESPONSE0) -#define bfin_write_SDH_RESPONSE0(val) bfin_write32(SDH_RESPONSE0, val) -#define bfin_read_SDH_RESPONSE1() bfin_read32(SDH_RESPONSE1) -#define bfin_write_SDH_RESPONSE1(val) bfin_write32(SDH_RESPONSE1, val) -#define bfin_read_SDH_RESPONSE2() bfin_read32(SDH_RESPONSE2) -#define bfin_write_SDH_RESPONSE2(val) bfin_write32(SDH_RESPONSE2, val) -#define bfin_read_SDH_RESPONSE3() bfin_read32(SDH_RESPONSE3) -#define bfin_write_SDH_RESPONSE3(val) bfin_write32(SDH_RESPONSE3, val) -#define bfin_read_SDH_DATA_TIMER() bfin_read32(SDH_DATA_TIMER) -#define bfin_write_SDH_DATA_TIMER(val) bfin_write32(SDH_DATA_TIMER, val) -#define bfin_read_SDH_DATA_LGTH() bfin_read16(SDH_DATA_LGTH) -#define bfin_write_SDH_DATA_LGTH(val) bfin_write16(SDH_DATA_LGTH, val) -#define bfin_read_SDH_DATA_CTL() bfin_read16(SDH_DATA_CTL) -#define bfin_write_SDH_DATA_CTL(val) bfin_write16(SDH_DATA_CTL, val) -#define bfin_read_SDH_DATA_CNT() bfin_read16(SDH_DATA_CNT) -#define bfin_write_SDH_DATA_CNT(val) bfin_write16(SDH_DATA_CNT, val) -#define bfin_read_SDH_STATUS() bfin_read32(SDH_STATUS) -#define bfin_write_SDH_STATUS(val) bfin_write32(SDH_STATUS, val) -#define bfin_read_SDH_STATUS_CLR() bfin_read16(SDH_STATUS_CLR) -#define bfin_write_SDH_STATUS_CLR(val) bfin_write16(SDH_STATUS_CLR, val) -#define bfin_read_SDH_MASK0() bfin_read32(SDH_MASK0) -#define bfin_write_SDH_MASK0(val) bfin_write32(SDH_MASK0, val) -#define bfin_read_SDH_MASK1() bfin_read32(SDH_MASK1) -#define bfin_write_SDH_MASK1(val) bfin_write32(SDH_MASK1, val) -#define bfin_read_SDH_FIFO_CNT() bfin_read16(SDH_FIFO_CNT) -#define bfin_write_SDH_FIFO_CNT(val) bfin_write16(SDH_FIFO_CNT, val) -#define bfin_read_SDH_FIFO() bfin_read32(SDH_FIFO) -#define bfin_write_SDH_FIFO(val) bfin_write32(SDH_FIFO, val) -#define bfin_read_SDH_E_STATUS() bfin_read16(SDH_E_STATUS) -#define bfin_write_SDH_E_STATUS(val) bfin_write16(SDH_E_STATUS, val) -#define bfin_read_SDH_E_MASK() bfin_read16(SDH_E_MASK) -#define bfin_write_SDH_E_MASK(val) bfin_write16(SDH_E_MASK, val) -#define bfin_read_SDH_CFG() bfin_read16(SDH_CFG) -#define bfin_write_SDH_CFG(val) bfin_write16(SDH_CFG, val) -#define bfin_read_SDH_RD_WAIT_EN() bfin_read16(SDH_RD_WAIT_EN) -#define bfin_write_SDH_RD_WAIT_EN(val) bfin_write16(SDH_RD_WAIT_EN, val) -#define bfin_read_SDH_PID0() bfin_read16(SDH_PID0) -#define bfin_write_SDH_PID0(val) bfin_write16(SDH_PID0, val) -#define bfin_read_SDH_PID1() bfin_read16(SDH_PID1) -#define bfin_write_SDH_PID1(val) bfin_write16(SDH_PID1, val) -#define bfin_read_SDH_PID2() bfin_read16(SDH_PID2) -#define bfin_write_SDH_PID2(val) bfin_write16(SDH_PID2, val) -#define bfin_read_SDH_PID3() bfin_read16(SDH_PID3) -#define bfin_write_SDH_PID3(val) bfin_write16(SDH_PID3, val) -#define bfin_read_SDH_PID4() bfin_read16(SDH_PID4) -#define bfin_write_SDH_PID4(val) bfin_write16(SDH_PID4, val) -#define bfin_read_SDH_PID5() bfin_read16(SDH_PID5) -#define bfin_write_SDH_PID5(val) bfin_write16(SDH_PID5, val) -#define bfin_read_SDH_PID6() bfin_read16(SDH_PID6) -#define bfin_write_SDH_PID6(val) bfin_write16(SDH_PID6, val) -#define bfin_read_SDH_PID7() bfin_read16(SDH_PID7) -#define bfin_write_SDH_PID7(val) bfin_write16(SDH_PID7, val) - -/* HOST Port Registers */ - -#define bfin_read_HOST_CONTROL() bfin_read16(HOST_CONTROL) -#define bfin_write_HOST_CONTROL(val) bfin_write16(HOST_CONTROL, val) -#define bfin_read_HOST_STATUS() bfin_read16(HOST_STATUS) -#define bfin_write_HOST_STATUS(val) bfin_write16(HOST_STATUS, val) -#define bfin_read_HOST_TIMEOUT() bfin_read16(HOST_TIMEOUT) -#define bfin_write_HOST_TIMEOUT(val) bfin_write16(HOST_TIMEOUT, val) - -/* USB Control Registers */ - -#define bfin_read_USB_FADDR() bfin_read16(USB_FADDR) -#define bfin_write_USB_FADDR(val) bfin_write16(USB_FADDR, val) -#define bfin_read_USB_POWER() bfin_read16(USB_POWER) -#define bfin_write_USB_POWER(val) bfin_write16(USB_POWER, val) -#define bfin_read_USB_INTRTX() bfin_read16(USB_INTRTX) -#define bfin_write_USB_INTRTX(val) bfin_write16(USB_INTRTX, val) -#define bfin_read_USB_INTRRX() bfin_read16(USB_INTRRX) -#define bfin_write_USB_INTRRX(val) bfin_write16(USB_INTRRX, val) -#define bfin_read_USB_INTRTXE() bfin_read16(USB_INTRTXE) -#define bfin_write_USB_INTRTXE(val) bfin_write16(USB_INTRTXE, val) -#define bfin_read_USB_INTRRXE() bfin_read16(USB_INTRRXE) -#define bfin_write_USB_INTRRXE(val) bfin_write16(USB_INTRRXE, val) -#define bfin_read_USB_INTRUSB() bfin_read16(USB_INTRUSB) -#define bfin_write_USB_INTRUSB(val) bfin_write16(USB_INTRUSB, val) -#define bfin_read_USB_INTRUSBE() bfin_read16(USB_INTRUSBE) -#define bfin_write_USB_INTRUSBE(val) bfin_write16(USB_INTRUSBE, val) -#define bfin_read_USB_FRAME() bfin_read16(USB_FRAME) -#define bfin_write_USB_FRAME(val) bfin_write16(USB_FRAME, val) -#define bfin_read_USB_INDEX() bfin_read16(USB_INDEX) -#define bfin_write_USB_INDEX(val) bfin_write16(USB_INDEX, val) -#define bfin_read_USB_TESTMODE() bfin_read16(USB_TESTMODE) -#define bfin_write_USB_TESTMODE(val) bfin_write16(USB_TESTMODE, val) -#define bfin_read_USB_GLOBINTR() bfin_read16(USB_GLOBINTR) -#define bfin_write_USB_GLOBINTR(val) bfin_write16(USB_GLOBINTR, val) -#define bfin_read_USB_GLOBAL_CTL() bfin_read16(USB_GLOBAL_CTL) -#define bfin_write_USB_GLOBAL_CTL(val) bfin_write16(USB_GLOBAL_CTL, val) - -/* USB Packet Control Registers */ - -#define bfin_read_USB_TX_MAX_PACKET() bfin_read16(USB_TX_MAX_PACKET) -#define bfin_write_USB_TX_MAX_PACKET(val) bfin_write16(USB_TX_MAX_PACKET, val) -#define bfin_read_USB_CSR0() bfin_read16(USB_CSR0) -#define bfin_write_USB_CSR0(val) bfin_write16(USB_CSR0, val) -#define bfin_read_USB_TXCSR() bfin_read16(USB_TXCSR) -#define bfin_write_USB_TXCSR(val) bfin_write16(USB_TXCSR, val) -#define bfin_read_USB_RX_MAX_PACKET() bfin_read16(USB_RX_MAX_PACKET) -#define bfin_write_USB_RX_MAX_PACKET(val) bfin_write16(USB_RX_MAX_PACKET, val) -#define bfin_read_USB_RXCSR() bfin_read16(USB_RXCSR) -#define bfin_write_USB_RXCSR(val) bfin_write16(USB_RXCSR, val) -#define bfin_read_USB_COUNT0() bfin_read16(USB_COUNT0) -#define bfin_write_USB_COUNT0(val) bfin_write16(USB_COUNT0, val) -#define bfin_read_USB_RXCOUNT() bfin_read16(USB_RXCOUNT) -#define bfin_write_USB_RXCOUNT(val) bfin_write16(USB_RXCOUNT, val) -#define bfin_read_USB_TXTYPE() bfin_read16(USB_TXTYPE) -#define bfin_write_USB_TXTYPE(val) bfin_write16(USB_TXTYPE, val) -#define bfin_read_USB_NAKLIMIT0() bfin_read16(USB_NAKLIMIT0) -#define bfin_write_USB_NAKLIMIT0(val) bfin_write16(USB_NAKLIMIT0, val) -#define bfin_read_USB_TXINTERVAL() bfin_read16(USB_TXINTERVAL) -#define bfin_write_USB_TXINTERVAL(val) bfin_write16(USB_TXINTERVAL, val) -#define bfin_read_USB_RXTYPE() bfin_read16(USB_RXTYPE) -#define bfin_write_USB_RXTYPE(val) bfin_write16(USB_RXTYPE, val) -#define bfin_read_USB_RXINTERVAL() bfin_read16(USB_RXINTERVAL) -#define bfin_write_USB_RXINTERVAL(val) bfin_write16(USB_RXINTERVAL, val) -#define bfin_read_USB_TXCOUNT() bfin_read16(USB_TXCOUNT) -#define bfin_write_USB_TXCOUNT(val) bfin_write16(USB_TXCOUNT, val) - -/* USB Endbfin_read_()oint FIFO Registers */ - -#define bfin_read_USB_EP0_FIFO() bfin_read16(USB_EP0_FIFO) -#define bfin_write_USB_EP0_FIFO(val) bfin_write16(USB_EP0_FIFO, val) -#define bfin_read_USB_EP1_FIFO() bfin_read16(USB_EP1_FIFO) -#define bfin_write_USB_EP1_FIFO(val) bfin_write16(USB_EP1_FIFO, val) -#define bfin_read_USB_EP2_FIFO() bfin_read16(USB_EP2_FIFO) -#define bfin_write_USB_EP2_FIFO(val) bfin_write16(USB_EP2_FIFO, val) -#define bfin_read_USB_EP3_FIFO() bfin_read16(USB_EP3_FIFO) -#define bfin_write_USB_EP3_FIFO(val) bfin_write16(USB_EP3_FIFO, val) -#define bfin_read_USB_EP4_FIFO() bfin_read16(USB_EP4_FIFO) -#define bfin_write_USB_EP4_FIFO(val) bfin_write16(USB_EP4_FIFO, val) -#define bfin_read_USB_EP5_FIFO() bfin_read16(USB_EP5_FIFO) -#define bfin_write_USB_EP5_FIFO(val) bfin_write16(USB_EP5_FIFO, val) -#define bfin_read_USB_EP6_FIFO() bfin_read16(USB_EP6_FIFO) -#define bfin_write_USB_EP6_FIFO(val) bfin_write16(USB_EP6_FIFO, val) -#define bfin_read_USB_EP7_FIFO() bfin_read16(USB_EP7_FIFO) -#define bfin_write_USB_EP7_FIFO(val) bfin_write16(USB_EP7_FIFO, val) - -/* USB OTG Control Registers */ - -#define bfin_read_USB_OTG_DEV_CTL() bfin_read16(USB_OTG_DEV_CTL) -#define bfin_write_USB_OTG_DEV_CTL(val) bfin_write16(USB_OTG_DEV_CTL, val) -#define bfin_read_USB_OTG_VBUS_IRQ() bfin_read16(USB_OTG_VBUS_IRQ) -#define bfin_write_USB_OTG_VBUS_IRQ(val) bfin_write16(USB_OTG_VBUS_IRQ, val) -#define bfin_read_USB_OTG_VBUS_MASK() bfin_read16(USB_OTG_VBUS_MASK) -#define bfin_write_USB_OTG_VBUS_MASK(val) bfin_write16(USB_OTG_VBUS_MASK, val) - -/* USB Phy Control Registers */ - -#define bfin_read_USB_LINKINFO() bfin_read16(USB_LINKINFO) -#define bfin_write_USB_LINKINFO(val) bfin_write16(USB_LINKINFO, val) -#define bfin_read_USB_VPLEN() bfin_read16(USB_VPLEN) -#define bfin_write_USB_VPLEN(val) bfin_write16(USB_VPLEN, val) -#define bfin_read_USB_HS_EOF1() bfin_read16(USB_HS_EOF1) -#define bfin_write_USB_HS_EOF1(val) bfin_write16(USB_HS_EOF1, val) -#define bfin_read_USB_FS_EOF1() bfin_read16(USB_FS_EOF1) -#define bfin_write_USB_FS_EOF1(val) bfin_write16(USB_FS_EOF1, val) -#define bfin_read_USB_LS_EOF1() bfin_read16(USB_LS_EOF1) -#define bfin_write_USB_LS_EOF1(val) bfin_write16(USB_LS_EOF1, val) - -/* (APHY_CNTRL is for ADI usage only) */ - -#define bfin_read_USB_APHY_CNTRL() bfin_read16(USB_APHY_CNTRL) -#define bfin_write_USB_APHY_CNTRL(val) bfin_write16(USB_APHY_CNTRL, val) - -/* (APHY_CALIB is for ADI usage only) */ - -#define bfin_read_USB_APHY_CALIB() bfin_read16(USB_APHY_CALIB) -#define bfin_write_USB_APHY_CALIB(val) bfin_write16(USB_APHY_CALIB, val) -#define bfin_read_USB_APHY_CNTRL2() bfin_read16(USB_APHY_CNTRL2) -#define bfin_write_USB_APHY_CNTRL2(val) bfin_write16(USB_APHY_CNTRL2, val) - -/* (PHY_TEST is for ADI usage only) */ - -#define bfin_read_USB_PHY_TEST() bfin_read16(USB_PHY_TEST) -#define bfin_write_USB_PHY_TEST(val) bfin_write16(USB_PHY_TEST, val) -#define bfin_read_USB_PLLOSC_CTRL() bfin_read16(USB_PLLOSC_CTRL) -#define bfin_write_USB_PLLOSC_CTRL(val) bfin_write16(USB_PLLOSC_CTRL, val) -#define bfin_read_USB_SRP_CLKDIV() bfin_read16(USB_SRP_CLKDIV) -#define bfin_write_USB_SRP_CLKDIV(val) bfin_write16(USB_SRP_CLKDIV, val) - -/* USB Endbfin_read_()oint 0 Control Registers */ - -#define bfin_read_USB_EP_NI0_TXMAXP() bfin_read16(USB_EP_NI0_TXMAXP) -#define bfin_write_USB_EP_NI0_TXMAXP(val) bfin_write16(USB_EP_NI0_TXMAXP, val) -#define bfin_read_USB_EP_NI0_TXCSR() bfin_read16(USB_EP_NI0_TXCSR) -#define bfin_write_USB_EP_NI0_TXCSR(val) bfin_write16(USB_EP_NI0_TXCSR, val) -#define bfin_read_USB_EP_NI0_RXMAXP() bfin_read16(USB_EP_NI0_RXMAXP) -#define bfin_write_USB_EP_NI0_RXMAXP(val) bfin_write16(USB_EP_NI0_RXMAXP, val) -#define bfin_read_USB_EP_NI0_RXCSR() bfin_read16(USB_EP_NI0_RXCSR) -#define bfin_write_USB_EP_NI0_RXCSR(val) bfin_write16(USB_EP_NI0_RXCSR, val) -#define bfin_read_USB_EP_NI0_RXCOUNT() bfin_read16(USB_EP_NI0_RXCOUNT) -#define bfin_write_USB_EP_NI0_RXCOUNT(val) bfin_write16(USB_EP_NI0_RXCOUNT, val) -#define bfin_read_USB_EP_NI0_TXTYPE() bfin_read16(USB_EP_NI0_TXTYPE) -#define bfin_write_USB_EP_NI0_TXTYPE(val) bfin_write16(USB_EP_NI0_TXTYPE, val) -#define bfin_read_USB_EP_NI0_TXINTERVAL() bfin_read16(USB_EP_NI0_TXINTERVAL) -#define bfin_write_USB_EP_NI0_TXINTERVAL(val) bfin_write16(USB_EP_NI0_TXINTERVAL, val) -#define bfin_read_USB_EP_NI0_RXTYPE() bfin_read16(USB_EP_NI0_RXTYPE) -#define bfin_write_USB_EP_NI0_RXTYPE(val) bfin_write16(USB_EP_NI0_RXTYPE, val) -#define bfin_read_USB_EP_NI0_RXINTERVAL() bfin_read16(USB_EP_NI0_RXINTERVAL) -#define bfin_write_USB_EP_NI0_RXINTERVAL(val) bfin_write16(USB_EP_NI0_RXINTERVAL, val) - -/* USB Endbfin_read_()oint 1 Control Registers */ - -#define bfin_read_USB_EP_NI0_TXCOUNT() bfin_read16(USB_EP_NI0_TXCOUNT) -#define bfin_write_USB_EP_NI0_TXCOUNT(val) bfin_write16(USB_EP_NI0_TXCOUNT, val) -#define bfin_read_USB_EP_NI1_TXMAXP() bfin_read16(USB_EP_NI1_TXMAXP) -#define bfin_write_USB_EP_NI1_TXMAXP(val) bfin_write16(USB_EP_NI1_TXMAXP, val) -#define bfin_read_USB_EP_NI1_TXCSR() bfin_read16(USB_EP_NI1_TXCSR) -#define bfin_write_USB_EP_NI1_TXCSR(val) bfin_write16(USB_EP_NI1_TXCSR, val) -#define bfin_read_USB_EP_NI1_RXMAXP() bfin_read16(USB_EP_NI1_RXMAXP) -#define bfin_write_USB_EP_NI1_RXMAXP(val) bfin_write16(USB_EP_NI1_RXMAXP, val) -#define bfin_read_USB_EP_NI1_RXCSR() bfin_read16(USB_EP_NI1_RXCSR) -#define bfin_write_USB_EP_NI1_RXCSR(val) bfin_write16(USB_EP_NI1_RXCSR, val) -#define bfin_read_USB_EP_NI1_RXCOUNT() bfin_read16(USB_EP_NI1_RXCOUNT) -#define bfin_write_USB_EP_NI1_RXCOUNT(val) bfin_write16(USB_EP_NI1_RXCOUNT, val) -#define bfin_read_USB_EP_NI1_TXTYPE() bfin_read16(USB_EP_NI1_TXTYPE) -#define bfin_write_USB_EP_NI1_TXTYPE(val) bfin_write16(USB_EP_NI1_TXTYPE, val) -#define bfin_read_USB_EP_NI1_TXINTERVAL() bfin_read16(USB_EP_NI1_TXINTERVAL) -#define bfin_write_USB_EP_NI1_TXINTERVAL(val) bfin_write16(USB_EP_NI1_TXINTERVAL, val) -#define bfin_read_USB_EP_NI1_RXTYPE() bfin_read16(USB_EP_NI1_RXTYPE) -#define bfin_write_USB_EP_NI1_RXTYPE(val) bfin_write16(USB_EP_NI1_RXTYPE, val) -#define bfin_read_USB_EP_NI1_RXINTERVAL() bfin_read16(USB_EP_NI1_RXINTERVAL) -#define bfin_write_USB_EP_NI1_RXINTERVAL(val) bfin_write16(USB_EP_NI1_RXINTERVAL, val) - -/* USB Endbfin_read_()oint 2 Control Registers */ - -#define bfin_read_USB_EP_NI1_TXCOUNT() bfin_read16(USB_EP_NI1_TXCOUNT) -#define bfin_write_USB_EP_NI1_TXCOUNT(val) bfin_write16(USB_EP_NI1_TXCOUNT, val) -#define bfin_read_USB_EP_NI2_TXMAXP() bfin_read16(USB_EP_NI2_TXMAXP) -#define bfin_write_USB_EP_NI2_TXMAXP(val) bfin_write16(USB_EP_NI2_TXMAXP, val) -#define bfin_read_USB_EP_NI2_TXCSR() bfin_read16(USB_EP_NI2_TXCSR) -#define bfin_write_USB_EP_NI2_TXCSR(val) bfin_write16(USB_EP_NI2_TXCSR, val) -#define bfin_read_USB_EP_NI2_RXMAXP() bfin_read16(USB_EP_NI2_RXMAXP) -#define bfin_write_USB_EP_NI2_RXMAXP(val) bfin_write16(USB_EP_NI2_RXMAXP, val) -#define bfin_read_USB_EP_NI2_RXCSR() bfin_read16(USB_EP_NI2_RXCSR) -#define bfin_write_USB_EP_NI2_RXCSR(val) bfin_write16(USB_EP_NI2_RXCSR, val) -#define bfin_read_USB_EP_NI2_RXCOUNT() bfin_read16(USB_EP_NI2_RXCOUNT) -#define bfin_write_USB_EP_NI2_RXCOUNT(val) bfin_write16(USB_EP_NI2_RXCOUNT, val) -#define bfin_read_USB_EP_NI2_TXTYPE() bfin_read16(USB_EP_NI2_TXTYPE) -#define bfin_write_USB_EP_NI2_TXTYPE(val) bfin_write16(USB_EP_NI2_TXTYPE, val) -#define bfin_read_USB_EP_NI2_TXINTERVAL() bfin_read16(USB_EP_NI2_TXINTERVAL) -#define bfin_write_USB_EP_NI2_TXINTERVAL(val) bfin_write16(USB_EP_NI2_TXINTERVAL, val) -#define bfin_read_USB_EP_NI2_RXTYPE() bfin_read16(USB_EP_NI2_RXTYPE) -#define bfin_write_USB_EP_NI2_RXTYPE(val) bfin_write16(USB_EP_NI2_RXTYPE, val) -#define bfin_read_USB_EP_NI2_RXINTERVAL() bfin_read16(USB_EP_NI2_RXINTERVAL) -#define bfin_write_USB_EP_NI2_RXINTERVAL(val) bfin_write16(USB_EP_NI2_RXINTERVAL, val) - -/* USB Endbfin_read_()oint 3 Control Registers */ - -#define bfin_read_USB_EP_NI2_TXCOUNT() bfin_read16(USB_EP_NI2_TXCOUNT) -#define bfin_write_USB_EP_NI2_TXCOUNT(val) bfin_write16(USB_EP_NI2_TXCOUNT, val) -#define bfin_read_USB_EP_NI3_TXMAXP() bfin_read16(USB_EP_NI3_TXMAXP) -#define bfin_write_USB_EP_NI3_TXMAXP(val) bfin_write16(USB_EP_NI3_TXMAXP, val) -#define bfin_read_USB_EP_NI3_TXCSR() bfin_read16(USB_EP_NI3_TXCSR) -#define bfin_write_USB_EP_NI3_TXCSR(val) bfin_write16(USB_EP_NI3_TXCSR, val) -#define bfin_read_USB_EP_NI3_RXMAXP() bfin_read16(USB_EP_NI3_RXMAXP) -#define bfin_write_USB_EP_NI3_RXMAXP(val) bfin_write16(USB_EP_NI3_RXMAXP, val) -#define bfin_read_USB_EP_NI3_RXCSR() bfin_read16(USB_EP_NI3_RXCSR) -#define bfin_write_USB_EP_NI3_RXCSR(val) bfin_write16(USB_EP_NI3_RXCSR, val) -#define bfin_read_USB_EP_NI3_RXCOUNT() bfin_read16(USB_EP_NI3_RXCOUNT) -#define bfin_write_USB_EP_NI3_RXCOUNT(val) bfin_write16(USB_EP_NI3_RXCOUNT, val) -#define bfin_read_USB_EP_NI3_TXTYPE() bfin_read16(USB_EP_NI3_TXTYPE) -#define bfin_write_USB_EP_NI3_TXTYPE(val) bfin_write16(USB_EP_NI3_TXTYPE, val) -#define bfin_read_USB_EP_NI3_TXINTERVAL() bfin_read16(USB_EP_NI3_TXINTERVAL) -#define bfin_write_USB_EP_NI3_TXINTERVAL(val) bfin_write16(USB_EP_NI3_TXINTERVAL, val) -#define bfin_read_USB_EP_NI3_RXTYPE() bfin_read16(USB_EP_NI3_RXTYPE) -#define bfin_write_USB_EP_NI3_RXTYPE(val) bfin_write16(USB_EP_NI3_RXTYPE, val) -#define bfin_read_USB_EP_NI3_RXINTERVAL() bfin_read16(USB_EP_NI3_RXINTERVAL) -#define bfin_write_USB_EP_NI3_RXINTERVAL(val) bfin_write16(USB_EP_NI3_RXINTERVAL, val) - -/* USB Endbfin_read_()oint 4 Control Registers */ - -#define bfin_read_USB_EP_NI3_TXCOUNT() bfin_read16(USB_EP_NI3_TXCOUNT) -#define bfin_write_USB_EP_NI3_TXCOUNT(val) bfin_write16(USB_EP_NI3_TXCOUNT, val) -#define bfin_read_USB_EP_NI4_TXMAXP() bfin_read16(USB_EP_NI4_TXMAXP) -#define bfin_write_USB_EP_NI4_TXMAXP(val) bfin_write16(USB_EP_NI4_TXMAXP, val) -#define bfin_read_USB_EP_NI4_TXCSR() bfin_read16(USB_EP_NI4_TXCSR) -#define bfin_write_USB_EP_NI4_TXCSR(val) bfin_write16(USB_EP_NI4_TXCSR, val) -#define bfin_read_USB_EP_NI4_RXMAXP() bfin_read16(USB_EP_NI4_RXMAXP) -#define bfin_write_USB_EP_NI4_RXMAXP(val) bfin_write16(USB_EP_NI4_RXMAXP, val) -#define bfin_read_USB_EP_NI4_RXCSR() bfin_read16(USB_EP_NI4_RXCSR) -#define bfin_write_USB_EP_NI4_RXCSR(val) bfin_write16(USB_EP_NI4_RXCSR, val) -#define bfin_read_USB_EP_NI4_RXCOUNT() bfin_read16(USB_EP_NI4_RXCOUNT) -#define bfin_write_USB_EP_NI4_RXCOUNT(val) bfin_write16(USB_EP_NI4_RXCOUNT, val) -#define bfin_read_USB_EP_NI4_TXTYPE() bfin_read16(USB_EP_NI4_TXTYPE) -#define bfin_write_USB_EP_NI4_TXTYPE(val) bfin_write16(USB_EP_NI4_TXTYPE, val) -#define bfin_read_USB_EP_NI4_TXINTERVAL() bfin_read16(USB_EP_NI4_TXINTERVAL) -#define bfin_write_USB_EP_NI4_TXINTERVAL(val) bfin_write16(USB_EP_NI4_TXINTERVAL, val) -#define bfin_read_USB_EP_NI4_RXTYPE() bfin_read16(USB_EP_NI4_RXTYPE) -#define bfin_write_USB_EP_NI4_RXTYPE(val) bfin_write16(USB_EP_NI4_RXTYPE, val) -#define bfin_read_USB_EP_NI4_RXINTERVAL() bfin_read16(USB_EP_NI4_RXINTERVAL) -#define bfin_write_USB_EP_NI4_RXINTERVAL(val) bfin_write16(USB_EP_NI4_RXINTERVAL, val) - -/* USB Endbfin_read_()oint 5 Control Registers */ - -#define bfin_read_USB_EP_NI4_TXCOUNT() bfin_read16(USB_EP_NI4_TXCOUNT) -#define bfin_write_USB_EP_NI4_TXCOUNT(val) bfin_write16(USB_EP_NI4_TXCOUNT, val) -#define bfin_read_USB_EP_NI5_TXMAXP() bfin_read16(USB_EP_NI5_TXMAXP) -#define bfin_write_USB_EP_NI5_TXMAXP(val) bfin_write16(USB_EP_NI5_TXMAXP, val) -#define bfin_read_USB_EP_NI5_TXCSR() bfin_read16(USB_EP_NI5_TXCSR) -#define bfin_write_USB_EP_NI5_TXCSR(val) bfin_write16(USB_EP_NI5_TXCSR, val) -#define bfin_read_USB_EP_NI5_RXMAXP() bfin_read16(USB_EP_NI5_RXMAXP) -#define bfin_write_USB_EP_NI5_RXMAXP(val) bfin_write16(USB_EP_NI5_RXMAXP, val) -#define bfin_read_USB_EP_NI5_RXCSR() bfin_read16(USB_EP_NI5_RXCSR) -#define bfin_write_USB_EP_NI5_RXCSR(val) bfin_write16(USB_EP_NI5_RXCSR, val) -#define bfin_read_USB_EP_NI5_RXCOUNT() bfin_read16(USB_EP_NI5_RXCOUNT) -#define bfin_write_USB_EP_NI5_RXCOUNT(val) bfin_write16(USB_EP_NI5_RXCOUNT, val) -#define bfin_read_USB_EP_NI5_TXTYPE() bfin_read16(USB_EP_NI5_TXTYPE) -#define bfin_write_USB_EP_NI5_TXTYPE(val) bfin_write16(USB_EP_NI5_TXTYPE, val) -#define bfin_read_USB_EP_NI5_TXINTERVAL() bfin_read16(USB_EP_NI5_TXINTERVAL) -#define bfin_write_USB_EP_NI5_TXINTERVAL(val) bfin_write16(USB_EP_NI5_TXINTERVAL, val) -#define bfin_read_USB_EP_NI5_RXTYPE() bfin_read16(USB_EP_NI5_RXTYPE) -#define bfin_write_USB_EP_NI5_RXTYPE(val) bfin_write16(USB_EP_NI5_RXTYPE, val) -#define bfin_read_USB_EP_NI5_RXINTERVAL() bfin_read16(USB_EP_NI5_RXINTERVAL) -#define bfin_write_USB_EP_NI5_RXINTERVAL(val) bfin_write16(USB_EP_NI5_RXINTERVAL, val) - -/* USB Endbfin_read_()oint 6 Control Registers */ - -#define bfin_read_USB_EP_NI5_TXCOUNT() bfin_read16(USB_EP_NI5_TXCOUNT) -#define bfin_write_USB_EP_NI5_TXCOUNT(val) bfin_write16(USB_EP_NI5_TXCOUNT, val) -#define bfin_read_USB_EP_NI6_TXMAXP() bfin_read16(USB_EP_NI6_TXMAXP) -#define bfin_write_USB_EP_NI6_TXMAXP(val) bfin_write16(USB_EP_NI6_TXMAXP, val) -#define bfin_read_USB_EP_NI6_TXCSR() bfin_read16(USB_EP_NI6_TXCSR) -#define bfin_write_USB_EP_NI6_TXCSR(val) bfin_write16(USB_EP_NI6_TXCSR, val) -#define bfin_read_USB_EP_NI6_RXMAXP() bfin_read16(USB_EP_NI6_RXMAXP) -#define bfin_write_USB_EP_NI6_RXMAXP(val) bfin_write16(USB_EP_NI6_RXMAXP, val) -#define bfin_read_USB_EP_NI6_RXCSR() bfin_read16(USB_EP_NI6_RXCSR) -#define bfin_write_USB_EP_NI6_RXCSR(val) bfin_write16(USB_EP_NI6_RXCSR, val) -#define bfin_read_USB_EP_NI6_RXCOUNT() bfin_read16(USB_EP_NI6_RXCOUNT) -#define bfin_write_USB_EP_NI6_RXCOUNT(val) bfin_write16(USB_EP_NI6_RXCOUNT, val) -#define bfin_read_USB_EP_NI6_TXTYPE() bfin_read16(USB_EP_NI6_TXTYPE) -#define bfin_write_USB_EP_NI6_TXTYPE(val) bfin_write16(USB_EP_NI6_TXTYPE, val) -#define bfin_read_USB_EP_NI6_TXINTERVAL() bfin_read16(USB_EP_NI6_TXINTERVAL) -#define bfin_write_USB_EP_NI6_TXINTERVAL(val) bfin_write16(USB_EP_NI6_TXINTERVAL, val) -#define bfin_read_USB_EP_NI6_RXTYPE() bfin_read16(USB_EP_NI6_RXTYPE) -#define bfin_write_USB_EP_NI6_RXTYPE(val) bfin_write16(USB_EP_NI6_RXTYPE, val) -#define bfin_read_USB_EP_NI6_RXINTERVAL() bfin_read16(USB_EP_NI6_RXINTERVAL) -#define bfin_write_USB_EP_NI6_RXINTERVAL(val) bfin_write16(USB_EP_NI6_RXINTERVAL, val) - -/* USB Endbfin_read_()oint 7 Control Registers */ - -#define bfin_read_USB_EP_NI6_TXCOUNT() bfin_read16(USB_EP_NI6_TXCOUNT) -#define bfin_write_USB_EP_NI6_TXCOUNT(val) bfin_write16(USB_EP_NI6_TXCOUNT, val) -#define bfin_read_USB_EP_NI7_TXMAXP() bfin_read16(USB_EP_NI7_TXMAXP) -#define bfin_write_USB_EP_NI7_TXMAXP(val) bfin_write16(USB_EP_NI7_TXMAXP, val) -#define bfin_read_USB_EP_NI7_TXCSR() bfin_read16(USB_EP_NI7_TXCSR) -#define bfin_write_USB_EP_NI7_TXCSR(val) bfin_write16(USB_EP_NI7_TXCSR, val) -#define bfin_read_USB_EP_NI7_RXMAXP() bfin_read16(USB_EP_NI7_RXMAXP) -#define bfin_write_USB_EP_NI7_RXMAXP(val) bfin_write16(USB_EP_NI7_RXMAXP, val) -#define bfin_read_USB_EP_NI7_RXCSR() bfin_read16(USB_EP_NI7_RXCSR) -#define bfin_write_USB_EP_NI7_RXCSR(val) bfin_write16(USB_EP_NI7_RXCSR, val) -#define bfin_read_USB_EP_NI7_RXCOUNT() bfin_read16(USB_EP_NI7_RXCOUNT) -#define bfin_write_USB_EP_NI7_RXCOUNT(val) bfin_write16(USB_EP_NI7_RXCOUNT, val) -#define bfin_read_USB_EP_NI7_TXTYPE() bfin_read16(USB_EP_NI7_TXTYPE) -#define bfin_write_USB_EP_NI7_TXTYPE(val) bfin_write16(USB_EP_NI7_TXTYPE, val) -#define bfin_read_USB_EP_NI7_TXINTERVAL() bfin_read16(USB_EP_NI7_TXINTERVAL) -#define bfin_write_USB_EP_NI7_TXINTERVAL(val) bfin_write16(USB_EP_NI7_TXINTERVAL, val) -#define bfin_read_USB_EP_NI7_RXTYPE() bfin_read16(USB_EP_NI7_RXTYPE) -#define bfin_write_USB_EP_NI7_RXTYPE(val) bfin_write16(USB_EP_NI7_RXTYPE, val) -#define bfin_read_USB_EP_NI7_RXINTERVAL() bfin_read16(USB_EP_NI7_RXINTERVAL) -#define bfin_write_USB_EP_NI7_RXINTERVAL(val) bfin_write16(USB_EP_NI7_RXINTERVAL, val) -#define bfin_read_USB_EP_NI7_TXCOUNT() bfin_read16(USB_EP_NI7_TXCOUNT) -#define bfin_write_USB_EP_NI7_TXCOUNT(val) bfin_write16(USB_EP_NI7_TXCOUNT, val) -#define bfin_read_USB_DMA_INTERRUPT() bfin_read16(USB_DMA_INTERRUPT) -#define bfin_write_USB_DMA_INTERRUPT(val) bfin_write16(USB_DMA_INTERRUPT, val) - -/* USB Channel 0 Config Registers */ - -#define bfin_read_USB_DMA0CONTROL() bfin_read16(USB_DMA0CONTROL) -#define bfin_write_USB_DMA0CONTROL(val) bfin_write16(USB_DMA0CONTROL, val) -#define bfin_read_USB_DMA0ADDRLOW() bfin_read16(USB_DMA0ADDRLOW) -#define bfin_write_USB_DMA0ADDRLOW(val) bfin_write16(USB_DMA0ADDRLOW, val) -#define bfin_read_USB_DMA0ADDRHIGH() bfin_read16(USB_DMA0ADDRHIGH) -#define bfin_write_USB_DMA0ADDRHIGH(val) bfin_write16(USB_DMA0ADDRHIGH, val) -#define bfin_read_USB_DMA0COUNTLOW() bfin_read16(USB_DMA0COUNTLOW) -#define bfin_write_USB_DMA0COUNTLOW(val) bfin_write16(USB_DMA0COUNTLOW, val) -#define bfin_read_USB_DMA0COUNTHIGH() bfin_read16(USB_DMA0COUNTHIGH) -#define bfin_write_USB_DMA0COUNTHIGH(val) bfin_write16(USB_DMA0COUNTHIGH, val) - -/* USB Channel 1 Config Registers */ - -#define bfin_read_USB_DMA1CONTROL() bfin_read16(USB_DMA1CONTROL) -#define bfin_write_USB_DMA1CONTROL(val) bfin_write16(USB_DMA1CONTROL, val) -#define bfin_read_USB_DMA1ADDRLOW() bfin_read16(USB_DMA1ADDRLOW) -#define bfin_write_USB_DMA1ADDRLOW(val) bfin_write16(USB_DMA1ADDRLOW, val) -#define bfin_read_USB_DMA1ADDRHIGH() bfin_read16(USB_DMA1ADDRHIGH) -#define bfin_write_USB_DMA1ADDRHIGH(val) bfin_write16(USB_DMA1ADDRHIGH, val) -#define bfin_read_USB_DMA1COUNTLOW() bfin_read16(USB_DMA1COUNTLOW) -#define bfin_write_USB_DMA1COUNTLOW(val) bfin_write16(USB_DMA1COUNTLOW, val) -#define bfin_read_USB_DMA1COUNTHIGH() bfin_read16(USB_DMA1COUNTHIGH) -#define bfin_write_USB_DMA1COUNTHIGH(val) bfin_write16(USB_DMA1COUNTHIGH, val) - -/* USB Channel 2 Config Registers */ - -#define bfin_read_USB_DMA2CONTROL() bfin_read16(USB_DMA2CONTROL) -#define bfin_write_USB_DMA2CONTROL(val) bfin_write16(USB_DMA2CONTROL, val) -#define bfin_read_USB_DMA2ADDRLOW() bfin_read16(USB_DMA2ADDRLOW) -#define bfin_write_USB_DMA2ADDRLOW(val) bfin_write16(USB_DMA2ADDRLOW, val) -#define bfin_read_USB_DMA2ADDRHIGH() bfin_read16(USB_DMA2ADDRHIGH) -#define bfin_write_USB_DMA2ADDRHIGH(val) bfin_write16(USB_DMA2ADDRHIGH, val) -#define bfin_read_USB_DMA2COUNTLOW() bfin_read16(USB_DMA2COUNTLOW) -#define bfin_write_USB_DMA2COUNTLOW(val) bfin_write16(USB_DMA2COUNTLOW, val) -#define bfin_read_USB_DMA2COUNTHIGH() bfin_read16(USB_DMA2COUNTHIGH) -#define bfin_write_USB_DMA2COUNTHIGH(val) bfin_write16(USB_DMA2COUNTHIGH, val) - -/* USB Channel 3 Config Registers */ - -#define bfin_read_USB_DMA3CONTROL() bfin_read16(USB_DMA3CONTROL) -#define bfin_write_USB_DMA3CONTROL(val) bfin_write16(USB_DMA3CONTROL, val) -#define bfin_read_USB_DMA3ADDRLOW() bfin_read16(USB_DMA3ADDRLOW) -#define bfin_write_USB_DMA3ADDRLOW(val) bfin_write16(USB_DMA3ADDRLOW, val) -#define bfin_read_USB_DMA3ADDRHIGH() bfin_read16(USB_DMA3ADDRHIGH) -#define bfin_write_USB_DMA3ADDRHIGH(val) bfin_write16(USB_DMA3ADDRHIGH, val) -#define bfin_read_USB_DMA3COUNTLOW() bfin_read16(USB_DMA3COUNTLOW) -#define bfin_write_USB_DMA3COUNTLOW(val) bfin_write16(USB_DMA3COUNTLOW, val) -#define bfin_read_USB_DMA3COUNTHIGH() bfin_read16(USB_DMA3COUNTHIGH) -#define bfin_write_USB_DMA3COUNTHIGH(val) bfin_write16(USB_DMA3COUNTHIGH, val) - -/* USB Channel 4 Config Registers */ - -#define bfin_read_USB_DMA4CONTROL() bfin_read16(USB_DMA4CONTROL) -#define bfin_write_USB_DMA4CONTROL(val) bfin_write16(USB_DMA4CONTROL, val) -#define bfin_read_USB_DMA4ADDRLOW() bfin_read16(USB_DMA4ADDRLOW) -#define bfin_write_USB_DMA4ADDRLOW(val) bfin_write16(USB_DMA4ADDRLOW, val) -#define bfin_read_USB_DMA4ADDRHIGH() bfin_read16(USB_DMA4ADDRHIGH) -#define bfin_write_USB_DMA4ADDRHIGH(val) bfin_write16(USB_DMA4ADDRHIGH, val) -#define bfin_read_USB_DMA4COUNTLOW() bfin_read16(USB_DMA4COUNTLOW) -#define bfin_write_USB_DMA4COUNTLOW(val) bfin_write16(USB_DMA4COUNTLOW, val) -#define bfin_read_USB_DMA4COUNTHIGH() bfin_read16(USB_DMA4COUNTHIGH) -#define bfin_write_USB_DMA4COUNTHIGH(val) bfin_write16(USB_DMA4COUNTHIGH, val) - -/* USB Channel 5 Config Registers */ - -#define bfin_read_USB_DMA5CONTROL() bfin_read16(USB_DMA5CONTROL) -#define bfin_write_USB_DMA5CONTROL(val) bfin_write16(USB_DMA5CONTROL, val) -#define bfin_read_USB_DMA5ADDRLOW() bfin_read16(USB_DMA5ADDRLOW) -#define bfin_write_USB_DMA5ADDRLOW(val) bfin_write16(USB_DMA5ADDRLOW, val) -#define bfin_read_USB_DMA5ADDRHIGH() bfin_read16(USB_DMA5ADDRHIGH) -#define bfin_write_USB_DMA5ADDRHIGH(val) bfin_write16(USB_DMA5ADDRHIGH, val) -#define bfin_read_USB_DMA5COUNTLOW() bfin_read16(USB_DMA5COUNTLOW) -#define bfin_write_USB_DMA5COUNTLOW(val) bfin_write16(USB_DMA5COUNTLOW, val) -#define bfin_read_USB_DMA5COUNTHIGH() bfin_read16(USB_DMA5COUNTHIGH) -#define bfin_write_USB_DMA5COUNTHIGH(val) bfin_write16(USB_DMA5COUNTHIGH, val) - -/* USB Channel 6 Config Registers */ - -#define bfin_read_USB_DMA6CONTROL() bfin_read16(USB_DMA6CONTROL) -#define bfin_write_USB_DMA6CONTROL(val) bfin_write16(USB_DMA6CONTROL, val) -#define bfin_read_USB_DMA6ADDRLOW() bfin_read16(USB_DMA6ADDRLOW) -#define bfin_write_USB_DMA6ADDRLOW(val) bfin_write16(USB_DMA6ADDRLOW, val) -#define bfin_read_USB_DMA6ADDRHIGH() bfin_read16(USB_DMA6ADDRHIGH) -#define bfin_write_USB_DMA6ADDRHIGH(val) bfin_write16(USB_DMA6ADDRHIGH, val) -#define bfin_read_USB_DMA6COUNTLOW() bfin_read16(USB_DMA6COUNTLOW) -#define bfin_write_USB_DMA6COUNTLOW(val) bfin_write16(USB_DMA6COUNTLOW, val) -#define bfin_read_USB_DMA6COUNTHIGH() bfin_read16(USB_DMA6COUNTHIGH) -#define bfin_write_USB_DMA6COUNTHIGH(val) bfin_write16(USB_DMA6COUNTHIGH, val) - -/* USB Channel 7 Config Registers */ - -#define bfin_read_USB_DMA7CONTROL() bfin_read16(USB_DMA7CONTROL) -#define bfin_write_USB_DMA7CONTROL(val) bfin_write16(USB_DMA7CONTROL, val) -#define bfin_read_USB_DMA7ADDRLOW() bfin_read16(USB_DMA7ADDRLOW) -#define bfin_write_USB_DMA7ADDRLOW(val) bfin_write16(USB_DMA7ADDRLOW, val) -#define bfin_read_USB_DMA7ADDRHIGH() bfin_read16(USB_DMA7ADDRHIGH) -#define bfin_write_USB_DMA7ADDRHIGH(val) bfin_write16(USB_DMA7ADDRHIGH, val) -#define bfin_read_USB_DMA7COUNTLOW() bfin_read16(USB_DMA7COUNTLOW) -#define bfin_write_USB_DMA7COUNTLOW(val) bfin_write16(USB_DMA7COUNTLOW, val) -#define bfin_read_USB_DMA7COUNTHIGH() bfin_read16(USB_DMA7COUNTHIGH) -#define bfin_write_USB_DMA7COUNTHIGH(val) bfin_write16(USB_DMA7COUNTHIGH, val) - -/* Keybfin_read_()ad Registers */ - -#define bfin_read_KPAD_CTL() bfin_read16(KPAD_CTL) -#define bfin_write_KPAD_CTL(val) bfin_write16(KPAD_CTL, val) -#define bfin_read_KPAD_PRESCALE() bfin_read16(KPAD_PRESCALE) -#define bfin_write_KPAD_PRESCALE(val) bfin_write16(KPAD_PRESCALE, val) -#define bfin_read_KPAD_MSEL() bfin_read16(KPAD_MSEL) -#define bfin_write_KPAD_MSEL(val) bfin_write16(KPAD_MSEL, val) -#define bfin_read_KPAD_ROWCOL() bfin_read16(KPAD_ROWCOL) -#define bfin_write_KPAD_ROWCOL(val) bfin_write16(KPAD_ROWCOL, val) -#define bfin_read_KPAD_STAT() bfin_read16(KPAD_STAT) -#define bfin_write_KPAD_STAT(val) bfin_write16(KPAD_STAT, val) -#define bfin_read_KPAD_SOFTEVAL() bfin_read16(KPAD_SOFTEVAL) -#define bfin_write_KPAD_SOFTEVAL(val) bfin_write16(KPAD_SOFTEVAL, val) - -/* Pixel Combfin_read_()ositor (PIXC) Registers */ - -#define bfin_read_PIXC_CTL() bfin_read16(PIXC_CTL) -#define bfin_write_PIXC_CTL(val) bfin_write16(PIXC_CTL, val) -#define bfin_read_PIXC_PPL() bfin_read16(PIXC_PPL) -#define bfin_write_PIXC_PPL(val) bfin_write16(PIXC_PPL, val) -#define bfin_read_PIXC_LPF() bfin_read16(PIXC_LPF) -#define bfin_write_PIXC_LPF(val) bfin_write16(PIXC_LPF, val) -#define bfin_read_PIXC_AHSTART() bfin_read16(PIXC_AHSTART) -#define bfin_write_PIXC_AHSTART(val) bfin_write16(PIXC_AHSTART, val) -#define bfin_read_PIXC_AHEND() bfin_read16(PIXC_AHEND) -#define bfin_write_PIXC_AHEND(val) bfin_write16(PIXC_AHEND, val) -#define bfin_read_PIXC_AVSTART() bfin_read16(PIXC_AVSTART) -#define bfin_write_PIXC_AVSTART(val) bfin_write16(PIXC_AVSTART, val) -#define bfin_read_PIXC_AVEND() bfin_read16(PIXC_AVEND) -#define bfin_write_PIXC_AVEND(val) bfin_write16(PIXC_AVEND, val) -#define bfin_read_PIXC_ATRANSP() bfin_read16(PIXC_ATRANSP) -#define bfin_write_PIXC_ATRANSP(val) bfin_write16(PIXC_ATRANSP, val) -#define bfin_read_PIXC_BHSTART() bfin_read16(PIXC_BHSTART) -#define bfin_write_PIXC_BHSTART(val) bfin_write16(PIXC_BHSTART, val) -#define bfin_read_PIXC_BHEND() bfin_read16(PIXC_BHEND) -#define bfin_write_PIXC_BHEND(val) bfin_write16(PIXC_BHEND, val) -#define bfin_read_PIXC_BVSTART() bfin_read16(PIXC_BVSTART) -#define bfin_write_PIXC_BVSTART(val) bfin_write16(PIXC_BVSTART, val) -#define bfin_read_PIXC_BVEND() bfin_read16(PIXC_BVEND) -#define bfin_write_PIXC_BVEND(val) bfin_write16(PIXC_BVEND, val) -#define bfin_read_PIXC_BTRANSP() bfin_read16(PIXC_BTRANSP) -#define bfin_write_PIXC_BTRANSP(val) bfin_write16(PIXC_BTRANSP, val) -#define bfin_read_PIXC_INTRSTAT() bfin_read16(PIXC_INTRSTAT) -#define bfin_write_PIXC_INTRSTAT(val) bfin_write16(PIXC_INTRSTAT, val) -#define bfin_read_PIXC_RYCON() bfin_read32(PIXC_RYCON) -#define bfin_write_PIXC_RYCON(val) bfin_write32(PIXC_RYCON, val) -#define bfin_read_PIXC_GUCON() bfin_read32(PIXC_GUCON) -#define bfin_write_PIXC_GUCON(val) bfin_write32(PIXC_GUCON, val) -#define bfin_read_PIXC_BVCON() bfin_read32(PIXC_BVCON) -#define bfin_write_PIXC_BVCON(val) bfin_write32(PIXC_BVCON, val) -#define bfin_read_PIXC_CCBIAS() bfin_read32(PIXC_CCBIAS) -#define bfin_write_PIXC_CCBIAS(val) bfin_write32(PIXC_CCBIAS, val) -#define bfin_read_PIXC_TC() bfin_read32(PIXC_TC) -#define bfin_write_PIXC_TC(val) bfin_write32(PIXC_TC, val) - -/* Handshake MDMA 0 Registers */ - -#define bfin_read_HMDMA0_CONTROL() bfin_read16(HMDMA0_CONTROL) -#define bfin_write_HMDMA0_CONTROL(val) bfin_write16(HMDMA0_CONTROL, val) -#define bfin_read_HMDMA0_ECINIT() bfin_read16(HMDMA0_ECINIT) -#define bfin_write_HMDMA0_ECINIT(val) bfin_write16(HMDMA0_ECINIT, val) -#define bfin_read_HMDMA0_BCINIT() bfin_read16(HMDMA0_BCINIT) -#define bfin_write_HMDMA0_BCINIT(val) bfin_write16(HMDMA0_BCINIT, val) -#define bfin_read_HMDMA0_ECURGENT() bfin_read16(HMDMA0_ECURGENT) -#define bfin_write_HMDMA0_ECURGENT(val) bfin_write16(HMDMA0_ECURGENT, val) -#define bfin_read_HMDMA0_ECOVERFLOW() bfin_read16(HMDMA0_ECOVERFLOW) -#define bfin_write_HMDMA0_ECOVERFLOW(val) bfin_write16(HMDMA0_ECOVERFLOW, val) -#define bfin_read_HMDMA0_ECOUNT() bfin_read16(HMDMA0_ECOUNT) -#define bfin_write_HMDMA0_ECOUNT(val) bfin_write16(HMDMA0_ECOUNT, val) -#define bfin_read_HMDMA0_BCOUNT() bfin_read16(HMDMA0_BCOUNT) -#define bfin_write_HMDMA0_BCOUNT(val) bfin_write16(HMDMA0_BCOUNT, val) - -/* Handshake MDMA 1 Registers */ - -#define bfin_read_HMDMA1_CONTROL() bfin_read16(HMDMA1_CONTROL) -#define bfin_write_HMDMA1_CONTROL(val) bfin_write16(HMDMA1_CONTROL, val) -#define bfin_read_HMDMA1_ECINIT() bfin_read16(HMDMA1_ECINIT) -#define bfin_write_HMDMA1_ECINIT(val) bfin_write16(HMDMA1_ECINIT, val) -#define bfin_read_HMDMA1_BCINIT() bfin_read16(HMDMA1_BCINIT) -#define bfin_write_HMDMA1_BCINIT(val) bfin_write16(HMDMA1_BCINIT, val) -#define bfin_read_HMDMA1_ECURGENT() bfin_read16(HMDMA1_ECURGENT) -#define bfin_write_HMDMA1_ECURGENT(val) bfin_write16(HMDMA1_ECURGENT, val) -#define bfin_read_HMDMA1_ECOVERFLOW() bfin_read16(HMDMA1_ECOVERFLOW) -#define bfin_write_HMDMA1_ECOVERFLOW(val) bfin_write16(HMDMA1_ECOVERFLOW, val) -#define bfin_read_HMDMA1_ECOUNT() bfin_read16(HMDMA1_ECOUNT) -#define bfin_write_HMDMA1_ECOUNT(val) bfin_write16(HMDMA1_ECOUNT, val) -#define bfin_read_HMDMA1_BCOUNT() bfin_read16(HMDMA1_BCOUNT) -#define bfin_write_HMDMA1_BCOUNT(val) bfin_write16(HMDMA1_BCOUNT, val) - #endif /* _CDEF_BF549_H */ diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h index a2e9d98..32f71e6 100644 --- a/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h +++ b/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h @@ -2615,17 +2615,6 @@ #define bfin_read_CNT_MIN() bfin_read32(CNT_MIN) #define bfin_write_CNT_MIN(val) bfin_write32(CNT_MIN, val) -/* OTP/FUSE Registers */ - -#define bfin_read_OTP_CONTROL() bfin_read16(OTP_CONTROL) -#define bfin_write_OTP_CONTROL(val) bfin_write16(OTP_CONTROL, val) -#define bfin_read_OTP_BEN() bfin_read16(OTP_BEN) -#define bfin_write_OTP_BEN(val) bfin_write16(OTP_BEN, val) -#define bfin_read_OTP_STATUS() bfin_read16(OTP_STATUS) -#define bfin_write_OTP_STATUS(val) bfin_write16(OTP_STATUS, val) -#define bfin_read_OTP_TIMING() bfin_read32(OTP_TIMING) -#define bfin_write_OTP_TIMING(val) bfin_write32(OTP_TIMING, val) - /* Security Registers */ #define bfin_read_SECURE_SYSSWT() bfin_read32(SECURE_SYSSWT) @@ -2640,17 +2629,6 @@ #define bfin_read_DMAC1_PERIMUX() bfin_read16(DMAC1_PERIMUX) #define bfin_write_DMAC1_PERIMUX(val) bfin_write16(DMAC1_PERIMUX, val) -/* OTP Read/Write Data Buffer Registers */ - -#define bfin_read_OTP_DATA0() bfin_read32(OTP_DATA0) -#define bfin_write_OTP_DATA0(val) bfin_write32(OTP_DATA0, val) -#define bfin_read_OTP_DATA1() bfin_read32(OTP_DATA1) -#define bfin_write_OTP_DATA1(val) bfin_write32(OTP_DATA1, val) -#define bfin_read_OTP_DATA2() bfin_read32(OTP_DATA2) -#define bfin_write_OTP_DATA2(val) bfin_write32(OTP_DATA2, val) -#define bfin_read_OTP_DATA3() bfin_read32(OTP_DATA3) -#define bfin_write_OTP_DATA3(val) bfin_write32(OTP_DATA3, val) - /* Handshake MDMA is not defined in the shared file because it is not available on the ADSP-BF542 bfin_read_()rocessor */ /* legacy definitions */ diff --git a/arch/blackfin/mach-bf548/include/mach/defBF544.h b/arch/blackfin/mach-bf548/include/mach/defBF544.h index 39f588d..f916c52 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF544.