diff options
| -rw-r--r-- | drivers/input/keyboard/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/input/keyboard/Makefile | 1 | ||||
| -rw-r--r-- | drivers/input/keyboard/adp5588-keys.c | 361 | ||||
| -rw-r--r-- | include/linux/i2c/adp5588.h | 92 |
4 files changed, 464 insertions, 0 deletions
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index b14bd3a..d615c09 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -24,6 +24,16 @@ config KEYBOARD_AAED2000 To compile this driver as a module, choose M here: the module will be called aaed2000_kbd. +config KEYBOARD_ADP5588 + tristate "ADP5588 I2C QWERTY Keypad and IO Expander" + depends on I2C + help + Say Y here if you want to use a ADP5588 attached to your + system I2C bus. + + To compile this driver as a module, choose M here: the + module will be called adp5588-keys. + config KEYBOARD_AMIGA tristate "Amiga keyboard" depends on AMIGA diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index ab35ac3..a5c08cd 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -5,6 +5,7 @@ # Each configuration option enables a list of files. obj-$(CONFIG_KEYBOARD_AAED2000) += aaed2000_kbd.o +obj-$(CONFIG_KEYBOARD_ADP5588) += adp5588-keys.o obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o obj-$(CONFIG_KEYBOARD_ATARI) += atakbd.o obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c new file mode 100644 index 0000000..d48c808 --- /dev/null +++ b/drivers/input/keyboard/adp5588-keys.c @@ -0,0 +1,361 @@ +/* + * File: drivers/input/keyboard/adp5588_keys.c + * Description: keypad driver for ADP5588 I2C QWERTY Keypad and IO Expander + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * Copyright (C) 2008-2009 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +#include <linux/module.h> +#include <linux/version.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/workqueue.h> +#include <linux/errno.h> +#include <linux/pm.h> +#include <linux/platform_device.h> +#include <linux/input.h> +#include <linux/i2c.h> + +#include <linux/i2c/adp5588.h> + + /* Configuration Register1 */ +#define AUTO_INC (1 << 7) +#define GPIEM_CFG (1 << 6) +#define OVR_FLOW_M (1 << 5) +#define INT_CFG (1 << 4) +#define OVR_FLOW_IEN (1 << 3) +#define K_LCK_IM (1 << 2) +#define GPI_IEN (1 << 1) +#define KE_IEN (1 << 0) + +/* Interrupt Status Register */ +#define CMP2_INT (1 << 5) +#define CMP1_INT (1 << 4) +#define OVR_FLOW_INT (1 << 3) +#define K_LCK_INT (1 << 2) +#define GPI_INT (1 << 1) +#define KE_INT (1 << 0) + +/* Key Lock and Event Counter Register */ +#define K_LCK_EN (1 << 6) +#define LCK21 0x30 +#define KEC 0xF + +/* Key Event Register xy */ +#define KEY_EV_PRESSED (1 << 7) +#define KEY_EV_MASK (0x7F) + +#define KP_SEL(x) (0xFFFF >> (16 - x)) /* 2^x-1 */ + +#define KEYP_MAX_EVENT 10 + +/* + * Early pre 4.0 Silicon required to delay readout by at least 25ms, + * since the Event Counter Register updated 25ms after the interrupt + * asserted. + */ +#define WA_DELAYED_READOUT_REVID(rev) ((rev) < 4) + +struct adp5588_kpad { + struct i2c_client *client; + struct input_dev *input; + struct delayed_work work; + unsigned long delay; + unsigned short keycode[ADP5588_KEYMAPSIZE]; +}; + +static int adp5588_read(struct i2c_client *client, u8 reg) +{ + int ret = i2c_smbus_read_byte_data(client, reg); + + if (ret < 0) + dev_err(&client->dev, "Read Error\n"); + + return ret; +} + +static int adp5588_write(struct i2c_client *client, u8 reg, u8 val) +{ + return i2c_smbus_write_byte_data(client, reg, val); +} + +static void adp5588_work(struct work_struct *work) +{ + struct adp5588_kpad *kpad = container_of(work, + struct adp5588_kpad, work.work); + struct i2c_client *client = kpad->client; + int i, key, status, ev_cnt; + + status = adp5588_read(client, INT_STAT); + + if (status & OVR_FLOW_INT) /* Unlikely and should never happen */ + dev_err(&client->dev, "Event Overflow Error\n"); + + if (status & KE_INT) { + ev_cnt = adp5588_read(client, KEY_LCK_EC_STAT) & KEC; + if (ev_cnt) { + for (i = 0; i < ev_cnt; i++) { + key = adp5588_read(client, Key_EVENTA + i); + input_report_key(kpad->input, + kpad->keycode[(key & KEY_EV_MASK) - 1], + key & KEY_EV_PRESSED); + } + input_sync(kpad->input); + } + } + adp5588_write(client, INT_STAT, status); /* Status is W1C */ +} + +static irqreturn_t adp5588_irq(int irq, void *handle) +{ + struct adp5588_kpad *kpad = handle; + + /* + * use keventd context to read the event fifo registers + * Schedule readout at least 25ms after notification for + * REVID < 4 + */ + + schedule_delayed_work(&kpad->work, kpad->delay); + + return IRQ_HANDLED; +} + +static int __devinit adp5588_setup(struct i2c_client *client) +{ + struct adp5588_kpad_platform_data *pdata = client->dev.platform_data; + int i, ret; + + ret = adp5588_write(client, KP_GPIO1, KP_SEL(pdata->rows)); + ret |= adp5588_write(client, KP_GPIO2, KP_SEL(pdata->cols) & 0xFF); + ret |= adp5588_write(client, KP_GPIO3, KP_SEL(pdata->cols) >> 8); + + if (pdata->en_keylock) { + ret |= adp5588_write(client, UNLOCK1, pdata->unlock_key1); + ret |= adp5588_write(client, UNLOCK2, pdata->unlock_key2); + ret |= adp5588_write(client, KEY_LCK_EC_STAT, K_LCK_EN); + } + + for (i = 0; i < KEYP_MAX_EVENT; i++) + ret |= adp5588_read(client, Key_EVENTA); + + ret |= adp5588_write(client, INT_STAT, CMP2_INT | CMP1_INT | + OVR_FLOW_INT | K_LCK_INT | + GPI_INT | KE_INT); /* Status is W1C */ + + ret |= adp5588_write(client, CFG, INT_CFG | OVR_FLOW_IEN | KE_IEN); + + if (ret < 0) { + dev_err(&client->dev, "Write Error\n"); + return ret; + } + + return 0; +} + +static int __devinit adp5588_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adp5588_kpad *kpad; + struct adp5588_kpad_platform_data *pdata = client->dev.platform_data; + struct input_dev *input; + unsigned int revid; + int ret, i; + int error; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_err(&client->dev, "SMBUS Byte Data not Supported\n"); + return -EIO; + } + + if (!pdata) { + dev_err(&client->dev, "no platform data?\n"); + return -EINVAL; + } + + if (!pdata->rows || !pdata->cols || !pdata->keymap) { + dev_err(&client->dev, "no rows, cols or keymap from pdata\n"); + return -EINVAL; + } + + if (pdata->keymapsize != ADP5588_KEYMAPSIZE) { + dev_err(&client->dev, "invalid keymapsize\n"); + return -EINVAL; + } + + if (!client->irq) { + dev_err(&client->dev, "no IRQ?\n"); + return -EINVAL; + } + + kpad = kzalloc(sizeof(*kpad), GFP_KERNEL); + input = input_allocate_device(); + if (!kpad || !input) { + error = -ENOMEM; + goto err_free_mem; + } + + kpad->client = client; + kpad->input = input; + INIT_DELAYED_WORK(&kpad->work, adp5588_work); + + ret = adp5588_read(client, DEV_ID); + if (ret < 0) { + error = ret; + goto err_free_mem; + } + + revid = (u8) ret & ADP5588_DEVICE_ID_MASK; + if (WA_DELAYED_READOUT_REVID(revid)) + kpad->delay = msecs_to_jiffies(30); + + input->name = client->name; + input->phys = "adp5588-keys/input0"; + input->dev.parent = &client->dev; + + input_set_drvdata(input, kpad); + + input->id.bustype = BUS_I2C; + input->id.vendor = 0x0001; + input->id.product = 0x0001; + input->id.version = revid; + + input->keycodesize = sizeof(kpad->keycode[0]); + input->keycodemax = pdata->keymapsize; + input->keycode = kpad->keycode; + + memcpy(kpad->keycode, pdata->keymap, + pdata->keymapsize * input->keycodesize); + + /* setup input device */ + __set_bit(EV_KEY, input->evbit); + + if (pdata->repeat) + __set_bit(EV_REP, input->evbit); + + for (i = 0; i < input->keycodemax; i++) + __set_bit(kpad->keycode[i] & KEY_MAX, input->keybit); + __clear_bit(KEY_RESERVED, input->keybit); + + error = input_register_device(input); + if (error) { + dev_err(&client->dev, "unable to register input device\n"); + goto err_free_mem; + } + + error = request_irq(client->irq, adp5588_irq, + IRQF_TRIGGER_FALLING | IRQF_DISABLED, + client->dev.driver->name, kpad); + if (error) { + dev_err(&client->dev, "irq %d busy?