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF544.h @@ -624,9 +624,9 @@ #define DMA_READY 0x1 /* DMA Ready */ #define FIFOFULL 0x2 /* FIFO Full */ #define FIFOEMPTY 0x4 /* FIFO Empty */ -#define COMPLETE 0x8 /* DMA Complete */ +#define DMA_COMPLETE 0x8 /* DMA Complete */ #define HSHK 0x10 /* Host Handshake */ -#define TIMEOUT 0x20 /* Host Timeout */ +#define HSTIMEOUT 0x20 /* Host Timeout */ #define HIRQ 0x40 /* Host Interrupt Request */ #define ALLOW_CNFG 0x80 /* Allow New Configuration */ #define DMA_DIR 0x100 /* DMA Direction */ diff --git a/arch/blackfin/mach-bf548/include/mach/defBF547.h b/arch/blackfin/mach-bf548/include/mach/defBF547.h index c4dcf30..72c3436 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF547.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF547.h @@ -4,18 +4,18 @@ * Licensed under the ADI BSD license or the GPL-2 (or later) */ -#ifndef _DEF_BF548_H -#define _DEF_BF548_H +#ifndef _DEF_BF547_H +#define _DEF_BF547_H /* Include all Core registers and bit definitions */ #include <asm/def_LPBlackfin.h> -/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */ +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF547 */ /* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */ #include "defBF54x_base.h" -/* The following are the #defines needed by ADSP-BF548 that are not in the common header */ +/* The following are the #defines needed by ADSP-BF547 that are not in the common header */ /* Timer Registers */ @@ -1217,4 +1217,4 @@ /* ******************************************* */ -#endif /* _DEF_BF548_H */ +#endif /* _DEF_BF547_H */ diff --git a/arch/blackfin/mach-bf548/include/mach/defBF548.h b/arch/blackfin/mach-bf548/include/mach/defBF548.h index a507998..3fb33b0 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF548.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF548.h @@ -15,115 +15,8 @@ /* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */ #include "defBF54x_base.h" -/* The following are the #defines needed by ADSP-BF548 that are not in the common header */ - -/* Timer Registers */ - -#define TIMER8_CONFIG 0xffc00600 /* Timer 8 Configuration Register */ -#define TIMER8_COUNTER 0xffc00604 /* Timer 8 Counter Register */ -#define TIMER8_PERIOD 0xffc00608 /* Timer 8 Period Register */ -#define TIMER8_WIDTH 0xffc0060c /* Timer 8 Width Register */ -#define TIMER9_CONFIG 0xffc00610 /* Timer 9 Configuration Register */ -#define TIMER9_COUNTER 0xffc00614 /* Timer 9 Counter Register */ -#define TIMER9_PERIOD 0xffc00618 /* Timer 9 Period Register */ -#define TIMER9_WIDTH 0xffc0061c /* Timer 9 Width Register */ -#define TIMER10_CONFIG 0xffc00620 /* Timer 10 Configuration Register */ -#define TIMER10_COUNTER 0xffc00624 /* Timer 10 Counter Register */ -#define TIMER10_PERIOD 0xffc00628 /* Timer 10 Period Register */ -#define TIMER10_WIDTH 0xffc0062c /* Timer 10 Width Register */ - -/* Timer Group of 3 Registers */ - -#define TIMER_ENABLE1 0xffc00640 /* Timer Group of 3 Enable Register */ -#define TIMER_DISABLE1 0xffc00644 /* Timer Group of 3 Disable Register */ -#define TIMER_STATUS1 0xffc00648 /* Timer Group of 3 Status Register */ - -/* SPORT0 Registers */ - -#define SPORT0_TCR1 0xffc00800 /* SPORT0 Transmit Configuration 1 Register */ -#define SPORT0_TCR2 0xffc00804 /* SPORT0 Transmit Configuration 2 Register */ -#define SPORT0_TCLKDIV 0xffc00808 /* SPORT0 Transmit Serial Clock Divider Register */ -#define SPORT0_TFSDIV 0xffc0080c /* SPORT0 Transmit Frame Sync Divider Register */ -#define SPORT0_TX 0xffc00810 /* SPORT0 Transmit Data Register */ -#define SPORT0_RX 0xffc00818 /* SPORT0 Receive Data Register */ -#define SPORT0_RCR1 0xffc00820 /* SPORT0 Receive Configuration 1 Register */ -#define SPORT0_RCR2 0xffc00824 /* SPORT0 Receive Configuration 2 Register */ -#define SPORT0_RCLKDIV 0xffc00828 /* SPORT0 Receive Serial Clock Divider Register */ -#define SPORT0_RFSDIV 0xffc0082c /* SPORT0 Receive Frame Sync Divider Register */ -#define SPORT0_STAT 0xffc00830 /* SPORT0 Status Register */ -#define SPORT0_CHNL 0xffc00834 /* SPORT0 Current Channel Register */ -#define SPORT0_MCMC1 0xffc00838 /* SPORT0 Multi channel Configuration Register 1 */ -#define SPORT0_MCMC2 0xffc0083c /* SPORT0 Multi channel Configuration Register 2 */ -#define SPORT0_MTCS0 0xffc00840 /* SPORT0 Multi channel Transmit Select Register 0 */ -#define SPORT0_MTCS1 0xffc00844 /* SPORT0 Multi channel Transmit Select Register 1 */ -#define SPORT0_MTCS2 0xffc00848 /* SPORT0 Multi channel Transmit Select Register 2 */ -#define SPORT0_MTCS3 0xffc0084c /* SPORT0 Multi channel Transmit Select Register 3 */ -#define SPORT0_MRCS0 0xffc00850 /* SPORT0 Multi channel Receive Select Register 0 */ -#define SPORT0_MRCS1 0xffc00854 /* SPORT0 Multi channel Receive Select Register 1 */ -#define SPORT0_MRCS2 0xffc00858 /* SPORT0 Multi channel Receive Select Register 2 */ -#define SPORT0_MRCS3 0xffc0085c /* SPORT0 Multi channel Receive Select Register 3 */ - -/* EPPI0 Registers */ - -#define EPPI0_STATUS 0xffc01000 /* EPPI0 Status Register */ -#define EPPI0_HCOUNT 0xffc01004 /* EPPI0 Horizontal Transfer Count Register */ -#define EPPI0_HDELAY 0xffc01008 /* EPPI0 Horizontal Delay Count Register */ -#define EPPI0_VCOUNT 0xffc0100c /* EPPI0 Vertical Transfer Count Register */ -#define EPPI0_VDELAY 0xffc01010 /* EPPI0 Vertical Delay Count Register */ -#define EPPI0_FRAME 0xffc01014 /* EPPI0 Lines per Frame Register */ -#define EPPI0_LINE 0xffc01018 /* EPPI0 Samples per Line Register */ -#define EPPI0_CLKDIV 0xffc0101c /* EPPI0 Clock Divide Register */ -#define EPPI0_CONTROL 0xffc01020 /* EPPI0 Control Register */ -#define EPPI0_FS1W_HBL 0xffc01024 /* EPPI0 FS1 Width Register / EPPI0 Horizontal Blanking Samples Per Line Register */ -#define EPPI0_FS1P_AVPL 0xffc01028 /* EPPI0 FS1 Period Register / EPPI0 Active Video Samples Per Line Register */ -#define EPPI0_FS2W_LVB 0xffc0102c /* EPPI0 FS2 Width Register / EPPI0 Lines of Vertical Blanking Register */ -#define EPPI0_FS2P_LAVF 0xffc01030 /* EPPI0 FS2 Period Register/ EPPI0 Lines of Active Video Per Field Register */ -#define EPPI0_CLIP 0xffc01034 /* EPPI0 Clipping Register */ - -/* UART2 Registers */ - -#define UART2_DLL 0xffc02100 /* Divisor Latch Low Byte */ -#define UART2_DLH 0xffc02104 /* Divisor Latch High Byte */ -#define UART2_GCTL 0xffc02108 /* Global Control Register */ -#define UART2_LCR 0xffc0210c /* Line Control Register */ -#define UART2_MCR 0xffc02110 /* Modem Control Register */ -#define UART2_LSR 0xffc02114 /* Line Status Register */ -#define UART2_MSR 0xffc02118 /* Modem Status Register */ -#define UART2_SCR 0xffc0211c /* Scratch Register */ -#define UART2_IER_SET 0xffc02120 /* Interrupt Enable Register Set */ -#define UART2_IER_CLEAR 0xffc02124 /* Interrupt Enable Register Clear */ -#define UART2_RBR 0xffc0212c /* Receive Buffer Register */ - -/* Two Wire Interface Registers (TWI1) */ - -#define TWI1_REGBASE 0xffc02200 -#define TWI1_CLKDIV 0xffc02200 /* Clock Divider Register */ -#define TWI1_CONTROL 0xffc02204 /* TWI Control Register */ -#define TWI1_SLAVE_CTRL 0xffc02208 /* TWI Slave Mode Control Register */ -#define TWI1_SLAVE_STAT 0xffc0220c /* TWI Slave Mode Status Register */ -#define TWI1_SLAVE_ADDR 0xffc02210 /* TWI Slave Mode Address Register */ -#define TWI1_MASTER_CTRL 0xffc02214 /* TWI Master Mode Control Register */ -#define TWI1_MASTER_STAT 0xffc02218 /* TWI Master Mode Status Register */ -#define TWI1_MASTER_ADDR 0xffc0221c /* TWI Master Mode Address Register */ -#define TWI1_INT_STAT 0xffc02220 /* TWI Interrupt Status Register */ -#define TWI1_INT_MASK 0xffc02224 /* TWI Interrupt Mask Register */ -#define TWI1_FIFO_CTRL 0xffc02228 /* TWI FIFO Control Register */ -#define TWI1_FIFO_STAT 0xffc0222c /* TWI FIFO Status Register */ -#define TWI1_XMT_DATA8 0xffc02280 /* TWI FIFO Transmit Data Single Byte Register */ -#define TWI1_XMT_DATA16 0xffc02284 /* TWI FIFO Transmit Data Double Byte Register */ -#define TWI1_RCV_DATA8 0xffc02288 /* TWI FIFO Receive Data Single Byte Register */ -#define TWI1_RCV_DATA16 0xffc0228c /* TWI FIFO Receive Data Double Byte Register */ - -/* SPI2 Registers */ - -#define SPI2_REGBASE 0xffc02400 -#define SPI2_CTL 0xffc02400 /* SPI2 Control Register */ -#define SPI2_FLG 0xffc02404 /* SPI2 Flag Register */ -#define SPI2_STAT 0xffc02408 /* SPI2 Status Register */ -#define SPI2_TDBR 0xffc0240c /* SPI2 Transmit Data Buffer Register */ -#define SPI2_RDBR 0xffc02410 /* SPI2 Receive Data Buffer Register */ -#define SPI2_BAUD 0xffc02414 /* SPI2 Baud Rate Register */ -#define SPI2_SHADOW 0xffc02418 /* SPI2 Receive Data Buffer Shadow Register */ +/* The BF548 is like the BF547, but has additional CANs */ +#include "defBF547.h" /* CAN Controller 1 Config 1 Registers */ @@ -508,1096 +401,4 @@ #define CAN1_MB31_ID0 0xffc037f8 /* CAN Controller 1 Mailbox 31 ID0 Register */ #define CAN1_MB31_ID1 0xffc037fc /* CAN Controller 1 Mailbox 31 ID1 Register */ -/* ATAPI Registers */ - -#define ATAPI_CONTROL 0xffc03800 /* ATAPI Control Register */ -#define ATAPI_STATUS 0xffc03804 /* ATAPI Status Register */ -#define ATAPI_DEV_ADDR 0xffc03808 /* ATAPI Device Register Address */ -#define ATAPI_DEV_TXBUF 0xffc0380c /* ATAPI Device Register Write Data */ -#define ATAPI_DEV_RXBUF 0xffc03810 /* ATAPI Device Register Read Data */ -#define ATAPI_INT_MASK 0xffc03814 /* ATAPI Interrupt Mask Register */ -#define ATAPI_INT_STATUS 0xffc03818 /* ATAPI Interrupt Status Register */ -#define ATAPI_XFER_LEN 0xffc0381c /* ATAPI Length of Transfer */ -#define ATAPI_LINE_STATUS 0xffc03820 /* ATAPI Line Status */ -#define ATAPI_SM_STATE 0xffc03824 /* ATAPI State Machine Status */ -#define ATAPI_TERMINATE 0xffc03828 /* ATAPI Host Terminate */ -#define ATAPI_PIO_TFRCNT 0xffc0382c /* ATAPI PIO mode transfer count */ -#define ATAPI_DMA_TFRCNT 0xffc03830 /* ATAPI DMA mode transfer count */ -#define ATAPI_UMAIN_TFRCNT 0xffc03834 /* ATAPI UDMAIN transfer count */ -#define ATAPI_UDMAOUT_TFRCNT 0xffc03838 /* ATAPI UDMAOUT transfer count */ -#define ATAPI_REG_TIM_0 0xffc03840 /* ATAPI Register Transfer Timing 0 */ -#define ATAPI_PIO_TIM_0 0xffc03844 /* ATAPI PIO Timing 0 Register */ -#define ATAPI_PIO_TIM_1 0xffc03848 /* ATAPI PIO Timing 1 Register */ -#define ATAPI_MULTI_TIM_0 0xffc03850 /* ATAPI Multi-DMA Timing 0 Register */ -#define ATAPI_MULTI_TIM_1 0xffc03854 /* ATAPI Multi-DMA Timing 1 Register */ -#define ATAPI_MULTI_TIM_2 0xffc03858 /* ATAPI Multi-DMA Timing 2 Register */ -#define ATAPI_ULTRA_TIM_0 0xffc03860 /* ATAPI Ultra-DMA Timing 0 Register */ -#define ATAPI_ULTRA_TIM_1 0xffc03864 /* ATAPI Ultra-DMA Timing 1 Register */ -#define ATAPI_ULTRA_TIM_2 0xffc03868 /* ATAPI Ultra-DMA Timing 2 Register */ -#define ATAPI_ULTRA_TIM_3 0xffc0386c /* ATAPI Ultra-DMA Timing 3 Register */ - -/* SDH Registers */ - -#define SDH_PWR_CTL 0xffc03900 /* SDH Power Control */ -#define SDH_CLK_CTL 0xffc03904 /* SDH Clock Control */ -#define SDH_ARGUMENT 0xffc03908 /* SDH Argument */ -#define SDH_COMMAND 0xffc0390c /* SDH Command */ -#define SDH_RESP_CMD 0xffc03910 /* SDH Response Command */ -#define SDH_RESPONSE0 0xffc03914 /* SDH Response0 */ -#define SDH_RESPONSE1 0xffc03918 /* SDH Response1 */ -#define SDH_RESPONSE2 0xffc0391c /* SDH Response2 */ -#define SDH_RESPONSE3 0xffc03920 /* SDH Response3 */ -#define SDH_DATA_TIMER 0xffc03924 /* SDH Data Timer */ -#define SDH_DATA_LGTH 0xffc03928 /* SDH Data Length */ -#define SDH_DATA_CTL 0xffc0392c /* SDH Data Control */ -#define SDH_DATA_CNT 0xffc03930 /* SDH Data Counter */ -#define SDH_STATUS 0xffc03934 /* SDH Status */ -#define SDH_STATUS_CLR 0xffc03938 /* SDH Status Clear */ -#define SDH_MASK0 0xffc0393c /* SDH Interrupt0 Mask */ -#define SDH_MASK1 0xffc03940 /* SDH Interrupt1 Mask */ -#define SDH_FIFO_CNT 0xffc03948 /* SDH FIFO Counter */ -#define SDH_FIFO 0xffc03980 /* SDH Data FIFO */ -#define SDH_E_STATUS 0xffc039c0 /* SDH Exception Status */ -#define SDH_E_MASK 0xffc039c4 /* SDH Exception Mask */ -#define SDH_CFG 0xffc039c8 /* SDH Configuration */ -#define SDH_RD_WAIT_EN 0xffc039cc /* SDH Read Wait Enable */ -#define SDH_PID0 0xffc039d0 /* SDH Peripheral Identification0 */ -#define SDH_PID1 0xffc039d4 /* SDH Peripheral Identification1 */ -#define SDH_PID2 0xffc039d8 /* SDH Peripheral Identification2 */ -#define SDH_PID3 0xffc039dc /* SDH Peripheral Identification3 */ -#define SDH_PID4 0xffc039e0 /* SDH Peripheral Identification4 */ -#define SDH_PID5 0xffc039e4 /* SDH Peripheral Identification5 */ -#define SDH_PID6 0xffc039e8 /* SDH Peripheral Identification6 */ -#define SDH_PID7 0xffc039ec /* SDH Peripheral Identification7 */ - -/* HOST Port Registers */ - -#define HOST_CONTROL 0xffc03a00 /* HOST Control Register */ -#define HOST_STATUS 0xffc03a04 /* HOST Status Register */ -#define HOST_TIMEOUT 0xffc03a08 /* HOST Acknowledge Mode Timeout Register */ - -/* USB Control Registers */ - -#define USB_FADDR 0xffc03c00 /* Function address register */ -#define USB_POWER 0xffc03c04 /* Power management register */ -#define USB_INTRTX 0xffc03c08 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */ -#define USB_INTRRX 0xffc03c0c /* Interrupt register for Rx endpoints 1 to 7 */ -#define USB_INTRTXE 0xffc03c10 /* Interrupt enable register for IntrTx */ -#define USB_INTRRXE 0xffc03c14 /* Interrupt enable register for IntrRx */ -#define USB_INTRUSB 0xffc03c18 /* Interrupt register for common USB interrupts */ -#define USB_INTRUSBE 0xffc03c1c /* Interrupt enable register for IntrUSB */ -#define USB_FRAME 0xffc03c20 /* USB frame number */ -#define USB_INDEX 0xffc03c24 /* Index register for selecting the indexed endpoint registers */ -#define USB_TESTMODE 0xffc03c28 /* Enabled USB 20 test modes */ -#define USB_GLOBINTR 0xffc03c2c /* Global Interrupt Mask register and Wakeup Exception Interrupt */ -#define USB_GLOBAL_CTL 0xffc03c30 /* Global Clock Control for the core */ - -/* USB Packet Control Registers */ - -#define USB_TX_MAX_PACKET 0xffc03c40 /* Maximum packet size for Host Tx endpoint */ -#define USB_CSR0 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ -#define USB_TXCSR 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ -#define USB_RX_MAX_PACKET 0xffc03c48 /* Maximum packet size for Host Rx endpoint */ -#define USB_RXCSR 0xffc03c4c /* Control Status register for Host Rx endpoint */ -#define USB_COUNT0 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ -#define USB_RXCOUNT 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ -#define USB_TXTYPE 0xffc03c54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */ -#define USB_NAKLIMIT0 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ -#define USB_TXINTERVAL 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ -#define USB_RXTYPE 0xffc03c5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */ -#define USB_RXINTERVAL 0xffc03c60 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */ -#define USB_TXCOUNT 0xffc03c68 /* Number of bytes to be written to the selected endpoint Tx FIFO */ - -/* USB Endpoint FIFO Registers */ - -#define USB_EP0_FIFO 0xffc03c80 /* Endpoint 0 FIFO */ -#define USB_EP1_FIFO 0xffc03c88 /* Endpoint 1 FIFO */ -#define USB_EP2_FIFO 0xffc03c90 /* Endpoint 2 FIFO */ -#define USB_EP3_FIFO 0xffc03c98 /* Endpoint 3 FIFO */ -#define USB_EP4_FIFO 0xffc03ca0 /* Endpoint 4 FIFO */ -#define USB_EP5_FIFO 0xffc03ca8 /* Endpoint 5 FIFO */ -#define USB_EP6_FIFO 0xffc03cb0 /* Endpoint 6 FIFO */ -#define USB_EP7_FIFO 0xffc03cb8 /* Endpoint 7 FIFO */ - -/* USB OTG Control Registers */ - -#define USB_OTG_DEV_CTL 0xffc03d00 /* OTG Device Control Register */ -#define USB_OTG_VBUS_IRQ 0xffc03d04 /* OTG VBUS Control Interrupts */ -#define USB_OTG_VBUS_MASK 0xffc03d08 /* VBUS Control Interrupt Enable */ - -/* USB Phy Control Registers */ - -#define USB_LINKINFO 0xffc03d48 /* Enables programming of some PHY-side delays */ -#define USB_VPLEN 0xffc03d4c /* Determines duration of VBUS pulse for VBUS charging */ -#define USB_HS_EOF1 0xffc03d50 /* Time buffer for High-Speed transactions */ -#define USB_FS_EOF1 0xffc03d54 /* Time buffer for Full-Speed transactions */ -#define USB_LS_EOF1 0xffc03d58 /* Time buffer for Low-Speed transactions */ - -/* (APHY_CNTRL is for ADI usage only) */ - -#define USB_APHY_CNTRL 0xffc03de0 /* Register that increases visibility of Analog PHY */ - -/* (APHY_CALIB is for ADI usage only) */ - -#define USB_APHY_CALIB 0xffc03de4 /* Register used to set some calibration values */ -#define USB_APHY_CNTRL2 0xffc03de8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */ - -/* (PHY_TEST is for ADI usage only) */ - -#define USB_PHY_TEST 0xffc03dec /* Used for reducing simulation time and simplifies FIFO testability */ -#define USB_PLLOSC_CTRL 0xffc03df0 /* Used to program different parameters for USB PLL and Oscillator */ -#define USB_SRP_CLKDIV 0xffc03df4 /* Used to program clock divide value for the clock fed to the SRP detection logic */ - -/* USB Endpoint 0 Control Registers */ - -#define USB_EP_NI0_TXMAXP 0xffc03e00 /* Maximum packet size for Host Tx endpoint0 */ -#define USB_EP_NI0_TXCSR 0xffc03e04 /* Control Status register for endpoint 0 */ -#define USB_EP_NI0_RXMAXP 0xffc03e08 /* Maximum packet size for Host Rx endpoint0 */ -#define USB_EP_NI0_RXCSR 0xffc03e0c /* Control Status register for Host Rx endpoint0 */ -#define USB_EP_NI0_RXCOUNT 0xffc03e10 /* Number of bytes received in endpoint 0 FIFO */ -#define USB_EP_NI0_TXTYPE 0xffc03e14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */ -#define USB_EP_NI0_TXINTERVAL 0xffc03e18 /* Sets the NAK response timeout on Endpoint 0 */ -#define USB_EP_NI0_RXTYPE 0xffc03e1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */ -#define USB_EP_NI0_RXINTERVAL 0xffc03e20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */ - -/* USB Endpoint 1 Control Registers */ - -#define USB_EP_NI0_TXCOUNT 0xffc03e28 /* Number of bytes to be written to the endpoint0 Tx FIFO */ -#define USB_EP_NI1_TXMAXP 0xffc03e40 /* Maximum packet size for Host Tx endpoint1 */ -#define USB_EP_NI1_TXCSR 0xffc03e44 /* Control Status register for endpoint1 */ -#define USB_EP_NI1_RXMAXP 0xffc03e48 /* Maximum packet size for Host Rx endpoint1 */ -#define USB_EP_NI1_RXCSR 0xffc03e4c /* Control Status register for Host Rx endpoint1 */ -#define USB_EP_NI1_RXCOUNT 0xffc03e50 /* Number of bytes received in endpoint1 FIFO */ -#define USB_EP_NI1_TXTYPE 0xffc03e54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */ -#define USB_EP_NI1_TXINTERVAL 0xffc03e58 /* Sets the NAK response timeout on Endpoint1 */ -#define USB_EP_NI1_RXTYPE 0xffc03e5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */ -#define USB_EP_NI1_RXINTERVAL 0xffc03e60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */ - -/* USB Endpoint 2 Control Registers */ - -#define USB_EP_NI1_TXCOUNT 0xffc03e68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */ -#define USB_EP_NI2_TXMAXP 0xffc03e80 /* Maximum packet size for Host Tx endpoint2 */ -#define USB_EP_NI2_TXCSR 0xffc03e84 /* Control Status register for endpoint2 */ -#define USB_EP_NI2_RXMAXP 0xffc03e88 /* Maximum packet size for Host Rx endpoint2 */ -#define USB_EP_NI2_RXCSR 0xffc03e8c /* Control Status register for Host Rx endpoint2 */ -#define USB_EP_NI2_RXCOUNT 0xffc03e90 /* Number of bytes received in endpoint2 FIFO */ -#define USB_EP_NI2_TXTYPE 0xffc03e94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */ -#define USB_EP_NI2_TXINTERVAL 0xffc03e98 /* Sets the NAK response timeout on Endpoint2 */ -#define USB_EP_NI2_RXTYPE 0xffc03e9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */ -#define USB_EP_NI2_RXINTERVAL 0xffc03ea0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */ - -/* USB Endpoint 3 Control Registers */ - -#define USB_EP_NI2_TXCOUNT 0xffc03ea8 /* Number of bytes to be written to the endpoint2 Tx FIFO */ -#define USB_EP_NI3_TXMAXP 0xffc03ec0 /* Maximum packet size for Host Tx endpoint3 */ -#define USB_EP_NI3_TXCSR 0xffc03ec4 /* Control Status register for endpoint3 */ -#define USB_EP_NI3_RXMAXP 0xffc03ec8 /* Maximum packet size for Host Rx endpoint3 */ -#define USB_EP_NI3_RXCSR 0xffc03ecc /* Control Status register for Host Rx endpoint3 */ -#define USB_EP_NI3_RXCOUNT 0xffc03ed0 /* Number of bytes received in endpoint3 FIFO */ -#define USB_EP_NI3_TXTYPE 0xffc03ed4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */ -#define USB_EP_NI3_TXINTERVAL 0xffc03ed8 /* Sets the NAK response timeout on Endpoint3 */ -#define USB_EP_NI3_RXTYPE 0xffc03edc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */ -#define USB_EP_NI3_RXINTERVAL 0xffc03ee0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */ - -/* USB Endpoint 4 Control Registers */ - -#define USB_EP_NI3_TXCOUNT 0xffc03ee8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */ -#define USB_EP_NI4_TXMAXP 0xffc03f00 /* Maximum packet size for Host Tx endpoint4 */ -#define USB_EP_NI4_TXCSR 0xffc03f04 /* Control Status register for endpoint4 */ -#define USB_EP_NI4_RXMAXP 0xffc03f08 /* Maximum packet size for Host Rx endpoint4 */ -#define USB_EP_NI4_RXCSR 0xffc03f0c /* Control Status register for Host Rx endpoint4 */ -#define USB_EP_NI4_RXCOUNT 0xffc03f10 /* Number of bytes received in endpoint4 FIFO */ -#define USB_EP_NI4_TXTYPE 0xffc03f14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */ -#define USB_EP_NI4_TXINTERVAL 0xffc03f18 /* Sets the NAK response timeout on Endpoint4 */ -#define USB_EP_NI4_RXTYPE 0xffc03f1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */ -#define USB_EP_NI4_RXINTERVAL 0xffc03f20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */ - -/* USB Endpoint 5 Control Registers */ - -#define USB_EP_NI4_TXCOUNT 0xffc03f28 /* Number of bytes to be written to the endpoint4 Tx FIFO */ -#define USB_EP_NI5_TXMAXP 0xffc03f40 /* Maximum packet size for Host Tx endpoint5 */ -#define USB_EP_NI5_TXCSR 0xffc03f44 /* Control Status register for endpoint5 */ -#define USB_EP_NI5_RXMAXP 0xffc03f48 /* Maximum packet size for Host Rx endpoint5 */ -#define USB_EP_NI5_RXCSR 0xffc03f4c /* Control Status register for Host Rx endpoint5 */ -#define USB_EP_NI5_RXCOUNT 0xffc03f50 /* Number of bytes received in endpoint5 FIFO */ -#define USB_EP_NI5_TXTYPE 0xffc03f54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */ -#define USB_EP_NI5_TXINTERVAL 0xffc03f58 /* Sets the NAK response timeout on Endpoint5 */ -#define USB_EP_NI5_RXTYPE 0xffc03f5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */ -#define USB_EP_NI5_RXINTERVAL 0xffc03f60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */ - -/* USB Endpoint 6 Control Registers */ - -#define USB_EP_NI5_TXCOUNT 0xffc03f68 /* Number of bytes to be written to the H145endpoint5 Tx FIFO */ -#define USB_EP_NI6_TXMAXP 0xffc03f80 /* Maximum packet size for Host Tx endpoint6 */ -#define USB_EP_NI6_TXCSR 0xffc03f84 /* Control Status register for endpoint6 */ -#define USB_EP_NI6_RXMAXP 0xffc03f88 /* Maximum packet size for Host Rx endpoint6 */ -#define USB_EP_NI6_RXCSR 0xffc03f8c /* Control Status register for Host Rx endpoint6 */ -#define USB_EP_NI6_RXCOUNT 0xffc03f90 /* Number of bytes received in endpoint6 FIFO */ -#define USB_EP_NI6_TXTYPE 0xffc03f94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */ -#define USB_EP_NI6_TXINTERVAL 0xffc03f98 /* Sets the NAK response timeout on Endpoint6 */ -#define USB_EP_NI6_RXTYPE 0xffc03f9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */ -#define USB_EP_NI6_RXINTERVAL 0xffc03fa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */ - -/* USB Endpoint 7 Control Registers */ - -#define USB_EP_NI6_TXCOUNT 0xffc03fa8 /* Number of bytes to be written to the endpoint6 Tx FIFO */ -#define USB_EP_NI7_TXMAXP 0xffc03fc0 /* Maximum packet size for Host Tx endpoint7 */ -#define USB_EP_NI7_TXCSR 0xffc03fc4 /* Control Status register for endpoint7 */ -#define USB_EP_NI7_RXMAXP 0xffc03fc8 /* Maximum packet size for Host Rx endpoint7 */ -#define USB_EP_NI7_RXCSR 0xffc03fcc /* Control Status register for Host Rx endpoint7 */ -#define USB_EP_NI7_RXCOUNT 0xffc03fd0 /* Number of bytes received in endpoint7 FIFO */ -#define USB_EP_NI7_TXTYPE 0xffc03fd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */ -#define USB_EP_NI7_TXINTERVAL 0xffc03fd8 /* Sets the NAK response timeout on Endpoint7 */ -#define USB_EP_NI7_RXTYPE 0xffc03fdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */ -#define USB_EP_NI7_RXINTERVAL 0xffc03ff0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */ -#define USB_EP_NI7_TXCOUNT 0xffc03ff8 /* Number of bytes to be written to the endpoint7 Tx FIFO */ -#define USB_DMA_INTERRUPT 0xffc04000 /* Indicates pending interrupts for the DMA channels */ - -/* USB Channel 0 Config Registers */ - -#define USB_DMA0CONTROL 0xffc04004 /* DMA master channel 0 configuration */ -#define USB_DMA0ADDRLOW 0xffc04008 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */ -#define USB_DMA0ADDRHIGH 0xffc0400c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */ -#define USB_DMA0COUNTLOW 0xffc04010 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */ -#define USB_DMA0COUNTHIGH 0xffc04014 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */ - -/* USB Channel 1 Config Registers */ - -#define USB_DMA1CONTROL 0xffc04024 /* DMA master channel 1 configuration */ -#define USB_DMA1ADDRLOW 0xffc04028 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */ -#define USB_DMA1ADDRHIGH 0xffc0402c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */ -#define USB_DMA1COUNTLOW 0xffc04030 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */ -#define USB_DMA1COUNTHIGH 0xffc04034 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */ - -/* USB Channel 2 Config Registers */ - -#define USB_DMA2CONTROL 0xffc04044 /* DMA master channel 2 configuration */ -#define USB_DMA2ADDRLOW 0xffc04048 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */ -#define USB_DMA2ADDRHIGH 0xffc0404c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */ -#define USB_DMA2COUNTLOW 0xffc04050 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */ -#define USB_DMA2COUNTHIGH 0xffc04054 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */ - -/* USB Channel 3 Config Registers */ - -#define USB_DMA3CONTROL 0xffc04064 /* DMA master channel 3 configuration */ -#define USB_DMA3ADDRLOW 0xffc04068 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */ -#define USB_DMA3ADDRHIGH 0xffc0406c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */ -#define USB_DMA3COUNTLOW 0xffc04070 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */ -#define USB_DMA3COUNTHIGH 0xffc04074 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */ - -/* USB Channel 4 Config Registers */ - -#define USB_DMA4CONTROL 0xffc04084 /* DMA master channel 4 configuration */ -#define USB_DMA4ADDRLOW 0xffc04088 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */ -#define USB_DMA4ADDRHIGH 0xffc0408c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */ -#define USB_DMA4COUNTLOW 0xffc04090 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */ -#define USB_DMA4COUNTHIGH 0xffc04094 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */ - -/* USB Channel 5 Config Registers */ - -#define USB_DMA5CONTROL 0xffc040a4 /* DMA master channel 5 configuration */ -#define USB_DMA5ADDRLOW 0xffc040a8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */ -#define USB_DMA5ADDRHIGH 0xffc040ac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */ -#define USB_DMA5COUNTLOW 0xffc040b0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */ -#define USB_DMA5COUNTHIGH 0xffc040b4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */ - -/* USB Channel 6 Config Registers */ - -#define USB_DMA6CONTROL 0xffc040c4 /* DMA master channel 6 configuration */ -#define USB_DMA6ADDRLOW 0xffc040c8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */ -#define USB_DMA6ADDRHIGH 0xffc040cc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */ -#define USB_DMA6COUNTLOW 0xffc040d0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */ -#define USB_DMA6COUNTHIGH 0xffc040d4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */ - -/* USB Channel 7 Config Registers */ - -#define USB_DMA7CONTROL 0xffc040e4 /* DMA master channel 7 configuration */ -#define USB_DMA7ADDRLOW 0xffc040e8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */ -#define USB_DMA7ADDRHIGH 0xffc040ec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */ -#define USB_DMA7COUNTLOW 0xffc040f0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */ -#define USB_DMA7COUNTHIGH 0xffc040f4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */ - -/* Keypad Registers */ - -#define KPAD_CTL 0xffc04100 /* Controls keypad module enable and disable */ -#define KPAD_PRESCALE 0xffc04104 /* Establish a time base for programing the KPAD_MSEL register */ -#define KPAD_MSEL 0xffc04108 /* Selects delay parameters for keypad interface sensitivity */ -#define KPAD_ROWCOL 0xffc0410c /* Captures the row and column output values of the keys pressed */ -#define KPAD_STAT 0xffc04110 /* Holds and clears the status of the keypad interface interrupt */ -#define KPAD_SOFTEVAL 0xffc04114 /* Lets software force keypad interface to check for keys being pressed */ - -/* Pixel Compositor (PIXC) Registers */ - -#define PIXC_CTL 0xffc04400 /* Overlay enable, resampling mode, I/O data format, transparency enable, watermark level, FIFO status */ -#define PIXC_PPL 0xffc04404 /* Holds the number of pixels per line of the display */ -#define PIXC_LPF 0xffc04408 /* Holds the number of lines per frame of the display */ -#define PIXC_AHSTART 0xffc0440c /* Contains horizontal start pixel information of the overlay data (set A) */ -#define PIXC_AHEND 0xffc04410 /* Contains horizontal end pixel information of the overlay data (set A) */ -#define PIXC_AVSTART 0xffc04414 /* Contains vertical start pixel information of the overlay data (set A) */ -#define PIXC_AVEND 0xffc04418 /* Contains vertical end pixel information of the overlay data (set A) */ -#define PIXC_ATRANSP 0xffc0441c /* Contains the transparency ratio (set A) */ -#define PIXC_BHSTART 0xffc04420 /* Contains horizontal start pixel information of the overlay data (set B) */ -#define PIXC_BHEND 0xffc04424 /* Contains horizontal end pixel information of the overlay data (set B) */ -#define PIXC_BVSTART 0xffc04428 /* Contains vertical start pixel information of the overlay data (set B) */ -#define PIXC_BVEND 0xffc0442c /* Contains vertical end pixel information of the overlay data (set B) */ -#define PIXC_BTRANSP 0xffc04430 /* Contains the transparency ratio (set B) */ -#define PIXC_INTRSTAT 0xffc0443c /* Overlay interrupt configuration/status */ -#define PIXC_RYCON 0xffc04440 /* Color space conversion matrix register. Contains the R/Y conversion coefficients */ -#define PIXC_GUCON 0xffc04444 /* Color space conversion matrix register. Contains the G/U conversion coefficients */ -#define PIXC_BVCON 0xffc04448 /* Color space conversion matrix register. Contains the B/V conversion coefficients */ -#define PIXC_CCBIAS 0xffc0444c /* Bias values for the color space conversion matrix */ -#define PIXC_TC 0xffc04450 /* Holds the transparent color value */ - -/* Handshake MDMA 0 Registers */ - -#define HMDMA0_CONTROL 0xffc04500 /* Handshake MDMA0 Control Register */ -#define HMDMA0_ECINIT 0xffc04504 /* Handshake MDMA0 Initial Edge Count Register */ -#define HMDMA0_BCINIT 0xffc04508 /* Handshake MDMA0 Initial Block Count Register */ -#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshold Register */ -#define HMDMA0_ECOVERFLOW 0xffc04510 /* Handshake MDMA0 Edge Count Overflow Interrupt Register */ -#define HMDMA0_ECOUNT 0xffc04514 /* Handshake MDMA0 Current Edge Count Register */ -#define HMDMA0_BCOUNT 0xffc04518 /* Handshake MDMA0 Current Block Count Register */ - -/* Handshake MDMA 1 Registers */ - -#define HMDMA1_CONTROL 0xffc04540 /* Handshake MDMA1 Control Register */ -#define HMDMA1_ECINIT 0xffc04544 /* Handshake MDMA1 Initial Edge Count Register */ -#define HMDMA1_BCINIT 0xffc04548 /* Handshake MDMA1 Initial Block Count Register */ -#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshold Register */ -#define HMDMA1_ECOVERFLOW 0xffc04550 /* Handshake MDMA1 Edge Count Overflow Interrupt Register */ -#define HMDMA1_ECOUNT 0xffc04554 /* Handshake MDMA1 Current Edge Count Register */ -#define HMDMA1_BCOUNT 0xffc04558 /* Handshake MDMA1 Current Block Count Register */ - - -/* ********************************************************** */ -/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */ -/* and MULTI BIT READ MACROS */ -/* ********************************************************** */ - -/* Bit masks for PIXC_CTL */ - -#define PIXC_EN 0x1 /* Pixel Compositor Enable */ -#define OVR_A_EN 0x2 /* Overlay A Enable */ -#define OVR_B_EN 0x4 /* Overlay B Enable */ -#define IMG_FORM 0x8 /* Image Data Format */ -#define OVR_FORM 0x10 /* Overlay Data Format */ -#define OUT_FORM 0x20 /* Output Data Format */ -#define UDS_MOD 0x40 /* Resampling Mode */ -#define TC_EN 0x80 /* Transparent Color Enable */ -#define IMG_STAT 0x300 /* Image FIFO Status */ -#define OVR_STAT 0xc00 /* Overlay FIFO Status */ -#define WM_LVL 0x3000 /* FIFO Watermark Level */ - -/* Bit masks for PIXC_AHSTART */ - -#define A_HSTART 0xfff /* Horizontal Start Coordinates */ - -/* Bit masks for PIXC_AHEND */ - -#define A_HEND 0xfff /* Horizontal End Coordinates */ - -/* Bit masks for PIXC_AVSTART */ - -#define A_VSTART 0x3ff /* Vertical Start Coordinates */ - -/* Bit masks for PIXC_AVEND */ - -#define A_VEND 0x3ff /* Vertical End Coordinates */ - -/* Bit masks for PIXC_ATRANSP */ - -#define A_TRANSP 0xf /* Transparency Value */ - -/* Bit masks for PIXC_BHSTART */ - -#define B_HSTART 0xfff /* Horizontal Start Coordinates */ - -/* Bit masks for PIXC_BHEND */ - -#define B_HEND 0xfff /* Horizontal End Coordinates */ - -/* Bit masks for PIXC_BVSTART */ - -#define B_VSTART 0x3ff /* Vertical Start Coordinates */ - -/* Bit masks for PIXC_BVEND */ - -#define B_VEND 0x3ff /* Vertical End Coordinates */ - -/* Bit masks for PIXC_BTRANSP */ - -#define B_TRANSP 0xf /* Transparency Value */ - -/* Bit masks for PIXC_INTRSTAT */ - -#define OVR_INT_EN 0x1 /* Interrupt at End of Last Valid Overlay */ -#define FRM_INT_EN 0x2 /* Interrupt at End of Frame */ -#define OVR_INT_STAT 0x4 /* Overlay Interrupt Status */ -#define FRM_INT_STAT 0x8 /* Frame Interrupt Status */ - -/* Bit masks for PIXC_RYCON */ - -#define A11 0x3ff /* A11 in the Coefficient Matrix */ -#define A12 0xffc00 /* A12 in the Coefficient Matrix */ -#define A13 0x3ff00000 /* A13 in the Coefficient Matrix */ -#define RY_MULT4 0x40000000 /* Multiply Row by 4 */ - -/* Bit masks for PIXC_GUCON */ - -#define A21 0x3ff /* A21 in the Coefficient Matrix */ -#define A22 0xffc00 /* A22 in the Coefficient Matrix */ -#define A23 0x3ff00000 /* A23 in the Coefficient Matrix */ -#define GU_MULT4 0x40000000 /* Multiply Row by 4 */ - -/* Bit masks for PIXC_BVCON */ - -#define A31 0x3ff /* A31 in the Coefficient Matrix */ -#define A32 0xffc00 /* A32 in the Coefficient Matrix */ -#define A33 0x3ff00000 /* A33 in the Coefficient Matrix */ -#define BV_MULT4 0x40000000 /* Multiply Row by 4 */ - -/* Bit masks for PIXC_CCBIAS */ - -#define A14 0x3ff /* A14 in the Bias Vector */ -#define A24 0xffc00 /* A24 in the Bias Vector */ -#define A34 0x3ff00000 /* A34 in the Bias Vector */ - -/* Bit masks for PIXC_TC */ - -#define RY_TRANS 0xff /* Transparent Color - R/Y Component */ -#define GU_TRANS 0xff00 /* Transparent Color - G/U Component */ -#define BV_TRANS 0xff0000 /* Transparent Color - B/V Component */ - -/* Bit masks for HOST_CONTROL */ - -#define HOST_EN 0x1 /* Host Enable */ -#define HOST_END 0x2 /* Host Endianess */ -#define DATA_SIZE 0x4 /* Data Size */ -#define HOST_RST 0x8 /* Host Reset */ -#define HRDY_OVR 0x20 /* Host Ready Override */ -#define INT_MODE 0x40 /* Interrupt Mode */ -#define BT_EN 0x80 /* Bus Timeout Enable */ -#define EHW 0x100 /* Enable Host Write */ -#define EHR 0x200 /* Enable Host Read */ -#define BDR 0x400 /* Burst DMA Requests */ - -/* Bit masks for HOST_STATUS */ - -#define DMA_READY 0x1 /* DMA Ready */ -#define FIFOFULL 0x2 /* FIFO Full */ -#define FIFOEMPTY 0x4 /* FIFO Empty */ -#define DMA_COMPLETE 0x8 /* DMA Complete */ -#define HSHK 0x10 /* Host Handshake */ -#define HSTIMEOUT 0x20 /* Host Timeout */ -#define HIRQ 0x40 /* Host Interrupt Request */ -#define ALLOW_CNFG 0x80 /* Allow New Configuration */ -#define DMA_DIR 0x100 /* DMA Direction */ -#define BTE 0x200 /* Bus Timeout Enabled */ - -/* Bit masks for HOST_TIMEOUT */ - -#define COUNT_TIMEOUT 0x7ff /* Host Timeout count */ - -/* Bit masks for KPAD_CTL */ - -#define KPAD_EN 0x1 /* Keypad Enable */ -#define KPAD_IRQMODE 0x6 /* Key Press Interrupt Enable */ -#define KPAD_ROWEN 0x1c00 /* Row Enable Width */ -#define KPAD_COLEN 0xe000 /* Column Enable Width */ - -/* Bit masks for KPAD_PRESCALE */ - -#define KPAD_PRESCALE_VAL 0x3f /* Key Prescale Value */ - -/* Bit masks for KPAD_MSEL */ - -#define DBON_SCALE 0xff /* Debounce Scale Value */ -#define COLDRV_SCALE 0xff00 /* Column Driver Scale Value */ - -/* Bit masks for KPAD_ROWCOL */ - -#define KPAD_ROW 0xff /* Rows Pressed */ -#define KPAD_COL 0xff00 /* Columns Pressed */ - -/* Bit masks for KPAD_STAT */ - -#define KPAD_IRQ 0x1 /* Keypad Interrupt Status */ -#define KPAD_MROWCOL 0x6 /* Multiple Row/Column Keypress Status */ -#define KPAD_PRESSED 0x8 /* Key press current status */ - -/* Bit masks for KPAD_SOFTEVAL */ - -#define KPAD_SOFTEVAL_E 0x2 /* Software Programmable Force Evaluate */ - -/* Bit masks for SDH_COMMAND */ - -#define CMD_IDX 0x3f /* Command Index */ -#define CMD_RSP 0x40 /* Response */ -#define CMD_L_RSP 0x80 /* Long Response */ -#define CMD_INT_E 0x100 /* Command Interrupt */ -#define CMD_PEND_E 0x200 /* Command Pending */ -#define CMD_E 0x400 /* Command Enable */ - -/* Bit masks for SDH_PWR_CTL */ - -#define PWR_ON 0x3 /* Power On */ -#if 0 -#define TBD 0x3c /* TBD */ -#endif -#define SD_CMD_OD 0x40 /* Open Drain Output */ -#define ROD_CTL 0x80 /* Rod Control */ - -/* Bit masks for SDH_CLK_CTL */ - -#define CLKDIV 0xff /* MC_CLK Divisor */ -#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */ -#define PWR_SV_E 0x200 /* Power Save Enable */ -#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */ -#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */ - -/* Bit masks for SDH_RESP_CMD */ - -#define RESP_CMD 0x3f /* Response Command */ - -/* Bit masks for SDH_DATA_CTL */ - -#define DTX_E 0x1 /* Data Transfer Enable */ -#define DTX_DIR 0x2 /* Data Transfer Direction */ -#define DTX_MODE 0x4 /* Data Transfer Mode */ -#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */ -#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */ - -/* Bit masks for SDH_STATUS */ - -#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */ -#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */ -#define CMD_TIME_OUT 0x4 /* CMD Time Out */ -#define DAT_TIME_OUT 0x8 /* Data Time Out */ -#define TX_UNDERRUN 0x10 /* Transmit Underrun */ -#define RX_OVERRUN 0x20 /* Receive Overrun */ -#define CMD_RESP_END 0x40 /* CMD Response End */ -#define CMD_SENT 0x80 /* CMD Sent */ -#define DAT_END 0x100 /* Data End */ -#define START_BIT_ERR 0x200 /* Start Bit Error */ -#define DAT_BLK_END 0x400 /* Data Block End */ -#define CMD_ACT 0x800 /* CMD Active */ -#define TX_ACT 0x1000 /* Transmit Active */ -#define RX_ACT 0x2000 /* Receive Active */ -#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */ -#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */ -#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */ -#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */ -#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */ -#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */ -#define TX_DAT_RDY 0x100000 /* Transmit Data Available */ -#define RX_FIFO_RDY 0x200000 /* Receive Data Available */ - -/* Bit masks for SDH_STATUS_CLR */ - -#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */ -#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */ -#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */ -#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */ -#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */ -#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */ -#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */ -#define CMD_SENT_STAT 0x80 /* CMD Sent Status */ -#define DAT_END_STAT 0x100 /* Data End Status */ -#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */ -#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */ - -/* Bit masks for SDH_MASK0 */ - -#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */ -#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */ -#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */ -#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */ -#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */ -#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */ -#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */ -#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */ -#define DAT_END_MASK 0x100 /* Data End Mask */ -#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */ -#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */ -#define CMD_ACT_MASK 0x800 /* CMD Active Mask */ -#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */ -#define RX_ACT_MASK 0x2000 /* Receive Active Mask */ -#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */ -#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */ -#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */ -#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */ -#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */ -#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */ -#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */ -#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */ - -/* Bit masks for SDH_FIFO_CNT */ - -#define FIFO_COUNT 0x7fff /* FIFO Count */ - -/* Bit masks for SDH_E_STATUS */ - -#define SDIO_INT_DET 0x2 /* SDIO Int Detected */ -#define SD_CARD_DET 0x10 /* SD Card Detect */ - -/* Bit masks for SDH_E_MASK */ - -#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */ -#define SCD_MSK 0x40 /* Mask Card Detect */ - -/* Bit masks for SDH_CFG */ - -#define CLKS_EN 0x1 /* Clocks Enable */ -#define SD4E 0x4 /* SDIO 4-Bit Enable */ -#define MWE 0x8 /* Moving Window Enable */ -#define SD_RST 0x10 /* SDMMC Reset */ -#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */ -#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */ -#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */ - -/* Bit masks for SDH_RD_WAIT_EN */ - -#define RWR 0x1 /* Read Wait Request */ - -/* Bit masks for ATAPI_CONTROL */ - -#define PIO_START 0x1 /* Start PIO/Reg Op */ -#define MULTI_START 0x2 /* Start Multi-DMA Op */ -#define ULTRA_START 0x4 /* Start Ultra-DMA Op */ -#define XFER_DIR 0x8 /* Transfer Direction */ -#define IORDY_EN 0x10 /* IORDY Enable */ -#define FIFO_FLUSH 0x20 /* Flush FIFOs */ -#define SOFT_RST 0x40 /* Soft Reset */ -#define DEV_RST 0x80 /* Device Reset */ -#define TFRCNT_RST 0x100 /* Trans Count Reset */ -#define END_ON_TERM 0x200 /* End/Terminate Select */ -#define PIO_USE_DMA 0x400 /* PIO-DMA Enable */ -#define UDMAIN_FIFO_THRS 0xf000 /* Ultra DMA-IN FIFO Threshold */ - -/* Bit masks for ATAPI_STATUS */ - -#define PIO_XFER_ON 0x1 /* PIO transfer in progress */ -#define MULTI_XFER_ON 0x2 /* Multi-word DMA transfer in progress */ -#define ULTRA_XFER_ON 0x4 /* Ultra DMA transfer in progress */ -#define ULTRA_IN_FL 0xf0 /* Ultra DMA Input FIFO Level */ - -/* Bit masks for ATAPI_DEV_ADDR */ - -#define DEV_ADDR 0x1f /* Device Address */ - -/* Bit masks for ATAPI_INT_MASK */ - -#define ATAPI_DEV_INT_MASK 0x1 /* Device interrupt mask */ -#define PIO_DONE_MASK 0x2 /* PIO transfer done interrupt mask */ -#define MULTI_DONE_MASK 0x4 /* Multi-DMA transfer done interrupt mask */ -#define UDMAIN_DONE_MASK 0x8 /* Ultra-DMA in transfer done interrupt mask */ -#define UDMAOUT_DONE_MASK 0x10 /* Ultra-DMA out transfer done interrupt mask */ -#define HOST_TERM_XFER_MASK 0x20 /* Host terminate current transfer interrupt mask */ -#define MULTI_TERM_MASK 0x40 /* Device terminate Multi-DMA transfer interrupt mask */ -#define UDMAIN_TERM_MASK 0x80 /* Device terminate Ultra-DMA-in transfer interrupt mask */ -#define UDMAOUT_TERM_MASK 0x100 /* Device terminate Ultra-DMA-out transfer interrupt mask */ - -/* Bit masks for ATAPI_INT_STATUS */ - -#define ATAPI_DEV_INT 0x1 /* Device interrupt status */ -#define PIO_DONE_INT 0x2 /* PIO transfer done interrupt status */ -#define MULTI_DONE_INT 0x4 /* Multi-DMA transfer done interrupt status */ -#define UDMAIN_DONE_INT 0x8 /* Ultra-DMA in transfer done interrupt status */ -#define UDMAOUT_DONE_INT 0x10 /* Ultra-DMA out transfer done interrupt status */ -#define HOST_TERM_XFER_INT 0x20 /* Host terminate current transfer interrupt status */ -#define MULTI_TERM_INT 0x40 /* Device terminate Multi-DMA transfer interrupt status */ -#define UDMAIN_TERM_INT 0x80 /* Device terminate Ultra-DMA-in transfer interrupt status */ -#define UDMAOUT_TERM_INT 0x100 /* Device terminate Ultra-DMA-out transfer interrupt status */ - -/* Bit masks for ATAPI_LINE_STATUS */ - -#define ATAPI_INTR 0x1 /* Device interrupt to host line status */ -#define ATAPI_DASP 0x2 /* Device dasp to host line status */ -#define ATAPI_CS0N 0x4 /* ATAPI chip select 0 line status */ -#define ATAPI_CS1N 0x8 /* ATAPI chip select 1 line status */ -#define ATAPI_ADDR 0x70 /* ATAPI address line status */ -#define ATAPI_DMAREQ 0x80 /* ATAPI DMA request line status */ -#define ATAPI_DMAACKN 0x100 /* ATAPI DMA acknowledge line status */ -#define ATAPI_DIOWN 0x200 /* ATAPI write line status */ -#define ATAPI_DIORN 0x400 /* ATAPI read line status */ -#define ATAPI_IORDY 0x800 /* ATAPI IORDY line status */ - -/* Bit masks for ATAPI_SM_STATE */ - -#define PIO_CSTATE 0xf /* PIO mode state machine current state */ -#define DMA_CSTATE 0xf0 /* DMA mode state machine current state */ -#define UDMAIN_CSTATE 0xf00 /* Ultra DMA-In mode state machine current state */ -#define UDMAOUT_CSTATE 0xf000 /* ATAPI IORDY line status */ - -/* Bit masks for ATAPI_TERMINATE */ - -#define ATAPI_HOST_TERM 0x1 /* Host terminationation */ - -/* Bit masks for ATAPI_REG_TIM_0 */ - -#define T2_REG 0xff /* End of cycle time for register access transfers */ -#define TEOC_REG 0xff00 /* Selects DIOR/DIOW pulsewidth */ - -/* Bit masks for ATAPI_PIO_TIM_0 */ - -#define T1_REG 0xf /* Time from address valid to DIOR/DIOW */ -#define T2_REG_PIO 0xff0 /* DIOR/DIOW pulsewidth */ -#define T4_REG 0xf000 /* DIOW data hold */ - -/* Bit masks for ATAPI_PIO_TIM_1 */ - -#define TEOC_REG_PIO 0xff /* End of cycle time for PIO access transfers. */ - -/* Bit masks for ATAPI_MULTI_TIM_0 */ - -#define TD 0xff /* DIOR/DIOW asserted pulsewidth */ -#define TM 0xff00 /* Time from address valid to DIOR/DIOW */ - -/* Bit masks for ATAPI_MULTI_TIM_1 */ - -#define TKW 0xff /* Selects DIOW negated pulsewidth */ -#define TKR 0xff00 /* Selects DIOR negated pulsewidth */ - -/* Bit masks for ATAPI_MULTI_TIM_2 */ - -#define TH 0xff /* Selects DIOW data hold */ -#define TEOC 0xff00 /* Selects end of cycle for DMA */ - -/* Bit masks for ATAPI_ULTRA_TIM_0 */ - -#define TACK 0xff /* Selects setup and hold times for TACK */ -#define TENV 0xff00 /* Selects envelope time */ - -/* Bit masks for ATAPI_ULTRA_TIM_1 */ - -#define TDVS 0xff /* Selects data valid setup time */ -#define TCYC_TDVS 0xff00 /* Selects cycle time - TDVS time */ - -/* Bit masks for ATAPI_ULTRA_TIM_2 */ - -#define TSS 0xff /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */ -#define TMLI 0xff00 /* Selects interlock time */ - -/* Bit masks for ATAPI_ULTRA_TIM_3 */ - -#define TZAH 0xff /* Selects minimum delay required for output */ -#define READY_PAUSE 0xff00 /* Selects ready to pause */ - -/* Bit masks for TIMER_ENABLE1 */ - -#define TIMEN8 0x1 /* Timer 8 Enable */ -#define TIMEN9 0x2 /* Timer 9 Enable */ -#define TIMEN10 0x4 /* Timer 10 Enable */ - -/* Bit masks for TIMER_DISABLE1 */ - -#define TIMDIS8 0x1 /* Timer 8 Disable */ -#define TIMDIS9 0x2 /* Timer 9 Disable */ -#define TIMDIS10 0x4 /* Timer 10 Disable */ - -/* Bit masks for TIMER_STATUS1 */ - -#define TIMIL8 0x1 /* Timer 8 Interrupt */ -#define TIMIL9 0x2 /* Timer 9 Interrupt */ -#define TIMIL10 0x4 /* Timer 10 Interrupt */ -#define TOVF_ERR8 0x10 /* Timer 8 Counter Overflow */ -#define TOVF_ERR9 0x20 /* Timer 9 Counter Overflow */ -#define TOVF_ERR10 0x40 /* Timer 10 Counter Overflow */ -#define TRUN8 0x1000 /* Timer 8 Slave Enable Status */ -#define TRUN9 0x2000 /* Timer 9 Slave Enable Status */ -#define TRUN10 0x4000 /* Timer 10 Slave Enable Status */ - -/* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */ - -/* Bit masks for USB_FADDR */ - -#define FUNCTION_ADDRESS 0x7f /* Function address */ - -/* Bit masks for USB_POWER */ - -#define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */ -#define SUSPEND_MODE 0x2 /* Suspend Mode indicator */ -#define RESUME_MODE 0x4 /* DMA Mode */ -#define RESET 0x8 /* Reset indicator */ -#define HS_MODE 0x10 /* High Speed mode indicator */ -#define HS_ENABLE 0x20 /* high Speed Enable */ -#define SOFT_CONN 0x40 /* Soft connect */ -#define ISO_UPDATE 0x80 /* Isochronous update */ - -/* Bit masks for USB_INTRTX */ - -#define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */ -#define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */ -#define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */ -#define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */ -#define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */ -#define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */ -#define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */ -#define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */ - -/* Bit masks for USB_INTRRX */ - -#define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */ -#define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */ -#define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */ -#define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */ -#define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */ -#define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */ -#define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */ - -/* Bit masks for USB_INTRTXE */ - -#define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */ -#define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */ -#define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */ -#define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */ -#define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */ -#define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */ -#define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */ -#define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */ - -/* Bit masks for USB_INTRRXE */ - -#define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */ -#define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */ -#define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */ -#define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */ -#define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */ -#define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */ -#define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */ - -/* Bit masks for USB_INTRUSB */ - -#define SUSPEND_B 0x1 /* Suspend indicator */ -#define RESUME_B 0x2 /* Resume indicator */ -#define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */ -#define SOF_B 0x8 /* Start of frame */ -#define CONN_B 0x10 /* Connection indicator */ -#define DISCON_B 0x20 /* Disconnect indicator */ -#define SESSION_REQ_B 0x40 /* Session Request */ -#define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */ - -/* Bit masks for USB_INTRUSBE */ - -#define SUSPEND_BE 0x1 /* Suspend indicator int enable */ -#define RESUME_BE 0x2 /* Resume indicator int enable */ -#define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */ -#define SOF_BE 0x8 /* Start of frame int enable */ -#define CONN_BE 0x10 /* Connection indicator int enable */ -#define DISCON_BE 0x20 /* Disconnect indicator int enable */ -#define SESSION_REQ_BE 0x40 /* Session Request int enable */ -#define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */ - -/* Bit masks for USB_FRAME */ - -#define FRAME_NUMBER 0x7ff /* Frame number */ - -/* Bit masks for USB_INDEX */ - -#define SELECTED_ENDPOINT 0xf /* selected endpoint */ - -/* Bit masks for USB_GLOBAL_CTL */ - -#define GLOBAL_ENA 0x1 /* enables USB module */ -#define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */ -#define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */ -#define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */ -#define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */ -#define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */ -#define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */ -#define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */ -#define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */ -#define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */ -#define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */ -#define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */ -#define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */ -#define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */ -#define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */ - -/* Bit masks for USB_OTG_DEV_CTL */ - -#define SESSION 0x1 /* session indicator */ -#define HOST_REQ 0x2 /* Host negotiation request */ -#define HOST_MODE 0x4 /* indicates USBDRC is a host */ -#define VBUS0 0x8 /* Vbus level indicator[0] */ -#define VBUS1 0x10 /* Vbus level indicator[1] */ -#define LSDEV 0x20 /* Low-speed indicator */ -#define FSDEV 0x40 /* Full or High-speed indicator */ -#define B_DEVICE 0x80 /* A' or 'B' device indicator */ - -/* Bit masks for USB_OTG_VBUS_IRQ */ - -#define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */ -#define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */ -#define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */ -#define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */ -#define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */ -#define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */ - -/* Bit masks for USB_OTG_VBUS_MASK */ - -#define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */ -#define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */ -#define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */ -#define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */ -#define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */ -#define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */ - -/* Bit masks for USB_CSR0 */ - -#define RXPKTRDY 0x1 /* data packet receive indicator */ -#define TXPKTRDY 0x2 /* data packet in FIFO indicator */ -#define STALL_SENT 0x4 /* STALL handshake sent */ -#define DATAEND 0x8 /* Data end indicator */ -#define SETUPEND 0x10 /* Setup end */ -#define SENDSTALL 0x20 /* Send STALL handshake */ -#define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */ -#define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */ -#define FLUSHFIFO 0x100 /* flush endpoint FIFO */ -#define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */ -#define SETUPPKT_H 0x8 /* send Setup token host mode */ -#define ERROR_H 0x10 /* timeout error indicator host mode */ -#define REQPKT_H 0x20 /* Request an IN transaction host mode */ -#define STATUSPKT_H 0x40 /* Status stage transaction host mode */ -#define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */ - -/* Bit masks for USB_COUNT0 */ - -#define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */ - -/* Bit masks for USB_NAKLIMIT0 */ - -#define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */ - -/* Bit masks for USB_TX_MAX_PACKET */ - -#define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */ - -/* Bit masks for USB_RX_MAX_PACKET */ - -#define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */ - -/* Bit masks for USB_TXCSR */ - -#define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */ -#define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */ -#define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */ -#define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */ -#define STALL_SEND_T 0x10 /* issue a Stall handshake */ -#define STALL_SENT_T 0x20 /* Stall handshake transmitted */ -#define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */ -#define INCOMPTX_T 0x80 /* indicates that a large packet is split */ -#define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */ -#define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */ -#define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */ -#define ISO_T 0x4000 /* enable Isochronous transfers */ -#define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */ -#define ERROR_TH 0x4 /* error condition host mode */ -#define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */ -#define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */ - -/* Bit masks for USB_TXCOUNT */ - -#define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */ - -/* Bit masks for USB_RXCSR */ - -#define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */ -#define FIFO_FULL_R 0x2 /* FIFO not empty */ -#define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */ -#define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */ -#define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */ -#define STALL_SEND_R 0x20 /* issue a Stall handshake */ -#define STALL_SENT_R 0x40 /* Stall handshake transmitted */ -#define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */ -#define INCOMPRX_R 0x100 /* indicates that a large packet is split */ -#define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */ -#define DISNYET_R 0x1000 /* disable Nyet handshakes */ -#define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */ -#define ISO_R 0x4000 /* enable Isochronous transfers */ -#define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */ -#define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */ -#define REQPKT_RH 0x20 /* request an IN transaction host mode */ -#define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */ -#define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */ -#define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */ -#define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */ - -/* Bit masks for USB_RXCOUNT */ - -#define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */ - -/* Bit masks for USB_TXTYPE */ - -#define TARGET_EP_NO_T 0xf /* EP number */ -#define PROTOCOL_T 0xc /* transfer type */ - -/* Bit masks for USB_TXINTERVAL */ - -#define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */ - -/* Bit masks for USB_RXTYPE */ - -#define TARGET_EP_NO_R 0xf /* EP number */ -#define PROTOCOL_R 0xc /* transfer type */ - -/* Bit masks for USB_RXINTERVAL */ - -#define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */ - -/* Bit masks for USB_DMA_INTERRUPT */ - -#define DMA0_INT 0x1 /* DMA0 pending interrupt */ -#define DMA1_INT 0x2 /* DMA1 pending interrupt */ -#define DMA2_INT 0x4 /* DMA2 pending interrupt */ -#define DMA3_INT 0x8 /* DMA3 pending interrupt */ -#define DMA4_INT 0x10 /* DMA4 pending interrupt */ -#define DMA5_INT 0x20 /* DMA5 pending interrupt */ -#define DMA6_INT 0x40 /* DMA6 pending interrupt */ -#define DMA7_INT 0x80 /* DMA7 pending interrupt */ - -/* Bit masks for USB_DMAxCONTROL */ - -#define DMA_ENA 0x1 /* DMA enable */ -#define DIRECTION 0x2 /* direction of DMA transfer */ -#define MODE 0x4 /* DMA Bus error */ -#define INT_ENA 0x8 /* Interrupt enable */ -#define EPNUM 0xf0 /* EP number */ -#define BUSERROR 0x100 /* DMA Bus error */ - -/* Bit masks for USB_DMAxADDRHIGH */ - -#define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */ - -/* Bit masks for USB_DMAxADDRLOW */ - -#define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */ - -/* Bit masks for USB_DMAxCOUNTHIGH */ - -#define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */ - -/* Bit masks for USB_DMAxCOUNTLOW */ - -#define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */ - -/* Bit masks for HMDMAx_CONTROL */ - -#define HMDMAEN 0x1 /* Handshake MDMA Enable */ -#define REP 0x2 /* Handshake MDMA Request Polarity */ -#define UTE 0x8 /* Urgency Threshold Enable */ -#define OIE 0x10 /* Overflow Interrupt Enable */ -#define BDIE 0x20 /* Block Done Interrupt Enable */ -#define MBDI 0x40 /* Mask Block Done Interrupt */ -#define DRQ 0x300 /* Handshake MDMA Request Type */ -#define RBC 0x1000 /* Force Reload of BCOUNT */ -#define PS 0x2000 /* Pin Status */ -#define OI 0x4000 /* Overflow Interrupt Generated */ -#define BDI 0x8000 /* Block Done Interrupt Generated */ - -/* ******************************************* */ -/* MULTI BIT MACRO ENUMERATIONS */ -/* ******************************************* */ - - #endif /* _DEF_BF548_H */ diff --git a/arch/blackfin/mach-bf548/include/mach/defBF549.h b/arch/blackfin/mach-bf548/include/mach/defBF549.h index f7f0435..5a04e6d 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF549.