\n", client->irq); + goto err_unreg_dev; + } + + error = adp5588_setup(client); + if (error) + goto err_free_irq; + + device_init_wakeup(&client->dev, 1); + i2c_set_clientdata(client, kpad); + + dev_info(&client->dev, "Rev.%d keypad, irq %d\n", revid, client->irq); + return 0; + + err_free_irq: + free_irq(client->irq, kpad); + err_unreg_dev: + input_unregister_device(input); + input = NULL; + err_free_mem: + input_free_device(input); + kfree(kpad); + + return error; +} + +static int __devexit adp5588_remove(struct i2c_client *client) +{ + struct adp5588_kpad *kpad = i2c_get_clientdata(client); + + adp5588_write(client, CFG, 0); + free_irq(client->irq, kpad); + cancel_delayed_work_sync(&kpad->work); + input_unregister_device(kpad->input); + i2c_set_clientdata(client, NULL); + kfree(kpad); + + return 0; +} + +#ifdef CONFIG_PM +static int adp5588_suspend(struct device *dev) +{ + struct adp5588_kpad *kpad = dev_get_drvdata(dev); + struct i2c_client *client = kpad->client; + + disable_irq(client->irq); + cancel_delayed_work_sync(&kpad->work); + + if (device_may_wakeup(&client->dev)) + enable_irq_wake(client->irq); + + return 0; +} + +static int adp5588_resume(struct device *dev) +{ + struct adp5588_kpad *kpad = dev_get_drvdata(dev); + struct i2c_client *client = kpad->client; + + if (device_may_wakeup(&client->dev)) + disable_irq_wake(client->irq); + + enable_irq(client->irq); + + return 0; +} + +static struct dev_pm_ops adp5588_dev_pm_ops = { + .suspend = adp5588_suspend, + .resume = adp5588_resume, +}; +#endif + +static const struct i2c_device_id adp5588_id[] = { + { KBUILD_MODNAME, 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adp5588_id); + +static struct i2c_driver adp5588_driver = { + .driver = { + .name = KBUILD_MODNAME, +#ifdef CONFIG_PM + .pm = &adp5588_dev_pm_ops, +#endif + }, + .probe = adp5588_probe, + .remove = __devexit_p(adp5588_remove), + .id_table = adp5588_id, +}; + +static int __init adp5588_init(void) +{ + return i2c_add_driver(&adp5588_driver); +} +module_init(adp5588_init); + +static void __exit adp5588_exit(void) +{ + i2c_del_driver(&adp5588_driver); +} +module_exit(adp5588_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); +MODULE_DESCRIPTION("ADP5588 Keypad driver"); +MODULE_ALIAS("platform:adp5588-keys"); diff --git a/include/linux/i2c/adp5588.h b/include/linux/i2c/adp5588.h new file mode 100644 index 0000000..fc5db82 --- /dev/null +++ b/include/linux/i2c/adp5588.h @@ -0,0 +1,92 @@ +/* + * Analog Devices ADP5588 I/O Expander and QWERTY Keypad Controller + * + * Copyright 2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _ADP5588_H +#define _ADP5588_H + +#define DEV_ID 0x00 /* Device ID */ +#define CFG 0x01 /* Configuration Register1 */ +#define INT_STAT 0x02 /* Interrupt Status Register */ +#define KEY_LCK_EC_STAT 0x03 /* Key Lock and Event Counter Register */ +#define Key_EVENTA 0x04 /* Key Event Register A */ +#define Key_EVENTB 0x05 /* Key Event Register B */ +#define Key_EVENTC 0x06 /* Key Event Register C */ +#define Key_EVENTD 0x07 /* Key Event Register D */ +#define Key_EVENTE 0x08 /* Key Event Register E */ +#define Key_EVENTF 0x09 /* Key Event Register F */ +#define Key_EVENTG 0x0A /* Key Event Register G */ +#define Key_EVENTH 0x0B /* Key Event Register H */ +#define