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF549.h @@ -10,121 +10,13 @@ /* Include all Core registers and bit definitions */ #include <asm/def_LPBlackfin.h> - /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF549 */ /* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */ #include "defBF54x_base.h" -/* The following are the #defines needed by ADSP-BF549 that are not in the common header */ - -/* Timer Registers */ - -#define TIMER8_CONFIG 0xffc00600 /* Timer 8 Configuration Register */ -#define TIMER8_COUNTER 0xffc00604 /* Timer 8 Counter Register */ -#define TIMER8_PERIOD 0xffc00608 /* Timer 8 Period Register */ -#define TIMER8_WIDTH 0xffc0060c /* Timer 8 Width Register */ -#define TIMER9_CONFIG 0xffc00610 /* Timer 9 Configuration Register */ -#define TIMER9_COUNTER 0xffc00614 /* Timer 9 Counter Register */ -#define TIMER9_PERIOD 0xffc00618 /* Timer 9 Period Register */ -#define TIMER9_WIDTH 0xffc0061c /* Timer 9 Width Register */ -#define TIMER10_CONFIG 0xffc00620 /* Timer 10 Configuration Register */ -#define TIMER10_COUNTER 0xffc00624 /* Timer 10 Counter Register */ -#define TIMER10_PERIOD 0xffc00628 /* Timer 10 Period Register */ -#define TIMER10_WIDTH 0xffc0062c /* Timer 10 Width Register */ - -/* Timer Group of 3 Registers */ - -#define TIMER_ENABLE1 0xffc00640 /* Timer Group of 3 Enable Register */ -#define TIMER_DISABLE1 0xffc00644 /* Timer Group of 3 Disable Register */ -#define TIMER_STATUS1 0xffc00648 /* Timer Group of 3 Status Register */ - -/* SPORT0 Registers */ - -#define SPORT0_TCR1 0xffc00800 /* SPORT0 Transmit Configuration 1 Register */ -#define SPORT0_TCR2 0xffc00804 /* SPORT0 Transmit Configuration 2 Register */ -#define SPORT0_TCLKDIV 0xffc00808 /* SPORT0 Transmit Serial Clock Divider Register */ -#define SPORT0_TFSDIV 0xffc0080c /* SPORT0 Transmit Frame Sync Divider Register */ -#define SPORT0_TX 0xffc00810 /* SPORT0 Transmit Data Register */ -#define SPORT0_RX 0xffc00818 /* SPORT0 Receive Data Register */ -#define SPORT0_RCR1 0xffc00820 /* SPORT0 Receive Configuration 1 Register */ -#define SPORT0_RCR2 0xffc00824 /* SPORT0 Receive Configuration 2 Register */ -#define SPORT0_RCLKDIV 0xffc00828 /* SPORT0 Receive Serial Clock Divider Register */ -#define SPORT0_RFSDIV 0xffc0082c /* SPORT0 Receive Frame Sync Divider Register */ -#define SPORT0_STAT 0xffc00830 /* SPORT0 Status Register */ -#define SPORT0_CHNL 0xffc00834 /* SPORT0 Current Channel Register */ -#define SPORT0_MCMC1 0xffc00838 /* SPORT0 Multi channel Configuration Register 1 */ -#define SPORT0_MCMC2 0xffc0083c /* SPORT0 Multi channel Configuration Register 2 */ -#define SPORT0_MTCS0 0xffc00840 /* SPORT0 Multi channel Transmit Select Register 0 */ -#define SPORT0_MTCS1 0xffc00844 /* SPORT0 Multi channel Transmit Select Register 1 */ -#define SPORT0_MTCS2 0xffc00848 /* SPORT0 Multi channel Transmit Select Register 2 */ -#define SPORT0_MTCS3 0xffc0084c /* SPORT0 Multi channel Transmit Select Register 3 */ -#define SPORT0_MRCS0 0xffc00850 /* SPORT0 Multi channel Receive Select Register 0 */ -#define SPORT0_MRCS1 0xffc00854 /* SPORT0 Multi channel Receive Select Register 1 */ -#define SPORT0_MRCS2 0xffc00858 /* SPORT0 Multi channel Receive Select Register 2 */ -#define SPORT0_MRCS3 0xffc0085c /* SPORT0 Multi channel Receive Select Register 3 */ - -/* EPPI0 Registers */ - -#define EPPI0_STATUS 0xffc01000 /* EPPI0 Status Register */ -#define EPPI0_HCOUNT 0xffc01004 /* EPPI0 Horizontal Transfer Count Register */ -#define EPPI0_HDELAY 0xffc01008 /* EPPI0 Horizontal Delay Count Register */ -#define EPPI0_VCOUNT 0xffc0100c /* EPPI0 Vertical Transfer Count Register */ -#define EPPI0_VDELAY 0xffc01010 /* EPPI0 Vertical Delay Count Register */ -#define EPPI0_FRAME 0xffc01014 /* EPPI0 Lines per Frame Register */ -#define EPPI0_LINE 0xffc01018 /* EPPI0 Samples per Line Register */ -#define EPPI0_CLKDIV 0xffc0101c /* EPPI0 Clock Divide Register */ -#define EPPI0_CONTROL 0xffc01020 /* EPPI0 Control Register */ -#define EPPI0_FS1W_HBL 0xffc01024 /* EPPI0 FS1 Width Register / EPPI0 Horizontal Blanking Samples Per Line Register */ -#define EPPI0_FS1P_AVPL 0xffc01028 /* EPPI0 FS1 Period Register / EPPI0 Active Video Samples Per Line Register */ -#define EPPI0_FS2W_LVB 0xffc0102c /* EPPI0 FS2 Width Register / EPPI0 Lines of Vertical Blanking Register */ -#define EPPI0_FS2P_LAVF 0xffc01030 /* EPPI0 FS2 Period Register/ EPPI0 Lines of Active Video Per Field Register */ -#define EPPI0_CLIP 0xffc01034 /* EPPI0 Clipping Register */ - -/* UART2 Registers */ - -#define UART2_DLL 0xffc02100 /* Divisor Latch Low Byte */ -#define UART2_DLH 0xffc02104 /* Divisor Latch High Byte */ -#define UART2_GCTL 0xffc02108 /* Global Control Register */ -#define UART2_LCR 0xffc0210c /* Line Control Register */ -#define UART2_MCR 0xffc02110 /* Modem Control Register */ -#define UART2_LSR 0xffc02114 /* Line Status Register */ -#define UART2_MSR 0xffc02118 /* Modem Status Register */ -#define UART2_SCR 0xffc0211c /* Scratch Register */ -#define UART2_IER_SET 0xffc02120 /* Interrupt Enable Register Set */ -#define UART2_IER_CLEAR 0xffc02124 /* Interrupt Enable Register Clear */ -#define UART2_RBR 0xffc0212c /* Receive Buffer Register */ - -/* Two Wire Interface Registers (TWI1) */ - -#define TWI1_REGBASE 0xffc02200 -#define TWI1_CLKDIV 0xffc02200 /* Clock Divider Register */ -#define TWI1_CONTROL 0xffc02204 /* TWI Control Register */ -#define TWI1_SLAVE_CTRL 0xffc02208 /* TWI Slave Mode Control Register */ -#define TWI1_SLAVE_STAT 0xffc0220c /* TWI Slave Mode Status Register */ -#define TWI1_SLAVE_ADDR 0xffc02210 /* TWI Slave Mode Address Register */ -#define TWI1_MASTER_CTRL 0xffc02214 /* TWI Master Mode Control Register */ -#define TWI1_MASTER_STAT 0xffc02218 /* TWI Master Mode Status Register */ -#define TWI1_MASTER_ADDR 0xffc0221c /* TWI Master Mode Address Register */ -#define TWI1_INT_STAT 0xffc02220 /* TWI Interrupt Status Register */ -#define TWI1_INT_MASK 0xffc02224 /* TWI Interrupt Mask Register */ -#define TWI1_FIFO_CTRL 0xffc02228 /* TWI FIFO Control Register */ -#define TWI1_FIFO_STAT 0xffc0222c /* TWI FIFO Status Register */ -#define TWI1_XMT_DATA8 0xffc02280 /* TWI FIFO Transmit Data Single Byte Register */ -#define TWI1_XMT_DATA16 0xffc02284 /* TWI FIFO Transmit Data Double Byte Register */ -#define TWI1_RCV_DATA8 0xffc02288 /* TWI FIFO Receive Data Single Byte Register */ -#define TWI1_RCV_DATA16 0xffc0228c /* TWI FIFO Receive Data Double Byte Register */ - -/* SPI2 Registers */ - -#define SPI2_REGBASE 0xffc02400 -#define SPI2_CTL 0xffc02400 /* SPI2 Control Register */ -#define SPI2_FLG 0xffc02404 /* SPI2 Flag Register */ -#define SPI2_STAT 0xffc02408 /* SPI2 Status Register */ -#define SPI2_TDBR 0xffc0240c /* SPI2 Transmit Data Buffer Register */ -#define SPI2_RDBR 0xffc02410 /* SPI2 Receive Data Buffer Register */ -#define SPI2_BAUD 0xffc02414 /* SPI2 Baud Rate Register */ -#define SPI2_SHADOW 0xffc02418 /* SPI2 Receive Data Buffer Shadow Register */ +/* The BF549 is like the BF544, but has MXVR */ +#include "defBF547.h" /* MXVR Registers */ @@ -296,2418 +188,4 @@ #define MXVR_PIN_CTL 0xffc028dc /* MXVR Pin Control Register */ #define MXVR_SCLK_CNT 0xffc028e0 /* MXVR System Clock Counter Register */ -/* CAN Controller 1 Config 1 Registers */ - -#define CAN1_MC1 0xffc03200 /* CAN Controller 1 Mailbox Configuration Register 1 */ -#define CAN1_MD1 0xffc03204 /* CAN Controller 1 Mailbox Direction Register 1 */ -#define CAN1_TRS1 0xffc03208 /* CAN Controller 1 Transmit Request Set Register 1 */ -#define CAN1_TRR1 0xffc0320c /* CAN Controller 1 Transmit Request Reset Register 1 */ -#define CAN1_TA1 0xffc03210 /* CAN Controller 1 Transmit Acknowledge Register 1 */ -#define CAN1_AA1 0xffc03214 /* CAN Controller 1 Abort Acknowledge Register 1 */ -#define CAN1_RMP1 0xffc03218 /* CAN Controller 1 Receive Message Pending Register 1 */ -#define CAN1_RML1 0xffc0321c /* CAN Controller 1 Receive Message Lost Register 1 */ -#define CAN1_MBTIF1 0xffc03220 /* CAN Controller 1 Mailbox Transmit Interrupt Flag Register 1 */ -#define CAN1_MBRIF1 0xffc03224 /* CAN Controller 1 Mailbox Receive Interrupt Flag Register 1 */ -#define CAN1_MBIM1 0xffc03228 /* CAN Controller 1 Mailbox Interrupt Mask Register 1 */ -#define CAN1_RFH1 0xffc0322c /* CAN Controller 1 Remote Frame Handling Enable Register 1 */ -#define CAN1_OPSS1 0xffc03230 /* CAN Controller 1 Overwrite Protection Single Shot Transmit Register 1 */ - -/* CAN Controller 1 Config 2 Registers */ - -#define CAN1_MC2 0xffc03240 /* CAN Controller 1 Mailbox Configuration Register 2 */ -#define CAN1_MD2 0xffc03244 /* CAN Controller 1 Mailbox Direction Register 2 */ -#define CAN1_TRS2 0xffc03248 /* CAN Controller 1 Transmit Request Set Register 2 */ -#define CAN1_TRR2 0xffc0324c /* CAN Controller 1 Transmit Request Reset Register 2 */ -#define CAN1_TA2 0xffc03250 /* CAN Controller 1 Transmit Acknowledge Register 2 */ -#define CAN1_AA2 0xffc03254 /* CAN Controller 1 Abort Acknowledge Register 2 */ -#define CAN1_RMP2 0xffc03258 /* CAN Controller 1 Receive Message Pending Register 2 */ -#define CAN1_RML2 0xffc0325c /* CAN Controller 1 Receive Message Lost Register 2 */ -#define CAN1_MBTIF2 0xffc03260 /* CAN Controller 1 Mailbox Transmit Interrupt Flag Register 2 */ -#define CAN1_MBRIF2 0xffc03264 /* CAN Controller 1 Mailbox Receive Interrupt Flag Register 2 */ -#define CAN1_MBIM2 0xffc03268 /* CAN Controller 1 Mailbox Interrupt Mask Register 2 */ -#define CAN1_RFH2 0xffc0326c /* CAN Controller 1 Remote Frame Handling Enable Register 2 */ -#define CAN1_OPSS2 0xffc03270 /* CAN Controller 1 Overwrite Protection Single Shot Transmit Register 2 */ - -/* CAN Controller 1 Clock/Interrupt/Counter Registers */ - -#define CAN1_CLOCK 0xffc03280 /* CAN Controller 1 Clock Register */ -#define CAN1_TIMING 0xffc03284 /* CAN Controller 1 Timing Register */ -#define CAN1_DEBUG 0xffc03288 /* CAN Controller 1 Debug Register */ -#define CAN1_STATUS 0xffc0328c /* CAN Controller 1 Global Status Register */ -#define CAN1_CEC 0xffc03290 /* CAN Controller 1 Error Counter Register */ -#define CAN1_GIS 0xffc03294 /* CAN Controller 1 Global Interrupt Status Register */ -#define CAN1_GIM 0xffc03298 /* CAN Controller 1 Global Interrupt Mask Register */ -#define CAN1_GIF 0xffc0329c /* CAN Controller 1 Global Interrupt Flag Register */ -#define CAN1_CONTROL 0xffc032a0 /* CAN Controller 1 Master Control Register */ -#define CAN1_INTR 0xffc032a4 /* CAN Controller 1 Interrupt Pending Register */ -#define CAN1_MBTD 0xffc032ac /* CAN Controller 1 Mailbox Temporary Disable Register */ -#define CAN1_EWR 0xffc032b0 /* CAN Controller 1 Programmable Warning Level Register */ -#define CAN1_ESR 0xffc032b4 /* CAN Controller 1 Error Status Register */ -#define CAN1_UCCNT 0xffc032c4 /* CAN Controller 1 Universal Counter Register */ -#define CAN1_UCRC 0xffc032c8 /* CAN Controller 1 Universal Counter Force Reload Register */ -#define CAN1_UCCNF 0xffc032cc /* CAN Controller 1 Universal Counter Configuration Register */ - -/* CAN Controller 1 Mailbox Acceptance Registers */ - -#define CAN1_AM00L 0xffc03300 /* CAN Controller 1 Mailbox 0 Acceptance Mask High Register */ -#define CAN1_AM00H 0xffc03304 /* CAN Controller 1 Mailbox 0 Acceptance Mask Low Register */ -#define CAN1_AM01L 0xffc03308 /* CAN Controller 1 Mailbox 1 Acceptance Mask High Register */ -#define CAN1_AM01H 0xffc0330c /* CAN Controller 1 Mailbox 1 Acceptance Mask Low Register */ -#define CAN1_AM02L 0xffc03310 /* CAN Controller 1 Mailbox 2 Acceptance Mask High Register */ -#define CAN1_AM02H 0xffc03314 /* CAN Controller 1 Mailbox 2 Acceptance Mask Low Register */ -#define CAN1_AM03L 0xffc03318 /* CAN Controller 1 Mailbox 3 Acceptance Mask High Register */ -#define CAN1_AM03H 0xffc0331c /* CAN Controller 1 Mailbox 3 Acceptance Mask Low Register */ -#define CAN1_AM04L 0xffc03320 /* CAN Controller 1 Mailbox 4 Acceptance Mask High Register */ -#define CAN1_AM04H 0xffc03324 /* CAN Controller 1 Mailbox 4 Acceptance Mask Low Register */ -#define CAN1_AM05L 0xffc03328 /* CAN Controller 1 Mailbox 5 Acceptance Mask High Register */ -#define CAN1_AM05H 0xffc0332c /* CAN Controller 1 Mailbox 5 Acceptance Mask Low Register */ -#define CAN1_AM06L 0xffc03330 /* CAN Controller 1 Mailbox 6 Acceptance Mask High Register */ -#define CAN1_AM06H 0xffc03334 /* CAN Controller 1 Mailbox 6 Acceptance Mask Low Register */ -#define CAN1_AM07L 0xffc03338 /* CAN Controller 1 Mailbox 7 Acceptance Mask High Register */ -#define CAN1_AM07H 0xffc0333c /* CAN Controller 1 Mailbox 7 Acceptance Mask Low Register */ -#define CAN1_AM08L 0xffc03340 /* CAN Controller 1 Mailbox 8 Acceptance Mask High Register */ -#define CAN1_AM08H 0xffc03344 /* CAN Controller 1 Mailbox 8 Acceptance Mask Low Register */ -#define CAN1_AM09L 0xffc03348 /* CAN Controller 1 Mailbox 9 Acceptance Mask High Register */ -#define CAN1_AM09H 0xffc0334c /* CAN Controller 1 Mailbox 9 Acceptance Mask Low Register */ -#define CAN1_AM10L 0xffc03350 /* CAN Controller 1 Mailbox 10 Acceptance Mask High Register */ -#define CAN1_AM10H 0xffc03354 /* CAN Controller 1 Mailbox 10 Acceptance Mask Low Register */ -#define CAN1_AM11L 0xffc03358 /* CAN Controller 1 Mailbox 11 Acceptance Mask High Register */ -#define CAN1_AM11H 0xffc0335c /* CAN Controller 1 Mailbox 11 Acceptance Mask Low Register */ -#define CAN1_AM12L 0xffc03360 /* CAN Controller 1 Mailbox 12 Acceptance Mask High Register */ -#define CAN1_AM12H 0xffc03364 /* CAN Controller 1 Mailbox 12 Acceptance Mask Low Register */ -#define CAN1_AM13L 0xffc03368 /* CAN Controller 1 Mailbox 13 Acceptance Mask High Register */ -#define CAN1_AM13H 0xffc0336c /* CAN Controller 1 Mailbox 13 Acceptance Mask Low Register */ -#define CAN1_AM14L 0xffc03370 /* CAN Controller 1 Mailbox 14 Acceptance Mask High Register */ -#define CAN1_AM14H 0xffc03374 /* CAN Controller 1 Mailbox 14 Acceptance Mask Low Register */ -#define CAN1_AM15L 0xffc03378 /* CAN Controller 1 Mailbox 15 Acceptance Mask High Register */ -#define CAN1_AM15H 0xffc0337c /* CAN Controller 1 Mailbox 15 Acceptance Mask Low Register */ - -/* CAN Controller 1 Mailbox Acceptance Registers */ - -#define CAN1_AM16L 0xffc03380 /* CAN Controller 1 Mailbox 16 Acceptance Mask High Register */ -#define CAN1_AM16H 0xffc03384 /* CAN Controller 1 Mailbox 16 Acceptance Mask Low Register */ -#define CAN1_AM17L 0xffc03388 /* CAN Controller 1 Mailbox 17 Acceptance Mask High Register */ -#define CAN1_AM17H 0xffc0338c /* CAN Controller 1 Mailbox 17 Acceptance Mask Low Register */ -#define CAN1_AM18L 0xffc03390 /* CAN Controller 1 Mailbox 18 Acceptance Mask High Register */ -#define CAN1_AM18H 0xffc03394 /* CAN Controller 1 Mailbox 18 Acceptance Mask Low Register */ -#define CAN1_AM19L 0xffc03398 /* CAN Controller 1 Mailbox 19 Acceptance Mask High Register */ -#define CAN1_AM19H 0xffc0339c /* CAN Controller 1 Mailbox 19 Acceptance Mask Low Register */ -#define CAN1_AM20L 0xffc033a0 /* CAN Controller 1 Mailbox 20 Acceptance Mask High Register */ -#define CAN1_AM20H 0xffc033a4 /* CAN Controller 1 Mailbox 20 Acceptance Mask Low Register */ -#define CAN1_AM21L 0xffc033a8 /* CAN Controller 1 Mailbox 21 Acceptance Mask High Register */ -#define CAN1_AM21H 0xffc033ac /* CAN Controller 1 Mailbox 21 Acceptance Mask Low Register */ -#define CAN1_AM22L 0xffc033b0 /* CAN Controller 1 Mailbox 22 Acceptance Mask High Register */ -#define CAN1_AM22H 0xffc033b4 /* CAN Controller 1 Mailbox 22 Acceptance Mask Low Register */ -#define CAN1_AM23L 0xffc033b8 /* CAN Controller 1 Mailbox 23 Acceptance Mask High Register */ -#define CAN1_AM23H 0xffc033bc /* CAN Controller 1 Mailbox 23 Acceptance Mask Low Register */ -#define CAN1_AM24L 0xffc033c0 /* CAN Controller 1 Mailbox 24 Acceptance Mask High Register */ -#define CAN1_AM24H 0xffc033c4 /* CAN Controller 1 Mailbox 24 Acceptance Mask Low Register */ -#define CAN1_AM25L 0xffc033c8 /* CAN Controller 1 Mailbox 25 Acceptance Mask High Register */ -#define CAN1_AM25H 0xffc033cc /* CAN Controller 1 Mailbox 25 Acceptance Mask Low Register */ -#define CAN1_AM26L 0xffc033d0 /* CAN Controller 1 Mailbox 26 Acceptance Mask High Register */ -#define CAN1_AM26H 0xffc033d4 /* CAN Controller 1 Mailbox 26 Acceptance Mask Low Register */ -#define CAN1_AM27L 0xffc033d8 /* CAN Controller 1 Mailbox 27 Acceptance Mask High Register */ -#define CAN1_AM27H 0xffc033dc /* CAN Controller 1 Mailbox 27 Acceptance Mask Low Register */ -#define CAN1_AM28L 0xffc033e0 /* CAN Controller 1 Mailbox 28 Acceptance Mask High Register */ -#define CAN1_AM28H 0xffc033e4 /* CAN Controller 1 Mailbox 28 Acceptance Mask Low Register */ -#define CAN1_AM29L 0xffc033e8 /* CAN Controller 1 Mailbox 29 Acceptance Mask High Register */ -#define CAN1_AM29H 0xffc033ec /* CAN Controller 1 Mailbox 29 Acceptance Mask Low Register */ -#define CAN1_AM30L 0xffc033f0 /* CAN Controller 1 Mailbox 30 Acceptance Mask High Register */ -#define CAN1_AM30H 0xffc033f4 /* CAN Controller 1 Mailbox 30 Acceptance Mask Low Register */ -#define CAN1_AM31L 0xffc033f8 /* CAN Controller 1 Mailbox 31 Acceptance Mask High Register */ -#define CAN1_AM31H 0xffc033fc /* CAN Controller 1 Mailbox 31 Acceptance Mask Low Register */ - -/* CAN Controller 1 Mailbox Data Registers */ - -#define CAN1_MB00_DATA0 0xffc03400 /* CAN Controller 1 Mailbox 0 Data 0 Register */ -#define CAN1_MB00_DATA1 0xffc03404 /* CAN Controller 1 Mailbox 0 Data 1 Register */ -#define CAN1_MB00_DATA2 0xffc03408 /* CAN Controller 1 Mailbox 0 Data 2 Register */ -#define CAN1_MB00_DATA3 0xffc0340c /* CAN Controller 1 Mailbox 0 Data 3 Register */ -#define CAN1_MB00_LENGTH 0xffc03410 /* CAN Controller 1 Mailbox 0 Length Register */ -#define CAN1_MB00_TIMESTAMP 0xffc03414 /* CAN Controller 1 Mailbox 0 Timestamp Register */ -#define CAN1_MB00_ID0 0xffc03418 /* CAN Controller 1 Mailbox 0 ID0 Register */ -#define CAN1_MB00_ID1 0xffc0341c /* CAN Controller 1 Mailbox 0 ID1 Register */ -#define CAN1_MB01_DATA0 0xffc03420 /* CAN Controller 1 Mailbox 1 Data 0 Register */ -#define CAN1_MB01_DATA1 0xffc03424 /* CAN Controller 1 Mailbox 1 Data 1 Register */ -#define CAN1_MB01_DATA2 0xffc03428 /* CAN Controller 1 Mailbox 1 Data 2 Register */ -#define CAN1_MB01_DATA3 0xffc0342c /* CAN Controller 1 Mailbox 1 Data 3 Register */ -#define CAN1_MB01_LENGTH 0xffc03430 /* CAN Controller 1 Mailbox 1 Length Register */ -#define CAN1_MB01_TIMESTAMP 0xffc03434 /* CAN Controller 1 Mailbox 1 Timestamp Register */ -#define CAN1_MB01_ID0 0xffc03438 /* CAN Controller 1 Mailbox 1 ID0 Register */ -#define CAN1_MB01_ID1 0xffc0343c /* CAN Controller 1 Mailbox 1 ID1 Register */ -#define CAN1_MB02_DATA0 0xffc03440 /* CAN Controller 1 Mailbox 2 Data 0 Register */ -#define CAN1_MB02_DATA1 0xffc03444 /* CAN Controller 1 Mailbox 2 Data 1 Register */ -#define CAN1_MB02_DATA2 0xffc03448 /* CAN Controller 1 Mailbox 2 Data 2 Register */ -#define CAN1_MB02_DATA3 0xffc0344c /* CAN Controller 1 Mailbox 2 Data 3 Register */ -#define CAN1_MB02_LENGTH 0xffc03450 /* CAN Controller 1 Mailbox 2 Length Register */ -#define CAN1_MB02_TIMESTAMP 0xffc03454 /* CAN Controller 1 Mailbox 2 Timestamp Register */ -#define CAN1_MB02_ID0 0xffc03458 /* CAN Controller 1 Mailbox 2 ID0 Register */ -#define CAN1_MB02_ID1 0xffc0345c /* CAN Controller 1 Mailbox 2 ID1 Register */ -#define CAN1_MB03_DATA0 0xffc03460 /* CAN Controller 1 Mailbox 3 Data 0 Register */ -#define CAN1_MB03_DATA1 0xffc03464 /* CAN Controller 1 Mailbox 3 Data 1 Register */ -#define CAN1_MB03_DATA2 0xffc03468 /* CAN Controller 1 Mailbox 3 Data 2 Register */ -#define CAN1_MB03_DATA3 0xffc0346c /* CAN Controller 1 Mailbox 3 Data 3 Register */ -#define CAN1_MB03_LENGTH 0xffc03470 /* CAN Controller 1 Mailbox 3 Length Register */ -#define CAN1_MB03_TIMESTAMP 0xffc03474 /* CAN Controller 1 Mailbox 3 Timestamp Register */ -#define CAN1_MB03_ID0 0xffc03478 /* CAN Controller 1 Mailbox 3 ID0 Register */ -#define CAN1_MB03_ID1 0xffc0347c /* CAN Controller 1 Mailbox 3 ID1 Register */ -#define CAN1_MB04_DATA0 0xffc03480 /* CAN Controller 1 Mailbox 4 Data 0 Register */ -#define CAN1_MB04_DATA1 0xffc03484 /* CAN Controller 1 Mailbox 4 Data 1 Register */ -#define CAN1_MB04_DATA2 0xffc03488 /* CAN Controller 1 Mailbox 4 Data 2 Register */ -#define CAN1_MB04_DATA3 0xffc0348c /* CAN Controller 1 Mailbox 4 Data 3 Register */ -#define CAN1_MB04_LENGTH 0xffc03490 /* CAN Controller 1 Mailbox 4 Length Register */ -#define CAN1_MB04_TIMESTAMP 0xffc03494 /* CAN Controller 1 Mailbox 4 Timestamp Register */ -#define CAN1_MB04_ID0 0xffc03498 /* CAN Controller 1 Mailbox 4 ID0 Register */ -#define CAN1_MB04_ID1 0xffc0349c /* CAN Controller 1 Mailbox 4 ID1 Register */ -#define CAN1_MB05_DATA0 0xffc034a0 /* CAN Controller 1 Mailbox 5 Data 0 Register */ -#define CAN1_MB05_DATA1 0xffc034a4 /* CAN Controller 1 Mailbox 5 Data 1 Register */ -#define CAN1_MB05_DATA2 0xffc034a8 /* CAN Controller 1 Mailbox 5 Data 2 Register */ -#define CAN1_MB05_DATA3 0xffc034ac /* CAN Controller 1 Mailbox 5 Data 3 Register */ -#define CAN1_MB05_LENGTH 0xffc034b0 /* CAN Controller 1 Mailbox 5 Length Register */ -#define CAN1_MB05_TIMESTAMP 0xffc034b4 /* CAN Controller 1 Mailbox 5 Timestamp Register */ -#define CAN1_MB05_ID0 0xffc034b8 /* CAN Controller 1 Mailbox 5 ID0 Register */ -#define CAN1_MB05_ID1 0xffc034bc /* CAN Controller 1 Mailbox 5 ID1 Register */ -#define CAN1_MB06_DATA0 0xffc034c0 /* CAN Controller 1 Mailbox 6 Data 0 Register */ -#define CAN1_MB06_DATA1 0xffc034c4 /* CAN Controller 1 Mailbox 6 Data 1 Register */ -#define CAN1_MB06_DATA2 0xffc034c8 /* CAN Controller 1 Mailbox 6 Data 2 Register */ -#define CAN1_MB06_DATA3 0xffc034cc /* CAN Controller 1 Mailbox 6 Data 3 Register */ -#define CAN1_MB06_LENGTH 0xffc034d0 /* CAN Controller 1 Mailbox 6 Length Register */ -#define CAN1_MB06_TIMESTAMP 0xffc034d4 /* CAN Controller 1 Mailbox 6 Timestamp Register */ -#define CAN1_MB06_ID0 0xffc034d8 /* CAN Controller 1 Mailbox 6 ID0 Register */ -#define CAN1_MB06_ID1 0xffc034dc /* CAN Controller 1 Mailbox 6 ID1 Register */ -#define CAN1_MB07_DATA0 0xffc034e0 /* CAN Controller 1 Mailbox 7 Data 0 Register */ -#define CAN1_MB07_DATA1 0xffc034e4 /* CAN Controller 1 Mailbox 7 Data 1 Register */ -#define CAN1_MB07_DATA2 0xffc034e8 /* CAN Controller 1 Mailbox 7 Data 2 Register */ -#define CAN1_MB07_DATA3 0xffc034ec /* CAN Controller 1 Mailbox 7 Data 3 Register */ -#define CAN1_MB07_LENGTH 0xffc034f0 /* CAN Controller 1 Mailbox 7 Length Register */ -#define CAN1_MB07_TIMESTAMP 0xffc034f4 /* CAN Controller 1 Mailbox 7 Timestamp Register */ -#define CAN1_MB07_ID0 0xffc034f8 /* CAN Controller 1 Mailbox 7 ID0 Register */ -#define CAN1_MB07_ID1 0xffc034fc /* CAN Controller 1 Mailbox 7 ID1 Register */ -#define CAN1_MB08_DATA0 0xffc03500 /* CAN Controller 1 Mailbox 8 Data 0 Register */ -#define CAN1_MB08_DATA1 0xffc03504 /* CAN Controller 1 Mailbox 8 Data 1 Register */ -#define CAN1_MB08_DATA2 0xffc03508 /* CAN Controller 1 Mailbox 8 Data 2 Register */ -#define CAN1_MB08_DATA3 0xffc0350c /* CAN Controller 1 Mailbox 8 Data 3 Register */ -#define CAN1_MB08_LENGTH 0xffc03510 /* CAN Controller 1 Mailbox 8 Length Register */ -#define CAN1_MB08_TIMESTAMP 0xffc03514 /* CAN Controller 1 Mailbox 8 Timestamp Register */ -#define CAN1_MB08_ID0 0xffc03518 /* CAN Controller 1 Mailbox 8 ID0 Register */ -#define CAN1_MB08_ID1 0xffc0351c /* CAN Controller 1 Mailbox 8 ID1 Register */ -#define CAN1_MB09_DATA0 0xffc03520 /* CAN Controller 1 Mailbox 9 Data 0 Register */ -#define CAN1_MB09_DATA1 0xffc03524 /* CAN Controller 1 Mailbox 9 Data 1 Register */ -#define CAN1_MB09_DATA2 0xffc03528 /* CAN Controller 1 Mailbox 9 Data 2 Register */ -#define CAN1_MB09_DATA3 0xffc0352c /* CAN Controller 1 Mailbox 9 Data 3 Register */ -#define CAN1_MB09_LENGTH 0xffc03530 /* CAN Controller 1 Mailbox 9 Length Register */ -#define CAN1_MB09_TIMESTAMP 0xffc03534 /* CAN Controller 1 Mailbox 9 Timestamp Register */ -#define CAN1_MB09_ID0 0xffc03538 /* CAN Controller 1 Mailbox 9 ID0 Register */ -#define CAN1_MB09_ID1 0xffc0353c /* CAN Controller 1 Mailbox 9 ID1 Register */ -#define CAN1_MB10_DATA0 0xffc03540 /* CAN Controller 1 Mailbox 10 Data 0 Register */ -#define CAN1_MB10_DATA1 0xffc03544 /* CAN Controller 1 Mailbox 10 Data 1 Register */ -#define CAN1_MB10_DATA2 0xffc03548 /* CAN Controller 1 Mailbox 10 Data 2 Register */ -#define CAN1_MB10_DATA3 0xffc0354c /* CAN Controller 1 Mailbox 10 Data 3 Register */ -#define CAN1_MB10_LENGTH 0xffc03550 /* CAN Controller 1 Mailbox 10 Length Register */ -#define CAN1_MB10_TIMESTAMP 0xffc03554 /* CAN Controller 1 Mailbox 10 Timestamp Register */ -#define CAN1_MB10_ID0 0xffc03558 /* CAN Controller 1 Mailbox 10 ID0 Register */ -#define CAN1_MB10_ID1 0xffc0355c /* CAN Controller 1 Mailbox 10 ID1 Register */ -#define CAN1_MB11_DATA0 0xffc03560 /* CAN Controller 1 Mailbox 11 Data 0 Register */ -#define CAN1_MB11_DATA1 0xffc03564 /* CAN Controller 1 Mailbox 11 Data 1 Register */ -#define CAN1_MB11_DATA2 0xffc03568 /* CAN Controller 1 Mailbox 11 Data 2 Register */ -#define CAN1_MB11_DATA3 0xffc0356c /* CAN Controller 1 Mailbox 11 Data 3 Register */ -#define CAN1_MB11_LENGTH 0xffc03570 /* CAN Controller 1 Mailbox 11 Length Register */ -#define CAN1_MB11_TIMESTAMP 0xffc03574 /* CAN Controller 1 Mailbox 11 Timestamp Register */ -#define CAN1_MB11_ID0 0xffc03578 /* CAN Controller 1 Mailbox 11 ID0 Register */ -#define CAN1_MB11_ID1 0xffc0357c /* CAN Controller 1 Mailbox 11 ID1 Register */ -#define CAN1_MB12_DATA0 0xffc03580 /* CAN Controller 1 Mailbox 12 Data 0 Register */ -#define CAN1_MB12_DATA1 0xffc03584 /* CAN Controller 1 Mailbox 12 Data 1 Register */ -#define CAN1_MB12_DATA2 0xffc03588 /* CAN Controller 1 Mailbox 12 Data 2 Register */ -#define CAN1_MB12_DATA3 0xffc0358c /* CAN Controller 1 Mailbox 12 Data 3 Register */ -#define CAN1_MB12_LENGTH 0xffc03590 /* CAN Controller 1 Mailbox 12 Length Register */ -#define CAN1_MB12_TIMESTAMP 0xffc03594 /* CAN Controller 1 Mailbox 12 Timestamp Register */ -#define CAN1_MB12_ID0 0xffc03598 /* CAN Controller 1 Mailbox 12 ID0 Register */ -#define CAN1_MB12_ID1 0xffc0359c /* CAN Controller 1 Mailbox 12 ID1 Register */ -#define CAN1_MB13_DATA0 0xffc035a0 /* CAN Controller 1 Mailbox 13 Data 0 Register */ -#define CAN1_MB13_DATA1 0xffc035a4 /* CAN Controller 1 Mailbox 13 Data 1 Register */ -#define CAN1_MB13_DATA2 0xffc035a8 /* CAN Controller 1 Mailbox 13 Data 2 Register */ -#define CAN1_MB13_DATA3 0xffc035ac /* CAN Controller 1 Mailbox 13 Data 3 Register */ -#define CAN1_MB13_LENGTH 0xffc035b0 /* CAN Controller 1 Mailbox 13 Length Register */ -#define CAN1_MB13_TIMESTAMP 0xffc035b4 /* CAN Controller 1 Mailbox 13 Timestamp Register */ -#define CAN1_MB13_ID0 0xffc035b8 /* CAN Controller 1 Mailbox 13 ID0 Register */ -#define CAN1_MB13_ID1 0xffc035bc /* CAN Controller 1 Mailbox 13 ID1 Register */ -#define CAN1_MB14_DATA0 0xffc035c0 /* CAN Controller 1 Mailbox 14 Data 0 Register */ -#define CAN1_MB14_DATA1 0xffc035c4 /* CAN Controller 1 Mailbox 14 Data 1 Register */ -#define CAN1_MB14_DATA2 0xffc035c8 /* CAN Controller 1 Mailbox 14 Data 2 Register */ -#define CAN1_MB14_DATA3 0xffc035cc /* CAN Controller 1 Mailbox 14 Data 3 Register */ -#define CAN1_MB14_LENGTH 0xffc035d0 /* CAN Controller 1 Mailbox 14 Length Register */ -#define CAN1_MB14_TIMESTAMP 0xffc035d4 /* CAN Controller 1 Mailbox 14 Timestamp Register */ -#define CAN1_MB14_ID0 0xffc035d8 /* CAN Controller 1 Mailbox 14 ID0 Register */ -#define CAN1_MB14_ID1 0xffc035dc /* CAN Controller 1 Mailbox 14 ID1 Register */ -#define CAN1_MB15_DATA0 0xffc035e0 /* CAN Controller 1 Mailbox 15 Data 0 Register */ -#define CAN1_MB15_DATA1 0xffc035e4 /* CAN Controller 1 Mailbox 15 Data 1 Register */ -#define CAN1_MB15_DATA2 0xffc035e8 /* CAN Controller 1 Mailbox 15 Data 2 Register */ -#define CAN1_MB15_DATA3 0xffc035ec /* CAN Controller 1 Mailbox 15 Data 3 Register */ -#define CAN1_MB15_LENGTH 0xffc035f0 /* CAN Controller 1 Mailbox 15 Length Register */ -#define CAN1_MB15_TIMESTAMP 0xffc035f4 /* CAN Controller 1 Mailbox 15 Timestamp Register */ -#define CAN1_MB15_ID0 0xffc035f8 /* CAN Controller 1 Mailbox 15 ID0 Register */ -#define CAN1_MB15_ID1 0xffc035fc /* CAN Controller 1 Mailbox 15 ID1 Register */ - -/* CAN Controller 1 Mailbox Data Registers */ - -#define CAN1_MB16_DATA0 0xffc03600 /* CAN Controller 1 Mailbox 16 Data 0 Register */ -#define CAN1_MB16_DATA1 0xffc03604 /* CAN Controller 1 Mailbox 16 Data 1 Register */ -#define CAN1_MB16_DATA2 0xffc03608 /* CAN Controller 1 Mailbox 16 Data 2 Register */ -#define CAN1_MB16_DATA3 0xffc0360c /* CAN Controller 1 Mailbox 16 Data 3 Register */ -#define CAN1_MB16_LENGTH 0xffc03610 /* CAN Controller 1 Mailbox 16 Length Register */ -#define CAN1_MB16_TIMESTAMP 0xffc03614 /* CAN Controller 1 Mailbox 16 Timestamp Register */ -#define CAN1_MB16_ID0 0xffc03618 /* CAN Controller 1 Mailbox 16 ID0 Register */ -#define CAN1_MB16_ID1 0xffc0361c /* CAN Controller 1 Mailbox 16 ID1 Register */ -#define CAN1_MB17_DATA0 0xffc03620 /* CAN Controller 1 Mailbox 17 Data 0 Register */ -#define CAN1_MB17_DATA1 0xffc03624 /* CAN Controller 1 Mailbox 17 Data 1 Register */ -#define CAN1_MB17_DATA2 0xffc03628 /* CAN Controller 1 Mailbox 17 Data 2 Register */ -#define CAN1_MB17_DATA3 0xffc0362c /* CAN Controller 1 Mailbox 17 Data 3 Register */ -#define CAN1_MB17_LENGTH 0xffc03630 /* CAN Controller 1 Mailbox 17 Length Register */ -#define CAN1_MB17_TIMESTAMP 0xffc03634 /* CAN Controller 1 Mailbox 17 Timestamp Register */ -#define CAN1_MB17_ID0 0xffc03638 /* CAN Controller 1 Mailbox 17 ID0 Register */ -#define CAN1_MB17_ID1 0xffc0363c /* CAN Controller 1 Mailbox 17 ID1 Register */ -#define CAN1_MB18_DATA0 0xffc03640 /* CAN Controller 1 Mailbox 18 Data 0 Register */ -#define CAN1_MB18_DATA1 0xffc03644 /* CAN Controller 1 Mailbox 18 Data 1 Register */ -#define CAN1_MB18_DATA2 0xffc03648 /* CAN Controller 1 Mailbox 18 Data 2 Register */ -#define CAN1_MB18_DATA3 0xffc0364c /* CAN Controller 1 Mailbox 18 Data 3 Register */ -#define CAN1_MB18_LENGTH 0xffc03650 /* CAN Controller 1 Mailbox 18 Length Register */ -#define CAN1_MB18_TIMESTAMP 0xffc03654 /* CAN Controller 1 Mailbox 18 Timestamp Register */ -#define CAN1_MB18_ID0 0xffc03658 /* CAN Controller 1 Mailbox 18 ID0 Register */ -#define CAN1_MB18_ID1 0xffc0365c /* CAN Controller 1 Mailbox 18 ID1 Register */ -#define CAN1_MB19_DATA0 0xffc03660 /* CAN Controller 1 Mailbox 19 Data 0 Register */ -#define CAN1_MB19_DATA1 0xffc03664 /* CAN Controller 1 Mailbox 19 Data 1 Register */ -#define CAN1_MB19_DATA2 0xffc03668 /* CAN Controller 1 Mailbox 19 Data 2 Register */ -#define CAN1_MB19_DATA3 0xffc0366c /* CAN Controller 1 Mailbox 19 Data 3 Register */ -#define CAN1_MB19_LENGTH 0xffc03670 /* CAN Controller 1 Mailbox 19 Length Register */ -#define CAN1_MB19_TIMESTAMP 0xffc03674 /* CAN Controller 1 Mailbox 19 Timestamp Register */ -#define CAN1_MB19_ID0 0xffc03678 /* CAN Controller 1 Mailbox 19 ID0 Register */ -#define CAN1_MB19_ID1 0xffc0367c /* CAN Controller 1 Mailbox 19 ID1 Register */ -#define CAN1_MB20_DATA0 0xffc03680 /* CAN Controller 1 Mailbox 20 Data 0 Register */ -#define CAN1_MB20_DATA1 0xffc03684 /* CAN Controller 1 Mailbox 20 Data 1 Register */ -#define CAN1_MB20_DATA2 0xffc03688 /* CAN Controller 1 Mailbox 20 Data 2 Register */ -#define CAN1_MB20_DATA3 0xffc0368c /* CAN Controller 1 Mailbox 20 Data 3 Register */ -#define CAN1_MB20_LENGTH 0xffc03690 /* CAN Controller 1 Mailbox 20 Length Register */ -#define CAN1_MB20_TIMESTAMP 0xffc03694 /* CAN Controller 1 Mailbox 20 Timestamp Register */ -#define CAN1_MB20_ID0 0xffc03698 /* CAN Controller 1 Mailbox 20 ID0 Register */ -#define CAN1_MB20_ID1 0xffc0369c /* CAN Controller 1 Mailbox 20 ID1 Register */ -#define CAN1_MB21_DATA0 0xffc036a0 /* CAN Controller 1 Mailbox 21 Data 0 Register */ -#define CAN1_MB21_DATA1 0xffc036a4 /* CAN Controller 1 Mailbox 21 Data 1 Register */ -#define CAN1_MB21_DATA2 0xffc036a8 /* CAN Controller 1 Mailbox 21 Data 2 Register */ -#define CAN1_MB21_DATA3 0xffc036ac /* CAN Controller 1 Mailbox 21 Data 3 Register */ -#define CAN1_MB21_LENGTH 0xffc036b0 /* CAN Controller 1 Mailbox 21 Length Register */ -#define CAN1_MB21_TIMESTAMP 0xffc036b4 /* CAN Controller 1 Mailbox 21 Timestamp Register */ -#define CAN1_MB21_ID0 0xffc036b8 /* CAN Controller 1 Mailbox 21 ID0 Register */ -#define CAN1_MB21_ID1 0xffc036bc /* CAN Controller 1 Mailbox 21 ID1 Register */ -#define CAN1_MB22_DATA0 0xffc036c0 /* CAN Controller 1 Mailbox 22 Data 0 Register */ -#define CAN1_MB22_DATA1 0xffc036c4 /* CAN Controller 1 Mailbox 22 Data 1 Register */ -#define CAN1_MB22_DATA2 0xffc036c8 /* CAN Controller 1 Mailbox 22 Data 2 Register */ -#define CAN1_MB22_DATA3 0xffc036cc /* CAN Controller 1 Mailbox 22 Data 3 Register */ -#define CAN1_MB22_LENGTH 0xffc036d0 /* CAN Controller 1 Mailbox 22 Length Register */ -#define CAN1_MB22_TIMESTAMP 0xffc036d4 /* CAN Controller 1 Mailbox 22 Timestamp Register */ -#define CAN1_MB22_ID0 0xffc036d8 /* CAN Controller 1 Mailbox 22 ID0 Register */ -#define CAN1_MB22_ID1 0xffc036dc /* CAN Controller 1 Mailbox 22 ID1 Register */ -#define CAN1_MB23_DATA0 0xffc036e0 /* CAN Controller 1 Mailbox 23 Data 0 Register */ -#define CAN1_MB23_DATA1 0xffc036e4 /* CAN Controller 1 Mailbox 23 Data 1 Register */ -#define CAN1_MB23_DATA2 0xffc036e8 /* CAN Controller 1 Mailbox 23 Data 2 Register */ -#define CAN1_MB23_DATA3 0xffc036ec /* CAN Controller 1 Mailbox 23 Data 3 Register */ -#define CAN1_MB23_LENGTH 0xffc036f0 /* CAN Controller 1 Mailbox 23 Length Register */ -#define CAN1_MB23_TIMESTAMP 0xffc036f4 /* CAN Controller 1 Mailbox 23 Timestamp Register */ -#define CAN1_MB23_ID0 0xffc036f8 /* CAN Controller 1 Mailbox 23 ID0 Register */ -#define CAN1_MB23_ID1 0xffc036fc /* CAN Controller 1 Mailbox 23 ID1 Register */ -#define CAN1_MB24_DATA0 0xffc03700 /* CAN Controller 1 Mailbox 24 Data 0 Register */ -#define CAN1_MB24_DATA1 0xffc03704 /* CAN Controller 1 Mailbox 24 Data 1 Register */ -#define CAN1_MB24_DATA2 0xffc03708 /* CAN Controller 1 Mailbox 24 Data 2 Register */ -#define CAN1_MB24_DATA3 0xffc0370c /* CAN Controller 1 Mailbox 24 Data 3 Register */ -#define CAN1_MB24_LENGTH 0xffc03710 /* CAN Controller 1 Mailbox 24 Length Register */ -#define CAN1_MB24_TIMESTAMP 0xffc03714 /* CAN Controller 1 Mailbox 24 Timestamp Register */ -#define CAN1_MB24_ID0 0xffc03718 /* CAN Controller 1 Mailbox 24 ID0 Register */ -#define CAN1_MB24_ID1 0xffc0371c /* CAN Controller 1 Mailbox 24 ID1 Register */ -#define CAN1_MB25_DATA0 0xffc03720 /* CAN Controller 1 Mailbox 25 Data 0 Register */ -#define CAN1_MB25_DATA1 0xffc03724 /* CAN Controller 1 Mailbox 25 Data 1 Register */ -#define CAN1_MB25_DATA2 0xffc03728 /* CAN Controller 1 Mailbox 25 Data 2 Register */ -#define CAN1_MB25_DATA3 0xffc0372c /* CAN Controller 1 Mailbox 25 Data 3 Register */ -#define CAN1_MB25_LENGTH 0xffc03730 /* CAN Controller 1 Mailbox 25 Length Register */ -#define CAN1_MB25_TIMESTAMP 0xffc03734 /* CAN Controller 1 Mailbox 25 Timestamp Register */ -#define CAN1_MB25_ID0 0xffc03738 /* CAN Controller 1 Mailbox 25 ID0 Register */ -#define CAN1_MB25_ID1 0xffc0373c /* CAN Controller 1 Mailbox 25 ID1 Register */ -#define CAN1_MB26_DATA0 0xffc03740 /* CAN Controller 1 Mailbox 26 Data 0 Register */ -#define CAN1_MB26_DATA1 0xffc03744 /* CAN Controller 1 Mailbox 26 Data 1 Register */ -#define CAN1_MB26_DATA2 0xffc03748 /* CAN Controller 1 Mailbox 26 Data 2 Register */ -#define CAN1_MB26_DATA3 0xffc0374c /* CAN Controller 1 Mailbox 26 Data 3 Register */ -#define CAN1_MB26_LENGTH 0xffc03750 /* CAN Controller 1 Mailbox 26 Length Register */ -#define CAN1_MB26_TIMESTAMP 0xffc03754 /* CAN Controller 1 Mailbox 26 Timestamp Register */ -#define CAN1_MB26_ID0 0xffc03758 /* CAN Controller 1 Mailbox 26 ID0 Register */ -#define CAN1_MB26_ID1 0xffc0375c /* CAN Controller 1 Mailbox 26 ID1 Register */ -#define CAN1_MB27_DATA0 0xffc03760 /* CAN Controller 1 Mailbox 27 Data 0 Register */ -#define CAN1_MB27_DATA1 0xffc03764 /* CAN Controller 1 Mailbox 27 Data 1 Register */ -#define CAN1_MB27_DATA2 0xffc03768 /* CAN Controller 1 Mailbox 27 Data 2 Register */ -#define CAN1_MB27_DATA3 0xffc0376c /* CAN Controller 1 Mailbox 27 Data 3 Register */ -#define CAN1_MB27_LENGTH 0xffc03770 /* CAN Controller 1 Mailbox 27 Length Register */ -#define CAN1_MB27_TIMESTAMP 0xffc03774 /* CAN Controller 1 Mailbox 27 Timestamp Register */ -#define CAN1_MB27_ID0 0xffc03778 /* CAN Controller 1 Mailbox 27 ID0 Register */ -#define CAN1_MB27_ID1 0xffc0377c /* CAN Controller 1 Mailbox 27 ID1 Register */ -#define CAN1_MB28_DATA0 0xffc03780 /* CAN Controller 1 Mailbox 28 Data 0 Register */ -#define CAN1_MB28_DATA1 0xffc03784 /* CAN Controller 1 Mailbox 28 Data 1 Register */ -#define CAN1_MB28_DATA2 0xffc03788 /* CAN Controller 1 Mailbox 28 Data 2 Register */ -#define CAN1_MB28_DATA3 0xffc0378c /* CAN Controller 1 Mailbox 28 Data 3 Register */ -#define CAN1_MB28_LENGTH 0xffc03790 /* CAN Controller 1 Mailbox 28 Length Register */ -#define CAN1_MB28_TIMESTAMP 0xffc03794 /* CAN Controller 1 Mailbox 28 Timestamp Register */ -#define CAN1_MB28_ID0 0xffc03798 /* CAN Controller 1 Mailbox 28 ID0 Register */ -#define CAN1_MB28_ID1 0xffc0379c /* CAN Controller 1 Mailbox 28 ID1 Register */ -#define CAN1_MB29_DATA0 0xffc037a0 /* CAN Controller 1 Mailbox 29 Data 0 Register */ -#define CAN1_MB29_DATA1 0xffc037a4 /* CAN Controller 1 Mailbox 29 Data 1 Register */ -#define CAN1_MB29_DATA2 0xffc037a8 /* CAN Controller 1 Mailbox 29 Data 2 Register */ -#define CAN1_MB29_DATA3 0xffc037ac /* CAN Controller 1 Mailbox 29 Data 3 Register */ -#define CAN1_MB29_LENGTH 0xffc037b0 /* CAN Controller 1 Mailbox 29 Length Register */ -#define CAN1_MB29_TIMESTAMP 0xffc037b4 /* CAN Controller 1 Mailbox 29 Timestamp Register */ -#define CAN1_MB29_ID0 0xffc037b8 /* CAN Controller 1 Mailbox 29 ID0 Register */ -#define CAN1_MB29_ID1 0xffc037bc /* CAN Controller 1 Mailbox 29 ID1 Register */ -#define CAN1_MB30_DATA0 0xffc037c0 /* CAN Controller 1 Mailbox 30 Data 0 Register */ -#define CAN1_MB30_DATA1 0xffc037c4 /* CAN Controller 1 Mailbox 30 Data 1 Register */ -#define CAN1_MB30_DATA2 0xffc037c8 /* CAN Controller 1 Mailbox 30 Data 2 Register */ -#define CAN1_MB30_DATA3 0xffc037cc /* CAN Controller 1 Mailbox 30 Data 3 Register */ -#define CAN1_MB30_LENGTH 0xffc037d0 /* CAN Controller 1 Mailbox 30 Length Register */ -#define CAN1_MB30_TIMESTAMP 0xffc037d4 /* CAN Controller 1 Mailbox 30 Timestamp Register */ -#define CAN1_MB30_ID0 0xffc037d8 /* CAN Controller 1 Mailbox 30 ID0 Register */ -#define CAN1_MB30_ID1 0xffc037dc /* CAN Controller 1 Mailbox 30 ID1 Register */ -#define CAN1_MB31_DATA0 0xffc037e0 /* CAN Controller 1 Mailbox 31 Data 0 Register */ -#define CAN1_MB31_DATA1 0xffc037e4 /* CAN Controller 1 Mailbox 31 Data 1 Register */ -#define CAN1_MB31_DATA2 0xffc037e8 /* CAN Controller 1 Mailbox 31 Data 2 Register */ -#define CAN1_MB31_DATA3 0xffc037ec /* CAN Controller 1 Mailbox 31 Data 3 Register */ -#define CAN1_MB31_LENGTH 0xffc037f0 /* CAN Controller 1 Mailbox 31 Length Register */ -#define CAN1_MB31_TIMESTAMP 0xffc037f4 /* CAN Controller 1 Mailbox 31 Timestamp Register */ -#define CAN1_MB31_ID0 0xffc037f8 /* CAN Controller 1 Mailbox 31 ID0 Register */ -#define CAN1_MB31_ID1 0xffc037fc /* CAN Controller 1 Mailbox 31 ID1 Register */ - -/* ATAPI Registers */ - -#define ATAPI_CONTROL 0xffc03800 /* ATAPI Control Register */ -#define ATAPI_STATUS 0xffc03804 /* ATAPI Status Register */ -#define ATAPI_DEV_ADDR 0xffc03808 /* ATAPI Device Register Address */ -#define ATAPI_DEV_TXBUF 0xffc0380c /* ATAPI Device Register Write Data */ -#define ATAPI_DEV_RXBUF 0xffc03810 /* ATAPI Device Register Read Data */ -#define ATAPI_INT_MASK 0xffc03814 /* ATAPI Interrupt Mask Register */ -#define ATAPI_INT_STATUS 0xffc03818 /* ATAPI Interrupt Status Register */ -#define ATAPI_XFER_LEN 0xffc0381c /* ATAPI Length of Transfer */ -#define ATAPI_LINE_STATUS 0xffc03820 /* ATAPI Line Status */ -#define ATAPI_SM_STATE 0xffc03824 /* ATAPI State Machine Status */ -#define ATAPI_TERMINATE 0xffc03828 /* ATAPI Host Terminate */ -#define ATAPI_PIO_TFRCNT 0xffc0382c /* ATAPI PIO mode transfer count */ -#define ATAPI_DMA_TFRCNT 0xffc03830 /* ATAPI DMA mode transfer count */ -#define ATAPI_UMAIN_TFRCNT 0xffc03834 /* ATAPI UDMAIN transfer count */ -#define ATAPI_UDMAOUT_TFRCNT 0xffc03838 /* ATAPI UDMAOUT transfer count */ -#define ATAPI_REG_TIM_0 0xffc03840 /* ATAPI Register Transfer Timing 0 */ -#define ATAPI_PIO_TIM_0 0xffc03844 /* ATAPI PIO Timing 0 Register */ -#define ATAPI_PIO_TIM_1 0xffc03848 /* ATAPI PIO Timing 1 Register */ -#define ATAPI_MULTI_TIM_0 0xffc03850 /* ATAPI Multi-DMA Timing 0 Register */ -#define ATAPI_MULTI_TIM_1 0xffc03854 /* ATAPI Multi-DMA Timing 1 Register */ -#define ATAPI_MULTI_TIM_2 0xffc03858 /* ATAPI Multi-DMA Timing 2 Register */ -#define ATAPI_ULTRA_TIM_0 0xffc03860 /* ATAPI Ultra-DMA Timing 0 Register */ -#define ATAPI_ULTRA_TIM_1 0xffc03864 /* ATAPI Ultra-DMA Timing 1 Register */ -#define ATAPI_ULTRA_TIM_2 0xffc03868 /* ATAPI Ultra-DMA Timing 2 Register */ -#define ATAPI_ULTRA_TIM_3 0xffc0386c /* ATAPI Ultra-DMA Timing 3 Register */ - -/* SDH Registers */ - -#define SDH_PWR_CTL 0xffc03900 /* SDH Power Control */ -#define SDH_CLK_CTL 0xffc03904 /* SDH Clock Control */ -#define SDH_ARGUMENT 0xffc03908 /* SDH Argument */ -#define SDH_COMMAND 0xffc0390c /* SDH Command */ -#define SDH_RESP_CMD 0xffc03910 /* SDH Response Command */ -#define SDH_RESPONSE0 0xffc03914 /* SDH Response0 */ -#define SDH_RESPONSE1 0xffc03918 /* SDH Response1 */ -#define SDH_RESPONSE2 0xffc0391c /* SDH Response2 */ -#define SDH_RESPONSE3 0xffc03920 /* SDH Response3 */ -#define SDH_DATA_TIMER 0xffc03924 /* SDH Data Timer */ -#define SDH_DATA_LGTH 0xffc03928 /* SDH Data Length */ -#define SDH_DATA_CTL 0xffc0392c /* SDH Data Control */ -#define SDH_DATA_CNT 0xffc03930 /* SDH Data Counter */ -#define SDH_STATUS 0xffc03934 /* SDH Status */ -#define SDH_STATUS_CLR 0xffc03938 /* SDH Status Clear */ -#define SDH_MASK0 0xffc0393c /* SDH Interrupt0 Mask */ -#define SDH_MASK1 0xffc03940 /* SDH Interrupt1 Mask */ -#define SDH_FIFO_CNT 0xffc03948 /* SDH FIFO Counter */ -#define SDH_FIFO 0xffc03980 /* SDH Data FIFO */ -#define SDH_E_STATUS 0xffc039c0 /* SDH Exception Status */ -#define SDH_E_MASK 0xffc039c4 /* SDH Exception Mask */ -#define SDH_CFG 0xffc039c8 /* SDH Configuration */ -#define SDH_RD_WAIT_EN 0xffc039cc /* SDH Read Wait Enable */ -#define SDH_PID0 0xffc039d0 /* SDH Peripheral Identification0 */ -#define SDH_PID1 0xffc039d4 /* SDH Peripheral Identification1 */ -#define SDH_PID2 0xffc039d8 /* SDH Peripheral Identification2 */ -#define SDH_PID3 0xffc039dc /* SDH Peripheral Identification3 */ -#define SDH_PID4 0xffc039e0 /* SDH Peripheral Identification4 */ -#define SDH_PID5 0xffc039e4 /* SDH Peripheral Identification5 */ -#define SDH_PID6 0xffc039e8 /* SDH Peripheral Identification6 */ -#define SDH_PID7 0xffc039ec /* SDH Peripheral Identification7 */ - -/* HOST Port Registers */ - -#define HOST_CONTROL 0xffc03a00 /* HOST Control Register */ -#define HOST_STATUS 0xffc03a04 /* HOST Status Register */ -#define HOST_TIMEOUT 0xffc03a08 /* HOST Acknowledge Mode Timeout Register */ - -/* USB Control Registers */ - -#define USB_FADDR 0xffc03c00 /* Function address register */ -#define USB_POWER 0xffc03c04 /* Power management register */ -#define USB_INTRTX 0xffc03c08 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */ -#define USB_INTRRX 0xffc03c0c /* Interrupt register for Rx endpoints 1 to 7 */ -#define USB_INTRTXE 0xffc03c10 /* Interrupt enable register for IntrTx */ -#define USB_INTRRXE 0xffc03c14 /* Interrupt enable register for IntrRx */ -#define USB_INTRUSB 0xffc03c18 /* Interrupt register for common USB interrupts */ -#define USB_INTRUSBE 0xffc03c1c /* Interrupt enable register for IntrUSB */ -#define USB_FRAME 0xffc03c20 /* USB frame number */ -#define USB_INDEX 0xffc03c24 /* Index register for selecting the indexed endpoint registers */ -#define USB_TESTMODE 0xffc03c28 /* Enabled USB 20 test modes */ -#define USB_GLOBINTR 0xffc03c2c /* Global Interrupt Mask register and Wakeup Exception Interrupt */ -#define USB_GLOBAL_CTL 0xffc03c30 /* Global Clock Control for the core */ - -/* USB Packet Control Registers */ - -#define USB_TX_MAX_PACKET 0xffc03c40 /* Maximum packet size for Host Tx endpoint */ -#define USB_CSR0 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ -#define USB_TXCSR 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ -#define USB_RX_MAX_PACKET 0xffc03c48 /* Maximum packet size for Host Rx endpoint */ -#define USB_RXCSR 0xffc03c4c /* Control Status register for Host Rx endpoint */ -#define USB_COUNT0 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ -#define USB_RXCOUNT 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ -#define USB_TXTYPE 0xffc03c54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */ -#define USB_NAKLIMIT0 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ -#define USB_TXINTERVAL 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ -#define USB_RXTYPE 0xffc03c5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */ -#define USB_RXINTERVAL 0xffc03c60 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */ -#define USB_TXCOUNT 0xffc03c68 /* Number of bytes to be written to the selected endpoint Tx FIFO */ - -/* USB Endpoint FIFO Registers */ - -#define USB_EP0_FIFO 0xffc03c80 /* Endpoint 0 FIFO */ -#define USB_EP1_FIFO 0xffc03c88 /* Endpoint 1 FIFO */ -#define USB_EP2_FIFO 0xffc03c90 /* Endpoint 2 FIFO */ -#define USB_EP3_FIFO 0xffc03c98 /* Endpoint 3 FIFO */ -#define USB_EP4_FIFO 0xffc03ca0 /* Endpoint 4 FIFO */ -#define USB_EP5_FIFO 0xffc03ca8 /* Endpoint 5 FIFO */ -#define USB_EP6_FIFO 0xffc03cb0 /* Endpoint 6 FIFO */ -#define USB_EP7_FIFO 0xffc03cb8 /* Endpoint 7 FIFO */ - -/* USB OTG Control Registers */ - -#define USB_OTG_DEV_CTL 0xffc03d00 /* OTG Device Control Register */ -#define USB_OTG_VBUS_IRQ 0xffc03d04 /* OTG VBUS Control Interrupts */ -#define USB_OTG_VBUS_MASK 0xffc03d08 /* VBUS Control Interrupt Enable */ - -/* USB Phy Control Registers */ - -#define USB_LINKINFO 0xffc03d48 /* Enables programming of some PHY-side delays */ -#define USB_VPLEN 0xffc03d4c /* Determines duration of VBUS pulse for VBUS charging */ -#define USB_HS_EOF1 0xffc03d50 /* Time buffer for High-Speed transactions */ -#define USB_FS_EOF1 0xffc03d54 /* Time buffer for Full-Speed transactions */ -#define USB_LS_EOF1 0xffc03d58 /* Time buffer for Low-Speed transactions */ - -/* (APHY_CNTRL is for ADI usage only) */ - -#define USB_APHY_CNTRL 0xffc03de0 /* Register that increases visibility of Analog PHY */ - -/* (APHY_CALIB is for ADI usage only) */ - -#define USB_APHY_CALIB 0xffc03de4 /* Register used to set some calibration values */ -#define USB_APHY_CNTRL2 0xffc03de8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */ - -/* (PHY_TEST is for ADI usage only) */ - -#define USB_PHY_TEST 0xffc03dec /* Used for reducing simulation time and simplifies FIFO testability */ -#define USB_PLLOSC_CTRL 0xffc03df0 /* Used to program different parameters for USB PLL and Oscillator */ -#define USB_SRP_CLKDIV 0xffc03df4 /* Used to program clock divide value for the clock fed to the SRP detection logic */ - -/* USB Endpoint 0 Control Registers */ - -#define USB_EP_NI0_TXMAXP 0xffc03e00 /* Maximum packet size for Host Tx endpoint0 */ -#define USB_EP_NI0_TXCSR 0xffc03e04 /* Control Status register for endpoint 0 */ -#define USB_EP_NI0_RXMAXP 0xffc03e08 /* Maximum packet size for Host Rx endpoint0 */ -#define USB_EP_NI0_RXCSR 0xffc03e0c /* Control Status register for Host Rx endpoint0 */ -#define USB_EP_NI0_RXCOUNT 0xffc03e10 /* Number of bytes received in endpoint 0 FIFO */ -#define USB_EP_NI0_TXTYPE 0xffc03e14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */ -#define USB_EP_NI0_TXINTERVAL 0xffc03e18 /* Sets the NAK response timeout on Endpoint 0 */ -#define USB_EP_NI0_RXTYPE 0xffc03e1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */ -#define USB_EP_NI0_RXINTERVAL 0xffc03e20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */ - -/* USB Endpoint 1 Control Registers */ - -#define USB_EP_NI0_TXCOUNT 0xffc03e28 /* Number of bytes to be written to the endpoint0 Tx FIFO */ -#define USB_EP_NI1_TXMAXP 0xffc03e40 /* Maximum packet size for Host Tx endpoint1 */ -#define USB_EP_NI1_TXCSR 0xffc03e44 /* Control Status register for endpoint1 */ -#define USB_EP_NI1_RXMAXP 0xffc03e48 /* Maximum packet size for Host Rx endpoint1 */ -#define USB_EP_NI1_RXCSR 0xffc03e4c /* Control Status register for Host Rx endpoint1 */ -#define USB_EP_NI1_RXCOUNT 0xffc03e50 /* Number of bytes received in endpoint1 FIFO */ -#define USB_EP_NI1_TXTYPE 0xffc03e54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */ -#define USB_EP_NI1_TXINTERVAL 0xffc03e58 /* Sets the NAK response timeout on Endpoint1 */ -#define USB_EP_NI1_RXTYPE 0xffc03e5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */ -#define USB_EP_NI1_RXINTERVAL 0xffc03e60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */ - -/* USB Endpoint 2 Control Registers */ - -#define USB_EP_NI1_TXCOUNT 0xffc03e68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */ -#define USB_EP_NI2_TXMAXP 0xffc03e80 /* Maximum packet size for Host Tx endpoint2 */ -#define USB_EP_NI2_TXCSR 0xffc03e84 /* Control Status register for endpoint2 */ -#define USB_EP_NI2_RXMAXP 0xffc03e88 /* Maximum packet size for Host Rx endpoint2 */ -#define USB_EP_NI2_RXCSR 0xffc03e8c /* Control Status register for Host Rx endpoint2 */ -#define USB_EP_NI2_RXCOUNT 0xffc03e90 /* Number of bytes received in endpoint2 FIFO */ -#define USB_EP_NI2_TXTYPE 0xffc03e94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */ -#define USB_EP_NI2_TXINTERVAL 0xffc03e98 /* Sets the NAK response timeout on Endpoint2 */ -#define USB_EP_NI2_RXTYPE 0xffc03e9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */ -#define USB_EP_NI2_RXINTERVAL 0xffc03ea0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */ - -/* USB Endpoint 3 Control Registers */ - -#define USB_EP_NI2_TXCOUNT 0xffc03ea8 /* Number of bytes to be written to the endpoint2 Tx FIFO */ -#define USB_EP_NI3_TXMAXP 0xffc03ec0 /* Maximum packet size for Host Tx endpoint3 */ -#define USB_EP_NI3_TXCSR 0xffc03ec4 /* Control Status register for endpoint3 */ -#define USB_EP_NI3_RXMAXP 0xffc03ec8 /* Maximum packet size for Host Rx endpoint3 */ -#define USB_EP_NI3_RXCSR 0xffc03ecc /* Control Status register for Host Rx endpoint3 */ -#define USB_EP_NI3_RXCOUNT 0xffc03ed0 /* Number of bytes received in endpoint3 FIFO */ -#define USB_EP_NI3_TXTYPE 0xffc03ed4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */ -#define USB_EP_NI3_TXINTERVAL 0xffc03ed8 /* Sets the NAK response timeout on Endpoint3 */ -#define USB_EP_NI3_RXTYPE 0xffc03edc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */ -#define USB_EP_NI3_RXINTERVAL 0xffc03ee0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */ - -/* USB Endpoint 4 Control Registers */ - -#define USB_EP_NI3_TXCOUNT 0xffc03ee8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */ -#define USB_EP_NI4_TXMAXP 0xffc03f00 /* Maximum packet size for Host Tx endpoint4 */ -#define USB_EP_NI4_TXCSR 0xffc03f04 /* Control Status register for endpoint4 */ -#define USB_EP_NI4_RXMAXP 0xffc03f08 /* Maximum packet size for Host Rx endpoint4 */ -#define USB_EP_NI4_RXCSR 0xffc03f0c /* Control Status register for Host Rx endpoint4 */ -#define USB_EP_NI4_RXCOUNT 0xffc03f10 /* Number of bytes received in endpoint4 FIFO */ -#define USB_EP_NI4_TXTYPE 0xffc03f14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */ -#define USB_EP_NI4_TXINTERVAL 0xffc03f18 /* Sets the NAK response timeout on Endpoint4 */ -#define USB_EP_NI4_RXTYPE 0xffc03f1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */ -#define USB_EP_NI4_RXINTERVAL 0xffc03f20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */ - -/* USB Endpoint 5 Control Registers */ - -#define USB_EP_NI4_TXCOUNT 0xffc03f28 /* Number of bytes to be written to the endpoint4 Tx FIFO */ -#define USB_EP_NI5_TXMAXP 0xffc03f40 /* Maximum packet size for Host Tx endpoint5 */ -#define USB_EP_NI5_TXCSR 0xffc03f44 /* Control Status register for endpoint5 */ -#define USB_EP_NI5_RXMAXP 0xffc03f48 /* Maximum packet size for Host Rx endpoint5 */ -#define USB_EP_NI5_RXCSR 0xffc03f4c /* Control Status register for Host Rx endpoint5 */ -#define USB_EP_NI5_RXCOUNT 0xffc03f50 /* Number of bytes received in endpoint5 FIFO */ -#define USB_EP_NI5_TXTYPE 0xffc03f54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */ -#define USB_EP_NI5_TXINTERVAL 0xffc03f58 /* Sets the NAK response timeout on Endpoint5 */ -#define USB_EP_NI5_RXTYPE 0xffc03f5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */ -#define USB_EP_NI5_RXINTERVAL 0xffc03f60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */ - -/* USB Endpoint 6 Control Registers */ - -#define USB_EP_NI5_TXCOUNT 0xffc03f68 /* Number of bytes to be written to the H145endpoint5 Tx FIFO */ -#define USB_EP_NI6_TXMAXP 0xffc03f80 /* Maximum packet size for Host Tx endpoint6 */ -#define USB_EP_NI6_TXCSR 0xffc03f84 /* Control Status register for endpoint6 */ -#define USB_EP_NI6_RXMAXP 0xffc03f88 /* Maximum packet size for Host Rx endpoint6 */ -#define USB_EP_NI6_RXCSR 0xffc03f8c /* Control Status register for Host Rx endpoint6 */ -#define USB_EP_NI6_RXCOUNT 0xffc03f90 /* Number of bytes received in endpoint6 FIFO */ -#define USB_EP_NI6_TXTYPE 0xffc03f94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */ -#define USB_EP_NI6_TXINTERVAL 0xffc03f98 /* Sets the NAK response timeout on Endpoint6 */ -#define USB_EP_NI6_RXTYPE 0xffc03f9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */ -#define USB_EP_NI6_RXINTERVAL 0xffc03fa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */ - -/* USB Endpoint 7 Control Registers */ - -#define USB_EP_NI6_TXCOUNT 0xffc03fa8 /* Number of bytes to be written to the endpoint6 Tx FIFO */ -#define USB_EP_NI7_TXMAXP 0xffc03fc0 /* Maximum packet size for Host Tx endpoint7 */ -#define USB_EP_NI7_TXCSR 0xffc03fc4 /* Control Status register for endpoint7 */ -#define USB_EP_NI7_RXMAXP 0xffc03fc8 /* Maximum packet size for Host Rx endpoint7 */ -#define USB_EP_NI7_RXCSR 0xffc03fcc /* Control Status register for Host Rx endpoint7 */ -#define USB_EP_NI7_RXCOUNT 0xffc03fd0 /* Number of bytes received in endpoint7 FIFO */ -#define USB_EP_NI7_TXTYPE 0xffc03fd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */ -#define USB_EP_NI7_TXINTERVAL 0xffc03fd8 /* Sets the NAK response timeout on Endpoint7 */ -#define USB_EP_NI7_RXTYPE 0xffc03fdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */ -#define USB_EP_NI7_RXINTERVAL 0xffc03ff0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */ -#define USB_EP_NI7_TXCOUNT 0xffc03ff8 /* Number of bytes to be written to the endpoint7 Tx FIFO */ -#define USB_DMA_INTERRUPT 0xffc04000 /* Indicates pending interrupts for the DMA channels */ - -/* USB Channel 0 Config Registers */ - -#define USB_DMA0CONTROL 0xffc04004 /* DMA master channel 0 configuration */ -#define USB_DMA0ADDRLOW 0xffc04008 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */ -#define USB_DMA0ADDRHIGH 0xffc0400c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */ -#define USB_DMA0COUNTLOW 0xffc04010 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */ -#define USB_DMA0COUNTHIGH 0xffc04014 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */ - -/* USB Channel 1 Config Registers */ - -#define USB_DMA1CONTROL 0xffc04024 /* DMA master channel 1 configuration */ -#define USB_DMA1ADDRLOW 0xffc04028 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */ -#define USB_DMA1ADDRHIGH 0xffc0402c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */ -#define USB_DMA1COUNTLOW 0xffc04030 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */ -#define USB_DMA1COUNTHIGH 0xffc04034 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */ - -/* USB Channel 2 Config Registers */ - -#define USB_DMA2CONTROL 0xffc04044 /* DMA master channel 2 configuration */ -#define USB_DMA2ADDRLOW 0xffc04048 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */ -#define USB_DMA2ADDRHIGH 0xffc0404c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */ -#define USB_DMA2COUNTLOW 0xffc04050 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */ -#define USB_DMA2COUNTHIGH 0xffc04054 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */ - -/* USB Channel 3 Config Registers */ - -#define USB_DMA3CONTROL 0xffc04064 /* DMA master channel 3 configuration */ -#define USB_DMA3ADDRLOW 0xffc04068 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */ -#define USB_DMA3ADDRHIGH 0xffc0406c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */ -#define USB_DMA3COUNTLOW 0xffc04070 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */ -#define USB_DMA3COUNTHIGH 0xffc04074 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */ - -/* USB Channel 4 Config Registers */ - -#define USB_DMA4CONTROL 0xffc04084 /* DMA master channel 4 configuration */ -#define USB_DMA4ADDRLOW 0xffc04088 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */ -#define USB_DMA4ADDRHIGH 0xffc0408c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */ -#define USB_DMA4COUNTLOW 0xffc04090 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */ -#define USB_DMA4COUNTHIGH 0xffc04094 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */ - -/* USB Channel 5 Config Registers */ - -#define USB_DMA5CONTROL 0xffc040a4 /* DMA master channel 5 configuration */ -#define USB_DMA5ADDRLOW 0xffc040a8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */ -#define USB_DMA5ADDRHIGH 0xffc040ac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */ -#define USB_DMA5COUNTLOW 0xffc040b0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */ -#define USB_DMA5COUNTHIGH 0xffc040b4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */ - -/* USB Channel 6 Config Registers */ - -#define USB_DMA6CONTROL 0xffc040c4 /* DMA master channel 6 configuration */ -#define USB_DMA6ADDRLOW 0xffc040c8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */ -#define USB_DMA6ADDRHIGH 0xffc040cc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */ -#define USB_DMA6COUNTLOW 0xffc040d0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */ -#define USB_DMA6COUNTHIGH 0xffc040d4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */ - -/* USB Channel 7 Config Registers */ - -#define USB_DMA7CONTROL 0xffc040e4 /* DMA master channel 7 configuration */ -#define USB_DMA7ADDRLOW 0xffc040e8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */ -#define USB_DMA7ADDRHIGH 0xffc040ec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */ -#define USB_DMA7COUNTLOW 0xffc040f0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */ -#define USB_DMA7COUNTHIGH 0xffc040f4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */ - -/* Keypad Registers */ - -#define KPAD_CTL 0xffc04100 /* Controls keypad module enable and disable */ -#define KPAD_PRESCALE 0xffc04104 /* Establish a time base for programing the KPAD_MSEL register */ -#define KPAD_MSEL 0xffc04108 /* Selects delay parameters for keypad interface sensitivity */ -#define KPAD_ROWCOL 0xffc0410c /* Captures the row and column output values of the keys pressed */ -#define KPAD_STAT 0xffc04110 /* Holds and clears the status of the keypad interface interrupt */ -#define KPAD_SOFTEVAL 0xffc04114 /* Lets software force keypad interface to check for keys being pressed */ - -/* Pixel Compositor (PIXC) Registers */ - -#define PIXC_CTL 0xffc04400 /* Overlay enable, resampling mode, I/O data format, transparency enable, watermark level, FIFO status */ -#define PIXC_PPL 0xffc04404 /* Holds the number of pixels per line of the display */ -#define PIXC_LPF 0xffc04408 /* Holds the number of lines per frame of the display */ -#define PIXC_AHSTART 0xffc0440c /* Contains horizontal start pixel information of the overlay data (set A) */ -#define PIXC_AHEND 0xffc04410 /* Contains horizontal end pixel information of the overlay data (set A) */ -#define PIXC_AVSTART 0xffc04414 /* Contains vertical start pixel information of the overlay data (set A) */ -#define PIXC_AVEND 0xffc04418 /* Contains vertical end pixel information of the overlay data (set A) */ -#define PIXC_ATRANSP 0xffc0441c /* Contains the transparency ratio (set A) */ -#define PIXC_BHSTART 0xffc04420 /* Contains horizontal start pixel information of the overlay data (set B) */ -#define PIXC_BHEND 0xffc04424 /* Contains horizontal end pixel information of the overlay data (set B) */ -#define PIXC_BVSTART 0xffc04428 /* Contains vertical start pixel information of the overlay data (set B) */ -#define PIXC_BVEND 0xffc0442c /* Contains vertical end pixel information of the overlay data (set B) */ -#define PIXC_BTRANSP 0xffc04430 /* Contains the transparency ratio (set B) */ -#define PIXC_INTRSTAT 0xffc0443c /* Overlay interrupt configuration/status */ -#define PIXC_RYCON 0xffc04440 /* Color space conversion matrix register. Contains the R/Y conversion coefficients */ -#define PIXC_GUCON 0xffc04444 /* Color space conversion matrix register. Contains the G/U conversion coefficients */ -#define PIXC_BVCON 0xffc04448 /* Color space conversion matrix register. Contains the B/V conversion coefficients */ -#define PIXC_CCBIAS 0xffc0444c /* Bias values for the color space conversion matrix */ -#define PIXC_TC 0xffc04450 /* Holds the transparent color value */ - -/* Handshake MDMA 0 Registers */ - -#define HMDMA0_CONTROL 0xffc04500 /* Handshake MDMA0 Control Register */ -#define HMDMA0_ECINIT 0xffc04504 /* Handshake MDMA0 Initial Edge Count Register */ -#define HMDMA0_BCINIT 0xffc04508 /* Handshake MDMA0 Initial Block Count Register */ -#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshold Register */ -#define HMDMA0_ECOVERFLOW 0xffc04510 /* Handshake MDMA0 Edge Count Overflow Interrupt Register */ -#define HMDMA0_ECOUNT 0xffc04514 /* Handshake MDMA0 Current Edge Count Register */ -#define HMDMA0_BCOUNT 0xffc04518 /* Handshake MDMA0 Current Block Count Register */ - -/* Handshake MDMA 1 Registers */ - -#define HMDMA1_CONTROL 0xffc04540 /* Handshake MDMA1 Control Register */ -#define HMDMA1_ECINIT 0xffc04544 /* Handshake MDMA1 Initial Edge Count Register */ -#define HMDMA1_BCINIT 0xffc04548 /* Handshake MDMA1 Initial Block Count Register */ -#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshold Register */ -#define HMDMA1_ECOVERFLOW 0xffc04550 /* Handshake MDMA1 Edge Count Overflow Interrupt Register */ -#define HMDMA1_ECOUNT 0xffc04554 /* Handshake MDMA1 Current Edge Count Register */ -#define HMDMA1_BCOUNT 0xffc04558 /* Handshake MDMA1 Current Block Count Register */ - - -/* ********************************************************** */ -/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */ -/* and MULTI BIT READ MACROS */ -/* ********************************************************** */ - -/* Bit masks for PIXC_CTL */ - -#define PIXC_EN 0x1 /* Pixel Compositor Enable */ -#define OVR_A_EN 0x2 /* Overlay A Enable */ -#define OVR_B_EN 0x4 /* Overlay B Enable */ -#define IMG_FORM 0x8 /* Image Data Format */ -#define OVR_FORM 0x10 /* Overlay Data Format */ -#define OUT_FORM 0x20 /* Output Data Format */ -#define UDS_MOD 0x40 /* Resampling Mode */ -#define TC_EN 0x80 /* Transparent Color Enable */ -#define IMG_STAT 0x300 /* Image FIFO Status */ -#define OVR_STAT 0xc00 /* Overlay FIFO Status */ -#define WM_LVL 0x3000 /* FIFO Watermark Level */ - -/* Bit masks for PIXC_AHSTART */ - -#define A_HSTART 0xfff /* Horizontal Start Coordinates */ - -/* Bit masks for PIXC_AHEND */ - -#define A_HEND 0xfff /* Horizontal End Coordinates */ - -/* Bit masks for PIXC_AVSTART */ - -#define A_VSTART 0x3ff /* Vertical Start Coordinates */ - -/* Bit masks for PIXC_AVEND */ - -#define A_VEND 0x3ff /* Vertical End Coordinates */ - -/* Bit masks for PIXC_ATRANSP */ - -#define A_TRANSP 0xf /* Transparency Value */ - -/* Bit masks for PIXC_BHSTART */ - -#define B_HSTART 0xfff /* Horizontal Start Coordinates */ - -/* Bit masks for PIXC_BHEND */ - -#define B_HEND 0xfff /* Horizontal End Coordinates */ - -/* Bit masks for PIXC_BVSTART */ - -#define B_VSTART 0x3ff /* Vertical Start Coordinates */ - -/* Bit masks for PIXC_BVEND */ - -#define B_VEND 0x3ff /* Vertical End Coordinates */ - -/* Bit masks for PIXC_BTRANSP */ - -#define B_TRANSP 0xf /* Transparency Value */ - -/* Bit masks for PIXC_INTRSTAT */ - -#define OVR_INT_EN 0x1 /* Interrupt at End of Last Valid Overlay */ -#define FRM_INT_EN 0x2 /* Interrupt at End of Frame */ -#define OVR_INT_STAT 0x4 /* Overlay Interrupt Status */ -#define FRM_INT_STAT 0x8 /* Frame Interrupt Status */ - -/* Bit masks for PIXC_RYCON */ - -#define A11 0x3ff /* A11 in the Coefficient Matrix */ -#define A12 0xffc00 /* A12 in the Coefficient Matrix */ -#define A13 0x3ff00000 /* A13 in the Coefficient Matrix */ -#define RY_MULT4 0x40000000 /* Multiply Row by 4 */ - -/* Bit masks for PIXC_GUCON */ - -#define A21 0x3ff /* A21 in the Coefficient Matrix */ -#define A22 0xffc00 /* A22 in the Coefficient Matrix */ -#define A23 0x3ff00000 /* A23 in the Coefficient Matrix */ -#define GU_MULT4 0x40000000 /* Multiply Row by 4 */ - -/* Bit masks for PIXC_BVCON */ - -#define A31 0x3ff /* A31 in the Coefficient Matrix */ -#define A32 0xffc00 /* A32 in the Coefficient Matrix */ -#define A33 0x3ff00000 /* A33 in the Coefficient Matrix */ -#define BV_MULT4 0x40000000 /* Multiply Row by 4 */ - -/* Bit masks for PIXC_CCBIAS */ - -#define A14 0x3ff /* A14 in the Bias Vector */ -#define A24 0xffc00 /* A24 in the Bias Vector */ -#define A34 0x3ff00000 /* A34 in the Bias Vector */ - -/* Bit masks for PIXC_TC */ - -#define RY_TRANS 0xff /* Transparent Color - R/Y Component */ -#define GU_TRANS 0xff00 /* Transparent Color - G/U Component */ -#define BV_TRANS 0xff0000 /* Transparent Color - B/V Component */ - -/* Bit masks for HOST_CONTROL */ - -#define HOST_EN 0x1 /* Host Enable */ -#define HOST_END 0x2 /* Host Endianess */ -#define DATA_SIZE 0x4 /* Data Size */ -#define HOST_RST 0x8 /* Host Reset */ -#define HRDY_OVR 0x20 /* Host Ready Override */ -#define INT_MODE 0x40 /* Interrupt Mode */ -#define BT_EN 0x80 /* Bus Timeout Enable */ -#define EHW 0x100 /* Enable Host Write */ -#define EHR 0x200 /* Enable Host Read */ -#define BDR 0x400 /* Burst DMA Requests */ - -/* Bit masks for HOST_STATUS */ - -#define DMA_READY 0x1 /* DMA Ready */ -#define FIFOFULL 0x2 /* FIFO Full */ -#define FIFOEMPTY 0x4 /* FIFO Empty */ -#define DMA_COMPLETE 0x8 /* DMA Complete */ -#define HSHK 0x10 /* Host Handshake */ -#define TIMEOUT 0x20 /* Host Timeout */ -#define HIRQ 0x40 /* Host Interrupt Request */ -#define ALLOW_CNFG 0x80 /* Allow New Configuration */ -#define DMA_DIR 0x100 /* DMA Direction */ -#define BTE 0x200 /* Bus Timeout Enabled */ - -/* Bit masks for HOST_TIMEOUT */ - -#define COUNT_TIMEOUT 0x7ff /* Host Timeout count */ - -/* Bit masks for MXVR_CONFIG */ - -#define MXVREN 0x1 /* MXVR Enable */ -#define MMSM 0x2 /* MXVR Master/Slave Mode Select */ -#define ACTIVE 0x4 /* Active Mode */ -#define SDELAY 0x8 /* Synchronous Data Delay */ -#define NCMRXEN 0x10 /* Normal Control Message Receive Enable */ -#define RWRRXEN 0x20 /* Remote Write Receive Enable */ -#define MTXEN 0x40 /* MXVR Transmit Data Enable */ -#define MTXONB 0x80 /* MXVR Phy Transmitter On */ -#define EPARITY 0x100 /* Even Parity Select */ -#define MSB 0x1e00 /* Master Synchronous Boundary */ -#define APRXEN 0x2000 /* Asynchronous Packet Receive Enable */ -#define WAKEUP 0x4000 /* Wake-Up */ -#define LMECH 0x8000 /* Lock Mechanism Select */ - -/* Bit masks for MXVR_STATE_0 */ - -#define NACT 0x1 /* Network Activity */ -#define SBLOCK 0x2 /* Super Block Lock */ -#define FMPLLST 0xc /* Frequency Multiply PLL SM State */ -#define CDRPLLST 0xe0 /* Clock/Data Recovery PLL SM State */ -#define APBSY 0x100 /* Asynchronous Packet Transmit Buffer Busy */ -#define APARB 0x200 /* Asynchronous Packet Arbitrating */ -#define APTX 0x400 /* Asynchronous Packet Transmitting */ -#define APRX 0x800 /* Receiving Asynchronous Packet */ -#define CMBSY 0x1000 /* Control Message Transmit Buffer Busy */ -#define CMARB 0x2000 /* Control Message Arbitrating */ -#define CMTX 0x4000 /* Control Message Transmitting */ -#define CMRX 0x8000 /* Receiving Control Message */ -#define MRXONB 0x10000 /* MRXONB Pin State */ -#define RGSIP 0x20000 /* Remote Get Source In Progress */ -#define DALIP 0x40000 /* Resource Deallocate In Progress */ -#define ALIP 0x80000 /* Resource Allocate In Progress */ -#define RRDIP 0x100000 /* Remote Read In Progress */ -#define RWRIP 0x200000 /* Remote Write In Progress */ -#define FLOCK 0x400000 /* Frame Lock */ -#define BLOCK 0x800000 /* Block Lock */ -#define RSB 0xf000000 /* Received Synchronous Boundary */ -#define DERRNUM 0xf0000000 /* DMA Error Channel Number */ - -/* Bit masks for MXVR_STATE_1 */ - -#define SRXNUMB 0xf /* Synchronous Receive FIFO Number of Bytes */ -#define STXNUMB 0xf0 /* Synchronous