Key_EVENTI 0x0C /* Key Event Register I */ +#define Key_EVENTJ 0x0D /* Key Event Register J */ +#define KP_LCK_TMR 0x0E /* Keypad Lock1 to Lock2 Timer */ +#define UNLOCK1 0x0F /* Unlock Key1 */ +#define UNLOCK2 0x10 /* Unlock Key2 */ +#define GPIO_INT_STAT1 0x11 /* GPIO Interrupt Status */ +#define GPIO_INT_STAT2 0x12 /* GPIO Interrupt Status */ +#define GPIO_INT_STAT3 0x13 /* GPIO Interrupt Status */ +#define GPIO_DAT_STAT1 0x14 /* GPIO Data Status, Read twice to clear */ +#define GPIO_DAT_STAT2 0x15 /* GPIO Data Status, Read twice to clear */ +#define GPIO_DAT_STAT3 0x16 /* GPIO Data Status, Read twice to clear */ +#define GPIO_DAT_OUT1 0x17 /* GPIO DATA OUT */ +#define GPIO_DAT_OUT2 0x18 /* GPIO DATA OUT */ +#define GPIO_DAT_OUT3 0x19 /* GPIO DATA OUT */ +#define GPIO_INT_EN1 0x1A /* GPIO Interrupt Enable */ +#define GPIO_INT_EN2 0x1B /* GPIO Interrupt Enable */ +#define GPIO_INT_EN3 0x1C /* GPIO Interrupt Enable */ +#define KP_GPIO1 0x1D /* Keypad or GPIO Selection */ +#define KP_GPIO2 0x1E /* Keypad or GPIO Selection */ +#define KP_GPIO3 0x1F /* Keypad or GPIO Selection */ +#define GPI_EM1 0x20 /* GPI Event Mode 1 */ +#define GPI_EM2 0x21 /* GPI Event Mode 2 */ +#define GPI_EM3 0x22 /* GPI Event Mode 3 */ +#define GPIO_DIR1 0x23 /* GPIO Data Direction */ +#define GPIO_DIR2 0x24 /* GPIO Data Direction */ +#define GPIO_DIR3 0x25 /* GPIO Data Direction */ +#define GPIO_INT_LVL1 0x26 /* GPIO Edge/Level Detect */ +#define GPIO_INT_LVL2 0x27 /* GPIO Edge/Level Detect */ +#define GPIO_INT_LVL3 0x28 /* GPIO Edge/Level Detect */ +#define Debounce_DIS1 0x29 /* Debounce Disable */ +#define Debounce_DIS2 0x2A /* Debounce Disable */ +#define Debounce_DIS3 0x2B /* Debounce Disable */ +#define GPIO_PULL1 0x2C /* GPIO Pull Disable */ +#define GPIO_PULL2 0x2D /* GPIO Pull Disable */ +#define GPIO_PULL3 0x2E /* GPIO Pull Disable */ +#define CMP_CFG_STAT 0x30 /* Comparator Configuration and Status Register */ +#define CMP_CONFG_SENS1 0x31 /* Sensor1 Comparator Configuration Register */ +#define CMP_CONFG_SENS2 0x32 /* L2 Light Sensor Reference Level, Output Falling for Sensor 1 */ +#define CMP1_LVL2_TRIP 0x33 /* L2 Light Sensor Hysteresis (Active when Output Rising) for Sensor 1 */ +#define CMP1_LVL2_HYS 0x34 /* L3 Light Sensor Reference Level, Output Falling For Sensor 1 */ +#define CMP1_LVL3_TRIP 0x35 /* L3 Light Sensor Hysteresis (Active when Output Rising) For Sensor 1 */ +#define CMP1_LVL3_HYS 0x36 /* Sensor 2 Comparator Configuration Register */ +#define CMP2_LVL2_TRIP 0x37 /* L2 Light Sensor Reference Level, Output Falling for Sensor 2 */ +#define CMP2_LVL2_HYS 0x38 /* L2 Light Sensor Hysteresis (Active when Output Rising) for Sensor 2 */ +#define CMP2_LVL3_TRIP 0x39 /* L3 Light Sensor Reference Level, Output Falling For Sensor 2 */ +#define CMP2_LVL3_HYS 0x3A /* L3 Light Sensor Hysteresis (Active when Output Rising) For Sensor 2 */ +#define CMP1_ADC_DAT_R1 0x3B /* Comparator 1 ADC data Register1 */ +#define CMP1_ADC_DAT_R2 0x3C /* Comparator 1 ADC data Register2 */ +#define CMP2_ADC_DAT_R1 0x3D /* Comparator 2 ADC data Register1 */ +#define CMP2_ADC_DAT_R2 0x3E /* Comparator 2 ADC data Register2 */ + +#define ADP5588_DEVICE_ID_MASK 0xF + +/* Put one of these structures in i2c_board_info platform_data */ + +#define ADP5588_KEYMAPSIZE 80 + +struct adp5588_kpad_platform_data { + int rows; /* Number of rows */ + int cols; /* Number of columns */ + const unsigned short *keymap; /* Pointer to keymap */ + unsigned short keymapsize; /* Keymap size */ + unsigned repeat:1; /* Enable key repeat */ + unsigned en_keylock:1; /* Enable Key Lock feature */ + unsigned short unlock_key1; /* Unlock Key 1 */ + unsigned short unlock_key2; /* Unlock Key 2 */ +}; + +#endif |