Transmit FIFO Number of Bytes */ -#define APCONT 0x100 /* Asynchronous Packet Continuation */ -#define OBERRNUM 0xe00 /* DMA Out of Bounds Error Channel Number */ -#define DMAACTIVE0 0x10000 /* DMA0 Active */ -#define DMAACTIVE1 0x20000 /* DMA1 Active */ -#define DMAACTIVE2 0x40000 /* DMA2 Active */ -#define DMAACTIVE3 0x80000 /* DMA3 Active */ -#define DMAACTIVE4 0x100000 /* DMA4 Active */ -#define DMAACTIVE5 0x200000 /* DMA5 Active */ -#define DMAACTIVE6 0x400000 /* DMA6 Active */ -#define DMAACTIVE7 0x800000 /* DMA7 Active */ -#define DMAPMEN0 0x1000000 /* DMA0 Pattern Matching Enabled */ -#define DMAPMEN1 0x2000000 /* DMA1 Pattern Matching Enabled */ -#define DMAPMEN2 0x4000000 /* DMA2 Pattern Matching Enabled */ -#define DMAPMEN3 0x8000000 /* DMA3 Pattern Matching Enabled */ -#define DMAPMEN4 0x10000000 /* DMA4 Pattern Matching Enabled */ -#define DMAPMEN5 0x20000000 /* DMA5 Pattern Matching Enabled */ -#define DMAPMEN6 0x40000000 /* DMA6 Pattern Matching Enabled */ -#define DMAPMEN7 0x80000000 /* DMA7 Pattern Matching Enabled */ - -/* Bit masks for MXVR_INT_STAT_0 */ - -#define NI2A 0x1 /* Network Inactive to Active */ -#define NA2I 0x2 /* Network Active to Inactive */ -#define SBU2L 0x4 /* Super Block Unlock to Lock */ -#define SBL2U 0x8 /* Super Block Lock to Unlock */ -#define PRU 0x10 /* Position Register Updated */ -#define MPRU 0x20 /* Maximum Position Register Updated */ -#define DRU 0x40 /* Delay Register Updated */ -#define MDRU 0x80 /* Maximum Delay Register Updated */ -#define SBU 0x100 /* Synchronous Boundary Updated */ -#define ATU 0x200 /* Allocation Table Updated */ -#define FCZ0 0x400 /* Frame Counter 0 Zero */ -#define FCZ1 0x800 /* Frame Counter 1 Zero */ -#define PERR 0x1000 /* Parity Error */ -#define MH2L 0x2000 /* MRXONB High to Low */ -#define ML2H 0x4000 /* MRXONB Low to High */ -#define WUP 0x8000 /* Wake-Up Preamble Received */ -#define FU2L 0x10000 /* Frame Unlock to Lock */ -#define FL2U 0x20000 /* Frame Lock to Unlock */ -#define BU2L 0x40000 /* Block Unlock to Lock */ -#define BL2U 0x80000 /* Block Lock to Unlock */ -#define OBERR 0x100000 /* DMA Out of Bounds Error */ -#define PFL 0x200000 /* PLL Frequency Locked */ -#define SCZ 0x400000 /* System Clock Counter Zero */ -#define FERR 0x800000 /* FIFO Error */ -#define CMR 0x1000000 /* Control Message Received */ -#define CMROF 0x2000000 /* Control Message Receive Buffer Overflow */ -#define CMTS 0x4000000 /* Control Message Transmit Buffer Successfully Sent */ -#define CMTC 0x8000000 /* Control Message Transmit Buffer Successfully Cancelled */ -#define RWRC 0x10000000 /* Remote Write Control Message Completed */ -#define BCZ 0x20000000 /* Block Counter Zero */ -#define BMERR 0x40000000 /* Biphase Mark Coding Error */ -#define DERR 0x80000000 /* DMA Error */ - -/* Bit masks for MXVR_INT_STAT_1 */ - -#define HDONE0 0x1 /* DMA0 Half Done */ -#define DONE0 0x2 /* DMA0 Done */ -#define APR 0x4 /* Asynchronous Packet Received */ -#define APROF 0x8 /* Asynchronous Packet Receive Buffer Overflow */ -#define HDONE1 0x10 /* DMA1 Half Done */ -#define DONE1 0x20 /* DMA1 Done */ -#define APTS 0x40 /* Asynchronous Packet Transmit Buffer Successfully Sent */ -#define APTC 0x80 /* Asynchronous Packet Transmit Buffer Successfully Cancelled */ -#define HDONE2 0x100 /* DMA2 Half Done */ -#define DONE2 0x200 /* DMA2 Done */ -#define APRCE 0x400 /* Asynchronous Packet Receive CRC Error */ -#define APRPE 0x800 /* Asynchronous Packet Receive Packet Error */ -#define HDONE3 0x1000 /* DMA3 Half Done */ -#define DONE3 0x2000 /* DMA3 Done */ -#define HDONE4 0x10000 /* DMA4 Half Done */ -#define DONE4 0x20000 /* DMA4 Done */ -#define HDONE5 0x100000 /* DMA5 Half Done */ -#define DONE5 0x200000 /* DMA5 Done */ -#define HDONE6 0x1000000 /* DMA6 Half Done */ -#define DONE6 0x2000000 /* DMA6 Done */ -#define HDONE7 0x10000000 /* DMA7 Half Done */ -#define DONE7 0x20000000 /* DMA7 Done */ - -/* Bit masks for MXVR_INT_EN_0 */ - -#define NI2AEN 0x1 /* Network Inactive to Active Interrupt Enable */ -#define NA2IEN 0x2 /* Network Active to Inactive Interrupt Enable */ -#define SBU2LEN 0x4 /* Super Block Unlock to Lock Interrupt Enable */ -#define SBL2UEN 0x8 /* Super Block Lock to Unlock Interrupt Enable */ -#define PRUEN 0x10 /* Position Register Updated Interrupt Enable */ -#define MPRUEN 0x20 /* Maximum Position Register Updated Interrupt Enable */ -#define DRUEN 0x40 /* Delay Register Updated Interrupt Enable */ -#define MDRUEN 0x80 /* Maximum Delay Register Updated Interrupt Enable */ -#define SBUEN 0x100 /* Synchronous Boundary Updated Interrupt Enable */ -#define ATUEN 0x200 /* Allocation Table Updated Interrupt Enable */ -#define FCZ0EN 0x400 /* Frame Counter 0 Zero Interrupt Enable */ -#define FCZ1EN 0x800 /* Frame Counter 1 Zero Interrupt Enable */ -#define PERREN 0x1000 /* Parity Error Interrupt Enable */ -#define MH2LEN 0x2000 /* MRXONB High to Low Interrupt Enable */ -#define ML2HEN 0x4000 /* MRXONB Low to High Interrupt Enable */ -#define WUPEN 0x8000 /* Wake-Up Preamble Received Interrupt Enable */ -#define FU2LEN 0x10000 /* Frame Unlock to Lock Interrupt Enable */ -#define FL2UEN 0x20000 /* Frame Lock to Unlock Interrupt Enable */ -#define BU2LEN 0x40000 /* Block Unlock to Lock Interrupt Enable */ -#define BL2UEN 0x80000 /* Block Lock to Unlock Interrupt Enable */ -#define OBERREN 0x100000 /* DMA Out of Bounds Error Interrupt Enable */ -#define PFLEN 0x200000 /* PLL Frequency Locked Interrupt Enable */ -#define SCZEN 0x400000 /* System Clock Counter Zero Interrupt Enable */ -#define FERREN 0x800000 /* FIFO Error Interrupt Enable */ -#define CMREN 0x1000000 /* Control Message Received Interrupt Enable */ -#define CMROFEN 0x2000000 /* Control Message Receive Buffer Overflow Interrupt Enable */ -#define CMTSEN 0x4000000 /* Control Message Transmit Buffer Successfully Sent Interrupt Enable */ -#define CMTCEN 0x8000000 /* Control Message Transmit Buffer Successfully Cancelled Interrupt Enable */ -#define RWRCEN 0x10000000 /* Remote Write Control Message Completed Interrupt Enable */ -#define BCZEN 0x20000000 /* Block Counter Zero Interrupt Enable */ -#define BMERREN 0x40000000 /* Biphase Mark Coding Error Interrupt Enable */ -#define DERREN 0x80000000 /* DMA Error Interrupt Enable */ - -/* Bit masks for MXVR_INT_EN_1 */ - -#define HDONEEN0 0x1 /* DMA0 Half Done Interrupt Enable */ -#define DONEEN0 0x2 /* DMA0 Done Interrupt Enable */ -#define APREN 0x4 /* Asynchronous Packet Received Interrupt Enable */ -#define APROFEN 0x8 /* Asynchronous Packet Receive Buffer Overflow Interrupt Enable */ -#define HDONEEN1 0x10 /* DMA1 Half Done Interrupt Enable */ -#define DONEEN1 0x20 /* DMA1 Done Interrupt Enable */ -#define APTSEN 0x40 /* Asynchronous Packet Transmit Buffer Successfully Sent Interrupt Enable */ -#define APTCEN 0x80 /* Asynchronous Packet Transmit Buffer Successfully Cancelled Interrupt Enable */ -#define HDONEEN2 0x100 /* DMA2 Half Done Interrupt Enable */ -#define DONEEN2 0x200 /* DMA2 Done Interrupt Enable */ -#define APRCEEN 0x400 /* Asynchronous Packet Receive CRC Error Interrupt Enable */ -#define APRPEEN 0x800 /* Asynchronous Packet Receive Packet Error Interrupt Enable */ -#define HDONEEN3 0x1000 /* DMA3 Half Done Interrupt Enable */ -#define DONEEN3 0x2000 /* DMA3 Done Interrupt Enable */ -#define HDONEEN4 0x10000 /* DMA4 Half Done Interrupt Enable */ -#define DONEEN4 0x20000 /* DMA4 Done Interrupt Enable */ -#define HDONEEN5 0x100000 /* DMA5 Half Done Interrupt Enable */ -#define DONEEN5 0x200000 /* DMA5 Done Interrupt Enable */ -#define HDONEEN6 0x1000000 /* DMA6 Half Done Interrupt Enable */ -#define DONEEN6 0x2000000 /* DMA6 Done Interrupt Enable */ -#define HDONEEN7 0x10000000 /* DMA7 Half Done Interrupt Enable */ -#define DONEEN7 0x20000000 /* DMA7 Done Interrupt Enable */ - -/* Bit masks for MXVR_POSITION */ - -#define POSITION 0x3f /* Node Position */ -#define PVALID 0x8000 /* Node Position Valid */ - -/* Bit masks for MXVR_MAX_POSITION */ - -#define MPOSITION 0x3f /* Maximum Node Position */ -#define MPVALID 0x8000 /* Maximum Node Position Valid */ - -/* Bit masks for MXVR_DELAY */ - -#define DELAY 0x3f /* Node Frame Delay */ -#define DVALID 0x8000 /* Node Frame Delay Valid */ - -/* Bit masks for MXVR_MAX_DELAY */ - -#define MDELAY 0x3f /* Maximum Node Frame Delay */ -#define MDVALID 0x8000 /* Maximum Node Frame Delay Valid */ - -/* Bit masks for MXVR_LADDR */ - -#define LADDR 0xffff /* Logical Address */ -#define LVALID 0x80000000 /* Logical Address Valid */ - -/* Bit masks for MXVR_GADDR */ - -#define GADDRL 0xff /* Group Address Lower Byte */ -#define GVALID 0x8000 /* Group Address Valid */ - -/* Bit masks for MXVR_AADDR */ - -#define AADDR 0xffff /* Alternate Address */ -#define AVALID 0x80000000 /* Alternate Address Valid */ - -/* Bit masks for MXVR_ALLOC_0 */ - -#define CL0 0x7f /* Channel 0 Connection Label */ -#define CIU0 0x80 /* Channel 0 In Use */ -#define CL1 0x7f00 /* Channel 0 Connection Label */ -#define CIU1 0x8000 /* Channel 0 In Use */ -#define CL2 0x7f0000 /* Channel 0 Connection Label */ -#define CIU2 0x800000 /* Channel 0 In Use */ -#define CL3 0x7f000000 /* Channel 0 Connection Label */ -#define CIU3 0x80000000 /* Channel 0 In Use */ - -/* Bit masks for MXVR_ALLOC_1 */ - -#define CL4 0x7f /* Channel 4 Connection Label */ -#define CIU4 0x80 /* Channel 4 In Use */ -#define CL5 0x7f00 /* Channel 5 Connection Label */ -#define CIU5 0x8000 /* Channel 5 In Use */ -#define CL6 0x7f0000 /* Channel 6 Connection Label */ -#define CIU6 0x800000 /* Channel 6 In Use */ -#define CL7 0x7f000000 /* Channel 7 Connection Label */ -#define CIU7 0x80000000 /* Channel 7 In Use */ - -/* Bit masks for MXVR_ALLOC_2 */ - -#define CL8 0x7f /* Channel 8 Connection Label */ -#define CIU8 0x80 /* Channel 8 In Use */ -#define CL9 0x7f00 /* Channel 9 Connection Label */ -#define CIU9 0x8000 /* Channel 9 In Use */ -#define CL10 0x7f0000 /* Channel 10 Connection Label */ -#define CIU10 0x800000 /* Channel 10 In Use */ -#define CL11 0x7f000000 /* Channel 11 Connection Label */ -#define CIU11 0x80000000 /* Channel 11 In Use */ - -/* Bit masks for MXVR_ALLOC_3 */ - -#define CL12 0x7f /* Channel 12 Connection Label */ -#define CIU12 0x80 /* Channel 12 In Use */ -#define CL13 0x7f00 /* Channel 13 Connection Label */ -#define CIU13 0x8000 /* Channel 13 In Use */ -#define CL14 0x7f0000 /* Channel 14 Connection Label */ -#define CIU14 0x800000 /* Channel 14 In Use */ -#define CL15 0x7f000000 /* Channel 15 Connection Label */ -#define CIU15 0x80000000 /* Channel 15 In Use */ - -/* Bit masks for MXVR_ALLOC_4 */ - -#define CL16 0x7f /* Channel 16 Connection Label */ -#define CIU16 0x80 /* Channel 16 In Use */ -#define CL17 0x7f00 /* Channel 17 Connection Label */ -#define CIU17 0x8000 /* Channel 17 In Use */ -#define CL18 0x7f0000 /* Channel 18 Connection Label */ -#define CIU18 0x800000 /* Channel 18 In Use */ -#define CL19 0x7f000000 /* Channel 19 Connection Label */ -#define CIU19 0x80000000 /* Channel 19 In Use */ - -/* Bit masks for MXVR_ALLOC_5 */ - -#define CL20 0x7f /* Channel 20 Connection Label */ -#define CIU20 0x80 /* Channel 20 In Use */ -#define CL21 0x7f00 /* Channel 21 Connection Label */ -#define CIU21 0x8000 /* Channel 21 In Use */ -#define CL22 0x7f0000 /* Channel 22 Connection Label */ -#define CIU22 0x800000 /* Channel 22 In Use */ -#define CL23 0x7f000000 /* Channel 23 Connection Label */ -#define CIU23 0x80000000 /* Channel 23 In Use */ - -/* Bit masks for MXVR_ALLOC_6 */ - -#define CL24 0x7f /* Channel 24 Connection Label */ -#define CIU24 0x80 /* Channel 24 In Use */ -#define CL25 0x7f00 /* Channel 25 Connection Label */ -#define CIU25 0x8000 /* Channel 25 In Use */ -#define CL26 0x7f0000 /* Channel 26 Connection Label */ -#define CIU26 0x800000 /* Channel 26 In Use */ -#define CL27 0x7f000000 /* Channel 27 Connection Label */ -#define CIU27 0x80000000 /* Channel 27 In Use */ - -/* Bit masks for MXVR_ALLOC_7 */ - -#define CL28 0x7f /* Channel 28 Connection Label */ -#define CIU28 0x80 /* Channel 28 In Use */ -#define CL29 0x7f00 /* Channel 29 Connection Label */ -#define CIU29 0x8000 /* Channel 29 In Use */ -#define CL30 0x7f0000 /* Channel 30 Connection Label */ -#define CIU30 0x800000 /* Channel 30 In Use */ -#define CL31 0x7f000000 /* Channel 31 Connection Label */ -#define CIU31 0x80000000 /* Channel 31 In Use */ - -/* Bit masks for MXVR_ALLOC_8 */ - -#define CL32 0x7f /* Channel 32 Connection Label */ -#define CIU32 0x80 /* Channel 32 In Use */ -#define CL33 0x7f00 /* Channel 33 Connection Label */ -#define CIU33 0x8000 /* Channel 33 In Use */ -#define CL34 0x7f0000 /* Channel 34 Connection Label */ -#define CIU34 0x800000 /* Channel 34 In Use */ -#define CL35 0x7f000000 /* Channel 35 Connection Label */ -#define CIU35 0x80000000 /* Channel 35 In Use */ - -/* Bit masks for MXVR_ALLOC_9 */ - -#define CL36 0x7f /* Channel 36 Connection Label */ -#define CIU36 0x80 /* Channel 36 In Use */ -#define CL37 0x7f00 /* Channel 37 Connection Label */ -#define CIU37 0x8000 /* Channel 37 In Use */ -#define CL38 0x7f0000 /* Channel 38 Connection Label */ -#define CIU38 0x800000 /* Channel 38 In Use */ -#define CL39 0x7f000000 /* Channel 39 Connection Label */ -#define CIU39 0x80000000 /* Channel 39 In Use */ - -/* Bit masks for MXVR_ALLOC_10 */ - -#define CL40 0x7f /* Channel 40 Connection Label */ -#define CIU40 0x80 /* Channel 40 In Use */ -#define CL41 0x7f00 /* Channel 41 Connection Label */ -#define CIU41 0x8000 /* Channel 41 In Use */ -#define CL42 0x7f0000 /* Channel 42 Connection Label */ -#define CIU42 0x800000 /* Channel 42 In Use */ -#define CL43 0x7f000000 /* Channel 43 Connection Label */ -#define CIU43 0x80000000 /* Channel 43 In Use */ - -/* Bit masks for MXVR_ALLOC_11 */ - -#define CL44 0x7f /* Channel 44 Connection Label */ -#define CIU44 0x80 /* Channel 44 In Use */ -#define CL45 0x7f00 /* Channel 45 Connection Label */ -#define CIU45 0x8000 /* Channel 45 In Use */ -#define CL46 0x7f0000 /* Channel 46 Connection Label */ -#define CIU46 0x800000 /* Channel 46 In Use */ -#define CL47 0x7f000000 /* Channel 47 Connection Label */ -#define CIU47 0x80000000 /* Channel 47 In Use */ - -/* Bit masks for MXVR_ALLOC_12 */ - -#define CL48 0x7f /* Channel 48 Connection Label */ -#define CIU48 0x80 /* Channel 48 In Use */ -#define CL49 0x7f00 /* Channel 49 Connection Label */ -#define CIU49 0x8000 /* Channel 49 In Use */ -#define CL50 0x7f0000 /* Channel 50 Connection Label */ -#define CIU50 0x800000 /* Channel 50 In Use */ -#define CL51 0x7f000000 /* Channel 51 Connection Label */ -#define CIU51 0x80000000 /* Channel 51 In Use */ - -/* Bit masks for MXVR_ALLOC_13 */ - -#define CL52 0x7f /* Channel 52 Connection Label */ -#define CIU52 0x80 /* Channel 52 In Use */ -#define CL53 0x7f00 /* Channel 53 Connection Label */ -#define CIU53 0x8000 /* Channel 53 In Use */ -#define CL54 0x7f0000 /* Channel 54 Connection Label */ -#define CIU54 0x800000 /* Channel 54 In Use */ -#define CL55 0x7f000000 /* Channel 55 Connection Label */ -#define CIU55 0x80000000 /* Channel 55 In Use */ - -/* Bit masks for MXVR_ALLOC_14 */ - -#define CL56 0x7f /* Channel 56 Connection Label */ -#define CIU56 0x80 /* Channel 56 In Use */ -#define CL57 0x7f00 /* Channel 57 Connection Label */ -#define CIU57 0x8000 /* Channel 57 In Use */ -#define CL58 0x7f0000 /* Channel 58 Connection Label */ -#define CIU58 0x800000 /* Channel 58 In Use */ -#define CL59 0x7f000000 /* Channel 59 Connection Label */ -#define CIU59 0x80000000 /* Channel 59 In Use */ - -/* MXVR_SYNC_LCHAN_0 Masks */ - -#define LCHANPC0 0x0000000Flu -#define LCHANPC1 0x000000F0lu -#define LCHANPC2 0x00000F00lu -#define LCHANPC3 0x0000F000lu -#define LCHANPC4 0x000F0000lu -#define LCHANPC5 0x00F00000lu -#define LCHANPC6 0x0F000000lu -#define LCHANPC7 0xF0000000lu - - -/* MXVR_SYNC_LCHAN_1 Masks */ - -#define LCHANPC8 0x0000000Flu -#define LCHANPC9 0x000000F0lu -#define LCHANPC10 0x00000F00lu -#define LCHANPC11 0x0000F000lu -#define LCHANPC12 0x000F0000lu -#define LCHANPC13 0x00F00000lu -#define LCHANPC14 0x0F000000lu -#define LCHANPC15 0xF0000000lu - - -/* MXVR_SYNC_LCHAN_2 Masks */ - -#define LCHANPC16 0x0000000Flu -#define LCHANPC17 0x000000F0lu -#define LCHANPC18 0x00000F00lu -#define LCHANPC19 0x0000F000lu -#define LCHANPC20 0x000F0000lu -#define LCHANPC21 0x00F00000lu -#define LCHANPC22 0x0F000000lu -#define LCHANPC23 0xF0000000lu - - -/* MXVR_SYNC_LCHAN_3 Masks */ - -#define LCHANPC24 0x0000000Flu -#define LCHANPC25 0x000000F0lu -#define LCHANPC26 0x00000F00lu -#define LCHANPC27 0x0000F000lu -#define LCHANPC28 0x000F0000lu -#define LCHANPC29 0x00F00000lu -#define LCHANPC30 0x0F000000lu -#define LCHANPC31 0xF0000000lu - - -/* MXVR_SYNC_LCHAN_4 Masks */ - -#define LCHANPC32 0x0000000Flu -#define LCHANPC33 0x000000F0lu -#define LCHANPC34 0x00000F00lu -#define LCHANPC35 0x0000F000lu -#define LCHANPC36 0x000F0000lu -#define LCHANPC37 0x00F00000lu -#define LCHANPC38 0x0F000000lu -#define LCHANPC39 0xF0000000lu - - -/* MXVR_SYNC_LCHAN_5 Masks */ - -#define LCHANPC40 0x0000000Flu -#define LCHANPC41 0x000000F0lu -#define LCHANPC42 0x00000F00lu -#define LCHANPC43 0x0000F000lu -#define LCHANPC44 0x000F0000lu -#define LCHANPC45 0x00F00000lu -#define LCHANPC46 0x0F000000lu -#define LCHANPC47 0xF0000000lu - - -/* MXVR_SYNC_LCHAN_6 Masks */ - -#define LCHANPC48 0x0000000Flu -#define LCHANPC49 0x000000F0lu -#define LCHANPC50 0x00000F00lu -#define LCHANPC51 0x0000F000lu -#define LCHANPC52 0x000F0000lu -#define LCHANPC53 0x00F00000lu -#define LCHANPC54 0x0F000000lu -#define LCHANPC55 0xF0000000lu - - -/* MXVR_SYNC_LCHAN_7 Masks */ - -#define LCHANPC56 0x0000000Flu -#define LCHANPC57 0x000000F0lu -#define LCHANPC58 0x00000F00lu -#define LCHANPC59 0x0000F000lu - -/* Bit masks for MXVR_DMAx_CONFIG */ - -#define MDMAEN 0x1 /* DMA Channel Enable */ -#define DMADD 0x2 /* DMA Channel Direction */ -#define BY4SWAPEN 0x20 /* DMA Channel Four Byte Swap Enable */ -#define LCHAN 0x3c0 /* DMA Channel Logical Channel */ -#define BITSWAPEN 0x400 /* DMA Channel Bit Swap Enable */ -#define BY2SWAPEN 0x800 /* DMA Channel Two Byte Swap Enable */ -#define MFLOW 0x7000 /* DMA Channel Operation Flow */ -#define FIXEDPM 0x80000 /* DMA Channel Fixed Pattern Matching Select */ -#define STARTPAT 0x300000 /* DMA Channel Start Pattern Select */ -#define STOPPAT 0xc00000 /* DMA Channel Stop Pattern Select */ -#define COUNTPOS 0x1c000000 /* DMA Channel Count Position */ - -/* Bit masks for MXVR_AP_CTL */ - -#define STARTAP 0x1 /* Start Asynchronous Packet Transmission */ -#define CANCELAP 0x2 /* Cancel Asynchronous Packet Transmission */ -#define RESETAP 0x4 /* Reset Asynchronous Packet Arbitration */ -#define APRBE0 0x4000 /* Asynchronous Packet Receive Buffer Entry 0 */ -#define APRBE1 0x8000 /* Asynchronous Packet Receive Buffer Entry 1 */ - -/* Bit masks for MXVR_APRB_START_ADDR */ - -#define MXVR_APRB_START_ADDR_MASK 0x1fffffe /* Asynchronous Packet Receive Buffer Start Address */ - -/* Bit masks for MXVR_APRB_CURR_ADDR */ - -#define MXVR_APRB_CURR_ADDR_MASK 0xffffffff /* Asynchronous Packet Receive Buffer Current Address */ - -/* Bit masks for MXVR_APTB_START_ADDR */ - -#define MXVR_APTB_START_ADDR_MASK 0x1fffffe /* Asynchronous Packet Transmit Buffer Start Address */ - -/* Bit masks for MXVR_APTB_CURR_ADDR */ - -#define MXVR_APTB_CURR_ADDR_MASK 0xffffffff /* Asynchronous Packet Transmit Buffer Current Address */ - -/* Bit masks for MXVR_CM_CTL */ - -#define STARTCM 0x1 /* Start Control Message Transmission */ -#define CANCELCM 0x2 /* Cancel Control Message Transmission */ -#define CMRBE0 0x10000 /* Control Message Receive Buffer Entry 0 */ -#define CMRBE1 0x20000 /* Control Message Receive Buffer Entry 1 */ -#define CMRBE2 0x40000 /* Control Message Receive Buffer Entry 2 */ -#define CMRBE3 0x80000 /* Control Message Receive Buffer Entry 3 */ -#define CMRBE4 0x100000 /* Control Message Receive Buffer Entry 4 */ -#define CMRBE5 0x200000 /* Control Message Receive Buffer Entry 5 */ -#define CMRBE6 0x400000 /* Control Message Receive Buffer Entry 6 */ -#define CMRBE7 0x800000 /* Control Message Receive Buffer Entry 7 */ -#define CMRBE8 0x1000000 /* Control Message Receive Buffer Entry 8 */ -#define CMRBE9 0x2000000 /* Control Message Receive Buffer Entry 9 */ -#define CMRBE10 0x4000000 /* Control Message Receive Buffer Entry 10 */ -#define CMRBE11 0x8000000 /* Control Message Receive Buffer Entry 11 */ -#define CMRBE12 0x10000000 /* Control Message Receive Buffer Entry 12 */ -#define CMRBE13 0x20000000 /* Control Message Receive Buffer Entry 13 */ -#define CMRBE14 0x40000000 /* Control Message Receive Buffer Entry 14 */ -#define CMRBE15 0x80000000 /* Control Message Receive Buffer Entry 15 */ - -/* Bit masks for MXVR_CMRB_START_ADDR */ - -#define MXVR_CMRB_START_ADDR_MASK 0x1fffffe /* Control Message Receive Buffer Start Address */ - -/* Bit masks for MXVR_CMRB_CURR_ADDR */ - -#define MXVR_CMRB_CURR_ADDR_MASK 0xffffffff /* Control Message Receive Buffer Current Address */ - -/* Bit masks for MXVR_CMTB_START_ADDR */ - -#define MXVR_CMTB_START_ADDR_MASK 0x1fffffe /* Control Message Transmit Buffer Start Address */ - -/* Bit masks for MXVR_CMTB_CURR_ADDR */ - -#define MXVR_CMTB_CURR_ADDR_MASK 0xffffffff /* Control Message Transmit Buffer Current Address */ - -/* Bit masks for MXVR_RRDB_START_ADDR */ - -#define MXVR_RRDB_START_ADDR_MASK 0x1fffffe /* Remote Read Buffer Start Address */ - -/* Bit masks for MXVR_RRDB_CURR_ADDR */ - -#define MXVR_RRDB_CURR_ADDR_MASK 0xffffffff /* Remote Read Buffer Current Address */ - -/* Bit masks for MXVR_PAT_DATAx */ - -#define MATCH_DATA_0 0xff /* Pattern Match Data Byte 0 */ -#define MATCH_DATA_1 0xff00 /* Pattern Match Data Byte 1 */ -#define MATCH_DATA_2 0xff0000 /* Pattern Match Data Byte 2 */ -#define MATCH_DATA_3 0xff000000 /* Pattern Match Data Byte 3 */ - -/* Bit masks for MXVR_PAT_EN_0 */ - -#define MATCH_EN_0_0 0x1 /* Pattern Match Enable Byte 0 Bit 0 */ -#define MATCH_EN_0_1 0x2 /* Pattern Match Enable Byte 0 Bit 1 */ -#define MATCH_EN_0_2 0x4 /* Pattern Match Enable Byte 0 Bit 2 */ -#define MATCH_EN_0_3 0x8 /* Pattern Match Enable Byte 0 Bit 3 */ -#define MATCH_EN_0_4 0x10 /* Pattern Match Enable Byte 0 Bit 4 */ -#define MATCH_EN_0_5 0x20 /* Pattern Match Enable Byte 0 Bit 5 */ -#define MATCH_EN_0_6 0x40 /* Pattern Match Enable Byte 0 Bit 6 */ -#define MATCH_EN_0_7 0x80 /* Pattern Match Enable Byte 0 Bit 7 */ -#define MATCH_EN_1_0 0x100 /* Pattern Match Enable Byte 1 Bit 0 */ -#define MATCH_EN_1_1 0x200 /* Pattern Match Enable Byte 1 Bit 1 */ -#define MATCH_EN_1_2 0x400 /* Pattern Match Enable Byte 1 Bit 2 */ -#define MATCH_EN_1_3 0x800 /* Pattern Match Enable Byte 1 Bit 3 */ -#define MATCH_EN_1_4 0x1000 /* Pattern Match Enable Byte 1 Bit 4 */ -#define MATCH_EN_1_5 0x2000 /* Pattern Match Enable Byte 1 Bit 5 */ -#define MATCH_EN_1_6 0x4000 /* Pattern Match Enable Byte 1 Bit 6 */ -#define MATCH_EN_1_7 0x8000 /* Pattern Match Enable Byte 1 Bit 7 */ -#define MATCH_EN_2_0 0x10000 /* Pattern Match Enable Byte 2 Bit 0 */ -#define MATCH_EN_2_1 0x20000 /* Pattern Match Enable Byte 2 Bit 1 */ -#define MATCH_EN_2_2 0x40000 /* Pattern Match Enable Byte 2 Bit 2 */ -#define MATCH_EN_2_3 0x80000 /* Pattern Match Enable Byte 2 Bit 3 */ -#define MATCH_EN_2_4 0x100000 /* Pattern Match Enable Byte 2 Bit 4 */ -#define MATCH_EN_2_5 0x200000 /* Pattern Match Enable Byte 2 Bit 5 */ -#define MATCH_EN_2_6 0x400000 /* Pattern Match Enable Byte 2 Bit 6 */ -#define MATCH_EN_2_7 0x800000 /* Pattern Match Enable Byte 2 Bit 7 */ -#define MATCH_EN_3_0 0x1000000 /* Pattern Match Enable Byte 3 Bit 0 */ -#define MATCH_EN_3_1 0x2000000 /* Pattern Match Enable Byte 3 Bit 1 */ -#define MATCH_EN_3_2 0x4000000 /* Pattern Match Enable Byte 3 Bit 2 */ -#define MATCH_EN_3_3 0x8000000 /* Pattern Match Enable Byte 3 Bit 3 */ -#define MATCH_EN_3_4 0x10000000 /* Pattern Match Enable Byte 3 Bit 4 */ -#define MATCH_EN_3_5 0x20000000 /* Pattern Match Enable Byte 3 Bit 5 */ -#define MATCH_EN_3_6 0x40000000 /* Pattern Match Enable Byte 3 Bit 6 */ -#define MATCH_EN_3_7 0x80000000 /* Pattern Match Enable Byte 3 Bit 7 */ - -/* Bit masks for MXVR_PAT_EN_1 */ - -#define MATCH_EN_0_0 0x1 /* Pattern Match Enable Byte 0 Bit 0 */ -#define MATCH_EN_0_1 0x2 /* Pattern Match Enable Byte 0 Bit 1 */ -#define MATCH_EN_0_2 0x4 /* Pattern Match Enable Byte 0 Bit 2 */ -#define MATCH_EN_0_3 0x8 /* Pattern Match Enable Byte 0 Bit 3 */ -#define MATCH_EN_0_4 0x10 /* Pattern Match Enable Byte 0 Bit 4 */ -#define MATCH_EN_0_5 0x20 /* Pattern Match Enable Byte 0 Bit 5 */ -#define MATCH_EN_0_6 0x40 /* Pattern Match Enable Byte 0 Bit 6 */ -#define MATCH_EN_0_7 0x80 /* Pattern Match Enable Byte 0 Bit 7 */ -#define MATCH_EN_1_0 0x100 /* Pattern Match Enable Byte 1 Bit 0 */ -#define MATCH_EN_1_1 0x200 /* Pattern Match Enable Byte 1 Bit 1 */ -#define MATCH_EN_1_2 0x400 /* Pattern Match Enable Byte 1 Bit 2 */ -#define MATCH_EN_1_3 0x800 /* Pattern Match Enable Byte 1 Bit 3 */ -#define MATCH_EN_1_4 0x1000 /* Pattern Match Enable Byte 1 Bit 4 */ -#define MATCH_EN_1_5 0x2000 /* Pattern Match Enable Byte 1 Bit 5 */ -#define MATCH_EN_1_6 0x4000 /* Pattern Match Enable Byte 1 Bit 6 */ -#define MATCH_EN_1_7 0x8000 /* Pattern Match Enable Byte 1 Bit 7 */ -#define MATCH_EN_2_0 0x10000 /* Pattern Match Enable Byte 2 Bit 0 */ -#define MATCH_EN_2_1 0x20000 /* Pattern Match Enable Byte 2 Bit 1 */ -#define MATCH_EN_2_2 0x40000 /* Pattern Match Enable Byte 2 Bit 2 */ -#define MATCH_EN_2_3 0x80000 /* Pattern Match Enable Byte 2 Bit 3 */ -#define MATCH_EN_2_4 0x100000 /* Pattern Match Enable Byte 2 Bit 4 */ -#define MATCH_EN_2_5 0x200000 /* Pattern Match Enable Byte 2 Bit 5 */ -#define MATCH_EN_2_6 0x400000 /* Pattern Match Enable Byte 2 Bit 6 */ -#define MATCH_EN_2_7 0x800000 /* Pattern Match Enable Byte 2 Bit 7 */ -#define MATCH_EN_3_0 0x1000000 /* Pattern Match Enable Byte 3 Bit 0 */ -#define MATCH_EN_3_1 0x2000000 /* Pattern Match Enable Byte 3 Bit 1 */ -#define MATCH_EN_3_2 0x4000000 /* Pattern Match Enable Byte 3 Bit 2 */ -#define MATCH_EN_3_3 0x8000000 /* Pattern Match Enable Byte 3 Bit 3 */ -#define MATCH_EN_3_4 0x10000000 /* Pattern Match Enable Byte 3 Bit 4 */ -#define MATCH_EN_3_5 0x20000000 /* Pattern Match Enable Byte 3 Bit 5 */ -#define MATCH_EN_3_6 0x40000000 /* Pattern Match Enable Byte 3 Bit 6 */ -#define MATCH_EN_3_7 0x80000000 /* Pattern Match Enable Byte 3 Bit 7 */ - -/* Bit masks for MXVR_FRAME_CNT_0 */ - -#define FCNT 0xffff /* Frame Count */ - -/* Bit masks for MXVR_FRAME_CNT_1 */ - -#define FCNT 0xffff /* Frame Count */ - -/* Bit masks for MXVR_ROUTING_0 */ - -#define TX_CH0 0x3f /* Transmit Channel 0 */ -#define MUTE_CH0 0x80 /* Mute Channel 0 */ -#define TX_CH1 0x3f00 /* Transmit Channel 0 */ -#define MUTE_CH1 0x8000 /* Mute Channel 0 */ -#define TX_CH2 0x3f0000 /* Transmit Channel 0 */ -#define MUTE_CH2 0x800000 /* Mute Channel 0 */ -#define TX_CH3 0x3f000000 /* Transmit Channel 0 */ -#define MUTE_CH3 0x80000000 /* Mute Channel 0 */ - -/* Bit masks for MXVR_ROUTING_1 */ - -#define TX_CH4 0x3f /* Transmit Channel 4 */ -#define MUTE_CH4 0x80 /* Mute Channel 4 */ -#define TX_CH5 0x3f00 /* Transmit Channel 5 */ -#define MUTE_CH5 0x8000 /* Mute Channel 5 */ -#define TX_CH6 0x3f0000 /* Transmit Channel 6 */ -#define MUTE_CH6 0x800000 /* Mute Channel 6 */ -#define TX_CH7 0x3f000000 /* Transmit Channel 7 */ -#define MUTE_CH7 0x80000000 /* Mute Channel 7 */ - -/* Bit masks for MXVR_ROUTING_2 */ - -#define TX_CH8 0x3f /* Transmit Channel 8 */ -#define MUTE_CH8 0x80 /* Mute Channel 8 */ -#define TX_CH9 0x3f00 /* Transmit Channel 9 */ -#define MUTE_CH9 0x8000 /* Mute Channel 9 */ -#define TX_CH10 0x3f0000 /* Transmit Channel 10 */ -#define MUTE_CH10 0x800000 /* Mute Channel 10 */ -#define TX_CH11 0x3f000000 /* Transmit Channel 11 */ -#define MUTE_CH11 0x80000000 /* Mute Channel 11 */ - -/* Bit masks for MXVR_ROUTING_3 */ - -#define TX_CH12 0x3f /* Transmit Channel 12 */ -#define MUTE_CH12 0x80 /* Mute Channel 12 */ -#define TX_CH13 0x3f00 /* Transmit Channel 13 */ -#define MUTE_CH13 0x8000 /* Mute Channel 13 */ -#define TX_CH14 0x3f0000 /* Transmit Channel 14 */ -#define MUTE_CH14 0x800000 /* Mute Channel 14 */ -#define TX_CH15 0x3f000000 /* Transmit Channel 15 */ -#define MUTE_CH15 0x80000000 /* Mute Channel 15 */ - -/* Bit masks for MXVR_ROUTING_4 */ - -#define TX_CH16 0x3f /* Transmit Channel 16 */ -#define MUTE_CH16 0x80 /* Mute Channel 16 */ -#define TX_CH17 0x3f00 /* Transmit Channel 17 */ -#define MUTE_CH17 0x8000 /* Mute Channel 17 */ -#define TX_CH18 0x3f0000 /* Transmit Channel 18 */ -#define MUTE_CH18 0x800000 /* Mute Channel 18 */ -#define TX_CH19 0x3f000000 /* Transmit Channel 19 */ -#define MUTE_CH19 0x80000000 /* Mute Channel 19 */ - -/* Bit masks for MXVR_ROUTING_5 */ - -#define TX_CH20 0x3f /* Transmit Channel 20 */ -#define MUTE_CH20 0x80 /* Mute Channel 20 */ -#define TX_CH21 0x3f00 /* Transmit Channel 21 */ -#define MUTE_CH21 0x8000 /* Mute Channel 21 */ -#define TX_CH22 0x3f0000 /* Transmit Channel 22 */ -#define MUTE_CH22 0x800000 /* Mute Channel 22 */ -#define TX_CH23 0x3f000000 /* Transmit Channel 23 */ -#define MUTE_CH23 0x80000000 /* Mute Channel 23 */ - -/* Bit masks for MXVR_ROUTING_6 */ - -#define TX_CH24 0x3f /* Transmit Channel 24 */ -#define MUTE_CH24 0x80 /* Mute Channel 24 */ -#define TX_CH25 0x3f00 /* Transmit Channel 25 */ -#define MUTE_CH25 0x8000 /* Mute Channel 25 */ -#define TX_CH26 0x3f0000 /* Transmit Channel 26 */ -#define MUTE_CH26 0x800000 /* Mute Channel 26 */ -#define TX_CH27 0x3f000000 /* Transmit Channel 27 */ -#define MUTE_CH27 0x80000000 /* Mute Channel 27 */ - -/* Bit masks for MXVR_ROUTING_7 */ - -#define TX_CH28 0x3f /* Transmit Channel 28 */ -#define MUTE_CH28 0x80 /* Mute Channel 28 */ -#define TX_CH29 0x3f00 /* Transmit Channel 29 */ -#define MUTE_CH29 0x8000 /* Mute Channel 29 */ -#define TX_CH30 0x3f0000 /* Transmit Channel 30 */ -#define MUTE_CH30 0x800000 /* Mute Channel 30 */ -#define TX_CH31 0x3f000000 /* Transmit Channel 31 */ -#define MUTE_CH31 0x80000000 /* Mute Channel 31 */ - -/* Bit masks for MXVR_ROUTING_8 */ - -#define TX_CH32 0x3f /* Transmit Channel 32 */ -#define MUTE_CH32 0x80 /* Mute Channel 32 */ -#define TX_CH33 0x3f00 /* Transmit Channel 33 */ -#define MUTE_CH33 0x8000 /* Mute Channel 33 */ -#define TX_CH34 0x3f0000 /* Transmit Channel 34 */ -#define MUTE_CH34 0x800000 /* Mute Channel 34 */ -#define TX_CH35 0x3f000000 /* Transmit Channel 35 */ -#define MUTE_CH35 0x80000000 /* Mute Channel 35 */ - -/* Bit masks for MXVR_ROUTING_9 */ - -#define TX_CH36 0x3f /* Transmit Channel 36 */ -#define MUTE_CH36 0x80 /* Mute Channel 36 */ -#define TX_CH37 0x3f00 /* Transmit Channel 37 */ -#define MUTE_CH37 0x8000 /* Mute Channel 37 */ -#define TX_CH38 0x3f0000 /* Transmit Channel 38 */ -#define MUTE_CH38 0x800000 /* Mute Channel 38 */ -#define TX_CH39 0x3f000000 /* Transmit Channel 39 */ -#define MUTE_CH39 0x80000000 /* Mute Channel 39 */ - -/* Bit masks for MXVR_ROUTING_10 */ - -#define TX_CH40 0x3f /* Transmit Channel 40 */ -#define MUTE_CH40 0x80 /* Mute Channel 40 */ -#define TX_CH41 0x3f00 /* Transmit Channel 41 */ -#define MUTE_CH41 0x8000 /* Mute Channel 41 */ -#define TX_CH42 0x3f0000 /* Transmit Channel 42 */ -#define MUTE_CH42 0x800000 /* Mute Channel 42 */ -#define TX_CH43 0x3f000000 /* Transmit Channel 43 */ -#define MUTE_CH43 0x80000000 /* Mute Channel 43 */ - -/* Bit masks for MXVR_ROUTING_11 */ - -#define TX_CH44 0x3f /* Transmit Channel 44 */ -#define MUTE_CH44 0x80 /* Mute Channel 44 */ -#define TX_CH45 0x3f00 /* Transmit Channel 45 */ -#define MUTE_CH45 0x8000 /* Mute Channel 45 */ -#define TX_CH46 0x3f0000 /* Transmit Channel 46 */ -#define MUTE_CH46 0x800000 /* Mute Channel 46 */ -#define TX_CH47 0x3f000000 /* Transmit Channel 47 */ -#define MUTE_CH47 0x80000000 /* Mute Channel 47 */ - -/* Bit masks for MXVR_ROUTING_12 */ - -#define TX_CH48 0x3f /* Transmit Channel 48 */ -#define MUTE_CH48 0x80 /* Mute Channel 48 */ -#define TX_CH49 0x3f00 /* Transmit Channel 49 */ -#define MUTE_CH49 0x8000 /* Mute Channel 49 */ -#define TX_CH50 0x3f0000 /* Transmit Channel 50 */ -#define MUTE_CH50 0x800000 /* Mute Channel 50 */ -#define TX_CH51 0x3f000000 /* Transmit Channel 51 */ -#define MUTE_CH51 0x80000000 /* Mute Channel 51 */ - -/* Bit masks for MXVR_ROUTING_13 */ - -#define TX_CH52 0x3f /* Transmit Channel 52 */ -#define MUTE_CH52 0x80 /* Mute Channel 52 */ -#define TX_CH53 0x3f00 /* Transmit Channel 53 */ -#define MUTE_CH53 0x8000 /* Mute Channel 53 */ -#define TX_CH54 0x3f0000 /* Transmit Channel 54 */ -#define MUTE_CH54 0x800000 /* Mute Channel 54 */ -#define TX_CH55 0x3f000000 /* Transmit Channel 55 */ -#define MUTE_CH55 0x80000000 /* Mute Channel 55 */ - -/* Bit masks for MXVR_ROUTING_14 */ - -#define TX_CH56 0x3f /* Transmit Channel 56 */ -#define MUTE_CH56 0x80 /* Mute Channel 56 */ -#define TX_CH57 0x3f00 /* Transmit Channel 57 */ -#define MUTE_CH57 0x8000 /* Mute Channel 57 */ -#define TX_CH58 0x3f0000 /* Transmit Channel 58 */ -#define MUTE_CH58 0x800000 /* Mute Channel 58 */ -#define TX_CH59 0x3f000000 /* Transmit Channel 59 */ -#define MUTE_CH59 0x80000000 /* Mute Channel 59 */ - -/* Bit masks for MXVR_BLOCK_CNT */ - -#define BCNT 0xffff /* Block Count */ - -/* Bit masks for MXVR_CLK_CTL */ - -#define MXTALCEN 0x1 /* MXVR Crystal Oscillator Clock Enable */ -#define MXTALFEN 0x2 /* MXVR Crystal Oscillator Feedback Enable */ -#define MXTALMUL 0x30 /* MXVR Crystal Multiplier */ -#define CLKX3SEL 0x80 /* Clock Generation Source Select */ -#define MMCLKEN 0x100 /* Master Clock Enable */ -#define MMCLKMUL 0x1e00 /* Master Clock Multiplication Factor */ -#define PLLSMPS 0xe000 /* MXVR PLL State Machine Prescaler */ -#define MBCLKEN 0x10000 /* Bit Clock Enable */ -#define MBCLKDIV 0x1e0000 /* Bit Clock Divide Factor */ -#define INVRX 0x800000 /* Invert Receive Data */ -#define MFSEN 0x1000000 /* Frame Sync Enable */ -#define MFSDIV 0x1e000000 /* Frame Sync Divide Factor */ -#define MFSSEL 0x60000000 /* Frame Sync Select */ -#define MFSSYNC 0x80000000 /* Frame Sync Synchronization Select */ - -/* Bit masks for MXVR_CDRPLL_CTL */ - -#define CDRSMEN 0x1 /* MXVR CDRPLL State Machine Enable */ -#define CDRRSTB 0x2 /* MXVR CDRPLL Reset */ -#define CDRSVCO 0x4 /* MXVR CDRPLL Start VCO */ -#define CDRMODE 0x8 /* MXVR CDRPLL CDR Mode Select */ -#define CDRSCNT 0x3f0 /* MXVR CDRPLL Start Counter */ -#define CDRLCNT 0xfc00 /* MXVR CDRPLL Lock Counter */ -#define CDRSHPSEL 0x3f0000 /* MXVR CDRPLL Shaper Select */ -#define CDRSHPEN 0x800000 /* MXVR CDRPLL Shaper Enable */ -#define CDRCPSEL 0xff000000 /* MXVR CDRPLL Charge Pump Current Select */ - -/* Bit masks for MXVR_FMPLL_CTL */ - -#define FMSMEN 0x1 /* MXVR FMPLL State Machine Enable */ -#define FMRSTB 0x2 /* MXVR FMPLL Reset */ -#define FMSVCO 0x4 /* MXVR FMPLL Start VCO */ -#define FMSCNT 0x3f0 /* MXVR FMPLL Start Counter */ -#define FMLCNT 0xfc00 /* MXVR FMPLL Lock Counter */ -#define FMCPSEL 0xff000000 /* MXVR FMPLL Charge Pump Current Select */ - -/* Bit masks for MXVR_PIN_CTL */ - -#define MTXONBOD 0x1 /* MTXONB Open Drain Select */ -#define MTXONBG 0x2 /* MTXONB Gates MTX Select */ -#define MFSOE 0x10 /* MFS Output Enable */ -#define MFSGPSEL 0x20 /* MFS General Purpose Output Select */ -#define MFSGPDAT 0x40 /* MFS General Purpose Output Data */ - -/* Bit masks for MXVR_SCLK_CNT */ - -#define SCNT 0xffff /* System Clock Count */ - -/* Bit masks for KPAD_CTL */ - -#define KPAD_EN 0x1 /* Keypad Enable */ -#define KPAD_IRQMODE 0x6 /* Key Press Interrupt Enable */ -#define KPAD_ROWEN 0x1c00 /* Row Enable Width */ -#define KPAD_COLEN 0xe000 /* Column Enable Width */ - -/* Bit masks for KPAD_PRESCALE */ - -#define KPAD_PRESCALE_VAL 0x3f /* Key Prescale Value */ - -/* Bit masks for KPAD_MSEL */ - -#define DBON_SCALE 0xff /* Debounce Scale Value */ -#define COLDRV_SCALE 0xff00 /* Column Driver Scale Value */ - -/* Bit masks for KPAD_ROWCOL */ - -#define KPAD_ROW 0xff /* Rows Pressed */ -#define KPAD_COL 0xff00 /* Columns Pressed */ - -/* Bit masks for KPAD_STAT */ - -#define KPAD_IRQ 0x1 /* Keypad Interrupt Status */ -#define KPAD_MROWCOL 0x6 /* Multiple Row/Column Keypress Status */ -#define KPAD_PRESSED 0x8 /* Key press current status */ - -/* Bit masks for KPAD_SOFTEVAL */ - -#define KPAD_SOFTEVAL_E 0x2 /* Software Programmable Force Evaluate */ - -/* Bit masks for SDH_COMMAND */ - -#define CMD_IDX 0x3f /* Command Index */ -#define CMD_RSP 0x40 /* Response */ -#define CMD_L_RSP 0x80 /* Long Response */ -#define CMD_INT_E 0x100 /* Command Interrupt */ -#define CMD_PEND_E 0x200 /* Command Pending */ -#define CMD_E 0x400 /* Command Enable */ - -/* Bit masks for SDH_PWR_CTL */ - -#define PWR_ON 0x3 /* Power On */ -#if 0 -#define TBD 0x3c /* TBD */ -#endif -#define SD_CMD_OD 0x40 /* Open Drain Output */ -#define ROD_CTL 0x80 /* Rod Control */ - -/* Bit masks for SDH_CLK_CTL */ - -#define CLKDIV 0xff /* MC_CLK Divisor */ -#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */ -#define PWR_SV_E 0x200 /* Power Save Enable */ -#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */ -#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */ - -/* Bit masks for SDH_RESP_CMD */ - -#define RESP_CMD 0x3f /* Response Command */ - -/* Bit masks for SDH_DATA_CTL */ - -#define DTX_E 0x1 /* Data Transfer Enable */ -#define DTX_DIR 0x2 /* Data Transfer Direction */ -#define DTX_MODE 0x4 /* Data Transfer Mode */ -#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */ -#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */ - -/* Bit masks for SDH_STATUS */ - -#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */ -#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */ -#define CMD_TIME_OUT 0x4 /* CMD Time Out */ -#define DAT_TIME_OUT 0x8 /* Data Time Out */ -#define TX_UNDERRUN 0x10 /* Transmit Underrun */ -#define RX_OVERRUN 0x20 /* Receive Overrun */ -#define CMD_RESP_END 0x40 /* CMD Response End */ -#define CMD_SENT 0x80 /* CMD Sent */ -#define DAT_END 0x100 /* Data End */ -#define START_BIT_ERR 0x200 /* Start Bit Error */ -#define DAT_BLK_END 0x400 /* Data Block End */ -#define CMD_ACT 0x800 /* CMD Active */ -#define TX_ACT 0x1000 /* Transmit Active */ -#define RX_ACT 0x2000 /* Receive Active */ -#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */ -#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */ -#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */ -#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */ -#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */ -#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */ -#define TX_DAT_RDY 0x100000 /* Transmit Data Available */ -#define RX_FIFO_RDY 0x200000 /* Receive Data Available */ - -/* Bit masks for SDH_STATUS_CLR */ - -#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */ -#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */ -#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */ -#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */ -#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */ -#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */ -#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */ -#define CMD_SENT_STAT 0x80 /* CMD Sent Status */ -#define DAT_END_STAT 0x100 /* Data End Status */ -#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */ -#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */ - -/* Bit masks for SDH_MASK0 */ - -#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */ -#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */ -#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */ -#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */ -#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */ -#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */ -#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */ -#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */ -#define DAT_END_MASK 0x100 /* Data End Mask */ -#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */ -#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */ -#define CMD_ACT_MASK 0x800 /* CMD Active Mask */ -#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */ -#define RX_ACT_MASK 0x2000 /* Receive Active Mask */ -#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */ -#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */ -#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */ -#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */ -#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */ -#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */ -#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */ -#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */ - -/* Bit masks for SDH_FIFO_CNT */ - -#define FIFO_COUNT 0x7fff /* FIFO Count */ - -/* Bit masks for SDH_E_STATUS */ - -#define SDIO_INT_DET 0x2 /* SDIO Int Detected */ -#define SD_CARD_DET 0x10 /* SD Card Detect */ - -/* Bit masks for SDH_E_MASK */ - -#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */ -#define SCD_MSK 0x40 /* Mask Card Detect */ - -/* Bit masks for SDH_CFG */ - -#define CLKS_EN 0x1 /* Clocks Enable */ -#define SD4E 0x4 /* SDIO 4-Bit Enable */ -#define MWE 0x8 /* Moving Window Enable */ -#define SD_RST 0x10 /* SDMMC Reset */ -#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */ -#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */ -#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */ - -/* Bit masks for SDH_RD_WAIT_EN */ - -#define RWR 0x1 /* Read Wait Request */ - -/* Bit masks for ATAPI_CONTROL */ - -#define PIO_START 0x1 /* Start PIO/Reg Op */ -#define MULTI_START 0x2 /* Start Multi-DMA Op */ -#define ULTRA_START 0x4 /* Start Ultra-DMA Op */ -#define XFER_DIR 0x8 /* Transfer Direction */ -#define IORDY_EN 0x10 /* IORDY Enable */ -#define FIFO_FLUSH 0x20 /* Flush FIFOs */ -#define SOFT_RST 0x40 /* Soft Reset */ -#define DEV_RST 0x80 /* Device Reset */ -#define TFRCNT_RST 0x100 /* Trans Count Reset */ -#define END_ON_TERM 0x200 /* End/Terminate Select */ -#define PIO_USE_DMA 0x400 /* PIO-DMA Enable */ -#define UDMAIN_FIFO_THRS 0xf000 /* Ultra DMA-IN FIFO Threshold */ - -/* Bit masks for ATAPI_STATUS */ - -#define PIO_XFER_ON 0x1 /* PIO transfer in progress */ -#define MULTI_XFER_ON 0x2 /* Multi-word DMA transfer in progress */ -#define ULTRA_XFER_ON 0x4 /* Ultra DMA transfer in progress */ -#define ULTRA_IN_FL 0xf0 /* Ultra DMA Input FIFO Level */ - -/* Bit masks for ATAPI_DEV_ADDR */ - -#define DEV_ADDR 0x1f /* Device Address */ - -/* Bit masks for ATAPI_INT_MASK */ - -#define ATAPI_DEV_INT_MASK 0x1 /* Device interrupt mask */ -#define PIO_DONE_MASK 0x2 /* PIO transfer done interrupt mask */ -#define MULTI_DONE_MASK 0x4 /* Multi-DMA transfer done interrupt mask */ -#define UDMAIN_DONE_MASK 0x8 /* Ultra-DMA in transfer done interrupt mask */ -#define UDMAOUT_DONE_MASK 0x10 /* Ultra-DMA out transfer done interrupt mask */ -#define HOST_TERM_XFER_MASK 0x20 /* Host terminate current transfer interrupt mask */ -#define MULTI_TERM_MASK 0x40 /* Device terminate Multi-DMA transfer interrupt mask */ -#define UDMAIN_TERM_MASK 0x80 /* Device terminate Ultra-DMA-in transfer interrupt mask */ -#define UDMAOUT_TERM_MASK 0x100 /* Device terminate Ultra-DMA-out transfer interrupt mask */ - -/* Bit masks for ATAPI_INT_STATUS */ - -#define ATAPI_DEV_INT 0x1 /* Device interrupt status */ -#define PIO_DONE_INT 0x2 /* PIO transfer done interrupt status */ -#define MULTI_DONE_INT 0x4 /* Multi-DMA transfer done interrupt status */ -#define UDMAIN_DONE_INT 0x8 /* Ultra-DMA in transfer done interrupt status */ -#define UDMAOUT_DONE_INT 0x10 /* Ultra-DMA out transfer done interrupt status */ -#define HOST_TERM_XFER_INT 0x20 /* Host terminate current transfer interrupt status */ -#define MULTI_TERM_INT 0x40 /* Device terminate Multi-DMA transfer interrupt status */ -#define UDMAIN_TERM_INT 0x80 /* Device terminate Ultra-DMA-in transfer interrupt status */ -#define UDMAOUT_TERM_INT 0x100 /* Device terminate Ultra-DMA-out transfer interrupt status */ - -/* Bit masks for ATAPI_LINE_STATUS */ - -#define ATAPI_INTR 0x1 /* Device interrupt to host line status */ -#define ATAPI_DASP 0x2 /* Device dasp to host line status */ -#define ATAPI_CS0N 0x4 /* ATAPI chip select 0 line status */ -#define ATAPI_CS1N 0x8 /* ATAPI chip select 1 line status */ -#define ATAPI_ADDR 0x70 /* ATAPI address line status */ -#define ATAPI_DMAREQ 0x80 /* ATAPI DMA request line status */ -#define ATAPI_DMAACKN 0x100 /* ATAPI DMA acknowledge line status */ -#define ATAPI_DIOWN 0x200 /* ATAPI write line status */ -#define ATAPI_DIORN 0x400 /* ATAPI read line status */ -#define ATAPI_IORDY 0x800 /* ATAPI IORDY line status */ - -/* Bit masks for ATAPI_SM_STATE */ - -#define PIO_CSTATE 0xf /* PIO mode state machine current state */ -#define DMA_CSTATE 0xf0 /* DMA mode state machine current state */ -#define UDMAIN_CSTATE 0xf00 /* Ultra DMA-In mode state machine current state */ -#define UDMAOUT_CSTATE 0xf000 /* ATAPI IORDY line status */ - -/* Bit masks for ATAPI_TERMINATE */ - -#define ATAPI_HOST_TERM 0x1 /* Host terminationation */ - -/* Bit masks for ATAPI_REG_TIM_0 */ - -#define T2_REG 0xff /* End of cycle time for register access transfers */ -#define TEOC_REG 0xff00 /* Selects DIOR/DIOW pulsewidth */ - -/* Bit masks for ATAPI_PIO_TIM_0 */ - -#define T1_REG 0xf /* Time from address valid to DIOR/DIOW */ -#define T2_REG_PIO 0xff0 /* DIOR/DIOW pulsewidth */ -#define T4_REG 0xf000 /* DIOW data hold */ - -/* Bit masks for ATAPI_PIO_TIM_1 */ - -#define TEOC_REG_PIO 0xff /* End of cycle time for PIO access transfers. */ - -/* Bit masks for ATAPI_MULTI_TIM_0 */ - -#define TD 0xff /* DIOR/DIOW asserted pulsewidth */ -#define TM 0xff00 /* Time from address valid to DIOR/DIOW */ - -/* Bit masks for ATAPI_MULTI_TIM_1 */ - -#define TKW 0xff /* Selects DIOW negated pulsewidth */ -#define TKR 0xff00 /* Selects DIOR negated pulsewidth */ - -/* Bit masks for ATAPI_MULTI_TIM_2 */ - -#define TH 0xff /* Selects DIOW data hold */ -#define TEOC 0xff00 /* Selects end of cycle for DMA */ - -/* Bit masks for ATAPI_ULTRA_TIM_0 */ - -#define TACK 0xff /* Selects setup and hold times for TACK */ -#define TENV 0xff00 /* Selects envelope time */ - -/* Bit masks for ATAPI_ULTRA_TIM_1 */ - -#define TDVS 0xff /* Selects data valid setup time */ -#define TCYC_TDVS 0xff00 /* Selects cycle time - TDVS time */ - -/* Bit masks for ATAPI_ULTRA_TIM_2 */ - -#define TSS 0xff /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */ -#define TMLI 0xff00 /* Selects interlock time */ - -/* Bit masks for ATAPI_ULTRA_TIM_3 */ - -#define TZAH 0xff /* Selects minimum delay required for output */ -#define READY_PAUSE 0xff00 /* Selects ready to pause */ - -/* Bit masks for TIMER_ENABLE1 */ - -#define TIMEN8 0x1 /* Timer 8 Enable */ -#define TIMEN9 0x2 /* Timer 9 Enable */ -#define TIMEN10 0x4 /* Timer 10 Enable */ - -/* Bit masks for TIMER_DISABLE1 */ - -#define TIMDIS8 0x1 /* Timer 8 Disable */ -#define TIMDIS9 0x2 /* Timer 9 Disable */ -#define TIMDIS10 0x4 /* Timer 10 Disable */ - -/* Bit masks for TIMER_STATUS1 */ - -#define TIMIL8 0x1 /* Timer 8 Interrupt */ -#define TIMIL9 0x2 /* Timer 9 Interrupt */ -#define TIMIL10 0x4 /* Timer 10 Interrupt */ -#define TOVF_ERR8 0x10 /* Timer 8 Counter Overflow */ -#define TOVF_ERR9 0x20 /* Timer 9 Counter Overflow */ -#define TOVF_ERR10 0x40 /* Timer 10 Counter Overflow */ -#define TRUN8 0x1000 /* Timer 8 Slave Enable Status */ -#define TRUN9 0x2000 /* Timer 9 Slave Enable Status */ -#define TRUN10 0x4000 /* Timer 10 Slave Enable Status */ - -/* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */ - -/* Bit masks for USB_FADDR */ - -#define FUNCTION_ADDRESS 0x7f /* Function address */ - -/* Bit masks for USB_POWER */ - -#define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */ -#define SUSPEND_MODE 0x2 /* Suspend Mode indicator */ -#define RESUME_MODE 0x4 /* DMA Mode */ -#define RESET 0x8 /* Reset indicator */ -#define HS_MODE 0x10 /* High Speed mode indicator */ -#define HS_ENABLE 0x20 /* high Speed Enable */ -#define SOFT_CONN 0x40 /* Soft connect */ -#define ISO_UPDATE 0x80 /* Isochronous update */ - -/* Bit masks for USB_INTRTX */ - -#define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */ -#define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */ -#define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */ -#define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */ -#define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */ -#define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */ -#define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */ -#define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */ - -/* Bit masks for USB_INTRRX */ - -#define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */ -#define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */ -#define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */ -#define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */ -#define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */ -#define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */ -#define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */ - -/* Bit masks for USB_INTRTXE */ - -#define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */ -#define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */ -#define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */ -#define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */ -#define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */ -#define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */ -#define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */ -#define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */ - -/* Bit masks for USB_INTRRXE */ - -#define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */ -#define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */ -#define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */ -#define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */ -#define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */ -#define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */ -#define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */ - -/* Bit masks for USB_INTRUSB */ - -#define SUSPEND_B 0x1 /* Suspend indicator */ -#define RESUME_B 0x2 /* Resume indicator */ -#define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */ -#define SOF_B 0x8 /* Start of frame */ -#define CONN_B 0x10 /* Connection indicator */ -#define DISCON_B 0x20 /* Disconnect indicator */ -#define SESSION_REQ_B 0x40 /* Session Request */ -#define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */ - -/* Bit masks for USB_INTRUSBE */ - -#define SUSPEND_BE 0x1 /* Suspend indicator int enable */ -#define RESUME_BE 0x2 /* Resume indicator int enable */ -#define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */ -#define SOF_BE 0x8 /* Start of frame int enable */ -#define CONN_BE 0x10 /* Connection indicator int enable */ -#define DISCON_BE 0x20 /* Disconnect indicator int enable */ -#define SESSION_REQ_BE 0x40 /* Session Request int enable */ -#define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */ - -/* Bit masks for USB_FRAME */ - -#define FRAME_NUMBER 0x7ff /* Frame number */ - -/* Bit masks for USB_INDEX */ - -#define SELECTED_ENDPOINT 0xf /* selected endpoint */ - -/* Bit masks for USB_GLOBAL_CTL */ - -#define GLOBAL_ENA 0x1 /* enables USB module */ -#define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */ -#define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */ -#define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */ -#define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */ -#define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */ -#define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */ -#define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */ -#define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */ -#define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */ -#define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */ -#define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */ -#define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */ -#define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */ -#define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */ - -/* Bit masks for USB_OTG_DEV_CTL */ - -#define SESSION 0x1 /* session indicator */ -#define HOST_REQ 0x2 /* Host negotiation request */ -#define HOST_MODE 0x4 /* indicates USBDRC is a host */ -#define VBUS0 0x8 /* Vbus level indicator[0] */ -#define VBUS1 0x10 /* Vbus level indicator[1] */ -#define LSDEV 0x20 /* Low-speed indicator */ -#define FSDEV 0x40 /* Full or High-speed indicator */ -#define B_DEVICE 0x80 /* A' or 'B' device indicator */ - -/* Bit masks for USB_OTG_VBUS_IRQ */ - -#define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */ -#define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */ -#define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */ -#define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */ -#define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */ -#define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */ - -/* Bit masks for USB_OTG_VBUS_MASK */ - -#define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */ -#define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */ -#define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */ -#define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */ -#define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */ -#define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */ - -/* Bit masks for USB_CSR0 */ - -#define RXPKTRDY 0x1 /* data packet receive indicator */ -#define TXPKTRDY 0x2 /* data packet in FIFO indicator */ -#define STALL_SENT 0x4 /* STALL handshake sent */ -#define DATAEND 0x8 /* Data end indicator */ -#define SETUPEND 0x10 /* Setup end */ -#define SENDSTALL 0x20 /* Send STALL handshake */ -#define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */ -#define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */ -#define FLUSHFIFO 0x100 /* flush endpoint FIFO */ -#define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */ -#define SETUPPKT_H 0x8 /* send Setup token host mode */ -#define ERROR_H 0x10 /* timeout error indicator host mode */ -#define REQPKT_H 0x20 /* Request an IN transaction host mode */ -#define STATUSPKT_H 0x40 /* Status stage transaction host mode */ -#define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */ - -/* Bit masks for USB_COUNT0 */ - -#define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */ - -/* Bit masks for USB_NAKLIMIT0 */ - -#define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */ - -/* Bit masks for USB_TX_MAX_PACKET */ - -#define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */ - -/* Bit masks for USB_RX_MAX_PACKET */ - -#define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */ - -/* Bit masks for USB_TXCSR */ - -#define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */ -#define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */ -#define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */ -#define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */ -#define STALL_SEND_T 0x10 /* issue a Stall handshake */ -#define STALL_SENT_T 0x20 /* Stall handshake transmitted */ -#define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */ -#define INCOMPTX_T 0x80 /* indicates that a large packet is split */ -#define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */ -#define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */ -#define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */ -#define ISO_T 0x4000 /* enable Isochronous transfers */ -#define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */ -#define ERROR_TH 0x4 /* error condition host mode */ -#define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */ -#define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */ - -/* Bit masks for USB_TXCOUNT */ - -#define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */ - -/* Bit masks for USB_RXCSR */ - -#define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */ -#define FIFO_FULL_R 0x2 /* FIFO not empty */ -#define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */ -#define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */ -#define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */ -#define STALL_SEND_R 0x20 /* issue a Stall handshake */ -#define STALL_SENT_R 0x40 /* Stall handshake transmitted */ -#define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */ -#define INCOMPRX_R 0x100 /* indicates that a large packet is split */ -#define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */ -#define DISNYET_R 0x1000 /* disable Nyet handshakes */ -#define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */ -#define ISO_R 0x4000 /* enable Isochronous transfers */ -#define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */ -#define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */ -#define REQPKT_RH 0x20 /* request an IN transaction host mode */ -#define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */ -#define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */ -#define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */ -#define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */ - -/* Bit masks for USB_RXCOUNT */ - -#define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */ - -/* Bit masks for USB_TXTYPE */ - -#define TARGET_EP_NO_T 0xf /* EP number */ -#define PROTOCOL_T 0xc /* transfer type */ - -/* Bit masks for USB_TXINTERVAL */ - -#define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */ - -/* Bit masks for USB_RXTYPE */ - -#define TARGET_EP_NO_R 0xf /* EP number */ -#define PROTOCOL_R 0xc /* transfer type */ - -/* Bit masks for USB_RXINTERVAL */ - -#define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */ - -/* Bit masks for USB_DMA_INTERRUPT */ - -#define DMA0_INT 0x1 /* DMA0 pending interrupt */ -#define DMA1_INT 0x2 /* DMA1 pending interrupt */ -#define DMA2_INT 0x4 /* DMA2 pending interrupt */ -#define DMA3_INT 0x8 /* DMA3 pending interrupt */ -#define DMA4_INT 0x10 /* DMA4 pending interrupt */ -#define DMA5_INT 0x20 /* DMA5 pending interrupt */ -#define DMA6_INT 0x40 /* DMA6 pending interrupt */ -#define DMA7_INT 0x80 /* DMA7 pending interrupt */ - -/* Bit masks for USB_DMAxCONTROL */ - -#define DMA_ENA 0x1 /* DMA enable */ -#define DIRECTION 0x2 /* direction of DMA transfer */ -#define MODE 0x4 /* DMA Bus error */ -#define INT_ENA 0x8 /* Interrupt enable */ -#define EPNUM 0xf0 /* EP number */ -#define BUSERROR 0x100 /* DMA Bus error */ - -/* Bit masks for USB_DMAxADDRHIGH */ - -#define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */ - -/* Bit masks for USB_DMAxADDRLOW */ - -#define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */ - -/* Bit masks for USB_DMAxCOUNTHIGH */ - -#define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */ - -/* Bit masks for USB_DMAxCOUNTLOW */ - -#define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */ - -/* Bit masks for HMDMAx_CONTROL */ - -#define HMDMAEN 0x1 /* Handshake MDMA Enable */ -#define REP 0x2 /* Handshake MDMA Request Polarity */ -#define UTE 0x8 /* Urgency Threshold Enable */ -#define OIE 0x10 /* Overflow Interrupt Enable */ -#define BDIE 0x20 /* Block Done Interrupt Enable */ -#define MBDI 0x40 /* Mask Block Done Interrupt */ -#define DRQ 0x300 /* Handshake MDMA Request Type */ -#define RBC 0x1000 /* Force Reload of BCOUNT */ -#define PS 0x2000 /* Pin Status */ -#define OI 0x4000 /* Overflow Interrupt Generated */ -#define BDI 0x8000 /* Block Done Interrupt Generated */ - -/* ******************************************* */ -/* MULTI BIT MACRO ENUMERATIONS */ -/* ******************************************* */ - -/* ************************ */ -/* MXVR Address Offsets */ -/* ************************ */ - -/* Control Message Receive Buffer (CMRB) Address Offsets */ - -#define CMRB_STRIDE 0x00000016lu - -#define CMRB_DST_OFFSET 0x00000000lu -#define CMRB_SRC_OFFSET 0x00000002lu -#define CMRB_DATA_OFFSET 0x00000005lu - -/* Control Message Transmit Buffer (CMTB) Address Offsets */ - -#define CMTB_PRIO_OFFSET 0x00000000lu -#define CMTB_DST_OFFSET 0x00000002lu -#define CMTB_SRC_OFFSET 0x00000004lu -#define CMTB_TYPE_OFFSET 0x00000006lu -#define CMTB_DATA_OFFSET 0x00000007lu - -#define CMTB_ANSWER_OFFSET 0x0000000Alu - -#define CMTB_STAT_N_OFFSET 0x00000018lu -#define CMTB_STAT_A_OFFSET 0x00000016lu -#define CMTB_STAT_D_OFFSET 0x0000000Elu -#define CMTB_STAT_R_OFFSET 0x00000014lu -#define CMTB_STAT_W_OFFSET 0x00000014lu -#define CMTB_STAT_G_OFFSET 0x00000014lu - -/* Asynchronous Packet Receive Buffer (APRB) Address Offsets */ - -#define APRB_STRIDE 0x00000400lu - -#define APRB_DST_OFFSET 0x00000000lu -#define APRB_LEN_OFFSET 0x00000002lu -#define APRB_SRC_OFFSET 0x00000004lu -#define APRB_DATA_OFFSET 0x00000006lu - -/* Asynchronous Packet Transmit Buffer (APTB) Address Offsets */ - -#define APTB_PRIO_OFFSET 0x00000000lu -#define APTB_DST_OFFSET 0x00000002lu -#define APTB_LEN_OFFSET 0x00000004lu -#define APTB_SRC_OFFSET 0x00000006lu -#define APTB_DATA_OFFSET 0x00000008lu - -/* Remote Read Buffer (RRDB) Address Offsets */ - -#define RRDB_WADDR_OFFSET 0x00000100lu -#define RRDB_WLEN_OFFSET 0x00000101lu - -/* **************** */ -/* MXVR Macros */ -/* **************** */ - -/* MXVR_CONFIG Macros */ - -#define SET_MSB(x) ( ( (x) & 0xF ) << 9) - -/* MXVR_INT_STAT_1 Macros */ - -#define DONEX(x) (0x00000002 << (4 * (x))) -#define HDONEX(x) (0x00000001 << (4 * (x))) - -/* MXVR_INT_EN_1 Macros */ - -#define DONEENX(x) (0x00000002 << (4 * (x))) -#define HDONEENX(x) (0x00000001 << (4 * (x))) - -/* MXVR_CDRPLL_CTL Macros */ - -#define SET_CDRSHPSEL(x) ( ( (x) & 0x3F ) << 16) - -/* MXVR_FMPLL_CTL Macros */ - -#define SET_CDRCPSEL(x) ( ( (x) & 0xFF ) << 24) -#define SET_FMCPSEL(x) ( ( (x) & 0xFF ) << 24) - #endif /* _DEF_BF549_H */ diff --git a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h index 8590c8c..ab04d13 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h @@ -1609,44 +1609,6 @@ #define PINT2 0x40000000 /* Pin Interrupt 2 */ #define PINT3 0x80000000 /* Pin Interrupt 3 */ -/* Bit masks for DMAx_CONFIG, MDMA_Sx_CONFIG, MDMA_Dx_CONFIG */ - -#define DMAEN 0x1 /* DMA Channel Enable */ -#define WNR 0x2 /* DMA Direction */ -#define WDSIZE_8 0x0 /* Transfer Word Size = 8 */ -#define WDSIZE_16 0x4 /* Transfer Word Size = 16 */ -#define WDSIZE_32 0x8 /* Transfer Word Size = 32 */ -#define DMA2D 0x10 /* DMA Mode */ -#define RESTART 0x20 /* Work Unit Transitions */ -#define DI_SEL 0x40 /* Data Interrupt Timing Select */ -#define DI_EN 0x80 /* Data Interrupt Enable */ - -#define NDSIZE 0xf00 /* Flex Descriptor Size */ -#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ -#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ -#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ -#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ -#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ -#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ -#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ -#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ -#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ -#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ - -#define DMAFLOW 0xf000 /* Next Operation */ -#define DMAFLOW_STOP 0x0000 /* Stop Mode */ -#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ -#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ -#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ -#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ - -/* Bit masks for DMAx_IRQ_STATUS, MDMA_Sx_IRQ_STATUS, MDMA_Dx_IRQ_STATUS */ - -#define DMA_DONE 0x1 /* DMA Completion Interrupt Status */ -#define DMA_ERR 0x2 /* DMA Error Interrupt Status */ -#define DFETCH 0x4 /* DMA Descriptor Fetch */ -#define DMA_RUN 0x8 /* DMA Channel Running */ - /* Bit masks for DMAx_PERIPHERAL_MAP, MDMA_Sx_IRQ_STATUS, MDMA_Dx_IRQ_STATUS */ #define CTYPE 0x40 /* DMA Channel Type */ @@ -1815,10 +1777,6 @@ #define DEB3_MERROR 0x40 /* DEB3 Error (2nd) */ #define CORE_MERROR 0x80 /* Core Error (2nd) */ -/* Bit masks for EBIU_ERRADD */ - -#define ERROR_ADDRESS 0xffffffff /* Error Address */ - /* Bit masks for EBIU_RSTCTL */ #define DDRSRESET 0x1 /* DDR soft reset */ @@ -1827,98 +1785,6 @@ #define SRACK 0x10 /* Self-refresh acknowledge */ #define MDDRENABLE 0x20 /* Mobile DDR enable */ -/* Bit masks for EBIU_DDRBRC0 */ - -#define BRC0 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBRC1 */ - -#define BRC1 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBRC2 */ - -#define BRC2 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBRC3 */ - -#define BRC3 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBRC4 */ - -#define BRC4 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBRC5 */ - -#define BRC5 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBRC6 */ - -#define BRC6 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBRC7 */ - -#define BRC7 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBWC0 */ - -#define BWC0 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBWC1 */ - -#define BWC1 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBWC2 */ - -#define BWC2 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBWC3 */ - -#define BWC3 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBWC4 */ - -#define BWC4 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBWC5 */ - -#define BWC5 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBWC6 */ - -#define BWC6 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRBWC7 */ - -#define BWC7 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRACCT */ - -#define ACCT 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRTACT */ - -#define TECT 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRARCT */ - -#define ARCT 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRGC0 */ - -#define GC0 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRGC1 */ - -#define GC1 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRGC2 */ - -#define GC2 0xffffffff /* Count */ - -/* Bit masks for EBIU_DDRGC3 */ - -#define GC3 0xffffffff /* Count */ - /* Bit masks for EBIU_DDRMCEN */ #define B0WCENABLE 0x1 /* Bank 0 write count enable */ @@ -2092,12 +1958,6 @@ #define TRUN6 0x40000000 /* Timer 6 Slave Enable Status */ #define TRUN7 0x80000000 /* Timer 7 Slave Enable Status */ -/* Bit masks for WDOG_CTL */ - -#define WDEV 0x6 /* Watchdog Event */ -#define WDEN 0xff0 /* Watchdog Enable */ -#define WDRO 0x8000 /* Watchdog Rolled Over */ - /* Bit masks for CNT_CONFIG */ #define CNTE 0x1 /* Counter Enable */ @@ -2149,81 +2009,6 @@ #define DPRESCALE 0xf /* Load Counter Register */ -/* Bit masks for RTC_STAT */ - -#define SECONDS 0x3f /* Seconds */ -#define MINUTES 0xfc0 /* Minutes */ -#define HOURS 0x1f000 /* Hours */ -#define DAY_COUNTER 0xfffe0000 /* Day Counter */ - -/* Bit masks for RTC_ICTL */ - -#define STOPWATCH_INTERRUPT_ENABLE 0x1 /* Stopwatch Interrupt Enable */ -#define ALARM_INTERRUPT_ENABLE 0x2 /* Alarm Interrupt Enable */ -#define SECONDS_INTERRUPT_ENABLE 0x4 /* Seconds Interrupt Enable */ -#define MINUTES_INTERRUPT_ENABLE 0x8 /* Minutes Interrupt Enable */ -#define HOURS_INTERRUPT_ENABLE 0x10 /* Hours Interrupt Enable */ -#define TWENTY_FOUR_HOURS_INTERRUPT_ENABLE 0x20 /* 24 Hours Interrupt Enable */ -#define DAY_ALARM_INTERRUPT_ENABLE 0x40 /* Day Alarm Interrupt Enable */ -#define WRITE_COMPLETE_INTERRUPT_ENABLE 0x8000 /* Write Complete Interrupt Enable */ - -/* Bit masks for RTC_ISTAT */ - -#define STOPWATCH_EVENT_FLAG 0x1 /* Stopwatch Event Flag */ -#define ALARM_EVENT_FLAG 0x2 /* Alarm Event Flag */ -#define SECONDS_EVENT_FLAG 0x4 /* Seconds Event Flag */ -#define MINUTES_EVENT_FLAG 0x8 /* Minutes Event Flag */ -#define HOURS_EVENT_FLAG 0x10 /* Hours Event Flag */ -#define TWENTY_FOUR_HOURS_EVENT_FLAG 0x20 /* 24 Hours Event Flag */ -#define DAY_ALARM_EVENT_FLAG 0x40 /* Day Alarm Event Flag */ -#define WRITE_PENDING__STATUS 0x4000 /* Write Pending Status */ -#define WRITE_COMPLETE 0x8000 /* Write Complete */ - -/* Bit masks for RTC_SWCNT */ - -#define STOPWATCH_COUNT 0xffff /* Stopwatch Count */ - -/* Bit masks for RTC_ALARM */ - -#define SECONDS 0x3f /* Seconds */ -#define MINUTES 0xfc0 /* Minutes */ -#define HOURS 0x1f000 /* Hours */ -#define DAY 0xfffe0000 /* Day */ - -/* Bit masks for RTC_PREN */ - -#define PREN 0x1 /* Prescaler Enable */ - -/* Bit masks for OTP_CONTROL */ - -#define FUSE_FADDR 0x1ff /* OTP/Fuse Address */ -#define FIEN 0x800 /* OTP/Fuse Interrupt Enable */ -#define FTESTDEC 0x1000 /* OTP/Fuse Test Decoder */ -#define FWRTEST 0x2000 /* OTP/Fuse Write Test */ -#define FRDEN 0x4000 /* OTP/Fuse Read Enable */ -#define FWREN 0x8000 /* OTP/Fuse Write Enable */ - -/* Bit masks for OTP_BEN */ - -#define FBEN 0xffff /* OTP/Fuse Byte Enable */ - -/* Bit masks for OTP_STATUS */ - -#define FCOMP 0x1 /* OTP/Fuse Access Complete */ -#define FERROR 0x2 /* OTP/Fuse Access Error */ -#define MMRGLOAD 0x10 /* Memory Mapped Register Gasket Load */ -#define MMRGLOCK 0x20 /* Memory Mapped Register Gasket Lock */ -#define FPGMEN 0x40 /* OTP/Fuse Program Enable */ - -/* Bit masks for OTP_TIMING */ - -#define USECDIV 0xff /* Micro Second Divider */ -#define READACC 0x7f00 /* Read Access Time */ -#define CPUMPRL 0x38000 /* Charge Pump Release Time */ -#define CPUMPSU 0xc0000 /* Charge Pump Setup Time */ -#define CPUMPHD 0xf00000 /* Charge Pump Hold Time */ -#define PGMTIME 0xff000000 /* Program Time */ - /* Bit masks for SECURE_SYSSWT */ #define EMUDABL 0x1 /* Emulation Disable. */ @@ -2252,26 +2037,6 @@ #define AFEXIT 0x10 /* Authentication Firmware Exit */ #define SECSTAT 0xe0 /* Secure Status */ -/* Bit masks for PLL_DIV */ - -#define CSEL 0x30 /* Core Select */ -#define SSEL 0xf /* System Select */ -#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */ -#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */ -#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */ -#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */ - -/* Bit masks for PLL_CTL */ - -#define MSEL 0x7e00 /* Multiplier Select */ -#define BYPASS 0x100 /* PLL Bypass Enable */ -#define OUTPUT_DELAY 0x80 /* External Memory Output Delay Enable */ -#define INPUT_DELAY 0x40 /* External Memory Input Delay Enable */ -#define PDWN 0x20 /* Power Down */ -#define STOPCK 0x8 /* Stop Clock */ -#define PLL_OFF 0x2 /* Disable PLL */ -#define DF 0x1 /* Divide Frequency */ - /* SWRST Masks */ #define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */ #define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */ @@ -2279,52 +2044,6 @@ #define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */ #define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */ -/* Bit masks for PLL_STAT */ - -#define PLL_LOCKED 0x20 /* PLL Locked Status */ -#define ACTIVE_PLLDISABLED 0x4 /* Active Mode With PLL Disabled */ -#define FULL_ON 0x2 /* Full-On Mode */ -#define ACTIVE_PLLENABLED 0x1 /* Active Mode With PLL Enabled */ -#define RTCWS 0x400 /* RTC/Reset Wake-Up Status */ -#define CANWS 0x800 /* CAN Wake-Up Status */ -#define USBWS 0x2000 /* USB Wake-Up Status */ -#define KPADWS 0x4000 /* Keypad Wake-Up Status */ -#define ROTWS 0x8000 /* Rotary Wake-Up Status */ -#define GPWS 0x1000 /* General-Purpose Wake-Up Status */ - -/* Bit masks for VR_CTL */ - -#define FREQ 0x3 /* Regulator Switching Frequency */ -#define GAIN 0xc /* Voltage Output Level Gain */ -#define VLEV 0xf0 /* Internal Voltage Level */ -#define SCKELOW 0x8000 /* Drive SCKE Low During Reset Enable */ -#define WAKE 0x100 /* RTC/Reset Wake-Up Enable */ -#define CANWE 0x200 /* CAN0/1 Wake-Up Enable */ -#define GPWE 0x400 /* General-Purpose Wake-Up Enable */ -#define USBWE 0x800 /* USB Wake-Up Enable */ -#define KPADWE 0x1000 /* Keypad Wake-Up Enable */ -#define ROTWE 0x2000 /* Rotary Wake-Up Enable */ - -#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */ -#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */ -#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */ - -#define GAIN_5 0x0000 /* GAIN = 5*/ -#define GAIN_10 0x0004 /* GAIN = 1*/ -#define GAIN_20 0x0008 /* GAIN = 2*/ -#define GAIN_50 0x000C /* GAIN = 5*/ - -#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ -#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ -#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ -#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ -#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ -#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ -#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ -#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ -#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */ -#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ - /* Bit masks for NFC_CTL */ #define WR_DLY 0xf /* Write Strobe Delay */ @@ -2489,14 +2208,6 @@ #define UCCT 0x40 /* Universal Counter CAN Trigger */ #define UCE 0x80 /* Universal Counter Enable */ -/* Bit masks for CAN0_UCCNT */ - -#define UCCNT 0xffff /* Universal Counter Count Value */ - -/* Bit masks for CAN0_UCRC */ - -#define UCVAL 0xffff /* Universal Counter Reload/Capture Value */ - /* Bit masks for CAN0_CEC */ #define RXECNT 0xff /* Receive Error Counter */ diff --git a/arch/blackfin/mach-bf561/boards/Kconfig b/arch/blackfin/mach-bf561/boards/Kconfig index e4bc6d7..1aa529b 100644 --- a/arch/blackfin/mach-bf561/boards/Kconfig +++ b/arch/blackfin/mach-bf561/boards/Kconfig @@ -19,4 +19,11 @@ config BFIN561_BLUETECHNIX_CM help CM-BF561 support for EVAL- and DEV-Board. +config BFIN561_ACVILON + bool "BF561-ACVILON" + help + BF561-ACVILON System On Module support (SO-DIMM 144). + For more information about Acvilon BF561 SoM + please go to http://www.niistt.ru/ + endchoice diff --git a/arch/blackfin/mach-bf561/boards/Makefile b/arch/blackfin/mach-bf561/boards/Makefile index 3a15255..a5879f7 100644 --- a/arch/blackfin/mach-bf561/boards/Makefile +++ b/arch/blackfin/mach-bf561/boards/Makefile @@ -2,6 +2,7 @@ # arch/blackfin/mach-bf561/boards/Makefile # +obj-$(CONFIG_BFIN561_ACVILON) += acvilon.o obj-$(CONFIG_BFIN561_BLUETECHNIX_CM) += cm_bf561.o obj-$(CONFIG_BFIN561_EZKIT) += ezkit.o obj-$(CONFIG_BFIN561_TEPLA) += tepla.o diff --git a/arch/blackfin/mach-bf561/boards/acvilon.c b/arch/blackfin/mach-bf561/boards/acvilon.c new file mode 100644 index 0000000..07e8dc8 --- /dev/null +++ b/arch/blackfin/mach-bf561/boards/acvilon.c @@ -0,0 +1,551 @@ +/* + * File: arch/blackfin/mach-bf561/acvilon.c + * Based on: arch/blackfin/mach-bf561/ezkit.c + * Author: + * + * Created: + * Description: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * Copyright 2009 CJSC "NII STT" + * + * Bugs: + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * + * For more information about Acvilon BF561 SoM please + * go to http://www.niistt.ru/ + * + */ + +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/plat-ram.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/i2c-pca-platform.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <asm/dma.h> +#include <asm/bfin5xx_spi.h> +#include <asm/portmux.h> +#include <asm/dpmc.h> +#include <asm/cacheflush.h> +#include <linux/i2c.h> + +/* + * Name the Board for the /proc/cpuinfo + */ +const char bfin_board_name[] = "Acvilon board"; + +#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#include <linux/usb/isp1760.h> +static struct resource bfin_isp1760_resources[] = { + [0] = { + .start = 0x20000000, + .end = 0x20000000 + 0x000fffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_PF15, + .end = IRQ_PF15, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; + +static struct isp1760_platform_data isp1760_priv = { + .is_isp1761 = 0, + .port1_disable = 0, + .bus_width_16 = 1, + .port1_otg = 0, + .analog_oc = 0, + .dack_polarity_high = 0, + .dreq_polarity_high = 0, +}; + +static struct platform_device bfin_isp1760_device = { + .name = "isp1760-hcd", + .id = 0, + .dev = { + .platform_data = &isp1760_priv, + }, + .num_resources = ARRAY_SIZE(bfin_isp1760_resources), + .resource = bfin_isp1760_resources, +}; +#endif + +static struct resource bfin_i2c_pca_resources[] = { + { + .name = "pca9564-regs", + .start = 0x2C000000, + .end = 0x2C000000 + 16, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT, + }, { + + .start = IRQ_PF8, + .end = IRQ_PF8, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; + +struct i2c_pca9564_pf_platform_data pca9564_platform_data = { + .gpio = -1, + .i2c_clock_speed = 330000, + .timeout = 10000 +}; + +/* PCA9564 I2C Bus driver */ +static struct platform_device bfin_i2c_pca_device = { + .name = "i2c-pca-platform", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_i2c_pca_resources), + .resource = bfin_i2c_pca_resources, + .dev = { + .platform_data = &pca9564_platform_data, + } +}; + +/* I2C devices fitted. */ +static struct i2c_board_info acvilon_i2c_devs[] __initdata = { + { + I2C_BOARD_INFO("ds1339", 0x68), + }, + { + I2C_BOARD_INFO("tcn75", 0x49), + }, +}; + +#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE) +static struct platdata_mtd_ram mtd_ram_data = { + .mapname = "rootfs(RAM)", + .bankwidth = 4, +}; + +static struct resource mtd_ram_resource = { + .start = 0x4000000, + .end = 0x5ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device mtd_ram_device = { + .name = "mtd-ram", + .id = 0, + .dev = { + .platform_data = &mtd_ram_data, + }, + .num_resources = 1, + .resource = &mtd_ram_resource, +}; +#endif + +#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#include <linux/smsc911x.h> +static struct resource smsc911x_resources[] = { + { + .name = "smsc911x-memory", + .start = 0x28000000, + .end = 0x28000000 + 0xFF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PF7, + .end = IRQ_PF7, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; + +static struct smsc911x_platform_config smsc911x_config = { + .flags = SMSC911X_USE_32BIT, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .phy_interface = PHY_INTERFACE_MODE_MII, +}; + +static struct platform_device smsc911x_device = { + .name = "smsc911x", + .id = 0, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, + .dev = { + .platform_data = &smsc911x_config, + }, +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#ifdef CONFIG_SERIAL_BFIN_UART0 +static struct resource bfin_uart0_resources[] = { + { + .start = BFIN_UART_THR, + .end = BFIN_UART_GCTL + 2, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_UART_RX, + .end = IRQ_UART_RX + 1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART_ERROR, + .end = IRQ_UART_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART_TX, + .end = CH_UART_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART_RX, + .end = CH_UART_RX, + .flags = IORESOURCE_DMA, + }, +}; + +unsigned short bfin_uart0_peripherals[] = { + P_UART0_TX, P_UART0_RX, 0 +}; + +static struct platform_device bfin_uart0_device = { + .name = "bfin-uart", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_uart0_resources), + .resource = bfin_uart0_resources, + .dev = { + /* Passed to driver */ + .platform_data = &bfin_uart0_peripherals, + }, +}; +#endif +#endif + +#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) + +#ifdef CONFIG_MTD_PARTITIONS +const char *part_probes[] = { "cmdlinepart", NULL }; + +static struct mtd_partition bfin_plat_nand_partitions[] = { + { + .name = "params(nand)", + .size = 32 * 1024 * 1024, + .offset = 0, + }, { + .name = "userfs(nand)", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + }, +}; +#endif + +#define BFIN_NAND_PLAT_CLE 2 +#define BFIN_NAND_PLAT_ALE 3 + +static void bfin_plat_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + + if (cmd == NAND_CMD_NONE) + return; + + if (ctrl & NAND_CLE) + writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_CLE)); + else + writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_ALE)); +} + +#define BFIN_NAND_PLAT_READY GPIO_PF10 +static int bfin_plat_nand_dev_ready(struct mtd_info *mtd) +{ + return gpio_get_value(BFIN_NAND_PLAT_READY); +} + +static struct platform_nand_data bfin_plat_nand_data = { + .chip = { + .chip_delay = 30, +#ifdef CONFIG_MTD_PARTITIONS + .part_probe_types = part_probes, + .partitions = bfin_plat_nand_partitions, + .nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions), +#endif + }, + .ctrl = { + .cmd_ctrl = bfin_plat_nand_cmd_ctrl, + .dev_ready = bfin_plat_nand_dev_ready, + }, +}; + +#define MAX(x, y) (x > y ? x : y) +static struct resource bfin_plat_nand_resources = { + .start = 0x24000000, + .end = 0x24000000 + (1 << MAX(BFIN_NAND_PLAT_CLE, BFIN_NAND_PLAT_ALE)), + .flags = IORESOURCE_IO, +}; + +static struct platform_device bfin_async_nand_device = { + .name = "gen_nand", + .id = -1, + .num_resources = 1, + .resource = &bfin_plat_nand_resources, + .dev = { + .platform_data = &bfin_plat_nand_data, + }, +}; + +static void bfin_plat_nand_init(void) +{ + gpio_request(BFIN_NAND_PLAT_READY, "bfin_nand_plat"); +} +#else +static void bfin_plat_nand_init(void) +{ +} +#endif + +#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE) +static struct mtd_partition bfin_spi_dataflash_partitions[] = { + { + .name = "bootloader", + .size = 0x4200, + .offset = 0, + .mask_flags = MTD_CAP_ROM}, + { + .name = "u-boot", + .size = 0x42000, + .offset = MTDPART_OFS_APPEND, + }, + { + .name = "u-boot(params)", + .size = 0x4200, + .offset = MTDPART_OFS_APPEND, + }, + { + .name = "kernel", + .size = 0x294000, + .offset = MTDPART_OFS_APPEND, + }, + { + .name = "params", + .size = 0x42000, + .offset = MTDPART_OFS_APPEND, + }, + { + .name = "rootfs", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct flash_platform_data bfin_spi_dataflash_data = { + .name = "SPI Dataflash", + .parts = bfin_spi_dataflash_partitions, + .nr_parts = ARRAY_SIZE(bfin_spi_dataflash_partitions), +}; + +/* DataFlash chip */ +static struct bfin5xx_spi_chip data_flash_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip */ + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +static struct bfin5xx_spi_chip spidev_chip_info = { + .enable_dma = 0, + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = IRQ_SPI, + .end = IRQ_SPI, + .flags = IORESOURCE_IRQ, + }, +}; + +/* SPI controller data */ +static struct bfin5xx_spi_master bfin_spi0_info = { + .num_chipselect = 8, + .enable_dma = 1, /* master has the ability to do dma transfer */ + .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, +}; + +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, + .dev = { + .platform_data = &bfin_spi0_info, /* Passed to driver */ + }, +}; +#endif + +static struct spi_board_info bfin_spi_board_info[] __initdata = { +#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) + { + .modalias = "spidev", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 3, + .controller_data = &spidev_chip_info, + }, +#endif +#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE) + { /* DataFlash chip */ + .modalias = "mtd_dataflash", + .max_speed_hz = 33250000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 2, /* Framework chip select */ + .platform_data = &bfin_spi_dataflash_data, + .controller_data = &data_flash_chip_info, + .mode = SPI_MODE_3, + }, +#endif +}; + +static struct resource bfin_gpios_resources = { + .start = 31, +/* .end = MAX_BLACKFIN_GPIOS - 1, */ + .end = 32, + .flags = IORESOURCE_IRQ, +}; + +static struct platform_device bfin_gpios_device = { + .name = "simple-gpio", + .id = -1, + .num_resources = 1, + .resource = &bfin_gpios_resources, +}; + +static const unsigned int cclk_vlev_datasheet[] = { + VRPAIR(VLEV_085, 250000000), + VRPAIR(VLEV_090, 300000000), + VRPAIR(VLEV_095, 313000000), + VRPAIR(VLEV_100, 350000000), + VRPAIR(VLEV_105, 400000000), + VRPAIR(VLEV_110, 444000000), + VRPAIR(VLEV_115, 450000000), + VRPAIR(VLEV_120, 475000000), + VRPAIR(VLEV_125, 500000000), + VRPAIR(VLEV_130, 600000000), +}; + +static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = { + .tuple_tab = cclk_vlev_datasheet, + .tabsize = ARRAY_SIZE(cclk_vlev_datasheet), + .vr_settling_time = 25 /* us */ , +}; + +static struct platform_device bfin_dpmc = { + .name = "bfin dpmc", + .dev = { + .platform_data = &bfin_dmpc_vreg_data, + }, +}; + +static struct platform_device *acvilon_devices[] __initdata = { + &bfin_dpmc, + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + &bfin_spi0_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#endif + + &bfin_gpios_device, + +#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) + &smsc911x_device, +#endif + + &bfin_i2c_pca_device, + +#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) + &bfin_async_nand_device, +#endif + +#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE) + &mtd_ram_device, +#endif + +}; + +static int __init acvilon_init(void) +{ + int ret; + + printk(KERN_INFO "%s(): registering device resources\n", __func__); + + bfin_plat_nand_init(); + ret = + platform_add_devices(acvilon_devices, ARRAY_SIZE(acvilon_devices)); + if (ret < 0) + return ret; + + i2c_register_board_info(0, acvilon_i2c_devs, + ARRAY_SIZE(acvilon_i2c_devs)); + + bfin_write_FIO0_FLAG_C(1 << 14); + msleep(5); + bfin_write_FIO0_FLAG_S(1 << 14); + + spi_register_board_info(bfin_spi_board_info, + ARRAY_SIZE(bfin_spi_board_info)); + return 0; +} + +arch_initcall(acvilon_init); + +static struct platform_device *acvilon_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(acvilon_early_devices, + ARRAY_SIZE(acvilon_early_devices)); +} diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index 9e2d8cf..ffd3e6a 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -49,7 +49,7 @@ static struct isp1760_platform_data isp1760_priv = { }; static struct platform_device bfin_isp1760_device = { - .name = "isp1760-hcd", + .name = "isp1760", .id = 0, .dev = { .platform_data = &isp1760_priv, @@ -159,28 +159,6 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE) -static struct resource ax88180_resources[] = { - [0] = { - .start = 0x2c000000, - .end = 0x2c000000 + 0x8000, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PF10, - .end = IRQ_PF10, - .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL), - }, -}; - -static struct platform_device ax88180_device = { - .name = "ax88180", - .id = -1, - .num_resources = ARRAY_SIZE(ax88180_resources), - .resource = ax88180_resources, -}; -#endif - #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) static struct resource bfin_uart_resources[] = { { @@ -421,10 +399,6 @@ static struct platform_device *ezkit_devices[] __initdata = { &smc91x_device, #endif -#if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE) - &ax88180_device, -#endif - #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) &net2272_bfin_device, #endif diff --git a/arch/blackfin/mach-bf561/coreb.c b/arch/blackfin/mach-bf561/coreb.c index 1e60a92..deb2271 100644 --- a/arch/blackfin/mach-bf561/coreb.c +++ b/arch/blackfin/mach-bf561/coreb.c @@ -22,8 +22,8 @@ #define CMD_COREB_STOP 3 #define CMD_COREB_RESET 4 -static int -coreb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) +static long +coreb_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { int ret = 0; @@ -49,8 +49,8 @@ coreb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned l } static const struct file_operations coreb_fops = { - .owner = THIS_MODULE, - .ioctl = coreb_ioctl, + .owner = THIS_MODULE, + .unlocked_ioctl = coreb_ioctl, }; static struct miscdevice coreb_dev = { diff --git a/arch/blackfin/mach-bf561/include/mach/defBF561.h b/arch/blackfin/mach-bf561/include/mach/defBF561.h index a31e509..4c8e36b 100644 --- a/arch/blackfin/mach-bf561/include/mach/defBF561.h +++ b/arch/blackfin/mach-bf561/include/mach/defBF561.h @@ -884,65 +884,11 @@ /* System MMR Register Bits */ /******************************************************************************* */ -/* ********************* PLL AND RESET MASKS ************************ */ - -/* PLL_CTL Masks */ -#define PLL_CLKIN 0x00000000 /* Pass CLKIN to PLL */ -#define PLL_CLKIN_DIV2 0x00000001 /* Pass CLKIN/2 to PLL */ -#define PLL_OFF 0x00000002 /* Shut off PLL clocks */ -#define STOPCK_OFF 0x00000008 /* Core clock off */ -#define PDWN 0x00000020 /* Put the PLL in a Deep Sleep state */ -#define BYPASS 0x00000100 /* Bypass the PLL */ - /* CHIPID Masks */ #define CHIPID_VERSION 0xF0000000 #define CHIPID_FAMILY 0x0FFFF000 #define CHIPID_MANUFACTURE 0x00000FFE -/* VR_CTL Masks */ -#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */ -#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */ -#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */ -#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */ -#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */ - -#define GAIN 0x000C /* Voltage Level Gain */ -#define GAIN_5 0x0000 /* GAIN = 5*/ -#define GAIN_10 0x0004 /* GAIN = 1*/ -#define GAIN_20 0x0008 /* GAIN = 2*/ -#define GAIN_50 0x000C /* GAIN = 5*/ - -#define VLEV 0x00F0 /* Internal Voltage Level */ -#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ -#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ -#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ -#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ -#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ -#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ -#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ -#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ -#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */ -#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ - -#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ -#define SCKELOW 0x8000 /* Do Not Drive SCKE High During Reset After Hibernate */ - -/* PLL_DIV Masks */ -#define SCLK_DIV(x) (x) /* SCLK = VCO / x */ - -#define CSEL 0x30 /* Core Select */ -#define SSEL 0xf /* System Select */ -#define CCLK_DIV1 0x00000000 /* CCLK = VCO / 1 */ -#define CCLK_DIV2 0x00000010 /* CCLK = VCO / 2 */ -#define CCLK_DIV4 0x00000020 /* CCLK = VCO / 4 */ -#define CCLK_DIV8 0x00000030 /* CCLK = VCO / 8 */ - -/* PLL_STAT Masks */ -#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ -#define FULL_ON 0x0002 /* Processor In Full On Mode */ -#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */ -#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ - /* SICA_SYSCR Masks */ #define COREB_SRAM_INIT 0x0020 @@ -1150,53 +1096,6 @@ /* ********** DMA CONTROLLER MASKS *********************8 */ -/* DMAx_CONFIG, MDMA_yy_CONFIG, IMDMA_yy_CONFIG Masks */ -#define DMAEN 0x00000001 /* Channel Enable */ -#define WNR 0x00000002 /* Channel Direction (W/R*) */ -#define WDSIZE_8 0x00000000 /* Word Size 8 bits */ -#define WDSIZE_16 0x00000004 /* Word Size 16 bits */ -#define WDSIZE_32 0x00000008 /* Word Size 32 bits */ -#define DMA2D 0x00000010 /* 2D/1D* Mode */ -#define RESTART 0x00000020 /* Restart */ -#define DI_SEL 0x00000040 /* Data Interrupt Select */ -#define DI_EN 0x00000080 /* Data Interrupt Enable */ -#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ -#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ -#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ -#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ -#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ -#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ -#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ -#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ -#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ -#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ -#define NDSIZE 0x00000900 /* Next Descriptor Size */ -#define DMAFLOW 0x00007000 /* Flow Control */ -#define DMAFLOW_STOP 0x0000 /* Stop Mode */ -#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ -#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ -#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ -#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ - -#define DMAEN_P 0 /* Channel Enable */ -#define WNR_P 1 /* Channel Direction (W/R*) */ -#define DMA2D_P 4 /* 2D/1D* Mode */ -#define RESTART_P 5 /* Restart */ -#define DI_SEL_P 6 /* Data Interrupt Select */ -#define DI_EN_P 7 /* Data Interrupt Enable */ - -/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS, IMDMA_yy_IRQ_STATUS Masks */ - -#define DMA_DONE 0x00000001 /* DMA Done Indicator */ -#define DMA_ERR 0x00000002 /* DMA Error Indicator */ -#define DFETCH 0x00000004 /* Descriptor Fetch Indicator */ -#define DMA_RUN 0x00000008 /* DMA Running Indicator */ - -#define DMA_DONE_P 0 /* DMA Done Indicator */ -#define DMA_ERR_P 1 /* DMA Error Indicator */ -#define DFETCH_P 2 /* Descriptor Fetch Indicator */ -#define DMA_RUN_P 3 /* DMA Running Indicator */ - /* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP, IMDMA_yy_PERIPHERAL_MAP Masks */ #define CTYPE 0x00000040 /* DMA Channel Type Indicator */ diff --git a/arch/blackfin/mach-bf561/smp.c b/arch/blackfin/mach-bf561/smp.c index 510f576..0192532 100644 --- a/arch/blackfin/mach-bf561/smp.c +++ b/arch/blackfin/mach-bf561/smp.c @@ -52,8 +52,6 @@ int __init setup_profiling_timer(unsigned int multiplier) /* not supported */ void __cpuinit platform_secondary_init(unsigned int cpu) { - local_irq_disable(); - /* Clone setup for peripheral interrupt sources from CoreA. */ bfin_write_SICB_IMASK0(bfin_read_SICA_IMASK0()); bfin_write_SICB_IMASK1(bfin_read_SICA_IMASK1()); @@ -70,11 +68,6 @@ void __cpuinit platform_secondary_init(unsigned int cpu) bfin_write_SICB_IAR7(bfin_read_SICA_IAR7()); SSYNC(); - local_irq_enable(); - - /* Calibrate loops per jiffy value. */ - calibrate_delay(); - /* Store CPU-private information to the cpu_data array. */ bfin_setup_cpudata(cpu); @@ -108,9 +101,13 @@ int __cpuinit platform_boot_secondary(unsigned int cpu, struct task_struct *idle barrier(); } - spin_unlock(&boot_lock); - - return cpu_isset(cpu, cpu_callin_map) ? 0 : -ENOSYS; + if (cpu_isset(cpu, cpu_callin_map)) { + cpu_set(cpu, cpu_online_map); + /* release the lock and let coreb run */ + spin_unlock(&boot_lock); + return 0; + } else + panic("CPU%u: processor failed to boot\n", cpu); } void __init platform_request_ipi(irq_handler_t handler) diff --git a/arch/blackfin/mach-common/clocks-init.c b/arch/blackfin/mach-common/clocks-init.c index ef6870e..d5cfe61 100644 --- a/arch/blackfin/mach-common/clocks-init.c +++ b/arch/blackfin/mach-common/clocks-init.c @@ -13,6 +13,7 @@ #include <asm/dma.h> #include <asm/clocks.h> #include <asm/mem_init.h> +#include <asm/dpmc.h> #define SDGCTL_WIDTH (1 << 31) /* SDRAM external data path width */ #define PLL_CTL_VAL \ diff --git a/arch/blackfin/mach-common/cpufreq.c b/arch/blackfin/mach-common/cpufreq.c index 0150650..7775828 100644 --- a/arch/blackfin/mach-common/cpufreq.c +++ b/arch/blackfin/mach-common/cpufreq.c @@ -13,7 +13,7 @@ #include <linux/fs.h> #include <asm/blackfin.h> #include <asm/time.h> - +#include <asm/dpmc.h> /* this is the table of CCLK frequencies, in Hz */ /* .index is the entry in the auxillary dpm_state_table[] */ @@ -138,7 +138,8 @@ static int __init __bfin_cpu_init(struct cpufreq_policy *policy) dpm_state_table[index].tscale); } - policy->cpuinfo.transition_latency = (bfin_read_PLL_LOCKCNT() / (sclk / 1000000)) * 1000; + policy->cpuinfo.transition_latency = 50000; /* 50us assumed */ + /*Now ,only support one cpu */ policy->cur = cclk; cpufreq_frequency_table_get_attr(bfin_freq_table, policy->cpu); diff --git a/arch/blackfin/mach-common/dpmc_modes.S b/arch/blackfin/mach-common/dpmc_modes.S index 8009a51..b037168 100644 --- a/arch/blackfin/mach-common/dpmc_modes.S +++ b/arch/blackfin/mach-common/dpmc_modes.S @@ -404,6 +404,21 @@ ENTRY(_do_hibernate) PM_SYS_PUSH(EBIU_FCTL) #endif +#ifdef PORTCIO_FER + PM_SYS_PUSH16(PORTCIO_DIR) + PM_SYS_PUSH16(PORTCIO_INEN) + PM_SYS_PUSH16(PORTCIO) + PM_SYS_PUSH16(PORTCIO_FER) + PM_SYS_PUSH16(PORTDIO_DIR) + PM_SYS_PUSH16(PORTDIO_INEN) + PM_SYS_PUSH16(PORTDIO) + PM_SYS_PUSH16(PORTDIO_FER) + PM_SYS_PUSH16(PORTEIO_DIR) + PM_SYS_PUSH16(PORTEIO_INEN) + PM_SYS_PUSH16(PORTEIO) + PM_SYS_PUSH16(PORTEIO_FER) +#endif + PM_SYS_PUSH16(SYSCR) /* Save Core MMRs */ @@ -716,6 +731,21 @@ ENTRY(_do_hibernate) P0.L = lo(PLL_CTL); PM_SYS_POP16(SYSCR) +#ifdef PORTCIO_FER + PM_SYS_POP16(PORTEIO_FER) + PM_SYS_POP16(PORTEIO) + PM_SYS_POP16(PORTEIO_INEN) + PM_SYS_POP16(PORTEIO_DIR) + PM_SYS_POP16(PORTDIO_FER) + PM_SYS_POP16(PORTDIO) + PM_SYS_POP16(PORTDIO_INEN) + PM_SYS_POP16(PORTDIO_DIR) + PM_SYS_POP16(PORTCIO_FER) + PM_SYS_POP16(PORTCIO) + PM_SYS_POP16(PORTCIO_INEN) + PM_SYS_POP16(PORTCIO_DIR) +#endif + #ifdef EBIU_FCTL PM_SYS_POP(EBIU_FCTL) PM_SYS_POP(EBIU_MODE) diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index f3f8bb4..b0ed0b4 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -713,6 +713,8 @@ ENTRY(_system_call) cc = BITTST(r7, TIF_RESTORE_SIGMASK); if cc jump .Lsyscall_do_signals; cc = BITTST(r7, TIF_SIGPENDING); + if cc jump .Lsyscall_do_signals; + cc = BITTST(r7, TIF_NOTIFY_RESUME); if !cc jump .Lsyscall_really_exit; .Lsyscall_do_signals: /* Reenable interrupts. */ @@ -721,7 +723,7 @@ ENTRY(_system_call) r0 = sp; SP += -12; - call _do_signal; + call _do_notify_resume; SP += 12; .Lsyscall_really_exit: diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index 660ea1b..1873b2c 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -25,11 +25,20 @@ #include <asm/blackfin.h> #include <asm/gpio.h> #include <asm/irq_handler.h> +#include <asm/dpmc.h> +#include <asm/bfin5xx_spi.h> +#include <asm/bfin_sport.h> #define SIC_SYSIRQ(irq) (irq - (IRQ_CORETMR + 1)) #ifdef BF537_FAMILY # define BF537_GENERIC_ERROR_INT_DEMUX +# define SPI_ERR_MASK (BIT_STAT_TXCOL | BIT_STAT_RBSY | BIT_STAT_MODF | BIT_STAT_TXE) /* SPI_STAT */ +# define SPORT_ERR_MASK (ROVF | RUVF | TOVF | TUVF) /* SPORT_STAT */ +# define PPI_ERR_MASK (0xFFFF & ~FLD) /* PPI_STATUS */ +# define EMAC_ERR_MASK (PHYINT | MMCINT | RXFSINT | TXFSINT | WAKEDET | RXDMAERR | TXDMAERR | STMDONE) /* EMAC_SYSTAT */ +# define UART_ERR_MASK (0x6) /* UART_IIR */ +# define CAN_ERR_MASK (EWTIF | EWRIF | EPIF | BOIF | WUIF | UIAIF | AAIF | RMLIF | UCEIF | EXTIF | ADIF) /* CAN_GIF */ #else # undef BF537_GENERIC_ERROR_INT_DEMUX #endif @@ -324,11 +333,9 @@ static void bfin_demux_error_irq(unsigned int int_err_irq, irq = IRQ_CAN_ERROR; else if (bfin_read_SPI_STAT() & SPI_ERR_MASK) irq = IRQ_SPI_ERROR; - else if ((bfin_read_UART0_IIR() & UART_ERR_MASK_STAT1) && - (bfin_read_UART0_IIR() & UART_ERR_MASK_STAT0)) + else if ((bfin_read_UART0_IIR() & UART_ERR_MASK) == UART_ERR_MASK) irq = IRQ_UART0_ERROR; - else if ((bfin_read_UART1_IIR() & UART_ERR_MASK_STAT1) && - (bfin_read_UART1_IIR() & UART_ERR_MASK_STAT0)) + else if ((bfin_read_UART1_IIR() & UART_ERR_MASK) == UART_ERR_MASK) irq = IRQ_UART1_ERROR; if (irq) { diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c index d92b168..369e687 100644 --- a/arch/blackfin/mach-common/smp.c +++ b/arch/blackfin/mach-common/smp.c @@ -336,13 +336,6 @@ int __cpuinit __cpu_up(unsigned int cpu) ret = platform_boot_secondary(cpu, idle); - if (ret) { - cpu_clear(cpu, cpu_present_map); - printk(KERN_CRIT "CPU%u: processor failed to boot (%d)\n", cpu, ret); - free_task(idle); - } else - cpu_set(cpu, cpu_online_map); - secondary_stack = NULL; return ret; @@ -418,9 +411,16 @@ void __cpuinit secondary_start_kernel(void) setup_secondary(cpu); + platform_secondary_init(cpu); + local_irq_enable(); - platform_secondary_init(cpu); + /* + * Calibrate loops per jiffy value. + * IRQs need to be enabled here - D-cache can be invalidated + * in timer irq handler, so core B can read correct jiffies. + */ + calibrate_delay(); cpu_idle(); } diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 6f31c94..31be3ac 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -502,7 +502,7 @@ config BRIQ_PANEL config BFIN_OTP tristate "Blackfin On-Chip OTP Memory Support" - depends on BLACKFIN && (BF52x || BF54x) + depends on BLACKFIN && (BF51x || BF52x || BF54x) default y help If you say Y here, you will get support for a character device |